Information
HAVER & BOECKER
HAVERLinear Bag Applicator
COMPACT
2
Linear Bag Applicator Type Compact for Valve Bags
Equipment configuration
The HAVER Valve BagApplicator Type Compactis a flexible and uncom-plicated design for sta-tionary packing machineswith one or two fillingspouts.
Thanks to the space-sav-ing and flexible construc-tion, this applicator canbe installed even intotight fitting spaces.
The HAVER BagApplicator systemCompact can handleglued valve bags madefrom PE, PP or paper.
The linear bag applica-tion process allows forreliable bag applicationeven with close toler-ances between innervalve and filling spout.
The placing in readinessof the empty bags iseffected in a quick-change cart-type emptybag magazine with astorage capacity of up to300 bags.
3
4
1
2
3 5
6
Linear Bag Applicator Type Compact for Valve Bags
1. Suction bar
2. Centering
3. Valve cone
5
4
4. Gripper claw
5. Optimal valve opening
6. Bundle magazine
The most upper valve bag ispicked up by a suction bar (1) andplaced upon two centering barsfrom adjusted height by gravity.This device allows for the valvebag to adjust itself to the rightlevel and most centered positionfor the gripper claw (4).Subsequently, the valve is openedand, depending on the features,formed by a valve cone (3). Thefilling electronic of the packingmachine will send a signal to startthe bag application process. Thebag applicator unit, driven by anelectromotor with crank design(5), moves in linear motion.
The capacity of the HAVER ValveBag Applicator Type Compact isapproximately 700 bags/hr.
System Advantages:
• Uncomplicated and compactdesign
• Bundle magazine integrated inthe bag applicator unit (6) withan empty bag capacity of up to300 bags
• Uncomplicated adjustment fordifferent bag sizes and stylesconsidering identical valve bot-tom width
• Uncomplicated feeding ofempty bag bundles and fastchange of bag magazines
• Secured and controlled openingof the bag valve
• Low maintenance drive technol-ogy
• Control devices for bag valveopening and proper bag applica-tion process
• Bag valve centerig prior toopening (5)
• Additional bag valve openingdevices available
• Operator and maintenancefriendly design
• Highest quality and capacitycriteria
6
HAVER Linear-Aufsteckautomat Compact
Bild oben: SpeicherprogrammierbareSteuerung S 7-300 mit Profibus-Schnittstelle L 2-DP
Bild links:ASA-Compact Bedienoberfläche mit Sortenvorwahl über Bedienterminal BT 15
7
HA
VE
R
HA
VE
RH
AVER
HAV
ER
HA
VE
R
HA
VE
R
HAVER Bag Applicator ASA L-Compact for 1 filling spout andASA LV-Compact for 2 filling spouts
Depending on the local situation, thecart-type empty bag magazine can bepushed-in from the front or sideward
ASA L-Compact
ASA LV-Compact
HAVER
Stationary Bag Applicator
HAVER & BOECKER
P.O. Box 33 20 • D-59282 OELDE, Germany • Phone: +49-25 22-30 0 • Telefax: +49-25 22-3 04 03E-Mail: [email protected] • Internet: http://www.haverboecker.com
Affiliated Company USA: HAVER FILLING SYSTEMS, INC.Phone: +1-770 760-11 30 • Telefax: +1-770 760-11 81
E-Mail: [email protected] • Internet: http://www.haverusa.com
Affiliated Company Brazil: HAVER & BOECKER Latinoamericana Màqs. Ltda.Phone: +55-19-879-9100 • Telefax: +55-19-879-1410
E-Mail: [email protected]
Affiliated Company France: HAVER FRANCE S.A.R.L.Phone: +33.01.39.11.80.80 • Telefax: +33.01.39.11.80.89
E-Mail: [email protected]
Simple solution for complex automation task!All under one roof – all out of one hand.
PM
207
E 2
476
0400
3 F
e