Download - Radio Works R.F. Consulting Presents Grounding and Bonding A 3 Dimensional Aproach 561-969-9245
Radio Works R.F. ConsultingPresents
Grounding and BondingA 3 Dimensional Aproach
www.RadioWorksRFConsulting.com 561-969-9245
Copyright 2009, All Rights Reserved
• Opening• Conventions• Conversely• Grounding Is A Religion• Grounding Is A Lot Of Subjects Under One Header• Avoid The Strike• Minimize The Strike• Control The Damage• Downward Dissipation• The Design• The Theory• AC Mains• Strike Potential• Grounding Entities: Tower, Cable Portal, Mains, Shelter• Implementation• Inspection• Maintenance• Conclusion
Chapter Topics:
Introducing New Concepts
• 3 Dimensional Electrical Schematics• The Entity Concept
• Impedance VS. Resistance• Throwing Charges
• The Reality of Grounds ( Yours and Theirs ) • Dispelling Myths
OPENING:
• Change is not necessary or relevant for all things.
• Change is the evolution of an idea that has been developed and has reached a point where some form of need, requirement, growth or progress mandates that new ideas be considered. It is this consideration that promotes change.
Inside The Tower WorksMangonia Park, Florida
Convention:
• We have done “it” this way for decades, made few significant changes, killed low numbers of people, and have had “some” success with the way we do “it”, Why change now? This obviously applies to every thing in every day life.
This Is How It’s Done
Conversely:
• We have seen many changes in the global grounding scenario as evidenced by the multitude of educational grounding primer documents and de-facto standards that claim there is enough data, if not history, to recommend changes in this time honored methodology. ( A supposition ) Practices are also held tightly to the convention of the writer of a particular document.
Grounding Is A Religion:
• Though a provocative statement, this is a stereotypically accurate statement.
• “It” can be allowed that no singular methodology is wholly correct
• Conventional thought also has to be understood that every situation is different
• Corporate methodologies protect themselves at our expense and are driven by liability and the ramifications of exposure and indemnification
Techniques To Swear By ( Or Not )
Grounding Is A Lot Of Subjects Under One Header:• Grounding as a descriptive activity, regardless of
the method, and the assumption that the purveyor has no axe to grind, and selflessly promotes the intention to protect equipment and personnel from damage due to lightning strike, or other electrical fault
• Avoid the “Strike”. • Minimize the strike • Control the strike and any potential for damage
Downward Dissipation:• The key word is Downward, the un-tamed strike
energy radiates both downward and outward (spherically) from a surface point strike or energization
• Over zealous bonding of every metallic thing to every other metallic thing causes damage in the worst way. It is impossible to sufficiently bond objects together so as to eliminate the action of circulating currents during a strike event. It is these circulating currents that cause the primary damage.
Dissipative Directivity
The Design:
• As each site is different, so each site is the same• A properly designed dissipative array is purposed
to direct the strike energy developed from the tower “Downward” in to the earth, and away from the shelter horizontally and vertically
• Proper design of the grounding applications of the various electrical and radio related conductors descending from the tower also assist the strike in a controlled way on the downward and directedely outward path
Three Dimensional Electrical Schematics and Design Criteria
• Grounding is NOT and NEVER WAS a two dimensional problem
• Let’s face it, It is not 1930 any more• Grounding, Bonding, Circulating Current Flow,
Charge Dissipation, and Strike Avoidance ARE a THREE DIMENSIONAL consideration.
• Everyone who believes that it is good to turn your Racks and Transmitters in to large fuses
Raise your hands
Three Dimensional Electrical Schematics
Three Dimensional Electrical Schematics:
The Theory:
• Remove the circulating current paths and everything in the room stands up with a potential rise and once dissipated milliseconds later, it all sits back down un-touched
• Without circulating paths, there is no current flow
• With no I/R losses there is no voltage drop • With no voltage drop, there is no dissipation of
current• With no dissipation, there is no heating, arcing or
burning
Arcing From Circulating Currents
Methods You Can Count On
Resistance VS. Impedance
• Virtually anyone with an ounce of sense can drive a ground system with less than 5 Ohms
• Poorly located and interconnected low resistance paths can cause more trouble than they cure
• Use of Low and High Impedance paths assist in the segregation of surge/strike energy in concert with the proper placement of low Resistance ground arrays
AC Mains:
• Regardless of the spike source, limiting of the spike voltage is essential to minimizing the damage to the equipment in the shelter
• The two basic types of Mains surge arresting are series inserted devices and parallel devices
• Series devices are more effective than parallel devices
Strike Potential:
• Entry of the strike energy into the shelter must be avoided
• The AC Mains protective system can assist with this imparted energy but only if it is impressed on to the Mains conductors
• Entry of strike energy in to a shelter system through the grounding system and devices in mechanical contact with the floor that causes another significant source of damage is called the Reverse Burst
Grounding Entities:
• The Tower • The Cable Portal• The AC Mains• The Shelter• Enter the Single Point or Star ground. In a
physical plant the size of any transmitter facility, whether simple cellular or broadcast, the idea of a true single point is almost not possible. The modification of design called…
• The Distributed Single Point System
The Distributed Single Point Gound
Implementation:
• Develop a comprehensive plan for all Entities as they ground themselves, and relate to each other
• Develop interconnectivity utilizing high and low resistance in concert with high and low inductance
• Develop a testing standard that is repeatable• Perform maintenance testing
Throwing Strike Energy
• Proper system design segregates strike energy to control its effects
• Strike energy impressed on to an Entity within the system is dissipated by that system and is not shared outside that system
• Proper design of the dissipative array will “Throw” the charge directionally in vertical and horizontal dimensions
The Layout
Inspection:
• It is important to be able to inspect, log and repeat testing of the effectiveness of the design
• Use the proper testing apparatus• Repair any defect immediately• A damaged grounding system is a dangerous
defect and must be regarded as such
Primary Testing Devices
High Current/High NoiseClamp On Single Ended3 Point Of Fall
Maintenance:
• In this care and feeding we see that it is possible for even the best design to fail at some point either through the application of overwhelming energy or in the performance of it’s duty
• It is often noted that simple decay will deteriorate any grounding system
• Electrical and visual inspection regimens will surface any deficiencies before they become issues during the next strike event
Example of XL Spread SheetFrom Post installation Testing
LOCATION RESISTANCE CURRENT IN mA GROUP RESISTANCE GROUP CURRENT IN mA
BASE LINE READINGS 4/18/08 Mar-08DISH ROD 1 3.00 2DISH ROD 2 2.8 1DISH ROD 3 3.5 1DISH ROD 4 3.6 1DISH ROD 5 2.6 1DISH ROD 6 2.7 2GROUPING NOTES
TOWER ROD 7 2.5 0TOWER ROD 8 2.2 0TOWER ROD 9 2.5 0TOWER ROD 10 2.2 0TOWER ROD 11 2.3 0TOWER ROD 12 2.7 1 0.9 10GROUPING NOTES
TOWER ROD 13 2.5 1TOWER ROD 14 2.4 1TOWER ROD 15 2.6 1TOWER ROD 16 2.2 1TOWER ROD 17 2.4 1TOWER ROD 18 2.2 1 0.9 10GROUPING NOTES
TOWER ROD 19 2.4 1TOWER ROD 20 2.5 1TOWER ROD 21 2.1 0TOWER ROD 22 2.6 0TOWER ROD 23 2.5 1TOWER ROD 24 2.7 1 0.9 10GROUPING NOTES
COAX ENTRY ROD 25 2.5 2COAX ENTRY ROD 26 2.5 1COAX ENTRY ROD 27 2.6 1COAX ENTRY ROD 28 2.7 0GROUPING NOTES
HTC SERVICE ENTRY ROD 29 2.4 3HTC SERVICE ENTRY ROD 30 2.5 2HTC SERVICE ENTRY ROD 31 2.4 2HTC SERVICE ENTRY ROD 32 2.5 2GROUPING NOTES
HTT SERVICE ENTRY ROD 33 2.5 2HTT SERVICE ENTRY ROD 34 2.6 2HTT SERVICE ENTRY ROD 35 2.7 2HTT SERVICE ENTRY ROD 36 3 2GROUPING NOTES
RACK GROUND ROD 37 2.4 1RACK GROUND ROD 38 2.4 1RACK GROUND ROD 39 2.3 2 1 0.7GROUP NOTES
Conclusion:
• It is not as important what you tend to believe or what is fact or fiction. The proof of the matter is that certain techniques work and others are simply ineffective or downright dangerous to materiel or personnel
• Simply because we as a group have done “it” a certain way for ever, is not a good reason to continue to do this or any type of thing
• Bold steps need to be taken to create a more unified and appropriate convention that allows the designers and users the assuredness that a system was specifically and appropriately designed for them and favors none other than them
Thank You For Attending
The complete paper and Power Point may be downloaded from the Web Site on the Downloads tab