Download - HANDOVER GUIDE - Staffare
HANDOVER GUIDE
métHODOlOGIE
2
THE MAIN STAGES IN THE HANDOVER PROCESS
THE LEFT SIDE
THE REAR
We suggest that you perform handover in 5 stages. Of course, depending on the time available, the profile of your customer and the finish of the machine, this handover may be adapted.
1
2
3
From the decal on the door, explain the model name,then present :
� The hydraulic oil tank � The oil tank � The cut-off battery � The replacement battery � The windscreen washer tank � The brake fluid tank � The fuel trap � The access to the hydraulic oil tank with
the screw � System to avoid confusion with the diesel � The 4 greasing screws located behind
the wheel
Show: � The ground clearance and the whellbase � The retractable rear lights � The trailer connection* � The directional steering ram inside and
above the Axle � The safety sheath (to lock the lifting ram) � The rear mirror � The location of the air-conditioning radiator
under the roof cap* � The assistance pump* � Rear axle hydraulic locking (MT 1135 HA-MT1335 HA) � Air-conditioning*
THE RIGHT SIDEShow the principle of opening the engine hoods.And show the various components accessible:
� The oil engine level � The oil filter � The cooling liquid level
*According to the option
mEtHODOlOGy
3
mt 835/1135/1335
THE CAB5Show:
� Fuse box � Regeneration switch � The cab filtration � The steering column adjustment � The seat (different, depending on option) � Radio car* � The electric window � Heating / Air-conditioning* � The emergency-stop button � The JSM® � The dashboard � Platform use switch � The movement cut-off
THE FRONT
THE RIGHT SIDEShow:
� The stabilizers (only MT 1135 and MT 1335)
� The 3 rear-view mirrors (road standard) � The solidity of the structure with the
moulded head � The locking carriage for attachments
(Hydraulic locking*) � The attachments (if needed) � Frame leveling ram � Frame leveling indicator
� The separating prefilter air + the fuel filter � Air filter � The engine oil filler
*According to the option
4
Before performing handover, remember to:
� PrePare the machine - cleanliness, - check fuel level, - check overload, etc.
� CHeCK all documents to be given to the customer: Instruction Manual, maintenance book, etc.
CAUTION
According tothe models,
the handover of the machine must
be different
Worth knowing
CAB
JSM®
The JSM® (Joystick Switch and Move) lets you control, in complete safety and without fatigue, all your movements with a SINGLe HaND:
Towards the front: lower the boom
Towards the rear: raise the boom
Left: dip the bucket
Right: empty the contents of the bucket
Telescoping: exit or re-entry
Hydraulic attachment line
Red FNR (Front Neutral Reverse) button: reverser
FOCUS
1
2
3
4
5 5
6 6
1
2
3
4
5
6
7
7
Emergency Stop
Self levelling
JSM®
Gear lever
Steering mode lever
Stabilisers
Dashboard
Heating / air-conditioning*
Radio car
*According to the option
4
5
DASHBOARD
The DaSHBOarD gives you, via its DIGITaL INFOrMaTION SCreeN, the maintenance perio-dicity, the gear engaged, the travel speed, the boom angle, the consumption and all information necessary for the operator.
*According to the option
mt 835/1135/1335Use
the Instruction Manual“
”Digital
access lock indicator
Forward neutral/reverse indicator
Load moment indicator
Fuel level
Oil levelWheel alignment indicator
Light indicator
Digital indicator: speed, hour meter, gearbox
Lightindicator
Rpm
Bucket mode MT 835
Attachment forcedoperation
Rear fog light
Working light
Inching mode*
Menu Goback
Rotating beacon
Menu validation
Test mode LMI
Hazard warning lights
Lock JSM® or tilting of carriage
Parking brake
Boom suspension
Suspended load mode
ECS*
The double green band indicates thatthese buttons give access to the menu.
FOCUS mlt 840
SEMI-AUTOMATIC WHEEL REALIGNMENT*3 steering modes
� 4 STeerING WHeeLS for short radius on narrow places
� 2 FrONT STeerING WHeeLS to ensure safety on the road
� CraB-STeerING for sideways approaches and difficult clearance
1
21
2
FOCUS
6
*According to the option
REGENERATIONThe particle filter must be regularly cleared of soot so that it does not clog and its correct functioning is not hindered.
PASSIVE REGENERATION
If passive regeneration cannot be envisaged for reasons of temperature, load or speed, active regeneration should be used to eliminate the soot particles.
- Automatic operation
- Increase in engine speed
- The operator can continue to work
This natural cleaning process occurs under engine’s normal functioning condition.
The engine independently controls the cleaning. The operator can continue to work.
ACTIVE REGENERATION
98% of cases
Activation of stationary regeneration.
Deactivation of active regeneration, actioned by the operator if he/she does not want an increase in temperature.
STATIONARYREGENERATION
Operation triggered by the operator, upon request from the machine (help screen displayed).
Procedure to be complied with (see Instruction Manual).
Duration of the operation: ~ 50 min
2% of cases
7
mt 835/1135/1335
INCHING FUNCTION*This function plays a role of a «CLUTCH». Independently of the engine speed, INCHING lets you manage forward movement and the attachment with precision.
The approach is performed precisely and functioning is simple
� Forward speed to be managed with the brake pedal.
� Green indicator if the function is activated on the dashboard.
ACCESS PLATFORM USE
FUNCTIONS LIST
aCCeSS PLaTFOrM SeT UP
All functions except: � Tilting � Self leveling � Stabilizers
Locking bar fitted through the carriage
Machineleveled
Switch in cab
Control box plugged
Parking Brake engaged
Stabilizers lowered and on pressure
*According to the option
www.manitou.com
HANDOVER GUIDE
HG002EN_A_0213_MT835_1135_1335
Febr
uary
201
3
Key points for dynamic handoverDuring DYNaMIC HaNDOVer, address:
� the visibility, � the functioning of the 4 steerable wheels, � the changing attachments, � the engine, � the hydraulic movements (JSM®…). �
Maintenance � Present the regular maintenance according to the recommendations of the instruction notice.
VaLIDaTe the maintenance contract with the customer and, if necessary, mention the warranty extension and the various maintenance contracts proposed.
SecurityPresent the SaFeTY rULeS given in the instruction notice.eMPHazISe:
� the use of MANITOU parts and attachments, � the risks incurred if the instructions are not complied with, � the load chart.
For more informationTechnical instruction sheets on www.manitou.com
Security