OVER 100 YEARS OF AUSTRALIAN MANUFACTURING
NON SPRING-BALANCED ROLLER SHUTTER OPERATOR
2
U-DriveThe configurable, high-cycle operator system for non spring-balanced roller shutters and grilles.
U-Drive is an extremely powerful operator designed to chain-drive non spring-balanced roller shutters, growing in use within high-cycle applications such as carparks and warehouse docks. It is available in two variations, for very high-cycle shutters up to 18m² (typical carparks) and low-cycle shutters in industrial applications up to 34m².
With an extremely robust gearbox and fan-cooled motor with solenoid brake, the operator is designed for heavy lifting and high-cycle counts.
The U-Drive range also includes an innovative mounting system for the door drum and operator. Offering many mounting options, it is ideal for tight applications.
LASTING PERFORMANCE
SAFE AND COMPLIANT
ADAPTABLE MOUNTING
CARPARK READY
HIGH-CYCLE WARRANTY
The U-Drive gearbox and motor combination deliver lasting performance, necessary with high-cycle applications.
The fan-cooled motor with solenoid brake delivers serious duty cycles.
Meets all applicable regulatory standards. Grifco performs thorough testing to ensure products are indeed safe and compliant.
The innovative mounting system allows for U-Drive to be installed in a variety of different configurations.
It is ideal for tight applications with little headroom or side room.
When powered by the GLMe2 family of mechanical logic controls, U-Drive has all the proven eDrive +2.0 logic features.
With multiple configurations, accessories and expansion capability, it is truly carpark ready.
The warranty offered on the U-Drive covers the high-cycle workload of a busy roller shutter.
The 2 year / 50,000 cycle warranty covers the entire operator, not just the “drive units” as warranted by other manufacturers.
2 Year50,000Cycle
Warranty
Specifications Typical InstallationNon spring-balanced roller shutter, with U-Drive mounting brackets, U-Drive operator, flange bearing and safety brake at opposite end of door drum (inset).
GUD-H053M GUD-H073M
Peak Opener Torque 180Nm 260Nm
Peak Drum Torque 600Nm 600Nm
Operator Power 0.5Hp 0.75Hp
Full Load Current 1.45A 2.0A
Voltage (AC) 415V 3Ph 415V 3Ph
Max. Cycle Time 60 sec 120 sec
Max. Door Size 18m² 34m²
Duty Cycle S3-60 (60%) S3-10 (10%)
Drive Sprocket Supplied 25T 12B 25T 12B
Drive Chain Supplied 12B 1.5m 12B 1.5m
Safety Brake Speed Max. 16 RPM Max. 16 RPM
Safety Brake Torque 600N Max. 600N Max.
Compliance AS/NZS 60335-2-103
Warranty 2 Years / 50,000 Cycles
3
Non spring-balanced doors are becoming increasingly popular for vehicular access applications. Due to the high-volume of use and speed requirements, springless door drums offer incredible longevity without need to maintain springs.
Without spring-balancing, extra consideration needs to be given to door safety. For this reason U-Drive is supplied with an AS/NZS compliant safety brake which is mounted on the non-driven end of the door drum.
The Chamberlain Group factory in West Gosford, NSW, Australia manufactures the U-Drive operator. It is continually updated with modern manufacturing equipment and processes to maintain an excellent level of craftsmanship and quality. Grifco has been manufacturing for over 100 years in Australia.
Engineered and Manufactured in Australia
Carpark Door Automation
U-Drive is ideal for non spring-balanced roller shutters and grilles commonly found in underground carparks. When controlled by Grifco’s GLMe2 portfolio of logic controls, U-Drive becomes carpark ready with safety beams (as shown) and complete carpark intelligence. Accessories such as traffic lights (shown above), entrapment protection and remote transmitter management can all be added to suit the application’s needs.
4
The extremely powerful and efficient operator is designed specifically for high-cycle applications such as carparks and busy industrial doors.
The motor and gearbox combination have been purposely designed for smooth, reliable operation and and exceptional longevity.
Safety BrakeSafety Brake rated to 600Nm. This anti-fall device is mounted at the non-driven end of the door drum and is an essential safety measure for chain driven non spring-balanced roller shutters.
Integral solenoid brake provides precise door control
Configurable operator mounting plate for installation flexibility
U-Drive includes mounting and transmission hardware such as sprocket and drive chain
Fan-cooled motor for intensive high-cycle applications such as carparks and distribution centres
Manual operation (via hand or power tool) for ease of initial setup
Durable, high-cycle gearbox for consistent, smooth operation and longevity.
Advanced synthetic oil for efficient, maintenance-free operation
U-Drive OperatorU-DriveThe configurable, high-cycle operator system for non spring-balanced roller shutters and grilles.
6mm hex drive
5
U-Drive features two certified mounting kits for the entire door installation. Mounting kits are designed for easy installation and alignment. The mounting brackets feature durable zinc-plated steel (8mm or 10mm) for corrosion resistance as well as robust fixing hardware. With a high-quality bearing and safety brake, the system is designed for easy selection and installation.
Mounting Kits
GUD-MK-07Mounting kit designed for doors up to 34m²
GUD-MK-05Mounting kit designed for doors up to 18m²
Fall-arresting safety brake
Fall-arresting safety brake
Adjustable safety brake angle
Adjustable safety brake angle
10mm zinc plated steel
Flange bearing
Flange bearing
3 x mounting configurations
Separate wall angle and bracket for easier mounting
2 x mounting configurations
Thoughtfully designed scallops aid drum positioning and prevent “roll-off”
Thoughtfully designed scallops aid drum positioning and prevent “roll-off”
8mm zinc-plated steel
6
Logic Control Logic Expansion Accessories
GLMe2Steel enclosure with C10A-4 fascia panel and key switch for carpark automation Logic Expansion
Activation based on door position (relays, traffic signal etc)
Traffic Management and Warning Systems
Monitored Entrapment Protection
GLMe2LPlastic enclosure with C10A-4 fascia panel Transmitter
Management
The GLMe2 portfolio of Logic Controls provides ultimate control for U-Drive, especially in high-cycle applications such as carparks. The wall control allows commissioning at floor level, with all configurations such as door direction, limit setting, timer-to-close and transmitter management accessed at the wall.
The GLMe2 portfolio offers two variants as shown, with a wide range of access control and logic expansion features - qualities you have come to expect from Grifco.
The two designs offer incredible mounting flexibility. The door drum can be easily aligned and positioned and the operator can be mounted in multiple configurations as highlighted below. This is ideal for tight applications with low headroom or side room, common in carparks and some industrial facilities.
Mounting Configurations
Logic Control
Left Hand Configurations
Right Hand Configurations
The operator mounting plate can be angled to best suit the application
7
10%
60%
Duty Cycle
Duty Cycle
60% Duty Cycle GUD-H053M
GUD-MK-05
GUD-H073M
GUD-MK-07
Drum Diameter 168mm 168mm
Curtain Mass 14kg/m2 14kg/m2
Max. System Mass 574kg 800kg
Max. Door Size 20m2 24m2
Max. Torque 180Nm 220Nm
Max. Cycle Time 60 sec 60 sec
10% Duty Cycle GUD-H053M
GUD-MK-05
GUD-H073M
GUD-MK-07
Drum Diameter 168mm 168mm
Curtain Mass 14kg/m2 14kg/m2
Max System Mass 574kg 800kg
Max Door Size 24m2 34m2
Max Torque 180Nm 260Nm
Max Cycle Time 120 sec 120 sec
Selection TableSelect the appropriate operator and mounting kit for the application, dependent on duty cycle and door dimensions.
All calculations are based on a 168mm diameter drum. Please contact Grifco (1800 GRIFCO) for calculations based on different variables.
Door Height
2.5m 3m 3.5m 4m 4.5m 5m 5.5m 6m
Doo
r W
idth
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
3m 33 10.6 33 10.6 33 10.6 33 10.6 34 10.3 33 10.6 36 9.7 40 8.8
3.5m 33 10.6 33 10.6 33 10.6 35 10.0 40 8.8 37 9.5 42 8.3 46 7.6
4m 33 10.6 33 10.6 35 10.0 40 8.8 37 9.5 42 8.3 47 7.4 54 6.5
4.5m 33 10.6 34 10.3 40 8.8 37 9.5 42 8.3 47 7.4 N/A N/A N/A N/A
5m 33 10.6 38 9.2 44 8.0 41 8.5 46 7.6 N/A N/A N/A N/A N/A N/A
5.5m 35 10 41 8.5 39 9.0 45 7.8 N/A N/A N/A N/A N/A N/A N/A N/A
6m 38 9.2 45 7.8 43 8.1 50 7.0 N/A N/A N/A N/A N/A N/A N/A N/A
6.5m 41 8.5 50 7.0 46 7.6 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
7m 44 8.0 43 8.1 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
7.5m 38 9.2 46 7.6 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
8m 41 8.5 50 7.0 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Door Height
2.5m 3m 3.5m 4m 4.5m 5m 5.5m 6m
Doo
r W
idth
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
Dru
m S
proc
ket
Teet
h
Dru
m S
peed
Rpm
3m 33 10.6 33 10.6 33 10.6 33 10.6 34 10.3 39 9.0 44 8.0 48 7.3
3.5m 33 10.6 33 10.6 33 10.6 35 10.0 40 8.8 45 7.8 54 6.5 54 6.5
4m 33 10.6 33 10.6 35 10.0 40 8.8 46 7.6 54 6.5 60 5.8 43 8.1
4.5m 33 10.6 34 10.3 40 8.8 45 7.8 54 6.5 60 5.8 39 9.0 48 7.3
5m 33 10.6 38 9.2 44 8 50 7.0 57 6.1 43 8.1 48 7.3 54 6.5
5.5m 35 10.0 41 8.5 48 7.3 57 6.1 42 8.3 47 7.4 54 6.5 60 5.8
6m 38 9.2 45 7.8 54 6.5 60 5.8 45 7.8 54 6.5 60 5.8 N/A N/A
6.5m 41 8.5 50 7.0 57 6.1 43 8.1 50 7.0 57 6.1 N/A N/A N/A N/A
7m 44 8.0 54 6.5 41 8.5 46 7.6 54 6.5 N/A N/A N/A N/A N/A N/A
7.5m 33 10.6 37 9.5 44 8.0 50 7.0 N/A N/A N/A N/A N/A N/A N/A N/A
8m 33 10.6 40 8.8 46 7.6 54 6.5 N/A N/A N/A N/A N/A N/A N/A N/A
AU: 1800 GRIFCO | www.grifco.com.auNZ: 0800 653 667 | www.grifco.co.nzChamberlain Australia Pty LtdHead Office: Unit 1, 75 Epping Rd North Ryde NSW 2113Manufacturing: 15 Dell Rd, West Gosford NSW 2250
Chamberlain BranchesSydney: Unit 1, 75 Epping Rd North Ryde NSW 2113Melbourne: Unit 18, 85-91 Keilor Park Dr Tullamarine VIC 3043Brisbane: Unit 19, 140 Wecker Rd Mansfield QLD 4122Perth: 54 Millrose Dr Malaga WA 6090
Chamberlain New Zealand LtdAuckland: 17A Arrenway Dr, Rosedale 0632 Auckland
ORDER CODES
U-D
RIV
E 0
9-18
Your Local Grifco Professional Dealer
Logic Control with Key Switch
Logic control Reversing Starter
Control Options (not included)
GLMe2 GLMe2L RG374-LB3E007
GLMe2 GLMe2L RG374-LB3E007
Part No. Amps Hp Voltage Phase Max. Door Size
Duty Cycle
U-Drive Operator Kits | High-Cycle | Three Phase 415V
GUDK-RSO-H053M 1.45A 0.5Hp 415V 3ph 18m² HC-60
GUDK-RSO-H073M 2.0A 0.75Hp 415V 3ph 34m² LC-10
Complete kits include Operator, Wall Brackets, Operator Mounting Plate, Safety Brake & Angle, Flange Bearing, S1225 Sprocket (12B 25T), DC12B Drive Chain (12B) and Mounting Hardware. Cycle rating based on maximum rated door size.
Part No. Amps Hp Voltage Phase Max. Door Size
Duty Cycle
U-Drive Operator Kits | High-Cycle | Three Phase 415V
GUD-H053M 1.45A 0.5Hp 415V 3ph 18m² HC-60
GUD-H073M 2.0A 0.75Hp 415V 3ph 34m² LC-10Supplied with Operator Mounting Plate, S1225 Sprocket (12B 25T), DC12B Drive Chain (12B) and Mounting Hardware. Cycle rating based on maximum rated door size.
Part No. Description Max Drum Torque
Safety Brake
GSB-600 Anti-drop Safety Brake 600Nm
Part No. Description Max. Door Size
Mounting Kits
GUD-MK-05 Mounting Kit for GUD-H053M 18m²
GUD-MK-07 Mounting Kit for GUD-H073M 34m²
Kits include contents as shown to right as well as mounting hardware (not shown).
Complete Kits
Individual Components
GUDK-RSO-H053M Contents Drive Chain not shown
GUD-MK-05 Contents GUD-MK-07 Contents
GUDK-RSO-H073M Contents Drive Chain not shown