Macalloy CHS Fork End
Apr 13
The Macalloy CHS Fork End can save time and cost compared to laser cutting and
welding T-piece connections.
The Macalloy CHS Fork End provides an
architectural, cost effective, alternative to
standard industry solutions for securing circular
hollow sections (CHS).
• Simple installation — fork end that can be welded
directly to a CHS with full penetration butt weld
• Cost and time savings compared to current CHS
fixing solutions
• Same profile as forks used on Macalloy tension
bars, stainless cables and adjustable
compression struts
• Can be supplied with standard Macalloy
architectural pin
• Common sizes available from stock, details
shown below
• Custom sizes and custom sizes including
different wall thicknesses available to order. See
over for details
• Can be galvanised and/or painted for corrosion
protection
For further information please contact your Macalloy
sales representative or contact Macalloy direct on
+44 1909 519200 or [email protected]
CHS Fork End welded to CHS, painted and with pin
Stock Sizes
macalloy.com
Material is minimum 54,300 psi yield strength with max CEV of 0.55%.
Standard sizes available for special order
Non standard sizes available to special order. Please contact Macalloy for details.
Component Dimensions
macalloy.com
