PIX Hydraulic Hose is useful for medium pressure service with high petroleum base hydraulic fluids, carrying hot oils, grease, lubricants, Crude oil, fuel oil and water. It is widely used for hydraulic fluid transmissions.
PIX also manufactures Compact Hose which is smaller in diameter with higher performance characteristic. It operates at smaller bend radius (approximately 25% to 30% smaller), its specialty is that the lining and cover thickness is less as compared to the normal hydraulic hose with same working pressure rating. It is light in weight & its compactness also offers the advantage to use in application having minimum space available.
PIX - PERFORMER (Standards: EN 853 1SN, SAE 100 R1S-AT, ISO 1436)
Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards- SAE 100 R1S AT / EN 853 1SN / ISO 1436-1SN. Highly flexible. Light weight. Easy to Handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min. Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE105 -3 5 3/16 4.8 9.5 11.5 25.0 250 3625 100.0 1000 14500 90 0.150 PF 22 05
PE106 -4 6 1/4 6.4 11.1 13.2 22.5 225 3263 90.0 900 13050 100 0.190PF 22
06
PE108 -5 8 5/16 7.9 12.7 15.0 21.5 215 3118 86.0 860 12470 115 0.234PF 22
08
PE110 -6 10 3/8 9.5 15.1 17.3 18.0 180 2610 72.0 720 10440 125 0.298PF 22
10
PE112 -8 12 1/2 12.7 18.3 20.6 16.0 160 2320 64.0 640 9280 180 0.384PF 22
12
PE116 -10 16 5/8 15.9 21.4 23.9 13.0 130 1885 52.0 520 7540 205 0.502PF 22
16
PE119 -12 19 3/4 19.0 25.4 27.6 10.5 105 1523 42.0 420 6090 240 0.649PF 22
19
PE125 -16 25 1 25.4 33.3 35.3 9.0 90 1305 36.0 360 5220 300 0.870PF 22
25
PE131 -20 31 1-1/4 31.8 40.5 43.2 6.3 63 914 25.2 252 3654 420 1.155PF 22
31
PE138 -24 38 1-1/2 38.1 46.8 50.7 5.0 50 725 20.0 200 2900 500 1.477PF 22
38
PE151 -32 51 2 50.8 60.2 64.2 4.0 40 580 16.0 160 2320 630 2.135PF 22
51
* PE163-40 63 2-1/2 63.5 73.0 78.0 5.0 50 725 20.0 200 2900 760 2.875 * *
* PE176-48 76 3 76.2 86.0 91.0 3.5 35 508 14.0 140 2030 900 3.320 * *
* PE1102-64 102 4 101.6 111.0 116.0 2.5 25 363 10.0 100 1450 1250 4.010 * *
* PIX Proprietary
Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
PIX - PERFORMER (Standards: EN 853 2SN, SAE 100 R2S-AT, ISO 1436)
Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards- SAE 100 R2S AT / EN 853 2SN / ISO 1436-2SN. Highly flexible Ligh weight. Easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE205-3 5 3/16 4.8 11.0 12.8 45.0 450 6525 180.0 1800 26100 90 0.310
PF 2205
PE206-4 6 1/4 6.4 12.7 14.9 40.0 400 5800 160.0 1600 23200 100 0.368
PF 2206
PE208-5 8 5/16 7.9 14.3 16.7 35.0 350 5000 140.0 1400 20000 115 0.431
PF 2208
PE210-6 10 3/8 9.5 16.7 19.1 33.0 330 4785 132.0 1320 19140 125 0.532
PF 2210
PE212-8 12 1/2 12.7 19.8 22.1 27.5 275 3988 110.0 1100 15950 180 0.629
PF 2212
PE216-10 16 5/8 15.9 23.0 25.3 25.0 250 3625 100.0 1000 14500 205 0.772
PF 2216
PE219-12 19 3/4 19.0 27.0 29.6 21.5 215 3118 86.0 860 12470 240 0.920
PF 2219
PE225-16 25 1 25.4 35.1 37.7 16.5 165 2393 66.0 660 9570 300 1.271
PF 2225
PE231-20 31 1-1/4 31.8 44.7 47.7 12.5 125 1813 50.0 500 7250 420 1.961
PF 2231
PE238-24 38 1-1/2 38.1 50.8 54.0 9.0 90 1305 36.0 360 5220 500 2.211
PF 2238
PE251-32 51 2 50.8 63.3 67.5 8.0 80 1160 32.0 320 4640 630 3.225
PF 2251
*PE263-40 63 2-1/2 63.5 75.0 80.0 7.0 70 1000 28.0 280 4000 760 3.710 * *
*PE276-48 76 3 76.2 88.0 93.0 5.5 55 798 22.0 220 3190 900 4.390 * *
*PE2102-64 102 4 101.6 113.0 118.0 4.0 40 580 16.0 160 2320 1250 5.300 * *
* PIX Proprietary
Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Working Temperature: - 40ºC to + 100ºC (Continuous). Intermittent Temperature: - 40ºC to + 120ºC (10% of total working hours)
For air application (Temp. max 70ºC) & pressure above 17 bar cover must be pin pricked. Special MSHA approved flame resistant outer cover can be provided on request.
Note: ** For "Recommended Ferrule" code details, please e-mail us at [email protected].
PIX - PERFORMER (Standards: SAE J517 100 R5R, Rubber Cover)
Special Features: Qualified for double (300,000) impulse cycles up to size 7/8" and (200,000) impulse cycles for 1-1/8" to relevant SAE 100R5 standard. Good flexibility. Thicker cover for very good abrasion resistance and weather protection.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE106R5R -5 6 1/4 6.4 12.3 14.8 21.0 210 3000 84.0 840 12000 85 0.240PF 11
06
PE108R5R -6 8 5/16 7.9 14.0 17.3 15.7 157 2277 62.8 628 9106 100 0.320PF 11
08
PE110R5R -8 10 13/32 10.3 16.0 19.4 14.0 140 2000 56.0 560 8000 115 0.360PF 11
10
PE112R5R -10 12 1/2 12.7 18.0 23.4 12.2 122 1769 48.8 488 7076 140 0.490PF 11
12
PE116R5R -12 16 5/8 15.9 22.0 27.4 10.5 105 1523 42.0 420 6090 165 0.630PF 11
16
PE122R5R -16 22 7/8 22.2 28.0 31.4 5.6 56 812 22.4 224 3248 185 0.690PF 11
22
PE128R5R -20 28 1-1/8 28.5 35.0 37.6 4.3 43 624 17.2 172 2494 230 0.810PF 11
28
Application: Medium pressure hydraulic application. Suitable for hydraulic oils, air, gasoline, crude oil & lubricating oils. Hydraulic power-pack return lines.
PIX - PERFORMER / T (Standards: EN 853 1ST, ISO 1436)
Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards-EN 853 1ST / ISO 1436-1ST. Thicker cover for very good abrasion resistance and weather protection. Highly flexible, light weight, easy
to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE106 -4 6 1/4 6.4 11.1 15.5 22.5 225 3263 90.0 900 13050 100 0.260PF 11
06
PE108 -5 8 5/16 7.9 12.7 17.1 21.5 215 3118 86.0 860 12470 115 0.305PF 11
08
PE110 -6 10 3/8 9.5 15.1 19.8 18.0 180 2610 72.0 720 10440 125 0.396PF 11
10
PE112 -8 12 1/2 12.7 18.3 22.6 16.0 160 2320 64.0 640 9280 180 0.475PF 11
12
PE116 -10 16 5/8 15.9 21.4 26.0 13.0 130 1885 52.0 520 7540 205 0.613PF 11
16
PE119 -12 19 3/4 19.0 25.4 29.8 10.5 105 1523 42.0 420 6090 240 0.783PF 11
19
PE125 -16 25 1 25.4 33.3 37.5 9.0 90 1305 36.0 360 5220 300 1.058PF 11
25
PE131 -20 31 1-1/4 31.8 40.5 45.5 6.3 63 914 25.0 250 3654 420 1.410PF 11
31
PE138 -24 38 1-1/2 38.1 46.8 52.4 5.0 50 725 20.0 200 2900 500 1.860PF 11
38
PE151 -32 51 2 50.8 60.2 66.3 4.0 40 580 16.0 160 2320 630 2.470PF 11
51
Application: Medium to high pressure hydraulic lines where self abrasion and inter substrate abrasion is foreseen. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
PERFORMER / T 100R2A (Standards: EN 853 2ST, ISO 1436)
Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards EN 853 2ST /ISO 1436 - 2ST. Thicker cover for very good abrasion resistance and weather protection. Highly flexible, light wight, easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Mini.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE206 -4 6 1/4 6.4 12.7 17.0 40.0 400 5800 160.0 1600 23200 100 0.445PF 12
06
PE208 -5 8 5/16 7.9 14.3 18.8 35.0 350 5000 140.0 1400 20000 115 0.518PF 12
08
PE210 -6 10 3/8 9.5 16.7 21.1 33.0 330 4785 132.0 1320 19140 125 0.626PF 12
10
PE212 -8 12 1/2 12.7 19.8 24.1 27.5 275 3988 110.0 1100 15950 180 0.732PF 12
12
PE216 -10 16 5/8 15.9 23.0 27.4 25.0 250 3625 100.0 1000 14500 205 0.876PF 12
16
PE219 -12 19 3/4 19.0 27.0 31.2 21.5 215 3118 86.0 860 12470 240 1.160PF 12
19
PE225 -16 25 1 25.4 35.1 39.0 16.5 165 2393 66.0 660 9570 300 1.377PF 12
25
PE231 -20 31 1-1/4 31.8 45.0 50.6 12.5 125 1813 50.0 500 7250 420 2.266PF 12
31
PE238 -24 38 1-1/2 38.1 50.8 57.2 9.0 90 1305 36.0 360 5220 500 2.604PF 12
38
PE251 -32 51 2 50.8 63.3 68.4 8.0 80 1160 32.0 320 4640 630 3.384PF 12
51
PE2102 -64 102 4 101.6 113.0 120.0 4.0 40 580 16.0 160 2320 1250 5.800 * *
Application: Medium to high pressure hydraulic lines where self abrasion and inter substrate abrasion is foreseen. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Working temperature: -40ºC To +100ºC (Continuous)Intermittent temperature: -40ºC to +120ºC (10% of total working hours)For air application (Temp. Max 70ºC) & pressure above 17 bar cover must be pin prickedSpecial MSHA approved flame resistant outer cover can be provided on request.
MPa bar psi MPa bar psi mm
PE106R5R -5 6 1/4 6.4 12.3 14.8 21.0 210 3000 84.0 840 12000 85 0.240PF 1106
PE108R5R -6 8 5/16 7.9 14.0 17.3 15.7 157 2277 62.8 628 9106 100 0.320PF 1108
PE110R5R -8 10 13/32 10.3 16.0 19.4 14.0 140 2000 56.0 560 8000 115 0.360PF 1110
PE112R5R -10 12 1/2 12.7 18.0 23.4 12.2 122 1769 48.8 488 7076 140 0.490PF 1112
PE116R5R -12 16 5/8 15.9 22.0 27.4 10.5 105 1523 42.0 420 6090 165 0.630PF 1116
PE122R5R -16 22 7/8 22.2 28.0 31.4 5.6 56 812 22.4 224 3248 185 0.690PF 1122
PE128R5R -20 28 1-1/8 28.5 35.0 37.6 4.3 43 624 17.2 172 2494 230 0.810PF 1128
Application: Medium pressure hydraulic application. Suitable for hydraulic oils, air, gasoline, crude oil & lubricating oils. Hydraulic power-pack return lines.
PIX - PERFORMER / T (Standards: EN 853 1ST, ISO 1436)
Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards-EN 853 1ST / ISO 1436-1ST. Thicker cover for very good abrasion resistance and weather protection. Highly flexible, light weight, easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE106 -4 6 1/4 6.4 11.1 15.5 22.5 225 3263 90.0 900 13050 100 0.260PF 11
06
PE108 -5 8 5/16 7.9 12.7 17.1 21.5 215 3118 86.0 860 12470 115 0.305PF 11
08
PE110 -6 10 3/8 9.5 15.1 19.8 18.0 180 2610 72.0 720 10440 125 0.396PF 11
10
PE112 -8 12 1/2 12.7 18.3 22.6 16.0 160 2320 64.0 640 9280 180 0.475PF 11
12
PE116 -10 16 5/8 15.9 21.4 26.0 13.0 130 1885 52.0 520 7540 205 0.613PF 11
16
PE119 -12 19 3/4 19.0 25.4 29.8 10.5 105 1523 42.0 420 6090 240 0.783PF 11
19
PE125 -16 25 1 25.4 33.3 37.5 9.0 90 1305 36.0 360 5220 300 1.058PF 11
25
PE131 -20 31 1-1/4 31.8 40.5 45.5 6.3 63 914 25.0 250 3654 420 1.410PF 11
31
PE138 -24 38 1-1/2 38.1 46.8 52.4 5.0 50 725 20.0 200 2900 500 1.860PF 11
38
PE151 -32 51 2 50.8 60.2 66.3 4.0 40 580 16.0 160 2320 630 2.470PF 11
51
Application: Medium to high pressure hydraulic lines where self abrasion and inter substrate abrasion is foreseen. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
PERFORMER / T 100R2A (Standards: EN 853 2ST, ISO 1436)
Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards EN 853 2ST /ISO 1436 - 2ST. Thicker cover for very good abrasion resistance and weather protection. Highly flexible, light wight, easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Mini.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE206 -4 6 1/4 6.4 12.7 17.0 40.0 400 5800 160.0 1600 23200 100 0.445PF 12
06
PE208 -5 8 5/16 7.9 14.3 18.8 35.0 350 5000 140.0 1400 20000 115 0.518PF 12
08
PE210 -6 10 3/8 9.5 16.7 21.1 33.0 330 4785 132.0 1320 19140 125 0.626PF 12
10
PE212 -8 12 1/2 12.7 19.8 24.1 27.5 275 3988 110.0 1100 15950 180 0.732PF 12
12
PE216 -10 16 5/8 15.9 23.0 27.4 25.0 250 3625 100.0 1000 14500 205 0.876PF 12
16
PE219 -12 19 3/4 19.0 27.0 31.2 21.5 215 3118 86.0 860 12470 240 1.160PF 12
19
PE225 -16 25 1 25.4 35.1 39.0 16.5 165 2393 66.0 660 9570 300 1.377PF 12
25
PE231 -20 31 1-1/4 31.8 45.0 50.6 12.5 125 1813 50.0 500 7250 420 2.266PF 12
31
PE238 -24 38 1-1/2 38.1 50.8 57.2 9.0 90 1305 36.0 360 5220 500 2.604PF 12
38
PE251 -32 51 2 50.8 63.3 68.4 8.0 80 1160 32.0 320 4640 630 3.384PF 12
51
PE2102 -64 102 4 101.6 113.0 120.0 4.0 40 580 16.0 160 2320 1250 5.800 * *
Application: Medium to high pressure hydraulic lines where self abrasion and inter substrate abrasion is foreseen. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Working temperature: -40ºC To +100ºC (Continuous)Intermittent temperature: -40ºC to +120ºC (10% of total working hours)For air application (Temp. Max 70ºC) & pressure above 17 bar cover must be pin prickedSpecial MSHA approved flame resistant outer cover can be provided on request.
PIX_Hydraulic_Hoses / PIX_Performer_Hoses
PIX Hydraulic Hose is useful for medium pressure service with high petroleum base hydraulic fluids, carrying hot oils, grease, lubricants, Crude oil, fuel oil and water. It is widely used for hydraulic fluid transmissions.
PIX also manufactures Compact Hose which is smaller in diameter with higher performance characteristic. It operates at smaller bend radius (approximately 25% to 30% smaller), its specialty is that the lining and cover thickness is less as compared to the normal hydraulic hose with same working pressure rating. It is light in weight & its compactness also offers the advantage to use in application having minimum space available.
PIX - PERFORMER (Standards: EN 853 1SN, SAE 100 R1S-AT, ISO 1436)
Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards- SAE 100 R1S AT / EN 853 1SN / ISO 1436-1SN. Highly flexible. Light weight. Easy to Handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min. Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE105 -3 5 3/16 4.8 9.5 11.5 25.0 250 3625 100.0 1000 14500 90 0.150 PF 22 05
PE106 -4 6 1/4 6.4 11.1 13.2 22.5 225 3263 90.0 900 13050 100 0.190PF 22
06
PE108 -5 8 5/16 7.9 12.7 15.0 21.5 215 3118 86.0 860 12470 115 0.234PF 22
08
PE110 -6 10 3/8 9.5 15.1 17.3 18.0 180 2610 72.0 720 10440 125 0.298PF 22
10
PE112 -8 12 1/2 12.7 18.3 20.6 16.0 160 2320 64.0 640 9280 180 0.384PF 22
12
PE116 -10 16 5/8 15.9 21.4 23.9 13.0 130 1885 52.0 520 7540 205 0.502PF 22
16
PE119 -12 19 3/4 19.0 25.4 27.6 10.5 105 1523 42.0 420 6090 240 0.649PF 22
19
PE125 -16 25 1 25.4 33.3 35.3 9.0 90 1305 36.0 360 5220 300 0.870PF 22
25
PE131 -20 31 1-1/4 31.8 40.5 43.2 6.3 63 914 25.2 252 3654 420 1.155PF 22
31
PE138 -24 38 1-1/2 38.1 46.8 50.7 5.0 50 725 20.0 200 2900 500 1.477PF 22
38
PE151 -32 51 2 50.8 60.2 64.2 4.0 40 580 16.0 160 2320 630 2.135PF 22
51
* PE163-40 63 2-1/2 63.5 73.0 78.0 5.0 50 725 20.0 200 2900 760 2.875 * *
* PE176-48 76 3 76.2 86.0 91.0 3.5 35 508 14.0 140 2030 900 3.320 * *
* PE1102-64 102 4 101.6 111.0 116.0 2.5 25 363 10.0 100 1450 1250 4.010 * *
* PIX Proprietary
Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
PIX - PERFORMER (Standards: EN 853 2SN, SAE 100 R2S-AT, ISO 1436)
Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards- SAE 100 R2S AT / EN 853 2SN / ISO 1436-2SN. Highly flexible Ligh weight. Easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE205-3 5 3/16 4.8 11.0 12.8 45.0 450 6525 180.0 1800 26100 90 0.310
PF 2205
PE206-4 6 1/4 6.4 12.7 14.9 40.0 400 5800 160.0 1600 23200 100 0.368
PF 2206
PE208-5 8 5/16 7.9 14.3 16.7 35.0 350 5000 140.0 1400 20000 115 0.431
PF 2208
PE210-6 10 3/8 9.5 16.7 19.1 33.0 330 4785 132.0 1320 19140 125 0.532
PF 2210
PE212-8 12 1/2 12.7 19.8 22.1 27.5 275 3988 110.0 1100 15950 180 0.629
PF 2212
PE216-10 16 5/8 15.9 23.0 25.3 25.0 250 3625 100.0 1000 14500 205 0.772
PF 2216
PE219-12 19 3/4 19.0 27.0 29.6 21.5 215 3118 86.0 860 12470 240 0.920
PF 2219
PE225-16 25 1 25.4 35.1 37.7 16.5 165 2393 66.0 660 9570 300 1.271
PF 2225
PE231-20 31 1-1/4 31.8 44.7 47.7 12.5 125 1813 50.0 500 7250 420 1.961
PF 2231
PE238-24 38 1-1/2 38.1 50.8 54.0 9.0 90 1305 36.0 360 5220 500 2.211
PF 2238
PE251-32 51 2 50.8 63.3 67.5 8.0 80 1160 32.0 320 4640 630 3.225
PF 2251
*PE263-40 63 2-1/2 63.5 75.0 80.0 7.0 70 1000 28.0 280 4000 760 3.710 * *
*PE276-48 76 3 76.2 88.0 93.0 5.5 55 798 22.0 220 3190 900 4.390 * *
*PE2102-64 102 4 101.6 113.0 118.0 4.0 40 580 16.0 160 2320 1250 5.300 * *
* PIX Proprietary
Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Working Temperature: - 40ºC to + 100ºC (Continuous). Intermittent Temperature: - 40ºC to + 120ºC (10% of total working hours)
For air application (Temp. max 70ºC) & pressure above 17 bar cover must be pin pricked. Special MSHA approved
flame resistant outer cover can be provided on request.
Note: ** For "Recommended Ferrule" code details, please e-mail us at [email protected].
PIX - PERFORMER (Standards: SAE J517 100 R5R, Rubber Cover)
Special Features: Qualified for double (300,000) impulse cycles up to size 7/8" and (200,000) impulse cycles for 1-1/8" to relevant SAE 100R5 standard. Good flexibility. Thicker cover for very good abrasion resistance and weather protection.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE106R5R -5 6 1/4 6.4 12.3 14.8 21.0 210 3000 84.0 840 12000 85 0.240PF 11
06
PE108R5R -6 8 5/16 7.9 14.0 17.3 15.7 157 2277 62.8 628 9106 100 0.320PF 11
08
PE110R5R -8 10 13/32 10.3 16.0 19.4 14.0 140 2000 56.0 560 8000 115 0.360PF 11
10
PE112R5R -10 12 1/2 12.7 18.0 23.4 12.2 122 1769 48.8 488 7076 140 0.490PF 11
12
PE116R5R -12 16 5/8 15.9 22.0 27.4 10.5 105 1523 42.0 420 6090 165 0.630PF 11
16
PE122R5R -16 22 7/8 22.2 28.0 31.4 5.6 56 812 22.4 224 3248 185 0.690PF 11
22
PE128R5R -20 28 1-1/8 28.5 35.0 37.6 4.3 43 624 17.2 172 2494 230 0.810PF 11
28
Application: Medium pressure hydraulic application. Suitable for hydraulic oils, air, gasoline, crude oil & lubricating oils. Hydraulic power-pack return lines.
PIX - PERFORMER / T (Standards: EN 853 1ST, ISO 1436)
Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards-EN 853 1ST / ISO 1436-1ST. Thicker cover for very good abrasion resistance and weather protection. Highly flexible, light weight, easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE106 -4 6 1/4 6.4 11.1 15.5 22.5 225 3263 90.0 900 13050 100 0.260PF 11
06
PE108 -5 8 5/16 7.9 12.7 17.1 21.5 215 3118 86.0 860 12470 115 0.305PF 11
08
PE110 -6 10 3/8 9.5 15.1 19.8 18.0 180 2610 72.0 720 10440 125 0.396PF 11
10
PE112 -8 12 1/2 12.7 18.3 22.6 16.0 160 2320 64.0 640 9280 180 0.475PF 11
12
PE116 -10 16 5/8 15.9 21.4 26.0 13.0 130 1885 52.0 520 7540 205 0.613PF 11
16
PE119 -12 19 3/4 19.0 25.4 29.8 10.5 105 1523 42.0 420 6090 240 0.783PF 11
19
PE125 -16 25 1 25.4 33.3 37.5 9.0 90 1305 36.0 360 5220 300 1.058PF 11
25
PE131 -20 31 1-1/4 31.8 40.5 45.5 6.3 63 914 25.0 250 3654 420 1.410PF 11
31
PE138 -24 38 1-1/2 38.1 46.8 52.4 5.0 50 725 20.0 200 2900 500 1.860PF 11
38
PE151 -32 51 2 50.8 60.2 66.3 4.0 40 580 16.0 160 2320 630 2.470PF 11
51
Application: Medium to high pressure hydraulic lines where self abrasion and inter substrate abrasion is foreseen. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
PERFORMER / T 100R2A (Standards: EN 853 2ST, ISO 1436)
Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards EN 853 2ST /ISO 1436 - 2ST. Thicker cover for very good abrasion resistance and weather protection. Highly flexible, light wight, easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Mini.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE206 -4 6 1/4 6.4 12.7 17.0 40.0 400 5800 160.0 1600 23200 100 0.445PF 12
06
PE208 -5 8 5/16 7.9 14.3 18.8 35.0 350 5000 140.0 1400 20000 115 0.518PF 12
08
PE210 -6 10 3/8 9.5 16.7 21.1 33.0 330 4785 132.0 1320 19140 125 0.626PF 12
10
PE212 -8 12 1/2 12.7 19.8 24.1 27.5 275 3988 110.0 1100 15950 180 0.732PF 12
12
PE216 -10 16 5/8 15.9 23.0 27.4 25.0 250 3625 100.0 1000 14500 205 0.876PF 12
16
PE219 -12 19 3/4 19.0 27.0 31.2 21.5 215 3118 86.0 860 12470 240 1.160PF 12
19
PE225 -16 25 1 25.4 35.1 39.0 16.5 165 2393 66.0 660 9570 300 1.377PF 12
25
PE231 -20 31 1-1/4 31.8 45.0 50.6 12.5 125 1813 50.0 500 7250 420 2.266PF 12
31
PE238 -24 38 1-1/2 38.1 50.8 57.2 9.0 90 1305 36.0 360 5220 500 2.604PF 12
38
PE251 -32 51 2 50.8 63.3 68.4 8.0 80 1160 32.0 320 4640 630 3.384PF 12
51
PE2102 -64 102 4 101.6 113.0 120.0 4.0 40 580 16.0 160 2320 1250 5.800 * *
Application: Medium to high pressure hydraulic lines where self abrasion and inter substrate abrasion is foreseen. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Working temperature: -40ºC To +100ºC (Continuous)Intermittent temperature: -40ºC to +120ºC (10% of total working hours)For air application (Temp. Max 70ºC) & pressure above 17 bar cover must be pin prickedSpecial MSHA approved flame resistant outer cover can be provided on request.
PIX_Hydraulic_Hoses / PIX_Performer_Hoses
PIX Hydraulic Hose is useful for medium pressure service with high petroleum base hydraulic fluids, carrying hot oils, grease, lubricants, Crude oil, fuel oil and water. It is widely used for hydraulic fluid transmissions.
PIX also manufactures Compact Hose which is smaller in diameter with higher performance characteristic. It operates at smaller bend radius (approximately 25% to 30% smaller), its specialty is that the lining and cover thickness is less as compared to the normal hydraulic hose with same working pressure rating. It is light in weight & its compactness also offers the advantage to use in application having minimum space available.
PIX - PERFORMER (Standards: EN 853 1SN, SAE 100 R1S-AT, ISO 1436)
Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards- SAE 100 R1S AT / EN 853 1SN / ISO 1436-1SN. Highly flexible. Light weight. Easy to Handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min. Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE105 -3 5 3/16 4.8 9.5 11.5 25.0 250 3625 100.0 1000 14500 90 0.150 PF 22 05
PE106 -4 6 1/4 6.4 11.1 13.2 22.5 225 3263 90.0 900 13050 100 0.190PF 22
06
PE108 -5 8 5/16 7.9 12.7 15.0 21.5 215 3118 86.0 860 12470 115 0.234PF 22
08
PE110 -6 10 3/8 9.5 15.1 17.3 18.0 180 2610 72.0 720 10440 125 0.298PF 22
10
PE112 -8 12 1/2 12.7 18.3 20.6 16.0 160 2320 64.0 640 9280 180 0.384PF 22
12
PE116 -10 16 5/8 15.9 21.4 23.9 13.0 130 1885 52.0 520 7540 205 0.502PF 22
16
PE119 -12 19 3/4 19.0 25.4 27.6 10.5 105 1523 42.0 420 6090 240 0.649PF 22
19
PE125 -16 25 1 25.4 33.3 35.3 9.0 90 1305 36.0 360 5220 300 0.870PF 22
25
PE131 -20 31 1-1/4 31.8 40.5 43.2 6.3 63 914 25.2 252 3654 420 1.155PF 22
31
PE138 -24 38 1-1/2 38.1 46.8 50.7 5.0 50 725 20.0 200 2900 500 1.477PF 22
38
PE151 -32 51 2 50.8 60.2 64.2 4.0 40 580 16.0 160 2320 630 2.135PF 22
51
* PE163-40 63 2-1/2 63.5 73.0 78.0 5.0 50 725 20.0 200 2900 760 2.875 * *
* PE176-48 76 3 76.2 86.0 91.0 3.5 35 508 14.0 140 2030 900 3.320 * *
* PE1102-64 102 4 101.6 111.0 116.0 2.5 25 363 10.0 100 1450 1250 4.010 * *
* PIX Proprietary
Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
PIX - PERFORMER (Standards: EN 853 2SN, SAE 100 R2S-AT, ISO 1436)
Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards- SAE 100 R2S AT / EN 853 2SN / ISO 1436-2SN. Highly flexible Ligh weight. Easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE205-3 5 3/16 4.8 11.0 12.8 45.0 450 6525 180.0 1800 26100 90 0.310
PF 2205
PE206-4 6 1/4 6.4 12.7 14.9 40.0 400 5800 160.0 1600 23200 100 0.368
PF 2206
PE208-5 8 5/16 7.9 14.3 16.7 35.0 350 5000 140.0 1400 20000 115 0.431
PF 2208
PE210-6 10 3/8 9.5 16.7 19.1 33.0 330 4785 132.0 1320 19140 125 0.532
PF 2210
PE212-8 12 1/2 12.7 19.8 22.1 27.5 275 3988 110.0 1100 15950 180 0.629
PF 2212
PE216-10 16 5/8 15.9 23.0 25.3 25.0 250 3625 100.0 1000 14500 205 0.772
PF 2216
PE219-12 19 3/4 19.0 27.0 29.6 21.5 215 3118 86.0 860 12470 240 0.920
PF 2219
PE225-16 25 1 25.4 35.1 37.7 16.5 165 2393 66.0 660 9570 300 1.271
PF 2225
PE231-20 31 1-1/4 31.8 44.7 47.7 12.5 125 1813 50.0 500 7250 420 1.961
PF 2231
PE238-24 38 1-1/2 38.1 50.8 54.0 9.0 90 1305 36.0 360 5220 500 2.211
PF 2238
PE251-32 51 2 50.8 63.3 67.5 8.0 80 1160 32.0 320 4640 630 3.225
PF 2251
*PE263-40 63 2-1/2 63.5 75.0 80.0 7.0 70 1000 28.0 280 4000 760 3.710 * *
*PE276-48 76 3 76.2 88.0 93.0 5.5 55 798 22.0 220 3190 900 4.390 * *
*PE2102-64 102 4 101.6 113.0 118.0 4.0 40 580 16.0 160 2320 1250 5.300 * *
* PIX Proprietary
Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Working Temperature: - 40ºC to + 100ºC (Continuous). Intermittent Temperature: - 40ºC to + 120ºC (10% of total working hours)
For air application (Temp. max 70ºC) & pressure above 17 bar cover must be pin pricked. Special MSHA approved
flame resistant outer cover can be provided on request.
Note: ** For "Recommended Ferrule" code details, please e-mail us at [email protected].
PIX - PERFORMER (Standards: SAE J517 100 R5R, Rubber Cover)
Special Features: Qualified for double (300,000) impulse cycles up to size 7/8" and (200,000) impulse cycles for 1-1/8" to relevant SAE 100R5 standard. Good flexibility. Thicker cover for very good abrasion resistance and weather protection.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE106R5R -5 6 1/4 6.4 12.3 14.8 21.0 210 3000 84.0 840 12000 85 0.240PF 11
06
PE108R5R -6 8 5/16 7.9 14.0 17.3 15.7 157 2277 62.8 628 9106 100 0.320PF 11
08
PE110R5R -8 10 13/32 10.3 16.0 19.4 14.0 140 2000 56.0 560 8000 115 0.360PF 11
10
PE112R5R -10 12 1/2 12.7 18.0 23.4 12.2 122 1769 48.8 488 7076 140 0.490PF 11
12
PE116R5R -12 16 5/8 15.9 22.0 27.4 10.5 105 1523 42.0 420 6090 165 0.630PF 11
16
PE122R5R -16 22 7/8 22.2 28.0 31.4 5.6 56 812 22.4 224 3248 185 0.690PF 11
22
PE128R5R -20 28 1-1/8 28.5 35.0 37.6 4.3 43 624 17.2 172 2494 230 0.810PF 11
28
Application: Medium pressure hydraulic application. Suitable for hydraulic oils, air, gasoline, crude oil & lubricating oils. Hydraulic power-pack return lines.
PIX - PERFORMER / T (Standards: EN 853 1ST, ISO 1436)
Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards-EN 853 1ST / ISO 1436-1ST. Thicker cover for very good abrasion resistance and weather protection. Highly flexible, light weight, easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE106 -4 6 1/4 6.4 11.1 15.5 22.5 225 3263 90.0 900 13050 100 0.260PF 11
06
PE108 -5 8 5/16 7.9 12.7 17.1 21.5 215 3118 86.0 860 12470 115 0.305PF 11
08
PE110 -6 10 3/8 9.5 15.1 19.8 18.0 180 2610 72.0 720 10440 125 0.396PF 11
10
PE112 -8 12 1/2 12.7 18.3 22.6 16.0 160 2320 64.0 640 9280 180 0.475PF 11
12
PE116 -10 16 5/8 15.9 21.4 26.0 13.0 130 1885 52.0 520 7540 205 0.613PF 11
16
PE119 -12 19 3/4 19.0 25.4 29.8 10.5 105 1523 42.0 420 6090 240 0.783PF 11
19
PE125 -16 25 1 25.4 33.3 37.5 9.0 90 1305 36.0 360 5220 300 1.058PF 11
25
PE131 -20 31 1-1/4 31.8 40.5 45.5 6.3 63 914 25.0 250 3654 420 1.410PF 11
31
PE138 -24 38 1-1/2 38.1 46.8 52.4 5.0 50 725 20.0 200 2900 500 1.860PF 11
38
PE151 -32 51 2 50.8 60.2 66.3 4.0 40 580 16.0 160 2320 630 2.470PF 11
51
Application: Medium to high pressure hydraulic lines where self abrasion and inter substrate abrasion is foreseen. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
PERFORMER / T 100R2A (Standards: EN 853 2ST, ISO 1436)
Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards EN 853 2ST /ISO 1436 - 2ST. Thicker cover for very good abrasion resistance and weather protection. Highly flexible, light wight, easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Mini.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE206 -4 6 1/4 6.4 12.7 17.0 40.0 400 5800 160.0 1600 23200 100 0.445PF 12
06
PE208 -5 8 5/16 7.9 14.3 18.8 35.0 350 5000 140.0 1400 20000 115 0.518PF 12
08
PE210 -6 10 3/8 9.5 16.7 21.1 33.0 330 4785 132.0 1320 19140 125 0.626PF 12
10
PE212 -8 12 1/2 12.7 19.8 24.1 27.5 275 3988 110.0 1100 15950 180 0.732PF 12
12
PE216 -10 16 5/8 15.9 23.0 27.4 25.0 250 3625 100.0 1000 14500 205 0.876PF 12
16
PE219 -12 19 3/4 19.0 27.0 31.2 21.5 215 3118 86.0 860 12470 240 1.160PF 12
19
PE225 -16 25 1 25.4 35.1 39.0 16.5 165 2393 66.0 660 9570 300 1.377PF 12
25
PE231 -20 31 1-1/4 31.8 45.0 50.6 12.5 125 1813 50.0 500 7250 420 2.266PF 12
31
PE238 -24 38 1-1/2 38.1 50.8 57.2 9.0 90 1305 36.0 360 5220 500 2.604PF 12
38
PE251 -32 51 2 50.8 63.3 68.4 8.0 80 1160 32.0 320 4640 630 3.384PF 12
51
PE2102 -64 102 4 101.6 113.0 120.0 4.0 40 580 16.0 160 2320 1250 5.800 * *
Application: Medium to high pressure hydraulic lines where self abrasion and inter substrate abrasion is foreseen. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Working temperature: -40ºC To +100ºC (Continuous)Intermittent temperature: -40ºC to +120ºC (10% of total working hours)For air application (Temp. Max 70ºC) & pressure above 17 bar cover must be pin prickedSpecial MSHA approved flame resistant outer cover can be provided on request.
PIX_Hydraulic_Hoses / PIX_Performer_Hoses
PIX Hydraulic Hose is useful for medium pressure service with high petroleum base hydraulic fluids, carrying hot oils, grease, lubricants, Crude oil, fuel oil and water. It is widely used for hydraulic fluid transmissions.
PIX also manufactures Compact Hose which is smaller in diameter with higher performance characteristic. It operates at smaller bend radius (approximately 25% to 30% smaller), its specialty is that the lining and cover thickness is less as compared to the normal hydraulic hose with same working pressure rating. It is light in weight & its compactness also offers the advantage to use in application having minimum space available.
PIX - PERFORMER (Standards: EN 853 1SN, SAE 100 R1S-AT, ISO 1436)
Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards- SAE 100 R1S AT / EN 853 1SN / ISO 1436-1SN. Highly flexible. Light weight. Easy to Handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min. Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE105 -3 5 3/16 4.8 9.5 11.5 25.0 250 3625 100.0 1000 14500 90 0.150 PF 22 05
PE106 -4 6 1/4 6.4 11.1 13.2 22.5 225 3263 90.0 900 13050 100 0.190PF 22
06
PE108 -5 8 5/16 7.9 12.7 15.0 21.5 215 3118 86.0 860 12470 115 0.234PF 22
08
PE110 -6 10 3/8 9.5 15.1 17.3 18.0 180 2610 72.0 720 10440 125 0.298PF 22
10
PE112 -8 12 1/2 12.7 18.3 20.6 16.0 160 2320 64.0 640 9280 180 0.384PF 22
12
PE116 -10 16 5/8 15.9 21.4 23.9 13.0 130 1885 52.0 520 7540 205 0.502PF 22
16
PE119 -12 19 3/4 19.0 25.4 27.6 10.5 105 1523 42.0 420 6090 240 0.649PF 22
19
PE125 -16 25 1 25.4 33.3 35.3 9.0 90 1305 36.0 360 5220 300 0.870PF 22
25
PE131 -20 31 1-1/4 31.8 40.5 43.2 6.3 63 914 25.2 252 3654 420 1.155PF 22
31
PE138 -24 38 1-1/2 38.1 46.8 50.7 5.0 50 725 20.0 200 2900 500 1.477PF 22
38
PE151 -32 51 2 50.8 60.2 64.2 4.0 40 580 16.0 160 2320 630 2.135PF 22
51
* PE163-40 63 2-1/2 63.5 73.0 78.0 5.0 50 725 20.0 200 2900 760 2.875 * *
* PE176-48 76 3 76.2 86.0 91.0 3.5 35 508 14.0 140 2030 900 3.320 * *
* PE1102-64 102 4 101.6 111.0 116.0 2.5 25 363 10.0 100 1450 1250 4.010 * *
* PIX Proprietary
Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
PIX - PERFORMER (Standards: EN 853 2SN, SAE 100 R2S-AT, ISO 1436)
Special Features:
Qualified for double impulse cycles (400,000 cycles) to relevant standards- SAE 100 R2S AT / EN 853 2SN / ISO 1436-2SN. Highly flexible Ligh weight. Easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE205-3 5 3/16 4.8 11.0 12.8 45.0 450 6525 180.0 1800 26100 90 0.310
PF 2205
PE206-4 6 1/4 6.4 12.7 14.9 40.0 400 5800 160.0 1600 23200 100 0.368
PF 2206
PE208-5 8 5/16 7.9 14.3 16.7 35.0 350 5000 140.0 1400 20000 115 0.431
PF 2208
PE210-6 10 3/8 9.5 16.7 19.1 33.0 330 4785 132.0 1320 19140 125 0.532
PF 2210
PE212-8 12 1/2 12.7 19.8 22.1 27.5 275 3988 110.0 1100 15950 180 0.629
PF 2212
PE216-10 16 5/8 15.9 23.0 25.3 25.0 250 3625 100.0 1000 14500 205 0.772
PF 2216
PE219-12 19 3/4 19.0 27.0 29.6 21.5 215 3118 86.0 860 12470 240 0.920
PF 2219
PE225-16 25 1 25.4 35.1 37.7 16.5 165 2393 66.0 660 9570 300 1.271
PF 2225
PE231-20 31 1-1/4 31.8 44.7 47.7 12.5 125 1813 50.0 500 7250 420 1.961
PF 2231
PE238-24 38 1-1/2 38.1 50.8 54.0 9.0 90 1305 36.0 360 5220 500 2.211
PF 2238
PE251-32 51 2 50.8 63.3 67.5 8.0 80 1160 32.0 320 4640 630 3.225
PF 2251
*PE263-40 63 2-1/2 63.5 75.0 80.0 7.0 70 1000 28.0 280 4000 760 3.710 * *
*PE276-48 76 3 76.2 88.0 93.0 5.5 55 798 22.0 220 3190 900 4.390 * *
*PE2102-64 102 4 101.6 113.0 118.0 4.0 40 580 16.0 160 2320 1250 5.300 * *
* PIX Proprietary
Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Working Temperature: - 40ºC to + 100ºC (Continuous). Intermittent Temperature: - 40ºC to + 120ºC (10% of total working hours)
For air application (Temp. max 70ºC) & pressure above 17 bar cover must be pin pricked. Special MSHA approved flame resistant outer cover can be provided on request.
Note: ** For "Recommended Ferrule" code details, please e-mail us at [email protected].
PIX - PERFORMER (Standards: SAE J517 100 R5R, Rubber Cover)
Special Features: Qualified for double (300,000) impulse cycles up to size 7/8" and (200,000) impulse cycles for 1-1/8" to relevant SAE 100R5 standard. Good flexibility. Thicker cover for very good abrasion resistance and weather protection.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE106R5R -5 6 1/4 6.4 12.3 14.8 21.0 210 3000 84.0 840 12000 85 0.240PF 11
06
PE108R5R -6 8 5/16 7.9 14.0 17.3 15.7 157 2277 62.8 628 9106 100 0.320PF 11
08
PE110R5R -8 10 13/32 10.3 16.0 19.4 14.0 140 2000 56.0 560 8000 115 0.360PF 11
10
PE112R5R -10 12 1/2 12.7 18.0 23.4 12.2 122 1769 48.8 488 7076 140 0.490PF 11
12
PE116R5R -12 16 5/8 15.9 22.0 27.4 10.5 105 1523 42.0 420 6090 165 0.630PF 11
16
PE122R5R -16 22 7/8 22.2 28.0 31.4 5.6 56 812 22.4 224 3248 185 0.690PF 11
22
PE128R5R -20 28 1-1/8 28.5 35.0 37.6 4.3 43 624 17.2 172 2494 230 0.810PF 11
28
Application: Medium pressure hydraulic application. Suitable for hydraulic oils, air, gasoline, crude oil & lubricating oils. Hydraulic power-pack return lines.
PIX - PERFORMER / T (Standards: EN 853 1ST, ISO 1436)
Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards-EN 853 1ST / ISO 1436-1ST. Thicker cover for very good abrasion resistance and weather protection. Highly flexible, light weight, easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Min.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE106 -4 6 1/4 6.4 11.1 15.5 22.5 225 3263 90.0 900 13050 100 0.260PF 11
06
PE108 -5 8 5/16 7.9 12.7 17.1 21.5 215 3118 86.0 860 12470 115 0.305PF 11
08
PE110 -6 10 3/8 9.5 15.1 19.8 18.0 180 2610 72.0 720 10440 125 0.396PF 11
10
PE112 -8 12 1/2 12.7 18.3 22.6 16.0 160 2320 64.0 640 9280 180 0.475PF 11
12
PE116 -10 16 5/8 15.9 21.4 26.0 13.0 130 1885 52.0 520 7540 205 0.613PF 11
16
PE119 -12 19 3/4 19.0 25.4 29.8 10.5 105 1523 42.0 420 6090 240 0.783PF 11
19
PE125 -16 25 1 25.4 33.3 37.5 9.0 90 1305 36.0 360 5220 300 1.058PF 11
25
PE131 -20 31 1-1/4 31.8 40.5 45.5 6.3 63 914 25.0 250 3654 420 1.410PF 11
31
PE138 -24 38 1-1/2 38.1 46.8 52.4 5.0 50 725 20.0 200 2900 500 1.860PF 11
38
PE151 -32 51 2 50.8 60.2 66.3 4.0 40 580 16.0 160 2320 630 2.470PF 11
51
Application: Medium to high pressure hydraulic lines where self abrasion and inter substrate abrasion is foreseen. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
PERFORMER / T 100R2A (Standards: EN 853 2ST, ISO 1436)
Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards EN 853 2ST /ISO 1436 - 2ST. Thicker cover for very good abrasion resistance and weather protection. Highly flexible, light wight, easy to handle and route.
Product Range:
ProductCode
Dash DNHose
ID(inch)
Hose ID
(mm)
Braid OD
(mm)
Hose OD
(mm)
Maximum WorkingPressure
Minimum BurstPressure
Mini.Bend
RadiusWeightMeter
Kgs/mtr
Recom.Ferrule
MPa bar psi MPa bar psi mm
PE206 -4 6 1/4 6.4 12.7 17.0 40.0 400 5800 160.0 1600 23200 100 0.445PF 12
06
PE208 -5 8 5/16 7.9 14.3 18.8 35.0 350 5000 140.0 1400 20000 115 0.518PF 12
08
PE210 -6 10 3/8 9.5 16.7 21.1 33.0 330 4785 132.0 1320 19140 125 0.626PF 12
10
PE212 -8 12 1/2 12.7 19.8 24.1 27.5 275 3988 110.0 1100 15950 180 0.732PF 12
12
PE216 -10 16 5/8 15.9 23.0 27.4 25.0 250 3625 100.0 1000 14500 205 0.876PF 12
16
PE219 -12 19 3/4 19.0 27.0 31.2 21.5 215 3118 86.0 860 12470 240 1.160PF 12
19
PE225 -16 25 1 25.4 35.1 39.0 16.5 165 2393 66.0 660 9570 300 1.377PF 12
25
PE231 -20 31 1-1/4 31.8 45.0 50.6 12.5 125 1813 50.0 500 7250 420 2.266PF 12
31
PE238 -24 38 1-1/2 38.1 50.8 57.2 9.0 90 1305 36.0 360 5220 500 2.604PF 12
38
PE251 -32 51 2 50.8 63.3 68.4 8.0 80 1160 32.0 320 4640 630 3.384PF 12
51
PE2102 -64 102 4 101.6 113.0 120.0 4.0 40 580 16.0 160 2320 1250 5.800 * *
Application: Medium to high pressure hydraulic lines where self abrasion and inter substrate abrasion is foreseen. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Working temperature: -40ºC To +100ºC (Continuous)Intermittent temperature: -40ºC to +120ºC (10% of total working hours)For air application (Temp. Max 70ºC) & pressure above 17 bar cover must be pin prickedSpecial MSHA approved flame resistant outer cover can be provided on request.