victaulic.com
VICTAULIC® LOCATIONS IN CANADA
RICHMOND HILL123 Newkirk RoadRichmond Hill, ON L4C 3G5905 884 7444905 884 9774 (fax)
victaulic.com
VANCOUVER8129 River WayDelta, BC V4G 1L2604 940 3301604 940 3360 (fax)
EDMONTON17329 111th Avenue NWEdmonton, AB T5S 0J5780 452 0680780 452 2430 (fax)
SUDBURY1070 Elisabella StreetSudbury, ON P3A 5K2705 560 9595705 560 9490 (fax)
MONTREAL5895 rue KieranSaint Laurent, QC H4S 0A3514 337 3500514 337 1949 (fax)
GENERAL PRICE LIST
PL2016-GENERAL-C 9218 REV B 03/2016VICTAULIC AND ALL OTHER VICTAULIC MARKS ARE THE TRADEMARKS OR REGISTERED TRADEMARKS OF VICTAULIC COMPANY, AND/OR ITS AFFILIATED ENTITIES, IN THE U.S. AND/OR OTHER COUNTRIES. © 2016 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
GENERAL PRICE LIST
PL2016-GENERAL-C Effective February 1, 2016
GENERAL PRICE LISTEffective February 1, 2016
Table of contents
Gasket Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VSECTION 1 – Couplings and Fittings Style 107H QuickVic™ Rigid Coupling for Steel . . . . . . . . . . . 1-2Style 107N QuickVic™ Rigid Coupling . . . . . . . . . . . . . . . . . . 1-2Style 07 Zero-Flex™ Rigid Coupling . . . . . . . . . . . . . . . . . . . 1-3Style 07 Zero-Flex™ Rigid Coupling with
Silicone Grade “L” Gasket or Fluoroelastomer Grade “O” Gasket . . . . . . . . . . . . . . . . . 1-3
Style W07 AGS Rigid Coupling with Grade “E” Flush-Seal™ Gasket . . . . . . . . . . . . . . . . . . . 1-4
Style W07 AGS Rigid Coupling with Grade “T” or Silicone Gasket. . . . . . . . . . . . . . . . . . . . . 1-5
Style 177 QuickVic™ Flexible Coupling for Steel . . . . . . . . . . 1-5Style 177N QuickVic™ Flexible Coupling for Steel . . . . . . . . . 1-6Style 77 Standard Flexible Coupling . . . . . . . . . . . . . . . . . . . .1-7Style 77 Standard Flexible Coupling with
Silicone Grade “L” Gasket or Fluoroelastomer Grade “O” Gasket . . . . . . . . . . . . . . . . 1-8
Style W77 AGS Flexible Coupling with Grade “E” Flush-Seal™ Gasket . . . . . . . . . . . . . . . . . . . 1-9
Style W77 AGS Flexible Coupling with Grade “T” or “L” Flush-Seal™ Gasket . . . . . . . . . . . . . .1-10
Style 75 Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11Style 75 Flexible Coupling with Silicone Gasket . . . . . . . . . . .1-11Style 750 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . .1-12Style 741 Vic-Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . .1-12Style W741 AGS Vic-Flange Adapter . . . . . . . . . . . . . . . . . . .1-13Style 743 Vic-Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . .1-13Flange Washers – Styles 741, W741, 743 . . . . . . . . . . . . . . .1-14Style 72 Outlet Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-15Style 791 and 792 Vic-Boltless Coupling . . . . . . . . . . . . . . . .1-16Style 791 Locking Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-16Style 78 Snap-Joint™ Coupling . . . . . . . . . . . . . . . . . . . . . . .1-17Style HP-70 Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . . .1-17Style HP-70ES Coupling with “ES” Gasket . . . . . . . . . . . . . . .1-18Style 307 Transition Coupling . . . . . . . . . . . . . . . . . . . . . . . .1-18Style 171 Composite Flexible Coupling . . . . . . . . . . . . . . . . .1-19Style 808 Coupling for Double Groove Pipe . . . . . . . . . . . . . .1-19Style 870 Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-19Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20Victaulic Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23Flange Gaskets – Styles 741, W741, 743 . . . . . . . . . . . . . . . 1-23Swing Handle Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . .1-24Installation Ready™ Bolts and Nuts . . . . . . . . . . . . . . . . . . .1-24Go-No-Go Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-24Elbows –
No. 10 – 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25 No. 11 - 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25No. W10 – 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25No. W11 – 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25No. 12 – 22Z\x° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26No. 13 – 11Z\v° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26
No. W12 – AGS 22Z\x° . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26No. W13 – AGS 11Z\v° . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26No. 100 and No. 110 1Z\x D Long Radius Elbows . . . . . . .1-27No. W100 and W110 1Z\x D AGS Long Radius Elbow . . . . .1-27No. 890 and 890H – Long Radius 90° . . . . . . . . . . . . . 1-28No. 811 and 811H – 45° . . . . . . . . . . . . . . . . . . . . . . . . 1-28No. R-10G and No. R-10F Reducing Base
Support Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-28No. 10-DR Drain Elbow . . . . . . . . . . . . . . . . . . . . . . . . . 1-29
No. 20 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-29No. 29M Tee with Threaded Branch . . . . . . . . . . . . . . . . . . 1-29No. W20 AGS Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-30No. 820 and No. 820H Tee . . . . . . . . . . . . . . . . . . . . . . . . 1-30No. 35 Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-31No. 33 True Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-31No. W35 AGS Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-31No. W33 AGS True Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-31No(s). 40, 42, and 43 Adapter Nipples . . . . . . . . . . . . . . . . 1-32No(s). W42, W43 and W49 AGS Adapter Nipples . . . . . . . . 1-32No. 80 Female Threaded Adapter . . . . . . . . . . . . . . . . . . . . 1-33No(s). 18 and 19 Adapter Elbows . . . . . . . . . . . . . . . . . . . . 1-33No. 25 Grooved Reducing Tee . . . . . . . . . . . . . . . . . . . . . . 1-34No. W25 AGS Grooved Reducing Tee . . . . . . . . . . . . . . . . . 1-36No. 825 and No. 825H Reducing Tee . . . . . . . . . . . . . . . . . 1-39No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . 1-40No. 50 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . 1-42No. 51 Eccentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . 1-42No. W50 AGS Concentric Reducer . . . . . . . . . . . . . . . . . . . 1-44No. W51 AGS Eccentric Reducer . . . . . . . . . . . . . . . . . . . . 1-44No. 850 and No. 850H Concentric Reducer . . . . . . . . . . . . 1-47No. 851 and No. 851H Eccentric Reducer . . . . . . . . . . . . . 1-47No.(s) 53, 54 and 55 Swaged Nipples . . . . . . . . . . . . . . . . . 1-48No. 52 Reducer Threaded Small End . . . . . . . . . . . . . . . . . 1-49No. 30 Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-50No. W30 AGS Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-50No. 60 Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-51No. W60 AGS Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-51No. 860 and No. 860H Cap . . . . . . . . . . . . . . . . . . . . . . . . 1-52No. 61 Bull Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-52No. 30R Reducing Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . 1-53No. W30R AGS Reducing Lateral . . . . . . . . . . . . . . . . . . . . 1-54No. 32 Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-55No. 36B VicBlast™ Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . 1-55No. 48 Hose Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-56No(s). 45 and 46 Flanged Adapter Nipples . . . . . . . . . . . . . 1-56No. W45R AGS Flanged Adapter Nipple . . . . . . . . . . . . . . . 1-57No(s). 845F and 846F Flat Face Flange Adapter Nipple . . . 1-57No(s). 845R and 846R Raised Face Flange Adapter Nipple 1-573D Cast Bends for Abrasive Services. . . . . . . . . . . . . . . . . . 1-58Long Radius Bends – 3D . . . . . . . . . . . . . . . . . . . . . . . . . . 1-59Long Radius Bends – 5D . . . . . . . . . . . . . . . . . . . . . . . . . . 1-60Long Radius Bends – 6D . . . . . . . . . . . . . . . . . . . . . . . . . . 1-61
I
Table of ContentsTA
BLE
OF C
ON
TENTS
VICTAULIC.COM PL2016-GENERAL-C
XL Fittings and CouplingsStyle XL100/XL77/XL79 90° – 1Z\xD
Elbows and Couplings . . . . . . . . . . . . . . . . . . . . . . . 1-62Style XL110/XL77/XL79 45° – 1Z\xD
Elbows and Couplings . . . . . . . . . . . . . . . . . . . . . . . 1-62Style XL100/XL77/XL79 90° – 3D
Elbows and Couplings . . . . . . . . . . . . . . . . . . . . . . . 1-62Style XL110/XL77/XL79 45° – 3D
Elbows and Couplings . . . . . . . . . . . . . . . . . . . . . . . 1-63Style XL100/XL110 90° and 45° 1Z\xD
Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-63Style XL100/XL110 90° and 45° 3D
Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-63Style XLXL77/XL79 Couplings . . . . . . . . . . . . . . . . . . . . 1-64
No. 62 90° Extra Heavy “ES” EndSeal Elbow . . . . . . . . . . . 1-64No. 63 45° Extra Heavy “ES” EndSeal Elbow . . . . . . . . . . . 1-64No. 64 Extra Heavy “ES” EndSeal Tee . . . . . . . . . . . . . . . . 1-64SECTION 2 – Cut Grooved Fittings for Rubber No. 12 – 22Z\x° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2No. 13 – 11Z\v° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2No. 20 Tee, No. 29M Tee with Threaded Branch . . . . . . . . . 2-2No. 35 Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3No. 33 True Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3No. 25 Grooved Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . 2-4No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . . 2-6No. 30 Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7No. 30R Reducing Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7No. 32 Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8No(s). 45 and 46 Flanged Adapter Nipples . . . . . . . . . . . . . . 2-8SECTION 3 – Hole Cut ProductsStyles 920/920N Female Threaded Mechanical-T Outlet . . . . 3-2Styles 920/920N Grooved Mechanical-T Outlet . . . . . . . . . . 3-3Styles 920/920N Mechanical-T Cross . . . . . . . . . . . . . . . . . 3-4Style 923 Strapless Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7Style 924 Thermometer Outlet . . . . . . . . . . . . . . . . . . . . . . . 3-7Style 931 Vic-Tap II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8SECTION 4 – Valves and SpecialtiesSeries 761 Vic-300 MasterSeal™ Butterfly Valve . . . . . . . . . . 4-2Series W761 Vic-300 AGS (14 – 24”)
300 psi Butterfly Valve . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5Series W709 AGS Butterfly Valve . . . . . . . . . . . . . . . . . . . . . 4-6Series 706 (14 – 24”) 300-psi Butterfly Valve . . . . . . . . . . . . 4-6Series 700 Butterfly Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7Series 7B2 Butterfly Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7Series 726 Grooved End Ball Valve . . . . . . . . . . . . . . . . . . . . 4-8Series 721 Grooved End Ball Valve . . . . . . . . . . . . . . . . . . . . 4-8Series 727 Ball Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9Series 722 Threaded Brass Ball Valve . . . . . . . . . . . . . . . . . . 4-9Series 712 Swing Check Valve . . . . . . . . . . . . . . . . . . . . . . . .4-10Series 713 High Pressure Check Valve . . . . . . . . . . . . . . . . .4-10Series 377 Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11Series 716H/716 Vic-Check Valve . . . . . . . . . . . . . . . . . . . . .4-11Series W715 AGS Vic-Check Valve . . . . . . . . . . . . . . . . . . . 4-12
Series 779 Venturi Check Valve . . . . . . . . . . . . . . . . . . . . . . 4-12Triple Service BFV/Check Valve Combination . . . . . . . . . . . . 4-13AGS Triple Service BFV/Check Valve Combination . . . . . . . . .4-14Triple Service BFV/Check Valve Combination with
Venturi Flow Measurement Ports . . . . . . . . . . . . . . . . . .4-15Series 725 Diverter Valve . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16Series 731-D Suction Diffuser . . . . . . . . . . . . . . . . . . . . . . . .4-17Series W731-D AGS Suction Diffuser . . . . . . . . . . . . . . . . . . .4-17Series 730 Vic-Strainer Tee-Type Strainer . . . . . . . . . . . . . . 4-18Series W730 AGS Vic-Strainer Tee Type Strainer . . . . . . . . . 4-18Series 732 Vic-Strainer Wye Type Strainer . . . . . . . . . . . . . . 4-19Series W732 Vic-Strainer Wye Type Strainer . . . . . . . . . . . . 4-19Style 150 Mover Expansion Joint . . . . . . . . . . . . . . . . . . . . . 4-19Style 156 Assembly Header . . . . . . . . . . . . . . . . . . . . . . . . 4-20SECTION 5 – Hydronic Balancing Products Manual Balancing Valves
TA Series 786 STAS – Solder End . . . . . . . . . . . . . . . . . . 5-2TA Series 787 STAD – NPT (Fem.) End – (300 psi) . . . . . 5-2Series 78K STADK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2TA Series 788 STAF – Flanged End . . . . . . . . . . . . . . . . . 5-3TA Series 789 STAG – Grooved End . . . . . . . . . . . . . . . . . 5-3TA Series 786 and 787 Insulation Kits . . . . . . . . . . . . . . . 5-3TA Series 788 and 789 Insulation Kits . . . . . . . . . . . . . . . 5-4TA Series 786 Drain Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Automatic Balancing ValvesSeries 76T – Female x Female Threaded . . . . . . . . . . . . . 5-5Series 76B – Female x Female Threaded with
a Ball Valve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5Series 76K – Male x Female Threaded . . . . . . . . . . . . . . . 5-5Series 76V – Male x Female Threaded with
a Ball Valve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6Series 76G – Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6Automatic Balancing Valve Cartridges . . . . . . . . . . . . . . . 5-7
Balancing Control ValvesTA Series TC – On/Off Control . . . . . . . . . . . . . . . . . . . . . 5-8TA Series TCM – Modulating Control . . . . . . . . . . . . . . . . 5-8TA Series TCP – Pressure Independent . . . . . . . . . . . . . . 5-9TA Series 7CP Compact Pressure Independent
Balancing and Control Valve . . . . . . . . . . . . . . . . . . .5-10TA Series 7CP Accessories . . . . . . . . . . . . . . . . . . . . . . 5-12TA Series 7CT Control and Balancing Valve . . . . . . . . . . 5-13TA Series 7CT Accessories . . . . . . . . . . . . . . . . . . . . . . .5-14Balancing Control Valve Actuators . . . . . . . . . . . . . . . . . .5-14Series 76X ICSS – Low Lead Balancing Valve . . . . . . . . . 5-15
Combined Balancing and Control ValvesTA Series 7FC (FUS1ON C) . . . . . . . . . . . . . . . . . . . . . . .5-16TA Series 7FP (FUS1ON P) . . . . . . . . . . . . . . . . . . . . . . 5-18
KOIL-KIT™ Coil Packages . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20Series 793 Differential Pressure Controller – Threaded . . . . 5-21TA Series 794 Differential Pressure Controller – Flanged . . . 5-21TA Series 793 Insulation Kits . . . . . . . . . . . . . . . . . . . . . . . . 5-21TA Differential Pressure Controller Accessories . . . . . . . . . . 5-22
VICTAULIC.COM PL2016-GENERAL-CII
Table of ContentsTA
BLE
OF
CO
NTE
NTS
Series 736 TA Link Differential Pressure Sensor . . . . . . . . . 5-23Universal Gauge Meter Conversion Kit . . . . . . . . . . . . . . . . . 5-23TA Series 734 SCOPEScope Balancing Instrument . . . . . . . 5-24SECTION 6 – Plain End Couplings and Fittings Style 99 Roust-A-Bout Coupling . . . . . . . . . . . . . . . . . . . . . . 6-2Gaskets for Style 99 Couplings . . . . . . . . . . . . . . . . . . . . . . . 6-2Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . 6-3No(s). 40-P, 42-P and 43-P Adapter Nipples . . . . . . . . . . . . . 6-3Plain End Fittings –
No. 10-P – 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4No. 11-P – 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4No. 20-P – Tee, No. 61-P Bull Plug . . . . . . . . . . . . . . . . . 6-4No. 33-P – Wye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5No. 30-P – Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5No. 35-P – Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5No. 53-P – Swaged Nipples . . . . . . . . . . . . . . . . . . . . . . . 6-6No. 25-P – Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . 6-7
SECTION 7 – HDPE Products Style 995N HDPE Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2Style 905 Coupling for HDPE Pipe . . . . . . . . . . . . . . . . . . . . 7-3Style 907 Coupling for HDPE to Steel Pipe . . . . . . . . . . . . . . 7-3Style 908 Coupling for Grooved HDPE Pipe . . . . . . . . . . . . . . 7-4Style 997 HDPE-to-Steel Transition Coupling . . . . . . . . . . . . . 7-4HDPE Plain End Fittings
No. H10 – 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5No. H11 – 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5No. H20 – Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5No. H50 – Concentric Reducer . . . . . . . . . . . . . . . . . . . . 7-5
Style 994 HDPE Flange Adapter . . . . . . . . . . . . . . . . . . . . . . 7-6Model CG3100/3300/3500 Refuse-to-Fuse™
Cut Grooving Tool for HDPE Pipe . . . . . . . . . . . . . . . . . . 7-6SECTION 8 – Copper Connection Products Style 607 QuickVic™ Rigid Coupling for Copper . . . . . . . . . . 8-2No. 670 Installation-Ready 90° Elbow . . . . . . . . . . . . . . . . . . 8-2No. 610 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2No. 611 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2No. 620 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3No. 660 Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3Reducers –
No. 650 Concentric Reducer Groove x Groove . . . . . . . . . 8-3No. 652 Concentric Reducer Groove x Cup . . . . . . . . . . . 8-3No. 625 Reducing Tee Groove x Groove . . . . . . . . . . . . . . 8-4No. 626 Reducing Tee Groove x Cup . . . . . . . . . . . . . . . . 8-4
Style 641 Vic-Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 8-5Style 622 Copper Mechanical-T Bolted Branch Outlet . . . . . . 8-6Style 622 Copper Mechanical-T Cross . . . . . . . . . . . . . . . . . . 8-6Series 608N Copper Connection Butterfly Valve . . . . . . . . . . 8-7Carbon Steel or Stainless Steel (IPS) to Copper (CTS) Dielectric
Transition FittingsStyle 647-GT – Grooved x Threaded . . . . . . . . . . . . . . . . 8-7Style 647-TT – Threaded x Threaded . . . . . . . . . . . . . . . . 8-7Style 647-GG Grooved x Grooved . . . . . . . . . . . . . . . . . . . 8-8
SECTION 9 – Aluminum Products Style 77A Aluminum Coupling . . . . . . . . . . . . . . . . . . . . . . . . 9-2Style 78A Aluminum Snap-Joint Coupling . . . . . . . . . . . . . . . 9-2Aluminum Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2SECTION 10 – Large Diameter AGS Vic-Ring Products Large Diameter Piping Solutions . . . . . . . . . . . . . . . . . . . . . 10-2Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings. . . 10-3Style W07 AGS Rigid Coupling for AGS Vic-Ring System . . . 10-4Style W77 AGS Flexible Coupling for AGS Vic-Ring System . 10-5SECTION 11 – Pipe Preparation ToolsVic-Easy Roll Grooving Tools – Field Portable
VE12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-2VE26 S/C/SS/P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-3VE26/VE46 Power Drive Kit . . . . . . . . . . . . . . . . . . . . . . .11-3VE46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-3VE226 B/S/M/C/BSS/MSS/P . . . . . . . . . . . . . . . . . . . . . .11-4VE226 Power Drive Kit . . . . . . . . . . . . . . . . . . . . . . . . . . .11-4
Vic-Easy Roll Grooving Tools – Field FabricationVE106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-5VE206 Portable Roll Grooving Tool . . . . . . . . . . . . . . . . . .11-6VE272SFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-7VE270FSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-9VE416FS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-11VE416FSD/417FSD . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-13VE450FSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-15
Vic-Easy Roll Grooving Tools – Shop FabricationVE268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-16VE414MC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-18VE460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-20VE872 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-22Victaulic Fabrication Cell . . . . . . . . . . . . . . . . . . . . . . . .11-23
Vic-Easy Tool AccessoriesVPD752 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-24VAPS112 Pipe Stand . . . . . . . . . . . . . . . . . . . . . . . . . . .11-24VAPS224 Pipe Stand . . . . . . . . . . . . . . . . . . . . . . . . . . .11-25VAPS236 Pipe Stand . . . . . . . . . . . . . . . . . . . . . . . . . . .11-25VAPS1672 Pipe Stand . . . . . . . . . . . . . . . . . . . . . . . . . .11-26VE436MC Slide Conversion Kit . . . . . . . . . . . . . . . . . . .11-26
Cut Grooving ToolsVG28GD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-27VG28GD-ABR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-28VDG26GD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-28VG824 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-29VG824-ABR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-30VG824DG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-31VG828 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-32VG412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-33Vic-Groover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-34
Pipe Preparation Tool AccessoriesPower Mule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-36PT-100-A Go/No-Go Pipe Tape . . . . . . . . . . . . . . . . . . .11-36PT-102 AGS Go/No-Go Pipe Tape . . . . . . . . . . . . . . . . .11-37
III
Table of ContentsTA
BLE
OF C
ON
TENTS
VICTAULIC.COM PL2016-GENERAL-C
Swing Handle Wrench . . . . . . . . . . . . . . . . . . . . . . . . . .11-37Vic-Adjustable Cut Grooving Tools for PVC Plastic Pipe
VPG26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-38VPG824 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-38
Hole Cutting ToolsVHCT900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-39HCT908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-39Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-39Vic-Tap II Hot Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-40
Pipe Cut-Off ToolsVCT1 - Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-41VCT2 - Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-41Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-41
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-42Terms and Conditions of Tool Rental . . . . . . . . . . . . . . . . . 11-43Terms and Conditions of Sale . . . . . . . . . . . . . Inside Back CoverWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back CoverVictaulic Sales and Service Centers . . . . . . . . . . . . . . Back Cover
VICTAULIC.COM PL2016-GENERAL-CIV
Table of ContentsTA
BLE
OF
CO
NTE
NTS
Gasket Selection Guide
Gasket Selection Guide
IMPORTANT PLEASE READ BEFORE ORDERING. Gasket selection must always be specified on your order.
Standard Gaskets
IPS
GRADETEMP.
RANGE* COMPOUNDCOLOR CODE GENERAL SERVICE GUIDELINES
E –30°F to +230°F –34°C to +110°C EPDM Green
Stripe
May be specified for hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES.
EHP‡–30°F to +250°F –34°C to +120°C EPDM
Red and Green Stripes
May be specified for hot water service within the specified temperature range. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES.
T –20°F to +180°F –29°C to +82°C Nitrile Orange
Stripe
May be specified for petroleum products, hydrocarbons, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not compatible for use with hot, dry air over +140°F | +60°C and water over +150°F | +66°C. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES.
E2 Ambient EPDMDouble Green Stripe
UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 72. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES.
* For specific chemical and temperature compatibility, refer to the Gasket Selection Guide (05.01) which includes the Gasket Chemical Services Short Report or refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids.
‡ The Grade EHP gasket is only available on Style 107, 607 and 177 couplings
V
GasketsG
ASk
ET SELEC
TION
GU
IDE
VICTAULIC.COM PL2016-GENERAL-C
Special Gaskets
IPS
GRADETEMP.
RANGE* COMPOUNDCOLOR CODE GENERAL SERVICE GUIDELINES
M2 –40°F to +160°F –40°C to +71°C
Epichloro-hydrin
White Stripe
Specially compounded to provide superior service for common aromatic fuels at low temperatures. Also suitable for certain ambient temperature water services.
V –30°F to +180°F –34°C to +82°C Neoprene Yellow
Stripe
May be specified for hot lubricating oils and certain chemicals. Good oxidation resistance. Will not support combustion.
O +20°F to +300°F –7°C to +149°C
Fluoro-elastomer
Blue Stripe
May be specified for many oxidizing acids, petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES.
L –30°F to +350°F –34°C to +177°C Silicone Red
Gasket
May be specified for dry heat, air without hydrocarbons to +350°F | +177°C and certain chemical services.
A +20°F to +180°F –7°C to +82°C White Nitrile White
Gasket
No carbon black content. May be used for food. Meets FDA requirements. Conforms to CFR Title 21 Part 177.2600. Not compatible for use with hot, dry air over +140°F | +60°C and water over +150°F | +66°C. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES.
HMT (T EndSeal™)
–20°F to +150°F –29°C to +66°C Nitrile
Orange and
Silver Stripes
Specially compounded with excellent oil resistance and a high modulus for resistance to extrusion. May be specified for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. For maximum gasket life under pressure extremes, the temperature should be limited to +120°F | +49°C. NOT COMPATIBLE FOR USE WITH hot water services over +150°F | +66°C or for hot, dry air over +140°F | +60°C.
EF – 30°F to + 230°F –34°C to +110°C EPDM Green
“X”
May be specified for hot and cold water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. Also meets hot and cold potable water requirements per DVGW, KTW, ÖVGW, SVGW and French ACS (Crecep), approved for W534, approved for EN681-1 Type WA cold potable and Type WB hot potable water service. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES.
EW – 30°F to + 230°F –34°C to +110°C EPDM Green
“W”
May be specified for hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. WRAS approved material to BS 6920 for cold and hot potable water service up to +149°F | +65°C. UL Classified in accordance with ANSI/NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES.
* For specific chemical and temperature compatibility, refer to the Gasket Selection Guide (05.01) which includes the Gasket Chemical Services Short Report or refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids.
VI
GasketsG
ASk
ET
SELE
CTI
ON
GU
IDE
VICTAULIC.COM PL2016-GENERAL-C
Special Gaskets
AWWA COUPLING
GRADETEMP.
RANGE* COMPOUNDCOLOR CODE GENERAL SERVICE GUIDELINES
S –20°F to +180°F –29°C to +82°C Nitrile Orange
Stripe
Specially compounded to conform to ductile pipe surfaces. May be specified for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not compatible for use with hot, dry air over +140°F | +60°C and water over +150°F | +66°C. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES.
M –20°F to +200°F –29°C to +93°C
Haloge- nated Butyl
Brown Stripe
May be specified for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. Readily conforms to ductile iron pipe surfaces. UL Classified in accordance with ANSI/NSF 61 for cold +86°F | +30°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES.
* For specific chemical and temperature compatibility, refer to the Gasket Selection Guide (05.01) which includes the Gasket Chemical Services Short Report or refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids.
Price List Request Form
VII
GasketsG
ASk
ET SELEC
TION
GU
IDE
VICTAULIC.COM PL2016-GENERAL-C
SECTION 1 – Couplings and Fittings
Couplings and Fittings
1-1VICTAULIC.COM PL2016-GENERAL-C
Style 107H QuickVic™ Rigid Coupling for Steel
Grooved IPS Pipe Couplings
QuickVic™ Rigid Coupling for Steel
STYLE 107HRefer to publication 06.21
2 – 8” Style 107H
STYLE 107H – GRADE “EHP” OR “T” GASkET
PIPE Aprx. Wgt. Ea.COUPLING COMPLETE †
With Grade “EHP” or “T” Gasket SPARE PARTSInches
Lbs
Price Each Grade “EHP” or “T” Gasket
Nom. Size
Outside Dia. Painted Galv.
2 2.375 2.1 $88.00 $128.50 $69.502Z\x 2.875 2.5 123.50 173.50 72.00
3 3.500 3.1 132.00 187.00 90.004 4.500 3.9 167.00 244.50 114.005 5.563 5.1 238.00 355.00 134.506 6.625 6.8 284.50 422.00 141.008 8.625 10.5 427.50 656.50 203.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Style 107N QuickVic™ Rigid Coupling
QuickVic™ Rigid Coupling
STYLE 107NRefer to publication 06.23
2 – 8”
10 – 12”
STYLE 107N – GRADE “EHP” OR “T” GASkET
PIPEAprx. Wgt. Ea. COUPLING COMPLETE †
With Grade “EHP” or “T” GasketSPARE PARTS
InchesOutside
Dia. Lbs
Price Each Price Each Grade “EHP” or “T” Gasket
Nom. Size Painted Galv.
2 2.375 2.7 $88.00 $128.50 $69.502Z\x 2.875 3.0 123.50 173.50 72.003 3.500 3.7 132.00 187.00 90.004 4.500 5.1 167.00 244.50 114.005 5.563 7.0 238.00 355.00 134.506 6.625 8.2 284.50 422.00 141.008 8.625 15.1 427.50 656.50 203.50
10 10.750 23.6 660.00 1046.00 211.5012 12.750 27.2 909.00 1373.50 225.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
VICTAULIC.COM PL2016-GENERAL-C1-2
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Style 07 Zero-Flex™ Rigid Coupling
Zero-Flex™ Rigid Coupling
STYLE 07
(with Style 77 gasket)Refer to publication 06.02
STYLE 07 – GRADE “E” OR “T” GASkET OR FLUSH-SEAL™ GASkET
PIPE
Aprx. Wgt. Ea.
COUPLING COMPLETE †
With Grade “E” or “T” Gasket
COUPLING COMPLETE †
with Flush-Seal “E” or “T” Gasket SPARE PARTS
Inches
Lbs.
Price Each Price Each Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. Painted Galv. No. *
Size § Inches
1 1.315 1.6 $80.50 $109.50 $103.50 $135.00 2 C\, x 2
1Z\v 1.660 1.7 80.50 113.50 104.00 140.50 2 C\, x 2
1Z\x 1.900 1.9 85.50 113.50 119.00 154.00 2 C\, x 22 2.375 2.2 107.00 158.50 147.00 197.50 2 Z\x x 2Z\x
2Z\x 2.875 2.6 151.50 213.50 227.50 299.50 2 Z\x x 2C\v
3 3.500 3.0 158.50 227.50 231.00 314.50 2 Z\x x 2Z\x
4 4.500 4.8 205.50 300.00 269.50 373.00 2 Z\x x 2C\v
5 5.563 6.7 289.50 428.50 548.00 728.00 2 B\, x 3Z\v
6 6.625 8.3 348.00 516.00 522.50 716.00 2 B\, x 3Z\v
8 8.625 15.1 525.00 744.50 786.50 1095.50 2 C\v x 4Z\v
10 10.750 23.5 852.50 1335.50 1296.00 1871.50 2 M\, x 6Z\x
12 12.750 28.2 1175.50 1753.50 1647.00 2306.00 2 M\, x 6Z\x
* Number of bolts equals number of segments supplied.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Style 07 Zero-Flex Rigid Coupling with Silicone Grade “L” Gasket or Fluoroelastomer Grade “O” Gasket
Zero-Flex™ Rigid Coupling
STYLE 07
(with Style 77 gasket)Refer to publication 06.02
STYLE 07 – SILICONE GRADE “L” GASkET OR FLUOROELASTOMER GRADE “O” GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Silicone
Grade “L” Gasket
COUPLING COMPLETE †
With Fluoroelastomer Grade “O” Gasket SPARE PARTS
Inches
Lbs.
Price Each Price Each Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. Painted Galv. No. *
Size § Inches
1 1.315 1.6 $302.50 $332.00 $359.00 $387.00 2 C\, x 2
1Z\v 1.660 1.7 453.00 485.50 535.00 573.50 2 C\, x 2
1Z\x 1.900 1.9 345.00 373.50 421.00 548.00 2 C\, x 22 2.375 2.2 414.50 498.00 562.00 661.00 2 Z\x x 2Z\x
2Z\x 2.875 2.6 463.00 558.00 684.00 806.00 2 Z\x x 2C\v
3 3.500 3.0 487.50 592.00 820.50 965.00 2 Z\x x 2Z\x
4 4.500 5.3 562.00 694.00 1131.00 1470.00 2 Z\x x 2C\v
5 5.563 6.7 593.00 720.50 1402.50 1532.00 2 B\, x 3Z\v
6 6.625 8.3 668.50 826.00 1630.50 2042.50 2 B\, x 3Z\v
8 8.625 15.1 782.50 1038.00 2702.50 4514.00 2 C\v x 4Z\v
10 10.750 23.5 851.00 1241.50 3197.00 3587.50 2 M\, x 6Z\x
12 12.750 28.2 1070.00 1531.50 4423.50 4885.00 2 M\, x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
1-3
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Style W07 AGS Rigid Coupling with Grade “E” Flush-Seal™ Gasket
Rigid Coupling
AGS STYLE W07Refer to publication 20.02
14 – 24”
26 – 48”
AGS STYLE W07 – GRADE “E” FLUSH-SEAL™ GASkET
PIPEAprx.
Wgt. Ea
COUPLING COMPLETE † With Flush-Seal Grade “E”
Gasket SPARE PARTSInches
Lbs.
Price Each Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. No.
Size § Inches
14 14.000 48.9 $859.00 $1313.00 2 1 x 5Z\x
16 16.000 60.8 1249.00 1836.00 2 1 x 5Z\x
18 18.000 71.2 1392.50 2073.50 2 1 x 5Z\x
20 20.000 81.7 1944.50 2765.50 2 1Z\, x 5Z\x
22 22.000 116.0 + + 2 1Z\, x 5Z\x
24 24.000 116.2 2126.50 3219.50 2 1Z\, x 5Z\x
26 26.000 205.0 + + 4 1C\, x 6
28 28.000 220.0 + + 4 1C\, x 6
30 30.000 227.0 + + 4 1Z\v x 7
32 32.000 242.0 + + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 + + 4 1Z\v x 7
38 38.000 340.0 + + 4 1Z\x x 7
40 40.000 340.0 + + 4 1Z\x x 7
42 42.000 360.0 + + 4 1Z\x x 7
44 44.000 390.0 + + 4 1Z\x x 7
46 46.000 415.0 + + 4 1Z\x x 7
48 48.000 425.0 + + 4 1Z\x x 7
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
VICTAULIC.COM PL2016-GENERAL-C1-4
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Style W07 AGS Rigid Coupling with Grade “T” or Silicone Gasket
Rigid Coupling
AGS STYLE W07Refer to publication 20.02
14 – 24”
26 – 48”
AGS STYLE W07 – GRADE “T” OR “L” FLUSH-SEAL™ GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Flush-Seal Silicone Grade “T” or “L” Gasket SPARE PARTS
Inches
Lbs
Price Each Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. No.
Size § Inches
14 14.000 48.9 $1015.50 $1470.50 2 1 x 5Z\x
16 16.000 60.8 1439.50 2028.00 2 1 x 5Z\x
18 18.000 71.2 1782.00 2268.50 2 1 x 5Z\x
20 20.000 81.7 2177.00 2274.00 2 1Z\, x 5Z\x
22 22.000 116.0 + + 2 1Z\, x 5Z\x
24 24.000 116.2 2374.50 3467.00 2 1Z\, x 5Z\x
26 26.000 205.0 + + 4 1C\, x 6
28 28.000 220.0 + + 4 1C\, x 6
30 30.000 227.0 + + 4 1Z\v x 7
32 32.000 242.0 + + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 + + 4 1Z\v x 7
38 38.000 340.0 + + 4 1Z\x x 7
40 40.000 340.0 + + 4 1Z\x x 7
42 42.000 360.0 + + 4 1Z\x x 7
44 44.000 390.0 + + 4 1Z\x x 7
46 46.000 415.0 + + 4 1Z\x x 7
48 48.000 425.0 + + 4 1Z\x x 7
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Style 177 QuickVic Flexible Coupling for Steel
QuickVic™ Flexible Coupling for Steel
STYLE 177Refer to publication 06.20
STYLE 177 – GRADE “EHP” OR “T” GASkET
PIPEAprx.
Wgt. Ea.COUPLING COMPLETE †
With Grade “EHP” or “T” Gasket SPARE PARTSInches
Lbs
Price EachGrade “EHP” or
“T” GasketNom. Size
Outside Dia. Painted Galv.
2 2.375 2.0 $89.00 $128.00 $69.502Z\x 2.875 2.4 116.50 164.00 72.00
3 3.500 3.1 124.50 178.50 90.004 4.500 3.7 205.00 300.50 114.005 5.563 4.8 345.50 502.00 134.506 6.625 6.3 350.50 519.00 141.008 8.625 10.5 519.00 793.00 203.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
1-5
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Style 177N QuickVic Flexible Coupling for Steel
QuickVic™ Flexible Coupling for Steel
STYLE 177NRefer to publication 06.24
STYLE 177N – GRADE “EHP” OR “T” GASkET
PIPEAprx.
Wgt. Ea.COUPLING COMPLETE †
With Grade “EHP” or “T” Gasket SPARE PARTSInches
Lbs
Price EachGrade “EHP” or
“T” GasketNom. Size
Outside Dia. Painted Galv.
2 2.375 3.3 $89.00 $128.00 $69.502Z\x 2.875 3.8 116.50 164.00 72.00
3 3.500 4.3 124.50 178.50 90.004 4.500 7.4 205.00 300.50 114.005 5.563 4.8 345.50 502.00 134.506 6.625 12.8 350.50 519.00 141.008 8.625 15.5 519.00 793.00 203.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
NOTE: 5 and 8” are Style 177 coupling
Style 77 Standard Flexible Coupling
VICTAULIC.COM PL2016-GENERAL-C1-6
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Standard Coupling
STYLE 77Refer to publication 06.04
C\v – 12”
14 – 24”
STYLE 77 – GRADE “E” OR “T” GASkET OR FLUSH-SEAL™ GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE †
With Grade “E” or “T” Gasket
COUPLING COMPLETE †
With Flush-Seal “E” or “T” Gasket SPARE PARTS
Inches
Lbs
Price Each Price Each Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. Painted Galv. No.*
Size § Inches
C\v 1.050 1.1 $63.50 $83.50 $83.50 $108.00 2 C\, x 21 1.315 1.2 65.50 88.00 87.00 113.00 2 C\, x 2
1Z\v 1.660 2.0 80.50 113.00 104.50 139.00 2 Z\x x 2Z\x
1Z\x 1.900 2.1 89.50 124.50 122.00 162.00 2 Z\x x 2Z\x
2 2.375 2.6 89.00 128.00 132.00 180.00 2 Z\x x 2Z\x
2Z\x 2.875 3.1 116.50 164.00 196.50 255.00 2 Z\x x 2C\v
3 3.500 3.7 124.50 178.50 202.50 269.50 2 Z\x x 2C\v
3Z\x 4.000 5.6 201.00 289.00 277.50 365.00 2 B\, x 3Z\v
4 4.500 6.7 205.00 300.50 342.50 396.50 2 B\, x 3Z\v
5 5.563 10.5 345.50 502.00 611.00 814.00 2 C\v x 4Z\v
6 6.625 12.0 350.50 519.00 543.50 750.50 2 C\v x 4Z\v
8 8.625 20.8 519.00 793.00 805.50 1136.50 2 M\, x 510 10.750 31.1 709.50 1101.50 1010.50 1450.00 2 1 x 612 12.750 27.8 956.00 1443.50 1231.50 1803.00 2 1 x 6Z\x
28 I.D.** 35.500 95.0 + + + + 4 1 x 5Z\x
30 I.D.** 37.880 127.2 + + + + 4 1 x 5Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Number of bolts equals number of segments supplied.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
NOTE: 14 – 72” standard for this size range is the W77 AGS flexible coupling.
** Requires Vic-Ring for assembly.
Standard Coupling
STYLE 77 FOR CUT GROOVE SYSTEMS ONLYRefer to publication 06.04
STYLE 77 – GRADE “E” GASkET OR FLUSH-SEAL™ GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE †
With Grade “E”
COUPLING COMPLETE †
With Flush-Seal “E” SPARE PARTSInches
Lbs
Price Each Price Each Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. Painted Galv. No.*
Size § Inches
14 ‡ 14.000 39.2 1385.50 1756.00 1751.50 2121.00 2 1 x 3Z\x
16 ‡ 16.000 45.0 1738.50 2270.00 2132.00 2664.00 2 1 x 3Z\x
18 ‡ 18.000 64.1 2097.00 2766.50 2572.00 3242.00 2 1Z\, x 420 ‡ 20.000 74.8 2811.50 3761.50 3392.50 4340.00 2 1Z\, x 422 ‡ 22.000 82.6 2893.00 3957.50 – – 2 1Z\, x 424 ‡ 24.000 89.6 2948.50 3926.00 3593.50 4570.50 2 1Z\, x 4
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Number of bolts equals number of segments supplied.
§ Metric thread size bolts available. Contact Victaulic.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
NOTE: 14 – 72” standard for this size range is the W77 AGS flexible coupling.
For roll groove systems please see AGS Style W77.
NOTE: Prices shown for 14 – 24” are for couplings with grade E gasket. For couplings with grade T gaskets contact Victaulic for pricing.
1-7
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Style 77 Standard Flexible Coupling with Silicone Grade “L” Gasket or Fluoroelastomer Grade “O” Gasket
Standard Coupling
STYLE 77Refer to publication 06.04
STYLE 77 – SILICONE GRADE “L” GASkET OR FLUOROELASTOMER GRADE “O” GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Silicone
Grade “L” Gasket
COUPLING COMPLETE †
With Fluoroelastomer Grade “O” Gasket SPARE PARTS
Inches
Lbs
Price Each Price Each Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. Painted Galv. No.*
Size § Inches
C\v 1.050 1.1 $272.00 $293.00 $333.50 $354.50 2 C\, x 21 1.315 1.2 272.00 294.00 333.50 387.00 2 C\, x 2
1Z\v 1.660 2.0 314.50 346.00 393.00 425.00 2 C\, x 2
1Z\x 1.900 2.1 333.50 368.00 412.00 446.50 2 Z\x x 2Z\x
2 2.375 2.6 359.00 432.50 482.50 569.50 2 Z\x x 2Z\x
2Z\x 2.875 3.1 393.50 444.50 580.00 630.50 2 Z\x x 2C\v
3 3.500 3.7 417.50 510.00 698.00 823.00 2 Z\x x 2C\v
3Z\x 4.000 5.6 521.50 607.00 1039.50 1128.00 2 B\, x 3Z\v
4 4.500 6.7 529.50 667.00 1011.00 1208.50 2 B\, x 3Z\v
5 5.563 10.5 643.00 809.00 1329.00 1495.50 2 C\v x 4Z\v
6 6.625 12.0 663.50 874.00 1475.00 1786.50 2 C\v x 4Z\v
8 8.625 20.8 798.50 1090.50 2419.00 2933.50 2 M\, x 510 10.750 31.1 911.00 1301.50 3070.50 3463.00 2 1 x 612 12.750 27.8 1139.50 1626.00 4226.50 4714.50 2 1 x 6Z\x
* Number of bolts equals number of segments supplied.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
VICTAULIC.COM PL2016-GENERAL-C1-8
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Style W77 AGS Flexible Coupling with Grade “E” Flush-Seal™ Gasket
Flexible Coupling
AGS STYLE W77Refer to publication 20.03
14 – 24”
26 – 60”
AGS STYLE W77 – GRADE “E” FLUSH-SEAL™ GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Flush-Seal Grade “E”
Gasket SPARE PARTSInches
Lbs
Price Each Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. No. *
Size § Inches
14 14.000 47.5 $1007.00 $1470.00 2 1 x 5Z\x
16 16.000 57.8 1312.50 1887.50 2 1 x 5Z\x
18 18.000 65.0 1461.50 2106.00 2 1 x 5Z\x
20 20.000 82.3 2042.00 2880.50 2 1Z\, x 5Z\x
22 22.000 107.0 + + 2 1Z\, x 5Z\x
24 24.000 106.8 2232.50 3270.50 2 1Z\, x 5Z\x
26 26.000 205.0 + + 4 1Z\, x 6
28 28.000 220.0 + + 4 1Z\, x 6
30 30.000 227.0 + + 4 1Z\v x 7
32 32.000 242.0 + + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 + + 4 1Z\v x 7
38 38.000 340.0 + + 4 1Z\x x 7
40 40.000 340.0 + + 4 1Z\x x 7
42 42.000 360.0 + + 4 1Z\x x 7
44 44.000 390.0 + + 4 1Z\x x 7
46 46.000 415.0 + + 4 1Z\x x 7
48 48.000 425.0 + + 4 1Z\x x 7
54 54.000 648.0 + + 4 1Z\x x 7
56 56.000 676.0 + + 4 1Z\x x 7
60 60.000 720.0 + + 4 1Z\x x 7
62 62.000 956.0 + + 4 1Z\x x 7
72 72.000 1140.0 + + 4 1Z\x x 7Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
1-9
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Style W77 AGS Flexible Coupling with Grade “T” or “L” Flush-Seal™ Gasket
Flexible Coupling
AGS STYLE W77Refer to publication 20.03
14 – 24”
26 – 60”
AGS STYLE W77 – GRADE “T” OR “L” FLUSH-SEAL™ GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Flush-Seal Silicone Grade “T” or “L” Gasket SPARE PARTS
Inches
Lbs
Price Each Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. No.
Size § Inches
14 14.000 47.5 $1163.50 $1699.50 2 1 x 5Z\x
16 16.000 57.8 1503.50 2170.50 2 1 x 5Z\x
18 18.000 65.0 1656.00 2403.00 2 1 x 5Z\x
20 20.000 82.3 2275.50 3253.50 2 1Z\, x 5Z\x
22 22.000 107.0 + + 2 1Z\, x 5Z\x
24 24.000 106.8 2482.50 3678.50 2 1Z\, x 5Z\x
26 26.000 205.0 + + 4 1Z\, x 6
28 28.000 220.0 + + 4 1Z\, x 6
30 30.000 227.0 + + 4 1Z\v x 7
32 32.000 242.0 + + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 + + 4 1Z\v x 7
38 38.000 340.0 + + 4 1Z\x x 7
40 40.000 340.0 + + 4 1Z\x x 7
42 42.000 360.0 + + 4 1Z\x x 7
44 44.000 390.0 + + 4 1Z\x x 7
46 46.000 415.0 + + 4 1Z\x x 7
48 48.000 425.0 + + 4 1Z\x x 7
54 54.000 648.0 + + 4 1Z\x x 7
56 56.000 676.0 + + 4 1Z\x x 7
60 60.000 720.0 + + 4 1Z\x x 7
62 62.000 956.0 + + 4 1Z\x x 7
72 72.000 1140.0 + + 4 1Z\x x 7Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
VICTAULIC.COM PL2016-GENERAL-C1-10
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Style 75 Flexible Coupling
Flexible Coupling
STYLE 75Refer to publication 06.05
STYLE 75 – GRADE “E” OR “T” GASkET OR FLUSH-SEAL™ GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE †
With Grade “E” or “T” Gasket
COUPLING COMPLETE †
With Flush-Seal “E” or “T” Gasket
SPARE PARTS
Inches
Lbs
Price Each Price EachPlated Bolt &
NutNom. Size
Outside Dia. Painted Galv. Painted Galv.
Size § Inches
1 1.315 1.3 $54.50 $79.50 $125.50 $158.00 C\, x 2
1Z\v 1.660 1.4 56.50 80.50 129.50 161.50 C\, x 2
1Z\x 1.900 1.5 71.50 95.00 157.00 189.00 C\, x 22 2.375 1.8 90.00 129.50 173.50 205.00 C\, x 2
2Z\x 2.875 1.9 117.50 166.50 225.00 268.50 C\, x 23 3.500 2.9 125.50 180.50 180.50 228.00 Z\x x 2C\v
3Z\x 4.000 2.9 180.00 239.00 254.50 313.00 Z\x x 2C\v
4 4.500 4.1 209.00 304.50 281.00 426.50 Z\x x 2C\v
5 5.563 5.8 350.50 509.00 426.00 533.00 B\, x 3Z\v
6 6.625 7.0 355.50 526.50 410.00 528.00 B\, x 3Z\v
8 8.625 12.9 526.50 804.00 615.50 809.50 C\v x 4Z\v
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Style 75 Flexible Coupling with Silicone Gasket
Flexible Coupling
STYLE 75Refer to publication 06.05
STYLE 75 – SILICONE GRADE “L” GASkET
PIPEAprx.
Wgt. Ea.COUPLING COMPLETE †
With Silicone Grade “L” GasketSPARE PARTS
Inches
Lbs
Price EachPlated Bolt &
NutNom. Size
Outside Dia. Painted Galv.
Size § Inches
1 1.315 1.3 $266.00 $292.00 C\, x 2
1Z\v 1.660 1.4 305.50 327.00 C\, x 2
1Z\x 1.900 1.5 319.00 340.50 C\, x 22 2.375 1.7 341.50 399.50 C\, x 2
2Z\x 2.875 1.9 379.00 438.50 C\, x 23 3.500 2.9 399.00 473.50 Z\x x 2C\v
3Z\x 4.000 2.9 + + Z\x x 2C\v
4 4.500 4.1 459.50 556.50 Z\x x 2C\v
5 5.563 5.8 471.50 547.50 B\, x 3Z\v
6 6.625 7.0 535.00 628.50 B\, x 3Z\v
8 8.625 12.9 614.50 775.50 C\v x 4Z\v
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
1-11
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Style 750 Reducing Coupling
Reducing Coupling
STYLE 750Refer to publication 06.08
STYLE 750 – GRADE “E” OR “T” GASkET
PIPEAprx
Wgt. Ea.COUPLING COMPLETE †
With Grade “E” or “T” GasketSPARE PARTS
Nominal Size
Lbs
Price EachPlated Bolt &
Nut
Inches Painted Galv.Size § Inches
2 x 1 2.0 $132.50 $170.50 C\, x 2
1Z\x 2.0 141.00 182.50 C\, x 2
2Z\x x 2 2.9 179.50 235.00 C\, x 23 x 2 4.6 211.50 291.50 Z\x x 2C\v
2Z\x 4.1 205.00 279.00 Z\x x 2C\v
4 x 2 8.8 317.50 443.00 B\, x 3Z\v
2Z\x 8.3 303.50 432.50 B\, x 3Z\v
3 6.4 255.00 355.50 B\, x 3Z\v
5 x 4 10.8 369.50 527.00 C\v x 4Z\v
6 x 4 16.1 501.50 739.00 C\v x 4Z\v
5 12.6 471.50 663.00 C\v x 4Z\v
8 x 6 22.3 710.00 1026.00 M\, x 510 x 8 32.0 868.50 1508.00 1 x 6
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
Support rings required on vertical installations. Please specify on order.
A steel assembly washer is optionally available to prevent pipe from telescoping on vertical installations. No extra charge when specified on order with coupling.
NOTE: See Spare Parts Section for spare part prices.
Style 741 Vic-Flange® Adapter
Vic-Flange Adapters
STYLE 741
Grooved Pipe Adapters to ANSI Class 125 and 150 Flanges.Refer to publication 06.06
STYLE 741 – GRADE “E” OR “T” GASkET
PIPEAprx.
Wgt. Ea.COUPLING COMPLETE †
With Grade “E” or “T” GasketInches
LbsPrice Each
Nom. Size Outside Dia. Painted Galv.STYLE 741 – Hinged
2 2.375 3.1 $301.00 $368.002Z\x 2.875 4.8 356.00 447.00
3 3.500 5.3 384.00 483.504 4.500 7.4 537.50 679.505 5.563 8.6 631.00 799.506 6.625 9.9 753.00 954.008 8.625 16.2 864.50 1132.50
10 10.750 24.2 1282.00 1671.5012 12.750 46.8 1744.50 2405.50
VICTAULIC.COM PL2016-GENERAL-C1-12
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Style W741 AGS Vic-Flange Adapter
Vic-Flange Adapters
STYLE W741
Grooved Pipe Adapters to ANSI Class 125 and 150 Flanges.Refer to publication 20.04
STYLE W741 – GRADE “E”, “T” OR “L” GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or “T”
GasketCOUPLING COMPLETE †
With Grade “L” GasketInches
LbsPrice Each Price Each
Nom. Size Outside Dia. Painted Galv. Painted Galv.14 14.000 70.0 $3453.50 $4353.00 $3769.50 $4668.5016 16.000 88.0 4006.00 5448.50 4345.50 5789.0018 18.000 101.0 4931.00 5836.00 5268.50 6171.5020 20.000 115.0 5933.50 6580.50 6227.50 6875.0024 24.000 160.0 7592.00 9793.00 7869.50 10071.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
The AGS Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and 125 CL. flanges.
Style 743 Vic-Flange Adapter
Vic-Flange Grooved Flange Adapters §
STYLE 743
Grooved Pipe Adapters to ANSI Class 300 Flanges (with Style 741 gasket)Refer to publication 06.06
STYLE 743 – GRADE “E” OR “T” GASkET
PIPEAprx.
Wgt. Ea.COUPLING COMPLETE †
With Grade “E” or “T” GasketInches
LbsPrice Each
Nominal Size Outside Diameter Painted Galv.2 2.375 4.8 $517.50 $640.50
2Z\x 2.875 7.4 522.50 661.003 3.500 9.1 587.00 753.504 4.500 15.3 733.00 998.505 5.563 17.7 895.00 1205.506 6.625 23.4 1059.00 1431.008 8.625 34.3 1401.00 1955.50
10 10.750 48.3 2116.00 2925.0012 12.750 70.5 3148.50 4406.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
§ Utilizes standard ANSI 300 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI class 300 flanges.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
1-13
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Vic-Flange Adapter Notes
Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications, for which the Victaulic flange adapter is oth-erwise well suited, do not provide an adequate mating surface. In such cases, it is recommended that a metal flange washer be inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing surface. See Spare Parts Section for flange washer prices.
Typical applications where a Victaulic flange washer should be used are:
1.When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange. The flange washer is then inserted between the Victaulic flange adapter and the flange gasket.
2.When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Victaulic flange adapter.
3.When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange adapters and the rubber faced flange.
4.When mating C.I. flanges to IPS flanges: the flange washer is placed between two Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g., a flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Victaulic flange adapter. 5.When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in # 1 above.
Flange Washers – Styles 741, W741, 743
Flange Washers
FOR STYLES 741, W741, 743 VIC-FLANGE ADAPTERS
FOR STYLES 741, W741, 743 VIC-FLANGE WASHERS
Flange Size FLANGE WASHERSInches Style 741 ANSI Plated Style 743
2 $278.50 +2Z\x 295.00 +
3 310.50 +4 331.50 +5 349.00 +6 364.50 +8 388.00 +
10 458.00 +12 552.50 +
14 * 626.00 –16 * 709.50 –18 * 795.50 –20 * + –24 * + –
* Flange gaskets supplied for Style W741 AGS Flange
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-14
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Style 72 Outlet Coupling
Outlet Coupling
STYLE 72Refer to publication 06.10
STYLE 72 – GRADE “E” OR “T” GASkET
Nominal Size OUTLET COUPLING COMPLETE † with Grade “E” or “T” GasketSPARE PARTS
Inches Run x Branch
Aprx Wgt. Ea.
Lbs
NPT Female Thd. Branch Plated Bolt & NutPrice Each
Painted Galv.Size § Inches
1Z\x x Z\x 1.4 $251.00 $294.50 C\, x 2
C\v 2.8 251.00 308.00 C\, x 21 2.8 251.00 308.00 C\, x 2
2 x Z\x 3.5 339.00 415.50 C\, x 2
C\v 2.5 339.00 404.50 C\, x 21 3.2 339.00 409.50 C\, x 2
2Z\x x Z\x 4.5 353.00 440.50 Z\x x 2C\v
C\v 4.6 353.00 442.50 Z\x x 2C\v
1 6.0 353.00 456.00 Z\x x 2C\v
1Z\v 5.0 526.50 639.50 B\, x 3Z\v
1Z\x 5.0 526.50 639.50 B\, x 3Z\v
3 x C\v 4.5 335.50 419.50 Z\x x 2C\v
1 8.9 335.50 464.00 B\, x 3Z\v
1Z\v 8.5 559.00 712.00 B\, x 3Z\v
1Z\x 8.5 559.00 712.00 B\, x 3Z\v
4 x C\v 6.3 510.50 635.00 Z\x x 2C\v
1 6.5 510.50 635.00 Z\x x 2C\v
1Z\x 11.6 611.00 798.00 B\, x 3Z\v
2 14.6 611.00 828.50 B\, x 3Z\v
6 x 1 19.3 928.50 1231.50 C\v x 4Z\v
1Z\x 19.3 928.50 1231.50 C\v x 4Z\v
2 19.5 928.50 1234.50 C\v x 4Z\v
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Style 72 Outlet Couplings supplied with painted housing, Grade “E” or “T” gasket with plated neck insert and plated bolts and nuts.
When used on 2 – 3Z\x”/60.3 – 88.9 mm Victaulic cast fittings, contact Victaulic for recommendations. # Sizes noted above are suitable for assembly onto grooved pipe only. For assembly onto Victaulic cast fittings, specially machined Style 72 couplings must be ordered.
1-15
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Style 791 and 792 Vic-Boltless® Coupling
Vic-Boltless Coupling *
STYLES 791 COUPLING AND 792 ASSEMBLY TOOLRefer to publication 06.11
STYLE 791 COUPLING – GRADE “E” OR “T” GASkET OR FLUSH-SEAL™ GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or “T”
Gasket
COUPLING COMPLETE † With Flush-Seal
“E” or “T” GasketInches
LbsPrice Each Price Each
Nom. Size Outside Dia. Painted Galv. Painted Galv.2 2.375 1.8 + + + +
2Z\x 2.875 2.7 + + + +3 3.500 2.6 + + + +4 4.500 4.8 + + + +6 6.625 6.3 + + + +8 8.625 12.0 + + + +
Extra Locking Pins available in color coded strips of 10 pins (see below).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Coupling complete includes one-piece hinged housing, gasket (specify choice on order) and locking pin only. Assembly Tool required for assembly (purchased separately).
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
STYLE 791 COUPLING – SILICONE GRADE “L” GASkET OR FLUOROELASTOMER GRADE “O” GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Silicone
Grade “L” Gasket
COUPLING COMPLETE † With Fluoroelastomer
“O” or “T” GasketInches
LbsPrice Each Price Each
Nom. Size Outside Dia. Painted Galv. Painted Galv.2 2.375 1.8 + + + +
2Z\x 2.875 2.7 + + + +3 3.500 2.6 + + + +4 4.500 4.8 + + + +6 6.625 6.3 + + + +8 8.625 12.0 + + + +
Extra Locking Pins available in color coded strips of 10 pins (see below).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Coupling complete includes one-piece hinged housing, gasket (specify choice on order) and locking pin only. Assembly Tool required for assembly (purchased separately).
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
STYLE 792 REMOVABLE ASSEMBLY TOOL
Size Price EachOne size fits all sizes Style 791 Couplings +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Style 791 Locking Pins
Locking Pins
STYLE 791
Victaulic locking pins must be used to assemble Style 791 couplings. Use of other objects are strictly prohibited.
STYLE 791
Nom. Pipe SizeSPARE PARTS
Locking Pin2 B\zn x 2 +
2Z\x C\, x 2 +3 C\, x 2 +4 M\zn x 2Z\, +6 Z\x x 2C\zn +8 Z\x x 2M\zn +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-16
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Style 78 Snap-Joint™ Coupling
Snap-Joint™ Coupling
STYLE 78
(with Style 77 gasket)Refer to publication 06.09
STYLE 78 – GRADE “E” OR “T” GASkET OR FLUSH-SEAL™ GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or “T”
Gasket
COUPLING COMPLETE With Flush-Seal
Grade “E” or “T” Gasket † Inches
LbsPrice Each Price Each
Nom. Size Outside Dia. Painted Galv. Painted Galv.1 (a) 1.315 0.8 $164.50 $192.00 $187.00 $212.50
1Z\v (a) 1.660 1.1 210.50 251.00 245.50 285.001Z\x (a) 1.900 1.7 201.50 246.00 234.00 276.50
2 (c) 2.375 1.7 203.00 245.50 241.00 292.002Z\x (c) 2.875 2.5 254.50 316.50 330.00 389.00
3 (c) 3.500 2.8 244.50 316.50 316.50 378.004 (c) 4.500 5.5 355.00 451.00 419.50 515.005 (c) 5.563 9.8 704.50 905.50 938.00 1145.506 (c) 6.625 10.7 755.00 982.50 919.50 1125.508 (c) 8.625 15.3 1146.00 1466.00 1390.00 1466.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
(a) Available with steel toggle locking assembly only. (c) Available with cast handle only.
NOTE: See Spare Parts Section for spare part prices.
Style HP-70 Rigid Coupling
Rigid Coupling
STYLE HP-70
(with Style 77 Gasket)Refer to publication 06.12
STYLE HP-70 – GRADE “E” OR “T” GASkET
PIPEAprx.
Wgt. Ea.COUPLING COMPLETE † with “E” or “T” Gasket
SPARE PARTS
Inches
Lbs
Price EachPlated
Bolt & Nut
Nom. SizeOutside
Dia. Painted Galv.Size § Inches
2 2.375 3.2 $173.50 $232.50 B\, x 2C\v
2Z\x 2.875 4.0 197.50 310.00 B\, x 3Z\x
3 3.500 4.4 198.50 276.00 B\, x 3Z\x
4 4.500 7.5 307.50 430.50 C\v x 4Z\v
6 6.625 16.0 603.00 808.00 M\, x 5Z\x
8 8.625 26.3 888.00 1356.00 1 x 5Z\x
10 10.750 32.8 1481.00 2786.00 1 x 6Z\x
12 12.750 42.1 1733.50 3311.50 1 x 6Z\x
14 14.000 64.0 2299.00 4618.50 1Z\v x 4Z\x
16 16.000 72.0 2691.50 5299.00 1Z\v x 4Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
1-17
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Style HP-70ES Coupling with “ES” Gasket
EndSeal™ Coupling
STYLE HP-70ES
With “ES” GasketRefer to publication 06.13
STYLE HP-70ES – “ES” GASkET
PIPEAprx.
Wgt. Ea.COUPLING COMPLETE †
With “ES” Gasket“ES”
Gasket OnlyPlated
Bolt & Nut Inches
LbsPrice Each
Price EachSize § InchesNom. Size Outside Dia. Painted Galv.
2 2.375 3.2 $229.00 $284.50 $116.00 B\, x 2C\v
2Z\x 2.875 4.0 244.50 310.00 117.50 B\, x 3Z\x
3 3.500 4.6 255.00 327.00 132.00 B\, x 3Z\x
4 4.500 8.2 372.00 458.00 164.00 C\v x 4Z\v
6 6.625 16.4 653.50 808.00 182.00 M\, x 5Z\x
8 8.625 26.0 998.50 1356.00 305.50 1 x 5Z\x
10 10.750 37.2 1818.00 2786.00 645.50 1 x 6Z\x
12 12.750 42.0 2355.50 3311.50 1088.00 1 x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
For use with cement-lined and plastic-coated pipe where protection at pipe ends is desired.
When EndSeal Couplings (Style HP-70ES) are used, special pipe grooving dimensions are required. See publication 25.02 for details. Fittings for use with EndSeal Couplings are of special dimensions and should be specified as “EndSeal Fittings” when ordering.
Style 307 Transition Coupling
Transition Coupling (AWWA to IPS)
STYLE 307Refer to publication 23.03
STYLE 307 – GRADE “M” OR “S” FLUSH-SEAL™ GASkET
PIPE Inches
Aprx. Wgt. Ea.
COUPLING COMPLETE †
With Grade “M” or “S” Flush-Seal Gasket SPARE PARTS
Nom. Size
Mating Pipe O.D.
Lbs
Price Each Grade “M” or “S” Flush-Seal
Gasket Only
Price Ea. Bolt & Nut IPS SteelAWWA Ductile Painted Galv.
3 3.500 3.960 6.0 $479.00 $605.50 $349.00 Z\x x 2C\v
4 4.500 4.800 8.0 551.00 707.00 311.50 Z\x x 3Z\v
6 6.625 6.900 9.0 669.00 851.50 331.00 B\, x 3Z\v
8 8.625 9.050 18.0 836.00 1136.00 376.50 C\v x 510 10.750 11.100 22.0 1072.00 1447.00 654.00 M\, x 6Z\x
12 12.750 13.200 31.1 1428.50 1945.50 681.00 M\, x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
VICTAULIC.COM PL2016-GENERAL-C1-18
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Style 171 Composite Flexible Coupling
Composite Flexible Coupling
STYLE 171Refer to publication 06.22.
STYLE 171 – GRADE “E2” EPDM GASkET
PIPE Aprx. Wgt. Ea.
COUPLING COMPLETE †
With Grade “E2” EPDM Gasket SPARE PARTS
Nom. Size
Outside Dia. Lbs Price Each “E2” EPDM Gasket
1Z\x 1.900 0.8 + +2 2.375 0.9 + +
2Z\x 2.875 1.0 + +3 3.500 1.6 + +4 4.500 1.6 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Style 808 Coupling for Double Groove Pipe
Coupling for Double Groove Pipe
STYLE 808Refer to publication 15.01
STYLE 808 – GRADE “T” GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † with Grade
“HMT” Gasket SPARE PARTSInches
Lbs
Price EachGrade “E” or
“T” Gasket Only
Plated Bolt & Nut Size §
InchesNom. Size Outside Dia. Painted6 6.625 36.0 $1988.00 + 1 x 58 8.625 70.0 4034.00 $523.50 1Z\, x 6
10 10.750 85.0 6128.50 566.50 1Z\, x 612 12.750 105.0 + + 1Z\v x 6
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Style 808 couplings for double grooved pipe require special pipe double groove dimensions. Contact Victaulic for details.
Style 870 Rigid Coupling
Rigid Coupling
STYLE 870Refer to publication 100.02.
STYLE 870 – PTFE SEAL
PIPE Aprx. Wgt. Ea.
COUPLING COMPLETE
With PTFE Seal Assembly SPARE PARTS
Inches
Lbs Price EachPTFE Seal Assembly
Nom. Size
Outside Dia.
2 2.375 8.4 $277.00 $222.502Z\x 2.875 9.5 322.00 256.50
3 3.500 10.6 366.50 293.004 4.500 16.1 420.00 336.006 6.625 25.6 546.50 436.508 8.625 43.2 797.00 637.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
1-19
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Gaskets
Gaskets For pricing couplings complete with any special gaskets – take the standard coupling price with Grade “E” or “T” gasket complete (PL2014 General Price List), subtract the standard gasket price, then add on the price of the special gasket.
Gasket guidelines can be found in the latest Victaulic Gasket Selection Guide (publication 05.01). This information is general in scope and Victaulic should be consulted for guidelines when a question arises.
GASkETS FOR STYLES 07, HP-70, 75, 77, 78, 791, AND 997 COUPLINGS
Nom. Size Standard Gaskets Special Gaskets
InchesGrade “E”
EPDMGrade “T”
NitrileFlush-Seal Grade “E”
Flush-Seal Grade “T”
Grade “EW” EPDM
Grade “O” Fluoroelastomer
Grade “V” Black
Neoprene
Flush-Seal Grade “A”
White Nitrile
Flush-Seal Grade “O”
FluoroelastomerC\v $48.00 $48.00 $74.50 $74.50 – $305.00 + $179.50 $450.501 48.00 48.00 74.50 74.50 $57.50 368.50 + 129.00 590.50
1Z\v 56.00 56.00 83.00 83.00 65.50 432.00 + 295.00 653.00
1Z\x 58.50 58.50 96.50 96.50 72.00 360.50 + 295.00 536.002 49.00 49.00 94.50 94.50 59.50 366.00 + 162.50 667.50
2Z\x 58.50 58.50 143.50 143.50 71.50 593.50 + 155.50 1029.003 65.00 65.00 145.00 145.00 78.50 728.00 + 190.50 869.00
3Z\x 74.50 74.50 159.00 159.00 – + – – –4 85.00 85.00 162.50 162.50 103.00 1011.50 + 260.50 1209.50
4Z\x 195.00 195.00 – – – – – – –5 130.00 130.00 415.00 415.00 – 1255.00 + 526.00 2067.006 117.50 117.50 315.50 315.50 141.00 1405.50 + 620.50 1680.008 171.00 171.00 464.50 464.50 207.50 2351.50 + 778.50 3884.00
10 220.00 220.00 580.50 580.50 265.00 3068.00 + 789.00 6125.0012 306.50 306.50 691.00 691.00 366.50 4254.50 + 795.50 6254.50
13Z\x + + – – – – – – –14 OGS 458.00 869.50 843.50 1255.00 – 5526.50 + 3458.00 +15 OGS 495.00 904.50 + + – – – – –16 OGS 495.00 939.00 912.50 1356.00 – 6242.50 + + +18 OGS 596.00 1132.00 1099.00 1634.00 – 7139.50 + + +20 OGS 724.00 1374.00 1987.00 1987.00 – 8301.00 + + +22 OGS 752.00 1425.50 1987.00 2088.50 – + + + +24 OGS 810.00 1538.00 1492.00 2219.00 – 13844.00 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-20
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
FOR STYLE W07/W77 AGS GASkETS
Nom. Size AGS Gasket Flush-SealInches Grade “E” Grade “T” or “L”
14 $528.50 $745.5016 568.50 802.5018 686.00 959.0020 831.50 1112.5024 932.00 1228.0026 + +28 + +30 + +32 + +36 + +40 + +42 + +46 + +48 + +54 + +56 + +60 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
SILICONE GASkETS FOR STYLES 07, HP-70, 75, 77, 78, 791 AND 997 COUPLINGS
Nom. Size Inches
Grade “L” Silicone
Flush-Seal Grade “L” Silicone
C\v $290.50 +1 290.50 $510.50
1Z\v 328.00 510.50
1Z\x 344.00 510.502 351.00 518.00
2Z\x 366.00 532.503 388.50 539.00
3Z\x 429.50 –4 439.50 548.50
4Z\x + +5 446.00 557.506 449.00 559.508 455.00 567.50
10 459.50 593.5012 526.50 655.0014 536.00 667.0015 + –16 592.00 740.5018 979.50 1222.0020 1048.00 1309.0022 1084.50 –24 1084.50 1355.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
1-21
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Gaskets STANDARD “E” OR “T” GASkETS FOR STYLE 750
Nom. Size Inches Price Each
Run x Brch. Grade “E” or “T”2 x 1 $78.50
1Z\x 87.002Z\x x 2 68.00
3 x 2 87.002Z\x 87.00
4 x 2 104.002Z\x 102.00
3 102.005 x 4 121.006 x 4 149.00
5 136.008 x 6 183.00
10 x 8 227.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
M-2 GASkETS FOR STYLES 07, HP-70, 77 AND 997 COUPLINGS
Nominal Size Inches
Grade “M-2” Gaskets
1 +1Z\v +
1Z\x +2 +
2Z\x +3 +4 +5 +6 +8 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Gaskets
NOTE: For pricing couplings complete with any special gaskets, contact Victaulic. Gasket guidelines can be found in the latest Victaulic Gasket Selection Guide (publica-tion 05.01). This information is general in scope and Victaulic should be consulted for guidelines when a question arises.
STANDARD “E” OR “T” GASkET FOR STYLE 72
Nom. Size Inches Price Each
Run x Brch. Style 721Z\x x Z\x $119.50
C\v 119.501 119.50
2 x Z\x 121.00C\v 121.001 121.00
2Z\x x Z\x 195.00C\v 195.001 195.00
1Z\v 195.001Z\x 195.00
Nom. Size Inches Price Each
Run x Brch. Style 723 x C\v $201.50
1 201.501Z\v 201.501Z\x 201.50
4 x C\v 235.501 235.50
1Z\x 540.502 540.50
6 x 1 738.501Z\x 738.50
2 738.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C1-22
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Victaulic Lubricant
Victaulic Lubricant LUBRICANT Price EachPACK With 12 Tubes – 4 Fluid Ounces Each $450.50
CONTAINER One Quart (32 Fluid Ounces) – Container 160.50
To ensure easy assembly and service of all your Victaulic installations, be sure to include plenty of Victaulic Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of units sold.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: Victaulic lubricant is not recommended for use with HDPE pipe.
LUBRICANT USAGE GUIDESize of Gasket Inches
Number of Gaskets Size of Gasket Inches
Number of Gaskets Size of Gasket Inches
Number of Gaskets
Per Tube Per Quart Per Tube Per Quart Per Tube Per Quart2 55 400 8 13 100 16 6 453 36 270 10 11 80 18 5 354 26 200 12 8 60 20 4 306 17 125 14 7 50 24 3 20
Flange Gaskets – Styles 741, W741, 743
Flange Gaskets
FOR STYLE 741, W741 AND 743 VIC-FLANGE ADAPTERS
FOR STYLE 741, W741 AND 743 VIC-FLANGE ADAPTERS
Flange Size Standard Gaskets Price Each
Special Gaskets Price Each
Inches
Style 741/743 Grade “E” or “T”
Gasket OnlyStyle 741/743
Grade “L” Silicone
Style 741 Grade “O”
Fluoroelastomer
Style 741/743 Grade “A” White
Nitrile Gasket Only
2 $49.00 $200.50 $651.50 $309.002Z\x 53.00 266.00 721.00 309.00
3 58.00 338.50 818.50 617.504 75.00 409.00 884.00 926.005 91.00 580.50 988.00 1234.506 117.50 587.00 1102.50 1541.508 147.00 611.00 1237.50 1849.50
10 182.50 626.00 2435.50 2157.5012 210.00 659.50 2967.00 +
14 * 386.00 829.50 3156.50 +16 * 404.00 880.50 3852.00 +18 * 458.00 932.50 – +20 * 580.50 992.50 4895.50 +24 * 704.00 1095.00 – +
* Flange gaskets supplied for Style W741 AGS Flange
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Swing Handle Wrench
Swing Handle Wrench SWING HANDLE WRENCH
SizePart Number Purchase
List Price EachZZ\zn” and M\,” Sockets for C\,” and Z\x” Hvy Hex Nuts P000000001 $91.50M\,” and 1Z\zn” Sockets for Z\x” and B\,” Hvy Hex Nuts P000000002 96.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
# Tool discount applies.
1-23
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Plated Trackhead Bolts and Nuts
Plated Trackhead Bolts and Nuts
PLATED TRACkHEAD BOLTS AND NUTS
Bolt and Nut Size
Inches Price EachC\, x 2 $15.00Z\x x 2Z\x 18.00
2C\v 18.503 20.00
3Z\v 20.00B\, x 2C\v 18.50
3Z\v 25.003Z\x 25.00
4 28.504Z\v -
C\v x 4Z\v 36.505 54.50
5C\v 756.50M\, x 5 48.00
5Z\x 51.006Z\x 79.00
Bolt and Nut Size
Inches Price Each1 x 3Z\x $58.50
5 102.005Z\x 87.00
6 75.006Z\x 71.50
1Z\, x 4 164.005Z\x 164.00
1Z\v x 3Z\x 178.005Z\x 194.00
1C\, x 5C\v 230.001Z\x x 4Z\x 321.00
5C\v 243.001C\v x 6 569.001M\, x 6 778.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Installation Ready™ Bolts and Nuts
Installation-Ready™ Bolts and Nuts
NYLON COATED BOLTS AND NUTS FOR STYLES 107H, 177 AND 607 INSTALLATION-READY COUPLINGS
Bolt and Nut Size
Inches Price EachC\, x 2Z\x $35.50Z\x x 3 34.00Z\x x 3Z\v +B\, x 3Z\v 36.00
4 41.50C\v x 5 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Go-No-Go Tape
Go-No-Go Tape Tool Model Part Number Purchase PricePT-100-A Go/No-Go Grooved Pipe Diameter Tape Each RW75-100-MCH $74.50Box of 6 RW75-100-KIT 433.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
# Tool discount applies.
Elbows –No. 10 – 90°, No. 11 - 45°
VICTAULIC.COM PL2016-GENERAL-C1-24
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Grooved IPS Pipe FittingsWhen ordering ALWAYS verify with Victaulic Customer Service that fitting dimensions meet installation requirements.
Elbows 1DRefer to publication 07.01
No. 10
No. 11
ELBOWS – 90° ELBOW OR 45° ELBOW
Nom. Size 90° Elbow No. 10 45° Elbow No. 11
Inches
Aprx. Wgt. Ea.
Lbs.C - E
Inches
Price Each Aprx. Wgt. Ea.
Lbs.C - E
Inches
Price Each
Painted Galv. Painted Galv.C\v 0.5 2.25 $128.50 $166.00 0.5 1.50 $128.50 $166.001 0.6 2.25 128.50 166.00 0.6 1.75 128.50 166.00
1Z\v 1.0 2.75 128.50 166.00 0.9 1.75 128.50 166.00
1Z\x 1.2 2.75 128.50 166.00 0.9 1.75 128.50 166.002 1.8 3.25 128.50 166.00 1.3 2.00 128.50 166.00
2Z\x 3.2 3.75 128.50 172.50 2.2 2.25 128.50 166.003 4.5 4.25 169.50 235.00 3.1 2.50 169.50 220.00
3Z\x 5.6 4.50 241.00 323.00 4.3 2.75 241.00 323.004 7.1 5.00 262.00 366.50 5.6 3.00 262.00 341.005 11.7 5.50 493.00 660.00 8.3 3.25 493.00 633.006 17.2 6.50 639.00 890.00 10.8 3.50 639.00 829.008 29.9 7.75 1090.00 1553.50 20.4 4.25 1011.50 1270.00
10 63.3 9.00 1694.00 2414.00 37.5 4.75 1363.00 1821.5012 74.0 10.00 2590.50 4070.00 66.7 5.25 1936.00 2521.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Cut grooved fittings are non-cancellable and non-returnable.
No. W10 – 90°, No. W11 – 45°
AGS ElbowsRefer to publication 20.05
VICT
AULI
C
No.W10
No. W10
VICT
AULI
CN
o.W
11
No. W11
AGS ELBOWS – 90° ELBOW OR 45° ELBOW
Nom. Size 90° Elbow No. W10 45° Elbow No. W11
Inches
Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each
Painted Galv. Painted Galv.14 150.8 14.00 $2248.50 $3224.00 63.0 5.80 $1222.50 $1658.5016 184.3 16.00 3063.50 4543.00 93.8 6.63 1809.00 2533.5018 272.3 18.00 4258.00 6458.00 129.0 7.46 2528.00 3583.0020 312.0 20.00 5581.00 8187.50 165.3 8.28 3172.50 4590.0024 559.8 24.00 8677.00 12907.00 246.0 9.94 4884.50 7155.5026 586.0 26.00 + + 278.0 10.80 + +28 680.0 28.00 + + 325.0 11.60 + +30 887.0 30.00 + + 420.0 12.40 + +32 1012.0 32.00 + + 483.0 13.25 + +36 1283.0 36.00 + + 617.0 14.91 + +40 1907.0 40.00 + + 915.0 16.57 + +42 2169.0 42.00 + + 1042.0 17.93 + +46 1527.0 (sw) 46.00 + + 761.0 (sw) 19.10 + +48 1661.0 (sw) 48.00 + + 828.0 (sw) 19.90 + +54 2094.0 (sw) 54.00 + + 1042.0 (sw) 22.40 + +56 2252.0 (sw) 56.00 + + 1120.0 (sw) 23.20 + +60 2583.0 (sw) 60.00 + + 1285.0 (sw) 24.90 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
These fittings are roll grooved to AGS dimensions for use with AGS couplings Styles W77 and W07. They cannot be used with original grooved pipe or couplings. Contact Victaulic for original cut grooved fittings 14 to 24” to be used with non-AGS Style 77 couplings.
+ Quoted on application. Contact Victaulic for pricing and availability.
1-25
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. 12 – 22Z\x°, No. 13 – 11Z\v°
ElbowsRefer to publication 07.01
No. 12
No. 13
ELBOWS – 22Z\x° ELBOW OR 11Z\v° ELBOW
Nom. Size 22Z\x° Elbow No. 12 11Z\v° Elbow No. 13
Inches
Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each
Painted Galv. Painted Galv.1 0.6 ‡ 3.25 $142.00 $172.00 0.3 (sw) 1.38 $142.00 +
1Z\v 0.8 1.75 149.50 183.50 0.5 (sw) 1.38 149.50 $183.50
1Z\x 0.8 1.75 149.50 183.50 0.5 (sw) 1.38 149.50 183.502 1.4 ‡ 3.75 151.00 183.50 1.0 1.38 149.50 183.50
2Z\x 2.3 ‡ 4.00 149.50 183.50 1.5 1.50 149.50 183.503 3.1 ‡ 4.50 159.00 210.50 2.1 1.50 159.00 200.00
3Z\x 4.0 (sw) 2.50 + + 2.7 (sw) 1.75 + +4 5.6 2.88 295.50 387.50 3.6 1.75 292.00 363.505 7.8 (sw) 2.88 616.00 773.50 5.0 (sw) 2.00 601.00 727.506 12.2 ‡ 6.25 730.00 941.50 7.0 2.00 706.50 864.508 20.0 ‡ 7.75 1492.50 1877.50 10.1 2.00 1306.50 1576.50
10 30.0 (sw) 4.38 2013.00 2551.50 11.8 2.13 1541.50 1851.0012 40.0 (sw) 4.88 2150.50 2801.00 29.3 2.25 1778.50 2281.00
Cut grooved fittings are non-cancellable and non-returnable.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
‡ Gooseneck design.
No. W12 – AGS 22Z\x°, No. W13 – AGS 11Z\v°
AGS ElbowsRefer to publication 20.05
No. W12
No. W13
AGS ELBOWS – 22Z\x° ELBOW OR 11Z\v° ELBOW
Nom. Size 22Z\x° Elbow No. W12 11Z\v° Elbow No. W13
Inches
Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each
Painted Galv. Painted Galv.14 46.0 5.00 $1847.50 $2336.50 32.0 3.50 $1872.50 $2297.0016 58.0 5.00 2286.00 2898.00 42.0 4.00 2317.50 2857.5018 65.0 5.50 2605.50 3297.50 53.2 4.50 2651.00 3299.5020 78.6 6.00 2916.00 3724.00 65.0 5.00 2957.00 3716.0024 140.0 7.00 4426.00 5772.00 60.0 6.00 4633.50 5910.0026 122.0 6.80 + + 92.0 5.00 + +28 136.0 7.00 + + 104.0 5.30 + +30 151.0 7.30 + + 112.0 5.30 + +32 167.0 7.50 + + 124.0 5.50 + +36 194.0 7.80 + + 140.0 5.50 + +40 322.0 8.80 + + 234.0 6.30 + +42 348.0 9.00 + + 246.0 6.30 + +46 392.0 9.30 + + 280.0 6.50 + +48 420.0 9.50 + + 303.0 6.80 + +54 592.0 12.00 + + 437.0 8.80 + +56 627.0 12.30 + + 465.0 9.00 + +60 698.0 12.80 + + 512.0 9.30 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-26
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. 100 and No. 110 1Z\x D Long Radius Elbows
Long Radius – 1Z\x D ElbowsRefer to publication 07.01
No. 100
No. 110
LONG RADIUS – 90° LONG RADIUS ELBOW OR 45° LONG RADIUS ELBOW
Nom. Size 90° Long Rad. Elbow No. 100 * 45° Long Rad. Elbow No. 110 *
Inches
Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each
Painted Galv. Painted Galv.2 2.5 4.38 $186.00 $232.50 1.8 2.75 $187.00 $225.50
2Z\x 3.4 5.13 271.00 331.50 2.8 3.00 540.00 649.503 6.0 5.88 271.00 357.50 4.9 3.38 254.50 333.504 12.3 7.50 418.50 578.50 7.3 4.00 319.50 429.005 18.0 (sw) 9.25 1405.50 1725.00 14.8 (sw) 4.88 1328.50 1690.506 30.4 10.75 1043.50 1439.00 17.4 5.50 702.00 953.008 66.0 14.25 2112.50 2943.50 36.0 7.25 2031.00 2592.50
10 107.0 15.00 2883.50 3933.50 57.0 6.25 2620.00 3364.5012 156.0 18.00 4219.50 6006.50 90.0 7.50 3120.00 4086.0014 164.0 21.00 7392.00 9552.50 82.0 8.75 4921.00 6353.5016 210.0 24.00 7880.50 10508.50 100.0 10.00 6209.00 7686.5018 273.0 27.00 10542.00 15574.50 135.0 11.25 7999.50 10043.5020 343.0 30.00 13824.50 22346.50 174.0 12.50 9029.00 11811.0024 516.0 36.00 23393.50 30339.50 251.0 15.00 14158.50 17694.00
Cut grooved fittings are non-cancellable and non-returnable.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* See pages 58 – 61 for long radius 3-D, 5-D and 6-D bends.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
No. W100 and W110 1Z\x D AGS Long Radius Elbow
AGS Long Radius – 1Z\x D Elbows
Refer to publication 20.05
VICT
AULI
C
No.W10
0
No. W100
VICT
AULI
CN
o.W
110
No. W110
AGS LONG RADIUS – 90° LONG RADIUS ELBOW OR 45° LONG RADIUS ELBOW
Nom. Size 90° Long Rad. Elbow No. W100 45° Long Rad. Elbow No. W110
Inches
Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each
Painted Galv. Painted Galv.14 210.4 21.00 $5370.50 $6942.00 105.9 8.75 $3575.50 $4616.0016 274.8 24.00 5726.50 7637.00 137,4 10.00 4512.00 5585.0018 383.9 27.00 7660.50 11318.00 191.6 11.25 5812.50 7297.5020 474.3 30.00 10046.00 16239.50 237.1 12.50 6561.00 8583.0024 746.6 36.00 17000.50 22048.50 373.3 15.00 10289.00 12858.0026 877.0 39.00 + + 421.0 16.00 + +28 1019.0 42.00 + + 491.0 17.30 + +30 1268.0 45.00 + + 612.0 18.50 + +32 1517.0 48.00 + + 733.0 19.80 + +36 1925.0 54.00 + + 935.0 22.30 + +40 2883.0 60.00 + + 1397.0 24.90 + +42 3260.0 63.00 + + 1583.0 26.00 + +46 3260.0 (sw) 69.00 + + 1210.0 (sw) 286.00 + +48 2471.0 (sw) 72.00 + + 1314.0 (sw) 296.00 + +54 3120.0 (sw) 81.00 + + 1648.0 (sw) 336.00 + +56 3355.0 (sw) 84.00 + + 1769.0 (sw) 346.00 + +60 3850.0 (sw) 90.00 + + 2023.0 (sw) 376.00 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
+ Quoted on application. Contact Victaulic for pricing and availability.
1-27
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. 890 and 890H – Long Radius 90°, No. 811 and 811H – 45°
Long Radius ElbowsRefer to publication 100.01
No. 890 and No. 890H
No. 811 and No. 811H
ELBOWS – LONG RADIUS 90° ELBOW OR 45° ELBOW
Nom. Size Long Radius 90° Elbow 45° Elbow
Inches
No. 890 Sch. 40
No. 890H Sch. 80
No. 811 Sch. 40
No. 811H Sch. 80
Aprx. Wgt. Ea.
LbsPrice Each
Aprx. Wgt. Ea.
LbsPrice Each
Aprx. Wgt. Ea.
LbsPrice Each
Aprx. Wgt. Ea.
LbsPrice Each
2 3.2 $342.00 4.5 $445.00 2.4 $297.00 3.5 $386.502Z\x 5.7 342.00 7.8 445.00 4.2 297.00 5.8 386.50
3 8.1 342.00 11.3 445.00 5.8 297.00 8.1 386.504 13.8 508.00 19.7 660.00 9.4 361.00 13.4 469.506 32.7 1442.50 50.4 1802.50 20.4 1035.00 31.5 1293.508 62.1 3471.00 96.4 4306.00 37.6 1798.50 58.3 2247.00
No. R-10G and No. R-10F Reducing Base Support Elbow
Reducing Base Support ElbowsRefer to publication 07.01
No. R-10G Grooved x Grooved
No. R-10F Grooved x Flanged
REDUCING BASE SUPPORT ELBOWS – GROOVED X GROOVED OR GROOVED X FLANGED
Nom. Size Grooved x Grooved No. R-10G Grooved x Flanged No. R-10F
Inches Inlet x Outlet
Aprx. Wgt. Each
Lbs
Price Each Aprx. Wgt. Each
Lbs
Price Each
Painted Galv. Painted Galv.6 x 4 19.0 $1295.00 $1637.00 33.0 $1763.00 $2291.506 x 5 23.0 1334.00 1716.50 38.0 1841.00 2451.008 x 6 33.0 2231.50 2823.50 52.0 2857.00 3691.50
10 x 8 61.0 3990.50 5046.50 88.0 4705.50 6254.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C1-28
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. 10-DR Drain Elbow
Drain Elbow
NO. 10-DRRefer to publication 10.05
USA
DRAIN ELBOW
Nom. SizeAprx
Wgt. Ea. Price EachInches Lbs Painted Galv.
2Z\x 5.2 $297.00 $372.003 5.3 332.50 413.504 8.8 410.50 528.006 18.7 736.50 969.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 20 Tee, No. 29M Tee with Threaded Branch
TeesRefer to publication 07.01
No. 20
No. 29M
TEES – TEE OR TEE WITH THREADED BRANCH
Nom. SizeAprx.
Wgt. Ea.Tee
No. 20
Tee with Male Threaded
Branch No. 29M
Inches LbsPrice Each Price Each
Painted Galv. Painted Galv.C\v 0.6 $241.00 $316.50 + +1 1.0 241.00 316.50 – –
1Z\v 1.5 241.00 316.50 $313.00 $396.00
1Z\x 2.0 241.00 316.50 313.00 396.002 3.0 241.00 316.50 313.00 348.00
2Z\x 4.3 241.00 316.50 – –3 6.8 293.00 386.50 – –
3Z\x 7.9 (sw) 402.50 511.50 + +4 11.3 408.00 577.50 1688.50 2016.50
4Z\x 15.0 (sw) + + – –5 17.8 785.00 1045.50 3037.00 +6 25.7 1082.00 1470.50 2970.00 3363.508 47.6 1812.00 2477.50 + +
10 99.0 1810.50 2931.00 + +12 133.0 2461.00 4189.50 + +
Cut grooved fittings are non-cancellable and non-returnable.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
1-29
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. W20 AGS Tee
AGS TeesRefer to publication 20.05
VICTAULICNo.W20
No. W20
AGS STANDARD TEE
Nom. SizeAprx
Wgt. Ea. Tee - No. W20
Inches LbsPrice Each
Painted Galv.14 102.0 $2235.00 $3473.5016 123.5 2752.50 4309.5018 281.0 4397.50 7144.5020 350.0 5787.50 8521.0024 503.7 8554.50 10626.0026 634.0 + +28 741.0 + +30 855.0 + +32 1190.0 + +36 1608.0 + +38 1496.0 + +40 1968.0 + +42 2891.0 + +46 2620.0 + +48 3805.0 + +54 3656.0 + +56 3961.0 + +60 4325.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 820 and No. 820H Tee
TeeRefer to publication 100.01
No. 820 and No. 820H
NO. 820 STANDARD TEE
NominalNo. 820 Sch. 40
No. 820H Sch. 80
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each2 5.6 $235.00 7.9 $305.00
2Z\x 9.6 235.00 13.1 305.003 12.2 320.50 16.9 416.504 20.1 487.50 28.6 633.006 46.1 1281.50 71.3 1601.508 77.9 2806.50 121.0 3506.50
VICTAULIC.COM PL2016-GENERAL-C1-30
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. 35 Cross, No. 33 True Y
Cross and WyeRefer to publication 07.01
No. 35
No. 33
CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE Y
Nom. SizeSteel Cross (sw)
No. 35Steel 90 True Wye (sw)
No. 33
Inches
Aprx Wgt. Ea.
Lbs
Price Each Aprx Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.C\v 0.9 $652.50 $681.00 0.7 + +1 1.3 652.50 681.00 1.1 $359.00 $415.50
1Z\v 2.1 652.50 771.50 1.5 366.00 481.50
1Z\x 2.5 1019.50 1213.00 1.8 426.00 503.002 3.8 212.50 275.00 2.5 426.00 503.00
2Z\x 6.1 605.00 737.50 4.3 575.00 689.503 10.5 468.50 625.00 6.1 731.50 883.50
3Z\x 11.5 1803.50 2111.50 9.6 + +4 15.8 725.50 962.50 9.8 1057.00 1289.505 20.0 1773.00 1951.50 15.0 1637.00 1988.506 28.0 2176.50 2705.50 22.3 1975.50 2445.008 48.0 3785.50 4697.50 36.0 2594.50 3278.50
10 121.5 4740.50 6578.00 69.9 3405.50 4512.0012 110.0 6933.00 8213.00 80.0 4312.00 5578.00
Cut grooved fittings are non-cancellable and non-returnable.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. W35 AGS Cross, No. W33 AGS True Y
AGS Cross and Wye
Refer to publication 20.05
VICTAULICNo.W35
No. W35
VICT
AULI
C
No.W33
No. W33
AGS CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE Y
Nom. SizeSteel Cross (sw)
No. W35Steel 90 True Wye (sw)
No. W33
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.14 168.0 $5032.00 $6297.00 114.0 $3561.50 $4420.0016 216.0 7218.00 8844.00 144.0 4772.00 5856.5018 278.0 9412.00 11505.50 185.0 6246.00 7638.5020 348.0 11138.00 13758.00 216.0 8154.50 9780.5024 488.0 16654.50 20327.50 343.0 15092.50 17675.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
1-31
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No(s). 40, 42, and 43 Adapter Nipples
Roll Grooved Adapter Nipples †
Same prices apply for: No. 40 Grooved x Threaded No. 42 Grooved x Beveled No. 43 Grooved x GroovedRefer to publication 07.01
No. 40
No. 42
No. 43
ADAPTER NIPPLES – GROOVED X THREADED, GROOVED X BEVELED, OR GROOVED X GROOVED
Nom. Size
Aprx. Wgt. Ea. Price Per Length Inches
Inches Lbs3 4 5 6 8
Black Galv. Black Galv. Black Galv. Black Galv. Black Galv.C\v 0.1 $23.00 $32.50 $27.00* $37.00* +* +* $35.00* +* +* +*1 0.1 22.00 26.00 26.00* 30.50* +* +* 32.50* $40.00* $49.50* +*
1Z\v 0.2 +* +* 38.00 47.00 +* +* 41.00* +* +* +*
1Z\x 0.2 +* +* 38.00 47.00 $44.00* $50.50* 49.00* 60.50* 74.00* $89.00*2 0.3 38.00* 50.00* 41.00 50.50 56.50* 64.00* 50.00* 65.00* 97.50* +*
2Z\x 0.5 +* +* 64.00 83.00 131.50* +* 78.50* 104.00* 104.00* +*3 0.6 +* +* 74.00 96.00 154.00* +* 86.00* 118.00* 161.50* 206.00*
3Z\x 0.8 +* +* 145.00* 217.00* +* +* +* +* +* +*4 0.9 +* +* 96.00* 126.50* 136.00* 177.00* 125.00 170.50 198.50* 260.50*5 1.2 +* +* +* +* 418.00* +* 397.00 475.50 403.50* 492.00*6 1.6 +* +* +* +* 446.00* +* 451.00 550.00 529.50* 656.50*8 2.5 +* +* +* +* +* +* 611.50 + 666.00* +*
10 3.4 +* +* +* +* +* +* 877.50* +* 930.00 +12 * 4.1 +* +* +* +* +* +* 1004.00* +* 1012.50 1351.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Other sizes available upon request. Contact Victaulic for details.
+ Quoted on application. Contact Victaulic for pricing and availability.
Unless otherwise specified, Adapter Nipples for nominal pipe sizes 6” and smaller are made from Schedule 40 pipe; for nominal sizes 8” and larger, from Schedule 30 pipe. Special lengths not shown, heavier wall thickness are priced on application. * These sizes available only in No. 42 grooved x beveled and No. 43 grooved x grooved.
† For cut groove adapter nipples contact Victaulic for pricing and availability.
No(s). W42, W43 and W49 AGS Adapter Nipples
AGS Adapter Nipples
Same prices apply for: No. W42 AGS Grooved x Beveled No. W43 AGS Grooved x AGS Grooved No. W49 AGS Grooved x GroovedRefer to publication 20.05
No. W42
No. W43
No. W49
AGS ADAPTER NIPPLES – NO. W42 AGS GROOVED X BEVELED, NO. W43 AGS GROOVED X AGS GROOVED, OR NO. W49 AGS GROOVED X ORIGINAL GROOVED
Nom. Size Inches
Length Inches *
Aprx. Wgt. Ea.
Lbs Price Each14 8 36.0 $860.5016 8 42.0 1223.5018 8 47.0 1309.5020 8 52.0 1452.0024 8 63.0 2139.0026 12 104.0 +28 12 112.0 +30 12 120.0 +32 12 128.0 +36 12 190.0 +40 12 211.0 +42 12 222.0 +46 12 243.0 +48 12 254.0 +
NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
Please specify nipple style number when ordering. Unless otherwise specified, Adapter Nipples are constructed using standard wall pipe. * Other lengths available. Contact Victaulic for details. NOTE: For original roll grooved 14 – 24” adapters please contact your local Victaulic sales representative.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-32
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. 80 Female Threaded Adapter
Female Threaded AdapterRefer to publication 07.01
No. 80
FEMALE THREADED ADAPTER
Nom. SizeAprx.
Wgt. EachNo. 80
Price EachInches Lbs Painted Galv.
C\v 1.0 $243.00 $285.501 1.0 243.00 285.50
1Z\v 1.5 (sw) 243.00 285.50
1Z\x 1.5 (sw) 243.00 285.502 1.4 243.00 285.50
2Z\x 1.5 243.00 285.503 2.9 243.00 285.504 4.5 291.50 363.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
No(s). 18 and 19 Adapter Elbows
Adapter ElbowsRefer to publication 07.01
No. 18
No. 19
ADAPTER ELBOWS – 90° ADAPTER ELBOW OR 45° ADAPTER ELBOW
Nom. Size 90° Adapter Elbow No. 18 45° Adapter Elbow No. 19
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.C\v 0.5 $194.00 $227.00 0.5 $123.50 $161.501 0.5 194.00 227.00 0.6 – –
1Z\v 0.9 203.00 239.00 0.6 – –
1Z\x 1.1 247.50 293.00 0.9 305.00 354.502 2.5 269.50 318.00 1.9 – –
2Z\x 3.0 287.50 354.00 2.3 361.00 430.003 5.8 419.50 517.50 5.0 519.50 602.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
1-33
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. 25 Grooved Reducing Tee
Reducing TeeRefer to publication 07.01
No. 25
REDUCING TEE
Size Reducing Tee No. 25Inches Aprx.
Wgt. Each Lbs
Price Each
Run x Branch Painted Galv.1 x 1 x C\v (sw) 1.0 $310.00 $372.50
1Z\v x 1Z\v x 1 (sw) 1.3 310.00 372.50
1Z\x x 1Z\x x C\v (sw) 1.5 310.00 372.501 (sw) 1.5 310.00 372.50
1Z\v (sw) 1.7 310.00 372.502 x 2 x C\v 2.5 314.00 383.50
1 2.7 314.00 383.501Z\v (sw) 1.8 314.00 386.50
1Z\x 3.0 314.00 386.50
2Z\x x 2Z\x x C\v (sw) 3.9 512.00 630.001 3.8 316.50 389.00
1Z\v 4.2 512.00 625.00
1Z\x 3.9 512.00 620.502 4.5 521.50 624.50
3 x 3 x C\v (sw) 5.7 288.50 376.501 6.1 341.00 446.50
1Z\v 8.0 826.50 964.00
1Z\x 6.5 346.50 450.002 6.2 341.00 448.00
2Z\x 6.4 346.50 446.004 x 4 x C\v (sw) 8.0 998.50 1308.00
1 7.8 363.50 476.001Z\v (sw) 9.6 998.00 1374.00
1Z\x 10.2 393.00 540.002 11.2 393.00 540.00
2Z\x 11.4 488.50 650.503 11.6 513.00 678.50
5 x 5 x 1 (sw) 14.0 763.00 987.501Z\x (sw) 14.3 763.00 987.50
2 (sw) 14.5 800.00 1034.502Z\x 15.2 763.00 1003.50
3 16.6 800.00 1053.504 16.7 817.00 1066.50
6 x 6 x 1 (sw) 23.0 1070.00 1402.501Z\x (sw) 24.0 1070.00 1402.50
2 21.6 1028.00 1346.502Z\x 21.4 1028.00 1342.00
3 26.5 1028.00 1388.504 25.0 1049.00 1398.505 23.2 1049.00 1381.50
8 x 8 x 1Z\x (sw) 33.0 1485.50 1800.502 (sw) 33.5 1742.50 2305.00
2Z\x (sw) 39.0 1742.50 2306.003 (sw) 33.6 1742.50 2306.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2016-GENERAL-C1-34
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Reducing TeeRefer to publication 07.01
No. 25
Size Reducing Tee No. 25Inches Aprx.
Wgt. Each Lbs
Price Each
Run x Branch Painted Galv.8 x 8 x 4 41.8 $2077.00 $2702.00
5 (sw) 34.0 2087.50 2645.506 42.3 2077.00 2705.50
10 x 10 x 1Z\x 62.0 2211.50 3030.502 (sw) 62.0 2786.50 3819.50
2Z\x (sw) 62.4 2786.50 3819.503 (sw) 60.0 2786.50 3928.004 (sw) 61.0 2697.50 3760.005 (sw) 52.0 2468.00 3229.006 (sw) 59.0 2786.50 3689.008 (sw) 64.7 2786.50 3712.00
12 x 12 x 1 (sw) 77.0 2476.00 3622.002 (sw) 80.0 2476.00 3488.00
2Z\x (sw) 78.0 2476.00 3622.003 (sw) 82.0 3446.00 4853.004 (sw) 80.0 3446.00 4849.005 (sw) 75.0 2638.00 3492.006 (sw) 75.0 3446.00 4534.008 (sw) 80.0 3446.00 4718.50
10 (sw) 84.0 3445.00 4700.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
1-35
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. W25 AGS Grooved Reducing Tee
AGS Reducing TeeRefer to publication 20.05
VICTAULICNo.W25
No. W25
AGS REDUCING TEE *
Size AGS Reducing Tee No. W25Inches Aprx.
Wgt. Each Lbs
Price Each
Run x Branch Painted Galv.14 x 14 x 6 142.0 $2655.50 $3257.00
8 143.0 2655.50 3713.5010 144.0 2693.50 3775.0012 147.0 3107.50 4340.50
16 x 16 x 6 176.0 2901.00 3954.008 185.0 2901.00 4185.50
10 195.0 3167.00 4479.5012 204.0 3204.00 4486.0014 210.0 3759.00 5339.50
18 x 18 x 8 231.0 4892.50 6610.5010 244.0 4892.50 6117.0012 254.0 5143.50 7315.0014 262.0 5456.00 7746.0016 269.0 5666.50 7975.50
20 x 20 x 8 282.0 5444.00 7453.0010 295.0 5444.00 7550.0012 308.0 5729.00 8222.0014 316.0 5737.50 7793.0016 329.0 5745.50 8222.5018 342.0 6728.50 8502.00
24 x 24 x 8 381.0 8395.50 11722.5010 394.0 8395.50 12051.0012 409.0 8577.00 12317.5014 419.0 8502.50 10476.0016 433.0 8856.00 10904.5018 453.0 9209.00 11516.0020 473.0 10137.50 14298.00
26 x 26 x 14 536.0 + +16 545.0 + +18 562.0 + +20 582.0 + +22 600.0 + +24 617.0 + +
28 x 28 x 14 605.0 + +16 624.0 + +18 644.0 + +20 665.0 + +22 685.0 + +24 705.0 + +26 717.0 + +
30 x 30 x 14 689.0 + +16 707.0 + +18 728.0 + +20 750.0 + +22 774.0 + +24 796.0 + +26 820.0 + +28 838.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Victaulic fittings listed are made of segmentally welded steel.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-36
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
AGS Reducing TeeRefer to publication 20.05
VICTAULICNo.W25
No. W25
AGS REDUCING TEE *
Size AGS Reducing Tee No. W25Inches Aprx.
Wgt. Each Lbs
Price Each
Run x Branch Painted Galv.32 x 32 x 16 1183.0 + +
18 1209.0 + +20 1239.0 + +22 1272.0 + +24 1303.0 + +26 1334.0 + +28 1358.0 + +30 1385.0 + +
36 x 36 x 18 1360.0 + +20 1369.0 + +22 1371.0 + +24 1418.0 + +26 1442.0 + +28 1477.0 + +30 1510.0 + +32 1543.0 + +
38 x 38 x 18 1262.0 + +20 1278.0 + +22 1292.0 + +24 1314.0 + +26 1340.0 + +28 1367.0 + +30 1393.0 + +32 1420.0 + +36 1473.0 + +
40 x 40 x 20 1475.0 + +22 1505.0 + +24 1543.0 + +26 1594.0 + +28 1631.0 + +30 1682.0 + +32 1768.0 + +36 1852.0 + +38 1929.0 + +
42 x 42 x 20 1875.0 + +22 1940.0 + +24 2017.0 + +26 2105.0 + +28 2105.0 + +30 2202.0 + +32 2202.0 + +36 2304.0 + +38 1375.0 + +40 1761.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Victaulic fittings listed are made of segmentally welded steel.
+ Quoted on application. Contact Victaulic for pricing and availability.
1-37
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
AGS Reducing TeeRefer to publication 20.05
VICTAULICNo.W25
No. W25
AGS REDUCING TEE *
Size AGS Reducing Tee No. W25Inches Aprx.
Wgt. Each Lbs
Price Each
Run x Branch Painted Galv.46 x 46 x 22 1843.0 + +
24 1865.0 + +26 1880.0 + +28 1900.0 + +30 1927.0 + +32 1953.0 + +36 2006.0 + +38 2033.0 + +40 2059.0 + +42 2086.0 + +
48 x 48 x 24 2503.0 + +26 2525.0 + +28 2540.0 + +30 2579.0 + +32 2579.0 + +36 2652.0 + +38 2729.0 + +40 2804.0 + +42 2804.0 + +46 2881.0 + +
54 x 54 x 26 2805.0 + +28 2805.0 + +30 2821.0 + +32 2835.0 + +36 2853.0 + +38 2879.0 + +40 2906.0 + +42 2932.0 + +46 2985.0 + +48 3012.0 + +
56 x 56 x 28 3059.0 + +30 3075.0 + +32 3087.0 + +36 3111.0 + +38 3137.0 + +40 3164.0 + +42 3190.0 + +46 3243.0 + +48 3269.0 + +54 3349.0 + +
60 x 60 x 30 3269.0 + +32 3380.0 + +36 3345.0 + +38 3386.0 + +40 3420.0 + +42 3459.0 + +46 3512.0 + +48 3538.0 + +54 3618.0 + +56 3644.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Victaulic fittings listed are made of segmentally welded steel.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-38
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. 825 and No. 825H Reducing Tee
Reducing TeeRefer to publication 100.01
No. 825 and No. 825H
NO. 825 REDUCING TEE
Nom. SizeNo. 825 Sch. 40
No. 825H Sch. 80
Inches Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price EachRun x Branch2Z\x x 2Z\x x 2 8.7 $478.00 11.9 $602.50
3 x 3 x 2 11.1 426.00 15.4 532.502Z\x 11.8 426.00 16.4 532.50
4 x 4 x 2 16.9 574.00 24.1 717.002Z\x 17.6 574.00 25.0 717.00
3 18.2 574.00 25.9 717.006 x 6 x 2Z\x 39.7 1347.50 61.2 1684.50
3 40.4 1347.50 62.3 1684.504 41.7 1347.50 74.3 1684.50
8 x 8 x 4 69.9 2806.50 108.6 3506.506 75.1 2806.50 116.6 3506.50
1-39
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. 29T Threaded Reducing Tee
Reducing Tee with Threaded BranchRefer to publication 07.01
No. 29T
REDUCING TEE WITH THREADED BRANCH
Size Reducing Tee No. 29T with Threaded BranchInches Aprx. Wgt. Each
LbsPrice Each
Run x Branch Painted Galv.1 x 1 x C\v (sw) 1.0 + +
1Z\v x 1Z\v x 1 (sw) 1.3 + +
1Z\x x 1Z\x x C\v (sw) 1.5 + +1 (sw) 1.5 + +
1Z\v (sw) 1.7 + +2 x 2 x C\v 2.5 $313.00 $388.50
1 2.7 313.00 396.001Z\v (sw) 2.9 313.00 396.00
1Z\x 3.0 313.00 396.00
2Z\x x 2Z\x x C\v (sw) 3.5 377.00 429.501 (sw) 3.8 377.00 470.50
1Z\v 3.8 383.50 427.50
1Z\x 3.9 397.50 482.502 (sw) 4.5 556.00 661.00
3 x 3 x C\v (sw) 5.9 601.00 638.501 (d) 6.1 321.00 415.501Z\v 6.3 500.50 620.00
1Z\x (sw) 6.5 500.50 620.002 (sw) 6.2 500.50 614.00
2Z\x (sw) 6.4 500.50 620.004 x 4 x C\v (sw) 7.2 797.50 838.00
1 7.8 475.00 600.001Z\v (sw) 8.5 475.00 1410.50
1Z\x 9.2 475.00 633.002 11.2 475.00 633.00
2Z\x 11.4 550.00 720.003 11.6 550.00 723.50
5 x 5 x 2 (sw) 14.5 1105.50 1002.002Z\x (sw) 15.2 777.00 1021.50
3 (sw) 16.6 1105.50 1021.504 (sw) 16.7 1105.50 1081.00
6 x 6 x 1 (sw) 23.0 1086.00 1412.501Z\x (sw) 25.0 1086.00 1412.50
2 21.6 1086.00 1412.502Z\x 21.4 1086.00 1410.50
3 26.5 1086.00 1456.004 25.0 1105.50 1464.505 23.2 1105.50 1450.00
8 x 8 x 2 (sw) 33.5 1505.00 1990.003 (sw) 33.6 1505.00 1990.00
4 41.8 2106.00 2737.505 (sw) 34.0 2106.00 2668.50
6 42.3 2106.00 2743.5010 x 10 x 2 (sw) 62.0 2171.50 2971.50
3 (sw) 60.0 2442.50 3058.004 (sw) 61.0 2513.00 3146.005 (sw) 52.0 2974.00 3547.506 (sw) 59.0 2974.00 3359.508 (sw) 64.7 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-40
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. 29T Threaded Reducing Tee
Reducing Tee with Threaded BranchRefer to publication 07.01
No. 29T
Size Reducing Tee No. 29T with Threaded BranchInches Aprx. Wgt. Each
LbsPrice Each
Run x Branch Painted Galv.12 x 12 x 3 (sw) 80.0 $2742.00 $3882.00
4 (sw) 82.0 2532.00 3701.505 (sw) 75.0 + +6 (sw) 75.0 2742.00 3882.008 (sw) 80.0 + +
10 (sw) 84.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
1-41
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. 50 Concentric Reducer, No. 51 Eccentric Reducer
ReducersRefer to publication 07.01
No. 50
No. 51
REDUCERS – CONCENTRIC OR ECCENTRIC *
Size Concentric Reducer No. 50 Eccentric Reducer No. 51
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.1Z\v x C\v 1.9 $505.50 $529.50 3.2 + +
1 1.9 505.50 579.50 3.2 + +1Z\x x C\v 1.4 505.50 579.50 4.5 + +
1 0.8 83.00 105.00 4.5 (sw) $1010.50 $1065.001Z\v 1.0 83.00 105.00 4.5 973.50 1145.00
2 x C\v 0.9 149.50 189.50 2.0 (sw) 993.00 1123.501 0.7 83.00 105.00 2.3 (sw) 954.00 1090.50
1Z\v 1.2 83.00 105.00 4.6 (sw) + +
1Z\x 1.0 83.00 105.00 1.1 123.50 145.00
2Z\x x C\v 1.3 551.00 641.50 3.3 + +1 1.1 127.50 157.50 3.5 2218.00 2528.50
1Z\v 3.3 95.50 125.00 1.4 175.50 218.50
1Z\x 3.6 83.00 104.50 3.7 (sw) 861.00 1001.002 3.9 83.00 105.00 4.3 175.50 218.50
3 x C\v 1.5 + + 4.5 + +1 1.3 128.00 157.50 4.8 (sw) 1681.50 +
1Z\v 1.4 129.50 155.50 4.8 1681.50 1788.50
1Z\x 5.1 117.00 196.50 5.1 (sw) 1011.50 1121.502 1.6 117.00 143.50 6.0 212.50 266.00
2Z\x 1.8 117.00 147.00 7.0 212.50 267.00
3Z\x x 3 2.0 122.00 155.50 7.0 (sw) + +4 x 1 3.0 225.00 277.50 6.5 (sw) + +
1Z\v 4.6 1272.50 1367.00 – – –
1Z\x 2.6 (sw) 187.00 231.00 8.1 (sw) 2580.50 3040.002 2.4 187.00 231.00 3.3 314.00 394.00
2Z\x 2.7 187.00 231.00 3.4 314.00 394.003 3.2 187.00 232.50 3.5 307.50 399.00
3Z\x 2.9 187.00 234.00 8.0 (sw) + +5 x 2 9.0 (sw) 2012.50 2118.00 5.2 (sw) + +
2Z\x 4.3 301.50 383.00 10.8 (sw) + +3 5.0 301.50 383.00 11.1 (sw) 1897.00 2245.504 4.3 301.50 377.50 12.0 445.50 578.50
‡ Concentric and eccentric reducers 14 - 24” are steel and supplied with roll grooves Steel Reducers eccentric and concentric available through 30”. Contact Victaulic for details.
Cut grooved fittings are non-cancellable and non-returnable.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2016-GENERAL-C1-42
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
ReducersRefer to publication 07.01
No. 50
No. 51
Size Concentric Reducer No. 50 Eccentric Reducer No. 51
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.6 x 1 5.0 $393.00 $501.00 14.5 (sw) + +
1Z\x 5.5 1561.50 1767.00 + + +2 6.6 314.00 399.50 14.5 (sw) $4338.00 $5172.00
2Z\x 6.4 314.00 400.00 14.2 (sw) 3228.50 3877.503 6.4 314.00 400.00 15.0 477.00 667.004 6.5 314.00 413.50 17.0 477.00 641.005 6.4 314.00 417.00 17.0 461.50 625.00
8 x 3 9.3 557.00 705.50 22.0 (sw) 5163.50 6043.504 10.4 540.00 703.00 23.0 (sw) 3015.00 3734.505 11.6 557.00 728.00 23.0 (sw) 2800.50 3467.506 11.9 540.00 717.00 24.0 801.50 1072.00
10 x 4 19.7 1103.00 1390.50 32.0 (sw) 6896.50 8524.505 33.0 5480.00 5853.00 34.6 0.00 0.006 20.0 1103.00 1434.00 36.9 (sw) 5769.00 7259.008 22.0 1103.00 1520.50 21.6 1638.50 2085.00
12 x 4 44.0 + + 48.0 (sw) + +6 24.6 1357.50 1733.50 50.0 (sw) 7392.00 9210.508 52.0 1357.50 1826.50 53.5 (sw) 7228.50 9090.50
10 39.0 1357.50 1846.00 57.0 (sw) 5366.50 6798.0014 x 6 65.0 3290.50 + 60.0 + +
8 65.0 3618.50 + 60.0 + –10 66.0 4299.50 6236.50 65.0 + –12 68.0 4299.50 6262.00 66.0 + –
16 x 8 73.0 4832.00 6620.50 73.0 + –10 73.0 4659.00 + 73.0 + –12 73.0 4988.50 6688.50 73.0 + –14 73.0 4933.00 6710.00 73.0 + +
18 x 10 91.0 5591.50 6679.50 91.0 + +12 91.0 6140.50 7334.50 91.0 + +14 91.0 6084.50 7633.00 91.0 + +16 91.0 6303.50 7814.50 91.0 + –
20 x 10 110.0 8386.00 10020.50 177.0 + +12 120.0 8084.50 9660.00 120.0 + +14 149.0 8824.00 10543.00 149.0 + +16 120.0 8787.00 10479.50 120.0 + +18 136.0 9177.50 12181.00 136.0 + +
24 x 10 142.0 11070.50 13229.00 142.0 + +12 150.0 10413.00 12442.00 150.0 + +14 162.0 10632.00 + 162.0 + +16 162.0 10730.50 + 162.0 + +18 162.0 11399.00 13623.00 162.0 + +
‡ Concentric and eccentric reducers 14 - 24” are steel and supplied with roll grooves Steel Reducers eccentric and concentric available through 30”. Contact Victaulic for details.
Cut grooved fittings are non-cancellable and non-returnable.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
1-43
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. W50 AGS Concentric Reducer, No. W51 AGS Eccentric Reducer
AGS ReducersRefer to publication 20.05
VICTAULICNo.W50
No. W50
VICTAULICNo.W51
No. W51
AGS REDUCERS – CONCENTRIC OR ECCENTRIC *
Size AGS Concentric Reducer No. W50 AGS Eccentric Reducer No. W51
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.14 x 6 56.0 $7442.00 $8057.50 60.0 $8447.50 $8959.50
8 58.6 4233.00 4865.50 60.0 6028.50 6571.0010 * 60.4 3123.50 3940.00 60.4 3610.00 4502.5012 * 63.4 3123.50 5377.00 63.4 3610.00 4513.50
16 x 8 71.6 6506.00 7519.00 73.0 9023.00 +10 73.8 5631.00 6675.50 73.0 6855.00 +
12 * 75.6 3297.50 4225.50 75.6 3835.00 4825.0014 * 77.5 3297.50 4239.50 77.5 3835.00 4868.50
18 x 10 85.0 9316.50 10672.50 91.0 + +12 88.1 8536.50 9402.50 91.0 9572.00 10859.50
14 * 90.9 4338.50 5546.50 90.9 5188.00 6498.5016 * 94.0 4338.50 5678.00 94.0 5188.00 6614.50
20 x 12 130.0 8526.00 9972.00 130.0 12683.50 +14 134.0 7594.50 9076.00 134.0 10674.00 +
16 * 138.0 5552.50 7275.00 138.0 6767.50 8600.0018 * 142.0 5552.50 7300.50 142.0 6767.50 8739.50
24 x 16 159.0 13532.50 16708.50 159.0 + +18 * 163.0 11277.00 13923.50 163.0 11502.50 14227.0020 * 167.0 11277.00 14072.50 167.0 11502.50 14227.00
26 x 14 167.0 + + 159.0 + +16 173.0 + + 167.0 + +18 179.0 + + 175.0 + +20 185.0 + + 183.0 + +22 192.0 + + 191.0 + +24 199.0 + + 199.0 + +
28 x 14 180.0 + + 167.0 + +16 185.0 + + 175.0 + +18 190.0 + + 183.0 + +20 196.0 + + 191.0 + +22 202.0 + + 199.0 + +24 208.0 + + 207.0 + +26 216.0 + + 215.0 + +
30 x 14 192.0 + + 175.0 + +16 197.0 + + 183.0 + +18 202.0 + + 191.0 + +20 207.0 + + 199.0 + +22 213.0 + + 207.0 + +24 218.0 + + 215.0 + +26 225.0 + + 223.0 + +28 232.0 + + 232.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Single and double reduction concentric and eccentric reducers 14 - 24” are cast ductile iron and supplied with AGS roll grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E dimensions may be substituted to meet delivery requirements.
VICTAULIC.COM PL2016-GENERAL-C1-44
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
AGS ReducersRefer to publication 20.05
VICTAULICNo.W50
No. W50
VICTAULICNo.W51
No. W51
Size AGS Concentric Reducer No. W50 AGS Eccentric Reducer No. W51
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.32 x 16 320.0 + + 282.0 + +
18 325.0 + + 292.0 + +20 330.0 + + 303.0 + +22 336.0 + + 314.0 + +24 342.0 + + 324.0 + +26 348.0 + + 335.0 + +28 355.0 + + 346.0 + +30 363.0 + + 356.0 + +
40 x 20 365.0 + + 316.0 + +22 369.0 + + 326.0 + +24 373.0 + + 337.0 + +26 377.0 + + 346.0 + +28 382.0 + + 357.0 + +30 387.0 + + 367.0 + +32 393.0 + + 378.0 + +36 407.0 + + 399.0 + +
42 x 20 386.0 + + 327.0 + +22 390.0 + + 337.0 + +24 393.0 + + 348.0 + +26 397.0 + + 359.0 + +28 401.0 + + 369.0 + +30 405.0 + + 378.0 + +32 409.0 + + 389.0 + +36 421.0 + + 410.0 + +40 438.0 + + 432.0 + +
46 x 22 479.0 + + 419.0 + +24 485.0 + + 431.0 + +26 490.0 + + 444.0 + +28 496.0 + + 456.0 + +30 502.0 + + 469.0 + +32 508.0 + + 481.0 + +36 523.0 + + 504.0 + +38 531.0 + + 516.0 + +40 540.0 + + 529.0 + +42 550.0 + + 542.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Single and double reduction concentric and eccentric reducers 14 - 24” are cast ductile iron and supplied with AGS roll grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E dimensions may be substituted to meet delivery requirements.
1-45
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
AGS ReducersRefer to publication 20.05
VICTAULICNo.W50
No. W50
VICTAULICNo.W51
No. W51
Size AGS Concentric Reducer No. W50 AGS Eccentric Reducer No. W51
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.48 x 24 507.0 + + 444.0 + +
26 513.0 + + 456.0 + +28 518.0 + + 467.0 + +30 523.0 + + 481.0 + +32 529.0 + + 494.0 + +36 541.0 + + 516.0 + +38 548.0 + + 529.0 + +40 557.0 + + 542.0 + +42 565.0 + + 554.0 + +46 586.0 + + 579.0 + +
54 x 28 1015.0 + + 974.0 + +30 1035.0 + + 998.0 + +32 1054.0 + + 1022.0 + +36 1095.0 + + 1070.0 + +38 1116.0 + + 1095.0 + +40 1138.0 + + 1119.0 + +42 1158.0 + + 1143.0 + +46 1202.0 + + 1191.0 + +48 1224.0 + + 1215.0 + +
56 x 28 1081.0 + + 1035.0 + +30 1101.0 + + 1060.0 + +32 1122.0 + + 1085.0 + +36 1164.0 + + 1135.0 + +38 1185.0 + + 1160.0 + +40 1207.0 + + 1186.0 + +42 1228.0 + + 1211.0 + +46 1273.0 + + 1261.0 + +48 1296.0 + + 1286.0 + +54 1368.0 + + 1361.0 + +
60 x 30 1241.0 + + 1190.0 + +32 1263.0 + + 1217.0 + +36 1307.0 + + 1270.0 + +38 1330.0 + + 1297.0 + +40 1353.0 + + 1324.0 + +42 1376.0 + + 1351.0 + +46 1423.0 + + 1404.0 + +48 1447.0 + + 1431.0 + +54 1521.0 + + 1512.0 + +56 1547.0 + + 1538.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Single and double reduction concentric and eccentric reducers 14 - 24” are cast ductile iron and supplied with AGS roll grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E dimensions may be substituted to meet delivery requirements.
VICTAULIC.COM PL2016-GENERAL-C1-46
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. 850 and No. 850H Concentric Reducer
Concentric ReducerRefer to publication 100.01
No. 850 and No. 850H
NO. 850 CONCENTRIC REDUCER
Nom. SizeNo. 850 Sch. 40
No. 850H Sch. 80
Inches
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each2Z\x x 2 3.7 $174.00 5.0 $217.50
3 x 2 4.5 176.50 6.2 219.502Z\x 5.1 208.50 7.1 261.50
4 x 2 6.4 203.00 9.1 254.502Z\x 6.9 251.00 9.9 313.00
3 7.4 251.00 10.6 313.006 x 2Z\x 12.2 538.50 18.8 672.50
3 12.9 489.00 19.9 610.504 14.2 691.00 21.9 864.50
8 x 4 20.4 814.00 31.7 1019.006 23.8 1034.50 36.9 1293.00
No. 851 and No. 851H Eccentric Reducer
Eccentric ReducerRefer to publication 100.01
No. 851 and No. 851H
NO. 851 ECCENTRIC REDUCER
Nom. SizeNo. 851 Sch. 40
No. 851H Sch. 80
Inches
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each2Z\x x 2 3.7 $360.50 5.0 $450.50
3 x 2 4.5 410.00 6.2 513.002Z\x 5.1 410.00 7.1 513.00
4 x 2 6.4 500.50 9.1 625.502Z\x 6.9 500.50 9.9 625.50
3 7.4 500.50 10.6 625.506 x 2Z\x 12.2 1193.00 18.8 1490.00
3 12.9 1094.50 19.9 1367.504 14.2 1266.50 21.9 1581.00
8 x 4 20.4 1954.00 31.7 2442.006 23.8 2046.00 36.9 2558.00
1-47
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No.(s) 53, 54 and 55 Swaged Nipples
Swaged NipplesRefer to publication 07.01
No. 53 Grooved x Grooved
No. 54 Grooved x Threaded
No. 55 Threaded x Grooved
SWAGED NIPPLES
Nominal SizeAprx.
Wgt. Ea.
Steel Swaged Nipples
No. 53, 54, 55 Plated
Inches Lbs Price Each2 x 1 2.0 $656.50
1Z\v 2.0 656.501Z\x 2.0 554.00
2Z\x x 1 3.0 797.501Z\v 3.0 797.501Z\x 3.0 797.50
2 3.0 654.003 x 1 4.5 1155.50
1Z\v 4.5 1155.501Z\x 4.5 1070.00
2 4.5 747.002Z\x 4.6 747.00
3Z\x x 3 6.8 +4 x 1 7.5 1608.00
1Z\v 7.5 1543.501Z\x 7.5 1543.50
2 7.5 1278.00
Nominal SizeAprx.
Wgt. Ea.
Steel Swaged Nipples
No. 53, 54, 55 Plated
Inches Lbs Price Each4 x 2Z\x 7.5 $1278.00
3 7.5 1087.003Z\x 7.5 +
5 x 2 11.5 4268.503 11.5 3135.004 11.5 2976.50
6 x 1 17.0 7355.501Z\v 17.0 7355.501Z\x 17.2 5732.00
2 17.4 5732.002Z\x 17.4 5732.00
3 17.4 4083.503Z\x 17.4 +
4 17.5 3373.504Z\x 17.5 +
5 17.5 3373.508 x 6 20.0 4698.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 52 – Reducer Threaded Small End
VICTAULIC.COM PL2016-GENERAL-C1-48
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Reducer Threaded Small EndRefer to publication 07.01
No. 52
REDUCER THREADED SMALL END
Nominal Size
Aprx. Wgt. Ea. Price Each
Inches Inlet x Outlet Lbs Painted Galv.
1Z\x x 1 0.8 $157.50 $182.501Z\v 0.9 86.00 112.00
2 x C\v 0.9 173.50 201.501 0.7 173.50 202.00
1Z\v 1.2 173.50 203.50
1Z\x 1.0 173.50 202.00
2Z\x x 1 1.1 230.00 279.501Z\v 1.2 (sw) 203.00 241.50
1Z\x 1.3 (sw) 203.00 241.502 1.4 203.00 241.50
3 x C\v 1.5 (sw) + +1 1.3 234.00 273.50
1Z\v 1.5 259.50 301.00
1Z\x 1.5 259.50 305.002 1.5 259.50 305.00
2Z\x 2.4 (sw) 286.50 337.504 x 1 2.3 242.50 294.50
1Z\x 2.7 273.50 326.502 2.6 273.50 330.00
2Z\x 2.6 305.00 364.003 2.5 305.00 363.50
5 x 4 4.5 1695.50 1840.506 x 1 5.5 475.00 582.50
2 5.7 475.00 584.502Z\x 5.8 333.50 424.00
3 5.8 592.50 714.504 6.5 (sw) 1803.00 2074.505 2.0 (sw) 1943.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
1-49
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. 30 Lateral
LateralRefer to publication 07.01
No. 30
LATERAL
Nom. Size 45° Lateral No. 30
Inches
Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv.C\v 1.0 (sw) $238.00 $269.501 1.7 (sw) + +
1Z\v 2.5 259.50 340.50
1Z\x 3.5 (sw) 301.00 415.002 4.6 (sw) 392.50 481.00
2Z\x 9.0 (sw) 468.00 609.503 11.7 646.50 834.00
3Z\x 17.8 (sw) + +4 17.9 700.50 989.505 21.8 (sw) 1492.00 1875.506 43.6 (sw) 1784.50 2403.508 72.0 (sw) 2811.50 3816.50
10 105.0 (sw) 3940.00 5351.5012 165.0 (sw) 5259.50 7366.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
No. W30 AGS Lateral
AGS LateralRefer to publication 20.05
VIC
TAU
LIC
No.
W3
0
No. W30
AGS LATERAL
Nom. Size AGS 45° Lateral No. W30
Inches
Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv.14 276.0 $5707.00 $11918.5016 344.2 7148.00 14888.0018 429.0 10916.00 20570.0020 500.0 13052.50 24304.0024 715.0 19989.00 36077.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Victaulic fittings listed are made of segmentally welded steel.
VICTAULIC.COM PL2016-GENERAL-C1-50
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. 60 Cap
CapRefer to publication 07.01
No. 60
CAP
Nom. Size Cap No. 60
Inches
Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv.C\v 0.2 $73.50 $95.001 0.3 73.50 95.00
1Z\v 0.3 73.50 95.00
1Z\x 0.5 73.50 95.002 0.6 73.50 95.00
2Z\x 1.0 73.50 95.003 1.4 90.50 117.00
3Z\x 2.5 143.00 181.004 2.5 108.00 146.505 4.6 214.00 297.006 6.0 232.50 339.008 13.1 366.00 543.50
10 21.0 600.00 875.0012 35.6 1510.00 1968.00
Caps can be tapped Z\x or C\v-inch. Contact Victaulic.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Caps are malleable/ductile iron.
No. W60 AGS Cap
AGS CapRefer to publication 20.05
VIC
TAU
LIC
No.
W6
0
No. W60
AGS CAP
Nom. Size AGS Cap No. W60
Inches
Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv.14 33.2 $2656.00 $3219.0016 41.2 3506.50 4198.5018 54.6 4403.00 5303.5020 67.5 6214.50 7529.5024 96.0 7186.00 8699.0026 144.0 + +28 166.0 + +30 187.0 + +32 209.0 + +36 253.0 + +40 391.0 + +42 420.0 + +46 532.0 + +48 613.0 + +54 785.0 + +56 875.0 + +60 977.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
+ Quoted on application. Contact Victaulic for pricing and availability.
1-51
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. 860 and No. 860H Cap
CapRefer to publication 100.01
No. 860 and No. 860H
NO. 860 CAP
NominalNo. 860 Sch. 40
No. 860H Sch. 80
Inches
Aprx. Wgt. Ea.
Lbs. Price Each
Aprx. Wgt. Ea.
Lbs. Price Each2 1.6 $126.50 2.3 $159.50
2Z\x 2.3 126.50 3.1 159.503 3.4 126.50 4.7 159.504 5.3 135.00 7.5 168.006 11.2 313.00 17.4 391.508 18.9 595.50 29.4 742.00
No. 61 Bull Plug
Bull PlugsRefer to publication 07.01
No. 61
ELECTROPLATED STEEL BULL PLUGS
Nom. SizeElectroplated
Steel Bull Plug No. 61
Inches
Aprx. Wgt. Ea.
Lbs Price Each2 2.0 $388.50
2Z\x 3.0 533.003 4.5 764.004 7.5 962.505 12.0 1566.006 17.0 3182.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Other sizes available upon request. Contact Victaulic for details.
VICTAULIC.COM PL2016-GENERAL-C1-52
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. 30R Reducing Lateral
Reducing LateralsRefer to publication 07.01
No. 30R
REDUCING LATERALS
Nominal Size Reducing Laterals No. 30R †
Inches
Aprx. Wgt. Each
Lbs
Price Each
Painted Galv.3 x 3 x 2 9.8 $720.00 $839.00
2Z\x 9.8 720.00 901.004 x 4 x 2 10.0 812.50 1007.50
2Z\x 10.0 917.00 1126.003 18.3 1018.00 1316.00
5 x 5 x 2 24.0 1003.50 1443.003 27.0 1249.00 1663.504 26.5 1403.00 1829.50
6 x 6 x 3 37.0 1411.00 1939.004 36.5 1568.00 2111.005 44.7 1755.00 2399.50
8 x 8 x 4 62.0 2222.50 3089.505 75.5 2439.00 3465.006 82.0 2593.00 3698.50
10 x 10 x 4 104.8 2844.00 4163.005 99.0 + 4361.006 105.8 3222.00 4599.508 118.0 3395.00 5188.50
12 x 12 x 4 135.0 3892.50 5604.505 122.0 + 5628.506 137.0 4029.00 5791.508 147.0 4363.50 6262.50
10 167.0 4996.50 7156.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† All No. 30R fittings are segmentally welded steel.
1-53
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. W30R AGS Reducing Lateral
AGS Reducing Laterals
Refer to publication 20.05
No. W30R
AGS REDUCING LATERALS
Nominal Size AGS Reducing Lateral No. W30R †
Inches
Aprx. Wgt. Each
Lbs
Price Each
Painted Galv.14 x 14 x 4 162.4 + +
6 167.6 $3682.00 $5292.508 173.5 4585.50 6274.50
10 181.0 4411.00 6177.0012 189.2 4333.50 6180.50
16 x 16 x 6 206.7 + +8 213.1 + +
10 221.1 7248.00 9379.0012 229.9 7599.00 9807.5014 230.9 7614.00 9872.00
18 x 18 x 6 253.1 + +8 259.9 + 7780.00
10 285.0 + 8001.5012 277.6 5519.50 8169.5014 278.7 6709.00 9413.0016 284.3 6794.50 9585.50
20 x 20 x 12 330.0 + +14 331.2 + +16 337.2 + +
24 x 24 x 16 448.5 + +18 515.0 + +20 461.8 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
† All No. W30R fittings are segmentally welded steel.
VICTAULIC.COM PL2016-GENERAL-C1-54
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. 32 Tee Wyes
Tee WyesRefer to publication 07.01
No. 32
TEE WYES
Nominal Size Tee Wye No. 32 †
Inches
Aprx. Wgt. Each
Lbs
Price Each
Painted Galv.2 x 2 x 2 6.4 $804.50 $960.50
2Z\x x 2Z\x x 2Z\x 11.5 1025.50 1256.003 x 3 x 3 14.3 1314.50 1626.50
3Z\x x 3Z\x x 3Z\x 22.9 + +4 x 4 x 3 23.0 1390.00 1768.50
4 26.0 1760.50 2304.505 x 5 x 3 29.0 1609.00 2031.00
4 36.7 1973.50 2504.005 48.0 2656.00 3350.50
6 x 6 x 3 37.3 1762.50 2343.504 46.3 2133.50 2806.005 55.0 2841.00 3684.506 60.5 2952.50 3864.00
8 x 8 x 3 76.0 + +4 76.4 2755.00 3788.505 85.6 3491.50 4697.006 112.0 3640.50 4189.008 127.1 4613.50 6338.50
10 x 10 x 3 96.0 2961.00 4110.504 97.4 3414.50 4581.505 115.1 4247.50 5547.506 133.1 4197.50 5883.508 156.0 5146.50 7149.50
10 190.0 6836.00 9242.0012 x 12 x 12 240.0 9436.50 12530.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† All No. 32 fittings are segmentally welded steel.
No. 36B VicBlast™ Nozzle
VicBlast™ Nozzle
No. 36B
VICBLAST NOZZLE
Nominal Size Inches
Aprx. Wgt. Each Price Each
Air Water Lbs Endurion Coated1 C\, FPT 1.60 $142.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
1-55
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
No. 48 Hose Nipples
Hose NipplesRefer to publication 07.01
No. 48
STEEL HOSE NIPPLES
Nom. SizeLength Inches Steel Hose Nipple No. 48
Inches End to End Barb
Aprx. Wgt. Ea.
LbsPrice Each
PlatedC\v 3.25 1.625 0.3 $130.001 3.25 1.625 0.4 130.00
1Z\v 3.63 1.859 0.6 162.001Z\x 4.00 2.125 0.8 173.00
2 4.63 2.500 1.1 208.002 x 1Z\x 4.63 3.750 0.9 274.002 x Z\x 6.00 3.500 1.2 338.00
2 6.00 1.875 1.4 287.002Z\x 5.50 2.875 2.0 310.00
3 6.00 3.250 3.2 371.004 7.25 3.875 4.9 637.50
4 x 3 7.25 3.250 4.1 2456.004 17.38 14.000 5.7 1163.505 9.75 5.375 8.0 896.506 11.00 6.500 14.3 1459.008 12.50 7.750 24.7 3193.00
10 14.00 8.500 40.1 4813.0012 16.00 10.125 62.0 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
No(s). 45 and 46 Flanged Adapter Nipples
Flanged Adapter NipplesRefer to publication 07.01
Nos. 45 & 46
FLANGED ADAPTER NIPPLES – NO. 45 – 150 LB AND NO. 46 – 300 LB
Size x Length No. 45 – 150 lb No. 46 – 300 lb Inches Black Galv. Black Galv.
C\v x 3 + + + +1 x 3 $533.00 $624.50 + +1 x 4 + + + +
1Z\v x 4 556.00 654.00 + +1Z\x x 4 557.00 656.50 $1199.50 +
2 x 4 567.00 694.00 675.00 $837.002Z\x x 4 765.50 941.50 932.50 1162.50
3 x 4 777.00 969.50 948.50 1218.003Z\x x 4 952.00 + + +
4 x 6 1123.00 1432.50 1409.50 2633.505 x 6 1616.50 2014.50 2119.00 +6 x 6 1641.50 2103.50 2168.00 2907.508 x 6 2172.00 2852.50 3018.00 4067.50
10 x 8 2884.00 4017.00 4254.50 +12 x 8 4027.00 7587.50 9445.00 10510.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-56
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
No. W45R AGS Flanged Adapter Nipple
AGS Flanged Adapter Nipple
Refer to publication 20.05
No. W45R
AGS FLANGED ADAPTER NIPPLES – ANSI 150
Size x LengthAprx.
Wgt. Ea. AGS Flanged Adapter Nipple – No. W45R *
Inches LbsPrice Each
Painted Galv.14 x 8 122.0 $3969.00 $5179.5016 x 8 136.0 4527.50 5887.5018 x 8 168.0 5796.50 7523.0020 x 8 208.0 7314.00 9456.0024 x 8 274.0 9296.00 12060.5026 x 12 254.0 + +28 x 12 262.0 + +30 x 12 270.0 + +32 x 12 278.0 + +36 x 12 340.0 + +40 x 12 361.0 + +42 x 12 372.0 + +46 x 12 393.0 + +48 x 12 404.0 + +54 x 16 372.0 + +56 x 16 393.0 + +60 x 16 404.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
* Raised face flanges are standard; flat flanges are quoted on application.
+ Quoted on application. Contact Victaulic for pricing and availability.
No(s). 845F Flat Face and 845R Raised Face ANSI Class 150 Flanged Adapter Nipples
Flanged Adapter NipplesRefer to publication 100.01
No. 845
No. 846
FLANGED ADAPTER NIPPLES – ANSI CLASS 150 AND CLASS 300
Nom. Size ANSI Class 150 Flange Adapter Nipple ANSI Class 300 Flange Adapter Nipple
Inches
Aprx. Wgt. Ea. Price Each
Aprx. Wgt. Ea. Price Each
LbsNo. 845F Flat Face
No. 845R Raised Face Lbs
No. 846F Flat Face
No. 846R Raised Face
2 6.8 + $621.50 9.6 + $763.502Z\x 9.3 + 1240.00 12.6 + 905.50
3 11.7 + 1270.50 16.2 + 1059.004 17.5 + 1447.50 24.8 + 1991.006 28.3 + 2039.00 43.7 + 2187.008 46.1 + 2524.00 71.6 + 4168.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
* Raised face flanges are standard; flat flanges are quoted on application.
1-57
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
3D Cast Bends for Abrasive Services
3D Cast Bend
FOR ABRASIVE SERVICESRefer to publication 07.01
90° Cast Bend No. 100 – 3D
45° Cast Bend No. 110 – 3D
3D CAST BENDS – 90° BEND OR 45° BEND
Fitting Size 90° Bend 45° Bend
Inches
Aprx. Wgt. Ea.
Lbs
Center to End
Inches Price Each
Aprx. Wgt. Ea.
Lbs
Center to End Inches Price Each
2 5.0 10.00 $805.50 4.7 6.50 $779.503 16.0 13.00 1291.00 10.4 7.75 1158.504 22.5 16.00 2963.50 17.2 9.00 1477.506 70.0 24.00 5609.50 45.0 13.50 3136.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C1-58
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Long Radius Bends – 3D
3D Long Radius Steel BendsRefer to publication 07.02
No. 100-3D 90° Bend
No. 14-3D 60° Bend
No. 110-3D 45° Bend
3D LONG RADIUS BENDS – 90° BEND, 60° BEND, OR 45° BEND
Nom. Size90° Bend
No. 100-3D60° Bend No. 14-3D
45° Bend No. 110-3D
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each2 5.3 + 4.3 + 3.9 +
2Z\x 9.5 + 7.7 + 6.7 +3 14.0 + 11.0 + 9.5 +
3Z\x 18.6 + 14.4 + 12.3 +4 24.1 + 18.5 + 15.7 +
4Z\x 31.6 + 24.2 + 20.5 +5 40.9 + 31.3 + 26.5 +6 63.7 + 48.8 + 41.3 +8 127.8 + 97.9 + 82.9 +
10 226.4 + 173.4 + 146.9 +12 332.7 + 254.8 + 215.9 +
14 † 427.3 + 327.3 + 277.3 +15 † – + – + – +16 † 560.1 + 429.0 + 363.5 +18 † 710.7 + 544.4 + 461.3 +20 † 879.3 + 673.5 + 570.7 +22 † – + – + – +24 † 1270.3 + 973.0 + 824.4 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Also available 76.1 mm and 165.1 mm sizes. Contact Victaulic.
† For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 15-3D 30° Bend
No. 12-3D 22Z\x° Bend
No. 13-3D 11Z\v° Bend
3D LONG RADIUS BENDS – 30° BEND, 22Z\x° BEND, OR 11Z\v° BEND
Nom. Size30° Bend No. 15-3D
22Z\x° Bend No. 12-3D
11Z\v° Bend No. 13-3D
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each2 3.4 + 3.2 + 2.8 +
2Z\x 5.8 + 5.3 + 4.6 +3 7.3 + 7.3 + 6.2 +
3Z\x 10.2 + 9.2 + 7.6 +4 12.8 + 11.4 + 9.3 +
4Z\x 16.8 + 14.9 + 12.2 +5 21.8 + 19.4 + 15.8 +6 33.9 + 30.1 + 24.6 +8 68.0 + 60.5 + 49.3 +
10 120.5 + 107.2 + 87.3 +12 177.0 + 157.5 + 128.3 +
14 † 227.3 + 202.3 + 164.8 +16 † 297.9 + 265.2 + 216.0 +18 † 378.1 + 336.5 + 274.1 +20 † 467.8 + 416.3 + 339.2 +22 † – + – + – +24 † 675.7 + 601.4 + 490.0 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Also available 76.1 mm and 165.1 mm sizes. Contact Victaulic.
† For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability.
+ Quoted on application. Contact Victaulic for pricing and availability.
1-59
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Long Radius Bends – 5D
5D Long Radius Steel BendsRefer to publication 07.02
No. 100-5D 90° Bend
No. 14-5D 60° Bend
No. 110-5D 45° Bend
5D LONG RADIUS BENDS – 90° BEND, 60° BEND, OR 45° BEND
Nom. Size90° Bend
No. 100-5D60° Bend No. 14-5D
45° Bend No. 110-5D
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each2 7.2 + 5.6 + 4.8 +
2Z\x 13.3 + 10.2 + 8.6 +3 19.9 + 15.0 + 12.5 +
3Z\x 26.9 + 20.0 + 16.5 +4 35.4 + 26.0 + 21.3 +
4Z\x 46.3 + 34.0 + 27.9 +5 60.0 + 44.1 + 36.1 +6 93.5 + 68.6 + 56.2 +8 187.6 + 137.7 + 112.8 +
10 332.4 + 244.1 + 199.9 +12 488.4 + 358.6 + 293.7 +
14 † 627.4 + 460.7 + 377.3 +15 † – + – + – +16 † 822.2 + 603.8 + 494.5 +18 † 1043.4 + 766.2 + 627.6 +20 † 1290.9 + 947.9 + 776.4 +22 † – + – + – +24 † 1864.8 + 1369.3 + 1121.6 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 15-5D 30° Bend
No. 12-5D 22Z\x° Bend
No. 13-5D 11Z\v° Bend
5D LONG RADIUS BENDS – 30° BEND, 22Z\x° BEND, OR 11Z\v° BEND
Nom. Size30° Bend No. 15-5D
22Z\x° Bend No. 12-5D
11Z\v° Bend No. 13-5D
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each2 4.0 + 3.6 + 3.0 +
2Z\x 7.0 + 6.2 + 5.0 +3 10.0 + 8.8 + 6.9 +
3Z\x 13.0 + 11.3 + 8.7 +4 16.6 + 14.3 + 10.7 +
4Z\x 21.7 + 18.6 + 14.0 +5 28.1 + 24.1 + 18.2 +6 43.8 + 37.6 + 28.3 +8 87.9 + 75.4 + 56.8 +
10 155.8 + 133.7 + 100.6 +12 228.9 + 196.4 + 147.8 +
14 † 627.0 + 252.3 + 189.8 +16 † 385.3 + 330.7 + 248.8 +18 † 489.0 + 419.7 + 315.7 +20 † 605.0 + 519.2 + 390.6 +24 † 873.9 + 750.1 + 564.3 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-60
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Long Radius Bends – 6D
6D Long Radius Steel BendsRefer to publication 07.02
No. 100-6D 90° Bend
No. 14-6D 60° Bend
No. 110-6D 45° Bend
6D LONG RADIUS BENDS – 90° BEND, 60° BEND, OR 45° BEND
Nom. Size90° Bend
No. 100-6D60° Bend No. 14-6D
45° Bend No. 110-6D
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each2 8.2 + 6.3 + 5.3 +
2Z\x 15.2 + 11.4 + 9.5 +3 22.9 + 17.0 + 14.0 +
3Z\x 31.1 + 22.8 + 18.6 +4 41.1 + 29.8 + 24.1 +
4Z\x 53.7 + 39.0 + 31.6 +5 69.6 + 50.5 + 40.9 +6 108.4 + 78.6 + 63.7 +8 217.5 + 157.7 + 127.8 +
10 385.4 + 279.4 + 226.4 +12 566.2 + 410.5 + 332.7 +
14 † 727.4 + 527.4 + 427.3 +15 † – + – + – +16 † 953.3 + 691.1 + 560.1 +18 † 1209.7 + 877.1 + 710.1 +20 † 1496.6 + 1085.1 + 879.3 +22 † – + – + – +24 † 2162.0 + 1567.5 + 1270.3 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability.
No. 15-6D 30° Bend
No. 12-6D 22Z\x° Bend
No. 13-6D 11Z\v° Bend
6D LONG RADIUS BENDS – 30° BEND, 22Z\x° BEND, OR 11Z\v° BEND
Nom. Size 30° Bend No. 15-6D
22Z\x° Bend No. 12-6D
11Z\v° Bend No. 13-6D
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each2 4.3 + 3.9 + 3.2 +
2Z\x 7.7 + 6.7 + 5.3 +3 11.0 + 9.5 + 7.3 +
3Z\x 14.4 + 12.3 + 9.2 +4 18.5 + 15.7 + 11.4 +
4Z\x 24.2 + 20.5 + 14.9 +5 31.3 + 26.5 + 19.4 +6 48.8 + 41.3 + 30.1 +8 97.9 + 82.9 + 60.5 +
10 173.4 + 146.9 + 107.2 +12 254.8 + 215.9 + 157.5 +
14 † 327.3 + 277.3 + 202.3 +16 † 429.0 + 363.5 + 265.2 +18 † 544.4 + 461.3 + 336.5 +20 † 673.5 + 570.7 + 416.3 +24 † 973.0 + 824.4 + 601.4 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability.
1-61
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
XL Fittings and CouplingsStyle XL100/XL77/XL79 90° – 1Z\xD Elbows and Couplings
90° – 1Z\xD Elbows and Couplings
STYLE XL100/XL77/XL79Refer to publication 07.07
Style XL77 Coupling and XL Fitting
Style XL79 Coupling and XL Fitting
90° – 1Z\xD ELBOWS AND COUPLINGS
Nom. Size
XL100/XL77 System 1 Fitting and 2 Complete
Couplings With Grade “E” or “T” Gasket
XL100/XL79 System 2 Fittings and 1 Complete
Coupling With Grade “E” or “T” Gasket SPARE PARTS
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Plated Bolt and Nut
Size Inches
3 23.7 $324.50 32.0 $361.00 Z\x x 2C\v
4 37.9 472.50 50.7 531.50 B\, x 3Z\v
5 55.5 940.00 74.5 1255.00 C\v x 4Z\v
6 70.7 1064.50 101.9 1388.50 C\v x 4Z\v
8 93.6 2164.50 189.2 3127.00 M\, x 510 133.2 4047.00 268.3 6136.00 1 x 612 171.2 4346.50 375.3 6467.00 1 x 6Z\x
NOTE: See the Spare Parts section for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style XL110/XL77/XL79 45° – 1Z\xD Elbows and Couplings
45° – 1Z\xD Elbows and Couplings
STYLE XL110/XL77/XL79Refer to publication 07.07
Style XL77 Coupling and XL Fitting
Style XL79 Coupling and XL Fitting
45° – 1Z\xD ELBOWS AND COUPLINGS
Nom. Size
XL110/XL77 System 1 Fitting and 2 Complete
Couplings With Grade “E” or “T” Gasket
XL110/XL79 System 2 Fittings and 1 Complete
Coupling With Grade “E” or “T” Gasket SPARE PARTS
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Plated Bolt and Nut
Size Inches
3 19.4 $307.00 23.4 $326.00 Z\x x 2C\v
4 29.8 415.00 34.5 416.50 B\, x 3Z\v
5 44.4 794.00 52.3 962.00 C\v x 4Z\v
6 61.4 903.50 83.3 1065.50 C\v x 4Z\v
8 93.6 1512.50 116.6 1823.00 M\, x 510 133.2 3344.00 161.9 4730.00 1 x 612 171.2 3845.00 221.7 5464.00 1 x 6Z\x
NOTE: See the Spare Parts section for pricing and availability.
Style XL100/XL77/XL79 90° – 3D Elbows and Couplings
90° – 3D Elbows and Couplings
STYLE XL100/XL77/XL79Refer to publication 07.07
Style XL77 Coupling and XL Fitting
Style XL79 Coupling and XL Fitting
90° – 3D ELBOWS AND COUPLINGS
Nom. Size
XL100/XL77 System 1 Fitting and 2 Complete
Couplings With Grade “E” or “T” Gasket
XL100/XL79 System 2 Fittings and 1 Complete
Coupling With Grade “E” or “T” Gasket SPARE PARTS
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Plated Bolt and Nut
Size Inches
3 35.4 $693.50 55.4 $1099.00 Z\x x 2C\v
4 47.8 1189.50 70.5 1965.50 B\, x 3Z\v
5 89.0 1595.50 141.5 2565.50 C\v x 4Z\v
6 122.4 1952.50 205.3 3165.00 C\v x 4Z\v
8 192.6 2748.00 314.6 4293.50 M\, x 510 336.1 3963.00 637.9 5967.50 1 x 612 526.2 5431.50 911.7 8636.50 1 x 6Z\x
NOTE: See the Spare Parts section for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C1-62
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
Style XL110/XL77/XL79 45° – 3D Elbows and Couplings
45° – 3D Elbows and Couplings
STYLE XL110/XL77/XL79Refer to publication 07.07
Style XL77 Coupling and XL Fitting
Style XL79 Coupling and XL Fitting
45° – 3D ELBOWS AND COUPLINGS
Nom. Size
XL110/XL77 System 1 Fitting and 2 Complete
Couplings With Grade “E” or “T” Gasket
XL110/XL79 System 2 Fittings and 1 Complete
Coupling With Grade “E” or “T” Gasket SPARE PARTS
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Plated Bolt and Nut
Size Inches
3 28.4 $681.50 41.4 $1075.00 Z\x x 2C\v
4 44.8 1144.00 64.5 1875.00 B\, x 3Z\v
5 68.4 1550.00 100.3 2475.00 C\v x 4Z\v
6 109.4 1649.50 179.3 2558.50 C\v x 4Z\v
8 158.6 2387.50 246.6 3573.00 M\, x 510 288.2 3754.00 471.9 5550.00 1 x 612 395.2 4503.00 669.7 6779.00 1 x 6Z\x
NOTE: See the Spare Parts section for pricing and availability.
Style XL100/XL110 90° and 45° 1Z\xD Elbows
90° and 45° 1Z\xD Elbows
STYLE XL100/XL110Refer to publication 07.07
90° AND 45° 1Z\xD ELBOWS
Nom. Size1Z\x D
XL100 90° Elbow1Z\x D
XL110 45° Elbow
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each3 13.3 $133.00 9.0 $115.504 21.1 197.00 13.0 140.005 31.1 523.50 20.0 377.506 44.3 571.00 35.0 409.508 82.3 1363.50 46.0 712.00
10 116.2 2742.00 63.0 2039.0012 166.8 2863.00 90.0 2361.00
Style XL100/XL110 90° and 45° 3D Elbows
90° and 45° 3D Elbows
STYLE XL100/XL110Refer to publication 07.07
90° AND 45° 3D ELBOWS
Nom. Size3D
XL100 90° Elbow3D
XL110 45° Elbow
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each3 25.0 $502.00 18.0 $490.004 31.0 914.00 28.0 869.005 64.6 1179.00 44.0 1133.506 96.0 1459.00 83.0 1156.508 145.0 1946.50 111.0 1586.50
10 301.0 2658.00 218.0 2449.0012 435.0 3947.50 314.0 3018.50
1-63
Grooved IPS Pipe CouplingsSEC
TION
1
GR
OO
VED IP
S PIP
E C
OU
PLIN
GS
VICTAULIC.COM PL2016-GENERAL-C
Style XLXL77/XL79 Couplings
Couplings
STYLE XL77/XL79Refer to publication 07.07
Style XL77 Coupling
Style XL79 Coupling
XL COUPLINGS
Nom. Size
XL77 Fitting-to-Pipe
Coupling Complete With Grade “E” or “T” Gasket
XL79 Fitting-to-Fitting
Coupling Complete With Grade “E” or “T” Gasket SPARE PARTS
Inches
Aprx. Wgt. Ea.
Lbs Price Each
Aprx. Wgt. Ea.
Lbs Price Each
Plated Bolt and Nut
Size Inches
3 5.2 $96.50 5.4 $96.50 Z\x x 2C\v
4 8.4 138.50 8.5 138.50 B\, x 3Z\v
5 12.2 209.00 12.3 209.00 C\v x 4Z\v
6 13.2 247.50 13.3 247.50 C\v x 4Z\v
8 23.8 401.00 24.6 401.00 M\, x 510 35.1 653.00 35.9 653.00 1 x 612 40.6 742.50 41.7 742.50 1 x 6Z\x
NOTE: See the Spare Parts section for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 62 90° Extra Heavy “ES” EndSeal Elbow, No. 63 45° Extra Heavy “ES” EndSeal Elbow, No. 64 Extra Heavy “ES” EndSeal Tee
Extra Heavy “ES” Endseal® Fittings
Elbows and TeesRefer to publication 07.03
No. 62
No. 63
No. 64
ELBOWS AND TEES – 90° ELBOW, 45° ELBOW, OR TEE
Pipe Inches 90° Elbow No. 62 45° Elbow No. 63 Tee No. 64
Nominal Size Actual SizePrice Each
Painted Painted Painted2 (d) 2.375 + + +2Z\x 2.875 + + +
3 3.500 + + +4 4.500 + + +6 6.625 + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
For sizes to 12”, contact Victaulic. Steel Full Flow Elbows available with longer center to end dimensions. Contact Victaulic for details.
VICTAULIC.COM PL2016-GENERAL-C1-64
Grooved IPS Pipe CouplingsSE
CTI
ON
1
GR
OO
VED
IP
S P
IPE
CO
UPLI
NG
S
SECTION 2 – Cut Grooved Fittings for Rubber
Cut Grooved Fittings for Rubber
2-1VICTAULIC.COM PL2016-GENERAL-C
No. 12 – 22Z\x°, No. 13 – 11Z\v°
Cut Grooved Fittings for Rubber
ElbowsRefer to publication 07.01
No. 12
No. 13
ELBOWS – 22Z\x° ELBOW OR 11Z\v° ELBOW
Nom. Size 22Z\x° Elbow No. 12 11Z\v° Elbow No. 13
Inches
Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each
Painted Galv. Painted Galv.1 0.6 ‡ 3.25 $170.50 $207.50 0.3 (sw) 1.38 - -
1Z\v 0.8 1.75 - - 0.5 (sw) 1.38 - -
1Z\x 0.8 1.75 - - 0.5 (sw) 1.38 - -2 1.4 ‡ 3.75 181.50 221.00 1.0 1.38 - -
2Z\x 2.3 ‡ 4.00 - - 1.5 1.50 - -3 3.1 ‡ 4.50 191.00 253.00 2.1 1.50 - -
3Z\x 4.0 (sw) 2.50 - - 2.7 (sw) 1.75 - -4 5.6 2.88 - - 3.6 1.75 - -5 7.8 (sw) 2.88 740.00 928.00 5.0 (sw) 2.00 $721.50 $872.506 12.2 ‡ 6.25 875.50 1130.00 7.0 2.00 - -8 20.0 ‡ 7.75 1791.00 2253.50 10.1 2.00 - -
10 30.0 (sw) 4.38 2416.00 3062.00 11.8 2.13 1849.50 2221.5012 40.0 (sw) 4.88 2580.50 3361.50 29.3 2.25 2133.50 2737.00
Cut grooved fittings are non-cancellable and non-returnable.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
‡ Gooseneck design.
No. 20 Tee, No. 29M Tee with Threaded Branch
TeesRefer to publication 07.01
No. 20
No. 29M
TEES – TEE OR TEE WITH THREADED BRANCH
Nom. SizeAprx.
Wgt. Ea.Tee
No. 20
Tee with Male Threaded
Branch No. 29M
Inches LbsPrice Each Price Each
Painted Galv. Painted Galv.C\v 0.6 - - - -1 1.0 - - - -
1Z\v 1.5 - - - -
1Z\x 2.0 - - - -2 3.0 - - - -
2Z\x 4.3 - - - -3 6.8 - - - -
3Z\x 7.9 (sw) $483.00 $614.00 - -4 11.9 - - - -
4Z\x 15.0 (sw) - - - -5 17.8 - - $3644.50 -6 25.7 - - 3564.50 $4036.508 47.6 - - - -
10 99.0 - - - -12 133.0 2953.00 5027.50 - -
Cut grooved fittings are non-cancellable and non-returnable.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2016-GENERAL-C2-2
Cut Grooved Fittings for RubberSE
CTI
ON
2
CUT
GR
OO
VED
FIT
TIN
GS
FO
R R
UB
BER
No. 35 Cross, No. 33 True Y
Cross and WyeRefer to publication 07.01
No. 35
No. 33
CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE Y
Nom. SizeSteel Cross (sw)
No. 35Steel 90 True Y (sw)
No. 33
Inches
Aprx Wgt. Ea.
Lbs
Price Each Aprx Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.C\v 0.9 $783.00 $817.00 0.7 - -1 1.3 783.00 817.00 1.1 $431.00 $498.50
1Z\v 2.1 783.00 926.00 1.5 439.50 578.50
1Z\x 2.5 1224.00 1456.00 1.8 511.00 603.502 3.8 - - 2.5 511.00 603.50
2Z\x 6.1 - - 4.3 690.00 827.503 10.5 - - 6.1 877.50 1060.00
3Z\x 11.5 2164.50 2533.50 9.6 - -4 15.8 - - 9.8 1268.50 1547.005 20.0 2128.50 2341.50 15.0 1964.00 2386.506 28.0 2612.00 3247.00 22.3 2371.00 2933.508 48.0 4543.00 5637.50 36.0 3114.00 3934.50
10 121.5 5689.00 7894.50 69.9 4087.00 5415.0012 110.0 8319.50 9856.00 80.0 5173.50 6694.00
Cut grooved fittings are non-cancellable and non-returnable.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
2-3
Cut Grooved Fittings for RubberSEC
TION
2
CUT G
RO
OVED
FITTING
S FO
R R
UB
BER
VICTAULIC.COM PL2016-GENERAL-C
No. 25 Grooved Reducing Tee
Reducing TeeRefer to publication 07.01
No. 25
REDUCING TEE
Size Reducing Tee No. 25Inches Aprx.
Wgt. Each Lbs
Price Each
Run x Branch Painted Galv.1 x 1 x C\v (sw) 1.0 $372.00 $447.00
1Z\v x 1Z\v x 1 (sw) 1.3 372.00 447.00
1Z\x x 1Z\x x C\v (sw) 1.5 372.00 447.001 (sw) 1.5 372.00 447.00
1Z\v (sw) 1.7 372.00 447.002 x 2 x C\v 2.5 - -
1 2.7 - -1Z\v (sw) 1.8 377.00 464.00
1Z\x 3.0 - -
2Z\x x 2Z\x x C\v (sw) 3.9 614.50 755.501 3.8 - -
1Z\v (sw) 4.2 - -
1Z\x 3.9 - -2 4.5 - -
3 x 3 x C\v (sw) 5.7 - -1 6.1 - -
1Z\v (sw) 8.0 991.50 1157.00
1Z\x 6.5 - -2 6.2 - -
2Z\x 6.4 - -4 x 4 x C\v (sw) 8.0 - -
1 7.8 - -1Z\v (sw) 9.6 1197.00 1649.50
1Z\x 10.2 - -2 11.2 - -
2Z\x 11.4 - -3 11.6 - -
5 x 5 x 1 (sw) 14.0 915.50 1184.501Z\x (sw) 14.3 915.50 1184.50
2 (sw) 14.5 960.50 1241.502Z\x 15.2 - -
3 16.6 - -4 16.7 - -
6 x 6 x 1 (sw) 23.0 1285.00 1683.001Z\x (sw) 24.0 1285.00 1683.00
2 21.6 - -2Z\x 21.4 - -
3 26.5 - -4 25.0 - -5 23.2 - -
8 x 8 x 1Z\x (sw) 33.0 1782.50 2160.502 (sw) 33.5 2092.00 2766.00
2Z\x (sw) 39.0 2092.00 2768.003 (sw) 33.6 2092.00 2768.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2016-GENERAL-C2-4
Cut Grooved Fittings for RubberSE
CTI
ON
2
CUT
GR
OO
VED
FIT
TIN
GS
FO
R R
UB
BER
Reducing TeeRefer to publication 07.01
No. 25
Size Reducing Tee No. 25Inches Aprx.
Wgt. Each Lbs
Price Each
Run x Branch Painted Galv.8 x 8 x 4 41.8 - -
5 (sw) 34.0 - -6 42.3 - -
10 x 10 x 1Z\x 62.0 $2654.00 $3636.502 (sw) 62.0 3343.50 4583.50
2Z\x (sw) 62.4 3343.50 4583.503 (sw) 60.0 3343.50 4714.504 (sw) 61.0 3237.00 4512.005 (sw) 52.0 2962.00 3874.506 (sw) 59.0 3343.50 4427.008 (sw) 64.7 3343.50 4455.00
12 x 12 x 1 (sw) 77.0 2971.50 4347.002 (sw) 80.0 2971.50 4185.50
2Z\x (sw) 78.0 2971.50 4347.003 (sw) 82.0 4135.50 5823.504 (sw) 80.0 4135.50 5819.005 (sw) 75.0 3166.00 4190.506 (sw) 75.0 4135.50 5441.008 (sw) 80.0 4135.50 5662.00
10 (sw) 84.0 4133.50 5640.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
2-5
Cut Grooved Fittings for RubberSEC
TION
2
CUT G
RO
OVED
FITTING
S FO
R R
UB
BER
VICTAULIC.COM PL2016-GENERAL-C
No. 29T Threaded Reducing Tee
Reducing Tee with Threaded BranchRefer to publication 07.01
No. 29T
REDUCING TEE WITH THREADED BRANCH
Size Reducing Tee No. 29T with Threaded BranchInches Aprx. Wgt. Each
LbsPrice Each
Run x Branch Painted Galv.2 x 2 x C\v 2.5 - -
1 2.7 - -1Z\v (sw) 2.9 $376.00 $475.50
1Z\x (sw) 3.0 - -
2Z\x x 2Z\x x C\v (sw) 3.5 453.00 515.501 (sw) 3.8 - -
1Z\v 3.8 460.00 513.50
1Z\x 3.9 - -2 (sw) 4.5 - -
3 x 3 x C\v (sw) 5.9 721.50 766.501 6.1 - -
1Z\v 6.3 600.50 743.50
1Z\x (sw) 6.5 - -2 (sw) 6.2 - -
2Z\x (sw) 6.4 - -4 x 4 x C\v (sw) 7.2 957.50 1005.50
1 7.8 - -1Z\v (sw) 8.5 570.00 1692.50
1Z\x 9.2 - -2 11.2 - -
2Z\x 11.4 - -3 11.6 - -
5 x 5 x 2 (sw) 14.5 1326.50 1202.502Z\x (sw) 15.2 - -
3 (sw) 16.6 1326.50 1226.004 (sw) 16.7 1326.50 1297.00
6 x 6 x 1 (sw) 23.0 1303.00 1695.501Z\x (sw) 25.0 1303.00 1695.50
2 21.6 - -2Z\x 21.4 - -
3 26.5 - -4 25.0 - -5 23.2 1326.50 1740.00
8 x 8 x 2 (sw) 33.5 1806.50 2388.503 (sw) 33.6 1806.50 2388.50
4 41.8 - -5 (sw) 34.0 2527.00 3201.50
6 42.3 - -10 x 10 x 2 (sw) 62.0 2605.00 3566.00
3 (sw) 60.0 2931.50 3669.504 (sw) 61.0 3015.50 3775.005 (sw) 52.0 3568.50 4257.006 (sw) 59.0 - 4031.008 (sw) 64.7 - -
12 x 12 x 3 (sw) 80.0 3290.00 4658.504 (sw) 82.0 3039.00 4442.005 (sw) 75.0 - -6 (sw) 75.0 3290.00 4658.508 (sw) 80.0 - -
10 (sw) 84.0 - -
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2016-GENERAL-C2-6
Cut Grooved Fittings for RubberSE
CTI
ON
2
CUT
GR
OO
VED
FIT
TIN
GS
FO
R R
UB
BER
No. 30 Lateral
LateralRefer to publication 07.01
No. 30
LATERAL
Nom. Size 45° Lateral No. 30
Inches
Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv.C\v 1.0 (sw) $285.50 $323.501 1.7 (sw) - -
1Z\v 2.5 311.50 408.00
1Z\x 3.5 (sw) 361.50 497.502 4.6 (sw) - -
2Z\x 9.0 (sw) 561.00 731.503 11.7 - -
3Z\x 17.8 (sw) - -4 17.9 - -5 21.8 (sw) 1790.50 2250.506 43.6 (sw) - -8 72.0 (sw) 3374.50 4580.00
10 105.0 (sw) 4728.50 6421.0012 165.0 (sw) 6311.00 8839.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
No. 30R Reducing Lateral
Reducing LateralsRefer to publication 07.01
No. 30R
REDUCING LATERALS
Nominal Size Reducing Laterals No. 30R †
Inches
Aprx. Wgt. Each
Lbs
Price Each
Painted Galv.3 x 3 x 2 9.8 $863.50 $1007.00
2Z\x 9.8 863.50 1081.504 x 4 x 2 10.0 974.50 1209.50
2Z\x 10.0 1100.50 1351.003 18.3 1221.00 1578.50
5 x 5 x 2 24.0 1204.50 1731.503 27.0 1499.50 1996.504 26.5 1683.50 2195.50
6 x 6 x 3 37.0 1693.00 2326.504 36.5 1882.00 2533.005 44.7 2106.50 2879.50
8 x 8 x 4 62.0 2667.00 3708.005 75.5 2926.50 4158.506 82.0 3112.00 4438.00
10 x 10 x 4 104.8 3412.50 4995.505 99.0 - 5233.506 105.8 3866.50 5519.508 118.0 4073.50 6226.50
12 x 12 x 4 135.0 4671.00 6725.005 122.0 - 6754.506 137.0 4834.50 6950.008 147.0 5237.00 7514.50
10 167.0 5996.00 8588.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† All No. 30R fittings are segmentally welded steel.
2-7
Cut Grooved Fittings for RubberSEC
TION
2
CUT G
RO
OVED
FITTING
S FO
R R
UB
BER
VICTAULIC.COM PL2016-GENERAL-C
No. 32 Tee Wyes
Tee WyesRefer to publication 07.01
No. 32
TEE WYES
Nominal Size Tee Wye No. 32 †
Inches
Aprx. Wgt. Each
Lbs
Price Each
Painted Galv.2 x 2 x 2 6.4 $965.00 $1153.00
2Z\x x 2Z\x x 2Z\x 11.5 1230.50 1507.503 x 3 x 3 14.3 1577.50 1952.00
3Z\x x 3Z\x x 3Z\x 22.9 - -4 x 4 x 3 23.0 1668.00 2121.50
4 26.0 2112.50 2765.505 x 5 x 3 29.0 1931.50 2437.50
4 36.7 2367.50 3005.005 48.0 3187.00 4020.00
6 x 6 x 3 37.3 2115.50 2811.504 46.3 2561.00 3366.005 55.0 3409.50 4421.506 60.5 3543.50 4637.00
8 x 8 x 3 76.0 - -4 76.4 3306.00 4546.005 85.6 4190.00 5637.006 112.0 4368.50 5026.508 127.1 5536.50 7606.50
10 x 10 x 3 96.0 3553.50 4933.004 97.4 4098.00 5497.505 115.1 5097.00 6656.506 133.1 5037.50 7060.008 156.0 6175.50 8579.00
10 190.0 8203.00 11090.5012 x 12 x 12 240.0 11324.00 15037.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† All No. 32 fittings are segmentally welded steel.
No(s). 45 and 46 Flanged Adapter Nipples
Flanged Adapter NipplesRefer to publication 07.01
Nos. 45 & 46
FLANGED ADAPTER NIPPLES – NO. 45 – 150 LB AND NO. 46 – 300 LB
Size x Length No. 45 – 150 lb No. 46 – 300 lb Inches Black Galv. Black Galv.
C\v x 3 - - - -1 x 3 $639.50 $750.50 - -1 x 4 - - - -
1Z\v x 4 667.00 785.00 - -
1Z\x x 4 668.50 788.50 - -2 x 4 679.50 832.50 - -
2Z\x x 4 918.50 1130.00 - -3 x 4 933.00 1164.00 - -
3Z\x x 4 1143.00 - - -4 x 6 1348.00 1718.50 - -5 x 6 1939.50 2418.00 - -6 x 6 1970.00 2524.50 - -8 x 6 2606.00 3423.00 - -
10 x 8 3461.00 4820.50 - -12 x 8 4833.00 9105.50 - -
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C2-8
Cut Grooved Fittings for RubberSE
CTI
ON
2
CUT
GR
OO
VED
FIT
TIN
GS
FO
R R
UB
BER
SECTION 3 – Hole Cut Products
Hole Cut Products
3-1VICTAULIC.COM PL2016-GENERAL-C
Styles 920/920N Female Threaded Mechanical-T Outlet
Mechanical-T Outlet
STYLES 920/920NRefer to publication 11.02
Style 920 Female
STYLE 920 – FEMALE THREADED BRANCH
Size StyleCOMPLETE MECHANICAL-T Female Threaded Branch † Spare Parts
Inches Run x Brch. Number
Aprx. Wgt. Ea.
Lbs
Price EachBolts & Nuts
Size Inches
Standard Grade “E”
or “T” GasketsPainted Galv.
2 x Z\x 920N 3.1 $117.50 $157.50 Z\x x 2C\v $26.50
C\v 920N 3.1 117.50 157.50 Z\x x 2C\v 26.501 920N 3.0 117.50 157.00 Z\x x 2C\v 26.50
1Z\v 920N 3.5 139.00 182.50 Z\x x 2C\v 43.00
1Z\x 920N 3.6 139.00 190.50 Z\x x 2C\v 43.00
2Z\x x Z\x 920N 3.0 132.00 172.00 Z\x x 2C\v 26.50
C\v 920N 3.0 132.00 172.00 Z\x x 2C\v 26.501 920N 2.9 132.00 171.00 Z\x x 2C\v 26.50
1Z\v 920N 3.5 180.00 233.50 Z\x x 3Z\v 43.00
1Z\x 920N 3.6 180.00 233.00 Z\x x 3 43.003 x Z\x 920N 3.4 147.50 189.00 Z\x x 2C\v 26.50
C\v 920N 3.4 152.50 192.00 Z\x x 2C\v 26.501 920N 3.3 152.50 187.50 Z\x x 2C\v 26.50
1Z\v § 920N 3.8 205.00 280.50 Z\x x 2C\v 43.00
1Z\x § 920N 4.1 205.00 277.50 Z\x x 2C\v 43.002 § 920N 4.9 240.00 319.00 Z\x x 3Z\v 45.50
4 x Z\x 920N 3.7 180.00 231.50 Z\x x 2C\v 26.50
C\v 920N 3.7 180.00 229.00 Z\x x 2C\v 26.501 920N 3.6 180.00 229.00 Z\x x 2C\v 26.50
1Z\v 920N 4.0 244.50 327.50 Z\x x 2C\v 43.00
1Z\x 920N 4.2 244.50 327.50 Z\x x 2C\v 43.002 920N 5.0 244.50 331.50 Z\x x 2C\v 45.50
2Z\x 920 5.8 256.50 349.00 1 x 2C\v 48.003 920 8.4 277.00 393.00 1 x 3Z\v 48.50
5 x 1Z\x 920 7.7 303.50 420.00 B\, x 4C\v 43.002 920 8.2 314.50 432.50 B\, x 4C\v 45.50
2Z\x 920 8.3 335.50 461.00 B\, x 4C\v 48.003 920 8.4 360.50 491.00 B\, x 4C\v 48.50
6 x 1Z\v 920N – – – Z\x x 2C\v 43.00
1Z\x 920N 5.1 302.50 418.50 Z\x x 2C\v 43.002 920N 5.6 334.00 418.00 Z\x x 2C\v 45.50
2Z\x 920 7.6 323.00 446.50 B\, x 4C\v 48.003 920 8.4 334.00 459.50 B\, x 4C\v 48.504 920 10.1 366.50 513.00 B\, x 4C\v 64.50
8 x 2 920 11.6 469.00 644.00 C\v x 4Z\v 48.00
2Z\x 920 11.6 469.00 644.00 C\v x 4Z\v 48.003 920 12.6 469.00 653.50 C\v x 4Z\v 48.504 920 15.3 579.50 805.00 C\v x 4Z\v 64.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
* Supplied with British Standard Threads only, unless ordered otherwise.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
VICTAULIC.COM PL2016-GENERAL-C3-2
IPS Hole Cut ProductsSE
CTI
ON
3
IPS
HO
LE C
UT
PR
OD
UC
TS
Styles 920/920N Grooved Mechanical-T Outlet
Mechanical-T Outlet
STYLES 920/920NRefer to publication 11.02
Style 920 Grooved
STYLE 920 – GROOVED BRANCH
Size StyleCOMPLETE MECHANICAL-T
Grooved Branch Spare Parts
Inches Run x Brch. Number
Aprx. Wgt. Ea.
Lbs
Price EachBolts & Nuts
Size Inches
Standard Grade “E”
or “T” GasketsPainted Galv.
2 x 1 920N – – – – $26.501Z\v 920N 3.5 $139.00 $182.50 Z\x x 2C\v 43.00
1Z\x 920N 3.2 139.00 190.50 Z\x x 2C\v 43.00
2Z\x x 1 920N – – – – 26.501Z\v 920N 3.2 180.00 233.50 Z\x x 3Z\v 43.00
1Z\x 920N 3.3 180.00 233.00 Z\x x 3 43.003 x 1 920N – – – – 26.50
1Z\v § 920N 3.7 205.00 279.00 Z\x x 2C\v 43.00
1Z\x § 920N 3.8 205.00 277.50 Z\x x 2C\v 43.002 § 920N 3.5 240.00 326.50 Z\x x 3Z\v 45.50
3Z\x x 2 920N 5.0 343.50 476.00 Z\x x 2C\v 45.504 x 1 920N – – – – 26.50
1Z\v 920N 3.6 244.50 326.50 Z\x x 2C\v 43.00
1Z\x 920N 3.9 244.50 327.50 Z\x x 2C\v 43.002 920N 4.6 244.50 331.50 Z\x x 2C\v 45.50
2Z\x 920 5.0 256.50 349.00 Z\x x 2C\v 48.003 920 6.4 277.00 393.00 Z\x x 3Z\v 48.50
5 x 1Z\x 920 7.6 303.50 420.00 B\, x 4C\v 43.002 920 8.0 314.50 432.50 B\, x 4C\v 45.50
2Z\x 920 7.9 335.50 461.00 B\, x 4C\v 48.003 920 8.8 360.50 491.00 B\, x 4C\v 48.50
6 x 1Z\v 920N 4.8 302.50 418.50 Z\x x 2C\v 43.00
1Z\x 920N 5.1 302.50 418.50 Z\x x 2C\v 43.002 920N 5.6 334.00 418.00 Z\x x 2C\v 45.50
2Z\x 920 8.3 323.00 446.50 B\, x 4C\v 48.003 920 9.9 334.00 459.50 B\, x 4C\v 48.504 920 10.1 366.50 513.00 B\, x 4C\v 64.50
8 x 2 920 11.4 469.00 + C\v x 4Z\v +
2Z\x 920 11.6 469.00 644.00 C\v x 4Z\v 48.003 920 11.6 469.00 653.50 C\v x 4Z\v 48.504 920 12.5 579.50 805.00 C\v x 4Z\v 64.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
3-3
IPS Hole Cut ProductsSEC
TION
3
IPS
HO
LE CU
T PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
Styles 920/920N Mechanical-T Cross
Mechanical-T Cross
STYLE 920/920N *Refer to publication 11.03
The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T outlets are available with either grooved or female threaded outlets. Your choice must be specified on each order.STYLES 920/920N – MECHANICAL-T CROSS
Nominal Size Inches Style
COMPLETE MECHANICAL-T Cross with “E” or “T” Gasket †
Run x BranchNumber Painted Galv. A B
2 x 2 x Z\x x Z\x 920N $173.00 $232.50
Z\x x C\v 920N 173.00 232.50
Z\x x 1 920N 173.00 232.50
Z\x x 1Z\v 920N 207.50 283.50
Z\x x 1Z\x 920N 207.50 283.50
C\v x C\v 920N 173.00 232.50
C\v x 1 920N 173.00 207.50
C\v x 1Z\v 920N 307.50 372.50
C\v x 1Z\x 920N 265.50 311.501 x 1 920N 173.00 232.501 x 1Z\v 920N 207.50 254.001 x 1Z\x 920N 207.50 283.50
1Z\v x 1Z\v 920N 207.50 283.50
1Z\x x 1Z\v 920N 207.50 283.50
1Z\x x 1Z\x 920N 207.50 283.50
2Z\x x 2Z\x x Z\x x Z\x 920N 194.00 194.00
Z\x x C\v 920N 194.00 227.00
Z\x x 1 920N 194.00 227.00
Z\x x 1Z\v 920N 265.50 311.50
Z\x x 1Z\x 920N 265.50 283.50
C\v x C\v 920N 194.00 227.00
C\v x 1 920N 194.00 227.00
C\v x 1Z\v 920N 265.50 311.50
C\v x 1Z\x 920N 265.50 283.501 x 1 920N 194.00 227.001 x 1Z\v 920N 265.50 311.501 x 1Z\x 920N 265.50 254.00
1Z\v x 1Z\v 920N 265.50 311.50
1Z\x x 1Z\v 920N 265.50 311.50
1Z\x x 1Z\x 920N 265.50 283.503 x 3 x Z\x x Z\x 920N 219.00 254.50
Z\x x C\v 920N 227.00 254.50
Z\x x 1 920N 307.50 368.50
Z\x x 1Z\v § 920N 307.50 372.50
Z\x x 1Z\x § 920N 307.50 368.50
Z\x x 2 § 920N 356.50 424.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 21.03, or contact Victaulic for details. ‡ Available grooved only.
VICTAULIC.COM PL2016-GENERAL-C3-4
IPS Hole Cut ProductsSE
CTI
ON
3
IPS
HO
LE C
UT
PR
OD
UC
TS
Nominal Size Inches Style
COMPLETE MECHANICAL-T Cross with “E” or “T” Gasket †
Run x BranchNumber Painted Galv. A B
3 x 3 x C\v x C\v 920N $227.00 $254.50
C\v x 1 920N 307.50 368.50
C\v x 1Z\v 920N 307.50 372.50
C\v x 1Z\x 920N 307.50 368.50
C\v x 2 920N 356.50 424.501 x 1 920N 227.00 254.501 x 1Z\v 920N 307.50 307.501 x 1Z\x 920N 307.50 372.501 x 2 920N 356.50 424.50
1Z\v x 1Z\v § 920N 307.50 372.50
1Z\x x 1Z\v § 920N 307.50 372.50
1Z\x x 1Z\x § 920N 307.50 368.502 x 1Z\v § 920N 356.50 424.502 x 1Z\x 920N 356.50 424.502 x 2 § 920N 356.50 424.50
4 x 4 x Z\x x Z\x 920N 265.50 307.50
Z\x x C\v 920N 265.50 307.50
Z\x x 1 920N 265.50 307.50
Z\x x 1Z\v 920N 364.00 436.50
Z\x x 1Z\x 920N 364.00 436.50
Z\x x 2 920N 364.00 436.50
C\v x C\v 920N 265.50 307.50
C\v x 1 920N 265.50 307.50
C\v x 1Z\v 920N 364.00 436.50
C\v x 1Z\x 920N 364.00 436.50
C\v x 2 920N 364.00 436.501 x 1 920N 265.50 307.501 x 1Z\v 920N 364.00 436.501 x 1Z\x 920N 364.00 436.501 x 2 920N 364.00 436.50
1Z\v x 1Z\v 920N 364.00 436.50
1Z\x x 1Z\v 920N 364.00 436.50
1Z\x x 1Z\x 920N 364.00 436.502 x 1Z\v 920N 364.00 436.502 x 1Z\x 920N 364.00 436.502 x 2 920N 364.00 436.50
2Z\x x 2Z\x 920 383.50 521.503 x 2Z\x 920 412.00 525.003 x 3 920 412.00 525.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 21.03, or contact Victaulic for details. ‡ Available grooved only.
3-5
IPS Hole Cut ProductsSEC
TION
3
IPS
HO
LE CU
T PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
Nominal Size Inches Style
COMPLETE MECHANICAL-T Cross with “E” or “T” Gasket †
Run x BranchNumber Painted Galv. A B
5 x 5 x 1Z\x x 1Z\x 920 $536.00 $640.502 x 1Z\x 920 469.00 641.002 x 2 920 469.00 577.00
2Z\x x 1Z\x 920 538.50 641.00
2Z\x x 2 920 538.50 641.00
2Z\x x 2Z\x 920 538.50 641.003 x 1Z\x 920 537.00 641.003 x 2 920 537.00 641.003 x 2Z\x 920 537.00 641.003 x 3 920 537.00 641.00
6 x 6 x 1Z\v ‡ x 1Z\v ‡ 920N 452.00 560.50
1Z\x x 1Z\v ‡ 920N 452.00 560.50
1Z\x x 1Z\x 920N 452.00 560.502 x 1Z\x 920N 496.00 606.002 x 2 920N 496.00 606.00
2Z\x x 2Z\x 920 481.50 577.503 x 2Z\x 920 496.00 606.003 x 3 920 496.00 606.004 x 2Z\x 920 546.50 685.004 x 3 920 546.50 685.004 x 4 920 546.50 685.00
8 x 8 x 2 x 2 920 700.00 861.502Z\x x 2 920 700.00 861.50
2Z\x x 2Z\x 920 700.00 861.503 x 2Z\x 920 700.00 861.503 x 3 920 700.00 861.504 x 2Z\x 920 866.00 1042.004 x 3 920 866.00 1042.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 21.03, or contact Victaulic for details. ‡ Available grooved only.
VICTAULIC.COM PL2016-GENERAL-C3-6
IPS Hole Cut ProductsSE
CTI
ON
3
IPS
HO
LE C
UT
PR
OD
UC
TS
Style 923 Strapless Outlet
Strapless Outlet
STYLE 923Refer to publication 11.05
4 – 8”
10” – Up
STRAPLESS OUTLET – WITH GRADE “E” OR “T” GASkET
Nominal SizeCOMPLETE STRAPLESS OUTLET
With “E” or “T” Gasket *
InchesAprx. Wgt. Per Unit
LbsPrice
Per Unit4 – 8 x Z\x NPT IPS 2.28 $310.004 – 8 x C\v NPT IPS 2.28 310.0010 and larger x Z\x NPT IPS 2.16 310.0010 and larger x C\v NPT IPS 2.16 310.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style 924 Thermometer Outlet
Thermometer Outlet
STYLE 924Refer to publication 11.06
4 – 8”
10” – up
THERMOMETER OUTLET – WITH GRADE “E” GASkET
Nominal SizeCOMPLETE THERMOMETER OUTLET
With “E” or “T” Gasket
Inches
Aprx. Wgt. Per Unit
LbsPrice
Per Unit4 – 8 for 6 Stem # 3.78 $491.5010 Flat for 6 Stem # 3.78 491.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
# Thermometer Outlet is internally threaded to 1Z\v - 18 NEF 2B.
3-7
IPS Hole Cut ProductsSEC
TION
3
IPS
HO
LE CU
T PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
Style 931 Vic-Tap II
Vic-Tap II
STYLE 931 MECHANICAL-T AND BALL VALVE
for use with the Vic-Tap II Hole Cutting Tool
Vic-Tap II Style 931 is a bolted branch connection with a full port ball valve permitting tapping pressur-ized systems up to 500 psi. The ductile iron housing has hardened steel teeth set into the housing which grip the pipe as bolts are tightened. Two standard gaskets are available: Grade “E” EPDM or Grade “T” nitrile. Specify choice on order.
Various outlet sizes can be obtained from the standard 2Z\x” size down using reducers. See Section 12 – Pipe Preparation Tools for compatible Vic-Tap Hole Cutting Tool information.
SizeComplete Vic-Tap II Assembly with Complete Mechanical-T
Grade “E” or “T” Gasket and Ball Valve
Run x BranchAprx. Wgt.
Lbs List Price4 x 2Z\x 12.0 $5895.005 x 2Z\x 13.0 5895.006 x 2Z\x 14.0 5895.008 x 2Z\x 15.0 5895.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C3-8
IPS Hole Cut ProductsSE
CTI
ON
3
IPS
HO
LE C
UT
PR
OD
UC
TS
SECTION 4 – Valves and Specialties
Valves and Specialties
4-1VICTAULIC.COM PL2016-GENERAL-C
Series 761 Vic-300 MasterSeal™ Butterfly Valve
Grooved IPS ValvesVic-300 MasterSeal™ Butterfly Valve
SERIES 761
300 psi WP EPDM “E”, Nitrile “T”, or Viton Fluoroelastomer “O” Seat Ductile Iron Nickel Coated, Aluminum Bronze or Stainless Steel DiscRefer to publication 08.20. Specify seat material, disc/stem material and operator when ordering. For power actuation, contact Victaulic for your nearest authorized valve actuation centre.
Gear Operator 10-Position Handle
FIGURE NO. CONFIGURATION: PRODUCT SIZE CODE SERIES BODY DISC/STEM SEAT OPERATOR
V - XXX - 76 - 1 - S - E - ZZValve See Below 761 Ductile Iron
D.I./SS, Al Brz/SS, or
SS/SS“E”, “T”, or “O” See Below
V XXX 76 1 S, B or X E, T, or O ZZ
Example: V-040-76-1-S-E-3 is a 4-inch with “E” EPDM Seat and Aluminum Gear Operator
Nominal Size Inches 2” 2Z\x” 3” 4” 5” 6” 8” 10” 12”Size Code XXX 020 024 030 040 050 060 080 100 120
BARE VALVES ZZ Bare - Price EachEPDM “E” Seat V - XXX - 76 - 1 - S - E - 00 00 $812.00 $1060.50 $1118.50 $1695.00 $2449.00 $2539.00 $3291.50 $4775.00 $6164.50
Nitrile “T” Seat V - XXX - 76 - 1 - S - T - 00 00 812.00 1060.50 1118.50 1695.00 2449.00 2539.00 3291.50 4775.00 6164.50
Viton “O” Seat V - XXX - 76 - 1 - S - O - 00 00 966.00 1229.50 1320.50 1959.00 2732.00 2989.00 3905.00 5417.50 6958.00
Approx. Weight Each Lbs 3.5 5.0 6.0 9.3 16.8 20.0 34.3 72.0 88.0Valves Complete With Operator - “E” EPDM or “T” Nitrile Seat - D.I. Nickel Coated Disc
With 10-Position Handle ZZ Complete Valve - Price Each10-Position handle with Memory Stop
2 $1076.50 $1324.00 $1382.50 $1906.00 $2712.50 $2924.50 $3671.00 $6263.50 $7006.00
10-Position handle Tamperproof 4 1224.50 1473.00 1531.50 2054.00 2862.00 3073.50 3821.50 N/A N/AApprox. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 84.0 100.0
With Gear Operator (Alum. Hsg.) ZZ Complete Valve - Price EachGear Operator 3 $2252.50 $2536.50 $2602.50 $2940.00 $3742.00 $4264.00 $4707.00 $6263.50 $7713.50
Approx. Weight Each Lbs 5 6.0 7.5 8.5 11.8 20.8 24.0 38.3 81.5 97.5Gear Operator with Memory Stop 5 $2460.00 $2745.50 $2811.00 $3147.00 $3950.00 $4524.50 $5012.00 $6439.50 $7996.50Gear Operator with Chain Wheel 6 2917.50 3201.50 3267.00 3603.50 4405.50 5588.00 6031.00 8031.50 9591.00Gear Operator with Mem. and Chain Wheel 7 3125.50 3409.50 3474.00 3811.50 4614.50 5848.50 6335.50 8315.00 9872.50
AWWA Gear Operator with 2” Sq. AWWA Nut 8 + + + + + + + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
N/A - Not available.
Specify seat material, disc/stem material and operator when ordering.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C4-2
Grooved IPS Pipe ValvesSE
CTI
ON
4
GR
OO
VED
IP
S P
IPE
VA
LVE
S
Nominal Size Inches 2” 2Z\x” 3” 4” 5” 6” 8” 10” 12”Size Code XXX 020 024 030 040 050 060 080 100 120
Valves Complete With Operator - “E” EPDM or “T” Nitrile Seat - Aluminum Bronze Disc/SS StemsWith 10-Position Handle ZZ Complete Valve - Price Each
10-Position handle with Memory Stop 2 $1279.00 $1628.50 $1889.50 $2586.50 $3873.00 $4688.00 N/A N/A N/A
10-Position handle Tamperproof 4 1428.00 1778.50 2039.00 2735.50 4021.50 4836.00 N/A N/A N/AApprox. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 84.0 100.0
With Gear Operator (Alum. Hsg.) ZZ Complete Valve - Price EachGear Operator 3 $2493.00 $2841.50 $3110.50 $3265.50 $4895.50 $5723.50 + + +
Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.8 24.0 38.3 81.5 97.5Valves Complete With Operator - “E” EPDM or “T” Nitrile Seat - Stainless Steel Disc/Stems
With 10-Position Handle ZZ Complete Valve - Price Each10-Position handle with Memory Stop 2 $1807.50 $2200.50 $2266.50 $2820.00 $4174.00 $4771.50 $7224.00 $11432.00 $13678.00
10-Position handle Tamperproof 4 1957.00 2350.00 2414.50 2967.50 4323.00 4921.00 7372.00 N/A N/AApprox. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 84.0 100.0
With Gear Operator (Alum. Hsg.) ZZ Complete Valve - Price EachGear Operator 3 $2982.50 $3414.50 $3486.00 $3852.50 $5203.50 $6111.00 $8259.50 $11432.00 $14385.50
Approx. Weight Each Lbs 6 7.5 8.5 11.8 20.8 24.0 38.3 81.5 97.5Valves Complete With Operator - “O” Viton Fluoroelastomer Seat - D.I. Nickel Coated Disc.
With 10-Position Handle ZZ Complete Valve - Price Each10-Position handle with Memory Stop 2 $1234.00 $1496.50 $1587.00 $2172.50 $4025.00 $3380.50 $4289.00 $6924.50 +
10-Position handle Tamperproof 4 1364.50 1624.50 1714.00 2291.00 4119.00 3482.50 4379.50 N/A N/AApprox. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 84.0 100.0
With Gear Operator (Alum. Hsg.) ZZ Complete Valve - Price EachGear Operator 3 $2426.00 $2725.50 $2825.00 $3219.50 $4469.50 $4738.00 $5339.00 $6924.50 $8526.00
Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.8 24.0 38.3 81.5 97.5Gear Operator with Memory Stop 5 $2600.50 $2897.00 $2994.00 $3383.00 $4407.00 $4934.00 $5571.00 $7287.50 $9042.00Gear Operator with Chain Wheel 6 3058.00 3352.00 3451.00 3839.50 4862.00 5997.00 6590.50 8944.50 10699.00Gear Operator with Mem. and Chain Wheel 7 3230.50 3560.00 3657.00 4047.50 5070.50 6257.50 6895.00 9237.50 10992.50
AWWA Gear Operator with 2” Sq. AWWA Nut 8 + + + + + + + + +
Valves Complete With Operator - “O” Viton Fluoroelastomer Seat -Aluminum Bronze Disc/SS StemsWith 10-Position ZZ Complete Valve - Price Each
10-Position handle with Memory Stop 2 $1419.00 $1780.00 $2073.00 $2822.50 + $5096.50 N/A N/A N/A
10-Position handle Tamperproff 4 1567.50 1929.00 2185.50 2973.50 + 5245.50 N/A N/A N/AApprox. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 84.0 100.0
With Gear Operator (Alum. Hsg.) ZZ Complete Valve - Price EachGear Operator 3 + + + $3910.50 + $6525.50 + + +
Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.8 24.0 38.3 81.5 97.5
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
N/A - Not available.
Specify seat material, disc/stem material and operator when ordering.
4-3
Grooved IPS Pipe ValvesSEC
TION
4
GR
OO
VED IP
S PIP
E VA
LVES
VICTAULIC.COM PL2016-GENERAL-C
Nominal Size Inches 2” 2Z\x” 3” 4” 5” 6” 8” 10” 12”Size Code XXX 020 024 030 040 050 060 080 100 120
Valves Complete With Operator - “O” Viton Fluoroelastomer Seat - Stainless Steel Disc/StemsWith 10-Position Handle ZZ Complete Valve - Price Each
10-Position handle with Memory Stop 2 $1974.50 $2385.00 $2481.50 $3099.00 $5106.00 $5252.50 $7890.00 + +
10-Position handle Tamperproof 4 2095.50 2500.50 2597.50 3189.00 4945.00 5329.50 7932.00 N/A N/AApprox. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 84.0 100.0
With Gear Operators (Alum. Hsg.) ZZ Complete Valve - Price EachGear Operator 3 $3377.00 $3614.00 $3720.50 $3910.50 $5990.00 $6525.50 $8940.50 $12164.50 $15291.00
Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.8 24.0 38.3 81.5 97.5kits kits - Price Each
Spare Handwheel $95.00 $95.00 $95.00 $95.00 $213.50 $213.50 $213.50 $220.00 $220.00Chain Wheel 729.00 729.00 729.00 729.00 1447.00 1447.00 1447.00 1447.00 1447.00Memory Stop for Gear Operator 720.50 720.50 720.50 720.50 744.00 744.00 744.00 744.00 744.00 Gear Operator 1705.50 1705.50 1705.50 2076.50 2076.50 2076.50 2248.00 2585.50 2585.5010-Position handle with Memory Stop 973.00 973.00 973.00 973.00 1144.00 1144.00 1144.00 + +10-Position handle Tamperproof 1709.00 1709.00 1709.00 1709.00 1831.00 1831.00 1831.00 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
N/A - Not available.
Specify seat material, disc/stem material and operator when ordering.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTES:* Details required with order
Type Series Body Material Disc/Stem Seat OperatorIn./mmSize
Code
V - - -040 76 1 0ES
V 020024761030040108050133139060159165080100120
76 -Iron/IPS 1 - Ductile Iron S - Ductile Iron/416SSB - Aluminum Bronze/ 416SSV - Thermal BarrierX - CF8M/416SS
9 - Special *
E - EPDMT - Lubricated NitrileO - Fluoro- elastomer
9 - Special*
0 - Bare2 - 10-Position handle with memory stop3 - Gear operator4 - Lever lock with tamper resistant device (8"/200 mm)5 - Gear operator with memory stop6 - Gear operator with chain wheel7 - Gear operator with memory stop and chain wheel8 - Gear operator with AWWA 2" square oper. nut
9 - Special*
2/502½/6576.1 mm3/804/100108.0 mm5/125133.0 mm139.7 mm6/150159.0 mm165.1 mm8/20010/25012/300
VICTAULIC.COM PL2016-GENERAL-C4-4
Grooved IPS Pipe ValvesSE
CTI
ON
4
GR
OO
VED
IP
S P
IPE
VA
LVE
S
Series W761 Vic-300 AGS (14 – 24”) 300 psi Butterfly Valve
AGS Vic-300 300 psi Butterfly Valve
SERIES W761Refer to publication 20.06
Series Vic-300 300 psi
AGS SERIES VIC-300 300-PSI BUTTERFLY VALVES
Size
AGS Series Vic-300 Bare Valve ‡
With “E” or “T”
AGS Series Vic-300 With Gear Operator ‡
With “E” or “T”
Actual Inches
Size Code
Aprx. Weight Each Price Each
Aprx. Weight Each Price Each
Lbs 1182-00 Lbs 1182-2014 140 125.0 $10308.50 156.0 $10561.5016 160 153.0 12034.00 201.0 12256.0018 180 199.0 14295.00 217.7 15455.5020 200 285.0 16685.00 384.2 21257.5024 240 451.0 20140.50 605.0 24646.00
Size Gear Operator Options †
Actual Inches
Size Code
Series Vic-300 With Gear Oper. ‡ and
Memory Stop † with “E” or “T”
1582-21
Series Vic-300 With Gear Oper. ‡ and
Chainwheel with “E” or “T”
1582-2214 140 $11395.00 $12410.0016 160 13082.00 14018.0018 180 16283.50 17211.5020 200 22091.00 22597.0024 240 25470.00 25815.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
‡ 2” nut, in lieu of handwheel, available at no additional charge. Specify clearly on order.
† Must be ordered at time of purchase. This option is not designed for field installation.
Gear Operators available with both memory stop and chain wheel - add both adders (1 _ _ _ - 24).
NOTE: When ordered separately, chain wheels and memory stops are non-cancellable and non-returnable.
V - - -180 1 5 20
PressureRating Body
Closure CouplingGasket Grade Bracket Accessories*
*Details required
Act.In./mm
SizeCode
28
Type
00 - Bare20 - Gear operator21 - Gear operator with memory stop22 - Gear operator with chain wheel23 - Gear operator with AWWA square operating nut24 - Gear operator with memory stop and chain wheel29 - Non-std. gear operator*
9 - Special*
0 - No Bracket2 - Standard
9 - Special*
5 - PPS Coated Iron
9 - Special*
3 - 300 psi (3)140160180200240
14/35016/40018/45020/50024/600
V 3 - Iron disc w/fluoro- elastomer Seat/ Stainless Steel stems - "O"7 - Iron disc w/Nitrile Seat/Stainless Steel stems - “T"8 - Iron disc w/EPDM Seat/Stainless Steel stems - "E"
9 - Special*
4-5
Grooved IPS Pipe ValvesSEC
TION
4
GR
OO
VED IP
S PIP
E VA
LVES
VICTAULIC.COM PL2016-GENERAL-C
Series W709 AGS Butterfly Valve
AGS Butterfly Valve
SERIES W709Refer to publication 20.07
SERIES W709 – 150 PSI
Size
Aprx. Weight Each Series W709 with Gear Operator
Actual Inches Lbs Price Each
26 859.8 +28 1024.9 +30 1300.4 +32 1608.9 +36 2159.9 +40 3151.7 +42 3438.2 +46 4430.0 +48 4749.6 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Series 706 (14 – 24”) 300-psi Butterfly Valve
300-psi Butterfly Valve
SERIES 706
Series 706 300 psi
SERIES 706 300-PSI BUTTERFLY VALVES
Size
Aprx. Weight Each
Series 706 Bare Valve
‡ With “E” or
“T”
Series 706 Bare Valve
‡ With “O”
Aprx. Weight Each
Series 706 With Gear
Operator ‡ With “E” or
“T”
Series 706 With Gear
Operator ‡ With “O”
Actual Inches
Size Code Lbs 3182-00 3132-00 Lbs 3182-20 3132-20
14 140 125.0 $12654.00 $15338.50 152.0 $21260.50 $22066.0016 160 153.0 14772.00 21514.00 187.0 26448.50 33192.0018 180 199.0 17546.00 22823.50 257.0 33141.00 38417.5020 200 285.0 20480.50 26781.50 355.0 40955.50 47257.0024 240 451.0 24721.00 35115.50 522.0 57365.50 67758.50
Size Gear Operator Options ‡Actual Inches
Size Code Memory Stop † Chain Wheel
14 140 + $4473.0016 160 + 4473.0018 180 + 4473.0020 200 + 4473.0024 240 + 4473.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
‡ 2” nut, in lieu of handwheel, available at no additional charge. Specify clearly on order.
Important: Series 706 valves must not be used with AGS products. Series W761 Vic-300 AGS butterfly valves and Series W709 butterfly valves must be used on Advanced Groove System (AGS) piping systems.
Gear Operators available with both memory stop and chain wheel - add both adders (1 _ _ _ - 24).
NOTE: When ordered separately, chain wheels and memory stops are non-cancellable and non-returnable.
See AGS Vic-300/Series 706 Valve Figure Numbering Chart on previous page.
Series 700 Butterfly Valve
VICTAULIC.COM PL2016-GENERAL-C4-6
Grooved IPS Pipe ValvesSE
CTI
ON
4
GR
OO
VED
IP
S P
IPE
VA
LVE
S
Butterfly Valve
SERIES 700Refer to publication 08.05
SERIES 700 – 200 PSI
Nominal Size Valve with Two Position Padlockable Handle
InchesSize Code
Aprx. Wgt. Each Lbs
Standard Trim Price Each
Stainless Steel Trim
Price Each1Z\x 014 2.8 $909.00 $1628.50
2 020 3.3 968.00 1628.502Z\x 024 6.4 1225.00 1664.50
3 030 6.8 1385.00 1725.004 040 12.1 1923.50 2376.505 050 26.1 2777.50 –6 060 32.5 3023.50 3653.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 700 are available with chainwheels. Contact Victaulic for details. ‡ 2” nut, in lieu of handwheel, available at no additional charge. Specifiy clearly on order (2 _ _ _ -DD) - see Valve Numbering System on next page.
V - 020 - 2 - 1OA A A
TypeNom.
In./mmSize
CodePressure
Rating Seat/Liner Disc & Trim Body Style OperatorV 014
020024030040050060
1½/402/502½/653/804/1005/1256/150
2 - 200 psi A - Grade “E” (EPDM) rubber-lined steelB - Grade “T” (Nitrile) rubber-lined steel
9 - Special*
A - Al-BronzeB - Stainless steelC - Chrome plated Al-Bronze
A - Standard 10 - Two Position Lever Handle
NOTE: * Details required
Series 7A2 Butterfly ValveSeries 7B2 Butterfly Valve
Butterfly Valve
SERIES 7B2Refer to publication 10.12
SERIES 7B2
Nominal Size With Gear Operator
Inches
Aprx. Wgt. Each Price EachLbs Without Tap With Tap
2Z\x 9.8 $2662.50 $2662.503 10.5 2731.00 2731.004 16.5 3084.50 3084.506 25.2 - 4474.508 59.0 4940.00 4940.00
10 96.0 7098.50 7098.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
4-7
Grooved IPS Pipe ValvesSEC
TION
4
GR
OO
VED IP
S PIP
E VA
LVES
VICTAULIC.COM PL2016-GENERAL-C
Series 726 Grooved End Ball Valve
Grooved End Ball Valve
SERIES 726Refer to publication 08.23
1Z\x – 3”
4 – 6”
SERIES 726 – PLATED STEEL OR STAINLESS STEEL TRIM
Nominal Size Inches
Aprx. Weight Each
Lbs
Valve Complete With Handle &
Tamper Resistant Lock/Seal Option
Valve * Complete With Gear Operator
WITH CARBON STEEL CHROME PLATED TRIM1000 psi 1166-15 1166-20
1Z\x 4.4 $668.50 +2 6.5 786.00 $7325.50
2Z\x 10.4 1973.50 +3 14.9 2841.00 4839.00
800 psi 8166-15 8166-204 41.5 $4084.50 $6082.006 78.5 15614.00 17741.00
WITH STAINLESS STEEL TRIM1000 psi 1126-15 1126-20
1Z\x 4.8 $982.00 +2 7.5 1141.00 +
2Z\x 11.6 2465.00 +3 17.2 3403.00 $5400.00
800 psi 8126-15 8126-204 45.0 $4913.50 $6912.506 82.0 16857.50 18987.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 726 valves are available with electric, pneumatic, and hydraulic actuators or chain wheels. Contact Victaulic for details.
+ Quoted on application. Contact Victaulic for pricing and availability.
Series 721 Grooved End Ball Valve
Grooved End Ball Valve
SERIES 721Refer to publication 08.14
SERIES 721 GROOVED END BALL VALVE
Nominal Size Inches
Aprx. Weight Each
Lbs
Valve Complete With 2-Position Handle
Price Each4 32.4 $5108.006 75.0 19529.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Act.In./mm
SizeCode
PressureRating Body Ball & Stem Seat Operator
B 040060
4/1006/150
8 - 800 psi/ 5515 kPa
1 - Iron 6 - Carbon steel, chrome plate
6 - Reinforced TFE 15 - 2 Position handleType
B - 040 - 8 6 6 6 - 15
VICTAULIC.COM PL2016-GENERAL-C4-8
Grooved IPS Pipe ValvesSE
CTI
ON
4
GR
OO
VED
IP
S P
IPE
VA
LVE
S
Series 727 Ball Valve
Ball Valve 1500 psi
SERIES 727Refer to publication 08.42
Bare Valve Groove x Groove
With Lever Handle
SERIES 727 – BARE VALVE WITH CARBON STEEL OR STAINLESS STEEL TRIM
Nominal SizeAprx. Wgt.
Each Price Each
Inches Lbs
Bare Valve with Carbon Steel
Trim
Bare Valve with Carbon Steel
Trim and Freeze Port Option
Bare Valve with Stainless Steel
Trim
Bare Valve with Stainless Steel Trim and Freeze
Port OptionGrooved x Grooved
2 7.2 $1929.00 $2064.50 $2025.00 $2167.502Z\x 11.2 5005.50 – 5256.50 –
3 16.8 3416.00 3656.00 3587.50 3838.504 36.3 5638.50 6033.50 6134.00 6335.506 86.5 14682.00 – 16885.00 –
Grooved x Threaded3 17.6 $3587.50 $3800.00 $3897.50 $4030.504 37.4 5920.50 6105.50 6325.00 6652.50
SERIES 727 – LEVER HANDLE WITH CARBON STEEL OR STAINLESS STEEL TRIM
Nominal SizeAprx. Wgt.
Each Price Each
Inches Lbs
Lever Handle with Carbon Steel Trim
Lever Handle with Carbon
Steel Trim and Freeze Port
Option
Lever Handle with Stainless
Steel Trim
Lever Handle with Stainless Steel Trim and
Freeze Port Option
Grooved x Grooved2 8.4 $1953.50 $2088.00 $2050.00 $2191.50
2Z\x 12.4 5030.50 – 5280.00 –3 18.0 3444.50 3683.50 3615.00 3866.504 37.5 5667.00 6061.50 5949.00 6362.506 87.7 14738.50 – 16940.00 –
Grooved x Threaded3 18.8 $3615.00 $3866.50 $3794.50 $4058.004 38.5 5949.00 6362.50 6245.00 6679.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
When ordered separately, handles and locking device kits are non-cancellable and non-returnable.
Series 722 Threaded Brass Ball Valve
Ball Valve
SERIES 722
(Threaded) 600 psi (WOG)Refer to publication 08.15
SERIES 722 – BALL VALVE
Nominal Size Inches
Aprx. Wgt. Each Lbs Price Each
Z\v 0.2 $59.00C\, 0.3 63.00Z\x 0.4 76.00C\v 0.7 105.501 1.0 155.50
1Z\v 1.5 250.501Z\x 2.1 322.00
2 2.4 409.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
UL Listed, FM Approved in Z\x” and larger sizes.
4-9
Grooved IPS Pipe ValvesSEC
TION
4
GR
OO
VED IP
S PIP
E VA
LVES
VICTAULIC.COM PL2016-GENERAL-C
Series 712 Swing Check Valve
Check Valve
SERIES 712Refer to publication 08.11
Series 712 Swing check valve is available with Grade “E”, “T” or “O” seat, bumper and bonnet closure gas-ket. Specify choice on order. Contact Victaulic for details.
Swinger check valves are supplied with bonnet cap drilled and tapped with Z\x” NPT pipe plug for chemi-cal injection or other auxillary connections.SERIES 712 – GRADE “E” OR “T” OR GRADE “O” WITH DUCTILE IRON BODY
Size Inches
Aprx. Wgt. Ea.
Lbs
Grade “E” or “T”
Price Each
Grade “O” Fluoroelastomer
Price Each2 11.6 $1126.50 $1942.50
2Z\x 18.0 1431.50 2446.503 22.5 1647.50 2602.504 38.0 2328.00 3798.50
Series 712 Swinger check valve is available with “E”, “T” or Grade “O” Fluoroelastomer set, bumper and bonnet closure gasket. Specify choice on order. Contact Victaulic for details.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
SERIES 712 DISC kIT
Size Disc kitInches Grade “E” or “T” Grade “O”
2 $489.00 $839.502Z\x 619.00 1055.50
3 712.50 1123.004 1006.00 1403.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 713 High Pressure Check Valve
High Pressure Check Valve
SERIES 713Refer to publication 08.54
SERIES 713 – GRADE “E” OR “T” WITH DUCTILE IRON BODY
Nominal Size Inches
Aprx. Weight Each
LbsGrade “E” or “T”
Price Each2 11.6 $1205.00
2Z\x 18.0 1380.003 22.5 1603.504 38.0 2278.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C4-10
Grooved IPS Pipe ValvesSE
CTI
ON
4
GR
OO
VED
IP
S P
IPE
VA
LVE
S
Series 377 Valve
Balancing Plug Valve
SERIES 377
(AWWA Dimensions) Use with Style 307 Transition coupling for IPS pipe.Refer to publication 08.12
SERIES 377 – BALANCING PLUG VALVE
Nominal SizeWith Lever Operator With Gear Operator
Inches
Aprx. Wgt. Each
Lbs Price EachGear Operator
Style
Aprx. Wgt. Each
Lbs Price Each3 47.0 $4990.50 MX 39.0 $7840.504 54.0 5171.50 MX 46.0 8198.006 89.0 6203.00 MZ 90.0 9219.00
8 (100 – 175 psi) – – MZ 140.0 14295.0010 – – MV 218.0 17283.0012 – – MA 308.0 25956.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 377 Plug Valve offers throttling function and does not include flow measurement. # AWWA sized grooved ends. For use in NPS systems, use Style 307 transition couplings.
Available standard with EPDM (Grade “E”) or Nitrile (Grade “T”). Specify choice on order. Coated plug, welded nickel seat and lever or gear operator complete with memory stop.
Series 716H/716 Vic-Check® Valve
Vic-Check Check Valve
SERIES 716H/716Refer to publication 08.08
Series 716H 2 – 3”
Series 716 4 – 12”
SERIES 716H/716 – VIC-CHECK CHECk VALVE
Nominal Size Inches
Size Code
Aprx. Weight Each
Lbs“E” or “T” Price Each
“O” Price Each
2 020 10.7 $1291.00 $1369.002Z\x 024 3.6 1294.50 +
3 030 4.5 1413.50 +4 040 16.0 1936.00 2263.005 050 20.0 2539.00 +6 060 28.0 2992.00 +8 080 40.0 4271.00 +
10 100 100.0 10275.50 +12 120 140.0 12177.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
For Series 716 sizes 4 –12” only – Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery. Valves come standard untapped – optional two Z\x” NPT drain holes. One hole on each side of seat also available as an option.
+ Quoted on application. Contact Victaulic for pricing and availability.
4-11
Grooved IPS Pipe ValvesSEC
TION
4
GR
OO
VED IP
S PIP
E VA
LVES
VICTAULIC.COM PL2016-GENERAL-C
Series W715 AGS Vic-Check Valve
Dual Disc Vic-Check Valve
AGS SERIES W715Refer to publication 20.08
AGS SERIES W715 – VIC-CHECK CHECk VALVE
Nominal Size Inches
Aprx. Weight Each
LbsGrade “E” Price Each
14 140.0 $9993.5016 160.0 13532.0018 180.0 15787.0020 200.0 21268.5024 240.0 31051.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 779 Venturi Check Valve
Venturi Check Valve
SERIES 779Refer to publication 08.10
SERIES 779 – VENTURI CHECk VALVE
Nominal Size Inches Size Code
Aprx. Weight Each
LbsValve * Complete
Price Each
Flow Measuring kit ONLY
Price Each4 040 16.0 $3007.00 $861.005 050 20.0 3888.50 861.006 060 28.0 4063.00 861.008 080 40.0 5342.00 861.00
10 100 100.0 11168.00 861.0012 120 140.0 13070.00 861.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Valve complete includes Venturi Check valve, drilled, tapped and plugged with Flow Measuring Kit enclosed (field assembly required). Flow Measuring Kit includes extension nipples, bronze access valves, quick disconnect for meter connection and flow chart tag to affix to the valve. NOTE: Valve comes with two Z\,” NPT drain holes and plug, one hole on each side of valve.
C - 040 - 1 4 1 0 - 02
TypeAct.
In./mmSize
CodeBody
Material Disc Seat Agency Accessories
C 024076030040050139060165080100120
2½/657
76.1 mm3/807
4/1005/125139.7 mm6/150165.1 mm8/20010/25012/300
1 - D.I.3 - Coated D.I.*
9 - Special*
1 - All-Bronze with EPDM¹2 - All-Bronze with Nitrile1
3 - All-Bronze with Viton1
4 - D.I. with EPDM Encapsulation3
5 - D.I. with Nitrile Encapsulation3
6 - D.I. with Fluoroelastomer Encapsulation3
9 - Special*
1 - Nickel **2 - PPS coated D.I.1
0 - None 00 - None02 - Flow Measuring Kit (Series 779)4,5
05 - ½" Taps with Plugs for Drains5,6
06 - 2" Drain Tap with ¼" Taps on Bottom of Valve25 - Flow Measuring Kit with Drains
NOTES:* Details must be provided with order1 - 2½"/65 mm, 76.1 mm and 3"/80 mm sizes only3 - Sizes 4 – 12"/100 – 300 mm only4 - This code is for Series 779 valves only (Example: C-060-1410-02)5 - Sizes 4 – 12"/100 – 300 mm only6 - Includes two ½" taps on bottom of valve – one each upstream and downstream of disc7 - Size Limitations: 76.1 mm and 3"/80 mm sizes are not available in Series 779 configurations** - 4"/100 mm and larger are always nickel
VICTAULIC.COM PL2016-GENERAL-C4-12
Grooved IPS Pipe ValvesSE
CTI
ON
4
GR
OO
VED
IP
S P
IPE
VA
LVE
S
Triple Service BFV/Check Valve Combination
Triple Service BFV/Check Valve Combination
WITHOUT VENTURI FLOW MEASUREMENT PORTS 300 PSI & 230°FRefer to publication 08.09 for Triple Service Assemblies.
†
TRIPLE SERVICE BFV/CHECk VALVES (WITHOUT VENTURI FLOW MEASUREMENT PORTS)
Pump Discharge
Line Nominal
Size Inches
Triple Service Combination Components
Valve/Coupling/Check
Aprx. Wgt. Each Lbs
Combination with Lever Handle & Memory Stop
Aprx. Wgt. Each Lbs
Combination with Gear Valve Operator &
Memory StopWithout Venturi Flow Measurement Ports
2Z\x
Vic-300 MasterSeal™ Std Trm 7.5 7.5 S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt
2.6 2.6
S/716 Vic-Check Valve Ptd “E” Disc 3.6 3.6Total BFV/Check Combination 13.7 $2782.00 13.7 $4065.50
3
Vic-300 MasterSeal™ Std Trm 8.5 8.5 S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt
3.0 3.0
S/716 Vic-Check Valve Ptd “E” Disc 4.5 4.5Total BFV/Check Combination 16.0 $2969.00 16.0 $4261.50
4
Vic-300 MasterSeal™ Std Trm 11.8 11.8 S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt
5.3 5.3
S/716 Vic-Check Valve Ptd “E” Disc 16.0 16.0Total BFV/Check Combination 33.1 $4068.50 33.1 $5162.00
5
Vic-300 MasterSeal™ Std Trm 20.0 20.8 S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt
6.7 6.7
S/716 Vic-Check Valve Ptd “E” Disc 20.0 20.0Total BFV/Check Combination 46.7 $5578.00 47.5 $7107.50
6
Vic-300 MasterSeal™ Std Trm 23.2 24.0 S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt
8.3 8.3
S/716 Vic-Check Valve Ptd “E” Disc 28.0 28.0Total BFV/Check Combination 59.5 $6292.00 60.3 $7710.00
8
Vic-300 MasterSeal™ Std Trm 37.5 38.3 S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt
15.1 15.1
S/716 Vic-Check Valve Ptd “E” Disc 40.0 40.0Total BFV/Check Combination 92.6 $8470.50 93.4 $9567.50
10
Vic-300 MasterSeal™ Std Trm 84.0 81.5 S/07 Zero-Flex Rigid Cplg Ptd w/”E” Gskt
23.5 23.5
S/716 Vic-Check Valve Ptd “E” Disc 100.0 100.0Total BFV/Check Combination 207.5 $18321.00 205.0 $18321.00
12
Vic-300 MasterSeal™ Std Trm 100.0 97.5 S/07 Zero-Flex Rigid Cplg Ptd w/”E” Gskt
28.2 28.2
S/716 Vic-Check Valve Ptd “E” Disc 140.0 140.0Total BFV/Check Combination 268.2 $21371.00 265.7 $22121.00
† Victaulic Series 377 Plug and Series 716 Check Valve Triple Service Combinations are available as well as the Butterfly & Check Valve Combination shown above.
4-13
Grooved IPS Pipe ValvesSEC
TION
4
GR
OO
VED IP
S PIP
E VA
LVES
VICTAULIC.COM PL2016-GENERAL-C
AGS Triple Service BFV/Check Valve Combination
AGS Triple Service BFV/Check Valve Combination
WITHOUT VENTURI FLOW MEASUREMENT PORTS 300 PSI & 230°FRefer to publication 20.18 for Triple Service Assemblies.
AGS TRIPLE SERVICE BFV/CHECk VALVES (WITHOUT VENTURI FLOW MEASUREMENT PORTS)
Pump Discharge
Line Nominal
Size (Inches)
Triple Service Combination Components
Valve/Coupling/Check
Aprx. Wgt. Each Lbs
Combination with Gear Valve
Operator & Memory Stop
Without Venturi Flow Measurement Ports14 Vic-300 MasterSeal™ AGS Std Trm 143.7
S/W07 AGS Rigid Cplg Ptd w “E” Gskt 48.9S/W715 AGS Vic-Check Valve Ptd “E” Disc
140.0
Total BFV/Check Combination 332.6 $21249.0016 Vic-300 MasterSeal™ AGS Std Trm 171.7
S/W07 AGS Rigid Cplg Ptd w “E” Gskt 60.8S/W715 AGS Vic-Check Valve Ptd “E” Disc
160.0
Total BFV/Check Combination 392.5 $26797.0018 Vic-300 MasterSeal™ AGS Std Trm 217.7
S/W07 AGS Rigid Cplg Ptd w “E” Gskt 71.2S/W71 AGS Vic-Check Valve Ptd “E” Disc
180.0
Total BFV/Check Combination 468.9 $32367.0020 Vic-300 MasterSeal™ AGS Std Trm 333.0
S/W07 AGS Rigid Cplg Ptd w “E” Gskt 81.7S/W715 AGS Vic-Check Valve Ptd “E” Disc
200.0
Total BFV/Check Combination 614.7 $44097.00 24 Vic-300 MasterSeal™ AGS Std Trm 521.5
S/W07 AGS Rigid Cplg Ptd w “E” Gskt 116.2S/W715 Vic-Check Valve Ptd “E” Disc 240.0Total BFV/Check Combination 877.7 $57415.50
VICTAULIC.COM PL2016-GENERAL-C4-14
Grooved IPS Pipe ValvesSE
CTI
ON
4
GR
OO
VED
IP
S P
IPE
VA
LVE
S
Triple Service BFV/Check Valve Combination with Venturi Flow Measurement Ports
Triple Service BFV/Check Valve Combination
WITH VENTURI FLOW MEASUREMENT PORTS 300 PSI & 230°FRefer to publication 08.09 for Triple Service Assemblies.
†
TRIPLE SERVICE BFV/CHECk VALVES WITH VENTURI FLOW MEASUREMENT PORTS AND kIT
Pump Discharge
Line Nominal
Size Inches
Triple Service Combination Components
Valve/Coupling/Check
Aprx. Wgt. Each Lbs
Combination with Lever Handle & Memory Stop
Aprx. Wgt. Each Lbs
Combination with Gear Valve Operator &
Memory StopWith Venturi Flow Measurement Ports
4
Vic-300 MasterSeal™ Std Trm 11.8 11.8 S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt
5.3 5.3
S/779 Venturi Check Valve Ptd “E” Disc 16.0 16.0Total BFV/Venturi/Check Combination
33.1 $5114.00 33.1 $6207.50
5
Vic-300 MasterSeal™ Std Trm 20.0 20.8 S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt
6.7 6.7
S/779 Venturi Check Valve Ptd “E” Disc 20.0 20.0Total BFV/Venturi/Check Combination
46.7 $6896.50 47.5 $7985.50
6
Vic-300 MasterSeal™ Std Trm 23.2 24.0 S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt
8.3 8.3
S/779 Venturi Check Valve Ptd “E” Disc 28.0 28.0Total BFV/Venturi/Check Combination
59.5 $7338.00 60.3 $8755.50
8
Vic-300 MasterSeal™ Std Trm 37.5 38.3 S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt
15.1 15.1
S/779 Venturi Check Valve Ptd “E” Disc 40.0 40.0Total BFV/Venturi/Check Combination
92.6 $8798.50 93.4 $10614.00
10
Vic-300 MasterSeal™ Std Trm 84.0 81.5 S/07 Zero-Flex Rigid Cplg Ptd w/”E” Gskt
23.5 23.5
S/779 Venturi Check Valve Ptd “E” Disc 100.0 100.0Total BFV/Venturi/Check Combination
207.5 $19290.50 205.0 $19290.50
12
Vic-300 MasterSeal™ Std Trm 100.0 97.5 S/07 Zero-Flex Rigid Cplg Ptd w/”E” Gskt
28.2 28.2
S/779 Venturi Check Valve Ptd “E” Disc 140.0 140.0Total BFV/Venturi/Check Combination
268.2 $22341.50 265.7 $23091.00
‡ Flow Measuring Kit includes extension nipples, bronze access valves, quick disconnects for meter connection (ISO 7241-1 Series B), flow chart tag to affix to the valve and instructions. † Victaulic Series 377 Plug & Series 779 Venturi Check Valve Triple Service Combination also available as well as the Butterfly & Check Valve Combination shown above.
4-15
Grooved IPS Pipe ValvesSEC
TION
4
GR
OO
VED IP
S PIP
E VA
LVES
VICTAULIC.COM PL2016-GENERAL-C
Series 725 Diverter Valve
Diverter Valve
SERIES 725Refer to publication 08.40
with Electric Actuator
with Gear Operator
SERIES 725 – DIVERTER VALVE
Nominal SizeSeries 725
with Electric ActuatorSeries 725
with Gear Operator
InchesAprx. Weight Each
Lbs Price EachAprx. Weight Each
Lbs Price Each6 1250.0 $93250.50 980.0 $64311.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Class Size End Prep
V 060 725 M – Manual ActuatorE – Electric ActuatorP – PneumaticO – Other
V 1 1060 M725
Style Operator Operator Options
O – NoneManual OperatorsM – Hand WheelN – Chain WheelElectrical Voltage1 – 480V, 60Hz, 3 phase2 – 575V, 60 Hz, 3 phase3 – 380V, 50 Hz, 3 phase4 – 380V, 60 Hz, 3 phase5 – 220V, 60 Hz, 3 phase6 – 400V, 50 Hz, 3 phase7 – 415V, 50 Hz, 3 phase
1 – OGS Grooved3 – Other Specify
Series 731-D Suction Diffuser
VICTAULIC.COM PL2016-GENERAL-C4-16
Grooved IPS Pipe ValvesSE
CTI
ON
4
GR
OO
VED
IP
S P
IPE
VA
LVE
S
Suction Diffusers
SERIES 731-DRefer to publication 09.20
SERIES 731-D – SUCTION DIFFUSERS
Grvd. End Inlet x Vic-Flange Adapter
Outlet Nominal Size
Inches
Aprx. Wgt Each
Lbs
Centerline of Inlet Pipe to Flange Face
Inches Price Each3 x 2 20.1 6.30 $2990.50
2Z\x 26.0 6.30 3002.503 27.7 6.30 3238.50
4 x 2Z\x 29.7 7.40 3609.003 31.6 7.40 3568.004 34.6 7.40 3790.50
5 x 2Z\x 46.2 8.40 3211.003 46.2 8.40 5001.504 49.4 8.40 4942.505 52.3 8.40 4994.00
6 x 4 64.0 9.00 4697.505 67.3 9.00 4825.506 70.3 9.00 5817.50
8 x 5 98.5 10.20 7212.006 102.1 10.20 8050.508 110.7 10.20 9929.00
10 x 6 150.6 12.40 14458.508 159.9 12.40 14515.50
10 172,0 12.40 14967.0012 x 8 245.4 15.43 18673.00
10 260.3 15.43 19029.5012 273.2 15.43 20815.50
Start up baskets are available – for pricing contact Victaulic.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series W731-D AGS Suction Diffuser
Suction Diffuser
AGS SERIES W731-DRefer to publication 20.20
AGS SERIES W731-D – SUCTION DIFFUSER
Grvd. End Inlet x Vic-Flange Adapter
Outlet Nominal Size
Inches
Aprx. Wgt Each
Lbs
Centerline of Inlet Pipe to Flange Face
Inches ANSI Class 15014 x 10 328.9 16.1 $19252.00
12 345.8 16.1 20980.5014 367.6 16.1 21766.00
16 x 12 464.5 19.6 27488.0014 489.9 19.6 28561.0016 514.2 19.6 29627.50
18 x 14 788.6 21.7 38255.0016 812.9 21.7 39333.0018 828.3 21.7 40806.50
20 x 16 955.0 24.4 50438.0018 970.5 24.4 50907.5020 1019.0 24.4 52898.50
24 x 18 1255.8 26.4 70965.0020 1337.4 26.4 72835.0024 1401.3 26.4 75409.00
Start up baskets are available – for pricing contact Victaulic.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
4-17
Grooved IPS Pipe ValvesSEC
TION
4
GR
OO
VED IP
S PIP
E VA
LVES
VICTAULIC.COM PL2016-GENERAL-C
Series 730 Vic-Strainer Tee-Type Strainer
Tee-Type Strainer
SERIES 730Refer to publication 09.02
SERIES 730 – TEE-TYPE STRAINER
Nominal SizeAprx.
Weight Each Price EachStandard
Basket OnlyFine Mesh
Basket Only † Inches Lbs Standard * Galvanized Price Each Price Each
1Z\x 7.0 $1976.00 $2548.50 + +2 8.0 2457.50 2819.50 $1046.00 +
2Z\x 9.0 2917.50 3349.00 1167.50 +3 21.0 3159.50 3723.50 1167.50 +4 20.5 3773.00 4406.50 1517.50 +5 31.0 4117.00 4886.00 + +6 44.0 4994.50 5985.50 2190.00 +8 90.6 8039.50 11451.50 2764.00 +
10 136.0 10908.00 + 4049.50 +12 197.0 12314.50 + 3221.50 +
14 ‡ 300.0 65105.00 + + +16 ‡ 350.0 82827.00 + + +18 ‡ 400.0 86554.00 + + +20 ‡ 565.0 + + + +24 ‡ 830.0 + + + +30 ‡ 1273.0 + + + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
* Vic-Strainer Series 730 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series 730 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.
NOTE: Series 730 Vic-Strainers in sizes 14 – 24” have a standard groove for retrofit only and must not be used with Advanced Groove System (AGS) products. Contact Victaulic for pricing and availability.
Series W730 AGS Vic-Strainer Tee Type Strainer
Tee-Type Strainer
AGS SERIES W730Refer to publication 20.11
AGS SERIES W730 – TEE-TYPE STRAINER
Nominal Size Inches
Aprx. Weight Each
LbsPrice Each Standard *
Standard Basket Only Price Each
Fine Mesh † Basket Only Price Each
14 300.0 $47254.00 + +16 350.0 58142.50 + +18 400.0 60759.00 + +20 565.0 78298.50 + +24 830.0 96060.50 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
* Vic-Strainer Series W730 AGS standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series W730 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.
† Contact Victaulic for application and pricing information. 6 mesh screens standard for 14 – 16”, and 4 mesh for 18 – 24”.
VICTAULIC.COM PL2016-GENERAL-C4-18
Grooved IPS Pipe ValvesSE
CTI
ON
4
GR
OO
VED
IP
S P
IPE
VA
LVE
S
Series 732 Vic-Strainer Wye Type Strainer
Grooved End Vic-Strainer
SERIES 732Refer to publication 09.03
SERIES 732 – GROOVED END VIC-STRAINER
Nominal SizeAprx.
Weight Each Price EachStandard
Basket OnlyFine Perforated
Basket OnlyInches Lbs Standard * Galvanized Price Each
2 10.0 $1323.50 $1567.50 $283.50 +2Z\x 14.0 1398.00 1682.50 301.00 +
3 20.0 1688.50 2110.50 360.50 +4 32.0 2167.00 2776.50 461.00 +5 50.0 4113.50 5022.00 873.50 +6 72.0 5510.50 6957.00 1167.50 +8 125.0 9169.00 11636.00 1936.00 +
10 205.0 23093.50 27563.00 2437.50 +12 280.0 26912.50 32461.00 2840.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
* Vic-Strainer Series 732 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM or Nitrile Grade “T” gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series 732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.
Series W732 Vic-Strainer Wye Type Strainer
Wye Type Vic-Strainer
SERIES W732Refer to publication 20.19
SERIES W732 – WYE TYPE VIC-STRAINER
Nominal Size Aprx. Weight Each Price Each
Inches Lbs Standard *Standard
Basket OnlyFine Perforated Basket Only †
14 425.0 $46309.00 $18258.50 +16 600.0 56979.50 22467.00 +18 800.0 59544.00 23263.50 +
* Vic-Strainer Series W732 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM gas-ket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series W732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve. † Contact Victaulic for application and pricing information. Standard stainless steel baskets are offered for the following sizes: 0.156”/4 mm diameter for holes 14 – 18”/350 – 450 mm sizes.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Style 150 Mover Expansion Joint
Mover Expansion Joint
STYLE 150Refer to publication 09.04
STYLE 150 – MOVER EXPANSION JOINT
SizeAprx.
Weight Each
Maximum Available Expansion
Grooved and Plain End “E” or “T” Price Each
Inches Lbs Inches Painted Galv.2 15.9 3 $3184.50 +3 25.6 3 3765.50 +4 39.6 3 4712.50 +5 55.0 3 8567.00 +6 75.0 3 9863.50 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Victaulic Style 150 Expansion Joints are supplied fully assembled, with a Grade “E” gasket for water services up to +230°F. For other gaskets and services consult Victaulic. Style 150 Expansion Joints are supplied with plain ends for installation using two Roust-A-Bout Style 99 couplings, or with grooved ends for installation using Victaulic Coupling Style 77, 75, HP-70 or 07 Zero-Flex™ couplings. NOTE: Style 155 Expansion Joints in sizes C\v – 24” are available. Style 155 Expansion Joints are non-cancellable and non-return-able. Contact Victaulic for details.
+ Quoted on application. Contact Victaulic for pricing and availability.
4-19
Grooved IPS Pipe ValvesSEC
TION
4
GR
OO
VED IP
S PIP
E VA
LVES
VICTAULIC.COM PL2016-GENERAL-C
Style 156 Assembly Header
Assembly Header
STYLE 1562 x 1"
Vic-Header - Style 156
2"
Style 730R
R
R
RR
Vic-Header - Style 156
2 x 1"2"
Style 730
R
R
R R R
2 x 1"
Vic-Header - Style 156
RRR
R
Nominal Size Main x Outlet
Ball Valves & Outlets
Complete Vic-Header with Strainer and
Isolation Valve Grade “E” or “T”
Gasket
Vic-Header with Isolation BF
Valve Grade “E” or “T”
Gasket
Vic-Header with Strainer
Grade “E” or “T” Gasket
Vic-Header Only Grade “E” or “T”
Gakset
Inches Quantity
Aprx. Wgt. Ea. Lbs
Price Each
Aprx. Wgt. Ea. Lbs
Price Each
Aprx. Wgt. Ea. Lbs
Price Each
Aprx. Wgt. Ea. Lbs
Price Each
2 x 1 3 32 $5317.50 32 + 26 $4867.50 16 $1843.502 x 1 x 1Z\x 3 32 + 32 + 26 + 16 2271.003 x 1 x 1Z\x 3 32 + 32 + 26 + 16 2355.503 x 1 x 2 3 32 + 32 $2685.00 26 + 16 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Victaulic Style 150 Expansion Joints are supplied fully assembled, with a Grade “E” gasket for water services up to +230°F. For other gaskets and services consult Victaulic. Style 150 Expansion Joints are supplied with plain ends for installation using two Roust-A-Bout Style 99 couplings, or with grooved ends for installation using Victaulic Coupling Style 77, 75, HP-70 or 07 Zero-Flex™ couplings. NOTE: Style 155 Expansion Joints in sizes C\v – 24” are available. Style 155 Expansion Joints are non-cancellable and non-return-able. Contact Victaulic for details.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C4-20
Grooved IPS Pipe ValvesSE
CTI
ON
4
GR
OO
VED
IP
S P
IPE
VA
LVE
S
4-21
Grooved IPS Pipe ValvesSEC
TION
4
GR
OO
VED IP
S PIP
E VA
LVES
VICTAULIC.COM PL2016-GENERAL-C
SECTION 5 – Hydronic Balancing Products
Hydronic Balancing Products
5-1VICTAULIC.COM PL2016-GENERAL-C
Manual Balancing ValvesTA Series 786 STAS – Solder End
Manual Balancing Valves
TA Series 786
STAS
Solder End (300 psi)Refer to publication 08.16
TA SERIES 786 – STAS
Nominal Size Inches
Approx. Wgt. Ea.
LbsVictaulic Part Code
IMI TA Code List Price
Z\x 1.4 V-004-786-CBV 52-167-914 $209.00C\v 1.4 V-006-786-CBV 52-167-920 226.001 1.9 V-010-786-CBV 52-167-925 270.50
1Z\v 2.4 V-012-786-CBV 52-167-932 340.001Z\x 3.1 V-014-786-CBV 52-167-940 419.50
2 4.5 V-020-786-CBV 52-167-950 558.50
TA Series 787 STAD – NPT (Fem.) End – (300 psi)
TA Series 787
STAD
NPT (Fem.) End (300 psi)Refer to publication 08.16
TA SERIES 787 – STAD
Nominal Size Inches
Approx. Wgt. Ea.
LbsVictaulic Part Code
IMI TA Code List Price
Z\x 1.5 V-004-787-CBV 52-167-514 $209.00C\v 1.6 V-006-787-CBV 52-167-520 226.001 2.0 V-010-787-CBV 52-167-525 270.50
1Z\v 2.6 V-012-787-CBV 52-167-532 340.001Z\x 3.3 V-014-787-CBV 52-167-540 419.50
2 5.0 V-020-787-CBV 52-167-550 558.50
Series 78K STADK
Series 78K
FPT End x MPT Union (400 psi)Refer to publication 08.16
SERIES 78k – STADk WITH UNION CONNECTION
Nominal Size Inches
MPT Union x FPT Valve Victaulic Part Code Price Each
Z\x x Z\x V-004-78K-CBV $250.00C\v V-X87-78K-CBV 271.50
C\v x C\v V-006-78K-CBV 271.501 V-A61-78K-CBV 311.50
1 x 1 V-010-78K-CBV 311.501Z\v V-Z90-78K-CBV 391.00
1Z\v x 1Z\v V-012-78K-CBV 391.001Z\x V-Z91-78K-CBV 483.00
1Z\x x 1Z\x V-014-78K-CBV 483.002 V-J86-78K-CBV 794.00
2 x 2 V-020-78K-CBV 787.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Optional tailpieces must be ordered for double or triple reductions. If needed, specify tailpiece option when ordering.
VICTAULIC.COM PL2016-GENERAL-C5-2
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
TA Series 788 STAF – Flanged End
TA Series 788
STAF
Flanged End (250 psi)Refer to publication 08.16
TA SERIES 788 – STAF
Nominal Size Inches
Approx. Wgt. Ea.
LbsVictaulic Part Code
IMI TA Code List Price
2Z\x 24.0 V-024-788-CBV 52-167-965 $1640.503 31.0 V-030-788-CBV 52-167-980 2680.504 43.0 V-040-788-CBV 52-167-990 4621.505 62.0 V-050-788-CBV 52-167-991 6892.506 82.0 V-060-788-CBV 52-167-992 9110.508 168.0 V-080-788-CBV 52-167-993 15137.50
10 270.0 V-100-788-CBV 52-167-994 22736.5012 360.0 V-120-788-CBV 52-167-995 47524.0014 655.0 V-140-788-CBV 52-182-996 63617.0016 895.0 V-160-788-CBV 52-182-997 69620.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
TA Series 789 STAG – Grooved End
TA Series 789
STAG
Grooved End (350 psi)Refer to publication 08.16
TA SERIES 789 – STAG
Nominal Size Inches
Approx. Wgt. Ea.
LbsVictaulic Part Code
IMI TA Code List Price
2Z\x 14.0 V-024-789-CBV 52-167-073 $1388.003 20.0 V-030-789-CBV 52-167-089 2286.004 31.0 V-040-789-CBV 52-167-114 3919.505 50.0 V-050-789-CBV 52-167-141 5899.006 69.0 V-060-789-CBV 52-167-168 7819.508 140.0 V-080-789-CBV 52-167-219 15137.50
10 202.0 V-100-789-CBV 52-167-273 22736.5012 280.0 V-120-789-CBV 52-167-324 47524.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
TA Series 786 and 787 Insulation Kits
TA Series 786 and 787
INSULATION kITS
TA SERIES 786 AND 787 – INSULATION kITS
Nominal Size Inches
Approx. Wgt. Ea.
LbsVictaulic Part Code List Price
Z\x, C\v 0.5 K-004-784-INS $75.501 0.5 K-010-784-INS 80.50
1Z\v 0.5 K-012-784-INS 91.001Z\x 0.5 K-014-784-INS 97.50
2 0.5 K-020-784-INS 108.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
5-3
Hydronic Balancing ProductsSEC
TION
5
HYD
RO
NIC
BA
LAN
CING
PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
TA Series 788 and 789 Insulation Kits
TA Series 788 and 789
INSULATION kITS
TA SERIES 788 AND 789 – INSULATION kITS
Nominal Size Inches
Approx. Wgt. Ea.
LbsVictaulic Part Code
IMI TA Code List Price
2Z\x 0.8 K-024-784-INS 52-189-865 $1041.503 2.0 K-030-784-INS 52-189-880 1147.004 2.0 K-040-784-INS 52-189-890 1250.505 2.0 K-050-784-INS 52-189-891 1516.006 2.0 K-060-784-INS 52-189-892 1458.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
TA Series 786 Drain Kit
Kit 786-DK
DRAIN kIT FOR USE WITH TA SERIES 786 AND 787
TA SERIES 786 DRAIN kIT
Approx. Wgt. Ea.
LbsVictaulic Part Code
IMI TA Code List Price
2.0 K-000-786-CBV 52-167-997 $59.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Spare Parts
Spare Parts
Probe Port Extended Probe Port
0
0
STAD 2 ½
DigitalRead out
Valve Typeand Size
Lock Feature/Memory Stop
Plastic Handwheel
Aluminum Handwheel
Nominal Size Inches
Victaulic Part Code
IMI TA Code List Price
Replacement Probe Port SetZ\x – C\v * K-000-785-012 52-167-813 $92.50Z\x – 2 K-000-740-003 52-179-810 74.50
2Z\x – 12 K-000-740-002 52-179-811 74.50Extended (2C\,”) Port Set
2Z\x – 12 K-000-740-001 52-179-812 $128.50Handwheel - Plastic
Z\x – 2 P-004-784-001 52-186-009 $100.502Z\x – 6 P-024-784-001 52-186-098 303.50
Handwheel - Aluminum8 – 12 P-080-784-001 52-186-098 $2604.00
Measuring ProbesZ\x – 12 P-000-738-100 307-635-62 $394.00
Probes for Series 738 Differential Gauge MeterWithout Valve K-000-740-005 52-179-006 $202.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Automatic Balancing ValvesSeries 76T – Female x Female Threaded
VICTAULIC.COM PL2016-GENERAL-C5-4
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
Automatic Balancing ValvesVictaulic automatic balancing valves are available as an alternative to manual balancing valves when ordering a Victaulic Koil-Kit™ Coil Pack. Contact Victaulic for details.
Series 76T
FEMALE X FEMALE THREADEDRefer to publication 08.34
SERIES 76T
Nominal Size Inches
Aprox. Wgt. Ea.
LbsVictaulic Part Code List Price
Z\x 1.3 V-004-76T-0_ _ $344.00C\v 1.3 V-006-76T-0_ _ 349.001 1.5 V-010-76T-0_ _ 385.50
1 * 3.4 V-010-76T-H_ _ 741.001Z\v 3.4 V-012-76T-0_ _ 741.001Z\x 3.4 V-014-76T-0_ _ 741.00
2 3.7 V-020-76T-0_ _ 805.50
* Prices shown reflect an automatic balancing valve body with either high or low flow cartridge.
Series 76B – Female x Female Threaded with a Ball Valve Kit
Series 76B
FEMALE X FEMALE THREADED WITH A BALL VALVE kITRefer to publication 08.34
SERIES 76B
Nominal Size Inches
Aprox. Wgt. Ea.
LbsVictaulic Part Code List Price
Z\x 1.7 V-004-76B-0_ _ $559.50C\v 2.1 V-006-76B-0_ _ 568.501 2.6 V-010-76B-0_ _ 661.00
1 * 4.6 V-010-76B-H_ _ 1016.501Z\v 5.1 V-012-76B-0_ _ 1147.001Z\x 2.8 V-014-76B-0_ _ 1230.50
2 6.6 V-020-76B-0_ _ 1441.00
* Prices shown reflect an automatic balancing valve body with either high or low flow cartridge.
Series 76K – Male x Female Threaded
Series 76K
MALE X FEMALE THREADEDRefer to publication 08.34
SERIES 76k
Nominal Size Inches
Aprox. Wgt. Ea.
LbsVictaulic Part Code List Price
Z\x 1.5 V-004-76K-0_ _ $473.00C\v 2.0 V-006-76K-0_ _ 537.001 3.5 V-010-76K-0_ _ 537.00
1 * 5.4 V-010-76K-H_ _ 889.501Z\v 5.4 V-012-76K-0_ _ 870.001Z\x 5.5 V-014-76K-0_ _ 1016.50
2 5.9 V-020-76K-0_ _ 1024.00
* Prices shown reflect an automatic balancing valve body with either high or low flow cartridge.
5-5
SECTIO
N 5
H
YDR
ON
IC B
ALA
NCIN
G P
RO
DU
CTS
VICTAULIC.COM PL2016-GENERAL-C
Hydronic Balancing Products
Series 76V – Male x Female Threaded with a Ball Valve Kit
Series 76V
MALE X FEMALE THREADED WITH A BALL VALVE kITRefer to publication 08.34
SERIES 76V
Nominal Size Inches
Aprox. Wgt. Ea.
LbsVictaulic Part Code List Price
Z\x 1.9 V-004-76V-0_ _ $689.00C\v 2.8 V-006-76V-0_ _ 701.501 4.7 V-010-76V-0_ _ 812.50
1 * 6.6 V-010-76V-H_ _ 1140.001Z\v 7.2 V-012-76V-0_ _ 1276.001Z\x 7.9 V-014-76V-0_ _ 1505.50
2 8.8 V-020-76V-0_ _ 1660.00
* Prices shown reflect an automatic balancing valve body with either high or low flow cartridge.
Series 76G – Grooved
Series 76G
GROOVEDRefer to publication 08.34
SERIES 76G
Nominal Size Inches
Aprox. Wgt. Ea.
LbsVictaulic Part Code List Price
2Z\x 17.0 V-024-76G-_ _ _ * $3702.503 18.0 V-030-76G-_ _ _ * 3826.504 33.0 V-040-76G-H _ _ * 5923.506 52.0 V-060-76G-H _ _ * 11598.50
* Last two part code numbers are based on cartridge codes found in publication 08.34. Prices shown reflect an automatic balancing valve body with either high or low flow cartridge(s).
Series 76 with Sweat AdapterRefer to publication 08.34
SERIES 76 WITH SWEAT ADAPTER
Nominal Size Inches Valve List Price
Z\x $402.00C\v 406.001 443.00
1 * 800.501Z\v 800.501Z\x 800.50
2 865.00
* Prices shown reflect an automatic balancing valve body with either high or low flow cartridge.
AccessoriesRefer to publication 08.34
2” PT Port
SERIES 76 ACCESSORIES – PT PORTS
Length Victaulic PriceInches Part Code Each4 – Red P-000-76T-4XR $101.004 – Blue P-000-76T-4XB 114.00
VICTAULIC.COM PL2016-GENERAL-C5-6
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
Automatic Balancing Valve Cartridges
Automatic Balancing Valve CartridgesRefer to publication 08.34 Flow
min ∆P
Low Pressure No. Max ∆P 43.5 psi
Figure String Position 23 & 34
High Pressure No. Max ∆P 87 psi
Position 23 & 34
gpm psiVictaulic
CodePrice Each
Victaulic Code
Price Each
Cartridge Type 100.11 1.02 1A $130.50 – $187.000.15 1.02 1B 130.50 – 187.000.20 1.02 1C 130.50 – 187.000.24 1.02 1D 130.50 AD 187.000.33 1.16 1E 130.50 AE 187.000.39 1.31 1F 130.50 AF 187.000.46 1.45 1G 130.50 AG 187.000.50 1.45 1H 130.50 AH 187.000.57 1.60 1I 130.50 AI 187.000.68 1.60 1J 130.50 AJ 187.000.77 1.74 1K 130.50 AK 187.000.90 1.74 1L 130.50 AL 187.00 1.06 1.74 1M 130.50 AM 187.00 1.23 1.74 1N 130.50 AN 187.00 1.41 1.89 1O 130.50 AO 187.00 1.54 1.89 1P 130.50 AP 187.00 1.76 1.89 1Q 130.50 AQ 187.002.10 2.03 1R 130.50 AR 187.00 2.40 2.03 1S 130.50 AS 187.00
Cartridge Type 112.71 2.03 1T $130.50 AT $187.002.95 2.03 1U 130.50 AU 187.003.24 2.03 1V 130.50 AV 187.003.52 2.32 1W 130.50 AW 187.003.83 2.76 1X 130.50 AX 187.00 4.12 3.05 1Y 130.50 AY 187.00
Cartridge Type 204.49 3.19 2A $130.50 BA $187.004.76 3.19 2B 130.50 BB 187.005.26 3.19 2C 130.50 BC 187.005.88 3.34 2D 130.50 BD 187.006.53 3.34 2E 130.50 BE 187.006.96 3.34 2F 130.50 BF 187.007.81 3.48 2G 130.50 BG 187.00 8.07 3.48 2H 130.50 BH 187.009.16 3.63 2I 130.50 BI 187.009.91 3.77 2J 130.50 BJ 187.00
10.21 3.92 2K 130.50 BK 187.0010.78 4.06 2L 130.50 BL 187.00
Flowmin ∆P
Low Pressure No. Max ∆P 43.5 psi
Figure String Position 23 & 34
High Pressure No.
Max ∆P 87 psi Position 23 & 34
gpm psiVictaulic
CodePrice Each
Victaulic Code
Price Each
Cartridge Type 302.97 1.74 3A $289.50 CA $401.503.79 1.74 3B 289.50 CB 401.504.49 1.74 3C 289.50 CC 401.505.00 1.74 3D 289.50 CD 401.505.24 1.74 3E 289.50 CE 401.505.60 1.89 3F 289.50 CF 401.505.94 1.89 3G 289.50 CG 401.506.54 1.89 3H 289.50 CH 401.50 6.90 2.03 3I 289.50 CI 401.507.18 2.03 3J 289.50 CJ 401.507.99 2.03 3K 289.50 CK 401.508.81 2.18 3L 289.50 CL 401.509.00 2.32 3M 289.50 CM 401.509.56 2.32 3N 289.50 CN 401.50
10.00 2.47 3O 289.50 CO 401.5010.48 2.47 3P 289.50 CP 401.5011.00 2.61 3Q 289.50 CQ 401.5011.62 2.61 3R 289.50 CR 401.5012.64 2.76 3S 289.50 CS 401.5014.05 3.05 3T 289.50 CT 401.50 15.00 3.19 3U 289.50 CU 401.5015.35 3.19 3V 289.50 CV 401.50
Cartridge Type 4016.00 2.90 4A $289.50 DA $401.5016.20 3.05 4B 289.50 DB 401.50 18.00 3.05 4C 289.50 DC 401.5019.00 3.05 4D 289.50 DD 401.50 20.00 3.19 4E 289.50 DE 401.5021.00 3.19 4F 289.50 DF 401.50 22.00 3.34 4G 289.50 DG 401.50 24.00 3.48 4H 289.50 DH 401.50 26.00 3.63 4I 289.50 DI 401.50 28.00 3.77 4J 289.50 DJ 401.50 30.00 3.92 4K 289.50 DK 401.50 32.00 4.06 4L 289.50 DL 401.50 34.00 4.35 4M 289.50 DM 401.50 36.00 4.50 4N 289.50 DN 401.50 38.00 4.79 4O 289.50 DO 401.50 40.00 4.93 4P 289.50 DP 401.50 42.00 5.11 4Q 289.50 DQ 401.50 44.00 5.51 4R 289.50 DR 401.50 46.00 5.80 4S 289.50 DS 401.50 48.00 6.09 4T 289.50 DT 401.5050.00 6.38 4U 289.50 DU 401.50
TA Series TC – On/Off Control
5-7
Hydronic Balancing ProductsSEC
TION
5
HYD
RO
NIC
BA
LAN
CING
PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
Balancing Control Valves
Series TC – On/Off Control
TBV TERMINAL BALANCING AND CONTROL VALVERefer to publication 08.38
SERIES TC – ON/OFF CONTROL
Nominal Size Inches
Aprox. Wgt. Ea.
LbsVictaulic Part Code
kOIL-kIT™ Coil Pack Figure String Positions 18 – 23 List Price
Z\x – Low Flow – NP 0.7 V-004-0TC-LNP FAFAF-L $691.50Z\x – Nominal Flow – NP 0.7 V-004-0TC-NNP FAFAF-0 691.50
Z\x – Low Flow – NO 0.7 V-004-0TC-L00 EAFAF-L 389.50Z\x – Low Flow – NC 0.7 V-004-0TC-LNC GAFAF-L 691.50
Z\x – Nominal Flow – NC 0.7 V-004-0TC-NNC GAFAF-0 691.50Z\x – Nominal Flow – NO 0.7 V-004-0TC-N00 EAFAF-0 389.50C\v – Nominal Flow – NP 0.9 V-006-0TC-NNP FBFBF-0 854.00C\v – Nominal Flow – NC 0.9 V-006-0TC-NNC GBFBF-0 854.00C\v – Nominal Flow – NO 0.9 V-006-0TC-N00 EBFBF-0 587.501 – Nominal Flow – NP 1.5 V-010-0TC-NNP FCFCF-0 1004.001 – Nominal Flow – NC 1.5 V-010-0TC-NNC GCFCF-0 1004.001 – Nominal Flow – NO 1.5 V-010-0TC-N00 ECFCF-0 781.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NP – Normally Open Actuator NC – Normally Closed Actuator NO – No Actuator
TA Series TCM – Modulating Control
Series TCM – Modulating Control
TBV TERMINAL BALANCING AND CONTROL VALVERefer to publication 08.38
SERIES TCM – MODULATING CONTROL
Nominal Size Inches
Aprox. Wgt. Ea.
Lbs ActuatorVictaulic Part Code
kOIL-kIT™ Coil Pack Figure
String Positions 18 – 23 List Price
Z\x – Low Flow – NC1.6 TM V-004-TCM-LNC IAFAF-L $854.001.6 EMO 1 V-004-TCM-LE1 1AFAF-L 895.501.6 EMO 3 V-004-TCM-LE3 2AFAF-L 1015.50
Z\x – Nominal Flow – NC1.6 TM V-004-TCM-NNC IAFAF-0 854.001.6 EMO 1 V-004-TCM-NE1 1AFAF-0 895.501.6 EMO 3 V-004-TCM-NE3 2AFAF-0 1015.50
C\v – Nominal Flow – NC1.9 TM V-006-TCM-NNC IBFBF-0 1038.501.9 EMO 1 V-006-TCM-NE1 1BFBF-0 1064.001.9 EMO 3 V-006-TCM-NE3 2BFBF-0 1181.00
1 – Nominal Flow – NC2.6 TM V-010-TCM-NNC ICFCF-0 1190.502.6 EMO 1 V-010-TCM-NE1 1CFCF-0 1253.502.6 EMO 3 V-010-TCM-NE3 2CFCF-0 1335.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NP – Normally Open Actuator NC – Normally Closed Actuator
VICTAULIC.COM PL2016-GENERAL-C5-8
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
Balancing Control ValvesTA Series TCP – Pressure Independent
TA Series TCP – Pressure Independent
TERMINAL BALANCING CONTROL VALVERefer to publication 08.39
TA SERIES TCP
Nominal Size Inches
Aprox. Wgt. Ea.
Lbs ActuatorVictaulic Part Code
kOIL-kIT™ Coil Pack Figure String Positions 18 – 23 List Price
Z\x – Low Flow2.2 TM V-004-TCP-LNC KAFAF-L $1645.002.2 EMO 1 V-004-TCP-LE1 3AFAF-L 1645.00 2.2 EMO 3 V-004-TCP-LE3 4AFAF-L 1645.00
Z\x – Normal Flow2.2 TM V-004-TCP-NNC KAFAF-0 1645.002.2 EMO 1 V-004-TCP-NE1 3AFAF-0 1645.00 2.2 EMO 3 V-004-TCP-NE3 4AFAF-0 1645.00
Z\x – High Flow3.3 TM V-004-TCP-HNC KAFAF-H 1645.003.3 EMO 1 V-004-TCP-HE1 3AFAF-H 1645.003.3 EMO 3 V-004-TCP-HE3 4AFAF-H 1645.00
C\v – Normal Flow2.5 TM V-006-TCP-NNC KBFBF-0 1729.502.5 EMO 1 V-006-TCP-NE1 3BFBF-0 1729.502.5 EMO 3 V-006-TCP-NE3 4BFBF-0 1729.50
C\v – High Flow3.3 TM V-006-TCP-HNC KBFBF-H 1729.503.3 EMO 1 V-006-TCP-HE1 3BFBF-H 1729.50 3.3 EMO 3 V-006-TCP-HE3 4BFBF-H 1729.50
1 – Normal Flow3.3 TM V-010-TCP-NNC KCFCF-0 1890.503.3 EMO 1 V-010-TCP-NE1 3CFCF-0 1890.503.3 EMO 3 V-010-TCP-NE3 4CFCF-0 1890.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
5-9
Hydronic Balancing ProductsSEC
TION
5
HYD
RO
NIC
BA
LAN
CING
PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
TA Series 7CP Compact Pressure Independent Balancing and Control Valve
TA Series 7CP
COMPACT PRESSURE INDEPENDENT BALANCING AND CONTROL VALVERefer to publication 08.37
TA SERIES 7CP
Nominal Size
Actuator
End Connection Size Inches
Victaulic Part Code
koil-kit™ Coil Pack
Figure String Positions 18
– 22 List PriceInchesInlet
Connection
Vale Body Outlet
Connection
Z\x
EMO 1
Z\x – Female Z\x – Female
V0047CP1FF 5AFAF $1507.50 EMO 3 V0047CP3FF SAFAF 1507.50
TM V0047CPMFF PAFAF 1507.50T NC V0047CPCFF RAFAF 1129.00T NO V0047CPPFF QAFAF 1129.00
EMO 1
Z\x – Male Z\x – Female
V0047CP1MF 5AMAF 1507.50EMO 3 V0047CP3MF SAMAF 1507.50
TM V0047CPMMF PAMAF 1507.50T NC V0047CPCMF RAMAF 1129.00T NO V0047CPPMF QAMAF 1129.00
C\v
EMO 1
Z\x – Female C\v – Female
VA597CP1FF 5AFBF 1659.00 EMO 3 VA597CP3FF SAFBF 1659.00
TM VA597CPMFF PAFBF 1659.00T NC VA597CPCFF RAFBF 1283.00T NO VA597CPPFF QAFBF 1283.00
EMO 1
C\v – Female C\v – Female
V0067CP1FF 5BFBF 1659.00 EMO 3 V0067CP3FF SBFBF 1659.00
TM V0067CPMFF PBFBF 1659.00T NC V0067CPCFF RBFBF 1283.00T NO V0067CPPFF QBFBF 1283.00
EMO 1
C\v – Male C\v – Female
V0067CP1MF 5BMBF 1659.00 EMO 3 V0067CP3MF SBMBF 1659.00
TM V0067CPMMF PBMBF 1659.00T NC V0067CPCMF RBMBF 1283.00T NO V0067CPPMF QBMBF 1283.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Additional end configurations available. Contact Victaulic for details.
EMO 1 – Modulating Mechanical Actuator EMO 3 – 3 Point Mechanical Actuator TM – Modulating Actuator T NC – Normally Closed Actuator T NO – Normally Open Actuator
VICTAULIC.COM PL2016-GENERAL-C5-10
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
TA Series 7CP Compact Pressure Independent Balancing and Control Valve
TA Series 7CP
COMPACT PRESSURE INDEPENDENT BALANCING AND CONTROL VALVERefer to publication 08.37
TA SERIES 7CP
Nominal Size
Actuator
End Connection Size Inches
Victaulic Part Code
koil-kit™ Coil Pack
Figure String Positions 18
– 22 List PriceInchesInlet
Connection
Vale Body Outlet
Connection
1
EMO 1
C\v – Female 1 – Female
VA617CP1FF 5BFCF $1919.00EMO 3 VA617CP3FF SBFCF 1919.00
TM VA617CPMFF PBFCF 1919.00T NC VA617CPCFF RBFCF 1541.00T NO VA617CPPFF QBFCF 1541.00
EMO 1
1 – Female 1 – Female
V0107CP1FF 5CFCF 1919.00EMO 3 V0107CP3FF SCFCF 1919.00
TM V0107CPMFF PCFCF 1919.00T NC V0107CPCFF RCFCF 1541.00T NO V0107CPPFF QCFCF 1541.00
EMO 1
1 – Male
1 – Female
V0107CP1MF 5CMCF 1919.00EMO 3 V0107CP3MF SCMCF 1919.00
TM V0107CPMMF PCMCF 1919.00T NC V0107CPCMF RCMCF 1541.00T NO V0107CPPMF QCMCF 1541.00
1Z\v
EMO 1
1 – Female 1Z\v – Female
VZ907CP1FF 5CFDF 2301.00EMO 3 VZ907CP3FF SCFDF 2301.00
TM VZ907CPMFF PCFDF 2301.00T NC VZ907CPCFF RCFDF 1925.50T NO VZ907CPPFF QCFDF 1925.50
EMO 1
1Z\v – Female 1Z\v – Female
V0127CP1FF 5DFDF 2301.00EMO 3 V0127CP3FF SDFDF 2301.00
TM V0127CPMFF PDFDF 2301.00T NC V0127CPCFF RDFDF 1925.50T NO V0127CPPFF QDFDF 1925.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Additional end configurations available. Contact Victaulic for details.
EMO 1 – Modulating Mechanical Actuator EMO 3 – 3 Point Mechanical Actuator TM – Modulating Actuator T NC – Normally Closed Actuator T NO – Normally Open Actuator
5-11
Hydronic Balancing ProductsSEC
TION
5
HYD
RO
NIC
BA
LAN
CING
PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
TA Series 7CP Accessories
TA Series 7CP Accessories
TA SERIES 7CP FEMALE AND SWEAT TAILPIECE ACCESSORIES
Nominal SizeAssembled Tailpiece
Female Sweat
InchesVictaulic Part
Code List PriceVictaulic Part
Code List PriceZ\x P0047CPF04 + P0047CPS04 +
C\v P0067CPF06 + P0067CPS06 +1 P0107CPF10 + P0107CPS10 +
1Z\v P0127CPF12 + P0127CPS12 + Female Tailpiece Gasket Sweat Tailpiece GasketZ\x P0047CPGSK + P0047CPGSK +
C\v P0067CPGSK + P0067CPGSK +1 P0107CPGSK + P0107CPGSK +
1Z\v P0127CPGSK + P0127CPGSK + Female Tailpiece Reducer Sweat Tailpiece Reducer
Valve Size Inches
Connection Size Inches
Victaulic Part Code List Price
Victaulic Part Code List Price
C\v Z\x P0067CPF04 + – –1 C\v P0107CPF06 + – –
1Z\v 1 P0127CPF10 + – –
TA SERIES 7CP MALE TAILPIECE ACCESSORIES
Nominal Size Nipple Gasket Nut
InchesVictaulic Part
Code List PriceVictaulic Part
Code List PriceVictaulic Part
Code List PriceZ\x P0047CTNPL + P0047CTGSK + P0047CTNUT +
C\v P0067CTNPL + P0067CTGSK + P0067CTNUT +1 P0107CTNPL + P0107CTGSK + P0107CTNUT +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Male tailpieces require all three components for each joint. Female and Sweat tailpieces are one-piece union assemblies with gasket.
TA Series 7CT Control and Balancing Valve
VICTAULIC.COM PL2016-GENERAL-C5-12
SEC
TIO
N 5
H
YDR
ON
IC B
ALA
NCI
NG
PR
OD
UC
TS
Hydronic Balancing Products
TA Series 7CT
COMPACT TERMINAL CONTROL AND BALANCING VALVERefer to publication 08.36
TA SERIES 7CT CONTROL AND BALANCING VALVE
Nominal Size
EMO Actuator
End Connection Size Inches
Victaulic Part Code
kOIL-kIT™ Coil Pack
Figure String Positions 18
– 22 List PriceInchesInlet
Connection
Vale Body Outlet
Connection
Z\x
T NCZ\x – Female Z\x – Female
V0047CTCFF 7AFAF $1231.00T NO V0047CTPFF 6AFAF 1231.00T NC
Z\x – Male Z\x – FemaleV0047CTCMF 7AMAF 1170.00
T NO V0047CTPMF 6AMAF 1170.00T NC
Z\x – Sweat Z\x – Female V0047CTCSF 7ASAF 1231.00
T NO V0047CTPSF 6ASAF 1231.00
C\v
T NCZ\x – Female C\v – Female
VA597CTCFF 7AFBF 1332.00T NO VA597CTPFF 6AFBF 1332.00T NC
C\v – Female C\v – FemaleV0067CTCFF 7BFBF 1332.00
T NO V0067CTPFF 6BFBF 1332.00T NC
C\v – Male C\v – FemaleV0067CTCMF 7BMBF 1245.00
T NO V0067CTPMF 6BMBF 1245.00T NC
C\v – Sweat C\v – Female V0067CTCSF 7BSBF 1332.00
T NO V0067CTPSF 6BSBF 1332.00
1
T NCC\v – Female 1 – Female
VA617CTCFF 7BFCF 1469.50T NO VA617CTPFF 6BFCF 1469.50T NC
1 – Female 1 – FemaleV0107CTCFF 7CFCF 1469.50
T NO V0107CTPFF 6CFCF 1469.50T NC
1 – Male 1 – FemaleV0107CTCMF 7CMCF 1335.50
T NO V0107CTPMF 6CMCF 1335.50T NC
1 – Sweat 1 – Female V0107CTCSF 7CSCF 1469.50
T NO V0107CTPSF 6CSCF 1469.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Additional end configurations available. Contact Victaulic for details.
T NC – Normally Closed Actuator T NO – Normally Open Actuator
5-13
Hydronic Balancing ProductsSEC
TION
5
HYD
RO
NIC
BA
LAN
CING
PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
TA Series 7CT Accessories
TA Series 7CT Accessories
TA SERIES 7CT FEMALE AND SWEAT TAILPIECE ACCESSORIES
Nominal SizeAssembled Tailpiece
Female Sweat
InchesVictaulic Part
Code List PriceVictaulic Part
Code List PriceZ\x P0047CPF04 + P0047CPS04 +
C\v P0067CPF06 + P0067CPS06 +1 P0107CPF10 + P0107CPS10 +
1Z\v P0127CPF12 + P0127CPS12 + Female Tailpiece Gasket Sweat Tailpiece GasketZ\x P0047CPGSK $6.00 P0047CPGSK $6.00
C\v P0067CPGSK 6.00 P0067CPGSK 6.00 1 P0107CPGSK 9.00 P0107CPGSK 9.00
1Z\v P0127CPGSK + P0127CPGSK + Female Tailpiece Reducer Sweat Tailpiece Reducer
Valve Size Inches
Connection Size Inches
Victaulic Part Code List Price
Victaulic Part Code List Price
C\v Z\x P0067CPF04 + – –1 C\v P0107CPF06 + – –
1Z\v 1 P0127CPF10 + – –
TA SERIES 7CT MALE TAILPIECE ACCESSORIES
Nominal Size Male Assembled Tailpiece
InchesVictaulic Part
Code List PriceZ\x P0047CTM04 +
C\v P0067CTM06 +1 P0107CTM10 +
Nominal Size Nipple Gasket Nut
InchesVictaulic Part
Code List PriceVictaulic Part
Code List PriceVictaulic Part
Code List PriceZ\x P0047CTNPL + P0047CTGSK $6.00 P0047CTNUT +
C\v P0067CTNPL + P0067CTGSK 6.00 P0067CTNUT +1 P0107CTNPL + P0107CTGSK 9.00 P0107CTNUT +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Male tailpieces require all three components for each joint. Female and Sweat tailpieces are one-piece union assemblies with gasket.
Balancing Control Valve ActuatorsRefer to publication 08.36 or 08.38
ActuatorBalancing Control Valve
List PriceSeries TC Series TCM Series TCP Series 7CP Series 7CTEMO 1 X X X $600.50EMO 3 X X X 517.50
TM X X X 699.00T NC X X X 600.50T NO X X X 600.50
EMO 1 – Modulating Mechanical Actuator EMO 3 – 3 Point Mechanical Actuator TM – Modulating Actuator T NC – Normally Closed Actuator T NO – Normally Open Actuator
VICTAULIC.COM PL2016-GENERAL-C5-14
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
Series 76X ICSS – Low Lead Balancing Valve
Series 76X
ICSS – LOW LEAD BALANCING VALVERefer to publication 08.51
SERIES 76X
Flow GPM
Victaulic Part Code List Price
Z\x” – Low Differential 2 – 32 psid0.33 F-004-76X-L0A $365.000.50 F-004-76X-L0B 365.000.67 F-004-76X-L0C 365.000.75 F-004-76X-L0D 365.000.88 F-004-76X-L0E 365.001.00 F-004-76X-L0F 365.001.10 F-004-76X-L0G 365.001.25 F-004-76X-L0H 365.001.50 F-004-76X-L0I 365.001.75 F-004-76X-L0J 365.002.00 F-004-76X-L0K 365.002.25 F-004-76X-L0L 365.003.00 F-004-76X-L0M 365.00
Z\x” – High Differential 5 – 60 psid1.00 F-004-76X-H0F $365.001.50 F-004-76X-H0I 365.002.00 F-004-76X-H0K 365.002.50 F-004-76X-H0Y 365.003.00 F-004-76X-H0M 365.004.00 F-004-76X-H0O 365.005.00 F-004-76X-H0Q 365.00
Flow GPM
Victaulic Part Code List Price
C\v” – Low Differential 2 – 32 psid0.33 F-006-76X-L0A $446.000.50 F-006-76X-L0B 446.000.67 F-006-76X-L0C 446.000.75 F-006-76X-L0D 446.000.88 F-006-76X-L0E 446.001.00 F-006-76X-L0F 446.001.10 F-006-76X-L0G 446.001.25 F-006-76X-L0H 446.001.50 F-006-76X-L0I 446.001.75 F-006-76X-L0J 446.002.00 F-006-76X-L0K 446.002.25 F-006-76X-L0L 446.003.00 F-006-76X-L0M 446.003.50 F-006-76X-L0N 446.004.00 F-006-76X-L0O 446.004.50 F-006-76X-L0P 446.005.00 F-006-76X-L0Q 446.006.00 F-006-76X-L0R 446.007.00 F-006-76X-L0S 446.008.00 F-006-76X-L0T 446.00
C\v” – High Differential 5 – 60 psid1.00 F-006-76X-H0F $446.001.50 F-006-76X-H0I 446.002.00 F-006-76X-H0K 446.002.50 F-006-76X-H0Y 446.003.00 F-006-76X-H0M 446.004.00 F-006-76X-H0O 446.005.00 F-006-76X-H0Q 446.006.00 F-006-76X-H0R 446.007.00 F-006-76X-H0S 446.008.00 F-006-76X-H0T 446.009.00 F-006-76X-H0U 446.00
10.00 F-006-76X-H0V 446.0011.00 F-006-76X-H0W 446.0012.00 F-006-76X-H0X 446.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
TA Series 7FC (FUS1ON C)
5-15
Hydronic Balancing ProductsSEC
TION
5
HYD
RO
NIC
BA
LAN
CING
PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
TA Series 7FC (FUS1ON C)
BALANCING AND CONTROL VALVE WITH INDEPENDENT EQM CHARACTERISTICSRefer to publication 08.52
TA SERIES 7FC – STANDARD RECOMMENDED VALVE AND ACTUATOR
Nominal Size Inches Actuator Supply Voltage Input Signal Options *
kOIL-kIT™ Coil Pack Figure
String Positions 18
– 23Victaulic Part Code Price Each
1Z\v
M 24V AC/DC 3 point or on/off IDFDFM V0127FC00M $5391.50N 115V AC 3 point or on/off IDFDFN V0127FC00N 5895.50P 24V AC/DC 0-10V; 4-20mA IDFDFP V0127FC00P 5391.50Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off IDFDFQ V0127FC00Q 7538.50R 115V AC 0-10V; 4-20mA; 3 point or on/off IDFDFR V0127FC00R 8035.50
1Z\x
M 24V AC/DC 3 point or on/off IEFEFM V0147FC00M 6132.50N 115V AC 3 point or on/off IEFEFN V0147FC00N 6636.50P 24V AC/DC 0-10V; 4-20mA IEFEFP V0147FC00P 6132.50Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off IEFEFQ V0147FC00Q 8279.00R 115V AC 0-10V; 4-20mA; 3 point or on/off IEFEFR V0147FC00R 8776.00
2
M 24V AC/DC 3 point or on/off IFFFFM V0207FC00M 8584.50N 115V AC 3 point or on/off IFFFFN V0207FC00N 9088.50P 24V AC/DC 0-10V; 4-20mA IFFFFP V0207FC00P 8584.50Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off IFFFFQ V0207FC00Q 10731.00R 115V AC 0-10V; 4-20mA; 3 point or on/off IFFFFR V0207FC00R 11228.00
2Z\x
M 24V AC/DC 3 point or on/off – V0247FC00M 11503.50N 115V AC 3 point or on/off – V0247FC00N 12007.00P 24V AC/DC 0-10V; 4-20mA – V0247FC00P 11503.50Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0247FC00Q 13673.50R 115V AC 0-10V; 4-20mA; 3 point or on/off – V0247FC00R 14176.00
3
M 24V AC/DC 3 point or on/off – V0307FC00M 12059.00N 115V AC 3 point or on/off – V0307FC00N 12562.00P 24V AC/DC 0-10V; 4-20mA – V0307FC00P 12059.00Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0307FC00Q 14229.00R 115V AC 0-10V; 4-20mA; 3 point or on/off – V0307FC00R 14732.00
4Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0407FC00Q 17303.50R 115V AC 0-10V; 4-20mA; 3 point or on/off – V0407FC00R 17806.50
5Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0507FC00Q 22146.00R 115V AC 0-10V; 4-20mA; 3 point or on/off – V0507FC00R 22648.50
6U 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0607FC00U 28093.00V 115V AC 0-10V; 4-20mA; 3 point or on/off – V0607FC00V 28595.50
* Choice of Input Signals done by adjusting jumpers when installing.
NOTE: For an actuator code description, reference the Actuator Only chart on the next page.
VICTAULIC.COM PL2016-GENERAL-C5-16
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
TA SERIES 7FC – VALVE AND FAIL SAFE FUNCTION ACTUATOR
Nominal Size Inches Actuator Supply Voltage Input Signal Options
kOIL-kIT™ Coil Pack Figure
String Positions 18 – 23
Victaulic Part Code Price Each
1Z\vS 24V AC/DC 0-10V; 4-20mA; 3 point or on/off IDFDFS V0127FC00S $8329.50T 115V AC 0-10V; 4-20mA; 3 point or on/off IDFDFT V0127FC00T 8329.50
1Z\xS 24V AC/DC 0-10V; 4-20mA; 3 point or on/off IEFEFS V0147FC00S 9070.50T 115V AC 0-10V; 4-20mA; 3 point or on/off IEFEFT V0147FC00T 9070.50
2S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off IFFFFS V0207FC00S 11522.50T 115V AC 0-10V; 4-20mA; 3 point or on/off IFFFFT V0207FC00T 11522.50
2Z\xS 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0247FC00S 14470.50T 115V AC 0-10V; 4-20mA; 3 point or on/off – V0247FC00T 14470.50
3S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0307FC00S 15024.00T 115V AC 0-10V; 4-20mA; 3 point or on/off – V0307FC00T 15024.00
4S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0407FC00S 18098.50T 115V AC 0-10V; 4-20mA; 3 point or on/off – V0407FC00T 18098.50
5S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0507FC00S 22941.00T 115V AC 0-10V; 4-20mA; 3 point or on/off – V0507FC00T 22941.00
* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow).
TA SERIES 7FC – VALVE ONLY
Nominal Size Inches
Victaulic Part Code
kOIL-kIT™ Coil Pack Figure String Positions 18 – 23 Price Each
1Z\v V0127FC000 IDFDF0 $3775.501Z\x V0147FC000 IEFEF0 4542.50
2 V0207FC000 IFFFF0 7081.502Z\x V0247FC000 – 9664.00
3 V0307FC000 – 10230.504 V0407FC000 – 13382.505 V0507FC000 – 18340.006 V0607FC000 – 23509.00
TA SERIES 7FC – ACTUATOR ONLY
Nominal Size Inches Actuator *
IMI TA Actuator Nomenclature Supply Voltage Input Signal Options
Victaulic Part Code Price Each
1Z\v – 2M TA-MC55/24 24V AC/DC
3 point or on/off P0127FC00M $1843.502Z\x – 3 Inpt: 3 point or on/off with Adapter P0247FC00M +1Z\v – 2
N TA-MC55/115 115V AC3 point or on/off P0127FC00N 2375.50
2Z\x – 3 3 point or on/off with Adapter P0247FC00N +1Z\v – 2
P TA-MC55/Y 24V AC/DC0-10V; 4-20mA P0127FC00P 1843.50
2Z\x – 3 0-10V; 4-20mA with Adapter P0247FC00P +1Z\v – 2
Q TA-MC100/24 24V AC/DC0-10V; 4-20mA; 3 point or on/off P0127FC00Q 4108.50
2Z\x – 5 0-10V; 4-20mA; 3 point or on/off with Adapter P0247FC00Q +1Z\v – 2
R TA-MC100/115 115V AC0-10V; 4-20mA; 3 point or on/off P0127FC00R 4633.50
2Z\x – 5 0-10V; 4-20mA; 3 point or on/off with Adapter P0247FC00R +1Z\v – 2
S TA-MC100FSE/24 24V AC/DC0-10V; 4-20mA; 3 point or on/off P0127FC00S 4943.50
2Z\x – 5 0-10V; 4-20mA; 3 point or on/off with Adapter P0247FC00S +1Z\v – 2
T TA-MC100FSR/24 24V AC/DC 0-10V; 4-20mA; 3 point or on/off P0127FC00T 4943.50
2Z\x – 5 0-10V; 4-20mA; 3 point or on/off with Adapter P0247FC00T +6 U TA-MC160/24 24V AC/DC 0-10V; 4-20mA; 3 point or on/off with Adapter P0607FC00U +6 V TA-MC160/115 115V AC 0-10V; 4-20mA; 3 point or on/off with Adapter P0607FC00V +
* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
5-17
Hydronic Balancing ProductsSEC
TION
5
HYD
RO
NIC
BA
LAN
CING
PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
Combined Balancing and Control ValvesTA Series 7FP (FUS1ON P)
TA Series 7FP (FUS1ON P)
PRESSURE INDEPENDENT COMBINED BALANCING AND CONTROL VALVE WITH INDEPENDENT EQM CHARACTERISTICSRefer to publication 08.53
TA SERIES 7FP – STANDARD RECOMMENDED VALVE AND ACTUATOR
Nominal Size Inches Actuator Supply Voltage Input Signal Options *
kOIL-kIT™ Coil Pack Figure
String Positions 18
– 23Victaulic Part Code Price Each
1Z\v
M 24V AC/DC 3 point or on/off KDFDFM V0127FP00M $6269.00N 115V AC 3 point or on/off KDFDFN V0127FP00N 6801.50P 24V AC/DC 0-10V; 4-20mA KDFDFP V0127FP00P 6269.50Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KDFDFQ V0127FP00Q 8534.50R 115V AC 0-10V; 4-20mA; 3 point or on/off KDFDFR V0127FP00R 9059.00
1Z\x
M 24V AC/DC 3 point or on/off KEFEFM V0147FP00M 6469.50N 115V AC 3 point or on/off KEFEFN V0147FP00N 7001.50P 24V AC/DC 0-10V; 4-20mA KEFEFP V0147FP00P 6469.50Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KEFEFQ V0147FP00Q 8734.50R 115V AC 0-10V; 4-20mA; 3 point or on/off KEFEFR V0147FP00R 9259.50
2
M 24V AC/DC 3 point or on/off KFFFFM V0207FP00M 11521.50N 115V AC 3 point or on/off KFFFFN V0207FP00N 12053.50P 24V AC/DC 0-10V; 4-20mA KFFFFP V0207FP00P 11521.50Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KFFFFQ V0207FP00Q 13786.50R 115V AC 0-10V; 4-20mA; 3 point or on/off KFFFFR V0207FP00R 14311.00
2Z\x
M 24V AC/DC 3 point or on/off – V0247FP00M 19940.50N 115V AC 3 point or on/off – V0247FP00N 20465.00P 24V AC/DC 0-10V; 4-20mA – V0247FP00P 19940.50Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0247FP00Q 22205.00R 115V AC 0-10V; 4-20mA; 3 point or on/off – V0247FP00R 22730.50
3
M 24V AC/DC 3 point or on/off – V0307FP00M 21582.50N 115V AC 3 point or on/off – V0307FP00N 22108.00P 24V AC/DC 0-10V; 4-20mA – V0307FP00P 21582.50Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0307FP00Q 23848.00R 115V AC 0-10V; 4-20mA; 3 point or on/off – V0307FP00R 24372.50
4Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0407FP00Q 30869.50R 115V AC 0-10V; 4-20mA; 3 point or on/off – V0407FP00R 31394.00
5Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0507FP00Q 47118.50R 115V AC 0-10V; 4-20mA; 3 point or on/off – V0507FP00R 47643.50
6U 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0607FP00U 55342.50V 115V AC 0-10V; 4-20mA; 3 point or on/off – V0607FP00V 55868.00
* Choice of Input Signals done by adjusting jumpers when installing.
NOTE: For an actuator code description, reference the Actuator Only chart on the next page.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C5-18
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
TA SERIES 7FP/7FC – VALVE AND FAIL SAFE FUNCTION ACTUATOR
Nominal Size Inches Actuator * Supply Voltage Input Signal Options
kOIL-kIT™ Coil Pack Figure
String Positions 18 – 23
Victaulic Part Code Price Each
1Z\vS 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KDFDFS V0127FP00S $9369.50T 115V AC 0-10V; 4-20mA; 3 point or on/off KDFDFT V0127FP00T 9369.50
1Z\xS 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KEFEFS V0147FP00S 9569.50T 115V AC 0-10V; 4-20mA; 3 point or on/off KEFEFT V0147FP00T 9569.50
2S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KFFFFS V0207FP00S 14621.50T 115V AC 0-10V; 4-20mA; 3 point or on/off KFFFFT V0207FP00T 14621.50
2Z\xS 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0247FP00S 23034.50T 115V AC 0-10V; 4-20mA; 3 point or on/off – V0247FP00T 23034.50
3S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0307FP00S 24677.00T 115V AC 0-10V; 4-20mA; 3 point or on/off – V0307FP00T 24677.00
4S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0407FP00S 31699.00T 115V AC 0-10V; 4-20mA; 3 point or on/off – V0407FP00T 31699.00
5S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0507FP00S 47948.00T 115V AC 0-10V; 4-20mA; 3 point or on/off – V0507FP00T 47948.00
* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
TA SERIES 7FP – VALVE ONLY
Nominal Size Inches
Victaulic Part Code Price Each
1Z\v V0127FP000 $4426.001Z\x V0147FP000 4626.00
2 V0207FP000 9678.002Z\x V0247FP000 17780.00
3 V0307FP000 19423.004 V0407FP000 26444.505 V0507FP000 42693.506 V0607FP000 49979.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
TA SERIES 7FP – ACTUATOR ONLY
Nominal Size Inches Actuator *
IMI TA Actuator Nomenclature Supply Voltage Input Signal Options
Victaulic Part Code Price Each
1Z\v – 2M TA-MC55/24 24V AC/DC
3 point or on/off P0127FC00M $1843.502Z\x – 3 Inpt: 3 point or on/off with Adapter P0247FC00M +1Z\v – 2
N TA-MC55/115 115V AC3 point or on/off P0127FC00N 2375.50
2Z\x – 3 3 point or on/off with Adapter P0247FC00N +1Z\v – 2
P TA-MC55/Y 24V AC/DC0-10V; 4-20mA P0127FC00P 1843.50
2Z\x – 3 0-10V; 4-20mA with Adapter P0247FC00P +1Z\v – 2
Q TA-MC100/24 24V AC/DC0-10V; 4-20mA; 3 point or on/off P0127FC00Q 4108.50
2Z\x – 5 0-10V; 4-20mA; 3 point or on/off with Adapter P0247FC00Q +1Z\v – 2
R TA-MC100/115 115V AC0-10V; 4-20mA; 3 point or on/off P0127FC00R 4633.50
2Z\x – 5 0-10V; 4-20mA; 3 point or on/off with Adapter P0247FC00R +1Z\v – 2
S TA-MC100FSE/24 24V AC/DC0-10V; 4-20mA; 3 point or on/off P0127FC00S 4943.50
2Z\x – 5 0-10V; 4-20mA; 3 point or on/off with Adapter P0247FC00S +1Z\v – 2
T TA-MC100FSR/24 24V AC/DC 0-10V; 4-20mA; 3 point or on/off P0127FC00T 4943.50
2Z\x – 5 0-10V; 4-20mA; 3 point or on/off with Adapter P0247FC00T +6 U TA-MC160/24 24V AC/DC 0-10V; 4-20mA; 3 point or on/off with Adapter P0607FC00U +6 V TA-MC160/115 115V AC 0-10V; 4-20mA; 3 point or on/off with Adapter P0607FC00V +
* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
5-19
Hydronic Balancing ProductsSEC
TION
5
HYD
RO
NIC
BA
LAN
CING
PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
KOIL-KIT™ Coil Packages
Series 799/79V KOIL-KIT™ Coil Pack
The Victaulic KOIL-KIT™ Coil Pack is a custom packaged kit that can include Series 78Y Y-Strainer/Ball Valve or Series 78T Ball Valve Union Combination, two Coil Hoses, a Series 78U Union Port Fitting, and a balancing valve Series 78K, 787 or 786.
There are two kits available: Series 799 KOIL-KIT™ Coil Pack or Series 79V KOIL-KIT™ Coil Pack assembled with your ATC Valve (not manufactured by Victaulic).
Please contact your local Victaulic representative to discuss options and ordering to project specifications.
Below is a list of available components and end connection options to choose from. For any additional requirements please call your local Victaulic Sales representative.
ATC
OR
OR
SUPPLY
RETURN
Series 78UCoil Hose (2)
Coil Hose (1)
TA Series 786/787Series 78K
Series 78Y Series 78T
COIL
Select one drain valve option from below.
Inlet Outlet End Con�g.
❏ ½
❏ ¾
❏ 1
❏ 1 ¼
❏ 1 ½
❏ 2
❏ ½
❏ ¾
❏ 1
❏ 1 ¼
❏ 1 ½
❏ 2
❏ ½
❏ ¾
❏ 1
❏ 1 ¼
❏ 1 ½
❏ 2
❏ ½
❏ ¾
❏ 1
❏ 1 ¼
❏ 1 ½
❏ 2
❏ ½
❏ ¾
❏ 1
❏ 1 ¼
❏ 1 ½
❏ 2
❏ ½
❏ ¾
❏ 1
❏ 1 ¼
❏ 1 ½
❏ 2
❏ ½
❏ ¾
❏ 1
❏ 1 ¼
❏ 1 ½
❏ 2
❏ ½
❏ ¾
❏ 1
❏ 1 ¼
❏ 1 ½
❏ 2
❏ swt x swt union❏ swt x fem union❏ swt x male union❏ fem x swt union❏ fem x fem union❏ fem x male union❏ Plynx x swt union❏ Plynx x fem union❏ Plynx x male union❏ Plynx x Plynx
❏ male union x swt
❏ male union x fem
❏ male union x Plynx
❏ fem union x swt
❏ fem union x fem
❏ fem union x Plynx
❏ swt x swt union❏ swt x fem union❏ swt x male union❏ fem x swt union❏ fem x fem union❏ fem x male union❏ Plynx x swt union❏ Plynx x fem union❏ Plynx x male union
❏ fem x fem
❏ male x fem swivel
❏ male x male swivel
❏ male x fem swivel
❏ male x male swivel
❏ swt x swt
Double reduction available
Series 78T Series 78Yor❑ ❑
Select port �tting size and end con�g.
Inlet Outlet End Con�g.
Triple reduction available
Series 78U❑
Select coil hose option.
Length End Con�g.
Length End Config.
Coil Hose (1)
Connect hoses
❑
❑
❑
Coil Hose (2)
Select one balancing valve option from below.
Inlet Outlet End Con�g. Inlet x Outlet End Con�g. Inlet x Outlet End Con�g.
Triple reduction inlet available
Series 78K❑ TA Series 786❑ TA Series 787❑
❏ 12"
❏ 24"
❏ 36"
❏ 12"
❏ 24"
❏ 36"
Series 799/79V KOIL-KIT™ Coil Pack
❏ male x fem w/adapt.
❏ male x fem w/adapt.
VICTAULIC.COM PL2016-GENERAL-C5-20
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
Series 793 Differential Pressure Controller – Threaded
Differential Pressure Controllers
TA Series 793
STAP DIFFERENTIAL PRESSURE CONTROLLER THREADED ENDRefer to publication 08.29
TA SERIES 793 DIFFERENTIAL PRESSURE CONTROLLER
SizeAprox.
Wgt. Ea. Series 793 (Threaded)
Nominal Size Inches
Actual Outside Diameter Inches Lbs.
Differential Pressure Range
psiVictaulic Part
Number IMI TA Code Price EachZ\x 0.840 2.4 1.45 – 8.70 V-004-793-CBV 52 266-015 $979.00C\v 1.050 2.6 1.45 – 8.70 V-006-793-CBV 52 266-020 991.501 1.315 2.9 1.45 – 8.70 V-010-793-CBV 52 266-025 1007.00
1Z\v 1.660 5.7 2.90 – 11.6 V-012-793-CBV 52 266-032 1306.001Z\x 1.900 6.4 2.90 – 11.6 V-014-793-CBV 52 266-040 1508.50
2 2.375 7.7 2.90 – 11.6 V-020-793-CBV 52 266-050 1795.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
TA Series 794 Differential Pressure Controller – Flanged
TA Series 794
STAP DIFFERENTIAL PRESSURE CONTROLLER – FLANGED END (CLASS 150, ASME/ANSI B16.42)Refer to publication 08.29
TA SERIES 794 DIFFERENTIAL PRESSURE CONTROLLER – (2.9 – 11.6 PSI) DIFFERENTIAL PRESSURE RANGE
SizeAprox.
Wgt. Ea. Series 794 (Flanged)
Nominal Size Inches
Actual Outside Diameter Inches Lbs.
Differential Pressure Range
psiVictaulic Part
Number IMI TA Code Price Each2Z\x 2.875 46.3 2.9 – 11.6 V-024-794-116 52 266-065 $6862.50
3 3.500 52.9 2.9 – 11.6 V-030-794-116 52 266-080 7343.004 4.500 72.8 2.9 – 11.6 V-040-794-116 52 266-090 8957.00
TA SERIES 794 DIFFERENTIAL PRESSURE CONTROLLER – (5.8 – 23.2) PSI DIFFERENTIAL PRESSURE RANGE
SizeAprox.
Wgt. Ea. Series 794 (Flanged)
Nominal Size Inches
Actual Outside Diameter Inches Lbs.
Differential Pressure Range
psiVictaulic Part
Number IMI TA Code Price Each2Z\x 2.875 46.3 5.8 – 23.2 V-024-794-223 52-266-165 $6862.50
3 3.500 52.9 5.8 – 23.2 V-030-794-223 52-266-180 7343.004 4.500 72.8 5.8 – 23.2 V-040-794-223 52-266-190 8957.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
TA Series 793 Insulation Kits
TA Series 793
INSULATION kITSRefer to publication 08.29
TA SERIES 793 – INSULATION kITS
Size Series 793 Insulation kitNominal Size
Inches Victaulic Part Number IMI TA Code Price EachZ\x – 1 P-006-793-INS 52 265-225 $248.00
1Z\v – 2 P-012-793-INS 52 265-250 292.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
5-21
Hydronic Balancing ProductsSEC
TION
5
HYD
RO
NIC
BA
LAN
CING
PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
TA Differential Pressure Controller Accessories
AccessoriesRefer to publication 08.29
Capillary Tube Capillary Extension Kit
Setting Tool
TA Series 793 Plastic Z\x– 1”
TA Series 794 Plastic 1Z\v– 2”
TA DIFFERENTIAL PRESSURE CONTROLLER ACCESSORIES
Nominal Size Inches Description
Victaulic Part Code
IMI TA Code List Price
Capillary Pipe and Extension kit – Capillary Tube P-000-793-001 – $159.00– Capillary Extension Kit K-002-793-001 – 1937.00
Setting Tool 3 TA Series 793 P-004-793-KEY 52-265-305 $1158.005 TA Series 794 P-030-794-KEY 52-265-304 1158.00
Handwheels Z\x – 1 TA Series 793 P-004-793-HDW – $311.50
1Z\v – 2 TA Series 794 P-012-793-HDW – 311.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C5-22
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
Series 736 TA Link Differential Pressure Sensor
Balancing Instruments
Series 736
TA LINk DIFFERENTIAL PRESSURE SENSOR
0 – 10 V OutputRefer to publication 08.16
SERIES 736 – TA LINk DIFFERENTIAL PRESSURE SENSOR
Range kPa
Victaulic Part Code
IMI TA Code List Price
0 – 40 V-000-736-000 52-010-004 $7431.000 – 100 V-000-736-001 52-010-010 7431.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Universal Gauge Meter Conversion Kit
Universal Gauge Meter Conversion Kit
UNIVERSAL GAUGE METER CONVERSION kIT †
Victaulic Part Code
IMI TA Code List Price
K-000-738-100 – $1033.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† The kit includes 2 probes, necessary fittings, flow wheel and instruction sheet.
TA Series 73M CMI
5-23
Hydronic Balancing ProductsSEC
TION
5
HYD
RO
NIC
BA
LAN
CING
PR
OD
UC
TS
VICTAULIC.COM PL2016-GENERAL-C
TA Series 734 SCOPE Premium/Scope Balancing Instrument
TA Series 734
SCOPE PREMIUM/SCOPE BALANCING INSTRUMENTRefer to publication 08.16
TA Series 734 SCOPE
TA Series 734 SCOPE Premium
TA SERIES 734 SCOPE PREMIUM/SCOPE BALANCING INSTRUMENT
DescriptionVictaulic Part Code
IMI TA Code List Price
TA Series 734 SCOPE Premium V-000-734-000 52-199-014 $46008.00TA Series 734 SCOPE V-000-734-002 52-199-214 32204.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C5-24
Hydronic Balancing ProductsSE
CTI
ON
5
HYD
RO
NIC
BA
LAN
CIN
G P
RO
DU
CTS
SECTION 6 – Plain End Couplings and Fittings
Plain End Couplings and Fittings
6-1VICTAULIC.COM PL2016-GENERAL-C
Style 99 Roust-A-Bout Coupling
Products for Plain End Steel Pipe
Roust-A-Bout Coupling
STYLE 99Refer to publication 14.02
STYLE 99 – GRADE “E” OR “T” GASkET
PIPE Inches
Aprx. Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or “T” Gasket
Plated Bolt & Nut
Nominal Size
Outside Diameter Lbs.
Price Each Size InchesPainted Galv.
1 1.315 1.7 $225.50 $275.00 C\, x 2
1Z\x 1.900 3.6 225.50 297.00 Z\x x 2Z\x
2 2.375 5.3 266.00 357.50 B\, x 3Z\v
2Z\x 2.875 5.7 295.50 399.50 B\, x 3Z\v
3 3.500 8.7 402.50 549.50 C\v x 4Z\v
3Z\x 4.000 10.6 488.50 668.50 C\v x 4Z\v
4 4.500 12.8 543.50 756.50 C\v x 4Z\v
5 5.563 17.3 712.50 990.50 M\, x 56 6.625 23.2 899.00 1264.50 1 x 68 8.625 37.2 1427.50 1987.00 M\, x 5
10 10.750 48.2 1790.00 2538.50 M\, x 512 12.750 60.0 2284.50 3225.00 1 x 6Z\x
14 14.000 89.0 3792.50 4130.00 1 x 6Z\x
16 16.000 105.0 5554.00 6744.50 1 x 6Z\x
18 18.000 122.4 8325.50 9712.00 1 x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Gaskets for Style 99 Couplings
Gaskets for Style 99 Couplings
Nominal Size Standard Gaskets Special Gaskets
InchesStandard Grade
“E” or “T”Grade “L” Silicone
Grade “A” White Nitrile
Grade “O” Fluoroelastomer
1 * $48.00 $290.50 $129.00 –1Z\x * 58.50 344.00 295.00 $360.50
2 49.00 346.00 + 659.002Z\x 58.50 408.50 + 1130.00
3 65.00 591.50 + 877.503Z\x 74.50 + + +
4 85.00 1120.00 + 1254.505 130.00 1153.50 + 1904.506 117.50 1338.50 + 2581.508 171.00 1372.00 + 3861.00
10 220.00 1502.50 + +12 306.50 1847.50 + 4857.0014 459.50 – – –16 495.00 – – –18 495.00 – – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Style 77 gasket.
VICTAULIC.COM PL2016-GENERAL-C6-2
Products for Plain End IPS Steel PipeSE
CTI
ON
6
PR
OD
UC
TS F
OR
PLA
IN E
ND
STE
EL P
IPE
Plated Trackhead Bolts and Nuts
Plated Trackhead Bolts and Nuts
PLATED TRACkHEAD BOLTS AND NUTS
Bolt and Nut Size
Inches Price EachC\, x 2 $15.00Z\x x 2Z\x 18.00
2C\v 18.503 20.00
3Z\v 20.00B\, x 2C\v 18.50
3Z\v 25.003Z\x 25.00
4 28.504Z\v 32.00
C\v x 4Z\v 36.505 54.50
5C\v 756.50M\, x 5 48.00
5Z\x 51.006Z\x 79.00
Bolt and Nut Size
Inches Price Each1 x 3Z\x $58.50
5 102.005Z\x 87.00
6 75.006Z\x 71.50
1Z\, x 4 164.005Z\x 164.00
1Z\v x 3Z\x 178.005Z\x 194.00
1C\, x 5C\v 230.001Z\x x 4Z\x 321.00
5C\v 243.001C\v x 6 569.001M\, x 6 778.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
No(s). 40-P, 42-P and 43-P Adapter Nipples
Adapter Nipples
No. 40-P
No. 42-P
No. 43-P
ADAPTER NIPPLES – PLAIN TO THREADED, PLAIN TO BEVELED, OR PLAIN TO GROOVED
PIPE Inches
No. 40-P Plain to Threaded Steel No. 42-P Plain to Beveled Steel No. 43-P Plain to Grooved Steel
Size End to End
Aprx. Wgt. Each
Lbs
Price Each
Black Galvanized1 3 0.9 $22.00 +
1Z\x 4 0.9 45.50 +2 4 1.2 43.00 +
2Z\x 4 1.9 64.00 +3 4 2.5 74.00 +4 6 5.4 125.00 $323.50
6 * 6 9.5 451.00 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
6-3
Products for Plain End IPS Steel PipeSEC
TION
6
PR
OD
UC
TS FO
R P
LAIN
END
STEEL PIP
E
VICTAULIC.COM PL2016-GENERAL-C
Plain End Fittings –No. 10-P – 90° Elbow, No. 11-P – 45° Elbow
Plain End FittingsRefer to publication 14.04
No. 10-P
No. 11-P
PLAIN END FITTINGS – 90° ELBOW OR 45° ELBOW
Nominal Size
90° Elbow No. 10-P
45° Elbow No. 11-P
Inches
Aprx. Weight Each
Lbs
Price Each Aprx. Weight Each
Lbs
Price Each
Painted Galv. Painted Galv.1 0.6 $244.50 $271.00 0.6 + +
1Z\x 1.4 (sw) 244.50 271.00 1.0 (sw) $203.00 $220.002 2.9 (sw) 244.50 271.00 1.4 (sw) 203.00 220.00
2Z\x 3.9 (sw) 244.50 303.50 2.3 (sw) 203.00 246.003 6.2 (sw) 323.00 408.00 4.3 (sw) 295.50 372.50
3Z\x 7.0 (sw) + + 5.5 (sw) + +4 9.9 (sw) 432.50 524.50 7.0 (sw) 419.50 538.005 20.4 1341.00 1463.00 18.0 (sw) + +6 20.4 1076.00 + 11.9 993.50 1238.008 42.0 (sw) 1766.50 + 28.5 (sw) + +
10 50.0 (sw) + + 41.0 (sw) + +12 156.0 (sw) + + 57.8 (sw) + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
No. 20-P – Tee, No. 61-P Bull Plug
No. 20-P
No. 61-P
PLAIN END FITTINGS – TEE OR BULL PLUG
Nominal Size
Tee No. 20-P
Bull Plug No. 61-P
Inches
Aprx. Weight Each
Lbs
Price Each Aprx. Weight Each
Lbs
Price Each
Painted Galv. Electroplated 1 1.0 (sw) + + 0.7 +
1Z\x 1.7 (sw) $320.00 $357.00 1.2 $836.002 3.0 (sw) 320.00 357.00 2.0 +
2Z\x 6.8 (sw) 320.00 357.00 3.0 +3 9.0 (sw) 349.00 418.50 4.5 1401.00
3Z\x 12.5 (sw) + + 6.0 +4 11.9 490.50 591.50 7.5 +5 17.1 (sw) 826.50 + 11.5 +6 29.5 1115.00 1367.50 17.0 8786.008 71.5 (sw) 2269.00 + 29.0 +
10 116.0 (sw) + + 48.0 +12 120.0 (sw) + + 60.0 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
* Galvanized quoted on application.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
VICTAULIC.COM PL2016-GENERAL-C6-4
Products for Plain End IPS Steel PipeSE
CTI
ON
6
PR
OD
UC
TS F
OR
PLA
IN E
ND
STE
EL P
IPE
No. 33-P – Wye, No. 30-P – Lateral
Plain End FittingsRefer to publication 14.04
No. 33-P
No. 30-P
PLAIN END FITTINGS – WYE OR LATERAL
Nominal Size
Wye No. 33-P
Lateral No. 30-P
Inches
Aprx. Weight Each
Lbs
Price Each Aprx. Weight Each
Lbs
Price Each
Painted Galv. Painted Galv.1 1.1 + + 3.5 + +
1Z\x 1.8 + + 3.5 + $513.502 2.9 + + 5.1 $513.50 +
2Z\x 9.0 + + 9.3 + +3 8.5 + + 12.8 752.50 +
3Z\x 10.0 + + 20.0 + +4 14.0 + + 19.0 1053.00 1386.505 21.6 + + 30.0 + +6 31.2 + + 43.3 1676.00 2377.008 36.0 + + 92.0 + +
10 52.0 + + 106.0 2960.00 +12 81.2 + + 167.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application, other sizes available.
Reducing Tees, True Ys, Crosses and Laterals are segmentally welded steel.
No. 35-P – Cross
No. 35-P
PLAIN END FITTINGS – CROSS
Nominal Size
Cross No. 35-P
Inches
Aprx. Weight Each
Lbs
Price Each
Painted Galv.1 1.7 + +
1Z\x 3.5 + +2 5.2 + +
2Z\x 5.4 + +3 8.5 + +
3Z\x 9.0 + +4 10.8 + +5 20.0 + +6 30.0 + +8 66.4 + +
10 103.0 + +12 158.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application, other sizes available.
Reducing Tees, True Ys, Crosses and Laterals are segmentally welded steel.
6-5
Products for Plain End IPS Steel PipeSEC
TION
6
PR
OD
UC
TS FO
R P
LAIN
END
STEEL PIP
E
VICTAULIC.COM PL2016-GENERAL-C
No. 53-P – Swaged Nipples
Swaged Nipples
NO. 53-PRefer to publication 14.04
NO. 53-P – SWAGED NIPPLES *
Nominal Size Inches
Aprx. Wgt. Each
LbsPrice Each
Electroplated1Z\x x 1 1.2 +
2 x 1 2.0 +1Z\x 2.0 +
2Z\x x 1 3.0 +1Z\x 3.0 +
2 3.0 +3 x 1 4.5 +
1Z\x 4.5 +2 4.5 +
2Z\x 4.5 +
3Z\x x 3 6.8 +4 x 1 7.5 +
1Z\x 7.5 +2 7.5 +
2Z\x 7.5 +3 7.5 +
3Z\x 7.5 +5 x 2 11.5 +
3 11.5 +4 11.5 +
Nominal Size Inches
Aprx. Wgt. Each
LbsPrice Each
Electroplated6 x 1 17.0 +
1Z\x 16.0 +2 16.0 +
2Z\x 17.0 +3 17.0 +
3Z\x 17.0 +4 17.0 +5 17.5 +
8 x 3 29.0 +4 29.0 +5 29.0 +6 29.0 +
10 x 3 1.2 +4 2.0 +6 2.0 +8 3.0 +
12 x 6 3.0 +8 3.0 +
10 4.5 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application, other sizes available.
All weights are approximate and subject to change.
No. 25-P – Reducing Tee
VICTAULIC.COM PL2016-GENERAL-C6-6
Products for Plain End IPS Steel PipeSE
CTI
ON
6
PR
OD
UC
TS F
OR
PLA
IN E
ND
STE
EL P
IPE
Reducing Tees
NO. 25-PRefer to publication 14.04
NO. 25-P – REDUCING TEE
Nominal SizeReducing Tee
No. 25-P
Inches Run x Branch
Aprx. Wgt. Each
Lbs
Price Each
Painted Galv.1Z\x x 1Z\x x 1 2.2 + +
2 x 2 x 1 2.9 + +1Z\x 3.1 + +
3 x 3 x 1 6.7 + +1Z\x 6.9 $330.00 $433.00
2 7.1 + 439.004 x 4 x 1 10.9 + +
1Z\x 11.1 + +2 11.3 426.00 +
2Z\x 11.6 494.00 +3 11.9 506.50 +
6 x 6 x 2 24.7 + +3 25.4 + +4 26.2 + 1213.00
8 x 8 x 2 42.0 + +3 44.0 + +4 46.0 + +5 48.0 + +6 50.0 1512.00 +
10 x 10 x 4 74.0 + +6 78.0 + +8 86.0 + +
12 x 12 x 6 112.0 + +8 118.0 + +
10 130.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Reducing Tees, True Ys, Crosses and Laterals are segmentally welded steel.
6-7
Products for Plain End IPS Steel PipeSEC
TION
6
PR
OD
UC
TS FO
R P
LAIN
END
STEEL PIP
E
VICTAULIC.COM PL2016-GENERAL-C
Style 995N HDPE Coupling
Products for Plain End HDPE Plastic PipeSee Section 2 – for Style 920/920N Mechanical-T Outlets.
HDPE Coupling
STYLE 995NRefer to publication 19.02
STYLE 995N – GRADE “E” OR “T” GASkET
PIPE Inches
Aprx. Weight Each
COUPLING COMPLETE † With Grade “E” or “T”
GasketGrade “E” or
“T”Plated
Bolt & Nut
Nominal Size
Outside Diameter Lbs
Price EachGasket Only
Size InchesPainted Plated
2 2.375 3.5 $509.00 $564.00 $49.00 Z\x x 33 3.500 7.7 801.00 921.50 65.00 Z\x x 3Z\v
4 4.500 11.6 1103.50 + 85.00 Z\x x 3Z\v
5 5.563 15.0 1197.50 1698.00 130.00 B\, x 46 6.625 16.4 1439.00 2246.50 117.50 B\, x 48 8.625 24.9 1653.50 2804.50 171.00 B\, x 4Z\v
10 10.750 37.4 1974.50 3326.50 220.00 C\v x 6Z\v
12 12.750 47.8 2276.00 + 306.50 M\, x 6Z\x
14 14.000 81.0 5377.50 + 459.50 1 x 7 #16 16.000 100.0 9111.50 + 928.50 1 x 7 #18 18.000 127.0 11146.50 + 972.00 1 x 7 #20 20.000 142.0 15162.50 + 1035.50 1 x 7 #
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
* Coupling for High Density Polyethylene Pipe. Style 99 gaskets fit Style 995N couplings up to 12”. # Supplied with T-bolts and rocker washer.
NOTE: See Spare Parts Section for spare part prices.
STYLE 995N – HDPE COUPLING kITS INCLUDES PLATED BOLT AND NUT, HARDENED WASHER AND INSTRUCTION SHEET
Size Inches Price Each
2 $110.003 125.504 125.505 154.506 154.508 154.50
10 284.5012 295.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
VICTAULIC.COM PL2016-GENERAL-C7-2
Products for Plain End HDPE Plastic PipeSE
CTI
ON
7
PR
OD
UC
TS F
OR
PLA
IN E
ND
HD
PE
PLA
STI
C P
IPE
Style 905 Coupling for HDPE Pipe
Coupling for HDPE Pipe
STYLE 905Refer to publication 19.07
STYLE 905 – GRADE "E" OR "T" GASkET
PIPE inches
Approx. Weight Each
COUPLING COMPLETE
With Grade “E” or “T” Gasket
Grade “E”
or “T” Gasket Only
Fluoropolymer Coated Bolt/Nut/Washer §
Stainless Steel
Retaining Ring †
Nominal Size
Outside Diameter lb
Price Each Price Each
Size inches
Price Each
Price EachPainted Coated *
2 2.375 5.5 $267.50 + $78.00 Z\x x 3Z\v $28.00 $76.00
3 3.500 8.5 327.50 + 81.50 B\, x 3Z\x 42.50 124.00
4 4.500 13.1 419.50 + 136.00 B\, x 4Z\v 47.50 159.00
6 6.625 19.4 569.50 + 172.50 C\v x 5Z\v 91.00 238.00
8 8.625 25.0 950.00 + + C\v x 6Z\v + +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
§ Price includes one bolt, nut and washer for coupling sizes 2 – 4” and one bolt and nut and two washers in coupling sizes 6 – 8”.
† Set of two required for Style 905 coupling
* Fusion bonded epoxy and galvanized finishes available. Contact Victaulic for pricing.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
Coupling for HDPE-to-Steel Pipe
STYLE 907Refer to publication 19.10
STYLE 907 – GRADE “E” OR “T” GASkET
PIPE inches
Approx. Weight Each
COUPLING COMPLETE With Grade “E” or “T”
Gasket
Grade “E” or “T” Gasket Only
Fluoropolymer Coated
Bolt/Nut/Washer §
Stainless Steel
Retaining Ring
Nominal Size
Outside Diameter lb
Price EachPrice Each
Size inches Price EachPainted Coated *
2 2.375 4.7 $371.50 + $78.00 Z\x x 3Z\v $76.00
3 3.500 6.6 534.50 + 81.50 B\, x 3Z\x 124.00
4 4.500 9.4 616.00 + 176.00 B\, x 4Z\v 159.00
6 6.625 13.8 901.00 + 172.50 C\v x 5 238.00
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Fusion bonded epoxy and galvanized finishes available. Contact Victaulic for pricing.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
§ Price includes one bolt, nut and washer for all size couplings.
7-3
Products for Plain End HDPE Plastic PipeSEC
TION
7
PR
OD
UC
TS FO
R P
LAIN
END
HD
PE
PLA
STIC
PIPE
VICTAULIC.COM PL2016-GENERAL-C
Coupling for Double Grooved HDPE Pipe
STYLE 908Refer to publication 19.09
8 – 18”
20 – 36”
STYLE 908 – GRADE “E” OR “T” GASkET
PIPE inches
Approx. Weight Each
COUPLING COMPLETE With Grade “E” or “T”
Gasket
Grade “E” or “T” Gasket Only
Fluoropolymer Coated Bolt/Nut/Washer Set §
Nominal Size
Outside Diameter lb
Price EachPrice Each
Size inches Price EachPainted Coated *
8 8.625 59.0 + + + B\, x 5 +
10 10.750 81.0 + + + C\v x 5 +
12 12.750 90.0 + + + C\v x 5 +
14 14.000 137.0 + + + M\, x 5Z\x +
16 16.000 184.0 + + + M\, x 5Z\x +
18 18.000 204.0 + + + M\, x 5Z\x +
20 † 20.000 247.0 + + + M\, x 5Z\x +
22 † 22.000 277.0 + + + M\, x 5Z\x +24 † 24.000 366.0 + + + 1 x 6 +28 † 28.000 455.0 + + + 1 x 6 +30 † 30.000 525.0 + + + 1Z\, x 7 +
32 † 32.000 594.0 + + + 1Z\, x 7 +
36 † 36.000 726.0 + + + 1Z\v x 7 +
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Fusion bonded epoxy and galvanized finishes available. Contact Victaulic for pricing.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
§ Each set includes 4 bolts, 4 nuts, and 8 washers.
† Not all sizes are available for immediate delivery as of this printing. Contact Victaulic for availability/delivery information.
Style 908 Coupling for Double Grooved HDPE PipeStyle 994 HDPE Flange Adapter
Style 994 HDPE Flange AdapterStyle 997 HDPE-to-Steel Transition Coupl
Transition Coupling
STYLE 997 (HDPE TO STEEL)Refer to publication 19.03
STYLE 997 – GRADE “E” OR “T” GASkET
PIPE Inches
Aprx. Weight Each
COUPLING COMPLETE † With Grade “E” or “T” Gasket
Plated Bolt & Nut
Nominal Size
Outside Diameter Lbs
Price Each Size InchesPainted Plated
2 2.375 2.8 $498.50 $526.00 C\, x 23 3.500 6.6 786.00 855.00 Z\x x 2C\v
4 4.500 8.7 1090.00 1199.00 Z\x x 2C\v
5 5.563 11.5 1251.00 + B\, x 3Z\v
6 6.625 14.8 1411.50 1580.50 B\, x 3Z\v
8 8.625 21.7 1818.50 2068.00 B\, x 3Z\v
10 10.750 34.3 2172.00 + C\v x 5Z\x
12 12.750 37.5 2501.00 + M\, x 5Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
Style 77 gaskets fit Style 997 couplings.
The HDPE Transition coupling is supplied with painted or plated ductile iron housing. Grade “E” gaskets (Grade “T” available) and plated trackhead bolts and nuts.
VICTAULIC.COM PL2016-GENERAL-C7-4
Products for Plain End HDPE Plastic PipeSE
CTI
ON
7
PR
OD
UC
TS F
OR
PLA
IN E
ND
HD
PE
PLA
STI
C P
IPE
Fittings for HDPE Plain End Pipe
90° ElbowRefer to publication 19.11
No. H10
90° ELBOW
Nom. Size C - E SDR 7 SDR 11 SDR 17
inches
Approx. Wgt. Ea.
Lbs Price Each
Approx. Wgt. Ea.
Lbs Price Each
Approx. Wgt. Ea.
Lbs Price Each2 4.38 0.8 + 0.5 $43.00 0.3 $43.003 5.25 2.0 + 1.3 72.50 0.9 72.50
236.4 6.00 3.7 + 2.5 88.50 1.7 88.506 7.50 10.1 + 6.8 236.00 4.6 236.00
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
45° ElbowRefer to publication 19.11
No. H11
45° ELBOW
Nom. Size C - E SDR 7 SDR 11 SDR 17
inches
Approx. Wgt. Ea.
Lbs Price Each
Approx. Wgt. Ea.
Lbs Price Each
Approx. Wgt. Ea.
Lbs Price Each2 3.63 0.6 + 0.4 $49.00 0.3 $49.003 3.88 1.5 + 1.0 71.50 0.7 71.504 4.50 2.7 + 1.9 88.00 1.2 88.006 4.88 6.6 + 4.4 220.50 3.0 220.50
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
TeeRefer to publication 19.11
No. H20
TEE
Nom. Size C - E SDR 7 SDR 11 SDR 17
inches
Approx. Wgt. Ea.
Lbs Price Each
Approx. Wgt. Ea.
Lbs Price Each
Approx. Wgt. Ea.
Lbs Price Each2 4.38 1.0 + 0.7 $53.50 0.5 $53.503 5.25 2.5 + 1.7 76.00 1.1 76.004 6.00 4.7 + 3.2 111.00 2.1 111.006 7.50 12.3 + 8.3 277.50 5.5 277.50
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Concentric ReducerRefer to publication 19.11
No. H50
CONCENTRIC REDUCER
Nom. Size E - E SDR 7 SDR 11 SDR 17
inches inches
Approx. Wgt. Ea.
Lbs Price Each
Approx. Wgt. Ea.
Lbs Price Each
Approx. Wgt. Ea.
Lbs Price Each3 x 2 7.00 1.0 + 0.7 $45.50 0.4 $45.504 x 2 8.00 1.6 + 1.1 67.00 0.7 67.00
3 8.00 2.0 + 1.4 67.00 0.9 67.006 x 3 9.50 4.2 + 2.8 167.00 1.9 167.00
4 9.50 4.7 + 3.2 167.00 2.1 167.00
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
7-5
SECTIO
N 7
PR
OD
UC
TS FO
R P
LAIN
END
HD
PE
PLA
STIC
PIPE
VICTAULIC.COM PL2016-GENERAL-C
Products for Plain End HDPE Plastic Pipe
Flange Adapter for HDPE Pipe
STYLE 994Refer to publication 19.04
STYLE 994 – GRADE “E” OR “T” GASkET
PIPE Inches
HDPE FLANGE COMPLETE † With Grade “E” or “T” Gasket
Grade “E” or “T” Gasket
Nominal Size
Outside Diameter
Aprx. Weight Each
Lbs Price Each Price Each4 4.500 12.5 $1182.50 $101.506 6.625 17.3 1534.50 160.508 8.625 30.8 2042.00 173.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
HDPE Flange has ductile iron housing. Standard flange bolts, for ANSI Class 125 or 150 mating flanges must be supplied by the installer.
Refuse-to-Fuse™ Cut Grooving Tool for HDPE Pipe
MODEL CG3100/3300/3500Refer to publication 24.06
Refuse-to-Fuse™ cut grooving tools are designed for grooving 8 – 36" HDPE (DR7 – DR17) pipe. The tool mounts on the exterior pipe wall and cuts and grooves the end of the pipe in a single operation.
The CG3100 and CG3300 tools connect directly to a 120-volt, 50-60 Hz, 20-amp power source. An o ptional 220-volt single phase, 50-60 Hz model is also available.
The CG3500 tool connects directly to a 220-volt single phase, 50-60 Hz, 20-amp power source.
Tool Model Part NumberTool Weight
lbRental
Per Month CG3100 – 8 – 18”/250 – 450 mm R0003100CG 430 $2031.50CG3300 – 16 – 26”/400 – 630 mm R0003300CG 580 2031.50CG3500 – 24 – 36”/630 – 800 mm R0003500CG 715 2031.50
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material8 10
250
28012
31514
35516
40018
45020
50022
56024
63026 28
71030 32
80036
900 CG3100
HDPEDR7 – DR17
CG3300 DR7 – DR17CG3500 DR7 – DR17
VICTAULIC.COM PL2016-GENERAL-C7-6
Products for Plain End HDPE Plastic PipeSE
CTI
ON
7
PR
OD
UC
TS F
OR
PLA
IN E
ND
HD
PE
PLA
STI
C P
IPE
SECTION 8 – Copper Connection Products
Copper Products
8-1VICTAULIC.COM PL2016-GENERAL-C
Style 607 QuickVic™ Rigid Coupling for Copper
The Copper Connection Grooved Piping System
QuickVic™ Rigid Coupling for Copper
STYLE 607Refer to publication 22.13
STYLE 607 – GRADE “EHP” GASkET
PIPE Inches
Approximate Weight Each
COUPLING COMPLETE
With “EHP” Gasket SPARE PARTS
Nominal Size Lbs Price Each“EHP” Gasket
2 1.9 $119.50 $86.002Z\x 2.1 135.00 86.50
3 3.0 145.00 96.004 3.3 186.00 142.505 5.5 304.50 193.006 5.8 406.50 251.508 7.7 649.00 345.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 670 Installation-Ready 90° Elbow
Installation-Ready™ Fitting for Grooved Copper Tube
NO. 670Refer to publication 22.15
No. 670
NSTALLATION-READY™ FITTING FOR COPPER – 90° ELBOW
PIPE
Apprx. Wgt. Ea.
FITTING COMPLETE † With Grade
“EHP” or “T” Gasket SPARE PARTS
Inches
Lbs. Price Each
Plated Bolt & NutGrade EHP
or "T" GasketNom. Size
Outside Dia. No.
Size Inches Price Each
2 2.125 3.6 $440.00 3 C\, x 2 $86.00
2Z\x 2.625 4.7 486.50 3 C\, x 2 86.50
3 3.125 10.7 601.50 3 Z\x x 3 96.00
4 4.125 14.5 1044.50 3 Z\x x 3 142.50
† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing.
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 610 90° Elbow, No. 611 45° Elbow
Copper Connection FittingsRefer to publication 22.04
No. 610 No. 611
COPPER FITTINGS – 90° ELBOW OR 45° ELBOW
Nominal Size
90° ELBOW No. 610
45° ELBOW No. 611
Inches
Aprx. Weight Each
Lbs Price Each
Aprx. Weight Each
Lbs Price Each2 0.9 $226.00 0.8 $197.50
2Z\x 1.3 244.50 1.1 215.003 4.1 346.00 1.6 292.504 6.7 732.00 3.4 669.005 15.0 2682.50 10.0 2348.506 20.0 4298.00 13.0 3641.008 26.0 6255.50 15.6 4585.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C8-2
Copper Connection for Grooved Copper TubingSE
CTI
ON
8
CO
PPER
CO
NN
ECTI
ON
FO
R G
RO
OVE
D C
OP
PER
TU
BIN
G
No. 620 Tee, No. 660 Cap
Copper Connection FittingsRefer to publication 22.04
No. 620 No. 660
COPPER FITTINGS – TEE OR CAP
Nominal Size
TEE No. 620
CAP No. 660
Inches
Aprx. Weight Each
Lbs Price Each
Aprx. Weight Each
Lbs Price Each2 1.1 $379.00 1.2 $187.50
2Z\x 1.8 400.00 1.4 209.003 3.2 603.00 1.4 276.004 6.1 1323.50 2.4 438.005 18.5 4498.00 3.5 1966.006 25.5 4918.00 4.2 3740.008 45.0 8310.50 – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Reducers –No. 650 Concentric Reducer Groove x Groove
Copper Connection Concentric Reducer
NO. 650Refer to publication 22.04
E to E
NO. 650 GROOVED X GROOVE
Nominal SizeAprx.
Weight Each End to End No. 650 Grooved x GroovedInches Lbs Inches Price Each
2Z\x x 2 1.00 3.13 $333.503 x 2 0.95 3.38 333.50
2Z\x 1.03 3.13 333.504 x 2 1.65 3.88 645.00
2Z\x 1.95 3.63 645.003 2.02 3.38 645.00
5 x 3 6.30 3.88 1695.504 6.30 3.38 1695.50
6 x 3 6.40 4.38 2233.504 6.50 3.88 2233.505 6.70 3.38 2233.50
8 x 6 10.00 5.00 3083.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 652 Concentric Reducer Groove x Cup
Copper Connection Concentric Reducer
NO. 652Refer to publication 22.04
E to ECup
NO. 652 GROOVED X CUP
Nominal SizeAprx.
Weight Each End to End CupNo. 652 Grooved
x CupInches Lbs Inches Inches Price Each
2 x 1 0.50 2.70 0.91 $248.501Z\v 0.45 3.00 0.97 248.501Z\x 0.45 2.94 1.09 248.50
2Z\x x 1 0.78 3.25 0.91 301.001Z\v 0.60 3.52 0.97 301.001Z\x 0.65 3.45 1.09 301.00
2 0.65 3.30 1.34 301.003 x 1Z\x 1.06 3.68 1.09 374.50
2 0.99 4.10 1.34 374.504 x 2 1.95 4.75 1.34 725.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
8-3
Copper Connection for Grooved Copper TubingSEC
TION
8
CO
PPER
CO
NN
ECTIO
N FO
R G
RO
OVED
CO
PPER
TUB
ING
VICTAULIC.COM PL2016-GENERAL-C
No. 625 Reducing Tee Groove x Groove
Copper Connection Reducing Tee
NO. 625Refer to publication 22.04
NO. 625 GROOVED X GROOVED
Nominal SizeAprx.
Weight Each No.625 Grooved x GroovedInches Lbs Price Each
2Z\x x 2 1.58 $619.003 x 2 2.14 694.50
2Z\x 2.43 662.004 x 2 5.25 1435.50
2Z\x 5.75 1466.003 6.25 1541.00
5 x 3 5.41 4233.504 8.75 4233.50
6 x 2Z\x 6.66 6616.503 8.12 6310.004 9.75 6310.005 11.25 6616.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Dielectric Waterway Transition Fittings
For CTS to IPS Connections. See pages 8-7 through 8-8.
No. 626 Reducing Tee Groove x Cup
Copper Connection Reducing Tee
NO. 626Refer to publication 22.04
C to E
Cup
CtoB
NO. 626 GROOVED X CUP
Nominal Size Weight Each No. 626 Grooved x Grooved x CupInches Lbs Price Each
2 x C\v 0.75 $280.501 0.81 280.50
1Z\v 0.85 280.501Z\x 0.87 270.50
2Z\x x C\v 1.00 783.501 1.17 783.50
1Z\v 1.23 783.501Z\x 1.32 783.50
3 x C\v 1.40 823.001 1.45 823.00
1Z\v 1.74 823.001Z\x 1.74 823.00
4 x C\v 2.75 1577.501 2.86 1577.50
1Z\v 3.03 1577.501Z\x 3.16 1443.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C8-4
Copper Connection for Grooved Copper TubingSE
CTI
ON
8
CO
PPER
CO
NN
ECTI
ON
FO
R G
RO
OVE
D C
OP
PER
TU
BIN
G
Style 641 Vic-Flange Adapter
Copper Connection Vic-Flange Adapter
STYLE 641
To connect grooved copper to flanged equipmentRefer to publication 22.03
STYLE 641 – GRADE “E” GASkET
PIPE Inches
VIC-FLANGE ADAPTER COMPLETE †
With Grade “E” Gasket SPARE PARTS
Nominal Size
Outside Diameter
Aprx. Weight Each
LbsPrice Each
PaintedGasket
Price EachVic-Flange Washers
2 2.125 3.8 $623.50 $60.00 $171.002Z\x 2.625 4.7 649.50 60.00 171.00
3 3.125 5.4 695.00 74.00 188.004 4.125 7.7 952.00 98.50 255.505 5.125 9.3 1210.00 181.50 279.506 6.125 10.3 1305.00 186.50 330.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NOTE: See Spare Parts Section for spare part prices.
Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications, for which the Victaulic flange adapter is oth-erwise well suited, do not provide an adequate mating surface. In such cases, it is recommended that a metal flange washer be inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing surface. See Spare Parts Section for flange washer prices.
Typical applications where a Victaulic flange washer should be used are:
1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange. The flange washer is then inserted between the Victaulic flange adapter and the flange gasket.
2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Victaulic flange adapter.
3. When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange adapters and the rubber faced flange.
4. When mating C.I. flanges to IPS flanges: the flange washer is placed between two Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g., a flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Victaulic flange adapter.
5. When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in # 1 above.
Style 622 Copper Mechanical-T Bolted Branch Outlet
8-5
Copper Connection for Grooved Copper TubingSEC
TION
8
CO
PPER
CO
NN
ECTIO
N FO
R G
RO
OVED
CO
PPER
TUB
ING
VICTAULIC.COM PL2016-GENERAL-C
Copper Mechanical-T Bolted Branch Outlet
STYLE 622Refer to publication 22.12
STYLE 622 – GRADE “E” EPDM GASkET
Run x Branch
Approximate Weight Each
COMPLETE MECHANICAL-T With Grade “E” Gasket
Nominal Size Inches Lbs Price Each
2Z\x x C\v 3.1 $650.501 3.2 724.50
1Z\x 4.1 900.003 x C\v 3.4 675.00
1 3.6 724.501Z\x 4.5 902.50
4 x C\v 3.3 704.501 4.0 848.00
1Z\x 5.0 1026.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style 622 Copper Mechanical-T Cross
Copper Mechanical-T Cross
STYLE 622Refer to publication 22.12
The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T outlets are available with either grooved or female threaded outlets. Your choice must be specified on each order.STYLE 622 – GRADE “E” EPDM GASkET
Run x Branch
Approximate Weight Each
COMPLETE MECHANICAL-T Cross With Grade “E” Gasket
Nominal Size Inches Lbs Price Each
2Z\x x C\v 4.2 $973.501 4.4 1085.00
1Z\x 6.2 1344.503 x C\v 4.4 1012.00
1 4.8 1085.001Z\x 6.6 1351.50
4 x C\v 4.5 1054.001 5.4 1270.00
1Z\x 7.4 1539.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C8-6
Copper Connection for Grooved Copper TubingSE
CTI
ON
8
CO
PPER
CO
NN
ECTI
ON
FO
R G
RO
OVE
D C
OP
PER
TU
BIN
G
Series 608N Copper Connection Butterfly Valve
Copper Connection Butterfly Valve
SERIES 608NRefer to publication 22.14
SERIES 608N – BARE VALVE, TWO POSITION DETENT, LEVER OPERATOR, OR GEAR OPERATOR
Copper Size Bare Valve Lever Operator Gear OperatorInches Price Each
2Z\x $1688.50 $2058.50 $3762.003 2267.50 2639.50 4354.004 3267.00 3564.00 5014.506 4702.00 5242.50 7126.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Carbon Steel or Stainless Steel (IPS) to Copper (CTS) Dielectric Transition FittingsStyle 647-GT – Grooved x Threaded
Carbon Steel or Stainless Steel (IPS) to Copper (CTS) Dielectric Transition Fitting
STYLE 647-GTRefer to publication 22.21
Grooved x Threaded
STYLE 647-GT – GROOVED X THREADED
PIPE Inches End to End Price
Number of Pieces
Aprx. Wgt. Each
Nominal SizeOutside Diameter Inches Per Unit Per Box Lbs
1 1.315 4.10 $132.00 25 0.71Z\v 1.660 4.10 175.50 10 1.0
1Z\x 1.900 4.10 203.50 10 1.12 2.375 4.10 209.00 10 1.5
2Z\x 2.875 6.10 284.00 6 3.33 3.500 6.10 510.00 6 4.34 4.500 6.10 681.50 6 6.2
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style 647-TT – Threaded x Threaded
STYLE 647-TTRefer to publication 22.21
Threaded x Threaded
STYLE 647-TT – THREADED X THREADED
PIPE Inches End to End Price
Number of Pieces
Aprx. Wgt. Each
Nominal SizeOutside Diameter Inches Per Unit Per Box Lbs
Z\x 0.840 3.00 $67.00 25 0.2
C\v 1.050 3.00 67.00 25 0.31 1.315 4.00 105.00 25 0.6
1Z\v 1.660 4.00 150.00 10 0.8
1Z\x 1.900 4.00 184.50 10 0.92 2.375 4.00 209.00 10 1.2
2Z\x 2.875 6.00 284.00 6 2.93 3.500 6.00 510.00 6 3.74 4.500 6.00 681.50 6 5.3
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
8-7
Copper Connection for Grooved Copper TubingSEC
TION
8
CO
PPER
CO
NN
ECTIO
N FO
R G
RO
OVED
CO
PPER
TUB
ING
VICTAULIC.COM PL2016-GENERAL-C
Style 647-GG Grooved x Grooved
STYLE 647-GGRefer to publication 22.21
Grooved x Grooved
STYLE 647-GG – GROOVED X GROOVED
PIPE Inches End to End
Aprx. Wgt. Each Price
Number of Pieces
Nominal Size
Outside Diameter
Inches Lbs Per Unit per Box
Carbon Steel/Stainless
Steel (IPS) Copper (CTS)2 2.375 2.125 4.19 1.3 $320.00 10
2Z\x 2.875 2.625 6.19 3.0 379.00 63 3.500 3.125 6.19 3.9 625.00 64 4.500 4.125 6.19 5.6 1145.50 6
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C8-8
Copper Connection for Grooved Copper TubingSE
CTI
ON
8
CO
PPER
CO
NN
ECTI
ON
FO
R G
RO
OVE
D C
OP
PER
TU
BIN
G
SECTION 9 – Aluminum Products
Aluminum Products
9-1VICTAULIC.COM PL2016-GENERAL-C
Style 77A Aluminum Coupling, Style 78A Aluminum Snap-Joint Coupling
Products for Grooved Aluminum Pipe
Aluminum Coupling
STYLES 77A AND 78A
Style 77A Refer to publication 21.01.
Style 78A Refer to publication 21.02.
STYLE 77A WITH GRADE “E” OR “T” GASkET
PIPE Inches
Aprx. Wgt. Ea.
COUPLING COMPLETE †
Grade “E” or “T” Gasket
SPARE PARTS
Nominal Size Outside Diameter Lbs Price Each
Plated Bolt & Nut Size
InchesSTYLE 77A
1 1.315 0.8 $141.00 C\, x 2
1Z\x 1.900 1.2 143.50 Z\x x 2Z\x
2 2.375 1.2 240.00 Z\x x 2Z\x
2Z\x 2.875 1.6 276.00 Z\x x 2C\v
3 3.500 1.8 453.50 Z\x x 2C\v
4 4.500 3.8 634.00 B\, x 3Z\v
5 5.563 5.3 953.00 C\v x 4Z\v
6 6.625 5.7 954.00 C\v x 4Z\v
8 8.625 9.6 1273.50 M\, x 512 12.000 17.5 1924.50 1 x 6Z\x
STYLE 78A2 2.375 1.2 $262.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Style 77A couplings consist of aluminum (356T6 alloy) housings, Grade “T” or “E” synthetic gasket and plated steel bolts and nuts. Style 78A couplings consist of aluminum (Tenzalloy) housings, Grade “T” or “E” synthetic gasket. Additional gasket com-pounds and coupling sizes priced on application. ALWAYS SPECIFY GASKET GRADE WHEN ORDERING.
NOTE: See Spare Parts Section for spare part prices.
Aluminum Fittings
Aluminum FittingsRefer to publication 21.03
No. 10A No. 11A
ALUMINUM FITTINGS – 90° ELBOW OR 45° ELBOW
Nominal Size90° ELBOW
No.10A45° ELBOW
No.11A
Inches
Aprx. Weight Each
Lbs Price Each
Aprx. Weight Each
Lbs Price Each1 0.2 + 0.2 +
1Z\x 0.5 + 0.4 +2 0.7 + 0.6 +
2Z\x 1.0 + 0.7 +3 1.7 + 1.2 +4 2.6 + 2.0 +5 5.2 + 4.7 (sw) +6 6.5 + 6.5 +8 15.2 + 14.0 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Fittings made of aluminum (356T6 alloy). Additional sizes and items priced on application. Other fittings available. Contact Victaulic for price and delivery.
(sw) Segmentally welded.
VICTAULIC.COM PL2016-GENERAL-C9-2
Products for Grooved Aluminum PipeSE
CTI
ON
9
PR
OD
UC
TS F
OR
GR
OO
VED
ALU
MIN
IUM
PIP
E
No. 20A No. 60A
ALUMINUM FITTINGS – TEE OR CAP
Nominal SizeTEE
No. 20ACAP
No. 60A
Inches
Aprx. Weight Each
Lbs Price Each
Aprx. Weight Each
Lbs Price Each1 0.4 + 0.1 +
1Z\x 0.7 + 0.2 +2 1.0 + 0.3 +
2Z\x 1.5 + 0.3 +3 2.5 + 0.5 +4 4.6 + 1.0 +5 8.0 + 2.1 +6 9.1 + 3.0 +8 18.4 + 6.0 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Fittings made of aluminum (356T6 alloy). Additional sizes and items priced on application. Other fittings available. Contact Victaulic for price and delivery.
9-3
Products for Grooved Aluminum PipeSEC
TION
9
PR
OD
UC
TS FO
R G
RO
OVED
ALU
MIN
IUM
PIPE
VICTAULIC.COM PL2016-GENERAL-C
SECTION 10 – Large Diameter AGS Vic-Ring Products
Large Diameter AGS Vic-Ring Products
10-1VICTAULIC.COM PL2016-GENERAL-C
Large Diameter Piping Solutions
Large Diameter Piping Products
Bolted Split-Sleeve Couplings
• Provides a reliable, economical alternative to traditional bolted sleeve-type couplings.
• Available in a variety of styles to meet specific application requirements, including:
• Bolted Split-Sleeve Flexible Coupling Unrestrained, flexible bottle-tight joints (E x E)
• Bolted Split-Sleeve Restrained Flexible Coupling Fully restrained pipe joints without external harnessing (F x F)
• Bolted Split-Sleeve Expansion Couplings Pipe joints that provide for thermal expansion and contraction (F x E)
• D-O-L couplings meet or exceed the design, material and performance standards set forth in AWWA C-219.
Master Series Fluid/AirMaster
• Designed to provide fully restrained joints for air and fluid-conveying pipelines.
• Shouldered couplings that are designed to operate at design pressures of the system.
• Meet or exceed the performance standards set forth in AWWA C-606.
Expansion Joint • Complete line of expansion joints.
• Offers solutions for accommodating thermal expansion and contraction of pipelines.
• Products include:
• OmniFlex Stainless Steel Bellows-Type Expansion Joints (can also accommodate lateral movement)
• D-O-L Bolted Split-Sleeve Expansion Coupling (accommodates expansion/contraction up to 6Z\x”)
• Paragon Expansion Joints Fabricated Mechanical Expansion Joints
For more information on the above products, contact your local sales representative or call 905/884-7444
Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings
VICTAULIC.COM PL2016-GENERAL-C10-2
Large Diameter Piping ProductsSE
CTI
ON
10
LA
RG
E D
IAM
ETE
R P
IPIN
G P
RO
DU
CTS
Send US, Asia, and Europe inquiries to: [email protected] or fax to: 610-923-3010To speak with a Customer Service representative in the US, please call 1-800-PICK-VICIn Canada, please e-mail [email protected] or fax 905-884-7446
The joining of pipe with a suitable Victaulic Vic-Ring coupling presents individual considerations that require review by a Victaulic Piping System expert who is experienced in special pipe joining applications. For more information please contact Victaulic, or refer to Victaulic Company’s Vic-Ring submittals available at www.victaulic.com.TO OBTAIN A QUOTE, PLEASE PROVIDE THE INFORMATION REQUESTED BELOW.
CUSTOMER INFORMATION:
APPLICATION DATA:
CONFIGURATION INFORMATION:
Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings
DISTRIBUTOR: DISTRIBUTOR CONTACT NAME:
DISTRIBUTOR PHONE/FAX:
PHONE: FAX:
PHONE: FAX:
DISTRIBUTOR E-MAIL:
CONTRACTOR: CONTRACTOR CONTACT NAME:
CONTRACTOR PHONE/FAX: CONTRACTOR E-MAIL:
PROJECT NAME: PROJECT LOCATION:
PROJECT BID DATE:
NOMINAL PIPE SIZE: ACTUAL PIPE OD: WALL THICKNESS:
PIPE MATERIAL:
Carbon Steel: Grade __________ Schedule __________ Class __________
System Working Pressure (psi): __________ Test/Proof Pressure (psi): __________
Temperature (Deg. F): __________ Media/Service: ____________________________
Ductile Iron:
COUPLING: STYLE:
RINGS: SIZE (= PIPE O.D.): QTY: (per Joint – pipe to pipe connections require two rings)
LINING OPTION:
UNLINED
ABRASION AND CORROSION
ABRASION
RUBBER LINED FLUSHFLUSH OVERHUNG
6287 Rev.A
RUBBER LINED – FLUSH
RUBBER LINED WITHPROTECTIVE BUMPER – FLUSH
RUBBER LINED OVERHUNG
RUBBER LINED – OVERHUNG
RUBBER LINED WITH PROTECTIVEBUMPER – OVERHUNG
CHROMIUM CARBIDE OVERLAY (CCO)
Pressure __________ Class __________
Stainless Steel - Type: Schedule __________
10-3
Large Diameter Piping ProductsSEC
TION
10
LAR
GE
DIA
ME
TER PIPIN
G P
RO
DU
CTS
VICTAULIC.COM PL2016-GENERAL-C
Style W07 AGS Rigid Coupling for AGS Vic-Ring System
Vic-Ring Couplings and Adapter Rings
Rigid Coupling For AGS Vic-Ring System
AGS STYLE W07Refer to publication 16.11
14 – 24”
26 – 48”
AGS STYLE W07 – FOR AGS VIC-RING SYSTEM
PIPEAprx.
Wgt. Ea
COUPLING COMPLETE †
With Flush-Seal Grade “E” Gasket
COUPLING COMPLETE †
With Flush-Seal Silicone Grade “T” or
“L” Gasket SPARE PARTS
Inches
Lbs.
Price Each Price EachAGS
Vic-Ring Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. Painted Galv.
Price Each No.
Size § Inches
14 14.000 48.9 $859.00 $1313.00 $1015.50 $1470.50 + 2 1 x 5Z\x
16 16.000 60.8 1249.00 1836.00 1439.50 2028.00 + 2 1 x 5Z\x
18 18.000 71.2 1392.50 2073.50 1782.00 2268.50 + 2 1 x 5Z\x
20 20.000 81.7 1944.50 2765.50 2177.00 2274.00 + 2 1Z\, x 5Z\x
22 22.000 116.0 + + + + + 2 1Z\, x 5Z\x
24 24.000 116.2 2126.50 3219.50 2374.50 3467.00 + 2 1Z\, x 5Z\x
26 26.00 205.0 + + + + + 4 1C\, x 628 28.000 220.0 + + + + + 4 1C\, x 630 30.000 227.0 + + + + + 4 1Z\v x 732 32.000 242.0 + + + + + 4 1Z\v x 734 34.000 255.0 + + + + + 4 1Z\v x 736 36.000 268.0 + + + + + 4 1Z\v x 738 38.000 340.0 + + + + + 4 1Z\x x 740 40.000 340.0 + + + + + 4 1Z\x x 742 42.000 360.0 + + + + + 4 1Z\x x 744 44.000 390.0 + + + + + 4 1Z\x x 746 46.000 415.0 + + + + + 4 1Z\x x 748 48.000 425.0 + + + + + 4 1Z\x x 7
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
VICTAULIC.COM PL2016-GENERAL-C10-4
Large Diameter Piping ProductsSE
CTI
ON
10
LA
RG
E D
IAM
ETE
R P
IPIN
G P
RO
DU
CTS
Style W77 AGS Flexible Coupling for AGS Vic-Ring System
Flexible Coupling for AGS Vic-Ring System
AGS STYLE W77Refer to publication 16.12
14 – 24”
26 – 60”
AGS STYLE W77 – FOR AGS VIC-RING SYSTEM
PIPE
Aprx. Wgt. Ea.
COUPLING COMPLETE †
With Flush-Seal Grade “E” Gasket
COUPLING COMPLETE †
With Flush-Seal Silicone Grade “T” or
“L” Gasket SPARE PARTS
Inches
Lbs
Price Each Price EachAGS
Vic-Ring Plated Bolt & NutNom. Size
Outside Dia. Painted Galv. Painted Galv.
Price Each No.
Size § Inches
14 14.000 47.5 $1007.00 $1470.00 $1163.50 $1699.50 + 2 1 x 5Z\x
16 16.000 57.8 1312.50 1887.50 1503.50 2170.50 + 2 1 x 5Z\x
18 18.000 65.0 1461.50 2106.00 1656.00 2403.00 + 2 1 x 5Z\x
20 20.000 82.3 2042.00 2880.50 2275.50 3253.50 + 2 1Z\, x 5Z\x
22 22.000 107.0 + + + + + 2 1Z\, x 5Z\x
24 24.000 106.8 2232.50 3270.50 2482.50 3678.50 + 2 1Z\, x 5Z\x
26 26.000 205.0 + + + + + 4 1Z\, x 6
28 28.000 220.0 + + + + + 4 1Z\, x 6
30 30.000 227.0 + + + + + 4 1Z\v x 7
32 32.000 242.0 + + + + + 4 1Z\v x 7
34 34.000 255.0 + + + + + 4 1Z\v x 7
36 36.000 268.0 + + + + + 4 1Z\v x 7
38 38.000 340.0 + + + + + 4 1Z\x x 7
40 40.000 340.0 + + + + + 4 1Z\x x 7
42 42.000 360.0 + + + + + 4 1Z\x x 7
44 44.000 390.0 + + + + + 4 1Z\x x 7
46 46.000 415.0 + + + + + 4 1Z\x x 7
48 48.000 425.0 + + + + + 4 1Z\x x 7
54 54.000 648.0 + + + + + 4 1Z\x x 7
56 56.000 676.0 + + + + + 4 1Z\x x 7
60 60.000 720.0 + + + + + 4 1Z\x x 7
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
NOTE: 14 – 72” standard for this size range is the W77 AGS flexible coupling.
10-5
Large Diameter Piping ProductsSEC
TION
10
LAR
GE
DIA
ME
TER PIPIN
G P
RO
DU
CTS
VICTAULIC.COM PL2016-GENERAL-C
SECTION 11 – Pipe Preparation Tools
Pipe Preparation Tools
LEASE PURCHASE AGREEMENT
Some tools manufactured by Victaulic are available through a lease purchase agreement. Contact Victaulic for details.
11-1VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Victaulic® Roll GroovingFor proper selection of grooving rolls for different alloys, please use the following selection guide. Also note all tools are equipped with carbon steel rolls only. All other types of grooving rolls are optional.
Groove Type Color Code AlloyPart Number
IndentificationOGS Black Carbon Steel RAGS Black/Yellow Band Carbon Steel RW
Stainless Steel – OGSBlack Stainless Steel (Standard Wall Only) RSilver Stainless Steel (Light Wall Only) RX
Stainless Steel – AGSBlack/Yellow Band Stainless Steel (Standard Wall Only) RWSilver/Black Band Stainless Steel (Light Wall Only) RWX
ES Black Carbon Steel RZCopper Copper Copper RR
PVC/Aluminum Gold PVC/Aluminum RP
Vic-Easy® Roll Grooving Tools – Field PortableVE12
Vic-Easy Roll Grooving Tools – Field Portable
VE12 VE12 is designed for manual grooving of C\v – 2” steel, stainless steel, aluminum and PVC pipe.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsTool
List PriceVE12 R000012VE0 17/20 $2903.00VE12SS R200012VE0 17/20 2903.00
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material Notes¾ 20
1 25
1¼ 32
1½ 40
2 50
VE12
Steel 5 – 10 5 – 40Stainless 40S
Aluminum 1 5 – 10 5 – 40PVC Plastic 40
VE12SS Lt. Wall SS 5S – 10S
1. 6061-T4 or 6063-T4 Alloy must be used.
VICTAULIC.COM PL2016-GENERAL-C11-2
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE26 S/C/SS/P
VE26 VE26 is designed for manual grooving of 2 – 6” steel, stainless steel, aluminum, PVC, and copper tube.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsTool
List PriceVE26S – Steel, Stainless Steel R100026VE0 22/25 $2903.00VE26C – Copper Tube R200026VE0 22/25 2903.00VE26SS – Lightwall Stainless Steel R700026VE0 22/25 2903.00VE26P – Aluminum and PVC Pipe R750026VE0 22/25 2903.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material Notes2
502½ 60
3 80
4 100
5 125
6 150
VE26SSteel 5 – 40 5 – 10
Stainless 40S OnlyVE26C Copper K, L, M and DWV
VE26AC Australia Copper A, B and D
VE26PAluminum 1 5 – 40 5 – 10PVC Plastic 40
VE26SS Lt. Wall SS 5S – 10S
1. 6061-T4 or 6063-T4 Alloy must be used.
VE26/VE46 Power Drive Kit
VE26/VE46 Power Drive Kit
Power Drive Kit for the updated VE26 and VE46 In-Place Roll Grooving Tools allows for the new and improved VE26/VE46 to alternately groove pipe using stationary power drive.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsTool
List PriceVE26/VE46 Power Drive Kit R075-026-KIT 7/9 $568.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VE46/P
VE46 VE46 is designed for manual grooving of 3Z\x – 6” steel, stainless steel, aluminum and PVC.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsTool
List PriceVE46 – Steel R000046VE0 28/31 $3312.00VE46 – Stainless Steel R000046VE0 28/31 3312.00VE46P – Aluminum and PVC Plastic R200046VE0 28/31 3312.00VE46P – PVC Plastic R200046VE0 28/31 3312.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material Notes3½ 90
4 100
4½ 120
5 125
6 150
VE46SSteel 5 – 40
Stainless 40S Only
VE46PAluminum 1 5 – 40PVC Plastic 40 40 – 80
1. 6061-T4 or 6063-T4 Alloy must be used.
11-3
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE226 B/S/M/C/BSS/MSS/P
VE226 B/S/M/C/BSS/MSS/P †
VE226 is designed for use with a standard C\,” square drive for roll feed with operator supplied ratchet wrench to roll groove C\v – 6” steel, stainless steel, aluminum, PVC and copper tube. Included are feeler gauges and allen wrench for depth stop setting. Built-on mount fits Victaulic VPD752 and Ridgid 300® power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and Ridgid 1822).
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsTool
List Price ^VE226B – C\v – 1Z\x”/20 – 40 mm R2022260FS 27/42 $3258.50VE226S – 1Z\v – 6”/32 – 150 mm R2002260FS 27/42 3258.50VE226M – 2 – 6”/50 – 150 mm R3002260FS 27/42 3258.50VE226C – 2 – 6”/50 – 150 mm R1002260FS 27/42 3258.50VE226BSS – C\v – 1Z\x”/20 – 40 mm R00X2260FS 27/42 3258.50VE226MSS – 2 – 6”/50 – 150 mm RXM02260FS 27/42 3258.50VE226P – 2 – 6”/50 – 150 mm Aluminum and PVC Plastic R6002260FS 27/42 3258.50
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material Notes¾ 20
1 25
1¼ 32
1½ 40
2 50
2½ 60
3 80
3½ 90
4 100
4½ 120
5 125
6 150
VE226SSteel 5 – 40 5 – 10
Stainless 40S Only
VE226B
Steel 5 – 40Stainless 40S Only
Aluminum 1 5 – 40PVC Plastic 40
VE226MSteel 5 – 40 5 – 10
Stainless 40S OnlyVE226C Copper K, L, M and DWV
VE226BSS Lt. Wall SS 5S – 10SVE226MSS Lt. Wall SS 5S – 10S
VE226PAluminum 1 5 – 40 5 – 10PVC Plastic 40
40– 80
40– 80
1. 6061-T4 or 6063-T4 Alloy must be used.
VE226 Power Drive Kit
VE226 Power Drive Kit Kit for connecting a VE226 Roll Grooving Tool to a Ridgid * 700 Power Drive. * Ridgid is a registered trademark of the Ridge Tool Company.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsTool
List PriceVE226 Power Drive Kit † R700-226-KIT 75/115 $4195.00
† Drive unit not included.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C11-4
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Easy Roll Grooving Tools – Field FabricationVE106
Vic-Easy Roll Grooving Tools – Field Fabrication
VE106 Groove-N-Go VE106 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v – 6”/32 – 150 mm pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with 1Z\v – 3”/25 – 80 mm carbon steel roll sets; 4 – 6”/100 – 150 mm carbon steel rolls are installed.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Tool
List PriceVE106 Groove-N-Go 110V R000106110 140/200 $7552.50
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material Notes1¼ 32
1½ 40
2 50
2½ 60
3 80
3½ 90
4 100
5 125
6 150
VE106
Steel 2, 3 5 – 40Stainless 2 40S
Lt. Wall SS 4 5S – 10SCopper 5 K, L, M and DWV
2. Use standard grooving rolls marked with the prefix R.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details.
4. Use grooving rolls marked with the prefix RX.
5. Use grooving rolls marked with the prefix RR.
VE106 GROOVING ROLLS *
Pipe Material Part Number
Pipe Size Range
inches | mm
Purchase List Price
Each Set †
Standard – Carbon Steel and Sch. 40 Stainless
R912106UA6 1Z\v – 6/32 – 150 Upper $301.50R912106L03 1Z\v – 3/32 – 80 Lower 848.00R904106L06 4 – 6/100 – 150 Lower 848.00
Copper RR02106006 2 – 6/50 – 150 1155.00Stainless RX RX12106L06 1Z\v – 6/32 – 150 Lower 959.00
EndSealRZ02106003 1Z\v – 3/32 – 80 1782.00RZ04106006 4 – 6/100 – 150 2006.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
11-5
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE206 Portable Roll Grooving Tool
VE206 Portable Roll Grooving Tool
VE206 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v – 6”/32 – 150 mm pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with standard roll sets for steel 1Z\v” – 6”/32 – 150 mm (4 – 6”/100 – 150 mm rolls are installed).
Tool Model Part NumberTool Weight
LbsTool
List PriceVE206 – 110V with Ridgid* 700 Power Drive R000206MAS 165 $10724.50VE206 – 110V without power drive unit R000206MA1 220 7620.00
* Ridgid is a registered trademark of the Ridge Tool Company.
Other compatible power drive units are available upon request.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material Notes1¼ 32
1½ 40
2 50
2½ 60
3 80
3½ 90
4 100
5 125
6 150
VE206
Steel 2, 3 5 – 40Stainless 2 40S
Lt. Wall SS 4 5S – 10SCopper 5 K, L, M and DWV
2. Use standard grooving rolls marked with the prefix R.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details.
4. Use grooving rolls marked with the prefix RX.
5. Use grooving rolls marked with the prefix RR.
VE206 GROOVING ROLLS *
Pipe Material Part Number
Pipe Size Range
inches | mm
Purchase List Price
Each Set †
Standard – Carbon Steel and Sch. 40 Stainless
R912106UA6 1Z\v – 6/32 – 150 Upper $301.50R912106L03 1Z\v – 3/32 – 80 Lower 848.00R904106L06 4 – 6/100 – 150 Lower 848.00
Copper RR02106006 2 – 6/50 – 150 1155.00Stainless RX RX12106L06 1Z\v – 6/32 – 150 Lower 959.00
EndSealRZ02106003 1Z\v – 3/32 – 80 1782.00RZ04106006 4 – 6/100 – 150 2006.50
§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C11-6
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE272SFS
VE272SFS The VE272SFS portable roll groover mounts easily to the Victaulic VPD752 or Ridgid 300® Power Drive. The VE272SFS is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes are quick and easy. The VE272SFS is also equipped with Victaulic Company’s patented, Enhanced-Tracking grooving rolls. The tool is supplied complete with 2 – 12” roll sets; 8 – 12” rolls are installed.
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Requires a VPD752 or Ridgid 300 power drive.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVE272SFS R000272SFS 184/250 $1603.50 $12584.50^Optional Stabilizer (8 – 12”/200 – 300 mm only) R4002720FS – 386.50 2892.50
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material Notes¾ 20
1 25
1¼ 32
1½ 40
2 50
2½ 60
3 80
3½ 90
4 100
5 125
6 150
8 200
10 250
12 300
VE272SFS
Steel 2, 3 5 – 40 5 – 20Stainless 2 40S .250
Lt. Wall SS 4, 13 5S – 10SAluminum 1 5 – 40 5 – 20PVC Plastic 6, 14 40 40 – 80 40
Copper 5, 13 K, L, M and DWV
1. 6061-T4 or 6063-T4 Alloy must be used.
2. Use standard grooving rolls marked with the prefix R.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details.
4. Use grooving rolls marked with the prefix RX.
5. Use grooving rolls marked with the prefix RR.
6. Use grooving rolls marked with the prefix RP.
13. Use sway brace for 8”/200 mm copper and 8”-12”/200 – 300 mm lightwall stainless steel.
11-7
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE272SFS GROOVING ROLLS *
Pipe Material
Part Number
Pipe Size Range
inches|mmRental
Per Month §
Purchase List Price
Each Set †
Standard
R900268001 C\v/20
$166.50(per set)*
$3222.00R900268002 1 – 1Z\x/25 – 40 2831.50R902272003 2 – 3Z\x/50 – 90 1915.00R904272006 4 – 6/100 – 150 1915.00R908272012 8 – 12/200 – 300 2072.00
OGS-200 Groove Profile
R9S2268003 2 – 3/50 – 80 2121.50R9S4268006 4 – 6/100 – 150 2267.50
CopperRR02272006 2 – 6/50 – 150 2595.50RR08272008 8/200 2855.50
Stainless RX
RX75268001 C\v/20 4629.00RX01268002 1 – 1Z\x/25 – 40 4207.50RX02272003 2 – 3Z\x/50 – 90 2960.50RX04272006 4 – 6/100 – 150 3197.00RX08272012 8 – 12/200 – 300 3197.00
EndSealRZ02272003 2 – 3Z\x/50 – 90 3453.00RZ04272006 4 – 6/100 – 150 3537.00RZ08272012 8 – 12/200 – 300 3668.00
PVC/AluminumRP02272003 2 – 3Z\x/50 – 90 1943.00RP04272L06 4 – 6/100 – 150 +RP08272012 8/200 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
VICTAULIC.COM PL2016-GENERAL-C11-8
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE270FSD
VE270FSD Completely self-contained unit with integral gear motor, safety guards, safety foot switch and power cord/plug. The VE270FSD uses a 110 power source, with a 220V model optional upon request. The tool is supplied complete with 2 – 12” roll sets; 8 – 12” rolls are installed.
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVE270FSD – 110V R000270FSD 340/410 $2696.50 $21180.00^Optional stabilizer (8 – 12”/200 – 300 mm only) R400276FSD – 386.50 2892.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
^ For proper operation, a pipe stand is required. See Accessories for details.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material Notes¾ 20
1 25
1¼ 32
1½ 40
2 50
2½ 60
3 80
3½ 90
4 100
5 125
6 150
8 200
10 250
12 300
VE270FSD/VE271FSD
Steel 2, 3 5 – 40 5 – 20Stainless 2 40S .250
Lt. Wall SS 4, 13 5S – 10SAluminum 1 5 – 40 5 – 20PVC Plastic 6, 14 40 40 – 80 40
Copper 5, 13 K, L, M and DWV
1. 6061-T4 or 6063-T4 Alloy must be used.
2. Use standard grooving rolls marked with the prefix R.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details.
4. Use grooving rolls marked with the prefix RX.
5. Use grooving rolls marked with the prefix RR.
6. Use grooving rolls marked with the prefix RP.
13. Use sway brace for 8”/200 mm copper and 8”-12”/200 – 300 mm lightwall stainless steel.
11-9
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE270FSD GROOVING ROLLS *
Pipe Material
Part Number
Pipe Size Range
inches | mmRental
Per Month §
Purchase List Price
Each Set †
Standard
R900268001 C\v/20
$166.50(per set)*
$3222.00R900268002 1 – 1Z\x/25 – 40 2831.50R902272003 2 – 3Z\x/50 – 90 1915.00R904272006 4 – 6/100 – 150 1915.00R908272012 8 – 12/200 – 300 2072.00
CopperRR02272006 2 – 6/50 – 150 2595.50RR08272008 8/200 2855.50
Stainless RX
RX75268001 C\v/20 4629.00RX01268002 1 – 1Z\x/25 – 40 4207.50RX02272003 2 – 3Z\x/50 – 90 2960.50RX04272006 4 – 6/100 – 150 3197.00RX08272012 8 – 12/200 – 300 3197.00
EndSealRZ02272003 2 – 3Z\x50 – 90 3453.00RZ04272006 4 – 6/100 – 150 3537.00RZ08272012 8 – 12/200 – 300 3668.00
PVC/AluminumRP02272003 2 – 3Z\x/50 – 90 1943.00RP04272L06 4 – 6/100 – 150 +RP08272012 8/200 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
VICTAULIC.COM PL2016-GENERAL-C11-10
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE416FS
VE416FS VE416FS is provided with a mounting stand for field or shop assembly and set up. The stand and tool must be mounted to a VPD752 or Ridgid 300® 38 rpm power drive before grooving. VE416FS is supplied complete with 2 – 16” roll sets* (8 – 12” rolls are installed, unless otherwise specified). It is equipped with a pipe stabilizer for 6 – 16” nominal pipe sizes to prevent pipe sway.
VE416FS is designed for occasional field grooving of AGS pipe.
2 – 12” Original Groove Rolls and 14 – 16” AGS Groove Rolls
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVE416FS R0004160FS 240/400 $3721.00 $30524.00^
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
^ For proper operation, a pipe stand is required. See Accessories for details.
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and aluminum pipe, and type K, L, M and DWV copper tubing.
Tool Ratings — Maximum Pipe Size Capacity
Pipe Size (in | mm) / Schedule
OGS AGS
Model Pipe Material Notes2
502½ 60
3 80
4 100
5 125
6 150
8 200
10 250
12 300
14 350
16 400
VE416FS
Steel 2, 3 5 – 40 10 – STD STD Wall AGSStainless 2 40S STD STD Wall RW AGS
Lt. Wall SS 4 5S – 10S 10S RWXAluminum 1, 6 5 – 40 5 – STDPVC Plastic 6 40 40 – 80 40
Copper 5 K, L, M and DWV
1. 6061-T4 or 6063-T4 Alloy must be used.
2. Use standard grooving rolls marked with the prefix R.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details.
4. Use grooving rolls marked with the prefix RX.
5. Use grooving rolls marked with the prefix RR.
6. Use grooving rolls marked with the prefix RP.
11-11
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE416FS GROOVING ROLLS *
Pipe Material
Part Number
Pipe Size Range
inches | mmRental
Per Month §
Purchase List Price
Each Set †
StandardR902414003 2 – 3Z\x/50 – 90
$166.50(per set)*
$3440.50R904416006 4 – 6/100 – 150 2569.50R908416012 8 – 12/200 – 300 2569.50
AGS Standard RW RW01416016 14 – 16/350 – 400 3456.50
CopperRR02414006 2 – 6/50 – 150 4744.50RR08416008 8/200 4054.00
EndsealRZ02414003 2 – 3Z\x/50 – 90 4054.00RZ04416006 4 – 6/100 – 150 2853.00RZ08416012 8 – 12/200 – 300 4054.00
Lt. Wall Stainless Steel RX
RX02414003 2 – 3Z\x/50 – 90 3629.50RX04416006 4 – 6/100 – 150 3629.50RX08416012 8 – 12/200 – 300 3629.50
Lt. Wall Stainless Steel RWX AGS
RWX1416016 14 – 16/350 – 400 4592.50
PVC/AluminumRP02414003 2 – 3Z\x/50 – 90 3629.50RP04416006 4 – 6/100 – 150 3629.50RP08416012 8/200 3629.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
VICTAULIC.COM PL2016-GENERAL-C11-12
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE416FSD/417FSD
VE416FSD/417FSD VE416FSD/417FSD tools are completely self-contained units with integral gear motor, safety foot switch and power cord/plug. VE416FSD uses 110V power, while the VE417FSD has a 220V power source. VE416FSD/VE417FSD is supplied complete with 2 – 16” roll sets * (8 – 12” rolls are installed). It is equipped with a pipe stabilizer for 6 – 16” nominal pipe sizes to prevent pipe sway.
VE416FSD is designed for occasional field grooving of AGS pipe.
2 – 12” Original Groove Rolls and 14 – 16” AGS Groove Rolls
* For additional standard rolls and special rolls, see next page.
Tool Model Part Number
Tool Weigth/ Shipping Weight
LbsRental
Per MonthTool
List PriceVE416FSD – 110V R000417FSD 340/450 $4207.00 $39122.00^
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
^ For proper operation, a pipe stand is required. See Accessories for details.
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and aluminum pipe, and type K, L, M and DWV copper tubing.
Tool Ratings — Maximum Pipe Size Capacity
Pipe Size (in | mm) / Schedule
OGS AGS
Model Pipe Material Notes2
502½ 60
3 80
4 100
5 125
6 150
8 200
10 250
12 300
14 350
16 400
VE416FSD/ VE417FSD
Steel 2, 3 5 – 40 10 – STD STD Wall AGSStainless 2 40S STD STD Wall RW AGS
Lt. Wall SS 4 5S – 10S 10S RWXAluminum 1, 6 5 – 40 5 – STDPVC Plastic 6 40 40 – 80 40
Copper 5 K, L, M and DWV
1. 6061-T4 or 6063-T4 Alloy must be used.
2. Use standard grooving rolls marked with the prefix R.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details.
4. Use grooving rolls marked with the prefix RX.
5. Use grooving rolls marked with the prefix RR.
6. Use grooving rolls marked with the prefix RP.
11-13
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE416FSD/VE417FSD GROOVING ROLLS *
Pipe Material
Part Number
Pipe Size Range
Inches | mmRental
Per Month §
Purchase List Price
Each Set †
StandardR902414003 2 – 3Z\x/50 – 90
$166.50(per set)*
$3440.50R904416006 4 – 6/100 – 150 2569.50R908416012 8 – 12/200 – 300 2569.50
OGS-200 Groove Profile
R9S4416006 4 – 6/100 – 150 1762.50
AGS Standard RW RW01416016 14 – 16 3456.50
CopperRR02414006 2 – 6/50 – 150 4744.50RR08416008 8/200 4054.00
EndsealRZ02414003 2 – 3Z\x/50 – 90 4054.00RZ04416006 4 – 6/100 – 150 2853.00RZ08416012 8 – 12/200 – 300 4054.00
Lt. Wall Stainless Steel RX
RX02414003 2 – 3Z\x/50 – 90 3629.50RX04416006 4 – 6/100 – 150 3629.50RX08416012 8 – 12/200 – 300 3629.50
Lt. Wall Stainless Steel RWX
RWX1416016 14 – 16/350 - 400 4592.50
PVC/AluminumRP02414003 2 – 3Z\x/50 – 90 3629.50RP04416006 4 – 6/100 – 150 3629.50RP08416012 8/200 3629.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
VICTAULIC.COM PL2016-GENERAL-C11-14
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE450FSD
VE450FSD VE450FSD is a self-contained unit with two 220 volt, single phase 50/60 hz, 20 amp integral gear motors to handle heavier loads, safety foot switch and power cord/plug. VE450FSD is supplied complete with 4 – 12”/100 – 300 mm original groove roll sets and 14 – 24”/350 – 600 mm AGS groove roll sets.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVE450FSD R000450FSD 825 $4288.50 $60361.00VE450FSD with VAPS 224 Pipe Stand (Save 10%)
R000450FSD & R000224PSO 825 4872.50 62433.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Optional Rolls: Optional rolls are available for 4 – 18”/100 – 450 mm lightwall stainless steel origi-nal groove; 14 – 24”/350 – 600 mm lightwall stainless steel AGS groove; and 4 – 12”/100 – 300 mm EndSeal (ES) groove. RP roll sets are also available for roll grooving aluminum and plastic.
Note: Tool not available for rent. For Lease Purchase Pricing contact Victaulic.
Tool Ratings — Maximum Pipe Size Capacity
Pipe Size (in | mm) / Schedule
OGS AGS
ModelPipe
Material Notes4
1005
1256
1508
20010
25012
30014
35016
40018
45014
35016
40018
45020
50022
55024
600
VE450FSD
Steel 3, 7 5 – 40 5 – STD 5 – STD
Stainless 8 40S STD STDLt. Wall SS 9 5S – 10S 10S RWXAluminum 1, 6 5 – 40 STDPVC Plastic 6 40 – 80 40
1. 6061-T4 or 6063-T4 Alloy must be used.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details.
6. Use grooving rolls marked with the prefix RP.
7. Use standard grooving rolls marked with the prefix R for both OGS and AGS.
8. Use standard grooving rolls marked with the prefix R for OGS and RW for AGS.
9. Use grooving rolls marked with the prefix RX for OGS and RWX for AGS. (Special RWX Rolls are available for grooving true Sch. 10 (0.250 | 6.4 mm).
VE450FSD GROOVING ROLLS *
Pipe Material
Part Number
Pipe Size Range
inches | mmRental
Per Month §
Purchase List Price
Each Set †
Standard R9Q1448006 4 – 6/100 – 150
$166.50
(per set)*
$4534.50R9Q1448012 8 – 12/200 – 300 5880.50
AGS Standard RW RWQ2448024 14 – 24/350 – 600 5909.00
Lt. Wall Stainless Steel RX
RXQ1448006 4 – 6/100 – 150 10644.00RXQ1448012 8 – 12/200 – 300 8618.50RXQ1448016 14 – 16/350 – 400 8589.50RXQ1448020 18/450 8723.00
Lt. Wall Stainless Steel RWX AGS RWQX448024 14 – 24/350 – 600 11762.00
PVC/AluminumRPQ1448006 4 – 6/100 – 150 +RPQ1448012 8/200 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
11-15
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Easy Roll Grooving Tools – Shop FabricationVE268
Vic-Easy Roll Grooving Tools – Shop Fabrication
VE268 † NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase power requires tool to be hard wired by a local certified electrician.
Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is equipped with a pipe stabilizer for 8 – 12” nominal pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (2 – 12” pipe) * (8 – 12” rolls are installed, unless otherwise speci-fied).
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Request RP-268 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require different incoming power requirements. (If your service is 208 volts, a “Boost & Buck Transformer” may be required.)
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVE268 – 220V R000268VE0 735/766 $3526.50 $40224.00^
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
^ For proper operation, a pipe stand is required. See Accessories for details.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material Notes¾ 20
1 25
1¼ 32
1½ 40
2 50
2½ 60
3 80
3½ 90
4 100
5 125
6 150
8 200
10 250
12 300
VE268
Steel 2, 3 5 – 40 5 – 20Stainless 2 40S
Lt. Wall SS 4 5S – 10SAluminum 1, 6 5 – 40 5 – 20PVC Plastic 6, 14 40 40 – 80 40
Copper 5 K, L, M and DWV
1. 6061-T4 or 6063-T4 Alloy must be used.
2. Use standard grooving rolls marked with the prefix R.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details.
4. Use grooving rolls marked with the prefix RX.
5. Use grooving rolls marked with the prefix RR.
6. Use grooving rolls marked with the prefix RP.
VICTAULIC.COM PL2016-GENERAL-C11-16
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE268 GROOVING ROLLS *
Pipe Material
Part Number
Pipe Size Range
inches | mmRental
Per Month §
Purchase List Price
Each Set †
Standard
R900268001 C\v/20
$166.50(per set)*
$3222.00R900268002 1 – 1Z\x/25 – 40 2831.50R902272003 2 – 3Z\x/50 – 80 1915.00R904272006 4 – 6/100 – 150 1915.00R908272012 8 – 12/200 – 300 2072.00
CopperRR02272006 2 – 6/50 – 150 2595.50RR08272008 8/200 2855.50
EndsealRZ02272003 2 – 3Z\x/50 – 90 3453.00RZ04272006 4 – 6/100 – 150 3537.00RZ08272012 8 – 12/200 – 300 3668.00
Stainless RX
RX75268001 C\v/20 4629.00RX01268002 1 – 1Z\x/25 – 40 4207.50RX02272003 2 – 3Z\x/50 – 80 2960.50RX04272006 4 – 6/100 – 150 3197.00RX08272012 8 – 12/200 – 300 3197.00
PVC/AluminumRP02272003 2 – 3Z\x/5- – 90 1943.00RP04272L06 4 – 6/100 – 150 +RP08272012 8/200 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
11-17
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE414MC
VE414MC † NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase power requires tool to be hard wired by a local certified electrician.
Fully-motorized, semi-automatic, hydraulic tool is shipped fully assembled with rolls for standard groov-ing (2 – 16” pipe *). Requires 220/440V, 3 phase, 60 Hz power supply. Safety guard, safety foot switch and instructions are included. Pipe stabilizer for pipe 8” and larger is included, to prevent pipe sway.
2 – 12” Original Groove Rolls
14 – 16” AGS Groove Rolls
NOTE: New tools supplied with AGS rolls when 14 – 16” roll sets are specified.
Request RP-414MC for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require different incoming power requirements. (If your service is 208 volts, a “Boost & Buck Transformer” may be required.)
* For additional standard rolls and special rolls, see next page.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVE414MC 220V R000414MC1 735/830 $4796.50 $62346.00^
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
^ For proper operation, a pipe stand is required. See Accessories for details.
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and alumi-num pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 – 16”/350 – 400 mm std. wall car-bon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with the original groove rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered separately. Contact Victaulic for pricing and availability.
For product applications requiring the original groove roll sets, please contact Victaulic for ordering infor-mation.
VICTAULIC.COM PL2016-GENERAL-C11-18
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Tool Ratings — Maximum Pipe Size Capacity
Pipe Size (in | mm) / Schedule
OGS AGS
Model Pipe Material Notes2
502½ 60
3 80
4 100
5 125
6 150
8 200
10 250
12 300
14 350
16 400
VE414MC
Steel 3, 7 5 – 40 10 – STD STD Wall AGSStainless 8 40S STD Wall RW AGS
Lt. Wall SS 9 5S – 10S 10S RWXAluminum 1, 6 5 – 40 5 – STDPVC Plastic 6 40 40 – 80 40
Copper 5 K, L, M and DWV
1. 6061-T4 or 6063-T4 Alloy must be used.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details.
5. Use grooving rolls marked with the prefix RR.
6. Use grooving rolls marked with the prefix RP.
7. Use standard grooving rolls marked with the prefix R for both OGS and AGS.
8. Use standard grooving rolls marked with the prefix R for OGS and RW for AGS.
9. Use grooving rolls marked with the prefix RX for OGS and RWX for AGS. (Special RWX Rolls are available for grooving true Sch. 10 (0.250 | 6.4 mm).
VE414MC GROOVING ROLLS *
Pipe Material
Part Number
Pipe Size Range
inches | mmRental
Per Month §
Purchase List Price
Each Set †
StandardR902414003 2 – 3Z\x/50 – 90
$166.50(per set)*
$3440.50R904416006 4 – 6/100 – 150 2569.50R908416012 8 – 12/200 – 300 2569.50
AGS Standard RW RW01416016 14 – 16/350 – 400 3456.50
CopperRR02414006 2 – 6/50 – 150 4744.50RR08416008 8/200 4054.00
EndsealRZ02414003 2 – 3Z\x/50 – 90 4054.00RZ04416006 4 – 6/100 – 150 2853.00RZ08416012 8 – 12/200 – 300 4054.00
PVC RP02416003 2 – 3Z\x/50 – 90 3629.50
Lt. Wall Stainless Steel RX
RX02414003 2 – 3Z\x/50 – 90 3629.50RX04416006 4 – 6/50 – 90 3629.50RX08416012 8 – 12/200 – 300 3629.50
Lt. Wall Stainless Steel RWX AGS
RWX1416016 14 – 16/350 – 400 4592.50
PVC/AluminumRP02414003 2 – 3Z\x/50 – 90 3629.50RP04416006 4 – 6/50 – 90 3629.50RP08416012 8/200 3629.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
VE460
11-19
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE460 † NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase power requires tool to be hard wired by a local certified electrician.
Base Tool – Fully-motorized, semi-automatic, hydraulic shop tool is shipped fully assembled with rolls for standard grooving (4 – 24”) .500 wall maximum. 8 – 12” rolls are installed.
4 – 12” Original Groove System Groove Rolls
14 – 24” AGS Groove Rolls
Requires 220/440/3/60 power supply. All tools are shipped 220 as a standard. Operating instructions included.
Request RP-460 for power requirements or visit the Victaulic web site.† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require different incoming power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may be required.)
See kits below for components required to groove above 24”.
Tool ModelPart
Number Roll Sets Included
Railing and Platfrom kit
Quantity
Support Base
(Quantity/Part
Number)
Tool Weight/Shipping Weight
LbsRental
Per Month List PriceRecommended Pipe Stand ^
TOOL ONLY VE460 R000460VE0
4 – 6”/100 – 150 mm (R9Q1460006),
8 – 12”/200 – 300 mm (R9Q1460012),
14 – 24”/350 – 600 mm (RWQ2460024) AGS
N/A N/A 1500/1750 Call $121663.50
VAPS224 (R000224PS0)
OR VAPS1672
(R0001672PS)
Optional kits for Grooving Above 24” ‡
KIT 1 26 – 36”/ 650 – 900
mmLIFTING POINT LIFTING POINT
FRONT
R260460KIT 26 – 36”/650 – 900 mm (RWQ3460038) AGS
1 (R550460KIT)
1 (R551460PNT) N/A Call 16476.00
VAPS236 (R000236PS0)
OR VAPS1672
(R0001672PS)KIT 2
40 – 48”/ 1000 – 1200
mmLIFTING POINT LIFTING POINT
FRONT
R400460KIT 40 – 48”/1000 – 1200 mm (RWQ3460048) AGS
1 * (R550460KIT)
2 ** (R551460PNT) N/A Call 18903.50 VAPS1672
(R0001672PS)
KIT 3 50 – 60”/
1250 – 1500 mm
LIFTING POINT LIFTING POINT
FRONT
LIFTING POINT LIFTING POINT
FRONT
LIFTING POINT LIFTING POINT
FRONT
R500460KIT 50 – 60”/1250 – 1500 mm (RWQ3460060) AGS
1 * (R550460KIT)
3 ** (R551460PNT) N/A Call 22373.50 VAPS1672
(R0001672PS)
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC, and aluminum pipe.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
^ For proper operation, a pipe stand is required. See Accessories for details.
‡ Optional Accessory Kits list REQUIRED COMPONENTS to groove up to the specified size. Kit components can be ordered indi-vidually or as a kit.
* Railing and Platform Kit is required only if preceding kit has not been ordered.
** Only one (1) Support Base is required if preceding kit has been ordered.
VICTAULIC.COM PL2016-GENERAL-C11-20
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Tool Ratings — Maximum Pipe Size Capacity
Pipe Size (in | mm) / Schedule
OGS
Model Pipe Material Notes4
1005
1256
1508
20010
25012
30014
35016
40018
45020
50022
55024
600
VE460
Steel 3, 8 5 – 80 5 – XSStainless 8 40S STD
Lt. Wall SS 9 5S – 10S 5S – 10S, TRUE 10Aluminum 1, 6 5 – 40PVC Plastic 6 40 – 80 40
Tool Ratings — Maximum Pipe Size Capacity
Pipe Size (in | mm) / Schedule
AGS
Model Pipe Material Notes14
35016
40018
45020
50022
55024
60026
65028
70030
750 32
80034
85036
90038
95040
100042
105048
120050
125060
1500
VE460Steel 3, 8 10 – XS .375 – .500
Stainless 8 STDLt. Wall SS 9 5S – 10S, TRUE 10
1. 6061-T4 or 6063-T4 Alloy must be used.
3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details.
6. Use grooving rolls marked with the prefix RP.
8. Use standard grooving rolls marked with the prefix R for OGS and RW for AGS.
9. Use grooving rolls marked with the prefix RX for OGS and RWX for AGS. (Special RWX Rolls are available for grooving true Sch. 10 (0.250 | 6.4 mm).
NOTE: Maximum ratings are limited to pipe that does not exceed the yield strength of API-5L Grade “B”, ASTM Grade “B”, 150 Brinell Hardness Number (BHN) maximum.PIPE PREPARATION TOOLS
VE460 GROOVING ROLLS *
Pipe Material
Part Number
Pipe Size Range
inches | mm
Purchase List Price Each Set
Carbon Steel Standard Wall and Stainless
R9Q1460006 4 – 6/100 – 150 $4727.50R9Q1460012 8 – 12/200 – 300 4562.00RWQ2460024 14 – 24/350 – 600 AGS 4377.50
Lt. Wall Stainless Steel RXRXQ1460006 4 – 6/100 – 150 10204.50RXQ1460012 8 – 12/200 – 300 9045.00
OGS-200 Groove Profile R9QS460008 8/200 5554.00Lt. Wall Stainless Steel RWX AGS
RWQX460018 14 – 18/350 – 450 AGS 9197.50
PVC/AluminumRPQ1460006 4 – 6/100 – 150 10457.00RPQ1460012 8 – 12/200 – 300 9931.00
EndSealRZQ1460006 4 – 6/100 – 150 9259.00RZQ1460012 8 – 12/200 – 300 7801.00
Lt. Wall Stainless Steel RX OGS
RXQ1460016 14 – 16/350 – 400 7032.50RXQ1460020 18/450 10876.50RXQ1460024 22 – 24/550 – 600 9130.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
11-21
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE872
VE872 NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase power requires tool to be hard wired by a local certified electrician.
Base Tool – Fully-motorized, semi-automatic, electrohydraulic tool is shipped complete with safety guards and safety foot switch.
Support bases are required for roll grooving 26”/650 mm and larger pipe sizes. Each support is 16”/400 mm in height and corresponds with a range of allowable pipe sizes it can groove.
Requires 220/440/3/60 power supply. Tool can also be supplied in various voltages. Contact Victaulic for details.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthVE872 R000872VE0 1900/2150 +
^ For proper operation, a pipe stand is required. See Accessories for details.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) † / Schedule
Model Pipe Material Note8
20010
25012
30014
35016
40018
45020
50022
55024
60026
65028
70030
75032
80034
85036
90038
95040
100042
105048
120050
125054
135056
140060
150062
155072
1800
VE872Carbon Steel 11 Sch. 40 .375/9.5 mm to .500/12.7 mm.500
Carbon Steel .562/.625 wall Grade B Only
11. Physical properties shall be in accordance with API specification 5L, Grades B, X42, X46, X52, X56 or X60, download publica-tion 25.09.For physical properties not listed contact Victaulic® for details.
NOTE: Maximum ratings are limited to pipe that does not exceed the yield strength of API-5L Grade “B”, ASTM Grade “B”, 150 Brinell Hardness Number (BHN) maximum.
VICTAULIC.COM PL2016-GENERAL-C11-22
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Victaulic Fabrication Cell
Victaulic Fabrication Cell
Includes hydraulic adjustable pipe stand and tracks, tool support, two adjustable positioner tables, and an assembly table. Also includes caster wheels and ball transfers. Grooving tools are offered with the package, but are not included in the price of the base package.
VICTAULIC FABRICATION CELL
Description Part Number List PriceVictaulic Fabrication Cell without Grooving Tool – Base Package R001131KIT $64289.50
VICTAULIC FABRICATION CELL WITH GROOVING TOOL
Description Part Number List PriceVictaulic Fabrication Cell with VE414MC Roll Grooving Tool R000131414 $126634.00Victaulic Fabrication Cell with VE460 Roll Grooving Tool R000131460 185951.50
VICTAULIC FABRICATION COMPONENTS SOLD SEPARATELY
Description Part Number List PriceVAP131R – Pipe Stand with V Track R101131ASY $18151.50VAP131T – Assembly Table R200131ASY 11578.00VAP131F – Positioner R102131ASY 13081.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
11-23
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Victaulic Fabrication Cell Accessories
Description Part Number List PriceV-Track Wheels NM05000010 $150.00V-Track 6-ft. Sections R400131PNT 574.00Ball Transfers NM28000002 328.00Ball Transfer Support R301131PNT 297.00Friction Slide R208131PNT 68.00Friction Brake R210131ASY 172.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Vic-Easy Tool AccessoriesVAPS112 Pipe Stand
Vic-Easy Tool Accessories
Victaulic Power Drive – VPD752
Power drive features safety foot switch and bi-directional speed chuck. Z\x horsepower, 15 amp motor operates on standard 120V power source.
VPD753 for single phase, 220V power source also available. Contact Victaulic for pricing.
Capacities: See appropriate tool. †
Optional: Universal Drive Shaft.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List Price Victaulic Power Drive – VPD752 – 110V R000752110 140/165 Call $10561.00Victaulic Power Drive – VPD753 – 220V R000753220 140/165 Call 10561.00
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
VAPS112 Vic-Easy Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design allows for rotational and forward/traverse movement. They are designed for direct use with Vic-Easy roll grooving tools: VE272SFS, VE268, VE270FSD.
Capacities: 1 – 12” IPS pipe †
Load Rating: 1075 lbs
Vertical Stroke: 14Z\x” for adjusting rod; 8Z\x” leg adjustment; 23” total
Min. Pipe Height from Floor: 23” on 12” pipe; 21” on 1” pipe
Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List Price VAPS 112 R000112PS0 190/220 $932.50 $7620.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
VICTAULIC.COM PL2016-GENERAL-C11-24
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VAPS224 Pipe Stand
VAPS224 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. They are designed for direct use with Vic-Easy roll grooving tools: VE416/FSD, VE414MC, VE436MC, VE460.
Capacities: 2 – 24” IPS pipe †
Load Rating: 1800 lbs
Vertical Stroke: 21”
Min. Pipe Height from Floor: 14” on 24” IPS pipe
Max. Pipe Height from Floor: 39” on 2” IPS pipe
Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVAPS 224 R000224PS0 260/315 $1086.00 $9965.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
VAPS236 Pipe Stand
VAPS236 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. They are designed for direct use with Vic-Easy roll grooving tools: VE436MC and VE460.
Capacities: 26 – 36” pipe †
Load Rating: 4200 lbs
Vertical Stroke: 18”
Min. Pipe Height from Floor: 12” on 36” pipe
Max. Pipe Height from Floor: 28” on 26” pipe
Tool Model Part Number
Tool Weight/ Shipping Weight Lbs.
Rental Per Month
Tool List Price
VAPS236 R000236PS0 480 Call $51772.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
11-25
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VAPS1672 Pipe Stand
VAPS1672 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. They are designed for direct use with Vic-Easy roll grooving tools: VE436MC and VE460.
Capacities: 16 – 72” pipe †
Load Rating: 10000 lbs
Vertical Stroke: 17”
Min. Pipe Height from Floor: 16” on 72” pipe
Max. Pipe Height from Floor: 28” on 16” pipe
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental Per
MonthTool
List PriceVAPS1672 R0001672PS 480 Call $52515.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
VE436MC Slide Conversion Kit
VE436MC Quick Change Slide Conversion KIt
The VE436MC Quick Change Slide Conversion Kit includes an upper shaft and slide held in place by a detent pin for improved efficiency. The kit also includes 4 – 12”/100 – 300 mm standard groove upper rolls, 14 – 24”/350 – 600 mm AGS groove upper rolls, pipe size, pipe rotation, guard setting labels, and guard setting pads (standard and AGS).
NOTE: Upper rolls only are included with the kit. Lower rolls can be purchased separately. Retain original slide, shaft, set screws and roll grooving assembly for future use.
Conversion kit Part Numberkit Weight
Lbskit
List PriceVE436MC Quick Change Slide Conversion Kit R150436KIT 106 $16674.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: The VE436MC tool has a maximum wall thickness range of up to .375”/9.5 mm
VICTAULIC.COM PL2016-GENERAL-C11-26
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Cut Grooving ToolsVG28GD
Cut Grooving ToolsNotice: When ordering a cut grooving tool, please specify standard steel or ductile iron (rigid or flexible).
VG28GD (Gear Drive) *
Includes tool set for grooving 4 – 6” standard steel pipe, crate, operating instructions, tool bit removal kit, 10” extension bar, depth stop adjustment tools, and one extra 2 – 3Z\x” and 8” standard groove steel pipe tool bits.
Capacities: 2 – 8” steel (and other IPS) and 3 – 6” cast and ductile pipe (Additional bits required)
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVG28GD (Gear Drive) R000281AVG 37/56 $1054.50 $18605.00
* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material Note2
502½ 65
3 80
3½ 90
4 100
5 125
6 150
8 200
VG28GD
Steel 15, 16 40 – 80 40Stainless 15 40 – 80
Aluminum 15 40 – 80Ductile Iron 15 Class 53 Min.
15. Special knives and stops may be required.
16. Maximum steel pipe wall thickness up to 0.437”/11.1 mm.
VG28GD PARTS
Type Pipe
Type Groove
Pipe Size/ Tool Bit Marking
inches | mmPart
NumbersPurchase
Price Each
Steel (Aluminum Stainless and other IPS Metallic)
Standard2 – 3Z\x/50 – 90 Std. RK02280003 $363.004 – 6/100 – 150 Std. RK04280006 363.00
8/200 Std. RK08280008 363.00
EndSeal2 – 3Z\x/50 – 90 ES RK02280Z03 363.004 – 6/100 – 150 ES RK04280Z06 363.00
8/200 ES RK08280Z08 363.00
AWWA # Cast and Ductile Iron
Standard (Rigid) 3 – 6/80 – 150 CIR * RK03280G06 518.00Flexible 3 – 6/80 – 150 CIF RK03280E06 462.00
Stainless Steel SS2 – 3Z\x/50 – 90 RK02280S03 363.004 – 6/100 – 150 RK04280S06 363.00
8/200 RK08280S08 363.00
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Requires Special Cast Iron Rigid Pipe Stops (Part No. R-016-280-AVG [2 required]). NOTE: Special urethane covered Idler Roll (Part No. R-033-281-AVG) recommended for grooving glass lined pipe.
11-27
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG28GD-ABR
VG28GD-ABR for lined piping systems
Rubber Lining
Tool Bit Arm
Pipe
Pipe Stop
The standard VG28GD tool can be equipped to provide grooving for abrasion. Parts for cut grooving for abrasive services are found in the parts required for abrasive systems table. For details for abrasion groov-ing please refer to publication 25.03. The VG28GD tool is required for use with VG28GD-ABR spare parts. These parts must be ordered separately for abrasive grooving services.
Capacities: 2 – 8”/50 – 200 mm carbon steel.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model
Pipe Material Note
8 200
10 250
12 300
14 350
16 400
18 450
20 500
22 550
24 600
VG824-ABR Steel 15 40 – XS
15. Special knives and stops may be required.
PARTS REQUIRED FOR ABRASIVE SYSTEMS
Type Pipe Part
Pipe Size/ Tool Bit Marking
inches | mmPart
Number Price Each
SteelKnives/Tool Bit
2 – 3Z\x/50 – 90 RK02280M03 $404.004 – 6/100 – 150 RK04285M06 610.00
8/200 RK08285M08 560.00Stop Spacers † 2 – 8/50 – 200 R001285MCH 562.50
† Two Required
VDG26GD
VDG26GD (Gear Drive)* for double groove systems
Includes tool set for grooving 6” double groove standard carbon steel pipe. Also includes crate, operation instructions, tool bits, tool bit removal kit, 10” extension bar and depth stop adjusting tools.
Capacities: 6” carbon steel
NOTE: For details on grooving the Style 808 Double Groove Coupling, please refer to publication 25.04.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVDG26GD ** R000284AVG 37/56 $2685.00 $21072.00
* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories).
** The VDG26GD is used to prepare pipe ends for Victaulic Style 808 Double Groove Couplings only.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
ModelPipe
Material Note2
502½ 65
3 80
3½ 90
4 100
5 125
6 150
8 200
VDG26GD Steel 15 40 – 8015. Special knives and stops may be required.
VDG26GD PARTS
Type Pipe knife/Bit
Pipe Size/ Tool Bit Marking
inches | mmPart
Number Price Each
Carbon SteelA 6/150 RK04284A06 $608.50B 6/150 RK04284B06 608.50
VICTAULIC.COM PL2016-GENERAL-C11-28
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG824
VG824 * Includes tool set for grooving 8 – 12” standard steel pipe, crate, operating instructions, tool bit removal kit, wrench and one extra 8 – 24” standard groove steel pipe tool bit.
Capacities: 8 – 24” steel (and other IPS) and 8 – 24” cast and ductile pipe (Additional bits required) Note: Tools bits and stops for D.I. are optional. See below.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVG824 R000824AVG 82/126 $2425.00 $31551.00
* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model
Pipe Material Note
8 200
10 250
12 300
14 350
16 400
18 450
20 500
22 550
24 600
VG824
Steel
15
40 – 80 30 – STDStainless 30 – STD
Aluminum 30 – STDDuctile Iron Class 53 Min.
15. Special knives and stops may be required.
VG824 PARTS
Type PipeType
Groove Tool Bit Pipe Stop
Pipe/Size Marking
inches | mmPart
NumbersPurchase
Price Each
Pipe/Size Marking inches |
mmPart
NumbersPurchase
Price Each
Steel (and other IPS Metallic)
Std. 8 – 24/ 200 – 600 Std. RK08824024 $334.50
8 – 12” Std. R424824AVG $891.00
14 – 24” Std. R024824AVG 891.00
EndSeal 8 – 12/ 200 – 300 ES RK08824Z12 386.00 8 – 12”
Std. R424824AVG 891.00
AWWA # Cast and Ductile Iron
Std. (Rigid)
8/200 CIR RK08824G08 468.00 8/200 CI R524824AVG 891.00
10 – 12/ 250 – 300 CIR RK10824G12 468.00
10 – 12/250 – 300 CI
R024824AVG 891.00
14/350 CIR RK14824G14 468.00 14/350 CI R224824AVG 933.50
16 – 24/ 400 – 600 CIR RK16824G24 468.00
16 – 24/400 – 600 CI
R324824AVG 785.50
Flexible
8 – 12/ 200 – 300 CIF RK08824E12 468.00 8/200 CI R524824AVG 891.00
14 – 24/ 250 – 600 CIF RK14824E24 468.00
10 – 12/250 – 300 CI
R024824AVG 891.00
Stainless Steel SS 8 – 24/ 200 – 600 RK08824X24 972.00 – – –
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTE: Special urethane covered Idler Roll (Part No. R-201-824-AVG) recommended for grooving glass lined pipe. Center adjust-able stop (Part. No. R-025-824-AVG) available.
11-29
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG824-A30
VG824-ABR (Abrasion Only) for lined piping systems
Rubber Lining
Pipe
B8-
12 M
RL
8-
24 S
TD
18-2
4 A
BR
AS
.
8 – 12" Tool Bit
14 – 16" Tool Bit
18 – 24" Tool Bit
The standard VG824 tool can be equipped to groove ABR (machined for rubber lining – abrasion only) pipe. Special knives (tool bits), pipe end stop spacers, stop guide and pipe stop screw must be purchased separately. For details for abrasion grooving refer to publication 25.03. Required to convert a VG824 to groove abrasion only machined rubber lined pipe special parts.
The VG824 tool is required for use with VG824-ABR spare parts. These parts must be ordered separately for abrasive grooving services.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model
Pipe Material Note
8 200
10 250
12 300
14 350
16 400
18 450
20 500
22 550
24 600
VG824-ABR Steel 15 40 – XS
15. Special knives and stops may be required.
VG824ABR PARTS
Item # DescriptionPart
Number No. Required Price Each
1 8 – 12”/ 200 – 300 mm Tool Bit RK08825M12 1 Call
2 14 – 16”/ 350 – 400 mm Tool Bit RK08824024 1 $334.50
3 18 – 24”/ 450 – 600 mm Tool Bit RK18825M24 1 305.50
4 8 – 12”/ 200 – 300 mm Spacer † R024825MCH 2 328.00
5 14 – 24”/ 350 – 600 mm Spacer † R025825MCH 2 264.00
6 Stop Guide R026825MCH 1 1905.507 Guide Screw R226824AVG 1 1905.50
† Two Required
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C11-30
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG824DG
VG824DG for double groove systems
Pipe Pipe Stop
Tool Bit Arm
Includes tool set to groove 8 – 12” double groove on carbon steel pipe. Also includes crate, operating instructions, tool bits, tool bit removal kit and depth stop adjusting tools.
Note: The VG824DG tool is used to fabricate pipe for the Victaulic Style 808 Double Groove Coupling. Refer to publication 25.04 for grooving specifications.
Capacities: 8 – 12” carbon steel
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVG824DG R000827AVG 82/126 $6663.00 $52301.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
ModelPipe
Material Note8
20010
25012
30014
35016
40018
45020
50022
55024
600VG824DG Steel 15 40 – 80
15. Special knives and stops may be required.
VG824DG PARTS
DescriptionType
Groove
Pipe Size/ Tool Bit Marking
inches | mmPart
Number Price Each
Knives/Tool Bits Double Groove
8 – 12/ 200 – 300 mm A RK08824024 $334.50
8 – 12/ 200 – 300 mm B RK08824024 334.50
VG824DG PARTS REQUIRED FOR ES GROOVES
DescriptionType
Groove
Pipe Size/ Tool Bit Marking
inches | mmPart
Number Price Per Set of 2
Center Stop Double Groove 8 – 12/ 200 – 300 mm R076827HTR Call
Stops † Double Groove 8 – 12/ 200 – 300 mm R074827HTR Call
† Two Required
11-31
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG828
VG828
Tool Bit Arm
Center StopPipe
Includes tool set for grooving 14”/350mm standard carbon steel pipe, shipping crate, operating instructions, tool bit removal kit, depth adjusting tools and one extra tool bit.
Note: The VG828 tool has been designed for cut grooving .500”/12.7 mm or heavier carbon steel pipe 14 – 24”/350 – 600 mm. Designed for AGS systems only.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVG828 R000828AVG 82/126 $4833.50 $37941.00
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
ModelPipe
Material Note14
35016
40018
45020
50022
55024
600VG828 Steel 15 .500-.750
15. Special knives and stops may be required.
VG828 PARTS
Type PipeType
Groove
Tool Bit/knife Pipe StopPipe/Size Marking inches |
mmPart
NumberPurchase
Price Each
Pipe/Size Marking
inches | mmPart
Number
Purchase Price Each
Steel AGS 14 – 24/ 350 – 600 RK14828W24 $894.00
14 – 24/ 350 – 600
Front †R024824AVG $891.00
Steel AGS – – –8 – 24/
200 – 600 Center
R025824AVG 1813.50
† Two Required
VICTAULIC.COM PL2016-GENERAL-C11-32
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG412
VG412 Orbital Grooving Tool
Includes riser blocks and grooving heads for cut grooving 4 – 12” ductile iron rigid groove. Power drive supplied requires 120 volt, 11.5 amp electrical supply. Stand included at no extra charge.
Capacities: 4 – 12” ductile iron pipe
NOTE: Specifically designed for field closure pieces. Not suitable for production grooving.
Note: Tools bits and stops for D.I. are optional. See below.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per Month List PriceVG412 Orbital Grooving Tool R000412AVG 270/365 $2684.00 $52426.50Optional flexible spacer blocks: 4 – 6” /100 – 150 mm N220412667 – – 351.00
8” /200 mm N220412668 – – 375.5010 – 12” /250 – 300 mm N220412669 – – 402.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
ModelPipe
Material4
1004½ 120
5 125
6 150
8 200
10 250
12 300
VG412Steel 40 – 80
Ductile Iron Class 53 Min.
VG412 PARTS
Type Pipe
knife Style
Pipe Size Tool Bit Marking
inches | mmPart
NumbersPurchase
Price Each
AWWA Cast and Ductile Iron #
Straight 4 – 6/100 – 150 N220412680 $378.50Angled 4 – 6/100 – 150 N220412568 378.50Straight 8 – 12/200 – 300 N220412679 378.50Angled 8 – 12/200 – 300 N220412569 378.50
Solid Cut-Off Blade N275412055 203.50
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
11-33
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG Vic-Groovers are designed for cut grooving a single size on standard size steel pipe. Vic-Groovers are supplied with an extra tool bit and ratchet handle. 2” and larger tools include a power yoke.
NOTE: Vic-Groovers not recommended for use with a hand-held power drive.
Pipe Standard or “ES” Tool Complete w/Yoke and Extra Tool Bit *
Size inches | mm
Outside Diameter inches
Weight Each Lbs
VG Tool Part Number
EachStandard * ESC\v/20 1.050 11.0 R0000030VG – $1612.001/25 1.315 11.0 R0000040VG – 1612.00
1Z\v/32 1.660 12.0 R0000050VG – 1612.001Z\x/40 1.900 12.0 R0000060VG – 2236.502/50 2.375 12.0 R0000080VG R00E0080VG 2236.50
2Z\x/65 2.875 16.0 R0000100VG R00E0100VG 2104.003/80 3.500 16.0 R0000120VG R00E0120VG 2104.00
3Z\x/90 4.000 18.0 R0000140VG – 2422.004/100 4.500 18.0 R0000160VG R00E0160VG 2422.005/125 5.563 25.0 R0000200VG – 2768.006/150 6.625 25.0 R0000240VG R00E0240VG 2768.008/200 8.625 45.0 R0000320VG R00E0320VG 4004.50
* Tools for PVC and Stainless Steel add $721.00 to the standard tool price.
Size Standard Standardinches | mm Part Number Part Number Price Each Price Each
C\v/20 R0080030VG – $212.50 –1/25 R0080030VG – 212.50 –
1Z\v/32 R0080030VG – 212.50 –1Z\x/40 R0080030VG – 212.50 –2/50 R0080030VG R0640080VG 212.50 $270.50
2Z\x/65 R0080030VG R0640080VG 212.50 270.503/80 R0080030VG R0640080VG 212.50 270.50
3Z\x/90 R0080140VG – 212.50 +4/100 R0080140VG R0640160VG 212.50 258.005/125 R0080200VG – 263.00 +6/150 R0080200VG R0640240VG 263.00 331.508/200 R0300320VG R0640320VG 90.00 266.50
* Tool bits for PVC and Stainless Steel add $721.00 to the standard tool bit price.
Size VG Tool for Cast Pipe (Gray and Ductile)inches | mm Style OD Weight Part Number Price
3/80 Rigid 3.960 20.0 R00R015CVG $2768.003/80 Flexible 3.960 20.0 R00F015CVG 2768.00
4/100 Rigid 4.800 26.0 R00R019CVG 2768.004/100 Flexible 4.800 26.0 R00F019CVG 2768.006/150 Rigid 6.900 27.0 R00R027CVG 2848.506/150 Flexible 6.900 27.0 R00F027CVG 2848.508/200 Rigid 9.050 40.0 R00R036CVG 5740.508/200 Flexible 9.050 40.0 R00F036CVG 5740.50
Size Extra knife for CIinches | mm Style Part Number Price
3/80 Rigid/Flexible R008015CVG $792.004/100 Rigid/Flexible R008015CVG 792.006/150 Rigid/Flexible R008015CVG 792.008/200 Rigid/Flexible R030036CVG 792.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VICTAULIC.COM PL2016-GENERAL-C11-34
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material¾ 20
1 25
1¼ 32
1½ 40
2 50
2½ 60
3 80
3½ 90
4 100
5 125
6 150
8 200
VG
Steel 40 – 80Stainless 40 – 80
Aluminum1 40 – 80PVC Plastic 40 – 80Ductile Iron Cl. 53 Class 53 Min.
Pipe Preparation Tool AccessoriesPower Mule
11-35
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Pipe Preparation Tool Accessories
Power Mule (External Power Source)
Electrical motor, gear driven, 2 hp power source for all Victaulic cut grooving tools with 1” drive connec-tion, integral safety foot switch and reversible motor (requires 115/1/60-20 amp circuit*).
Capacities: Victaulic grooving tools as noted.
* 220V optional
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PricePower Mule (External Power Source) R200700MUL 190/205 $1151.00 $16077.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
PT-100-A Go/No-Go Pipe TapePT-102 AGS Go/No-Go Pipe Tape
PT-100-A Go/No-Go Grooved Pipe Diameter Tape
Pocket-sized steel tapes are available for taking circumferential measurements on pipe sizes C\v – 24”. This diameter tape contains Go/No-Go markings on one side for use with ANSI B36.19 and many ISO-4200 pipe sizes, and diameter markings to 100th of an inch on the other side. Tapes are notched on the lead end to allow proper overlap within the groove for more accurate measurement.
Tool Model Part Number Purchase PricePT-100-A/PT-101 Go/No-Go Grooved Pipe Diameter Tape Each RW75-100-MCH $74.50Box of 6 RW75-100-KIT 433.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
NOTICE
• Tape contains Go/No-Go markings on one side for use with C\v – 24” pipe in ANSI B36.19 and many ISO-4200 sizes and is marked in 1/100th of an inch increments on the other side.
• The Go/No-Go side can be used to check cut or roll grooved pipe conformance to Victaulic original and Machined for Rubber Lining (MRL) (C\v – 12”) and Advanced Groove System (AGS) (14 – 24”) groove diameter specifications.
• Tapes are notched on the lead end to allow proper overlap within the groove for more accurate measurement.
• The Go/No-Go side of the tape is not intended for use on sizes 76.1; 139.7; 165.1; 165.2; 216.3; 267.4; and 318.5 mm steel or stainless steel pipe sizes. For cast or ductile iron pipe sizes (up to 20”), copper tube sizes, and the steel and stainless steel pipe sizes listed above, use the side of the tape marked in 0.01” increments.
• The Go/No-Go pipe tape is a quick reference guide only. To ensure proper grooving dimensions, always refer to the I-100 Victaulic Field Installation Handbook or to the latest groove specifications publications located on victaulic.com.
VICTAULIC.COM PL2016-GENERAL-C11-36
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
PT-102 AGS Go/No-Go Grooved Pipe Diameter Tape
Go/No-Go pocket-sized steel tapes are available for taking circumferential measurements on pipe sizes 8 – 72”/200 – 1800 mm.
Tool Model Part Number Purchase PricePT-102 AGS Go/No-Go Grooved Pipe Diameter Tape RW00102ASY $114.00
NOTICE
• Tape contains Go/No-Go markings on one side for use with Original Groove System sizes 8 – 12”/200 – 300 mm pipe and Advanced Groove System sizes 14 – 72”/300 – 1800 mm pipe in ANSI B36.10/B36.19 and many ISO-4200 sizes. In addition, the PT102 contains markings in 0.02”/0.5 mm increments on the opposite side.
• The opposite side of the diameter tape can be used to check Victaulic original groove specifications in 14 – 42”/200 – 1050 mm pipe sized, including China pipe sizes and JIS specifications 8 – 12”/200 – 300 mm pipe sizes.
• The Go/No-Go pipe tape is a quick reference guide only, it is not a replacement for a calibrated diam-eter measuring instrument. To ensure proper grooving dimensions, always refer to the I-PT102 Victaulic Go/No-Go Pipe Diameter Tape Instructions Manual or to the latest groove specifications publications located on victaulic.com.
Tool Carry Bag Heavy duty tool carry bag for transporting Vic-Easy Roll Grooving Tools, grooving rolls, and other tools. Carry bag can accommodate up to 50 lbs.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsTool
List PriceTool Carry Bag NM15000002 4/6 $96.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Swing Handle Wrench
Swing Handle Wrench SWING HANDLE WRENCH
SizePart Number Purchase
List Price EachZZ\zn” and M\,” Sockets for C\,” and Z\x” Hvy Hex Nuts P000000001 $91.50M\,” and 1Z\zn” Sockets for Z\x” and B\,” Hvy Hex Nuts P000000002 96.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
# Tool discount applies.
Size Reference Chart
Socket Size Hex Nut Size
Coupling Size Inches
Style 72 Style 75 Style 77Style 005 FireLock †
>\zn C\, Std. – – – 1Z\v – 4
C\v Z\x Std. – – – 5 – 6
ZZ\zn C\, Hvy. 1Z\x – 2 1Z\x – 2 C\v – 1 –
M\. Z\x Hvy. 2Z\x – 4 3 – 4 1Z\v – 3 –
1 - 1Z\zn B\, Hvy. 2Z\x – 4 5 – 6 3Z\x – 4 –
† Size 8” Style 005 FireLock coupling requires a standard ZB\zn” socket wrench with handle of sufficient length for correct installa-tion. See installation instructions. IMPORTANT: These Swing Handle Wrench handle lengths are not sufficient for installating Style 07 Zero-Flex couplings.
Vic-Adjustable Cut Grooving Tools for PVC Plastic PipeVPG26
11-37
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Adjustable Cut Grooving Tools for PVC Plastic Pipe
VPG26 Includes Tool with self-contained grooving motor (115/60) and tool bit for Schedule 40 – 80 PVC, crate, operating instructions and tool bit chuck wrench.
Capacities: 2 – 6” Schedule 40 – 80 PVC and similar plastic pipe only.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per Month List PriceVPG26 Cut Grooving Tool R000283VPG 41/46 $1383.00 $20091.50Extra tool bits for 2 – 3Z\x” / 50 – 90 mm standard radius cut grooving R045283VPG – – 405.00
Extra tool bits for 4 – 6” / 100 – 150 mm standard radius cut grooving R019283MAC – – 412.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material 2 50
2½ 60
3 80
3½ 90
4 100
5 125
6 150
VPG26 PVC Plastic 40 – 80
VPG824
VPG824 Includes Tool with self-contained grooving motor (115/50) and tool bit for Schedule 40 – 80 PVC, crate, operating instructions, and tool bit chuck wrench.
Capacities: 8 – 16” Schedule 40 – 80 PVC and similar plastic pipe only
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per Month List PriceVPG824 Cut Grooving Tool R000826VPG 47/53 $1907.50 $28578.00Extra tool bits for 8”/200 mm standard plastic radius cut grooving R025826MAC – – 755.50
Extra tool bits for 10 – 16”/250 – 400 mm standard plastic radius cut grooving R023826MAC – – 488.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Ratings — Maximum Pipe Size Capacity Pipe Size (in | mm) / Schedule
Model Pipe Material 8 200
10 250
12 300
14 350
16 400
VPG824 PVC Plastic 40 – 80
Hole Cutting ToolsVHCT900
VICTAULIC.COM PL2016-GENERAL-C11-38
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Hole Cutting Tools
VHCT900 Includes three-piece hole cutting tool (Base, drill motor and feed assembly), arbor assembly, coupon remover, 2 pilot drills with coupon retaining springs and operating instructions. Requires grounded 120/1/60 – 10 amp electrical supply. (220/1/60 – 10 amp no cost option)
Capacities: 1 – 3Z\x” holes for Z\x – 3” Mechanical-T, Strapless Outlet connections.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceVHCT900 – 110V R000900HCT 36/61 $948.50 $10771.00
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
HCT908
HCT908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x” carbon and stainless steel pipe. This allows for use of Mechanical-T, Strapless Outlet, Thermometer Outlet, and Style 922 Outlet Tee. The speed is variable and requires 110 volt power supply to operate.
Capacities: 1 – 4Z\x” holes for Z\x – 4” Mechanical-T, Strapless Outlet connections.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List PriceHCT908 R000908HCT 35/48 $802.50 $4804.50
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Accessories
Accessories Saw Diameter inches | mm Part Number
Purchase List Price Each
1/25.4 N-M18-000-011 $123.501Z\v/31.8 N-M18-000-016 123.501Z\x/38.1 N-M18-000-021 123.501C\v/44.5 N-M18-000-026 123.502/50.8 N-M18-000-031 167.50
2C\,/60.33 N-M18-000-036 167.502Z\x/63.5 N-M18-000-037 167.502C\v/69.9 N-M18-000-040 167.503Z\x/88.9 N-M18-000-047 167.50
4Z\x/114.3 N-M18-000-050 351.00
Part Name Part NumberPurchase List Price
Arbor (Mandrel) R-400-900-HCT $238.00Arbor (1”/ 25.4 mm saw only) R-450-900-HCT 238.00Coupon Retaining Pilot Drill R-402-900-HCT 97.50Chuck Key Assembly R-314-900-HCT 126.00Levels N-M14-000-006 26.50Coupon Remover Assembly R-050-900-HCT 42.50Long Chain – For Strapless Outlet * R-170-900-HCT 1527.50
* For use with VHCT900 to accommodate pipe sizes greater than 610.0 mm.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Vic-Tap II Hot Tap
11-39
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Tap II * Parts A and B are designed for use with Vic-Tap II Mechanical-T units; (Part C) for tapping into systems under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6x 2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Tool Model Part Number
Shipping Weight
LbsRental
Per Month List PriceVic-Tap II - Parts A and B only R-000-902-VT2 70 $880.00 $14978.00Part A only R-100-902-VT2 – – 7202.00Part B only R-300-901-VT1 – – +Part C 4 x 2Z\x”/100 – 65 mm R-016-931-010 – – 5895.005 x 2Z\x”/125 – 65 mm R-020-931-010 – – 5895.006 x 2Z\x”/150 – 65 mm R-024-931-010 – – 5895.008 x 2Z\x” /200 – 65 mm R-032-931-010 – – 5895.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $951.00. Part. No. N-E15-000-004.
NOTE: 40”/1016 mm minimum clearance is required for the Vic-Tap II.
Pipe Cut-Off ToolsVCT1 - Manual
VICTAULIC.COM PL2016-GENERAL-C11-40
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Pipe Cut-Off Tools
VCT1 VCT1 Manual handles 4 – 24” pipe up to 0.500” thick. A worm gear drive crank handle provides smooth, manual travel, easy control and accurate cutting. Tools are supplied with one each #00, #0, and #1 acety-lene tip. Other tips are available for propane, MAPP and other gases. Tools are supplied with tip cleaner and lighter.
Capacities: 4 – 24” pipe *
Wall Thickness: 0.065” – 0.0500” (with tips supplied)
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsTool
List PriceVCT1 R000911VCT 22/29 $7597.00
* To increase capacity, a 40-inch chain is available for $916.00 (Part No. N-C00-002-VCT).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
VCT2 - Automatic
VCT2 VCT2 Automatic is powered by a 120 VAC motor with SCR remote control. A steel guide rail is recom-mended for cuts on vertical pipe (over 12” diameter). Tools are supplied with one each #00, #0, and #1 acetylene tips. Other tips are available for propane, MAPP and other gases. Tools are supplied with tip cleaner and lighter.
Capacities: 6” – 24” pipe *
Wall Thickness: 0.065” – 0.0500” (with tips supplied)
Speed Control: SCR
Power Required: 120 VAC
Motor Rating: 15 W 10,000 rpm
NOTE: Guide rail is sold separately. Recommended for pipe 14” and above.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs List PriceVCT2 R000912VCT 33/39 $20863.00Guide Rail D-600 for up to 24”/600 mm pipe NC00170VC2 – 4438.00
* To increase capacity, a 40-inch chain is available for $916.00 (Part No. N-C00-002-VCT).
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Accessories
Accessories VCT1 & VCT2 STANDARD TIP FOR ACETYLENE (102)
Size Part Number Price Each00 N-C00-102-T00 $120.000 N-C00-102-0T0 120.001 N-C00-102-0T1 120.00
FLASHBACk ARRESTOR QUICk DISCONNECT
Size Part Number Price EachFuel Assy. – ZOSP – 2A N-CZS-000-P2A $320.50Oxy. Assy. – ZOSP – 1A N-CZS-000-P1A 320.50Fuel Plug – ZOP – 2A N-CZ0-000-P2A 215.50Oxy. Plug. – ZOP – 1A N-CZ0-000-P1A 215.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
How to Order
11-41
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
WARNINGAlways read and understand all operating and maintenance instructions before attempting to use any Victaulic pipe preparation tools.Victaulic tool operating and maintenance manuals can also be located at www.victaulic.com
Any Victaulic pipe preparation tools must be used by trained operators ONLY. Operators that use Victaulic Pipe Cut-Off Tools must be knowledgeable in sound welding and safety procedures.
Misuse of any equipment and lack of adherance to proper safety procedures may result in serious personal injury, property damage, and/or product damage.
How to Order When ordering tools or tool parts, please include the following information:A. PARTS ORDERS1. Tool Model Number. Example: VE272SFS. 2. Tool Serial Number. The serial number can be found on the tool name plate.3. Part Number and Description. Example: Part #09, R-201-261-0FS, Pump. 4. Where to send the part(s). Company Name, Address and Telephone Number5. Attention: Person’s Name6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. B. TOOL ORDERS1. Tool Model Number. Example: VE416FSD. 2. Tool Description. Example: Vic-Easy VE416FSD Roll Grooving Tool. 3. Where to send the tool. Company Name, Address and Telephone Number4. Attention: Person’s Name5.Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. C. TOOL RENTAL ORDER1. A completed and signed tool rental agreement. 2. Purchase Order Number. 3. Tool Model Number. Example: VE272SFS4. Tool Description. Example: Vic-Easy VE272SFS Roll Grooving Tool. 5. Where to send the tool. Company Name, Address and Telephone6. Attention: Person’s Name. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. NOTES: Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving. PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116. Copper/nickel pipe - contact Victaulic for details. Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets. Note: Vic-Easy tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove Dimension charts and to ANSI/AWWA C-606 standards. SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done. Optional rolls are available at an additional cost.
VICTAULIC.COM PL2016-GENERAL-C11-42
Pipe Preparation ToolsSE
CTI
ON
10
PI
PE
PR
EPA
RAT
ION
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Terms and Conditions of Tool Rental
TERMS AND CONDITIONS OF TOOL RENTAL1. AGREEMENT. Lessor rents to Lessee and Lessee leases from Lessor the grooving tools and accessories listed on a Grooving Tool Rental Agreement,
hereinafter leased property, for the term specified, commencing when the leased property is delivered to carrier for delivery to Lessee.
2. RENTAL RATE. Lessee agrees to pay rent at the monthly rates in effect at the time the rental order is placed, and at the time of invoicing for subse-quent months as specified in the current tool published price list. If the lease is terminated any time during a month, rental charges will be prorated on a daily basis, with a minimum of one week charge or $50 whichever is greater. Payment of invoices that will be issued at the end of each billing month is due in 30 days from date of invoice.
3. ON-ACCOUNT PREPAYMENT. At the Lessor’s option, an on-account prepayment may be required of the Lessee to establish credit. When required, the cheque of the amount specified by the Lessor must be given to the Lessor to execute the agreement. Upon termination of the lease the amount, less any open invoices or payment for damages by reason of other than normal recommended use, shall be returned.
4. FREIGHT. To Lessee: F.O.B. Shipping point (lessors option), freight charges collect Lessee shall pay shipping charges for return of leased property.
5. USE. All leased property is for the exclusive use of Lessee only, and may not be sublet or loaned to or used by any other party without the prior writ-ten consent of the Lessor.
6. OWNERSHIP. Lessee acknowledges that title to the leased property is and shall remain in Lessor at all times.
7. TAXES. Lessee shall pay all taxes, assessments, license and registration fees levied on or in respect of the leased property, or the rental thereof, during currency of this lease. Lessee shall pay all sales taxes invoiced by Lessor unless the Lessor provides a valid tax exemption certificate.
8. ACCESS. Lessor shall at all times have free access to the leased property and to the premises on which it is located for the purpose of examining the property.
9. RETURN OF PROPERTY. Lessee shall return all leased property to Lessor in good order and condition, reasonable wear and tear expected, upon termination of the lease, and shall return the leased property, properly crated, freight prepaid and insured for its full market value to Lessor at main or branch warehouse. If Lessee fails to return the leased property upon lease termination, Lessee shall continue to be liable to pay rent until so returned, and Lessor shall also have the complete unrestricted right to remove the leased property from Lessee’s premises, without recourse to any legal pro-ceedings.
10. REPAIRS AND SERVICING. If leased property, excluding Tool Bits, becomes worn or unserviceable from normal recommended use, Lessor will supply tools and/or parts, without additional cost, upon return of the leased property to Lessor, freight prepaid in accordance with item #9.
11. DAMAGE OR LOSS. If leased property is damaged by reason of other than normal recommended use, or damaged by fire, loss or theft, Lessee shall indemnify Lessor for the cost of repairs or replacement. If leased property Is not returned to Lessor in accordance with the terms of this agreement, Lessee shall pay to the Lessor as liquidated damages an amount equal to the published net user price of the leased property. If leased property is returned less the container wrench set or other accessories supplied with the leased tool, Lessee shall pay to the Lessor the cost of replacement by the Lessor.
12. LIABILITY. Lessee assumes full responsibility for the operation of the leased property and agrees to hold Lessor harmless from any and all claims for injuries or damages arising out of the use of the leased property except those occasioned by Lessor’s negligence. Lessor makes no representation or warranty is no condition expressed or implied, statutory or otherwise, concerning the leased property, its quality, fitness for particular purpose or mer-chantability except as herein otherwise expressly provided Lessor shall under no circumstances have any liability, including without limitation, liability for consequential damages occasioned by the use or operation or leasing of the leased property hereunder.
13. REMEDIES ON DEFAULT. If the Lessee fails to pay any rent or other amount herein provided and such failure continues for a period of 15 days after the due date for such payment, the Lessor may by notice in writing at its option declare the term of this lease to be terminated (whereupon all future payments shall become immediately due and payable hereunder as liquidated damages for loss of a bargain and not as a penalty) whereupon the Lessee shall forthwith redeliver the leased property to the Lessor at the Lessee’s sole cost and expense and otherwise in accordance with the provi-sions of paragraph #9 hereof.
EFFECTIVE OCTOBER 1, 2008
Warranty
Standard product warranty applies. See inside back cover page.
11-43
Pipe Preparation ToolsSEC
TION
10
PIPE
PR
EPA
RATIO
N TO
OLS
VICTAULIC.COM PL2016-GENERAL-C
Terms and Conditions of Sale
Terms and Conditions of SaleTerms and Conditions of Sale to Victaulic Distributors
1. SALES TAX is extra where applicable..
2. TERMS OF PAYMENT are net 30 days.
3. MINIMUM INVOICE CHARGE is $100.00 net for any single order.
4. SHIPPING TERMS F.O.B. Shipping Point (our option), Freight prepaid and allowed on single orders having a net price value of $8,500 and over, for shipment at one time to distributor’s warehouse excluding the Northwest Territories, the Yukon and Nunavut. Freight Collect on single orders less than $8,500 net. Special shipping methods or packaging are available at the distributor’s expense. Additional freight charges may be incurred for specific product lines (i.e. large diameter couplings, fittings, valves and expansion compensators.
5. ROUTING The most economical routing to recognized delivery points will be used at our discretion. If special routing is desired, order should so state.
6. SHIPMENT DATE We accept your order subject to the approval of our Credit Department and contingent upon strikes, accidents and causes beyond our control and to the conditions hereafter set out. Victaulic will endeavour to ship by the scheduled delivery date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
7. SHORTAGES All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods. We prove our count by weight. Claims for shortages are subject to that test.
8. SHIPPING LOSS, DAMAGE OR DELAY All shipped material become the property of the buyer when the freight company takes delivery of the products even if prices quoted includes freight charges. The freight company is responsible to the buyer for complete and safe deliv-ery of the goods. It is the buyer’s responsibility to file claim with the freight company of any loss, damage of incomplete delivery of goods purchased. For your own protection, have the transportation company’s agent verify damages, shortages or transport delays and note them on freight bill over his signature. Victaulic’s responsibility ceases when goods are delivered to the carrier in good condition and its receipt obtained.
9. CANCELLATIONS Orders accepted cannot be countermanded without our written consent. Orders for all non-standard (non-cancellable and non-returnable) items whether in the price list and indicated by prices in shaded areas, or made to order, cannot be cancelled.
10. MATERIAL RETURNS Sale is final of all non-standard (non-cancellable and non-returnable) items, whether in the price list and indicated by prices in shaded areas, or made to order. Victaulic reserves the right to change the standard/non-standard item designation without notice. Return will be authorized for such material only in the case of Victaulic shipping or order processing error that is reported in no more than 10 days of shipment. Surplus Victaulic products that are accepted for return will be authorized with a Return Material Authorization (RMA) number and an estimate of credit that is based on original invoice amounts. Any material returned to Victaulic will be accepted only if clearly marked with an RMA number and received in one shipment. Credit will be offered only for standard price list items (indicated by prices not shaded) that can be made resalable. Valves must be resalable and packaged as originally shipped. Valves will not be refurbished. Sprinkler heads must be returned in unopened original factory standard lot packaging and in resalable condition without evidence of tam-pering or damage. No credit will be given for gaskets whether loose or in couplings. Final credit will be less a 35% restocking charge, refur-bishing costs and original freight paid. On amounts returned with a net value totaling under $500, the restocking fee will be $175 minimum. Further conditions may apply on return of certain materials. Contact Victaulic for details when considering a return.
11. CHANGES TO TERMS No alteration, modification or waiver of these terms and conditions whether on customer’s purchase order or otherwise shall be valid unless the change is specifically accepted in writing by an authorized representative of Victaulic.Victaulic Company of Canada maintains a continual policy of product improvement and, therefore, reserves the right to change prices, terms
and conditions of sale, product specifications, designs, and standard equipment without notice and without incurring obligation.Warranty, Victaulic Sales and Service Centers
WarrantyWe warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been defective.
THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.
This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of Victaulic’s factory or which has been used in a manner contrary to Victaulic’s instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete information supplied by the Buyer or its representatives.
Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.EFFECTIVE APRIL 7, 2014
victaulic.com
VICTAULIC® LOCATIONS IN CANADA
RICHMOND HILL123 Newkirk RoadRichmond Hill, ON L4C 3G5905 884 7444905 884 9774 (fax)
victaulic.com
VANCOUVER8129 River WayDelta, BC V4G 1L2604 940 3301604 940 3360 (fax)
EDMONTON17329 111th Avenue NWEdmonton, AB T5S 0J5780 452 0680780 452 2430 (fax)
SUDBURY1070 Elisabella StreetSudbury, ON P3A 5K2705 560 9595705 560 9490 (fax)
MONTREAL5895 rue KieranSaint Laurent, QC H4S 0A3514 337 3500514 337 1949 (fax)
GENERAL PRICE LIST
PL2016-GENERAL-C 9218 REV B 03/2016VICTAULIC AND ALL OTHER VICTAULIC MARKS ARE THE TRADEMARKS OR REGISTERED TRADEMARKS OF VICTAULIC COMPANY, AND/OR ITS AFFILIATED ENTITIES, IN THE U.S. AND/OR OTHER COUNTRIES. © 2016 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
GENERAL PRICE LIST
PL2016-GENERAL-C Effective February 1, 2016
GENERAL PRICE LISTEffective February 1, 2016