MANUFACTURING
Manufacturers of Turnstiles, Automatic Vehicle Barriers, Mantraps, Security
Booths and Access Control Equipment
Manufacturers of Turnstiles, Automatic Vehicle Barriers, Mantraps, Security
Booths and Access Control Equipment
introduction
The barrier would be installed at an entrance/exit used by vehicles etc. It is renowned for the ability of handling a high flow of traffic.Description
The housing is manufactured from mild steel or stainless steel 3Cr12, epoxy powder coated, various colours are available on request.The mechanism is housed in the top of the housing, witch is easily accesses through a screw-off lid. The door in the front allows easy access to the logics that housed under the mechanism. A separate mounting base, hot dip galvanise, for easy installation and corrosion protection. Power: 220V AC 50Hz
MechanisM
A robust precision mechanism with block bearings is fitted with a 220V torque geared motor for reliable operation and secure locking. The motor and gearbox are enclosed in the same housing and are maintenance free.
Logic
The logics incorporate one Loop Detectors, additional Loop Detectors available on request
Features
• Separate Galvanised-mounting base for, rigidity, rust prevention on ground surface and ease of installation and maintenance
• Torque motor with concealed gearbox (maintenance free)• Printed circuit motherboard with 11pin base plug in connectors; fuse protection• In the event of a power failure the boom can be set to open automatically or stay in a closed position.
appLication
Transit facilities, Industrial facilities, Corporate facilities, Government facilities, Military facilities, Residentail complex
Cape Town:Address: 32 Sycamore Cresent, Atlas Park, Contermans KloofPostal Address: Po Box 759, Durbanville, 7551Tel: 021 556 3866 | Fax: 021 558 3868
Johannesburg Address: 53 Forge Road, Spartan, Kempton ParkPostal Address: Po Box 6850, Halfway House, 1685Tel: 011 975 6400 | Fax: 011 975 2237
Directors: GP Raubenheimer, DS van den Berg | Investage5 (Pty) Ltd t/a iMAT Manufacturing, Reg No: 2001/1015178/07
Automatic vehicle barrier
www.imat.co.za
BOOM 3D
Duard
2012/06/21
Drawn byDate
1 / 1
Sheet
A4
Size
Scale
iMAT Manufacturing
BOOM ASSEMBLY
Part Number
Description
MaterialTreatment
N.T.S.
Revision
This draw
ing is property of IM
AT m
anufacturing and m
ay not be used or executed w
ithout the w
ritten content of IM
AT m
anufacturing
BOOM DIMENSION
DUARD
2012/06/21
Drawn byDate
2 / 2
Sheet
A4
Size
Scale
iMAT Manufacturing
BOOM ASSEMBLY
Part Number
Description
MaterialTreatment
N.T.S.
Revision
CONCRETE BASE
500,00
500,00 500,00
BOOM DIMENSION
DUARD
2012/06/21
Drawn byDate
1 / 2
Sheet
A4
Size
Scale
iMAT Manufacturing
BOOM ASSEMBLY
Part Number
Description
MaterialTreatment
N.T.S.
Revision
1020,00
340,00280,00
926,00
360,00 300,00
340,00
280,00
176,72
176,72
50,00
BOOM BASE FOR MOUNTING
BOOM BODY DIMENSIONS
3CR12
POWDER COATED
PEDESTRIAN CURTAIN
Duard
2012/07/02
Drawn byDate
1 / 1
Sheet
A4
Size
Scale
iMAT Manufacturing
AUTOMATIC VEHICLE
BARRIER
Part Number
Description
MaterialTreatment
N.T.S.
Revision
This draw
ing is property of IM
AT m
anufacturing and m
ay not be used or executed w
ithout the w
ritten content of IM
AT m
anufacturing
970,00
3430,79
3000,00
700,01