Marbett® I Component Catalog Issue 7
FLATTOP NORTH AMERICA
Marbett® Conveying Components Product PortfolioPage 2
Mar
bett®
Intr
oduc
tion
IntroductIonThe Marbett component range enables Rexnord Industries, LLC to be the preferred global FlatTop solutions supplier for conveyors and machines by providing a complete package with chains to maximize end user and OEM productivity.
Rexnord chains reach their best performance by the use of low-friction/low-wear Marbett® chain guide-return solutions, resulting in higher productivity and cost savings for the end user:
• Reduced downtime, reduced maintenance and reduced replacement costs due to extended chain (and guide) life
• Reduced energy consumption and reduced conveyor costs (longer conveyor length = reduced number of drives)
• Limited or no lubrication possible
• Minimized noise due to material and design solutions.
The top quality of Rexnord chains along with the high performance Marbett guides for container and package handling achieve a high conveyor efficiency:
• Prevent product tippage, container damage/discards due to low friction materials, resulting in reduced
downtimes and better container quality.
Conveyor construction becomes easy, quick and repeatable through the Marbett components modular concept:
• Clamps, brackets, joints, bearing heads, support
bases and levellers are designed to easily connect
to commercial tubes, rods and metal structures.
• Eliminates the need for welded parts and extensive
labor to assemble conveyor systems, resulting in
higher productivity, reduced conveyor construction
costs and better quality
Parts are designed to meet sanitation requirements and
are easily cleanable. They have high corrosion and chemical
resistance and are the right solution in all applications where
frequent washings are needed.
Marbett® Conveying Components Product Portfolio Index Page 3
Marbett ® Product Portfolio Index
Index
PART 637Marbett® Guide Rail Bracket
Page 19
Marbett® Edge Guide Rail - Page 10
PART 367Marbett® Flat Guide Rail
Page 7
Marbett® 1” Flat Guide Rail Page 6
Marbett® Flat Guide Rail Page 6
Marbett® Convex Guide Rail Page 5
Marbett® Round Guide Rail Page 5
Marbett® 1” Tee Guide Rail Page 7
Marbett® 1-1/4” Tee Guide Rail Page 8
Marbett® 1.6” Tee Guide Rail Page 8
Marbett® 2-1/4” Tee Guide Rail Page 9
Marbett® Neck Guide Rail Page 9
PART 672Marbett® Roller Transfer
Page 22
PART 569Marbett® Roller Transfer (Side)
Page 22
PART 568Marbett® Roller Transfer
(Center) - Page 21
PART 567Marbett® Roller Transfer (Side)
Page 21
PART 256Marbett® Swivel
Page 20
PART 255Marbett® Swivel Head
Page 20
PART 182Marbett® Knob
Page 19
PART 174Marbett® Cross Clamp with
Setscrew - Page 18
PART 174Marbett® Cross Clamp
Page 18
Lower Conveyor Bracket Page 13
PART 210Marbett® Rail Clamp Assy
Page 17
Lower Conveyor Bracket Type 2
Page 14
PART 210Marbett® Etched Guide Rail
Clamp Assy - Page 17
Upper Conveyor Bracket Page 13
Offset Upper Conveyor Bracket Type A
Page 15
PART 210Marbett® Guide Rail Clamp
Page 16
PART 903Marbett® ViseClamp™
Page 12
Lower Conveyor Bracket Type 3
Page 15
PART 902Marbett® ViseSplice™
Page 12
PART 371Marbett® Guide Rail
Connecting Link - Page 11
PART 369Marbett® Guide Rail
Connecting Bar - Page 11
Marbett® Tab Tee Guide Rail - Page 10
Offset Upper Conveyor Bracket Type B
Page 14
Marbett® Conveying Components Product Portfolio IndexPage 4Inde
x M
arbe
tt® P
rodu
ct P
ortfo
lio In
dex
PART 169Marbett® Leveler
Page 35
PART 613Marbett® Bi-material
Return Roller - Page 27
PART 612Marbett® Split Shaft Collar
with Square Bore - Page 26
PART 612Marbett® Split Shaft Collar
with Round Bore- Page 26
PART 614Marbett® Bi-material
Return Roller - Page 27
PART 657Marbett® Bi-material
Return Roller - Page 28
PART 555Marbett® Guide Flange
Page 28
PART 302Marbett® Ratchet Handle
Page 29
PART 303Marbett® Ratchet Handle
Page 29
PART 905Marbett® Modular Nose-over Bar (Standard) - Page 30
PART 905Marbett® Modular Nose-over Bar (Low Profile) - Page 30
PART 905 Marbett® Modular Nose-over Bar (Dynamic) - Page 31
PART 180Marbett® Tube End
Page 32
PART 224Marbett® Tube End
Page 32
PART 94Marbett® Teardrop Leveler
Page 33
PART 133Marbett® Leveler
Page 33
PART 323Marbett® Leveler
Page 34
PART 479Marbett® Leveler
Page 34
PART 763Marbett® T-Clamp
Page 25
PART 570Marbett® Roller Guide
Page 24
PART 595Marbett® T-Clamp
Page 25
PART 518Marbett® Control Contact
Lever - Page 24
PART 580Marbett® Roller Transfer
Page 23
PART 557Marbett® (Center) Roller Guide
Page 23
Drawing
Marbett® Conveying Components Product Portfolio Page 5
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Stock Length (ft)
514-158-1 10
Marbett® convex Guide railM
arbett ® convex Guide r
ail
FDA Approved white UHMWPE profile14 gauge stainless steel sheath
Base Width0.67 in
Face Width0.46 in
Ove
rall
Hei
ght
0.70
in
Marbett® round Guide rail
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
FDA Approved white UHMWPE profile14 gauge stainless steel sheath
Base Width0.67 in
Over
all H
eight
0.70 i
n
Marbett ® r
ound Guide r
ail
Part Number Stock Length (ft)
514-145-4 8
514-145-1 10
Photo shows Guide Rail with Convex white UHMW profile and 14 gauge stainless steel sheath.
Photo shows Guide Rail with Round white UHMW profile and 14 gauge stainless steel sheath.
Drawing
Page 6
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Stock Length (ft)
514-146-4 8
514-146-1 10
Marbett® Flat Guide railM
arbe
tt® F
lat G
uide
rai
l
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
FDA Approved white UHMWPE profile14 gauge stainless steel sheath
Face Width0.46 in
Over
all H
eight
0.70 i
n
Base Width0.67 in
Part Number Stock Length (ft)
514-210-4 8
514-210-1 10
Marbett® 1” Flat Guide rail
Mar
bett®
1”
Flat
Gui
de r
ail
FDA Approved white UHMWPE profile14 gauge stainless steel sheath
Base Width0.67 in
Face Width1.00 in
Over
all H
eight
0.70 i
n
Photo shows 1” wide Flat Guide Rail with white UHMW profile and 14 gauge stainless steel sheath.
Photo shows Guide Rail with Flat white UHMW profile and 14 gauge stainless steel sheath.
Drawing
Marbett® Conveying Components Product Portfolio Page 7
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Stock Length (ft)
367-655712M 10
PArt 367 - M
arbett ® Flat Guide r
ailPArt 367 - Marbett® Flat Guide rail
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Plastic profile in UHMWPE (black)Metal profile in austenitic stainless steel
Face Width40.0 mm
Gap8.5 mm
BaseWidth
20.0 mm
Plas
tic P
rofil
e H
eigh
t10
.0 m
m
Overall Height
23.0 mmMetal Profile Width
1.5 mm
Metal Profile Inside Height
16.0 mm
Part Number Stock Length (ft)
514-209-4 8
514-209-1 10
Marbett ® 1” tee G
uide rail
Marbett® 1” tee Guide rail
FDA Approved white UHMWPE profile14 gauge stainless steel sheath
Base Width0.67 in
Face Width1.00 in
Ove
rall
Hei
ght
0.84
in
Photo shows 1” wide Tee Guide Rail with white UHMW profile and 14 gauge stainless steel sheath.
Photo shows 40 mm wide Flat Guide Rail with UHMW Profile and standard steel profile
Drawing
Page 8
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Stock Length (ft)
514-175-1 10
Mar
bett®
1.6
” te
e G
uide
rai
l
Marbett® 1.6” tee Guide rail
FDA Approved white UHMWPE profile14 gauge stainless steel sheath
Face Width1.60 in
Base Width0.67 in
Over
all H
eight
0.84 i
n
Part Number Stock Length (ft)
514-147-4 8
514-147-1 10
Mar
bett®
1-1
/4”
tee
Gui
de r
ail
Marbett® 1-1/4” tee Guide rail
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
FDA Approved white UHMWPE profile14 gauge stainless steel sheath
Face Width1.25 in
Ove
rall
Hei
ght
0.84
in
Base Width0.67 in
Photo shows 1.6” wide Tee Guide Rail with white UHMW profile and 14 gauge stainless steel sheath.
Photo shows 1-1/4” wide Tee Guide Rail with white UHMW profile and 14 gauge stainless steel sheath.
Drawing
Marbett® Conveying Components Product Portfolio Page 9
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Stock Length (ft)
514-176-4 8
514-176-1 10
Marbett ® 2-1/4” tee G
uide rail
Marbett® 2-1/4” tee Guide rail
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
FDA Approved white UHMWPE profile14 gauge stainless steel sheath
Face Width2.25 in
Base Width0.67 inOv
erall
Heig
ht0.8
4 in
Part Number Stock Length (ft)
514-148-1 10
Marbett ® n
eck Guide
Marbett® neck Guide
FDA Approved white UHMWPE profile14 gauge stainless steel sheath
Base Height0.67 in
Face Width0.16 in
Over
all H
eight
0.89 i
n
Shou
lder
Heigh
t0.3
3 in
Photo shows 2-1/4” wide Tee Guide Rail with white UHMW profile and 14 gauge stainless steel sheath.
Photo shows Neck Guide Rail in white UHMW profile with 14 gauge stainless steel sheath.
Drawing
Page 10
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Stock Length (ft)
514-235-4 8
514-235-1 10
Mar
bett®
Edg
e G
uide
rai
lMarbett® Edge Guide rail
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
FDA Approved white UHMWPE profile14 gauge stainless steel sheath
Shou
lder
Heigh
t0.3
8 in
Base Width0.67 in
Overall Width1.25 in
Top o
f Edg
e to
Bottm
of S
heath
0.84 i
n
Face Width0.25 in
Part Number Stock Length (ft)
514-236-1 10
Mar
bett®
tab
Gui
de r
ail
FDA Approved white UHMWPE profile14 gauge stainless steel sheathFor use with Rexnord 882 TableTop® chains
Marbett® tab Guide rail
Base Width0.67 in
Shou
lder H
eight
0.60 i
nFace Width
1.19 inOv
erall
He
ight
1.03 i
n
Photo shows Edge Guide Rail with white UHMW profile and 14 gauge stainless steel sheath.
Photo shows Tab Guide Rail with white UHMW profile and 14 gauge stainless steel sheath.
Drawing
Marbett® Conveying Components Product Portfolio Page 11
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
PArt 369 - M
arbett ® Guide r
ail connecting BarPArt 369 - Marbett® Guide rail connecting Bar
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Material: Zinc-plated steel
22.5Hole Spacing
45.0 45.0 22.5
Length180.0
Hei
ght
13.0
Thread SizeM8
Width6.0
45.0
PArt 371 - Marbett® Guide rail connecting Link
PArt 371 - M
arbett ® Guide r
ail connecting Link
Material: reinforced polyamide PA FV (black)Use: Easy assembly of wearstrips on frame. Assemble with M6 or M8 hexagon bolt
20.0Co
unte
rbor
eD
epth
6.0
Thread SizeM88.21.
2Th
ickn
ess
15.0
Counterbore13.2 Hex
Width16.8
Part./Art.
Réf. 371
Part./Art./Réf.
366-367-368
Part Number Overall Length (in) Thread Size
369-69995 7 M8
Part Number Thread Size
371-61056 M8
Drawing
Page 12
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
PAr
t 90
2 -
Mar
bett®
Vis
eSpl
ice™ PArt 902 - Marbett® ViseSplice™
Part Number
902-652041
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
For use with all Marbett® guide rail profilesAll stainless steel construction rail profilesTired of opening hundreds of individual bags? Boxes of 100 pieces are also available. Simply add “-100” to the end of the part number. i.e. 902-652041-100 is a box of 100 bulk parts
US Patent #5896980
Overall Width0.86 in
Over
all
Heigh
t1.0
3 in
Lock Nut
Clam
p Heig
ht0.6
0 in
Centerline of Studto Centerline of Stud
2.00 in
5/16-18 Thread Size
Overall Length3.00 in
With Nut Without NutStud Length (in)
Part Number Part Number
903-654741 903-654101 3/4
903-654751 903-654111 1
PAr
t 90
3 -
Mar
bett®
Vis
ecla
mp™ PArt 903 - Marbett® Viseclamp™
For use with all Marbett® guide rail profilesAll stainless steel construction rail profilesTired of opening hundreds of individual bags? Boxes of 100 pieces are also available. Simply add “-100” to the end of the part number. i.e. 903-654101-100 is a box of 100 bulk parts
Overall Width0.86 in
Stud
Le
ngth
Clam
p Heig
ht0.6
0 in
Overall Length1.00 in
Thread Size5/16-18
Photo shows the ViseSplice™ clamp.
Photo shows a ViseClamp™ with 3/4 inch stud without nut.
Drawing
Marbett® Conveying Components Product Portfolio Page 13
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Length (in) Width (in) Slot Width (in)
114-398-1 5.81 3.56 7/16
upper conveyor Bracket
Photo Shows Conveyor Bracket
Bracket in Black Glass-Reinforced Nylon
upper conveyor Bracket
3.56 in
4.80
in
1.80
in
1.95 in
0.38 in
0.38 in
0.38
in
5.80
in
1.50 in
0.43 in
7/16 in x 1.00 in2 Slots
7/16 in x 2 1/4 inSlot
Photo Shows Conveyor Bracket
Part Number Length (in) Width (in) Slot Width (in)
114-399-1 4.08 3.56 7/16
Lower conveyor Bracket
Bracket in Black Glass-Reinforced Nylon
Lower conveyor Bracket
4.07
in
0.38
in
3.07
in
1.57
in
0.43
in
1.95 in
3.57 in
0.38 in 0.43 in
2.05 in
7/16 in x 2 1/4 inSlot
7/16 in x 1.00 in2 Slots
Drawing
Page 14
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Length (in) Width (in) Slot Width (in)
114-671-1 4.50 3.38 11/32
Lower conveyor Bracket type 2
Photo Shows Conveyor Bracket
Bracket in Black Glass-Reinforced Nylon
Low
er c
onve
yor
Brac
ket t
ype
2
1.88 in
0.34 in
1.50 in3.38 in
1/32 in x 2 1/4 inSlot
1/32 in x 2 3/4 inSlot
0.34
in0.
38 in
4.50
in
2.75
in
0.38 in
Part Number Length (in) Width (in) Slot Width (in)
114-672-1 4.75 3.00 11/32
offset upper conveyor Bracket type B
Photo Shows Conveyor Bracket
Bracket in Black Glass-Reinforced Nylon
off
set u
pper
con
veyo
r Br
acke
t typ
e B
3.00 in
4.75
in
0.34
in0.
38 in
3.63
in
1.38
in0.38 in
0.13 in
1.50 in
0.34 in
1/32 in x 1 1/2 inSlot
1/32 in x 1 1/4 inSlot
1/32 in x 1 7/8 inSlot
1.69 in
Drawing
Marbett® Conveying Components Product Portfolio Page 15
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Length (in) Width (in) Slot Width (in)
114-673-1 3.38 3.38 11/32
Lower conveyor Bracket type 3
Photo Shows Conveyor Bracket
Bracket in Black Glass-Reinforced Nylon
Lower conveyor Bracket type 3
1.88 in
1/32 in x 2 1/4 inSlot
1/32 in x 2 1/4 inSlot
0.34
in
0.34 in
1.50 in
1.88
in
0.38
in
0.38 in
3.38
in
3.38 in
Part Number Length (in) Width (in) Slot Width (in)
114-674-1 7.63 3.00 11/32
offset upper conveyor Bracket type A
Photo Shows Conveyor Bracket
Bracket in Black Glass-Reinforced Nylon
offset u
pper conveyor Bracket type A
3.00 in
0.38 in
0.13 in
0.38
in0.
34 in
7.63
in
1.50 in
0.34 in
1/32 in x 3 3/8 inSlot
1/32 in x 2 inSlot
1/32 in x 1 7/8 inSlot
5.56
in
1.75
in
1.69 in
Drawing
Page 16
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
PAr
t 21
0 -
Mar
bett®
Gui
de r
ail c
lam
p PArt 210 - Marbett® Guide rail clamp
Part Number Rod Base Diameter (in) Step Diameter (in) Assembled Item
210-59941 0.53 0.45 No
210-654791 0.53 0.45 Yes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Fits all Marbett® guide rail assembliesClamp in reinforced nylon (PA)
Botto
m of
Clam
p to
Botto
m of
Rod C
hann
el1.1
2 inM5
-Thr
ead S
ize
0.88 i
n
Over
all Le
ngth
1.46 i
n
Clamp Width1.06 in
ClampBase
Lengthø0.75 in
Step
Leng
th0.1
2 in
Rod C
hann
el Le
ngth
0.67 i
n
Step DiameterRod Base Diameter
Clamp Height1.06 in
Cente
rline o
f Nut
to Cl
amp B
ase
Photo shows Pre-assembled Laser Etched Rail Clamp.
Drawing
Marbett® Conveying Components Product Portfolio Page 17
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part NumberAdjusting Rod
Diameter [Nom]Rod Length
[Nom]
Guide Rail Clamp Part
Number
Adjusting Rod Part Number
210-655811 1/2 in 5.00 in 210-59941114-2694-1114-2695-2
PArt 210 - Marbett® Etched Guide rail clamp Assembly
Fits all Marbett® guide rail assembliesClamp in reinforced nylon (PA)Adjusting rod in stainless steel; Footplate in reinforced polyamide (nylon)All assemblies supplied with stainless steel nut
Rod Length
Adjusting Rod Diameter0.50 in
Rail Channel Diameter0.46 in
Centerline of nut to Top of Step
0.67 in Step Length0.13 in
Cla
mp
heig
ht1.
06 in
PArt 210 - M
arbett ® Etched Guide r
ail clamp
Part Number
Adjusting Rod Guide Rail Clamp Part
Number
Adjusting rod part numberRod Diameter
(in)Rod Length (in)
210-654671 1/2 3.00 210-59941 114-2308-1
210-654681 1/2 5.00 210-59941 114-2308-2
PArt 210 - M
arbett ® Guide r
ail clamp Assem
bly
Fits all Marbett® guide rail assembliesClamp in reinforced nylon (PA)Adjusting rod in stainless steel; Footplate in reinforced polyamide (nylon)All assemblies supplied with stainless steel nut
PArt 210 - Marbett® Guide rail clamp Assembly
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Rod Length
Adjusting Rod Diameter0.50 in
Rail Channel Diameter0.46 in
Centerline of nut to Top of Step
0.67 in Step Length0.13 in
Cla
mp
heig
ht1.
06 in
Photo shows Pre-Assembled Laser Etched Rail Clamp with stainless steel Adjusting Rod.
Photo shows Pre-Assembled Rail Clamp with stainless steel Adjusting Rod.
Drawing
Page 18
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number
Round Bore Hex Bore Square Bore
Vertical Rod Diameter (in)
Horizontal Rod Diameter (in)
Rod Diameter (in) Rod Diameter (in)
174-646481 1/2 1/2 - -
174-671861 - 1/2 7/16 7/16
PAr
t 17
4 -
Mar
bett®
cro
ss c
lam
p
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Cross clamp in reinforced nylon (PA)All hardware in stainless steel
PArt 174 - Marbett® cross clamp
Overall Length2.87 in
Over
all W
idth
1.16 i
nCl
amp H
eight
0.87 i
n
Over
all H
eight
1.16 i
n
0.12 i
n Gap
M6-Thread Size
Vertical Rod Diameter
Horizontal Rod Diameter
Distance Between Rod Centerlines0.98 in
PArt 174 - Marbett® cross clamp with setscrew
PAr
t 17
4 -
Mar
bett®
cro
ss c
lam
p w
ith s
etsc
rew
Part NumberRound Bore Hex Bore
Vertical Rod Diameter (in)
Horizontal Rod Diameter (in)
Rod Diameter (in)
174-654661 1/2 1/2 -
174-655991 - 1/2 7/16
Cross clamp in reinforced nylon (PA)All hardware and setscrew in stainless steelSetscrew is only supplied in one bore
Overall Length2.87 in
Over
all W
idth
1.16 i
nCl
amp H
eight
0.87 i
n
Over
all H
eight
1.16 i
n
0.12 i
n Gap
M6-Thread Size
Vertical Rod Diameter
Distance Between Centerline Rod0.98 in
Horizontal Rod Diameter
Photo shows Cross Clamp in reinforced nylon with stainless steel hardware.
Photo shows Cross Clamp in reinforced nylon with stainless steel hardware.
Drawing
Marbett® Conveying Components Product Portfolio Page 19
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
PArt 637 - Marbett® Guide rail BracketPAr
t 637 - Marbett ® G
uide rail Bracket
Part Number Rod Diameter (in)
637-648372 0.47
637-648392 0.63
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Bracket, rotating head & knob in reinforced nylon (PA)Eyebolt, nut, bolt & washers in stainless steelHex insert in knob in nickel plated brass
Base Length9.0 mm
Rod
Cene
rline
to
Top
of S
lot
81.0
mm
Ove
rall
Hei
ght 2
48.5
mm
Overall Length83.0 mm
Bottom of Bracket to
Cenerline ofBottom slot
16.0 mm
33.0
mm
33.
0 m
mD
ista
nce
Betw
een
Slot
Cen
terli
neDistanceBetween
Slots14.0 mm
OverallWidth
42.0 mm
La Slot
Width10.5 mm
Arms23.0 mm
Base
Hei
ght
109.
0 m
m
Top of Base to Rod centerline
68.0 mm
d Rod
Dia
met
er
Distance from Base Knob Centerline
64.0 mm
Shoulder Length
45.0 mm
KnobWidth
53.0 mm
Wrench19 mm
PArt 182 - M
arbett ® Knob
PArt 182 - Marbett® Knob
Part Number Thread Size
182-54911 M10
Knob in reinforced nylon (PA)Metal insert in nickel plated brass
NeckLength0.71 in
Wrench Height0.39 in
Insert Length1.57 in
0.75 inch Wrench
Over
all W
idth
1.97 i
n
WrenchLength1.10 in
Base
Diam
eter
ø0.91
in
Thre
ad S
izeM1
0
Overall Height1.79 in
Photo shows Guide Rail Bracket with bracket, rotating head, and knob in reinforced nylon.
Photo shows Part #182-54911, Marbett Conveyor Component Knob in black reinforced nylon and nickle plated brass insert.
Drawing
Page 20
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
PArt 255 - Marbett® Swivel HeadPA
rt
255
- M
arbe
tt® S
wiv
el H
ead
Part Number Rod Diameter (in)
255-685281 1/2
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Swivel in reinforced nylon (PA)Eyebolt, washer, and nut in stainless steel
ø1.18 in Step Diameter
Thread SizeM10
ø1.42 in Swivel Diameter
Swive
l Heig
ht1.8
3 in
Botto
m of
Eyeb
olt to
Ce
nter o
f Swi
vel B
ore
1.38 i
nTo
p of W
ashe
r to
Botto
m of
Swive
l0.5
0 in m
ax
Top o
f Step
to
Bore
Ce
nterlin
e0.7
9 in
Step
Heigh
t0.1
0 in
Rod D
iamete
r
PAr
t 25
6 -
Mar
bett®
Sw
ivel PArt 256 - Marbett® Swivel
Part Number Rod Diameter (in)
256-64561 1/2
Swivel in reinforced nylon (PA)Eyebolt, nut, bolt, and washer in stainless steelCan be used with Knob 182
ø1.18 in Step Diameterø1.42 in Swivel Diameter
Swive
l Heig
ht1.8
9 in
Botto
m of
Stud
to B
ore
Cente
rline
1.89 i
n
Top o
f Stud
of Bo
re
Cente
rline
1.77 i
n Top o
f Step
to Bo
re
Cente
rline
0.79 i
n
Step
Heigh
t0.1
0 in
Rod D
iamete
r
Thread SizeM10To
p of W
ashe
rto
Botto
m of
Step
0.6 in
max
Photo shows a swivel head with 1/2 inch rod diameter.
Photo shows a swivel with 1/2 inch rod diameter.
Drawing
Marbett® Conveying Components Product Portfolio Page 21
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Roller Type Roller Width (in) Overall Width (in)
567-688792Multiple Small
Rollers
2.66 3.35
567-687382 3.82 4.53
567-688822Single Roller
2.66 3.35
567-699002 3.82 4.53
PArt 567 - M
arbett ® roller transfer
PArt 567 - Marbett® roller transfer (Side)
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Frame in Rexnord® HP™ materialMultiple roller version uses rollers in Rexnord® HP™ materialSingle roller version uses rollers in white polyethyleneRoller shafts are stainless steel
US Patent #6164435
Ove
rall W
idth
Blade Length1.23 in
Centerline of MountingBolt to Blade Edge
1.66 in
Overall Length2.06 in
Modu
le He
ight
0.84 i
n
Rolle
rCl
eara
nce
0.04 i
nRollerSpacing0.50 in
Roller Diameterø0.43 in
Roll
er W
idth
Standard 1/4-20 Bolt(Not Included)
Part Number Roller Type Roller Width (in) Overall Width (in)
568-605912Multiple Small
Rollers
2.66 3.35
568-687402 3.82 4.53
568-603402Single Roller
2.66 3.35
568-699022 3.82 4.53
PArt 568 - M
arbett ® roller transfer
PArt 568 - Marbett® roller transfer (center)
Frame in Rexnord® HP™ materialMultiple roller version uses rollers in Rexnord® HP™ materialSingle roller version uses rollers in white polyethyleneRoller shafts are stainless steel
US Patent #6164436
Module Width1.0 in
RollerSpacing0.50 in
Centerline of Mounting Boltto Back Edge
0.53 in
Centerline of MountingBolt to Front Edge
0.46 in
Rolle
rCl
eara
nce
0.04 i
n
Modu
leHe
ight
0.84 i
n
Rolle
r Di
amete
rø0
.43 in
Ove
rall W
idth
Roll
er W
idth
Standard 1/4-20 Bolt(Not Included)
Photo shows a side module with nose roller transfer, 3.35 inches overall width, 2.06 inches overall length, with multiple small rollers.
Photo shows a center module roller transfer, 3.35 inches overall width, with multiple small rollers.
Drawing
Page 22
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Roller Type Roller Width (in) Overall Width (in)
569-605922Multiple Small
Rollers
2.66 3.35
569-687392 3.82 4.53
569-603412Single Roller
2.66 3.35
569-699012 3.82 4.53
PAr
t 56
9 -
Mar
bett®
rol
ler
tran
sfer PArt 569 - Marbett® roller transfer (Side)
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Frame in Rexnord® HP™ materialMultiple roller version uses rollers in Rexnord® HP™ materialSingle roller version uses rollers in white polyethyleneRoller shafts are stainless steel
Centerline of Mounting Boltto Back Edge
0.92 in
Length from Bottom Edgeto Edge0.49 in
Roller Spacing0.50 in
Modu
le He
ight
0.84 i
n
Rolle
rCl
eara
nce
0.04 i
n
Roller Diameterø0.43 in
Overall Length1.44 in
Over
all W
idth
Roll
er W
idth
Standard 1/4-20 Bolt(Not Included)
Part Number Roller Type Roller Width (in) Overall Width (in)
672-687412Multiple Small
Rollers
2.66 3.35
672-687432 3.82 4.53
672-699032 Single Roller 2.66 3.35
PAr
t 67
2 -
Mar
bett®
rol
ler
tran
sfer PArt 672 - Marbett® roller transfer (Side)
Frame in Rexnord® HP™ materialMultiple roller version uses rollers in Rexnord® HP™ materialSingle roller version uses rollers in white polyethyleneRoller shafts are stainless steel
OverallLength1.67 in
Roll
er W
idth
Blade Length0.83 in
Centerline of Mounting Boltto Blade Edge
1.19 in
Modu
leHe
ight
0.84 i
n
Rolle
rCl
eara
nce
0.04 i
n
Roller Spacing0.50 in
Standard 1/4-20 Bolt(Not Included)
Rolle
r Diam
eter
ø0.43
in
Ove
rall W
idth
Photo shows a side module without nose roller transfer, 3.35 inches overall width, with single rollers.
Photo shows a side module with nose roller transfer, 3.35 inches overall width, 1.67 inches overall length, with multiple small rollers.
Drawing
Marbett® Conveying Components Product Portfolio Page 23
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Mounting Plate Length (in) Mounting Plate Inner Spacing (in)
557-695991N 1.57 0.31
PArt 557 - M
arbett ® roller G
uide
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Frame in Black Acetal (POM)Rollers in White Acetal (POM)Mounting screw in Stainless SteelEach part number consists of (5) 3.93 in modules
RollerDiameterø0.54 in
Roller Spacing0.47 in
Roller SpacingBetween Modules
0.59 in
Module Length3.93 in
Roller Clearance0.12 in
Module Width1.30 in
Rolle
rHe
ight
1.26 i
n
Modu
le He
ight
1.67 i
nMo
untin
g Plat
eLe
ngth
Botto
m of
Chan
nel
to To
p of
Moun
ting P
late
0.45 i
n
Overall Length19.63 in
Mounting PlateIner Spacing
PArt 557 - Marbett® (center) roller GuidePAr
t 580 - Marbett ® r
oller transfer
PArt 580 - Marbett® (Side) roller Guide
Frame in Black Acetal (POM)Rollers in White Acetal (POM)Each part number consists of (5) 2.93 in modules
Module Length 74.3 mmOverall Length 371.5 mm
Mod
ule
Hei
ght 4
6 m
mPr
ofile
Wid
th 4
0 m
m
Rolle
r H
eigh
t 32
mm
ModuleWidth32 mm
RollerClearance
3 mm
Roller Clearance 18mm
ProfileDepth10 mm
Roller Spacing12 mm
Roller Diameterø13.6
Roller Spacing Between Modules
14 mm
Photo shows a roller guide consisting of (5) 3.93 inch modules, totaling 19.63 inches in overall length.
Part Number Profile Width (in) Profile Depth (in) Module Height (in)
580-611772 1.57 0.39 1.81
Drawing
Page 24
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number
570-601162N
PAr
t 57
0 -
Mar
bett®
rol
ler
Gui
de
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Frame in black acetal (POM)Rollers in white acetal (POM)Mounting screw in stainless steelThreaded bushing in plated brassFor use with part 557-695991N
Module Length3.93 in
Nose Length1.22 in
PArt 570 - Marbett® roller Guide
Part Number
518-642951N
PAr
t 51
8 -
Mar
bett®
con
trol
con
tact
Lev
er
Lever in black polypropyleneInsert (for magnetic sensor) in stainless steel
Arm
Widt
h1.1
8 in Ar
m Fla
nge
Widt
h0.1
0 in
2.36 in
1.38 in
6.56 in
Lower Arm Length7.19 in
45
= =
Arm Height1.34 in
0.75 in
2.36 in
Centerli
ne of
Shaft Fixin
g
Hole to
Centerli
ne
of Hole
for
Magnetic
Insert
1.38 in
A
AB
B
Hole for magnetic insert
Shaft Fixing Hole
Arm Height1.34 in
Centerline of Shaft
Fixing Hole to
Bottom Edge
0.59 in
Centerline of Shaft
Fixing Hole to
Top Edge
Arm Angle
Upper A
rm Lengt
h
Centerli
ne of
Hole for
Magnetic
Ins
ert to
Arm End
PArt 518 - Marbett® control contact Lever
Photo shows a roller guide module with nose.
Photo shows a control contact lever with hole and metal insert.
Drawing
Marbett® Conveying Components Product Portfolio Page 25
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part NumberRound Bore Square Bore
Rod Diameter (in) Rod Diameter (in)
595-610452 0.79 0.71
PArt 595 - M
arbett ® t-clamp
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Clamp in reinforced polyamide (nylon)Supplied with stainless steel bolt
Clam
p Heig
ht1.5
7 in
Hole Spacing2.17 in
Overall Width2.95 in
Clamp Width1.18 in
Upper Mounting Hole Diameterø 0.53 in
Lower MountingHole Diameter
ø 0.33 in
Botto
m of
Clam
pto
Botto
m of
Uppe
rMo
untin
g Hole
0.18 i
n
Shou
lder
Heigh
t0.5
7 in
Cente
rline o
fRo
d Hole
to
Clam
p Bott
om1.0
6 in
Over
all H
eight
2.05 i
n
Thre
adSi
ze M6
Assembly of round andsquare rods
Square BoreRod DiameterRound BoreRod Diameter
PArt 595 - Marbett® t-clamp
Part Number Rod Diameter (in)
763-610633 0.79
PArt 763 - M
arbett ® t-clamp
Clamp and rod in reinforced polyamide PA FV (black)Threaded insert in nickel plated brassNut, washer and eyebolt in austenitic stainless steelMax. recommended tightening torque: 4 Kgm (28.9 ft. lbs.)
Knob Width50 mm
Overall Width75 mm
A
Botto
m o
f Cla
mp
to b
otto
m o
f upp
er m
ount
ing
hole
4.5
mm
Hole Spacing55 mm
Rod Diameter
Ove
rall
Clam
pH
eigh
t48
mm
Knob
Hei
ght
23.5
mm
Shou
lder
H
eigh
t14
.5 m
mCl
amp
Hei
ght
25 m
m
Lower Mounting Hole Diameterø 13.5 mm
Upper Mounting Hole Diameterø 8.5 mm
PArt 763 - Marbett® t-clamp
Photo shows T-Clamp in reinforced nylon with stainless steel bolt.
Drawing
Page 26
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number
Shaft Diameter
(in)
Overall Diameter
(in)
Overall Width (in)
Thread Size
Keyway Width (in)
Distance From Bottom of Shaft Diameter
to Top of Keyway (in)Without Keyway
612-655072 1/2 1.18 in 0.46 M4 - -612-655092 5/8 1.38 in 0.46 M4 - -612-655102 3/4 1.57 in 0.55 M4 - -
With Keyway612-655112 1 1.77 in 0.55 M4 0.25 1.13612-655122 1 1/4 1.97 in 0.63 M4 0.25 1.38612-655132 1 1/2 2.50 in 0.71 M5 0.38 1.68
PAr
t 61
2 -
Mar
bett®
Spl
it Sh
aft c
olla
r w
ith r
ound
Bor
e
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Collar in reinforced polyamide (PA)Hardware in stainless steelMaximum recommended torque: 26 in-lbs
Thread Size
Keyw
ay W
idth
Bottom of Shaft Diameterto Top of Keyway
Overall Diameter
OverallWidth
Shaft Diameter
PArt 612 - Marbett® Split Shaft collar with round Bore
Part Number Shaft Diameter (in) Overall Width (in) Overall Diameter (in)
612-692942 1 1/2 0.71 3.46
612-692972 2 1/2 0.71 4.57
M6Thread Size
Overall Diameter
OverallWidth
Shaft DiameterPAr
t 61
2 -
Split
Sha
ft co
llar
with
Squ
are
Bore
Collar in reinforced polyamide (PA)Hardware in stainless steelMaximum recommended torque: 26 in-lbs
PArt 612 - Split Shaft collar with Square Bore
Photo shows part number a split shaft collar with 1 inch round bore, with keyway.
Photo shows a split shaft collar with 1 1/2 inch square bore.
Drawing
Marbett® Conveying Components Product Portfolio Page 27
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Shaft Diameter (in) Bore Diameter (in)
613-632472 1/2 0.52
613-615352 5/8 0.65
613-635142 3/4 0.77
PArt 613 - M
arbett ® Bi-material r
eturn roller
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Roller and bushing in white acetal (POM)Outer surface in grey rubber
Bore
Diam
eter
Rolle
r Diam
eter
ø 2.3
6 in
Length Through
Bore1.61 in
PArt 613 - Marbett® Bi-material return roller
Part Number Shaft Diameter (in) Bore Diameter (in)
614-632482 1/2 0.52
614-615392 5/8 0.65
614-635152 3/4 0.77
PArt 614 - M
arbett ® Bi-material r
eturn roller
Roller and bushing in white acetal (POM)Outer surface in grey rubber
Bore
Diam
eter
Flang
e Di
amete
rø
2.76 i
n
Rolle
r Di
amete
rø
2.36 i
n
1.69 in1.56 in
FlangeClearance
0.14 in Bore Edge to FlangeLength Through Bore
PArt 614 - Marbett® Bi-material return roller
Photo shows a bi-material return roller with 1/2 inch shaft diameter, 1.61 inches length through bore, without flange.
Photo shows a bi-material return roller with 1/2 inch shaft diameter, 1.69 inches length through bore, with flange.
Drawing
Page 28
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Shaft Diameter (in) Bore Diameter (in)
657-656982 1/2 0.52
657-657002 5/8 0.65
657-656692 3/4 0.77
PAr
t 65
7 -
Mar
bett®
Bi-
mat
eria
l ret
urn
rol
ler
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Roller and bushing in white acetal (POM)Outer surface in grey rubber
Length Through Bore3.23 in
Roller Length2.99 in
Bore
Di
amete
r
Rolle
r Diam
eter
Ø 2.3
6 in
Inser
t Diam
eter
Ø 0.9
3 in
PArt 657 - Marbett® Bi-material return roller
Part Number Shaft Diameter (in) Bore Diameter (in)
555-632702 1/2 0.51
PAr
t 55
5 -
Mar
bett®
Gui
de F
lang
e
Internally lubricated black nylon (PA)Can be applied to rollers (Part 613)
Flang
e Diam
eter
ø 2.7
8 in
Bore
Diam
eter
Flange Thickness0.08 in
PArt 555 - Marbett® Guide Flange
Photo shows a bi-material return roller with 1/2 inch shaft diameter, 3.23 inches length through bore, without flange.
Photo shows Guide Flange internally lubricated black nylon.
Drawing
Marbett® Conveying Components Product Portfolio Page 29
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part NumberThread
Size
Handle Length
(in)
Height Diameter
Handle (in)
Base (in)
Shaft (in)
Hub (in)Base (in)
Hub (in)
302-60852 5/16-18 2.17 2.01 0.39 0.5500 1.46 0.59 0.79
302-60952 3/8-16 3.11 2.64 0.43 0.7900 1.89 0.79 1.10
PArt 302 - Marbett® ratchet Handle
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Handle in reinforced nylon (PA)Threaded insert in nickel plated brass
Handle Length
Hand
le He
ight
Shaft
Leng
htHu
b Heig
ht 30°
Handle Angle
Thread Size
Base DiameterHub Diameter
Base
He
ight
PArt 302 - M
arbett ® ratchet H
andle
Part NumberThread
SizeHandle Length
Height Diameter
Handle Base Shaft Hub Base Hub
303-60912 1/4”-20 1.57 in 1.57 in 0.28 in - 1.26 in 0.45 in 0.63 in
303-60922 M6 1.57 in 1.57 in 0.28 in - 1.26 in 0.45 in 0.63 in
PArt 303 - M
arbett ® ratchet H
andle
Handle in reinforced nylon (PA)Spindle in stainless steel
Base
Hei
ght
30°
Handle Length
Han
dle
Hei
ght
Hub
Hei
ght
Handle Angle
Thread Size
Base Diameter
Hub Diameter
Thre
adLe
ngth
PArt 303 - Marbett® ratchet Handle
Photo shows a ratchet handle with 5/16-18 threaded insert.
Photo shows a ratchet handle with an M6 threaded spindle.
Drawing
Page 30
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part NumberModule
Width Thickness
905-655711 2.62 in 0.75 in
PAr
t 90
5 -
Mar
bett®
Mod
ular
nos
e-o
ver
Bar
(Sta
ndar
d Pr
ofile
)
Marbett is a registered trademark of RexnordIndustries, LLC. All Rights Reserved.
Base in reinforced nylon (PA)Nosebar in moly filled nylonUses standard 5/16 in (M8) flat head screws (not included)
Hole Spacing(Length)1.50 in
1.50 in
Module Width2.62 in
Overall Length6.00 in
Modu
le Th
ickne
ss0.7
5 in
Hole
Spac
ing
(Widt
h)0.7
5 in
Moun
ting H
oleto
Fron
t of
Nose
-ove
r1.1
3 in
Hole diameterØ 0.33 in4 PLCS
PArt 905 - Marbett® Modular nose-over Bar (Standard)PA
rt
905
- M
arbe
tt® M
odul
ar n
ose-
ove
r Ba
r (L
ow P
rofil
e)
Base in reinforced nylon (PA)Nosebar in moly filled nylonScrews in stainless steel; Threaded insert in brass
Hole Spacing(Length)1.50 in
1.50 in
Overall Length6.00 in Hole Diameter
Ø 0.50 in4 PLCS
Module Width2.62 in
Moun
ting P
late T
hickn
ess
Modu
le Th
ickne
ss0.7
5 in
Hole
Spac
ing (W
idth)
0.75 i
n
Moun
ting H
ole to
Fron
t of N
ose-
over
1.13 i
n
PArt 905 - Marbett® Modular nose-over Bar (Low Profile)
Photo shows a standard profile nose-over bar without hardware.
Photo shows, a low profile nose-over bar, 1/4 inch mounting plate thickness, 1/4-20 hardware.
Part Number Mounting Plate Thickness (in) Hardware Size
905-655721 0.31 M6
905-655731 0.25 1/4-20
Marbett® Conveying Components Product Portfolio Page 31
Drawing
Product Information Additional notes
Drawing
Product Information Additional notes
Drawing
Product Information Additional notes
PArt 905 - M
arbett ® Modular n
ose-over Bar (d
ynamic)
Photo shows Marbett Dynamic Nose-over Bar.
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Base is UHMWPEE Uses standard 5/16 in (M8) flat head screws (not included)
Hole Spacing(Length)3.00 in
(76.2 mm)
Hole Spacing(Length)1.50 in
(38.1 mm)
Mod
ule
Thic
knes
s0.
75 in
(19.
1 m
m)
Hole
Spacing(W
idth)0.75 in
(19.1 mm
)
Mounting H
ole to Front of N
ose-over1.12 in
(28.3 mm
) ModuleWidth2.62 in
(66.5 mm)
Overall Length
Hole
Diameter
0.34 in
(8.6 mm)
PArt 905 - Marbett® Modular nose-over Bar (dynamic)
Part NumberModule
Thickness (in) Width (in) Length (in)
905-656231 0.75 2.62 18
905-656241 0.75 2.62 24
Drawing
Page 32
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Drawing
Product Information Additional notes
Part Number
Tube Pipe Wall Thickness
(in)
Thread Size
Flange Diameter
(in)
HeightMaximum Static Load
(lb)OD (in)
ID (in)
Lip (in)
Overall Insert
180-655741 2.00 1.72 0.109 3/4-10 1.97 0.35 2.20 in1.18
in1,800
PArt 180 - Marbett® tube End
Marbett is a registered trademark of RexnordIndustries, LLC. All Rights Reserved.
Bushing in reinforced nylon (PA)Threaded insert in nickel plated brass
Lip H
eight
Over
all Le
nght
Tube InsideDiameter
Inser
t Len
gth
Thread Size Flange Diameter
PAr
t 18
0 -
Mar
bett®
tub
e En
d
Part Number
Tube Pipe Wall Thickness
(in)
Thread Size
Flange Diameter
(in)
Height Maximum Static Load
(lb)OD (in)
ID (in)
Lip (in)
Overall (in)
Insert (in)
224-59241 2.00 1.80 0.109 3/4-10 1.91 0.39 2.17 1.18 1,800
224-59261 2.00 1.80 0.109 5/8-11 1.91 0.39 2.17 0.94 1,125
PAr
t 22
4 -
Mar
bett®
tub
e En
d
Bushing in reinforced nylon (PA)Threaded insert in nickel plated brass
PArt 224 - Marbett® tube End
Photo shows a tube end for round 2 inch tubing, 3/4-10 threaded insert.
Photo shows a tube end for square 2 inch tubing, 5/8-11 threaded insert.
Lip H
eight
Over
all Le
nght
Tube InsideDiameter
Inser
t Len
gth
Thread Size Flange Diameter
Drawing
Marbett® Conveying Components Product Portfolio Page 33
Drawing
Product Information Additional notes
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Thread SizeOverall Height
(in)Thread Height
(in)Spindle Type
133-636882 3/4-10 7.72 7.33 6b
133-64795 3/4-10 10.72 9.02 6
133-656081 M20 7.41 6.06 6b
133-67972 5/8-11 7.72 5.91 6
133-67982 3/4-10 7.72 5.91 6
PArt 133 - M
arbett ® Leveler
Photo shows Leveler with stainless steel nut and footplate in reinforced nylon.
Footplate in reinforced nylon (PA)All assemblies supplied with stainless steel nutAnti-slip pad also avaiable. Code no: 0-630052Material: Rubber (black), 70 shore
ø4.02 in
15 15
ø2.91 in
Mounting Hole Diameter
ø0.43" (2@ 180°)
Mounting holesobtained by breaking"diaphragm".
Thre
ad H
eight
Over
all H
eight
Footp
late
Web
Heig
ht0.7
5 in
Thread Size
Mounting Hole Spacing
Footplate Diameterø 24,5
6b
ø 24,5
6
PArt 133 - Marbett® Leveler
Part Number Thread SizeOverall Height
(in)Thread Height
(in)Spindle
Type
94-655081 3/4-10 7.70 5.91 6b
94-655101 3/4-10 7.70 5.91 6
94-655121 3/4-10 10.70 9.02 6
94-656071 M20 7.41 6.06 6b
PArt 94 - M
arbett ® teardrop Leveler
Photo shows Teardrop Leveler with stainless steel nut and footplate in reinforced nylon.
Marbett is a registered trademark of Rexnord Industries, Inc. All Rights Reserved.
Footplate in reinforced nylon (PA)All assemblies supplied with stainless steel nutAnti-slip pad also avaiable. Code no: 0-696171Material: Rubber (black), 70 shore
Overall Footplate Length3.74 in
Spindle Centerlineto Mounting Hole
1.97 in
Front Edgeto SpindleCenterline
1.18 in
Mounting Hole toBack Edge
0.59 in
Mounting Hole Diameterø0.47 in
Thre
ad H
eight
Over
all H
eight
Footp
late
Web
Heig
ht0.5
5 in
Thread Size15° 15°
Mounting holesare obtained by
breaking"diaphragm".
ø 24,5
6b6
ø 24,5
PArt 94 - Marbett® teardrop Leveler
Drawing
Page 34
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett® Conveying Components Product Portfolio
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Drawing
Product Information Additional notes
Drawing
Product Information Additional notes
Marbett is a registered trademark of Rexnord Industries, LLC. All Rights Reserved.
Part Number Thread SizeOverall Height
(in)Thread Height
(in)Spindle Type
323-650161 3/4-10 6.89 5.67 1a
323-655761 3/4-10 4.14 2.88 1a
Photo shows Leveler with stainless steel nut and footplate in reinforced nylon.
Marbett is a registered trademark of Rexnord Industries, Inc. All Rights Reserved.
Footplate in reinforced nylon (PA)All assemblies supplied with stainless steel nutAnti-Slip pad also available Code no.: 0-61632Material: Rubber (black), 70 Shore
ø2.13 in
Mounting Hole Diameter
ø0.35" (2@ 180°)
ø3.15 in
15° 15°
Mounting holesobtained by breaking"diaphragm".
Thre
ad H
eight
Over
all H
eight
Footp
late
Web
Heig
ht0.6
3 in
Thread Size
Mounting Hole Spacing
Footplate Diameter
ø 14,2
1a
PArt 323 - Marbett® Leveler
Part Number Thread SizeOverall Height
(in)Thread Height
(in)Spindle Type
479-651331 3/4-10 8.18 5.90 6
479-653131 5/8-11 8.18 5.90 6
479-653691 3/4-10 11.19 9.02 6
479-655941 3/4-10 8.18 5.90 6b
Photo shows Leveler with stainless steel nut and footplate in reinforced nylon.
Footplate in reinforced nylon (PA)All assemblies supplied with stainless steel nut
Mounting Hole Diameter
ø0.43" (2@ 180°)
ø3.27 inø4.33 in
15 15
Mounting holesobtainable by breaking"diaphragm".
Thre
ad H
eight
Over
all H
eight
Footp
late
Web
Heig
ht0.6
3 in
Thread Size
Mounting Hole Spacing
Footplate Diameter
ø 24,5
6b
ø 24,5
6
PArt 479 - Marbett® Leveler
PAr
t 32
3 -
Mar
bett®
Lev
eler
PAr
t 47
9 -
Mar
bett®
Lev
eler
Marbett® Conveying Components Product Portfolio Page 35
Drawing
Product Information Additional notes
Drawing
Product Information Additional notes
Spindle Material
Part NumberHeight
Thread Size Spindle TypeOverall (in)
Thread (in)
Stainless Steel
169-651741 7.60 5.44 1-8 21
Zinc Plated 169-651821 7.60 5.44 1-8 21
PArt 169 - M
arbett ® LevelerPArt 169 - Marbett® Leveler
Photo shows Leveler with footplate in reinforced nylon.
Marbett is a registered trademark of RexnordIndustries, Inc. All Rights Reserved.
Footplate in reinforced nylon (PA)All assemblies supplied with stainless steel nutAnti-slip pad also avaiable. Code no: 0-61653Material: Rubber (black), 70 shore
ø3.88 in
Mounting Hole Diameter
ø0.49" ( 2 @ 180°)
ø4.84 in
2° 2° Mounting holesare obtained by breaking"diaphragm".
Thr
ead H
eight
Over
all H
eight
Footp
late
Web
Heig
ht0.7
9 in
Thread Size
Mounting Hole SpacingFootplate Diameter
21
Marbett® Product Portfolio Numerical IndexPage 36
MArBEtt® Product PortFoLIo IndEx
Part 94
Part 114
Part 133
Part 169
Part 174
Part 180
Part 182
Part 210
Part 224
Part 255
Part 256
Part 257
Part 302
Part 303
Part 323
Part 367
Part 369
Part 371
Part 479
Part 518
Part 555
Part 557
Part 562
Part 567
Part 568
Part 569
Part 570
Part 595
Part
33
10
33
35
18
32
19
16-17
32
20
20
14
29
29
34
5
9
9
34
24
28
23
23
21
21
22
24
25
Page
Part 612
Part 613
Part 614
Part 672
Part 657
Part 902
Part 903
Part 905
GuIdE RAILs
Round
Convex
Flat
1” Flat
Neck
1” Tee
1-1/4” Tee
1.6” Tee
2-1/4” Tee
Edge
Tab Tee
L BRACkETs
Upper
Lower
Lower Type 2
Offset Upper Type B
Lower Type 3
Offset Upper Type A
Part
26
27
27
20
28
9
9
30-31
3
3
4
4
6
6
5
7
7
8
8
13
13
14
14
15
15
Page
Marbett® Conveying Components Product Portfolio Page 37
Page 38 Marbett® Conveying Components Product Portfolio
Page 39Marbett® Conveying Components Product Portfolio
World class customer ServiceFor more than 100 years, the dedicated people of Rexnord
have delivered excellence in quality and service to our
customers around the globe. Rexnord is a trusted name when
it comes to providing skillfully engineered products that
improve productivity and efficiency for industrial applications
worldwide. We are committed to exceeding customer
expectations in every area of our business: product design,
application engineering, operations, and customer service.
Because of our customer focus, we are able to thoroughly
understand the needs of your business and have the resources
available to work closely with you to reduce maintenance
costs, eliminate redundant inventories and prevent equipment
down time.
Rexnord represents the most comprehensive portfolio of power
transmission and conveying components in the world with the
brands you know and trust.
AUSTRALIARexnord Australia Pty LtdPicton, New South WalesPhone: 61-2-4677-3811Fax: 61-2-4677-3812
BRAZILRexnord Correntes Ltda.Sao Leopoldo - RSPhone: 55-51-3579-8022Fax: 55-51-3579-8029
CANADARexnord Canada Ltd.Scarborough, OntarioPhone: 1-416-297-6868Fax: 1-416-297-6873
CHINARexnord Conveyor Products (Wuxi) Co. Ltd.ShanghaiPhone: 86-21-62701942Fax: 86-21-627019433
FLATTOP EUROPERexnord FlatTop Europe b.v.‘s-Gravenzande, The NetherlandsPhone: 31-174-445-111Fax: 31-174-445-222
After Hours/Emergency Phone:31-174-445-112
Rexnord Marbett®, S.r.lCorreggio (RE), ItalyPhone: 39-0522-639333Fax: 39-0522-637778
RMCC Deutschland Kette GmbHAßlar-Werdorf, GermanyPhone: 49-6443-83140Fax: 49-6443-831420
Rexnord FlatTop FranceOrly CedexPhone: 33-1-4173-4220Fax: 33-1-4173-4229
MEXICORexnord FlatTopToll-Free Phone: 001-888-808-7787Fax: 1-262-376-4720
UNITED STATESCustomer ServicePhone: 1-866-REXNORD(1-866-739-6673)Fax: 1-614-675-1898E-mail: rexnordcs(state)@rexnord.comExample: [email protected]
Rexnord FlatTop North AmericaGrafton, WisconsinPhone: 1-262-376-4700Fax: 1-262-376-4720
Rexnord International - Power TransmissionMilwaukee, WisconsinPhone: 1-414-643-2366Fax: [email protected]
ALL COUNTRIES NOT LISTEDRexnord FlatTop Europe b.v.‘s-Gravenzande, The NetherlandsPhone: 31-174-445-111Fax: 31-174-445-222
After Hours/Emergency Phone:31-174-445-112
WORLDWIDE CUSTOMER SERVICE
Rexnord and Marbett are registered trademarks, and HP, ViseSplice, and ViseClamp are trademarks of Rexnord Industries, LLC. All rights reserved.
Rexnord FlatTop Europe b.v. [email protected] www.rexnordflattop.com
Rexnord FlatTop North America 1272 Dakota Drive Grafton, WI www.rexnord.com
©2009 Rexnord Industries, LLC
8mbCMPCAT-en 06/09 delzer Litho Printed in usA