-
THE NEW DIMENSION IN PERFORATING,CREASING & FOLDING
CF375CP375 DUO
CP375 DUOTF
Technical Specifications --- CP375 DUOTF Perforating, Creasing & Folding
3050 S. Daimler Street, Santa Ana, CA 92705 (949) 752-8222 (800) 255-1933 (949) 851-3054 fax www.duplousa.comAll rights reserved. No part of this document may be produced without permission of Duplo USA Corporation.
Distributed by: Duplo USA Corporation
CP375 DUOTF PERFORATING, CREASING & FOLDING
Feeder system Suction feeder Double sheet detection Ultrasonic
Feeder capacity 7.08“ (180 mm) Working system Multigraf Quick-setTM
Paper size minimum 4.13“ x 5.82“ (105 x 148 mm) Deliveries Folding = shingling deliveryCreasing only = lower reception tray
Paper size maximum 14.76“ x 25.98“ (375 x 660 mm)With table extension:14.76“ x 41.33“ (375x 1,050 mm)
Speed Up to 6,000 LTR/h
Paper stocks perforating 80 -300 gsm or max. 0.3 mm* Dimension 125“ x 24“ x 52“
Paper stocks creasing & folding 80 -400 gsm or max. 0.4 mm* Weight 805 lbs ( 365 kg)
Sheet transfer device Vacuum belt Electrical connection 100-240 VAC, 50/60 Hz
Control panel Touchscreen
* Paper stocks depending on material quality
TOUCHLINE CP375 DUO TOUCHLINE CP375 DUO & TCF375
Standard Tools Cross Direction
Rotary Tools Feed Direction
Perforating max. 4 heads simultaneously
Standard perforation 11 TPI (optional: 17 TPI / 26 TPI)
Minimum distance 30 mm, from line to line
Distance time perforation min. 5 mm
Number of perforations 1-5 per sheet
Perforating Creasing
Tool detection automatic automatic
Pressure adjustment 3 depths for each style 3 depths for each style
Number of tools (standard) 1 perforating tool, 11 TPI 1 negative creasing tool
Optional perforating knife 17 TPI and 26 TPI –
Additional tools stop perforating tool,
optional
positive creasing tool,
optional
Number of operations up to 20 per sheet up to 20 per sheet
Minimum distance 3 mm 1 mm
Time perforating/creasing yes, optional –
Technical Specifications Perforating & Creasing
Feeder system suction feeder
Feeder capacitiy 180 mm / 660 mm*
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set
interchangeable tools
Reception tray height 120 mm
Delivery belt optional shingling delivery,
L = 1‘100 mm, P/N 482.112
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘650 x 610 x 1‘200 mm
ca. 2‘580 x 680 x 1‘200 mm*
Weight ca. 164 kg / 279 kg*
Electrical connection 100-240 VAC, 50/60 Hz
Technical Specifications Perforating, Creasing & Folding
Feeder system suction feeder
Feeder capacity 180 mm / 660 mm*
Sheet transfer device vacuum belt
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing & folding 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set interchangeable
tools
Deliveries folding = shingling delivery
creasing only = lower reception tray
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 3‘170 x 610 x 1‘320 mm
ca. 4‘050 x 680 x 1‘320 mm*
Weight ca. 365 kg / 385 kg*
Electrical connection 100-240 VAC, 50/60 Hz
*CP375 DUO and TCF375 with Mistral Feeder PFM
Ref:
Ges
amtp
rosp
ekt T
L/EN
/V3/
04.1
7
Two cross tool positionsThe creasing and perforat-ing tools are automatically detected and the relevant pressure is automatically set. No manual adjustments are needed.
Multiple applicationsThe creasing tools (positive and negative) as well as the perforating tools (standard and stop perforation) may be used on either tool position.
Creasing tool negative
Creasing tool positive
THE NEW DIMENSION IN PERFORATING, CREASING AND FOLDING
OVERVIEW TOUCHLINE FAMILY
2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour
Sample Applications In One Operation
CREASING/FOLDING
PERFORATING
SOME FEATURES
***MORE T
HAN
2’000 CUSTO
MERS
BELIEVE IN OU
R
TOUCHLINE M
ACHINES.
MULTIFINISH
ING MAKES
YOUR LIFE EAS
IER.
***
Multigraf AG follows a policy of continuous improvement and reserves the right to modify the technical data provided in this document without prior notification. The production rates are based on optimum operating conditions and may fall depending on the usage and ambient conditions. Subject to technical modifications and errors.
Multigraf AGPrint Finishing Systems
Grindelstrasse 26CH-5630 Muri (AG)
T +41 56 675 58 00F +41 56 675 58 60
www.youtube.com/eurofold
CREASINGNEGATIVE
PERFORATIONLENGTHWAYS
PERFORATIONCROSSWAYS
WITHOUTCOMPRESSOR
CREASINGPOSITIVE
dB
FOLDING
DESIGNED AND PRODUCED IN SWITZERLAND
CP375 DUO and TCF375 with Mistral Feeder PFM
**Paper stocks depending on material quality
CP375 DUO and TCF375 with Mistral Feeder PFM
CP375 DUO and TCF375
CP375 DUO
CP375 DUO with Mistral Feeder PFM
*CP375 DUO with Mistral Feeder PFM**Paper stocks depending on material quality
TOUCHLINE CP375 DUO TOUCHLINE CP375 DUO & TCF375
Standard Tools Cross Direction
Rotary Tools Feed Direction
Perforating max. 4 heads simultaneously
Standard perforation 11 TPI (optional: 17 TPI / 26 TPI)
Minimum distance 30 mm, from line to line
Distance time perforation min. 5 mm
Number of perforations 1-5 per sheet
Perforating Creasing
Tool detection automatic automatic
Pressure adjustment 3 depths for each style 3 depths for each style
Number of tools (standard) 1 perforating tool, 11 TPI 1 negative creasing tool
Optional perforating knife 17 TPI and 26 TPI –
Additional tools stop perforating tool,
optional
positive creasing tool,
optional
Number of operations up to 20 per sheet up to 20 per sheet
Minimum distance 3 mm 1 mm
Time perforating/creasing yes, optional –
Technical Specifications Perforating & Creasing
Feeder system suction feeder
Feeder capacitiy 180 mm / 660 mm*
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set
interchangeable tools
Reception tray height 120 mm
Delivery belt optional shingling delivery,
L = 1‘100 mm, P/N 482.112
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘650 x 610 x 1‘200 mm
ca. 2‘580 x 680 x 1‘200 mm*
Weight ca. 164 kg / 279 kg*
Electrical connection 100-240 VAC, 50/60 Hz
Technical Specifications Perforating, Creasing & Folding
Feeder system suction feeder
Feeder capacity 180 mm / 660 mm*
Sheet transfer device vacuum belt
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing & folding 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set interchangeable
tools
Deliveries folding = shingling delivery
creasing only = lower reception tray
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 3‘170 x 610 x 1‘320 mm
ca. 4‘050 x 680 x 1‘320 mm*
Weight ca. 365 kg / 385 kg*
Electrical connection 100-240 VAC, 50/60 Hz
*CP375 DUO and TCF375 with Mistral Feeder PFM
Ref:
Ges
amtp
rosp
ekt T
L/EN
/V3/
04.1
7
Two cross tool positionsThe creasing and perforat-ing tools are automatically detected and the relevant pressure is automatically set. No manual adjustments are needed.
Multiple applicationsThe creasing tools (positive and negative) as well as the perforating tools (standard and stop perforation) may be used on either tool position.
Creasing tool negative
Creasing tool positive
THE NEW DIMENSION IN PERFORATING, CREASING AND FOLDING
OVERVIEW TOUCHLINE FAMILY
2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour
Sample Applications In One Operation
CREASING/FOLDING
PERFORATING
SOME FEATURES
***MORE T
HAN
2’000 CUSTO
MERS
BELIEVE IN OU
R
TOUCHLINE M
ACHINES.
MULTIFINISH
ING MAKES
YOUR LIFE EAS
IER.
***
Multigraf AG follows a policy of continuous improvement and reserves the right to modify the technical data provided in this document without prior notification. The production rates are based on optimum operating conditions and may fall depending on the usage and ambient conditions. Subject to technical modifications and errors.
Multigraf AGPrint Finishing Systems
Grindelstrasse 26CH-5630 Muri (AG)
T +41 56 675 58 00F +41 56 675 58 60
www.youtube.com/eurofold
CREASINGNEGATIVE
PERFORATIONLENGTHWAYS
PERFORATIONCROSSWAYS
WITHOUTCOMPRESSOR
CREASINGPOSITIVE
dB
FOLDING
DESIGNED AND PRODUCED IN SWITZERLAND
CP375 DUO and TCF375 with Mistral Feeder PFM
**Paper stocks depending on material quality
CP375 DUO and TCF375 with Mistral Feeder PFM
CP375 DUO and TCF375
CP375 DUO
CP375 DUO with Mistral Feeder PFM
*CP375 DUO with Mistral Feeder PFM**Paper stocks depending on material quality
TOUCHLINE CP375 DUO TOUCHLINE CP375 DUO & TCF375
Standard Tools Cross Direction
Rotary Tools Feed Direction
Perforating max. 4 heads simultaneously
Standard perforation 11 TPI (optional: 17 TPI / 26 TPI)
Minimum distance 30 mm, from line to line
Distance time perforation min. 5 mm
Number of perforations 1-5 per sheet
Perforating Creasing
Tool detection automatic automatic
Pressure adjustment 3 depths for each style 3 depths for each style
Number of tools (standard) 1 perforating tool, 11 TPI 1 negative creasing tool
Optional perforating knife 17 TPI and 26 TPI –
Additional tools stop perforating tool,
optional
positive creasing tool,
optional
Number of operations up to 20 per sheet up to 20 per sheet
Minimum distance 3 mm 1 mm
Time perforating/creasing yes, optional –
Technical Specifications Perforating & Creasing
Feeder system suction feeder
Feeder capacitiy 180 mm / 660 mm*
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set
interchangeable tools
Reception tray height 120 mm
Delivery belt optional shingling delivery,
L = 1‘100 mm, P/N 482.112
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘650 x 610 x 1‘200 mm
ca. 2‘580 x 680 x 1‘200 mm*
Weight ca. 164 kg / 279 kg*
Electrical connection 100-240 VAC, 50/60 Hz
Technical Specifications Perforating, Creasing & Folding
Feeder system suction feeder
Feeder capacity 180 mm / 660 mm*
Sheet transfer device vacuum belt
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing & folding 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set interchangeable
tools
Deliveries folding = shingling delivery
creasing only = lower reception tray
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 3‘170 x 610 x 1‘320 mm
ca. 4‘050 x 680 x 1‘320 mm*
Weight ca. 365 kg / 385 kg*
Electrical connection 100-240 VAC, 50/60 Hz
*CP375 DUO and TCF375 with Mistral Feeder PFM
Ref:
Ges
amtp
rosp
ekt T
L/EN
/V3/
04.1
7
Two cross tool positionsThe creasing and perforat-ing tools are automatically detected and the relevant pressure is automatically set. No manual adjustments are needed.
Multiple applicationsThe creasing tools (positive and negative) as well as the perforating tools (standard and stop perforation) may be used on either tool position.
Creasing tool negative
Creasing tool positive
THE NEW DIMENSION IN PERFORATING, CREASING AND FOLDING
OVERVIEW TOUCHLINE FAMILY
2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour
Sample Applications In One Operation
CREASING/FOLDING
PERFORATING
SOME FEATURES
***MORE T
HAN
2’000 CUSTO
MERS
BELIEVE IN OU
R
TOUCHLINE M
ACHINES.
MULTIFINISH
ING MAKES
YOUR LIFE EAS
IER.
***
Multigraf AG follows a policy of continuous improvement and reserves the right to modify the technical data provided in this document without prior notification. The production rates are based on optimum operating conditions and may fall depending on the usage and ambient conditions. Subject to technical modifications and errors.
Multigraf AGPrint Finishing Systems
Grindelstrasse 26CH-5630 Muri (AG)
T +41 56 675 58 00F +41 56 675 58 60
www.youtube.com/eurofold
CREASINGNEGATIVE
PERFORATIONLENGTHWAYS
PERFORATIONCROSSWAYS
WITHOUTCOMPRESSOR
CREASINGPOSITIVE
dB
FOLDING
DESIGNED AND PRODUCED IN SWITZERLAND
CP375 DUO and TCF375 with Mistral Feeder PFM
**Paper stocks depending on material quality
CP375 DUO and TCF375 with Mistral Feeder PFM
CP375 DUO and TCF375
CP375 DUO
CP375 DUO with Mistral Feeder PFM
*CP375 DUO with Mistral Feeder PFM**Paper stocks depending on material quality
1117AO
CP375 DUOTF
-
TOUCHLINE C375 TOUCHLINE CF375 TOUCHLINE CP375 MONO
Technical Specifications Creasing
Feeder system suction feeder
Feeder capacitiy 180 mm
Paper size minimum 105 x 148 mm
Paper size maximum 375 x 660 mm
375 x 1‘050 mm with table extension
Paper stocks creasing 80-400 gsm or max. 0.4 mm*
Control panel touchscreen
Double sheet detection ultrasonic
Creasing system creasing bar
Reception tray height 120 mm
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘560 x 610 x 1‘200 mm
Weight ca. 132 kg
Electrical connection 100-240 VAC, 50/60 Hz
Creasing Tool
*Paper stocks depending on material quality
Pressure adjustment 3 depths, automatically adjustable
by touchscreen
Number of tools 1 creasing tool = 2 different styles
more creasing tools optionally available
Number of operations up to 20 per sheet
Minimum distance 1 mm
Perforation no
Creasing patterns for the following fold types are included in the standard program:
single fold Z foldletter fold
gate fold prepared for closed gate fold
double parallel fold
Technical Specifications Creasing & Folding
Feeder system suction feeder
Feeder capacity 180 mm / 660 mm*
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table extension
Paper stocks 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Creasing system Multigraf Swingbar
Creasing styles 1 creasing bar = 2 styles
Crease depths 3 automatic setups
Number of creases 20
TOUCHLINE CF375 supports the followng common fold types:
single fold Z foldwithout folding gate fold double parallel fold
Minimum crease distance 30 mm
Fold system Multigraf Pro-Knife
Number of folds 2
Fold length minimum 30 mm
Fold length maximum 500 mm
Delivery belt length 820 mm
Reception tray height 120 mm
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘820 x 610 x 1‘320 mm
ca. 2‘790 x 680 x 1‘320 mm*
Weight ca. 196 kg / 311 kg*
Electrical connection 100-240 VAC, 50/60 Hz
**Paper stocks depending on material quality
Perforating and creasing toolsThe tools are automatically detected and the relevant pressure is automatically set. Additional tools may be stored in the especially designed parking slots.
Rotary toolsUp to four perforating heads are available: all of them plug and play. The setup will be done within just a few seconds on the touchscreen control panel.
Technical Specifications Perforating & Creasing
Feeder system suction feeder
Feeder capacity 180 mm / 660 mm*
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set interchangeable
tools
Reception tray height 120 mm
Delivery belt optional shingling delivery,
L = 1‘100 mm, P/N 482.112
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘560 x 610 x 1‘200 mm
ca. 2‘530 x 680 x 1‘200 mm*
Weight ca. 140 kg / 255 kg*
Electrical connection 100-240 VAC, 50/60 Hz
*CP375 MONO with Mistral Feeder PFM
One touch operationA small, centralised and ergonomic operating panel offers all necessary functions for a fast production start.
Two delivery sectionsThe delivery side consists of two different output levels. For creasing and folding, the upper delivery belt is used. For creasing only the lower reception tray.
TouchscreenVery simple and menu driven operation. All elementary settings are entered directly over the touchscreen.
Perforating deviceAn online perforating device is available for the lower exit level as an option.
Vacuum pile feederThe pile feeder is using a vacuum belt technology and air knife control for a perfect sheet separation. It handles paper sizes from 105 x 148 mm to 375 x 1‘050 mm.
Double sheet detectionA professional ultrasonic double sheet detection system which offers a 100% control of all sheets running through the machine.
Side guide systemThe side guide unite features a very precise sheet infeed system: simple one hand operation, top guiding system for secure and straight infeed.
2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour
letter fold
2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour
80-400
*CF375 with Mistral Feeder PFM
C375
CF375 with Mistral Feeder PFM
CF375 CP375 MONO
CP375 MONO mit Mistral Feeder PFM
prepared for closed gate fold
**Paper stocks depending on material quality
Technical Specifications --- CF375 Creasing & Folding Technical Specifications --- CP375 DUO Perforating & Creasing
Feeder system Suction feeder Double sheet detection Ultrasonic
Feeder capacity 7.08“ (180 mm) Working system Multigraf Quick-setTM
Paper size minimum 4.13“ x 5.82“ (105 x 148 mm) Reception tray height 4.72“ (120 mm)
Paper size maximum 14.76“ x 25.98“ (375 x 660 mm)With table extension:14.76“ x 41.33“ (375 x 1,050 mm)
Speed Up to 6,000 LTR/h
Paper stocks perforating 80 -300 gsm or max. 0.3 mm* Delivery belt Optional shingling delivery,L = 43.3“ (1,100 mm), P/N 482.112
Paper stocks creasing 80 -400 gsm or max. 0.4 mm* Dimension 65“ x 24“ x 48“
Creasing system Multigraf Swing-BarTM Weight 362 lbs ( 164 kg)
Control panel Touchscreen Electrical connection 100-240 VAC, 50/60 Hz
CF375 CREASING & FOLDING CP375 DUO PERFORATING & CREASING
Feeder system Suction feeder Fold system Multigraf Pro-KnifeTM
Feeder capacity 7.08“ (180 mm) Number of fold knifes 2
Paper size minimum 4.13“ x 5.82“ (105 x 148 mm) Fold length minimum 1.18“ (30 mm)
Paper size maximum 14.76“ x 25.98“ (375 x 660 mm)With table extension:14.76“ x 41.33“ (375 x 1,050 mm)
Fold length maximum 19.68“ (500 mm)
Paper stocks 80 -400 gsm or max. 0.4 mm* Delivery belt length 35.43“ (820 mm)
Control panel Touchscreen Reception tray height 4.72“ (120 mm)
Creasing system Multigraf Swing-BarTM Speed Up to 6,000 LTR/h
Crease styles 2, standard and narrow Dimension 74“ x 24“ x 52“
Crease depths 3 automatic setups Weight 432 lbs ( 196 kg)
Minimum crease distance 1.18“ (30 mm) Electrical connection 100-240 VAC, 50/60 Hz
Number of creases 20
* Paper stocks depending on material qualityCF375 supports the following common fold types:
single fold letter fold Z foldwithout folding gate fold double parallel foldclosed gate fold
TOUCHLINE CP375 DUO TOUCHLINE CP375 DUO & TCF375
Standard Tools Cross Direction
Rotary Tools Feed Direction
Perforating max. 4 heads simultaneously
Standard perforation 11 TPI (optional: 17 TPI / 26 TPI)
Minimum distance 30 mm, from line to line
Distance time perforation min. 5 mm
Number of perforations 1-5 per sheet
Perforating Creasing
Tool detection automatic automatic
Pressure adjustment 3 depths for each style 3 depths for each style
Number of tools (standard) 1 perforating tool, 11 TPI 1 negative creasing tool
Optional perforating knife 17 TPI and 26 TPI –
Additional tools stop perforating tool,
optional
positive creasing tool,
optional
Number of operations up to 20 per sheet up to 20 per sheet
Minimum distance 3 mm 1 mm
Time perforating/creasing yes, optional –
Technical Specifications Perforating & Creasing
Feeder system suction feeder
Feeder capacitiy 180 mm / 660 mm*
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set
interchangeable tools
Reception tray height 120 mm
Delivery belt optional shingling delivery,
L = 1‘100 mm, P/N 482.112
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘650 x 610 x 1‘200 mm
ca. 2‘580 x 680 x 1‘200 mm*
Weight ca. 164 kg / 279 kg*
Electrical connection 100-240 VAC, 50/60 Hz
Technical Specifications Perforating, Creasing & Folding
Feeder system suction feeder
Feeder capacity 180 mm / 660 mm*
Sheet transfer device vacuum belt
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing & folding 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set interchangeable
tools
Deliveries folding = shingling delivery
creasing only = lower reception tray
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 3‘170 x 610 x 1‘320 mm
ca. 4‘050 x 680 x 1‘320 mm*
Weight ca. 365 kg / 385 kg*
Electrical connection 100-240 VAC, 50/60 Hz
*CP375 DUO and TCF375 with Mistral Feeder PFM
Ref:
Ges
amtp
rosp
ekt T
L/EN
/V3/
04.1
7
Two cross tool positionsThe creasing and perforat-ing tools are automatically detected and the relevant pressure is automatically set. No manual adjustments are needed.
Multiple applicationsThe creasing tools (positive and negative) as well as the perforating tools (standard and stop perforation) may be used on either tool position.
Creasing tool negative
Creasing tool positive
THE NEW DIMENSION IN PERFORATING, CREASING AND FOLDING
OVERVIEW TOUCHLINE FAMILY
2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour
Sample Applications In One Operation
CREASING/FOLDING
PERFORATING
SOME FEATURES
***MORE T
HAN
2’000 CUSTO
MERS
BELIEVE IN OU
R
TOUCHLINE M
ACHINES.
MULTIFINISH
ING MAKES
YOUR LIFE EAS
IER.
***
Multigraf AG follows a policy of continuous improvement and reserves the right to modify the technical data provided in this document without prior notification. The production rates are based on optimum operating conditions and may fall depending on the usage and ambient conditions. Subject to technical modifications and errors.
Multigraf AGPrint Finishing Systems
Grindelstrasse 26CH-5630 Muri (AG)
T +41 56 675 58 00F +41 56 675 58 60
www.youtube.com/eurofold
CREASINGNEGATIVE
PERFORATIONLENGTHWAYS
PERFORATIONCROSSWAYS
WITHOUTCOMPRESSOR
CREASINGPOSITIVE
dB
FOLDING
DESIGNED AND PRODUCED IN SWITZERLAND
CP375 DUO and TCF375 with Mistral Feeder PFM
**Paper stocks depending on material quality
CP375 DUO and TCF375 with Mistral Feeder PFM
CP375 DUO and TCF375
CP375 DUO
CP375 DUO with Mistral Feeder PFM
*CP375 DUO with Mistral Feeder PFM**Paper stocks depending on material quality
* Paper stocks depending on material quality
TOUCHLINE C375 TOUCHLINE CF375 TOUCHLINE CP375 MONO
Technical Specifications Creasing
Feeder system suction feeder
Feeder capacitiy 180 mm
Paper size minimum 105 x 148 mm
Paper size maximum 375 x 660 mm
375 x 1‘050 mm with table extension
Paper stocks creasing 80-400 gsm or max. 0.4 mm*
Control panel touchscreen
Double sheet detection ultrasonic
Creasing system creasing bar
Reception tray height 120 mm
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘560 x 610 x 1‘200 mm
Weight ca. 132 kg
Electrical connection 100-240 VAC, 50/60 Hz
Creasing Tool
*Paper stocks depending on material quality
Pressure adjustment 3 depths, automatically adjustable
by touchscreen
Number of tools 1 creasing tool = 2 different styles
more creasing tools optionally available
Number of operations up to 20 per sheet
Minimum distance 1 mm
Perforation no
Creasing patterns for the following fold types are included in the standard program:
single fold Z foldletter fold
gate fold prepared for closed gate fold
double parallel fold
Technical Specifications Creasing & Folding
Feeder system suction feeder
Feeder capacity 180 mm / 660 mm*
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table extension
Paper stocks 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Creasing system Multigraf Swingbar
Creasing styles 1 creasing bar = 2 styles
Crease depths 3 automatic setups
Number of creases 20
TOUCHLINE CF375 supports the followng common fold types:
single fold Z foldwithout folding gate fold double parallel fold
Minimum crease distance 30 mm
Fold system Multigraf Pro-Knife
Number of folds 2
Fold length minimum 30 mm
Fold length maximum 500 mm
Delivery belt length 820 mm
Reception tray height 120 mm
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘820 x 610 x 1‘320 mm
ca. 2‘790 x 680 x 1‘320 mm*
Weight ca. 196 kg / 311 kg*
Electrical connection 100-240 VAC, 50/60 Hz
**Paper stocks depending on material quality
Perforating and creasing toolsThe tools are automatically detected and the relevant pressure is automatically set. Additional tools may be stored in the especially designed parking slots.
Rotary toolsUp to four perforating heads are available: all of them plug and play. The setup will be done within just a few seconds on the touchscreen control panel.
Technical Specifications Perforating & Creasing
Feeder system suction feeder
Feeder capacity 180 mm / 660 mm*
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set interchangeable
tools
Reception tray height 120 mm
Delivery belt optional shingling delivery,
L = 1‘100 mm, P/N 482.112
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘560 x 610 x 1‘200 mm
ca. 2‘530 x 680 x 1‘200 mm*
Weight ca. 140 kg / 255 kg*
Electrical connection 100-240 VAC, 50/60 Hz
*CP375 MONO with Mistral Feeder PFM
One touch operationA small, centralised and ergonomic operating panel offers all necessary functions for a fast production start.
Two delivery sectionsThe delivery side consists of two different output levels. For creasing and folding, the upper delivery belt is used. For creasing only the lower reception tray.
TouchscreenVery simple and menu driven operation. All elementary settings are entered directly over the touchscreen.
Perforating deviceAn online perforating device is available for the lower exit level as an option.
Vacuum pile feederThe pile feeder is using a vacuum belt technology and air knife control for a perfect sheet separation. It handles paper sizes from 105 x 148 mm to 375 x 1‘050 mm.
Double sheet detectionA professional ultrasonic double sheet detection system which offers a 100% control of all sheets running through the machine.
Side guide systemThe side guide unite features a very precise sheet infeed system: simple one hand operation, top guiding system for secure and straight infeed.
2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour
letter fold
2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour
80-400
*CF375 with Mistral Feeder PFM
C375
CF375 with Mistral Feeder PFM
CF375 CP375 MONO
CP375 MONO mit Mistral Feeder PFM
prepared for closed gate fold
**Paper stocks depending on material quality
TOUCHLINE CP375 DUO TOUCHLINE CP375 DUO & TCF375
Standard Tools Cross Direction
Rotary Tools Feed Direction
Perforating max. 4 heads simultaneously
Standard perforation 11 TPI (optional: 17 TPI / 26 TPI)
Minimum distance 30 mm, from line to line
Distance time perforation min. 5 mm
Number of perforations 1-5 per sheet
Perforating Creasing
Tool detection automatic automatic
Pressure adjustment 3 depths for each style 3 depths for each style
Number of tools (standard) 1 perforating tool, 11 TPI 1 negative creasing tool
Optional perforating knife 17 TPI and 26 TPI –
Additional tools stop perforating tool,
optional
positive creasing tool,
optional
Number of operations up to 20 per sheet up to 20 per sheet
Minimum distance 3 mm 1 mm
Time perforating/creasing yes, optional –
Technical Specifications Perforating & Creasing
Feeder system suction feeder
Feeder capacitiy 180 mm / 660 mm*
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set
interchangeable tools
Reception tray height 120 mm
Delivery belt optional shingling delivery,
L = 1‘100 mm, P/N 482.112
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘650 x 610 x 1‘200 mm
ca. 2‘580 x 680 x 1‘200 mm*
Weight ca. 164 kg / 279 kg*
Electrical connection 100-240 VAC, 50/60 Hz
Technical Specifications Perforating, Creasing & Folding
Feeder system suction feeder
Feeder capacity 180 mm / 660 mm*
Sheet transfer device vacuum belt
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing & folding 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set interchangeable
tools
Deliveries folding = shingling delivery
creasing only = lower reception tray
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 3‘170 x 610 x 1‘320 mm
ca. 4‘050 x 680 x 1‘320 mm*
Weight ca. 365 kg / 385 kg*
Electrical connection 100-240 VAC, 50/60 Hz
*CP375 DUO and TCF375 with Mistral Feeder PFM
Ref:
Ges
amtp
rosp
ekt T
L/EN
/V3/
04.1
7
Two cross tool positionsThe creasing and perforat-ing tools are automatically detected and the relevant pressure is automatically set. No manual adjustments are needed.
Multiple applicationsThe creasing tools (positive and negative) as well as the perforating tools (standard and stop perforation) may be used on either tool position.
Creasing tool negative
Creasing tool positive
THE NEW DIMENSION IN PERFORATING, CREASING AND FOLDING
OVERVIEW TOUCHLINE FAMILY
2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour
Sample Applications In One Operation
CREASING/FOLDING
PERFORATING
SOME FEATURES
***MORE T
HAN
2’000 CUSTO
MERS
BELIEVE IN OU
R
TOUCHLINE M
ACHINES.
MULTIFINISH
ING MAKES
YOUR LIFE EAS
IER.
***
Multigraf AG follows a policy of continuous improvement and reserves the right to modify the technical data provided in this document without prior notification. The production rates are based on optimum operating conditions and may fall depending on the usage and ambient conditions. Subject to technical modifications and errors.
Multigraf AGPrint Finishing Systems
Grindelstrasse 26CH-5630 Muri (AG)
T +41 56 675 58 00F +41 56 675 58 60
www.youtube.com/eurofold
CREASINGNEGATIVE
PERFORATIONLENGTHWAYS
PERFORATIONCROSSWAYS
WITHOUTCOMPRESSOR
CREASINGPOSITIVE
dB
FOLDING
DESIGNED AND PRODUCED IN SWITZERLAND
CP375 DUO and TCF375 with Mistral Feeder PFM
**Paper stocks depending on material quality
CP375 DUO and TCF375 with Mistral Feeder PFM
CP375 DUO and TCF375
CP375 DUO
CP375 DUO with Mistral Feeder PFM
*CP375 DUO with Mistral Feeder PFM**Paper stocks depending on material quality
TOUCHLINE CP375 DUO TOUCHLINE CP375 DUO & TCF375
Standard Tools Cross Direction
Rotary Tools Feed Direction
Perforating max. 4 heads simultaneously
Standard perforation 11 TPI (optional: 17 TPI / 26 TPI)
Minimum distance 30 mm, from line to line
Distance time perforation min. 5 mm
Number of perforations 1-5 per sheet
Perforating Creasing
Tool detection automatic automatic
Pressure adjustment 3 depths for each style 3 depths for each style
Number of tools (standard) 1 perforating tool, 11 TPI 1 negative creasing tool
Optional perforating knife 17 TPI and 26 TPI –
Additional tools stop perforating tool,
optional
positive creasing tool,
optional
Number of operations up to 20 per sheet up to 20 per sheet
Minimum distance 3 mm 1 mm
Time perforating/creasing yes, optional –
Technical Specifications Perforating & Creasing
Feeder system suction feeder
Feeder capacitiy 180 mm / 660 mm*
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set
interchangeable tools
Reception tray height 120 mm
Delivery belt optional shingling delivery,
L = 1‘100 mm, P/N 482.112
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 1‘650 x 610 x 1‘200 mm
ca. 2‘580 x 680 x 1‘200 mm*
Weight ca. 164 kg / 279 kg*
Electrical connection 100-240 VAC, 50/60 Hz
Technical Specifications Perforating, Creasing & Folding
Feeder system suction feeder
Feeder capacity 180 mm / 660 mm*
Sheet transfer device vacuum belt
Paper size minimum 105 x 148 mm
Paper size maximum 375 (370*) x 660 mm
375 (370*) x 1‘050 mm with table
extension
Paper stocks perforating 80-300 gsm or max. 0.3 mm**
Paper stocks creasing & folding 80-400 gsm or max. 0.4 mm**
Control panel touchscreen
Double sheet detection ultrasonic
Working system Multigraf Quick-Set interchangeable
tools
Deliveries folding = shingling delivery
creasing only = lower reception tray
Speed depending on job, up to 6‘000 sh./h
Dimension ca. 3‘170 x 610 x 1‘320 mm
ca. 4‘050 x 680 x 1‘320 mm*
Weight ca. 365 kg / 385 kg*
Electrical connection 100-240 VAC, 50/60 Hz
*CP375 DUO and TCF375 with Mistral Feeder PFM
Ref:
Ges
amtp
rosp
ekt T
L/EN
/V3/
04.1
7
Two cross tool positionsThe creasing and perforat-ing tools are automatically detected and the relevant pressure is automatically set. No manual adjustments are needed.
Multiple applicationsThe creasing tools (positive and negative) as well as the perforating tools (standard and stop perforation) may be used on either tool position.
Creasing tool negative
Creasing tool positive
THE NEW DIMENSION IN PERFORATING, CREASING AND FOLDING
OVERVIEW TOUCHLINE FAMILY
2 Folds
375 x1050mm
105 x148mm
100-400gsm 20
Speed
5000A4/hour
Speed
6000A5/hour
Sample Applications In One Operation
CREASING/FOLDING
PERFORATING
SOME FEATURES
***MORE T
HAN
2’000 CUSTO
MERS
BELIEVE IN OU
R
TOUCHLINE M
ACHINES.
MULTIFINISH
ING MAKES
YOUR LIFE EAS
IER.
***
Multigraf AG follows a policy of continuous improvement and reserves the right to modify the technical data provided in this document without prior notification. The production rates are based on optimum operating conditions and may fall depending on the usage and ambient conditions. Subject to technical modifications and errors.
Multigraf AGPrint Finishing Systems
Grindelstrasse 26CH-5630 Muri (AG)
T +41 56 675 58 00F +41 56 675 58 60
www.youtube.com/eurofold
CREASINGNEGATIVE
PERFORATIONLENGTHWAYS
PERFORATIONCROSSWAYS
WITHOUTCOMPRESSOR
CREASINGPOSITIVE
dB
FOLDING
DESIGNED AND PRODUCED IN SWITZERLAND
CP375 DUO and TCF375 with Mistral Feeder PFM
**Paper stocks depending on material quality
CP375 DUO and TCF375 with Mistral Feeder PFM
CP375 DUO and TCF375
CP375 DUO
CP375 DUO with Mistral Feeder PFM
*CP375 DUO with Mistral Feeder PFM**Paper stocks depending on material quality
Standard Tools Cross Direction
Perforating Creasing
Tool detection automatic automatic
Pressure adjustment 3 depths for each style 3 depths for each style
Number of tools (standard) 1 perforating tool, 11 TPI 1 negative creasing tool
Optional perforating knife 17 TPI and 26 TPI -
Additional tools optional stop perforating tool positive creasing tool
Number of operations up to 20 per sheet up to 20 per sheet
Minumum distance 3 mm 1 mm
Time perforating/creasing yes, optional -
Standard Tools Cross Direction
Perforating 2 standard heads, max 4 heads simultaneously
Standard perforation 11 TPI (optional : 17 TPI/26 TPI)
Minumum distance 30 mm, from line to line
Distance time perforation min. 5 mm
Number of operations 1 - 5 per sheet