-
Price ListMarch 2020
Islands Collection by Knoll®
-
Table of Contents
Introduction Knoll and Sustainable Design 2Materials and Finish Options 3
Straight Leg Tables Straight Leg, Occasional Heights 5Straight Leg - Desk Height 16
X-Base Tables X-Base Tables - Occasional Heights 28X-Base Tables - Desk Height 35X-Base Tables - Standing Height 38X-Base Tables - Conference 43
MX Base Tables MX Base Tables - Occasional Heights 58MX Base Tables - Desk Height 66MX Base Tables - Standing Height 70MX Base Tables - Conference 76
Accessories Electrical Units - Drop-in 90Electrical Units - Power Square 93Electrical Units - Clamp-On 96Electrical Units - Offset Clamp-On 98Electrical Units - for Chicago 100Electrical Units - Undermount 104Electrical Units - Wide Channel Desktop Outlets 105Wire Management 107
Alpha-Numeric Index 110
Selling Policy 115
General Ordering Information 118
Islands Collection by Knoll®
PLILT01211
Copyright � 2020 Knoll, Inc.All rights reserved.All prices effective 03/15/2020.
-
Knoll and Sustainable Design
Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports materialhealth product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our NorthAmerican facilities.)
Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products.Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation forindustry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards.Knoll certifications include: Forest Stewardship Council (FSC�), Intertek’s Clean Air Program, Business and Institutional FurnitureManufacturer’s Association (BIFMA) LEVEL� certification, International Living Future Institute’s (ILFI) Declare labelling and CertifiedEnvironmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizationsachieve credits for Leadership in Energy and Environmental Design (LEED�), WELL and the Living Building Challenge (LBC) buildingcertifications.
In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO14001:2015 certified. Knoll sets objectives and targets to reduce energy, water and waste. These initiatives are part of a long-termstrategy to further reduce energy consumption and lower our carbon footprint.
We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s FullCircle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options forrepurposing or recycling that mitigate landfill impact through energy-from-waste conversion.
For more information about Knoll and sustainable design, visit www.knoll.com/environment.
2
-
Materials and Finish Options
For specific product applications for eachfinish refer to the finish matrix on the followingpages.
KNOLL CORE LAMINATESSolid Colors111 Jet Black* **114 Folkstone Grey* **115 Medium Grey* **117 Soft Grey* **118 Bright White* **119 Pumice* **128 Fog* **
Patterned121 Micro Grey122 Brushed Sand123 Brushed Grey129 Micro Sand
Wood Grain124 Medium Cherry* **125 Natural Maple* **126 Natural Cherry* **127 Walnut* **139 Light Ash* **140 Warm Ash* **141 Whitened Ash*142 Grey Ash* **143 Classic Oak* **144 Graphite Pear* **145 Zebra*147 Silverwood**148 Smokewood**149 Barnwood**
*Matching edgeband available**Melamine worksurface finish
POLISHED FINISHPD ChromeAL Aluminum
KNOLL CORE PAINTS111T Jet Black112T Brown113T Dark Grey114T Folkstone Grey115T Medium Grey116T Sandstone117T Soft Grey118T Bright White611T Beige Mist Metallic612T Medium Metallic Grey613T Silver
EDGE OPTIONS FOR LAMINATEWORKSURFACESSPLY Ply Edge Synthetic (L pricing)
GRAIN DIRECTIONHorizontal (H)Vertical (V):
Grain direction applies to wood grain laminates,techwoods and natural veneers.
IslandsCollectionbyKnoll
3
-
Materials and Finish Options
Wood FinishesCodes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill options andgloss levels.
Code V1 TECHWOOD
638 Blond Maple628 Dark Mahogany639 Light Cherry641 Black Oak506 Maple509 Cherry512 Medium Walnut513 Medium Teak514 Espresso637 Natural644 Light Walnut645 Dove Grey
Code V2 PREMIUM TECHWOOD
647 White Pine640 Ebony642 Grigio
V2 Natural Veneer020 Natural Oak038 Rustic Walnut017 Light Walnut002 Bronze Cherry006 Maple021 Peacock Green Walnut022 Old English Walnut037 Birch
Code V3 PREMIUM VENEER
039 Pippy Oak044 Figured Sycamore
Gloss Level Fill LevelA Low Gloss Closed PoreB Medium Gloss Closed PoreC High Gloss Closed Pore
D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore
Edge Options for VeneersSYN Complementary SyntheticSPLY Synthetic Ply Edge *
* Ply Edge available on Birch (037) worksurfaces.
Note:For more detailed information on Veneer finishes, please refer to the Wood Finish Matrix on the Knoll.com site.
IslandsCollectionbyKnoll
4
-
Straight Leg, Occasional Heights12�, 15� and 18� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table12� High
30� 30� 12� ILTRD(S/B4/T4)SG301( )( )( )( )( )( )( ) $1,171. $1,369. $1,455. $1,676.36� 36� 12� ILTRD(S/B4/T4)SG361( )( )( )( )( )( )( ) 1,206. 1,404. 1,490. 1,711.42� 42� 12� ILTRD(S/B4/T4)SG421( )( )( )( )( )( )( ) 1,241. 1,439. 1,525. 1,746.48� 48� 12� ILTRD(S/B4/T4)SG481( )( )( )( )( )( )( ) 1,276. 1,474. 1,560. 1,781.54� 54� 12� ILTRD(S/B4/T4)SG541( )( )( )( )( )( )( ) 1,313. 1,525. 1,628. 1,869.60� 60� 12� ILTRD(S/B4/T4)SG601( )( )( )( )( )( )( ) 1,359. 1,587. 1,709. 1,974.
*Available with Glides only.
Round Table15� High
30� 30� 15� ILTRD(S/B4/T4)SG302( )( )( )( )( )( )( ) 1,196. 1,394. 1,480. 1,701.36� 36� 15� ILTRD(S/B4/T4)SG362( )( )( )( )( )( )( ) 1,231. 1,429. 1,515. 1,736.42� 42� 15� ILTRD(S/B4/T4)SG422( )( )( )( )( )( )( ) 1,266. 1,464. 1,550. 1,771.48� 48� 15� ILTRD(S/B4/T4)SG482( )( )( )( )( )( )( ) 1,301. 1,499. 1,585. 1,806.54� 54� 15� ILTRD(S/B4/T4)SG542( )( )( )( )( )( )( ) 1,338. 1,550. 1,653. 1,894.60� 60� 15� ILTRD(S/B4/T4)SG602( )( )( )( )( )( )( ) 1,384. 1,612. 1,734. 1,999.
*Available with Glides only.
Round Table18� High
30� 30� 18� ILTRD(S/B4/T4)(SG/SC)303( )( )( )( )( )( )( ) 1,196. 1,394. 1,480. 1,701.36� 36� 18� ILTRD(S/B4/T4)(SG/SC)363( )( )( )( )( )( )( ) 1,231. 1,429. 1,515. 1,736.42� 42� 18� ILTRD(S/B4/T4)(SG/SC)423( )( )( )( )( )( )( ) 1,266. 1,464. 1,550. 1,771.48� 48� 18� ILTRD(S/B4/T4)(SG/SC)483( )( )( )( )( )( )( ) 1,301. 1,499. 1,585. 1,806.54� 54� 18� ILTRD(S/B4/T4)(SG/SC)543( )( )( )( )( )( )( ) 1,338. 1,550. 1,653. 1,894.60� 60� 18� ILTRD(S/B4/T4)(SG/SC)603( )( )( )( )( )( )( ) 1,384. 1,612. 1,734. 1,999.
*Available with Glides and Casters.
Order Code
Example: ILTRDSSG301IL Islands Collection by
Knoll�T TableRD RoundS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (30�, 36�,42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
5
-
Straight Leg, Occasional Heights12�, 15� and 18� HighSquare Table
description d w h pattern no. L V1 V2 V3
Square Table12� High
30� 30� 12� ILTSQ(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSQ(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSQ(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSQ(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSQ(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSQ(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.
*Available with Glides only.
Square Table15� High
30� 30� 15� ILTSQ(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSQ(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,341.42� 42� 15� ILTSQ(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSQ(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSQ(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSQ(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides only.
Square Table18� High
30� 30� 18� ILTSQ(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSQ(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSQ(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSQ(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 18� ILTSQ(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSQ(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides and Casters.
Order Code
Example: ILTRDSSG301IL Islands Collection by
Knoll�T TableSQ SquareS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (30�, 36�,42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D4, D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
6
-
Straight Leg, Occasional Heights12�, 15� and 18� HighSquare Table with Curved Corners
description d w h pattern no. L V1 V2 V3
Square Table, 12� HighCurved corners
30� 30� 12� ILTSC(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSC(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSC(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSC(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSC(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSC(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.
*Available with Glides only.
Square Table, 15� HighCurved corners
30� 30� 15� ILTSC(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSC(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 15� ILTSC(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSC(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSC(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSC(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides only.
Square Table, 18� HighCurved Corners
30� 30� 18� ILTSC(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSC(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSC(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSC(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 18� ILTSC(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSC(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides and Casters.
Order Code
Example: ILTSCSSG301IL Islands Collection by
Knoll�T TableSC Square with Curved
CornersS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (30�, 36�,42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
7
-
Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Square Tables
description d w h pattern no. L V1 V2 V3
Soft square Table12� High
30� 30� 12� ILTSS(S/B4/T4)SG301( )( )( )( )( )( ) $1,027. $1,150. $1,206. $1,331.36� 36� 12� ILTSS(S/B4/T4)SG361( )( )( )( )( )( ) 1,062. 1,185. 1,241. 1,366.42� 42� 12� ILTSS(S/B4/T4)SG421( )( )( )( )( )( ) 1,094. 1,229. 1,299. 1,441.48� 48� 12� ILTSS(S/B4/T4)SG481( )( )( )( )( )( ) 1,127. 1,301. 1,386. 1,554.54� 54� 12� ILTSS(S/B4/T4)SG541( )( )( )( )( )( ) 1,168. 1,356. 1,459. 1,649.60� 60� 12� ILTSS(S/B4/T4)SG601( )( )( )( )( )( ) 1,213. 1,418. 1,540. 1,755.
*Available with Glides only.
Soft square Table15� High
30� 30� 15� ILTSS(S/B4/T4)SG302( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 15� ILTSS(S/B4/T4)SG362( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 15� ILTSS(S/B4/T4)SG422( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 15� ILTSS(S/B4/T4)SG482( )( )( )( )( )( ) 1,152. 1,304. 1,390. 1,552.54� 54� 15� ILTSS(S/B4/T4)SG542( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 15� ILTSS(S/B4/T4)SG602( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides only.
Soft square Table18� High
30� 30� 18� ILTSS(S/B4/T4)(SG/SC)303( )( )( )( )( )( ) 1,052. 1,184. 1,254. 1,396.36� 36� 18� ILTSS(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,087. 1,219. 1,289. 1,431.42� 42� 18� ILTSS(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,119. 1,254. 1,324. 1,466.48� 48� 18� ILTSS(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,152. 1,254. 1,324. 1,466.54� 54� 18� ILTSS(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,193. 1,381. 1,484. 1,674.60� 60� 18� ILTSS(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,238. 1,443. 1,565. 1,780.
*Available with Glides and Casters.
Example: ILTSSSSG301IL Islands Collection by
Knoll�T TableSS Soft SquareS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Notes
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (30�, 36�,42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
8
-
Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Pentagon Tables
description d w h pattern no. L V1 V2 V3
Soft pentagon Tables12� High
36� 36� 12� ILTPT(S/B4/T4)SG361( )( )( )( )( )( ) $1,412. $1,607. $1,692. $1,924.42� 42� 12� ILTPT(S/B4/T4)SG421( )( )( )( )( )( ) 1,447. 1,642. 1,727. 1,959.48� 48� 12� ILTPT(S/B4/T4)SG481( )( )( )( )( )( ) 1,482. 1,677. 1,762. 1,994.54� 54� 12� ILTPT(S/B4/T4)SG541( )( )( )( )( )( ) 1,517. 1,712. 1,797. 2,029.60� 60� 12� ILTPT(S/B4/T4)SG601( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.
*Available with Glides only.
Soft pentagon Tables15� High
36� 36� 15� ILTPT(S/B4/T4)SG362( )( )( )( )( )( ) 1,497. 1,692. 1,777. 2,009.42� 42� 15� ILTPT(S/B4/T4)SG422( )( )( )( )( )( ) 1,532. 1,727. 1,812. 2,044.48� 48� 15� ILTPT(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTPT(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTPT(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides only.
Soft pentagon Tables18� High
36� 36� 18� ILTPT(S/B4/T4)(SG/SC)363( )( )( )( )( )( ) 1,497. 1,692. 1,777. 2,009.42� 42� 18� ILTPT(S/B4/T4)(SG/SC)423( )( )( )( )( )( ) 1,532. 1,727. 1,812. 2,044.48� 48� 18� ILTPT(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTPT(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTPT(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides and Casters.
Order Code
Example: ILTPTSSG301IL Islands Collection by
Knoll�T TablePT Soft PentagonS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $175 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
9
-
Straight Leg, Occasional Heights12�, 15� and 18� HighSoft Pentagon Tables, Type 2
description d w h pattern no. L V1 V2 V3
Soft Pentagon TablesType 2, 12� High
48� 48� 12� ILTP2(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTP2(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTP2(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.
*Available with Glides only.
Soft Pentagon TablesType 2, 15� High
48� 48� 15� ILTP2(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTP2(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTP2(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides only.
Soft Pentagon TablesType 2, 18� High
48� 48� 18� ILTP2(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTP2(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTP2(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides and Casters.
Order Code
Example: ILTP2SSG301IL Islands Collection by
Knoll�T TableP2 Soft Pentagon Type 2S Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $175 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
10
-
Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Pentagon Tables, Type A
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType A, 12� High
48� 48� 12� ILTOPA(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTOPA(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTOPA(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.
*Available with Glides only.
Organic Pentagon TableType A, 15� High
48� 48� 15� ILTOPA(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTOPA(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTOPA(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides only.
Organic Pentagon TableType A, 18� High
48� 48� 18� ILTOPA(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTOPA(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTOPA(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides and Casters.
Order Code
Example: ILTOPASSG301IL Islands Collection by
Knoll�T TableOPA Organic pentagon Type
AS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Notes
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $175 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
11
-
Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Pentagon Tables, Type B
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType B, 12� High
48� 48� 12� ILTOPB(S/B4/T4)SG481( )( )( )( )( )( ) $1,517. $1,712. $1,797. $2,029.54� 54� 12� ILTOPB(S/B4/T4)SG541( )( )( )( )( )( ) 1,558. 1,767. 1,870. 2,124.60� 60� 12� ILTOPB(S/B4/T4)SG601( )( )( )( )( )( ) 1,603. 1,829. 1,951. 2,229.
*Available with Glides only.
Organic Pentagon TableType B, 15� High
48� 48� 15� ILTOPB(S/B4/T4)SG482( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 15� ILTOPB(S/B4/T4)SG542( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 15� ILTOPB(S/B4/T4)SG602( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides only.
Organic Pentagon TableType B, 18� High
48� 48� 18� ILTOPB(S/B4/T4)(SG/SC)483( )( )( )( )( )( ) 1,567. 1,762. 1,847. 2,079.54� 54� 18� ILTOPB(S/B4/T4)(SG/SC)543( )( )( )( )( )( ) 1,608. 1,817. 1,920. 2,174.60� 60� 18� ILTOPB(S/B4/T4)(SG/SC)603( )( )( )( )( )( ) 1,653. 1,879. 2,001. 2,279.
*Available with Glides and Casters.
Order Code
Example: ILTOPBSSG301IL Islands Collection by
Knoll�T TableOPB Organic Pentagon Type
BS Edge (S/B4/T4)SG Foot (SG/SC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $175 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
12
-
Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Triangle Tables, Left and Right
description d w h pattern no. L V1 V2 V3
Organic triangle Table12� High
Left hand shown
36� 44� 12� ILTOT(L/R)(S/B4/T4)SG36441( )( )( )( )( )( ) $1,269. $1,448. $1,512. $1,718.42� 51� 12� ILTOT(L/R)(S/B4/T4)SG42511( )( )( )( )( )( ) 1,306. 1,498. 1,578. 1,804.48� 59� 12� ILTOT(L/R)(S/B4/T4)SG48591( )( )( )( )( )( ) 1,352. 1,560. 1,660. 1,911.54� 66� 12� ILTOT(L/R)(S/B4/T4)SG54661( )( )( )( )( )( ) 1,401. 1,625. 1,747. 2,024.60� 74� 12� ILTOT(L/R)(S/B4/T4)SG60741( )( )( )( )( )( ) 1,459. 1,704. 1,851. 2,154.
*Available with Glides only.
Organic triangle Table15� High
Left hand shown
36� 44� 15� ILTOT(L/R)(S/B4/T4)SG36442( )( )( )( )( )( ) 1,294. 1,473. 1,537. 1,743.42� 51� 15� ILTOT(L/R)(S/B4/T4)SG42512( )( )( )( )( )( ) 1,331. 1,523. 1,603. 1,829.48� 59� 15� ILTOT(L/R)(S/B4/T4)SG48592( )( )( )( )( )( ) 1,377. 1,585. 1,685. 1,936.54� 66� 15� ILTOT(L/R)(S/B4/T4)SG54662( )( )( )( )( )( ) 1,426. 1,650. 1,772. 2,049.60� 74� 15� ILTOT(L/R)(S/B4/T4)SG60742( )( )( )( )( )( ) 1,484. 1,729. 1,876. 2,184.
*Available with Glides only.
Organic triangle Table18� High
Left hand shown
36� 44� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)36443( )( )( )( )( )( ) 1,294. 1,473. 1,537. 1,743.42� 51� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)42513( )( )( )( )( )( ) 1,331. 1,523. 1,603. 1,829.48� 59� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)48593( )( )( )( )( )( ) 1,377. 1,585. 1,685. 1,936.54� 66� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)54663( )( )( )( )( )( ) 1,426. 1,650. 1,772. 2,049.60� 74� 18� ILTOT(L/R)(S/B4/T4)(SG/SC)60743( )( )( )( )( )( ) 1,484. 1,729. 1,876. 2,184.
*Available with Glides and Casters.
Order Code
Example: ILTOTLSSG36441IL Islands Collection by
Knoll�T TableOT Organic TriangleL Left hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)36 Depth44 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
13
-
Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Elongated Pentagon Tables, Left and Right
description d w h pattern no. L V1 V2 V3
Organic elongatd pentagonTable, 12� High
Left hand shown
35� 60� 12� ILTOE(L/R)(S/B4/T4)SG35601( )( )( )( )( )( )( ) $1,303. $1,494. $1,573. $1,797.39� 66� 12� ILTOE(L/R)(S/B4/T4)SG39661( )( )( )( )( )( )( ) 1,335. 1,537. 1,629. 1,870.42� 72� 12� ILTOE(L/R)(S/B4/T4)SG42721( )( )( )( )( )( )( ) 1,365. 1,577. 1,683. 1,940.45� 78� 12� ILTOE(L/R)(S/B4/T4)SG45781( )( )( )( )( )( )( ) 1,397. 1,620. 1,740. 2,015.48� 84� 12� ILTOE(L/R)(S/B4/T4)SG48841( )( )( )( )( )( )( ) 1,432. 1,667. 1,802. 2,095.
*Available with Glides only.
Organic elongatd pentagonTable, 15� High
Left hand shown
35� 60� 15� ILTOE(L/R)(S/B4/T4)SG35602( )( )( )( )( )( )( ) 1,328. 1,519. 1,598. 1,822.39� 66� 15� ILTOE(L/R)(S/B4/T4)SG39662( )( )( )( )( )( )( ) 1,360. 1,562. 1,654. 1,895.42� 72� 15� ILTOE(L/R)(S/B4/T4)SG42722( )( )( )( )( )( )( ) 1,390. 1,602. 1,708. 1,965.45� 78� 15� ILTOE(L/R)(S/B4/T4)SG45782( )( )( )( )( )( )( ) 1,422. 1,645. 1,765. 2,040.48� 84� 15� ILTOE(L/R)(S/B4/T4)SG48842( )( )( )( )( )( )( ) 1,457. 1,692. 1,827. 2,120.
*Available with Glides only.
Organic elongatd pentagonTable, 18� High
Left hand shown
35� 60� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)35603( )( )( )( )( )( )( ) 1,328. 1,519. 1,598. 1,822.39� 66� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)39663( )( )( )( )( )( )( ) 1,360. 1,562. 1,654. 1,895.42� 72� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)42723( )( )( )( )( )( )( ) 1,390. 1,602. 1,708. 1,965.45� 78� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)45783( )( )( )( )( )( )( ) 1,422. 1,645. 1,765. 2,040.48� 84� 18� ILTOE(L/R)(S/B4/T4)(SG/SC)48843( )( )( )( )( )( )( ) 1,457. 1,692. 1,827. 2,120.
*Available with Glides and Casters.
Order Code
Example: ILTOELSSG35601IL Islands Collection by
Knoll�T TableOE Organic Elongated
PentagonL Left Hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)35 Depth60 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurfaces.
2. Grommet finish:N = Not applicableD12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
14
-
Straight Leg, Occasional Heights12�, 15� and 18� HighOrganic Rectangle Table, Left and Right
description d w h pattern no. L V1 V2 V3
Organic rectangle Table12� High
Left hand shown
33� 60� 12� ILTOR(L/R)(S/B4/T4)SG33601( )( )( )( )( )( )( ) $1,295. $1,483. $1,559. $1,779.33� 72� 12� ILTOR(L/R)(S/B4/T4)SG33721( )( )( )( )( )( )( ) 1,321. 1,519. 1,606. 1,840.39� 60� 12� ILTOR(L/R)(S/B4/T4)SG39601( )( )( )( )( )( )( ) 1,319. 1,516. 1,601. 1,834.39� 72� 12� ILTOR(L/R)(S/B4/T4)SG39721( )( )( )( )( )( )( ) 1,350. 1,558. 1,657. 1,907.
*Available with Glides only.
Organic rectangle Table15� High
Left hand shown
33� 60� 15� ILTOR(L/R)(S/B4/T4)SG33602( )( )( )( )( )( )( ) 1,320. 1,508. 1,584. 1,804.33� 72� 15� ILTOR(L/R)(S/B4/T4)SG33722( )( )( )( )( )( )( ) 1,346. 1,544. 1,631. 1,865.39� 60� 15� ILTOR(L/R)(S/B4/T4)SG39602( )( )( )( )( )( )( ) 1,344. 1,541. 1,626. 1,859.39� 72� 15� ILTOR(L/R)(S/B4/T4)SG39722( )( )( )( )( )( )( ) 1,375. 1,583. 1,682. 1,932.
*Available with Glides only.
Organic rectangle Table18� High
Left hand shown
33� 60� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)33603( )( )( )( )( )( )( ) 1,320. 1,508. 1,584. 1,804.33� 72� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)33723( )( )( )( )( )( )( ) 1,346. 1,544. 1,631. 1,865.39� 60� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)39603( )( )( )( )( )( )( ) 1,344. 1,541. 1,626. 1,859.39� 72� 18� ILTOR(L/R)(S/B4/T4)(SG/SC)39723( )( )( )( )( )( )( ) 1,375. 1,583. 1,682. 1,932.
*Available with Glides and Casters.
Order Code
Example: ILTORLSSG36441IL Islands Collection by
Knoll�T TableOR Organic RectangleL Left hand, (R=Right)S Edge (S/B4/T4)SG Foot (SG/SC)33 Depth60 Width1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)S = Power square (All sizes)All grommets are center on theworksurface.
2. Grommet finish:N = Not applicableD8 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $125 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
15
-
Straight Leg - Desk Height29� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table29� High
48� 48� 29� ILTRD(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) $1,351. $1,549. $1,635. $1,856.54� 54� 29� ILTRD(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,388. 1,600. 1,703. 1,944.60� 60� 29� ILTRD(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,434. 1,662. 1,784. 2,049.
*Available with Glides and Casters.
Order Code
Example: ILTRDSSG484IL Islands Collection by
Knoll�T TableRD RoundS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
16
-
Straight Leg - Desk Height29� HighSquare Tables with Square and Curved Corners
description d w h pattern no. L V1 V2 V3
Square Table29� High
36� 36� 29� ILTSQ(S/B4/T4)(SG/SC)364( )( )( )( )( )( )( ) $1,137. $1,260. $1,316. $1,391.42� 42� 29� ILTSQ(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) 1,169. 1,304. 1,374. 1,466.48� 48� 29� ILTSQ(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,202. 1,376. 1,461. 1,579.54� 54� 29� ILTSQ(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,674.60� 60� 29� ILTSQ(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,780.
*Available with Glides and Casters.
Square Table with curved corners29� High
36� 36� 29� ILTSC(S/B4/T4)(SG/SC)364( )( )( )( )( )( )( ) 1,137. 1,260. 1,316. 1,391.42� 42� 29� ILTSC(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) 1,169. 1,304. 1,374. 1,466.48� 48� 29� ILTSC(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,202. 1,376. 1,461. 1,579.54� 54� 29� ILTSC(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,674.60� 60� 29� ILTSC(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,780.
*Available with Glides and Casters.
Order Code
Example: ILTSQSSG364IL Island Collection by
Knoll�T TableSQ Square,
SC=Square with Curvedcorners
S Edge (S/B4/T4)SG Foot (SG/SC)36 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizesexcept 30�D)All grommets are centered on theworksurface.
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650 forSquare TableBeveled Edge (B4 & T4): $500 forSoft Square TableCasters: $30Grommets D4, D8 & D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
17
-
Straight Leg - Desk Height29� HighSoft Square Tables
description d w h pattern no. L V1 V2 V3
Soft Square Table29� High
42� 42� 29� ILTSS(S/B4/T4)(SG/SC)424( )( )( )( )( )( )( ) $1,169. $1,304. $1,374. $1,516.48� 48� 29� ILTSS(S/B4/T4)(SG/SC)484( )( )( )( )( )( )( ) 1,207. 1,354. 1,440. 1,602.54� 54� 29� ILTSS(S/B4/T4)(SG/SC)544( )( )( )( )( )( )( ) 1,243. 1,431. 1,534. 1,724.60� 60� 29� ILTSS(S/B4/T4)(SG/SC)604( )( )( )( )( )( )( ) 1,288. 1,493. 1,615. 1,830.
*Available with Glides and Casters.
Example: ILTSSSSG424IL Island Collection by
Knoll�T TableSS Soft SquareS Edge (S/B4/T4)SG Foot (SG/SC)42 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Notes
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (42� only)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.
2. Grommet finish:N = Not applicableD4/D8/D12 = B=Black,W=White (textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4, D8 & D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
18
-
Straight Leg - Desk Height29� HighSoft Pentagon and Soft Pentagon Type 2 Tables
description d w h pattern no. L V1 V2 V3
Soft Pentagon Table29� High
48� 48� 29� ILTPT(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) $1,642. $1,837. $1,922. $2,154.54� 54� 29� ILTPT(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTPT(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.
*Available with Glides and Casters.
Soft Pentagon TablesType 2, 29� High
48� 48� 29� ILTP2(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) 1,642. 1,837. 1,922. 2,154.54� 54� 29� ILTP2(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTP2(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,892. 1,995. 2,249.
*Available with Glides and Casters.
Order Code
Example: ILTPTSSG484IL Islands Collection by
Knoll�T TablePT Soft PentagonS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $275 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
19
-
Straight Leg - Desk Height29� HighOrganic Pentagon Type A and B
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType A, 29� High
48� 48� 29� ILTOPA(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) $1,642. $1,837. $1,922. $2,154.54� 54� 29� ILTOPA(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTOPA(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.
*Available with Glides and Casters.
Organic Pentagon TableType B, 29� High
48� 48� 29� ILTOPB(S/B4/T4)(SG/SC)484( )( )( )( )( )( ) 1,642. 1,837. 1,922. 2,154.54� 54� 29� ILTOPB(S/B4/T4)(SG/SC)544( )( )( )( )( )( ) 1,683. 1,892. 1,995. 2,249.60� 60� 29� ILTOPB(S/B4/T4)(SG/SC)604( )( )( )( )( )( ) 1,728. 1,954. 2,076. 2,354.
*Available with Glides and Casters.
Order Code
Example: ILTOPASSG484IL Islands Collection by
Knoll�T TableOPA Organic Pentagon Type
AS Edge (S/B4/T4)SG Foot (SG/SC)48 Size4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (48� &54�)D12 = Narrow slot 12�W (60�only)S = Power square (All sizes)All grommets are centered on theworksurface.
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $275 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
20
-
Straight Leg - Desk Height29� HighOrganic Triangle, Left and Right
description d w h pattern no. L V1 V2 V3
Organic triangle Table29� High
Left hand shown
36� 44� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)36444( )( )( )( )( )( ) $1,344. $1,523. $1,587. $1,793.42� 51� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)42514( )( )( )( )( )( ) 1,381. 1,573. 1,653. 1,879.48� 59� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)48594( )( )( )( )( )( ) 1,427. 1,635. 1,735. 1,986.54� 66� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)54664( )( )( )( )( )( ) 1,476. 1,700. 1,822. 2,099.60� 74� 29� ILTOT(L/R)(S/B4/T4)(SG/SC)60744( )( )( )( )( )( ) 1,534. 1,779. 1,926. 2,234.
*Available with Glides and Casters.
*Available with Glides and Casters.
Order Code
Example: ILTOTLSSG36444IL Islands Collection by
Knoll�T TableOT Organic TriangleL Left hand (R=Right
hand)S Edge (S/B4/T4)SG Foot (SG/SC)36 Depth44 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (3644,4251)D12 = Narrow slot 12�W (4859,5460, 6074)S = Power square (All sizes)All grommets are centered on theworksurface.
2. Grommet finish:N = Not applicableD8/D12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8 & D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
21
-
Straight Leg - Desk Height29� HighOrganic Elongated Pentagon, Left and Right
description d w h pattern no. L V1 V2 V3
Organic elongatd pentagonTable, 29� High
Left hand shown
35� 60� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)35604( )( )( )( )( )( )( ) $1,378. $1,569. $1,648. $1,872.39� 66� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)39664( )( )( )( )( )( )( ) 1,410. 1,612. 1,704. 1,945.42� 72� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)42724( )( )( )( )( )( )( ) 1,440. 1,652. 1,758. 2,015.42� 72� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)45784( )( )( )( )( )( )( ) 1,472. 1,695. 1,815. 2,090.48� 84� 29� ILTOE(L/R)(S/B4/T4)(SG/SC)48844( )( )( )( )( )( )( ) 1,507. 1,742. 1,877. 2,170.
*Available with Glides and Casters.
Order Code
Example: ILTOELSSG35604IL Islands Collection by
Knoll�T TableOE Organic Elongated
PentagonL Left hand (R=Right
hand)S Edge (S/B4/T4)SG Foot (SG/SC)35 Depth60 Width4 271/2� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)S = Power square (All sizes)
2. Grommet Location:CB = Centered Back Edge (Shortedge)CF = Centered Front Edge (Longedge)
3. Grommet finish:N = Not applicableD12 = B=Black, W=White(textured)S = 111, 114, 115, 117
4. Worksurface finish:L, V1, V2, V3
5. Edge finish:Complementary synthetic
6. Top plate finish:Painted/texturedPolished aluminum
7. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
22
-
Straight Leg - Desk Height29� HighOrganic Rectangle, Left and Right
description d w h pattern no. L V1 V2 V3
Organic rectangle Table29� High
Left hand shown
33� 60� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)33604( )( )( )( )( )( )( ) $1,370. $1,558. $1,634. $1,854.33� 72� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)33724( )( )( )( )( )( )( ) 1,396. 1,594. 1,681. 1,915.39� 60� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)39604( )( )( )( )( )( )( ) 1,394. 1,591. 1,676. 1,909.39� 72� 29� ILTOR(L/R)(S/B4/T4)(SG/SC)39724( )( )( )( )( )( )( ) 1,425. 1,633. 1,732. 1,982.
*Available with Glides and Casters.
Order Code
Example: ILTORLSSG33604IL Islands Collection by
Knoll�T TableOR Organic RectangleL Left hand (R=Right
hand)S Edge (S/B4/T4)SG Foot (SG/SC)33 Depth60 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (All sizes)S = Power square (All sizes)
2. Grommet location:CB = Centered Back Edge (Shortedge)CF = Centered Front Edge (Longedge)
3. Grommet finish:N = Not applicableD8 = B=Black, W=White(textured)S = 111, 114, 115, 117
4. Worksurface finish:L, V1, V2, V3
5. Edge finish:Complementary synthetic
6. Top plate finish:Painted/texturedPolished aluminum
7. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
23
-
Straight Leg - Desk Height29� HighRectilinear Tables with Square Corners
description d w h pattern no. L V1 V2 V3
Rectilnear Table withsquare corners
24� 48� 29� ILTRL(S/B4/T4)(SG/SC)48244( )( )( )( )( )( )( ) $1,125. $1,216. $1,264. $1,373.54� 29� ILTRL(S/B4/T4)(SG/SC)54244( )( )( )( )( )( )( ) 1,137. 1,229. 1,282. 1,397.60� 29� ILTRL(S/B4/T4)(SG/SC)60244( )( )( )( )( )( )( ) 1,148. 1,243. 1,300. 1,420.66� 29� ILTRL(S/B4/T4)(SG/SC)66244( )( )( )( )( )( )( ) 1,162. 1,281. 1,346. 1,480.72� 29� ILTRL(S/B4/T4)(SG/SC)72244( )( )( )( )( )( )( ) 1,173. 1,294. 1,363. 1,502.78� 29� ILTRL(S/B4/T4)(SG/SC)78244( )( )( )( )( )( )( ) 1,184. 1,308. 1,381. 1,525.78� 29� ILTRL(S/B4/T4)(SG/SC)84244( )( )( )( )( )( )( ) 1,197. 1,351. 1,428. 1,586.
30� 48� 29� ILTRL(S/B4/T4)(SG/SC)48304( )( )( )( )( )( )( ) 1,148. 1,423. 1,300. 1,420.54� 29� ILTRL(S/B4/T4)(SG/SC)54304( )( )( )( )( )( )( ) 1,162. 1,260. 1,323. 1,450.60� 29� ILTRL(S/B4/T4)(SG/SC)60304( )( )( )( )( )( )( ) 1,176. 1,278. 1,345. 1,479.66� 29� ILTRL(S/B4/T4)(SG/SC)66304( )( )( )( )( )( )( ) 1,192. 1,318. 1,394. 1,542.72� 29� ILTRL(S/B4/T4)(SG/SC)72304( )( )( )( )( )( )( ) 1,206. 1,335. 1,416. 1,571.78� 29� ILTRL(S/B4/T4)(SG/SC)78304( )( )( )( )( )( )( ) 1,219. 1,351. 1,438. 1,599.84� 29� ILTRL(S/B4/T4)(SG/SC)84304( )( )( )( )( )( )( ) 1,234. 1,397. 1,488. 1,664.
36� 48� 29� ILTRL(S/B4/T4)(SG/SC)48364( )( )( )( )( )( )( ) 1,171. 1,271. 1,336. 1,467.54� 29� ILTRL(S/B4/T4)(SG/SC)54364( )( )( )( )( )( )( ) 1,188. 1,291. 1,363. 1,502.60� 29� ILTRL(S/B4/T4)(SG/SC)60364( )( )( )( )( )( )( ) 1,205. 1,312. 1,390. 1,537.66� 29� ILTRL(S/B4/T4)(SG/SC)66364( )( )( )( )( )( )( ) 1,222. 1,355. 1,442. 1,605.72� 29� ILTRL(S/B4/T4)(SG/SC)72364( )( )( )( )( )( )( ) 1,239. 1,375. 1,469. 1,640.78� 29� ILTRL(S/B4/T4)(SG/SC)78364( )( )( )( )( )( )( ) 1,255. 1,395. 1,495. 1,674.84� 29� ILTRL(S/B4/T4)(SG/SC)84364( )( )( )( )( )( )( ) 1,272. 1,443. 1,549. 1,744.
*Available with Glides and Casters.
Order Code
Example: ILTRLSSG48244IL Islands Collection by
Knoll�T TableRL Rectilinear Square
CornerS Edge (S/B4/T4)SG Foot (SG/SC)48 Width24 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)D30 = Narrow slot 30�W(Available on 60� and 96�w tops)S = Power square (All sizes)
2. Grommet finish:N = Not applicableD12/D30 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Grommet location:CC = Centered/Centered(Centered on both length andwidth)CB = Centered/Back(Centered across the width,recessed from back edge)
4. Worksurface finish:L, V1, V2, V3
5. Edge finish:Complementary synthetic
6. Top plate finish:Painted/texturedPolished aluminum
7. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D12: $80Grommets D30: $100Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
24
-
Straight Leg - Desk Height29� HighRectilinear Tables with Curved Corners
description d w h pattern no. L V1 V2 V3
Rectilinear Table withCurved corners
24� 48� 29� ILTRC(S/B4/T4)(SG/SC)48244( )( )( )( )( )( )( ) $1,125. $1,396. $1,394. $1,607.54� 29� ILTRC(S/B4/T4)(SG/SC)54244( )( )( )( )( )( )( ) 1,137. 1,409. 1,412. 1,631.60� 29� ILTRC(S/B4/T4)(SG/SC)60244( )( )( )( )( )( )( ) 1,148. 1,423. 1,430. 1,654.66� 29� ILTRC(S/B4/T4)(SG/SC)66244( )( )( )( )( )( )( ) 1,162. 1,448. 1,459. 1,692.72� 29� ILTRC(S/B4/T4)(SG/SC)72244( )( )( )( )( )( )( ) 1,173. 1,462. 1,477. 1,715.72� 29� ILTRC(S/B4/T4)(SG/SC)78244( )( )( )( )( )( )( ) 1,184. 1,475. 1,494. 1,737.84� 29� ILTRC(S/B4/T4)(SG/SC)84244( )( )( )( )( )( )( ) 1,197. 1,523. 1,550. 1,810.
30� 48� 29� ILTRC(S/B4/T4)(SG/SC)48304( )( )( )( )( )( )( ) 1,148. 1,423. 1,430. 1,654.54� 29� ILTRC(S/B4/T4)(SG/SC)54304( )( )( )( )( )( )( ) 1,162. 1,440. 1,453. 1,684.60� 29� ILTRC(S/B4/T4)(SG/SC)60304( )( )( )( )( )( )( ) 1,176. 1,458. 1,475. 1,713.66� 29� ILTRC(S/B4/T4)(SG/SC)66304( )( )( )( )( )( )( ) 1,192. 1,485. 1,507. 1,754.72� 29� ILTRC(S/B4/T4)(SG/SC)72304( )( )( )( )( )( )( ) 1,206. 1,502. 1,529. 1,783.78� 29� ILTRC(S/B4/T4)(SG/SC)78304( )( )( )( )( )( )( ) 1,219. 1,518. 1,551. 1,811.84� 29� ILTRC(S/B4/T4)(SG/SC)84304( )( )( )( )( )( )( ) 1,234. 1,569. 1,610. 1,888.
36� 48� 29� ILTRC(S/B4/T4)(SG/SC)48364( )( )( )( )( )( )( ) 1,171. 1,451. 1,466. 1,701.54� 29� ILTRC(S/B4/T4)(SG/SC)54364( )( )( )( )( )( )( ) 1,188. 1,471. 1,493. 1,736.60� 29� ILTRC(S/B4/T4)(SG/SC)60364( )( )( )( )( )( )( ) 1,205. 1,492. 1,520. 1,771.66� 29� ILTRC(S/B4/T4)(SG/SC)66364( )( )( )( )( )( )( ) 1,222. 1,522. 1,556. 1,818.72� 29� ILTRC(S/B4/T4)(SG/SC)72364( )( )( )( )( )( )( ) 1,239. 1,542. 1,582. 1,852.78� 29� ILTRC(S/B4/T4)(SG/SC)78364( )( )( )( )( )( )( ) 1,255. 1,562. 1,609. 1,887.84� 29� ILTRC(S/B4/T4)(SG/SC)84364( )( )( )( )( )( )( ) 1,272. 1,615. 1,671. 1,967.
*Available with Glides and Casters.
Order Code
Example: ILTRCSSG48244IL Islands Collection by
Knoll�T TableRC Rectilinear with
Curved CornerS Edge (S/B4/T4)SG Foot (SG/SC)48 Width24 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)D30 = Narrow slot 30�W(Available on 60� to 84�w tops)S = Power square (All sizes)
2. Grommet finish:N = Not applicableD12/D30 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Grommet location:CC = Centered/Centered(Centered on both length andwidth)CB = Centered/Back(Centered across the width,recessed from back edge)
4. Worksurface finish:L, V1, V2, V3
5. Edge finish:Complementary synthetic
6. Top plate finish:Painted/texturedPolished aluminum
7. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Grommets D30: $100Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
25
-
Straight Leg - Desk Height29� High120° Degree Tables
description d w h pattern no. L V1 V2 V3
120° Degree Table withSquare corners
24� 33� 29� ILTVS(S/B4/T4)(SG/SC)24334( )( )( )( )( )( )( ) $1,291. $1,452. $1,493. $1,671.30� 36� 29� ILTVS(S/B4/T4)(SG/SC)30364( )( )( )( )( )( )( ) 1,310. 1,477. 1,527. 1,715.
*Available with Glides and Casters.
120° Degree Table withCurved corners
24� 33� 29� ILTVR(S/B4/T4)(SG/SC)24334( )( )( )( )( )( )( ) 1,291. 1,452. 1,493. 1,671.30� 36� 29� ILTVR(S/B4/T4)(SG/SC)30364( )( )( )( )( )( )( ) 1,310. 1,477. 1,527. 1,715.
*Available with Glides and Casters.
Order Code
Example: ILTVSSSG24334IL Islands Collection by
Knoll�T TableVS 120° Table with Square
corners(CY=with Curvedcorners)
S Edge (S/B4/T4)SG Foot (SG/SC)24 Depth33 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D8 = Narrow slot 8�W (All sizes)S = Power square
2. Grommet finish:N = Not applicableD8 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Top plate finish:Painted/texturedPolished aluminum
6. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D8: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
26
-
Straight Leg - Desk Height29� HighCairo Shaped Tables
description d w h pattern no. L V1 V2 V3
Cairo Shaped Table withSquare corners
30� 52� 29� ILTCS(S/B4/T4)(SG/SC)52304( )( )( )( )( )( )( ) $1,342. $1,521. $1,584. $1,789.36� 63� 29� ILTCS(S/B4/T4)(SG/SC)63364( )( )( )( )( )( )( ) 1,389. 1,584. 1,668. 1,898.
Cairo Shaped Table withCurved corners
30� 52� 29� ILTCY(S/B4/T4)(SG/SC)52304( )( )( )( )( )( )( ) 1,342. 1,521. 1,584. 1,789.36� 63� 29� ILTCY(S/B4/T4)(SG/SC)63364( )( )( )( )( )( )( ) 1,389. 1,584. 1,668. 1,898.
Order Code
Example: ILTCSSSG52304IL Islands Collection by
Knoll�T TableCS Cairo with Square
cornersCY=with Curvedcorners)
S Edge (S/B4/T4)SG Foot (SG/SC)52 Width30 Depth4 29� HighN Grommet option( ) Grommet finish(CC) Grommet location(114) Worksurface finish(SYN) Edge finish(114) Top plate finish(114) Leg finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D12 = Narrow slot 12�W (Allsizes)S = Power square
2. Grommet finish:N = Not applicableD12 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Grommet location:CB = Centered back edge (shortedge)CF = Centered front edge (longedge)
4. Worksurface finish:L, V1, V2, V3
5. Edge finish:Complementary synthetic
6. Top plate finish:Painted/texturedPolished aluminum
7. Leg finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB4 = Thin beveled edge four sidesT4 = Thick beveled edge four sides
*Foot:SG = GlideSC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D12: $80Polished finish: $225 (Top plate,leg or both)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
27
-
X-Base Tables - Occasional Heights12�, 15� and 18� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table12� High
30� 12� ILTRD(S/B/T)X301( )( )( )( )( )( ) $954. $1,121. $1,165. $1,335.36� 12� ILTRD(S/B/T)X361( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 12� ILTRD(S/B/T)X421( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.
*Available with Glides only.
Round Table15� High
30� 15� ILTRD(S/B/T)X302( )( )( )( )( )( ) 954. 1,121. 1,165. 1,335.36� 15� ILTRD(S/B/T)X362( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 15� ILTRD(S/B/T)X422( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.
*Available with Glides only.
Round Table18� High
30� 18� ILTRD(S/B/T)(X/XC)303( )( )( )( )( )( ) 954. 1,121. 1,165. 1,335.36� 18� ILTRD(S/B/T)(X/XC)363( )( )( )( )( )( ) 982. 1,157. 1,213. 1,397.42� 18� ILTRD(S/B/T)(X/XC)423( )( )( )( )( )( ) 1,014. 1,200. 1,269. 1,470.
*Available with Glides and Casters.
Order Code
Example: ILTRDSX301IL Islands Collection by
Knoll�T TableRD RoundS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
28
-
X-Base Tables - Occasional Heights12�, 15� and 18� HighSquare Tables
description d w h pattern no. L V1 V2 V3
Square Table12� High
30� 12� ILTSQ(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSQ(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSQ(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Square Table15� High
30� 15� ILTSQ(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSQ(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSQ(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Square Table18� High
30� 18� ILTSQ(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSQ(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSQ(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides and Casters.
Order Code
Example: ILTSQSX301IL Islands Collection by
Knoll�T TableSQ SquareS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $650Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
29
-
X-Base Tables - Occasional Heights12�, 15� and 18� HighSoft Square Tables
description d w h pattern no. L V1 V2 V3
Soft Square Table12� High
30� 12� ILTSS(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSS(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSS(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Soft Square Table15� High
30� 15� ILTSS(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSS(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSS(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Soft Square Table18� High
30� 18� ILTSS(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSS(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSS(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides and Casters.
Order Code
Example: ILTSSSX301IL Islands Collection by
Knoll�T TableSS Soft SquareS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
30
-
X-Base Tables - Occasional Heights12�, 15� and 18� HighSquare Tables with Curved Corners
description d w h pattern no. L V1 V2 V3
Square Table, 12� HighCurved Corners
30� 12� ILTSC(S/B/T)X301( )( )( )( )( )( ) $809. $924. $968. $1,078.36� 12� ILTSC(S/B/T)X361( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 12� ILTSC(S/B/T)X421( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Square Table, 15� HighCurved Corners
30� 15� ILTSC(S/B/T)X302( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 15� ILTSC(S/B/T)X362( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 15� ILTSC(S/B/T)X422( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides only.
Square Table, 18� HighCurved Corners
30� 18� ILTSC(S/B/T)(X/XC)303( )( )( )( )( )( ) 809. 924. 968. 1,078.36� 18� ILTSC(S/B/T)(X/XC)363( )( )( )( )( )( ) 837. 960. 1,016. 1,141.42� 18� ILTSC(S/B/T)(X/XC)423( )( )( )( )( )( ) 869. 1,004. 1,074. 1,216.
*Available with Glides and Casters.
Order Code
Example: ILTSCSX301IL Islands Collection by
Knoll�T TableSC Square table with curved
cornersS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
31
-
X-Base Tables - Occasional Heights12�, 15� and 18� HighSoft Pentagon
description d w h pattern no. L V1 V2 V3
Soft Pentagon Table12� High
30� 12� ILTSP(S/B/T)X301( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 12� ILTSP(S/B/T)X361( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 12� ILTSP(S/B/T)X421( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Soft Pentagon Table15� High
30� 15� ILTSP(S/B/T)X302( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 15� ILTSP(S/B/T)X362( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 15� ILTSP(S/B/T)X422( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Soft Pentagon Table18� High
30� 18� ILTSP(S/B/T)(X/XC)303( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 18� ILTSP(S/B/T)(X/XC)363( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 18� ILTSP(S/B/T)(X/XC)423( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides and Casters.
Order Code
Example: ILTSPSX301IL Islands Collection by
Knoll�T TableSP Soft PentagonS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
32
-
X-Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type A
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType A, 12� High
30� 30� 12� ILTOPA(S/B/T)X301( )( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 36� 12� ILTOPA(S/B/T)X361( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 12� ILTOPA(S/B/T)X421( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Organic Pentagon TableType A, 15� High
30� 30� 15� ILTOPA(S/B/T)X302( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 15� ILTOPA(S/B/T)X362( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 15� ILTOPA(S/B/T)X422( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Organic Pentagon TableType A, 18� High
30� 30� 18� ILTOPA(S/B/T)(X/XC)303( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 18� ILTOPA(S/B/T)(X/XC)363( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 18� ILTOPA(S/B/T)(X/XC)423( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides and Casters.
Order Code
Example: ILTOPASX301IL Islands Collection by
Knoll�T TableOPA Organic Pentagon Type
AS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
33
-
X-Base Tables - Occasional Heights12�, 15� and 18� HighOrganic Pentagon Type B
description d w h pattern no. L V1 V2 V3
Organic Pentagon TableType B, 12� High
30� 30� 12� ILTOPB(S/B/T)X301( )( )( )( )( )( )( ) $998. $1,161. $1,205. $1,387.36� 36� 12� ILTOPB(S/B/T)X361( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 12� ILTOPB(S/B/T)X421( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Organic Pentagon TableType B, 15� High
30� 30� 15� ILTOPB(S/B/T)X302( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 15� ILTOPB(S/B/T)X362( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 15� ILTOPB(S/B/T)X422( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides only.
Organic Pentagon TableType B, 18� High
30� 30� 18� ILTOPB(S/B/T)(X/XC)303( )( )( )( )( )( )( ) 998. 1,161. 1,205. 1,387.36� 36� 18� ILTOPB(S/B/T)(X/XC)363( )( )( )( )( )( )( ) 1,024. 1,197. 1,252. 1,448.42� 42� 18� ILTOPB(S/B/T)(X/XC)423( )( )( )( )( )( )( ) 1,056. 1,239. 1,308. 1,520.
*Available with Glides and Casters.
Order Code
Example: ILTOPBSX301IL Islands Collection by
Knoll�T TableOPB Organic Pentagon Type
BS Edge (S/B/T)X Foot (X/XC)30 Size1 Height (1/2/3)N Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish (36� & 42�):Painted/texturedPolished aluminum
6. Column finishPainted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick.
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height (to top of worksurface):1 = 12�H2 = 15�H3 = 18�H
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
34
-
X-Base Tables - Desk Height29� HighRound Tables
description d w h pattern no. L V1 V2 V3
Round Table29� High
30� 30� 29� ILTRD(S/B/T)(X/XC)304( )( )( )( )( )( )( ) $979. $1,146. $1,190. $1,360.36� 36� 29� ILTRD(S/B/T)(X/XC)364( )( )( )( )( )( )( ) 1,007. 1,182. 1,238. 1,422.42� 42� 29� ILTRD(S/B/T)(X/XC)424( )( )( )( )( )( )( ) 1,039. 1,225. 1,294. 1,495.
*Available with Glides and Casters.
Order Code
Example: ILTRDSX304IL Islands Collection by
Knoll�T TableRD RoundS Edge (S/B/T)X Foot (X/XC)30 Width4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge finish(114) Cone finish(114) Column finish(114) Foot finish
Specification Information
To order please specify patternnumber including:1. Grommet option:
N = None (no grommet)D4 = Narrow slot 4�W (36�, 42�)S = Power square (36�, 42�)
2. Grommet finish:N = Not applicableD4 = B=Black, W=White(textured)S = 111, 114, 115, 117
3. Worksurface finish:L, V1, V2, V3
4. Edge finish:Complementary synthetic
5. Cone finish:Painted/texturedPolished aluminum
6. Column finish:Painted/texturedPolished aluminum
7. Foot finishPainted/texturedPolished aluminum
All Worksurfaces are 1 1/4� thick .
Edges:S = Square EdgeB = Thin beveled edge four sidesT = Thick beveled edge four sides
*Foot:X = GlideXC = Caster
Height 29� is to top of worksurface.
Application Notes
The following upcharges apply:Beveled Edge (B4 & T4): $500Casters: $30Grommets D4: $80Polished finish: $100 (Cone,Column, Foot or all)
All electrical accessories arespecified separately.
Refer to Accessories section forelectrical component pricing.
Islands Collection by Knoll®
35
-
X-Base Tables - Desk Height29� HighSquare, Soft Square and Square with Curved Corners Tables
description d w h pattern no. L V1 V2 V3
Square Table29� High
30� 29� ILTSQ(S/B/T)(X/XC)304( )( )( )( )( )( ) $834. $949. $993. $1,103.36� 29� ILTSQ(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSQ(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.
*Available with Glides and Casters.
Soft Square Table29� High
30� 29� ILTSS(S/B/T)(X/XC)304( )( )( )( )( )( ) 834. 949. 993. 1,103.36� 29� ILTSS(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSS(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.
*Available with Glides and Casters.
Square Table, 29� HighCurved Corners
30� 29� ILTSC(S/B/T)(X/XC)304( )( )( )( )( )( ) 834. 949. 993. 1,103.36� 29� ILTSC(S/B/T)(X/XC)364( )( )( )( )( )( ) 862. 985. 1,041. 1,166.42� 29� ILTSC(S/B/T)(X/XC)424( )( )( )( )( )( ) 894. 1,029. 1,099. 1,241.
*Available with Glides and Casters.
Order Code
Example: ILTSQSX304IL Islands Collection by
Knoll�T TableSQ Square
SS=Soft SquareS Edge (S/B/T)X Foot (X/XC)30 Width / Depth4 29� HighN Grommet option( ) Grommet finish(114) Worksurface finish(SYN) Edge fi