Download - Rebreather Oxygen Booster
Advantages
• Small dimensions & low weight
• Easy to operate
• CE approved
• Low noise level, 79 dB(A)
• Global service available
Rebreather Oxygen Booster Set
MB ROB22
Configuration
• MAXIMATOR ROB22 booster
• Air drive inflator nipple
• In- & outlet hoses
• Pressure gauges 0-400 bar, Ø63
• In- & outlet block with bleed-off valve
• Connectors
Options
• Handlever attachment
• Transport case with foam
• Other connectors
Net. Weight: 10.0 kg
Outlet: DIN G5/8”
Inlet: RI2 Bullnose
Air drive: Inflator nipple
Connections
MAXIMATOR® Benelux BV
Industrieweg 64
2712 LB Zoetermeer
The Netherlands
www.maximator.nl
1 of 3
Technical Datasheet
Displacement volume / double stroke: 4,6 cm³ (0.28 cu.inch)
Pressure ratio: 1 : 28
Outlet pressure: 280 bar (calculated at 10 bar air drive)
Inlet pressure: 50 – 280 bar (725 - 4060 psi)
Air drive pressure: 1-10 bar (14,5 – 145 psi)
Technical Data
Maximum operating temperature: 60°C
MAXIMATOR® Benelux BV
Industrieweg 64
2712 LB Zoetermeer
The Netherlands
www.maximator.nl
2 of 3
Dimensional drawing
ROB Booster
Inlet Hose
Outlet Hose
MAXIMATOR® Benelux BV
Industrieweg 64
2712 LB Zoetermeer
The Netherlands
www.maximator.nl
Distributor:
The Rebreathersite
Haagwindelaan 20
NL-1474 RB Oosthuizen
Tel. 06 532 221 27
E-mail [email protected]
Internet www.THEREBREATHERSITE.nl
3 of 3
NOTE: Product availability and design or specifications of this product are reserved to change at any time without notice. DS 01.01 | Rev.00
Performance curve
ALSO AVAILABLE
This Rebreather Oxygen Booster Set is also available with the new ROB32D booster, which have a much more outlet flow ca-
pacity. Please consult your distributor for more information.
Technical data
Average flow 280 NL/min *
Inlet pressure 50 to 300 bar
Pressure ratio 1 : 32
Volume per stroke 11,6 cm³
* flow is depending of air drive and inlet pressure
