Download - Power tools safety
Done by: G. Tulloch
Power Tools Safety
Power ToolsWorking with power tools, you can get an
electric shock, lose a finger, lose an eye, or go deaf. It's especially dangerous to use a tool that's defective, that's been modified, or that's not designed for the job. Of course, you can also get injured if you use any tool carelessly.
Power Tool SafetyPower tools are very common to any
production facility. They can expose employees to multiple hazards if they are not maintained and used properly.
It is critical that you know how to maintain, test and operate any power tool you intend to use.
Hazardous Conditions and Unsafe ActsBroken and defective toolsMissing guards, exposed belts and blades Bad electrical cordsMisuse of toolsCracked and split handlesNot using required PPE
HazardWorkers using hand and power toolsMay be exposed to thesehazards:
Objects that fall, fly, are abrasive, or splash Harmful dusts, fumes, mists, vapors, and gases Frayed or damaged electrical cords, hazardous connections and improper grounding Vibration and impact
Potential OutcomesBruises, sprains and strainsStruck by projectilesLacerations and amputations Entanglement Eye and face injuries due to flying objectsShocks and electrocutions
Potential OutcomesFlash burnsFallingHearing loss Crushing, cuts or losing a body partErgonomic injuries
Precautions to be Taken•Maintain regularly inspection before use•Use the right tool for the right job• Operate according to manufacturers’ instructions • Use the right Personal Protective Equipment (PPE)• Use guarding
PrecautionsDo not use defective toolsUse tied-off containers to keep tools from
falling off of molds or work platforms. Return tools to their storage places after use.Floors should be kept as clean and dry as
possible to prevent accidental slips with or around dangerous tools.
Keep tools away from aisle areas and other employees working in close proximity.
TipsDo not perform "make-shift" repairs to
tools.Do not carry tools in your hand when
climbing, or by the cord. Do not throw tools from one location to
another, from one employee to another, from scaffolds or other elevated platforms.
Do not remove or bypass guards
Things To DoWatch your hands and fingers. Keep your mind on your work. Grip tools firmly. Operate according to the manufacturer's
instructions. Never carry a tool by the cord or hose. Never yank the cord or the hose to
disconnect it from the receptacle. Disconnect tools when not in use, before
servicing, and when changing accessories such as blades, bits and cutters.
Con’tGround all tools unless double insulated. Avoid dangerous environments. Do not use
power tools in a damp, wet and/or explosive atmosphere -- fumes, dust or flammable materials.
Secure work with clamps or a vise, freeing both hands to operate the tool.
Do not hold a finger on the switch button while carrying a plugged-in tool.
Con’tBe sure to keep good footing and maintain
good balance. The proper apparel should be worn. Loose
clothing, or jewelry can become caught in moving parts.
Don't use an accessory or attachment unless the power tool manufacturer recommends its use on the product
Keep cords and hoses away from heat, oil, and sharp edges.
Defective Power Tool. Do Not Use!Pull This From Service.
14
This worker is doing his part by notifying his supervisor of a defective tool.
15
Electricity and Water is a Dangerous Combination
16
Personal Protective Equipment A hard hat protects the head from falling
limbs or branches.A mesh full-face shield prevents injury from
flying wood chips and twigs. Protect ears from the high level of noise by
using earplugs.Chainsaw safety boots and chaps, protect
the feet and legs in the event of accidental contact
Head ProtectionMost workers are
killed by being struck in the head.
Without a Hardhat, even the smallest piece of wood can be deadly.
Designed to absorb energy.
Must be ANSI approved.
Must be worn !
Foot ProtectionIf the worker uses a chain saw, boots must
be cut resistant that will protect against chain saw contact.
Cut resistant boots are UL approved.
Operator’s Manual Keep the operator’s manual with the chain
saw. If the manual is missing, contact the
manufacturer for a replacement. Periodically review the manual for safe
operating procedures.
Preventive Maintenance Keep Power Tools in good repair.Consult the operator’s manual and check
for needed maintenance before each use. The operator’s manual can be the best
source of information for this procedure.