Efficient LightingPower Management & Control Solutions
www.infineon.com/lighting
Smart Fluorescent Ballast Controllers 4
DC/DC LED Driver 7
AC/DC Offline LED Driver 12
N-Channel MOSFETs 16
Microcontrollers 18
Automotive Lighting Solutions 20
LED Driver Online Design Tool 21
Support Tools 22
Contents
2
Global concerns regarding climate change demand that we use our limited energy resources more efficiently. Approximately 20% of the global electrical energy is consumed by lighting applications. The trend toward energy-efficient lighting is apparent and requires both efficient light-source technologies and electronic components. Infineon as global number-one-ranking power semiconductor market leader for the last 9 consecutive years, offers an innovative product portfolio for general lighting applications, supporting benchmark efficiency improvements, system miniaturization, reliability and overall cost savings.
Infineon delivers innovative, high-performance solutions with best-in-class technologies that can be used in a broad range of applications.
�� Fully integrated ballast controllers for fluorescent lamps�� Highly efficient offline LED driver ICs for lamp retrofits and low-power LED converters�� DC/DC switched mode and linear LED drivers for single string LED applications�� High performance power management ICs and microcontrollers for intelligent lighting systems�� Extensive portfolio of leading edge CoolMOS™ and OptiMOS™ Power MOSFETs
Lighting applications vs. power range & topology
High Intensity Discharge (HID)Full-Bridge/Half-BridgeOutdoor & Commercial Lighting
Linear/Compact Fluorescent (LFL, CFL)Resonant Half-BridgeCommercial, Residential & Outdoor Lighting
LED High PowerDCM PFC + LLC Half-Bridge + DC/DCCommercial & Outdoor Lighting
LED Mid PowerPVC1) single/dual stage(PFC/Flyback, PFC+Flyback)DC/BuckLinearCommercial Lighting (e.g. ECGs)
LED Low PowerPCC2) single/dual stage(PFC/Flyback, PFC/Floating Buck)DC/BuckResidential & Commercial Lighting(e.g. Retrofit Lamps, Downlights, Spotlights)
Power Range [W]1) Primary Side Voltage Control2) Primary Side Current Control
Appl
icat
ions
& T
opol
ogie
s
Due to our highest level of quality, service and technology, Infineon is an OSRAM “LED Light for you” certified partner and supports customers with outstanding and forward-looking solutions for Solid State Lighting (SSL).
3
Smart ballast control ICs by Infineon integrate all functions required to operate FL lamps such as preheat-, ignition- and run-mode and protection features. Digital mixed-signal power control is employed enabling speedy, cost-effective and stable ballast designs with a minimum number of external components.Reliable and robust high voltage isolation is achieved using Infineon’s proprietary CoreLess Transformer technology (CLT).
Product Highlights�� Integrated high performance critical conduction mode PFC stage�� Improved Total Harmonic Distortion (THD) and harmonic distortion for low power applications in DCM mode�� Built-in protection functions such as Over-Voltage Protection (OVP) and Over-Current Protection (OCP) �� Adjustable end-of-life detection in multi-lamp topologies and detection of capacitive mode operation�� Intelligent digital-/mixed-signal lamp inverter control�� Integrated high-voltage level-shift half-bridge driver using coreless transformer technology
Infineon smart ballast fluorescent controllers have the control for all operating phases integrated
Smart Fluorescent Ballast Controllers
Smart Fluorescent Ballast Controllers
135kHz
f, V
65kHz
50kHz
40kHz
Start-up10ms
Softstart40–237ms
Ignition0–2500msPreheating
Frequency
Lamp Voltage
625msPre-Run
NormalOperation Run
t
4
Key Features�� Able to handle lamp chokes with high saturation behavior�� Special in-circuit test mode for faster test time�� Parameters set with resistors only�� Excellent dynamic PFC performance enables very low THD across wide load ranges�� Separate adjustable levels of lamp overload and rectifier effect detection (EOL1, EOL2)�� Intelligent discrimination between surge and half-bridge overcurrent events �� Self-adapting dead time adjustment of the half-bridge driver�� Highly accurate timing and frequency control over wide temperature range (-25 to 125 °C)
Benefits�� Optimized lamp choke size, reduced BOM costs�� Halving the time for key tests such as end-of-life detection and preheat/operation modes�� Reduced system cost and improved ballast stability�� Suitable for dimming & multi-power ballasts�� Enables ballast compatibility with a wider range of lamp types�� Lamp can automatically restart following surge events and handle correctly EOL events�� Eases design of multi-power ballasts and reduces EMI�� Reliable, stable ballast designs
* EOL including lamp overload and rectifier effect detection
Product type Package PFC Topology Half-Bridge Driver
adj. run Frequency
Lamp connection Dimmable Protection
ICB2FL01G DSO-19 (300mil) CrCM Half-Bridge ± 900V max. 120kHz serial, parallel (type 1-4) yes Surge, Capacitive Mode, EOL*, PFC under and overvoltage, PFC and HB overcurrent
ICB2FL02G DSO-19 (300mil) CrCM Half-Bridge ± 900V max. 140kHz serial, parallel (type 1-4) optimized
ICB2FL03G DSO-16 (150mil) CrCM Half-Bridge ± 650V max. 120kHz serial (type 1-2) yes
Product Type List
Smart Fluorescent Ballast Controllers
5
Description�� 54W T5 single lamp design with voltage mode preheating�� Active PFC in Critical/Discontinuous Conduction Mode (CritCM/DCM) and a half-bridge topology for lamp inverter�� Components used:�— ICB2FL03G smart lamp ballast controller in DSO-16 package�— MOSFET switches 3x IPD60R1K4C6 in TO252 for PFC and half-bridge
�� Efficiency > 93% with lamp after 30min operation in run mode @ 230VACRMS
�� PF > 0.99 @ 230VACRMS �� THD < 4% @ 230VACRMS
�� Proprietary ignition control allows for operation close to magnetic saturation of inductors�� Implementation of numerous monitoring and protection features for highest reliability (surge, inverter/PFC-overcurrent, bus over-/undervoltage, EOL1 overload, EOL2 rectifier effect, emergency detection according to VDE0108)�� Supports customer in-circuit test mode for reduced tester time�� Assembly option on PCB for dimming functionality
Application Example for ICB2FL03GDemoboard for 54W T5 Single Lamp Design with Voltage Mode Preheating
Related Application Note
Info number Description
AN ICB2FL03G ICB2FL03G smart ballast control IC for fluorescent lamp ballasts
Related Evaluation Board
Board name Product Description Order number
Evaluation board ICB2FL03G
ICB2FL03G CoolMOS™ MOSFET
Demoboard for 54W T5 single fluorescent lamp design with voltage mode preheating using ICB2FL03G
Eval ICB2FL03G
Smart Fluorescent Ballast Controllers
www.infineon.com/smartlighting
PFCZCD
GN
D
RFRU
N
RFPH
RTPH
RES
V CC
LVS
HSGD
HSVCC
HSGND
LSGD
LSCS
PFCGD
ICB
2FLO
3G
PFCVS
90 ...270V AC
PFCCS
6
DC/DC LED Driver
The DC/DC LED drivers consist of two main product families: The BCR series is the smallest size and lowest cost product family for linear LED drivers. The ILD series are switch-mode LED drivers with highest efficiency.
Both families come with a line-up of regulators with integrated power stage and with a line-up of controllers that allow utmost scalability by flexible dimensioning of the output stage.
The BCR linear LED drivers are perfectly suited for driving LED currents from 10mA to 250mA, making it the ideal choice for low to mid power LEDs in general lighting applications.
This represents the lowest cost solution that requires ultra-low external part count and PCB space. The light output can be adjusted by an external resistor. PWM dimming is supported either by a microcontroller interface or by means of an external digital transistor.
Thanks to its negative thermal coefficient the LED load will be protected from being overdriven.
DC/DC LED Driver
Family Overview of DC/DC LED Drivers for General Lighting Applications
www.infineon.com/lowcostleddriver
0.02
ILD1151 + Switch **
ILD1150 + Switch *
Buck/boost
Buck
Linear
ILD4001 + Switch
ILD6070
ILD6150
ILD4120
ILD4071
ILD4035
ILD2035
BCR450 + Switch
BCR320/321U
BCR205W + Switch
BCR402W
BCR401W
BCR405U
BCR402U
BCR401U
BCR420/421U0.15
0.35
0.70
+1.
5
I OU
T max
. [A]
SELV
Isol
atio
n
VOUT max. [V]
120 24 36 48 60
* max. 45V in Boost and SEPIC configuration** max. 60V in Boost and SEPIC configuration
7
The ILD switch-mode LED drivers, on the other hand, support currents from 150mA to 3A, making them the ideal choice for high- and ultra-high power LEDs in general lighting applications.
The voltage management is very flexible for the selection of the topology: buck, buck/boost, boost and SEPIC configuration are supported.
Efficiency can be as high as 98% across a wide range of operation conditions. For the vast majority of buck LED drivers the user has the choice of dimming concepts: PWM or analog voltage.
Integrated smart thermal protection, over voltage and over current protection contribute to a longer LED lifetime.
Product type
Group Topology VS (min) [V]
VS (max) [V]
Iout (typ) [mA]
Iout (max) [mA]
Dimming Package Ptot (max) [mW]
BCR205W LED Controller Linear 1.8 18 0.5 ext. Switch no SOT343 100
BCR450 LED Controller Linear 8.0 27 70.0 ext. Switch Digital SC74 500
ILD4001 LED Controller Buck 4.5 42 10.0 ext. Switch Analog or digital
SC74 500
ILD1150 LED controller Boost/ Buck Boost/SEPIC
4.75 45 90.0 ext. Switch Digital SSOP-14 –
ILD1151 LED Controller Boost/ Buck Boost/SEPIC
4.5 45 90.0 ext. Switch Analog or digital
SSOP-14 –
ILD2035 LED Drivers for high power LEDs
Buck 8.0 22 350.0 400 no SC74 1,000
ILD4035 LED Drivers for high power LEDs
Buck 4.5 40 350.0 400 Analog or digital
SC74 1,000
ILD4071 LED Drivers for high power LEDs
Buck 5.0 40 100.0 700 Analog or digital
DSO-8 –
ILD4120 LED Drivers for high power LEDs
Buck 4.5 40 1,200.0 1200 Analog or digital
DSO-8 1,500
TLE4309G LED Drivers for high power LEDs
Linear 4.5 24 500.0 500 Digital TO263 –
ILD6070 LED Drivers for high power LEDs
Buck 4.5 60 700.0 700 Analog or digital
DS0-8 –
ILD6150 LED Drivers for high power LEDs
Buck 4.5 60 1,500.0 1,500 Analog or digital
DS0-8 –
BCR320U LED Drivers for mid power LEDs
Linear 1.4 + VfLED 24 + VfLED 250.0 300 no SC74 1,000
BCR321U LED Drivers for mid power LEDs
Linear 1.4 + VfLED 24 + VfLED 250.0 300 Digital SC74 1,000
BCR420U LED Drivers for mid power LEDs
Linear 1.4 + VfLED 40 + VfLED 150.0 200 no SC74 1,000
BCR421U LED Drivers for mid power LEDs
Linear 1.4 + VfLED 40 + VfLED 150.0 200 Digital SC74 1,000
BCR401U LED Drivers for low power LEDs
Linear 1.4 + VfLED 40 10.0 65 Digital SC74 750
BCR401W LED Drivers for low power LEDs
Linear 1.2 + VfLED 18 10.0 60 Digital SOT343 500
BCR402U LED Drivers for low power LEDs
Linear 1.4 + VfLED 40 20.0 65 Digital SC74 750
BCR402W LED Drivers for low power LEDs
Linear 1.4 + VfLED 18 20.0 60 Digital SOT343 500
BCR405U LED Drivers for low power LEDs
Linear 1.4 + VfLED 40 50.0 65 Digital SC74 750
DC/DC LED Driver
8
DC/DC LED Driver
Key Features & Benefits�� Homogenous light output in different LED strings�� Easy to implement with low component count�� No sense resistor required for common currents like 10mA/20mA�� Flexibility to adjust the current by external resistor from 10mA up to 60mA�� Negative thermal coefficient protecting lifetime of LEDs
Application Example for BCR402WChannel Letter with Low Power LEDs
Related Application Note
Description
Comparison of Resistor Biasing versus BCR401W / BCR402W LED Driver Biasing of +12V & +24V DC Low-Current LED Striplights
Infineon Component List
Product type Description
BCR402W Low power LED driver
BAS3010A-03W Schottky Diode for reverse polarity protection (RPP) – 12V board
BAT64-03W Schottky Diode for reverse polarity protection (RPP) – 24V board
Related Evaluation Board
Board name Product Description Order number
12V low current LED demoboard
BCR402WBAS3010A-03W
12V BCR402W demoboard driving 3x 0.2W LEDs in series
BCR402W 12V LED BOARD
24V low current LED demoboard
BCR402WBAT64-03W
24V BCR402W demoboard driving 6x 0.2W LEDs in series
BCR402W 24V LED BOARD
(optional)
LEDsON/OFF
BCR402W
RSense
(optional)
Rext VS
GND Iout
VS = 12V DCBAS3010-03W
(optional)
www.infineon.com/lowcostleddriver 9
Key Features & Benefits�� Homogenous light output in different LED strings�� Easy to implement with low component count�� Flexibility to adjust the current by external resistor from 10mA up to 250mA�� Direct microcontroller interface for PWM dimming for BCR421U and BCR321U�� Negative thermal coefficient protecting lifetime of LEDs�� High power dissipation capability
Application Example for BCR320ULED Strip with Medium Power LEDs
Related Application Note
Info number Description
AN212 Driving Half Watt LEDs on a light strip with BCR320U, BCR321U or BCR420U, BCR421U
Infineon Component List
Product type Description
BCR320U Medium power LED driver
BAS3007A-RPP Schottky bridge for reverse polarity protection (RPP)
Related Evaluation Board
Board name Product Description Order number
24V Half Watt LED demoboard
BCR320UBAS3007A-RPP
24V BCR402W striplight demoboard driving 6x 0.5W LEDs in series
BCR320U HW LED BOARD
DC/DC LED Driver
www.infineon.com/lowcostleddriver
Rext
µC
BAS3007A-RPP(optional)
BCR320U
Rext
GND Iout
Iout
IEN
Iout
VS = 24V DC-+
10
DC/DC LED Driver
Application Example for ILD40017W and 10W MR16 Low Voltage Halogen Replacement Lamps
Key Features & Benefits�� Flexibility to adjust the output current in a wide range due to LED controller with external MOSFET�� Flicker-free operation with electronic transformers�� Thermal protection of LEDs without usage of NTC or PTC�� Low system cost due to usage of N-channel MOSFETs as power stage
Related Application Note
Info number Description
AN-EVAL_E-Transformer_Compatible_MR16
MR16 7W / 10W control board using ILD4001 step down LED controller
Infineon Component List
Product type Description
ILD4001 High power LED controller
BSR302N Small signal MOSFET
Related Evaluation Board
Board name Product Description Order number
MR16 7W board ILD4001BSR302N
Control board for 7W MR16 low voltage halogen replacement lamps
MR16 7W board
MR16 10W board ILD4001BSR302N
Control board for 10W MR16 low voltage halogen replacement lamps
MR16 10W board
www.infineon.com/lowcostleddriver
GNDGND GND
GND
GND GND
optional
optional
BSR302N
LED+
ICI2V AC Input
SchottkyDiode
VSense
GND
Vdrive
VS
GND
EN/PWM
ILD4001LED-
GND
11
Infineon provides a single stage flyback and floating buck solution with PFC functionality.
Innovative primary control techniques combined with accurate PWM generation for phase cut dimming enable solutions with very low component count for smallest form factor.
Dimmable off-line LED driver �� ICL8001G simplifies LED driver implementation�� ICL8002G is optimized for best possible dimming performance
Product Group Type Dimming PFC Topology fRUN [kHz]
RDS(on) [Ω]
VDS (max)
Package
ICL8001G Off-line LED driver
Controller yes (trailing/leading edge)
DCM mode
Quasi-resonant flyback / buck
ZCD – – DSO-8
ICL8002G Off-line LED driver
Controller yes (trailing/leading edge)
DCM mode
Quasi-resonant flyback / buck
ZCD – – DSO-8
LED Offline
AC/DC Offline LED Driver
www.infineon.com/ledoffline12
Application Example for ICL8002GDimmable 13W LED Bulb in Isolated Flyback Topology
Key Features & Benefits�� High dimmer compatibility – flicker-free operation�� Isolated flyback topology VS = 230VAC�� High efficiency of > 85%�� Low system cost due to low component count�� High power factor > 0.9�� Small form factor�� Short time to light
Related Application Note
Info number Description
AN-ICL8002G-LED-Flyback Demoboard
Quasi-resonant flyback converter for phase cut dimming with high power factor
Infineon Component List
Product type Description
ICL8002G Off-line LED controller for dimmable lighting applications
SPD02N80C3 MOSFET, 800V, 2.7Ω, DPAK
Related Evaluation Board
Board name Product Description Order number
230V isolated control board for dimmable LED bulb
ICL8002GSPD02N80C3
Demoboard for dimmable 13W LED bulb in isolated flyback topology
EVALLED-ICL8002G-B1
AC/DC Offline LED Driver
www.infineon.com/ledoffline
VCC
VCC
1J1
-
~
~
+
8
7
6
5
1
2
3
4
GNDGND
GND
GND
GND
GND
GND
SEC GND
SEC GND
InductorJP1JUMP JP2
JUMP
HV
EF20 Core
GND ZC
GND
PassiveDamper
PassiveBleeder
ActiveDamper
1J2
1
1
J4
J3
GND GNDZC
U1
HV
VCC VCC
N.C.
HV
ZCV
VR
CS
GD
ICL8002G
SPD02N80C3
13
Key Features & Benefits�� High dimmer compatibility – flicker-free operation�� Non-isolated topology VS = 120VAC�� High efficiency > 85%�� Very low system cost�� Very high power factor > 0.95�� Small form factor
Application Example for ICL8002GDimmable 12W LED Bulb in Non-Isolated Buck Topology
Infineon Component List
Product type Description
ICL8002G Off-line LED controller for dimmable lighting applications
IPD60R2K0C6 MOSFET, 600V, 2Ω, DPAK
BSS225 MOSFET, 600V, 45Ω, SOT89
Related Application Note
Info number Description
AN-ICL8002G-LED-Buck Demoboard
Non-isolated buck converter for phase cut dimming with high power factor
Related Evaluation Board
Board name Product Description Order number
120V non-isolated control board for dimmable LED bulbs
ICL8002GIPD60R2K0C6
Demoboard for dimmable 12W LED bulb in non-isolated buck topology
EVALLED-ICL8002G-B2
AC/DC Offline LED Driver
www.infineon.com/ledoffline
Active Bleeder
4
3
2
1
5
U1
EE13
(SP_
NEW
)
BSS225
6
7
8
DRV
CS
VR
ZCV
HV
N.C.
VCC
GND
ICL8002G
L
90~132V AC
N
LED-
35V/300mA
LED+
PassiveDamper
PassiveBleeder
-
+
IPD60R2K0C6
14
AC/DC Offline LED Driver
Application Example for ICL8002G120V High Efficiency Dimmable 24W PAR38 LED Lamp
Key Features & Benefits�� High dimmer compatibility – flicker-free operation�� Isolated flyback topology, VS = 120VAC�� Very high efficiency > 90%�� Very high power factor > 0.95
Related Application Note
Info number Description
AN-ICL-8002-G-120VHigh efficiency flyback LED demoboard
120V high efficiency flyback converter for dimmable PAR38 with high power factor
Infineon Component List
Product type Description
ICL8002G Off-line LED controller for dimmable lighting applications
IPI60R190C6 MOSFET 600V, 190mΩ
IPD60R600C6 MOSFET, 600V, 600mΩ, DPAK
BSS225 MOSFET, 600V, 45Ω, SOT89
Related Evaluation Board
Board name Product Description Order number
120V isolated dimmable LED PAR38 board
ICL8002G IPI60R190C6 IPD60R600C6 BSS225
Demoboard for dimmable 24W LED PAR38 in isolated flyback topology
EVALLED-ICL8002G-B3
www.infineon.com/ledoffline
ActiveBleeder Circuit
High EfficiencyActivate Damper Circuit
Regulated VCC
Supply Circuit
L
108–132V AC
N
8
Q77
6
5
1
2
3
4
GND
VCC
N.C.
HV
ZCV
VR
CS
GD
ICL8002G
IPI60R190C6 IPD60R600C6
BSS225
15
The revolutionary CoolMOS™ power family sets new standards in the field of energy efficiency. As technology leader in high voltage MOSFETs, CoolMOS™ offers a significant reduction of conduction- and switching losses and enables high power density and efficiency for superior power conversion systems. Particularly the latest, state-of-the art generation of high voltage power MOSFETs have made ballasts, off-line LED drivers and AC/DC power supplies more efficient, more compact, lighter and cooler than ever before. This success was achieved by offering the lowest on-state resistance per package outline, the fastest switching speed and the lowest gate driver requirements of high voltage MOSFETs commercially available.
On state: Reduction of resistance of epitaxial layer by high doped n-columns�� Higher doping level in n-type drift region results in lower RDS(on)
Blocking State: Compensation of additional charge by adjacent p-columns�� Half of active chip area is covered by p-columns�� During blocking state the p-column compensates the charge of the adjacent n-column resulting in high breakdown voltage at an area specific on-resistance below the silicon limit
CoolMOS™ – N-Channel MOSFETs
CoolMOS™ Technology
CoolMOS™
GateSource
nepi
p+n+
Standard MOSFET
Drain n+
p
GateSource
nepi
p+n+
N-Channel MOSFETs
16
Infineon offers a comprehensive product portfolio for lighting applications. The selection table below shows an overview of the most suitable voltage and RDS(on) classes for different applications and topologies.
CoolMOS™ Selection Table
www.infineon.com/coolmos
N-Channel MOSFETs
CoolMOS™
C6/E6C3CP
0.045Ω...0.6Ω
0.07Ω...6Ω
0.041Ω...3.3Ω
CP
HIDHID
C3*CE
500V 650V600V
0.19Ω...3Ω
0.07Ω...3Ω
0.14Ω...0.52Ω
C3*C6/E6CFD2
0.041Ω...1.4Ω
0.037Ω...0.6Ω
0.07Ω...0.6Ω
C3
0.085Ω...2.7Ω
C3
LEDLow Power
LEDLow Power
LEDLow Power
LEDLow Power
LEDLow Power
800V 900V
0.12Ω...1.2Ω
0.08Ω...0.72Ω
CFD
FLFLPFC/Resonant Half-Bridge
PFC/Resonant Full-Bridge
Single Stage PFC/Flyback
Single Stage PFC/non-isolated Buck
LEDMid Power
LEDMid Power
LEDMid Power
PFC/QR Flyback
LEDHigh Power
LEDHigh Power
LEDHigh Power
LEDHigh Power
PFC/LLC Half-Bridge
HIDHID
Voltage Range
Product Family & RDS(on) Range (* not for new designs)
Application & Topologies
17
XC82x / XC83x MicrocontrollersLow Pin-Count Microcontrollers for Industrial and Automotive Applications
Microcontrollers
Key Features�� 16bit 4 channel PWM clocked at 64MHz�� 10bit ADC with < 1µs conversion time�� 2–8KB ECC Flash with read-out protection�� Specific peripherals for capacitive touch control and LED displays�� UART, SPI, I2C�� Supports DALI implementation�� TSSOP-16 and -28�� Up to 150°C and AECQ100
Based on popular 8051 architecture Infineon offers low pin-count XC82x and XC83x microcontrollers with smart and autonomous peripherals offloading CPU. With advanced timers, excellent mixed signal and application specific peripherals for touch control and LED displays, XC82x and XC83x fit to a broad range of industrial and consumer applications.All microcontrollers can generate flexibly programmable PWM for 4 output channels which are used for dimming of LED strings. With the 10bit ADC system supervision e.g. overcurrent protection can be enabled efficiently.Furthermore, using UART the XC82x and XC83x products can serve as DALIcontrollers for lighting control gears.Products are available up to 150°C conforming with the automotive quality standard of AEC Q100.
www.infineon.com/xc80018
Microcontrollers
The Digital Addressable Lighting Interface (DALI) is a protocol enabling the design of lighting communication networks. For detailed information on DALI see www.dali-ag.org.
With the XC82x and XC83x microcontrollers Infineon offers low-pin-count microcontrollers to design DALI-conforming control gears. Evaluation can be done using the XC82x or XC83x Easy Kits which can be connected to a DALI network with the DALY PHY adapter boards. LightNET is a SW tool to configure the DALI evaluation network from the PC. For detailed instructions see related application notes.
Application Example for DALIDALI Evaluation Network with SW and HW Components by Infineon
www.infineon.com/dali
Related Application Notes
Description Internet link
Guide to using DALI LightNet tool Demoboard for 54W T5 single lamp design with voltage mode preheating
www.infineon.com/lighting
DALI Control Gear Software Stack Dimming demoboard 26W TC-TEL single lamp design
www.infineon.com/dali
DALI Control Device using XC836 Demoboard for 54W T5 single lamp design with voltage mode preheating
www.infineon.com/dali
DALI Demo using Touch Sense Control www.infineon.com/dali
Related Evaluation Boards
Board name Order number
XC82x Easy Kit KIT_XC822_EK_V1
XC83x Easy Kit KIT_XC836_EK_V1
DALI PHY adapter KIT_XC822_XC836_DALI
Easy Kit asDALI Master Board
XC83xDALI Slave Board
LightNETDALI configuration SWfor groups and scenes
DALI BusXC83xSW Stack
DALIPHY
USB/UARTPC Connector
XC83xSW Stack
PowerSupply
DALIPHY
XC83xDALI Slave Board
XC83xSW Stack
DALIPHY
19
Driving Innovations for Automotive LightingInfineon offers a full lineup of best-in-class semiconductor solutions targeted at automotive lighting and smart body control applications. Across the entire interior and exterior spectrum, these products set new standards for innovation, performance, energy efficiency and cost effectiveness.
From protected single and multi-channel power switches for bulbs and LEDs through protected linear LED drivers with diagnostic functionality to switched DC/DC buck and boost high-current LED drivers and front-light LEDs, you’ll find exactly what you need to keep your design on the road to success.
Highlights�� New discrete PROFET™+ family with 100 % package compatibility in the 0.5-11A load current range to accommodate different loads (bulbs and LEDs) in one design.�� Integrated multichannel SPI POwer Controller (SPOC) family to reduce PCB footprint and microcontroller load in compute-intensive body control modules.�� Automotive LED drivers for optimized LED front, rear and ambient lighting in decentralized add-on modules.
Automotive Lighting Solutions
www.infineon.com/automotive-lighting
PROFET™+SPOC
Infineon®
Auto LED
Body Control Module
PROFET™+SPOC
Body Control Module Load
Light Module
20
The online LED Driver Design Tool enables users to quickly design and simulate LED driver circuitries used in all kinds of LED applications such as retrofit lamps, ballasts, spotlights, downlights, channel letters with power requirements <25W.
The proposed driver design can be further customized with the implemented redesign option where external components can be modified.
The following topologies are supported:�� Quasi-resonant PFC/Flyback for phase-cut dimming�� Fixed-frequency PFC/Flyback for non-dimming�� DC/DC buck �� Linear
LED Driver Online Design Tool
The steps to a successful LED Driver Design
1. Selection of the application/topology
4. Review schematics and redesign (optional)5. Simulation: AC input transient, start-up analysis
2. Specification of design parameter3. Selection of suitable LED driver
6. Download Design Summary
�� Design specification
�� Schematics
�� Transformer design details
�� Bill of Materials
�� Simulation results
Infineon Light Desk
www.infineon.com/lightdesk 21
Support Tools
Support ToolsApplication Notes
Description Info number / Internet link
ICB2FL01G smart ballast control IC for fluorescent lamp ballasts demoboard for 54W T5 single lamp design with voltage mode preheating
AN ICB2FL01Gwww.infineon.com/smartlighting
ICB2FL02G smart ballast control IC for fluorescent lamp ballasts dimming demoboard 26W TC-TEL single lamp design
AN ICB2FL02Gwww.infineon.com/smartlighting
ICB2FL03G smart ballast control IC for fluorescent lamp ballasts demoboard for 54W T5 single lamp design with voltage mode preheating
AN ICB2FL03Gwww.infineon.com/smartlighting
Quasi-resonant flyback converter for phase cut dimming with high power factor AN-ICL8002G-LED-flyback demoboard
Non-isolated buck converter for phase cut dimming with high power factor AN-ICL8002G-LED-buck demoboard
120V high efficiency flyback converter for dimmable PAR38 with high power factor AN-ICL8002G-120V high efficiency flyback LED Demoboard
MR16 3W control board with ILD2035 step down LED driver AN 214www.infineon.com/LED.appnotes
MR16 7W / 10W control board using ILD4001 step down LED controller Application note AN-EVAL MR16 7W / 10W control board using ILD4001 step down LED controllerwww.infineon.com/LED.appnotes
Driving 2W to 5W LEDs with ILD4001 AN 213www.infineon.com/LED.appnotes
Driving 2W LEDs with ILD4120 AN 270www.infineon.com/LED.appnotes
Driving 1W LEDs with ILD4035 AN 215www.infineon.com/LED.appnotes
Driving half watt LEDs on a light strip with BCR320U, BCR321U or BCR420U, BCR421U AN 212www.infineon.com/LED.appnotes
Comparison of resistor biasing versus BCR401W / BCR402W LED driver biasing of +12V & +24V DC low-current LED striplights
AN 182www.infineon.com/LED.appnotes
Guide to using DALI LightNet tool demoboard for 54W T5 single lamp design with voltage mode preheating www.infineon.com/lighting
DALI control gear software stack dimming demoboard 26W TC-TEL single lamp design www.infineon.com/dali
DALI control device using XC836 demoboard for 54W T5 single lamp design with voltage mode preheating www.infineon.com/dali
DALI demo using touch sense control www.infineon.com/dali
Demoboards
Board name Product Description Order number
Evaluation board ICB2FL01G ICB2FL01G CoolMOS™ MOSFET
Demoboard for 54W T5 single fluorescent lamp design with voltage mode preheating using ICB2FL01G
AN ICB2FL03G www.infineon.com/smartlighting
Evaluation board ICB2FL02G ICB2FL03G CoolMOS™ MOSFET
Demoboard for dimmable 26W TC-TEL single fluorescent lamp design using ICB2FL02G
AN ICB2FL03G www.infineon.com/smartlighting
Evaluation board ICB2FL03G ICB2FL03G CoolMOS™ MOSFET
Demoboard for 54W T5 single fluorescent lamp design with voltage mode preheating using ICB2FL03G
AN ICB2FL03G www.infineon.com/smartlighting
230V isolated dimmable LED bulb board
ICL8002G SPD02N80C3
Demoboard for dimmable 13W LED bulb in isolated flyback topology
EVALLED-ICL8002G-B1
120V non-isolated dimmable LED bulb board
ICL8002G IPD60R2K0C6
Demoboard for dimmable 12W LED bulb in non-isolated buck topology
EVALLED-ICL8002G-B2
120V isolated dimmable LED PAR38 board
ICL8002G IPI60R190C6 IPD60R600C6 BSS225
Demoboard for dimmable 20W LED PAR38 in isolated flyback topology
EVALLED-ICL8002G-B3
MR16 3W board ILD2035 4x BAS3010A
Control board for 3W MR16 low voltage halogen replacement lamps
MR16 3W board
MR16 7W board ILD4001 BSR302N
Control board for 7W MR16 low voltage halogen replacement lamps
MR16 7W board
22
Board name Product Description Order number
MR16 10W board ILD4001 BSR302N
Control board for 10W MR16 low voltage halogen replacement lamps
MR16 10W board
ILD4001 0.7A board ILD4001 BSR302N
Evaluation board for high power LEDs at DC voltage input using ILD4001
ILD4001 0.7A board
ILD4001 1A board ILD4001 BSP318S
Evaluation board for high power LEDs at DC voltage input using ILD4001
ILD4001 1A board
ILD4120 board ILD4120 Evaluation board for high power LEDs at DC voltage input using ILD4120
ILD4120 board
ILD4035 12V board ILD4035 Evaluation board for high power LEDs at 12DC voltage input using ILD4035
ILD4035 12V board
ILD4035 24V board ILD4035 Evaluation board for high power LEDs at 24DC voltage input using ILD4035
ILD4035 24V board
ILD4180 board ILD4180 Evaluation board for high power LEDs voltage input using ILD4180
Demoboard ILD4180
ILD1151 in boost in voltage mode topology
ILD1151 Boost to GND configuration (B2G) – topology BOOST in voltage mode
Demoboard ILD1151 Ver1
ILD1151 in boost topology
ILD1151 Boost to GND configuration + short to GND protection (B2G + S2G) – topology BOOST
Demoboard ILD1151 Ver2
ILD1151 in buck-boost topology
ILD1151 Boost to battery (B2B) – topology BUCK / BOOST
Demoboard ILD1151 Ver3
ILD1151 in buck-boost topology (Sepic configuration)
ILD1151 SEPIC configuration – topology BUCK / BOOST
Demoboard ILD1151 Ver4
BCR450 board BCR450 BAS3007A-RPP
Evaluation board for mid & high power LEDs voltage input using BCR450
BCR450 board
BCR320U board BCR320U BAS3007A-RPP
Evaluation board for mid power LEDs voltage input using BCR320U
BCR320U HW LED board
BCR402W 12V board BCR402W BAS3010A LED strip for low power LEDs voltage input using BCR402W
BCR402W 12V LED board
BCR402W 24V board BCR402W BAT64-03W LED strip for low power LEDs voltage input using BCR402W
BCR402W 24V LED board
ILD6070 board ILD6070 Evaluation board for high power LEDs at DC voltage input using ILD6070
EVALLED-ILD6070
ILD6150 board ILD6150 Evaluation board for high power LEDs at DC voltage input using ILD6150
EVALLED-ILD6150
Evaluation board XC82x Easy Kit
XC822 Evaluation board for XC82x 8-bit microcontrollers series
KIT_XC822_EK_V1
Evaluation board XC83x Easy Kit
XC836 Evaluation board for XC83x 8-bit microcontrollers series
KIT_XC836_EK_V1
DALI PHY adapter Adapter board to connect 8-bit microcontroller evaluation boards to simulate and configure a DALI network on physical DALI bus
KIT_XC822_XC836_DALI
Demoboards
Support Tools
23
Infineon Technologies – innovative semiconductor solutions for energy efficiency, mobility and security.
Published by Infineon Technologies AG85579 Neubiberg, Germany
© 2013 Infineon Technologies AG. All Rights Reserved.
Visit us:www.infineon.com
Order Number: B127-H9377-G3-X-7600Date: 03 / 2013
ATTENTION PLEASE!The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warran-ties and liabilities of any kind, including without limita- tion warranties of non-infringement of intellectual property rights of any third party.
INFORMATIONFor further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com).
WARNINGSDue to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reason-able to assume that the health of the user or other persons may be endangered.
Ask Infineon. Get connected with the answers.Where you need it. When you need it.
Infineon offers its toll-free 0800/4001 service hotline as one central number, available 24/7 in English, Mandarin and German.
Our global connection service goes way beyond standard switchboard services by offering qualified support on the phone. Call us!
� Germany ..................... 0800 951 951 951 (German/English)
� China, mainland ......... 4001 200 951 (Mandarin/English)
� India ........................... 000 800 4402 951 (English)
� USA ............................ 1-866 951 9519 (English/German)
� Other countries ........... 00* 800 951 951 951 (English/German)
� Direct access .............. +49 89 234-0 (interconnection fee, German/English)
* Please note: Some countries may require you to dial a code other than “00” to access this international number, please visit www.infineon.com/service for your country!
Where to BuyInfineon Distribution Partners and Sales Offices
Please use our location finder to get in contact with your nearestInfineon distributor or sales office.
www.infineon.com/WhereToBuy