WATER-BASED POLYOLEFIN DISPERSIONX-00212-03_2019.01.S01.1000P
樹脂事業部機能樹脂営業部 機能樹脂第一グループ (東京)TEL 03‐3246‐7610 (大阪)TEL 06‐6281‐5551
www.unitika.co.jp/plastics/
変性ポリオレフィン樹脂水性分散体「アローベース」の中でも、難接着材料として有名なポリプロピレン(PP)との密着性に特化した銘柄をご紹介します。これらはPPのみならず、種々の基材(樹脂基材、金属基材など)とも良好な密着性、接着性を発現します。従来のアローベース同様、環境対応(非塩素系、BTXフリー)、乳化剤不使用という点も特徴となっています。
ARROWBASEPP用接着剤・プライマー
接着のコンセプト・使用イメージ
接着成分が水中に分散
アローベース
PP基材
金属材料、極性材料
(例)PP基材/金属・極性材料の接着
PP(オレフィン系)親和部位極性材料親和部位
OPP/各種基材の接着データ
OPP/接着層/貼り合わせ基材構成
接着:110℃熱圧着(PEは85℃に変更)接着層厚み:20μm剥離試験:T型剥離
様々な基材に対して優れた接着性
接着強度(N/25mm)
貼り合わせ基材OPP PET Al PE
15
10
5
0
同種基材 異種基材
架橋処方の一例(耐熱性向上)
サンプル:基材/ AC(0.5μm) / 押出PP(55μm)積層方法:PP押出しラミネート(240℃(ダイ直下実温))レトルト試験:水を内包した袋サンプルを作製し、125℃×30min処理剥離試験:T型剥離
アローベースDA(非架橋)
アローベースDA(架橋処方)
接着強度(N/25mm)
PP/Al PP/PET PP/Al PP/PET PP/Al PP/PET
8
6
4
2
0
初期 レトルト試験後
他社品
初期接着UP
耐熱性UP
特性
樹脂種
固形分濃度
pH
粘度
変性ポリオレフィン樹脂
20-30wt%
9-11
~500mPa・s
用途提案
建材電気電子部材、自動車部材 工業用ラミネート品
アローベースの各銘柄位置付け
接着樹脂融点(℃)60 100 150
耐熱低融点低分子量
高融点高分子量
DA
TDTC
SB
SE
YA DB
初期強度低温接着
架橋処方(1液タイプ)
+α
接着樹脂主骨格(オレフィン骨格)接着樹脂変性部位(極性官能基) 架橋剤
耐熱性UP 接着樹脂凝集力UP
分子量
高
低
PP系 PE系 1液架橋タイプ(熱架橋)接着樹脂成分
基材へ塗布、水の除去(乾燥)1
貼り合わせ、接着2
WATER-BASED POLYOLEFIN DISPERSIONX-00212-03_2019.01.S01.1000PTokyo TEL +81-3-3246-7610 Osaka TEL +81-6-6281-5551
Plastics Division www.unitika.co.jp/plastics/e/
ARROWBASE
Concept and Usage A�nity moiety to polypropylene (ole�n)
A�nity moeity to polar material
Adhesion of OPP / each substrates
OPP / Adhesive / Lamineted substrateComposition
Condition of adhesion :Thermal compression bonding at 110°C(Change to 85°C for PE)Adhesive layer thickness : 20µmPeel test : T-peel test
Excellent adhesionto various substrates
Adh
esio
n st
reng
th
(N/2
5mm
)
Lamineted substrate
OPP PET Al PE
15
10
5
0
Samesubstrate
Di�erentsubstrate
Example of Cross-linking system(Improved heat resistance)
Sample : Substrate / AC (0.5μm) /extruded PP �lm (55μm)Lamination method : PP extrusion lamination at 240°C (Temperture immediately below die)Retort test : A bag sample containing water was prepared and treated at 125°C for 30 minutes.Peel test : T-peel test
Arrowbase DA(Non cross-linking)
Arrowbase DA(Cross-linking)
Adh
esio
n st
reng
th
(N/2
5mm
)
PP/Al PP/PET PP/Al PP/PET PP/Al PP/PET
8
6
4
2
0
Initial peel strength After retort test
Other product
Improved
initial peel st
rengthIm
proved
heat-resist
ance
Type
Solid content
pH
Viscosity
Modi�ed polyole�n resin
20-30wt%
9-11
~500mPa・s
Applications
Building materials Industrial laminating products
The positioning of each brand of “Arrowbase”
The adhesive component is dispersed in water.
Arrowbase
Polypropylene substrate
Metals, Polar materials
e.g. Adhesion of PP substrate / Metals or Polar materials
Application to substrate and drying (Removal of water)1
Pasting, Adhesion2
"Arrowbase" is a modi�ed polyole�n resin water-based dispersion and shows good adhesion to Polypropylene, which is a representative of hard-to-bond materials. This can be also used as good adhesive or primer for various materials (other resins, metals and so on) as well as Polypropylene. Furthermore, "Arrowbase" has the feature of soap free and environmental harmony (non-chlorine and BTX free).
WATER-BASED ADHESIVE AGENT / PRIMER FOR POLYPROPYLENE
Property
Melting point of adhesive resin (°C)
60 100 150
Heat resistanceDA
TDTC
SB
YA DB
Initial strength Lower-temperature
adhesive
SE
PP type PE typeAdhesive resin component
High
Low
Mol
ecul
ar w
eigh
t
Higher melting pointHigher molecular weight
Lower melting pointLower molecular weight
Cross-linking system(One-pack type)
+α
Basic structure of adhesive resin (olefin structure)Modified moiety of adhesive resin (polar functional group)Cross-linker
Improvement of heat resistance
Increasement of adhesive resin cohesive force
One-pack type thermal cross-linking
Electrical and electronic components,automotive member