NO
N-SPA
RKING
NO
N-M
AGN
ETIC SAFETY
TOO
LSISO 9001:2000
ISO 14001:2004OHSAS 18001:1999
1
2
3
Welcome to the world of Carltsoe Safety Tools.We make your workplace Safer.If you just had the right Tools……….Manufacturing High-quality Non-sparking, Non-magnetic and Non-corrosive Carltsoe Safety Toolssince 1956. With more than 50 years of experience, Carltsoe Safety Tools is the leader of specialCopper Alloy Safety Hand Tools manufactured for use in any high risk area where a spark can create adisaster.
Carltsoe Non-Sparking Safety Tools are recommended for use where hazardous, flammable orcombustible vapors, liquids, dusts or residues are present and should be used by all industrialsafety programs. Carltsoe Non-Sparking Safety Tools are an inexpensive investment for yourcompany.
Carltsoe Non-Magnetic Safety Tools are tested according to NATO specification STANAG 2897 AnnexC, where the magnetic value is measured in Nano Teslar. This enables our Tools to be used aroundsensitive magnetic equipment, including scanners, de-mining, disarming, etc. Our Tools are NATO stocknumbered.
Carltsoe Corrosion Resistant Safety Tools are the ideal choice when working in marine and offshoreenvironments. Corrosion / rust can be extremely dangerous in hazardous environments. Impactsinvolving rust can initiate a thermal reaction which can cause an ignition in an explosive atmosphere.
It is important that the user of Carltsoe Safety Tools keeps the Tools in clean working order. Like otherpersonal protection equipment, is it each user’s duty to inspect the Tools before use.
Carltsoe offers over 3000 individual Tools made from Special Solid Copper-Based Alloyed Tools. Wemanufacture and supply our Carltsoe Safety Tools in two different alloys: Copper-Beryllium Alloy(CuBe2) and a Special Aluminium-Bronze Alloy (AlBr).
International Regulation for Work in Ex or ATEX zones demands the right equipment. Carltsoe Copper-Beryllium Tools (CuBe2) fulfill the demand in the European ATEX directive for work in Zone 0, 1 and 2(Gas, Mists or Vapors). Zones 20, 21 and 22 (Dusts). M1 and M2 for mining.Carltsoe Aluminium-Bronze Tools (AlBr) fulfill the demand in the European ATEX directive for work inZones 1 and 2 (Gas, Mists or Vapors). Zones 21 and 22 (Dusts).
Gas, Mists or VaporsZone 0 — An atmosphere where a mixture of air and flammable substances in the form of gas,vapor or mist is present frequently, continuously or for long periods.Zone 1 — An atmosphere where a mixture of air and flammable substances in the form of gas,vapor or mist is likely to occur in normal operation occasionally.Zone 2 — An atmosphere where a mixture of air and flammable substances in the form of gas,vapor or mist is not likely to occur in normal operation but, if it does occur, will persist for only ashort period.
DustsZone 20 — An atmosphere where a cloud of combustible dust in the air is present frequently,continuously or for long periods.Zone 21 — An atmosphere where a cloud of combustible dust in the air is likely to occur innormal operation occasionally.Zone 22 — An atmosphere where a cloud of combustible dust in the air is not likely to occur innormal operation but, if it does occur, will persist for only a short period.
All Carltsoe Safety Tools are laser engraved according to Ex/ATEX classifications and our own markingprocedure. ATEX guidelines will be provided upon request.
Product liability, quality control, testing and customer service are a priority at Carltsoe.Carltsoe is an ISO9001:2000 certified company, and our Tools are recommended and certified byseveral international organizations such as BVQI, DNV, Force Technologies and the Danish Navy.Carltsoe Safety Tools are continuously spark-proof tested according to our strict test procedure(CST Test).
4
Carltsoe Non-Sparking Safety Tools are recommended for use where hazardous, flammable orcombustible vapors, liquids, dusts or residues are present and should be used by all industrialsafety programs. Carltsoe Non-Sparking Safety Tools are an inexpensive investment for yourcompany.
Industries whom should consider the need ofCarltsoe Safety Tools because of it’sNon-Sparking properties:
Manufacturing Industries:Alcohol IndustriesAmmunition, Missile & Explosives PlantsAutomotive PlantsBreweries & DistilleriesChemical ManufacturingFlammable Materials ManufacturingFlour MillsFurniture Manufacturers (Varnish and Painting)Gas PlantsGlue FactoriesInk IndustriesLiquefied Petroleum Gases (LPG)MiningNuclear ProductsOil & Natural Gas Drilling, Refining & HandlingPaint, Lacquer & Varnish ProductsPaper and Pulp MillsPetrochemicalsPetroleum RefiningPharmaceutical IndustriesPipeline Construction & MaintenancePlastic ManufacturingSugar MillsSynthetic Fiber ManufacturingWine Industries
Transportation Industries and their Maintenance,Cleaning & Service Companies:
AirportsRailroadsShipyardsTankersTanker TrucksVesselsWorkboats
Governmental Agencies:Aircraft and Missile PlantsAirport (Refueling & Maintenance Operations)Armed Forces (Army, Navy, Air Force, Marine,Cost Guard & Civil Support Units)Chemical, Biological, Radiological,Nuclear or Explosives LogisticalSupport Operational Equipment.Fire Departments, Military BasesFirst Responders to Weapons of Mass Destruction,Firefighters, Public Safety Bomb Squads &Local Rescue SquadsHazardous Materials Handling & Clean-UpMunitions DepotsNuclear Production and WastePublic Utilities: Gas, Electric & TelecommunicationWaste ManagementWater Treatment Facilities
Other Industries:Cleaning & Spraying OperationsConfined Space MaintenanceExplosive & PyrotechnicsGeophysical ExplorationGrain Storage & HandlingHazardous Material HandlingMaintenance & Service OperationsPaint Spraying, Finishing and Booth OperationsPacking PlantsPropane Distributors & Bulk PlantsWarehousing of all Hazardous Materials
Industries whom should consider the need ofCarltsoe Safety Tools because of it’sNon-Magnetic properties:
Aircraft Maintenance & OverhaulAluminium & Other Metal SmeltingElectronics ManufacturersHospitals & Clinics Magnetic Resonance ImagingMRI- MaintenanceMine SweepersNuclear Products & Testing MachinesPrecision Magnetic EquipmentPublic Utilities: Gas, Electric & TeleRadar Transmission Centers
Industries whom should consider the need ofCarltsoe Safety Tools because of it’sCorrosion Resistant properties:
Boat OwnersChemical ManufacturingDesalinization PlantsFood product ManufacturingLaboratoriesPaper & Pulp MillsPetrochemicalsPharmaceutical IndustryPlastic ManufacturingShipyardsTankers, Vessels & Other Work BoatsWine Industry
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
Advanced forging technology ensures all of our products
Cleaning the furnace
Checking the furnace
Lighting Sealing the openingof the furnace
Blowing
Burden
Prefabricating
Remolding precisely
Testing
The liquid forging technology procedures are:
7
Files, Scissors, SawHalf Round FileRound FileHand FileTinner's Snip Plate ShearScissorsScissors
KnifeKnifeKnifePutty Knife
Hand SawHack Saw Frame
Hack Saw Blade
ShovelsScoopShovelShovel, Round PointEdging Spade
BrushesBrush
BrushWheel BrushCup Brush
Clamps andAdditional Tools
Tweezers, Standard TypeTweezers, Sharp Type"G" Clamp Earthing Clamp
Marking ToolCaulking ToolCaulking ToolCrowbarWrecking BarScraper, Pick and ScalersCarbide Drum Opener
WedgeAngle Tracing PointTri SquareRulerRakeForkHoe
PickBucketShacklePipe CutterChain Hoist
Toolkit
MENU
8
WrenchesAdjustable End WrenchRatchet WrenchAdjustable Hook SpannerHook SpannerWrench, Striking Open EndWrench, Striking BoxWrench, Single End Box
Double Open End WrenchSingle Open End Wrench
Double Box End Wrench, Straight Type
Box Wrench For ExtensionExtension For Box WrenchCombination Wrench
Valve Wheel HookValve SpannerValve Spanner, Special
Gas Tube SpannerBung WrenchBung WrenchBung WrenchBung Wrench, Universal
PliersAdjustable Pipe WrenchChain Pipe WrenchPipe Pliers, Swedish TypeWater Pump PliersLineman's Pliers, Side CuttingDiagonal Cutting PliersDiagonal Cutting Pliers, Heavy DutyLong Nose PliersRound Nose PliersFlat Nose PliersCombination Pliers, Slip JointPincersPipe PliersParallel Vice
HammersBall Peen HammerCross Peen HammerDouble Face Machinist's HammerMachinist's HammerSledge HammerSledge Hammer, German Type
Scaling Hammer
Stone WedgeBricklayer's HammerClaw HammerPlastic HammerOrate OpenerAxe
Hatchet
PunchesCenter PunchCylindrical DriftDrift Pin, Straight TypePin Punch
ChiselsFlat ChiselCross Cutting Chisel
Point Chisel - 6 PointBull Point
Sockets andAccessories
Socket 1/2 "ConverterUniversal JointExtension Bar
Speed HandleSliding Tee
Hinged HandleRatchet SpannerRatchet Spanner
ScrewdriversHexagonal Head WrenchLong Arm Hex. Key, Ball EndFlat Type ScrewdriverCross Slot Screwdriver
Wrench - Socket "L"Wrench - Socket "T"
ScrapersFlat ScraperAngle ScraperAngle ScraperHoe ScraperDeck ScraperLong Blade ScraperTriangular ScraperPlate Scraper
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
Carltsoe Round Corner ShapeAll Box/Ring Ended Carltsoe Tools,are manufactured with Carltsoe’s Round Corner.Carltsoe’s Round Corner design prevents damage to the bolt head.Very high tensile strength due to the design of the Carltsoe Round Corner.
7
Ex208S
Ex501 6"8"10"12"15"18"24"
Ex501-6Ex501-8Ex501-10Ex501-12Ex501-15Ex501-18Ex501-24
Adjustable End Wrench
No. Lmm L" Be Al
155205255305380455605
130225356657139221653939
112217342593125318623384
Ex504Ratchet Wrench
Ex504-9Ex504-11Ex504-13Ex504-14Ex504-17Ex504-19Ex504-22Ex504-24Ex504-27Ex504-30Ex504-32Ex504-36Ex504-41
No. S L B H Be Al
9111314171922242730323641
155215215215215260260260260390390505505
30333536394244485055586267
68810101212141415151616
1664193021182487277630693294349840904470500152745587
1430165818202137238526372830300535143840429745314800
Adjustable Hook Spanner200538780
No. L B A H Be Al
Ex208S-32/75Ex208S-50/120Ex208S-115/170
32/7550/120115/170
205285310
610.514.9
34.57
101420
172462670
Adjustable EndW
renchRatchetW
renchAdjustable H
ook Spanner
L
S
L
H
B S
L
H
B A
8
Ex208
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
9
L
H
B A
24 34 64 87 146 163 174 264 331 353 512 577 684 738 782 849 870
Hook Spanner
No. L B A H Be Al
Ex208-12/14Ex208-16/20Ex208-25/28Ex208-30/32Ex208-34/36Ex208-40/42Ex208-45/50Ex208-52/55Ex208-58/62Ex208-68/75Ex208-80/90Ex208-90/100Ex208-95/100Ex208-100/110Ex208-110/115Ex208-120/130Ex208-135/145
12/1416/2025/2830/3234/3640/4245/5052/5558/6268/7580/9090/10095/100100/110110/115120/130135/145
105108130168168180205205235255280305305330330340350
4.615.627.196.786.728.7911.3711.8712.9312.9812.0412.5815.2712.6219.0320.0818.24
23455556688101010121212
666778881013991010788
28 40 74 101 170 190 202 307 392 412 596 671 796 859 910 988 1012
Ex200 No. L B H Be AlEx200-17Ex200-19Ex200-22Ex200-24Ex200-27Ex200-30Ex200-32Ex200-36Ex200-41Ex200-46Ex200-50Ex200-55Ex200-60Ex200-65Ex200-70
Wrench, Striking Open End171922242730323641465055606570
140140150160180190195210225255280310320350375
374249535866687890100110120130141151
151517171718182020222225252830
3003454004626847307769041584187620452564342944006835
34940146653879685090310521844218423802984399151537956
L
H
SB 15
DIN 133
AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZE IN METRICAND INCH.
Ex201B
10
No. L D H Be Al
Wrench, Striking BoxEx201B-27Ex201B-30Ex201B-32Ex201B-36Ex201B-41Ex201B-46Ex201B-50Ex201B-55Ex201B-60Ex201B-65Ex201B-70Ex201B-75Ex201B-80Ex201B-85Ex201B-90Ex201B-95Ex201B-100
27303236414650556065707580859095100
180190195205225240250270270290320335345365400400400
475454606675808894101110117123131152152152
1718182022242526282933343537424242
3175185456031115119412421291143817112456318940864907573961696227
272445468518958102610671109123514702118274035104216493053005350
Ex201 No. L D H Be Al
Wrench, Single End BoxEx201-27Ex201-30Ex201-32Ex201-36Ex201-41Ex201-46Ex201-50Ex201-52Ex201-55Ex201-56Ex201-57Ex201-60Ex201-65Ex201-67Ex201-70Ex201-75Ex201-80
2730323641465052555657606567707580
210210210225240255265280280280290290315315330340360
4451515560667178787885859393100105118
12131314151616.517171717.517.518.518.5192020.5
209321396680860105112481309134813901403147715281612165524602819
18027637358080090310721124115811971205127813131385142221142422
L
D S
H
Wrench,Striking
BoxW
rench, Single End Box
DIN 7444
Hook Spanner
Wrench,Striking O
pen End
L
D S
H
AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.
AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.
Ex201F
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
11
No. L D H Be Al
Ex205 No. L B H Be Al
Single Open End Wrench
Ex201F-27Ex201F-30Ex201F-32Ex201F-36Ex201F-41Ex201F-46Ex201F-50Ex201F-55Ex201F-60Ex201F-65
27303236414650556065
155155155170185210210220225230
43475056647177808590
20.720.722.624.626.627.628.83031.533
4555207611066131118382596334541271948
391447654916112615792230287435464251
Ex205-6Ex205-7Ex205-8Ex205-9Ex205-10Ex205-11Ex205-14Ex205-17Ex205-19Ex205-22Ex205-24Ex205-27Ex205-30Ex205-32Ex205-36Ex205-41Ex205-46Ex205-50Ex205-55Ex205-60Ex205-65
67891011141719222427303236414650556065
9090110110110115125140170195195230235290305340360380400430460
20212123.524.527.533404449.5516165.569788597103114125132
4555555.567899.810.911.812.813.81515.816.817.718.7
293539495872811001081563003113784456407459161133145019091969
253034425062708693134258267325382550640787974124616401692
L
H
SB 15O
L
D S
H
AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.
AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.
12
No. L B1 B2 H Be AlEx203Double Open End Wrench
Ex203-67Ex203-68Ex203-78Ex203-79Ex203-89Ex203-810Ex203-910Ex203-911Ex203-1011Ex203-1012Ex203-1013Ex203-1014Ex203-1114Ex203-1213Ex203-1214Ex203-1315Ex203-1417Ex203-1617Ex203-1618Ex203-1719Ex203-1819Ex203-1722Ex203-1922Ex203-2022Ex203-1924Ex203-2123Ex203-2224Ex203-2227Ex203-2426Ex203-2427Ex203-2528Ex203-2730Ex203-2732Ex203-3032Ex203-3036Ex203-3236Ex203-3436Ex203-4146
6 x 76 x 87 x 87 x 98 x 98 x 109 x 109 x 1110 x 1110 x 1210 x 1310 x 1411 x 1412 x 1312 x 1413 x 1514 x 1716 x 1716 x 1817 x 1918 x 1917 x 2219 x 2220 x 2219 x 2421 x 2322 x 2422 x 2724 x 2624 x 2725 x 2827 x 3027 x 3230 x 3230 x 3632 x 3634 x 3641 x 46
122122140140140140140157157157172172172172172190205205205222222236236236250250250260260260280302302302328328328400
17.517.518.518.521.521.521.524.524.524.524.529292929333336.536.539.539.544444449.549.549.554.554.554.5565965.565.569697385
18.518.521.521.524.524.524.529292931.53333333335.539.541.541.5444449.549.549.554.554.554.56161616165.5696977777797
3.73.7444444.54.54.5555555.56666.56.57777.57.57.58888.59999.49.49.410.7
272834354445467071728717317417517628032341341444544657157257367567667775375475576978285385478595710231478
23242930383940606162751481491501512412773553563823834904914925805815826476486496616717337347828228791270
H
LB1 S1 15O
B2S2
DIN 3110
Double O
pen EndW
rench
AVAILABLE IN LAGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
13
No. L D1 D2 H Be AlEx202S Ex202S-5.57Ex202S-67Ex202S-78Ex202S-89Ex202S-810Ex202S-911Ex202S-1011Ex202S-1012Ex202S-1113Ex202S-1213Ex202S-1214Ex202S-1314Ex202S-1415Ex202S-1317Ex202S-1417Ex202S-1617Ex202S-1719Ex202S-1819Ex202S-1922Ex202S-2022Ex202S-2123Ex202S-1924Ex202S-2224Ex202S-2427Ex202S-2528Ex202S-2430Ex202S-2730Ex202S-3032Ex202S-3036Ex202S-3236Ex202S-3641Ex202S-3841Ex202S-4146Ex202S-4650
5.5 x 76 x 77 x 88 x 98 x 109 x 1110 x 1110 x 1211 x 1312 x 1312 x 1413 x 1414 x 1513 x 1714 x 1716 x 1717 x 1918 x 1919 x 2220 x 2221 x 2319 x 2422 x 2424 x 2725 x 2824 x 3027 x 3030 x 3230 x 3632 x 3636 x 4138 x 4141 x 4646 x 50
140140150150150170170170190190190190210210210240240240255255280280280310325325325325350350390390435475
13131616161818182121212124242428282831313535354042424247505059596471
14141818182020202424242428282831313135353838384446464650505664647177
77888999910101013131314141415151616161819191920202224252527
26404958636772871011101261561892132412512653053634174684985149225816008108228499851144135514011613
22344250545862758795108134162183207216228262312359402428442792499516696706729846983116412041386
L
S1D1 S2 D2
H
H
AVAILABLE IN LARGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.
14
No. L D1 D2 H1 H2 Be AlEx202F Ex202F-67Ex202F-89Ex202F-810Ex202F-911Ex202F-1011Ex202F-1012Ex202F-1114Ex202F-1213Ex202F-1214Ex202F-1314Ex202F-1315Ex202F-1415Ex202F-1417Ex202F-1617Ex202F-1618Ex202F-1719Ex202F-1819Ex202F-1922Ex202F-1924Ex202F-2022Ex202F-2123Ex202F-2224Ex202F-2227Ex202F-2426Ex202F-2427Ex202F-2430Ex202F-2528Ex202F-2729Ex202F-2730Ex202F-2732Ex202F-3032Ex202F-3036Ex202F-3236Ex202F-3641
6 x 78 x 98 x 109 x 1110 x 1110 x 1211 x 1412 x 1312 x 1413 x 1413 x 1514 x 1514 x 1716 x 1716 x 1817 x 1918 x 1919 x 2219 x 2420 x 2221 x 2322 x 2422 x 2724 x 2624 x 2724 x 3025 x 2827 x 2927 x 3027 x 3230 x 3230 x 3632 x 3636 x 41
170180195195195210210210210225225225245245265265265285305285305305325325325345345370370370370400400440
12141717172121212124242426262828283334333436393939394143434348515157
13161919192222222225252528283131313637363739434343484445485151575764
67.28.58.58.59.59.59.59.510.810.810.811.811.812.512.512.513.51413.51414.5151515151516161617181820
6.889.59.59.510.510.510.510.511.511.511.512.512.513.213.213.214.514.514.514.5151616161716.517171818202021
4047566193100102109114131138161211236255285304323359399498505527543554558567580597614642744803877
344148528086889498113119138145157161176184206251292334352371394427451483510534549576640690754
H1
H2
S2 D2S1D1LDIN 838
AVAILABLE IN LARGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
15
L
H
D S
L
H
SD
h1
Ex204S No. L D H Be Al
Ex204S-22Ex204S-24Ex204S-27Ex204S-30Ex204S-32Ex204S-36Ex204S-38Ex204S-41Ex204S-44Ex204S-46Ex204S-50
2224273032363841444650
355355405405405455455455505505555
3740434852586164677178
1516171819202122232426
26032535952367098911021182134615221687
2242793084495768509471016115613081449
Ex215No. L D H h1 Be Al
Ex215-30Ex215-32Ex215-33Ex215-34Ex215-35Ex215-36Ex215-37Ex215-38Ex215-41Ex215-42Ex215-46Ex215-47Ex215-50
30323334353637384142464750
200235235235245245250250265265280280290
47515151545456566262696976
34343434353537373939404042
19191919202021212222232325
9439679861003101710351076114812601440161016831767
81083184786287488992498610831237138314461518
Box Wrench For Extension
Ex216 No. L 1 Brass
Ex216-22Ex216-25Ex216-30
600750850
263035.8
222530
757 1339 2307Extension For Box Wrench
AVAILABLE IN LARGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.
AVAILABLE IN LARGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.
2
Ex207F No. L1 L2 Be Al
16
No. L B D H1 H2 S Be AlEx206 Ex206-6Ex206-7Ex206-8Ex206-9Ex206-10Ex206-11Ex206-12Ex206-13Ex206-14Ex206-15Ex206-16Ex206-17Ex206-18Ex206-19Ex206-20Ex206-21Ex206-22Ex206-24Ex206-25Ex206-26Ex206-27Ex206-28Ex206-29Ex206-30Ex206-32Ex206-36Ex206-38Ex206-41Ex206-42Ex206-46Ex206-50Ex206-55Ex206-60Ex206-65Ex206-70
678910111213141516171819202122242526272829303236384142465055606570
100110120130140150160170180190200210220230240252262282330330330320330340380460460475475500550570570570570
17.218.520.823242728.5313335.536.539.541.54445.54749.554.56262626165.565.5697784888896105114122132142
10.51314161719212224252628303133343639414141444548515759636370768492102112
44455556666777891011138.28.58.88.899.510.5151717181920222323
67789991010111112121213131416181515.51616.5171820242626283031333434
2733374454711001281391581622062112584204274435105285776206417448709591160134515271754207722432631287530383312
24293238466186109121136139170182224361367381438454496533551639748824997115613121507178519272261247026102846
Combination Wrench
L
SB
S D
H1 h2
15O
Combination
Wrench
ValveW
heel Hook
L1S
L2
Ex207F-30300Ex207F-40400Ex207F-50500Ex207F-60600Ex207F-70700Ex207F-80800
304050607080
300400500600700800
4356698295108
58210121220157818312176
5008761048135615731870
Valve Wheel Hook
DIN 3113
AVAILABLE IN LARGER AS WELL ASINTERMEDIATE SIZES IN METRICAND INCH.
Ex207 No. L1 L2 Be Al
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
17
L1S
L2
Valve SpannerEx207-32Ex207-36Ex207-41Ex207-50
32364150
250272300320
515355.560
535 751 919 1130
460645790971
Ex212 No. L Be Al
Gas Tube SpannerEx212-51Ex212-76
5176
540590
15472056
13291766
Ex207S No. L Be Al
Valve Spanner, SpecialEx207S-76178Ex207S-203381Ex207S-406508
76/178203/381406/508
215400490
4588601745
3937391499
Ex110No. L Be Al
Ex110ESNo. L Be Al
Ex213
Ex110SNo. Be Al
No. S L1 L2 Be Al
18
Ex110-395 395 2077 1785
Ex110ES-385 385 776 667
Ex110S-385 385 1817 1561
L1
L2
S
Bung Wrench
Bung Wrench
Bung WrenchEx213-22Ex213-24Ex213-27Ex213-32
22242732
255255310310
708090100
1048116422112677
900100019002300
Bung Wrench, Universal
Valve SpannerValve Spanner, Special
GasTube Spanner
BungW
renchBung
Wrench
BungW
renchBung
Wrench, U
niversal
L
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndAd
ditio
nalT
ools
Tool
kit
19
Ergonomic HandlesErgonomic two-component handle on all Carltsoe Pliers.Maximum Handgrip prevents slipping.Unique handle design for Safety Tools.
20
Ex502 No. Lmm L Be Al
Ex502-8Ex502-10Ex502-12Ex502-14Ex502-18Ex502-24Ex502-36Ex502-48
2002503003504506009001200
436897.5128415382571407648505461
5051047146617502993475756456356
8"10"12"14"18"24"36"48"
Adjustable Pipe Wrench
Ex600Chain Pipe Wrench
Ex600-50 600 50 989 850Ex600-100 600 100 1599 1374Ex600-150 600 150 2158 1854
No. L Be Al
Ex505Pipe Pliers, Swedish Type
Ex505-1.5 1-1/2" 420 1650 1418Ex505-2 2" 550 3282 2860
No. S Be Al
Ex604 Ex604-10 250 10" 368 316Ex604-12 300 12" 718 617Water Pump Pliers
No. Lmm L Be Al
AdjustablePipe
Wrench
ChainPipe
Wrench
PipePliers,Sw
edishType
WaterPum
pPliers
L
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
21
Ex612-6 150 6" 250 215Ex612-8 200 8" 396 340
Ex612Lineman's Pliers, Side Cutting
No. Lmm L Be Al
Ex601-6 160 6" 278 239Ex601No. Lmm L Be Al
Diagonal Cutting Pliers
Ex601SNo. Lmm L Be Al
Diagonal Cutting Pliers, Heavy DutyEx601S-7 185 7" 189 162
Ex611-7 180 7" 196 168Ex611No. Lmm L Be Al
Long Nose Pliers
Ex607 No. Lmm L Be AlEx607-6 150 6" 136 116
Round Nose Pliers
Ex601-8 200 8" 378 339
22
Ex606No. Lmm L Be Al
Ex605No. Lmm L Be Al
Ex603No. Lmm L Be Al
Ex602No. Lmm L Be Al
Ex902No. S Al
Flat Nose PliersEx606-6 150 6" 169 145
Pincers
Ex605-8 200 8" 258 228
Combination Pliers, Slip Joint
Ex603-7 180 7" 455 391
Pipe PliersEx602-8 210 8" 422 408
Ex902-4 4" 1273Ex902-5 5" 1652Parallel Vice
Flat Nose Pliers
Combination
Pliers, Slip JointPincersPipe
PliersParallelVice
Lineman's
Pliers, Side CuttingD
iagonalCuttingPliers
DiagonalCutting
Pliers, Heavy
Duty
Long Nose Pliers
Round Nose Pliers
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
23
Carltsoe Striking ToolsFiberglass Handle or Wood Handle / Your choice.Drop Forging ensures a long life time.
24
Ex101Ball Peen Hammer
No. Ex101-0200 Ex101-0500 Ex101-0700 Ex101-0900
200 500 700 900
Ex102Cross Peen Hammer
No. Ex102-0500 Ex102-0900
500 900
Ex103Double Face Machinist's Hammer
No. Ex103-0300 Ex103-0500 Ex103-0900
300 500 900
Ex1041 No. Ex1041-0100 Ex1041-0200 Ex1041-0300 Ex1041-0500 Ex1041-0800
100 200 300 500 800Machinist's Hammer
Ex104 No. Ex104-0500 Ex104-1000 Ex104-1500 Ex104-2000 Ex104-2500
500 1000 1500 2000 2500
No. Ex104-3000 Ex104-4000 Ex104-5000 Ex104-8000 Ex104-10000
3000 4000 5000 8000 10000
Sledge Hammer
BallPeen Ham
mer
CrossPeen H
amm
erD
oubleFace
Machinist's H
amm
erM
achinist's Ham
mer
Sledge Ham
mer
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
25
Ex112
Ex105
Ex106
Ex107
Scaling Hammer
Stone Wedge
Bricklayer's Hammer
No. Ex105-1300 Ex105-2100
1300 2100
No. Ex106-0200 Ex106-0400 Ex106-0600 Ex106-0900
200 400 600 900
No. Ex107-1000
1000
No. Ex112-0600 Ex112-0800
600 800
Ex6475Sledge Hammer,German Type
No. Ex6475-0500 Ex6475-1000 Ex6475-1500 Ex6475-2000 Ex6475-3000
500 1000 1500 2000 3000
No. Ex6475-4000 Ex6475-5000 Ex6475-6000 Ex6475-7000 Ex6475-8000
4000 5000 6000 7000 8000
No. L Be Al
No. L Be Al
No. L Be Al
26
Ex122Claw Hammer
Ex121Plastic Hammer
Ex114SOrate Opener
Ex1201Axe
Ex1202Hatchet
No. Ex122-0500 Ex122-0700
500 700
No. Ex121-0800
800
Ex114S-230 230 524 450
Ex1201-100 100 1658 1424
Ex1202-85 85 1111 955
Claw H
amm
erPlastic H
amm
erO
rate Opener
Axe
Hatchet
Ex301C
Ex301O
Ex301
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
27
Ex301O-10 10 110 4 46 40Ex301O-12 12 115 6 100 86Ex301O-14A 14 120 7 136 117Ex301O-14B 14 120 8 207 178Ex301O-16 16 145 10 239 205Ex301O-18 18 160 12 283 243Ex301O-20 20 180 14 334 287Ex301O-24 24 200 16 385 331Ex301O-30 30 225 18 442 380Ex301O-32 32 225 20 533 458Ex301O-40 40 250 32 604 519
No. L Be Al
Ex301-10 100 10 50 43Ex301-12 150 12 74 64Center Punch
Cylindrical Drift
No. S L Be Al
Ex301C-2 2 150 10 42 36Ex301C-3 3 150 10 51 44Ex301C-4 4 150 10 68 58Ex301C-5 5 150 10 74 64Ex301C-6 6 150 10 94 81Ex301C-7 7 150 12 113 97Ex301C-8 8 150 12 147 126Ex301C-9 9 150 14 191 164Ex301C-10 10 150 14 223 192Ex301C-11 11 150 16 267 229Ex301C-12 12 150 16 279 240Ex301C-13 13 150 18 331 285Ex301C-14 14 150 18 362 311Ex301C-15 15 200 20 404 347Ex301C-16 16 200 20 449 386Ex301C-17 17 200 22 505 434Ex301C-18 18 200 22 550 473Ex301C-19 19 250 24 590 507Ex301C-20 20 250 24 715 614Ex301C-21 21 250 26 804 691Ex301C-22 22 250 26 975 838
No. S L Be Al
Drift Pin, Straight Type
L
L
S
L
S
28
Ex304 No. A L H Be Al
Ex304-150 22 150 12 334 287Ex304-200 22 200 12 383 360Ex304-250 24 250 12 629 540Ex304-400 27 400 13 1005 863
Flat Chisel
Ex305 No. L Be Al
Cross Cutting ChiselEx305-150 150 213 183Ex305-200 200 294 253Ex305-300 300 733 630
Ex309Diamont Chisel
No. L Be Al
Ex309-200 200 10 473 407Ex309-250 250 11 543 466Ex309-300 300 12 1206 882Ex309-400 400 13 1231 1058
Ex306Bull Point
No. L Be AlEx306-200 200 10 256 220Ex306-250 250 12 430 370Ex306-300 300 14 563 484Ex306-400 400 16 839 721
PinPunch
Flat ChiselCross
Cutting ChiselPoint Chisel - 6 PointBullPoint
CenterPunchCylindrical D
riftD
riftPin,StraightType
Ex301P Ex301P-1.4 1.4 110 10 24 21Ex301P-1.8 1.8 110 10 44 38Ex301P-2.4 2.4 110 10 60 50Ex301P-2.8 2.8 110 10 73 63Ex301P-3 3 110 10 94 81Ex301P-4 4 120 10 125 107Ex301P-5 5 130 12 164 141Ex301P-6 6 140 12 218 187Ex301P-8 8 150 14 283 243
No. S L Be Al
Pin Punch
L
S
L
A
H
L
L
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
29
Carltsoe Sockets are manufactured with a Round Corner.Drop forged for high strength.Designed according to DIN Standard.
Ex1503B
Ex1509
No. L D1 D2 t Be Al
No. S Be Al
30
Ex1503B-7 7 38 12.5 23 18.5 75 64Ex1503B-8 8 38 13 23 18.5 77 66Ex1503B-9 9 38 14.3 23 18.5 79 68Ex1503B-10 10 38 15.5 23 18.5 79 68Ex1503B-11 11 38 16.7 23 18.5 79 68Ex1503B-12 12 38 18 23 18.5 80 69Ex1503B-13 13 38 19.2 23 18.5 76 66Ex1503B-14 14 38 20.5 23 18.5 79 68Ex1503B-15 15 38 21.7 23 18.5 84 72Ex1503B-16 16 38 23 23 18.5 87 75Ex1503B-17 17 38 25 25 18.5 102 88Ex1503B-18 18 38 26 26 18.5 114 98Ex1503B-19 19 38 27 27 18.5 111 95Ex1503B-20 20 38 28.2 24 19.5 102 88Ex1503B-21 21 38 29.2 24 19.5 114 98Ex1503B-22 22 38 30.5 25 19.5 126 108Ex1503B-23 23 38 25 32.2 19.5 132 113Ex1503B-24 24 38 26 33 19.5 140 120Ex1503B-26 26 38 28 35.7 19.5 163 140Ex1503B-27 27 40 29 36.7 24 178 153Ex1503B-28 28 40 30 38.2 24 210 180Ex1503B-30 30 40 31 40.5 24 213 183Ex1503B-32 32 40 32 43 24 234 200
Ex1509-1234 1/2"-3/4" 193 166Ex1509-3412 3/4"-1/2" 193 166Ex1509-341 3/4"-1" 298 256Ex1509-134 1"-3/4" 298 256Ex1509-1112 1"--1-1/2" 475 408Ex1509-1121 1-1/2"--1" 475 408
Converter
Socket 1/2 "Converter
Socket 1/2 "
AVAILABLE WITH1/4” - 1/2” - 3/4” - 1” DRIVEAS WELL AS IMPACT
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
31
Ex1507 No. S Be Al
Universal JointEx1507-12 1/2" 405 340Ex1507-34 3/4" 605 520Ex1507-1 1" 1377 1183
Ex1504No. S L Be Al
Ex1504B-100 1/2" 100 201 173Ex1504B-200 1/2" 200 420 362Ex1504B-250 1/2" 250 570 489Ex1504C-100 3/4" 100 217 186Ex1504C-200 3/4" 200 403 346Ex1504C-250 3/4" 250 563 484Ex1504D-100 1" 100 437 375Ex1504D-250 1" 250 871 748
Extension Bar
Ex1508 No. S Be Al
Ex1508B 1/2" 419 360Ex1508C 3/4" 938 806Ex1508D 1" 1226 1054
Ex1505 No. S L Be Al
Ex1505B 1/2" 380 525 451Ex1505C 3/4" 380 930 799Ex1505D 1" 380 1132 973Speed Handle
32
Ex1502No. S L Be Al
Sliding TeeEx1502BS 1/2" 260 360 310Ex1502B 1/2" 320 500 430Ex1502CS 3/4" 260 920 790Ex1506C 3/4" 450 1638 1407Ex1506D 1" 300 2271 1951
Ex1506Hinged Handle
Ex1506BS 1/2" 275 563 484Ex1506B 1/2" 380 990 851Ex1506C 3/4" 380 1197 1029Ex1506D 1" 380 1522 1308
No. S L Be Al
Ex1501SRatchet Spanner
Ex1501SB 1/2" 260 617 530Ex1501SC 3/4" 390 1467 1260
No. S L Be Al
Ex1501 Ex1501A 1/4" 150 332 285Ex1501B 1/2" 260 427 367Ex1501C 3/4" 390 667 573Ex1501D 1" 510 1001 860
Ratchet Spanner
No. S L Be Al
SlidingTee
Hinged H
andleRatchet SpannerRatchet Spanner
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
33
Ergonomic HandlesErgonomic two-component handle on all Carltsoe Screwdrivers.Maximum Handgrip prevents slipping.Unique design for Safety Tools.
34
Ex209-1.5 1.5Ex209-2 2Ex209-2.5 2.5Ex209-3 3Ex209-4 4 70 120 25 14 12Ex209-5 5 80 130 28 20 18Ex209-6 6 90 145 32 39 33Ex209-7 7 95 155 34 47 41Ex209-8 8 100 160 36 68 59Ex209-9 9 106 175 38 84 72Ex209-10 10 112 182 40 110 95Ex209-11 11 118 188 42 148 127Ex209-12 12 125 200 45 184 158Ex209-14 14 140 230 56 289 248Ex209-17 17 160 250 63 477 410Ex209-19 19 180 280 70 654 562Ex209-22 22 200 300 80 1092 938Ex209-24 24 224 330 90 1354 1163Ex209-27 27 250 350 100 1908 1639Ex209-30 30 275 370 110 2479 2130Ex209-32 32 315 390 125 3011 2587Ex209-36 36 355 440 140 3689 3169
Ex209
Ex209L Ex209L-3 3 63 110 20 12 10Ex209L-4 4 70 120 25 26 22Ex209L-5 5 80 130 28 42 36Ex209L-6 6 90 145 32 63 54Ex209L-7 7 95 155 34 112 96Ex209L-8 8 100 160 36 144 124Ex209L-10 10 112 182 40 170 146Ex209L-11 11 118 188 42 338 290
No. L LL H Be Al
No. L LL H Be Al
Hexagonal Head Wrench
Hexagonal H
eadW
renchLong
Arm
Hex. Key, Ball End
Long Arm Hex. Key,Ball End
Ex801Flat Type Screwdriver
Ex803
Ex802
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
35
No. A Be
No. A Be
No. S Be
Ex801-350 3 50Ex801-4100 4 100Ex801-4150 4 150Ex801-6100 6 100Ex801-8150 8 150Ex801-10200 10 200Ex801-10300 10 300
Cross Slot ScrewdriverEx803-0 0 60 3 39Ex803-1 1 80 5 48Ex803-2 2 100 6 58Ex803-3 3 150 8 141Ex803-4 4 200 10 194
Ex802-4 4.0 12.5 1397
DIN 5262
Ex702-9 9 170 198 170Ex702-11 11 170 360 310Ex702-14 14 170 430 370Ex702-17 17 230 483 415Ex702-19 19 230 549 472Ex702-22 22 260 587 505Ex702-24 24 260 636 546Ex702-27 27 260 718 617
Ex702 No. S Be Al
Wrench - Socket "T"
36
Ex701No. S L1 L2 D Be Al
Wrench - Socket "L"
Wrench - Socket "L"
Wrench - Socket"T"
Ex701-8 8 107 37 14 110 95Ex701-9 9 107 37 16 126 108Ex701-11 11 116 37 18 161 138Ex701-14 14 116 37 22 180 155Ex701-17 17 211 52 26 316 271Ex701-19 19 211 52 28 336 289Ex701-22 22 211 57 32 372 320Ex701-24 24 240 57 35 421 362Ex701-27 27 240 57 39 482 414
L1
L2
D
L
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
37
Special Designs are made upon customer demand.
You don't see it.......we will make it
38
Ex401
Ex402
Ex402B
Ex407B
Flat Scraper
FlatScraperAngle
ScraperAngle
ScraperHoe
Scraper
Ex401-18 18 300 7 404 347Ex401-30 30 300 7 539 463
No. A L H Be Al
No. A L1 L2 Be Al
No. A L1 L2 Be Al
No. A L Be Al
Angle Scraper
Angle Scraper
Ex402-25 25 300 45 423 364
Hoe Scraper
Ex402B-50 50 300 40 554 476
Ex407B-75 75 115 217 186
A.W
renc
hes
E.Pl
iers
F.Ham
mer
sH
.Pun
ches
M.C
hise
ls
C.So
cket
s an
d Ac
cess
orie
sG
.Scr
ewdr
iver
sJ.S
crap
ers
L.Fi
les,
Scis
sors
,Saw
N.S
hove
lsK.
Brus
hes
P.Cla
mps
and
Add
ition
alTo
ols
R.To
olki
t
39
Ex405No. A L H Be Al
Deck ScraperEx405-75 75 150 26 288 248Ex405-125 125 235 43 986 847
Ex407No. A L Be Al
Long Blade ScraperEx407-60 60 185 509 437Ex407-100 100 225 1126 967Ex407-125 125 225 2031 1745Ex407-150 150 180 2790 2397
Ex403 No. L Be Al
Triangular ScraperEx403-380 380 307 264
Ex406 No. A L Be Al
Plate ScraperEx406-60 60 185 1030 885
40
Ex411Half Round File
No. L Be Al
Ex411-200 200 248 248
Ex411RNo. L Be Al
Ex411R-200 200 333 286Ex411R-250 250 404 347Round File
Deck
ScraperLong Blade Scraper
TriangularScraperPlate
Scraper
HalfRound
FileRound
FileH
andFile
Tinner's Snip Plate ShearScissors
Ex608No. L Be Al
Ex608-275 275 534 458
Tinner's Snip Plate Shear
Ex609No. L Be Al
ScissorsEx609-225 225 328 281
Ex411FNo. L Be Al
Hand FileEx411F-200 200 208 179Ex411F-250 250 510 439Ex411F-300 300 686 589
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
41
Ex409No. L L1 Be Al
KnifeEx409-106 185 106 83 71
KnifeEx410
No. L L1 Be Al
Ex410-250 250 130 78 67
Ex410SKnife
Ex410S-180 180 80 59 51
No. L L1 Be Al
Ex609SNo. L Be Al
ScissorsEx609S-210 210 315 270
42
Putty Knife
Ex118BNo. L Be Al
Hack Saw BladeEx118B-300 300 26 22
Ex119No L Be
Hand SawEx119-680 680 539
Ex118ANo L
Hack Saw FrameEx118A-385 385 543
No L B Be AlEx408 Ex408-25 200 25 66 57
Ex408-50 200 50 85 74Ex408-100 200 100 154 132
ScissorsKnifeKnifeKnife
PuttyKnife
Hand
SawH
ackSaw
Frame
Hack
Saw Blade
Hack Saw Frame
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
43
TechnologySheet pressing for shovels.Digging Tools Design according to international standard.
Ex1004No. L B Be Al
Ex1005Shovel
Ex1006Shovel, Round Point
Ex1007Edging Spade
44
ScoopEx1004-120 200 120 876 746
Ex1005-250 300 250 1405 1207
No. L B Be Al
No. L B Be Al
No. L B Be Al
Ex1006-243 300 243 1989 1709
Ex1007-195 290 195 1725 1482
ScoopShovelShovel,Round
PointEdging Spade
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
45
BrushesMade of beryllium copper wires or brass wires.The products wear well.
Ex1001Brush
No. L S
Ex1001-3Ex1001-4Ex1001-5
350350350
345
165217254
Ex1002Brush
Ex1002-180 327
No. L
180
Ex999 Ex999-150 150 418
Wheel Brush
No. Dia
Ex1000-125 125 494Ex1000Cup Brush
No. Dia
46
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
47
Unique Range of Safety ToolsSafety Tools in Beryllium-Copper Alloy or Aluminium-Bronze Alloy.Approved for use in Ex / ATEX zones.
Ex610No. L B Be Al
Ex610S
Ex901
Ex302Marking Tool
Tweezers, Standard Type
48
Ex610-10 100 10 31 22Ex610-15 200 15 74 64
Tweezers, Sharp TypeEx610S-155 155 48 41
Ex901-90 90 2552 2193Ex901-160 160 4032 3464Ex901-250 250 8623 7408
No. L Be Al
No. B Be Al
"G" Clamp
Ex211No. B Be Al
No. L Dia. Be Al
Earthing ClampEx211-160 160 3249 2791
Ex302-3 180 3 10 8.6Ex302-5 250 5 44 38
Tweezers,Standard
TypeTw
eezers, SharpType
"G" Clam
pEarthing Clam
pM
arkingTool
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acce
ssor
ies
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
nd A
dditi
onal
Tool
sTo
olki
t
Ex308A No. L B H Be Al
Caulking ToolEx308A-40 200 40 9.6 558 480
Ex114 No. L Be Al
Scraper, Pick and ScalersEx114-450 450 1392 1196
Ex308B No. L Hex Be Al
Caulking ToolEx308B-32 1000 32 5417 4654Ex308B-36A 1200 36 10359 8900Ex308B-36B 1500 36 1471 1264Ex308B-50A 1000 50 1954 1679Ex308B-50B 1200 50 2413 2073
Ex1301 No. S L A Be Al
CrowbarEx1301-19 19 500 40 1272 1093Ex1301-23 23 800 45 2748 2129Ex1301-28 28 1000 50 3464 2976
Ex1303 No. S L Be Al
Wrecking BarEx1303-16 16 400 1304 1120Ex1303-19A 19 600 2624 2254Ex1303-19B 19 760 3240 2781Ex1303-19C 19 900 3734 3208
50
Ex1101No. L B H Be Al
WedgeEx1101-20 200 20 30 529 455Ex1101-25A 150 25 8 104 89Ex1101-25B 150 25 13 189 162Ex1101-30 200 30 30 788 677Ex1101-32 180 32 13 312 268Ex1101-40A 150 40 8 203 175Ex1101-40B 200 40 40 1388 1192Ex1101-40C 230 40 20 855 735Ex1101-40D 250 40 30 1336 1148Ex1101-50A 100 50 10 236 203Ex1101-50B 135 50 18 549 472Ex1101-50C 150 50 13 445 382Ex1101-50D 180 50 19 745 640Ex1101-50E 200 50 12 553 475Ex1101-50F 300 50 40 2441 2100
Ex113Carbide Drum Opener
No. L Be AlEx113-310 310 871 748
Ex1302 Ex1302-16 16 500 100 1305 1121Ex1302-20 20 600 120 2170 1864Ex1302-22 22 800 140 3188 2739
No. S L H Be Al
Angle Tracing Point
Ex125 Ex125-250 250 300 1265 1087
No. L H Be Al
Tri Square
CaulkingTool
CaulkingTool
Crowbar
Wrecking Bar
Scraper,Pick and Scalers
Carbide Drum
Opener
Wedge
Angle
TracingPoint
TriSquare
Wre
nche
sPl
iers
Ham
mer
sPu
nche
sCh
isel
s
Sock
ets
and
Acc
esso
ries
Scre
wdr
iver
sSc
rape
rsFi
les,
Scis
sors
,Saw
Shov
els
Brus
hes
Clam
ps a
ndA
dditi
onal
Tool
sTo
olki
t
51
Ex126Ruler
Ex108 No. L Be Al
Pick
Ex116 No. B Be Al
Rake
Ex109 No. B Be Al
Fork
Ex115 No. B Be Al
Hoe
No. S L Be Al
Ex126-30 30 335 69 59Ex126-50 50 545 109 94
Ex116-300 300 542 466
Ex109-280 280 1845 1585
Ex115-200 200 1802 1548
Ex108-420 420 1368 1175
52
RulerRakeForkH
oePick
Ex117Bucket Alu
BucketShacklePipe
CutterChain H
oist
No. Dia L Be Al
Ex117-250 250 12L 655 563.5
Ex900No. L B Be Al
ShackleEx900-20 72 20 720 674
Ex1512No. Max Pipe Size Be Al
Pipe CutterEx1512-50 50 (2") 2360 2647
Ex903Chain Hoist
Ex903-0.5 0.5 15830 13600Ex903-1 1.0 19555 16800Ex903-2 2.0 22698 19500Ex903-3 3.0 25026 21500
No. Cap. Ton Be Al
53
Socket Set