Printable Party Favors
CONGRATULATIONS GRADUATE!
What’s Inside
1.1 Glasses2.1 Bow Tie/Hair Bow3.1 Tabletop Logos4.1 Cupcake Toppers5.1 Straw Toppers6.1 Banners7.1 Photo Props
Tip: Print on cardstock for sturdier results, or download and bring to your local printer for better quality!
1
1
2
2 Class of 2020
#Rider2020
GLASSES
1.1 1. Cut along the dotted line. 2. Tape the flaps at the edge of glasses to the flaps at the edge of the numbered temple piece.
1
1
2
2
1 2
1
2 Class of 2020
#Rider2020
20 20Class of
BOW TIE/HAIR BOW
2.1 1. Cut along the dotted line.2. Use a hole punch or poke holes through the two pairs of gray holes in the center of the bow.3. Run a string or rubberband through the back of one hole and then through the front of its pair. Bring around through the backand repeat for the second pair of holes, then tie off around the neck or hair strand.
20 20Class of
Congratulations #Rider2020
TABLETOP LOGOS
3.1 1. Cut along the dotted line.2. Fold red tabs inward to support the logo.
Class of
2 0 2 0
Class of
2 0 2 0Congrats
GRAD
4.1
CUPCAKE TOPPERS
1. Cut along the dotted line.2. Attach to lollipop stick.3. Place in cupcake or muffin and serve.
Class of
2 0 2 0Congrats
GRAD
CongratsGRAD
Class of2 0 2 0
STRAW TOPPERS
1. Cut along the dotted line.2. Punch holes as indicated.3. Slide straw through holes along the back, making sure not to cover the artwork.
5.1
Class of
2 0 2 0
Congrats
GRAD
BR O N C
S
RI D E
R
Cl a s s
o f
2 0 20
RIDER BRONCS 2020 BANNER
1. Cut along the dotted line.2. Punch holes as indicated and string through each piece (see below).
6.1
R
I
D
E
R
B
R
O
N
C
S
Cl
as
s
of
2
0
2
0
Class of
2 0 2 0
PHOTO PROPS
1. Cut along dotted line.2. Attach to stick and use as a prop for photos.
7.1
Class of
2 0 2 0