![Page 1: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/1.jpg)
Operations and Supply Chain Management
MGMT 3306
Lecture 01
Instructor: Dr. Yan Qin
![Page 2: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/2.jpg)
Outline – Week 1
Course overview
◦Topics to be covered
◦Assessment items
Operations and Supply Chain Management (O&SCM)
◦What is OSCM
◦Services Vs. Goods
◦Efficiency Vs. Effectiveness
◦Productivity Measurement
◦Operations Strategies
![Page 3: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/3.jpg)
Topics to cover in this course
Global Operations Strategy
Project Management
Quality Management
Statistical Process Control
Demand Management and Forecasting
Inventory Management
Location Strategy
Decision Making Tools
![Page 4: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/4.jpg)
Grading scale
Your letter grade is determined using the grade distribution that follows. You can calculate your percentage grade at any time in the semester by dividing the points you have accrued by the total points available up to that point. This percentage is then matched to a letter grade.
A 90% or higher
B 80 to 89%
C 70 to 79%
D 60 to 69%
F Less than 60%
![Page 5: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/5.jpg)
Course Assessment
Grade breakdown
◦ Class Participation 10%
◦ Individual Assignments 20%
◦ Two Exams 70%
* Please refer to the tentative class schedule for the post and due dates of each individual assignments.
![Page 6: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/6.jpg)
Class participation
Class discussion will be held on the Forum (used to be called Discussion Board in Vista 8) in the Learn 9 system. A set of 2-4 new questions will be posted each week with their end dates stated. For each set of questions, you are expected to answer at least one of the initial questions and reply to at least one of your classmates responses for full credit.
Detailed netiquette rules you are expected to follow are available on the Discussion Forum of Week 1.
![Page 7: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/7.jpg)
Assignments and Exams
Individual Assignments
◦ There are 4 individual assignments in total. Each assignment consists of problem-solving questions and essay questions about the topics covered in class. Each assignment accounts for 5% of the final grade.
Two Exams
◦ There will be two non-cumulative exams in total. Each accounts for 35% of the final grade. The exams will be individual, timed, and open-book/notes. Only multiple-choice questions will be given on the exams.
![Page 8: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/8.jpg)
Contact information
Course Website: https://www.uhv.edu/elearning/login.aspx
Email: [email protected] or via “Messages” function in Learn 9
My Office: Room 338, Brazos Hall, UHSSL
Office Hours: 4:00 pm – 5:00 pm on Tuesdays or by appointment (You can either drop by my office in Brazos Hall or meet me online at: https://meetonline.uhv.edu/su15oscm/)
Office Phone number: 832-842-2958
For technical questions about Learn 9, please email our online support technicians at [email protected] .
![Page 9: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/9.jpg)
What is OSCM
Operations include all the activities that relate to the creation of good and services through the transformation of inputs to outputs.
Operations Management (OM) refers to the management of Operations activities to ensure the efficient utilization of all kinds of resources in meeting customer expectations.
Supply Chain Management (SCM) deals with the management of materials, information, and financial flows in a network consisting of suppliers, manufacturers, distributors, and customers.
![Page 10: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/10.jpg)
Example: OSCM Activities in a Commercial Bank
Commercial Bank
Operations:Teller schedulingCheck ClearingCollectionTransaction ProcessingFacility Layout/designVault OperationsMaintenanceSecurity
Finance:InvestmentSecuritiesReal estate
Marketing:Loans Commercial Industrial Financial Personal MortgageAccountin
g
Auditing Trust Department
10
![Page 11: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/11.jpg)
Example: OSCM Activities in a Manufacturing Organization
Manufacturing
Operations:Facilities Construction; MaintenanceProduction and Inventory ControlQuality assurance and controlSupply Chain ManagementProduct DesignIndustrial Engineering Efficient use of machine, spaceProcess analysis
Finance:Disbursements/credits Accounts receivable Accounts payableFunds ManagementCapital requirements Stock issue Bond issue and recall
Marketing:Sales promotionAdvertisingSalesMarket research
11
![Page 12: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/12.jpg)
OM’s Transformation Role
12
Inputs are transformed into Goods and Services via OSCM activities.
![Page 13: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/13.jpg)
Differences between Services and GoodsAttributes of Goods Attributes of Services
Tangible product Intangible product
Product can be resold. Reselling a service is unusual.
Product can be inventoried.
Many services cannot be inventoried.
Some aspects of quality are measurable.
Many aspects of quality are difficult to measure.
Selling is distinct from production.
Selling is often a part of the service.
Product is transportable.
Provider, not product, is often transportable.
Site of facility is important for cost.
Site of facility is important for customer contact.
Often easy to automate.
Service is often difficult to automate.
![Page 14: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/14.jpg)
Goods – Services Continuum
In reality, almost all services and goods are a mixture of a service and a tangible product.
![Page 15: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/15.jpg)
“We need to have things done efficiently and effectively!” said your supervisor one day. But what does this mean?
![Page 16: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/16.jpg)
Efficient Vs. Effective Operations
◦Efficiency: Doing something at the lowest possible cost.
◦Effectiveness: Doing the right things to create the most value for the company.
Now you know that 4 situations can happen to you:
Efficient but Ineffective
Inefficient but
Effective
Efficient and Effective
Inefficient and
Ineffective
![Page 17: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/17.jpg)
Efficient Vs. Effective Operations
From: http://optimaltraining.typepad.com/blog/effectiveness/
![Page 18: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/18.jpg)
The 10 major OM decisions
Ten Decision Areas Sample Issues
Design of goods and services
What good or service should we offer?
Managing quality How do we define the quality?
Process and capacity What process and what capacity will these products require?
Location strategy Where should we put the facilities?
Layout strategy How should we arrange the facilities?
Human resources and job design
How do we provide a reasonable work environment?
Supply chain management
Should we make or buy this component?
Inventory, material requirements planning, and JIT
How much inventory of item should we have? When do we reorder?
Intermediate and short-term scheduling
Are we better off keeping people on the payroll during slowdowns?
Maintenance Who is responsible for maintenance?
18
![Page 19: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/19.jpg)
Productivity Measures
Productivity is a measure of efficiency.
It shows how well a country, industry, or business unit is using its resources (or factors of production).
Formula:
Productivity = outputs / inputs
![Page 20: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/20.jpg)
Three types of productivity measures
There are three types of productivity measures:
◦ Partial: Exactly one input is considered in measuring productivity
◦ Multifactor: More than one input but not all inputs are included when measuring productivity.
◦ Total: All the inputs are included when measuring productivity.
Note that when one than one input is used to calculate productivity, the inputs should be measured by the same unit. (More details will be provided in the following.)
![Page 21: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/21.jpg)
Example: Partial measures
According to the 2006 edition of the Harbour Report on North American auto-factory productivity
GM : 33.19 labor hrs to build 1 vehicle
Honda: 41 minutes less than GM
Nissan: 500 autos with 14,230 labor hrs
Question 1: If GM’s labor productivity in year 2007 was .029 vehicles/ hr, what was GM’s change in labor productivity?
Question 2: How many hours did it take to build a vehicle at GM in year 2007?
![Page 22: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/22.jpg)
Example: Question 1
Answer:
GM’s labor productivity in year 2006 = output / input
= 1/ 33.19
= 0.03 vehicles/hr
GM’s labor productivity in year 2007 = 0.029 (given)
Change in labor productivity = 0.029 -0.03
= - 0.001
![Page 23: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/23.jpg)
Example: Question 2
Answer: GM’s labor productivity in year 2007 =
0.029 vehicle/hr (given)
The number of labor hours it took to
produce a vehicle in year 2007 = vehiclehrshrvehicle
/48.34/029.0
1
![Page 24: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/24.jpg)
Example: Multi-factor measures
Suppose an automaker shows the following results:
◦ Output : 500,000 vehicles
◦ Labor = 29.4 hrs/ vehicle at $47/hr
◦ O/H Charge = $327 per Labor hour
◦ Material Cost = $6.5 Billion
Please calculate the multifactor productivity for labor and material together.
![Page 25: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/25.jpg)
Example: Solution - 1
Using the formula for productivity, Multifactor productivity for labor and material
= Output / (Labor cost + Material cost)
(1) Note that in this case we should use labor cost, instead of labor hour, since materials are measured by dollar. Inputs should be measured by the same unit.
(2) The unit of Output can be different from the unit of Input. For example, the output in this example is the number of vehicles produced and the input is the total amount of money put in labor and material.
![Page 26: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/26.jpg)
Example: Solution - 2
The total material cost is $6.5 billion as given. We now need to calculate the total labor cost: Labor = 29.4 hrs per vehicle at $47/hour (given)
Labor cost per vehicle = 29.4 hrs/vehicle * $47/hr
= $1384.8 per vehicle
Output = 500,000 vehicles
Therefore, the total labor cost incurred to produce the 500,000 vehicles = $1384.8 per vehicle * 500,000 vehicles
= $ 0.6909 billion
![Page 27: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/27.jpg)
Example: Solution - 3
Multifactor productivity for labor and material
= Output / (Labor cost + material cost)
= 500,000 vehicles / ($0.6909 billion + $6.5 billion)
= 500,000 vehicles / $7.1909 billion
= 0.000695 vehicle per dollar
![Page 28: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/28.jpg)
Example: Total productivity
Company A received the data below for its rodent cage production unit. Please find the total productivity.
Output Input
50,000 cages
Sales price: $3.50 per unit
Production time
620 labor hours
Wages $7.50 per hour
Raw material cost
$30,000
Component cost
$15,350
![Page 29: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/29.jpg)
Example: Solution
The output here can be either the total number of cages or the total revenue.
Suppose we use total revenue as output in this case.
Then, Total Productivity
= Output / Sum of Inputs (in $)
= Revenue / (labor cost + raw material cost + cost of components)
= (50,000 * $3.5 per unit) / (620* $7.5 per hr + $30,000 + $15,350)
= 3.5
![Page 30: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/30.jpg)
Reasons to Globalize
Reasons why domestic business operations decided to change to some form of international operations:
1. Reduce costs (labor, taxes, tariffs, and etc.)
2. Improve supply chain
3. Provide better goods and services
4. Understand markets
5. Learn to improve operations
6. Attract and retain global talent
![Page 31: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/31.jpg)
Reasons to Globalize
Reduce costs: Foreign locations with lower wage rates can lower direct and indirect costs.
◦ Maquiladoras: Mexican factories located along the U.S.-Mexico border that receive preferential tariff treatment.
◦ World Trade Organization (WTO)
◦ North American Free Trade Agreement (NAFTA)
◦ APEC, SEATO, MERCOSUR, CAFTA
◦ European Union (EU)
![Page 32: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/32.jpg)
Reasons to Globalize
Improve the Supply Chain: Locating facilities closer to unique resources, such as Athletic shoe production to China and Perfume manufacturing in France
Provide Better Goods and Services: Some characteristics of goods and services can be subjective and difficult to measure. A local presence permits firms to
1. Have a better understanding of local goods and service requirements ,and
2. Reduce response time to meet customers’ changing requirements.
![Page 33: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/33.jpg)
Reasons to Globalize
Learn to improve operations: Remain open to the free flow of ideas
◦ General Motors partnered with a Japanese auto manufacturer to learn new approaches to production and inventory control
◦ Equipment and layout have been improved using Scandinavian ergonomic competence
Attract and Retain Global Talent
![Page 34: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/34.jpg)
Example: Global Strategies
Benetton – moves inventory to stores around the world faster than its competition by building flexibility into design, production, and distribution
Volvo – considered a Swedish company but until controlled by an American company, Ford, and later on acquired by Geely, a Chinese automaker.
![Page 35: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/35.jpg)
Example: Global Strategies
Sony – purchases components from suppliers in Thailand, Malaysia, and around the world
Boeing – sales and production are worldwide
Haier – A Chinese company, produces compact refrigerators (it has one-third of the US market) and wine cabinets (it has half of the US market) in South Carolina
![Page 36: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/36.jpg)
Concerns when going international
Cultures can be quite different
Attitudes can be quite different towards:
Punctuality
Lunch breaks
Environment
Intellectual property
Thievery
Bribery
Child labor
![Page 37: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/37.jpg)
Concerns when going international
Companies want to consider:
National literacy rate Rate of innovation Rate of technology
change Number of skilled
workers Political stability Product liability laws Export restrictions Variations in language
Work ethic Tax rates Inflation Availability of raw
materials Interest rates Population Number of miles of
highway Phone system
![Page 38: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/38.jpg)
Developing Missions and Strategies
Mission statements tell an organization where it is going
The Strategy tells the organization how to get there
![Page 39: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/39.jpg)
Mission
where are you going?
◦Organization’s purpose for being
◦Answers ‘What do we provide society?’
◦Provides boundaries and focus
![Page 40: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/40.jpg)
Examples of Mission:
Merck: Provide society with superior products and services—innovations and solutions that improve the quality of life and satisfy customer needs—to provide employees with meaningful work and advancement opportunities and investors with a superior rate of return.
Hard Rock Café: To spread the spirit of Rock ’n’ Roll by delivering an exceptional entertainment and dining experience. We are committed to being an important, contributing member of our community and offering the Hard Rock family a fun, healthy, and nurturing work environment while ensuring our long-term success.
![Page 41: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/41.jpg)
Factors Affecting Mission
Benefit to
Society
Mission
Philosophy and Values
Profitability and Growth
Environment
Customers Public Image
![Page 42: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/42.jpg)
Strategy
Action plan to achieve mission
Functional areas have strategies
Strategies exploit opportunities and strengths, neutralize threats, and avoid weaknesses
![Page 43: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/43.jpg)
Strategies for Competitive Advantage
Competitive advantage implies the creation of a system that has a unique advantage over competitors.
Each of the following strategies provides an opportunity for operations managers to achieve competitive advantage:
1. Competing on Differentiation: Better or at least different
2. Competing on Cost: Cheaper
3. Competing on Response: Rapid Response
![Page 44: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/44.jpg)
Competing on Differentiation
Uniqueness can go beyond both the physical characteristics and service attributes to encompass everything that impacts customer’s perception of value.
Examples of businesses competing on differentiation:
◦ Safeskin gloves – leading edge products
◦ Walt Disney Magic Kingdom – experience differentiation
◦ Hard Rock Cafe – dining experience
![Page 45: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/45.jpg)
Competing on Cost
Provide the maximum value as perceived by customer. Does not imply low quality.
Examples of businesses competing on cost:
◦ Southwest Airlines – secondary airports, no frills service, efficient utilization of equipment
◦ Wal-Mart – small overhead, shrinkage, distribution costs
◦ Franz Colruyt – no bags, low light, no music, doors on freezers
![Page 46: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/46.jpg)
Competing on Response
Response is often considered as flexible response, but it also refers to reliable and quick response.
◦ Flexibility is matching market changes in design innovation and volumes. (ex: A way of life at Hewlett-Packard)
◦ Reliability is meeting schedules (ex: German machine industry)
◦ Timeliness is quickness in design, production, and delivery (ex: Johnson Electric, Pizza Hut, Motorola)
![Page 47: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/47.jpg)
Strategy Development Process
Determine the Corporate Mission
State the reason for the firm’s existence and identify the value it wishes to create.
Form a Strategy
Build a competitive advantage, such as low price, design, or volume flexibility, quality, quick delivery, dependability, after-
sale service, broad product lines.
Analyze the EnvironmentIdentify the strengths, weaknesses, opportunities, and threats.
Understand the environment, customers, industry, and competitors.
Figure 2.6
![Page 48: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/48.jpg)
Implement Strategy
The operations manager’s job is a three-step process:
1. Support a Core Competence and implement strategy by identifying and executing the Key Success Factors in the Functional Areas.
2. Build and staff the organization
3. Integrate OM with other strategy
![Page 49: Operations and Supply Chain Management MGMT 3306 Lecture 01 Instructor: Dr. Yan Qin](https://reader030.vdocuments.mx/reader030/viewer/2022033022/56649de65503460f94adecce/html5/thumbnails/49.jpg)
KSFs and Core Competencies
A successful strategy requires determining the firm’s Key success factors (KSFs) and core competencies.
KSFs are those activities that are necessary for a firm to survive in its industry and achieve its goals.
KSFs are often necessary, but not sufficient for competitive advantage.
Core competencies are the set of unique skills, talents, and capabilities that a firm does a world-class standard.
Core competencies allow a firm to set itself apart and develop a competitive advantage.