Download - Nokia 515 Service Manual
-
Check the repair policy before
performing any mechanical repair on Service Level
1&2!
Service Manual for L1 and L2
Nokia 515 Dual SIM(RM-952)
Nokia 515(RM-953)Key features 2,4" display (320 x 240) with COrning Gorilla glass 5 Mpix camera with LED flash Nokia Slam support MicroSD card support up to 32 GB Micro-USB connector
Version 1.0
Exploded view Disassembly steps Assembly hints
Solder components Service devices Product controls and interfaces
Service concept
2013 Nokia | Nokia Internal Use only | All Rights Reserved.
More More More
More More More
More
-
Service Manual Level 1 and 2
Nokia 515 RM-953Nokia 515 Dual SIM RM-952Version 1.0
Exploded view
A-COVERI0001
UI SHIELDINGI0005
LIGHT SWAP PWBI0009
LED FLASHI0019
CAMERA LENSI0018
EARPIECE ADHESIVEI0008
EARPIECEI0007
CAMERAI0014
DISPLAYI0004
KEYMATI0002
DOME SHEETI0006
SIM2 CONNECTORI0022
IHF SPEAKERI0016
ANTENNA MODULEI0015
B-COVERI0021
RF SHIELDING LIDI0011
TYPE LABELI0013
FM/BT SHIELDING LIDI0012
BB SHIELDING LIDI0010
IHF SPEAKER GASKETI0017
SCREW TORX+ SIZE 4 M1.4 X 3.8I0003
SCREW TORX+SIZE 4 M1.4 x 0.75-4.5
I0020
DUAL SIM VARIANT RM-952 ONLY!
LIGHT SWAP PACKAGE(I0009 - I0013)2
D-COVER ASSEMBLY(I0015 - I0019)3
UI SHIELDING ASSEMBLY(I0005 - I0008)1
Only availableas assembly
Not reuseableafter removal
Repair/swaponly in level 3
2013 Nokia | Nokia Internal Use only | All Rights Reserved.
-
Service Manual Level 1 and 2
Nokia 515 RM-953Nokia 515 Dual SIM RM-952Version 1.0
Disassembly steps
1) For disassembling you need the Nokia Standard toolkit version 2. You will also need the cameraremoval tool SS-276 and the SIM door key.
2) Protect the A-COVER with protective film.
-
3) Push the SIM door key to the shown hole in the bottom end of the device to release the B-COVER.
4) Use the SRT-6 to release the bottom end of the B-COVER completely.
-
5) Lift up the bottom end of the B-COVER and remove it.
6) Lift up the BATTERY from the shown place and remove it.
-
7) Unscrew the two shown Torx+ size 4 screws in the order shown.
8) Start to relase the A-COVER by opening the shown clip on the bottom end of the device with the SRT-6.
-
9) Open the five clips on the left side of the device holding the A-COVER with the SRT-6.
10) Release also the five clips on the right side of the device with the SRT-6. The A-COVER can then beseparated.
-
11) Protect the DISPLAY with protective film.
12) Protect also the other side of the A-COVER window with the protective film.
-
13) Push in the two shown clips holding the KEYMAT with the SS-93. Then carefully push the KEYMAT tothe direction shown and remove it.
14) Unscrew the four shown Torx+ size 4 screws in the order shown.
-
15) Open the two shown clips holding the D-COVER with the SRT-6.
16) The D-COVER can now be separated.
-
17) Use the SS-93 to open the DOME SHEET connector. Be careful not to damage the connector or anycomponents nearby.
18) Use the SS-93 to release the DOME SHEET. It is not reusable, discard it after removal.
-
19) Open the DISPLAY connector with the SS-93. Be careful not to damage the connector or anycomponents nearby.
20) Use the SS-93 to open the two shown clips holding the UI SHIELDING.
-
21) Release also the clip on the bottom end. The ENGINE BOARD and the UI SHIELDING can now beseparated.
22) To remove the DISPLAY, first insert the dental tool to the shown place. Carefully open one corner ofthe DISPLAY. Be careful not to injure yourself with the sharp end of the dental tool.
-
23) Continue to release the DISPLAY by slowly pushing the SS-93 under it. Remove the DISPLAY.
24) Release the EARPIECE with the dental tool and remove it. Do not use it again. Discard it. If theEARPIECE ADHESIVE stays on the UI SHIELDING, remove and discard it also.
-
25) Place the CAMERA removal tool SS-276 on top of the CAMERA as shown. Push and hold the buttonon the SS-276 to lock it to camera.
26) Lift up the SS-276 and the CAMERA. Remove the CAMERA.
-
27) Open the SIM2 CONNECTOR with the SS-93. Be careful not to damage the connector or anycomponents nearby. Remove the SIM2 CONNECTOR.Note that this step is for Nokia 515 Dual SIM variant only!
28) Use the dental tool to lift up the IHF SPEAKER. Do not use the IHF SPEAKER again. Discard it.
-
29) Remove also the IHF SPEAKER GASKET and discard it.
30) Release the shown side of the ANTENNA MODULE with the SRT-6.
-
31) Then push in the clips on the opposite side with the SS-93. Remove the ANTENNA MODULE.
32) Push the CAMERA LENS out with the SS-93 and remove it.
-
33) Push the LED FLASH with the sharp end of the SS-93 and remove it.
34) The Nokia 515/Nokia 515 Dual SIM disassembly procedure is complete.
-END OF DISASSEMBLY-
2013 Nokia | Nokia Internal Use only | All Rights Reserved.
-
Service Manual Level 1 and 2
Nokia 515 RM-953Nokia 515 Dual SIM RM-952Version 1.0
Assembly hints
1) When placing the ANTENNA MODULE, place the shown clip of the ANTENNA MODULE to the D-COVERfirst.
2) Then press the ANTENNA MODULE to attach the three shown clips.
-
3) Slide the DISPLAY under the two shown hooks on the UI SHIELDING. Then press the DISPLAY carefullyto activate the adhesive.
4) Push the KEYMAT to the A-COVER as shown to get the two shown clips on place.
-
5) Then attach the six shown clips.
6) Fasten the four Torx+ size 4 screws to the torque of 16Ncm in the order shown.
-
7) Fasten the two Torx+ size 4 screws to the torque of 13Ncm in the order shown.
2013 Nokia | Nokia Internal Use only | All Rights Reserved.
-
Service Manual Level 1 and 2
Nokia 515 RM-953Nokia 515 Dual SIM RM-952Version 1.0
Solder components
F2050
S2401 S2400
G2080
X2756 X1400
X6005
X6006 X7454
X2500
X2402X2401
Batterybackup capacitor
Display connector
Grounding spring
USB fuse
SIM2 connector
RM-952 ONLYCamera socket
BT antenna spring
Grounding spring
LED flash spring
Volume + switch
Volume -switch
Antenna spring
TOP
BOTTOM
2013 Nokia | Confidential | All Rights Reserved.
-
Service Manual Level 1 and 2
Nokia 515 RM-953Nokia 515 Dual SIM RM-952Version 1.0
Service devices
CA-101 Service cable AC-20 Travel charger SS-276 Camera removal tool
Nokia Standard Toolkit (v2)
For more information, refer to the Service Bulletin (SB-011) on Nokia Online. Supplier or
manufacturer contacts for tool re-order can be found in Recommended service equipment
document on Nokia Online.
2013 Nokia | Nokia Internal Use only | All Rights Reserved.
-
Service Manual Level 1 and 2
Nokia 515 RM-953Nokia 515 Dual SIM RM-952Version 1.0
Product controls and interfaces
2
4
7
10
5
3
1
15
16
18
13
11
86
9
12
17
14
9 End/Power key
8 Call key
7 Right selection key
6 Left selection key
5 Scroll key
4 Display
2 3.5 mm headset connector
3 Earpiece
1 Micro-USB connector
10 Keypad
11 Microphone
12 Back cover opening hole
13 Camera flash
14 Camera
15 Volume + key
16 Volume - key
17 Loudspeaker
18 Antenna area
2013 Nokia | Nokia Internal Use only | All Rights Reserved.
-
Service Manual Level 1 and 2
Nokia 515 RM-953Nokia 515 Dual SIM RM-952Version 1.0
Service concept
Flashing concept
BAT
Transceiver
Care Dummy Battery with power supply via Nokia charger or product specific battery
CA-101Service
software
2013 Nokia | Nokia Internal Use only | All Rights Reserved.
-
Service Manual Level 1 and 2
Nokia 515 RM-953Nokia 515 Dual SIM RM-952Version 1.0
Version history
Version Date Description
1.0 29.08.2012 First published version
2013 Nokia | Nokia Internal Use only | All Rights Reserved.