Download - Issue 132
Advertising: Tel +61 7 3256 1779 Email: [email protected] 1issuE 132 | 05.07.10 | PAgE
By JIM BOWDEN
SIX prominent industry leaders have been charged with the responsibility of “designing” a single national organisation for Australia’s $23 billion forest and forest products industry.The move for a bold new style of industry unification will be quickened by the signing, excepted soon, of an MOU between the National Association of Forest Industries
and the Australian Plantations Products and Paper Industry Council, with a merger of both organisations likely.Despite all the changes in the past decade, the leadership and representation of the timber industry are as fiercely contested an issue now as they were almost 25 years ago when NAFI was established.“It’s time to split from the past and create a new level of
leadership to build campaigns that win victories for industry – a single voice that will be heard and understood and appreciated through the corridors of power,” a founding member of NAFI said.
The mechanics for the new entity will be driven by:
• Linda Sewell, chair of A3P and chief executive of HVP
single voice
Working to form a national body for all sectors
Bold move on industry unification
Advertising: Tel +61 7 3256 1779 Email: [email protected] issue 132 | 05.07.10 | Page 1
6477
Cont Page 2
Wood WaSte focuSat bioenergy taLkS
thiS iSSue
www.timberawards.com.au
AFS/01-10-01
www.forestrystandard.org.au
Your WEINIG expert at www.weinig.com
WEINIG OFFERS MORE
Everything for solid timber processing. Everything from a single source. We give our 100%!
Linda Sewell Greg McCormack Jim Snelson Vince Erasmus Bryan Tisher Stephen Hawkins
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 132 | 05.07.10 2
Plantations. Ms Sewell joined HVP Plantations after a 10-year tenure at Carter Holt Harvey during which she served as the founding CEO for the company’s laminated veneer lumber products division.• greg Mccormack president of NAFI and owner of Victorian sawmilling firm McCormack Timbers, chairman of forest products and plantation business Midway Pty Ltd and chairman of Drouin West Timber.• Jim Snelson, A3P director and chief executive of Carter Holt Harvey Woodproducts Australia Group. He was formerly CEO of Carter Holt Harvey Packaging Australia.• Vince erasmus, NAFI vice-president and chief executive of Elders Forestry, one of Australia’s largest hardwood forest managers with more than 170,000 ha under plantations. Mr Erasmus has two decades of experience in senior management positions in the South African timber industry.• bryan tisher, NAFI director and executive general manager of Boral Timber. Mr Tisher joined Boral’s construction materials group in 1998 and has been a member of the executive management team since 2000 when he was appointed general manager, corporate development.• Stephen hawkins, A3P director and corporate and government relationship manager at Australian Paper. Mr Hawkins came to Australian Paper from Carter Holt Harvey where he worked as sales and marketing manager.Formation of a single national voice for industry comes at a challenging time for the
forest industry in a struggling global economy. It also clearly highlights the current gap in the industry’s broader representation of activities.A quick look at the make up of industry associations – watchdogs, if you like – since 2000 has seen a dramatic change. Some associations have simply disappeared, TDA South Australia the most recent. There have also been amalgamations – Plantation Timber Association Australia with the paper sector; the merger of panel associations.Some of these have had a positive outcome, but overall there has been a reduction in association personnel of more than 50% and the technical sector has taken the major brunt with a 70%-plus reduction in technical staff.
In that same time, the number of issues being dealt with has increased many fold – ETS, illegal logging, green building council, bushfires, energy efficiency, sustainability, EPR, certification and the growing
unity move comesat challenging timefor timber industry
From Page 1
industry news
At TAbmA we do it All!
How do you employ
apprentices?
We recruitWe trainWe mentorWe provide reportsWe developWe rotate if necessary
forget the drama – call Justin dwyer on (02) 9277 3172 and find out how easy it is for us to do all of itfor you.
www.tabma.com.au
across Australia’sforest and forest
products industry.. since 1940
Makinganimpact ..
Victorian Association ofForest Industries
Level 2, 2 Market StreetMelbourne 3000
Tel: +61 3 9611 9000 Fax: +61 3 9611 9011
Email: [email protected]: www.vafi.org.au
Please join us!
2010 VAFI
AnnualDinner
Friday October 15in Melbourne
Watch this space!More details to
follow soon
Eventual merger? NAFI and A3P.
the new organisation will speak for all sectors of
industry, embracing both hardwood and softwood
operations
Cont Page 4
Advertising: Tel +61 7 3256 1779 Email: [email protected] 3issuE 132 | 05.07.10 | PAgE
RESEARCHERS at Industry & Investment NSW have secured $1.12 million from the federal government’s $5 million forest industries climate change research fundThe division, formed in July last year, embraces the Department of Primary Industries, including Forests NSW.The Minister for Primary Industries Steve Whan said the grant would be used to complete seven projects that would help resource the forestry industry to meet future challenges as a result of climate change.“The projects are all designed to assist the forestry industry better understand what the
implications of climate change will be and allow the industry to adapt to predicted scenarios,” Mr Whan said.“Forests can play an important role in reducing the effects of climate change.“It is critical that we have a clear understanding of how this renewable resource will respond to climate change and how the industry can capitalise on any opportunities.”The research projects I&I NSW will be involved in include the decomposition of forest products in landfills in subtropical and tropical climates; accounting for carbon in harvesting wood products in
a domestic emissions trading scheme; quantifying soil carbon stocks and dynamics following afforestation of agricultural land with Pinus radiata; providing the missing information for decision support systems to mange forests under rising CO2 and global warming and mitigating climate change through the sustainable production and use of forest biomass for commercial scale bioenergy production; conversion of eucalypt forestry waste residues to biofuels; and climate adaption strategies to manage drought risk and mortality in existing and new forest plantations.Climate in primary industries research leader Dr Georgina Kelly said the seven successful projects would cover a broad range of topics to ensure all areas of forest production were covered.“Our research projects will investigate all parts of the carbon cycle from understanding the impacts of forestry on soil carbon, to the impacts of higher CO2 levels and temperature on future forest growth, and drought induced mortality,” Dr Kelly said.
Dr Georgina Kelly .. investigating all parts of the carbon cycle.
industry news
Research helps forestryadapt to climate change
9 September 2010Sofitel Melbourne on Collins
“Australia’s Place in the Changing Global Forest Products Market”
Presented by ForestWorks, the Industry Skills Council for Australia’s Forest, Wood, Paper & Timber Products Industry, supported by Industry.
The 2010 Forest Industries Liaison Dinner: 9 September Regent Theatre on Collins Street, Melbourne
Industry relevant topics including:
•Futureopportunitiesfor globalforestrymarkets includingrenewableenergy
•Certification®ulation ofglobalmarkets
•Ownership&investment inAustralia
•Industryledsolutionsfor asustainableindustry
For information contact: [email protected]
SAVE THEDATE!Seven projects ready for completion
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 132 | 05.07.10 4
shortage of wood.All of these are heaped on down-sized industry associations and the remaining few to staff them, so it’s no wonder major issues are slipping through the cracks.The new organisation will speak for all sectors of industry, embracing both hardwood and softwood operations. It will galvanise efforts to address common issues, both globally and domestically – and, importantly, will be a ‘super body’ in approaches to state and federal governments.To achieve high performance even during times of acute downturn, businesses – no matter the industry – must continually refine their market focus and position, develop distinctive capabilities that can adapt to shifting sources
of competitive advantage and harness innovation to create new markets.The new body will address the Plantations for Australia: 2020 Vision, a strategic partnership between the federal, state and territory governments and the plantation timber growing and processing industries, all
challenged to treble the area of commercial tree crops to around 3 million ha in 10 years.As NAFI president Greg McCormack put it: “We are on the verge of many exciting opportunities, not least driven by growing demand for forest products in Asia. Key challenges include value-adding opportunities, the spread of sustainable forest management certification, and a fight to overcome the current national trade deficit in forest products of almost $2 billion.”He also highlights the importance of the industry engaging more with green groups and governments over the environmental credentials the industry offers the community, including the sustainable use of resources and the absorption of greenhouse gases by growing
trees.
When NAFI was formed in 1986, its main areas of concern were rapidly declining and insecure resource access; a fragmented voice in dealing with governments resulting in a low profile in policy formulation on industry matters; and a public profile that did not reflect the industry’s significant national and local economic impact or its concern with good, long-term forest management and regeneration.
The new, real sustained move towards a genuine single voice will inspire and enthuse industry and help dissolve any discord or division that may have existed – and it will encourage closer engagement by people with a long-term investment, and faith, in wood’s future.
Exciting opportunities .. growing demand for wood in Asia.
From Page 2
industry news
Patented UniPlant™ Technology now Available to all TimTech Customers
Until recently, the patented UniPlant™ technology was licensed exclusivelyto one large New Zealand sawmiller.
Complete UniPlant packages priced from $500,000 (depending on size)
• Very rapid, low uptake treatment cycles. - Boron H1.2 and H3.1 in 3 -4 minutes - Bifenthrin H2F cycle in 3 - 4 minutes - CCA H3.1 cycle in 15 - 20 minutes - LOSP H3.1 cycle in 30 - 60 seconds
• High throughput. The Kawerau UniPlant can treat over 500m3 per day.• Small, environmentally friendly footprint. No expensive bunding.• Fully automatic. Operated by one person.• Negligible dimensional change in timber.
NEW ZEALANDTimTech Chemicals LtdSuite 2, 224 Kepa Road Mission Bay, Auckland 1071.PO Box 87-127, Meadowbank, Auckland 1742, New Zealand.Tel: +64 9 578 0214 Fax: +64 9 578 0216 [email protected]
AUSTRALIATimTech Chemicals Pty Ltd7/12 Discovery Drive, North Lakes, Qld 4509.PO Box 522, North Lakes , Brisbane Qld 4509, Australia.Tel:+61 7 3480 5802 Fax:+61 7 3491 7983 [email protected]
This license is now non exclusive, meaning that UniPlant’s can be supplied to alltimber treaters on both sides of the Tasman.
www.timtech.info
Patented UniPlant™ Technology now Available to all TimTech Customers
The cost effective benefits of the UniPlant™:
- CCA H3.2 cycle in 15 - 20 minutes- LOSP H3.1 cycle in 1 -2 minutes
‘We are on the verge of many exciting opportunities .. driven by growing demand for forest products in Asia’
Advertising: Tel +61 7 3256 1779 Email: [email protected] 5issuE 132 | 05.07.10 | PAgE
20
10
JuLy 201014: Seminar – fair competition and the illegal Logging trade. Speaker: Juel Briggs, Briggs Veneer. Prosperos Restaurant, 310 Church Street, Parramatta, 6,30pm for 7pm. Hosted by Sydney Hoo-Hoo Club 215. Contact: Chris White on 0411 293 646 or Ian Ramsay on 0414 746992. Email: [email protected]
14-18: interforest 2010 trade fair for forestry technology Munich, Germany. www.interfrost.de
21-22: Wood energy 2010 - reducing energy costs and improving energy efficiencies. Rotorua, NZ.
21-22: Scantech 2010 Sawmill Scanning & Optimisation Technologies. Rotorua, NZ. www.scantechevents.com
26-27: Scantech 2010 Sawmill Scanning & Optimisation Technologies. Melbourne. www.scantechevents.com
26-27: Wood energy 2010 (World reducing energy costs & improving energy efficiencies) Melbourne.
26-29: combined workshop. ATTA / FIAPS / ForestWorks combined annual workshop Hobart. Details: www.atta.org.au
SePteMber 20103-5: canberra timber & Working With Wood expo, Exhibition Park in Canberra. Contact: (02) 9974 1393. Fax: (02)9974 3426 Email: [email protected]
6-12: Landcare Week. www.landcareonline.com
7: WoodSolutions 2010. Program for architects, engineers and specifiers. Dockside, Darling
events
WHAT’S ON?
National Association ofForest Industries Ltd
(Est. 1987)PO Box 239,
Deakin ACT 2600Tel: (02) 6285 3833.Fax: (02) 6285 3855
Web: www.nafi.com.au
SUSTAINABLE.RESPONSIBLE.
The NationalAssociation of Forest
Industries (NAFI)is striving for an
ecologically sustainableAustralian societyachieved through
dynamic,internationally
competitive forestindustries.
NAFI’s mission is torepresent the interests
of members bypromoting theenvironmental
sustainability andthe prosperity ofAustralian forest
industries.
sustainable.responsible.
The National Association of
Forest Industries (NAFI) represents
Australian companies, individuals and
organisations involved in the forestry and
forest products industries.
the national association of forest industries Ltd
(EST.1987)PO Box 239,
Deakin, ACT 2600Tel: (02) 6285 3833Fax: (02) 6285 3855
Web: www.nafi.com.au
NAFI works with state and federal governments to
support the interests of its members while at the same
time improving industry standards and practices,
promoting sustainable forestry management and
educating the broader community on the
economic, environment and social benefits of a strong sustainable
forest industry.
Harbour, Sydney. Register interest at www.woodsolutions2010.com.au
7-9: Wood Manufacturing 2010. Rotorua, NZ. Designed for wood processing operations in the dry mill and stand-alone wood manufacturing companies. View: www.woodmanufacturingevents.com
8-10: afac bushfire crc annual conference. Darwin Convention Centre Australia. www.afac10.org
9: Wood Solutions 2010 program. Melbourne Convention and Exhibition Centre. Register interest at www.woodsolutions2010.com.au
9: australia’s Place in the changing global forest Products Market. Future opportunities for global forestry markets including renewable energy; certification and regulation of global markets; ownership and investment in Australia; industry-led solutions for a sustainable industry. Presented by ForestWorks, Sofitel Melbourne on Collins. Note: Forest industries liaison dinner in the evening at the Regent Theatre on Collins Street. For information contact: [email protected]
13-15: Manufacturing 2010. Melbourne. Designed for wood processing operations in the dry mill and stand-alone wood manufacturing companies. View: www.woodmanufacturingevents.com
15: WoodSolutions 2010 program. State Library of Queensland, Brisbane. Register interest at www.woodsolutions2010.com.au
15-16: Wood Manufacturing 2010 Profitable Wood Manufacturing - Tooling Technology & Design, Melbourne.
20-21: Wood Manufacturing 2010 Profitable Wood Manufacturing - tooling technology & design Rotorua, NZ.
30-2 october: the future of forestry and forest Science conference. Celebrating the centenary of forestry education in Australia. Sydney Myer Asia Centre Carrillo Gantner Theatre, Melbourne University. Contact: Event Planners Australia forestry.
Email: [email protected]
october 201010-13: australian forest growers national conference, Mount Gambier, SA. Chief executive Warwick Ragg. Contact national office: (02) 6162 9000.
15-17: Melbourne timber and Working with Wood expo, Melbourne Showground, Melbourne. Contact: (02) 9974 1393. Fax: (02)9974 3426 Email: [email protected]
19-20: Mtc global Woodmart: gateway to international Wood Markets. The first ‘one-stop’ selling and buying platform for all suppliers and buyers of wood and wood products. Early bird discount 5%. Organised by the Malaysian Timber Council at the Kuala Lumpur Convention Centre, Malaysia. Contact: Malaysian Timber Council. Tel: +60 3 9281 1999. Fax: +60 3 9289 8999. Email: [email protected] Web: www.globalwoodmart.my
29: tabMa annual dinner. Luna Park, Sydney. Incorporating the Australian Timber Design Awards presented by TDA NSW. Dinner supported by TDA, NSW Forest Products Association and FWPA. Contact: TABMA on (02) 9277 3172.
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 132 | 05.07.10 6
By JIM BOWDEN
SAWMILLERS attending Timber Queensland’s bioenergy seminar in Brisbane last week agreed industry must “tune in” to emerging technologies to reduce power costs using wood waste or “suffer the consequences”.Timber Queensland has long held an interest in opportunities for using waste products in the form of sawmill residue for renewable energy production. New technologies in the energy sector have highlighted the potential for plantations to supply biomass for energy production, without impacting on primary wood production.More than 50 delegates represented a diverse range of interests – sawmilling, wood processing, government forestry, producer organisations, timber merchants, sugar milling, tree growing, universities, and energy consultants – at the seminar on July 1.High profile speakers included Dr Stephen Schuck, manager, Bioenergy Australia, Greg Nielsen, director, Queensland Office of Clean Energy, Matthew Warnken, director, Crucible Carbon, and Terry
McConnell, business and industry relationship manager, Energex.In a recent statement, federal Coalition spokesman for forestry Senator Richard Colbeck estimated wood waste could provide as much as 7% of Australia’s current 2020 renewable energy target.“In addition, it could generate an estimated $800 million in direct investment and create 2300 jobs, many of which would be in rural and regional communities.”He said a timber manufacturing plant on the NSW central coast was using coal energy for its operations, but given incentives, it could reduce this fossil fuel energy use by 75% by replacing it with wood waste.“Not one extra, tree, log, twig or leaf would be cut down over and above current sustainable production to make this fossil fuel reduction,” Senator Colbeck said.Sean Gribble, general manager of N.K. Collins Industries, Toowoomba, which operates six cypress and hardwood sawmills across western
industry news
Cont Page 11
industry must pushahead on bioenergySeminar spurs new interest
Getting together in Brisbane .. Nick Roberts, chief executive, Forests NSW, Sydney, Spiro Notaras, managing director, J. Hotaras & Sons, Grafton, NSW, and Russel Ainley, executive director, NSW Forest Products Association, Sydney.
Advertising: Tel +61 7 3256 1779 Email: [email protected] 7issuE 132 | 05.07.10 | PAgE
AFTER more than two years of negotiations, the European Council and European Parliament have signed a provisional agreement that, if approved, would ban illegal timber from entering the EU.Finnish MEP Satu Hassi, who succeeded British MEP Caroline Lucas as the rapporteur for the regulation, called the proposed prohibition “an important precedent for taking responsibility for the external impacts of European consumption.”European Parliament will vote on the provisional agreement on July 7. If approved, it would then fall to the council to formally adopt the text.Legal timber is defined as timber that was “harvested in accordance with the relevant national legislation”, along with adhering to “relevant international conventions to which that country is party”, according to the text of the agreement.Brussels estimates that 20 to 40% of global industrial wood production is obtained illegally; up to one fifth of all of that illegal wood ends up in the EU.The compromise between the EU Council and the Parliament
contains two key provisions: the prohibition against bringing illegally logged timber into the European market and the obligation that timber and timber products be traceable throughout the supply chain.The agreement also puts into place a ‘due diligence’ system that requires the operators who introduce the timber into the EU market to show that they have done everything possible to ensure that the timber comes from legal sources. This includes gathering all ‘relevant’ information about the timber’s supply and source, conducting risk assessments based on that information, and then attempting to mitigate those
risks.The requirements for subsequent operators retailing in the EU market are less stringent. They are required to know where they bought the timber and to whom they sold it; they must also be able to present that information upon request.Though pleased with the agreement’s progress, Satu Hassi expressed disappointment that member states “could not move closer to the Parliament’s position”.Originally, the council did not support the prohibition or the traceability obligation for subsequent actors, while
Parliament wanted full-scale prohibition that would cover the subsequent operators after the first place on the market. These two requirements are, arguably, the key tenets of the legislation, and did finally make it into the final compromise text.Parliament also pushed for the regulation to cover a broader range of products, and for the most severe cases of illegal timber trade to be punishable by criminal sanctions. However, that request did not make it into the final agreement.The issue of illegal timber imports will be examined at a seminar in Sydney on July 14.“We have had RSVPs from numerous people including some from interstate and others representing different organisations,” says Chris White, president of Sydney Hoo-Hoo Club 215, which has arranged the event.“They are keen to learn more about the potential job losses in our industry if unfair government policy or regulations on illegally logged timber imports are introduced without the same regulations applying to imported timber furniture and other products.”
Satu Hassi .. EU ban important precedent.
Juel Briggs .. addressing Sydney seminar.
industry news
Eu moves toward illegal timber ban
Cont Page 8
Importers press for ruling at Sydney seminar
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 132 | 05.07.10 8
Speakers, including Juel Briggs, a director of Briggs Veneers, will press for the government to ensure fair competition for Australian timber merchants, joiners and furniture and kitchen manufacturers.
Simply applying controls to imports of timber raw material while not applying such controls to imports of overseas made furniture, pre-fabricated fit-outs and kitchens, is handing a strong competitive advantage to overseas manufacturers,
they say.
Apart from this matter of fair competition, if the government just controlled timber imports (without considering furniture imports), they would be ignoring the main source of illegal timber imports.
Research indicates two to three times as much illegal timber is contained in imported furniture, components and finished products compared to what comes in as timber and panels. The seminar will be held at: Prosperos Restaurant, 310 Church Street, Parramatta, starting at 6.30pm. Cost: $40 p.p. (members); $44 p.p. (non members). RSVP by Monday, July 12, to Chris White on 0411 293 646 or Ian Ramsay on 0414 746992 or email: [email protected]
industry news
Visit: www.osmose.com.au or phone: 1800 088 809Osmose® and MicroPro® are registered trademarks of Osmose, Inc. or its subsidiaries. A Better Earth Idea from Osmose sm and Treated Wood Just Got Greener sm are slogan marks of Osmose
Inc and its subsidiaries. GREENGUARD® is a registered trademark of GREENGUARD Environmental Institute. MicroPro timber products are produced by independently owned and operated wood preserving facilities.
Tre
ated
Wood Just Got G
reenersm
looks different,because it is different!
MicroPro®
Copper Quat
NOW AVAILABLE IN AUSTRALIA!
Eu introduces ‘due diligence’ systemFrom Page 7
AUSTRALIA has increased woodchip exports of both eucalyptus and pine in 2010, reports the Wood Resource Quarterly
Total wood chip exports fell 32% in 2009 to their lowest levels in 10 years. Softwood chip shipments were down by almost 26% from 2008, reaching a low of 790,000 tonnes last year, says the report.
But export volumes have picked up this year p and shipping schedules for the coming months would indicate that the shipments in the first half of 2010 will be substantially higher than last year and could very well be back to almost the same levels as the average for the past five years.
A new development is the interest in the exportation of wood pellets with one company taking steps to ship wood pellets to the fast expanding biomass energy market in Europe. The first shipments departed in late 2009 for an energy company in the Netherlands, and 20,000 tonnes has been shipped to Europe so far this year. The three-year contract totals an estimated 300,000 tonnes of pellets.
Australia increasesexport of woodchips
Advertising: Tel +61 7 3256 1779 Email: [email protected] 9issuE 132 | 05.07.10 | PAgE
BAMBOO is winning a lot of accolades in the green building and construction sector. It’s renewable, has natural antibiotic properties, and is biodegradable. And it takes only three years for bamboo to reach maturity.Manufacturers are promoting its strength and durability. But the popular carbonised darker bamboos are neither tough nor hard and are comparable to the soft hardwood black walnut and maple.Now Cali Bamboo, based in San Diego, California, has introduced lumboo into the US market “as the first engineered dimensional ‘lumber’ made from bamboo”. A product of China, it is manufactured by gluing strips of bamboo together into a block, using a low VOC resin.The blocks are milled into 1×4, 2×4, 2×6, and 4×4 products, although due to the strength of the product, the actual sizes are much smaller than their nominal sizes.Cali Bamboo is hoping to expand to framing and decking in the near future, especially if they can bring the price down. Although it is also touted as termite resistant, the product does not have testing data to support that claim.The company is also producing
plywood from 4-6 year-old organically grown FSC certified moso bamboo. Rectangular strips are cut from the bamboo and then boiled to remove sugars. Cali Bamboo claims that after treatment and drying to a moisture content of 6-9%, the strips are compressed using E1-level adhesives.Bamboo is a group of perennial evergreens in the true grass family Poaceae. It has economic and cultural significance in east Asia and southeast Asia where the stems are used extensively in everyday life as building materials and as a highly versatile raw product.
timber & forestry e-news is the most authoritative and quickest deliverer of news and special features to the forest and forest products industries in australia, new Zealand and the asia-Pacific region. Weekly distribution is over 6,400 copies, delivered every Monday. advertising rates are the most competitive of any industry magazine in the region. timber&forestry e-news hits your target market – every week, every Monday!
HEAD OFFICEcustom Publishing group
unit 2- 3986 Pacific highwayLoganholme 4129 Qld, australia
PUBLISHERdennis Macready
CONSULTING EDITORJim bowden
tel: +61 7 3256 1779Mob: 0401 312 087
ADVERTISINGtel: +61 7 3256 1779
PRODUCTION MANAGERLeigh Macready
tel: +61 7 3841 [email protected]
opinions expressed on timber & forestry e news are not necessarily the opinions of the editor, publisher or staff. We do not accept responsibility for any damage resulting from inaccuracies in editorial or advertising. the Publisher is therefore indemnified against all actions, suits, claims or damages resulting from content on this e news. content cannot be reproduced without the prior consent of the Publisher- custom Publishing group.
markets
grass is greenerfor China’s new
structural lumboothe
Watchdog
Lumboo .. Asia’s new structural engineered ‘lumber’ made from bamboo and now distributed in the US.
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 132 | 05.07.10 10
LEARNING and skills developer ForestWorks has launched a five-step process guide to accessing apprenticeships and traineeships, which includes resources and helpful tips to streamline the process.The Flexible Apprenticeship and Traineeship Workplace Guide released to industry in June, follows development over 18 months in consultation with industry. Funding will be through the Department of Education, Employment and Workplace Relations (DEEWR).The guide promotes Australian apprenticeships and demonstrates flexible trainee and apprenticeship delivery approaches.User friendly, the guide centres around five key steps to gaining a qualification. By following these steps, users will learn more about registered training organisations (RTOs) as they gain a qualification.The guide is also a useful resource for those unfamiliar with the terminology of the vocational education training sector and provides relevant contact details.It includes a case study involving Timber Training Creswick and Dahlsens Building Centres where flexible training has been
introduced to meet the hectic demands of a busy worksite.Timber Training Creswick has developed a flexible training model to meet the needs of its client which has lead to success in many areas of the business, including increased sales, reduction in lost time injuries and reduced staff turnover.Brian DeClase, manager of the Dahlsens’ Ballarat frame and truss plant, says he is proud of what the site has achieved and accredits it to training.Since the flexible training plan was introduced, Mr DeClase has documented a marked
increase in profit as well as a drop in lost work time.A reduction of lost time injuries has seen work cover costs reduced more than 90%, an increased awareness, identification and rectification of hazards and employees encouraged, where possible, to re-enter the workplace on revised duties.Sales at the site have increased by 64% with minimal increase in staffing levels, increased resource output and reduced costs through improved lean manufacturing processes.Mr DeClase said there had been
a noticeable reduction in staff absenteeism. “Staff feel valued by receiving and responding to feedback via a 12 monthly employment review process and opportunities to identify workplace training needs,” he said.A hard copy of the guide will be available to members and stakeholders soon. Inquires should be directed to Damian Toohey at [email protected] pdf version of the guide can be downloaded from www. forestworks.com.au
industry traininG
Trusted brokers to the timber industry since 1985Be SURE about INSURANCE
Contact Alan JonesTel: (07) 3010 1823 Mob: 0419 754 681 Email: [email protected]
(Licence No. 238123)
ForestWorks helps streamline apprenticeship processguide delivers the goods on training
Minn Stewart, material support officer, ForestWorks, and Damian Toohey, manager, Industry Skills Advisory Service (Forestry) Victoria, look over the Flexible Apprenticeship and Traineeship Workplace Guide at ForestWorks office in Melbourne. Global surge in
wood pellet fuelGLOBAL production of wood pellets, an alternative fuel for heating, will grow by multiples over the next decade, helped by the European Union’s renewable energy regulations, an industry lobby group says.Production will increase to 100 million tonnes from about 12 million tonnes now, Christian Rakos, head of the association of Austrian pellet producers, said in Brussels.Much of the increase will come from Canada and the southern USA.
Advertising: Tel +61 7 3256 1779 Email: [email protected] 11issuE 132 | 05.07.10 | PAgE
Queensland, reflected the opinion of many delegates: “The seminar put us firmly back on track; we have to embrace new bioenergy technologies or ignore them at our peril.”He said a 14% blow-out of power costs was making the sawmilling game very trough.“In our case, with six sawmills spread over a wide area of the state, plus our processing plant at Toowoomba, this represents a tremendous cost burden,” Mr Gribble said.“We need to assess all the processes available, but at the end of the day it’s all about utilising mill waste and fall down and forest residue – and coming up with the best and most economical process to achieve the best returns.”
Mr Gribble said N.K. Collins was sure about embracing new bionergy technology .. ‘we’re doing our homework,” he said.“But the energy business needs to consider the logistics of the timber industry. I’m sure a lot of them don’t understand the distances we must cover to transport wood waste.”N.K. Collins has a mill at Mitchell on the western downs, about 590 km from Brisbane, another at Mungallala 50 km away, one at Augathella another 150 km away, and the Tambo sawmill which is yet another 150 km away.“With so many sites it’s a logistic nightmare to relocate the forest residue and or mill waste and it’s a considerable contributor to costs. These are some of the things the bioenergy promoters must come to grips with if we
are to move forward.“But one thing’s for sure – if we turn a blind eye to this new technology, it will surely come back and bite us.”N.K Collins Industries is a family concern operating for more than 40 years and employs 210 staff, with 70 employees at the Toowoomba head office.A $3 million-plus expansion plan over the past 18 months, including a new wall frame and truss plant, shows the company’s commitment to the cypress industry.The Toowoomba processing plant has the largest modern kiln drying plant, high speed planing machines, sizing and proof grading equipment, automatic fault line dockers and a state-of-the-art automatic end-matcher.In 1990 the company diversified
part of its operations into the export market and exports about 30 containers a year to the US, New Zealand, Brazil, Japan and southeast Asia.Mr Gribble said the US and Japanese markets were expanding rapidly due to the unique properties of cypress as a durability class 1 termite resistant product.Visadamax and GS Energy were strong supporters of the seminar.• More reports on the seminar in future issues of t&f enews.
industry news
www.timberawards.com.auENTRY FORMS AND INFO AVAILABLE AT
If it’s your timber, make sure it’s in the competition.Ring the architect, builder or owner; pay the fee;
organise the photos.
The 2010 Australian Timber Design Awards is your chance to have your
timber products showcased. If you’ve supplied timber or timber products to an
eye-catching house, office block or resort development, make sure your contact
knows about the Timber Design Awards. Let us know about the project by email at
Entries close 16 July
‘At the end of the day it’s about utilising mill waste’
Dr Graeme Palmer, research scientist, Southern Cross University, Lismore, and Graham Hughes, environmental compliance manger, Dale and Meyers, Maryborough, Qld.
From Page 6
Tim Evans, Australian representative, Visdamax, and Mark Annandale, director, Environment Land Heritage.
Matthew Croft, resource manager, Boral Plywood, Ipswich, and Greg and Paul Jackson of Palletmasters, Redcliffe.
EdiTorial inquiriEs
ph: +61 7 3256 1779
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 132 | 05.07.10 12
PLANNING for next year’s Forest
Industries Expo has stepped up
a notch with bookings opening
on July 1.
Held every four years, the expo
– or FI2011 – will be held in
Rotorua from September 5 to 7
next year, making the most of
the 2011 Rugby World Cup in
New Zealand.
The expo will also be part of
a national Forestry and Wood
Industries Festival, with a
number of other events planned
to complement the expo during
the build-up to Rugby World
Cup.
Event organiser Dell Bawden
says members of the forestry industry from around the world will gather in Rotorua for FI2011.“The Rugby World Cup provides us with the opportunity to showcase our forestry sector on a global stage, and the expo is an important part of that,” Ms Bawden said.The New Zealand Forestry and Wood Processing Festival will be the single biggest opportunity for the forestry industry to demonstrate its expertise, technology and products, and to reach new markets and grow the sector.Ms Bawden said the expo would cover every aspect of the forestry industries sector from plant to market, and everything from genetics and growing, to harvesting, processing, design, manufacturing, technology workshops and links to domestic and international markets.Traditionally held at the Rotorua Racecourse, this is the first time FI2011 will be held at Rotorua’s new Energy Events Centre.The newly finished events centre is purpose-built, which will better accommodate both exhibits and heavy machinery alike. Heavy machinery such as the latest logging gear, trucks and sawmilling equipment will have plenty of room in the car park area and the Government Gardens Golf Driving range which is right next door.Ms Bawden already reports strong interest from exhibitors.“There are only a handful of specific, dedicated global forestry exhibitions and FI2011 attracts exhibitors and visitors from around the world,” she said.Contact Dell Bawden on +64 7 362 7865.or visit www.forestevents.co.nz
NZ kicks goals with biggest showcaseindustry news
GUARANTEEDEngineered Wood Products Association of Australasia
Email: [email protected] Web: www.ewp.asn.au
A matter of trust.
Made in New Zealand – keeping jobs at homeReliable supplyNZ Building Code compliant – 50-year durability for structural plywood with an A-bondAll products specify EO or E1 emissions certified under JAS-ANZAll products must pass rigorous testing$10 million product liability insuranceFree technical advice from qualified engineers
4
4
4
4
4
4
4
New Zealand engineered wood products – particleboard, MDF, laminated veneer lumber and plywood – manufactured by member mills of the Engineered Wood Products Association of Australasia .. they tick all the boxes
You get what you pay for.
You pay for what you get.
Don’t risk it. Trust the home product.
Credentials of NZ wood are unbeatable.Imported wood doesn’t make the cut!
Advertising: Tel +61 7 3256 1779 Email: [email protected] 13issuE 132 | 05.07.10 | PAgE
PRIVATE New Zealand forest industry consultant Forme is planning a major joint venture with Chinese manufacturer Tianjin Sunwin to process wood into eco-friendly, high quality components for the European building industry.Both companies plan to use a new environmentally safe wood modification process to modify plantation radiata into products suitable for substitution of threatened species.The processing will be done at a factory the companies propose to build near the giant and rapidly-developing port of Tianjin, near Beijing.About 100,000 cub m of high grade pruned logs would be primary processed in New Zealand and shipped for further processing in Tianjin.This export project is made easier by the free trade agreement between New Zealand and China.An application for official consent will be made in Tianjin to build the wood modification factory on about 80 ha of land that forms just part of the vast, 30 sq km Dongjiang Tianjin port, the world’s fifth-largest.
The wood modification plant will be the centre point of a wood processing ‘cluster village’ where locals would be employed to develop the treated wood into the components required by the building industry in Europe.The modified wood will be used by the high value sector of the European building industry to replace tropical African hardwoods, which have been restricted by several European processors to help prevent the deforestation of tropical rainforests.In contrast, New Zealand-grown radiata is a quick-growing, sustainable and renewable resource which is grown in commercial plantations. It is recognised as the most suitable species for the wood modification process.High grade radiata pine logs will be sawn and kiln-dried in New Zealand before being shipped to the new wood modification factory in Tianjin.China’s building industry is also a market for the modified radiata pine. Planned start-up date for the joint venture is late 2012.
industry news
NZ-China venturetargets Europe forbuilding productsRadiata components for export
Wood modification joint venture in China will develop and assemble treated building components for the European market.
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 132 | 05.07.10 14
THE SmartWood program of Rainforest Alliance has notified stakeholders that it will be undertaking a pre-assessment of Gunns Ltd forests this month.This will provide the company with an analysis of its conformance with the FSC principles and criteria for responsible forest management
and the FSC standard for forest management enterprises supplying controlled woodThe pre-assessment will assess compliance using the SmartWood Interim standard for Australia and will examine environment, social, silvicultural and economic aspects of forest management operations. The scope of the assessment
is about 429,250 ha in Western Australia, South Australia, Tasmania and Victoria, including 316,000 ha of plantations (E. nitens, E.globulus and Pinus radiata) and the balance natural forests (productive, non-productive and reserved). The pre-assessment will be undertaken by an international team of auditors. Stakeholders
are invited to offer comment and feedback on Gunns’ forest management in writing or in person with the audit team. Smartwood will treat as confidential any information provided.The audit team will be visiting sites from July 12 to 16. Audit team leader Graham Lea can be contacted on 042 972 0013.
THE concept is simple and the feedback and input to the design of the new wood technology show and expo from across Australasia has been outstanding. Wood Manufacturing 2010 in Rotorua, NZ, and Melbourne in September has been set up by the Forest Industry Engineering Association (FIEA) to cover all wood processing and manufacturing operations in the dry mill or stand-alone wood manufacturing operations.“Instead of running 2-3 yearly technology updates we’ve been working closely with key technology providers from around the world and local wood producers to run one single event – at one time and under one roof,” says FIEA director Brent Apthorp.
“The objective with this new format is to ensure a wide cross section of staff from any wood manufacturing company can come through to either Melbourne or Rotorua. The way the two-day program has been designed, there’ll be more than enough for managers and production staff to pick up new
technologies that can be used to improve their efficiencies – in each part of the company’s operation.”Wood Manufacturing 2010 will include practical workshops (many running concurrently so delegates can pick and choose the topics relevant to their own particular role within the company), managed exhibitions, demonstrations and displays. The coverage in two days is extensive and will include the very latest on wood manufacturing layout and design; scanning technologies in the dry-mill; timber cross cutting and ripping; finger jointing; kiln drying operations; timber gluing and laminating; wood finishing (sanding, pre-priming and painting); production moulding, and timber machining. Because of the interest by local
companies in the new show, and length of time since the last FIEA wood manufacturing event was held, the September show has attracted an even wider range of major technology providers to this part of the world. In addition to local companies – product suppliers and wood manufacturers – technology providers from Canada, Sweden, Denmark, Norway, Germany, Austria and South Africa will be participating. Many will also be linking in visits at the front and back end of each event to visit key customers. “Automation, higher production speeds, optimisation technologies, material handling systems and case studies on how successful wood manufacturing operations (in Australasia, North America and Europe) have adopted and are using the new technology
will be the principal focus for this new program”, says Brent Apthorp. “In addition to a large expo displaying new products and services in both Australia and New Zealand, major industry associations A3P, FWPA, the NZ Pine Manufacturers Association, NZ Timber Machinists Educational Association, the Glue Laminated Timber Association of Australia and the Australasian Timber Drying Group have linked in to support the event. Many have also arranged to hold their own meetings in and around the programme for their member companies.”Wood Manufacturing 2010 runs in New Zealand from September 7 to 9 and again in Australia from September 13 to 15.
Brent Apthorp .. case studies will show how industry has adapted to new technology.
Modern finger-jointing technology features in wood manufacturing showcase in Melbourne and Rotorua.
wood technoloGy
global approach to Wood Expo 2010Technology updates in Rotorua and Melbourne
event covers all wood processing and
manufacturing operations in the dry mill or stand-
alone wood manufacturing operations
FSC pre-assessment of Gunns forest management
Advertising: Tel +61 7 3256 1779 Email: [email protected] 15issuE 132 | 05.07.10 | PAgE
bioenerGy brisbane
Nick Roberts, chief executive, Forests NSW, Sydney and Ian Brown, director, planted forests, Forests NSW.
Tony Johnston, sales and distribution manager, Forests NSW, with Ray Ferdinand, managing director, and Keith Ferdinand, director, of GS Energy, Brisbane. Greg Nielsen, assistant director-general, Queensland Office of
Clean Energy, Rohan Allen, principal industry development officer, forest plantations, Queensland Department of Employment, Economic Development and Innovation (DEET), and Michael Burke, principal policy officer, plant industries, DEET.
Rod McInnes, chief executive, Timber Queensland, and Dr Jorge Beltramini, senior research fellow, University of Queensland.
Peter Laksa and Brad Carswell, aborists with Pioneer Corporation Pty Ltd.
Spiro Notaras, managing director, J. Notaras & Sons, Grafton, NSW, and Tony Johnston, Forests NSW.
Bruce Harle, general manager, ForestWorks, Brisbane, and Dr Stephen Schuck, manager, Bioenergy Australia, Sydney.
Clarissa Brandt, communications manager, Timber Queensland, with Alan Alt, managing director, Austicks, Gladstone, and Damien Herd, managing director, People Planet Profit, Brisbane.
Jim Burgess, forest resource manger, Timber Queensland (right) welcomes Cypress Supplies Caboolture representatives Ray Collins and John Jeffrey.
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 132 | 05.07.10 16
CHILE’S wood pulp industry is on a rebound just four months after a massive 8.8-magnitude earthquake struck at the industry’s centre, severely damaging production facilities and halting production for nearly a month.The majority of the country’s pulp mills are located in south-central Chile, the epicentre of the massive February 27 earthquake that devastated the region. That and the subsequent tsunami paralyzed the industry, shutting down all plants, damaging employees’
homes and cutting electrical power.As a result, Empresas CMPC SA, one of Chile’s two main pulp producers, reported first-quarter net losses of $50 million, along with a production loss of 260,000 tonnes of pulp.The other main producer, Celulosa Arauco y Constitucion SA, a subsidiary of fuel and forestry conglomerate Empresas Copec SA, has yet to report the cost of damages, but a production unit responsible for 18% of its output, or 500,000 tonnes, still remains offline and
is expected to operate again later this year.Yet the pulp industry in Chile, one of the biggest producers of wood pulp in the world, now is nearly back to full capacity, says a report from Dow Jones’ news wire.CMPC and Arauco have nearly all production lines back online – with the exception of one of Arauco’s units – leaving CMPC operating at 100% and Arauco at 84% as of mid-June.The Chilean pulp industry was quick to resume its role as producer of 8% of the global
market’s pulp, with the first plants opening less than a month after the quake.Despite the severe damages caused by the quake, CMPC and Arauco posted higher sales in the first quarter of 2010 than in the comparative 2009 period as a result of historically high pulp prices.Arauco saw consolidated sales of $US784.9 million in the first quarter of 2010, an 18.9% increase from 2009 first-quarter sales. Arauco has yet to release the cost of damages to its assets and operating sales.
FORESTRY Tasmania and the Tasmanian Ports Corporation (Tasports) have reached an agreement to move the fumigation of whole pine logs bound for China from Burnie Port to an anchorage about two nautical miles offshore.Work to investigate the feasibility of moving the fumigation offshore intensified after TasPorts representatives and Forestry Tasmania’s general manager of operations Paul Smith met the Burnie City Council.“In summary, we were reassured by the council’s support for Forestry Tasmania, forest contractors and TasPorts, but also understood concern that the fumigation issue could damage efforts to change perceptions about Burnie and its industrial past,” Mr Smith said.“There was general agreement that much of the community concern was based on perception rather than fact, but nevertheless those concerns could damage Burnie’s brand.”Forestry Tasmania and TasPorts had been examining a range of alternatives before the meeting,
but intensified efforts when the basis of the council’s concerns were understood.“It’s a relief to be able to finally settle on a solution that will satisfy most reasonable people,” Mr Smith said.The ship ID Black Sea is now scheduled to arrive at Burnie Port between the July 9 and 11 after first visiting Bell Bay. Once loaded, it will move to an anchorage north east of the Burnie breakwater for fumigation.
Given the level of concern, justified or not, FT will in future avoid requiring in-hold methyl bromide fumigation of ships at berth.“Exports are important to the economy and to keeping forest contractors in work. We will now work strenuously to either identify new markets, or new ways to export, where in-hold fumigation is not required,” Mr Smith said.
Pine logs for China loaded at the Port of Burnie will now be fumigated offshore.
industry news
Solution found to concerns over pine logs fumigation
BILLED as one of the biggest industry events in New South Wales, the TABMA Australia annual dinner at Sydney’s Luna Park on October 29 is already confirming bookings from three states.The dinner, expected to attract more than 350 guests, will incorporate the Australian Timber Design Awards presented by TDA NSW.The dinner has the support of eight sponsors including TDA, the NSW Forest Products Association and Forest and Wood Products Australia.Vince Sorrenti, one of Australia’s best known and leading comic entertainers will be master of ceremonies at the dinner which features a top band, entertainment and fine food.Official invitations will be posted in late August.Further information is available from the TABMA offices in Sydney. Tel: (02) 9277 3172
gala TABMA dinner
Chilean wood pulp industry shakes offFebruary’s huge earthquake devastation
Advertising: Tel +61 7 3256 1779 Email: [email protected] 17issuE 132 | 05.07.10 | PAgE
An assessment of the standing timber, product range and approximate value was undertaken on the western portion 107 LX 2421 in March last year.
In preparation for the assessment, aerial photos were procured, the regional ecosystems overlayed, proposed strip lines considered and their GPS points down loaded to gain a representative sample of various forest types.
Data collected includes species, diameter at breast height (cm), potential product and its length, and whether the tree would be harvested, retained or chemically treated.
Management units were identified and mapped by assessing the consistency of the forest in relation to species mix and productivity. The strip data was then extrapolated to give a per hectare figure of available volume and extrapolated over the unit area.
Professional report indicates value of timber at $307,000 as at February 09, rising to $788,000 in 8-9 years.
All inquiries and requests for detailed assessment data and aerial photographs should be directed to:
Located Jimna area – Queensland
Area: 243.5 hectares. Elevation 600 metres Normal rainfall 45 in.
Top pole production country with high quality iron bark, grey gum and hoop pine.
Sunday Creek Rd to Kenilworth on southern boundary.
Eastern and western boundaries are Conondale National Park.
Bitumen road frontage. Permanent flow in Six Mile Creek. Great views. Power on property.
FOR SALEMagnificent timber block
$880,000
Richard Long – Rent-A-Stand Pty Ltd, PO Box 37 Greenslopes 4120 Brisbane, Qld, Australia
Tel: +617 33241288 Fax: +617 33970914. Mob: 0408 884 979Email: [email protected]
Classifieds
Tuesday, June 8th 2010
Tender of Harvest and Haulage Contracts VicForests is calling for tenders from suitably qualified harvest and haulage contractors.
Ross Runnalls, VicForests’ Manager, Forest Contracting, said tenders need to be submitted to VicForests by Friday, July 30th 2010 “Three harvest and three transport contracts are being offered by VicForests,” Mr Runnalls said.
“These contracts will cover the annual harvest and transport of approximately 80,000m3 of log product from native hardwood forests in the Central Highlands region.
“Two five-year contracts and one one-year contract for both harvest and haulage will commence in October 2010 with a nine-month annual operating period.
“These contracts will be available through an open and competitive sealed bid tender process.
“Within this tender process there is an opportunity for existing contractors to tender for additional work. This work can be amalgamated with their existing contract quantity into a new contract,” he said.
“VicForests is looking to develop contract terms and conditions that achieve greater certainty and efficiency for contractors and VicForests.
“We have moved to five-year contracts in order to maximise security for contractors.
“This will also assist with reducing costs and improving operational and business skills in relation to harvest and haulage,” Mr Runnalls said
Request for Tender documents are available for download from VicForests website at www.vicforests.com.au/tenders.htm.
Request for Tender documents can also be provided by mail. Companies can email their Company name, contact name, phone details and postal address to: [email protected] or contact Reception on (03) 9608 9501.
Tender of Harvest and Haulage ContractsVicForests is calling for tenders from suitably qualified harvest and haulage contractors.
Ross Runnalls, VicForests’ Manager, Firest Contract-ing, said tenders need to be submitted to VicForests by Friday, July 30th 2010.
“Three harvest and three transport contracts are being offered by VicForests, “ Mr Runnalls said.
“These contracts will cover the annual harvest and transport of approximately 80,000m3 of log product from native hardwood forests in the Central Highlands region.
“Two fivee-year contracts and one one-year contract for both harvest and haulage will commence in October 2010 with a nine month annual operating period.
“These contracts will be available through an open and competitive sealed bid tender process.
“Within this tender process there is an opportunity for existing contractors to tender for additional work. This work can be amalgamated with their existing contract quantity into a new contract,” he said.
“VicForests is looking to develop contract terms and conditions that achieve greater certainty and efficiency for contractors and VicForests.
“We ahve moved to five-year contracts in order to maxi-mise security for contractors.
“This will also assist with reducing costs and improving operational and business skills in relation to harvest and haulage, “ Mr Runnalls said.
Request for tender documents are available for down-load from VicForests website at www.vicforests.com.au/tenders.htm
Request for tender documents can also be provided by mail. Companies can email their Company name, contact name, hone details and postal address to [email protected]
Advertising: Tel +61 7 3256 1779 Email: [email protected] PAgE | issuE 132 | 05.07.10 18
Advertising SalesCustom Publishing GroupT: (07) 32561776e: [email protected]
ProductionT: (07) 3392 9810e: [email protected]
www.industryenews.com.au
Timber & Forestry e news is publishedby Custom Publishing Group.
Timber & Forestry e news is a full colour e magazineemailed every Monday to Decision Makers withinthe Australian and New Zealand Timber and Forestrysectors.
Advertising is booked with a minimum 4 weekbooking with discounts for 12, 24 and 48 weekbookings.
12 week- 7.5% Discount24 week- 10% Discount48 week- 15% DiscountClassified ads can be booked in a per issue basis.All advertisements link to customer websites oremail address with an option for rich text (flash).
BENEFITS:
DIRECT PENETRATION via email.WEEKLY opposed to monthly alternatives.NEWS that is up to date that will ensure readership.COST EFFECTIVE advertising rates.
All prices quoted plus GST and based on Art being supplied.We can create artwork if required – Eighth/Quarter $44 Half $66 which will be billed if complete art is notsupplied to our specifications.
Video: Maximum 3 meg swf file. Animation: gif file
Due to the regularity of timber & forestry e news and the tight deadlines no customer proofs can be sent.
SDisplay Ads
Rate Size Specificationsper Issue + GST Height x Width
Full Page Bleed $330 303mm x 216mm Half Page Vertical $182 254mm x 93mm Half Page Horizontal $182 125mm x 190mm Third Page Horizontal $143 73mm x 190mmQuarter Page Vertical $120 125mm x 93mmEighth Page $72 60mm x 93mmFront Page Third Horizonal $176 73mm x 190mmFront Page Masthead $77 33mm x 45mm
Classifieds
Half Page Vertical $182 220mm x 93mm
Quarter Page Vertical $120 107mm x 93mm
Eighth Page Horizontal $72 51mm x 93mm
Full Page Bleed $330 303mm x 216m
Display Ads Minimum 4 issue booking
Classified Ads per week
Extras: Video and Animated ads - Add 20% per issue
Artwork Specifications: Please supply all artwork as High Resolution (300dpi) Pdf’s or jpegs.Send artwork to [email protected]
DEADLINES Booking – Noon Wednesday for Monday edition. Material – Noon Thursday
Terms: Account Clients- 14 days New Accounts: Payment on Booking All Classifieds- Payment on booking (Credit card preferred)
RATES
T: (07) 3841 8075