KugelhähneBall valves
Nr. 1000 - 1030
R55 ... / RA55 ...
bis DN 150: C22G2 (C22.8) 1.0460
ab DN 200: GP240GH (GS-C25) 1.0619
bis DN 100: C22G2 (C22.8) 1.0460
ab DN 150: GP240GH (GS-C25) 1.0619
bis DN 150: C22G2 (C22.8) 1.0460
ab DN 200: GP240GH (GS-C25) 1.0619
bis DN 100: C22G2 (C22.8) 1.0460
ab DN 150: GP240GH (GS-C25) 1.0619
C22G2 (C22.8) 1.0460
C22G2 (C22.8) 1.0460
R66 ... / RA66 ...
bis DN 50: X2CrNiMo17-12-2 1.4404
ab DN 65: GX5CrNiMo19-11-2 1.4408
bis DN 40: X2CrNiMo17-12-2 1.4404
ab DN 50: GX5CrNiMo19-11-2 1.4408
bis DN Rp 2: X2CrNiMo17-12-2 1.4404
ab DN Rp 2½:GX5CrNiMo19-11-2 1.4408
bis DN Rp 1½:X2CrNiMo17-12-2 1.4404
ab DN Rp 2: GX5CrNiMo19-11-2 1.4408
bis DN 50: X2CrNiMo17-12-2 1.4404
ab DN 65: GX5CrNiMo19-11-2 1.4408
bis DN 40: X2CrNiMo17-12-2 1.4404
ab DN 50: GX5CrNiMo19-11-2 1.4408
Gehäuse in dreiteiliger Ausführung, Sandwich-Bauweise, ausschwenkbares Gehäusemittelteil, Dichtelemente aus PTFE,Betätigung durch HandhebelAnschlussarten:• mit Schweißenden nach DIN 3239 • mit Gewindeenden nach ISO 7/1 • mit Flanschanschluss nach DIN 2501Ausführung:Standardausführung mit reduziertem Durchgang, wahlweise mit vollem Durchgang (integral).
Body in three-piece design, sandwich construction, central body part, sealing elements made of PTFE, operation with hand lever.Connection:• With welding ends acc. to DIN 3239 • With threaded ends acc. to ISO 7/1 • With flanged connection acc. to DIN 2501Design:Standard design with reduced bore, optional with full bore (integral).
MF-Kugelhähne PN 16/40
MF-Ball valves PN 16/40
Bestell-Nr.Order No.
...TCBS
...TCBS
...TCBG
...TCBG
...TCBF
...TCBF
DN
8-250
8-200
Rp¼-4
Rp¼-3
10-250
10-200
AusführungDesign
AnschlussConnection
reduzierter Durchgang
Reduced bore
voller Durchgang
Full bore
reduzierter Durchgang
Reduced bore
voller Durchgang
Full bore
reduzierter Durchgang
Reduced bore
voller Durchgang
Full bore
Schweißenden
Welding ends
Schweißenden
Welding ends
Gewindeanschluss
Threaded connection
Gewindeanschluss
Threaded connection
Flanschanschluss
Flanged connection
Flanschanschluss
Flanged connection
Gehäusewerkstoff / Body material
Ausführung mit Schweißenden (reduzierter Durchgang)Design with welding ends (reduced bore)
DN 10 - 50 DN 65 - 250
Ausführung mit GewindeanschlussDesign with threaded ends
DN Rp 3/8 - Rp 4
Detail: AntistatikDetail: antistatic
Ausführung mit Flanschanschluss (reduzierter Durchgang)Design with flanged connection (reduced bore)
DN 15 - 50 DN 65 - 250
KugelhähneBall valves
Nr. 1000 - 1030
R
DN
BaumaßeDimensions
KugelBall
GewindeausführungThreaded end design
ISO 7/1
SchweißendenausführungWelding end design
DIN 3239-Form 2 und/andDIN 2559 Form 22
DDIN 2501PN 16/40
L L4 L1 L2 H H1 D1 R L3 SW D3s
R55.s
R66.
reduzierter Durchgang / Reduced bore
voller Durchgang / Full bore
10 15 20 25 32 40 50 65 80
100 125 150 200 250
65 65
72,5 85,4 99,3
110,4 126,3 142,6 169,5 214 277 307 409 460
130 130 150 160 180 200 230 290 310 350 400 480 600 730
20,4 20,4 24,5 31,4 41,3 48,4 56,3 71,4 88,9
108,5 134,6 134,6 189,1 248
140140 140 180 180 200 200 250 480 480 480 480 720 800
55 55 57 74 77 89 94
110 161 176 190 190 262 310
90 90 92
110 115 135 140 155 161 176 190 190 262 310
11,1 11,1 14,2 20,6 25,4 31,7 38 50 62
82,4 100 100 150 200
Rp 3/8Rp 1/2Rp 3/4Rp 1
Rp 1 1/4Rp 1 1/2
Rp 2Rp 2 1/2
Rp 3Rp 4
----
13,5 16,5 17,5 20,5 20,5 24,5 25,5 30
31,5 39 ----
27 27 33 41 50 55 68 Ø Ø Ø ----
17,2 21,3 26,9 33,7 42,4 48,3 60,3 76,1 88,9
114,3 139,7 168,3 219,1 273
2 2 2
2,3 2,6 2,6 2,9 2,9 3,2 3,6 4
4,5 6,3 6,3
2 2 2 2 2 2 2
2,3 2,3 2,6 2,6 2,6 2,9 4
90 95
105 115 140 150 165 185 200 220 250 285 340 405
8 10 15 20 25 32 40 50 65 80
100 150 200
65 65
72,5 85,4 99,3
110,4 126,3 142,6 169,5 214 277 409 460
130 130 130 150 160 180 200 230 290 310 350 480 600
20,4 20,4 24,5 31,4 41,3 48,4 56,3 71,4 88,9
108,5 134,6 189,1 248
140 140 140 180 180 200 200 250 480 480 480 720 800
55 55 57 74 77 89 94
110 161 176 190 262 310
90 90 92
110 115 135 140 155 161 176 190 262 310
11,1 11,1 14,2 20,6 25,4 31,7 38 50 62
82,4 100 150 200
Rp 1/4Rp 3/8Rp 1/2Rp 3/4Rp 1
Rp 1 1/4Rp 1 1/2
Rp 2Rp 2 1/2
Rp 3---
13,5 13,5 16,5 17,5 20,520,5 24,5 26 30
31,5 -- -
27 27 33 41 50 55 68 ØØØ---
13,5 17,2 21,3 26,9 33,7 42,4 48,3 60,3 76,1 88,9
114,3 168,3 219,1
2 2 2 2
2,3 2,6 2,6 2,9 2,9 3,2 3,6 4,5 6,3
2 2 2 2 2 2 2 2
2,3 2,3 2,6 2,6 2,9
90 90 95
105 115 140 150 165 185 200 220 285 340
Pos.Item
Benennung Designation
1
2
3456789
101112131415
16
17181920212223
Gehäuse
Kugel
SchaltwelleGehäusedichtungDichtschaleSchaltwellendichtungStopfbuchsdichtungAnpressringTellerfederFeststellscheibeGehäuseschraubeGehäusemutterSchaltwellenmutterDistanzhülseStützring
Schweißende
FlanschHandhebelFeststellscheibeAnschlagGewindeendeScheibeSk.-Schraube
Body
Ball
StemBody sealingSeatStem sealingStuffing box sealingContact ringSpringLock washerBody screwBody nutStem nutDistance tubeCentre ring
Welded end
FlangeHand leverLock washerStop pinThreaded endDiscHex.-head screw
Werkstoff / Material
R55 / RA55 R66 / RA66C22G2 (C22.8)
GP240GH (GS-C25)
X2CrNiMo17-12-2 (bis DN 25)X20Cr13 (ab DN 32)X20Cr13PTFEPTFE / PTFE-GFKPTFE + GFPTFE + GF / AntistatikX2CrNiMo17-12-2X9CrNi18-8X2CrNi19-118.8 / A2-708 / A2-709S20PTFEPTFE + GFC22G2 (C22.8)
GP240GH (GS-C25)
C22G2 (C22.8)
C15X2CrNi19-11EN-GLMB-350-10 (GTS35)
C22G2 (C22.8)
X4CrNi18-10X4CrNi18-10
1.04601.06191.44041.40211.4021
----
1.44041.43101.4306
--
1.0711--
1.04601.06191.04601.04011.4306
EN-JM11301.04601.43011.4301
X2CrNiMo17-12-2GX5CrNiMo19-11-2X2CrNiMo17-12-2GX5CrNiMo19-11-2X2CrNiMo17-12-2PTFEPTFE / PTFE-GFKPTFE + GFPTFE + GF / AntistatikX2CrNiMo17-12-2X9CrNi18-8X2CrNi19-11A2-70A2-70X4CrNi18-10PTFEPTFE + GF
GX5CrNiMo19-11-2C15X2CrNi19-11GX5CrNi19-10X2CrNiMo17-12-2X4CrNi18-10X4CrNi18-10
1.44041.44081.44041.44081.4404
----
1.44041.43101.4306
--
1.4301--
1.44081.04011.43061.43081.44041.43011.4301
Baumaße / Dimensions
Werkstoffe / Materials
KugelhähneBall valves
Nr. 1000 - 1030
X2CrNiMo17-12-2 1.4404
Bestellbeispiel für Kugelhähne in 3-Wege-FormExample to order ball valves in 3-way-form
Seitenanschluss links, Code siehe untenSide connection on the left, code refer to bottom
Seitenanschluss rechts, Code siehe untenSide connection on the right, code refer to bottom
mittlerer Anschluss, Code siehe untenMiddle connection, code refer to bottom
Lage des mittleren AnschlussesPosition of the middle connection H = horizontal / V = vertikal
Kugelbohrung / Ball bore L = L-Form / T = T-Form
Werkstoff / Material5 = Stahl / Steel6 = Edelstahl / Stainless steel
Ausführung 3-Wege-FormDesign 3-way-form
mit Aufbauflansch nach DIN ISO 5211With mounting flange acc. to DIN ISO 5211
Gehäuseform 3-teilig, zur HandbetätigungBody in three-piece design, for manual operatin
Typ / Type R A 3 6 L H 4 1 1
Code für Anschlussarten / Code for connections1 = Schweißenden / Welding ends2 = Innengewinde nach ISO 7/1 / Inside thread acc. to ISO 7/1
3 = NPT-Gewinde / NPT-threaded ends4 = Flanschanschluss / Flanged connection
Ausführung in 3-Wege-Form mit Flanschanschluss(Abmessungen wie Durchgangsform)Design in 3-way-form with flanged connection(dimensions also straight through form)
Ausführung in 3-Wege-Form mit Schweißenden(Abmessungen wie Durchgangsform)Design in 3-way-form with welding ends(dimensions also straight through form)
reduzierter DurchgangReduced borevoller DurchgangFull boreAA1
DN
DN
10
8
15
10
20
15
25
20
32
25
40
32
50
40
65
50
80
65
100
80
125
-
150
100
200
150
250
200
5085
5090
6095
60100
75105
80115
90125
125145
145155
155175
175200
200225
240275
--
KugelhähneBall valves
Nr. 1000 - 1030
Illustrated in a 90° shifted position
Illustrated in a 90° shifted position
Schaltbeispiele zum Kugelhahn in 3-Wege-FormDiagram of connections for ball valves in 3-way-form
Schaltschema (Draufsicht) TH-BohrungDiagram of connection (top view) TH-bore
Schaltschema (Draufsicht) LH-BohrungDiagram of connection (top view) LH-bore
Bitte beachten Sie, dass der mittlere Anschlussder Kugel nicht separat abgedichtet ist. Dadurch kann bei der T-Bohrung das Medium die Kugel umströmen und am mittleren Abgang austreten (siehe Skizze).
Please note, that the middle connection of the ball does not tightened separately. Due to that the medium can overflow the ball when having a T-bore and penetrate the middle exit.
Druck- und Temperaturdiagramm für Venturi-HähnePressure and temperature diagram for Venturi-Valves
Druck- und Temperaturdiagramm für Integral-HähnePressure and temperature diagram for Integral-Valves
Bei Bestellung bitte gewünschte Schaltstellung angeben!In case of an order, please advise the indexing position!
KugelhähneBall valves
Nr. 1000 - 1030
Die Dreiwegekugelhähne sind für einen maximalen Differenzdruck von ∆p = 6 bar ausgelegt. The ball valves in 3-way-form are designed for a maximum differential pressure by ∆p = 6 bar.
Kaltwasserdurchsätze und K -Werte für KugelhähneVS
Werte für Venturi-Ausführung (reduzierter Durchgang)Cold water flow and K -values for ball valvesVS
Values for venturi design (reduced bore)
Druckdifferenz in mWSDifferential pressure in mWS
Du
rch
fluss
in m
³/h
Flo
w in
m³/
h
K-W
ert
e in
m³/
hV
S
K v
alu
es
in m
³/h
VS
Differenzdruck in barDifferential pressure in bar
KugelhähneBall valves
Nr. 1000 - 1030
Serie "RA" mit Aufbauflansch nach DIN ISO 5211(auch mit vollem Durchgang lieferbar)
Design "RA" with mounting flange acc. to DIN ISO 5211(also with full bore available)
reduzierterDurchgang
Reduced bore
vollerDurchgang
Full bore
RA . . . AusführungRA . . . Design
10
15
20
25
32
40
50
65
80
100
125
150
200
250
8
10
15
20
25
32
40
50
65
80
-
100
150
200
40
40
42
53
58
71
76
86
153
168
182
182
258
305
30
30
32
38
36
42
46
70
99
114
128
128
186
232
6
6
6
13
13
17
17
17
17
17
17
17
28
28
5,4
5,4
5,4
7,5
7,5
8,9
8,9
8,9
19
19
19
19
28,5
30
25
25
25
30
30
35
35
55
55
70
70
70
85
100
36
36
36
42
42
50
50
70
70
102
102
102
125
140
22
22
22
25
25
30
30
45
45
64
64
64
65
-
4xM5
4xM5
4xM5
4xM5
4xM5
4xM6
4xM6
4xM8
4xM8
4xM10
4xM10
4xM10
4xM12
4xM16
9,5
9,5
9,5
11
11
14,3
14,3
14,3
22,5
22,5
22,5
22,5
35
38
F03
F03
F03
F04
F04
F05
F05
F07
F07
F10
F10
F10
F12
F14
DN DN H3 H4 H5 B D2 f8 D3 D5 D4 A ISO 5211
venturi
-
15
20
25
32
40
50
integral
8
10
15
20
25
32
40
Md
(Nm)
+/-20%
5
5
6
11
18
24
30
30
30
30
70
70
170
170
venturi
65
80
100
125
150
200
integral
50
65
80
100
-
150
Md
(Nm)
+/-20%
60
95
150
210
210
310
170
530
530
530
530
1700
DN DN
Drehmomente / Torques
Die Drehmomente Md zum Betätigen der Kugelhähne sind obere Durchschnittswerte laufender Messungen.Das Anfahrdrehmoment ist hierin berücksichtigt. Sie beziehen sich auf den drucklosen Zustand und können je nach Medium, Temperatur, Druck und Schalthäufigkeit variieren.
The torques Md for the operation of the ball valves are the upper mean values of current measurements. The starting torque has already been considered. These values refer to the unpressurized condition and can vary depending on medium, temperature, pressure and shift frequency.
KugelhähneBall valves
Nr. 1000 - 1030
Md zulässig
Allowable
(Nm)
Md zulässig
Allowable
(Nm)
Friedrich Krombach GmbH & Co. KG � Armaturenwerke � D-57202 Kreuztal � Postfach 1130Telefon (0 27 32) 520-00 � Telefax (0 27 32) 520 100 � http//www.krombach.com � e Mail: [email protected]
Lochbild-Abmessungen der Schweiß-, Flanschund GewindeanschlüsseDimensions of master gauge for holes of the welded connection, flanged connection and threaded connection
Form A Form CForm B
venturi
15
20
25
32
40
50
65
80
100
125
150
200
250
integral
10
15
20
25
32
40
50
65
80
-
100
150
200
6,5
8,5
8,5
8,5
10,5
10,5
13
13
15
15
15
19
22
45
53
62,8
71,8
80,9
94,2
R/RA55:119,5
R/RA66:114
140
175
206
206
314
388
4xM6
4xM8
4xM8
4xM8
4xM10
4xM10
6xM12
6xM12
8xM14
8xM14
8xM14
8xM18
10xM20
A
A
A
A
A
A
B
B
C
C
C
C
C
C
DN +0,2Ø D
±0,1Ø dk
Anzahl und Größeder Schrauben
Quantity and height of the screws
AusführungDesign
Lieferbare Sonderausführungen :
• mit Heizmantel• mit Gewindeanschluss nach NPT• mit Schweißenden nach DIN 11850• mit Schaltwellenverlängerung• in Fire-safe-Ausführung nach BS 6755• mit Kleinflansch nach DIN 28403• andere Werkstoffe• mit Einsteck-Schweißenden
Available special designs:
• With heating jacket• With NPT-threaded ends• With welded ends acc. to DIN 11850• With stem extension• In fire-safe design acc, to BS 6755• With small flange acc. to DIN 28403• Other materials• With socket-weld ends
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1000 - 1030
09/05
Gehäuse in zweiteiliger Ausführung, voller Durchgang, firesafe-Design,mit antistatischer Ableitung, Schaltwelle ausblassicher, mit Aufbauflansch für Antriebe nach DIN-ISO 5211,mit Handhebelbetätigung.Flanschanschlussmaße nach DIN 2501. Baulänge nach EN 558-1, Reihe 11.
FK-Kompakt-Kugelhähne zum Einklemmen zwischen Flanschen PN 16 bis PN 160
FK-Compakt ball valves to clamp between flanges PN 16 up to PN 160Body in two-piece design, full bore, fire-safe design,with antistatic conductance, stem blow-off-proof, with mounting flange for actuators acc. to DIN-ISO 5211,with manual operation.Flange dimensions acc. to DIN 2501. Face to face dimension acc. to EN 558-1, series 11.
Bestell-Nr.Order No.
PNWerkstoffMaterial
Werkstoff-Nr.Material No.
DichtleisteSealing surface
KH 1046
KH 1047
KH 1048
KH 1049
16/40
16/40
63-160
63-160
Schmiedestahl
Edelstahl
Schmiedestahl
Edelstahl
Forged steel
Stainless steel
Forged steel
Stainless steel
C22G2 (C22.8)
X6CrNiMoTi17-12-2
C22G2 (C22.8)
X6CrNiMoTi17-12-2
1.0460
1.4571
1.0460
1.4571
DIN 2526 Form C
DIN 2526 Form C
DIN 2526 Form E
DIN 2526 Form E
KugelhähneBall valves
Nr. 1045
nxd
Ausführung PN 16/40Design PN 16/40
Ausführung PN 63 - 160Design PN 63 - 160
KugelhähneBall valves
Nr. 1045
AufbauflanschMounting flangeDIN ISO 5211
GewichtWeight
[kg]DN PN
BaumaßeDimensions
FlanschanschlussFlange connection
L L1 h1 H2 D k nxd t t1
KH 1046, KH 1047 (PN 16/40)
KH 1048, KH 1049 (PN 63 - 160)
15
20
25
32
40
50
65
80
100
15
25
40
50
65
80
100
16/40
16
40
16/40
16
40
63-160
63
100
160
63
100
160
63
100
160
63
100
57
64
70
76
83
102
108
108
121
146
146
180
180
180
280
280
280
400
400
400
480
480
36,5
38
41
58
64
71
81
81
90
111
111
80
82
86
115
120
125
140
140
160
176
176
95
105
115
140
150
165
185
185
200
240
240
65
75
85
100
110
125
145
145
160
180
190
4xØ14
4xØ14
4xØ14
4xØ18
4xØ18
4xØ18
4xØ18
8xØ18
8xM16
8xM16
8xM20
-
-
-
-
-
-
-
-
25
24
24
-
-
-
-
-
-
-
-
-
-
-
F04
F04
F04
F05
F05
F05
F05
F05
F10
F10
F10
3,0
4,2
5,4
8,7
10,6
15,5
20,0
20,0
25,3
42,8
42,8
57
70
83
102
102
102
108
108
108
121
121
121
146
146
180
180
280
280
280
280
400
400
400
400
400
400
480
480
43
58
64
93
93
93
95
95
95
98
98
98
115
115
80
86
120
125
125
125
140
140
140
160
160
160
176
176
105
140
170
180
195
195
205
220
220
215
230
230
250
265
75
100
125
135
145
145
160
170
170
170
180
180
200
210
4xØ14
4xØ18
4xØ22
4xØ22
4xØ26
4xØ26
8xØ22
8xØ26
8xØ26
8xM20
8xM24
8xM24
8xM24
8xM27
-
-
-
-
-
-
-
-
-
26
31
31
31
42
-
-
-
-
-
-
-
-
-
25
25
25
25
25
F04
F04
F05
F07
F07
F07
F10
F10
F10
F10
F10
F10
F10
F10
3,8
8,2
13,8
18,8
22,3
22,3
25,2
29,4
29,4
29,9
34,9
34,9
47,3
54,2
Baumaße und GewichteDimensions and weights
WerkstoffeMaterials
Pos.Item
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
Benennung
Gehäuse
Flanschteil
Schaltwelle
Gehäusedichtung
Dichtschale
Schaltwellendichtung
Stopfbuchsdichtung
Druckring
Sicherungsblech
Schaltwellenmutter
Zylinderschraube
Handhebel
Anschlagschraube
Handhebelmutter
Tellerfeder
Body
Flange part
Stem
Body sealing
Seat
Stem sealing
Stuffing box sealing
Pressure ring
Locking plate
Stem nut
Filliste head screw
Hand lever
Stop screw
Hand lever nut
Cup-spring
Designation
KH 1046, KH 1048 KH 1047, KH 1049
WerkstoffMaterial
Werkst.-Nr.Mat. No.
WerkstoffMaterial
Werkst.-Nr.Mat. No.
C22G2 (C22.8)
C22G2 (C22.8)
X6CrNiMoTi17-12-2
GX5CrNiMo19-11-2
X2CrNiMoN22-5-3
PTFE
PTFE / PTFE
PTFE-Kohle / Coal
PTFE / PTFE
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
A4
8.8 (A2-70)
St
8.8
A4
51CrV4
1.0460
1.0460
1.4571
1.4408
1.4462
-
-
-
-
1.4571
1.4571
-
-
-
-
-
1.8159
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
GX5CrNiMo19-11-2
X2CrNiMoN22-5-3
PTFE
PTFE / PTFE
PTFE-Kohle / Coal
PTFE / PTFE
X6CrNiMoTi17-12-2
X6CrNiMoTi17-12-2
A4
A4-70
X6CrNiMoTi17-12-2
A4-70
A4
X9CrNi18-8
1.4571
1.4571
1.4571
1.4408
1.4462
-
-
-
-
1.4571
1.4571
-
-
1.4571
-
-
1.4310
leitfähigconductive
leitfähigconductive
3 Kugel Ball
KugelhähneBall valves
Nr. 1045
-Kohle-Coal
-Kohle-Coal
Friedrich Krombach GmbH & Co. KG � Armaturenwerke � D-57202 Kreuztal � Postfach 1130Telefon (0 27 32) 520-00 � Telefax (0 27 32) 520 100 � http//www.krombach.com � e Mail: [email protected]
Andere Druck-Temperaturbereiche sind durch die Wahl anderer Dichtungswerkstoffe möglich.Other pressure-temperature ranges are possible if othersealing materials are choose.
Bei Temperaturen unter -10°C bitte AD-Merkblatt W 10 beachten.At temperatures less -10°C please heed to AD-Merkblatt W10
The starting torque is considerably influenced by the number of the Das Anfahrmoment wird erheblich durch die Schalthäufigkeit shift frequency.beeinflusst.The smaller value of the table corresponds to shift frequency.Der kleinere Wert der Tabelle entspricht häufiger Schaltung.The greater value corresponds to a longer down time.Der größere Wert entspricht längerem Stillstand.
ATTENTION!ACHTUNG!If non-lubrication mediums (i.e. benzine, gases) or adhesive mediums Bei nicht schmierenden Medien (z.B. Benzine, Gase) oder
anhaftenden Medien ist eine entsprechende Erhöhung der Werte zu are used an increasing of the values has to be considered.berücksichtigen
Prüfdrücke Test pressuresGehäuse: 1,5 x PN Wasser, 6 bar Luft Body: 1,5 x PN water; 6 bar airAbschluss: 1,0 x PN Wasser, 6 bar Luft Seat: 1,0 x PN water; 6 bar air
Die k -Werte bei Kugelhähnen mit vollem Durchgang entsprechen The k -values of ball valves with full bore correspond to the VS VS
den vergleichbaren Rohrlängen mit gleichem Durchmesser comparable pipe lengths with the same diameter.
Lieferbare Sonderausführungen: Special designs:• andere Werkstoffe • Other materials• mit Heizmantel • With heating jacket (only face-to-face dimensions F17)• mit Schaltwellenverlängerung • With stem extension• mit elektrischem, pneumatischem oder hydraulischem Antrieb • With electric, pneumatic or hydraulic actuator• mit anderer Flanschbearbeitung • With other flange design• mit Druckentlastungsbohrung • With pressure relief bore
Betr
iebs
druc
k [b
ar]
Wor
king
pre
ssur
e [b
ar]
Betriebstemperatur [°C]Working temperature [°C]
Anfahrdrehmomente [Nm] - Richtwerte für schmierende Medien (z.B. Wasser, Öle bei 20°C)Starting torques [Nm] - Standard values for lubricated mediums (i.e. water, oils at 20°C)
Differenzdruck [bar] / Differential pressure [bar]
DN152025324050656580
100
PN16-16016-40
16-16016-40
16-16016-16016-40
63-16016-16016-100
bis 1010...1312...1615...2030...3835...4350...6560...7860...7870...91
100...130
1611...1513...1716...2132...4137...4853...6863...8263...8274...96
105...137
2511...1513...1716...2133...4339...5055...7266...8666...86
77...100110...143
4012...1614...1817...2235...4540...5258...7569...9069...90
81...105115...150
6313...17
-18...23
-42...5561...79
-72...94
111...144205...267
10014...18
-19...25
-44...5764...83
-96...125
162...211312...406
16015...20
-20...26
-46...6073...95
-144...187244...317
-
446262
115115115115450450450
Druck-Temperatur-ZuordnungPressure-temperature-rating
10/05
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1045
Md.zulässig
Mt.Allowable
Kugelhähne mit Pneumatik-Antrieb
Nr. 1301
Ball valves with pneumatic actuator
Kugelhähne mitPneumatik-Schwenkantrieb "AMG"• FK-Kugelhähne gemäß Prospekt 1025/1035
mit Flanschanschluss PN 16 bis PN 40, Gehäuse in2teiliger Ausführung, voller Durchgang, firesafe-Design,mit antistatischer Ableitung, Schaltwelle ausblassicher
• MF-Kugelhähne gemäß Prospekt 1000-1030Gehäuse in 3-teiliger Ausführung, Sandwich Bauweise,ausschwenkbares Gehäusemittelteil,Anschluss: mit Schweißenden nach DIN 3239
mit Gewindeenden nach DIN 2999mit Flanschanschluss nach DIN 2501
Ball valves withpneumatic actuator "AMG"• FK-Ball valves acc. to leaflet 1025/1035
with flanged connection PN 16 up to PN 40, Body in2-piece design, full bore, fire-safe design,with anti-static conductance, stem blow-off proof
• MF-Ball valves acc. to leaflet 1000-1030Body in 3-piece design, sandwich construction,central body part,Connection: with welding ends acc. to DIN 3239
with threaded ends acc. to DIN 2999with flanged connection acc. to DIN 2501
KurzbaulängeDIN-EN 558-1, Reihe 27LangbaulängeDIN-EN 558-1, Reihe 28KurzbaulängeDIN-EN 558-1, Reihe 27LangbaulängeDIN-EN 558-1, Reihe 28reduzierter Durchgang,Schweißendenvoller Durchgang,Schweißendenreduzierter Durchgang,Gewindeanschlussvoller Durchgang,Gewindeanschlussreduzierter Durchgang,Flanschanschlussvoller Durchgang,Flanschanschluss
Short dimensionDIN-EN 558-1, line 27Long dimensionDIN-EN 558-1, line 28Short dimensionDIN-EN 558-1, line 27Long dimensionDIN-EN 558-1, line 28Reduced bore,welding endsFull bore,welding endsReduced bore,threaded endsFull bore,threaded endsReduced bore,flanged connectionFull bore,flanged connection
KH 1026 B
KH 1027B
KH 1036B
KH 1037B
RA 55 TCBS
RA 66 TCBS
RA 55 TCBG
RA 66 TCBG
RA 55 TCBF
RA 66 TCBF
Bestell-Nr.:
Fig.-no.:Ausführung
Werkstoff
Material
Werkstoff-Nr.:
Material-Nr.:
GX5CrNiMo19-11-2 1.4408
1.4408
GP240GH (GS-C 25)
GP240GH (GS-C 25)
1.0619
1.0619
C22G2 (C22.8)
1.0460GP240GH (GS-C 25)
1.0619
X2CrNiMo17-12-2
GX5CrNiMo19-11-2
1.4404GX5CrNiMo19-11-2 1.4408
C22G2 (C22.8) 1.0460GP240GH (GS-C 25) 1.0619
X2CrNiMo17-12-2 1.4404GX5CrNiMo19-11-2 1.4408
C22G2 (C22.8) 1.0460GP240GH (GS-C 25) 1.0619
X2CrNiMo17-12-2 1.4404GX5CrNiMo19-11-2 1.4408
Design
Ausführung KH 1025 / 1035Design KH 1025 / 1035
DN 15 - 100 PN 16 - 40DN 150, 200 PN 10 - 16
DN 150 - 300, PN 25 - 40
Ausführung KH 1000 / 1030Design KH 1000 / 1030
DN 10 - 65 DN 8 - 50reduzierter Durchgang voller DurchgangReduced bore Full bore
DN 80 - 200 DN 65 - 200reduzierter Durchgang voller DurchgangReduced bore Full bore
Kugelhähne mit Pneumatik-Antrieb
Nr. 1301
Ball valves with pneumatic actuator
Baumaße / DimensionsKH 1025/1035 6 bar Steuerdruck /
DN PN L1 L2 H A Type H A Type
15 16-40 115 130 222 124 SAD010 240 186 SAF015
16 120 150 227 124 SAD010 244 186 SAF01520
40 120 150 227 124 SAD010 265 183 SAF020
16 125 160 232 124 SAD010 249 186 SAF01525
40 125 160 232 124 SAD010 270 183 SAF020
16 130 180 270 138 SAD015 291 183 SAF02032
40 130 180 270 138 SAD015 318 251 SAF025
16 140 200 273 138 SAD015 321 251 SAF02540
40 140 200 273 138 SAD015 321 251 SAF025
16 150 230 281 138 SAD015 330 251 SAF02550
40 150 230 281 138 SAD015 330 251 SAF025
16 170 290 312 153 SAD020 340 251 SAF02565
40 170 290 312 153 SAD020 354 230 SAF030
16 180 310 360 153 SAD020 400 282 SAF03080
40 180 310 360 153 SAD020 400 230 SAF030
16 190 350 406 195 SAD025 450 400 SAF033100
40 190 350 406 195 SAD025 465 470 SAF035
16 325 400 440 230 SAD030 485 470 SAF035125
25-40 325 400 470 270 SAD033 575 572 SAF042
16 350 450 540 286 SAD035 708 572 SAF042150
25-40 350 450 671 290 SAD040 742 747 SAF045
16 400 550 757 382 SAD042 860 987 SAF050200
25-40 400 550 757 382 SAD042 757 572 SAF045
16 450 650 730 457 SAD045 730 572 SAF045250
25-40 450 650 780 557 SAD050 785 987 SAF050
16 500 750 935 557 SAD050 - - -300
25-40 500 750 935 557 SAD050 - - -
6 bar control pressure
KH 1000-1030 (reduzierter Durchgang)6 bar Steuerdruck /KH 1000-1030 (Reduced bore) 6 bar control pressure
Flanges Welding ends
Flansche Schweißenden
DN
venturi L L1 H A Type H A Type
10 130 65 164 84 SAD005 204 124 SAF010
15 130 65 164 84 SAD005 204 124 SAF010
20 150 72,5 166 84 SAD005 206 124 SAF010
25 160 85,4 172 84 SAD005 229 186 SAF015
32 180 99,3 210 124 SAD010 228 186 SAF015
40 200 110,4 216 124 SAD010 254 183 SAF020
50 230 126,3 237 138 SAD015 285 251 SAF025
65 290 142,6 261 138 SAD015 309 251 SAF025
80 310 169,5 338 195 SAD025 362 282 SAF030
100 350 214 373 195 SAD025 416 400 SAF033
125 400 277 402 230 SAD030 425 470 SAF035
150 480 307 402 230 SAD030 445 470 SAF035
200 600 409 488 270 SAD033 552 506 SAF040
KH 1000-1030 (voller Durchgang)6 bar Steuerdruck /KH 1000-1030 (Full bore) 6 bar control pressure
Flanges Welding ends
Flansche Schweißende
DN
integral L L1 H A Type H A Type
8 130 65 164 84 SAD005 204 124 SAF010
10 130 65 164 84 SAD005 204 124 SAF010
15 130 72,5 166 84 SAD005 206 124 SAF010
20 150 85,4 172 84 SAD005 229 186 SAF015
25 160 99,3 210 124 SAD010 228 186 SAF015
32 180 110,4 216 124 SAD010 254 183 SAF020
40 200 126,3 237 138 SAD015 285 251 SAF025
50 230 142,6 261 138 SAD015 309 251 SAF025
65 290 169,5 338 195 SAD025 362 282 SAF030
80 310 214 373 195 SAD025 416 400 SAF033
100 350 277 402 230 SAD030 445 470 SAF035
Antrieb doppeltwirkendActuator double acting
Antrieb einfachwirkendActuator single acting
Antrieb doppeltwirkend
Actuator double acting
Antrieb doppeltwirkend
Actuator double acting
Antrieb einfachwirkend
Actuator single acting
Antrieb einfachwirkend
Actuator single acting
Kugelhähne mit Pneumatik-Antrieb
Nr. 1301
Ball valves with pneumatic actuator
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130� � �
Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]� � �
Ausführung mit MagnetventilDesign with solenoid valve
Ausführung mit EndschalterDesign with limit switch
Antrieb TypA B C
SAF/SAD 005-042 120 80 100
SAF/SAD 045-050 120 80 110
Actuator type
SchließzeitenClosing times
Antrieb doppeltwirkend Antrieb einfachwirkend
Typ Schließzeit Luftverbrauch Typ Schließzeit Luftverbrauch
sec dm³ sec dm³
SAD 005 0,5 0,05 SAF 005 1,0 0,05
SAD 010 0,5 0,15 SAF 010 1,0 0,15
SAD 015 0,5 0,35 SAF 015 1,5 0,35
SAD 020 1,0 0,50 SAF 020 2,0 0,50
SAD 025 1,5 1,00 SAF 025 2,5 1,00
SAD 030 1,5 1,50 SAF 030 6,0 1,50
SAD 033 2,0 2,70 SAF 033 6,5 2,90
SAD 035 2,5 3,30 SAF 035 8,0 3,50
SAD 040 4,0 5,30 SAF 040 11,0 5,80
SAD 042 7,0 8,50 SAF 042 14,0 9,00
SAD 045 8,0 12,20 SAF 045 20,0 12,60
SAD 050 14,0 21,10 SAF 050 28,0 22,10
Actuator double acting Actuator single acting
Type Time to close Air consumption Type Time to close Air consumption
06/04
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge derWeiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to usematerials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
Kugelhähne mit Pneumatik-Antrieb
Nr. 1301
Ball valves with pneumatic actuator
KugelhähneBall valves
Nr. 1060
FK-Kugelhähne PN 40 - PN 63 Mit Gewinde nach ISO 7/1 (DIN 2999, Teil 1), mit vollem Durchgang, Dichtschalen aus PTFE , doppelseitig dichtend, Schaltwellenabdichtung durch PTFE-Dichtringe, Schaltgriff aus nichtrostendem Edelstahl (1.4021), mit gelbem Plastiküberzug oder aus Leichtmetall.
FK ball valves PN 40 - PN 63
With threaded ends acc. to ISO 7/1 (DIN 2999, part 1), with full bore, PTFE seats, double sided sealed, stem sealing by PTFE sealing rings, operating handle mach of rustproof stainless steel (1.4021) with yellow plastic cover or made of light-metal.
Bestell-Nr.Order no.
Ausführung Design
Werkstoffe / Materials
Gehäuse, SchaltwelleBody, Stem
KugelBall
KH 1061 T
KH 1062 T
beiderseits Muffenanschluss
Muffe / AußengewindeCuZn39Pb3 (MS 58)
2.0401vernickelt
Nickel-plated
CuZn39Pb3 (MS 58)
2.0401hartverchromt
Hard chrome-plated
Both sides with female screwed ends
One side with female threaded end other side withmale threaded end
Both sides with female threadedends in oil and grease free designwith stem extension for insulation (to Rp 2")
beiderseits Muffenanschluss,mit Schaltwellenverlängerunggeeignet zur Isolierung (-bis Rp 2")
Kh 1063 T
Friedrich Krombach GmbH & Co. KG � Armaturenwerke � D-57202 Kreuztal � Postfach 1130Telefon (0 27 32) 520-00 � Telefax (0 27 32) 520 100 � http//www.krombach.com � e Mail: [email protected]
* Abmessung bei Schaltwellenverlängerung / Dimensions with stem extension
DNE C
t 1 l Lt 2 SW
Gewicht in gWeight in g
1061,1062 1061,1062 1061,10621063* 1063* 1063
Rp 1/4
Rp 3/8
Rp 1/2
Rp 3/4
Rp 1
Rp 1 1/4
Rp 1 1/2
Rp 2
Rp 2 1/2
Rp 3
95
95
95
115
115
155
155
175
215
232
110
110
110
130
130
160
160
188
-
-
41
42
44
54
59
75
81
97
114
136,5
102,5
103,5
106
120
124,5
141
147,5
170
-
-
10
11,4
15
16,3
19,1
21,4
21,4
25,7
30.1
38
12
13,5
18
19
23
25
25
29
34
42
22
24,5
31
35
43
49
53
63
76
88
44
49
62
70
86
98
106
126
152
177
19
21
25
31
39
48
54
67
86
100
126
130
190
310
520
845
1095
1835
3400
5200
180
185
250
430
650
1050
1350
2450
-
-
Teil123456789
BennenungGehäuseMuffenanschlussKugelSchaltwelleDichtschalenDichtungSchaltwellendichtungStopfbuchsmutterSechskantmutterGriff mit gelbem Plastiküberzugoder aus Aluminium bei KH 1063 T
DesignationBodySocket connectionBallStemSeatSealingStem sealingStuffing box nutHex.-nutHandle with yellow plastic cover or light-metal
Werkstoffe / MaterialsCuZn39Pb3CuZn39Pb3CuZn39Pb3CuZn39Pb3PTFEPTFEPTFECuZn39Pb3CuZn39Pb3X20Cr13
2.04012.04012.04012.0401---2.04012.04011.4021
10
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1060
Einsatzbereich für Serien-Ausführung mit Teflon-Dichtgarnitur:• Wasser im Temperaturbereich von 4°C bis 160° C• gesättigter Dampf• Druckluft• Gas• Öl, Kraftstoffe mit hohem Benzolanteil, Heizöl• Lösungsmittel, Farben, Lacke,• in bedingtem Umfang auch schwache Laugen und Säurenmax. Einsatzbereich von -40°C bis + 200° CVakuumdicht bis 10 Torr.-3
Application range for valves for standard design with Teflon sealing • Water of the temperature range from 4°C up to 160°C• Saturated steam• Compressed air• Gas• Oil, fuels with a high percentage of benzine, fuel oil • Solvents, paints and varnishes• Even weak acids and alkaline solutions to a limited extentMax. application range from -40°C up to +200°C,Vacuum tightness up to 10 Torr-3
Wo
rkin
g p
ress
ure
in k
g/c
m²
Working temperature in °C
09/05
Gehäuse aus Pressmessing vernickelt, mit angepresstem Aufbauflansch, Kugel aus Messing verchromt, mit vollem Durchgang, Dichtschalen aus PTFE, doppelseitig dichtend, Schaltwellenabdichtung durch O-Ringe aus Viton,Baulänge nach DIN 3202 M3, Gewinde nach ISO 7/1 (DIN 2999, Teil 1), mit Kupplungsstück aus Stahl verzinkt.
FK-Kugelhähne PN 40 nach DIN 3357
FK-ball valve PN 40 acc. to DIN 3357FK-ball valve made of brass nickel-plated, with pressed mounting flange, ball made of brass chrome-plated, with full bore, seat made of PTFE, double sided sealed, stem sealing with o-ring, face-to-face dimension acc. to DIN 3202 M3, threaded ends acc. to ISO 7/1 (DIN 2999, part 1), with coupling unit made of galvanized steel
Bestell-Nr.Order No.
PN
Werkstoffe / Materials
AusführungDesign
beiderseits MuffenanschlussBoth sides with
female threaded endsKH 1079 T 40
Gehäuse, Einschraubteil,Schaltwelle
Body, screw part, stem
KugelBall
KupplungsstückCoupling
CuZn40Pb2 2.0402vernickelt
Nickel-plated
CuZn40Pb2 2.0402verchromt
Chrome-plated
Stahl, verzinktGalvanized steel
KugelhähneBall valves
Nr. 1079
Friedrich Krombach GmbH & Co. KG � Armaturenwerke � D-57202 Kreuztal � Postfach 1130Telefon (0 27 32) 520-00 � Telefax (0 27 32) 520 100 � http//www.krombach.com � e Mail: [email protected]
Pos.Item
Benennung Designation
1
2
3
4
5
6
7
8
9
Gehäuse
Einschraubteil
Kugel
Schaltwelle
Dichtschale
Schaltwellendichtung
O-Ring
Kupplung
O-Ring
Body
Screw part
Ball
Stem
Seat
Stem sealing
O-ring
Coupling
O-ring
Werkstoff / Material
CuZn40Pb2 vernickelt / Nickel-plated
CuZn40Pb2 vernickelt / Nickel-plated
CuZn40Pb2 vernickelt und hartverchromt / Nickel-plated and chrome-plated
CuZn40Pb2 vernickelt / Nickel-plated
PTFE
PTFE
Viton
Stahl, verzinkt / Galvanized steel
Viton
2.0402
2.0402
2.0402
2.0402
-
-
-
-
-
DN S H t D D1 L L1 dDIN ISO
5211h SW
Gewicht/Weight≈[g]
Rp ¼
Rp d
Rp ½
Rp ¾
Rp 1
Rp 1¼
Rp 1½
Rp 2
50
60
75
80
90
110
120
140
33
34
35,5
45,5
49,5
63
69,5
84,5
10
11,4
15
16,3
19,1
21,4
21,4
25,7
21
21
21
26
26
30
30
30
25
25
25
30
30
35
35
35
38
38
38
42
42
50
50
50
26
26
26
30
30
36
36
36
6
6
6
6
6
7
7
7
F03
F03
F03
F04
F04
F05
F05
F05
1,5
1,5
1,5
1,5
1,5
2
2
2
9
9
9
11
11
14
14
14
290
310
340
560
820
1390
1790
2900
DN
bis / up to 10 bar
25 bar
40 bar
Md zul./Mt allow.
Rp 1¼
15
16
17
58
Rp ½
4
4
4
10
Rp ¾
5
5
5
22
Rp 1
8
8
8
22
Rp 1½
21
23
26
58
Rp 2
25
28
32
67
Baumaße und Gewichte / Dimensions and weights
Werkstoffe / Materials
Anfahrdrehmomente [Nm] / Starting torques [Nm]
PrüfdrückeGehäuse: 1,5 x PN Wasser
6 bar LuftAbschluss: 1,0 x PN Wasser
6 bar Luft
Test pressuresBody: 1,5 x PN water
6 bar airSeat: 1,0 x PN water
6 bar air
Die Kvs-Werte bei Kugelhähnen mit vollem Durchgang entsprechen den vergleichbaren Rohrlängen.
The Kvs-values for ball valves with full bore correspond to the comparable pipe lengths.
Das Anfahrdrehmoment wird erheblich durch die Schalthäufigkeit beeinflusst.
Achtung!Bei nicht schmierenden Medien (z. B. Benzine, Gase) oder adhäsiven Medien ist eine entsprechende Erhöhung der Werte zu berücksichtigen.
The starting torque is considerably influenced by the number of actuations.
Attention!If non-lubricating media (i, e, benzine, gases) or adhesive media are used an increasing of the values has to be considered.
05/04
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1079
Mit Gewinde nach ISO 7/1, Gehäuse aus Pressmessing vernickelt, Kugel aus Messing hartverchromt, wahlweise mit L- oder T-Bohrung, Schaltwelle aus Messing vernickelt, Dichtschalen aus PTFE, Schaltwellenabdichtung durch Teflon-Dichtringe, doppelseitig dichtend,allseitig mit Muffenanschluss.
FK-Kugelhähne in Dreiwegeform, PN 16 - PN 40
FK-ball valve, three way form, PN 16 - PN 40With female thresded ends acc. to ISO 7/1, body made of brass nickel-plated, ball made of brass hard chrome-plated, alternatively with L-bore or T-bore, stem made of brass nickel-plated, PTFE seats, stem sealing by Teflon sealing rings, double sided sealed,all sides with female threaded ends.
Bestell-Nr.Order No.
PN
Werkstoffe / Materials
AusführungDesign
mit vollem Durchgangdoppelseitig dichtend
With full boredouble sided sealed
16
Gehäuse, SchaltwelleBody, stem
KugelBall
SchaltgriffOperating handle
CuZn40Pb2 2.0402vernickelt
Nickel-plated
CuZn40Pb2 2.0402verchromt
Hard chrome-plated
X20Cr13 1.4021mit gelbem PlastküberzugWith yellow plastic coating
mit reduziert. Durchgangallseitig dichtendWith reduced bore
all sides sealed
16-40
KugelbohrungBall bore
mit L-BohrungWith L-bore
mit T-BohrungWith T-bore
mit L-BohrungWith L-bore
mit T-BohrungWith T-bore
KH 1081 L
KH 1082 T
KH 1083 L
KH 1084 T
Leichtmetallgelb lackiertLight-metal
yellow lacquered
Bitte beachten Sie, dass der Eintrittsstutzen bei Bestell-Nr. KH 1081 L und KH 1082 T ohne Dichtschalen ausgerüstet ist.Aus diesem Grund sollte dieser Stutzen auch wirklich nur als Eintrittsstutzen eingesetzt werden.Bei Bestell-Nr. KH 1083 L und 1084 T handelt es sich dagegen um Ausführungen mit allseitig eingesetzter Dichtung.
Please note that the inlet connection of order numbers KH 1081 L and KH 1082 T is without seats.Therefore, this body connection should be exclusively used as inlet connection.The order numbers KH 1083 L and 1084 T, however, are models with sealings on all sides.
KugelhähneBall valves
Nr. 1080
Friedrich Krombach GmbH & Co. KG � Armaturenwerke � D-57202 Kreuztal � Postfach 1130Telefon (0 27 32) 520-00 � Telefax (0 27 32) 520 100 � http//www.krombach.com � e Mail: [email protected]
Betriebsdrücke / Working pressures
Baumaße und Gewichte / Dimensions and weights
Rp ¼
Rp d
Rp ½
Rp ¾
Rp 1
Rp 1¼
Rp 1½
Rp 2
Rp 2½
GewichtWeight
≈[g]
GewichtWeight
≈[g]DN
KH 1081 L, KH 1082 T KH 1083 L, KH 1084 T
D E C t1 t2 l L SW D E C t1 l L SW
9
10
15
20
25
32
40
50
63
95
95
95
115
115
155
155
190
220
42
42
44,5
53
56
75,5
82
96
112
10
11,5
15
16,5
19
21,5
21,5
25,5
30
11,5
13,5
17
18,5
21
24
24
28
33
23
26
33
38
46,5
54
59,5
69,5
82
46
52
66
76
93
108
119
139
164
19
22
27
32
41
50
55
70
90
160
200
290
485
850
1390
1980
3355
7500
10
10
13
17,5
22
28
35
44
110
110
110
129,5
129,5
159
159
188
47,5
47,5
50
62,5
67
82
88,5
109
10
11,4
15
16,3
19,1
21,4
21,4
25,7
26
26
33
38
46,5
54
63
73
52
52
66
76
93
108
126
146
22
22
27
32
41
50
55
70
250
250
370
650
1100
1850
3150
4700
L-Bohrung / L-bore L-Bohrung / L-bore T-Bohrung / T-bore T-Bohrung / T-bore T-Bohrung T-bore
Eintritt offenlinker Abgang offenrechter Abgang geschlossenOpen inletLeft outlet openRight outlet closed
Eintritt offenlinker Abgang geschlossenrechter Abgang offenOpen inletLeft outlet closedRight outlet open
Eintritt offenlinker Abgang offenrechter Abgang geschlossenOpen inletLeft outlet openRight outlet closed
Eintritt offenlinker Abgang offenrechter Abgang offenOpen inletLeft outlet openRight outlet open
Eintritt offenlinker Abgang geschlossenrechter Abgang offenOpen inletLeft outlet closedRight outlet open
Schaltschemen für Kugelhähne in Dreiwegeform / Operation schemes for three-way ball valves
E
C
DND
t1
t2l
L
SW
l
D
DN
t1 t2
02/04
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 1080
Einsatzbereich für Serien-Ausführung mit Teflon-Dichtgarnitur:• Wasser im Temperaturbereich von 4°C
bis 160° C• gesättigter Dampf• Druckluft• Gas• Öl, Kraftstoffe mit hohem Benzolanteil,
Heizöl• Lösungsmittel, Farben, Lacke,• in bedingtem Umfang auch schwache
Laugen und Säuren max. Einsatzbereich von -40°C bis + 200° C Vakuumdicht bis 10 Torr.-3
Application range for valves with Teflon sealing • Water in the temperature range from 4°C
up to 160°C• Saturated steam• Compressed air• Gas• Oil, fuels with a high percentage of
benzine, fuel oil S• Solvents, paints and varnishes• Even weak acids and alkaline solutions to
a limited extent max. application range from -40°C up to +200°C,Vacuum tightness up to 10 Torr-3
FK-Kugelhahn nach DIN 3357, BS 5351, ASME B16.34 metallisch dichtend
FK-ball valve acc. to DIN 3357, BS 5351, ASME B16.34 metal seated
mit Flanschanschluss PN 10 - PN 40 oder ASME Class 150 bzw. Class 300, Gehäuse in zweiteiliger Ausführung, voller Durchgang, sitzgelagerte Kugel, hochverschleißfestes metallisches Dichtsystem, ausblassichere Schaltwelle, mit antistatischer Ableitung, Totraumentlastung, Fire Safe gemäß BS 6755 Teil 2, TA-Luft geprüft, Aufbauflansch für Antriebe gemäß DIN ISO 5211, Betätigung mit Handhebel, Schneckengetriebe oder pneumatischem Antrieb, Baulängen nach DIN EN 558-1 bzw. ASME B 16.10, API 6 D und BS 2080.Dichtleisten nach DIN 2526 Form C bzw. ASME B 16.5 RF.
with flanged connection PN 10 - PN 40 or ASME Class 150 or Class 300, body in two-piece design, full bore, floating ball, high wear resisting metal seal system, anti blow-out stem, antistatic, cavity relief, fire safe acc. to BS 6755 part 2, TA-Luft tested, with mounting flange for actuator acc. to DIN ISO 5211, operation with hand lever, gear box or pneumatic actuator.Face-to-face dimension acc. to DIN EN 558-1 or ASME B 16.10, API 6 D and BS 2080.Sealing surface acc. to DIN 2526 Form C or ASME B 16,5 RF.
Bestell-Nr.Order No.
Ventilsitz nach Krombach Werksbezeichnung
Seat material acc. to Krombach codePN
GehäusewerkstoffBody material
5136
16/40
16/40
150/300 lbs
150/300 lbs
Edelstähle z.B.: / Stainless steel e.g.:
1.4571; 1.4462; Hastelloy; Nickel
C-Stähle z.B.: / Carbon steel e.g.:
C21; 1.7335; 1.7380; TSTE 355; 1.7362
Edelstähle z.B.: / Stainless steel e.g.:
316 Ti; 304L; Hastelloy; Nickel; Monel
C-Stähle z.B.: / Carbon steel e.g.:
A 105; F1; F5; F11; F22; LF2
H2: Hartchrom / ChromiumH3: Hartlegierung auf Nickelbasis /
Nickel alloyH4: Hartlegierung auf Nickelbasis mit
Wolframkarbid /Nickel alloy + carbides
H5: Hartlegierung auf Cobaltbasis /Cobalt alloy
H6: Hartlegierung auf Chromkarbidbasismit Ni und Cr / Chrom-carbides
H7: Chromoxid-Keramik / Ceramic chromoxid
KugelhähneBall valves
Nr. 5136
VerfahrenProcedures
H2: Elektrogalvanisch /Electro galvanic
H3, H4, H5:Flammspritzen mit thermischer Nachverdichtung /Plasma spray & fused
H6, H7:Hochgeschwindig-keitsflammspritzen /High speed spraying
StandardausführungStandard design
Handhebel um 90° gedreht gezeichnetHandlever shown in a 90° shifted position
Getriebe um 90° gedreht gezeichnetGear box shown in a 90° shifted position
Ausführung mit SchneckengetriebeDesign with gear box
KugelhähneBall valves
Nr. 5136
L
DN
f
h3
h2
L
L0
h1
bØ
D
n x
ød
ø
k
øg
23
3 1 4 1513 14
6
7
10
12
11
2
5
8
21
18
16
2217 20 9
19
15 20 25 32 40 50 65 65 80 80
100 100 150 150 200 200 200 200
10-40 10-40 10-40 10-40 10-40 10-40 10/16 25/40 10/16 25/40 10/16 25/40 10/16 25/40
10 16 25 40
130 150 160 180 200 230 290 290 310 310 350 350 450 450 550 550 550 550
51 60 60 75 75 90
120 120 105 105 125 125 187 187 220 220 185 185
259 259 259 332 332 332 405 405 405 405
- - - - - - - -
35 49 49 65 65 75
107 107 107 107 130 130 187 187 244 244 244 244
62 77 77
105 105 115 164 164 164 164 196 196 286 286 349 349 349 349
108 123 123 155 155 165 227 227 227 227
- - - - - - - -
17 24 24 38 38 48 76 76 76 76 95 95
150 150 203 203 203 203
95 105 115 140 150 165 185 185 200 200 220 220 285 300 340 340 360 375
65 75 85
100 110 125 145 145 160 160 180 190 240 250 295 295 310 320
4x14 4x14 4x14 4x18 4x18 4x18 4x18 8x18 8x18 8x18 8x18 8x22 8x22 8x26 8x22
12x22 12x26 12x30
45 58 68 78 88
102 122 122 138 138 158 162 212 218 268 268 278 285
2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3
16 18 18 18 18 20 18 22 20 24 20 24 22 28 24 24 30 34
5,57,58
10,513,519,5282835384648
120126174174198204
35 35 49 65 75
107 130 187 187
62 62 77
105 115 164 196 286 286
108 108 123 155 165 207
- - -
17 17 24 38 48 76 95
150 203
88,9 98,6 108 127
152,4 190,5 228,6 279,4 342,9
60,5 69,9 79,2 98,6
120,7 152,4 190,5 241,3 298,5
4x15,7 4x15,7 4x15,7 4x15,7 4x19,0 4x19,0 8x19,0 8x22,4 8x22,4
35,1 42,9 50,8 73,1 91,9 127
157,2 215,9 269,7
1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6
11,2 12,7 14,2 17,5 19,1 23,9 23,9 25,4 28,4
5,37,27,712172946
102172
1/2" 3/4" 1"
1 1/2" 2" 3" 4" 6" 8"
150 150 150 150 150 150 150 150 150
108 117 127 165 178 203 229 394 457
51 53 60 68 77 89
107 180 220
259 259 259 332 332 405
- - -
1/2" 3/4" 1"
1 1/2" 2" 3" 4" 6" 8"
300 300 300 300 300 300 300 300 300
140 152 165 190 216 283 305 403 502
56 61 60 72 90
105 125 168 220
259 259 259 332 332 405
- - -
35 49 49 65 75
107 130 187 187
62 77 77
105 115 164 196 286 286
108 123 123 155 165 207
- - -
17 24 24 38 48 76 95
150 203
95,2 117,3 123,9 155,4 165,1 209,5 254
317,5 381
66,5 82,5 88,9
114,3 127
168,1 200,1 269,7 330,2
4x15,7 4x19 4x19
4x22,3 8x19
8x22,3 8x22,3
12x22.3 12x25,4
35,1 42,9 50,8 73.1 91,9 127 127
215,9 269,7
1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6 1,6
14,2 15,7 17,5 20,6 22,3 28,4 31,7 36,5 41,1
6,58,49
14,5224065
132235
DN PNBaumaße / Dimensions [mm] Flanschanschlussmaße / Flange dimensions [mm] Gewicht
Weight[kg]
DN ClassGewichtWeight
[kg]
DN ClassGewichtWeight
[kg]
Baumaße / Dimensions [mm] Flanschanschlussmaße / Flange dimensions [mm]
Baumaße / Dimensions [mm] Flanschanschlussmaße / Flange dimensions [mm]
L2 L0 L h1 h2 h3 d1 D k nxd g f b
L2 L0 L h1 h2 h3 d1 D k nxd g f b
L2 L0 L h1 h2 h3 d1 D k nxd g f b
DIN voller Durchgang / DIN full bore
ASME voller Durchgang / ASME full bore
ASME voller Durchgang / ASME full bore
Gehäuse Flanschteil Schaltkugel Kugeldichtring Federelement Druckring Tellerfeder Stopfbuchsbrille Schaltwelle Lagerring Stopfbuchsring Stützring Gehäusedichtring Stiftschraube Sk.-Mutter Sk.-Schraube/Stiftschraube Sk.-Mutter Druckring Handhebel Blech Zylinderschraube Scheibe Sk.-Schraube
Body Cover Ball Seat ring Spring element Pressure ring Belleville spring washer Gland Stem Bearing Packing ring Supporting ring Body sealing ring Stud bolt Hex.-nut Hex.-head screw/Stud bolt Hex.-nut Pressure ring Hand lever Steel plate Fillister head screwDisc Hex.-head screw
Pos.Item
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19 20 21 22 23
C21 / A 105 1.4571 / 316 Ti Hastelloy Nickel
Werkstoffe / Materials
X6CrNiMoTi17-12-2 1.4571 beschichtet / 316 Ti CoatedX6CrNiMoTi17-12-2 1.4571 beschichtet / 316 Ti CoatedGrafit / GraphiteX6CrNiMoTi17-12-2 1.4571 / 316 TiInconel X750X6CrNiMoTi17-12-2 1.4571 / 316 TiX6CrNiMoTi17-12-2 1.4571 / 316 TiHartkohle / Hard coalGrafit / GraphiteGrafit / GraphiteGrafit / GraphiteA4-70 / A 193 Gr. B8A4-70 / A 194 Gr. 8A4-70 / A 193 Gr. B8A4-70 / A 194 Gr. 8X6CrNiMoTi17-12-2 1.4571C15 1.0401 / Carbon steelSt verzinkt / Zinc coated8.8 verzinkt / Zinc coatedSt verzinkt / Zinc coatedA4-70 / A 193 Gr. B8
Benennung Designation
Werkstoffe / Materials
KugelhähneBall valves
Nr. 5136
Ausführung mit geschlossener Schaltwellenverlängerungfür TieftemperatureinsatzDesign with closed stem extensionfor cryogenic applications
Standardlänge 100 mm für HochtemperatureinsatzStandard length 100 mm for high temperature applications
Aufbauflansch für Antriebe nach DIN ISO 5211Mounting flange for actuators acc. to DIN ISO 5211
15
20
25
32
40
50
65
80
100
150
200
½"¾" 150 lbs
¾" 300 lbs
1"
1½"
1½"
2"
2½"
3"
4"
6"
8"
DNDIN ISO
5211
F04
F05
F05
F07
F07
F07
F10
F10
F12
F16
F16
17
20
20
25
25
25
35
35
40
55
70
30
35
35
55
55
55
70
70
85
130
130
42
50
50
70
70
70
102
102
125
165
165
M5
M6
M6
M8
M8
M8
M10
M10
M12
M20
M20
9
9
9
15
15
15
20
20
30
45
55
27
28
28
40
40
40
57
57
66
99
105
3
3
3
3
3
3
3
3
3
5
5
52
62
62
60
60
60
80
80
-
-
-
14
18
18
20
20
20
22
22
-
-
-
12
14
14
16
16
16
22
22
27
36
46
d2 d4 d5 d6 h4 h5 Lk bk SWh6
DN
15
20
25
32
40
50
80
100
150
200
h8
200
250
300
350
KugelhähneBall valves
Nr. 5136
h8
Ermittlung der Drehmomente
Das erforderliche Drehmoment wird von folgenden Größen bestimmt:• Nennweite (DN)• Druckdifferenz (∆p) zum Zeitpunkt der Ventilöffnung• Art und Eigenschaften des MediumsZur Ermittlung der Drehmomente müssen die aus dem nebenstehenden Diagramm ermittelten Werte mit dem Faktor FF multipliziert werden.
Medium : FF Es ist zu beachten, dass dasÖl : 1,0 max. Drehmoment des AntriebesWasser : 1,3 das zulässige Drehmoment derGas : 2,6 Schaltwelle nicht überschreitet.
Determination of torques
The determination of the necessary torque depends on the following variables.• Nominal size• Pressure difference (∆p) at the time when the valve opens• Nature and characteristics of the fluidTo determine the respective torque the values resulting from the diagram have to be multiplied by the factor of influence FF
Medium : FF It is important to ensure that theOil : 1,0 maximum torque of the actuatorWater : 1,3 does not exceed the allowableGas : 2,6 torque of the stem.
15
20
25
32
40
50
65
80
100
150
200
½"
¾"
1"
1½"
1½"
2"
2½"
3"
4"
6"
8"
DN 20°C 100°C 200°C 300°C 400°C
70
90
192
563
59
78
158
462
54
73
139
406
49
66
123
367
45
62
109
318
870
2184
4524
716
1705
3718
631
1581
3274
567
1426
2956
494
1240
2567
Zulässige p/T-Werte für drucktragende Teile [bar]Allowable p/T-values for pressure retaining parts [bar]
zulässiges Drehmoment der Schaltwelle [Nm] (Werkstoff 1.4571*)Allowable torque of the stem [Nm] (material 1.4571 *)
Material: A: 1.0619 B: 1.4581
* andere Werkstoffe möglich / Other materials possible
Material: C: ASTM A216 WCBD: ASTM A351 CF8M
KugelhähneBall valves
Nr. 5136
Friedrich Krombach GmbH & Co. KG � Armaturenwerke � D-57202 Kreuztal � Postfach 1130Telefon (0 27 32) 520-00 � Telefax (0 27 32) 520 100 � http//www.krombach.com � e Mail: [email protected]
Lieferbare Sonderausführungen: Special designs:
• With heating jacket• mit Heizmantel• With stem extension• mit Schaltwellenverlängerung• With electric, pneumatic or hydraulic actuator• mit elektrischem, pneumatischem oder hydraulischem Antrieb• Other sealing surfaces are possible• andere Flanschdichtleisten möglich• Further nominal sizes; nominal pressures and materials on request• weitere Nennweiten, Nenndrücke und Werkstoffe auf Anfrage
02/04
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge der Weiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to use materials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
KugelhähneBall valves
Nr. 5136
Kugelhähne mitPneumatik-Schwenkantrieb "Alphair"• FK-Kugelhähne gemäß Prospekt 1025/1035
mit Flanschanschluss PN 16 bis PN 40, Gehäuse in2teiliger Ausführung, voller Durchgang, firesafe-Design,mit antistatischer Ableitung, Schaltwelle ausblassicher
• MF-Kugelhähne gemäß Prospekt 1000-1030Gehäuse in 3-teiliger Ausführung, Sandwich Bauweise,ausschwenkbares Gehäusemittelteil,Anschluss: mit Schweißenden nach DIN 3239
mit Gewindeenden nach DIN 2999mit Flanschanschluss nach DIN 2501
Ball valves withpneumatic actuator "Alphair"• FK-Ball valves acc. to leaflet 1025/1035
with flanged connection PN 16 up to PN 40, Body in2-piece design, full bore, fire-safe design,with anti-static conductance, stem blow-off proof
• MF-Ball valves acc. to leaflet 1000-1030Body in 3-piece design, sandwich construction,central body part,Connection: with welding ends acc. to DIN 3239
with threaded ends acc. to DIN 2999with flanged connection acc. to DIN 2501
Kugelhähne mit Pneumatik-Antrieb
Nr. 1303
Ball valves with pneumatic actuator
KurzbaulängeDIN-EN 558-1, Reihe 27LangbaulängeDIN-EN 558-1, Reihe 28KurzbaulängeDIN-EN 558-1, Reihe 27LangbaulängeDIN-EN 558-1, Reihe 28reduzierter Durchgang,Schweißendenvoller Durchgang,Schweißendenreduzierter Durchgang,Gewindeanschlussvoller Durchgang,Gewindeanschlussreduzierter Durchgang,Flanschanschlussvoller Durchgang,Flanschanschluss
Short dimensionDIN-EN 558-1, line 27Long dimensionDIN-EN 558-1, line 28Short dimensionDIN-EN 558-1, line 27Long dimensionDIN-EN 558-1, line 28Reduced bore,welding endsFull bore,welding endsReduced bore,threaded endsFull bore,threaded endsReduced bore,flanged connectionFull bore,flanged connection
KH 1026 B
KH 1027B
KH 1036B
KH 1037B
RA 55 TCBS
RA 66 TCBS
RA 55 TCBG
RA 66 TCBG
RA 55 TCBF
RA 66 TCBF
Bestell-Nr.:
Fig.-no.:Ausführung
Werkstoff
Material
Werkstoff-Nr.:
Material-Nr.:
GX5CrNiMo19-11-2 1.4408
1.4408
GP240GH (GS-C 25)
GP240GH (GS-C 25)
1.0619
1.0619
C22G2 (C22.8)
1.0460GP240GH (GS-C 25)
1.0619
X2CrNiMo17-12-2
GX5CrNiMo19-11-2
1.4404GX5CrNiMo19-11-2 1.4408
C22G2 (C22.8) 1.0460GP240GH (GS-C 25) 1.0619
X2CrNiMo17-12-2 1.4404GX5CrNiMo19-11-2 1.4408
C22G2 (C22.8) 1.0460GP240GH (GS-C 25) 1.0619
X2CrNiMo17-12-2 1.4404GX5CrNiMo19-11-2 1.4408
Design
Ausführung KH 1025 / 1035Design KH 1025 / 1035
DN 15 - 100 PN 16 - 40DN 150, 200 PN 10 - 16
DN 150 - 300, PN 25 - 40
Ausführung KH 1000 / 1030Design KH 1000 / 1030
DN 10 - 65 DN 8 - 50reduzierter Durchgang voller DurchgangReduced bore Full bore
DN 80 - 200 DN 65 - 200reduzierter Durchgang voller DurchgangReduced bore Full bore
Kugelhähne mit Pneumatik-Antrieb
Nr. 1303
Ball valves with pneumatic actuator
Baumaße / DimensionKH 1025/1035 6 bar Steuerdruck / 6 bar control pressure
DN PN L1 L2 H A Type H A Type
16 195 138 AP050 228 210 AP075SR15 115 130
40 211 155,5 AP063 238 228 AP085SR
1620 120 150 216 155,5 AP063 243 228 AP085SR
40
16 221 155,5 AP063 248 228 AP085SR25 125 160
40 238 210 AP075 290 310 AP115SR
16 242 155,5 AP063 311 310 AP115SR32 130 180
40 259 210 AP075 311 310 AP115SR
1640 140 200 262 210 AP075 314 310 AP115SR
40
16 270 210 AP075 322 310 AP125SR50 150 230
40 280 228 AP085 335 362 AP125SR
16 289 228 AP085 344 362 AP125SR65 170 290
40 289 280,5 AP100 405 462 AP160SR
16 337 228 AP085 392 362 AP125SR80 180 310
40 352 280,5 AP100 453 462 AP160SR
16 372 280,5 AP100 473 462 AP160SR100 190 350
40 412 362 AP125 517 575 AP200SR
16 432 362 AP125 537 462 AP160SR125 325 400
25-40 493 462 AP160 - - -
16 548 462 AP160 - - -150 350 450
25-40 592 575 AP200 - - -
Antrieb doppeltwirkendActuator double acting
Antrieb einfachwirkendActuator single acting
KH 1000-1030 (voller Durchgang)6 bar Steuerdruck /KH 1000-1030 (Full bore) 6 bar control pressure
Flanges Welding ends
Flansche Schweißenden
DN
integral L L1 H A Type H A Type
8 130 65 167 138 AP050 183 155,5 AP063SR
10 130 65 167 138 AP050 183 155,5 AP063SR
15 130 72,5 169 138 AP050 185 155,5 AP063SR
20 150 85,4 245 138 AP050 191 210 AP075SR
25 160 99,3 199 155,5 AP063 206 210 AP075SR
32 180 110,4 205 155,5 AP063 232 228 AP085SR
40 200 126,3 226 210 AP075 278 310 AP115SR
50 230 142,6 250 210 AP075 292 310 AP115SR
65 290 169,5 304 280,5 AP100 344 362 AP125SR
80 310 214 341 280,5 AP100 440 462 AP160SR
100 350 277 393 362 AP125 454 462 AP160SR
150 480 409 516 462 AP125 556 575 AP160SR
200 600 460 564 462 AP160 - - -
Antrieb doppeltwirkend
Actuator double acting
Antrieb einfachwirkend
Actuator single acting
Antrieb doppeltwirkend
Actuator double acting
Antrieb einfachwirkend
Actuator single acting
KH 1000-1030 (reduzierter Durchgang)6 bar Steuerdruck /KH 1000-1030 (Reduced bore) 6 bar control pressure
Flanges Welding ends
Flansche Schweißenden
DN
venturi L L1 H A Type H A Type
10 130 65 167 138 AP050 183 155,5 AP063SR
15 130 65 167 138 AP050 183 155,5 AP063SR
20 150 72,5 169 138 AP050 185 155,5 AP063SR
25 160 85,4 185 138 AP050 208 210 AP075SR
32 180 99,3 199 155,5 AP063 206 210 AP075SR
40 200 110,4 205 155,5 AP063 232 228 AP085SR
50 230 126,3 224 210 AP075 278 310 AP115SR
65 290 142,6 250 210 AP075 302 310 AP115SR
80 310 169,5 304 280,5 AP100 344 362 AP125SR
100 350 214 339 280,5 AP100 440 462 AP160SR
125 400 277 393 362 AP125 454 462 AP160SR
150 480 307 393 362 AP125 454 462 AP160SR
200 600 409 512 462 AP160 556 575 AP200SR
Kugelhähne mit Pneumatik-Antrieb
Nr. 1303
Ball valves with pneumatic actuator
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130� � �
Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]� � �
Ausführung mit MagnetventilDesign with solenoid valve
Ausführung mit EndschalterDesign with limit switch
SchließzeitenClosing times
Antrieb doppeltwirkend Antrieb einfachwirkend
Typ Schließzeit Luftverbrauch Typ Schließzeit Luftverbrauch
sec dm³ sec dm³
AP032 0,50 0,07 AP032SR 0,60 0,23
AP050 0,60 0,23 AP050SR 0,60 0,23
AP063 0,70 0,45 AP063SR 0,90 0,45
AP075 0,70 0,61 AP075SR 0,90 0,61
AP085 0,90 0,98 AP085SR 1,30 0,98
AP100 0,90 1,80 AP100SR 1,30 1,80
AP115 1,10 2,80 AP115SR 1,60 2,80
AP125 1,10 3,70 AP125SR 2,10 3,70
AP160 1,60 8,00 AP160SR 2,60 8,00
AP200 4,60 14,20 AP200SR 6,10 14,20
Actuator double acting Actuator single acting
Type Time to close Air consumption Type Time to close Air consumption
Achtung! Je nach Betriebsverhältnissen können sich die Schaltzeiten ändern.Attention! Depending on the working conditions the closing times may be changed.
Antrieb TypA B C
AP032 - AP 100 120 80 100
AP115 - AP 200 120 80 110
Actuator type
06/04
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge derWeiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to usematerials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
Kugelhähne mit Pneumatik-Antrieb
Nr. 1303
Ball valves with pneumatic actuator
Kugelhähne mitPneumatik-Schwenkantrieb "EL-O-matic"• FK-Kugelhähne gemäß Prospekt 1025/1035
mit Flanschanschluss PN 16 bis PN 40, Gehäuse in2teiliger Ausführung, voller Durchgang, firesafe-Design,mit antistatischer Ableitung, Schaltwelle ausblassicher
• MF-Kugelhähne gemäß Prospekt 1000-1030Gehäuse in 3-teiliger Ausführung, Sandwich Bauweise,ausschwenkbares Gehäusemittelteil,Anschluss: mit Schweißenden nach DIN 3239
mit Gewindeenden nach DIN 2999mit Flanschanschluss nach DIN 2501
Ball valves withpneumatic actuator "EL-O-matic"• FK-Ball valves acc. to leaflet 1025/1035
with flanged connection PN 16 up to PN 40, Body in2-piece design, full bore, fire-safe design,with anti-static conductance, stem blow-off proof
• MF-Ball valves acc. to leaflet 1000-1030Body in 3-piece design, sandwich construction,central body part,Connection: with welding ends acc. to DIN 3239
with threaded ends acc. to DIN 2999with flanged connection acc. to DIN 2501
KurzbaulängeDIN-EN 558-1, Reihe 27LangbaulängeDIN-EN 558-1, Reihe 28KurzbaulängeDIN-EN 558-1, Reihe 27LangbaulängeDIN-EN 558-1, Reihe 28reduzierter Durchgang,Schweißendenvoller Durchgang,Schweißendenreduzierter Durchgang,Gewindeanschlussvoller Durchgang,Gewindeanschlussreduzierter Durchgang,Flanschanschlussvoller Durchgang,Flanschanschluss
Short dimensionDIN-EN 558-1, line 27Long dimensionDIN-EN 558-1, line 28Short dimensionDIN-EN 558-1, line 27Long dimensionDIN-EN 558-1, line 28Reduced bore,welding endsFull bore,welding endsReduced bore,threaded endsFull bore,threaded endsReduced bore,flanged connectionFull bore,flanged connection
KH 1026 B
KH 1027B
KH 1036B
KH 1037B
RA 55 TCBS
RA 66 TCBS
RA 55 TCBG
RA 66 TCBG
RA 55 TCBF
RA 66 TCBF
Bestell-Nr.:
Fig.-no.:Ausführung
Werkstoff
Material
Werkstoff-Nr.:
Material-Nr.:
GX5CrNiMo19-11-2 1.4408
1.4408
GP240GH (GS-C 25)
GP240GH (GS-C 25)
1.0619
1.0619
C22G2 (C22.8)
1.0460GP240GH (GS-C 25)
1.0619
X2CrNiMo17-12-2
GX5CrNiMo19-11-2
1.4404GX5CrNiMo19-11-2 1.4408
C22G2 (C22.8) 1.0460GP240GH (GS-C 25) 1.0619
X2CrNiMo17-12-2 1.4404GX5CrNiMo19-11-2 1.4408
C22G2 (C22.8) 1.0460GP240GH (GS-C 25) 1.0619
X2CrNiMo17-12-2 1.4404GX5CrNiMo19-11-2 1.4408
Design
Kugelhähne mit Pneumatik-Antrieb
Nr. 1304
Ball valves with pneumatic actuator
Ausführung KH 1025 / 1035Design KH 1025 / 1035
DN 15 - 100 PN 16 - 40DN 150, 200 PN 10 - 16
DN 150 - 200, PN 25 - 40
Ausführung KH 1000 / 1030Design KH 1000 / 1030
DN 10 - 65 DN 8 - 50reduzierter Durchgang voller DurchgangReduced bore Full bore
DN 80 - 200 DN 65 - 200reduzierter Durchgang voller DurchgangReduced bore Full bore
Kugelhähne mit Pneumatik-Antrieb
Nr. 1304
Ball valves with pneumatic actuator
Baumaße / DimensionKH 1025/1035
KH 1000-1030 (reduzierter Durchgang)KH 1000-1030 (reduced bore) Steuerdruck: 5-6 bar / Control pressure: 5-6 bar
KH 1000-1030 (voller Durchgang)KH 1000-1030 (Full bore) Steuerdruck: 5-6 bar / Control pressure: 5-6 bar
Steuerdruck: 5-6 bar / Control pressure: 5-6 bar
15
15
20
20
25
25
32
32
40
40
50
50
65
65
80
80
100
100
125
125
150
150
200
200
16
40
16
40
16
40
16
40
16
40
16
40
16
40
16
40
16
40
16
25/40
16
25/40
16
25/40
115
115
120
120
125
125
130
130
140
140
150
150
170
170
180
180
190
190
325
325
350
350
400
400
130
130
150
150
160
160
180
180
200
200
230
230
290
290
310
310
350
350
400
400
450
450
550
550
H
188
208
213
213
218
243
239
264
267
267
275
288
298
343
345
370
390
428
448
497
681
719
835
835
A
103
159
159
159
159
199
159
199
199
199
199
221
221
283
221
283
283
305
305
390
440
641
570
570
Type
ED 12
ED 25
ED 25
ED 25
ED 25
ED 65
ED 25
ED 65
ED 65
ED 65
ED 65
ED 100
ED 100
ED 200
ED 100
ED 200
ED 200
ED 350
ED 350
ED 600
ED 950
ED 1600
PD 2500
PD 2500
H
221
233
238
238
243
255
277
277
280
280
288
333
343
381
370
457
428
516
497
614
719
788
860
860
A
204
249
249
249
249
267
267
267
267
267
267
360
360
387
360
480
387
532
480
641
641
570
834
834
Type
ES 40
ES 65
ES 65
ES 65
ES 65
ES 100
ES 100
ES 100
ES 100
ES 100
ES 100
ES 200
ES 200
ES 350
ES 200
ES 600
ES 350
ES 950
ES 600
ES 1600
ES 1600
PE 2500
PE 4000
PE 4000
Antrieb doppeltwirkend
Actuator double acting
Antrieb einfachwirkend
Actuator single actingL2L1PNDN
Antrieb doppeltwirkend
Actuator double acting
Antrieb einfachwirkend
Actuator single actingventuri
Flansche
FlangesSchweißenden
Welding ends
Antrieb doppeltwirkend
Actuator double acting
Antrieb einfachwirkend
Actuator single actingintegral
Flansche
FlangesSchweißenden
Welding ends
DN
10
15
20
25
32
40
50
65
80
100
125
150
200
L
130
130
150
160
180
200
230
290
310
350
400
480
600
L1
65
65
72,5
85,4
99,3
110,4
126,3
142,6
169,5
214
277
307
409
H
160
160
172
168
196
202
231
255
342
357
409
409
516
A
103
103
103
103
159
159
199
199
283
283
305
305
390
Type
ED 12
ED 12
ED 12
ED 12
ED 25
ED 25
ED 65
ED 65
ED 200
ED 200
ED 350
ED 350
ED 600
H
190
190
192
211
209
227
244
268
342
395
458
458
565
A
172
172
172
204
204
249
267
267
360
387
480
480
532
Type
ES 25
ES 25
ES 25
ES 40
ES 40
ES 65
ES 100
ES 100
ES 200
ES 350
ES 600
ES 600
ES 950
DN
8
10
15
20
25
32
40
50
65
80
100
150
200
L
130
130
130
150
160
180
200
230
290
310
350
480
600
L1
65
65
72,5
85,4
99,3
110,4
126,3
142,6
169,5
214
277
409
460
H
160
160
172
168
196
202
231
255
342
357
409
516
568
A
103
103
103
103
159
159
199
199
283
283
305
390
390
Type
ED 12
ED 12
ED 12
ED 12
ED 25
ED 25
ED 65
ED 65
ED 200
ED 200
ED 350
ED 600
ED 600
H
190
190
192
211
209
227
244
268
342
395
458
565
645
A
172
172
172
204
204
249
267
267
360
387
480
532
641
Type
ES 25
ES 25
ES 25
ES 40
ES 40
ES 65
ES 100
ES 100
ES 200
ES 350
ES 600
ES 950
ES 1600
Kugelhähne mit Pneumatik-Antrieb
Nr. 1304
Ball valves with pneumatic actuator
Friedrich Krombach GmbH & Co. KG Armaturenwerke D-57202 Kreuztal Postfach 1130� � �
Telefon (0 27 32) 520-00 Telefax (0 27 32) 520 100 http//www.krombach.com e Mail: [email protected]� � �
Ausführung mit MagnetventilDesign with solenoid valve
Ausführung mit EndschalterDesign with limit switch
SchließzeitenClosing times
Schließzeit
Time to close
Schließzeit
Time to close
Luftverbrauch
Air consumption
Luftverbrauch
Air consumption
Antrieb doppeltwirkend
Actuator double acting
Antrieb einfachwirkend
Actuator single acting
ED 12
ED 25
ED 40
ED 65
ED 100
ED 200
ED 350
ED 600
ED 950
ED 1600
PD 2500
PD 4000
ES 12
ES 25
ES 40
ES 65
ES 100
ES 200
ES 350
ES 600
ES 950
ES 1600
PE 2500
PE 4000
sec.
0,4
0,5
0,7
1,1
1,2
2,3
3,6
4,5
5,4
6,9
7
12
sec.
0,4
0,5
0,7
1,1
1,2
2,3
3,6
4,5
5,4
6,9
7
12
dm
0,05
0,1
0,16
0,33
0,035
0,8
1,8
2,9
4,7
7,3
8
13,5
3dm
0,05
0,1
0,16
0,33
0,035
0,8
1,8
2,9
4,7
7,3
8
13,5
3
Type Type
Achtung !Je nach Betriebsverhältnissen können sich die Schaltzeiten ändern.Attention !Depending on the working conditions the closing times may be changed.
06/04
Die beschriebenen Armaturen entsprechen in Ihrer Konstruktion, ihren Abmessungen, Gewichten und Werkstoffen dem derzeitigen Stand der Technik. Änderungen im Zuge derWeiterentwicklung, sowie die Verwendung gleich- oder höherwertiger Werkstoffe bleiben vorbehalten. Für eventuelle Schreib- oder Übersetzungsfehler übernehmen wir keine Haftung.The construction, the measurements and the weights of the described valves represent the current technical standards. We reserve the right to change the technical details and to usematerials of equivalent and higher quality. We cannot be held responsible for any printing or translation errors that might be found in this catalogue.
Kugelhähne mit Pneumatik-Antrieb
Nr. 1304
Ball valves with pneumatic actuator