FOSC 450Gel-Sealed Fiber Optic Splice Closure
ORDERING GUIDE
Welcome to the FOSC 450 Fiber Optic Splice Closure Ordering Guide. This Guide is designed to provide you with the information you need to
specify and purchase FOSC 450 splice closures and accessories you need for your fi ber network.
FOSC 450 fi ber optic splice closures are used worldwide!
Please note that this ordering guide is designed for FOSC 450closures as they are confi gured for North America, Mexico, the Caribbean,
and Central America. For information regarding FOSC 450 closures for other areas of the world, please refer to www.telecomosp.com or contact your local sales or
customer service representative.
Information subject to change. For the latest information, see the FOSC 450 Closure Ordering Guide at: http://media.telecomosp.com/downloads/pdf/US/Fiber/og/fosc450og.pdf
Table of Contents
PRODUCT INTRODUCTION
Closure Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FOSC 450 Closure Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Splice Capacities and Characteristics Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Typical Closure Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ORDERING INFORMATION
Ordering Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Description and Ordering Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Commonly Requested Kit Confi gurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Commonly Requested Accessory Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
FOSC 450 CLOSURE ACCESSORIES
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Cable Termination Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Cable Sealing Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Splice Tray Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Fiber Management and Routing Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Slack Storage Basket Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Grounding Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Closure Mounting Hardware Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Splitters Description Key and Product List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 CWDM’s Description Key and Product List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Passives: CWDM Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Miscellaneous Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
ADDITIONAL FOSC CLOSURE PRODUCTS
Introduction to Additional FOSC Closure Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 FOSC Closure Family . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ENGINEERING INFORMATION
Engineering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Closure Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 FOSC 450 Closure Family Assembly Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Splice Tray Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 FOSC Fiber Optic Splice Closures Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
FOSC 450 fi ber optic splice closures are a family of single-ended closures designed for use most anywhere there are fi ber splicing and storage needs.
These closures are available in fi ve sizes, each featuring:• Re-usable compressed gel cable sealing
components that accommodate a wide range of cable sizes
• Capability to accommodate a variety of cable styles including loose tube or central core tube cables with single or ribbon fi bers
• Hinging splicing trays that provide controlled access to splices and slack storage
• Splice and storage compartments accessible via a removable dome-clamp system
• Thermoplastic outer materials that withstand temperature and contaminate extremes
• Slack storage baskets of various sizes that provide different slack storage scenarios
• Many shared components between closure sizes
• A range of accessories for a variety of outside plant needs
FOSC 450 Fiber Optic Splice Closures
A family of closures designed for your fi ber network needs!
450 ASmallest of the FOSC 450 closure family.• 4 cable entry ports, each with multi-cable
capability• 96 single fi ber/144 mass splice capacity• 19" long by 8" diameter* • Capacity of up to 8 drop cables in
addition to a feed-through cable• Compact size for FTTH applications • Accessories available for a wide variety
of applications
450 B ShortOne of the smaller 450 closures.• 6 cable entry ports, each with multi-
cable capability• 144 single fi ber/288 mass splice capacity• 19" long by 9.2" diameter*• Uses A size splice trays• Capacity of up to 16 drop cables in
addition to a feed-through cable• Fits applications requiring large splice
capacity in a small size • Accessories available for a wide variety
of applications
450 BThe mid-size FOSC 450 closure.• 6 cable entry ports, each with multi-
cable capability• 144 single fi ber/288 mass splice capacity• Increased slack storage capacity over
the B Short closure• 24" long by 9.8" diameter*• Capacity of up to 16 drop cables in
addition to a feed-through cable• Accessories available for a wide variety
of applications
450 CCombining the well accepted FOSC 450 D closure with a short overall length (23"), the 450 C fi ts applications where increased splice capacity and small size are a must: • 6 cable entry ports, each with multi-
cable capability• 192 single fi ber/864 mass splice
capacity• 23" long by 11.5" diameter*• Capacity of up to 16 drop cables in
addition to a feed-through cable• Wide-style splice tray• Accessories available for a wide variety
of applications• Field upgradeable to the 450D size
450 DThe largest of the FOSC 450 closure line, the 450 D is capable of handling a wide range of fi ber closure needs:• 6 cable entry ports, each with multi-
cable capability• 576 single fi ber/1152 mass splice
capacity• 30" long by 11.5" diameter*• Wide-splice tray• Accessories available for patching,
rehabilitation and a wide variety of applications
• Capacity of up to 16 drop cables in addition to a feed-through cable
* Diameter measurements are based on the widest diameter points and include the clamp hinge and latching mechanisms. Diameters of the clamps not including the hinge and latch are approximately 1 inch less.
FOSC 450 Closure Family
These charts represent the capacities of each of the FOSC 450 closure sizes. Capacities may vary due to application variables, such as the amount of slack storage required.
Closure Capacities & Characteristics
Type/Size D6 C6 B6 BS A4
Closure Size1 (inches) 11.5 dia. 30 L 11.5 dia. 23 L 9.8 dia. 24 L 9.2 dia. 19 L 8 dia. 19 L Approx. Closure Weights (lbs) 20 16 13 10 6 Closure Capacity End-to-End Splicing Single Splice (SM6 Modules) 288 96 72 72 48 Single Splice (SM12 Modules)2 576 192 144 144 96 Mass Fusion Splice 1152 864 288 144 144 Mid-Sheath Splicing Single Splice 576 192 144 144 72 Mass Fusion Splice 864 432 288 288 216 Trays Per Closure Standard Trays 85 / 63 / 54 85 / 63 / 54 65 / 63 / 44 65 / 63 / 24 45 / 33 / 24 Ribbon Trays 45 / 33 / 24 45 / 33 / 24 35 / 33 / 24 33 13
Single Fiber Splice Capacity per Tray SM6 Modules 36 12 12 12 12 SM12 Modules2 72 24 24 24 24 FIST Modules2 96 n/a n/a n/a n/a Patching Tray (quantity/type) Yes No Yes No No (12,16/sc) (12,16/sc) Basket (quantity/type) Yes No Yes Yes Yes (4/all, 8/sc) (4/all, 8/sc) (4/all, 8/sc) (4/all, 8/sc) Sealing System Closure Dome-to-Base or “O” Ring/ “O” Ring/ “O” Ring/ “O” Ring/ “O” Ring/ Top-to-Bottom Clamp Clamp Clamp Clamp Clamp Cable Capacity Butt (std./max.) 6 / 167 / 218 6 / 167 / 218 6 / 167 / 218 6 / 167 / 218 4 / 107 / 138
Inline (std./max.) n/a n/a n/a n/a n/a Fire Retardant Closure Available No9, 10 No9 No9, 10 No9 No9
Tools Required Can Wrench, Can Wrench, Can Wrench, Snips Can Wrench Snips Snips Snips Snips
1 Closure length (“L”) plus 10X largest cable diameter installed equals the overall length required for handhole. Maximum dimensions includes clamp and cable sealing.
2SMOUV splice protection sleeves should be used.3With standard basket.4 With tall basket. 5Flexible sock is used for LBT storage..
6The ribbon tray can also be confi gured with 12 SC adapters for patching and provide 12 single splice capacity.7 If using the 3-cable Multicable kit, 3 fl at or 3 round cables per port if cable does not exceed <0.25” diameter8If using the 4-cable Multicable kits and combined cables do not exceed 1” diameter.9Fire Retardant bag or blanket options.10Fire Retardant closures available in FOSC 400 family.
Characteristics Chart
Single Fiber Application
Ribbon Application Using Ribbon Trays
0 96 144 192 288 576
0 144 288 432 864 1152
Typical Closure Kit Contents include:• Dome• Clamp• O-ring• Base• Gel sealing block with compression trigger• Plugs for unused cable ports• Tray tower to hold hinging FOSC splice
trays• FOSC splice trays (quantity according
to the ordering description)• Cable retention hardware (quantity
according to the ordering description)• Miscellaneous hardware, including fi ber
routing (transportation) tubing, cable retention clamps, strength member retainers, etc.
• Installation Instructions
Typical Closure Kit Contents
DomeThe dome is made from a polymer, with ribbing added for extra strength. Five different sizes are avail-able (A, BS, B6, C6, D6), matching the fi ve closure sizes in the family.
BaseThe base houses the gel block cable sealing system and is the foundation for the tray tower and cable attachment/retention hardware.
Gel Block with TriggerThe gel block provides the sealing mechanism for cables entering the closure. Available with six cables entry ports (450 B, BS, C or D) or four (450 A size only). (Not Sold Separately)
Dome to Base SealDomes are attached to the base by means of a clamp. Dome-to-base sealing is accomplished via a compressed O-ring.
Cable Retention HardwareCable strain relief and strength member termination hardware.
8
Ordering Information
Making the information work for you.
FOSC 450 fi ber optic splice closures can be ordered in a variety of confi gurations to maximize effi ciency and minimize up front cost. The following pages provide closure choices and the steps to be followed when specifying FOSC 450 closure confi gurations.
In addition, we have supplied a list of commonly requested closure confi gurations.
FOSC 450 - XX - X - XX - X - XXX
Closure Size: A4, BS (B Short), B6, C6, or D6
Termination Hardware Quantity for the Kit: 2, 4, or 6
Capacity and Type of Splice Tray
Quantity of Splice Trays Factory Installed(Choose either “0” trays (no trays installed) or “1” tray installed. Additional trays sold separately.)
Slack Basket Type
Feed-through Ground Quantity
Whether Flash Test Valve is Desired(Valved version is standard.)
Valve for Flash TestingV - Valve (standard)N - No ValveNote: We recommend fl ash test valves for FOSC closures. However, non-valved closures are available upon request.
Number of Ground Feed-through Lugs 0 - No grounding1 - 1 ground feed-through lug (A4 only, N/A for BS)3 - 3 ground feed-through lugs (B6, C6, and D6 closures
only, N/A for BS)6 - 6 ground feed-through lugs (C6 and D6 closure only,
N/A for BS)Note: FEG and MEG kits provide optional ground isolation for FOSC 450 closures.
Slack Basket TypeN - No BasketA - A4 Standard Size B - B6, BS Standard SizeC - C6 Standard SizeD - D6 Standard SizeE - Special Bulkhead Basket arrangement for B, BS closures onlyT - Tall SizeS - Stackable Trays in D ClosureNote: D-size closures with “N” option include backbone used to route ribbons to ribbon trays. A and B-size closures include storage “sock.”
Closure Size (inches) A4 - 4 cable entry ports; 8 dia. x 19 long BS - 6 cable entry ports; 9 dia. x 19.5 long B6 - 6 cable entry ports; 10 dia. x 24 long C6 - 6 cable entry ports; 11.5 dia. x 23 long D6 - 6 cable entry ports; 11.5 dia. x 30 long
Termination Hardware Quantity for the Kit 2 - 2 cable attachments included 4 - 4 cable attachments included 6 - 6 cable attachments included (N/A for A size)
Capacity and Type of Splice Tray NT - No tray installed in factory 12 - A, B, or C tray with two SM6 splice modules24* - A, B, or C tray with two SM12 splice modules 36 - D tray with six SM6 splice modules72* - D tray with six SM12 splice modulesR1 - A, B size ribbon tray (accommodates 12 ribbons/144 fi bers)R2 - D size ribbon tray(24 ribbons/288 fi bers)R3 - C size ribbon tray(18 ribbons/216 fi bers) SF - Stackable single fusion trays (12 splices) *Note: SMOUV (1120-01-US) splice protection sleeves are highly recommended for use with SM12 splice modules.
Quantity of Splice Trays Factory Installed0 or 1 is standard(Choose either “0” trays (no trays installed) or “1” tray installed. Additional trays sold separately.)
Follow the steps to choose the desired closure. Then simply match the step to the description key.
Ordering FOSC 450 Fiber Optic Splice Closures
Description Key:
See Quick Reference Guide in the back of this catalog for additional details
Commonly Requested Closure Kits
Class A List
FOSC 450A FOSC 450B Short FOSC 450B FOSC 450C FOSC 450D
FOSC450-A4-4-NT-0-A1V FOSC450-BS-6-NT-0-B0V FOSC450-B6-6-NT-0-B3V FOSC450-C6-6-NT-0-C6V FOSC450-D6-6-NT-0-D6V
FOSC 450A
FOSC450-A4-4-12-1-A0V
FOSC450-A4-4-12-1-A1V
FOSC450-A4-4-24-1-A0V
FOSC450-A4-4-24-1-A1V
FOSC450-A4-4-NT-0-A0V
FOSC450-A4-4-R1-1-A0V
FOSC450-A4-4-R1-1-A1V
FOSC450-A4-4-NT-0-T0V
FOSC450-A4-4-NT-0-T1V
FOSC 450BS
FOSC450-BS-6-12-1-B0V
FOSC450-BS-6-12-1-T0V
FOSC450-BS-6-24-1-B0V
FOSC450-BS-6-24-1-T0V
FOSC 450B
FOSC450-B6-6-12-1-B0V
FOSC450-B6-6-12-1-B3V
FOSC450-B6-6-24-1-B0V
FOSC450-B6-6-24-1-B3V
FOSC450-B6-6-NT-0-B0V
FOSC450-B6-6-R1-1-B0V
FOSC450-B6-6-R1-1-B3V
FOSC450-B6-6-NT-0-T0V
FOSC450-B6-6-NT-0-T3V
FOSC 450C
FOSC450-C6-6-12-1-C0V
FOSC450-C6-6-12-1-C3V
FOSC450-C6-6-12-1-C6V
FOSC450-C6-6-24-1-C0V
FOSC450-C6-6-24-1-C3V
FOSC450-C6-6-24-1-C6V
FOSC450-C6-6-NT-0-C0V
FOSC450-C6-6-R3-1-C0V
FOSC450-C6-6-R3-1-C3V
FOSC450-C6-6-R3-1-C6V
FOSC450-C6-6-NT-0-T0V
FOSC450-C6-6-NT-0-T6V
FOSC 450D
FOSC450-D6-6-36-1-D0V
FOSC450-D6-6-36-1-D3V
FOSC450-D6-6-36-1-D6V
FOSC450-D6-6-72-1-D0V
FOSC450-D6-6-72-1-D3V
FOSC450-D6-6-72-1-D6V
FOSC450-D6-6-NT-0-D0V
FOSC450-D6-6-R2-1-D0V
FOSC450-D6-6-R2-1-D3V
FOSC450-D6-6-R2-1-D6V
FOSC450-D6-6-NT-0-T0V
FOSC450-D6-6-NT-0-T6V
Class B List
Class C List
All other closure confi gurations are available as Class C products. Contact your salesperson for further information.
In order to provide customers with cost and inventory efficient options, FOSC 450 fiber optic splice closures are classified in three categories as shown
below:
A: Basic kits. Lower comparable cost. Lowest targeted lead time.
B: Standard kits. Includes splice tray, basket, and grounding options.
C: Non-standard kits. Contact your local salesperson for further information.
Information subject to change. For the latest information, see the FOSC 450 Closure Ordering Guide at: http://media.telecomosp.com/downloads/pdf/US/Fiber/og/fosc450og.pdf
Commonly Requested Accessory Kits
Splice Trays:
FOSC 450 Fiber Optic Splice Closures are accompanied by a wide variety of splice trays and tray accessories including those for storing single and/or ribbon (mass) fusion splices, ribbon splices with ribbon slack on the same tray, and patching trays.
Multi-Cable Sealing Accessories:
FOSC 450 closures can accommodate multiple cables entering a cable entry port by utilizing multi-cable sealing kits. Several styles of multi-cable kits are available.
Mounting Hardware:
Many mounting hardware options are available for mounting closures in the various outside plant environments.
Slack Storage Baskets:
Closures are typically supplied with standard size slack storage baskets. Tall version baskets (for storing additional slack) are also available.
Splitters and WDM’s:
A wide range of splitters and CWDM’s are available, whether on FOSC trays or fi eld installable.
See the Accessories section, pages 12 through 23, for additional details!
12
Accessories
Extras that make your job easier
While each FOSC 450 closure kit comes outfi tted with components needed for installation, a full line of accessories is also available…from splice trays, to multi-cable-per-port sealing kits, to a range of mounting hardware options…to meet your splice closure needs.
The following is a listing of the most commonly requested accessories, categorized for your convenience. Additional accessories are also available.
If you are unable to locate an accessory you need, please check our web site:www.us.telecomosp.com, or contact your local salesperson or our Customer Service team for additional information.
Cable Termination Accessories
Closure Sealing Accessories
Closure Part Grounding Kits/ Size Number Description Cables Hardware Kit Contents Pkg.
A Only D20592-000 FOSC-ACC-450-A-CBLTERM 1 Port No Cable retention hardware, strength member retention hardware 5
A Only C67369-000 FOSC-ACC-450-A-CBLTERM-G 1 Port Yes Cable retention hardware; strength member retention hardware 5
BS Only D25359-000 FOSC450-CABLE-TERM-4-BS 4 Ports No 4 sets each: cable retention 1hardware (with hose clamps),strength member retention hardware
B, C, D F67166-000 FOSC450-CABLE-TERM-2-N 2 Ports No 2 sets each: cable retention 1hardware (with hose clamps),strength member retention hardware
B, C, D C61629-000 FOSC450-CABLE-TERM-2-G 2 Ports Yes 2 sets each: cable retention 1hardware (with hose clamps),strength member retention hardware; ground wires
B, C, D 558850-000 FOSC450-CABLE-TERM-4-N 4 Ports No 4 sets each: cable retention 1hardware (with hose clamps),strength member retention hardware
B, C, D 659136-000 FOSC450-CABLE-TERM-4-G 4 Ports Yes 4 sets each: cable retention 1hardware (with hose clamps),strength member retention hardware, ground wires
Closure Cables Key Sealing Size Sealed1 Components Part Number Description Kits/Pkg
Multiple Cables/Drop Cables per Port Seals All 3
Quick Install Gel Plug A38215-000 FAK-MULDRP-45-3-DRP 10
40606V-000 FAK-MULDRP-45-3/CBL-ATT* 10 All 4 Gel Tape Wrap 41606V-000 FAK-MULDRP-45-4-DRP 10 E21473-000 FAK-MULDRP-45-4/CBL-ATT* 10 All 4 Quick Install Gel Plug XJ261N-000 FAK-MULDRP-45-4P-DRP 10 1F6818-000 FAK-MULDRP-45-4P/CBL-ATT* 10
Port Plugs (used to plug empty cable ports) All N/A Port Plug A05721-000 FOSC-ACC-450-PORT-PLUGS 50
Replacement O-Rings (fits between done and base) 450A N/A O-Ring 381107-000 FOSC-ACC-400AB-450A-ORIN 5 450BS N/A O-Ring HG302N-000 FOSC-ACC-450-BS-ORING 5 450B N/A O-Ring A51343-000 FOSC-ACC-450-B-ORING 5 450C N/A O-Ring 429631-000 FOSC-ACC-D-O-RING-SEAL 5 450D N/A O-Ring 429631-000 FOSC-ACC-D-O-RING-SEAL 51Combined cable diameters must be within cable port size requirements. *Cable Attachments Included
3-Cable Seal with Cable Attachment Kit (assembled)
450 A CableRetention Plate
450 BS, B, C, D Cable Retention Plate
4-Cable Seal with Cable Attachment Kit
B version shown
Includes SMOUV Closure Tray Protection Kits/ Size Capacity Sleeve Part Number Description Kit Includes Pkg A 12 No 497817-000 FOSC-ACC-A-TRAY-12 Tray & clear cover with 2 SM-6 splice modules, tie-wraps, instructions 2 A 12 Yes HL0017-000 FOSC-ACC-A-TRAY-12-SMV60 Tray & clear cover with 2 SM-6 splice modules, 12 60MM SMOUV 2 splice protection sleeves, tie-wraps, instructions A 24* No 429567-000 FOSC-ACC-A-TRAY-24 Tray & clear cover with 2 SM-12 splice modules, tie-wraps, instructions 2 A 24 Yes EB063E-000 FOSC-ACC-A-TRAY-24-SMV60 Tray & clear cover with 2 SM-12 splice modules, 25 60MM SMOUV 2 splice protection sleeves, tie-wraps, instructions BS 12 No 497817-000 FOSC-ACC-A-TRAY-12 Tray & clear cover with 2 SM-6 splice modules, tie-wraps, instructions 2 BS 12 Yes HL0017-000 FOSC-ACC-A-TRAY-12-SMV60 Tray & clear cover with 2 SM-6 splice modules, 12 60MM SMOUV 2 splice protection sleeves, tie-wraps, instructions BS 24* No 429567-000 FOSC-ACC-A-TRAY-24 Tray & clear cover with 2 SM-12 splice modules, tie-wraps, instructions 2 BS 24 Yes EB063E-000 FOSC-ACC-A-TRAY-24-SMV60 Tray & clear cover with 2 SM-12 splice modules, 25 60MM SMOUV 2 splice protection sleeves, tie-wraps, instructions B 12 No 898849-000 FOSC-ACC-B-TRAY-12 Tray & clear cover with 2 SM-6 splice modules, tie-wraps, instructions 2 B 12 Yes G68315-000 FOSC-ACC-B-TRAY-12-SMV60 Tray & clear cover with 2 SM-6 splice modules,12 60MM SMOUV splice protection sleeves, tie-wraps, instructions B 24* No 863927-000 FOSC-ACC-B-TRAY-24 Tray & clear cover with 2 SM-12 splice modules tie-wraps, instructions 2 B 24 Yes Z75279-000 FOSC-ACC-B-TRAY-24-SMV60 Tray & clear cover with 2 SM-12 splice modules, 25 60MM SMOUV 2 splice protection sleeves, tie-wraps, instructions C 12 No RH0198-000 FOSC-ACC-C-TRAY-12 Tray & clear cover with 2 SM-6 splice modules, tie-wraps, instructions 2 C 12 Yes X35373-000 FOSC-ACC-C-TRAY-12-SMV60 Tray & clear cover with 2 SM-6 splice modules, 12 60MM SMOUV 2 splice protection sleeves, tie-wraps, instructions C 24* No RH0202-000 FOSC-ACC-C-TRAY-24 Tray & clear cover with 2 SM-12 splice modules, tie-wraps, instructions 2 C 24 Yes C4388W-000 FOSC-ACC-C-TRAY-24-SMV60 Tray & clear cover with 2 SM-12 splice modules, 25 60MM SMOUV 2 splice protection sleeves, tie-wraps, instructions D 00 No 122131-000 FOSC-ACC-D-TRAY-00 Tray & clear cover, no splice modules. Includes tie-wraps, instructions. 2 D 36 No 426579-000 FOSC-ACC-D-TRAY-36 Tray & clear cover with 6 SM-6 splice modules, tie-wraps, instructions 2 D 36 Yes DK696L-000 FOSC-ACC-D-TRAY-36-SMV60 Tray & clear cover with 6 SM-6 splice modules, 40 60MM SMOUV 2 splice protection sleeves, tie-wraps, instructions D 48 No 579575-000 FOSC-ACC-D-TRAY-48 Tray & clear cover with 6 SM-8 splice modules, tie-wraps, instructions 2 D 72* No 915167-000 FOSC-ACC-D-TRAY-72 Tray & clear cover with 6 SM-12 splice modules, tie-wraps, instructions 2 D 72 Yes JL0937-000 FOSC-ACC-D-TRAY-72-SMV60 Tray & clear cover with 6 SM-12 splice modules, 75 60MM SMOUV 2 splice protection sleeves, tie-wraps, instructions D 96 Yes F10669-000 FOSC-ACC-D-TRAY-96-S60 Tray & clear cover with 8 FIST style splice modules, 100 60MM 2 SMOUV splice protection sleeves, tie-wraps, instructions* Tyco Electronics SMOUV splice sleeves highly recommended for use with these trays.
Splice Tray Accessories• Variety of splice trays, capacities, options• Single and Ribbon fi ber styles
Fits Tray Kits/ Closure Capacity Part Number Description Kit Includes Pkg.
Ribbon Fiber Trays A or B 144 Mass Fusion 709972-000 FOSC-ACC-A/B-TRAY-12-RBN A/B Size Ribbon Tray with clear cover, 1 (12 fi ber ribbon x 12 splices) 2 SM-6 splice modules, tie-wraps, instructions
C 216 Mass Fusion 398955-000 FOSC-ACC-C-TRAY-RIBN-18 C Size Ribbon Tray with clear cover, 3 SM-6 1 (12 fi ber ribbon x 18 splices) splice modules, tie-wraps, instructions
D 288 Mass Fusion 061064-000 FOSC-ACC-D-TRAY-RIBN-24 D Size Ribbon Tray with clear cover, 4 SM-6 1 (12 fi ber ribbon x 24 splices) splice modules, tie-wraps, instructions
Patch Trays B 16 fi ber A38455-000 FOSC-ACC-B-TRAY-P-16-0 B-size Patch Tray with adapter retainer. 1 patch tray Holds up to 16 SC style adapters.
D 16 fi ber C03247-000 FOSC-ACC-D-TRAY-P-16-0 D-size Patch Tray with adapter retainer. 1 patch tray Holds up to 16 SC style adapters.
D 12 fi ber P5387P-000 FOSC-ACC-D-TRAY-P-12-0 D-size Patch Tray, adapter retainer, 2 patch tray no adapters installed
D 12 fi ber C91240-000 FOSC-ACC-D-TRAY-P-SC/APC D-size Patch Tray, adapter retainer, 2 patch tray and 12 SC/APC style adapters
D 12 fi ber E90832-000 FOSC-ACC-D-TRAY-P-SC/UPC D-size Patch Tray, adapter retainer, 2 patch tray and 12 SC/UPC style adapters.
Splice Tray Covers A or BS 90887R-000 FOSC-ACC-A-TRAY-COVER 1 clear A-size tray cover 25
B Y66598-000 FOSC-ACC-B-TRAY-COVER 1 clear B-size tray cover 25
C YD926E-000 FOSC-ACC-C-TRAY-COVER 1 clear C-size tray cover 25
D ZP0533-000 FOSC-ACC-D-TRAY-COVER 1 clear D-size tray cover 25
Splice Modules (for replacing or adding modules to trays) All 581981-000 FOSC-ACC-SM6-MODULES 6-splice capacity snap-in module 48
All 332341-000 FOSC-ACC-SM8-MODULES 8-splice capacity snap-in module 48
All 275897-000 FOSC-ACC-SM12-MODULES** 12-splice capacity snap-in module 48
All B86578-000 FOSC-ACC-SPLCEHLDR12-SMV 12-splice capacity (high density) snap-in module 100
*Splice tray dimensional information can be found in the Engineering Section.**Tyco Electronics SMOUV splice sleeves are highly recommended for use with these trays/modules.
Kits/ Fiber Type Part Number Description Sleeve Information Pkg
SMOUV Fusion Splice Protection SleevesSingle Fiber 693979-000 SMOUV-1120-01-US Heat-shrinkable, 60mm, single fi ber splice protection sleeve 100
Single Fiber 143339-000 SMOUV-1120-02-US Heat-shrinkable, 45mm, single fi ber splice protection sleeve 100
Ribbon Fiber 888498-000 SMOUV-1120-R2/12-US Heat-shrinkable, 42mm, 12 fi ber ribbon splice protection sleeve 50
A/B Ribbon Tray Kit Individual Splice Modules D-12 Patch Tray D-16 Patch Tray
SMOUV splice protection sleeves
• Single and Ribbon fi ber
Fiber Management and Routing Accessories
Slack Basket Accessories
Grounding Accessories
Closure Kits per Sizes Basket Style Part Number Description Pkg. A Standard E14672-000 FOSC-ACC-A8/450A-BASKET 1 Tall A91433-000 FOSC-ACC-450A4-BASKET-T 1 BS Standard 457507-000 FOSC-ACC-B-BASKET 1 Tall F53958-000 FOSC-ACC-B-BASKET-TALL 1 B Standard 457507-000 FOSC-ACC-B-BASKET 1 Tall F53958-000 FOSC-ACC-B-BASKET-TALL 1 C Standard RH0199-000 FOSC-ACC-C-BASKET 1 Tall RH0200-000 FOSC-ACC-C-BASKET-TALL 1 D Standard 089279-000 FOSC-ACC-D-BASKET 1 Tall 056395-000 FOSC-ACC-D-BASKET-TALL 1Note: Tall style slack storage baskets provide increased slack storage over standard baskets, but may reduce the
closure's splice tray capacity!
Slack Baskets-For converting no-basket kits to basket versions, or for changing basket size
089279-000
Closure Sizes Tubing Style Part Number Description Kit Includes Std. Pack All Transportation 526767-000 FOSC-ACC-TTUBE-SMLL-16IN Six 16 inch pieces 240 All Transportation 829333-000 FOSC-ACC-TTUBE-SMLL-50FT One 50 foot section 10 All Transportation 118317-000 FOSC-ACC-TTUBE-LRGE-16IN Six 16 inch pieces 240 All Transportation 646311-000 FOSC-ACC-TTUBE-LRGE-50FT One 50 foot section 10 All Transportation 577809-000 FOSC-ACC-TTUBE-RBN12-16I Six 16 inch pieces 240 All Transportation 226809-000 FOSC-ACC-TTUBE-RBN12-50 One 50 foot section 10 All Transportation F2103R-000 FOSC-ACC-TTUBE-RBN-16I Six 16 inch pieces 240 All Transportation 57581K-000 FOSC-ACC-TTUBE-RIBN24-50 One 50 foot section 10 All Buffer Tube Wrap RH0073-000 FOSC-ACC-LBTWRAP-100 One wrap 100 All Spiral 234855-000 FOSC-ACC-SPRLTUBE-1/8 One 500 foot roll 1 All Spiral 469031-000 FOSC-ACC-SPRLTUBE-3/16 One 200 foot roll 1 All Spiral RH0090-000 FOSC-ACC-SPRLTBE-3/16-25 One 25 foot section 1 All Spiral 460490-000 FOSC-ACC-SPRLTBE-3/8-50 One 50 foot section 1
118317-000
829333-000
• Various styles for regular or increased slack storage
Part Kits per Number Description Kit Includes Pkg. A33560-000 FOSC-ACC-450-FIBRGRD-KIT Groundwire and associated hardware to add 1 ground to any 5 FOSC 450 closure 449105-000 FOSC-ACC-MULT-EXT-GRND-3 Groundwire and associated hardware to add up to 3 grounds to 5 any FOSC 450 closure* 671575-000 FOSC-ACC-MULT-EXT-GRND-6 Groundwire and associated hardware to add 6 grounds to any 5 FOSC 450 closure* A11796-000 FOSC-ACC-450-COM-GRD-A Groundwires (alligator clip one end, eyelet on other) and bonding 5 braid to bond up to 6 cables together D46439-000 FOSC-ACC-450-COM-GRD-B Groundwires (eyelets on each end ...for use with B-Bonds) and 5 bonding braid to bond up to 6 cables together 92733M-000 FOSC-ACC-RUS-B-BONDS RUS-listed B Bonds 100
* Grounds are placed through one of the cable ports.
• Variety of mounting hardware options
Closure Mounting Hardware Accessories
*Snaplock is a trademark of Epicor Industries, Inc.
Fits 450 Closures Std. A BS B C D Part Number Description Pack Kit Includes
Aerial • • • • • 360889-000 FOSC-ACC-LASHING-STRAPS 10 2 metallic lashing straps, 2 nylon lashing straps,
4 cable spacers • • • • • 663259-000 FOSC-ACC-AERIAL-CLAMPS 10 2 hanger brackets and clamps, 2 Snaplock clamps,
2 lashing straps • • • • • 124063-000 FOSC-ACC-LASH-CBL-SUPORT 1 Lashing strap • • • • • 340883-000 FOSC-ACC-UNIV-AER-CL-NO6 5 2 hanger brackets and clamps, 2 lashing straps,
ground wire • • • • • A13909-000 FOSC-ACC-450-AERIAL-CLMP 10 1 dome mounting bracket, 1 base mounting bracket,
2 Snaplock clamps, associated hardware • • • • • 1B376P-000 FOSC-ACC-ADSSBRKT-400450 1 1 set of ADSS hanger clamps, cable protection wrap • • • • • C85442-000 FOSC-ACC-SNAPLOCK-CLAMPS 100 1 Snaplock clamp
Pedestal • • • • • F29601-000 FOSC-ACC-PED-BRKT-UNIV 10 Universal pedestal bracket, Snaplock clamp,
associated hardware
Pole or Wall • • • • • C82508-000 FOSC-ACC-WALL/POLE-MOUNT 1 2 mounting brackets, 2 Snaplock clamps, 4 lag bolts • • • • • D80858-000 FOSC-ACC-WALL-PMT-BRKT 1 2 mounting brackets, 4 Snaplock clamps, 4 lag bolts • D91837-000 FOSC-ACC-MTGBKT-450-B6PL 1 Custom bracket components and hardware for mounting
FOSC 450 B6 closure to pole • 919435-000 FOSC-ACC-D-POLE-MOUNT 1 Custom bracket and hardware for mounting FOSC 450 D6 closure to
pole.
360889-000 663259-000 124063-000 340883-000
A13909-000 F29601-000 C82508-000
D80858-000 D91837-000 919435-000
1B376P-000
Tray Type 1 - FOSC-A-TRAY-24, splice modules in the middle of the tray 2 - FOSC-B-TRAY-24, splice modules in the middle of the tray 3 - FOSC-D-TRAY-72, splice modules in the middle of the tray 4 - FOSC-A-TRAY-S24, splices near the edges of the tray 5 - FOSC-B-TRAY-S24, - splices near the edges of the tray 6 - FOSC-A-TRAY-24, “black box” concept*
Splitter TypeA - Splitter grade A (fused biconical tapered)P - Splitter grade P (standard planar technology)O - Splitter grade O (low loss planar technology)
Number of Integrated Splitters
Number of Inputs per Splitter1 - 1x...splitter2 - 2x...splitter
FOSC OC - X X X X X - XX
FOSC OC Splitter
Split Ratio 00 - Symmetrical05 - 5/9510 - 10/9015 - 15/8520 - 20/8025 - 25/7530 - 30/7035 - 35/65 40 - 40/6045 - 45/55Note: All split ratios are only available for 1x2 and 2x2 splitters.
Number of Outputs per Splitter2 - ...x 2 splitter 3 - ...x 3 splitter 4 - ...x 4 splitter6 - ...x 6 splitter8 - ...x 8 splitterA - ...x10 splitterC - ...x12 splitterG - ...x16 splitterW - ...x32 splitter
Field-Installable Splitter
* Standard fi ber length = 2.5 + -0.5m at each side (non-connectorized)
Coupler
Coupler TypeDual window wideband
Planar TypeA - FBTP - PlanarO - Low loss planar
Number of Inputs per Splitter1 - 1x ... splitter2 - 2x ... splitter
Number of Outputs per Splitter04 - ... x4 splitter08 - ... x8 splitter16 - ... x16 splitter32 - ... x32 splitter64 - ... x64 splitter
OCC 1 X - X XX XX - XX XX XX X
PackagingF - Field installable holder*
Output Cable TypeNQ - 250 micron single fi ber type
Input Cable TypeNQ - 250 micron
Connector TypeNN - None
Split Ratio00 - Symmetrical
* FOSC-A-Tray-24 fi ts A or B size closures.
Passives - Splitters
Tray Tray OC Splitter Kits Std. Type** Capacity Splitter Type Part Number Description Detailed Description Pkg.
A 24* Grade A-Fused Biconical Tapered CA2118-000 FOSC-OC-1A11200 1 - 1x2 splitter, symmetrical split ratio 1 A 24* Grade A-Fused Biconical Tapered CC6221-000 FOSC-OC-1A11235 1 - 1x2 splitter, 35/65 symmetrical split ratio 1 A 24* Grade A-Fused Biconical Tapered 133450-000 FOSC-OC-1A11400 1 - 1x4 splitter, symmetrical split ratio 1 A 24* Grade A-Fused Biconical Tapered D30790-000 FOSC-OC-1A21400 2 - 1x4 splitter, symmetrical split ratio 1
B 24* Grade A-Fused Biconical Tapered C79887-000 FOSC-OC-2A11200 1 - 1x2 splitter, symmetrical split ratio 1 B 24* Grade A-Fused Biconical Tapered 768084-000 FOSC-OC-2A11400 1 - 1x4 splitter, symmetrical split ratio 1 B 24* Grade A-Fused Biconical Tapered 861456-000 FOSC-OC-2A11800 1 - 1x8 splitter, symmetrical split ratio 1
D 24* Grade A-Fused Biconical Tapered C75768-000 FOSC-OC-3A11200 1 - 1x2 splitter, symmetrical split ratio 1 D 72* Grade A-Fused Biconical Tapered C70179-000 FOSC-OC-3A11400 1 - 1x4 splitter, symmetrical split ratio 1 D 72* Grade A-Fused Biconical Tapered 329536-000 FOSC-OC-3A11800 1 - 1x8 splitter, symmetrical split ratio 1 D 72* Grade A-Fused Biconical Tapered A69314-000 FOSC-OC-3A21400 2 - 1x4 splitter, symmetrical split ratio 1 D 72* Grade A-Fused Biconical Tapered A61669-000 FOSC-OC-3A21800 2 - 1x8 splitter, symmetrical split ratio 1 D 72* Group P-Standard Planar Technology CB9820-000 FOSC-OC-3P11400 1 - 1x4 splitter, symmetrical split ratio 1 D 72* Group P-Standard Planar Technology E49835-000 FOSC-OC-3P11800 1 - 1x8 splitter, symmetrical split ratio 1 D 72* Group P-Standard Planar Technology D39890-000 FOSC-OC-3P11G00 1 - 1x16 splitter, symmetrical split ratio 1 D 72* Group P-Standard Planar Technology F58883-000 FOSC-OC-3P11W00 1 - 1x32 splitter, symmetrical split ratio 1 D 72* Group P-Standard Planar Technology CB4800-000 FOSC-OC-3P21800 2 - 1x8 splitter, symmetrical split ratio 1 D 72* Group P-Standard Planar Technology C73000-000 FOSC-OC-3P21G00 2 - 1x16 splitter, symmetrical split ratio 1
A or B “Black Box” Grade A-Fused Biconical Tapered E45575-000 FOSC-OC-6A11200 1 - 1x2 splitter, symmetrical split ratio 1 A or B “Black Box” Grade A-Fused Biconical Tapered C74415-000 FOSC-OC-6A11400 1 - 1x4 splitter, symmetrical split ratio 1 A or B “Black Box” Grade A-Fused Biconical Tapered F54686-000 FOSC-OC-6A11800 1 - 1x8 splitter, symmetrical split ratio 1 A or B “Black Box” Grade A-Fused Biconical Tapered A10948-000 FOSC-OC-6A21400 2 - 1x4 splitter, symmetrical split ratio 1 A or B “Black Box” Grade A-Fused Biconical Tapered E42433-000 FOSC-OC-6A21800 2 - 1x8 splitter, symmetrical split ratio 1 A or B “Black Box” Grade A-Fused Biconical Tapered C74674-000 FOSC-OC-6A51200 1 - 5x2 splitter, symmetrical split ratio 1 A or B “Black Box” Grade P-Fused Planar Tapered D39498-000 FOSC-OC-6P11G00 1 - 1x16 splitter, symmetrical split ratio 1 A or B “Black Box” Grade P-Fused Planar Tapered C75701-000 FOSC-OC-6P12G00 1 - 2x16 splitter, symmetrical split ratio 1
Grade A-Fused Biconical Tapered CC9545-000 OCC1A-10400-NNNQNQF 1 - 1x4 FBT 1 Grade P-Fused Planar Tapered CC8542-000 OCC1P-10800-NNNQNQF 1 - 1x8 planar 1 Grade P-Fused Planar Tapered CC8544-000 OCC1P-11600-NNNQNQF 1 - 1x16 planar 1 Grade P-Fused Planar Tapered CC8312-000 OCC1P-13200-NNNQNQF 1 - 1x32 planar 1 Grade P-Fused Planar Tapered CC8313-000 OCC1P-16400-NNNQNQF 1 - 1x64 planar 1
*Tyco Electronics SMOUV splice sleeves highly recommended for use with these trays/modules.** A trays fi t A or B-size closures.
Trays with Single-mode Wideband Couplers/Splitters
FOSC OC Splitter
Field-installable Splitter
FOSC OC CWDM
Tray Type 3 - FOSC-D-TRAY-72, splice modules in the middle of the tray 6 - FOSC-A-TRAY-24, “black box” concept 7 - 2 unit high FOSC-D tray with 12 connector patchpanel 8 - 1 unit high FOSC- tray with 6 connector patchpanel10 - 2 unit high FOSC-D tray with splice modules11 - 2 unit high FOSC-A tray "black box" concept*
Coarse WDM components
Number of Channels12 4 8 A - 4 channels + upgrade portB - 8 channels + upgrade portC - 4 channels + upgrade + 1310 nm portD - 8 channels + upgrade + 1310 nm portE - 4 channels + 1310 nm portF - 8 channels + 1310 nm portG - 10 channels + 1310 nm portH - 2 channels + upgrade I - 2 channels + upgrade + 1310 nm portJ - 5 channels + upgrade + 1310 nm port K - 5 channels + upgradeL - 3 channels + upgradeN - 10 channelsO - 18 channelsP - 10 channels + 1310 (cwdm)
FOSC OC - XC XX XX X XX
Connector typeNN - Not applicable Connector typeMin. return loss SC FC E2000 LC MU50 db (UPC)* S1 F1 L1 U160 db (APC 8º)** S2 F2 E9 L260 db (APC 9º)** S3*UPC Ultra polished physical contact**APC Angled polished physical contact
Channel Spacing/Sequence1 - 20 nm e.g. 1270,1290, 1310, ...2 - 40 nm e.g. 1270, 1310, 1350, ...0 - one channel only
Starting Wavelength27 - 1270 nm29 - 1290 nm
61 - 1610 nm
TypeM - MultiplexingD - DemultiplexingX - Double demux (for 2 fi ber system)Y - Double mux (for 2 fi ber system)
* FOSC-A-Tray fi ts A or B size closures.
Connectorized SimplexCable Type
Number of Channels 1 - Single channel add or drop X - Double (de)mux (single channel add and drop on 2-fi ber system)2 - Two channel double (de)mux (2-channel add and drop on 2-fi ber system)
Starting Wavelength27 - 1271 nm29 - 1291 nm
61 - 1611 nm
OCC1 C - X - XX X - XX XX F
Field-Installable CWDM
In-Output Cable Type NQ - 250 micron single fi ber
Connector Type at End 1NN - None
Channel Spacing/Sequence0 - One channel only1 - 20nm e.g. 1470, 1490
1 - nm
Passives - CWDMs
Tray Tray Number of Upgrade FOSC-OC-XC-CWDMs Type** Capacity Channels Port 1310 Part Number Description Detailed Description
A “Black Box” 1 A12093-000 FOSC-OC-6C1X470NN Double Demux 1470nm A “Black Box” 1 D81777-000 FOSC-OC-6C1X490NN Double Demux 1490nm A “Black Box” 1 A68278-000 FOSC-OC-6C1X530NN Double Demux 1530nm A “Black Box” 1 F06637-000 FOSC-OC-6C1X550NN Double Demux 1550nm A “Black Box” 1 C23974-000 FOSC-OC-6C1X570NN Double Demux 1570nm A “Black Box” 1 D86266-000 FOSC-OC-6C1X590NN Double Demux 1590nm A “Black Box” 1 D33963-000 FOSC-OC-6C1X610NN Double Demux 1610nm A “Black Box” 2 D31817-000 FOSC-OC-6C2D471NN Demux 1470-1490nm A “Black Box” 2 D81979-000 FOSC-OC-6C2D511NN Demux 1510-1530nm A “Black Box” 2 C73118-000 FOSC-OC-6C2D551NN Demux 1550-1570nm A “Black Box” 2 E48928-000 FOSC-OC-6C2D591NN Demux 1590-1610nm A “Black Box” 2 x CB1790-000 FOSC-OC-6CHD511NN Demux 1510-1530nm A “Black Box” 2 x CA9070-000 FOSC-OC-6CHD551NN Demux 1550-1570nm A “Black Box” 2 x CA9071-000 FOSC-OC-6CHD591NN Demux 1590-1610nm A “Black Box” 2 x CC4287-000 FOSC-OC-6CHX471NN Double Demux 1470-1490nm A “Black Box” 2 x CC4288-000 FOSC-OC-6CHX511NN Double Demux 1510-1530nm A “Black Box” 2 x CC4289-000 FOSC-OC-6CHX551NN Double Demux 1550-1570nm A “Black Box” 2 x CC4290-000 FOSC-OC-6CHX591NN Double Demux 1590-1610nm A “Black Box” 4 CA6103-000 FOSC-OC-6C4D551NN Demux 1550-1610nm A “Black Box” 4 x CB1808-000 FOSC-OC-6CAD471NN Demux 1470-1530nm A “Black Box” 4 x CB1799-000 FOSC-OC-6CAD551NN Demux 1550-1610nm A “Black Box” 4 x CA6417-000 FOSC-OC-6CAM511NN Mux 1510-1570nm A “Black Box” 4 x CC3378-000 FOSC-OC-6CAX551NN Double Demux 1550-1610nm A “Black Box” 4 x CB6702-000 FOSC-OC-6CAY471NN Double Mux 1470-1530nm A “Black Box” 5 C27830-000 FOSC-OC-6C5D431NN Demux 1430-1510nm A “Black Box” 8 CA6420-000 FOSC-OC-6C8D471NN Demux 1470-1610nm A “Black Box” 8 x CC3676-000 FOSC-OC-6CBD471NN Demux 1470-1610nm
D 72* 1 CC2323-000 FOSC-OC-3C1X470NN Double Demux 1470nm D 72* 3 CC7395-000 FOSC-OC-3C3R471NN Add/Drop Redundant 1470-1530nm D 72* 5 A67037-000 FOSC-OC-3C5X431NN Double Demux 1430-1510nm D 72* 4 x CC6143-000 FOSC-OC-3CAD551NN Demux 1550-1610nm D 72* 8 x CC6140-000 FOSC-OC-3CBD471NN Demux 1470-1610nm D 72* 4 x x E99683-000 FOSC-OC-3CCX471NN Double Demux 1470-1530nm D 72* 8 x E98266-000 FOSC-OC-3CFD471NN Demux 1470-1610nm D 6 connectors 1 E46843-000 FOSC-OC-8C1X471S2 Double Demux 1470nm SC/APC D 6 connectors 1 E47122--000 FOSC-OC-8C1X611S2 Double Demux 1610nm SC/APC
1 CP5771-000 OCC1C-X-430-NNNQF-US26 1 Ch Double Demux 1431 nm 1 CP5772-000 OCC1C-X-450-NNNQF-US26 1 Ch Double Demux 1451 nm 1 CP5773-000 OCC1C-X-470-NNNQF-US26 1 Ch Double Demux 1471 nm 1 CP5774-000 OCC1C-X-490-NNNQF-US26 1 Ch Double Demux 1491 nm 1 CP5775-000 OCC1C-X-510-NNNQF-US26 1 Ch Double Demux 1511 nm 1 CP5776-000 OCC1C-X-530-NNNQF-US26 1 Ch Double Demux 1531 nm 1 CP5777-000 OCC1C-X-550-NNNQF-US26 1 Ch Double Demux 1551 nm 1 CP5779-000 OCC1C-X-570-NNNQF-US26 1 Ch Double Demux 1571 nm 1 CP5780-000 OCC1C-X-590-NNNQF-US26 1 Ch Double Demux 1591 nm 1 CP5781-000 OCC1C-X-610-NNNQF-US26 1 Ch Double Demux 1611 nm 2 CP9377-000 OCC1C-2-X471-NNNQF-US26 2 Ch Double Demux 1471 - 1491 nm 2 CP9378-000 OCC1C-2-X511-NNNQF-US26 2 Ch Double Demux 1511 - 1531 nm 2 CP9379-000 OCC1C-2-X551-NNNQF-US26 2 Ch Double Demux 1551 - 1571 nm 2 CP9380-000 OCC1C-2-X591-NNNQF-US26 2 Ch Double Demux 1591 - 1611 nm 2 CP9381-000 OCC1C-2-X31A-NNNQF-US26 2 Ch Double Demux 1310 - 1550 nm *Tyco Electronics SMOUV splice sleeves are highly recommended for use with these trays/modules. Note: One tray kit per package.** A trays fi t A or B-size closures.
Trays with Coarse Wavelength Division Multiplexing/DeMultiplex Components (CWDM)
Category Item Part Number Description Kit Includes
Workstand FOSC 450 Closure Workstand 941802-000 FOSC-ACC-450-WORKSTAND Clamp for holding FOSC 450 closure during splicing
Flame Retardant Flame Retardant Vault Bag 263245-000 FOSC-ACC-A/B-VAULT-BAG 1 flame retardant bag for FOSC 450 A, B or BS Coverings for A & B size closures (B Short) closure Flame Retardant Vault Bag for 766709-000 FOSC-ACC-D-VAULT-BAG 1 flame retardant bag for FOSC 450 C or D closure C & D size closures
Closure Upgrade Kit FOSC 450C to 450D Upgrade Kit 9J701X-000 FOSC-ACC-C-D-CONVRSION Kit to upgrade FOSC 450C closure 450D. Includes D size dome and 36 count splice tray (additional trays sold separately).
Closure Rehab Kit FOSC 450 C&D Split Base D80569-000 FOSC-450D-SPLTBASE-01 FOSC 450C and D version base separable into 2 halves. For rehabilitation of closures with wide splice trays into a FOSC 450 C or D closure. FOSC 450 D Rehab Kit RH0070-000 FOSC450-D6-REHAB-KIT Combination 450 D closure and Split Base
Label Cards Label Cards - Blue 119982-000 FOSC-ACC-ID-LBLCARD-BLUE Blue Label Cards with numbers F1-F24 & 1TO-8TO Label Cards - White 759952-000 FOSC-ACC-ID-LBLCARD-WHT White Label Cards with numbers D1-D24, 1-8 Label for A & B trays E34360-000 FOSC-ACC-DECAL-ID-ABTRAY Identification label for A&B trays
Slack Storage Loose Buffer Tube Storage 769441-000 FOSC-ACC-LBT-SOCK Loose buffer tube storage sock for 450A, B and BS Sock Sock for A, BS, B closures closures. Loose Buffer Tube Storage 019008-000 FOSC400-D-SOCK Loose buffer tube storage sock for 450 C & D Sock for C & D closures closures.
Wraps Loose Buffer Tube Wrap RH0073-000 FOSC-ACC-LBT-WRAP-100 Multi-functional adhesive backed wrap primarily for placement onto loose buffer tubes as they enter a splice tray. Multi-Drop Wrap RH0126-000 FOSC-ACC-MD-WRAP-25 Multi-functional adhesive backed wrap primarily for placement onto drop cables to be placed under the cable retention clamp hardware. Shield Continuity Shield Continuity Clamp 9V219F-000 FOSC-ACC-SHIELDCONTCLMP
Splice Tray Ribbon Fiber Termination Module D7512P-000 FOSC-ACC-RIBBON-TERM-MOD Specially designed holder for attaching un-tubedAccessories ribbons onto a splice tray D Basket Ribbon Router 525147-000 FOSC-ACC-D-RIBBON-ROUTER Device for separating ribbons routing to different splice trays FOSC Tray Hold-down tabs D77919-000 FOSC-ACC-TRAY-HOLD-TABS Tray tabs for A & B splice trays FOSC Tray tie-wraps L5904R-000 FOSC-ACC-TRAY-TY-RAPS Tie-wraps for splice trays Tray Backbone Tray Backbone F47112-000 FOSC-ACC-D-BACKBONE Bracket for holding trays in position when no slack basket is present
Straps to FOSC Tray Velcro Strap - Black L48638-000 FOSC-ACC-VELCROSTRAP-16 Strap for securing trays in FOSC 450 A, BS closuresSecure Trays FOSC Tray Velcro Strap - Red 66994Z-000 FOSC-ACC-VELCROSTRAP-25 Strap for securing trays in FOSC 450 B, C and D closures
Strength Member Large Strength Member Bracket 135731-000 FOSC-ACC-STRMEM-BRKT-LG Large size strength member bracketBracket
Specialty Tools Buffer Tube Stripper Tool 250960-000 FACC-AXIAL-STRIPPER-RC1 Raucut1 tooling to open cut or uncut (midspan) buffer tubes. Kit includes inserts for tubes 1.8 mm to 4.2 mm diameter.
Miscellaneous Accessories
Additional FOSC Fiber Optic Splice Closures
FOSC 450 fi ber optic splice closures is just one of several families of FOSC closures that connect, protect and seal the fi ber optic network.
The information that follows describes some of the other closure families and products available for your fi ber network from Tyco Electronics.
FOSC 250 ClosureThe FOSC 250 splice closure sets a new standard in installation effi ciency for Fiber-to-the-Home applications. Specifi cally designed for more effi cient termination of drop or terminal cables to the distribution cable, the FOSC 250 splice closure utilizes an integrated splice tray, slack basket, and compressed gel sealed base that simplifi es training and installation while reducing loose or unused closure parts, deployment times, installation errors, and overall installation costs.
FOSC 400 ClosuresSimilar to the 450 family, this is a family of single ended (butt) style fi ber optic splice closures utilizing heat shrink cable sealing rather than gel. Other features include a removable dome, hinging splice trays and a range of sizes and styles to choose from.
FOSC 400 Flame Retardant ClosuresFlame retardant versions of the FOSC 400 B and 400 D closures.
FOSC 500 ClosuresThe smallest of the FOSC closure family, the 500 uses gel sealing and can be confi gured for butt or inline splicing. Slack storage is limited to bare fi bers, and has a twenty-four single splice capacity.
FOSC 600 ClosuresThe largest of the FOSC closure family, 600 fi ber optic splice closures are a great fi t for applications such as large cable splicing in the network backbone, consolidating a large number of cables and splices, or rehabilitating failed closures.
FOSC Closure Family
FOSC 350 ClosureThe new FOSC 350 in-line gel sealed fi ber splice closure holds up to 96 single splices (196 for 12-fi ber ribbons). This two-halved, re-enterable and re-useable closure incorporates four cable entry ports, hinging splice trays, and toolless perimeter latches. Accessory kits are available for bringing multiple cables through a single cable port.
AIR FOSC ClosuresThese free breathing closures are de-signed for aerial applications and provide either taut sheath or inline (with slack) splicing. The rodent resistant body and FOSC splice trays provide an effi cient closure to connect, protect and distribute fi ber and fi ber cables.
Gator 12F Gel Splice ClosureTyco Electronics introduces a small splice closure designed for splicing two fl at drop style cables.• Small enough to fi t into “fl ower pot” size
hand holes• Accommodates up to 12 single fi bers,
12 ribbonized fi bers, or one 12 fi ber ribbon
For additional information, contact your
local area sales representative or visit
our web site: www.us.telecomosp.com
Engineering Information
In the following section you will fi nd dimensional and assembly information and drawings related to FOSC 450 fi ber optic splice closures and accessories. Additional information is available upon request.
Drawing Key1. Dome 2. Clamp3. Base4. Trigger
Closure Size (Dimensions in inches) A BS B6 C6 D6Total closure length, excluding trigger 19 19 24 23 30Closure outer diameter, including clamp 8 9.2 9.8 11.5 11.5NOTE: Diameters excluding clamp are approximately 2 inches less.
Cable port dimensions (Dimensions in inches)Number round cable ports 4 6 6 6 6 Cable diameter range .30 -.87 .35-1 .35-1 .35-1 .35-1 (2X) .39 -1.10 (2X)
4
3
L
21
D
LD
450 A 450 BS, B6, C6, D6
Closure Dimensions
Gel-Block Profi les
FOSC 450 Closure Family Assembly Drawings
450 AShown with 2 standard splice trays and tall version slack basket
450 BS (B Short)Shown with 6 standard splice trays and standard version slack basket
450 BShown with 6 standard splice trays and standard version slack basket
450 C/DD size shown with 6 standard splice trays and standard version slack basketNote: FOSC 450 C closure is not shown, but will replicate the D size with the exception of shorter trays, basket, and dome.
Note: The drawings are not to scale
Splice Tray Dimensions
Tray Fiber Capacity Nominal Tray Dimensions Fits FOSC Closure Size Versions Available (inches, hinge not included) Tray Sizes 400 450 500 600 AIR FOSC Single Mass L x W x H A A4, A8 A4, BS N/A N/A A 12, 24 72* 91/8 x 37/8 x 7/16
B B2, B4 B6 N/A N/A B 12, 24 72* 12 x 37/8 x 7/16
C C5 C6 N/A N/A N/A 12, 24 144* 71/2 x 57/8 x 7/16
D D5 D6 N/A C or D N/A 36, 72, 96 288* 15 x 57/8 x 7/16
A/B Ribbon A4, A8, B2, B4 A4, BS, B6 N/A N/A A & B N/A 144 91/8 x 37/8 x 1 C Ribbon C5 C6 N/A N/A N/A N/A 216 71/2 x 57/8 x 1 D Ribbon D5 D6 N/A C or D N/A N/A 288 15 x 57/8 x 1
* When performing mass fusion splicing on these trays, ribbon slack must be stored on a separate tray or slack basket.
FO
SC
Fib
er
Op
tic S
plice
Clo
sure
sQ
UIC
K R
EF
ER
EN
CE
GU
IDE
Clo
sure
FO
SC 4
00
FO
SC 4
50
FO
SC 5
00
F
OSC
600
A
IR F
OSC
Type
/Siz
e D
5 C
5 B
2
B4
A4
A
8 D
6 C
6 B
6 B
S A
4 A
A D
C
A
/ BCl
osur
e Size
1 (inch
es)
11.5
dia. 3
1 L
11.5
dia. 2
3 L
8 dia.
25 L
8 dia.
19.5
L 11
.5 dia
. 30 L
11
.5 dia
. 23 L
9.8
dia.
24 L
9.2 di
a. 19
L 8 d
ia. 19
L 19
Lx2.5
x5
33 Lx
10x1
1 33
Lx6x
11
29.5/
37 Lx
6x5
Appr
ox. C
losu
re W
eight
s (lbs
) 16
12
8
6
20
16
13
10
6
5 31
30
22
/15
Clos
ure C
apac
ity
End-
to-E
nd S
ingle
Splic
e (SM
6 Mod
ules)
288
96
48
24
48
28
8 96
72
72
48
24
2 32
4 18
0 48
Sing
le Sp
lice (
SM12
Mod
ules)12
57
6 19
2
96
48
96
576
192
144
144
96
242
648 /
8642
360 /
4802
96 M
ass F
usion
Spli
ce
1152
86
4
144
n/a
144
1152
86
4 28
8 14
4 14
4 n/a
17
28
864
288
Mid-
Shea
th S
ingle
Splic
e 43
2 19
2
96
48
96
576
192
144
144
72
24
864
480
96 M
ass F
usion
Spli
ce
864
432
14
4
n/a
14
4 86
4 43
2 28
8 28
8 21
6 n/a
17
28
864
288
Tray
s Per
Clo
sure
Stan
dard
Tray
s 84 / 6
5 / 56
84 / 65 / 5
6
44
25 4
4 /35 /26 84 / 6
5 / 56
84 / 65 / 5
6 64 / 6
5 / 46
64 / 65 / 2
6 44 / 3
5 / 26
1 9
5 4
Ribb
on Tr
ays
43,4/35 /26
44 /35 /26
25
15 2
4 /15 /16 43,4
/35 /26 44 /35 /26
34 /35 /26 34 /35 /16
24 /25 /16 n/a
53
313
n/a11
Sing
le Fi
ber S
plice
Ca
pacit
y per
Tra
y S
M6 M
odule
s 36
12
12
12
12
12
36
12
12
12
12
n/a
36
36
12
SM1
2 Mod
ules12
72
24
24
24
24
24
72
24
24
24
24
n/a
72
72
24
FIS
T Mo
dules
12
96
n/a
n/a
n/a
n/a
n/a
96
n/a
n/a
n/a
n/a
24
96
96
n/a
Patc
hing
Tra
y (qu
antity
/type
) Ye
s No
No
No
/No
No/N
o Ye
s No
Ye
s No
No
No
Ye
s Ye
s No
(1
2,16/s
c)
(1
2,16/s
c)
(12,1
6/sc)
(1
2,16/s
c) (1
2,16/s
c) B
aske
t (qu
antity
/type
) Ye
s No
Yes
Yes
Ye
s No
Ye
s Ye
s Ye
s No
No
No
No
(4
/all, 8
/sc)
(4
/all, 8
/sc)
(4/al
l, 8/sc
) (4
/all, 8
/sc)
(4
/all, 8
/sc)
(4/al
l, 8/sc
) (4
/all, 8
/sc)
Seali
ng S
yste
m
Clos
ure D
ome-
to-Ba
se or
“O
” Ring
/ “O
” Ring
/ “O
” Ring
/ “O
” Ring
/ “O
” Ring
/ “O
” Ring
/ “O
” Ring
/ “O
” Ring
/ “O
” Ring
/ Dr
y Gas
ket
Dry G
aske
t Dr
y Gas
ket
Brea
thable
T
op-to
-Bott
om
Clam
p Cl
amp
Clam
p
Clam
p
Clam
p Cl
amp
Clam
p Cl
amp
Clam
p
Cabl
e Cap
acity
Butt
(std.
/max
.) 7 /
129
7 / 12
9 4 /
89
6 / 10
9 69
10
9 6
/ 167 / 2
18 6
/ 167 / 2
18 6
/ 167 / 2
18 6
/ 167 / 2
18 4 /
107 / 1
38 2
8 / 16
7 / 208
8 / 16
7 / 208
n/a I
nline
(std.
/max
.) n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
4
12 / 2
07 / 248
12 / 2
07 / 248
up to
12
Fire
Ret
arda
nt
Yes
No10
Yes
No10
No10
No
10
No10
No
10
No10
No
No
No
No
Clos
ure A
vaila
ble
(400
-D5/F
R)
(4
00-D
5/FR)
Tool
s Req
uire
d CV
-198
1 Hot
CV-1
981 H
ot
CV-
1981
Hot
CV-1
981 H
ot Ca
n Wre
nch,
Can W
renc
h, Ca
n Wre
nch,
Snips
Ca
n Wre
nch
1/2" N
ut 1/2
" Nut
1/2" N
ut 1/2
" Nut
Ai
r Gun
, Pow
er
Air G
un, P
ower
Ai
r Gun
, Pow
er
Air G
un, P
ower
Sn
ips
Snips
Sn
ips
Sn
ips
Drive
r, Dr
iver,
Drive
r, Dr
iver
Scre
wdriv
er
Scre
wdriv
er
Scre
wdriv
er1 Cl
osur
e len
gth (“
L”) p
lus 10
X lar
gest
cable
diam
eter in
stalle
d equ
als th
e ove
rall l
ength
requ
ired f
or ha
ndho
le.
Maxim
um di
mens
ions i
nclud
es cl
amp a
nd ca
ble se
aling
. Diam
eter d
imen
sions
inclu
de cl
amp.
Diam
eters
witho
ut cla
mps a
re ap
prox
imate
ly 2 i
nche
s les
s.2 Tr
ays c
onfi g
ured
with
FIS
T styl
e spli
ce m
odule
s pro
vide 9
6 sing
le sp
lice c
apac
ity -
FOSC
400 D
5 and
450
D6 cl
osur
es ca
n also
acco
mmod
ate F
IST s
tyle m
odule
s (SM
OUV
splic
e pro
tectio
n slee
ves m
ust b
e use
d)3 Th
e ribb
on tra
y can
also
be co
nfi gu
red w
ith 12
SC
adap
ters f
or pa
tching
and p
rovid
e 12 s
ingle
splic
e cap
acity
.4 Fle
xible
sock
is us
ed fo
r LBT
stor
age.
5 With
stan
dard
bask
et.6 W
ith ta
ll bas
ket.
7 If usin
g the
3-ca
ble M
ulti-c
able
kit, 3
fl at o
r 3 ro
und c
ables
per p
ort if
cable
does
not e
xcee
d <0
.25” d
iamete
r8 If u
sing t
he 4-
cable
Mult
i-cab
le kit
s and
comb
ined c
ables
do no
t exc
eed 1
” diam
eter.
9 Multip
le ca
bles p
er po
rt ca
n be i
nstal
led (u
sing S
COP
or br
anch
-off c
lip) if
cable
diam
eters
do no
t ex
ceed
port
diame
ter.
10Fir
e Reta
rdan
t bag
or bl
anke
t opti
ons.
11Ri
bbon
/mas
s fus
ion ca
n be d
one b
ut sla
ck is
pulle
d bac
k into
the s
lack a
rea u
nder
the t
rays
.12
SMOU
V sp
lice p
rotec
tion s
leeve
s mus
t be u
sed.
13FO
SC 60
0 C cl
osur
e use
s “D”
size
splic
e tra
ys
GEL
CABL
E SE
ALIN
GHE
AT-S
HRIN
K CA
BLE
SEAL
ING
BRE
ATHA
BLE
Closure size (inches)
Number of cable ports for which
termination hardware is provided
Capacity (or type) of splice tray
Number of trays pre-installed
Closure size Num
ber of cable ports provided
Configuration Capacity (or type) of splice trays
FOSC 600 - X X X - XX - X - X X XAIR-FOSC - X - XXX - XX - X X X
Closure size
Style
Tray style
Number of trays
Grounding
Miscellaneous
FOSC 400 Closure
FOSC 450 Closure
Closure size (inches)
Cable entry ports (in addition tooval port which is included with each kit)
Capacity (or type) of splice tray
FOSC 400 - XX - XX - X - XXXFOSC 450 - XX - X - XX - X - XXX
Valve for flash test
Ground feed-through lugs
Slack Basket type
Valve for flash-test
Ground feed-through lugs Slack Basket type
Number of splice trays
Valve for flash test
Ground feed-through lugs
Cable blocking components
Number of splice trays
FOSC 600 Closure
AIR FOSC Closure Closure Splice Tray Guide
OR
DE
RIN
G IN
FO
RM
AT
ION
CLASS A FOSC Closures FOSC 400 FOSC400-A4-NT-0-NGV
C22578-000 FOSC400-A8-NT-0-NGV
F84540-000 FOSC400-B2-NT-0-NGV
755467-000 FOSC400-B4-NT-0-NGV
677893-000 FOSC400-C5-NT-0-NGV
L21886-000 FOSC400-D5-NT-0-NGV
430987-000 FOSC 450 FOSC450-A4-4-NT-0-A1V
A08617-000 FOSC450-BS-6-NT-0-B0V
F34112-000FOSC450-B6-6-NT-0-B3V
058514-000 FOSC450-C6-6-NT-0-C6V
JI945R-000 FOSC450-D6-6-NT-0-D6V
931866-000 FOSC 600 FOSC600-C8B-NT-0-C4V
531296-000 FOSC600-C8I-NT-0-C4V
A13992-000 FOSC600-D8B-NT-0-D4V
867502-000 FOSC600-D8I-NT-0-D4V
F90616-000
*NT indicates that no tray is factory installed in this closure.
CLASS B FOSC Closures(Contact Tyco Electronics Customer Service for complete list)
Includes all CLASS A confi gurations with 12, 24, and Ribbon trays (FOSC400, 450 A, B and C closures) or 36, 72 and Ribbon Trays (FOSC400, 450 D closures, FOSC600 Closures). Some sizes available with tall slack storage baskets.ex: FOSC400-D5-36-1-NGV
197697-000 ex: FOSC450-C6-4-12-1-C6V
Y53157-000 ex: FOSC600-D8B-R2-1-D4V
A37830-000 Includes non-grounded CLASS A confi gurations with 12, 24, and Ribbon trays (FOSC400, 450 A, B and C closures) or 36, 72 and Ribbon Trays (FOSC400, 450 D closures, FOSC600 Closures). Some sizes available with tall slack storage baskets.ex: FOSC400-B4-12-1-BNV
886337-000 ex: FOSC450-B6-4-24-1-B0V
776482-000 ex: FOSC600-C8B-36-1-C0V
7X2580-000
Includes RUS closure confi gurations.
Tray Fiber
Nominal Tray
Fits the following closure sizes:
Capacity
Dimensions
FOSC FOSC
FOSC FOSC
Tray Size Single
Mass (L x W
x H)* 400
450 500
600 AIR FOSC
FOSC A 12, 24
72 9 1/8 x 3 7/8 x 7/16
A4, A8 A4, BS
N/A N/A
AIR FOSC AFOSC B
12, 24 72
12 x 3 7/8 x 7/16 B2, B4
B6 N/A
N/A AIR FOSC B
FOSC C 12, 24
144 7 1/2 x 5 7/8 x 7/16
C5 C6
N/A N/A
N/AFOSC D
36, 72, 96 288 15 x 5 7/8 x 7/16
D5 D6
N/A C or D
N/AFOSC A/B Ribbon N/A
144 9 1/8 x 3 7/8 x 1
A4, A8, A4, BS,
N/A N/A
AIR FOSC A,
B2, B4
B6
AIR FOSC B
FOSC C Ribbon N/A
216 7 1/2 x 5 7/8 x 1
C5 C6
N/A N/A
N/AFOSC D Ribbon
N/A 288
15 x 5 7/8 x 1 D5
D6 N/A
C or D N/A
*inches, hinge not included
Splicing tray
Cable type
Ground feed-through lugs
Valve for flash test
FOSC-500AA- XXX - XX - X X
FOSC 500 Closure
Index
A
Accessories: 12Cable Termination: 13Closure Mounting Hardware
Aerial: 17 Pedestal: 17Pole: 17Wall: 17
Closure Sealing: 13Fiber Management: 16Fiber Routing: 16Miscellaneous: 23Patch Trays: 15Ribbon Fiber Trays: 15Splice Modules: 15Splice Tray: 14Splice Tray Covers: 15
AIR FOSC Closures: 25
B
Base: 7
C
Cable Retention Hardware: 7Class A List: 10Class B List: 10Class C List: 10
ClosureCapacities: 6Dimensions: 27FOSC 250: 25FOSC 400: 25Kit Contents: 7
Closure Dimensions: 27Closure Mounting: 17Closure Mounting Hardware Acces-
sories: 17
ClosuresAIR FOSC: 25Characteristics: 6FOSC 350: 25FOSC 400
Flame Retardant: 25FOSC 500: 25Gator 12F: 25
CWDM: 20, 21
D
Description Key: 9Dimensions
Closure: 27Splice Tray: 28
Dome: 7Dome to Base Seal: 7Drawings
FOSC 450 A: 27FOSC 450 B: 27FOSC 450 BS (B Short): 27FOSC 450 C: 27FOSC 450 D: 27
F
Field-Installable CWDM: 21Field-Installable Splitter: 18FOSC 250 Closure: 25FOSC 350 Closure: 25FOSC 400 Closures: 25FOSC 400 Flame Retardant
Closures: 25FOSC 500 Closures: 25FOSC Closures
450 A: 5450 B: 5450 B Short: 5450 C: 5450 D: 5
FOSC OC CWDM: 20FOSC OC Splitter: 18
G
Gator 12F Gel Splice Closure: 25Gel Block: 7
M
Mounting: 17
O
Ordering: 8, 9
P
PassivesCWDMs: 22Splitters: 19
Patch Trays: 15
R
Ribbon Fiber Trays: 15
S
Seal: 7SMOUV Fusion Splice Protection
Sleeve: 15Splice Modules: 15Splice Tray Covers: 15Splice Tray Dimensions: 28Splitter: 18
T
Trigger: 7
©2004 - 2009 Tyco Electronics Corporation. All rights reserved.1654571 F429.11/09
Tyco Electronics Corporation8000 Purfoy RoadFuquay Varina, NC 27526-9349Tel: 919-557-8900Fax: 919-557-8498www.tycoelectronics.comwww.us.telecomosp.com
FOSC 250, FOSC 350, FOSC 400, FOSC 450, FOSC 500, FOSC 600, AIR FOSC, GATOR, TE (logo), and Tyco Electronics are trademarks of the Tyco Electronics group of companies and its licensors.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, Tyco Electronics makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. Tyco Electronics’ obligations shall only be as set forth in Tyco Electronics’ Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of Tyco Electronics products should make their own evaluation to determine the suitability of each such product for the specific application.