Flexi-Crete PCS
� Flexi-Crete Penetrating Concrete Sealer (PCS) is a ready to use, non-toxic, concrete sealer for waterproofing concrete surfaces.
� Flexi-Crete PCS is designed to strengthen, harden, dustproof, and waterproof concrete floors.
Flexi-Crete PCS
� Penetrates the concrete by reacting with the free lime.
� Seals the pores and capillaries by forming a silica gel.
� The silica gel hydrates and solidifies, thus increasing the strength of the concrete.
� It dustproofs, hardens, strengthens, and waterproofs old and new concrete surfaces.
Flexi-Crete PCS
� Use of Flexi-Crete PCS for Waterproofing� Seals the porosity in the concrete due to deep penetration.
� Allows the concrete to breathe.
� Can be used on the negative side.
� Brick bat coba, and various other waterproofing coatings can be avoided.
� Seals hairline cracks.
Penetration of Flexi-Crete Penetrating Concrete Sealer (PCS)
Flexi-Crete PCS
� Use of Flexi-Crete PCS for Waterproofing� Flexible Penetrating Waterproofing System
� Water leaks through cracks formed due to thermal expansion and contraction.
� Flexi-Crete PCS and Flexi-Crete SC 300 can provide a‘Flexible Penetrating Waterproofing System’
Flexi-Crete PCS
� Areas of Application� Concrete terraces
� Podiums
� Terrace gardens
� Most concrete surfaces
Flexi-Crete PCS
� Use of Flexi-Crete PCS as Floor Hardener� Concrete floors at factories, warehouses, malls, etc are subjected to continuous activity.
� Concrete is porous, and the continuous use often causes them to have a problem of dusting.
� Thus concrete floors need to be treated suitably.
Types of Treatments For Concrete Floors
� Kota Stones
Advantages Disadvantages
Strength and durability Multiple joints
Can be polished to have gloss Overall system cost is high
Substitute to tremix flooring Requires skilled labour to install
Types of Treatments For Concrete Floors
� Epoxy Coatings
Advantages Disadvantages
Widely used & Easily available Surface coating, hence limited life
Various colour options available Can be scratched easily
Good dustproofing qualities Requires continuous maintenance to good performance
High abrasion resistance(Needs thicker coatings, which are expensive)
Requires skilled labour for application
Outdoor applications not possible and it may not be UV stable
Comparison
Property Flexi-Crete PCS Kota Stones Epoxy Coatings
Hardening Increases hardness No floor hardening. But stones have good strength
No increase in hardness
Sealing of porosity
Seals almost all the porosity on the concrete
Covers up all the porosity. However the joints are troublesome.
Seals porosity 100%. However requires periodic maintenance and recoating.
Maintenance No required Required every time the joints open up
Required
Abrasion Resistance
Improves abrasion resistance
Improves abrasion resistance
Poor abrasion resistance
Initial Pricing
Economical Expensive system costs Expensive
Maintenance Cost
None Medium High
Flexi-Crete PCS
� Areas of Application� Factories/Industries
� Warehouses
� Heavy Pedestrian Foot Traffic Areas
� Parking Facilities
Flexi-Crete PCS
� Advantages of Flexi-Crete PCS� Strengthens and hardens the concrete surfaces
� Dustproofs concrete surfaces
� Waterproofs concrete surfaces
� Increases abrasion resistance
� Reduces the penetrations of oils, water ,etc
� Densifies concrete
� Reduces efflorescence
� Surfaces treated with Flexi-Crete PCS can be painted/plastered without use of a primer, etc.
� Ready to use and easy to apply.
Application Procedure
� Clean the concrete surface, and make sure it is free from dust and other contaminants.� Pre-wet the concrete surface with clean water, using a low pressure garden sprayer, and
allow the surface to dry.� Once the top surface of the concrete surface begins to dry, start spraying
Flexi-Crete PCS uniformly with a low pressure garden sprayer.� There may be spots on the concrete surface that may dry off quickly. Re-apply Flexi-
Crete PCS on those areas.� After 24 hours, apply the second coat Flexi-Crete PCS on the concrete surface in a
similar manner. Please note that no pre-wetting is required before the application of the second coat of Flexi-Crete PCS.
� Allow the concrete to air cure for 7 days, after the application of second coat. � The surface is ready to use from the 8th day onwards.� To get a shine on the treated surface, buff the surface using a hogs hair pad of around
500-800 grit, depending on the amount of shine required. � Please note that one coat of Flexi-Crete PCS is sufficient if it is applied on a
smooth surfaces such as tremix surface, parking floors, warehouses, etc. Two coats of Flexi-Crete PCS are required wherever the concrete surface is not smooth, such as concrete slabs, etc
Thank You
M/S Poly FlexA229, AntophillWarehousing Complex,
Vidyalankar College Road,Wadala (East)
Mumbai 400037Phone: 91 22 66059800
Web: http://www.polyflex.co.in
Email: [email protected]