Download - Part Design V5R8 Update
-
8/11/2019 Part Design V5R8 Update
1/19
Copyright DASSAULT SYSTEMES 2002 1
Part Design V5R8Update
CATIA Training Foils
Version 5 Release 8January 2002
EDU-CAT-E-PDG-UF-V5R8
-
8/11/2019 Part Design V5R8 Update
2/19
Copyright DASSAULT SYSTEMES 2002 2
Table of Contents
1. Sketch Based Features p.3Multi-length Pad p.4
Multi-length Pocket p.7
2. Dress up Features p.10Extracting Geometry p.11Shell Update p.13
3. Part Management p.15Change Boolean Type p.16
-
8/11/2019 Part Design V5R8 Update
3/19
Copyright DASSAULT SYSTEMES 2002 3
Sketch Based Features
You w il l see wh at is new and has been enhanced in CA TIA V5R8 for Pad and
Pocke t in the Par t Des ign Workbench
Multi-length PadMulti-length Pocket
-
8/11/2019 Part Design V5R8 Update
4/19
Copyright DASSAULT SYSTEMES 2002 4
Multi-length Pad (1/3) You can extrude multiple profiles belonging to a same sketchusing different length values. The multi-pad capability lets youdo this at one time.
V5R8
Select the Multi-lengthpad icon
The Pad Definition dialogbox is displayed. You cansee the number of domainsto be extruded.
1
2 Select the Sketch.Note that all profilesmust be closed andmust not intersect.
3
-
8/11/2019 Part Design V5R8 Update
5/19Copyright DASSAULT SYSTEMES 2002 5
Multi-length Pad (2/3) You can extrude multiple profiles belonging to a same sketch using different length values.The multi-pad capability lets you do this at one time.
V5R8
A red arrow is displayed normal tothe sketch. It indicates the proposedextrusion direction. To reverse it,you just need to click it.
45 Select a Domain in the list. This one now
appears in blue in the geometry area.
-
8/11/2019 Part Design V5R8 Update
6/19Copyright DASSAULT SYSTEMES 2002 6
Multi-length Pad (3/3) You can extrude multiple profiles belonging to a same sketch using different length values. The multi-pad capability lets you do this at one time.
V5R8
Specify the length by entering a value.For example, enter 20mm. Repeat theoperation for each extrusion domain.
67
Click OK to create the Multi-heightPad.
Note that you can multiselectextrusion domain from thelist before defining a
common length or thickness.
-
8/11/2019 Part Design V5R8 Update
7/19Copyright DASSAULT SYSTEMES 2002 7
Multi-length Pocket (1/3) You can extrude multiple profiles belonging to a same sketch using different length values. Themulti-pocket capability lets you do this at one time.
V5R8
Select the Multi-lengthpad icon
The Pocket Definitiondialog box is displayed. Youcan see the number ofdomains to be extruded.
1
2 Select the Sketch.Note that all profilesmust be closed andmust not intersect.
3
Note that a red arrow is displayednormal to the sketch. It indicates theproposed extrusion direction. Toreverse it, you just need to click it.
-
8/11/2019 Part Design V5R8 Update
8/19Copyright DASSAULT SYSTEMES 2002 8
Multi-length Pocket (2/3) You can extrude multiple profiles belonging to a same sketch using different length values. Themulti-pocket capability lets you do this at one time.
V5R8
4
5
Select a Domain in the list. This one nowappears in blue in the geometry area.
Specify the length by entering a value.
For example, enter 10mm. Repeat theoperation for each extrusion domain.
Note that you can multiselectextrusion domain from thelist before defining acommon length or thickness.
-
8/11/2019 Part Design V5R8 Update
9/19
-
8/11/2019 Part Design V5R8 Update
10/19Copyright DASSAULT SYSTEMES 2002 10
Dress up Features
You w il l see w hat is new and h as been enhanc ed in CATIA V5R8 for Draft in
the Par t Des ign Workb ench
Extracting geometry
Shell Update
-
8/11/2019 Part Design V5R8 Update
11/19Copyright DASSAULT SYSTEMES 2002 11
Extracting Geometry (1/2)The Extract capability lets you generate separate elements from initial geometry, without deletinggeometry. This operation may be especially useful to solve difficulties when drafting for example.
Use the Draft command to draft thepad with 10 as angle value forexample.
1
2 Once done, the application informsyou that the operation cannot beproperly achieved.
Click OK to close the error message3
-
8/11/2019 Part Design V5R8 Update
12/19Copyright DASSAULT SYSTEMES 2002 12
Extracting Geometry (2/2)
A new dialog box displays providing you with asolution. You can deactivate the draft and extract itsgeometry. To do so, click Yes.
The Extract capability lets you generate separate elements from initial geometry, without deletinggeometry. This operation may be especially useful to solve difficulties when drafting for example.
4 5 Draft.1 appears as deactivated in the specificationtree. A node "Extracted Geometry" is displayed inthe tree too. This category includes the elementscreated by the application, namely five surfaces.
You can now use Generative ShapeDesign capabilities to complete thedraft.
V5R8
V5R8
-
8/11/2019 Part Design V5R8 Update
13/19Copyright DASSAULT SYSTEMES 2002 13
Shell Update (1/2)After a sketch modification, a text is displayed about the previousface.
Enter the Sketcher to replace the circular edge ofthe initial sketch with a line, then return to PartDesign.
1
2Then, close the Update Diagnosis dialog box.
-
8/11/2019 Part Design V5R8 Update
14/19Copyright DASSAULT SYSTEMES 2002 14
Shell Update (2/2)After a sketch modification, a text is displayed about the previous face.
Double-click on Shell.1 in the Specification Tree. The FeatureDefinition Error window displays, prompting you to changespecifications. Moreover, the old face you have just deleted isnow displayed in yellow. Click OK to close the window. The ShellDefinition dialog box appears.
3V5R8
Note that the text "Removed Face" is displayed close to the face,thus giving you a better indication of the face that has beenremoved.
4 Click the Faces to remove field if not already done and selectthe replacing face. Click OK to close the Shell Definition dialogbox and obtain a correct part. The shell feature is rebuilt.
-
8/11/2019 Part Design V5R8 Update
15/19
Copyright DASSAULT SYSTEMES 2002 15
Part Management
You w i l l see what i s new and has b een enhanced in CATIA V5R8 for
Managing B odies in the Par t Des ign Wo rkbench
Change Boolean Type
-
8/11/2019 Part Design V5R8 Update
16/19
Copyright DASSAULT SYSTEMES 2002 16
Change Boolean Type (1/4)The initial part is composed of three
bodies. Assemble Body.1 to PartBody.
1
Remove Body.2 from Assemble.1.You obtainRemove.1.
2
V5R8
V5R8
-
8/11/2019 Part Design V5R8 Update
17/19
Copyright DASSAULT SYSTEMES 2002 17
Change Boolean Type (2/4)
Click with the right button mouse onRemove.1. In the contextual menu,select Remove.1 object
3
V5R8
Choose now the new operation. Forexample, click on Change ToAssemble .
4
-
8/11/2019 Part Design V5R8 Update
18/19
Copyright DASSAULT SYSTEMES 2002 18
Change Boolean Type (3/4)
You obtain :5
V5R8
Change now Assemble.2 to UnionTrim. You obtain :
6
-
8/11/2019 Part Design V5R8 Update
19/19
Copyright DASSAULT SYSTEMES 2002 19
Change Boolean Type (4/4)
You can edit Trim.1 . For instance,select the cylinder's top face as the
face to keep. You obtain :
7
V5R8