www.atlascopco.com

Rec max dia. of Sound Max Tungsten Recom- level free carbide Mounted Max Air consumption mended at free Ordering No. speed burrs point output Weight Length at max output at free speed air hose speed with colletModel r/min mm mm kW hp kg lb mm l/s cfm l/s cfm mm in dB(A) 6 mm 1/4” Die grinders - Straight modelLSF 28 S250 25 000 12 32 0.86 1.15 0.75 1.65 210 18.5 39.2 11.0 23.3 10 3/8 75 8423 1235 11 8423 1235 37LSF 28 S250E 25 000 12 32 0.86 1.15 1.25 2.75 335 18.5 39.2 11.0 23.3 10 3/8 75 8423 1235 60LSF 28 S250E-R 25 000 12 32 0.86 1.15 1.25 2.75 335 18.5 39.2 11.0 23.3 10 3/8 75 8423 1235 49LSF 28 S250-R 25 000 12 32 0.86 1.15 0.75 1.65 210 18.5 39.2 11.0 23.3 10 3/8 75 8423 1235 48LSF 28 S180 18 000 16 40 0.82 1.10 0.75 1.65 210 17.4 36.9 11.0 23.3 10 3/8 69 8423 1235 04LSF 28 S180E 18 000 16 40 0.82 1.10 1.25 2.75 335 17.4 36.9 7.0 14.8 10 3/8 69 8423 1235 05LSF 28 S180E-1R 18 000 16 40 0.82 1.10 1.25 2.75 335 17.4 36.9 7.0 14.8 10 3/8 69 8423 1235 42LSF 28 S180-1R 18 000 16 40 0.82 1.10 0.75 1.65 210 17.4 36.9 7.0 14.8 10 3/8 69 8423 1235 41LSF 28 S150 15 000 16 40 0.70 0.94 0.75 1.65 210 15.0 31.8 5.5 11.7 10 3/8 66 8423 1235 64LSF 28 S150E 15 000 16 40 0.70 0.94 1.25 2.75 335 15.0 31.8 4.3 9.1 10 3/8 66 8423 1235 61LSF 28 120 12 000 16 40 0.66 0.89 0.75 1.65 210 13.8 29.3 4.0 8.5 10 3/8 65 8423 1235 67Die grinders - Angle head models

LSV 28 S150 15 000 16 40 0.68 0.91 1.15 2.53 250 17.0 36.0 8.3 17.6 10 3/8 78 8423 0125 54Die grinders - For polishing

LSF 28 ST030LF 3 000 0.67 0.90 1.16 2.55 275 18.0 38.2 8.6 18.2 10 3/8 73 8423 1235 63 LSF 28 ST030ELF 3 000 0.67 0.90 1.76 3.87 400 18.0 38.2 8.6 18.2 10 3/8 73 8423 1235 62LSF 28 ST070 7 000 0.76 1.02 1.16 2.55 275 18.9 40.1 12.4 26.3 10 3/8 75 8423 1235 66LSF 28 ST070E 7 000 0.75 1.02 1.76 3.87 400 18.9 40.1 12.4 26.3 10 3/8 75 8423 1235 65

Accessories included Optional accessoriesCollet and spanner for collet Collet, dia. Ordering No. Collet, dia. Ordering No.Air hose, air hose nipple and clamp 3 mm 4150 0081 00 1/4” 4150 0076 00Exhaust hose 6 mm 4150 0075 00 Collet nut 4150 0760 00 8 mm 4150 0074 00

Recommended Height over Air consumption Sound level Max free wheel Max spindle at max at free Spindle Recommended at free speed dimensions, mm output Weight end output speed thread air hose speed Model r/min DxTxH kW hp kg lb mm l/s cfm l/s cfm UNF mm in dB(A) Ordering No. LSV 28 ST12-10 12 000 100x7x16 0.75 1.0 1.7 3.7 76 17.4 36.9 7.5 15.9 3/8” 10 3/8” 75 8423 0125 14LSV 28 ST12-12 12 000 115x7x22 0.75 1.0 1.7 3.7 76 17.4 36.9 7.5 15.9 3/8” 10 3/8” 75 8423 0125 16LSV 28 ST12-13 12 000 125x7x22 0.75 1.0 1.7 3.7 76 17.4 36.9 7.5 15.9 3/8” 10 3/8” 75 8423 0125 17Accessories included . Wheel guard. Flanges . Support handle . Air hose, air hose nipple, hose clamp . Exhaust hose. Wrenches

Height Air Sound Max Recommended over consumption level free pad dimensions Max spindle at max at free Recommended at free speed max dia output Weight Length end output speed Spindle air hose speed Model r/min mm kW hp kg lb mm mm l/s cfm l/s cfm thread mm in dB(A) Ordering No.LSV 28 S060 6 000 180 0.73 0.98 1.5 3.2 265 87 16 33.9 7,3 15.5 UNC 5/8”-11 10 3/8 73 8423 0125 30 LSV 28 S060M14 6 000 180 0.73 0.98 1.5 3.2 265 87 16 33.9 7,3 15.5 M14 10 3/8 73 8423 0125 64 LSV 28 S060-18 6 000 180 0.73 0.98 2.5 5.4 265 87 16 33.9 7,3 15.5 UNC 5/8”-11 10 3/8 73 8423 0135 53 LSV 28 S040-01M14 4 000 180 0.62 0.83 1.5 3.2 265 87 15 31.8 5 10.6 M14 10 3/8 73 8423 0125 12 LSV 28 S040 4 000 180 0.62 0.83 1.5 3.2 265 87 15 31.8 4 8.5 UNC 5/8”-11 10 3/8 72 8423 0126 22 LSV 28 ST034 3 400 180 0.71 0.95 1.7 3.7 305 87 18 38.2 7.7 16.3 UNC 5/8”-11 10 3/8 77 8423 0135 80 LSV 28 S021 2 100 180 0.68 0.91 1.9 4.1 285 87 16 33.9 5.6 11.9 UNC 5/8”-11 10 3/8 71 8423 0125 19 LSV 28 S021M14 2 100 180 0.68 0.91 1.9 4.1 285 87 16 33.9 5.6 11.9 M14 10 3/8 71 8423 0125 72 LSV 28 ST018M14 1 800 180 0.74 0.99 1.7 3.7 305 87 19 40.3 13 27.6 M14 10 3/8 78 8423 0125 96 LSV 28 ST013M14 LF 1 300 180 0.68 0.91 1.7 3.7 285 87 20 42.4 9 19.1 M14 10 3/8 74 8423 0125 28 LSV 28 ST013-LF 1 300 180 0.68 0.91 1.7 3.7 285 87 20 42.4 9 19.1 UNC 5/8”-11 10 3/8 74 8423 0126 26 LSV 28 ST008-01 800 200 0.68 0.91 2.0 4.3 285 87 16 33.9 5.6 11.9 UNC 5/8”-11 10 3/8 74 8423 0125 51 Accessories included. Support handle. Air hose, air hose nipple, hose clamp. Exhaust hose Optional accessories Backing pad for dry sanding, fi ts both 5/8”-11 and M14 spindle thread Backing pad for wet sanding Accessories for polishing, velcro attachmentPad diameter Ordering No. Pin key for front nut* Pad diameter Ordering No. Max rpm Lamb’s wool bonnet. Backing pad125 mm 4150 1962 80 4080 1169 00 180 mm 4170 0428 83 2500 Pad diameter Ordering No Ordering No. Max rpm180 mm 4150 1962 81 4080 1169 00 150 mm 4112 6093 15 4112 6092 15 2 500*To be ordered separately, not included with pad

Max recom- Sound mended Spindle level Max free wheel diam. thread Air consumption Recommended at free speed DxTxH and Max output Weight Length at max output at free speed air hose speed Model r/min mm length kW hp kg lb mm l/s cfm l/s cfm mm in dB(A) Ordering No. LSR 28 S180-05 18 000 50x13x10 UNF 3/8”x42 0.82 1.09 1.86 4.09 340 19.8 42.0 7.3 15.5 10 3/8 76 8423 1325 04 LSR 28 S150-10 15 000 100x13x20 UNC 1/2”x42 0.72 0.94 2.16 4.75 340 18.0 28.2 5.8 12.3 10 3/8 67 8423 1325 02 LSR 28 S110-08 11 000 80x13x10 UNF 3/8”x42 0.62 0.83 1.9 4.18 340 15.8 33.5 3.6 7.6 10 3/8 67 8423 1325 03 Accessories included. Wheel guard, size according to type. Flanges. Air hose, air hose nipple, hose clamp. Exhaust hose Sound level Max free Air consumption Recommended at free speed Max output Weight Length at max output at free speed air hose speed Model r/min kW hp kg lb mm l/s cfm l/s cfm mm in dB(A) Ordering No. LSR 28 S120-CW 12 000 0.66 0.88 1.16 2.6 305 15.8 33.5 4.3 8.6 10 3/8 65 8423 1325 05 LSR 28 S150-CW 15 000 0.70 0.94 1.16 2.6 305 18.0 38.2 5.8 12.3 10 3/8 72 8423 1325 06

Accessories included. Air hose, air hose nipple, hose clamp. Exhaust hose Optional accessories Adapter for cone wheel Service kits Thread Ordering No. LSF 28 4081 0315 90 UNC/W 3/8” 4150 0318 00 LSV 28 4081 0317 90 UNF 3/8” 4150 0318 01 LSR 28 4081 0315 90 UNC” 4150 1357 00 UNC/W 5/8” 4150 0767 00

Atlas Copco Grinder series-28Productivity from power, comfort and control

9833

165

3 01

E.C

.O R

ekla

mb

yrå

AB

. Ått

a.45

Try

cker

i AB

200

8:1

200 Grinders

Grin

ders

Rec. max dia of Max Tungsten Mount- Air consumption at Air free carbide ed Rec. inlet Ordering No. speed burrs point Max output Weight Length max output free speed hose size thread with collet Model r/min mm mm kW hp kg lb mm l/s cfm l/s cfm mm in BSP 6 mm 1/4"Straight models LSF18 S460E-1R 46000 9 16 0.51 0.68 0.7 1.5 291 11.4 24 15.0 31.5 10 3/8 1/4 8423 1224 12 LSF18 S460-1a 46000 9 16 0.51 0.68 0.5 1.1 193 11.4 24 15.0 31.5 10 3/8 1/4 8423 1224 04 LSF18 S460E-1a 46000 9 16 0.51 0.68 0.7 1.5 291 11.4 24 15.0 31.5 10 3/8 1/4 8423 1224 09 LSF18 S300 30000 12 20 0.50 0.67 0.5 1.1 193 11.3 23.7 6.6 13.8 10 3/8 1/4 8423 1224 03 8423 1224 06LSF18 S300/R 30000 12 20 0.50 0.67 0.5 1.1 193 11.3 23.7 6.6 13.8 10 3/8 1/4 8423 1224 11 LSF18 S300E-1 30000 12 20 0.50 0.67 0.7 1.5 291 11.3 23.7 6.6 13.8 10 3/8 1/4 8423 1224 08 LSF18 S300E-1/R 30000 12 20 0.50 0.67 0.7 1.5 291 11.3 23.7 6.6 13.8 10 3/8 1/4 8423 1224 10 LSF18 S200 20000 12 20 0.50 0.54 0.5 1.1 193 9.6 20.1 3.5 7.4 10 3/8 1/4 8423 1224 02 8423 1224 05LSF18 S200E-1 20000 12 20 0.50 0.54 0.7 1.5 291 9.6 20.1 3.5 7.4 10 3/8 1/4 8423 1224 07 LSF28 S250a 25000 12 32 0.86 1.15 0.75 1.65 210 18.5 39.2 11.0 23.3 10 3/8 3/8 8423 1235 11 LSF28 S250Ea 25000 12 32 0.86 1.15 1.25 2.75 335 18.5 39.2 11.0 23.3 10 3/8 3/8 8423 1235 60 LSF28 S250E-Ra 25000 12 32 0.86 1.15 1.25 2.75 335 18.5 39.2 11.0 23.3 10 3/8 3/8 8423 1235 49 LSF28 S250-Ra 25000 12 32 0.86 1.15 0.75 1.65 210 18.5 39.2 11.0 23.3 10 3/8 3/8 8423 1235 48 LSF28 S180a 18000 16 40 0.82 1.10 0.75 1.65 210 17.4 36.9 11.0 23.3 10 3/8 3/8 8423 1235 04 LSF28 S180Ea 18000 16 40 0.82 1.10 1.25 2.75 335 17.4 36.9 7.0 14.8 10 3/8 3/8 8423 1235 05 LSF28 S180E-1Ra 18000 16 40 0.82 1.10 1.25 2.75 335 17.4 36.9 7.0 14.8 10 3/8 3/8 8423 1235 42 LSF28 S180-1Ra 18000 16 40 0.82 1.10 0.75 1.65 210 17.4 36.9 7.0 14.8 10 3/8 3/8 8423 1235 41 LSF28 S150a 15000 16 40 0.70 0.94 0.75 1.65 210 15.0 31.8 5.5 11.7 10 3/8 3/8 8423 1235 64 LSF28 S150Ea 15000 16 40 0.70 0.94 1.25 2.75 335 15.0 31.8 4.3 9.1 10 3/8 3/8 8423 1235 61 LSF28 S120a 12000 16 40 0.66 0.89 0.75 1.65 210 13.8 29.3 4.0 8.5 10 3/8 3/8 8423 1235 67 LSF38 S250E-01a 25000 16 40 1.35 1.8 1.5 3.3 352 28 58 25 53 13 1/2 3/8 8423 1231 17 LSF38 S180E-01 18000 16 40 1.35 1.8 1.5 3.3 352 28 58 15 31 13 1/2 3/8 8423 1231 16 LSF38 S180E-01/R 18000 16 40 1.35 1.8 1.5 3.3 356 28 58 15 31 13 1/2 3/8 8423 1231 15 LSF38 S150E-01/R 15000 16 40 1.25 1.7 1.5 3.3 356 24 50 13 27 13 1/2 3/8 8423 1231 14 Angle grinders LSV18 S200-1 20000 12 20 0.46 0.61 0.6 1.3 185 11 23 7 14.7 10 3/8 1/4 8423 0111 11 LSV18 S120-1 12000 12 20 0.46 0.61 0.6 1.3 185 11 23 7 14.7 10 3/8 1/4 8423 0111 13 LSV18 S080-1 8000 12 20 0.37 0.5 0.6 1.3 185 11 23 6.5 13.6 10 3/8 1/4 8423 0111 16 LSV28 S150 15000 16 40 0.68 0.91 1.15 2.53 250 17.0 36.0 8.3 17.6 10 3/8 3/8 8423 0125 54 Grinders for polishing LSF28 ST030 3000 – – 0.67 0.90 1.16 2.55 275 18.0 38.2 8.6 18.2 10 3/8 3/8 8423 1235 63 LSF28 ST030E 3000 – – 0.67 0.90 1.76 3.87 400 18.0 38.2 8.6 18.2 10 3/8 3/8 8423 1235 62 LSF28 ST070a 7000 – – 0.76 1.02 1.16 2.55 275 18.9 40.1 12.4 26.3 10 3/8 3/8 8423 1235 66 LSF28 ST070Ea 7000 – – 0.76 1.02 1.76 3.87 400 18.9 40.1 12.4 26.3 10 3/8 3/8 8423 1235 65 High speed pen model LSF07 S850 88000 4 6 0.10 0.13 0.4 0.9 170 2.2 4.9 2.3 4.6 4.5 3/16 – 8423 1222 03

Die Grinders LSV/LSF

� LSF07 is a high speed model for pre-cise grinding and polishing. LSF 07 is equipped with a 3 mm collet and can be equipped with a 1/8” collet as op-tional. (Without speed governor)

� LSF18 series – All the models in the 18 series are equipped with a power-ful 0.5 kW air motor and speed gov-ernor. The angled models (LSV) have a patented solution that overcomes temperature and leakage problems commonly associated with angle head tools. The result is a leak-free and self-cooled angle head. All models are lubrication free except for the high speed model LSF18 S460.

� LSF28 series – Powerful 0.85 kW air motor, with speed governor and scat-ter damping. Impressive power-to-weight ratio.

� LSF38 – One of the most powerful one hand die grinder on the market, up to 1.35 kW. If you are looking for a tool that can boost your productivity and save you money, the LSF38 is the right tool! The die grinders in the 38 series are lubrication free with scatter damping for maximum operator com-fort and safety.

a Not lubrication-free. -1 = 6 mm collet E = Extended version R = Model is rigid, without scatter damping

198-208.indd 200 2010-02-23 13:37:20

Grinders 201

Grin

ders

LSV/LSF Accessories

Accessories Included

Service Kits07 series 4081 0243 9018 series 4081 0355 9028 series 4081 0315 9038 series 4081 0308 90

Optional Accessories

LSF38Air hose nippleCollet 6 mm (1. se ill.)

LSF/LSV/18/28SpannerCollet 6 mm (1. se ill.)Air hose, air hose nipple and clampExhaust hose

LSF07Air hoseErgoNIP 08Collet 3 mm (1. se ill.)

LSF07 LSF/LSV18 LSF/LSV28 LSF38 See illustration

Optional colletsCollet 1/8" 4150 1822 00 - - - 3Collet 3 mm - 4150 0081 00 4150 0081 00 - 3Collet 6 mm - 4150 0075 00 4150 0075 00 - 3Collet 8 mm - 4150 0074 00 4150 0074 00 - 3Collet 1/4" - 4150 0076 00 4150 0076 00 4150 1754 00 3Collet 10 mm - - - 4150 0681 00 3Collet nut - 4150 0760 00 4150 0760 00 4150 0849 00 3Extension 75 mm /3 in - 4150 0674 00a 4150 0674 00a - 4

For machining of plastic and glas fi breDiamond burr Ø 6 mm - 3780 5013 70 - - 2Diamond burr Ø 8 mm - - 3780 5014 20 - 2Diamond drum Ø 27 mm - 3780 5033 00 - - 5Diamond drum Ø 50 mm - - 3780 5035 00 - 5Spot suction kit for burr (burr not included) - 3780 3015 22 3780 4007 41 - 6Spot suction kit for drum(drum not included) - 3780 4011 61b 3780 4011 71c - 6

a Only for rigid (-R) modelsb For use with 6 mm colletc For use with 8 mm collet

198-208.indd 201 2010-02-25 13:04:53