●

820 880 944 1000 1010 1100 1258120 130 140 150 160 161 175

Progressing Cavity Pumping Systems

weatherford.com© 2011 Weatherford. All rights reserved

Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted otherwise, trademarks and service marks herein are the property of Weatherford. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set forth in the applicable contract between Weatherford and the client.

278 SLIM

238 STD238 SLIM

278 STD278 LRG312 STD

FATBOY

Tubing Size

412 STD

● ● ● ●

m³/day/100rpm

● ● ● ● ●

● ● ● ●

●

● ●

bbl/day/100rpm

238 SLIM • 2-3/8 in. Tubing• 2-1/4 in. Stator Tube OD• 4-1/2 in. Casing• 2-7/8 in. Insertable

238 STD • 2-3/8 Tubing• 3 in. Stator Tube OD• 4-1/2 in. Casing• 3-1/2 in. Insertable

238 LRG • 2-3/8 in. Tubing• 3-1/2 in. Stator Tube OD• 4-1/2 in. Casing• 4-1/2 in. Insertable

278 SLIM • 2-7/8 in. Tubing• 3-1/2 in. Stator Tube OD• 4-1/2 in. Casing• 4-1/2 in. Insertable

278 STD • 2-7/8 in. Tubing• 3-3/4 in. Stator Tube OD• 5-1/2 in. Casing• 4-1/2 in. Insertable

278 LRG •2-7/8 in. Tubing•4 in. to 4-1/2 in. Stator Tube OD•5-1/2 in. Casing•5-1/2 in. Insertable

312 STD • 3-1/2 in. Tubing• 4-1/2 in. to 5 in Stator Tube OD• 5-1/2 in. to 7 in. Casing• 5-1/2 in. Insertable

412 STD• 4-1/2 in. Tubing• 5-1/2 in. to 6 in. Stator Tube OD• 7 in. to 7-5/8 in. Casing

FATBOY • Maximum flow area• Short pitch• Sandy heavy oil

Rotor and Stator OD may vary depending on connections and configurations required

238 LRG ● ●

Available Model Displacement

Model Families

Coil Accessibility2-7/8 2-7/8 2-7/8 2-7/8 3-1/2 3-1/2 3-1/2 3-1/2 2-7/8 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 4-1/2 4-1/23-1/2 3-1/2 4-1/2 3-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/24-1/2 4-1/24-1/2 4-1/2 5-1/2 4-1/24-1/2 5-1/2 5-1/24-1/22-7/8 2-7/83-1/2 4-1/2 3-1/23-1/24-1/2 4-1/22-7/8

Coil Accessibility• 3/4 in. coil tubing• Minimum tubing size

1 4 4 6 7 8 10 10 10 11 13 14 15 15 16 17 18 22 23 27 28 30 32 35 42 47 50 52 56 60 64 70 80 83 88 95 98 105 106 1136 24 25 38 45 50 60 60 60 69 82 88 95 95 100 110 113 140 145 170 175 189 200 220 265 296 310 327 350 377 400 440 500 520 550 600 615 660 667 710

200 20512901100 125810101000954880820750

3-1/2

Coil accessibility based on 2-3/8 in. EUE 4.70 lb/ft, 2-7/8 in. EUE 6.50 lb/ft, 3- 1/2 in. EUE 9.30 lb/ft, 4-1/2 in. EUE 12.75 lb/ft, 5-1/2 in. LTC 17.00 lb/ft production tubing ID, nominal 0.750 in. OD coiled tubing, nominal rotor drift, and minimum 0.06 in. clearance to directly above the stator elastomer.