With its GIW® Minerals slurry products line, KSB has the know-how
and experience to increase productivity and profits. GIW pumps and
systems are designed to match your maintenance cycle. Let KSB’s
solutions improve your business and reduce unplanned outages.
We’re here to meet your specific needs, wherever and whenever
you need us.
Lower Costs; Increased Efficiencies
Choose GIW® Minerals products and spend more
time running your business.
■■ Installation and startup support
■■ Onsite technical support
■■ Requirements check list for all units
■■ REGEN Service Centers renew your rotating
equipment back to OEM standards
■■ On and off-site repair services
■■ Timely equipment inspections, reports and repairs
■■ Predictive maintenance and repair services
■■ System analysis and process optimization
Whatever you need, it‘s here; GIW slurry pumps are targeted to improve your unique applications
Optimal Wear Life with “Slurry Diverter”
■■ ■Lower Specific Speed Design: A large diameter impeller
results in slower pump operation leading to extended parts
wear life. In addition, the lower specific speed allows the
pump to meet the variable flow conditions confronted in
modern mill circuits.
■■ ■Longer Wearing Materials: Thicker cross sections and
advanced materials translate into long, predictable
pump service life.
■■ ■Deep Base Circle: Minimizes aggressive particle
impingement and promotes “sliding” wear action.
Typical abrasive wear drops dramatically.
■■ ■Oversize Shrouds: Enhances clearing vane performance –
minimizing recirculation and wear between the impeller
and suction liner.
■■ ■Patented Inlet 5V Impeller: Designed to handle both liquid
and solid phases within the slurry. This maximizes pump
performance and wear life.
■■ ■Slurry Diverter: GIW’s latest technology dramatically
increases suction liner life by reducing particle recirculation
and slurry concentration between the impeller and liner.
■■ ■Adjustable Suction Liner: Extended suction liner wear life
maximizes productivity and minimizes cost by matching
operating cycle times with scheduled mill outages.
GIW MDX Design Features
1,000 2,000 5,000500
1,000 2,000 5,000
200
180
160
140
120
100
80
60
40
20
0
54
60
48
42
36
30
24
18
12
6
010,000 20,000 50,000 100,000
10,000 20,000
Flowrate (m3/hr)
Flowrate (gpm)
Hea
d (
ft)
Hea
d (
m)M
DX
750
MD
X 6
50
MD
X 5
50
MD
X 4
50
MD
X 3
50
MD
X 2
50
MD
X 1
50
MD
X 6
00
MD
X 5
00
MD
X 4
00
MD
X 3
00
MD
X 2
00
1,000100400
300
200
100
0
80
60
40
20
01,000 10,000 100,000100
10,000Flowrate (m3/hr)
Flowrate (gpm)
Hea
d (
ft)
Hea
d (
m)
26x2
8 LS
A 5
8
20x2
4 LS
A 4
8
18x1
8 LS
A 4
4
16x1
6 LS
A 3
9
12x1
4 LS
A 3
6
10x1
2 LS
A 3
2
8x10
LSA
25
6x8
LSA
25
4x6
LSA
25
4x6
LSA
21
2x3
LSA
21
3x4 LSA 21
22X24 LSA 54
LSA S Pump Range
30 40 50 60 80 100 200 300 300
100 200 300 500 700 1000 2000 4000 6000 10000 20000
700 1000 2000 4000
200
150
100
80
60
50
40
30
20
15
108
6
5
4
0
500
600
400
300
200
100
80
60
50
40
30
20
0
Flowrate (m3/hr)
Flowrate (gpm)
Hea
d (
ft)
Hea
d (
m)
LCC
50 -
230
(2"
x 9"
)
LCC
80 -
300
(3"
x 12
")LC
C 10
0 - 4
00 (4
" x
16")
LCC
150
- 500
(6"
x 20
")LC
C 20
0 - 6
10 (8
" x
24")
LCC
250
- 660
(10"
x 2
6")
LCC
300
- 710
(12"
x 2
8")
2400 RPM1740 RPM 1355 RPM
1070 RPM 880 RPM810 RPM 750 RPM
3710 RPM 2700 RPM2090 RPM
1650 RPM1360 RPM 1250 RPM 1160 RPM
Typical RPM Limitfor Rubber Wet End
LCC Pump Range
MDX Pump Range
02 03GIW® Minerals Hard Rock Pumps
Mill Duty Solutions
GIW® Minerals pumps and hydrocyclones are designed
to work at the heart of the mill circuit tackling the most
extreme duty conditions. GIW expertly combines advanced
materials, patented designs and extensive real world
experience to maximize productivity and minimize cost by
matching operating cycle times with scheduled mill outages.
Our extensive knowledge, along with a global support network, ensures
effective mineral processing solutions specific to your operation. From
slurry to waste water we have every step of the pumping process covered.
Process Solutions
ZWLCC
MDX/LSA
LSA HP/TBC
LCC
HVF
Hydrocyclones
Ground Water Levelling■■ B Pump■■ UPA Series
Mine Dewatering ■■ LSA (HP)■■ LCC-M■■ LCC-R■■ Hydrocyclone■■ Multitec■■ Amarex KRT
Mine Site (not shown in diagram)
Chemicals■■ CPKN
Pregnant Liquid ■■ CPKN
Heap Leaching Plants (not shown in diagram)
■■ CPKN■■ KWP
Metal Refinery (not shown in diagram)
ConcentratorsGrinding Circuit■■ MDX■■ TBC■■ LSA■■ LCC XH■■ LCV■■ ZW■■ Hydrocyclone
Flotation Circuit ■■ HVF■■ LSA■■ LCC-M■■ LCC-R■■ ZW■■ KWP
Tailings■■ LSA■■ TBC■■ LCC■■ Hydrocyclone
Process Water ■■ Etanorm■■ Omega■■ RDL■■ Amarex KRT■■ B Pump
Copper Grinding and Concentrator Plant
04 05GIW® Minerals Hard Rock Pumps
Most Severe Solutions
LSA-SQ [m3/h] max. 14,000H [m] max. 90p [bar] max. 16T [°C] max. + 120
Premium design, hard iron pumps for long wear life while handling severe slurries. The basic, single-wall construction and heavy suction, hard metal wet end combined with the cartridge bearing assembly provides maximum reliability and easy maintenance.
TBCQ [m3/h] max. 18,200H [m] max. 90p [bar] max. 37T [°C] max. + 120
A high-pressure design, these pumps are constructed as horizontal, end suction centrifugal pumps to give maximum resistance to wear while simplifying maintenance. The conventional single-wall design transfers stress loads to non-wearing side plates in high-pressure applications.
MDXQ [m3/h] max. 14,000H [m] max. 90p [bar] max. 16T [°C] max. + 120
The latest technology from GIW® Minerals provides superior wear life and increased uptime handling your most aggressive slurry applications. Ideal for grinding circuits, SAG and Ball Mill discharge and cyclone feed.
LCVQ [m3/h] max. 2,045H [m] max. 38p [bar] max. 10T [°C] max. + 120
Vertical cantilever, rugged hard metal sump pump with bottom suction and no submerged bearings. Includes replaceable wet end parts in metal alloys with a durable mechanical end. Ideal for industrial process pumping, tailings disposal in mining and pit use.
Hydrocyclone
T [°C] max. + 120 GIW® Minerals' line of hydrocyclones features a patented long wearing design that can reduce rebuild time by up to 75%. Diameters available up to 840 mm.
Heavy Duty SolutionsLCC-M/LCC-R
Q [m3/h] max. 3,405 H [m] max. 90p [bar] max. 16T [°C] max. + 120
The hydraulic wet end consists of three components: a shell or casing, an impeller and a suction plate/liner to permit easy removal for maintenance and inspections. Reliable pumps for high discharge head, mildly corrosive slurries and a wide range of particle sizes.
HVF (High Volume Froth) PumpQ [m3/h] max. 8,175H [m] max. 35p [bar] max. 10T [°C] max. + 120
GIW® Minerals' HVF pump provides continuous operation without shutdown or operator intervention. The new hydraulic design removes air from the impeller eye while the pump is running, and the pump can be retrofit into any existing application. It is environmentally friendly and cost effective.
ZWQ [m3/h] max. 400H [m] max. 35p [bar] max. 10T [°C] max. + 120
Vertical cantilever, rugged hard metal sump pumps with top and bottom suction and no submerged bearings. Replaceable wet end parts in metal alloys with a durable mechanical end.
Process Solutions
KWPQ [m3/h] max. 1,300H [m] max. 100p [bar] max. 10T [°C] max. + 280
Horizontal, radially split volute casing pump in back pull out or close coupled design, single-stage, single-entry, available with various impeller types: non-clogging impeller, free flow impeller. Designed to ATEX. Ideal for all types of slurries without stringy substances and pulps up to 5% bone dry with a maximum density of 1.1 kg/dm 3.
Amarex KRTQ [m3/h] max. 10,800H [m] max. 100 p [bar] max. 120T [°C] max. + 60
Vertical, single-stage, submersible motor pump in close coupled design, various impeller types, for wet or dry installation, stationary and transportable version. Design to ATEX. Can handle all types of abrasive or aggressive waste water.
B PumpQ [m3/h] max. 2000H [m] max. 300p [bar] max. 20T [°C] max. + 80
The assembly is formed by turbine assembly, discharge column and drive stand (for solid shaft driver) or distributor (for hollow shaft driver). Ideal for raw water applications.
Omega/RDLO
Q [m3/h] max. 10,000H [m] max. 240p [bar] max. 25T [°C] max. + 70
Single-stage, axially split volute casing pump for horizontal or vertical installation with double-entry radial impeller, mating flanges to DIN, ISO, BS or ANSI.
CPKNQ [m3/h] max. 4150H [m] max. 185p [bar] max. 25T [°C] max. + 400
Horizontal, radially split volute casing pump in back pull out design to EN 22 858 / ISO 2858 / ISO 5199, single-stage, single-entry, with radial impeller. Also available as variant with “wet” shaft, conical seal chamber, heatable volute casing (CPKNO-CHs) and/or semi open impeller (CPKNO). Design to ATEX. Suitable for heap leaching applications.
Etanorm/Etanorm RQ [m3/h] max. 1900H [m] max. 170p [bar] max. 25T [°C] max. + 105
Horizontal, long coupled, single-/two-stage volute casing pump in back pull out design. Replaceable shaft sleeves/shaft protecting sleeves and wear rings. Design to ATEX. Ideal for water supply systems.
UPA 100-250CQ [m3/h] max. 840H [m] max. 460T [°C] max. + 50
Multistage submersible borehole pump with a non-return valve integrated in the discharge nozzle. Ideal for maintaining/lowering of ground water levels in mines.
MultitecQ [m3/h] max. 850H [m] max. 630p [bar] max. 63T [°C] max. + 200
High-pressure pump in ring-section design, with axial or radial suction nozzle and cast radial impellers. Design to ATEX. Ideal for water supply systems and general industry.
06 07GIW® Minerals Products
GIW Industries, Inc. (A KSB Company)5000 Wrightsboro Road, GrovetownGeorgia 30813-2842, USAwww.ksb.com/giwminerals 24
01.0
24-U
S / 0
5.15
/ ©
GIW
Ind
ust
ries
, In
c. 2
015
· Su
bje
ct t
o t
ech
nic
al m
od
ific
atio
n w
ith
ou
t p
rio
r n
oti
ce.
Serving You at these GIW REGEN Locations
Georgia, USA
Manufacturing & Service Center
968 Ferrous Road NEThomson, GA 30824 USATel. +1 706-595-5950Fax +1 706-595-6962
Email: [email protected]
Florida, USA
Manufacturing & Service Center
1351 S.R. 60 WestMulberry, FL 33860 USATel. +1 863-425-4961Fax +1 863-425-4850
Email: [email protected]
Canada
Office & Service Centre
220 MacLennan CRFort McMurray, Alberta T9H4E8 CanadaTel. +1 780-713-3457Fax +1 780-713-3458
Email: [email protected]
Northern Mining Services
Service Center
3891 South Dublin RoadHibbing, MN 55746 USATel. +1 218-262-3626Fax +1 218-262-3627
Email: [email protected]
GIW Newsletter
Subscribe online:
www.ksb.com/giwminerals
Support Services:
Technical Services
Tel. +1 706-434-0683Fax +1 706-210-5967 [email protected]
Parts Sales and Customer Service
Tel. +1 706-863-1011 Ext. 2407Dir. +1 706-434-0707Fax +1 [email protected]
After Hours Breakdown Rush - 24/7
Cell +1 706-513-0585 (For emergencies only)