Tools Required
Phillips Screwdriver
Disassembly Instructions
REV-00
Keyboard Tray
Some components may not be recyclable in your area.
Tools Required
Phillips Screwdriver
For Clip Mouse Platform (figure 1)
Step 1Remove 3 screws from keyboard tray using a Phillips Screw Driver.
Step 2Remove screw under mouse platform sticker.
Step 3Unclip platform edge strip.
For Swivel Mouse Platform (figure 2)
Step 1Remove screw from located at bottom of mouse platform using a Phillips Screw Driver.
Step 2Unclip platform edge strip.
1. Mouse Platform Removal
1
1
2
2
3
(figure 1)
(figure 2)
Steel
Phenolic
Phenolic
Nylon
Steel
>PA<
Nylon>PA<
Disassembly Instructions
REV-00
Keyboard Tray
Some components may not be recyclable in your area.
Tools Required
Phillips Screwdriver
Step 1Remove screws from keyboard tray using a Phillips Screw Driver.
Step 2Discard parts for proper recycling.
2. Keyboard Tray Removal Phenolic
Gel or Foam
Disassembly Instructions
REV-00
Keyboard Tray
Some components may not be recyclable in your area.
Tools Required
Phillips Screwdriver
Step 1 (figure 1)Remove front screws from bracket using a Phillips Screw Driver.
Step 2 (figure 1)Once bracket is removed, slide tray arm forward to remove.
Step 3 (figure 2) Remove mounting screws using a Phillips Screw Diver.
3. Mechanism Removal
1
2
Steel
Steel
(figure 1)
(figure 2)
Disassembly Instructions
REV-00
Keyboard Tray
Some components may not be recyclable in your area.