SPANNERS - COMBINATIONGROUP
582Short Arm Ratchet Combination Spanners
Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easyto clean. Conforms to ANSI 8107.6.
Short Arm Combination Spanners Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion-resistant and easyto clean. The jaws and ring are offset at 15° for easier location and application of torque to the fastener. Suitable for use in areas of very restricted access. Conforms to ASME B107.6.
Size Overall Weight Order CodeInch Length each KEN-582
3/8” 97 045g -2180K7/16” 113 085g -2181K1/2” 108 070g -2182K9/16” 114 85g -2183K5/8” 120 110g -2184K
11/16” 127 120g -2185K3/4” 135 155g -2186K
AF
MetricSize Overall Weight Order Code(mm) Length each KEN-58210 95 40g -2188K11 100 50g -2189K12 103 55g -2190K13 106 60g -2191K14 114 75g -2192K15 117 90g -2193K16 120 100g -2194K17 127 120g -2195K19 138 155g -2197K
WALL DRIVE
Sets 9 Piece Metric: 10, 11, 12, 13, 14, 15, 16, 17 and 19mm.7 Piece AF:3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” and 3/4”.
Number Weight Order Codeof Pieces each KEN-5829 Metric 1880g -2236K
7 AF 770g -2228K
MetricSize Overall Weight Order Code(mm) Length each KEN-58210 97 30g -2200K11 100 40g -2202K12 105 43g -2204K13 110 51g -2206K14 114 65g -2208K15 119 75g -2210K16 124 85g -2212K17 130 95g -2214K18 133 110g -2216K19 140 130g -2218K
Set10 Piece Metric: 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
Number Weight Order Codeof Pieces each KEN-58210 Metric 840g -2225K
Page487
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
10PIECES
GROUP
582 SPANNERS - COMBINATION
Professional Combination Spanners
Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spannermaking for easier cleaning and preventing rust. Long reach, wall drive. Conform with ANSE B107.6.
Size Overall Weight Order Code(AF) Length each KEN-582
11/32” 143 32g -3239K1/4” 130 26g -3240K5/16” 148 35g -3250K3/8” 167 53g -3260K7/16” 186 70g -3270K1/2” 207 88g -3280K9/16” 223 119g -3290K5/8” 243 145g -3300K
11/16” 261 179g -3310K3/4” 280 220g -3320K
13/16” 297 296g -3330K7/8” 320 350g -3340K
15/16” 340 435g -3350K1” 355 510g -3360K
AF
MetricSize Overall Weight Order Code(mm) Length each KEN-582
6 130 26g -3060K7 136 30g -3070K8 148 35g -3080K9 167 53g -3090K
10 172 57g -3100K11 186 70g -3110K12 197 80g -3120K13 207 88g -3130K14 223 119g -3140K15 233 133g -3150K16 243 145g -3160K17 261 179g -3170K18 270 199g -3180K19 280 220g -3190K20 290 323g -3200K21 301 323g -3210K22 318 361g -3220K23 315 359g -3225K24 315 436g -3230K25 355 549g -3231K26 355 525g -3232K27 370 613g -3233K28 375 596g -3234K29 410 682g -3235K30 410 766g -3236K32 435 880g -3237K
Sets14 Piece Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18and 19mm.14* Piece Metric: 6, 8, 9, 10, 13, 14, 15, 17, 19, 22, 24, 27, 30and 32mm.18 Piece Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14,15, 16, 17, 18, 19,20, 21, 22, and 24mm.26 Piece Metric: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30 and 32mm.9 Piece AF: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” and 3/4”.13 Piece AF: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”,7/8”, 15/16” and 1”.
Number Weight Order Codeof Pieces each KEN-582
14 Metric* 1.65kg -3960K14* Metric -3972K18 Metric 2.85kg -3970K26 Metric -3974K
9 AF 1.00kg -3920K13 AF 1.95kg -3930K
Fig.1 shows the point loads that occur with standard contactwrenches. Fig.2 shows the increased surface contact area loads of wrencheswith wall drive feature. The increased contact surface areahas three main advantages: helpsto reduce stress to the tool,prolonging tool life. Increases thetightening torque transmissionforce that can be applied tofasteners.Prevents fastener damage,e.g.‘rounding off’.
Wall Drive Ring End FeatureThe wall drive ring end feature has no points on the internalbi-hexagon ring end. This is achieved by a series of radii thatgives a wavy look to the internalbi-hexagon ring end.The internal radii design promotesthe use of higher torque loads tobe applied to the fastenerthrough increased surfacecontact areas.
Fig.1 Fig.2
Page488
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
SPANNERS - COMBINATIONGROUP
582
Size Overall Weight Order CodeWhit Length each KEN-5821/8” 140 30g -3370K3/16” 160 50g -3380K1/4” 180 65g -3390K5/16” 200 97g -3400K3/8” 220 150g -3410K7/16” 250 200g -3420K1/2” 280 228g -3430K9/16”* 332 430g -3440K5/8”* 380 690g -3450K
11/16”* 418 885g -3460K3/4”* 461 850g -3470K7/8”* 486 930g -3480K
AFMetric
Whitworth
Size Overall Weight Order Code(mm) Length each KEN-582
5.5 93 10g -2560K6 100 14g -2570K7 110 18g -2580K8 120 27g -2590K9 130 33g -2600K
10 140 36g -2610K11 150 47g -2630K12 160 55g -2640K13 170 66g -2660K14 180 82g -2670K15 190 90g -2680K16 200 107g -2690K17 210 130g -2700K18 220 138g -2710K19 230 159g -2720K20 240 185g -2730K21 250 193g -2740K22 260 225g -2750K23 260 265g -2760K24 280 294g -2770K25 295 330g -2780K26 295 435g -2790K27 310 387g -2800K28 340 675g -2810K29 340 1280g -2850K30 340 675g -2820K32 360 485g -2830K36 410 600g -2840K38 430 1280g -2860K41 460 1800g -2870K46 500 1900g -2880K50 540 2350g -2890K55 560 -2891K60 600 -2892K65 675 -2893K70 675 -2894K75 720 -2895K80 720 -2896K
Size Overall Weight Order Code(AF) Length each KEN-5821/4” 100 14g -2260K5/16” 120 27g -2270K3/8” 140 33g -2280K7/16” 150 47g -2290K1/2” 170 66g -2300K9/16” 180 82g -2310K5/8” 200 107g -2320K
11/16” 210 138g -2340K3/4” 230 159g -2350K7/8” 260 225g -2360K
13/16” 250 268g -2370K15/16” 280 294g -2380K1” 295 330g -2390K11/16”* 358 540g -2400K11/8”* 380 675g -2410K11/4”* 418 820g -2420K15/16”* 461 972g -2430K13/8”* 461 972g -2440K17/16”* 486 1280g -2450K11/2”* 486 1280g -2460K15/8”* 540 1800g -2470K13/4”* 611 1900g -2480K17/8”* 611 2350g -2490K2”* 611 2350g -2500K
Manufactured from chrome vanadium steel(except * which is made from drop forgedcarbon steel) with a satin finish body andhighly polished heads.
Industrial Combination Spanners
Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15° open jaw angle to shank and ring end offset. Conform to: 5.5mm - 25mm, 1/4” - 1” AF - DIN 3113. 26mm - 50mm, 11/16” - 2”AF - ASME B107.6.1/8” - 1/2” Whitworth - DIN 3113 & BS192:1982. 9/16” - 7/8” Whitworth - ASME B107.6 & BS192:1982.
Industrial Offset Combination SpannersChrome vanadium steel. 15° cranked open end. Offset ring end. Up to 25% longer than conventional DIN 3113combination spanners. Conform to DIN 3113B.
Set14 Piece Metric: 6, 7, 8, 9,10, 11, 12,13, 14, 15,16, 17, 18,and 19mm.
MetricSize Overall Weight Order Code(mm) Length each KEN-582
6 127 20g -3880K7 135 25g -3881K8 145 35g -3882K9 155 40g -3883K
10 167 50g -3884K11 173 55g -3885K12 180 65g -3886K13 195 80g -3887K14 210 95g -3888K15 215 110g -3889K16 230 135g -3890K17 240 160g -3891K18 255 170g -3892K19 265 190g -3893K21 280 240g -3894K22 300 275g -3895K24 320 350g -3896K27 340 565g -3897K30 360 665g -3878K32 380 821g -3879K
No. of Weight Order CodePieces each KEN-582
14 Metric 1.50kg -3898K
Page489
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Sets:11 Piece: 26, 27, 28, 29, 30, 32, 36, 38,41, 46 and 50mm14 Piece: 6, 8, 9, 10, 13, 14, 15, 17, 19,22, 24, 27, 30 and 32mm.14* Piece: 6, 7, 8, 9, 10, 11, 12, 13, 14,15, 16, 17, 18 and 19mm.18 Piece: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 20, 21, 22 and 24mm.26 Piece: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26,27, 28, 29, 30 and 32mm.9 Piece AF: 1/4F, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”and 3/4”11 Piece AF: *1 1/16”, *1 1/8”, *1 1/4”, *1 5/16”, *1 3/8”, *1 7/16”, *1 1/2”, *1 5/8”,*1 3/4”, *1 7/8” and *2”.12 Piece: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”,5/8”, 11/16”, 3/4”, 7/8”, 15/16” and 1”.7 Piece Whitworth: 1/8”, 3/16”, 1/4”, 5/16”,3/8”, 7/16” and 1/2”.
14PIECES
Number Weight Order Codeof Pieces each KEN-582
11 Metric 25.7kg -2980K14 Metric -2900K14* Metric 1.20kg -2960K18 Metric 2.20kg -2970K26 Metric -2910K09 AF 0.80kg -2920K11 AF 26.3kg -2940K12 AF 1.80kg -2930K7 Whitworth 0.95kg -2950K
GROUP
582 SPANNERS - COMBINATION & RING
Size Overall Weight Order Code(mm) Length each YMT-582
6 100 14g -2570K7 110 18g -2580K8 120 27g -2590K9 130 33g -2600K
10 140 36g -2610K11 150 47g -2630K12 160 55g -2640K13 170 66g -2660K14 180 82g -2670K15 190 90g -2680K16 200 107g -2690K17 210 130g -2700K18 220 138g -2710K19 230 159g -2720K
Set14 Piece Metric:6, 7, 8, 9, 10,11, 12, 13, 14,15, 16, 17, 18,and 19mm.
Number Weight Order Codeof Pieces each YMT-58214 Metric 1.60kg -2960K
Set14 Piece Metric:6, 7, 8, 9, 10,11, 12, 13, 14,15, 16, 17, 18and 19mm.
Size Overall Weight Order Code(mm) Length each SEN-582
6 100 10g -2570K7 110 14g -2580K8 120 18g -2590K9 130 33g -2600K
10 140 36g -2610K11 150 47g -2630K12 160 55g -2640K13 170 66g -2660K14 180 82g -2670K15 190 90g -2680K16 200 107g -2690K17 210 130g -2700K18 220 138g -2710K19 230 159g -2720K
Number Weight Order Codeof Pieces each SEN-58214 Metric 1.30kg -2960K
Combination Spanners
Manufactured from drop forged steel with 15° crankedheads. Conform to ASME B107.6.
Industrial Combination Spanners
Made from chrome vanadium steel with polished headand 15° offset. Conform to ASME B107.6.
Page490
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
4-In-1 Reversible Ratchet Spanners Double ended ratchet spanners with four sizes each, saving spaceand weight in the toolbox. 72 teeth lever ratcheting system thatrequires only 5° movement to operate, making them ideal for use intight areas. Made from high quality chrome vanadium steel withmirror polish finish to prevent oil and dirt from adhering to the spanner.
MetricSize Overall Weight Order Code
Range (mm) Length each KEN-5828 - 13 160 97g -6852K9 - 15 180 125g -6854K
16 - 19 230 263g -6856K
12-In-1 Reversible Ratchet Spanners
Double ended ratchet spanners with 12 sizes each.These spanners fit mm, inch and E-TORX fastenerssaving space and weight in the toolbox. The 72 teeth lever ratchetingsystem requires only 5° movement to operate making them ideal foruse in tight areas. Made from high quality chrome vanadium steelwith mirror polish finish to prevent oil and dirt from adhering to the spanner.
MetricSize Overall Weight Order Code
Range (mm) Length each KEN-5828 - 13 160 97g -6862K
14 - 19 230 263g -6864K
Number Weight Order Codeof Pieces each KEN-582
2 380g -6870K
Sizes (per Spanner): 8, 10, 11 and 13mm/5/16” 3/8” 7/16” and 1/2”/E10, E12, E14 and E16 14, 16, 17 and 19mm/9/16” 5/8” 11/16” 3/4”/E18, E20, E22 and E24.
2 Piece Set: One of each as above
3 Piece SetThe most commonly used 12 sizes in just three spanners, 8 - 19mm. Supplied with staorage roll.Sizes (per spanner): 8, 10, 12 and 13mm. 9, 11, 14 and 15mm. 16, 17, 18 and 19mm.
Number Weight Order Codeof Pieces each KEN-5823 Metric 510g -6860K
NEW
NEW
NEW
2PIECES
3PIECES
14PIECES
14PIECES
SPANNERS - RINGGROUP
582
Number Contents Weight Order Codeof Pieces each KEN-5824 E-Torx As above 440g -1240K
Set4 Piece E-Torx: E6 x E8, E10 x E12, E14 x E18 and E20 x E24mm
E-Torx®
Ring SpannersManufactured from drop forged chrome vanadium steel. Polished finish. Set is supplied in wallet with hanging holes.
Size Weight Order Codeeach KEN-582
E6 x E8 16g -1200KE10 x E12 38g -1210KE14 x E18 81g -1220KE20 x E24 156g -1230K
SetSee right for contents.
Page491
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Size Overall Weight Order Code(mm) Length each KEN-582
6* x 7* 115 65g -9742K8 x 9 135 80g -9743K
10 x 11 140 90g -9744K12 x 13 175 165g -9745K14 x 15 210 260g -9746K17 x 19 205 250g -9747K21 x 22 235 310g -9748K
Size Weight Order Code(AF) each KEN-582
1/4”* x 5/16” 60g -9752K3/8” x 7/16” 90g -9753K1/2” x 9/16” 170g -9754K5/8” x 11/16” 265g -9755K3/4” x 7/8” 300g -9756K
Reversible Ratchet Ring Wrenches
For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can beachieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.Straight
Sets Contents:7 Piece Metric:6 x 7, 8 x 9, 10 x 11, 12 x 13,14 x 15, 17 x 19 and 21 x 22mm.5 Piece AF:1/4" x 5/16", 3/8" x 7/16”, 1/2” x 9/16”,5/8” x 11/16” and 3/4” x 7/8”.
Sets7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 17 x 19 and 21 x 22mm5 Piece AF: 1/4" x 5/16", 3/8" x 7/16",1/2" x 9/16", 5/8" x 11/16" and 3/4" x 7/8"
AF
Metric *Single hexagon
Metric *Single hexagon
AF
25°° Offset
Size Overall Weight Order Code(mm) Length each KEN-582
6* x 7* 115 65g -9720K8 x 9 135 80g -9721K
10 x 11 140 90g -9722K12 x 13 175 170g -9723K14 x 15 210 270g -9724K17 x 19 210 260g -9725K21 x 22 240 305g -9726K
Size Weight Order Code(AF) each KEN-582
1/4”* x 5/16” 60g -9732K3/8” x 7/16” 90g -9733K1/2” x 9/16” 160g -9734K5/8” x 11/16” 270g -9735K3/4” x 7/8” 305g -9736K
Number Weight Order Codeof Pieces each KEN-5827 Metric 1300g -9730K
5 AF 930g -9740K
Number Weight Order Codeof Pieces each KEN-5827 Metric 1280g -9750K
5 AF 930g -9760K
4PIECES
Page492
SPANNERS - RINGGROUP
582H
AN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Double Ended Ring Spanners
Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838 Metric & AF, BS 192 : 1982 & BS 3555 : 1998 Whitworth.
Whitworth
AF
MetricSize Overall Weight Order Code(mm) Length each KEN-582
5.5 x 7 168 40g -1550K6 x 7 180 40g -1570K8 x 9 190 60g -1590K8 x 10 200 60g -1600K
10 x 11 205 87g -1610K10 x 13 220 120g -1620K12 x 13 220 120g -1640K13 x 17 270 190g -1660K14 x 15 235 152g -1670K16 x 17 250 186g -1680K17 x 19 270 240g -1690K18 x 19 270 240g -1700K19 x 22 290 350g -1710K19 x 24 330 380g -1720K20 x 22 290 320g -1730K21 x 23 315 400g -1740K22 x 24 330 368g -1750K24 x 26 335 465g -1760K24 x 27 340 465g -1770K24 x 30 362 495g -1780K25 x 28 360 545g -1790K27 x 30 380 638g -1800K30 x 32 380 638g -1810K30 x 36 420 820g -1820K32 x 36 420 900g -1830K36 x 41 430 1100g -1840K41 x 46 440 1300g -1850K46 x 50 505 1570g -1860K55 x 60 635 4000g -1870K
Size Weight Order CodeAF each KEN-582
1/4” x 5/16” 60g -1260K5/16” x 3/8” 75g -1270K3/8” x 7/16” 94g -1280K
7/16” x 1/2” 124g -1290K1/2” x 9/16” 152g -1300K
9/16” x 5/8” 157g -1310K5/8” x 11/16” 218g -1320K
11/16” x 3/4” 250g -1340K3/4” x 7/8” 320g -1350K
13/16” x 7/8” 335g -1360K15/16” x 1” 465g -1380K11/16” x 11/4” 618g -1410K11/8” x 15/16” 640g -1420K
15/16” x 11/2” 810g -1450K17/16” x 15/8” 1000g -1460K
Number Weight Order Codeof Pieces each KEN-5827 Metric 1.20kg -1960K11 Metric 1.90kg -1970K
5 AF 0.92kg -1920K10 AF 2.00kg -1930K5 BSW 2.75kg -1950K
Sets7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.11 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm.5 Piece AF: 1/4” x 5/16”, 3/8” x 7/16”, 1/2” x 9/16”, 5/8” x 11/16” and 3/4” x 7/8”.10 Piece AF: 1/4” x 5/16”, 5/16” x 3/8”, 3/8” x 7/16”, 7/16” x 1/2”, 1/2” x 9/16”,9/16” x 5/8”, 5/8” x 11/16”, 11/16” x 3/4”, 3/4” x 7/8” and 15/16” x 1”.5 Piece BSW:3/16” x 1/4”,5/16” x 3/8”,7/16” x 1/2”,9/16” x 5/8” and11/16” x 3/4”BSW.
Ring Crescent Wrench Sets4 Piece Metric:10 x 11mm, 12 x 13mm, 14 x 15mm,17 x 19mm.
Size Weight Order CodeWhitworth each KEN-5823/16” x 1/4” 110g -2010K5/16” x 3/8” 200g -2030K7/16” x 1/2” 354g -2050K9/16” x 5/8” 490g -2070K
11/16” x 3/4” 660g -2100K7/8” x 1” 1150g -2120K
Size Overall Weight Order Code(mm) Length each KEN-582
10 x 11 142 71g -3766K12 x 13 164 100g -3768K14 x 15 189 157g -3770K17 x 19 219 172g -3772K
Ring Crescent WrenchesChrome vanadium steel with satin chrome finish. Heads conform to DIN 838.
Number Weight Order Codeof Pieces each KEN-582
4 Metric 540g -3776K
4PIECES
SPANNERS - RINGGROUP
582
Page493
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Number Weight Order Codeof Pieces each KEN-5826 Metric 710g -3650K
5 AF 620g -3659K
Industrial Flared Nut Ring Spanners
Conform to ASME B107.4. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc.
Professional Flared Nut Ring Spanners
Conform to: ASME B107.4. Made from chrome vanadium steel with a highly polished mirror finish. Made to AmericanFederal Standards, giving higher torque therefore improved performance. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc.
Metric Conform with ANSI B107.9M.
AF Conform with ANSI B107.6
Size Overall Weight Order Code(mm) Length each KEN-5828 x 10 145 45g -1020K9 x 11 145 45g -1030K
12 x 14 175 90g -1040K13 x 15 170 90g -1050K16 x 17 200 130g -1060K
Size Overall Weight Order Code(mm) Length each KEN-5826 x 8 135 38g -3490K8 x 10 135 38g -3500K9 x 11 155 54g -3510K
10 x 11 155 54g -3520K10 x 12 155 54g -3530K12 x 14 175 95g -3540K13 x 14 175 95g -3550K14 x 17 200 130g -3590K17 x 19 200 130g -3600K19 x 22 225 220g -3610K22 x 24 230 270g -3620K24 x 27 250 340g -3630K30 x 32 275 450g -3640K
AF Conform with ANSI B107.9.
Set6 Piece Metric:6 x 8, 9 x 11, 10 x 12, 13 x 14, 14 x 17 and 19 x 22mm.5 Piece AF:1/4” x 5/8”, 3/8” x 7/16”, 1/2” x 9/16”, 5/8” x 11/16” and 3/4” x 7/8”.
Number Weight Order Codeof Pieces each KEN-5825 Metric 420g -1090K
4 AF 270g -1170K
Metric Conform with ANSI B107.9M.
Size Weight Order Code(AF) each KEN-582
1/4” x 5/16” 38g -3651K3/8” x 7/16” 54g -3652K1/2” x 9/16” 95g -3653K5/8” x 11/16” 130g -3654K3/4” x 7/8” 220g -3655K
Set5 Piece Metric: 8 x 10, 9 x 11, 12 x 14, 13 x 15 and 16 x 17mm.4 Piece AF: 5/16” x 3/8”, 3/8” x 7/16”, 1/2” x 9/16” and 5/8” x 11/16”.
Size Overall Weight Order Code(AF) Length each KEN-582
5/16” x 3/8” 145 45g -1110K3/8” x 7/16” 155 60g -1120K1/2” x 9/16” 175 90g -1130K5/8” x 11/16” 198 130g -1140K
GROUP
582 SPANNERS - OPEN ENDED
Size Weight Order CodeAF each KEN-582
1/4” x 5/16” 25g -0260K5/16” x 3/8” 32g -0270K3/8” x 7/16” 48g -0280K
7/16” x 1/2” 63g -0290K1/2” x 9/16” 80g -0300K
9/16” x 5/8” 96g -0310K5/8” x 11/16” 120g -0320K5/8” x 3/4” 170g -0330K
11/16” x 3/4” 171g -0340K3/4” x 7/8” 198g -0350K
13/16” x 7/8” 220g -0360K7/8” x 15/16” 260g -0370K
15/16” x 1” 311g -0380K1” x 11/8” 405g -0400K
11/16” x 11/4” 460g -0410K11/8” x 15/16” 460g -0420K
13/16” x 15/16” 460g -0430K11/4” x 13/8” 692g -0450K
15/16” x 11/2” 692g -0460K*17/16” x 15/8” 1340g -0470K*11/2” x 15/8” 1340g -0480K
*111/16” x 17/8” 1782g -0490K*113/16” x 2” 2368g -0510K
Size Overall Weight Order Code(mm) Length each KEN-5824 x 5 103 12g -0530K5 x 5.5 103 15g -0540K
5.5 x 7 122 25g -0550K6 x 7 122 25g -0570K7 x 8 122 25g -0580K8 x 9 140 32g -0590K8 x 10 140 32g -0600K
10 x 11 156 48g -0610K10 x 12 156 48g -0612K10 x 13 172 63g -0620K11 x 13 172 63g -0630K12 x 13 172 63g -0640K12 x 14 172 63g -0644K13 x 15 186 100g -0650K13 x 17 188 96g -0660K14 x 15 188 96g -0670K14 x 17 188 96g -0677K16 x 17 204 120g -0680K17 x 19 220 171g -0690K18 x 19 220 171g -0700K19 x 21 234 198g -0709K19 x 22 234 198g -0710K19 x 24 234 198g -0720K20 x 22 234 198g -0730K21 x 23 247 200g -0740K22 x 24 247 200g -0750K24 x 26 266 311g -0760K24 x 27 266 311g -0770K24 x 30 285 405g -0780K25 x 28 285 405g -0790K30 x 32 302 460g -0810K27 x 30 302 460g -0820K27 x 32 302 460g -0830K30 x 36 319 692g -0840K32 x 36 319 692g -0850K
*36 x 41 434 1340g -0860K*41 x 46 465 1782g -0870K*46 x 50 495 2368g -0880K
Industrial Open Ended Spanners
Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polishedheads, with a 15° offset. DIN 3110: 4 x 5mm to 32 x 36mm, 1/4” x 5/16” to 15/16” x 15/8” AF.ASME B107.39: 36 x 41mm to 46 x 50mm, 17/16” x 15/8” to 113/16” x 2” AF.DIN 3110 & BS192:1982: 1/8” x 3/16” to 1” x 11/8” Whitworth.
WhitworthSize Weight Order Code
Whitworth each KEN-5821/8” x 3/16” 55g -0010K
3/16” x 1/4” 70g -0020K1/4” x 5/16” 90g -0030K
5/16” x 3/8” 120g -0040K3/8” x 7/16” 225g -0050K
7/16” x 1/2” 230g -0060K1/2” x 9/16” 325g -0070K
9/16” x 5/8” 385g -0090K9/16” x 11/16” 435g -0100K5/8” x 11/16” 490g -0110K5/8” x 3/4” 495g -0120K
11/16” x 3/4” 495g -0130K3/4” x 7/8” 740g -0140K7/8” x 1” 910g -0150K1” x 11/8” 1100g -0160K
AF
Metric
Number Weight Order Codeof Pieces each KEN-5827 Metric 0.64kg -0960K8 Metric 7.70kg -0990K11 Metric 1.90kg -0970K
5 AF 0.55kg -0920K10 AF 1.20kg -0930K8 Whit 1.50kg -0950K
Sets:7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and18 x 19mm.8 Piece Metric: 24 x 26, 25 x 28, 27 x 30, 27 x 32, 32 x 36, *36 x41, *41 x 46 and *46 x 50mm.11 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17,18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm.12 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17,18 x 19, 20 x 22, 21 x 23, 24 x 27, 25 x 28 and 30 x 32mm.5 Piece AF: 1/4” x 5/16”, 3/8” x 7/16”, 1/2” x 9/16”, 5/8” x 11/16” and 3/4” x7/8”.8 Piece AF: 1 x 11/8”, 11/16” x 11/4” 13/16” x 15/16”, 11/4” x 13/8”, 15/16”x 11/2”, *17/16” x 15/8”, *111/16” x 17/8” and *113/16” x 2”.10 Piece AF: 1/4” x 5/16”, 5/16” x 3/8”, 3/8” x 7/16”, 7/16” x 1/2”, 1/2” x 9/16”,9/16” x 5/8”, 5/8” x 11/16”, 11/16” x 3/4”, 3/4” x 7/8” and 15/16” x 1”.8 Piece Whitworth: 1/8” x 3/16”, 3/16” x 1/4”, 1/4” x 5/16”, 5/16” x 3/8”, 3/8” x7/16”, 7/16” x 1/2”, 1/2” x 9/16” and 9/16” x 5/8”.
Page494
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
SPANNERS - OPEN ENDEDGROUP
582
Size Overall Weight Order Code(mm) Length each YMT-5826 x 7 122 25g -0570K8 x 9 140 32g -0590K
10 x 11 156 48g -0610K12 x 13 172 63g -0640K14 x 15 188 96g -0670K16 x 17 204 120g -0680K18 x 19 220 171g -0700K
Number Weight Order Codeof Pieces each YMT-5827 Metric 0.85kg -0960K
Number Weight Order Codeof Pieces each SEN-5827 Metric 1.25kg -0960K
SetMetric 7 Piece6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.
Set7 Piece Metric:6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.
Industrial Open Ended Spanners
Made from chrome vanadium steel with polished head and 15° offset. Conform to ASME B107.39.
Metric
Size Overall Weight Order Code(mm) Length each SEN-5826 x 7 122 30g -0570K8 x 9 140 35g -0590K
10 x 11 156 50g -0610K12 x 13 172 95g -0640K14 x 15 188 120g -0670K16 x 17 204 180g -0680K18 x 19 220 205g -0700K
Metric
Open Ended Spanners
Drop forged steel with 15° cranked open ends. Conform to ASME B107.39.
Number Weight Order Codeof Pieces each KEN-5827 Metric 780g -3900K
12 Metric 2730g -3910K
Size Overall Weight Order Code(mm) Length each KEN-5826 x 7 126 25g -2990K8 x 9 135 45g -3000K
10 x 11 146 55g -3010K12 x 13 165 90g -3020K14 x 15 185 120g -3030K16 x 17 185 138g -3040K18 x 19 230 210g -3050K20 x 22 250 280g -3051K21 x 23 250 290g -3052K24 x 27 290 400g -3053K30 x 32 360 750g -3054K
Set7 Piece Metric:6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.12 Piece Metric:6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22,21 x 23, 24 x 27 & 30 x 32mm.
Professional Open Ended Spanners
Chrome vanadium steel with a highly polished mirror finish preventing oil and dirt from adhering to the spanner. Made to American Federal Standards, extra thick heads offer higher torque forces to be applied therefore improvedperformance. Conform to ASME B107.39
Page495
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
7PIECES
7PIECES
GROUP
582 SPANNERS - MINIATURE/SPANNER END FITTINGS
Miniature Open Ended Spanners
BA. Conform to BS 1842 : 1952.
Set6 Piece BA: 0 x 2, 1 x 3, 4 x 6, 5 x 7, 8 x 10, 9 x 11BA.6 Piece Metric: 3.2 x 4, 4 x 5, 5 x 5.5, 5.5 x 6, 6 x 7, 7 x 8mm
Metric. Conform to BS 192 : 1982 & DIN 3110.
Number Weight Order Codeof Pieces each KEN-582
6BA 90g -0910K6 Metric 90g -1010K
Size Overall Weight Order Code(mm) Length each KEN-5820 x 2 89 25g -0190K1 x 3 67 20g -0200K2 x 4 75 15g -0210K4 x 6 63 10g -0220K5 x 7 63 5g -0230K8 x 10 64 5g -0240K9 x 11 51 5g -0250K
Size Overall Weight Order Code(mm) Length each KEN-582
3.2 x 4 70 6g -1001K4 x 5 70 6g -1002K
5 x 5.5 80 11g -1003K5.5 x 6 80 11g -1004K6 x 7 80 10g -1005K7 x 8 90 15g -1006K
Crowfoot WrenchesChrome vanadium wrenches designed to be used forgetting into tight spots and hard to reach areas, in
particular around tubing such as hydraulic lines etc. For use with 3/8” square drive tools.
Number Weight Order Codeof Pieces each KEN-58210 Metric 610g -6300K
Set10 Piece Metric:10, 11, 12, 13, 14, 15, 17, 19, 22 and 24mm. Supplied on a sliding socket rail for storage.
Size (mm) Weight Order Code(c) (b) (a) each KEN-58210 22 9 20g -6280K11 25 9 25g -6281K12 28 9 33g -6282K13 28 9 33g -6283K14 33 9 37g -6284K15 33 9 46g -6285K17 38 9 60g -6287K19 43 10 72g -6289K22 47 10 94g -6292K24 53 10 117g -6294K
a
b c
Flexi-Ring End SocketsMade from polished chrome vanadium. These tough flexi-ringend sockets are designed to allow access over long studs andfor awkwardly positioned nuts and bolts. Swivels through 220°.
8 Piece Metric Set Contents:13, 14, 15, 16, 17, 19, 22, and 24mm. Supplied with a sturdy hanging rail.
Type SizeOverall Weight Order CodeLength each KEN-582
13mm 70mm 124g -1180K14mm 70mm 123g -1181K
Metric 15mm 70mm 121g -1182K16mm 70mm 119g -1183K17mm 77mm 158g -1184K19mm 77mm 152g -1185K22mm 82mm 193g -1186K24mm 86mm 213g -1187K
Number Contents Weight Order Codeof Pieces each KEN-582
8 As above 1.3kg -1190K
1/2
1/2
3/8
Number Contents Weight Order Codeof Pieces each KEN-582
11 As above 440g -3780K
Ignition Wrench Kit
11 Piece Set Contents: 8 open end spanners 4 - 7.5mm x 0.5mm increments, screwdriver, file, 0.40mm gap gauge.
Page496
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
NEW
11PIECES 10
PIECES
6PIECES
8PIECES
SPANNER - RING/WRENCHESGROUP
582
Type Weight Order Codeeach KEN-582
Strap 280g -9500KChain 430g -9520K
Strap & Chain WrenchesUsed for gripping round and irregular shaped items, tubes and piping. Ideal for oil filters,hot radiator caps and hub caps. Both types suitable for 60 - 140mm diameters.Strap Type: Hardened chrome vanadium handle with industrial strength, rubber strapthat will not mark or scratch workpieces.Chain Type: Hardened chrome vanadium handle with heavyduty chain for a positive grip.
Size Overall Weight Order Code(mm) Length each KEN-582
8 260 200g -9650K9 260 220g -9660K
10 260 220g -9670K11 260 220g -9680K12 260 400g -9690K13 310 410g -9700K14 310 410g -9710K
Diameter Weight Order Codeeach KEN-582
3/4 - 2” 120g -9600K11/4 - 3” 250g -9610K
2 - 43/4” 460g -9620K
Swivel End Socket Wrenches
Designed to give greater flexibility and improved access when working in difficult conditions. Bi-hexagon (12 point).Manufactured from fully polished chrome vanadium steel. Conform with ANSI B107.5M.
Set6 Piece Bi-hexagon: 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.
SetSee left for contents.Number Weight Order Code
of Pieces each KEN-5826 1.40kg -3725K
Size Overall Weight Order Code(mm) Length each KEN-5828 x 9 175 135g -3670K
10 x 11 185 135g -3680K12 x 13 196 150g -3690K14 x 15 220 200g -3700K16 x 17 240 245g -3710K18 x 19 265 295g -3720K
Page497
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Adjustable ‘C’ Hook SpannersManufactured from chrome vanadium steel with a highly polished chrome plated finish.
T-TypeWrenches
For use in restricted areas. Ideally suited to changing spark plugs asthe one piece design ensures that no socket or extension bar canbecome stuck on the plug or drop into the engine compartment.Single hex. Manufactured from chrome vanadium steel.
6PIECES
Push Through Steel Handles
Chrome - molybdenum with mirror polished finish. Push through square drive, needs only 3% movement to operate ratchet.
GROUP
582 SOCKETS & ACCESSORIES - 1/4” SQUARE DRIVE
Overall Number Weight Order CodeLength of Teeth each KEN-582140mm 72 90g -4005K
Overall Number Weight Order CodeLength of Teeth each KEN-582143mm 72 120g -4015K
Type Overall Weight Order CodeLength each KEN-582
Standard 125mm 120g -4025KStubby 75mm 70g -4028K
Lever Reversible Rubber HandleChrome vanadium. Rubber grip, 72 tooth ratchet. With thumblever for reversing without having to remove the socket or
accessory. With quick release. A high quality wrench for the professional user.
Lever Reversible Steel HandleFully chromed all steel handle with thumb lever for reversingwithout having to remove the socket or accessory.
Ratchet Repair Kits
Overall Number Weight Order CodeLength of Teeth each KEN-582140 20 170g -4020K
Disc Type Steel Handle
Standard wrench with high polished finish. Fitted with spring loaded ball bearing socket retainer.
Manufactured from chrome vanadium steel.
Overall Number Weight Order CodeLength of Teeth each SEN-582145 40 120g -4000K
Lever ReversibleRubber Handle
40 tooth chrome vanadium quick release ratchetwith rubber grip, thumb lever for reversing without
having to remove the socket or accessory.
Swivel Handle The hinged link allows operation at varied angles to aid accessin restricted areas. Knurled grip.
Overall Weight Order CodeLength each KEN-582150mm 125g -4180K
To suit Weight Order CodeRatchet Number each KEN-582
KEN-582-4020K 30g -4280KKEN-582-4005K/4015K 30g -4290K
1/4
1/4
1/4
1/4
Overall Weight Order CodeLength each KEN-582105mm 50g -4040K
Sliding ‘T’ HandleManufactured from high quality chrome vanadium with a fullypolished finish. The sliding bar will give many options for
leverage within a given space.
1/4
1/4
1/4
Page498
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Extension BarsManufactured from high quality chromevanadium with a fully polished finish.
All with knurled ‘finger grip’.
Standard WobbleIn areas where clearance may be a problemthe ‘wobble’ square drive can be used at anangle of up to 15°.
Flexible Steel wire braid allows access intoobstructed areas.
Overall Weight Order CodeLength each KEN-58250mm 25g -4060K
100mm 50g -4080K150mm 70g -4100K250mm 115g -4120K
Overall Weight Order CodeLength each KEN-582150mm 150g -4140K
Overall Weight Order CodeLength each KEN-58250mm 25g -4070K
100mm 50g -4090K150mm 70g -4110K250mm 115g -4130K
1/4
SOCKETS & ACCESSORIES - 1/4” SQUARE DRIVEGROUP
582
Universal JointHinged through 180° in both directions.Knurled for extra grip.
Drive male x female: 1/4” x 1/4”.
Double Ended LugFor connecting two female square drives.
Drive ConverterFor using a combination of square drivesockets in one application.
Adaptors/ConvertersChrome vanadium.
Hex Bit AdaptorConverts square drive tooling to use hexagonbits.
Overall Weight Order CodeLength each KEN-58240mm 30g -4160K
1/4
1/4
Square Drive Overall Order Codex Hex Length KEN-582
1/4” x 1/4” 25mm -4230K
Drive Overall Order CodeFemale x Male Length KEN-582
1/4” x 3/8” 27mm -4220K3/8” x 1/4” 37mm -5180K
Page499
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Type Size Order Code(mm) KEN-582
Slotted 4.0mm -4700K5.5mm -4710K7.0mm -4730K
CrossNo.1 -4750K
Point No.2 -4760KNo.3 -4770KNo.4 -4780K
3.0mm -4790K4.0mm -4800K5.0mm -4810K6.0mm -4820K
Hexagon 8.0mm -4830K1/8” -4840K
5/32” -4850K3/16” -4860K7/32” -4870K1/4” -4880K
5/16” -4890KT6 -4685KT7 -4686KT8 -4687KT9 -4688K
Torx T10 -4689KT15 -4690KT20 -4691KT25 -4692KT27 -4693KT30 -4694KT40 -4695K
Size Overall Weight Order Code(mm) Length each KEN-582
AF3/16” 25mm 10g -4450K7/32” 25mm 10g -4460K1/4” 25mm 10g -4470K
9/32” 25mm 20g -4480K5/16” 25mm 20g -4490K
11/32” 25mm 20g -4500K3/8” 25mm 30g -4510K
7/16” 25mm 30g -4520K1/2” 25mm 30g -4530K
9/16” 25mm 30g -4532KAF (Single Hex)
3/16” 25mm 10g -4430K7/32” 25mm 10g -4431K1/4” 25mm 10g -4432K
9/32” 25mm 20g -4433K5/16” 25mm 20g -4434K
11/32” 25mm 20g -4435K3/8” 25mm 30g -4436K
7/16” 25mm 30g -4437K1/2” 25mm 30g -4438K
9/16” 25mm 30g -4439KAF (Deep)
3/16” 50mm 10g -4580K7/32” 50mm 10g -4581K1/4” 50mm 10g -4582K
9/32” 50mm 10g -4583K5/16” 50mm 10g -4584K
11/32” 50mm 20g -4585K3/8” 50mm 20g -4586K
7/16” 50mm 30g -4588K1/2” 50mm 50g -4590K
9/16” 50mm 40g -4592KAF (Single Hex Deep)
3/16” 50mm 10g -4555K7/32” 50mm 10g -4556K1/4” 50mm 10g -4557K
9/32” 50mm 10g -4558K5/16” 50mm 10g -4559K
11/32” 50mm 20g -4560K3/8” 50mm 20g -4561K
7/16” 50mm 30g -4562K1/2” 50mm 50g -4563K
9/16” 50mm 40g -4564K*Single Hex BA
0 25mm 30g -4600K*1 25mm 30g -4610K2 25mm 20g -4620K3 25mm 20g -4630K4 25mm 20g -4640K
*5 25mm 10g -4650K*6 25mm 10g -4660K
Size Overall Weight Order Code(mm) Length each KEN-582
Metric4.0 25mm 10g -4300K4.5 25mm 10g -4310K5.0 25mm 10g -4320K5.5 25mm 10g -4330K6.0 25mm 10g -4340K7.0 25mm 20g -4350K8.0 25mm 20g -4360K9.0 25mm 20g -4370K
10.0 25mm 20g -4380K11.0 25mm 30g -4390K12.0 25mm 30g -4400K13.0 25mm 30g -4410K14.0 25mm 40g -4420K
Metric (Single Hex)4.0 25mm 10g -4540K5.0 25mm 10g -4542K5.5 25mm 10g -4543K6.0 25mm 10g -4544K7.0 25mm 20g -4545K8.0 25mm 20g -4546K9.0 25mm 20g -4547K
10.0 25mm 20g -4548K11.0 25mm 30g -4549K12.0 25mm 30g -4550K13.0 25mm 30g -4551K14.0 25mm 40g -4552K
Metric (Deep)4.0 50mm 10g -4670K4.5 50mm 10g -4671K5.0 50mm 10g -4672K5.5 50mm 10g -4673K6.0 50mm 10g -4674K7.0 50mm 20g -4675K8.0 50mm 20g -4676K9.0 50mm 20g -4677K
10.0 50mm 20g -4678K11.0 50mm 30g -4679K12.0 50mm 30g -4680K13.0 50mm 30g -4681K14.0 50mm 40g -4682K
Metric (Single Hex Deep)6.0 50mm 10g -4566K7.0 50mm 10g -4567K8.0 50mm 10g -4568K9.5 50mm 10g -4569K
10.0 50mm 10g -4570K11.0 50mm 20g -4571K12.0 50mm 20g -4572K13.0 50mm 20g -4573K14.0 50mm 40g -4574K
1/4
1/4
Screwdriver BitsManufactured from highquality chrome vanadium,
fully polished finish. Conform to DIN. Overall length:37mm.Bit length:19mm.
Bi-Hexagon Sockets
Ideal for assembly and servicing of small precision mechanisms associated withelectrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.
Double knurl feature gives a high grip which is essential for a quick tool change whenyour hands are greasy/oily. The 12 point bi-hexagon side drive design will give a highertorque than normal sockets. Manufactured from chrome vanadium, fully chrome
plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.
1/4
Spinner HandlesFixed Type: Chrome vanadium bladewith spring loaded ball bearing socket
retainer. Overall length: 150mm.
1/4
Handle Order CodeType KEN-582
Bi-Material -4190KPolypropelene -4200K
Drive Overall Order CodeFemale x Male Length KEN-582
1/4” x 1/4” 25mm -4240K
GROUP
582 SOCKETS & ACCESSORIES - 3/8” SQUARE DRIVE
Grip Overall Weight Order CodeLength each KEN-582
Knurled 225mm 310g -5060KRubber 225mm 225g -5160K
-5060K
-5160K
Grip Overall Weight Order CodeLength each KEN-582
American 225mm 310g -5065KComponents
Replacement Knuckle -5068K
Swivel HandlesThe hinged link allows operation at varied angles to aid accessin restricted areas.
Swivel HandleHeavy Duty American Pattern
American grip heavy duty swivel handle.Manufactured from chrome vanadium steel with a
corrosion resistant high polished finish.
3/8
3/8 SwivelHandle
Chrome finish. American style handle.
Overall Weight Order CodeLength each YMT-582225mm 310g -5060K
3/8
Page500
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
3/8
Lever Reversible Rubber Handle
With thumb lever for reversing without having toremove the socket or accessory.
Highly polished chrome vanadium with rubber grip.
Overall Number Weight Order CodeLength of Teeth each SEN-582200mm 40 345g -4940K
Clutch Type Drive Push Through Steel HandlesChrome - molybdenum with mirror polished finish. Clutch typedrive action Push through square drive, needs only
3% movement to operate ratchet.
Ratchet Repair Kits
Type Overall Weight Order CodeLength each KEN-582
Standard 180mm 220g -4945KStubby 105mm 120g -4948K
3/8
To suit Ratchet Number Weight Order Codeeach KEN-582
KEN-582-4900K 70g -5220KKEN-582-4932/4942K 70g -5215K
KEN-582-4940K 70g -5235K
Disc Type Steel Handle
Basic wrench with high polished finish. Fitted with spring loaded ball bearing socket retainer.
Overall Number of Weight Order CodeLength Teeth each KEN-582200mm 41 205g -4930K
Push Through Rubber Handle
A very economic wrench with a one way ratchet. Push throughsquare drive allows left and right hand operation.
Overall Number Weight Order CodeLength of Teeth each KEN-582200mm 42 380g -4900K
3/8
3/8
Quick Release Ratchet Handle
With thumb lever for reversing without having to remove the socket or accessory. Highly polished chrome vanadium with rubber grip.
Overall Number Weight Order CodeLength of Teeth each YMT-582200mm 72 345g -4942K
3/8
Lever Reversible Rubber HandleChrome vanadium. Rubber grip, 72 tooth ratchet.With thumb lever for reversing without having to
remove the socket or accessory. With quick release. A high quality wrench for the professional user.
Overall Number Weight Order CodeLength of Teeth each KEN-582200mm 72 215g -4942K
3/8
Lever Reversible Steel Handle Fully chromed all steel handle with thumb lever for reversingwithout having to remove the socket or accessory.
Overall Number Weight Order CodeLength of Teeth each KEN-582200mm 72 205g -4932K
3/8
SOCKETS & ACCESSORIES - 3/8” SQUARE DRIVEGROUP
582
Overall Number of Weight Order CodeLength Teeth each YMT-582200mm 72 235g -7510K
Composite Ratchet Handle
Quality composite revesible ratchet handle withreverse lever, push button quick release and an
offset handle to help eliminate knuckle scrapes. Manufactured fromcomposite material. 72-tooth gear drive for maximum power andchrome vanadium core for strength.
3/8
Page501
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Universal JointHigh polished chrome finish. Hinged through
180° in both directions.
Drive Overall Weight Order CodeMale x Female Length each YMT-582
3/8” x 3/8” 50mm 60g -5040K
Drive Overall Weight Order CodeMale x Female Length each KEN-582
3/8” x 3/8” 50mm 60g -5040K
Universal JointHinged through 180°in both directions.
Knurled for extra grip.
3/83/8
Rubber Grip KEN -582-5080K
Overall Weight Order CodeLength each KEN-582210mm 240g -5100K
Spinner Handle Fixed TypeChrome vanadium steel blade, polypropylene handle and spring loaded bearing socket retainer.
Overall Weight Order CodeLength each KEN-582165mm 185g -4920K
Speed Braces Manufactured from high quality chrome vanadium, fully polishedfinish. Ideal for nut spinning.
American PatternKEN- 582-5090K
American PatternKEN -582-5030K
Sliding ‘T’ HandleMade from high quality chrome vanadium with a fully polishedfinish. The sliding bar gives many options for leverage within
any space.
Grip Overall Weight Order CodeLength each KEN-582
American Pattern 425mm 500g -5090K470mm 410g -5030K
Rubber Grip 400mm 470g -5080K
3/8
3/8
3/8
Sliding ‘T’ Handle
Overall Weight Order CodeLength each YMT-582150mm 240g -5100K
Spinner Handle Fixed Type
Overall Weight Order CodeLength each YMT-582165mm 185g -4920K
3/8
3/8
ExtensionsChrome finish.3/8
Type Overall Weight Order Code OfferLength (mm) each YMT-582
Standard 75 75g -4960KStandard 150 145g -5000KWobble 250 235g -5140K
Overall Weight Order CodeLength each KEN-58275mm 80g -4960K
125mm 130g -4980K150mm 150g -5000K250mm 280g -5020K300mm 340g -5050K450mm 430g -5070K
Overall Weight Order CodeLength each KEN-58275mm 65g -5110K
150mm 120g -5120K250mm 260g -5140K
Overall Weight Order CodeLength each KEN-582300mm 15g -5150K
Standard
WobbleIn areas where clearance may be a problemthe ‘wobble’ square drive can be used atan angle of up to 15°.
LockingA lever at the ratchet end of the extensionpushes down a rod inside the bar which locksout the socket retaining ball, securing thesocket to the bar. Ideal for use where thereis a risk of leaving a socket in a recess.
Extension Bars
ExtensionsManufactured from high quality chrome vanadium with a fully polished finish. All with knurled ‘finger grip’.
Wobble
Locking
3/8
Standard
NEW
NEW
GROUP
582 SOCKETS & ACCESSORIES - 3/8” SQUARE DRIVE
Type Size Overall WeightLength each
6mm 26 30g7mm 26 30g8mm 26 30g9mm 26 30g
Metric10mm 26 30g
Single11mm 26 30g
Hex12mm 26 30g13mm 26 30g14mm 30 40g15mm 30 40g16mm 30 50g17mm 30 60g18mm 30 70g19mm 30 70g
Single-Hexagon Sockets 6 point - Offer a more positivelocation, particularly on worn orrounded nuts, but require a one-sixth turn to engage the nextpoint of the socket.
3/8
Type Size Overall WeightLength each
8mm 62 40g9mm 62 40g10mm 62 50g11mm 62 50g
Metric12mm 62 60g13mm 62 60g14mm 62 70g15mm 62 100g16mm 62 115g17mm 62 130g18mm 64 120g19mm 64 140g21mm 64 155g22mm 64 200g3/8” 63 45g
AF7/16” 63 50g1/2” 63 60g9/16” 63 60g5/8” 65 110g11/16” 65 120g3/4” 65 135g13/16” 65 160g
Socket StylesUsed in automotive andaerospace. The weight tostrength ratio ensures thereliability and accessibility thatis so important in this type ofproduction environment.
Bi-Hexagon StandardLength Sockets
Type Size Overall WeightLength each
6mm 26 30g7mm 26 30g8mm 26 30g9mm 26 30g10mm 26 30g11mm 26 30g
Metric 12mm 26 30g13mm 26 30g14mm 30 40g15mm 30 40g16mm 30 50g17mm 30 60g18mm 30 70g19mm 30 70g20mm 30 80g21mm 30 80g22mm 27 100g1/4” 27 30g5/16” 27 30g11/32” 27 30g3/8” 27 30g
AF 7/16” 27 30g1/2” 27 30g9/16” 27 40g5/8” 27 50g11/16” 30 60g3/4” 25 70g13/16” 27 80g7/8” 27 10g1/8” 27 35g3/16” 27 45g
Whit 1/4” 30 45g5/16” 30 45g3/8” 30 45g7/16” 30 85g1/2” 30 120g
Order CodeKEN-582-5240K-5250K-5260K-5270K-5280K-5290K-5300K-5310K-5320K-5330K-5340K-5350K-5360K-5370K-5380K-5390K-5400K-5430K-5440K-5450K-5460K-5470K-5480K-5490K-5500K-5510K-5520K-5530K-5540K-5580K-5590K-5600K-5610K-5620K-5630K-5640K
Order CodeYMT-582-5240K-5250K-5260K-5270K-5280K-5290K-5300K-5310K-5320K-5330K-5340K-5350K-5360K-5370K-5380K-5390K-5400K-5430K-5440K-5450K-5460K-5470K-5480K-5490K-5500K-5510K-5520K-5530K-5540K
-------
Single-HexagonStandard Length
Deep Sockets
Order CodeKEN-582-5700K-5710K-5720K-5730K-5740K-5750K-5760K-5770K-5780K-5790K-5800K-5810K-5820K-5830K-5870K-5880K-5890K-5900K-5910K-5920K-5930K-5940K
Order CodeYMT-582
--
-5720K-5730K-5740K-5750K-5760K-5770K
--5790K
--5810K
--5830K-5870K-5880K-5890K-5900K-5910K-5920K-5930K-5940K
3/8
3/8
3/8
3/8
3/8
Order CodeKEN-582-5554K-5555K-5556K-5557K-5558K-5559K-5560K-5561K-5562K-5563K-5564K-5565K-5566K-5567K
Bi-Hexagon Sockets 12 point – side drive design givesa higher torque than normalsockets, grip worn nuts and willnot round off existing nuts. Allhave a ball-retaining groove oneach face of the square drive,which ensures a positive fit withaccessories. Require only a one-twelfth turn to engage thenext point of the socket.
Size Order CodeKEN-582
E6 -5960KE8 -5962KE10 -5964KE12 -5966KE14 -5968KE16 -5970K
TX SocketsChrome vanadium. For use with male headed TX fasteners commonly found inthe automotive industry. 29mm overall length and eachweighing 45g.
Page502
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
SOCKETS & ACCESSORIES - 3/8” SQUARE DRIVEGROUP
582
Hex Bit AdaptorChrome vanadium. For converting
square drive tooling to use hexagon bits.
Order CodeKEN-582
-6000K-6010K-6020K-6030K-6040K-6050K-6080K-6090K-6100K-6110K-6120K-6130K-6140K
-6201K-6202K-6203K-6204K
-6211K-6212K-6213K
-6222K-6223K-6224K
-6231K-6232K-6233K-6234K-6235K-6236K-6237K-6238K-6239K-6241K-6242K-6243K-6244K
Order CodeYMT-582
-6000K-6010K-6020K-6030K-6040K-6050K
-------
-6201K-6202K-6203K
-
---
-6222K-
-6224K
----
-6235K-6236K-6237K-6238K
--6241K-6242K
--6244K
Female/Male Converters Chrome vanadium. For using a
combination ofsquare drivesocketry in thesame application.
Screwdriver Bit Sockets Often used in the automotive andaerospace industries. The weightto strength ratio ensures thereliability and accessibility that isimportant in this type ofenvironment. Made from chromevanadium steel, fully chromeplated with a mirror finish andaluminium-free to ensure nonsparking. All have ball retaininggrooves.Conform to DIN standards.
Spark PlugSockets
For insertion and removalof spark plugs. Neopreneinsert helps retain the
spark plug and protect the insulation material from damage.
Size Overall Weight Order Code(Plug) Length each YMT-582M10 65mm 110g -5670KM14 68mm 140g -5660K
Spark Plug SocketsDesigned for insertion and removal ofthe spark plug. The neoprene inserthelps retain and protect the insulationfrom accidental damage.
DoubleLug
Chrome vanadium. For connecting
two female square drives.25mm long.
Hex Bit Adaptor Chrome vanadium. For converting
square drive tooling to use hexagon bits.
Size Bit Lgth Overall Weight(mm) Lgth (mm) each
3mm 20 50 25g4mm 20 50 30g5mm 20 50 30g6mm 20 50 35g8mm 20 50 45g
10mm 20 50 55g1/8” 20 50 25g
5/32” 20 50 30g3/16” 20 50 30g7/32” 20 50 35g1/4” 20 50 40g
5/16” 20 50 45g3/8” 20 50 55g
No 1 20 50 50gNo 2 20 50 50gNo 3 20 50 55gNo 4 20 50 55g
No 1 20 50 50gNo 2 20 50 50gNo 3 20 50 55g
3/16” 20 50 50g7/32” 20 50 50g1/4” 20 50 55g
T6 20 50 50gT7 20 50 50gT8 20 50 50gT9 20 50 50g
T10 20 50 50gT15 20 50 50gT20 20 50 55gT25 20 50 50gT27 20 50 55gT30 20 50 55gT40 20 50 55gT45 20 50 55gT50 20 50 55g
Size Overall Weight Order CodeLength each KEN-582
4mm 100mm 40g -6314K5mm 100mm 40g -6315K6mm 100mm 45g -6316K7mm 100mm 45g -6317K8mm 100mm 55g -6318K
10mm 100mm 65g -6320K
Individual Bits - Hexagon
Description Weight Order Codeeach KEN-582
Hexagon 6 Piece Set 310g -6324KTX 6 Piece Set 410g -6340K
PZ
TX
Crosspoint
Hexagon
Slotted
Long Screwdriver Bit Sockets &Socket Bit Sets
Ideal for accessing deep seated bolts that have been fitted knurled bodies forextra grip. Made from S2 chrome vanadium. Supplied on storage rail.
6 Piece Set Contents: T20, T25, T30, T40 T45 and T50
Hexagon Bit Sets
TX
Size Overall Weight Order CodeLength each KEN-582
T20 95mm 65g -6330KT25 95mm 65g -6331KT30 95mm 65g -6332KT40 95mm 65g -6334KT45 95mm 65g -6335KT50 95mm 65g -6336K
Individual Bits - TX
3/8
3/8
3/8
Drive Weight Order CodeMale x Male each KEN-582
3/8” x 3/8” 10g -5170K
Drive Weight Order CodeFemale x Male each KEN-582
3/8” x 1/4” 20g -5180K3/8” x 1/2” 40g -5190K1/2” x 3/8” 50g -6700K
Size Overall Weight Order Code(Plug) Length each KEN-582M10 65mm 110g -5670KM12 65mm 110g -5680KM14 68mm 140g -5660K
Drive Overall Weight Order Codex Hex Length each KEN-582
3/8”x1/4” 30mm 30g -5200K
Drive Overall Weight Order Codex Hex Length each YMT-582
3/8”x1/4” 30mm 15g -5200K
3/8
3/8
3/8
6 Piece Set Contents:4, 5, 6, 7, 8, 10mm. 6
PIECES
Page503
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
GROUP
582 SOCKETS & ACCESSORIES - 1/2” SQUARE DRIVE
Lever Reversible Rubber HandleChrome vanadium. Rubber grip, 72 tooth ratchet. With thumblever for reversing without having to remove the socket or
accessory. With quick release. A high quality wrench for theprofessional user.
Lever Reversible Steel Handle Fully chromed all steel handle with thumb lever for reversingwithout having to remove the socket or accessory.
Lever Reversible Steel Handle Flexi-JointFully chromed lever type. All steel handle. The hinged joint givesadditional capability in areas of restricted access.
Standard has head locking mechanism.
Ratchet Repair Kits
1/2
Overall Number of Weight Order CodeLength Teeth each KEN-582240mm 72 430 -6422K
Type Overall Weight Order CodeLength each KEN-582
Standard 420 860g -6370KStubby 160 110g -6380K
Overall Number of Weight Order CodeLength Teeth each KEN-582250mm 72 510g -6412K
Overall Number of Weight Order CodeLength Teeth each KEN-582270mm 30 500g -6430K
To suit Ratchet Number Weight Order Codeeach KEN-582
KEN-582-6400K 130g -6740KKEN-582-6412K/-6422K 140g -6725KKEN-582-6380K/-6390K 140g -6745K
Push Through Rubber Handle
Push Through Rubber HandleA very economic wrench with a one way ratchet.Push through square drive allows left and right
hand operation.
1/2
1/2
1/2
1/2” DRIVE: The most popular drive size used in theservice and maintenance industries. This popularity isdue to its strength and robust nature.
1/2
Page504
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Lever Reversible Rubber Handle
With thumb lever for reversing without having to remove the socket or accessory.
Highly polished chrome vanadium with rubber grip.
Overall Number of Weight Order CodeLength Teeth each SEN-582245mm 44 640g -6400K
1/2
Disc Type Steel HandleBasic wrench with high polished finish. Fitted with spring loaded ball bearing socket retainer.
1/2
Overall Number of Weight Order CodeLength Teeth each KEN-582245mm 44 655g -6400K
Push Through Steel Handle - GearlessChrome - molybdenum with mirror polished finish.Push through square drive, needs only 3%
movement to operate gearless ratchet.
1/2
Overall Weight Order CodeLength each KEN-582250mm 470g -6435K
Quick Release Ratchet Handle
With thumb lever for reversing without having toremove the socket or accessory. Highly polished
chrome vanadium with rubber grip.
Overall Number of Weight Order CodeLength Teeth each YMT-582250mm 72 510g -6412K
Overall Number of Weight Order CodeLength Teeth each YMT-582250mm 72 435g -7512K
1/2
Drive Overall Weight Order CodeM x F Length each KEN-582
1/2”x 1/2”75mm 155g -6580K
Universal JointHinged through 180° in both directions. Knurled for extra grip.
1/2
1/2
Composite Ratchet HandleQuality composite reversible ratchet handle with reverse lever,push button quick release and an offset handle to help
eliminate knuckle scrapes. Manufactured from composite materialmaking it very light yet still very hard wearing. 72-tooth gear drive formaximum power and chrome vanadium core for strength.
NEW
Swivel Handle
With hinged link and rubber grip.
Overall Weight Order CodeLength each YMT-582300mm 645g -6570K
1/2
Grip Overall Weight Order CodeLength each KEN-582
Rubber 300mm 645g -6570KAmerican 375mm 540g -6540KAmerican 450mm 830g -6550K
Swivel Handles The hinged link allows operation at varied angles to aid access in restricted areas.
American Grip - Heavy Duty
American Grip
Offset Fixed Handle Knurled grip. Chrome vanadium. Fixed wrench for applications requiring rigid set up.
1/2
SOCKETS & ACCESSORIES - 1/2” SQUARE DRIVEGROUP
582
1/2
Grip Overall Weight Order CodeLength each KEN-582
Heavy DutyAmerican 450mm 1099g -6545KAmerican 600mm 1376g -6555K
Service PartsReplacement Knuckle -6548K
Overall Weight Order CodeLength each KEN-582200mm 255g -6590K
Flexi-ring End SocketsMade from polishedchrome vanadium.
These tough flexi-ring endsockets are designed toallow access over long studsand for awkwardly positionednuts and bolts. Swivelsthrough 220°.
8 Piece Metric Set Contents:13, 14, 15, 16, 17, 19, 22, and 24mm. Supplied with a sturdy hanging rail.
Type SizeOverall Weight Order CodeLength each KEN-582
13mm 70mm 124g -1180K14mm 70mm 123g -1181K
Metric 15mm 70mm 121g -1182K16mm 70mm 119g -1183K17mm 77mm 158g -1184K19mm 77mm 152g -1185K22mm 82mm 193g -1186K24mm 86mm 213g -1187K
Number Contents Weight Order Codeof Pieces each KEN-582
8 As above 1.3kg -1190K
1/2
1/2
Overall Weight Order CodeLength each KEN-582375mm 65g -6670K
Handle Overall Weight Order CodeType Length each KEN-582
Rubber Grip 400mm 470g -6560KSteel Grip 425mm 510g -6600K
Steel Grip
Extension BarsManufactured from high quality chrome vanadium with a fullypolished finish. All with knurled ‘finger grip’.
Standard
1/2
Overall Weight Order CodeLength each KEN-582075mm 140g -6460K125mm 225g -6480K250mm 440g -6500K375mm 630g -6520K450mm 735g -6530K
WobbleIn areas where clearance may be a problem the ‘wobble’ square drivecan be used at an angle of up to 15°.
LockingA lever at the ratchet end of the extension pushes down a rod insidethe bar which locks out the socket retaining ball, securing the socketto the bar. Ideal for use where there is a risk of leaving a socket in arecess.
Extension Bars
Chrome finish.
Standard
Overall Weight Order CodeLength each YMT-58275mm 125g -6460K125mm 195g -6480K250mm 385g -6500K
1/2
Overall Weight Order CodeLength each KEN-582250mm 360g -6440K
Sliding ‘T’ HandleManufactured from high quality chrome vanadium with a fully polished finish. The sliding bar will give
many options for leverage within a given space.
Overall Weight Order CodeLength each KEN-582075mm 65g -6630K125mm 120g -6640K250mm 260g -6660K
Speed Braces
Rubber grip, for fast nut spinning. Manufactured from high quality
chrome vanadium, fully polished finish. Ideal for nut spinning.
1/2
1/2
Page505
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
8PIECES
NEW
GROUP
582 SOCKETS & ACCESSORIES - 1/2” SQUARE DRIVE
Type Size Overall WeightLength each
10mm 77 100g11mm 77 110g12mm 77 110g13mm 77 110g14mm 77 110g15mm 77 130g
Metric 16mm 77 120g17mm 77 120g18mm 77 150g19mm 77 150g21mm 77 160g22mm 77 200g24mm 77 220g26mm 77 210g27mm 77 250g30mm 77 320g32mm 77 340g1/2” 77 110g9/16” 77 100g5/8” 77 120g
AF 11/16” 77 110g3/4” 77 140g13/16” 77 160g7/8” 77 190g15/16” 77 220g1” 77 200g11/8” 77 270g11/4” 77 390g
Bi-Hexagon StandardLength Sockets
Type Size Overall WeightLength each
8mm 36 50g9mm 37 50g
10mm 37 50g11mm 37 50g12mm 37 50g13mm 37 50g14mm 37 50g15mm 37 60g16mm 37 60g17mm 37 60g18mm 37 80g19mm 37 70g
Metric 20mm 37 80g21mm 37 70g22mm 37 90g23mm 37 110g24mm 37 110g25mm 40 150g26mm 40 140g27mm 40 170g28mm 40 170g29mm 40 170g30mm 45 210g32mm 45 230g33mm 45 230g36mm 45 245g5/16” 37 50g3/8” 37 50g7/16” 37 50g1/2” 37 50g9/16” 37 50g19/32” 37 60g5/8” 37 60g
AF 11/16” 37 60g3/4” 37 70g13/16” 37 80g7/8” 40 90g15/16” 40 110g1” 40 130g11/16” 40 160g11/8” 40 170g13/16” 45 200g11/4” 45 230g1/8” 37 50g3/16” 37 50g1/4” 37 50g5/16” 37 60g
Whit 3/8” 37 50g7/16” 37 70g1/2” 40 90g9/16” 40 140g5/8” 40 170g11/16” 45 220g3/4” 45 220g
1/2
Order CodeYMT-582-6900K-6910K-6920K-6930K-6940K-6950K-6960K-6970K-6980K-6990K-7000K-7010K-7020K-7030K-7040K-7050K-7060K-7070K-7080K-7090K-7100K-7110K-7120K-7130K-7140K-7150K-7160K-7170K-7180K-7190K-7200K
--7220K-7230K-7240K-7250K-7260K-7270K-7280K-7290K-7300K
--7320K
--7390K-7400K-7410K-7420K-7430K-7440K-7450K-7460K
--
1/2
Order CodeKEN-582-6900K-6910K-6920K-6930K-6940K-6950K-6960K-6970K-6980K-6990K-7000K-7010K-7020K-7030K-7040K-7050K-7060K-7070K-7080K-7090K-7100K-7110K-7120K-7130K-7140K-7150K-7160K-7170K-7180K-7190K-7200K-7210K-7220K-7230K-7240K-7250K-7260K-7270K-7280K-7290K-7300K-7310K-7320K-7380K-7390K-7400K-7410K-7420K-7430K-7440K-7450K-7460K-7470K-7480K
Order CodeKEN-582-7346K-7347K-7348K-7349K-7350K-7351K-7352K-7353K-7354K-7355K-7356K-7357K-7358K-7359K-7360K-7361K-7362K-7364K-7365K-7366K-7368K-7370K-7374K
1/2
1/2
Single-Hexagon StandardLength Sockets
Six point - offer a more positive location,particularly on worn or rounded nuts, butrequire a one-sixth turn to engage thenext point of the socket.
Type Size Overall WeightLength each
8mm 36 50g9mm 37 50g
10mm 37 50g11mm 37 50g12mm 37 50g13mm 37 50g14mm 37 50g15mm 37 60g16mm 37 60g17mm 37 60g
Metric 18mm 37 80g19mm 37 70g20mm 37 80g21mm 37 70g22mm 37 90g23mm 37 110g24mm 37 110g26mm 40 140g27mm 40 170g28mm 40 170g30mm 45 210g32mm 45 230g36mm 45 245g
Bi-Hexagon Deep Sockets
Order CodeKEN-582-7530K-7540K-7550K-7560K-7570K-7580K-7590K-7600K-7610K-7620K-7630K-7640K-7650K-7660K-7670K-7680K-7690K-7700K-7710K-7720K-7730K-7740K-7750K-7760K-7770K-7780K-7790K-7800K
1/2
1/2
Single-Hexagon Sockets Six point - offer a more positivelocation, particularly on worn orrounded nuts, but require a one-sixth turn to engage the nextpoint of the socket.
Socket StylesUsed in automotive andaerospace. The weight tostrength ratio ensures thereliability and accessibility thatis so important in this type ofproduction environment.
Bi-Hexagon Sockets 12 point - side drive design givesa higher torque than normalsockets, grip worn nuts and willnot round off existing nuts. Allhave a ball-retaining groove oneach face of the square drive,which ensures a positive fit withaccessories. Require only a one-twelfth turn to engage the nextpoint of the socket.
Page506
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
SOCKETS & ACCESSORIES - 1/2” SQUARE DRIVEGROUP
582
PZ
TX
Crosspoint
Order CodeKEN-582
-7832K-7834K
--7836K-7838K-7839K
-7840K-7841K-7842K-7843K-7807K-7844K-7845K-7846K-7847K-7848K-7849K-7851K-7853K-7854K-7855K-7856K-7857K-7859K
-7861K-7862K-7863K
-7865K-7866K-7867K
-7870K-7871K-7872K-7873K-7874K-7875K-7876K-7877K-7878K-7879K
Hexagon
Slotted
Female/Male ConvertersChrome vanadium. Forusing a combination
of square drive socketry in the same application.
Screwdriver Bits For insertion and removal offasteners and fixings using 1/2” square drive tooling. Madefrom chrome vanadium steel,fully chrome plated with amirror finish and aluminium-free to ensure non sparking. All have ball retaining grooveon each face of the squaredrive. Conform to DIN standards.
Spark Plug SocketsDesigned for insertion/ removal ofspark plugs. The Neoprene insert helpsretain the spark plug and protect the
insulation material from accidental damage. A unique double knurl gives a high gripessential for a quick tool change when hands are greasy.
E-TX SSockets
Chrome vanadium. For use with male
headed TX fastenerscommonly found in theautomotive industry.
Size Overall Weight Order Code(Plug) Length each KEN-582E10 37mm 50g -7485KE12 37mm 55g -7487KE14 37mm 55g -7489KE16 37mm 55g -7491KE18 37mm 70g -7493KE20 37mm 90g -7495K
Double Ended Lug Chrome vanadium.For connecting two
female square drives.
Drive Overall Weight Order Codex Hex Length each KEN-582
1/2”x1/4” 35mm 40g -6710K1/2”x5/16”75mm 45g -6720K
Hex Bit Adaptors Chrome vanadium. For converting
square drive tooling to use hexagon bits.
Size Bit Lgth Overall Weight(mm) Lgth (mm) each
8mm 20 55 80g9mm 20 55 80g
10mm 20 55 90g12mm 20 55 100g14mm 20 55 130g16mm 20 55 140g
4mm 20 55 80g5mm 20 55 70g6mm 20 55 70g7mm 20 55 70g7mm 20 100 110g8mm 20 55 70g
10mm 20 55 80g12mm 20 55 100g14mm 20 65 160g17mm 20 70 205g19mm 20 70 245g
3/16” 20 55 58g1/4” 20 55 59g
5/16” 20 55 65g3/8” 20 55 76g1/2” 20 55 107g
9/16” 20 55 144g3/4” 20 70 144g
No.2 20 55 55gNo.3 20 55 65gNo.4 20 55 70g
No.2 17 55 70gNo.3 17 55 75gNo.4 17 55 80g
T20 20 58 60T25 17 55 70T27 17 55 70T30 17 55 70T40 17 55 70T45 17 55 70T50 17 55 70T55 17 55 80T60 17 55 105T70 17 55 115
Order CodeYMT-582
--7809K-7810K
---
-7840K-7841K-7842K
--
-7844K-7845K-7846K-7847K-7848K-7849K
-------
---
---
----------
Size Overall Weight Order CodeLength each KEN-582
M6 55mm 58g -7322KM8 55mm 65g -7324KM8 100mm 84g -7326K
M10 100mm 103g -7328KM12 100mm 136g -7330KM14 100mm 181g -7332K
Spline Screwdriver Bit Set
7 Piece set containing shortbits for bolts in tight areas andlong bits for accessing deepseated, tight fitted spline bolts.Handy storage rail.supplied.
Individual Bits
Description Weight Order Codeeach KEN-582
6 Piece Set 665g -7340K(M6-M14)
Size Overall Weight Order Code(Plug) Length each KEN-582M10 65mm 85g -7520KM14 67mm 150g -7500K
Drive Weight Order CodeMale x Male each KEN-582
1/2” x 1/2” 35g -6750K
Drive Weight Order CodeFemale x Male each KEN-582
3/8” x 1/2” 40g -5190K1/2” x 3/4” 40g -6680K1/2” x3/8” 50g -6700K3/4” x 1/2” 55g -8120K
1/2
1/2
1/2
1/2
1/2
Spark PlugSockets
A neoprene insert helpsretain the spark plug andprotect the insulation
material from accidental damage.A ball-retaining groove on eachface ensures a positive fit with all accessories. Chamfered leading edge gives easy location.
Size Overall Weight Order Code(Plug) Length each YMT-582M10 65mm 85g -7520KM14 67mm 150g -7500K
1/2
Page507
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
3PIECES
Hexagon Bit and Adaptor Set1/2” square drive bit adaptor set contains a 10mm hex, 1/2” drive hand socket. Supplied in robust storage case.
Set Contents: Hexagon4, 5, 6, 8, 10 and 12mm.
GROUP
582 SOCKETS & ACCESSORIES - 1/2” SQUARE DRIVE
Page508
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Stud ExtractorManufactured from chrome alloy steel with a bright nickel and chrome finish. The locking wheel has a black oxidisedfinish. To use, place the extractor over the stud, then fit any 1/2” square drive handle and turn. The locking wheel moves into place to grip the stud and then remove it. 58mm outside diameter x 65mm high.
Mechanic’s 20 Piece Set Contents: Slotted: 8, 9, 12, 14, and 16mm.TX:T20, T25, T27, T30, T40, T45, T50, T55 and T60.Crosspoint: No.2, 3 and 4.PZNo.2, 3 and 4.
Engineer’s 20 Piece Set Contents: Crosspoint No.2, 3 and 4.Hexagon4, 5, 6, 7, 8, 10, 12, 14, 17 and 19mm, 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 9/16” and 3/4”.
Screwdriver BitSocket Sets
Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and ccessibilitythat is so important in this type of production environment. For insertion and removal of fasteners and fixings using 1/2”square
drive tooling. Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily.Registered Design No. 2053516UK. Manufactured from chrome vanadium steel and are fully chrome plated with a mirror finish andaluminium-free to ensure non-sparking. All have ball retaining groove on each face of the square drive. Conform to DIN standards.Overall length: 55mm. Bit length: 20mm.
Number Contents Weight Order Codeof Pieces each KEN-582
7 As above 2.55kg -7900K
Number Contents Weight Order Codeof Pieces each KEN-582
4 As above 835g -9480K
Stud Puller SetChrome vanadium clamping rollers grip worn or rounded fixingsby compressing onto the fixing as the socket is turned,
applying pressure to grip, turn and remove. Unscrews left and right hand threads.Set Contents: 6mm (1/4”), 8mm (5/16”), 10mm (3/8”), 12mm (7/16”).
Range Weight Order Code(mm) each KEN-5826 - 19 585g -6760K
Number Contents Weight Order Codeof Pieces each KEN-582
20 As above 2.50kg -7890K
1/21/2
1/2
7PIECES
4PIECES
20PIECES
20PIECES
Number Contents Weight Order Codeof Pieces each KEN-582
20 As above 1.90kg -7880K
SOCKETS & ACCESSORIES - 3/4” SQUARE DRIVEGROUP
582
Page509
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Offset Fixed HandleKnurled grip. Chrome vanadium. Fixed wrench for applications requiring rigid set up.
Description Overall Weight Order CodeLength each KEN-582100mm 432g -8070K
Standard 200mm 800g -8060K400mm 1900g -8080K
Extension BarsManufactured from high quality chrome vanadium with a fullypolished finish. All with knurled ‘finger grip’.
Sliding ‘T’ HandleManufactured from high quality chrome vanadium with a fullypolished finish. Sliding bar gives many options for leverage
within a given space.
Overall Weight Order CodeLength each KEN-582485mm 1.35kg -8040K
Overall Weight Order CodeLength each KEN-582
300mm 255g -8090K
3/4” DRIVE: A heavy duty range designed to cope withthe demands of industrial, agricultural machinery andheavy plant, static or mobile.
3/4
3/4
3/4
3/4
Lever Reversible Steel HandleSpring loaded ball bearing socket retainer. A high quality wrench for the professional user.
Bi-Hexagon Sockets A heavy duty range designed to copewith the demands of industrialagricultural machinery and heavy plant,
static or mobile. All Kennedy Professionalsockets have a unique double knurl to give ahigh grip essential for a quick tool changewhen hands are greasy.Manufactured from chromevanadium and fully chromeplated with a mirror finish and aluminium-free toensure non-sparking.Chamfered leading edgeensures easy fastenerlocation. Registered DesignNo. 2053516UK.
Ratchet Repair KitTo suit ratchet number KEN-582- 8000K.
Swivel Handle
The hinged link allows operation at varied angles to aid access in restricted areas.
Overall Number of Weight Order CodeLength Teeth each KEN-582500mm 24 2.40kg -8000K
Overall Number Weight Order CodeLength of Teeth each KEN-582500mm 50 3.00kg -8045K
Overall Number Weight Order CodeLength of Teeth each KEN-582480mm 36 1.50kg -8050K
Disc Type Steel Handle50 tooth reversible ratchet
Non-Reversible Rubber Grip Quick Release36 tooth ratchet.
Grip Overall Weight Order CodeLength each KEN-582
Knurled 475mm 1.90kg -8100K
3/4
3/4
3/4
3/4
Double Ended Lug Chrome vanadium. For usein push through ratchets
and similar.
Male x male: 3/4” x 3/4”.
Drive ConvertersFor using a combination ofsquare sockets in one
application.
Universal JointKnurled for extra grip.
Male x female: 3/4” x 3/4”.
3/43/43/4
Overall Order CodeLength KEN-582110mm -8020K
Weight Order Codeeach KEN-582550g -8010K
Overall Order CodeLength KEN-582 £li.nk60mm -8130K
Drive Order CodeF x M KEN-582
3/4” x 1” -8140K1” x 3/4” -9140K
Size Overall Weight Order CodeLength each KEN-582
Metric22 50mm 210g -8150K24 50mm 210g -8170K26 50mm 210g -8190K27 50mm 210g -8200K29 50mm 240g -8220K30 53mm 280g -8230K32 55mm 280g -8240K33 55mm 310g -8250K36 55mm 400g -8260K38 60mm 450g -8280K41 60mm 540g -8300K46 60mm 650g -8320K50 70mm 800g -8340K55 70mm 880g -8360K60 70mm 950g -8380K
Size Overall Weight Order CodeLength each KEN-582
AF7/8” 50mm 140g -8400K
15/16” 50mm 160g -8410K1” 50mm 180g -8420K
11/16” 50mm 200g -8430K11/8” 50mm 240g -8440K13/16” 54mm 250g -8450K11/4” 54mm 260g -8460K15/16” 54mm 260g -8470K13/8” 57mm 280g -8480K17/16” 57mm 280g -8490K11/2” 60mm 290g -8500K15/8” 62mm 320g -8520K111/16” 65mm 320g -8530K13/4” 65mm 330g -8540K113/16” 65mm 350g -8550K17/8” 69mm 360g -8560K2” 71mm 380g -8580K
3/4
GROUP
582 SOCKETS & ACCESSORIES - 1” SQUARE DRIVE
Page510
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Lever Type Steel HandleBasic wrench with satin finish. Fitted with spring loaded ball bearing socket retainer.
Sliding ‘T’ HandleManufactured from high quality chrome vanadium with a fully polished finish. The sliding bar will give many options for leveragewithin a given space.
ExtensionsManufactured from high quality chrome vanadium with a fully polished finish. Knurled ‘finger grip’.
Bi-Hexagon Standard Sockets Bi-hexagon. (12 point). This range of 1” (25mm) seriessockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and
reliability under heavy loads. Used extensivelyin heavy plant, rail, shipyard and oil rigindustries. The 12 point bi-hexagonside drive design gives a higher torquethan normal sockets. Made fromchrome vanadium and fully chromeplated with a mirror finish. Aluminium-free to ensure non-sparking.Chamfered leading edge ensures easyfastener location.
1
1” Drive The ultimate for high torque hand applications. Designed to give strength and reliabilityunder heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig industries.1
Spares
Lever Type Steel Handlewith Extension Sliding ‘T’ Handle with Extension
1
1
1
Type Size Overall Weight Order CodeLength each KEN-582
36mm 65 280g -9200K41mm 65 330g -9210K46mm 70 360g -9220K
Metric 50mm 75 360g -9230K55mm 80 400g -9240K60mm 85 420g -9250K65mm 90 450g -9260K70mm 100 480g -9270K75mm 100 520g -9280K80mm 110 550g -9290K
AF11/2” 70 300g -9360K21/4” 85 400g -9420K
Description Overall Weight Order CodeLength each KEN-582
Standard 200mm 1.00kg -9040K400mm 1.80kg -9060K
Overall Number of Weight Order CodeLength Teeth each KEN-582740mm 40 5.40kg -8980K
Overall Weight Order CodeLength each KEN-582640mm 3.10kg -9020K
1
1
Description Order CodeKEN-582
Ratchet Repair Kit -8990K
SOCKETS & ACCESSORIESGROUP
582
Page511
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Socket Rails & Clips
Made from steel, bright chrome plated and can be fixed or loose in a toolbox, or fitted to a bench or wall. Can be used with any size square drive socket.
Socket Rail Trays
Steel trays that comprise of 430mm rails with clips for retaining 1/4”, 3/8” and 1/2” sq. drive sockets. Trays are fitted with carry handles and hanging holes for workshop storage.
Socket ClipsSocket Rails Sq.Drive Weight Order Code
Size per 100 KEN-5821/4” 60g -9880K3/8” 90g -9890K1/2” 150g -9900K
Socket RacksSocket rails and socket clips combined together.
SRT080Contents:Powder coated traywith carrying handle.30x 1/2” sq. drive socket clips,30x 3/8” sq. drive socket clips,20x 1/4” sq. drive socket clips.
SRT110Contents:Powder coated tray with integral hanging slots.30x 1/2” sq. drive socket clips,30x 3/8” sq. drive socket clips,30x 1/4” sq. drive socket clips,20x 1/4” hexagon screwdriver bit holders.
1/4” Hexagonscrewdriver bitholders
SRT080
SRT110
Product Number Weight Order CodeNumber of Pieces each KEN-582SRT080 80 880g -9850KSRT110 110 1.80kg -9860K
Sq.Drive Overall Number Weight Order CodeSize Length of Clips each KEN-582
1/4”420mm 15 70g -9920K220mm 8 30g -9930K
3/8”420mm 15 70g -9950K220mm 8 30g -9960K
1/2”420mm 15 70g -9980K220mm 8 30g -9990K
Overall Weight Order CodeLength per 10 KEN-582220mm 290g -9820K420mm 430g -9840K
110PIECES
80PIECES
GROUP
582 SOCKETS & ACCESSORIES - MIXED DRIVE
Page512
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
HOME IMPROVER
1/4” Drive Ideal for assembly and servicing of small precision mechanisms associated with electrical,electronic, ignition and refrigeration work.3/8” Drive Used in the automotive and aerospace industries. The weight to strength ratio ensures the
reliability and accessibility that is so important on this type of production. Sockets have a knurl feature to give a high grip which isessential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and arefully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.Sockets manufactured to: ANSI B107.5M: 1987, ANSI B107.1: 1978 & BS 4006 : 1992.Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992.
Number Weight Order Codeof Pieces each SEN-582
100 5.00kg -0080K
Number Weight Order Codeof Pieces each SEN-582
40 3.90kg -0100K
SA40MA 40 Piece - Metric & Inch3/8” Drive Bi-Hex Sockets:
6, 7, 8, 9, 10, 11, 12, 13,14, 15, 16, 17, 19 and21mm. 1/4”, 5/16”, 3/8”, 1/2”,9/16”, 5/8”, 7/16”, 11/16” and 3/4” AF. Deep Sockets: 10, 11, 12, 13 & 14mm. 9/16”, 5/8”, 11/16” and 3/4” AF. Spark Plug Sockets:M10 (16mm) and M14 (21mm).Accessories: Ratchet handle, sliding T-handle, swivel handle,universal joint. 75mm and150mm extension bars.
SDA100MAB - 100 Piece Metric, Inch & BA
1/4” Drive Bi-Hex Sockets:
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm. 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2” AF. 0, 2, 4, 6, 8 and 10BA. Screwdriver Bits: Slotted 3.5, 4.5, 5.5, 6mm. Crosspoint No.1, No.2, No.3. PZ No.1, No.2, No.3. TX T15, T20, T25. Hex 3, 4, 5, 6, 8, 10mm, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8” AF.Accessories: 50, 75 and 150mm extension bars, ratchet handle, sliding T-handle, spinner handle, universal joint.
3/8” Drive Bi-Hex Sockets:
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19 and 21mm. 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” and 3/4” AF. Deep Sockets: 10, 11, 12, 13 and 14mm 9/16”, 5/8”, 11/
16” and 3/4” AF.Spark Plug Sockets: M10 (16mm) and M14 (21mm). Accessories: 75 and 150mm extension bars, flexible handle, ratchet handle, universal joint, sliding T-handle
1/4
3/8
3/8
100PIECES
40PIECES
SOCKET SETS - 1/4” SQUARE DRIVEGROUP
582
Page513
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
SD60MAB - 60 Piece Metric, Inch & BA Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 and 13mm. 3/16”, 7/32, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16” and 1/2” AF. 0, 2, 4, 6, 8 and 10BA.
Screwdriver Bits: Slotted 3.5, 4.5, 5.5, 6mm. Crosspoint No.1, No.2 No.3. PZ No.1, No.2, No.3. TX T15, T20 and T25. Hex 3, 4, 5, 6, 8 and 10mm. 1/8”, 5/32”, 3/16”,7/32”, 1/4”, 5/16”, 3/8” AF.Accessories: ratchet handle, sliding T-handle, spinner handle,universal joint. 50, 75 and 150mm extension bars,
1/4” Drive Ideal for assembly and servicing of small precision mechanisms associated with electrical,electronic, ignition and refrigeration work. Sockets have a knurl feature to give a high grip which is essentialfor a quick tool change when your hands are greasy/oily. The six point bi-hexagon side drive
design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured fromchrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non-sparking. Chamfered leading edge ensures easy fastener location. Sockets made to: ANSI B107.5M : 1987, ANSI B107.1 : 1978 & BS 4006 : 1992.Accessories made to: ANSI B107.10M : 1982 & BS 4006 : 1992.
RSD43 - 43 Piece Metric & Inch
High quality chrome vanadium for garage, workshop and homemaintenance.
Sockets: 6, 7, 8, 9, 10, 11, 12mm. 3/16”, 1/4”, 5/16”, 11/32”, 3/8”, 7/16” and 1/2” AF.
Long Series (50mm) Bits: Slotted 4, 5, 6mm. Crosspoint No.1,No.2, No.3. TX T10, T15, T20, T25, T27, T30, T40, T45.Short Series (25mm) Bits: PZ No.1, No.2. Hex 1.5, 2, 2.5, 3, 4, 5, 5.5 and 6mm.Accessories: ratchet spinner handle, 150mm flexible extension bar,100mm hex bit extension bar, 1/4” coupler, 50mm socket coupler.
1/4
1/4
TS29MA - 29 Piece Metric & Inch Socket SetMetric Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13,14mm. AF Sockets: 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”,3/8”, 7/16”,1/2”, 9/16”.
Accessories: ratchet handle, spinner handle, sliding T-handle, flexi-drive 145mm, universal joint, extension bar 100mm.
TS19M - 19 Piece Metric Socket Set Metric Hex Sockets:4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.
Accessories: ratchet handle, spinner handle, sliding T-handle, flexi-drive 145mm, universal joint, extension bar 100mm.
51 Piece Metric/AFTSD51MA
Standard & Deep Sockets Standard Sockets (Metric): 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12,13, 14mm.
Deep Sockets (Metric): 6, 7, 8, 9, 10, 11, 12, 13, 14mm. Standard Sockets (AF): 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”.Deep Sockets (AF): 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”.Accessories: ratchet handle (rubber grip), 100mm sliding T-handle, 100 and 250mm extension bars, 50 and 150mm wobble extensions, universal joint, spinner handle, 150mm flexible extension, swivel handle rubber grip.
1/4
1/41/4
Number Weight Order Codeof Pieces each SEN-582
42 1.10kg -0040K
Number Weight Order Codeof Pieces each KEN-582
51 3.2kg -4902K
Number Weight Order Codeof Pieces each SEN-582
60 1.50kg -0060K
Number Weight Order Codeof Pieces each KEN-582
29 1.2kg -4895K
Number Weight Order Codeof Pieces each KEN-582
19 880g -4893K
HOME IMPROVER
19PIECES
29PIECES
60PIECES
42PIECES
51PIECES
GROUP
582 SOCKET SETS - 1/4” SQUARE DRIVE
Page514
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
TS46MA - 46 Piece Metric & InchStandard Sockets with Screwdriver Bits
Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.AF Sockets: 3/16”, 7/32”, 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”. Screwdriver Bits: Slotted 4, 5.5mm. Crosspoint No.2, No.3. Hex 3, 4, 5, 6, 8mm. Hex 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16” AF.Accessories: sliding T-handle, ratchet handle, wobble extension 50and 150mm, extension bars 100 and 250mm, universal joint, jointedswivel handle 150mm, flexible extension 150mm, spinner handle.
1/4” Drive Ideal for assembly and servicing of small precision mechanisms associated with electrical,electronic, ignition and refrigeration work. Sockets have a knurl feature to give a high grip which is essentialfor a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive design will give
a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M: 1987, ANSI B107.1: 1978 & BS 4006 : 1992.Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992.
1/4
TSD46M - 46 Piece Metric SetStandard & Deep Sockets with Screwdriver Bits
Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.Deep Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm. Screwdriver Bits: Slotted 4, 5.5, 7mm. Crosspoint No.1, No.2, No.3. Hex 3, 4, 5, 6, 8mm.Accessories: sliding T-handle, ratchet handle, extension bar 50 and150mm, wobble extension 100 and 250mm, universal joint, jointedswivel handle 150mm, spinner handle.
TSD82MA - 82 Piece Metric & InchStandard & Deep Sockets with Screwdriver Bits Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm. 3/16”, 7/32”, 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2” AF.
0, 1, 2, 3, 4, 5, 6BA. Deep Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.Screwdriver Bits: Slotted 4, 5.5, 7mm. Crosspoint No.1, No.2,No.3, No.4. Hex 3, 4, 5, 6, 8mm. 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16” AF. TZ T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40.Accessories: sliding T-handle, ratchet handle, 100, 150 and 250mmextension bars, 50 and 150mm wobble extension, 150mm flexibleextension, square male adaptor 3/8”, 150mm jointed swivel handle,spinner handle, universal joint.
MT50M - 50 Piece MetricStandard Sockets:4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm.
Accessories: ratchet handle, sliding T-handle, 50, 150 and 250mmextension bars, 100mm wobble extension, 150mm flexible extension, universal joint, 150mm jointed swivelhandle, spinner handle.
Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,21, 22, 23, 24, 27, 30, 32, 36mm.
Accessories: quick release ratchet handle, universal joint, sliding T-handle, 375mm swivel handle, 75 and 250mm extensionbars, 150mm wobble extensions.
1/2
1/4
Number Weight Order Codeof Pieces each KEN-582
46 3.20kg -4897K
Number Weight Order Codeof Pieces each KEN-582
50 8.10kg -4899K
Number Weight Order Codeof Pieces each KEN-582
82 3.80kg -4896K
Number Weight Order Codeof Pieces each KEN-582
46 3.00kg -4898K
1/4
1/4
46PIECES
46PIECES
82PIECES
50PIECES
SOCKET SETS - 3/8” SQUARE DRIVEGROUP
582
Page515
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
3/8” Drive Used in the automotive and aerospace industries. The weight to strength ratio ensures thereliability and accessibility that is so important on this type of production. All Kennedy professional socketshave a double knurl feature to give a high grip which is essential for a quick tool change when your hands are
greasy/oily. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will notround off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non-sparking. Chamfered leading edge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M: 1987, ANSI B107.1: 1978 & BS 4006 : 1992. Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992.
S30M - 30 Piece Metric with Screwdriver BitsSockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,21 and 22mm. Spark Plug Sockets: M10 and M14.
Screwdriver Bits: Slotted 5mm, 6mm. Crosspoint No.1, 2, 3, 4. Accessories: Ratchet handle,sliding T-handle, swivel handle,universal joint, 75mm extension bar, 150mm wobble extension,parts tray with magnetic insert. Robust fitted case with securitypadlock hole and cushion grip handle.
3/8 3/8
S40MA - 40 Piece Metric & InchMetric & Inch Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 20, 21, 22mm. 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”,9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8” AF.
Spark Plug Sockets: M10 and M14.Accessories: Ratchet handle, sliding T-handle, universal joint, 75 and 150mm extension bars, 150mm wobble extension, 1/4” and 1/2” male adaptors, 1/4” hexagon coupler. Robust fitted casewith security padlock hole and cushion grip handle.
SD25MA - 25 Piece Metric & InchBi-Hex Sockets Deep Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22mm. 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16” AF.
Accessories: Swivel handle, sliding T-bar, 125mm extension. Parts tray with magnetic insert. Robust fitted case with securitypadlock hole and cushion grip handle.
Number Weight Order Codeof Pieces each KEN-582
25 5.50kg -6190K
Number Weight Order Codeof Pieces each KEN-582
50 4.75kg -6180K
Description Order CodeKEN-593
Replacement-2855KCase
Description Order CodeKEN-567
Locking-6000KClasps (Pair)
Description Order CodeKEN-593
Replacement-2870KCase
Description Order CodeKEN-567
Locking-6000KClasps (Pair)
Accessories
Description Order CodeKEN-593
Replacement-2860KCase
Description Order CodeKEN-567
Locking-6000KClasps (Pair)
Accessories
Number Weight Order Codeof Pieces each KEN-582
40 3.60kg -6175K
Description Order CodeKEN-593
Replacement-2865KCase
Description Order CodeKEN-567
Locking-6000KClasps (Pair)
Accessories
Accessories
3/8 3/8
SSD50M - 50 Piece Metric with Screwdriver BitsStandard & Deep SocketsStandard: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,20, 21, 22mm.
Deep: 10, 11, 12, 13, 14, 15, 17, 19, 22mm. Screwdriver Bits: Slotted 5, 5.5 and 6.5mm. Crosspoint No.1, 2, 3, 4. Hex 3, 4, 5, 6, 8, 10mm. Accessories: Ratchet handle, sliding T-handle, spinner handle, swivel handle, universal joint, 125 and 250mm extensions, 250mm wobble extensions, 1/4” and 1/2” male adaptors, 1/4” hex bit coupler. Robust fitted case with security padlock hole and cushion grip handle.
Number Weight Order Codeof Pieces each KEN-582
30 3.50kg -6170K
40PIECES
30PIECES
50PIECES
25PIECES
SS90MAW - 90 Piece Metric, Inch & Whitworth with Screwdriver Bits
Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14,15, 16, 17, 18, 19, 20, 21, 22mm. 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”,
11/16”, 3/4”, 13/16” and 7/8” AF. 1/8”, 3/16”, 1/4”,5/16”, 3/8”, 7/16”, 1/2” Whit. Screwdriver Bits: Slotted 3/16”, 7/32” and 1/4”. Crosspoint No.1, 2,3, 4. PZ No.1, No.2, No.3. TX T6, T7, T8, T9,T10, T15, T20, T25, T27, T30, T40, T45, T50.Hex 3, 4, 5, 6, 8, 10mm. 1/8”, 5/32”, 3/16”, 7/32”,1/4”, 5/16”, 3/8” AF. Spark Plug Sockets: M10 and M14. Accessories: ratchet handle, sliding T-handle,spinner handle, swivel handle, universal joint.75, 125, 150, 250, 300 and 450mmextensions, 150 and 250mm wobbleextensions, 1/4” and 1/2” male adaptors, 1/4” hexagon coupler. Robust fitted case withsecurity padlock hole and cushion grip handle.
GROUP
582 SOCKETS SETS - 3/8” SQUARE DRIVE
Page516
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
55 Piece Metric & Inch3/8” Drive Bi-Hex Sockets Standard & Deep Sockets
Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 20, 21, 22mm. 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”,11/16”, 3/4”, 13/16”, 7/8” AF. Deep Sockets: 10, 11, 12, 13, 14, 15, 17,19, 22mm. 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”,3/4”, 13/16” AF.Spark Plug Sockets: M10 and M14. Accessories: lever type ratchet, sliding T-handle, universal joint, 150 and 300mmextension bars, 250mm wobble extension,1/4” hex bit coupler. Fitted case withcushioned handle, snap shut clasp andpadlock hole.
3/8
3/8
3/8
3/8” Square Drive Manufactured from industrial quality chrome vanadium steel with high polishedcorrosion resistant finish. The high strength to weight ratio ensures the reliability and accessibility that isnecessary for use in the automotive, assembly, service and maintenance industries.
The bi-hexagonal design allows a higher torque to be applied and will not round off existing nuts. Sockets manufactured to: ANSI B107.5M:1987. Accessories manufactured to: ANSI B107.10M:1982.
55 Piece Metric Standard & Deep Socket Set with Screwdriver Bits3/8” Drive Bi-Hex Sockets Standard & Deep Sockets:
Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 20, 21, 22mm.Deep Sockets: 10, 11, 12, 13, 14, 15, 17,19, 22mm.Spark Plug Sockets: M10 and M14.Screwdriver Bits: Phillips No.1, 2, 3. Slotted 5, 6mm.TX T10, T15, T20, T30, T40, T50. Hex 3, 4, 5, 6, 8, 10mm. Hex bit coupler.Accessories: Lever type ratchet, sliding T-handle, swivel handle, spinner handle,universal joint, 150 and 300mm extensionbars, 250mm wobble extension. Fitted casewith cushioned handle, snap shut clasp andpadlock hole.
Number Weight Order Codeof Pieces each KEN-582
90 8.70kg -6185K
Accessories Order CodeKEN-593
Replacement Case -2890K
Accessories Order CodeKEN-567
Locking Clasps (pr) -6000K
Number Weight Order Codeof Pieces each YMT-582
55 6.00kg -6180K
Accessories Order CodeYMT-593
Replacement Case -2870K
Number Weight Order Codeof Pieces each YMT-582
55 5.70kg -6200K
Accessories Order CodeYMT-593
Replacement Case -2880K
55PIECES
55PIECES
90PIECES
SOCKETS SETS - 1/2” SQUARE DRIVEGROUP
582
Page517
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
50 Piece MetricSockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33, 36mm.
Screwdriver Bits: Hex 4, 5, 6, 7, 8, 10, 12, 14, 17, 19mm. Phillips No.2, No.3, No.4. Chrome Molybdenum Screwdriver Bits: 9 and 14mm chemically blacked. Spark Plug Sockets: M14 and M10.Accessories: black rubber ratchet handle, T-handle, swivel handle,universal joint, 75, 125 and 250mm extension bars. Robust fittedcase with magnetic parts tray, padlock hole and cushion grip handle.
1/2
30 Piece MetricSockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,21, 22, 23, 24, 25, 26, 27, 30, 32mm. Spark Plug Sockets: M14 and M10.
Accessories: quick release flick lever ratchet with rubber grip, T-handle uni-joint, 75, 125 and 250mm extension bars, robust fittedcase with padlock hole and cushion grip handle.
1/2” Square Drive Manufactured from industrial quality chrome vanadium steel with corrosion resistanthigh polish mirror finish, aluminium-free to ensure non-sparking. The 12 point bi-hexagonal side drivesockets allow higher torques to be applied to nuts without damage and grip worn nuts. The strength and
robust design of 1/2” drive make them suitable for the heavy use encountered in agriculture, service and maintenance industries. Sockets manufactured to: ANSI B107.5M:1987. Accessories manufactured to: ANSI B107.10M:1982.
1/2
Accessories Order CodeYMT-593
Replacement Case -2920K
Accessories Order CodeYMT-593
Replacement Case -2910K
SE24M - 24 Piece Metric
Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm.
Accessories: ratchet handle, T-handle, speed brace, universal joint, 125 and 250mm extension bars.
SE24MA - 24 Piece Metric & InchSockets: 10, 11, 12, 13, 14, 16, 17, 19, 20 and 22mm. 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”, 7/8” and 15/16” AF.
Accessories: ratchet handle. speed brace, T-handle, universal joint, 125 and 250mm extension bars.
SE42MAW - 42 Piece Metric, Inch & WhitworthSockets: 10, 11, 12, 13, 14, 15, 17, 19, 20,21, 22, 24 and 27mm. 3/8”, 7/16”, 1/2”, 9/16”,5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”,
11/16”, 11/4” AF. 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”,9/16”, 5/8” BSW. Spark Plug Socket: M14 (21mm).Accessories: ratchet, T-handle, brace, universal joint, 125 and 250mm extension bars.
HOME IMPROVER
Model Number Weight Order CodeNumber of Pieces each SEN-582SE24M 24 4.00kg -0120KSE24MA 24 4.00kg -0160K
1/2
1/2
1/2
Number Weight Order Codeof Pieces each YMT-582
30 6.00kg -7992K
Number Weight Order Codeof Pieces each YMT-582
50 10.3kg -7994K
Number Weight Order Codeof Pieces each SEN-582
42 6.15kg -0180K
50PIECES
30PIECES
42PIECES
24PIECES
GROUP
582 SOCKETS SETS - 1/2” SQUARE DRIVE
Page518
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
M30MSH - 30 Piece Metric - Single HexagonSockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 30,32mm.
Spark Plug Sockets: M10 and M14. Accessories: quick release ratchet handle, universaljoint, sliding T-handle, 75, 125 and 250mm extensionbars. Supplied in a fitted impact-resistant plastic carrycase with a cushioned handle, snap-shut clasps andpadlock hasp hole.
1/2” Square Drive The most popular drive size used in the service and maintenance industries. Thispopularity is due to the strength and robust nature of 1/2” drive. All Kennedy Professional sockets have aknurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily.
The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round offexisting nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium-free to ensurenon-sparking. Chamfered leading edge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M : 1987, ANSI B107.1 : 1978 & BS 4006 : 1992. Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992.
M20M - 20 Piece Metric Sockets: 10, 11, 12, 13, 14, 15, 17, 19, 22,24, 27, 30, 32mm.Spark Plug Sockets: M10 and M14.
Accessories: quick release ratchet handle, sliding T-handle, universal joint, 125 and 250mmextension bars. Robust fitted case with security padlockhole and cushion grip handle.
M25M - 25 Piece MetricSockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,18, 19, 22, 24, 27, 30, 32mm. Spark Plug Sockets: M10 and M14.
Accessories: quick release ratchet handle, sliding T-handle, universal joint, 75, 125 and 250mmextension bars. Robust fitted case with security padlockhole and cushion grip handle.
1/2
Description Order CodeKEN-593
Replacement-2970KCase
Description Order CodeKEN-567
Locking-6000KClasps (Pair)
Accessories
Number Weight Order Codeof Pieces each KEN-582
30 5.55kg -7940K
1/2
1/2
Number Weight Order Codeof Pieces each KEN-582
20 4.90kg -7983K
Number Weight Order Codeof Pieces each KEN-582
25 4.90kg -7985K
Description Order CodeKEN-593
Replacement-2960KCase
Description Order CodeKEN-567
Locking-6000KClasps (Pair)
Accessories
20PIECES
25PIECES
30PIECES
SOCKET SETS - 1/2” SQUARE DRIVEGROUP
582
Page519
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
1/2” Square Drive The most popular drive size used in the service and maintenance industries. Thispopularity is due to the strength and robust nature of 1/2” drive. All Kennedy Professional sockets have aknurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily.
The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round offexisting nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium-free to ensurenon-sparking. Chamfered leading edge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M : 1987, ANSI B107.1 : 1978 & BS 4006 : 1992. Accessories manufactured to: ANSI B107.10M : 1982 & BS 4006 : 1992.
M30MA - 30 Piece Metric & InchSockets: 8, 9, 10, 11, 12, 13, 14, 15, 16,17, 18, 19, 22 and 24mm. 3/8”, 7/16”, 1/2”,9/16”, 5/8”, 11/16”, 3/4” 7/8” AF.
Spark Plug Sockets: M10 and M14. Accessories: quick release ratchet handle, slidingT-handle, universal joint, 75, 125 and 250mmextension bars. Robust fitted case with securitypadlock hole and cushion grip handle.
MD30MA - 30 Piece Deep Metric & InchSockets: 10, 11, 12, 13, 14, 15, 16, 17,18, 19, 21, 22, 24, 26, 27, 30, 32mm.1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”,
1”, 11/8” and 11/4” AF.Accessories: offset handle, swivel handle.Parts tray with magnetic insert. Robust fittedcase with security padlock hole and cushiongrip handle.
1/2
1/2
M30M - 30 Piece MetricSockets: 8, 9, 10, 11, 12, 13, 14, 15, 16,17, 18, 19, 20, 21, 22,23, 24, 25, 26,27, 30, 32mm.
Spark Plug Sockets: M10 and M14. Accessories: quick release ratchet handle, slidingT-handle, universal joint, 75, 125 and 250mmextension bars. Robust fitted case with securitypadlock hole and cushion grip handle.
1/2
Number Weight Order Codeof Pieces each KEN-582
30 5.50kg -7991K
Accessories Order CodeKEN-593
Replacement Case -2910K
Accessories Order CodeKEN-567
Locking Clasps (Pr) -6000K
Number Weight Order Codeof Pieces each KEN-582
330 5.30kg -7987K
Accessories Order CodeKEN-593
Replacement Case -2900K
Accessories Order CodeKEN-567
Locking Clasps (Pr) -6000K
Number Weight Order Codeof Pieces each KEN-582
30 12.2kg -7997K
Accessories Order CodeKEN-593
Replacement Case -2940K
Accessories Order CodeKEN-567
Locking Clasps (Pr) -6000K
30PIECES
30PIECES
30PIECES
GROUP
582 SOCKETS SETS - 1/2” SQUARE DRIVE
Page520
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
M70MAW - 70 Piece Metric, Inch & WhitworthSockets: 8, 9, 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 20, 21, 22, 23, 24,25, 26, 27, 28, 29, 30, 32, 33, 36mm.
5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 19/32”, 5/8”, 11/16”, 3/4”,13/16”, 7/8”, 15/16”, 1”, 11/16”, 11/8”, 13/16” and11/4”AF. 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”,9/16”, 5/8”, 11/16”, 3/4” Whit. Hex Bit Adaptors: 1/4” and 5/16”. Spark Plug Sockets: M10 and M14. Convertors: 1/2” sq. female x 3/4” sq. male,1/2” sq. female x 3/8” sq. male. Accessories: quick release ratchet handle,sliding T-handle, swivel handle, universaljoint, 75, 125, 250, and 450mm extensionbars, 125 and 250mm wobble extensions.Robust fitted case with security padlock holeand cushion grip handle.
MS50M - 50 Piece Metric with Driver Bits
Sockets: 8, 9, 10, 11, 12, 13, 14,15, 16, 17, 18, 19, 20, 21, 22, 23,24, 25, 26, 27, 28, 29, 30, 32, 33
and 36mm. Screwdriver Bits: Crosspoint No.2, No.3,No.4. Hex 4, 5, 6, 7, 8, 10, 12, 14, 17 and19mm. Screwdriver Bits: 9 and 14mmSpark Plug Sockets: M10 and M14. Accessories: Quick release ratchet handle,sliding T-handle, swivel handle, universal joint75, 125 and 250mm extension bars. Parts tray with magnetic insert. Robust fittedcase with security padlock hole and cushiongrip handle.
1/2
1/2
1/2” Square Drive Manufactured from industrial quality chrome vanadium steel with corrosion resistanthigh polish mirror finish, aluminium-free to ensure non-sparking. The 12 point bi-hexagonal side drivesockets allow higher torques to be applied to nuts without damage and grip worn nuts. The strength and
robust design of 1/2” drive make them suitable for the heavy use encountered in agriculture, service and maintenance industries.Sockets manufactured to: ANSI B107.5M:1987. Accessories manufactured to: ANSI B107.10M:1982.
1/2
50 Piece Metric, Inch & Whitworth Sockets: 8, 9, 10, 11, 12, 13, 14,15, 16, 17, 18, 19, 20, 21, 22, 24,27, 30 and 32mm. 5/16”, 3/8”, 7/16”,
1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”,1”, 11/16”, 11/8”, 11/4” A/F. 3/16”, 1/4”, 5/16”,3/8”, 7/16”, 1/2”, 9/16”, 5/8” Whit. Spark Plug Sockets: M14 and M10. Accessories: quick release flick lever ratchetwith rubber grip, T-handle, swivel handle withrubber grip, universal joint, extension bars125 and 250mm. Robust fitted case withmagnetic parts tray, padlock hole andcushion grip handle.
Number Weight Order Codeof Pieces each YMT-582
50 9.40kg -7996K
Accessories Order CodeYMT-593
Replacement Case -2950K
Number Weight Order Codeof Pieces each KEN-582
70 12.2kg -7995K
Accessories Order CodeKEN-593
Replacement Case -2930K
Accessories Order CodeKEN-567
Locking Clasps (Pr) -6000K
Number Weight Order Codeof Pieces each KEN-582
50 9.85kg -7993K
Accessories Order CodeKEN-567
Locking Clasps (Pr) -6000K
50PIECES
70PIECES
50PIECES
SOCKET SETS - 3/4” & 1” SQUARE DRIVEGROUP
582
Page521
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Number Weight Order Codeof Pieces each KEN-582
22 23.8kg -8720K
SH 26MA - 26 PieceMetric & Inch
Sockets: 22, 24, 27, 30, 32, 36, 38, 41,46, 50mm. 7/8”, 15/16”, 1”, 11/8”, 13/16”, 15/16”,13/8”, 17/16”, 15/8”, 13/4”, 17/8”, 2” AF.
Accessories: 100mm and 200mm extension bars, ratchet handle and T-handle.
Number Weight Order Codeof Pieces each SEN-582
26 18.0kg -0200K
L22M - 22 Piece Metric Bi-Hexagon Sockets: 22, 24, 26, 27, 29, 30, 32, 33, 36,38, 41, 46, 50, 55, 60mm.
Accessories: lever type ratchet, sliding T-handle, swivel handle, universal joint, 100, 200 and 410mm extension bars. Robust fitted case with security padlock holeand cushion grip handle.
3/4” Drive A heavy duty range designed to cope with the demands of industrial agriculture machinery andheavy plant, static or mobile. All Kennedy Professional sockets have a knurl feature to give a high grip whichis essential for a quick tool change when your hands are greasy/oily. The 12 point bi-hexagon side drive
design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. Manufactured fromchrome vanadium and are fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leadingedge ensures easy fastener location. Sockets manufactured to: ANSI B107.5M: 1987, ANSI B107.1: 1978 & BS 4006: 1992.Accessories manufactured to: ANSI B107.10M: 1982 & BS 4006: 1992.
15 Piece Metric Socket Set Sockets: 36, 41, 46, 50, 55, 60, 65, 70, 75, 80mm.
Accessories: ratchet and sliding T-handle, 550mm universal handle, 200 and 400mm extension bars.
L36MA - 36 Piece Metric & Inch Bi-Hexagon Sockets: 22, 24, 27, 29, 30, 32, 33, 36, 38, 41, 46,and 50mm. 7/8”, 15/16”, 1”, 11/16”, 11/8”,
13/16”, 11/4”, 15/16”, 13/8”, 17/16”, 11/2”, 15/8”, 111/16”,13/4”, 113/16”, 17/8”, 2” AF.Accessories: ratcheting head with 550mm universalhandle, sliding T-handle, 1” to 3/4” converter, 200 and 400mm extension bars.
3/4
3/4
3/4
1
HOME IMPROVER
Number Weight Order Codeof Pieces each KEN-582
36 29.3kg -8740K
Number Weight Order Codeof Pieces each KEN-582
15 18.0kg -9470K
15PIECES
36PIECES
22PIECES
26PIECES
GROUP
582 IMPACT SOCKETS
Page522
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Chrome Molybdenum Impact Sockets & Accessories
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
3/8” Drive Metric, Standard Length, 6-PointConform to: DIN 3129.
Socket Style Dimensions (mm) Weight Order Code(mm) D2 D1 L2 L each KEN-583
6 A 13.0 10.0 6.0 23.0 15g -0640K7 A 13.0 11.3 6.0 23.0 15g -0650K8 A 13.0 12.5 7.0 23.0 15g -0660K9 A 13.0 13.8 7.0 23.0 15g -0670K
10 A 13.0 15.0 7.0 23.0 17g -0680K11 A 13.0 16.3 8.0 23.0 20g -0690K12 B 13.0 17.0 8.0 23.0 17g -0700K13 B 13.0 18.8 8.0 23.0 22g -0710K14 B 13.0 20.0 8.0 23.0 20g -0720K
Socket Style Dimensions (mm) Weight Order Code(mm) D2 D1 L2 L each KEN-583
6 A 19.0 11.0 4.0 30.0 35g -1240K7 A 19.0 12.5 8.0 30.0 40g -1250K8 A 19.0 13.8 8.0 30.0 40g -1260K9 A 19.0 15.0 8.0 30.0 40g -1270K
10 A 19.0 16.0 8.0 30.0 40g -1280K11 A 19.0 17.5 9.0 30.0 40g -1290K12 B 19.0 19.0 9.0 30.0 40g -1300K13 A 22.0 20.0 9.0 30.0 55g -1310K14 A 22.0 21.0 9.0 30.0 55g -1320K15 B 22.0 22.0 11.0 30.0 55g -1330K16 C 22.0 24.0 11.0 30.0 60g -1340K17 C 22.0 25.0 11.0 30.0 60g -1350K18 C 22.0 26.0 11.0 30.0 60g -1360K19 C 22.0 27.5 11.0 30.0 70g -1370K20 C 22.0 28.0 12.0 30.0 70g -1380K21 C 22.0 30.0 13.0 30.0 70g -1390K22 C 24.0 32.0 13.0 30.0 85g -1400K
Socket Style Dimensions (mm) Weight Order Code(mm) D2 D1 L2 L each KEN-583
7 A 19.0 12.5 12.0 65.0 75g -1700K8 A 19.0 13.8 12.0 65.0 80g -1710K
10 A 19.0 16.0 12.0 65.0 80g -1720K11 A 19.0 17.5 25.0 65.0 80g -1730K12 B 19.0 19.0 25.0 65.0 90g -1740K13 A 22.0 20.0 25.0 65.0 120g -1750K14 A 22.0 21.0 25.0 65.0 120g -1650K15 B 22.0 22.0 25.0 65.0 120g -1760K16 C 22.0 24.0 25.0 65.0 140g -1770K17 C 22.0 25.0 25.0 65.0 140g -1780K18 C 22.0 26.0 25.0 65.0 150g -1790K19 C 22.0 27.5 25.0 65.0 170g -1800K21 C 22.0 30.0 25.0 65.0 185g -1820K
Style A Style B Style C
Socket Style Dimensions (mm) Weight Order Code(inch) D2 D1 L2 L each KEN-583
1/4” A 19.0 11.0 4.0 30.0 30g -1430K5/16” A 19.0 12.5 8.0 30.0 30g -1440K3/8” A 19.0 14.5 8.0 30.0 35g -1460K7/16” A 19.0 17.0 9.0 30.0 35g -1470K1/2” B 19.0 19.0 9.0 30.0 35g -1480K9/16” B 20.0 20.0 9.0 30.0 40g -1490K5/8” B 24.0 24.0 11.0 30.0 70g -1500K
11/16” B 24.0 24.0 11.0 30.0 70g -1510K3/4” B 26.0 26.0 11.0 30.0 80g -1520K
Socket Style Dimensions (mm) Weight Order Code(inch) D2 D1 L2 L each KEN-583
3/8” A 19.0 14.5 12.0 65.0 80g -1840K7/16” A 19.0 17.0 25.0 65.0 80g -1850K1/2” B 19.0 19.0 25.0 65.0 90g -1860K9/16” B 20.0 20.0 25.0 65.0 100g -1870K3/4” B 26.0 26.0 25.0 65.0 100g -1880K
3/8” Drive Inch Size, Deep Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
3/8
3/8” Drive Inch Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
Style A Style B Style C
Style A Style B
1/4” Drive Metric, Standard Length, 6-PointConform to: DIN 3129.1/4
3/8
Universal Ball JointsManufactured from high quality chromemolybdenum steel. Black oxidisedfinish with permanent laser etchedmarkings.Sizes 1/2” and above feature a hole toaccommodate a pin and ring to preventaccidental removal for added security.
Male Drive x Weight Order CodeFemale Drive each KEN-583
1/2” x 1/2” 140g -7840K3/4” x 3/4” 640g -7860K1” x 1” 1400g -7880K
Male Drive x Weight Order CodeFemale Drive each KEN-583
3/8” x 1/4” 40g -7380K1/4” x 3/8” 40g -7400K1/2” x 3/8” 70g -7410K3/8” x 1/2” 70g -7420K3/4” x 1/2” 175g -7430K1/2” x 3/4” 335g -7440K1” x 3/4” 460g -7450K3/4” x 1” 670g -7460K
11/2” x 1” 900g -7480K
Square Drive Reducers & AdaptorsManufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Sizes 1/2” and above feature a hole to accommodate a pin and ring to prevent accidental removal for added security.
3/8
3/8
3/8” Drive Metric, Deep Length, 6-PointConform to: DIN 3129.
IMPACT SOCKETSGROUP
583
Page523
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Socket Style Dimensions (mm) Weight Order Code(mm) D2 D1 L2 L each KEN-58310 A 25.0 17.5 14.0 78.0 170g -2600K11 A 25.0 18.7 14.0 78.0 170g -2610K12 A 25.0 20.0 14.0 78.0 175g -2620K13 A 25.0 21.0 14.0 78.0 180g -2630K14 A 25.0 22.5 17.0 78.0 210g -2640K15 A 30.0 23.7 17.0 78.0 200g -2650K16 A 30.0 25.0 17.0 78.0 200g -2660K17 A 30.0 26.0 17.0 78.0 260g -2670K18 A 30.0 27.5 17.0 78.0 270g -2680K19 A 30.0 28.7 19.0 78.0 260g -2690K21 B 30.0 30.0 24.0 78.0 260g -2700K22 C 30.0 32.0 24.0 78.0 290g -2710K23 C 30.0 32.0 24.0 78.0 290g -2720K24 C 30.0 35.0 24.0 78.0 290g -2730K27 C 30.0 38.7 54.0 78.0 330g -2740K28 C 30.0 40.0 54.0 78.0 350g -2750K30 C 30.0 42.0 54.0 78.0 450g -2760K32 C 30.0 44.0 54.0 78.0 370g -2770K1/2” Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.
Socket Style Dimensions (mm) Weight Order Code(inch) D2 D1 L2 L each KEN-583
3/8” A 22.0 16.0 12.0 38.0 70g -2270K7/16” A 22.0 18.0 12.0 38.0 70g -2280K1/2” A 22.0 20.0 12.0 38.0 70g -2290K9/16” A 24.0 22.0 12.0 38.0 80g -2300K5/8” B 25.0 25.0 12.0 38.0 85g -2320K
11/16” B 26.0 26.0 13.0 38.0 90g -2330K3/4” B 28.0 28.0 13.0 38.0 100g -2340K
13/16” B 30.0 30.0 13.0 38.0 125g -2350K7/8” B 32.0 32.0 13.0 38.0 150g -2360K
15/16” B 34.0 34.0 13.0 38.0 170g -2370K1” B 36.0 36.0 14.0 38.0 190g -2380K
11/16” B 38.0 38.0 16.0 40.0 205g -2390K11/8” C 38.0 40.0 16.0 40.0 235g -2400K13/16” C 38.0 42.0 16.0 40.0 255g -2410K11/4” C 38.0 44.0 18.0 40.0 270g -2420K
1/2” Drive BSW Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
Socket Style Dimensions (mm) Weight Order Code(BSW) D2 D1 L2 L each KEN-583
5/16” A 30.0 25.0 12.0 38 140g -2510K3/8” A 30.0 27.5 13.0 38 140g -2520K7/16” B 30.0 30.0 13.0 38 140g -2530K1/2” C 30.0 35.0 20.0 45 190g -2540K9/16” C 30.0 38.0 22.0 50 210g -2550K5/8” C 30.0 40.0 22.0 50 305g -2560K
11/16” C 30.0 44.0 28.0 50 305g -2570K3/4” C 30.0 44.0 28.0 50 305g -2580K
Style A Style B Style C
1/2” Drive Metric, Standard Length, 6-PointConform to: DIN 3129.
Socket Style Dimensions (mm) Weight Order Code(mm) D2 D1 L2 L each KEN-583
9 A 25.0 16.0 12.0 38.0 90g -2010K10 A 25.0 17.5 12.0 38.0 90g -2020K11 A 25.0 18.7 12.0 38.0 95g -2030K12 A 25.0 20.0 12.0 38.0 100g -2040K13 A 25.0 21.0 12.0 38.0 100g -2050K14 A 25.0 22.5 12.0 38.0 100g -2060K15 A 30.0 23.7 12.0 38.0 140g -2070K16 A 30.0 25.0 12.0 38.0 140g -2080K17 A 30.0 26.0 13.0 38.0 140g -2090K18 A 30.0 27.5 13.0 38.0 140g -2100K19 A 30.0 28.7 13.0 38.0 140g -2110K20 B 30.0 30.0 13.0 38.0 140g -2120K21 B 30.0 30.0 13.0 38.0 130g -2130K22 C 30.0 32.0 13.0 38.0 140g -2140K23 C 30.0 32.0 13.0 38.0 140g -2150K24 C 30.0 35.0 20.0 45.0 180g -2160K26 C 30.0 38.0 22.0 50.0 200g -2180K27 C 30.0 38.7 22.0 50.0 310g -2190K28 C 30.0 40.0 22.0 50.0 230g -2200K30 C 30.0 42.0 22.0 50.0 230g -2220K32 C 30.0 44.0 28.0 50.0 250g -2230K36 C 30.0 49.0 28.0 50.0 250g -2250K
1/2
Socket Style Dimensions (mm) Weight Order Code(inch) D2 D1 L2 L each KEN-583
3/8” A 22.0 16.0 14.0 78.0 140g -2780K7/16” A 22.0 18.0 14.0 78.0 160g -2790K1/2” A 22.0 20.0 14.0 78.0 200g -2800K9/16” A 24.0 22.0 17.0 78.0 180g -2810K5/8” B 24.0 24.0 17.0 78.0 210g -2820K
11/16” B 26.0 26.0 17.0 78.0 190g -2830K3/4” B 28.0 28.0 19.0 78.0 235g -2840K
13/16” B 30.0 30.0 24.0 78.0 260g -2850K7/8” B 32.0 32.0 24.0 78.0 290g -2860K
15/16” B 34.0 34.0 24.0 78.0 340g -2870K1” B 36.0 36.0 24.0 78.0 340g -2880K
11/16” B 38.0 38.0 24.0 78.0 440g -2890K11/8” C 38.0 40.0 54.0 78.0 410g -2900K
1/2” Drive Inch Size, Deep Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
Socket Style Dimensions (mm) Weight Order Code(BSW) D2 D1 L2 L each KEN-583
5/16” A 30.0 25.0 17.0 78 200g -2910K3/8” A 30.0 27.5 17.0 78 250g -2920K7/16” B 30.0 30.0 24.0 78 300g -2930K1/2” C 30.0 35.0 24.0 78 360g -2940K9/16” C 30.0 38.7 54.0 78 440g -2950K5/8” C 30.0 40.0 54.0 78 480g -2960K
11/16” C 30.0 44.0 54.0 78 500g -2970K3/4” C 30.0 44.0 54.0 78 450g -2980K
1/2” Drive BSW Size, Deep Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
1/2” Drive Metric, Deep Length, 6-PointConform to: DIN 3129.
1/2
Style A Style B Style C
Chrome Molybdenum Impact Sockets
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
1/2
1/2
1/2
1/2
GROUP
583 IMPACT SOCKETS
Page524
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Style A Style B Style C
Chrome Molybdenum Impact Sockets
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
Socket Style Dimensions (mm) Weight Order Code(mm) D2 D1 L2 L each KEN-58316 A 44.0 27.0 12.0 50.0 350g -3090K17 A 44.0 31.0 12.0 50.0 405g -3100K18 A 44.0 32.0 12.0 50.0 400g -3110K19 A 44.0 33.0 14.0 50.0 405g -3120K20 A 44.0 34.0 16.0 50.0 400g -3130K21 A 44.0 35.0 16.0 50.0 415g -3140K22 A 44.0 37.0 16.0 50.0 410g -3150K23 A 44.0 38.0 16.0 50.0 410g -3160K24 A 44.0 39.0 16.0 50.0 415g -3170K25 A 44.0 40.0 16.0 50.0 400g -3180K26 A 44.0 41.0 16.0 50.0 400g -3190K27 A 44.0 43.0 16.0 54.0 435g -3200K28 B 44.0 44.0 23.0 54.0 400g -3210K29 C 44.0 45.0 23.0 54.0 410g -3220K30 C 44.0 47.0 23.0 54.0 440g -3230K32 C 44.0 49.0 23.0 56.0 470g -3240K33 C 44.0 51.0 23.0 56.0 510g -3250K34 C 44.0 52.0 23.0 56.0 515g -3260K35 C 44.0 53.0 23.0 56.0 515g -3270K36 C 44.0 54.0 23.0 56.0 520g -3280K38 C 44.0 57.0 24.0 58.0 590g -3300K41 C 44.0 60.0 24.0 58.0 630g -3310K42 C 44.0 62.0 24.0 58.0 650g -3320K46 C 44.0 67.0 27.0 63.0 655g -3330K47 C 44.0 68.0 32.0 68.0 1150g -3340K50 C 44.0 71.0 35.0 72.0 1200g -3350K
3/4” Drive Inch Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
Socket Style Dimensions (mm) Weight Order Code(inch) D2 D1 L2 L each KEN-583
5/8” A 38.0 27.5 12.0 50 250g -3360K11/16” A 38.0 29.0 12.0 50 250g -3370K
3/4” A 38.0 30.0 14.0 50 240g -3380K13/16” A 38.0 32.0 16.0 52 250g -3390K
7/8” A 38.0 34.0 16.0 52 265g -3400K15/16” A 38.0 36.0 16.0 52 270g -3410K1” C 38.0 40.0 16.0 52 300g -3420K
11/16” C 38.0 40.0 16.0 52 285g -3430K11/8” B 42.0 42.0 20.0 52 300g -3440K13/16” B 44.0 44.0 20.0 52 390g -3450K11/4” B 44.0 44.0 20.0 52 370g -3460K15/16” C 44.0 47.0 23.0 56 415g -3470K13/8” C 44.0 50.0 23.0 56 470g -3480K17/16” C 44.0 51.0 23.0 56 475g -3490K11/2” C 44.0 53.0 23.0 56 635g -3500K15/8” C 44.0 58.0 27.0 62 610g -3520K
111/16” C 44.0 63.5 27.0 62 630g -3530K13/4” C 44.0 65.0 27.0 62 770g -3540K
113/16” C 44.0 67.0 32.0 68 795g -3550K17/8” C 44.0 68.0 32.0 68 940g -3560K
Style A Style B Style C
Socket Style Dimensions (mm) Weight Order Code(BSW) D2 D1 L2 L each KEN-583
9/16” A 44.0 41.0 16.0 50 300g -3620K11/16” C 44.0 49.0 23.0 56 350g -3640K
3/4” C 44.0 51.0 23.0 56 490g -3650K7/8” C 44.0 57.0 24.0 58 630g -3670K1” C 44.0 62.0 24.0 58 300g -3690K
11/8” C 44.0 68.0 32.0 68 335g -3710K11/4” C 44.0 71.0 35.0 72 1200g -3720K
3/4” Drive BSW Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
3/4” Drive Metric, Deep Length, 6-PointConform to: DIN 3129.3/4
3/4” Drive Inch Size, Deep Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
Socket Style Dimensions (mm) Weight Order Code(inch) D2 D1 L2 L each KEN-583
3/4” A 38.0 30.0 23.0 85.0 400g -4160K7/8” A 38.0 34.0 23.0 85.0 430g -4180K
15/16” A 38.0 36.0 41.0 85.0 425g -4190K1” C 38.0 40.0 41.0 85.0 425g -4200K
11/16” C 38.0 40.0 52.0 85.0 425g -4210K11/8” B 42.0 42.0 52.0 85.0 520g -4220K13/16” B 44.0 44.0 52.0 85.0 520g -4230K11/4” C 44.0 49.0 52.0 85.0 530g -4240K15/16” C 44.0 50.0 52.0 85.0 595g -4250K17/16” C 44.0 51.0 52.0 85.0 600g -4270K11/2” C 44.0 57.0 60.0 95.0 700g -4280K17/8” C 44.0 68.0 58.0 95.0 800g -4340K
Socket Style Dimensions (mm) Weight Order Code(BSW) D2 D1 L2 L each KEN-583
3/4” C 44.0 51.0 62.0 95 440g -4450K
3/4” Drive BSW Size, Deep Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
3/4” Drive Metric, Standard Length, 6-PointConform to: DIN 3129.3/4
3/4
3/4
To Suit Square Weight Order CodeOutside Dia. Drive each KEN-58338 - 44mm 3/4” 8g -8200K48 - 54mm 3/4” 16g -8210K46 - 58mm 1” 16g -8300K
62mm 1” 18g -8310K78 - 86mm 1” 31g -8320K
Retaining Ring & Pin
3/4
3/4
Socket Style Dimensions (mm) Weight Order Code(mm) D2 D1 L2 L each KEN-58317 A 44.0 31.0 20.0 95.0 605g -3810K18 A 44.0 32.0 20.0 95.0 610g -3820K19 A 44.0 33.0 23.0 95.0 625g -3830K21 A 44.0 35.0 23.0 95.0 630g -3850K22 A 44.0 37.0 23.0 95.0 650g -3860K24 A 44.0 39.0 51.0 95.0 660g -3880K25 A 44.0 40.0 51.0 95.0 735g -3890K26 A 44.0 41.0 51.0 95.0 420g -3900K27 A 44.0 43.0 62.0 95.0 420g -3910K28 B 44.0 44.0 62.0 95.0 450g -3920K30 C 44.0 47.0 62.0 95.0 750g -3940K32 C 44.0 49.0 62.0 95.0 860g -3960K33 C 44.0 51.0 62.0 95.0 850g -3970K34 C 44.0 52.0 62.0 95.0 850g -3980K36 C 44.0 54.0 62.0 95.0 880g -4000K38 C 44.0 57.0 60.0 95.0 930g -4020K41 C 44.0 60.0 60.0 95.0 1100g -4050K42 C 44.0 62.0 60.0 95.0 1150g -4060K46 C 44.0 67.0 58.0 95.0 1200g -4100K47 C 44.0 68.0 58.0 95.0 1300g -4110K
IMPACT SOCKETSGROUP
583
Page525
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
1” Drive Metric, Deep Length, 6-PointConform to: DIN 3129.1
Chrome Molybdenum Impact Sockets
Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.
1” Drive Metric, Standard Length, 6-PointConform to: DIN 3129.
Socket Style Dimensions (mm) Weight Order Code(inch) D2 D1 L2 L each KEN-583
7/8” A 51.0 39.0 17.0 58.0 700g -5610K1” A 51.0 42.0 17.0 58.0 680g -5630K
11/16” A 51.0 44.0 17.0 58.0 710g -5640K11/8” A 51.0 46.0 19.0 58.0 550g -5650K11/4” B 51.0 51.0 21.0 60.0 570g -5670K15/16” C 52.0 53.0 21.0 62.0 680g -5680K17/16” C 52.0 56.0 26.0 62.0 680g -5700K11/2” C 52.0 58.0 26.0 62.0 700g -5710K19/16” C 52.0 58.0 26.0 62.0 680g -5720K15/8” C 52.0 61.5 26.0 62.0 680g -5730K
111/16” C 52.0 65.0 27.0 64.0 1100g -5740K13/4” C 58.0 66.0 27.0 64.0 1000g -5750K
113/16” C 58.0 68.0 27.0 64.0 1000g -5760K17/8” C 58.0 70.0 28.0 66.0 1500g -5770K2” C 58.0 74.0 31.0 70.0 1700g -5790K
21/16” C 58.0 75.0 31.0 70.0 1200g -5800K21/8” C 58.0 78.0 31.0 70.0 1400g -5810K23/16” C 62.0 80.0 32.0 72.0 1600g -5820K21/4” C 62.0 84.0 34.0 75.0 1600g -5830K23/8” C 62.0 87.0 35.0 78.0 1700g -5850K21/2” C 62.0 91.0 36.0 80.0 1900g -5870K29/16” C 62.0 93.0 36.0 80.0 1900g -5880K25/8” C 62.0 95.0 38.0 82.0 1900g -5890K23/4” C 62.0 98.0 40.0 85.0 2000g -5910K3” C 86.0 106.0 52.0 98.0 2300g -5950K
31/8” C 86.0 109.0 52.0 100.0 3700g -5970K
Style A Style B Style C
1
Socket Style Dimensions (mm) Weight Order Code(mm) D2 D1 L2 L each KEN-58323 A 54.0 41.0 21.0 100.0 1100g -6250K24 A 54.0 42.0 21.0 100.0 1100g -6260K27 A 54.0 46.0 23.0 100.0 1200g -6290K28 A 54.0 47.0 23.0 100.0 1200g -6300K30 A 54.0 50.0 50.0 100.0 1200g -6320K32 A 54.0 52.0 50.0 100.0 1200g -6340K33 A 54.0 53.0 50.0 100.0 1200g -6350K34 B 54.0 55.0 50.0 100.0 1200g -6360K36 B 54.0 56.0 64.0 100.0 1200g -6380K38 B 54.0 59.0 64.0 100.0 1300g -6400K41 B 54.0 63.0 64.0 100.0 1300g -6430K42 B 54.0 64.0 64.0 100.0 1300g -6440K46 B 54.0 69.0 62.0 100.0 1500g -6480K50 B 54.0 74.0 62.0 100.0 1600g -6520K52 B 54.0 77.0 60.0 100.0 1600g -6540K55 B 54.0 80.0 60.0 100.0 2600g -6570K56 B 54.0 81.0 65.0 105.0 2600g -6580K60 B 54.0 86.0 77.0 120.0 2600g -6630K65 B 54.0 92.0 80.0 125.0 2600g -6660K70 B 54.0 99.0 80.0 125.0 2700g -6680K75 B 86.0 109.0 87.0 135.0 2700g -6700K80 B 86.0 109.0 87.0 135.0 2800g -6720K
Socket Style Dimensions (mm) Weight Order Code(mm) D2 D1 L2 L each KEN-58330 54.0 56.0 21.0 78.0 -8430K32 86.0 58.0 22.0 78.0 -8432K33 86.0 60.0 22.0 78.0 -8433K36 86.0 64.0 24.0 78.0 -8436K38 86.0 66.0 26.0 80.0 -8438K41 86.0 70.0 28.0 80.0 -8441K46 86.0 76.0 30.0 84.0 -8446K48 86.0 79.0 32.0 87.0 -8448K50 86.0 81.0 32.0 87.0 -8450K52 86.0 83.0 34.0 87.0 -8452K55 86.0 87.0 37.0 90.0 -8455K56 86.0 88.0 37.0 92.0 -8456K60 86.0 94.0 39.0 95.0 -8460K65 86.0 100.0 42.0 100.0 -8465K70 86.0 106.0 46.0 105.0 -8470K75 86.0 112.0 49.0 108.0 -8475K80 86.0 119.0 53.0 115.0 -8480K85 86.0 125.0 56.0 118.0 -8485K95 95.0 137.0 61.0 123.0 -8495K
1” Drive Inch Size, Deep Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
Style A Style B Style C
Socket Style Dimensions (mm) Weight Order Code(inch) D2 D1 L2 L each KEN-58311/8” A 54.0 46.0 23.0 100.0 1200g -6780K13/16” A 51.0 48.0 40.0 90.0 1200g -6790K11/4” B 51.0 51.0 40.0 90.0 1200g -6800K15/16” C 52.0 53.0 40.0 90.0 1000g -6810K13/8” C 52.0 54.0 40.0 90.0 1000g -6820K11/2” C 52.0 58.0 54.0 92.0 1000g -6840K15/8” C 52.0 61.5 54.0 92.0 1000g -6860K
111/16” C 52.0 65.0 54.0 92.0 1000g -6870K13/4” C 58.0 66.0 54.0 92.0 1000g -6880K
113/16” C 58.0 68.0 54.0 92.0 1000g -6890K17/8” C 58.0 70.0 54.0 92.0 1000g -6900K21/4” C 62.0 84.0 60.0 100.0 2070g -6960K23/8” C 62.0 87.0 62.0 105.0 2400g -6980K27/8” C 62.0 102.0 80.0 128.0 2900g -7060K
Socket Style Dimensions (mm) Weight Order Code(mm) D2 D1 L2 L each KEN-583
21 A 54.0 37.5 17.0 58.0 675g -5050K22 A 54.0 40.0 17.0 58.0 790g -5060K24 A 54.0 42.0 17.0 58.0 680g -5080K25 A 54.0 43.0 17.0 58.0 670g -5090K26 A 54.0 44.5 17.0 58.0 660g -5100K27 A 54.0 46.0 17.0 58.0 695g -5110K28 A 54.0 47.0 17.0 58.0 670g -5120K29 A 54.0 48.0 19.0 60.0 725g -5130K30 A 54.0 50.0 21.0 60.0 730g -5140K32 A 54.0 52.0 21.0 60.0 715g -5160K33 A 54.0 53.0 21.0 60.0 715g -5170K34 B 54.0 55.0 21.0 62.0 720g -5180K35 B 54.0 55.0 21.0 62.0 740g -5190K36 B 54.0 56.0 30.0 65.0 740g -5200K37 B 54.0 59.0 30.0 65.0 720g -5210K38 B 54.0 59.0 30.0 65.0 780g -5220K41 B 54.0 63.0 31.0 67.0 900g -5250K42 B 54.0 64.0 36.0 74.0 1100g -5260K46 B 54.0 69.0 36.0 74.0 1050g -5290K47 B 54.0 72.0 36.0 74.0 1000g -5300K48 B 54.0 73.0 36.0 74.0 1000g -5310K50 B 54.0 74.0 42.0 80.0 1300g -5330K52 B 54.0 77.0 44.0 84.0 1500g -5350K55 B 54.0 80.0 44.0 84.0 1600g -5380K56 B 54.0 81.0 44.0 84.0 1750g -5390K60 B 54.0 86.0 44.0 87.0 1800g -5430K65 B 54.0 92.0 46.0 90.0 2100g -5460K70 B 54.0 99.0 51.0 96.0 2400g -5480K75 B 86.0 104.0 52.0 98.0 3500g -5500K80 B 86.0 109.0 52.0 100.0 3700g -5520K85 B 86.0 115.0 52.0 100.0 3800g -5530K90 B 86.0 119.0 55.0 105.0 3800g -5550K95 B 86.0 130.0 55.0 105.0 3900g -5570K
100 B 86.0 140.0 55.0 105.0 3900g -5580K
1” Drive Inch Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.1
1
11/2” Drive Metric Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.11/2
1” Drive BSW Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.
Socket Style Dimensions (mm) Weight Order Code(BSW) D2 D1 L2 L each KEN-583
3/4” B 54.0 55.0 21.0 62 700g -6090K1” B 54.0 64.0 36.0 74 700g -6130K
11/8” B 54.0 73.0 36.0 74 800g -6140K
1
GROUP
583 IMPACT SOCKETS
Page526
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to Metric DIN 3129, Inch SAE USA Federal Standard GGG-W-660A.
Hex Driver Impact Sockets 3/8” Sq. Dr.
Hexagon sizes:4, 5, 6, 7, 8, 10
and 12mm. Conforms to DIN 3129.
Size Overall Weight Order Code(mm) Length each KEN-583
4 50mm 40g -1960K5 50mm 45g -1962K6 50mm 45g -1964K7 50mm 45g -1966K8 50mm 50g -1968K10 50mm 60g -1970K12 50mm 70g -1972K
7 Piece SetContents as above.
Size Overall Weight Order CodeLength each KEN-583
T40 55mm 80g -3060KT45 55mm 80g -3062KT47 55mm 85g -3064KT50 55mm 85g -3066KT55 55mm 90g -3068KT60 55mm 95g -3070KT70 55mm 105g -3072K
Number Weight Order Codeof Pieces each KEN-583
16 1.91kg -9884K
Impact TX Bit Driver Sockets 1/2” Sq. Dr.
TX drivers: T40, T45, T47,
T50, T55, T60 and T70.
16 Piece Set Contents:TX drivers (length 55mm): T40, T45, T47, T50, T55, T60, T70.
TX sockets: E10, E11, E12, E14, E16, E18,E20, E22, E24.Conform to DIN 3129. Supplied in tough, impact-resistant plastic storage case.
Impact Hexagon Bit Drivers 1/2” Sq. Dr.
Hexagon sizes:6, 7, 8, 10, 12, 14,
15, 17, 18 and 19mm.
Size Overall Weight Order Code(mm) Length each KEN-583
6 75mm 95g -3010K7 75mm 95g -3012K8 75mm 105g -3014K10 75mm 120g -3016K12 75mm 130g -3018K14 75mm 150g -3020K15 75mm 155g -3022K17 75mm 175g -3024K18 75mm 195g -3026K19 75mm 200g -3028K
Number Weight Order Codeof Pieces each KEN-583
10 1.76kg -9882K
10 Piece SetContents as above.
Impact Wheel Nut Sockets 1/2” Sq. Dr.
Socket sizes: 17, 19 and 21mm. Colour coded for easy identification.Can be used with retainer rings or pins.
Size Overall Weight Order Code(mm) Length each KEN-58317 85mm 225g -3080K19 85mm 225g -3082K21 85mm 255g -3084K
Number Weight Order Codeof Pieces each KEN-583
3 895g -9886K
3 Piece SetContents as above.
Size Overall Weight Order CodeLength each KEN-583
E10 40mm 70g -3040KE11 40mm 70g -3042KE12 40mm 70g -3044KE14 45mm 75g -3046KE16 45mm 75g -3048KE18 45mm 75g -3050KE20 45mm 115g -3052KE22 45mm 140g -3054KE24 45mm 145g -3056K
Impact TX Sockets 1/2” Sq. Dr.
1/2 1/2
1/2
Number Weight Order Codeof Pieces each KEN-583
7 550g -9820K
Extension BarsManufactured from high quality chromemolybdenum steel. Black oxidised finish
with permanent laser etched markings.Sizes 1/2” and above feature a hole toaccommodate a pin and ring to preventaccidental removal for added security.
1/2
Length Weight Order Code(mm) each KEN-583
1/4” Square Drive50 (2”) 24g -7490K100 (4”) 43g -7495K
3/8” Square Drive75 (3”) 80g -7500K 150 (6”) 160g -7510K
1/2” Square Drive125 (5”) 230g -7520K150 (6”) 270g -7530K250 (10”) 445g -7540K300 (12”) 620g -7550K380 (15”) 740g -7560K
3/4” Square Drive100 (4”) 470g -7570K150 (6”) 810g -7580K230 (9”) 900g -7600K250 (10”) 1350g -7610K300 (12”) 1500g -7620K380 (15”) 1900g -7640K
1” Square Drive100 (4”) 590g -7650K150 (6”) 610g -7660K200 (8”) 1000g -7680K250 (10”) 2100g -7690K300 (12”) 2500g -7700K380 (15”) 2600g -7720K
7PIECES 10
PIECES
16PIECES
3PIECES
3/8
1/2
1/2
Page527
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
IMPACT SOCKETSGROUP
583
Hub Nut Impact Socket Set - 7 PieceThese extra deep sockets are six point single hexagon with ablack oxidised finish and conform to DIN 3129, Inch SAE andUSA Federal Standard GGG-W-660A.
Impact resistant storage case. Socket sizes: 29, 30, 32, 34, 35, 36 and 38mm.
Number Weight Order Codeof Pieces each KEN-583
7 5.3kg -9888K
Number Weight Order Codeof Pieces each KEN-583
7 5.95kg -9920K
1/2
Impact 3/8” Sq. Dr.Extractor Sockets
Square Drive Impact Extractor SocketsExtracts rounded, seized or painted right hand threaded fasteners, the reverse spiralflutes are designed
to bite into seized nuts andbolts providing greater grip forextraction. The ejector pin isto drive out the fastenersfrom sockets, once removed.Contents: 10, 11, 12, 13,14, 15, 16, 17 and 19mmextractor sockets plus ejector pin.
Individual Extractor Sockets
9 Piece Set - MetricStandard length: 10, 12, 13, 14, 17,19, 24, 27 and 30mm.
7 Piece Set - MetricStandard length: 19, 24, 27, 30, 32, 36 and 46mm.
39 Piece Set - Metric & InchStandard length: metric 6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16, 17, 18,19, 20, 21 and 22mm.
Standard length: A/F 1/4”, 5/16”, 3/8”, 7/16”,1/2”, 9/16”, 5/8”, 11/16”, and 3/4”. Deep metric: 7, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 and 21mm.
18 Piece Set - MetricStandard length: 10, 11, 12, 13, 14,15, 16, 17, 18, 19, 20, 21, 22, 24,26, 27, 30 and 32mm.
7 Piece Set - Deep Metric10, 13, 14, 17, 19, 24 and 30mm.
Replacement Ejector Pin
12 Piece Set - MetricStandard length: 6, 7, 8, 9, 10, 11,12, 13 and 14mm.
Accessories: 50 and 100mm extensions. 3/8” F to 1/4” M adaptor.
1/4
3/8 1/2
1/21/2
3/4
7 Piece Impact Socket Set
Socket sizes: 27, 30, 32, 33, 36, 41 and 46mm.
Number Weight Order Codeof Pieces each KEN-583
9 1.70kg -9870K
1
Number Weight Order Codeof Pieces each KEN-583
7 4.20kg -9890K
Number Weight Order Codeof Pieces each KEN-583
18 3.40kg -9860K
Number Weight Order Codeof Pieces each KEN-583
39 3.50kg -9810K
Number Weight Order Codeof Pieces each KEN-583
12 625g -9760K
Number Weight Order Codeof Pieces each KEN-583
7 2.20kg -9880K
To Suit Weight Order Codeeach KEN-583
SSE10M 11g -7960K
Size Weight Order Code(mm) each KEN-58310 33g -1980K11 34g -1981K12 35g -1982K13 36g -1983K14 37g -1984K15 51g -1985K16 57g -1986K17 68g -1987K19 85g -1989K
Product Sizes Weight Order CodeNumber (mm) each KEN-583SSE10M 10 - 19 660g -9800K
Impact Socket SetsThe sockets are manufactured from the highest quality chrome molybdenum steel which is clearly laser etched with the size for easyand rapid identification. Tough, impact-resistant carry case. Conforms to: Metric DIN 3129, Inch SAE USA Federal Standard GGG-W-660A.
3/8
18PIECES
7PIECES
7PIECES12
PIECES
39PIECES
9PIECES
7PIECES
7PIECES
GROUP
588 BASIN WRENCHES, CHAIN SEPARATORS/WRENCHES & SERVICE KEYS
Page528
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Immersion Heater Box Spanner This heavy duty box spannercomplete with tommy bar willreach recessed elementson most hot watertanks.
Self Adjusting Basin Wrenches
Heavy DutyWith spring loaded jaws of hardened forged and milled steel. Jaw swivels 180°allowing easy tightening and loosening of basin nuts on both 15mm and 22mm pipes.
With sliding tommy bar.
Capacity: 10 - 32mm (3/8” - 11/4”).
Overall Weight Order CodeLength each KEN-588265mm 520g -6020K
Capacity Weight Order Codeeach KEN-588
86mm 520g -6050K
Back Spanner Basin WrenchesFor use in vertical or horizontal confined spaces. Grips on smooth and oily surfaces. Double ended wrench for 13mm (1/2”) and 32mm (11/4”) lavatory and basin nuts. Made from cast iron.
Overall Weight Order CodeLength each KEN-588350mm 590g -6000K
Telescopic Type Basin WrenchBox section extending shank with spring loaded retainer. Spring loaded jaws of hardened forged and milled steel.
Jaw swivels 180° allowing easy
tightening and loosening of basin
nuts on both 15mm and 22mm pipes.
With sliding tommy bar. Capacity: 10 - 32mm
(3/8” - 11/4”).
Brass Radiator KeySquare opening brass key for use ondomestic radiator bleed screws with easy toturn clock key type handle for releasing airfrom water filled radiators.
Multi Key - 4 WayFor gas, water and electric meter boxes, air conditioning units, stop valves, mainsconsoles etc., centralheating pump cocks, some radiator valves and drain off valves.
Meter Box KeyPlastic meter box key, fits gas and electricmeter boxes. With easy turn handle andkeyring hole. Overall length: 70mm.
Type Weight Order Codeeach KEN-588
Radiator Key 10g -6070K
Type Weight Order Codeeach KEN-588
4 Way Key 75g -6060K
Type Weight Order Codeeach KEN-588
Meter Box 6g -6040KKey
Adjustable StrapIndustrial strength rubber strap. Strap can beeasily adjusted and used on irregular shapes.
Chain Pipe WrenchesFor gripping tubes, piping and irregularshaped objects. The chain is looped aroundthe object and locked on the head. The headwill automatically grip in the direction of theturn and the object can be rotated. The headis double ended and fully reversible for longertool life.Manufactured from hardened and temperedcarbon steel to US specification GG-W-651.
Diameter Length Order Code(mm) (mm) KEN-588
63 (21/2”) 525 (21”) -4500K100 (4”) 600 (24”) -4520K
Product Weight Order CodeNumber each KEN-588SCS1 445g -1010KLCS2 765g -1020K
Chain SeparatorsAll steel construction, industryquality roller and bush chainseparator. Designed for separatingroller and bush chains that haveend softened pins, to removehardened pins the ends must firstbe removed by grinding. Simple tooperate grip the chain in the self-closing jaws that also supports thechain to prevent twisting as the linkpins are driven out. Then turn the T-handle to drive the pins out.Always ensure that the machine isswitched off before disconnectingor connecting a chain.
Roller ChainPin, roller and bushassembly.
Bush ChainIdentical to rollerchain, but with theomission of the roller.
Model LCS2 Chain: 19.05 - 31.75mm (0.75 - 1.25”)pitch, to BS standard. Chain: 19.05 - 25.40mm (0.75 - 1.00”)pitch, to ANSI standard.
Pitch
Model SCS1 Chain: 9.525 - 15.875mm (0.375” - 0.625”) pitch, to BS & ANSI standard.
Capacity Weight Order Code(mm) each KEN-588
15 to 150 600g -1500K
Overall Weight Order CodeLength each KEN-588245mm 840g -6030K
DRAINAGE EQUIPMENTGROUP
588
Page529
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Colour Weight Order Codeeach KEN-588
Green 200g -7700KRed 200g -7710KBlue 200g -7720K
Capacity Weight Order Codeeach KEN-588
10 Rods 160g -7280K
Type Weight Order Codeeach KEN-588
Universal 190g -7240K
Type Weight Order Codeeach KEN-588
Lockfast 245g -7250K
Drop ScraperGlides over small obstructions and drops intoa vertical position toallow material to be dragged back.
Size Type Order CodeKEN-588
100mm (4”) Universal -7380K100mm (4”) Lockfast -7390K150mm (6”) Universal -7460K150mm (6”) Lockfast -7470K
Size Type Order CodeKEN-588
100mm (4”) Universal -7340K100mm (4”) Lockfast -7350K
Type Weight Order Codeeach KEN-588
Universal 2.37kg -7200K
Type Weight Order Codeeach KEN-588
Lockfast 2.60kg -7210K
Accessories ContinuedRubber PlungerBuilds up pressure of waterto force obstruction clear.One piece rubber.
AccessoriesAvailable with two different type of joints:Universal: rods fitted with this type of jointshould only be rotated in a clockwisedirection.Lockfast: rods fitted with this type of jointcan be rotated in either direction and willremain secure in the most demandingconditions.
Double Worm ScrewPierces blockages such as paper or rags andthe obstruction is drawn back to clear thepipe.
Drain Testing DyeUsed to locate the directionof water flow in pipes, drainsetc. soluble in water.200g jars.
Drain Rod BagUsed for carrying up to 10x 36” rods.
Drain Rods
Use for cleaning and unblocking drains, pipes and sewers. A range ofaccessories are also available including drop scrapers, double wormscrews and plungers. Manufactured from polypropylene fitted withsolid brass joints securely fitted with brass rivets. Rods are strong,durable and rigid with the right amount of drain rod flexibility.
Available with two different types ofjoint; Universal: rods fitted with this type ofjoint should only be rotated in aclockwise direction.
Lockfast: rods fitted with this type ofjoint can be rotated in either directionand will remain secure in the mostdemanding conditions.
Drain Rod SetsUse for cleaning and unblocking drains, pipes and sewers. Manufactured from polypropylene fitted with solid brass joints securely fitted with brass rivets. Rods are strong, durable and rigid with the right amount of drain rod flexibility. Contents: 10x 20 x 900mm rods,1x 100mm double worm screw,1x 100mm plunger,1x 100mm drop scraper,Also supplied with two rod ties.
13PIECES
Pipe UnblockerThis pipe unblocker is easy to use and comes with a corrosion-resistant body. Its 4.6m coil length makes it ideal for unblocking domestic waste/drainpipes.
Description Order CodeKEN-588
Air Drain Test Kit -7600K
Air Drain Test KitUsed for testing for leaks in pipes of up to 4” water gauge.Contents: 4” ‘U’ gauge, 9’ length of tubing, hand bellows, ‘Y’ piece, 1/2” and 1” test nipple cap.
Pipe Size Capacity Min/Max BSP Order CodeMetric Inch Operating Range Outlet KEN-588100 4” 94-110mm 1/2” -7500K150 6” 94-110mm 1/2” -7510K200 8” 94-110mm 1” -7520K225 9” 94-110mm 1” -7530K300 12” 94-110mm 1” -7540K
Drain Test BungsUsed to pressure test or temporarily seal the end of an open pipewhich is newly laid or decommissioned, preventing the ingress ofwater, gasses, rodents.
Description Order CodeKEN-588
Pipe Cleaner 4.6m -6700K
Size Type Order CodeKEN-588
100mm (4”) Universal -7300K100mm (4”) Lockfast -7310K150mm (6”) Universal -7420K150mm (6”) Lockfast -7430K
GROUP
588 PIPE CUTTERS/BENDERS
Page530
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Multibender Pipe BenderPrecision bending up to 180°. Bends tubewithout distortion. Formers and guides willaccept 12, 15 and 22mm O/D tube. For use in the plumbing, heating, refrigerationand air conditioning industries. Spare formersand guides also available (see table below).
Tube Weight Order CodeCapacity each KEN-588
12, 15 & 22mm 4.10kg -6200K
Tube Weight Order CodeCapacity each KEN-588
12/15mm Former Only 172g -6810K12/22mm Former Only 321g -6820K
12mm Guide Only 123g -6920K15mm Guide Only 104g -6940K22mm Guide Only 287g -6960K
Capacity Weight Order Code(mm) each KEN-588
3, 4 & 6 150g -6080K
3-in-1 Mini Bender For bending 6, 8 and 10mm diameter copper and aluminium tubesup to 90°. Calibrated for left hand, right hand or offset ends in copper, brass, aluminium or steel. With a graduated scale for partial bending. Ribbed die-cast aluminium construction for lightness and strength.
Capacity Angle Weight Order Code(mm) Range each KEN-588
6, 8 & 10 0 - 90° 430g -6100K
Capacity Weight Order Codeeach KEN-588
4.75-10mm 565g -6300K
4 in 1 Micro Pipe Bender High tensile steel with riveted carbon steel. PVC grips. Carbon steel guides. Quick change aluminium formers. Bends copper and steel pipes. For pipe sizes 4.75, 6, 8 and 10mm.
3mm 4mm 6mm
6mm 8mm
4.75mm
10mm
6mm 8mm 10mm
12mm15mm22mm
3-in-1 Bender For bending 3, 4 and 6mm diameter copper and aluminium tubes up to 90°. With a graduatedscale for partial bending. Ribbeddie-cast aluminium constructionfor lightness and strength.Length: 140mm.
Accessories
Capacity Weight Order Code(mm) each KEN-5883 - 22 140g -5450K
Spare Cutter 5g -5800K
For Aluminium, Brass, Copper & Steel
Capacity Weight Order Code(mm) each KEN-5885 - 64 625g -5550K
Spare Cutter 5g -5690K
For Aluminium, Brass, Copper & SteelFor Stainless SteelCapacity Weight Order Code
(mm) each KEN-5883 - 22 140g -5700K
Spare Cutter 5g -5790K
For Stainless Steel
-5550K
4 rollers forstraighter cuts
on largerdiameters
-5500K -5720K
Quick releasemechanism
Internal pipedeburrer
External pipedeburrer in
handle
Capacity Weight Order Code(mm) each KEN-5883 - 28 270g -5490K
Capacity Weight Order Code(mm) each KEN-5883 - 30 195g -5500K
Spare Cutter 5g -5590K
Capacity Weight Order Code(mm) each KEN-5883 - 32 310g -5720K
Spare Cutter 5g -5790K
For Aluminium, Brass, Copper & Steel
Midget PipeCutter
For use on copper, brass, aluminium and thin wall conduit. Supplied with spare blade. Width: 25mm. Overall length:95mm.
-5690K
Replacement Cutting Wheels
Heavy Duty Pipe CuttersWith high strength cast bodies and single cutting wheels with four rollers for straighter cuts.Spring loaded release mechanism allows quick diameter adjustment and release. Suitable for aluminium, brass and copper tubes. Fitted with deburring blades.
Pipe CuttersWith high strength cast bodies and single cutting wheels with two rollers. Suitable for stainless steel, brass and copper tubes. All fitted with deburring blades.
Mini Pipe CutterCompact and robust construction ideal foruse in confined spaces. Grooved rollers allowclose-to-flare cuts. Large feed screw foraccurate cutting of aluminium, brass, copper and steel tubing.Length: 66mm.
PIPE CUTTERSGROUP
588
Page531
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Capacity Weight Order Code(mm) each KEN-588
3-40 (1/8”-15/8”) 250g -5900K
Pipe Deburrer
For internal and external edges.
Capacity Weight Order Codeeach KEN-588
15mm 186g -4800K22mm 192g -4820K
Spare Cutter 5g -4840K
Rubber Hose Cutter6 - 37mm cutting capacity. Spring opening. Lightweight moulded polypropylene body. Stainless steelblade. Guillotine action ensures a clean cut every time.Handle retaining hook for compact storage and bladesafety. Reversible blade. Not suitable for cutting metal.
Plastic Pipe Cutter - Mini Hose TypeManufactured from tough hardwearing ABS plastic. Spring loaded with a heat-treated steel blade.
Plastic Pipe CuttersStainless steel blade. Diecast alloy body. Extra wide lower jaws foreasy production of 90° cuts. Guillotine action ensures a clean cutevery time. Handle retaining loop for compact storage and bladesafety. Replaceable blade. Not suitable for cutting metal.
-5840K
-5844K
Automotive Chain Pipe CutterCuts thin wall pipe (stainless steel, copper, PVC etc.) up to 2.6mmthickness. The grip action eliminates hand gripping effort to ensure perfect tracking. Can be used for efficient cutting of exhaustpipes.
Capacity Overall Weight Order CodeLength each KEN-588
20 - 115mm 250mm 800g -5120K
CapacityRatchet Order Codestages KEN-588
6 - 36mm 4 -5840KSpare blade - Stainless Steel -5880K
12 - 42mm 7 -5842KSpare blade - Stainless Steel -5882K
25 - 63mm 5 -5844KSpare blade - Carbon Steel -5870K
Spare blade - Stainless Steel -5884K
Capacity Weight Order Code(mm) each KEN-5886 - 37 270g -5000K
-5842K
Capacity Weight Order Codeeach KEN-588
12.7mm 35g -5400K
Capacity Overall Weight Order CodeLength each KEN-588
15 - 75mm 250mm 800g -5100K
Industrial Chain Pipe CutterCuts wall pipe (welded and seamless) up to 6mm thick. The grip action eliminates hand gripping effort to ensure perfecttracking.
Automatic Pipe CuttersThese robust pipe cutters will cut copper, brass, aluminium, PVC and thin-wall conduit. They automatically tighten and cut when turned around the pipe. The compact design makes them ideal for working in confined spaces.
GROUP
588 PIPE FLARING TOOLS
Page532
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Pressure Testing Pump - 860psiThis robust piece of equipment has a 10ltr powdercoated tank and comes with a 1.5m 1/2” reinforced hoseand a pressure gauge graduated in Bar and PSI.
Product Tank Test Capacity Hose Weight Order CodeNumber Cap. Bar Psi Con each KEN-588PTP060 10ltr 60 860 1/2 BSP 9kg -8700K
Description Order CodeKEN-567
Gauge 60 Bar -9000KHose 60 Bar -9020K
Seal Kit 60 Bar -9040K
Replacement Parts for Pressure Testing Pump
10LTR
HEAVYDUTY
Double Flaring Tool & Pipe Cutting Set
Flaring tool for 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” and 5/8” steel, aluminiumand copper pipes. Cutter for 1/8” to 11/4” outside diameter pipe.Robust moulded case.
Double Flaring Tool SetManufactured to double flare soft steel, aluminium and copper tubingup to .040” wall thickness producing SAE 45° flares. Heat treatedalloy steel swivel is precision ground and chromed to reduce friction.Heat treated drop forged yoke. Each adaptor is clearly stamped withthe size for easy identification. Bright lustre plate finish withcontrasting black oxide. Will also produce a single flare.Sizes: 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, and 5/8”.
Capacity Weight Order Codeeach KEN-588
3/16” - 5/8” 1.03kg -9550K
Capacity Weight Order Codeeach KEN-588
3/16” - 5/8” 1.5kg -9570K
Tube Cutting & Bending SetContains flaring press, 45° spreader, 30mm capacitytube cutter, tube springs 14, 18, 16 and 20mm dia. Robust moulded case.
Folding Double Flaring Tool SetSuitable for use on copper pipe. Compact folding design. Robust moulded case. Single 45° flares: 3/16” to 5/8”. Double flares: 3/16” to 1/2”. Cutter: 1/8” to 11/4”. Deburrer: 1/8” to 11/8” internal and external.
Capacity Weight Order Code Offereach KEN-588
3/16” - 5/8” 2.5kg -9620K
Capacity Weight Order Codeeach KEN-588
3/16” - 5/8” 2.3kg -9600K
PIPE THREADERS/VICESGROUP
588
Page533
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Drop Head Threader Strong-arm ratchet threadingset complete with 1/2”, 3/4”and 1” quick change dies.Manufactured to thehighest quality withcomfortable 2-part handleto give greater leverage.Complete with toughmoulded carry case.
Description Weight Order Codeeach KEN-588
Head 1/2” BSPT 660g -8820K3/4” BSPT 584g -8830K1” BSPT 839g -8840K
Die 1/2” BSPT 69g -8920K3/4” BSPT 72g -8930K1” BSPT 132g -8940K
Ratchet 1.5kg -8980K
Capacity Weight Order Codeeach KEN-588
1/2” - 1” 4.5kg -8800K
Accessories
Pipe Vices
Used for repetitive tasks on pipework.The frame of the pipe vice is madefrom cast iron with jaws made fromhardened tool grade alloy steel with acorrosion resistant coating. The top jawof the pipe vice is held in position witha hook which automatically engageswhen the vice is closed.The stand isfitted with an integral tool tray, wideangled legs give greater stability andthe folding design provides easystorage and transportation.
Product Capacity Weight Order CodeNumber (mm) each KEN-588VP055 8-55 4.50kg -8020KVP085 10-85 6.70kg -8040KVP100 15-100 10.3kg -8060K
Product Capacity Weight Order CodeNumber (mm) each KEN-588VPS055 8-55 24.6kg -8220KVPS085 10-85 31.6kg -8240K
Product To Suit Weight Order CodeNumber (mm) each KEN-588TTS055 55 20.1kg -8520KTTS085 85 24.9kg -8540K
Pipe Vice Only
Pipe Vice & Stand
Stand Only
GROUP
445
GROUP
588 PIPE WRENCHES
Page534
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Pipe Wrenches
Jaws are serrated in the opposite direction to ensure a secure grip.Used mainly in the plumbing industry for gripping pipes and nuts.Cast iron frame, drop forged handles and jaws. All moving parts areheat treated. Used mainly in the plumbing industry for gripping pipesand nuts. Conform with BS 3594 : Part 2.Standard Duty - For most general purpose applications.
Length Capacity Weight Order Code(mm) (mm) per 6 KEN-588
205 (8”) 27 1.70kg -2080K255 (10”) 35 3.30kg -2100K305 (12”) 43 4.40kg -2120K355 (14”) 50 6.50kg -2140K455 (18”) 60 10.10kg -2180K600 (24”) 76 24.00kg -2240K900 (36”) 102 29.20kg -2360K
Length Capacity Weight Order Code(mm) (mm) per 6 KEN-588
200 (8”) 27 1.65kg -3680K255 (10”) 35 3.20kg -3700K305 (12”) 43 4.70kg -3720K355 (14”) 50 6.25kg -3740K455 (18”) 60 9.90kg -3780K600 (24”) 80 11.20kg -3840K900 (36”) 102 14.00kg -3860K
1200 (48”) 140 35.00kg -3880K
Wrench Standard Duty Heavy DutySize Order Code Order Code(mm) KEN-567 KEN-567
205 (8”) -4080K -4580K255 (10”) -4100K -4600K305 (12”) -4120K -4620K355 (14”) -4140K -4640K455 (18”) -4180K -4680K600 (24”) -4240K -4740K900 (36”) -4360K -4860K
Spare Jaw & NutFor standard and heavy duty pipe wrenches.
Length Weight Order Code(mm) each SEN-588
200 (8”) 0.40kg -5080K250 (10”) 0.67kg -5100K300 (12”) 1.00kg -5120K350 (14”) 1.30kg -5140K450 (18”) 2.00kg -5180K600 (24”) 3.50kg -5240K900 (36”) 5.90kg -5360K
1200 (48”) 16.00kg -5480K
CapacityWeight Order Codeeach SEN-588
25mm & 35mm 925g -9010K
Length Max. Jaw Weight Order Code(mm) Opening each KEN-588
225 (9”) 22mm 0.40kg -4290K300 (12”) 38mm 0.85kg -4320K405 (16”) 46mm 1.45kg -4360K530 (21”) 65mm 2.45kg -4410K
Swedish Pattern Pipe WrenchesNarrow design for confined areas, used for gripping pipeand nuts. Forged chrome vanadium heat treated steel.Knurled adjusting nut with guiding reinforcement onhandle. Conform to DIN 5234.90°° Type
‘S’ Type‘S’ shaped jaws grip at three points to ensure a maximum grip.
Length Max. Jaw Weight Order Code(mm) Opening each KEN-588
300 (12”) 38mm 0.76kg -4120K400 (16”) 46mm 1.40kg -4160K560 (22”) 65mm 2.50kg -4220K
Thumb Length Weight Order CodeAdjustment (mm) each KEN-588
175 (7”) 300g -2710KNo 225 (9”) 600g -2720K
300 (12”) 1000g -2730K175 (7”) 300g -2760K
Yes 225 (9”) 600g -2770K300 (12”) 1000g -2780K
Adjustable Pipe WrenchesAll purpose wrenches with precision milled and hardened teeth which grips the workpiece tighter the more pressure is applied.Pressed steel handles with high carbon steel profiled jaws.
Jaw Adjustment:(7”) 175mm:1.5 - 38mm (1/16” - 11/2”).(9”) 225mm:3.0 - 64mm (1/8” - 21/2”).(12”) 300mm:6.0 - 75mm (1/4” - 3”).
Speed Wrench Set
Contains two multi-purpose self-adjusting wrenches 200mm (8”) maximum capacity 25mm and 300mm (12”) maximum capacity 35mm. Can be used on pipes, nuts and bolts andwill also grip rounded nuts. Manufactured from fully chrome plated drop forged steel.
2PIECES
Heavy Duty - For more industrial applications.
Aluminium Pipe WrenchesLightweight aluminium alloy handles. As robust as heavy duty cast iron wrenches.
Length Capacity Weight Order Code(mm) (mm) per 6 KEN-588205 (8”) 27 2.60kg -3080K
255 (10”) 35 5.00kg -3100K305 (12”) 43 7.50kg -3120K355 (14”) 50 10.00kg -3140K455 (18”) 60 16.10kg -3180K600 (24”) 76 25.70kg -3240K900 (36”) 102 30.70kg -3360K
1200 (48”) 140 94.80kg -3480K
NEW
Heavy Duty Wrenches
Heavy duty pattern. Drop forged, single piece body.
Page535
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Aluminium Jaw with a Rubber Face
Aluminium Jaw with a Fibre Face
Magnetic Vice JawsSuitable for all steel and iron vices - engineers, fitters, machine. Quick and easy to fit and remove.Profiled Aluminium
Fibre Grips Fibre-faced aluminium vice jaws for use with copper,aluminium, brass and wooden workpieces to preventmarking of work surface.Supplied in pairs.
Heavy Duty Adjustable Twin Roller Stand
Ideal for supporting long andheavy duty pipe and timber.Adjustable feet. Lock-knob tosecurely lock-in height settings.Cast iron base with levelling padsfor stability. Adjustable height 29” (736mm) to 43” (1092mm), 13/8” (35mm) diameter x 6” (150mm)width with spring-loaded axle. Adjustable roller stands with doublerollers forming vee groove for addedstability allowing easy rotation and feedof up to 7” (180mm) diameter pipe ortimber.
ROLLER STANDS/VICE GRIPSGROUP
588/589
Heavy Duty Self Levelling Single Roller StandHRS020Heavy duty all steel welded construction. Unique levelling pads for uneven floors.Adequately supports up to 100kg.Legs fold flat for easy storage and transportation. Pre-assembled and ready to use. Height adjustment from 758 to 1197mm.Bearing roller: 51mm x 284mm.
Width Weight Order Code(mm) each KEN-58975 (3”) 125g -1300K
100 (4”) 165g -1400K125 (5”) 210g -1500K150 (6”) 250g -1600K
Width Weight Order Code(mm) each KEN-589
76 (3”) 165g -0300K90 (31/2”) 180g -0350K
100 (4”) 180g -0400K110 (41/2”) 230g -0420K115 (41/2”) 245g -0450K127 (5”) 245g -0500K133 (51/4”) 260g -0520K150 (6”) 280g -0600K
Width Weight Order Code(mm) each KEN-58975 (3”) 115g -2300K
100 (4”) 160g -2400K125 (5”) 195g -2500K150 (6”) 235g -2600K
Width Weight Order Code(mm) each KEN-58975 (3”) 120g -3300K
100 (4”) 160g -3400K125 (5”) 210g -3500K150 (6”) 250g -3600K
TypeWeight Order Codeeach KEN-588
Adjustable Twin 6.20kg -9030K
TypeWeight Order Codeeach KEN-588
Self Levelling 8kg -9020K
GROUP
445
GROUP
591 SHEARS & SNIPS
Page536
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
General Purpose Tinsnips
Manufactured from drop forged carbon steel withhardened and precision ground blades which can be re-sharpened.Standard TypeA traditional design, suitable for the general purpose cutting ofsheet metal in a wide range of materials such as copper,aluminium and mild steel.
Length Weight Order Code(mm) each SEN-591
250 (10”) 330g -1100K
Length Weight Order Code(mm) per 6 KEN-591
250 (10”) 3.95kg -1950K
Heavy Duty Right Hand Universal SnipThe cranked design allows for extra leverage to be safely applied.Ideal for the more demanding cutting application. PVC dipped handle.Straight BladeUniversal cutting.
Length Weight Order Code(mm) per 6 KEN-591
200 (8”) 1.90kg -1080K250 (10”) 2.90kg -1100K300 (12”) 4.00kg -1120K360 (14”) 5.10kg -1140K
General Purpose Straight Blade Tinsnips
A traditional drop forged carbon steel design withinduction hardened and ground blades. Suitable for the general purpose cutting of sheet metal in a wide range of materialssuch as copper, aluminum and mild steel.
Straight Cut
Straight Cut
Straight Cut
Length Weight Order Code(mm) per 6 KEN-591
280 (11”) 3.40kg -1670K
Left HandDesigned to cut straight or to the left leaving waste material to theright of the blade.
Cranked Blade Heavy Duty SnipsThe cranked design allows for extra leverage to be safely applied.Ideal for the more demanding cutting application. PVC dipped handle.Right HandDesigned to cut straight or to the right, leaving waste material to theleft of the blade.
Length Weight Order Code(mm) per 6 KEN-591
280 (11”) 3.40kg -1690K360 (14”) 5.60kg -1700K
Left Cut
Straight Cut
Multi-Purpose CuttersFor cutting cardboard, leather, rope, cord, wire, paper and many othermaterials. Precision ground and hardened stainless steel blades HRC50~54 with one serrated cutting edge to reduce slipping. Lightweightpolypropylene handles with spring loaded action with an easy reachthumb catch convenient for right and left hand users. Cutting length: 42mm (15/8”).
Type Length Weight Order Code(mm) each KEN-591
Straight 190 (71/2”) 180g -2340KOffset 185 (71/4”) 150g -3100K
Straight
Straight Cut
Offset
Curved Cutting
Jeweller’s SnipsShort bladed tinsnip giving precise control on intricateworkpieces, ideal for jewellers, silversmiths and model makers.Straight Cutting
Type Length Weight Order Code(mm) per 6 KEN-591
Straight 180 (7”) 1.30kg -1550KCurved 180 (7”) 1.30kg -1560K
Left Cut
Straight Cut
NEW
SHEARS & SNIPSGROUP
591
Page537
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Sheet Metal Nibbler
For cutting sheet materials without bending or distorting, metal up to 1.2mm (18gauge) and plastic up to 2mm (14 gauge). Positive spring loaded action enablesthe cutter to be used single handed. Replaceablemolybdenum front blade. Side jaws for wire cutting. Safety jaw lock. Overall length: 250mm.
Straight Cut
Straight CutCuts straight, left or right. Self-opening action for fast, effortlessfeed, with a built in convenient, protective safety latch.
Compound Action Aviation Snips
Drop forged chrome vanadium ground blades (54 - 58HRc). The double fulcrum compound action amplifies the pressure applied for easier cutting of up to 1.2mm cold rolled steelsheet. Spring loaded, self-opening action for fast, effortless feed and single-handed operation. Anti-slip guards for extra safety.Thumb lock ensures the jaws stay closed when not in use. For use on mild steel and other non-ferrous materials. Left Hand or Right Hand Cut Cut from tight curve to straight.
3 Piece Set Contents:1x pair 250mm (10”) right hand aviation snips 591-217,1x pair 250mm (10”) left hand aviation snips 591-216,1x pair 250mm (10”) straight aviation snips 591-218.
Number Weight Order Codeof Pieces each KEN-591
3 1.22kg -2240K
Offset Cut (Heavy Duty)The offset blades keep hands clear of metal. Spring-action for fast,effortless feed. Non-slip, textured grips and safety latch for superiorcontrol and a handy hang-up hole.
Type Length Weight Order Code(mm) per 6 KEN-591
Right Hand 250 (93/4”) 2.40kg -2150KLeft Hand 250 (93/4”) 2.40kg -2140K
Left Cut
Right Cut
Straight Cut
Left Cut
Right Cut
Left Cut
Right Cut
Straight Cut
3PIECES
Type Length Weight Order Code(mm) per 6 KEN-591
Right Hand 270 (101/2”) 2.40kg -2170KLeft Hand 270 (101/2”) 2.40kg -2160K
Length Weight Order Code(mm) per 6 KEN-591
270 (101/2”) 2.50kg -2180K
Length Weight Order Code(mm) each SEN-591
250 (10”) 505g -8090KReplacement Blade 25g -8095K
GROUP
592 BOLT & CABLE CUTTERS
Page538
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Clipper Cut Jaws Produce a straight edge on one end of theworkpiece for a flush fit. Ideal for low tensilematerials such as mild steel, single strandwire etc.
Replacement JawsCentre Cut Jaws To efficiently cut high tensilematerials by directing the force being applied into a small area. For use onnon-ferrous rods and bars, mild steel bolts etc.
To Suit Weight Order Code(mm) each KEN-567
To Suit Low Tensile Cutters300 (12”) 260g -2920K360 (14”) 380g -2940K460 (18”) 590g -2960K600 (24”) 850g -2980K760 (30”) 1100g -2990K900 (36”) 2300g -3000K
To Suit Medium Tensile Cutters900 (36”) 2300g -3440K1070 (42”) 3100g -3450K
To Suit High Tensile Cutters760 (30”) 1500g -3490K1070 (42”) 3100g -3510K
To Suit Weight Order Code(mm) each KEN-567
To Suit Low Tensile Cutters300 (12”) 280g -3120K900 (36”) 1800g -3360K
To Suit Medium Tensile Cutters300 (12”) 280g -3400K460 (18”) 490g -3410K600 (24”) 860g -3420K
To Suit High Tensile Cutters300 (12”) 280g -3460K460 (18”) 490g -3470K600 (24”) 860g -3480K
Cut Overall Cutting Capacity Weight Order CodeType Length 735N/mm2
each KEN-592(mm) (45 tons/in2)300 (12”) 4mm (5/32”) 0.75kg -3120K360 (14”) 6mm (1/4”) 0.95kg -3140K
Centre460 (18”) 7mm (9/32”) 1.50kg -3180K600 (24”) 8mm (5/16”) 2.40kg -3240K760 (30”) 13mm (1/2”) 5.60kg -3300K900 (36”) 16mm (5/8”) 5.75kg -3360K
CentreCut
CentreCut
ClipperCut
CentreCut
ClipperCut
Cut Overall Cutting Capacity Weight Order CodeType Length 735N/mm2 1200N/mm2 1570N/mm2
each KEN-592(mm) (45 tons/in2) (80 tons/in2) (100 tons/in2)300 (12”) 6mm (1/4”) 4mm (5/32”) 4mm (5/32”) 1.80kg -2120K
Clipper 460 (18”) 7mm (9/32”) 6mm (1/4”) 5.5mm (13/64”) 1.30kg -2180K600 (24”) 9mm (11/32”) 8mm (5/16”) 7mm (9/32”) 2.40kg -2240K760 (30”) 11mm (7/16”) 9mm (11/32”) 8mm (5/16”) 4.25kg -2300K
Centre 900 (36”) 13mm (1/2”) 10mm (3/8”) 9mm (11/32”) 6.10kg -2360K1070 (42”) 15mm (5/8”) 11mm (7/16”) 10mm (3/8”) 8.30kg -2420K
Medium Tensile Bolt Cutters Drop forged hardened chrome vanadium steel. Ideal for cutting both flat and round sectionsteels. Hardened carbon steel jaws. Tubular steel handles with cushion grip for maximum operator comfort. Conform to DIN 2076.
Cut Overall Cutting CapacityWeight Order Code
Type Length 735N/mm2 1200N/mm2each KEN-592(mm) (45 tons/in2) (80 tons/in2)
300 (12”) 6mm (1/4”) 4mm (5/32”) 1.75kg -1120KClipper 460 (18”) 7mm (9/32”) 6mm (1/4”) 1.25kg -1180K
600 (24”) 9mm (11/32”) 8mm (5/16”) 2.40kg -1240K760 (30”) 11mm (7/16”) 9mm (11/32”) 4.25kg -1300KCentre 900 (36”) 13mm (1/2”) 10mm (3/8”) 6.10kg -1360K
Low Tensile Bolt Cutters - Centre Cut
Drop forged hardened carbon steel suitable for round and flat sections. With adjustable arms.With cushion grips. 300mm model has cast handles - all other sizes have tubular handles for maximum strength combined with low weight. Conform to JIS B4643.
Mini Bolt CuttersMini Cutters - Clipper CutManufactured from forgedhardened steel, with springreturn, allowing singlehanded use. Compoundaction magnifies thepressure applied to thehandle. Ensures aconcentration of forcebetween the jaws.Non-slipmoulded plastic grip.Available with straight andbent jaws. For low tensilematerials. Clipper cut. Overall length: 200mm (8”)
Jaw Cutting CapacityOrder Code
Type 735N/mm2KEN-592(45 tons/in2)
Straight 3mm (1/8”) -0080KBent 3mm (1/8”) -0090K
High Tensile Bolt Cutters Drop forged hardened chrome vanadium steel. Ideal for cutting both flat and round section steels. Hardened carbon steel jaws. Tubular steel handles with cushion grip for maximum operator comfort. Conform to DIN 2076.
DRAWER CABINETSGROUP
593
Page539
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Small Parts Storage Cabinets
Manufactured from heavy gauge steel, painted finish withimpact resistant transparent polypropylene drawers, allowing contents to be viewed when the drawer is closed. The lip onthe rear of the drawer allows it to be opened fully without falling out. The cabinets can be stacked or mounted to the wall to maximise useof storage space.
Product Cabinet/ Height WidthDepthWeight Order CodeNumber Drawers (mm) (mm) (mm) each KEN-593
KCM008 Cabinet size 282 306 155 1.50kg -5100K8 Drawers @ 59 140 140
KCS025 Cabinet size 238 306 155 2.00kg -5120K25 Drawers @ 36.5 54 140
KCM016 Cabinet size 551 306 155 2.80kg -5200K16 Drawers @ 59 140 140
KCS060 Cabinet size 551 306 155 4.50kg -5220K60 Drawers @ 36.5 54 140Cabinet size 551 306 155
KCC046 30 Drawers @ 36.5 54 140 4.50kg -5300K4 Drawers @ 59 140 1402 Drawers @ 59 280 140Cabinet size 551 306 155
KCC048 45 Drawers @ 36.5 54 140 4.20kg -5320K2 Drawers @ 59 140 1401 Drawers @ 59 280 140
Drawers to Suit
Drawer Weight Order CodeSize each KEN-593
Small 50 x 29mm 19g -9700KMedium/Large 50 x 133mm 85g -9720K
Drawer Height Width Depth Weight Order CodeSize (mm) (mm) (mm) each KEN-593
Small 36.5 54 140 24g -9600KMedium 59 140 140 65g -9620KLarge 59 280 140 154g -9640K
Dividers to Suit
Small Parts Storage Cabinets
Manufactured from heavy gauge steel, painted finish withtransparent plastic drawers, allows contents to be viewed when the drawer is closed. The lip on the rear of the drawer allows itto be opened fully without falling out. The cabinets can be stacked ormounted to the wall to maximise use of storage space.
Product Cabinet/ Height Width Depth Weight Order CodeNumber Drawers (mm) (mm) (mm) each SEN-593
SCM008 Cabinet size 282 306 155 1.50kg -5100K8 Drawers @ 59 140 140
SCS025 Cabinet size 238 306 155 2.00kg -5120K25 Drawers @ 36.5 54 140
SCM016 Cabinet size 551 306 155 2.80kg -5200K16 Drawers @ 59 140 140
SCS060 Cabinet size 551 306 155 4.50kg -5220K60 Drawers @ 36.5 54 140Cabinet size 551 306 155
SCC046 30 Drawers @ 36.5 54 140 4.50kg -5300K4 Drawers @ 59 140 1402 Drawers @ 59 280 140Cabinet size 551 306 155
SCC048 45 Drawers @ 36.5 54 140 4.20kg -5320K2 Drawers @ 59 140 1401 Drawers @ 59 280 140
Drawers to Suit
Drawer Weight Order CodeSize each SEN-593
Small 50 x 29mm 21g -9700KMedium/Large 50 x 133mm 104g -9720K
Drawer Height Width Depth Weight Order CodeSize (mm) (mm) (mm) each SEN-593
Small 36.5 54 140 13g -9600KMedium 59 140 140 80g -9620KLarge 59 280 140 192g -9640K
Dividers to Suit
IMPACTRESISTANTDRAWERS
-5100K -5120K
-5200K
-5220K
-5300K-5320K
-5100K -5120K
-5200K
-5220K
-5300K-5320K
NEW
GROUP
593 TOOL POUCHES
Page540
HAN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Manufactured from leather with a fully riveteddouble stitched construction. Chrome leather, five pockets and one loop. Belt not included.
Colour Size Weight Order Code(mm) each KEN-593
Brown 1170 x 50 160g -3040KBlack 1200 x 50 120g -3060K
Polyester & Nylon BeltsAdjustable webbing. Riveted foradded strength and support.
Size Weight Order Code(mm) each KEN-593
370 x 220 290g -3240K
Size Weight Order Code(mm) each KEN-593
1170 x 50 260g -3000K1170 x 40 210g -3020K
Size Weight Order Code(mm) each KEN-593
250 x 280 360g -3460K
Size Weight Order Code(mm) each KEN-593
220 x 210 300g -3470K
Size Weight Order Code(mm) each KEN-593
1170 x 50 309g -3080K
Size Weight Order Code(mm) each KEN-593
210 x 250 340g -3450K
Leather Belts -Heavy Duty
Heavy duty natural split leather with heavy buckle and retainingloop.
Heavy duty oil tan belt with brass buckle andrivets for use with Kennedy tool pouches.
Nail Pouches - LeatherLeather, two pockets and one loop. Double stitched seams with riveted cornersfor extra strength. Webbed nylon belt.
Leather, made with five pockets and oneloop. Belt not included.
Leather, made with five pockets, two loops,webbing belt and tape holder.
Tools NotIncluded
Tools NotIncluded
Size Weight Order Code(mm) each KEN-593
360 x 250 370g -3340K
Leather, two pockets, one loop, deep pocket.Double stitched seams with riveted cornersfor extra strength.
Tools NotIncluded
Size Weight Order Code(mm) each KEN-593
280 x 270 310g -3600K
Combination PouchesLeather, made with one pocket, two loopsand nail pouch. Belt not included.
Tools NotIncluded
TOOL POUCHESGROUP
593H
AN
D T
OO
LS
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2011
Size Weight Order Code(mm) each KEN-593
300 x 230 695g -3280K
Size Weight Order Code(mm) each KEN-593
280 x 300 1.2kg -3260K
Tool Pouch - Large4 Pocket 2 Loop Tool Pouch - Oil TanLarge tool pouch with four pockets and twotool loops. Fully brass riveted construction.Manufactured from oil tanned leather.
Nail & Tool Pouch - Large3 Pocket 2 Loop Nail & Tool Pouch - Oil TanLarge nail and tool pouch with three pocketsand two tool loops. Fully brass rivetedconstruction. Manufactured from oil tannedleather.
Combination Tool PouchDouble Nail Bag & Combination Tool Pouch Heavy duty polyester allowsexceptional resistance to puncturesor tears. Heavily stitched webbing on belt loop and edges, and double cappedriveted for added strength and support.
Size Order Code(mm) KEN-593
270 x 200 x 50 (x2)130 x 120 x 80 (x2) -3400K140 x 100 x 50 (x1)
Nail Bag - Nylon
Heavy duty polyester allows exceptionalresistance to punctures or tears. Heavilystitched webbing belt complete with heavyduty double capped riveted clasp for addedstrength and support.
Size Weight Order Code(mm) each KEN-593
525 x 290 0.31kg -3540K
Size Weight Order Code(mm) each KEN-593
550 x 220 330g -3500K
Size Weight Order Code(mm) each KEN-593
550 x 220 670g -3510K
Tools NotIncluded
Leather, made with eight deep pockets, two nail pouches, two loops, webbing beltand tape holder.
Tools NotIncluded
Combination Tool Pouches
Leather, made with ten pockets, two loops,webbing belt and tape holder.
Size Weight Order Code(mm) each KEN-593
200 x 260 410g -3770K
Size Weight Order Code(mm) each KEN-593
290 x 200 300g -3640K
Electricians’ ToolPouch Manufactured from naturalsplit leather, four pockets,seven tool loops, T-bar andchain, spring clip, tapepocket. Fully rivetedconstruction. Belt not included.
Tools NotIncluded
Tool PouchesManufactured from leather. Fully riveted doublestitchedconstruction.Chromeleather, twopockets andfive loops.Belt notincluded.
Double ToolPouch
10 Pocket 2 Loop Double Tool Pouch - Oil TanManufactured from butt split leather. Fully riveted construction. 10 pockets with T-bar chain and spring clips. Belt supplied separately.
Page541
Size Weight Order Code(mm) each KEN-593
300 x 230 965g -3270K