Download - Installation Instructions J & J.PDF
Transcript
Seal and Test
= 1 O-ring Percover
Zurn = 4 3/8"x 1 1/4" boltsWatts = 3 5/16x1 1/2" boltsSmith = 3 5/16 x 1 1/4" bolts
Zurn = 4 3/8" washersWatts = 3 5/16 washersSmith = 3 5/16 washers
1. Remove from package and check to be sure you have allthe parts needed. Count out o-rings, bolts and washers See drawing #1
2. Ensure the o-ring is secure in the indicated groove for awater tight seal.
3. Place the bolts and washers through the holes in the cover. See drawing #2
4. Securely line the bolt holes up with on the cover and thedrain. Ensure that your O-ring is seated properly.
5. Tighten the bolts to 40lbs of torque
Drawing #1 Parts included
Drawing #2
Installation Instructions