INDUSTRIAL
ASSEMBLY
ADHESIVE
PRODUCT &
SELECTION
GUIDE
INDUSTRIAL
ASSEMBLY
ADHESIVE
PRODUCT &
SELECTION
GUIDE
Set Sail with the Industry Leader in AdhesivesSet Sail with the Industry Leader in Adhesives
455 W. Victoria StreetCompton, CA 90220 USA
Toll-free 800-888 -8312
Tel: 310-898-3300 • Fax: 310-898-3392
Website: www.ipscorp.com
E-Mail: [email protected]
WELD-ON® products by IPS® Corporation
are intended for use by skilled individuals.
We urge users to verify by tests that these
products, as well as the recommended
methods, are suitable for the materials being
used in their application. Product bulletins,
Material Safety Data Sheets and product label
information should be read before using our
adhesives. We will gladly supply you with
appropriate sample material for any product.
©IP
S
12
-20
07
Lit
. #
23
01
21
Work with WELD-ON® by IPS ® Corporation the Leader in Adhesive Technology
Now, you no longer need to worry about which
adhesive will make the strongest, most attractive
finished products. Whether your application calls for
strength, weather resistance, clear seams or quick
set, IPS Corporation has the right WELD-ON adhesive
to fit your needs.
We offer the most complete line of solvent cements
and adhesives for use with acrylics, vinyls,
polycarbonate, PETG and other plastics, as well as
with non-plastic materials. And because choosing the
right adhesive can be difficult, we offer technical
support, samples and comprehensive product literature
to assist you in making your selection.
This brochure will introduce you to our plastic cements
and adhesives. If you need more information, please
give us a call at 1-800-888-8312.
ABS Acry
licCe
ll Ca
stAc
rylic
Cros
s-Li
nked
Acry
licEx
trude
d
Buty
rate
Conc
rete
Fibe
rgla
ss
Met
al
PETG
Polyc
arbo
nate
Polye
ster
Polyu
reth
ane
PVC
(Rig
id)
PVC
(Fle
xible
)PV
C (F
oam
ed)
Styr
ene
Woo
d
WELD-ON® INDUSTRIAL ASSEMBLY ADHESIVE SELECTION GUIDE
ABS
AcrylicCell Cast
AcrylicCross-Linked
AcrylicExtruded
Butyrate
Concrete
Fiberglass
Metal
PETG
Polycarbonate
Polyester
Polyurethane
PVC (Rigid)
PVC (Flexible)
PVC (Foamed)
Styrene
Wood
2354 16 10 16 16 10 10 45 16 16 40/42 66 10 45 16 16 451707/4707 1802 40/42 1802 55/58 45 45 10 55/58 55/58 10 4784 16/4052 40/42 1802
55/58 40/42 40/42 40/42 40/42 40/42 55/58 45 45
16 40/42 10 40/42 16 10 10 10 10 16 40/42 66 40/42 45 16 16 451802 3/4 40/42 3/4 40/42 45 45 45 40/42 40/42 10 4784 16 40/42 405240/42 16 16 45 16 45 4052 45 10
10 10 10 10 40/42 10 10 10 10 10 40/42 40/42 10 45 40/42 10 1040/42 40/42 40/42 40/42 10 45 45 45 40/42 40/42 10 10 40/42 45 40/42 45
45 45 45 45
16 40/42 10 40/42 16 10 10 10 10 10 40/42 66 40/42 45 16 16 451802 3/4 40/42 3/4 40/42 45 45 45 40/42 40/42 10 4784 16 40/42 405240/42 16 16 45 16 45 4052 45 10
16 16 40/42 16 3/2007 10 10 45 16 16 40/42 66 16 66 66 1802 4555/58 40/42 10 40/42 16 45 45 10 55/58 55/58 10 4784 55/58 4784 40/42 16 10
45/40/42 45 45 45 55/58 40/42 40/42 45 55/58 40/42 45 45 45
10 10 10 10 10 10 10 10 10 10 10 10 10 45 10 10 1045 45 45 45 45 45 45 45 45 45 45 45 45 45 45
10 10 10 10 10 10 10 10 10 10 10 10 10 45 10 10 1045 45 45 45 45 45 45 45 45 45 45 45 45 45 45
45 10 10 10 45 10 10 10 10 10 10 10 10 45 45 10 1010 45 45 45 10 45 45 45 45 45 45 45 10 45 45
16 10 10 10 16 10 10 10 55/58 55/58 40/42 10 10 45 16 16 45 55/58 40/42 40/42 40/42 55/58 45 45 45 3/4 40/42 45 40/42 40/42 1040/42 16 45 16 40/42 40/42 45 16 45
16 16 10 10 16 10 10 10 55/58 55/58 40/42 10 40/42 45 16 10 4555/58 40/42 40/42 40/42 55/58 45 45 45 40/42 3/4 10 10 40/42 1640/42 45 45 45 40/42 45 16 45 16 45 1802
40/42 40/42 40/42 40/42 40/42 10 10 10 40/42 40/42 40/42 10 40/42 45 10 40/42 1010 10 10 10 10 45 45 45 45 10 10 1829 10 40/42 10 1829
45 45 45 45
66 66 40/42 66 66 10 10 10 10 10 10 66 66 66 66 10 454784 4784 10 4784 4784 1829 4784 4784 4784 4784 4555/58 55/58 55/58 45
10 40/42 10 40/42 16 10 10 10 10 40/42 40/42 66 2007 2007 16 10 4516/4052 16 40/42 16 55/58 45 45 45 40/42 10 10 4784 10/40/42 45 2007 16
45 4052 45 4052 40/42 16 16 1007/4007 40/42/45 1802
45 45 45 45 66 45 45 45 45 45 45 66 2007 2007 2007 2007 454784 4784 45 66/4784 45 4545 45 45
16 16 40/42 16 16 10 10 45 16 16 10 66 16 2007 2007 1802 4540/42 40/42 45 40/42 40/42 45 45 10 40/42 40/42 40/42 4784 2007 45 16 16 10
45 45 45 45 45 45 45 40/42/45 40/42/45 45
16 16 10 16 1802 10 10 10 16 10 40/42 10 10 2007 1802 4807 451802 4052 40/42 4052 16 45 45 45 10 16 10 45 16 45 16 16
10 10 45 1802 1802 45 1802
45 45 10 45 45 10 10 10 45 45 10 45 45 45 45 45 4545 10 45 45 45 1829 10
• No hand mixing
• Reduces fabrication time
• Eliminates waste
• Reduces odors
• Lower volatile emissions
• Bonds most plastics & metals
• Consistent high strength bonds
IPS® Corporation leads the adhesives industry with the most complete line
of solvent cements and adhesives for bonding plastics. You can count on
consistent, high-quality WELD-ON adhesives, such as 4, 10, 16, 40, 45,
and 55.
Since 1955, IPS Corporation has been known worldwide for developing
and manufacturing quality adhesives and cements for joining plastics and
other materials. In fact, IPS Corporation was the first to produce a reliable
cement for use with PVC and ABS pipe and fittings.
Today, this commitment to innovation continues along with the assurance
of receiving the highest quality adhesives.
That’s why we use state-of-the-art equipment, such as a gas chromatograph,
FTIR spectrophotometer, colorimeter, bond strength tester and viscometer,
to check everything from the raw materials to the final product.
If you need additional assistance in selecting a WELD-ON adhesive for
your specific application, call us at 1-800-888-8312.
Get on board with WELD-ON® Adhesives and CementsACRYLICS
3 Clear 1 1.30 2 Water-Thin
4 Clear 1 1.12 2 Water-Thin
16 Clear 1 1.11 2 800
28 Clear 3 1.03 1 3,400
40 Clear 2 1.03 1* 2,900
42 Clear 2 1.03 1* 2,900
1802 Clear 1 0.89 3 300
VINYLS
66 Clear 1 0.85 3 260
1001 Clear 1 0.94 3 500
1007 Clear 1 0.91 3 110
1909 Clear 1 0.90 3 500
1910 Clear 1 0.92 3 2,100
2007 Clear 1 0.85 3 Water-Thin
4007 Clear 1 0.93 3 800
4052 Amber** 1 0.94 3 500
4784 Clear 1 0.90 3 335
4909 Clear 1 0.94 3 900
ABS
1707 Milky 1 0.87 3 900
2354 Clear 1 0.81 3 Water-Thin
4707 Milky 1 0.88 3 4,000
POLYCARBONATE
55 Clear 2 1.14 1 4,000
58 Clear 2 1.14 1 4,000
STYRENE
4807 Milky 1 0.88 3 600
STRUCTURAL
10 White 2 1.03 1 40,000
45 Tan 2 1.05 1 500,000
811 White 2 1.05 1.5 40,000
GENERAL PURPOSE and SPECIAL APPLICATIONS
57 Blue 1 0.81 3 Water-Thin
1829 Tan 1 0.86 2 1,750
3061 Clear 1 0.94 2 Water-Thin
WELD-ON®
NUMBER COLORNUMBER OF
COMPONENTSTYPICAL SPECIFIC
GRAVITYTYPICAL VISCOSITY
(cps)
MINIMUMEXPECTEDSHELF LIFE@ 73ºF (yr)
TYPICAL PROPERTIES OF WELD-ON® ADHESIVES AND CEMENTS
* Refrigeration is recommended to increase shelf life.** Thin layer of solvent cement on substrate appears clear when dry.
ACRYLICS3 #
Non-flammable, water thin, very fast-setting solvent cement for bondingacrylics. Also bonds styrene, butyrate, PETG, and polycarbonate tothemselves. Will not bond to cross linked acrylics. Low Voc
4*Water thin, moderately fast-setting solvent cement for bonding acrylics.Also bonds styrene, butyrate, PETG, and polycarbonate to themselves.Will not bond to cross linked acrylics. Low Voc
16*Fast-setting, medium bodied, high strength acrylic cement. Also bondsrigid PVC, ABS, styrene, butyrate, polycarbonate to themselves andeach other, as well as other plastics and porous surfaces. Low Voc
28*Three-component, reactive, high strength acrylic based adhesive.Good weatherability. Meets Mil Spec A-8576C Type II. Low Voc
40*Two-component, reactive, high strength cement for bonding andfabricating all acrylics to each other and to polyester, butyrate, PVC,ABS, PETG, etc. Meets Mil Spec A-8576C Type lll. Low Voc
42*Has the same physical properties as #40, but is packaged in a twocomponent cartridge for use with a dispensing gun and mixing tip.
Low Voc
1802Medium-setting, light bodied cement for bonding acrylic, styrene, rigidPVC, ABS, and butyrate to themselves.
VINYLS66
Thin-bodied, fast-curing, versatile contact cement for bonding flexibleor rigid vinyl to itself or to urethane, leather, canvas, ABS, foamed PVC,butyrate, and wood.
1001*Thin-bodied, slow setting cement for bonding flexible or rigid vinyl,foamed PVC, ABS, acrylic, and non-plastics to themselves and eachother. Useful for bonding rigid or semi-rigid vinyl to aluminum, glass,wood, and other rigid materials. Low Voc
1007Thin-bodied, very fast-setting cement for bonding rigid vinyl, foamedPVC, and Kydex®.
1909Medium-bodied, fast-setting cement for bonding flexible vinyl to itselfor other plastics, as well as to some porous materials such as wood,leather, etc. Water resistant.
1910Heavy-bodied, slow-setting cement for bonding flexible or rigid vinylto itself or other plastics, as well as to some porous materials such aswood, leather, etc. Water resistant.
2007Water thin, very fast-setting solvent cement for bonding PVC, foamedPVC, and Kydex® to themselves and to each other.
ABS1707
Medium bodied, fast setting, cement for bonding ABS only.
2354Thin-bodied, fast setting cement for bonding ABS and styreneto themselves. Not for joining dissimilar materials.
4707*Low VOC version of 1707.
WELD-ON® Adhesives and CementsVINYLS
4007*
Low VOC version of 1007.
4052*Multipurpose, medium-bodied cement for bonding PVC, CPVC, ABS,styrene, Noryl®, and foamed PVC. Low Voc
4784*Medium-bodied, fast-setting cement for bonding flexible vinyl to itselfor other plastics (e.g. ABS, butyrate, rigid PVC, acrylic, etc.) as wellas to some porous materials such as wood, leather, and canvas.Weather resistant. Low Voc
4909*Low VOC version of 1909.
STRUCTURAL10*
Two-component, high strength, high viscosity structural adhesive forbonding PVC, acrylic, ABS, and polycarbonate. Also bonds well tosteel, non-anodized aluminum, other metals, etc. Low Voc
45Two-component, high strength, high viscosity, reactive structuraladhesive for bonding unprepared and corrosion resistant metals,composites, and plastics (e.g. ABS, acrylic, aluminum, brass,copper galvanized steel, PETG, polycarbonate, and PVC).
811*Has the same physical properties as 10, but is packaged in a twocomponent cartridge for use with a dispensing gun and mixing tip.
Low Voc
GENERAL PURPOSE andSPECIAL APPLICATIONS
57 #
A multi-purpose plastics cleaner for acrylics, polycarbonate, butyrate,vinyl, ABS, Styrene, etc.
1829Medium-bodied, general purpose, elastomer-based adhesive for bondinga wide variety of plastic and non-plastic materials to themselves andto each other (e.g. acrylics, canvas, flexible and rigid vinyl, glass, metal,urethane foam, wood, etc.) Also bonds some synthetic rubber.
3061*Thinner for Acrylic Cement #40 Component A (Acrylic Monomer).
Low Voc
POLYCARBONATE55*
VOC-free, two-component, slow-setting, reactive, urethane-basedadhesive for bonding polycarbonate, butyrate, ABS, and PETG tothemselves and each other. Excellent UV light resistance.
No Voc
58*VOC-free, two-component, fast-setting, reactive, urethane-basedadhesive for bonding polycarbonate, butyrate, ABS, and PETG tothemselves and each other. Excellent UV light resistance.
No Voc
* These products meet maximum VOC requirements of South Coast Air QualityManagement District (SCAQMD) Rule 1168.
# These products are not available in SCAQMD.
STYRENE4807*
Medium bodied, fast setting cement for joining styrene to itself.Low Voc
ACRYLICS3 #
Non-flammable, water thin, very fast-setting solvent cement for bondingacrylics. Also bonds styrene, butyrate, PETG, and polycarbonate tothemselves. Will not bond to cross linked acrylics. Low Voc
4*Water thin, moderately fast-setting solvent cement for bonding acrylics.Also bonds styrene, butyrate, PETG, and polycarbonate to themselves.Will not bond to cross linked acrylics. Low Voc
16*Fast-setting, medium bodied, high strength acrylic cement. Also bondsrigid PVC, ABS, styrene, butyrate, polycarbonate to themselves andeach other, as well as other plastics and porous surfaces. Low Voc
28*Three-component, reactive, high strength acrylic based adhesive.Good weatherability. Meets Mil Spec A-8576C Type II. Low Voc
40*Two-component, reactive, high strength cement for bonding andfabricating all acrylics to each other and to polyester, butyrate, PVC,ABS, PETG, etc. Meets Mil Spec A-8576C Type lll. Low Voc
42*Has the same physical properties as #40, but is packaged in a twocomponent cartridge for use with a dispensing gun and mixing tip.
Low Voc
1802Medium-setting, light bodied cement for bonding acrylic, styrene, rigidPVC, ABS, and butyrate to themselves.
VINYLS66
Thin-bodied, fast-curing, versatile contact cement for bonding flexibleor rigid vinyl to itself or to urethane, leather, canvas, ABS, foamed PVC,butyrate, and wood.
1001*Thin-bodied, slow setting cement for bonding flexible or rigid vinyl,foamed PVC, ABS, acrylic, and non-plastics to themselves and eachother. Useful for bonding rigid or semi-rigid vinyl to aluminum, glass,wood, and other rigid materials. Low Voc
1007Thin-bodied, very fast-setting cement for bonding rigid vinyl, foamedPVC, and Kydex®.
1909Medium-bodied, fast-setting cement for bonding flexible vinyl to itselfor other plastics, as well as to some porous materials such as wood,leather, etc. Water resistant.
1910Heavy-bodied, slow-setting cement for bonding flexible or rigid vinylto itself or other plastics, as well as to some porous materials such aswood, leather, etc. Water resistant.
2007Water thin, very fast-setting solvent cement for bonding PVC, foamedPVC, and Kydex® to themselves and to each other.
ABS1707
Medium bodied, fast setting, cement for bonding ABS only.
2354Thin-bodied, fast setting cement for bonding ABS and styreneto themselves. Not for joining dissimilar materials.
4707*Low VOC version of 1707.
WELD-ON® Adhesives and CementsVINYLS
4007*
Low VOC version of 1007.
4052*Multipurpose, medium-bodied cement for bonding PVC, CPVC, ABS,styrene, Noryl®, and foamed PVC. Low Voc
4784*Medium-bodied, fast-setting cement for bonding flexible vinyl to itselfor other plastics (e.g. ABS, butyrate, rigid PVC, acrylic, etc.) as wellas to some porous materials such as wood, leather, and canvas.Weather resistant. Low Voc
4909*Low VOC version of 1909.
STRUCTURAL10*
Two-component, high strength, high viscosity structural adhesive forbonding PVC, acrylic, ABS, and polycarbonate. Also bonds well tosteel, non-anodized aluminum, other metals, etc. Low Voc
45Two-component, high strength, high viscosity, reactive structuraladhesive for bonding unprepared and corrosion resistant metals,composites, and plastics (e.g. ABS, acrylic, aluminum, brass,copper galvanized steel, PETG, polycarbonate, and PVC).
811*Has the same physical properties as 10, but is packaged in a twocomponent cartridge for use with a dispensing gun and mixing tip.
Low Voc
GENERAL PURPOSE andSPECIAL APPLICATIONS
57 #
A multi-purpose plastics cleaner for acrylics, polycarbonate, butyrate,vinyl, ABS, Styrene, etc.
1829Medium-bodied, general purpose, elastomer-based adhesive for bondinga wide variety of plastic and non-plastic materials to themselves andto each other (e.g. acrylics, canvas, flexible and rigid vinyl, glass, metal,urethane foam, wood, etc.) Also bonds some synthetic rubber.
3061*Thinner for Acrylic Cement #40 Component A (Acrylic Monomer).
Low Voc
POLYCARBONATE55*
VOC-free, two-component, slow-setting, reactive, urethane-basedadhesive for bonding polycarbonate, butyrate, ABS, and PETG tothemselves and each other. Excellent UV light resistance.
No Voc
58*VOC-free, two-component, fast-setting, reactive, urethane-basedadhesive for bonding polycarbonate, butyrate, ABS, and PETG tothemselves and each other. Excellent UV light resistance.
No Voc
* These products meet maximum VOC requirements of South Coast Air QualityManagement District (SCAQMD) Rule 1168.
# These products are not available in SCAQMD.
STYRENE4807*
Medium bodied, fast setting cement for joining styrene to itself.Low Voc
IPS® Corporation leads the adhesives industry with the most complete line
of solvent cements and adhesives for bonding plastics. You can count on
consistent, high-quality WELD-ON adhesives, such as 4, 10, 16, 40, 45,
and 55.
Since 1955, IPS Corporation has been known worldwide for developing
and manufacturing quality adhesives and cements for joining plastics and
other materials. In fact, IPS Corporation was the first to produce a reliable
cement for use with PVC and ABS pipe and fittings.
Today, this commitment to innovation continues along with the assurance
of receiving the highest quality adhesives.
That’s why we use state-of-the-art equipment, such as a gas chromatograph,
FTIR spectrophotometer, colorimeter, bond strength tester and viscometer,
to check everything from the raw materials to the final product.
If you need additional assistance in selecting a WELD-ON adhesive for
your specific application, call us at 1-800-888-8312.
Get on board with WELD-ON® Adhesives and CementsACRYLICS
3 Clear 1 1.30 2 Water-Thin
4 Clear 1 1.12 2 Water-Thin
16 Clear 1 1.11 2 800
28 Clear 3 1.03 1 3,400
40 Clear 2 1.03 1* 2,900
42 Clear 2 1.03 1* 2,900
1802 Clear 1 0.89 3 300
VINYLS
66 Clear 1 0.85 3 260
1001 Clear 1 0.94 3 500
1007 Clear 1 0.91 3 110
1909 Clear 1 0.90 3 500
1910 Clear 1 0.92 3 2,100
2007 Clear 1 0.85 3 Water-Thin
4007 Clear 1 0.93 3 800
4052 Amber** 1 0.94 3 500
4784 Clear 1 0.90 3 335
4909 Clear 1 0.94 3 900
ABS
1707 Milky 1 0.87 3 900
2354 Clear 1 0.81 3 Water-Thin
4707 Milky 1 0.88 3 4,000
POLYCARBONATE
55 Clear 2 1.14 1 4,000
58 Clear 2 1.14 1 4,000
STYRENE
4807 Milky 1 0.88 3 600
STRUCTURAL
10 White 2 1.03 1 40,000
45 Tan 2 1.05 1 500,000
811 White 2 1.05 1.5 40,000
GENERAL PURPOSE and SPECIAL APPLICATIONS
57 Blue 1 0.81 3 Water-Thin
1829 Tan 1 0.86 2 1,750
3061 Clear 1 0.94 2 Water-Thin
WELD-ON®
NUMBER COLORNUMBER OF
COMPONENTSTYPICAL SPECIFIC
GRAVITYTYPICAL VISCOSITY
(cps)
MINIMUMEXPECTEDSHELF LIFE@ 73ºF (yr)
TYPICAL PROPERTIES OF WELD-ON® ADHESIVES AND CEMENTS
* Refrigeration is recommended to increase shelf life.** Thin layer of solvent cement on substrate appears clear when dry.
Work with WELD-ON® by IPS ® Corporation the Leader in Adhesive Technology
Now, you no longer need to worry about which
adhesive will make the strongest, most attractive
finished products. Whether your application calls for
strength, weather resistance, clear seams or quick
set, IPS Corporation has the right WELD-ON adhesive
to fit your needs.
We offer the most complete line of solvent cements
and adhesives for use with acrylics, vinyls,
polycarbonate, PETG and other plastics, as well as
with non-plastic materials. And because choosing the
right adhesive can be difficult, we offer technical
support, samples and comprehensive product literature
to assist you in making your selection.
This brochure will introduce you to our plastic cements
and adhesives. If you need more information, please
give us a call at 1-800-888-8312.
ABS Acry
licCe
ll Ca
stAc
rylic
Cros
s-Li
nked
Acry
licEx
trude
d
Buty
rate
Conc
rete
Fibe
rgla
ss
Met
al
PETG
Polyc
arbo
nate
Polye
ster
Polyu
reth
ane
PVC
(Rig
id)
PVC
(Fle
xible
)PV
C (F
oam
ed)
Styr
ene
Woo
d
WELD-ON® INDUSTRIAL ASSEMBLY ADHESIVE SELECTION GUIDE
ABS
AcrylicCell Cast
AcrylicCross-Linked
AcrylicExtruded
Butyrate
Concrete
Fiberglass
Metal
PETG
Polycarbonate
Polyester
Polyurethane
PVC (Rigid)
PVC (Flexible)
PVC (Foamed)
Styrene
Wood
2354 16 10 16 16 10 10 45 16 16 40/42 66 10 45 16 16 451707/4707 1802 40/42 1802 55/58 45 45 10 55/58 55/58 10 4784 16/4052 40/42 1802
55/58 40/42 40/42 40/42 40/42 40/42 55/58 45 45
16 40/42 10 40/42 16 10 10 10 10 16 40/42 66 40/42 45 16 16 451802 3/4 40/42 3/4 40/42 45 45 45 40/42 40/42 10 4784 16 40/42 405240/42 16 16 45 16 45 4052 45 10
10 10 10 10 40/42 10 10 10 10 10 40/42 40/42 10 45 40/42 10 1040/42 40/42 40/42 40/42 10 45 45 45 40/42 40/42 10 10 40/42 45 40/42 45
45 45 45 45
16 40/42 10 40/42 16 10 10 10 10 10 40/42 66 40/42 45 16 16 451802 3/4 40/42 3/4 40/42 45 45 45 40/42 40/42 10 4784 16 40/42 405240/42 16 16 45 16 45 4052 45 10
16 16 40/42 16 3/2007 10 10 45 16 16 40/42 66 16 66 66 1802 4555/58 40/42 10 40/42 16 45 45 10 55/58 55/58 10 4784 55/58 4784 40/42 16 10
45/40/42 45 45 45 55/58 40/42 40/42 45 55/58 40/42 45 45 45
10 10 10 10 10 10 10 10 10 10 10 10 10 45 10 10 1045 45 45 45 45 45 45 45 45 45 45 45 45 45 45
10 10 10 10 10 10 10 10 10 10 10 10 10 45 10 10 1045 45 45 45 45 45 45 45 45 45 45 45 45 45 45
45 10 10 10 45 10 10 10 10 10 10 10 10 45 45 10 1010 45 45 45 10 45 45 45 45 45 45 45 10 45 45
16 10 10 10 16 10 10 10 55/58 55/58 40/42 10 10 45 16 16 45 55/58 40/42 40/42 40/42 55/58 45 45 45 3/4 40/42 45 40/42 40/42 1040/42 16 45 16 40/42 40/42 45 16 45
16 16 10 10 16 10 10 10 55/58 55/58 40/42 10 40/42 45 16 10 4555/58 40/42 40/42 40/42 55/58 45 45 45 40/42 3/4 10 10 40/42 1640/42 45 45 45 40/42 45 16 45 16 45 1802
40/42 40/42 40/42 40/42 40/42 10 10 10 40/42 40/42 40/42 10 40/42 45 10 40/42 1010 10 10 10 10 45 45 45 45 10 10 1829 10 40/42 10 1829
45 45 45 45
66 66 40/42 66 66 10 10 10 10 10 10 66 66 66 66 10 454784 4784 10 4784 4784 1829 4784 4784 4784 4784 4555/58 55/58 55/58 45
10 40/42 10 40/42 16 10 10 10 10 40/42 40/42 66 2007 2007 16 10 4516/4052 16 40/42 16 55/58 45 45 45 40/42 10 10 4784 10/40/42 45 2007 16
45 4052 45 4052 40/42 16 16 1007/4007 40/42/45 1802
45 45 45 45 66 45 45 45 45 45 45 66 2007 2007 2007 2007 454784 4784 45 66/4784 45 4545 45 45
16 16 40/42 16 16 10 10 45 16 16 10 66 16 2007 2007 1802 4540/42 40/42 45 40/42 40/42 45 45 10 40/42 40/42 40/42 4784 2007 45 16 16 10
45 45 45 45 45 45 45 40/42/45 40/42/45 45
16 16 10 16 1802 10 10 10 16 10 40/42 10 10 2007 1802 4807 451802 4052 40/42 4052 16 45 45 45 10 16 10 45 16 45 16 16
10 10 45 1802 1802 45 1802
45 45 10 45 45 10 10 10 45 45 10 45 45 45 45 45 4545 10 45 45 45 1829 10
• No hand mixing
• Reduces fabrication time
• Eliminates waste
• Reduces odors
• Lower volatile emissions
• Bonds most plastics & metals
• Consistent high strength bonds
INDUSTRIAL
ASSEMBLY
ADHESIVE
PRODUCT &
SELECTION
GUIDE
INDUSTRIAL
ASSEMBLY
ADHESIVE
PRODUCT &
SELECTION
GUIDE
Set Sail with the Industry Leader in AdhesivesSet Sail with the Industry Leader in Adhesives
455 W. Victoria StreetCompton, CA 90220 USA
Toll-free 800-888 -8312
Tel: 310-898-3300 • Fax: 310-898-3392
Website: www.ipscorp.com
E-Mail: [email protected]
WELD-ON® products by IPS® Corporation
are intended for use by skilled individuals.
We urge users to verify by tests that these
products, as well as the recommended
methods, are suitable for the materials being
used in their application. Product bulletins,
Material Safety Data Sheets and product label
information should be read before using our
adhesives. We will gladly supply you with
appropriate sample material for any product.
©IP
S
12
-20
07
Lit
. #
23
01
21