Download - Pneumatic Actuator Information
AP
I 6A
Ac
tuAt
or
sManufacturers of high quality pneumatic and hydraulic actuators for on and off-shore wellhead surface safety, drilling, distribution and storage applications.
An ARRAY HoLDINGs company © 2010Document # Br-0100-00 rev B,
DEDICATED TO SERVICEWhether you are a small independent operator
or a diversified energy services company,
Array is committed to being your actuation partner.
You
r A
CTU
ATIO
N P
AR
TNER
IN
to
DAY
’s c
oM
PEt
ItIV
E
oIL
AN
D G
As IN
Du
str
Y.
ARRAY – DEDICATED TO SERVICE
In today’s highly competitive oil and gas industry you need
an Actuation supplier who can:
• Provide high-quality, reliable actuators
• Address the actuation needs of multiple industry segments
• respond to unique configuration requirements
• Actuate valves from any manufacturer
• Deliver a full suite of necessary accessories
• stay on schedule and within budget
At Array, our focus is on being your actuation partner.
our global sourcing network and domestic manufacturing
facilities ensure that Array has the ability to respond
to both short and long term procurement horizons,
configuration challenges, accessory requirements and
budget constraints.
Whether you are looking for a wellhead safety valve for
on or off-shore use, an automated drilling valve or a
storage system safety shutdown valve, Array wants to be
your actuation partner.
TAB
LE o
f C
ON
TEN
TSfo
r A
rr
AY A
ctu
Ato
rs
TABLE OF CONTENTS
our Environment – Make a Difference 5
Actuator Models and configuration options 7
Model APD Pneumatic Diaphram Actuator 9
Model APH Hydraulic Actuator 11
Model APHD Hydraulic Double Acting Actuator 13
Model APHW Hydraulic Actuator 15
Model APP Piston Pneumatic Actuator 17
Model APPM Piston Pneumatic Actuator 19
Limited Warranty 22
Array actuators are designed to be used as safety and
control systems in drilling, wellhead, distribution and storage
applications both on and off-shore.
the sole purpose of every actuator manufactured by Array is
to control the flow of volatile, often toxic, liquids and gases and
keep them from being emitted into the atmosphere or spilled
on the ground or into the water.
that is why every actuator we sell is manufactured to exceed
standards set forth by the American Petroleum Institute (API) in
specification 6A, Latest Edition and why Array’s quality systems
and the quality systems of all of our suppliers are certified by
API and/or the International standards organization (Iso).
It is also why we spend so much time working closely with our
customers and suppliers to continuously improve the quality
of our actuators, as well as the efficiency of our systems –
because we recognize that the quality of our products can
positively impact the quality of our environment.
It is our primary concern and motivation.
OU
R E
NVI
RO
Nm
ENT
MAk
E A
DIf
fEr
ENc
E
API License # 6A-0557
page 6
Array pneumatic and hydraulic actuators are available in a wide range of sizes and configurations suitable for on and off-shore
wellhead surface safety, drilling, distribution and storage applications. Array also offers a full range of accessories for all of
its actuators – for more information please see the Array Actuator Accessory Brochure.
Pneumatic Actuator Models
Hydraulic Actuator Models
APDPneumatic Diaphragm
APHHydraulic/spring return
APPPneumatic Piston
APHDHydraulic/Double Acting
APPMPneumatic Piston
APHWHydraulic/Wirecutting/
spring return
page 7
CO
NFI
GU
RAT
ION
OP
TIO
NS
for
Ar
rAY
Ac
tuAt
or
s
Actuated Valve Assembly:
All Array actuators can be delivered already mounted on Array gate valves,
tested and ready to put into service. completed assemblies are shipped
directly to field locations or customer warehouses as required. Array stocks
a complete line of actuated valve assemblies for rapid deployment.
Actuator & Bonnet Assembly (Customer Mount):
Most Array actuators can be delivered complete with a bonnet assembly
designed to mount directly on another manufacturer’s valve that is prepared
for actuator. Array actuators are routinely shipped to customers all over the
world for local mounting and testing by the customer.
Actuator & Bonnet Assembly (Array Mount):
Array actuators can be mounted directly on customers’ valves and tested at
Array facilities prior to deployment. this can reduce lead time and allow
customer personnel to focus on other aspects of the project.
page 8
ACTUATOR mODEl
CONFIGURATION COmPARISON APD APP APPm APH APHW APHD
MotIoN Linear Linear Linear Linear Linear Linear
coNtroL MEDIuM Pneumatic Pneumatic Pneumatic Hydraulic Hydraulic Hydraulic
cAN AccoMMoDAtE H2s (sour) coNtroL MEDIuM No Yes Yes N/A N/A N/A
LoW tEMP VErsIoN AVAILABLE (-50f, -46 c) No Yes Yes Yes Yes Yes
PrEssurIZED HousING Yes Yes Yes No No Yes
PErMANENt DrIft sEttING Yes Yes Yes Yes Yes Yes
BAck sEAt fIrEsEAL standard standard standard standard standard optional
oPtIoN to ADAPt to ANY MANufActurEr’s VALVE Yes Yes No* Yes Yes Yes
MANuAL oVErrIDE Available Available Integrated Available Available Available†
fusIBLE MANuAL oVErrIDE Available Available N/A Available Available Available†
MANuAL Lock oPEN DEVIcE Available Available N/A Available Available Available†
fusIBLE Lock oPEN DEVIcE Available Available N/A Available Available Available†
PosItIoN INDIcAtor (LIMIt sWItcH) AssEMBLY Available Available N/A Available Available Available
coMPLEtE rEDrEss kIts AVAILABLE Yes Yes Yes Yes Yes Yes
* the Model APPM is only offered as a complete actuated valve assembly
† the Model APHD is not a fail-safe actuator. Accordingly, manual overrides and lock open devices do not open the valve but rather hold the valve in the down position, which could be open or closed depending on the gate configuration
Parts list includes items in a typical bonnet assembly. some differences may exist in bonnets for valves manufactured by
companies other than Array. In those cases the specific differences are usually limited to the design of the bottom of the
bonnet and operating stem.
page 9
top shaft
top seal Package
Diaphragm
Actuator spring
Bonnet ring
Diaphragm Nut
Lower Housing
upper Housing
Pressure relief Device
Vent fitting
Bonnet stem
Bonnet Packing
Valve Bonnet
Drift shims
Packing retainer
page 10mODEL APD PNEUmATIC DIAPHRAGm ACTUATORFOR API 6A WELLHEAD GATE VALVES (SINGLE ACTUATOR APPLICATIONS)
GENERAL DESCRIPTION
the Model APD actuator is a diaphragm type, pneumatically-powered gate valve actuator designed to operate a “fail-closed” or “fail-open” safety valve. It is ideally suited for wellhead safety valve applications, flow lines, header valves and gathering lines. It can also be used for casing relief valve and storage valve applications.
the Model APD actuator is lightweight, easy to maintain and engineered to ensure years of trouble-free service in the harshest of environments and operating conditions on land or off-shore.
the Model APD actuator can be delivered as an actuated valve assembly ready to be placed in service or as an actuated bonnet assembly ready to mount on another manufacturer’s valve.
(shown with typical bonnet assembly)
FEATURES AND BENEFITS
Longer Top Shaft Seal Life: PolyPak™ seals are used for top shaft dynamic sealing applications. these seals are protected from accumulation of dirt and debris by a durable wiper ring. these two features provide long seal life and minimal maintenance.
Ease of Maintenance: top shaft seals are easily replaced in the field by simply removing a retainer ring. Disassembly of the actuator or upper housing is not required for seal replacement.
Improved Corrosion Control: All non-stainless components are coated with Xylan and Polyester tGIc providing resistance against the corrosive effect of harsh environments.
Over-pressurization Protection: A pressure relief device on the actuator top case protects personnel from over-pressurization of the actuator assembly. It is located for easy field inspection and replacement.
Confirmation of Bonnet Stem / Back Seat Seal Integrity: the bonnet is designed with a test fitting below the bonnet seals. this test fitting provides for verification of the bonnet stem metal to metal backseat pressure sealing integrity.
Visual Confirmation of Bonnet Packing Integrity: A tattletale port located above the bonnet packing seals provides visual confirmation of the packing integrity. the Bonnet is provided with a port that can be tubed to a containment vessel to present escape of fugitive emissions into the atmosphere.
Modular Design: tandem boosters (additional diaphragm actuators) can be mounted in the factory or the field to provide higher actuation force.
Multiple Safeguards Against Well Fluids Contamination: the bonnet incorporates multiple safeguards against the invasion of well fluids into the actuator housing. these safeguards are:
• Metal to metal back seat/stem seal
• Multiple Polypak™ bonnet stem seals
• Packing integrity port
• secondary backup seals utilize o-rings
Personnel Safety: Locking screws below the bonnet ring prevent free rotation of the actuator. this guards against personnel injury should the actuator be used as a step during field service operations.
mODEL SIZE STROKES AVAILABLE
APD 1000 10" up to 2 1⁄16" bore
APD 1200 12" up to 3 1⁄8" bore
APD 1500 15" up to 4 1⁄16" bore
APD 1800 18" up to 5 1⁄8" bore
APD 2000 20" up to 7 1⁄16" bore
Parts list includes items in a typical bonnet assembly. some differences may exist in bonnets for valves manufactured by
companies other than Array. In those cases the specific differences are usually limited to the design of the bottom of the
bonnet and operating stem.
page 11
top shaft
top seal Package
PistonPiston seal
Actuator spring
Vent fitting
Bonnet stem
Bonnet Packing
Valve Bonnet
Pressure relief Device
Actuator Housing
cylinder
Drift shims
Packing retainer
Bonnet ring
mODEL APH HYDRAULIC ACTUATORFOR API 6A WELLHEAD GATE VALVES
GENERAL DESCRIPTION:
the Model APH actuator is a piston type, hydraulically-powered gate valve actuator designed to operate a “fail-closed” or “fail-open” safety valve. It is ideally suited for wellhead safety valve applications, flow lines, header valves and gathering lines. It can also be used for casing relief valve and storage valve applications.
the Model APH actuator is compact, easy to maintain and engineered to ensure years of trouble-free service in the harshest of environments and operating conditions on land or off-shore.
the Model APH actuator can be delivered as an actuated valve assembly ready to be placed in service or as an actuated bonnet assembly ready to mount on another manufacturer’s valve.
FEATURES AND BENEFITS:
Longer Top Shaft Seal Life: the top shaft seals are Polypak™ seals designed for dynamic sealing applications. the top shaft seals are protected from dirt and debris by a molythane rod wiper. the two design features guarantee a longer seal life requiring minimal maintenance.
Non-Pressurized Spring Housing: the non-pressurized housing is designed as a structural protective member for the actuator cylinder, piston and springs. this prevents any injury to personnel or equipment in the event of debris or tools impacting the housing.
Improved Corrosion Control: All non-stainless components are coated with Xylan and Polyester tGIc providing resistance against the corrosive effect of harsh environments.
Over-Pressurization Protection: A pressure relief device protects the piston and cylinder assembly from over-pressurization and protects personnel from injury. It is located externally for easy field inspection and replacement.
Confirmation of Bonnet Stem / Back Seat Seal Integrity: the bonnet is designed with a test fitting below the bonnet seals. this test fitting provides for verification of the bonnet stem metal to metal backseat pressure sealing integrity.
Permanent and Tamper Proof Drift Setting: the valve drift is provided with stainless steel drift shims that are located on the top of the packing retainer. the location of the shims inside the spring housing ensures that the valve drift is tamper proof.
Multiple Safeguards Against Well Fluids Contamination: the bonnet incorporates multiple safeguards against the invasion of well fluids into the actuator housing. these safeguards are:
• Metal to metal back seat/stem seal
• Multiple Polypak™ bonnet stem seals
• Packing integrity port
• secondary backup seals utilize o-rings
Personnel Safety: Actuator can be completely removed and disassembled using simple hand tools. the cylinder module can be removed from the housing without removing the actuator from bonnet. the spring can be easily removed from the compressed position to the relaxed position or free length by hand using a wrench.
(shown with typical bonnet assembly)
mODEL SIZE STROKES AVAILABLE
APH 025 21⁄2" up to 2 9⁄16" bore
APH 035 31⁄2" up to 4 1⁄16" bore
APH 045 41⁄2" up to 6 3⁄8" bore
APH 065 61⁄2" up to 7 1⁄16" bore
APH 095 91⁄2" up to 7 1⁄16" bore
page 12
Parts list includes items in a typical handwheel bonnet assembly. some differences may exist in bonnets for valves manufactured
by companies other than Array. In those cases the specific differences are usually limited to the design of the bottom of the bonnet,
operating stem, and nose geometry.
page 13
top shaft
set screws
Bonnet stem
Piston
cylinder head
Piston seal
Packing Injection fitting
Bonnet Packing
Valve Bonnet
Pressure relief Device
Wear Bearing
stem seals
cylinder
Packing retainer
Bonnet Bushing
page 14mODEL APHD HYDRAULIC DOUBLE ACTING ACTUATORFOR API 6A WELLHEAD GATE VALVES
GENERAL DESCRIPTION:
the Model APHD actuator is a piston type, hydraulically-powered gate valve actuator designed to operate a slab gate valve in both open and close directions. It is ideally suited for choke-and-kill, fracture or other drilling manifold applications where complete hydraulic control of gate valve position is required.
the Model APHD actuator is compact, easy to maintain and engineered to ensure years of trouble-free service in the harshest of environments and operating conditions.
the Model APHD actuator can be delivered as an actuated valve assembly ready to be placed in service or as an actuated bonnet assembly ready to mount on another manufacturer's valve.
FEATURES AND BENEFITS:
Housing: the pressurized housing is designed as a protective member for the piston and stem. the design is symmetrical thereby simplifying assembly. A hard plated wear surface protects and ensures seal integrity.
Over-Pressurization Protection: Dual pressure relief devices protect the piston and cylinder assembly from over-pressurization and protect personnel from injury. they are located externally for easy field inspection and replacement.
Ease of Maintenance: top shaft can be replaced by removal of top cylinder head. to replace piston seal, remove piston from actuator housing. this concept provides easy removal and seal replacement.
Longer Top Shaft Seal Life: the top shaft seals are Polypak™ designed for dynamic sealing applications. the top shaft seals are protected from dirt and debris by a molythane rod wiper. these two design features guarantee a longer seal life requiring minimal maintenance.
Permanent and Tamper Proof Drift Setting: the valve drift is provided by an external drift adjustment. the rotation of the lower cylinder base internally adjusts the piston stroke for proper gate bore alignment. the bonnet bushing secures the lower cylinder base by means of heavy duty fasteners.
Improved Corrosion Control: All non-stainless components are coated with Xylan and Polyester tGIc providing resistance against the corrosive effect of harsh environments.
Multiple Safeguards Against Well Fluids Contamination: the bonnet incorporates multiple safeguards against the invasion of well fluids into the actuator housing. these safeguards are:
• Multiple Polypak™ bonnet stem seals
• Packing integrity port
• secondary backup seals that utilize o-rings and back up rings
(shown with typical handwheel bonnet assembly)
mODEL SIZE STROKES AVAILABLE
APHD 035 31⁄2" up to 4 1⁄16" bore
APHD 045 41⁄2" up to 7 1⁄16" bore
APHD 065 61⁄2" up to 7 1⁄16" bore
APHD 095 91⁄2" up to 7 1⁄16" bore
Parts list includes items in a typical bonnet assembly. some differences may exist in bonnets for valves manufactured by
companies other than Array. In those cases the specific differences are usually limited to the design of the bottom of the
bonnet and operating stem.
page 15
top shaft
top seal Package
Inner Actuator spring
outer Actuator spring
Vent fitting
Bonnet stem
Valve Bonnet
Piston
Pressure relief Device
Piston seal
Actuator Housing
Drift shims
Packing retainer
Bonnet ring
Bonnet Packing
page 16mODEL APHW HYDRAULIC ACTUATORFOR API 6A WELLHEAD GATE VALVES
GENERAL DESCRIPTION:
the Model APHW actuator is a piston type, hydraulically-powered gate valve actuator designed to provide fail-safe closure in the event of a wireline accident. It employs a dual coil spring return system that delivers sufficient return force to guarantee severance of standard wireline or slickline, 7/32" logging or 3/16" stainless steel cables.
the Model APHW actuator provides sufficient closing force to shear logging or stainless cable in most standard wellhead applications with zero valve body pressure in typical valves up to 7 1/16" bore.
the Model APHW actuator is powerful, easy to maintain and engineered to ensure years of trouble-free service in the harshest of environments and operating conditions on land or off-shore.
the Model APHW actuator can be adapted for use on any manufacturer’s valve.
FEATURES AND BENEFITS:
Longer Top Shaft Seal Life: the top shaft seals are Polypak™ seals designed for dynamic sealing applications. the top shaft seals are protected from dirt and debris by a molythane rod wiper. the two design features guarantee a longer seal life requiring minimal maintenance.
Non-Pressurized Spring Housing: the non-pressurized housing is designed as a structural protective member for the actuator cylinder, piston and springs. this prevents any injury to personnel or equipment in the event of debris or tools impacting the housing.
Improved Corrosion Control: All non-stainless components are coated with Xylan and Polyester tGIc providing resistance against the corrosion effect of harsh environments.
Over-Pressurization Protection: A pressure relief device protects the piston and cylinder assembly from over-pressurization and protects personnel from injury. It is located externally for easy field inspection and replacement.
Confirmation of Bonnet Stem / Back Seat Seal Integrity: the bonnet is designed with a test fitting below the bonnet seals. this test fitting provides for verification of the bonnet stem metal to metal backseat pressure sealing integrity.
Permanent and Tamper Proof Drift Setting: the valve drift is provided by stainless steel drift shims that are located on the top of the packing retainer. the location of the shims inside the spring housing ensures that the valve drift is tamper proof.
Multiple Safeguards Against Well Fluids Contamination: the bonnet incorporates multiple safeguards against the invasion of well fluids into the actuator housing. these safeguards are:
• Metal to metal back seat/stem seal
• Multiple Polypak™ bonnet stem seals
• Packing integrity port
• secondary backup seals utilize o-rings
Personnel Safety: Actuator can be completely removed and disassembled using simple hand tools. the cylinder module can be removed from the housing without removing the actuator from bonnet. the springs can be easily removed from the compressed position to the relaxed position or free length by hand using a wrench.
(shown with typical bonnet assembly)
mODEL SIZE STROKES AVAILABLE
APHW 045 4 1⁄2" up to 6 3⁄8" bore
APHW 065 6 1⁄2" up to 7 1⁄16" bore
APHW 095 9 1⁄2" up to 7 1⁄16" bore
top shaft
top seal Packagetop Plate Assembly
spring
Lower Plate Assembly
Vent fitting
Bonnet stem
Bonnet Packing
Valve Bonnet
retainer Nut
Piston Assembly
Parts list includes items in a typical bonnet assembly. some differences may exist in bonnets for valves manufactured by
companies other than Array. In those cases the specific differences are usually limited to the design of the bottom of the
bonnet and operating stem.
Pressure relief Device
cylinder
Drift shims
Packing retainer
Bonnet ring
page 17
mODEL APP PISTON PNEUmATIC ACTUATORFOR API 6A WELLHEAD GATE VALVES
GENERAL DESCRIPTION:
the Model APP actuator is a piston type, pneumatically-powered gate valve actuator designed to operate a “fail-closed” or “fail-open” safety valve. It is ideally suited for wellhead safety valve applications, flow lines, header valves and gathering lines. It can also be used for casing relief valve and storage valve applications.
the Model APP actuator is lightweight, easy to maintain and engineered to ensure years of trouble-free service in the harshest of environments and operating conditions on land or off-shore.
the Model APP actuator can be delivered as an actuated valve assembly ready to be placed in service or as an actuated bonnet assembly ready to mount on another manufacturer’s valve.
FEATURES AND BENEFITS:
Longer Top Shaft Seal Life: Polypak™ seals are used for top shaft dynamic sealing applications. these seals are protected from accumulated dirt and debris by a durable wiper ring. these two features provide long seal life and minimal maintenance.
Ease of Maintenance: top shaft seals are easily replaced in the field by simply removing a retainer ring. replacement of the piston seal is accomplished by removing the top plate from the cylinder. there is no need to disassemble the cylinder from the lower plate housing.
Control Port Positioning: the retainer ring connection of the top head plate to the cylinder housing permits the control pressure port to be placed in any position. this self cleaning feature adds service life to the actuator by reducing internal corrosion caused by accumulated fluid build-up in the cylinder.
Improved Corrosion Control: All non-stainless components are coated with Xylan and Polyester tGIc providing resistance against the corrosive effect of harsh environments.
Over-Pressurization Protection: A pressure relief device protects the piston and cylinder assembly from over-pressurization and protects personnel from injury. It is located externally for easy field inspection and replacement.
Confirmation of Bonnet Stem / Back Seat Seal Integrity: the bonnet is provided with a test fitting installed below the bonnet seals that provides for verification of the bonnet stem metal to metal back seat pressure sealing integrity.
Permanent and Tamper Proof Drift Setting: the valve drift is provided by stainless steel drift shims that are located on the top of the packing retainer. the location of the shims inside the spring housing ensures that the valve drift is tamper proof.
Multiple Safeguards Against Well Fluids Contamination: the bonnet incorporates multiple safeguards against the invasion of well fluids into the actuator housing. these safeguards are:
• Metal to metal back seat/stem seal
• Multiple Polypak™ bonnet stem seals
• Packing integrity port
• secondary backup seals utilize o-rings
Personnel Safety: Locking screws below the bonnet ring prevent free rotation of the actuator. this guards against personnel injury should the actuator be used as a step during field service operations.
(shown with typical bonnet assembly)
page 18
mODEL SIZE STROKES AVAILABLE
APP 1300 13" up to 5 1⁄8" bore
APP 1800 18" up to 7 1⁄16" bore
APP 2000 20" up to 11" bore
page 19
Parts list includes items in a typical bonnet assembly. some differences may exist in bonnets for valves manufactured by
companies other than Array. In those cases the specific differences are usually limited to the design of the bottom of the
bonnet and operating stem.
top shaftPiston Housing
Lower Plate Assembly
Bonnet stem MaleBonnet stem
Bonnet Packing
Valve Bonnet
Wear Bearing
Actuator spring
Piston Assembly
Pressure relief Device
Inner stroke Adjuster
outer stroke Adjuster
Packing retainer
Integrated Manual override
page 20 mODEL APPm PISTON PNEUmATIC ACTUATORFOR API 6A WELLHEAD GATE VALVES
GENERAL DESCRIPTION:
the Model APPM actuator is a piston type, pneumatically-powered gate valve actuator with an integrated manual override designed to operate a “fail-closed” or “fail-open” safety valve. It is ideally suited for wellhead safety valve applications, flow lines, header valves and gathering lines. It can also be used for casing relief valve and storage valve applications.
the Model APPM actuator is easy to maintain and engineered to ensure years of trouble-free service in the harshest of environments and operating conditions.
the Model APPM actuator is currently only delivered as a complete actuated valve assembly ready to be placed in service.
FEATURES AND BENEFITS:
Longer Top Shaft Seal Life: Polypak™ seals are used for actuator shaft sealing applications. these seals are protected from accumulation of dirt and debris by a durable wiper ring. these two features provide long seal life and minimal maintenance.
Ease of Maintenance: the APPM is easy to maintain. the Actuator design allows for easy removal of the piston housing for piston and shaft seal replacement.
Improved Corrosion Control: All non-stainless components are coated with Xylan and Polyester tGIc providing resistance against the corrosive effect of harsh environments.
Over-Pressurization Protection: A pressure relief device located on the Actuator top case protects personnel from over-pressurization of the actuator assembly. It is located for easy field inspection and replacement.
Confirmation of Bonnet Stem / Back Seat Seal Integrity: the bonnet is designed with a test fitting below the bonnet packing seals. this test fitting provides for verification of the bonnet stem metal to metal backseat pressure sealing integrity.
Flexible Adaption: the APPM Actuator can be mounted on the secondary master or wellhead flow wing. the actuator can be mounted at any point where safety shut down or safety valves are required.
Easy Closing: the APPM Actuator can manually open the gate valve in case of pneumatic control pressure loss or mechanical failure without assistance of an outside pressure source.
Visual Confirmation of Bonnet Packing: A tattletale port located above the bonnet packing seals provides visual confirmation of the packing integrity.
Multiple Safeguards Against Well Fluids Contamination: the bonnet incorporates multiple safeguards against the invasion of well fluids into the actuator housing. these safeguards are:
• Multiple Polypak™ bonnet stem seals
• Packing integrity port
• Metal to metal back seat/stem seal
• secondary seals
Pneumatic Control Supply: the APPM Actuator operates at a maximum of 250 psi.
Fail Safe Operation: the APPM Actuators will close a gate valve to the “fail safe” or “fail close” position automatically.
(shown with typical bonnet assembly)
mODEL SIZE STROKES AVAILABLE
APPM 1300 13" up to 2 1⁄16" bore
DEDICATED TO SUPPORT
Array stands firmly behind every actuator we sell or distribute. If you have a problem with the quality of any of our
products or their shipment to you, contact Array and we will immediately work to solve it.
ARRAY HOLDINGS, INC.D.B.A. ARRAY PRODUCTS
15900 Morales roadHouston, texas 77032
Phone: 281.977.8500 • www.array.com
LImITED WARRANTY
the following warranty is exclusive and in lieu of all other
warranties whether express, implied or statutory, including,
but not by way of limitation, any warranty or merchantability
or fitness for any particular purpose.
Array warrants to each original buyer of products manufactured
by Array that such products are free from defects in material
and workmanship under normal use and service for a period
of one (1) year from the date of shipment provided that no
warranty is made in respect to: 1) any product which has been
repaired or altered in such a way in Array’s judgement,
as to effect the product adversely, 2) any product which has
in Array’s judgement, been subject to negligence, accident or
improper storage, 3) any product which has not been operated
or maintained in accordance with normal practice and in
conformity with recommendations and public specifications
of Array.
Array’s obligation under this warranty is limited to use
reasonable efforts to repair, replace or at its option,
refunding the purchase price. the cost of labor for installing
a repaired or replacement product shall be borne by the
purchaser. replacement parts provided under the terms of
this warranty are warranted for the remainder of the warranty
period of the products upon which they were installed to the
same extent as if such parts were original components
thereof. Warranty serviced provided hereunder do not assume
any liability for damages caused by any delays involving
warranty service.
for complete specification information, prices and name,
address and telephone number of the Array representative
nearest you, call or write to us at the address below.
FOR WARRANTY OR SHIPmENT INFORmATION:
Attention: Logistics & Quality Manager
FOR SALES OR SPECIFICATION INFORmATION:
Attention: sales Manager
page 22
ARRAY HOLDINGS, INC.D.B.A. ARRAY PRODUCTS
15900 Morales road
Houston, texas 77032
Phone: 281.977.8500 • www.array.com