iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
The iw6 TDC is a full bandwidth in wall speaker system, using a 165mm (6.50") Tannoy
Dual Concentric™ point source, constant directivity drive unit with an additional 25mm
(1.00") Tannoy SuperTweeter™. Designed primarily for installation into standard stud
partition wall systems, it may also be used in cavity wall installations constructed with
standard thickness drywall as well as a wide range of other wall construction types with a
surface thickness of up to 25mm (1.00”).
High power handling and 91dB efficiency ensure this compact unit is ideally suited to
applications requiring the combination of premium sonic quality for music and speech
reinforcement and exceptional reliability and intelligibility.
The 165mm (6.50") Tannoy Dual Concentric™ drive unit comprises a multi fibre paper
pulp mid bass cone and a 25mm (1.00") ferrofluid cooled, titanium dome HF unit with
neodymium magnet system. The mid-bass and tweeter sections of this constant directivity
driver are coincidentally aligned to a true point source; ensuring a wide and controlled
dispersion for optimum coverage; this while avoiding the massive loss of energy, in the
vertical plane at the crossover frequency, inherent in two-way discrete designs.
The addition of a 25mm (1.00") titanium dome SuperTweeter™ extends the frequency
bandwidth out to over 50kHz, further enhancing the already class leading, low distortion
performance of the iw6 TDC with an exceptionally natural and open soundstage. The iw6
TDC is also equipped with dynamic high frequency protection.
The drivers and passive frequency dividing network are mounted in an injection moulded,
paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.
The class leading performance is further enhanced by the inclusion of six self aligning,
spring loaded clamps; allowing for quick install but also for simple removal or reorientation
of the loudspeaker. The rigidity of the clamps and baffle combination crucially provides the
acoustically optimum bond to the wall surface without risk of distortion to the baffle itself.
Gold plated spring loaded terminals are provided for ease of installation and a steel back
can is available as an optional installation accessory.
Complementing any style of decor, the perforated metal grille and discreet moulded baffle
can be painted to blend seamlessly with any environment.
Product Description
• Extended frequency response and very low distortion
• Wide, controlled constant directivity dispersion for
optimum coverage
• Does not suffer from massive loss of energy in the
vertical plane at crossover caused by two way
discrete designs
• UV/weather resistant UL94V-0 ABS construction for
structural integrity
• Dynamic high frequency protection
• Six way self-aligning mounting system
• Ferrofluid cooled neodymium high frequency driver
• Five year warranty
• Foreground music and paging systems
• Multi-room audio systems
• Home theatre
• Business music systems
• Boardrooms and offices
• Retail environments
• Retail outlets and shopping malls
• Lounges and bars
• Cruise ships
• Courtrooms
Features
Applications
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 1
iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
TECHNICAL SPECIFICATIONS
Frequency Response (-3dB) (1) 75Hz - 51kHz
Frequency Range (-10dB) (1) 36Hz - 54kHz
System Sensitivity (1W @1m) (2) 91dB (1W - 2.83V for 8 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 110 degree conical
Directivity Factor (Q) 5.6 averaged 1kHz to 6kHz
Directivity Index (DI) 6.5 averaged 1kHz to 6kHz
Rated Maximum SPL (3)
Average 110.5dB
Average 109dB (with optional THP60 transformer)
Peak 116.5dB
Power Handling
Average 90W
Programme 180W
Peak 360W
Recommended Amplifier Power 180W @ 8 Ohms
Nominal Impedance 8 Ohms
Distortion
10% Full Power (5.5V) 2nd Harmonic 3rd Harmonic
250Hz 2.00% 0.12%
1kHz 0.33% 0.68%
10kHz 0.67% 0.21%
1% Full Power (1.73V) 2nd Harmonic 3rd Harmonic
250Hz 0.57% 0.14%
1kHz 0.08% 0.28%
10kHz 0.27% 0.3%
Crossover 1.8Hz, 16Hz
Notes:(1) Average over stated bandwidth. Measured at 1 metre on axis.(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can bedownloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introductionof new materials or manufacturing methods will always equal or exceed thepublished specifications, which Tannoy reserves the right to alter without priornotice. Please verify the latest specifications when dealing with critical applications.
Dual Concentric™ Point source, constant directivity driver
Low Frequency 1 x 165mm (6.50”)
High Frequency 25mm (1.00”) titanium dome with neodymium
magnet system
Supertweeter™ 25mm (1.00”) titanium dome with neodymium
magnet system
Physical
Construction Baffle UL 94V-0 rated ABS
Grille Aluminum, with weather resistant coating
Back can Zinc plated steel (optional accessory)
Clamping Design Six way, self aligning security toggle clamp system
Connectors Gold plated connectors with spring terminals
Hole Cutout Size 271.50 x 168.50mm (10.70 x 6.63”)
Maximum wall thickness - 25mm (1.00”)
Dimensions
Front baffle 320 x 209 x 104mm (12.60 x 8.23”) (H x W)
Front of baffle to rear 104mm (4.10”)
of magnet assembly
Front of wall to rear 99mm (3.90”)
of magnet assembly
Net Weight 3kg (6lbs 6oz)
Included Accessories Paint mask, cutout template, grille
Optional Accessories Steel back can
Steel back can with THP60 transformer
Plaster (mud) ring
Transformer Taps (optional)
70V 60W / 30W / 15W / 7.5W / OFF & Low Impedence operation
100V 60W / 30W / 15W / OFF & Low Impedence operation
System iw6 TDC Transducers
8000 3760 iw6 TDC White 1
PART NUMBER PACKED QUANTITYCOLOURMODEL NAME
Ordering Information
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 2
iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
PERFORMANCE MEASUREMENTS
q y p
50
60
70
80
90
100
10 100 1000 10000 100000
y
0
5
10
15
20
25
30
35
40
45
1 10 100 1000 10000 100000
50
60
70
80
90
100
10 100 1000 10000 100000
0 deg10 deg20deg30deg40deg
ANECHOIC
FREQUENCY
RESPONSE
IMPEDANCE
OFF AXIS
RESPONSE
1m on-axis frequency response
frequency (Hz)
SP
L,
1W
/1m
(d
B)
frequency (Hz)
Impedance vs frequency
frequency (Hz)
Impedance (
ohm
s)
Level (d
B)
Horizontal off-axis response
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 3
iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
PERFORMANCE MEASUREMENTS
0
30
60
90
120
150
180
210
240
270
300
330
360
100 1000 10000
1
10
100
100 1000 10000
Q
BEAMWIDTH
DIRECTIVITY INDEX
Beamwidth vs Frequency
frequency (Hz)
frequency (Hz)
DI vs Frequency
Q
De
gre
es
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 4
iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
-48
-36
-24
-12
0
0
30
60
90270
300
330
100 Hz
125 Hz
160 Hz
200 Hz
-48
-36
-24
-12
0
0
30
60
90270
300
330
250 Hz
315 Hz
400 Hz
500 Hz
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
630 Hz
800 Hz
1 kHz
1.25 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
4 kHz
5 kHz
6.3 kHz
8 kHz
10 kHz
12.5 kHz
16 kHz
20 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
630 Hz
800 Hz
1 kHz
1.25 kHz
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 5
iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
4 kHz
5 kHz
6.3 kHz
8 kHz
10 kHz
12.5 kHz
16 kHz
20 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
630 Hz
800 Hz
1 kHz
1.25 kHz
100 Hz
125 Hz
160 Hz
200 Hz
250 Hz
315 Hz
400 Hz
500 Hz
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
630 Hz
800 Hz
1 kHz
1.25 kHz
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 6
iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
DIMENSIONAL SKETCHES
251.0
103.8
98.94.9
271.5
209.0
320.0
168.5 iw6 TDC - POST-INSTALLATION
209.0
320.0
98.94.9
103.8
168.5
271.5
337.0
iw6 TDC - PRE-INSTALLATION
320.0mm12.60”
4.9mm3.89”
99.0mm3.90”
271.5mm10.69”
337.0mm13.27”
168.5mm6.63”
iw6 TDC - PRE-INSTALLATION
209.0mm8.25”
320.0mm12.60”
4.9mm3.89”
98.9mm0.19”
103.8mm4.09”
271.5mm10.69”
251.0mm9.88”
168.5mm6.63”
iw6 TDC - POST-INSTALLATION
209.0mm8.23”
104mm4.10”
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 7
INWALL BACK CAN ACCESSORY
Ordering Information
BACK CAN FITTED IN STUD PARTITON BACK CAN FITTED IN STUD PARTITON
STUDSTUD WALL COVERING MATERIALWALL COVERING MATERIALFITTED AFTER BACK CAN HASFITTED AFTER BACK CAN HASBEEN INSTALLED IN POSITION.BEEN INSTALLED IN POSITION.
451.0451.0[17.76"][17.76"]
180.0180.0[7.09"][7.09"]
281.0281.0[11.06"][11.06"]
477.0477.0[18.78"][18.78"]
420.0420.0[16.54"][16.54"]
310.0310.0[12.20"][12.20"]
89.189.1[3.51"][3.51"]
12.5 min12.5 min[0.49"min][0.49"min]
101.6 min101.6 min[4.00"min][4.00"min]
96.796.7[3.81"][3.81"]
TOPTOP
8000 4020 iw6 TDC/DS Back Can Unpainted Steel 1 4.00Kgs (8.80lbs)
8000 4230 iw6 TDC/DS Transformer Back Can Unpainted Steel 1 11.00Kgs (23.1lbs)
8000 4250 Pre-install mounting ring for iw6 TDC/TS - - -
PACKED
WEIGHT
PACKED
QUANTITY
BAFFLE / GRILLE
COLOUR
MODEL NAMEPART NUMBER
Tannoy adopts a policy of continuous improvement and product specification is subject to change
Tannoy United Kingdom T: 00 44 (0) 1236 420199 E: [email protected]
Tannoy Deutschland T: 00 49 (180) 1111 881 E: [email protected]
Tannoy France T: 00 33 (0)1 7036 7473 E: [email protected]
TC|Group Americas T: 00 1 (519) 745 1158 E: [email protected]
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 8
iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
The in wall speaker shall consist of one 165mm (6.50") Dual Concentric™ transducer and one 25mm (1.00”) Supertweter™ mounted in an injection moulded
front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The three-way system shall incorporate an optimised low loss crossover
network. The wiring terminals shall be gold plated spring loaded connectors. Performance of the in wall speaker shall meet or exceed the following criteria:
The system shall have a coverage angle of 110 degrees (1kHz to 6kHz). Frequency response measured on axis shall be 36Hz - 54kHz (-10dB from rated
sensitivity, measured in an IEC baffle in an anechoic chamber) with no equalization. Sensitivity shall be 91dB (1W @ 1m). Long term power handling
capacity as defined in EIA-426B test shall be 90W, recommended amplifier power 180W @ 8 Ohms. The nominal system impedance shall be 8 Ohms.
In 70V or 100V distributed audio systems the iw6 TDC can be used with the optional the THP60 high performance, low insertion loss transformer with 60,
30, 15 and 7.5W taps* available.
A weather resistant perforated steel aluminum covers the transducer. Both the grille and baffle shall be paintable. The system shall not exceed the following
dimensions: 320 x 209 x 104mm or 12.60 x 8.23 x 4.10” (H x W x D).
Hole cutout size shall be 271.50 x 168.50mm or 10.71 x 6.63".
The in wall speaker system shall be the.....iw6 TDC.
*70.7 Volt only
Architectural specifications
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 9
iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
NOTES
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 10
iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 11
iw6 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW6TDC data file issue:1.10 // 05.02.2013
Tannoy Direct (UK) T: 00 44 (0) 1236 420199 E: [email protected]
TCGI (ROW sales) T: 00 45 8742 7000 E: [email protected]
TCGA (Americas sales) T: 00 1 (519) 745 1158 E: [email protected]
Tannoy Middle East T: 00 971 (04) 4401208 E: [email protected]
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 12