Lubrication Management
Hose & Cable Management
Fire Suppression
Fuel & Fluid Management
Material Dispensing
A structured approach to Engineered Systems
JSG INDUSTRIAL SYSTEMS
Since its inception in 1968, JSG Industrial Systems has been a proud
supplier of quality industrial products, all of which are designed
to reduce maintenance costs and to improve the management of
assets. Our focus is to provide the best possible technical support,
field testing, technical analysis, and ongoing product development.
The reliability of our products is testament to the structured approach
we take to Engineered Industrial Systems.
A STRUCTURED APPROACH
Our portfolio is grouped into 5 key product platforms. This approach
enables us to group together complementary products & solutions,
required for various industrial sectors. Each of our platforms are
supported by a dedicated team of Product Specialists within our
Engineering Systems Technical Support division. These specialists are
available for onsite work, technical training sessions, and of course
after-sales support to our distribution network and end-user markets.
DISTRIBUTOR NETWORK
In each of the geographic areas we support, we have a network
of carefully-selected distributors. These qualified professionals
provide local area support to all of our valued end-user customers.
Each distributor has access to our online systems which gives them
24/7 visibility of service sheets & technical libraries that may be
required in the lifetime of your product. Once systems are installed
and commissioned, our distributors assist with ongoing training,
servicing, upgrades and maintenance.
CONTENTS
SPECTRIX FLUSH FACE
Part Numbers 5
Comparing to Competitors 5
Features & Dimensions 6
Evacuation Tool 7
QUICK CONNECTORS
Standard Series - Engine & Coolant 8
Standard Series - Hydraulic & Transmission 9
R Series - Engine & Coolant 10
R Series - Hydraulic & Transmission 11
¾“ Series Connectors 12
¾“ Series Connectors - High Pressure Stainless Steel
13
¾“ Series Connectors - JIC Bulkhead/Evacuation Tool
14
1“ High Flow Series Connectors 15
STANDARD DIESEL NOZZLE
FN600 Nozzle 16
FNBL Nozzle 17
DIESEL FUEL RECEIVERS
Standard Fuel Receivers 18
Removable Sleeve Diesel Fuel Receivers 18
Anti-theft, Removable Sleeve Diesel Fuel Receivers 19
HIGH FLOW DIESEL NOZZLE & RECEIVER
FX1500 Diesel Fuel Nozzle 20
FRX Diesel Fuel Receiver (2“) 20
SWIVELS
Standard Swivels 21
SPECIAL NOTE: Nozzles with Swivels 21
OTHER NOZZLE & RECEIVERS
Bulk Transfer Nozzle 22
Gravity Fill Receivers 22
3“ FUEL NOZZLE & RECEIVER 23
PRESSURED SYSTEM FUEL VENTS
Standard Fuel Vents 24
High Flow Vents 25
Pressurised System 25
NON-PRESSURE SYSTEMS
Internal System Key Components 26
External System Key Components 27
Choosing the Right Kit for You 28
Example of NPS Systems 28
NON-PRESSURE SYSTEM - ACCESSORIES
Air Filter & Bracket Assembly 29
Signal Hoses 29
Fuel Filter Hoses 29
EXAMPLES OF NON-PRESSURE SYSTEMS 30
HIGH FLOW SYSTEMS (1500 L/MIN) 32
ACCESSORIES
Breakaway Valves 33
Bell Housings 33
Double In-Line Swivel 33
CONTENTS
4 JSG Industrial Systems | Flomax Catalogue
SPECTRIX FLUSH FACE SERIES
REVOLUTIONARY DESIGNED PRODUCT
The all new Spectrix Flush Face series Quick Connectors are designed to eliminate cross-contamination. All units are thoroughly tested beyond operational expectations and ensure a leak free fluid transfer.
MULTICOLOURED; the unique design allows a variety of colours to ensure each one cannot interchange with the other to eliminate cross contamination.
FLAT FACE; each receiver and nozzle has a flat face preventing the ingress of particles and foreign materials, which can sometimes accelerate wear on the receivers and nozzles as well as contribute to contamination.
QUALITY MATERIALS; combined with hardened steel and aircraft grade aluminium and thoroughly tested beyond normal operating parameters to ensure smooth operation in various conditions.
NEW
5quality industry solutions | www.jsgindustrial.com
SPECTRIX FLUSH FACE SERIES
There are 12 different colour codes for nozzles and receivers with black being the evacuation tool which fits over all the receivers and evacuates waste fluid from any of the colour codes. This will ensure servicing of large scale vehicles is done quickly, efficiently and safe from contamination.
Flow is consistent across all colour codes
FloMAX uses the I.D. sealing surfaces to lessen the effect of scratches and contamination on the receiver. The keying mechanism with hardened stainless steel balls keeps all of the parts the same size only needing to vary one part. Making it possible to make up to 12 or more colour variations with the same consistent flow range, unlike competitors.
MAX. FLOW = 242 LPM (64 GPM)
COMPETITORS
FLOMAX
MAX. PRESSURE = 70 PSI (4.8 BAR)
Comparing to Competitors
Max. Operating Pressure 103.4 bar (1500 psi) – when connected
Burst Pressure 172.50 bar (2500 psi) – when connected
PART NO. DESCRIPTION
53-FLN #1 Nozzle – Red
53-FLN #2 Nozzle – Gold
53-FLN #3 Nozzle – Teal
53-FLN #4 Nozzle – Violet
53-FLN #5 Nozzle – Navy
53-FLN #6 Nozzle – Brown
53-FLN #7 Nozzle – Blue/Grey
53-FLN #8 Nozzle – Clear
53-FLN #9 Nozzle – Green
53-FLN #10 Nozzle – Grey
53-FLN #11 Nozzle – Bronze
53-FLN #12 Nozzle – Orange
PART NO. DESCRIPTION
53-FLR-C #1 Receiver – Red
53-FLR-C #2 Receiver – Gold
53-FLR-C #3 Receiver – Teal
53-FLR-C #4 Receiver – Violet
53-FLR-C #5 Receiver – Navy
53-FLR-C #6 Receiver – Brown
53-FLR-C #7 Receiver – Blue/Grey
53-FLR-C #8 Receiver – Clear
53-FLR-C #9 Receiver – Green
53-FLR-C #10 Receiver – Grey
53-FLR-C #11 Receiver – Bronze
53-FLR-C #12 Receiver – Orange
Note: Nozzles can also be ordered to have JIC threads by adding an “J“ ie; 53-FLNJ #1
Part Numbers The “#“ is part of the product code.
6 JSG Industrial Systems | Flomax Catalogue
uniquely engineered
Body and Design – FloMAX have hardened/heat treated stainless steel surfaces eliminating warping. This also ensures a leak free operation which has been tested repeatedly under pressure while being connected and disconnected. FloMAX have designed the receivers to have a specially machined OD sealing surface to mate only with its corresponding nozzle. This allows them to manufacture up to 15 possible combinations.
Spring and Poppet Design – There are 2 great advantages related to the way the spring is designed. The first is that the spring is concealed within the poppet and not around the internal body of the receiver and this eliminates any obstruction to the flow path. The second is that it provides a smooth actuation preventing the poppet moving around and jamming. This allows consistent flow through all colour combinations.
O-rings and Seals – FloMAX use the machined parts to determine the proper crush ratio for sealing. The spring pressure is much less critical with this design and with the internal type seals these are much less susceptible to dirt and soil contamination than a face seal. The static seals are nitrile and the dynamic seals are fluoro silicone and the exposed nozzle poppet o-ring is made from viton.
TYPE WEIGHT
Nozzle (3/4” NPT) 0.4kg (0.9lb)
Nozzle (JIC) 0.5kg (1.1lb)
Receiver 0.3kg (0.6lb)
Evac Tool 0.45kg (1.0lb)
¾” NPT M
Aircraft grade aluminium
Flush Face design
Flush Face design
Comes with protective cap
High tensile cable
Highly engineered design
Easy to grip
41.2mm Hex nut 41.2mm
Hex nut
77.2mm
41mm
¾” NPT M
80mm
56.6mm
Features & dimensions
Hardened stainless steel
7quality industry solutions | www.jsgindustrial.com
53-FLN #16EVAC
Evacuation Tool
The Evacuation tool works like the master key and fits over all units. This unit only works in one direction ensuring no fluid is accidentally transferred back into the tank due to a built in check valve. These units are readily available in ¾“ NPT M, however can also can be ordered in a JIC M base.
53-FLR-C #153-FLR-C #2
53-FLR-C #3
53-FLR-C #4
53-FLR-C #5
53-FLR-C #6
53-FLR-C #753-FLR-C #8
53-FLR-C #9
53-FLR-C #10
53-FLR-C #11
53-FLR-C #12
8 JSG Industrial Systems | Flomax Catalogue
Standard Series - Engine & Coolant
FloMAX standard series engine & coolant connectors are fully compatible and interchangeable with industry standard connectors. The caps, plugs and connectors are all 100% metal, and manufactured using aircraft grade anodised aluminium and stainless steel. The colour-coded and labelled mating components provide for quick positive identification.
PART NO. DESCRIPTION
53-ENBL #1 Engine nozzle
53-ENBL-P #1 Engine nozzle w/ plug
53-ENBL PLUG Engine nozzle replacement plug
PART NO. DESCRIPTION
53-ERS #1 Engine receiver
53-ERS-C #1 Engine receiver w/ cap
53-ERS CAP Engine receiver replacement cap
PART NO. DESCRIPTION
53-CN Coolant nozzle
53-CN-P Coolant nozzle w/ plug
53-CN PLUG Coolant nozzle replacement plug
71.37mm
50.80mm65.53mm
45mm
1.625“ Hex
3/4“ NPT
1 3/8“ Hex
3/4“ NPT
59.18mm
26.67mm
38.6mm1 3/16“ Hex
1/2“ NPT
51.30mm
32mm
7/8“ Hex
1⁄2“ NPT
QUICK CONNECTORS
PART NO. DESCRIPTION
53-CR Coolant receiver
53-CR-C Coolant receiver w/cap
53-CR-CAP Coolant receiver replacement cap
53-CR-JIC Coolant receiver ¾” JICm
53-CR-C-JIC Coolant receiver w/cap ¾” JICm
9quality industry solutions | www.jsgindustrial.com
Standard Series - Hydraulic & Transmission
FloMAX standard series hydraulic & transmission connectors are fully compatible and interchangeable with industry standard connectors. The caps, plugs and connectors are all 100% metal, and manufactured using aircraft grade anodised aluminium and stainless steel. The colour-coded and labelled mating components provide for quick positive identification.
PART NO. DESCRIPTION
53-HN Hydraulic nozzle
53-HN-P Hydraulic nozzle w/ plug
53-HN PLUG Hydraulic nozzle replacement plug
PART NO. DESCRIPTION
53-TN Transmission nozzle
53-TN-P Transmission nozzle w/ plug
53-TN PLUG Transmission nozzle replacement plug
40.64mm
57.15mm
1.625“ Hex
3/4“-14 NPT F
67.56mm
47.24mm
1.625“ Hex
3/4“-14 NPT M
40.64mm
57.15mm
1 1/16“ Hex
1/2“-14 NPTM
44.45mm
30.48mm
7/8“ Hex
3/8“-18 NPT F
QUICK CONNECTORS
77.47mm
77.47mm
PART NO. DESCRIPTION
53-HR Hydraulic receiver
53-HR-C Hydraulic receiver w/cap
53-HR CAP Hydraulic receiver replacement cap
53-HR-JIC Hydraulic receiver ¾” JICm
53-HR-C-JIC Hydraulic receiver w/cap ¾” JICm
PART NO. DESCRIPTION
53-TR Transmission receiver
53-TR-C Transmission receiver w/cap
53- TR CAP Transmission receiver replacement cap
53-TR-JIC Transmission receiver ¾” JICm
53-TR-C-JIC Transmission receiver w/cap ¾” JICm
10 JSG Industrial Systems | Flomax Catalogue
R- Series – Engine & Coolant
FloMAX R-Series engine & coolant connectors are fully compatible and interchangeable with industry standard R-Series connectors. The caps, plugs and connectors are all 100% metal, and manufactured using aircraft grade anodised aluminium. The colour-coded and labelled mating components provide for quick positive identification.
PART NO. DESCRIPTION
53-R-EN Engine nozzle
53-R-EN-P Engine nozzle w/ plug
53-R-EN PLUG Engine nozzle replacement plug
PART NO. DESCRIPTION
53-R-ER Engine receiver
53-R-ER-C Engine receiver w/ cap
53-R-ER CAP Engine receiver replacement cap
PART NO. DESCRIPTION
53-R-CN Coolant nozzle
53-R-CN-P Coolant nozzle w/ plug
53-R-CN PLUG Coolant nozzle replacement plug
PART NO. DESCRIPTION
53-R-CR Coolant receiver
53-R-CR-C Coolant receiver w/ cap
53-R-CR CAP Coolant receiver replacement cap
77.22mm
57.15mm2“ Hex
3/4“ NPT F
63.5mm
26.67mm
1 3/4“ Hex
1.625-12UN-2Aor
1.312-12UN-2B
1 1/8“ Hex
1/2“ NPT P
64.2mm
33.78mm
63.5mm 1 1/4“ Hex
1.188-12UN-2Aor
0.875-14UN-2B
56.6mm
31mm
QUICK CONNECTORS
11quality industry solutions | www.jsgindustrial.com
R Series - Hydraulic & Transmission
FloMAX R-Series hydraulic & transmission connectors are fully compatible and interchangeable with industry standard R-Series connectors. The caps, plugs and connectors manufactured using aircraft grade anodised aluminium. The colour-coded and labelled mating components provide for quick positive identification.
PART NO. DESCRIPTION
53-R-HN Hydraulic nozzle
53-R-HN-P Hydraulic nozzle w/ plug
53-R-HN PLUG Hydraulic nozzle replacement plug
PART NO. DESCRIPTION
53-R-HR Hydraulic receiver
53-R-HR-C Hydraulic receiver w/ cap
53-R-HR CAP Hydraulic receiver replacement cap
PART NO. DESCRIPTION
53-R-TN Transmission nozzle
53-R-TN-P Transmission nozzle w/ plug
53-R-TN PLUG Transmission nozzle replacement plug
PART NO. DESCRIPTION
53-R-TR Transmission receiver
53-R-TR-C Transmission receiver w/ cap
53-R-TR CAP Transmission receiver replacement cap
2 1/4“ Hex
1.0 NPT F
40mm
61.47mm71.12mm
44.2mm
1 3/4“ Hex
1 3/8“ Hex
3/4“ NPT F
71.88mm
36.07mm
50.3mm 62.23mm
35.56mm
1 3/8“ Hex
1.312-12UN-2Aor
1.062-12UN-2B
QUICK CONNECTORS
1.875 12UN-2A
1.625 12UN-2B
87mm
12 JSG Industrial Systems | Flomax Catalogue
¾” Series Connectors
FloMAX ¾” Series Connectors are designed for greater fluid flow and to help prevent cross-contamination. Each connector is identified by colour and is non-interchangeable with other colour components. All connectors are manufactured using 100% metal component with anodised aluminium bases and stainless steel wear components. They use 10 stainless steel ball bearings for greater strength distribution. Each of the aluminium caps have an o-ring seal for greater prevention against contamination and each base are ¾” NPT male threads.
Nozzles*
Receivers**
53-ENBL #1RED
53-ENBL #2GOLD
53-ENBL #3TEAL
53-ENBL #4VIOLET
53-ENBL #5NAVY
53-ENBL #6COPPER
53-ERS #1RED
53-ERS #2GOLD
53-ERS #3TEAL
53-ERS #4VIOLET
53-ERS #5NAVY
53-ERS #6COPPER
* To order nozzles with plugs please add -P. For example 53-ENBL-P #1. For plug only : 53-ENBL PLUG # (1-6)
QUICK CONNECTORS
** To order receiver with caps please add -C. For example 53-ERS-C #1. For cap only : 53-ERS CAP # (1-6)
The “#“ is part of the product code.
13quality industry solutions | www.jsgindustrial.com
¾” Series Connectors - High Pressure Stainless Steel
FloMAX have also engineered a ¾ ” series connectors to handle a working pressure of 1500 psi. Each connectors identified by colours is non-interchangeable with other colour connectors. All the connectors are manufactured using 100% metal. The main difference between these units to the standard ¾” series is that all the internal components and the base are made from stainless steel. The pullback, plugs and caps are the only ones made from aluminium. It still uses 10 stainless steel ball bearings for a strong latch.
Nozzles*
Receivers**
53-EN-SS #1RED
53-EN-SS #2GOLD
53-EN-SS #3TEAL
53-EN-SS #4VIOLET
53-EN-SS #5NAVY
53-EN-SS #6COPPER
53-ER-SS #1RED
53-ER-SS #2GOLD
53-ER-SS #3TEAL
53-ER-SS #4VIOLET
53-ER-SS #5NAVY
53-ER-SS #6COPPER
* To order nozzles with plugs please add -P. For example 53-EN-SS-P #1. For plug only : 53-ENBL PLUG # (1-6)
QUICK CONNECTORS
** To order receiver with caps please add -C. For example 53-ER-SS-C #1. For cap only : 53-ERS CAP # (1-6)
The “#“ is part of the product code.
14 JSG Industrial Systems | Flomax Catalogue
¾” Series Connectors - JIC Bulkhead
FloMAX ¾” Series Connectors are also available with a JIC bulkhead base. Each connector is identified by colour and is non-interchangeable with other colour components. They use 10 stainless steel ball bearings for greater strength distribution. Each of the aluminium caps have an o-ring seal for greater prevention of contaminate and each base are ¾” NPT male threads.
¾” Series Connectors - Evacuation Tool
FloMAX ¾” Series Connectors use a universal evacuation tool. This tool works like the master key and can latch onto to any of the receivers as long as it is part of the ¾” series.
Receivers*
53-ERJ-C #1RED
53-ERJ-C #2GOLD
53-ERJ-C #3TEAL
53-ERJ-C #4VIOLET
53-ERJ-C #5NAVY
53-ERJ-C #6COPPER
53-UN34-P
53-ERS-C # 1 - 6
53-ER-SS-C # 1 – 6
53-ERJ-C # 1 – 6
Works across the below range of receivers
PART NUMBER DESCRIPTION
53-UN34 Universal 3⁄4“ series draining nozzle
53-UN34-P Universal 3⁄4“ series draining nozzle w/ plug
53-UN34-PLUG Universal 3⁄4“ series draining nozzle - plug only
* To order receiver without caps please remove -C. For example 53-ERJ #1. For cap only : 53-ERS CAP # (1-6)
QUICK CONNECTORS
The “#“ is part of the product code.
15quality industry solutions | www.jsgindustrial.com
1” High Flow Series Connectors
FloMAX have designed a 1” high flow series connectors to handle higher flow rates. Each connectors identified by colours is non-interchangeable with other colour connectors. It still uses 10 stainless steel ball bearings for a strong latch like the ¾” series but allows for higher burst pressure.
Nozzle*
Receivers**
53-HFN #1RED
53-HFN #2GOLD
53-HFN #3TEAL
53-HFN #5NAVY
53-HFN #6COPPER
53-HFN #7BLUE/GREY
53-HFN #4VIOLET
53-HFR #1RED
53-HFR #2GOLD
53-HFR #3TEAL
53-HFR #5NAVY
53-HFR #6COPPER
53-HFR #7BLUE/GREY
53-HFR #4VIOLET
* To order nozzles with plugs please add -P. For example 53-HFN-P #1. For plug only : 53-HFN PLUG # (1-7)
QUICK CONNECTORS
** To order receiver with caps please add -C. For example 53-HFR-C #1. For cap only : 53-HFR CAP # (1-7)
The “#“ is part of the product code.
16 JSG Industrial Systems | Flomax Catalogue
FN600 Nozzle
The FN600 provides the well-known elaster dog latching mechanism with 9 stainless steel dogs. It works great in maintenance facilities and other less harsh environments as it securely latches with a “snap” when correctly connected to a receiver.
FloMAX Fuel Nozzles connect to all standard fuel receivers. The plug is specially designed to seal out dirt and contaminants which is made from PVC and a ¼” wire lanyard. A removable piston assembly allows the cylinder to be easily removed for rebuilding.
� Smallest and lightest diesel nozzle in the industry � Highest maximum flow rate of any 1 ½ inch diesel fuel
nozzle � All the FloMAX nozzles endure a 11,360L (3,000gal) test
prior to shipment to ensure function and no leakage
STANDARD DIESEL NOZZLE
1 ½“ Fuel Nozzle w/ Dog Lock NoseAvailable with sealing plug or swivel
PART NO. DESCRIPTION
53-FN600-NS Nozzle without plug
53-FN600-P-NS Nozzle with plug
53-FN600 PLUG Nozzle - plug
Standard shutoff set at 55 kPa (8.0 psi); FloMAX nozzles can be set from 40 kPa (5.5 psi) shutoff to 90 kPa (13.00 psi) shutoff as required.
Minimum Flow Rate 151 (40 gpm)
Maximum Flow Rate 600 lpm (180 gpm)
Working pressure 860 kPa (125 psi)
Burst pressure 1,724 kPa (250 psi)
Nozzle weight 2.7kg (5 lbs 14oz) (without swivel)
Nozzle swivel thread 1 ½” NPT F
377.7mm
218.
6mm
127m
m
Ø 75
mm
53-FNS
FloMAX provide a 1 ½” NPT M x 1 ½” NPT F swivel which uses a stainless steel male threaded base and a hard/anodized 1 ½” female NPT nut. The swivels are sealed with two fluorosilicate O-Rings for superior performance even in extreme temperature conditions. The nut and base swivel on 32 stainless steel ball bearings for smooth and consistent movement across all pressure ranges.
17quality industry solutions | www.jsgindustrial.com
FNBL Nozzle
The FNBL has excellent performance and reliability in harsh conditions. The pullback castle is removable without tools, making it the easy to clean and allowing it to be maintained and repaired in the field. The FNBL latches with 10 stainless steel balls making it very simple to use and forgiving.
FloMAX Fuel Nozzles connect to all standard fuel receivers. The plug is specially designed to seal out dirt and contaminants which is made from PVC and a ¼” wire lanyard. A removable piston assembly allows the cylinder to be easily removed for rebuilding.
� Smallest and lightest diesel nozzle in the industry � Highest maximum flow rate of any 1 ½ inch diesel fuel
nozzle � All the FloMAX nozzles endure a 11,360 L (3,000 gal.)
test prior to shipment to ensure function and no leakage
PART NO. DESCRIPTION
53-FNBL-NS Nozzle without plug
53-FNBL-P-NS Nozzle with plug
53-FNBL PLUG Nozzle - plug
Minimum Flow Rate 151 (40 gpm)
Maximum Flow Rate 900 lpm (238gpm)
Working pressure 860 kPa (125 psi)
Burst pressure 1,724 kPa (250 psi)
Nozzle weight 2.7kg (5 lbs 14oz) (without swivel)
Nozzle swivel thread 1 ½” NPT F
1 ½“ Fuel Nozzle w/ Ball Lock NoseAvailable with sealing plug or swivel
Standard shutoff set at 55 kPa (8.0 psi); FloMAX nozzles can be set from 40 kPa (5.5 psi) shutoff to 90 kPa (13.00 psi) shutoff as required.
377.7mm
218.
6mm
127m
m
Ø 75
mm
53-FNS
FloMAX provide a 1 ½” NPT M x 1 ½” NPT F swivel which uses a stainless steel male threaded base and a hard/anodized 1 ½” female NPT nut. The swivels are sealed with two fluorosilicate O-Rings for superior performance even in extreme temperature conditions. The nut and base swivel on 32 stainless steel ball bearings for smooth and consistent movement across all pressure ranges.
STANDARD DIESEL NOZZLE
18 JSG Industrial Systems | Flomax Catalogue
DIESEL FUEL RECEIVERS
Standard Diesel Fuel Receivers
FloMAX Fuel Receivers are designed with a patented enclosed poppet stem spring that provides a smooth fuel flow path. This extends both the life of the receiver and the fuel nozzle. The spring is completely enclosed inside the poppet, removing the spring from the flow path, which increases fuel flow and reduces backpressure and vibration. All 1 ½” FloMAX fuel receivers are compatible with industry standard fuel nozzles.
Removable Sleeve Diesel Fuel Receivers
The FR-RS removable sleeve fuel receiver has an aircraft grade anodized aluminium body with a removable stainless steel wear sleeve. This revolutionary patented concept allows the fuel receiver wear surfaces to be replaced without removing the fuel receiver from the tank or the loss of any fuel. The single poppet design has the same reduced backpressure, reduced vibration, and increased flow rate as the FRA, FRS and FR-LP receivers.
53-FRA-C Anodised aircraft grade aluminium
53-FRS-CZinc plated steel
53-FR-RS-C
Sleeve removed
53-FR-RS-R (Removable sleeve)
19quality industry solutions | www.jsgindustrial.com
Anti-theft, Removable Sleeve Diesel Fuel Receivers
FloMAX have simplified the solution for fuel theft. Their innovative design allows maximum flow with minimum back pressure. This can also have the option to have the removable sleeve which can be removed without actually removing the whole receiver. This provides maintenance savings as well as security.
*Note: To order receivers without cap drop “-C” from product code.
Receiver Part Numbers*
All Receivers Height: 117mm (4.6”)All Receiver Hex: 2.5”
PART NO. DESCRIPTION
53-FRA-C Anodised aluminium w/ cap
53-FRS-C Zinc plated steel w/ cap
53-FR-RS-C Aluminium receiver & removable sleeve w/ cap
53-FRA-AT-C Aluminium anti theft w/ cap
53-FR-RS-AT-C Anti theft with removable sleeve w/ cap
53-FRS-LP-C Zinc plated steel – Low pressure (for non pressure systems) w/ cap
53-FRA-LP-C Anodised aluminium – Low pressure (for non pressure systems) w/ cap
53-FR-RS-R Replacement sleeve for 1.5“ receivers (can also be ordered for non pressure systems)
53-FR-AT-Cw/ Anti Theft receiver
Receiver in “CLOSED“ position from nozzle connection
Anti-Theft Design
Spring enclosed within poppet
Receiver with poppet pushed in only “WITHOUT FLOW“ shows the anti-theft mechanism still in place preventing fuel from flowing out
of the tank
Poppet pushed in – NO FLOW
Poppet and anti-theft mechanism move independently of each other
Receiver connected to a nozzle which not only opens the poppet, but also provides flow which slides the anti-theft mechanism allowing
flow to travel in one direction
Poppet depressed by nozzle
DIESEL FUEL RECEIVERS
20 JSG Industrial Systems | Flomax Catalogue
FX1500* Diesel Fuel Nozzle
The FX1500 is the high flow fuel nozzle capable of reaching 1500 LPM. It has the patented removable cylinder shut off mechanism. The FX1500 uses the same O-Ring and Delrin internal components that have been tested to -45º C (-50º F) in Northern Canada.
� High flow � 10 Stainless Steel ball bearings for latch � Strong and robust body � All the FloMAX nozzles endure a 11,360L (3,000gal) test
prior to shipment to ensure function and no leakage
FRX Diesel Fuel Receiver (2“)
The FRX fuel receiver must be used with the FX1500. The FRX receiver has a special removable sleeve so that the receiver may stay in place and can be replaced when ever it is worn.
PART NO. DESCRIPTION
53-FX1500-P Nozzle with plug
53-FX1500 PLUG Nozzle - plug
Maximum Flow Rate 1,514 lpm (396 gpm)
Working pressure 860 kPa (125 psi)
Burst pressure 1,724 kPa (250 psi)
Nozzle weight 4.1kg (9lb)
Nozzle swivel thread 2” NPT F
Standard Shutoff 8.0 PSI
2“ Fuel Nozzle w/ Ball Lock NoseAvailable with sealing plug or swivel
427.5mm
320mm
169.2mm
112.5mm
Ø 94
mm
PART NO. DESCRIPTION
53-FRX-C 2” High flow receiver w/ cap
53-FRX 2” High flow receiver, no cap
53-FR2-R 2” Replacement sleeve for receiver
53-FRX Cap 2” Replacement cap 53-FX1500
*Please refer to page 21 for campatible swivels
HIGH FLOW DIESEL NOZZLE & RECEIVER
53-SW2
FloMAX provide a 2” NPT M x 2” NPT F swivel which uses a stainless steel male threaded base and a hard/anodized 2” female NPT nut. The swivels are sealed with two fluorosilicate O-Rings for superior performance even in extreme temperature conditions. The nut and base swivel on 32 stainless steel ball bearings for smooth and consistent movement across all pressure ranges.
21quality industry solutions | www.jsgindustrial.com
SWIVELS
Standard Swivels
FloMAX Swivels feature all metal construction and have a stainless steel male threaded base and a hard/anodized 1 ½” or 2” female NPT nut. The swivels are sealed with two fluorosilicate O-Rings for superior performance even in extreme temperature conditions. The nut and base swivel on 32 stainless steel ball bearings for smooth and consistent movement across all pressure ranges. The swivels are industry standard NPT threads.
53-FNS1.5” NPTM x 1.5” NPTF
53-FNS22” NPTM x 1.5” NPTF
53-SW22” NPTM x 2” NPTF
SPECIAL NOTE: Nozzles with Swivels*
FloMAX fuel nozzles can be bought with a swivel (such as the ones pictured below) are not industry standard swivels. These swivels a specially made for fuel nozzles and are for replacements only and should not be ordered for other brand fuel nozzles. The below illustrates how FNBL & FN600 have one matching swivel and the FX1500 fuel nozzle swivel replacement only has one option.
53-FNBLSNozzle Swivel
53-FX1500 Swivel2” Nozzle Swivel
STANDARD HIGH FLOW
Nozzle threads (Specially designed
for FloMAX fuel nozzles)
1 ½“ NPT F 2“ NPT F
* Please speak to you JSG representatives for product codes regarding nozzles with swivels
22 JSG Industrial Systems | Flomax Catalogue
Bulk Transfer Nozzle
The FloMAX Bulk Fuel Nozzle will transfer large volumes of fuel at high flow rates using existing standard 1 ½ inch fuel receivers. The BFN has a push-to-connect design that releases from the receiver with a gentile pull on the pullback or poly coated stainless steel lanyard. This is a dry break nozzle that uses the FloMAX fuel nozzle vulcanized Viton seal valve sleeve.
Gravity Fill Receivers
The FloMAX Gravity Fill Receivers are made from anodized aircraft grade aluminium. They have a welded on cast aluminium handle for strength and convenience. The tube comes in 2 diameters, the standard 1 ½” and the 1” for use in filling smaller opening fuel tanks. Both diameter sizes come in either straight, with a 45 degree bend, or with a 90 degree bend.
Straight
Operating pressure 2,070 kPa (300 psi)
Burst pressure 4,310 kPa (625 psi)
PART NO. DESCRIPTION
53-BFN-P Bulk fuel nozzle w/plug
53-BFN Bulk fuel nozzle only
53-BFN PLUG Bulk fuel nozzle - plug only
PART NO. DESCRIPTION
53-GFR-0 Gravity fill receiver – 1 ½”, Straight
53-GFR-45 Gravity fill receiver – 1 ½”, 45˚
53-GFR-90 Gravity fill receiver – 1 ½”, 90˚
53-GFR1-0 Gravity fill receiver – 1” , Straight
53-GFR1-45 Gravity fill receiver – 1” , 45˚
53-GFR1-90 Gravity fill receiver – 1”, 90˚45°
90°
OTHER NOZZLE & RECEIVERS
23quality industry solutions | www.jsgindustrial.com
3” FUEL NOZZLE & RECEIVER
The FloMAX 3 inch nozzles and receivers are designed for high flow volume and ease of use. They are a scaled down version of the standard 5 inch API specification. Poppets have a vulcanized Viton seal. Both the nozzle and receivers are machined from aircraft grade anodized aluminium and stainless steel. Receivers are available with 4 base styles. Nozzle latching mechanism uses 6 stainless steel dogs for a secure and positive connection and the locking handle keeps the nozzle from accidently being disconnected during fuelling. The connectors have an excellent flow rate up to 4542 lpm (1200 gpm) at 100 psi.
Max Flow Rate 4542.50 lpm
Working Pressure 8.3 bar (120 psi)
PART NO. DESCRIPTION
53-FN3 3” High flow fuel nozzle
53-FR3 3” High flow receiver with 3” NPT base
53-FR3-F 3” Fuel receiver with flange base (8 bolt pattern)
53-FR3-4NPT 3” Fuel receiver with 4” NPT base
53-FR3-NP 3” Fuel receiver w/ non-pressure valve 4” NPT threads
53-FR3-NP-4NPT 3” Non-pressure valve with 4” NPT front end
53-FR3-NP-3NPT 3” Non-pressure valve with 3” NPT front end
53-FN3 Fuel Nozzle w/ Dog lock mechanism
53-FR3 3“ receiver w/ 3“ NPTM base
53-FR3-4NPT 3“ Fuel receiver w/ 4“ NPT base
53-FR3-F 3“ Fuel receiver w/ 8 bolt pattern
(TTMA flange base)
24 JSG Industrial Systems | Flomax Catalogue
PRESSURED SYSTEM FUEL VENTS
Standard Fuel Vents
FloMAX Fuel Vents are manufactured using 100% metal components. A billet aircraft grade anodized aluminium cap provides superior impact strength as opposed to the less expensive and weaker plastic and cast aluminium caps on other vents. The float and sealing balls are housed in a ridged ball tube, not the flexible and easily damaged ball spring. This will ensure a positive seal that will not be damaged by vibration and movement. FloMAX vents are available in all standard configurations including male or female threaded outlets, ant-vandalism mount, and half couplings. Stem tubes are available in standard 5”, 7”, 9”, 11” and custom customer specified lengths.
PART NO. DESCRIPTION
53-VT Fuel Vent - Standard (5“ stem)
53-VT-7 Fuel Vent - Ext Stem (7“ stem)
53-VT-9 Fuel Vent - Ext Stem (9“ stem)
53-VT-11 Fuel Vent - Ext Stem (11“ stem)
53-VT-C Fuel Vent - w/Half Coupling (5“ stem)
53-VT-C-7 Fuel Vent - w/Half Coupling (7“ stem)
53-VT-C-9 Fuel Vent - w/Half Coupling (9“ stem)
53-VT-C-11 Fuel Vent - w/Half Coupling (11“ stem)
53-VT-A Fuel Vent with Anti-Vandalism Mount
53-VT-A-S Fuel Vent - Anti Vandalism Sleeve only
53-VT-A-7 Fuel Vent - Anti Vandalism (7“ stem)
53-VT-A-9 Fuel Vent - Anti Vandalism (9“ stem)
53-VT-A-11 Fuel Vent - Anti Vandalism (11“ stem)
53-VT-T Fuel Vent - M Threaded Outlet (5“ stem)
53-VT-T-7 Fuel Vent - M Threaded Outlet (7“ stem)
53-VT-T-9 Fuel Vent - M Threaded Outlet (9“ stem)
VT-T-11 Fuel Vent - M Threaded Outlet (11“ stem)
53-VTStandard fuel vent – 5” Stem
53-VT-TFuel Vent with Male
Threaded outlet – 5” Stem
53-VT-CFuel vent with half coupling – 5” Stem
53-VT-AFuel vent with Anti-vandalism mount
PART NO. DESCRIPTION
53-VT-TF Fuel Vent - F Threaded Outlet (5“ stem)
53-VT-TF-7 Fuel Vent - F Threaded Outlet (7“ stem)
53-VT-TF-9 Fuel Vent - F Threaded Outlet (9“ stem)
53-VT-TF-11 Fuel Vent - F Threaded Outlet (11“ stem)
53-VTF Fuel Vent with Filter - Standard (5“ stem)
53-VTF-7 Fuel Vent with Filter - Standard (7“ stem)
53-VTF-9 Fuel Vent with Filter - Standard (9“ stem)
53-VTF-11 Fuel Vent with Filter - Standard (11“ stem)
53-VTF-T Fuel Vent with Filter - M Threaded Outlet (5“ stem)
53-VTF-T-7 Fuel Vent with Filter - M Threaded Outlet (7“ stem)
53-VTF-T-9 Fuel Vent with Filter - M Threaded Outlet (9“ stem)
53-VTF-T-11 Fuel Vent with Filter - M Threaded Outlet (11“ stem)
53-VTF-TF Fuel Vent with Filter - F Threaded Outlet (5“ stem)
53-VTF-TF-7 Fuel Vent with Filter - F Threaded Outlet (7“ stem)
53-VTF-TF-9 Fuel Vent with Filter - F Threaded Outlet (9“ stem)
53-VTF-TF-11 Fuel Vent with Filter - F Threaded Outlet (11“ stem)
25quality industry solutions | www.jsgindustrial.com
High Flow Vents
These high flow vents are capable of handling 1500 LPM. All vents are available with standard 5”, 7”, 9”, and 11” stem tube, see below options.
PART NO. DESCRIPTION
53-VTX High Flow Vent - Standard (5“ stem)
53-VTX-7 High Flow Vent - Ext Stem (7“ stem)
53-VTX-9 High Flow Vent - Ext Stem (9“ stem)
53-VTX-11 High Flow Vent - Ext Stem (11“ stem)
53-VTX-C High Flow Vent - w/Half Coupling (5“ stem)
53-VTX-C-7 High Flow Vent - w/Half Coupling (7“ stem)
53-VTX-C-9 High Flow Vent - w/Half Coupling (9“ stem)
53-VTX-C-11 High Flow Vent - w/Half Coupling (11“ stem)
53-VTX-A-S High Flow Vent - Anti Vandalism Sleeve only
53-VTX-A-7 High Flow Vent - Anti Vandalism (7“ stem)
53-VTX-A-9 High Flow Vent - Anti Vandalism (9“ stem)
53-VTX-A-11 High Flow Vent - Anti Vandalism (11“ stem)
53-VTX-F-RT-5 High Flow Vent-Filter capable rotatable top (5“ stem)
53-VTX-F-RT-7 High Flow Vent Filter capable rotatable top (7“ stem)
53-VTX-F-RT-9 High Flow Vent Filter capable rotatable top (9“ stem)
53-VTXHigh Flow Fuel Vent Standard 5” Stem
Pressurised System
Below is an example of a how a pressurised system works and the components used from FloMAX.
Above image shows tank being filled Fuel nozzle shuts off as fuel has reached the base of the fuel vent actuating pressure and shutting off the nozzle
PRESSURED SYSTEM FUEL VENTS
Nozzle Open
Nozzle Shut off
26 JSG Industrial Systems | Flomax Catalogue
Most non-pressure systems are un-avoidably complicated and require many components and parts to work together systematically in a variety vehicles. Many of these types of systems generally have one or more of the components fail, rendering the entire system on stand-by until the part(s) are replaced or serviced. This can mean a loss of time and money and hence leading to low productivity. FloMAX has developed a simple Non-Pressure System (NPS) that does not require a vast amount of components and still delivers the results required. They use quality materials such as aircraft grade aluminium alloy and stainless steel to produce the best product life span. These systems are available in external or internal setup and are tested prior to leaving the factory to ensure it works flawlessly every time, time after time.
Internal System Key Components
The internal non pressured system requires 2 main components. The 53-FR-NP and your choice of fuel vent. The system is setup is such a ways
Non-Pressure Valve/Receiver
This unit is a combined receiver and valve for internal systems. It features a removable sleeve which allows the client to replace when it becomes worn over time. The unit features the same spring and poppet design from FloMAX range allowing for minimal obstruction to the flow.
Internal Non Pressure Fuel Vent
For every internal system fuel vent there is a 9/16” JIC M located on the bottom of the fuel vent as shown in the picture. It is to be connected to the above non-pressure valve/receiver. Once the diesel fuel reaches the cut-off, it sends opposing pressure down the signal line to the vent/receiver and shuts-off the nozzle. The fuel vents come in a variety of options to suite almost any application.
Please refer part number table on page 28.
NON-PRESSURE SYSTEMS
53-VT-NP-IInternal diesel fuel vent
53-FR-NPInternal diesel fuel receiver/valve
156mm
59.4mm96.77mm
9/16 JIC
2“ NPT
2.5“ FLATS
Ø 46
.23m
m
Ø 50
.8m
m
69.3
4mm
Ø 62
.5m
m
71.89mm
27quality industry solutions | www.jsgindustrial.com
External System Key Components
Non Pressure Valve /External
This unit accepts industry standard fuel receivers as well as the FloMAX 53-FRX for application with high flows with a 2” NPT F receiver port. It has a 2” NPT M for tank side and 3 x signal line ports assisting in installation factors.
Fuel Receiver – Low Pressure Fuel Receiver
For every external system ordered a fuel receiver will also be supplied. The steel receiver is zinc plated and can also be ordered in aluminium. They contain a special spring for low pressure to operate with the external system. This can also be ordered with the option of a removable sleeve for easy service and low cost maintenance.
External Non Pressure Fuel Vent
For every external system fuel vent there is a 9⁄16” male JIC for external signal line. It is to be connected to the above non-pressure valve via a signal line. Once the diesel fuel reaches the fuel vent cut-off, it sends opposing pressure down the signal line to the fuel vent/receiver and shuts-off the fuel nozzle. The fuel vents come in a variety of options to suit almost any application.
Please refer to part number table on page 28.
LINE x3 OF 1/4" NPT F HYDRAULIC COMMUNICATION
2"NPT FEMALE
TRUE R53.85
2"NPT MALE
101.
60 H
EX69
.85
HEX
94.16120.83
53-NPVExternal non-pressure valve
53-FR-LPDiesel fuel receiver low pressure
53-VT-NP-EExternal diesel fuel vent
NON-PRESSURE SYSTEMS
LINE x3 OF 1/4" NPT F HYDRAULIC COMMUNICATION
2"NPT FEMALE
TRUE R53.85
2"NPT MALE
101.
60 H
EX69
.85
HEX
94.16120.83120.83mm
94.16mm
2“ NPT MALE
69.8
5mm
HEX
101.
60m
m H
EX
Hydraulic communication line x3 of ¼“ NPT F True R53.85
2“ NPT FEMALE
28 JSG Industrial Systems | Flomax Catalogue
Choosing the Right Kit for You
Replace “?” with the appropriate number:
1 = EXTERNAL system which comes with 53-NPV & 53-FRS-LP and Fuel Vent (description below)
2 = INTERNAL system which comes with 53-NPSO and Fuel Vent (description below)
Other diesel fuel vent lengths are available (7“, 9“ and 11“). Speak to your JSG representative for further details. For example: 53-NPS-1-7-nh (7“ stem)
PART NO. DESCRIPTION AIR EGRESS AIR INGRESS
53-NPS-?-NH Standard Stem (5” Stem) - 1.5“ hose outlet Dual Dual
53-NPS-?-C-NH w/ Half Coupling - (Standard - 5“ Stem) - 1.5“ hose outlet Dual Dual
53-NPS-?-A-NH Anti Vandalism (Standard - 5” Stem) Dual Dual
53-NPS-?-F-NH Rotatable Top (Standard 5” Stem) 1.5” Hose outlet 1 1/16” JIC M
53-NPS-?-T-NH w/ Male threaded outlet (5” Stem) Dual - Customer to Nominate Thread
Dual - Customer to Nominate Thread
53-NPS-?-TF-NH w/ Female threaded outlet (5” Stem) Dual - Customer to Nominate Thread
Dual - Customer to Nominate Thread
53-NPS-?-T-RT-NH w/ Rotating Top for filter (ingress) and Male threaded outlet (egress)
1 1/16” JIC M Customer Nominated Thread
53-NPS-?-TF-RT-NH w/ Rotating Top for filter (ingress) and Female threaded outlet (egress)
1 1/16” JIC M Customer Nominated Thread
Example of NPS systems
EXTERNAL SYSTEM INTERNAL SYSTEM
53-NPS-1-NH(Standard Fuel Vent 5” stem + 53-NPV & 53-FRS-LP)
53-NPS-2-NH(Standard Fuel Vent 5” stem + 53-NPSO)
NON-PRESSURE SYSTEMS
29quality industry solutions | www.jsgindustrial.com
NON-PRESSURE SYSTEM - ACCESSORIES
Air Filter & Bracket Assembly
This accessory has the ability to filter out the dust and particles with a 3 micron filter for the ingress of air. It comes with a mounting bracket and can have the filter easily replaced. Most sites prefer to have a filter included in their systems to prevent large particles and dust from entering the fuel tank.
PART NO. DESCRIPTION
53-NPS Filter Kit Non pressure system filter kit (1 1/16“ JIC M)
53-NPS-FB Non pressure filter bracket assembly
53-NPS Filter 3 micron, filter can only
Signal hoses
PART NO. DESCRIPTION
53-SL-P-1MTR 1.0m S/S Braided signal hose
53-SL-P-1.5MTR 1.5m S/S Braided signal hose
53-SL-P-2MTR 2.0m S/S Braided signal hose
53-SL-P-3MTR 3.0m S/S Braided signal hose
53-SL-P-4MTR 4.0m S/S Braided signal hose
53-SL-P-5MTR 5.0m S/S Braided signal hose
53-SL-P-8MTR 8.0m S/S Braided signal hose
53-NPS Filter Kit
53-NPS Filter53-NPS-FBFront view
53-NPS-FBSide view
PART NO. DESCRIPTION
53-FH-1 1.0m remote filter mount breather hose
53-FH-2 2.0m remote filter mount breather hose
53-FH-3 3.0m remote filter mount breather hose
53-FH-4 4.0m remote filter mount breather hose
53-FH-5 5.0m remote filter mount breather hose
53-FH-6 6.0m remote filter mount breather hose
53-FH-7 7.0m remote filter mount breather hose
Fuel/Filter Hoses
127.00mm101.6mm 92.07mm
37.6
0mm
Ø 9.5mm
1 1/16 JIC
1“-12 UN12.7mm
30 JSG Industrial Systems | Flomax Catalogue
CA
B
EXAMPLES OF NON-PRESSURE SYSTEMS
D
SYSTEM 1 BREAKDOWN
A+B 53-NPS-2-NH (Includes internal fuel vent and fuel receiver valve)
ACCESSORIES
C Bell Housing (refer to pg 33)
D Stainless steel braided signal hose (refer to pg 29)
C
A*order 2nd receiver valve seperately 53-NPSO
D
B
E F
SYSTEM 2 BREAKDOWN
A+B 53-NPS-2-F-NH (Includes internal fuel vent and fuel receiver valve) Fuel vent has 1 1/16“ JIC M for filter
ACCESSORIES
C Bell Housing x 2 (refer to pg 33)
D ¾“ JIC M T-Section (this component is not supplied by JSG)
E ¾“ Hose (refer to pg 29)
F 53-NPS Filter Kit
G Stainless steel braided signal hose (refer to pg 29)
G
System 1
System 2
31quality industry solutions | www.jsgindustrial.com
A
B
CD
E
SYSTEM 3 BREAKDOWN
A+B+C 53-NPS-1-NH (Includes external fuel vent, NPV and fuel receiver)
ACCESSORIES
D Stainless steel braided signal hose (refer to pg 29)
E Fuel hose
SYSTEM 4 BREAKDOWN
A+B+C 53-NPS-1-F-NH (Includes external fuel vent, NPV and fuel receiver)
ACCESSORIES
D 53-NPS Filter Kit
E 3/4“ Hose (refer to pg 29)
F Stainless steel braided signal hose (refer to pg 29)
G Fuel hose for overfill
A
B
C
D
E
F
G
System 3
System 4
EXAMPLES OF NON-PRESSURE SYSTEMS
32 JSG Industrial Systems | Flomax Catalogue
A
BE
C D
F
G
SYSTEM 1 BREAKDOWN
A+B+C 53-NPS-1-F-FRX-NH (Includes external fuel vent, NPV and FRX fuel receiver)
ACCESSORIES
D 53-NPS Filter Kit
E 53-FX1500-S-P (refer to pg 8)
F 3/4“ Hose (refer to pg 29)
G Stainless steel braided signal hose
Please note when using non pressured system for 1500 LPM the system must be an external set up as it is the only one capable of handling the high flow rates. The receiver and fuel nozzle are not compatible with other brands.
System 2 (Pressurised)
System 1 (Non-pressurised)
When using pressurised system for 1500 lpm please ensure the correct ullage is determined by selecting the appropriate fuel vent stem length. This can avoid any issues relating to shut off. Please speak to your JSG representative for futher details.
A
E D
BCF
SYSTEM 2 BREAKDOWN
A 53-FRX (Hi-flow fuel receiver)
B 53-VTX-F-RT-5 High Flow Vent-Filter capable rotatable top (5“ stem)
C 53-NPS Filter Kit
D 53-FX1500-S-P (refer to pg 8)
ACCESSORIES
E Bell housing (refer to pg 33)
F 3/4“ Hose (refer to pg 29)
HI FLOW SYSTEMS (1500 L/MIN)
33quality industry solutions | www.jsgindustrial.com
Bell Housings
The FloMAX Bell Housings are available for those applications where the receiver needs to be inset either in the fuel tank or on a bulkhead. Bell Housings are made from formed mild steel with a welded on 2” NPT pipe coupling. They are available in either bolt-on or weld-on configurations.
Breakaway Valves
The FloMAX 2-inch and 3-inch BreakAway Valves are constructed of zinc-plated steel and anodized aircraft grade aluminium. The BAV2 and BAV3 are designed with three shear studs that will break at a designated force when mounted correctly. This will help protect more expensive refuelling equipment and help prevent spillage. To insure appropriate separation at designated foot-pound force, BAV valves must be correctly mounted on BAV Mounts.
ACCESSORIES
53-BAV2 53-BAV2-MB 53-BAV3 53-BAV3-MB
Weld on bell housing Bolt on bell housing
Working Pressure 1,380 kPa (200 psi)
Burst pressure 5,170 kPa (750 psi)
PART NO. DESCRIPTION
53-BH-W Bell Housing (Weld)
53-BH-F Bell Housing (Bolt on)
Double In-line Swivel
This swivel features all metal construction and a hard/anodized 2 x 1 ½” female NPT nut. The swivels are sealed with two fluorosilicate O-Rings for superior performance even in extreme temperature conditions.
53-FNSID 1.5” NPTF x 1.5” NPTF
127.00mm
2“ NPTF Thread
Ø70
Ø92.
50
Every effort has been made to ensure all information and photographs contained in this publication were correct and accurate at time of printing, however no warranty is given in respect of this publication and JSG Industrial Systems Pty Ltd (JSG) shall not be liable for any error therein. Technical information, specifications and products shown may be subject to change without prior notice. Pictures shown are for illustration purposes only. WARNING: For sale and proper use consult instructions, the supplier or JSG. Contact your nearest JSG Distributor for latest information.
© 2015 JSG Industrial Systems Pty Ltd., All rights reserved. F1215
www.jsgindustrial.com
HEAD OFFICE
Unit 1, 21 Amour St Revesby NSW 2212
PO Box 333 Milperra NSW 2214
Ph: (02) 9914 8720 Fax: (02) 9914 8798
Email: [email protected]
Sydney | Melbourne | Perth | Brisbane | Adelaide | Townsville | Mackay | Indonesia