Download - Erdinc klima sk_broschuere_gb
Safeguarding our future with consistent energy efficiency!
Rittal – System climate control
Rittal is your value-creating partner for comprehensive
technology packaging solutions. We offer individual
system benefits based on our complete product range,
extensive expertise and global customer service – cross-
sector, value-maximising solutions that are one hundred
percent benefit-focussed.
Rittal system climate control is proven to boost energy
efficiency by up to 45 percent – while ensuring optimum
cooling performance for all control and IT components.
Thanks to the significant reduction in energy consumption,
Rittal’s innovative cooling concepts are major contributors
to cost efficiency in your company, while at the same time
helping to cut CO2 emissions in the environment.
From system to solution: Comprehensively individual
However individual your business, you can be surethat all Rittal climate control systems provide a
comprehensive expert package:
● Exemplary energy efficiency
● Plus special project engineering
● Plus permanent innovative strength
● Plus typical Rittal high-quality production.
Rittal never loses sight of a project’s particular
customer requirements. The aim is always the same:
to produce maximum benefits for the customer.
Expertise +
Efficiency + Engineering + Innovation + High qualitySystem solutions from page 15For mechanical engineering .............................................................15For the IT sector ................................................................................19
For various ambient conditions.........................................................23For final assembly/handling systems................................................27
Project planning from page 31Basic principles for the use of climate control components ............32Cooling with ambient air ...................................................................35Cooling units .....................................................................................36
Liquid cooling IE/IT ...........................................................................37Enclosure heaters .............................................................................39
Cooling with ambient air from page 41Fan-and-filter units ............................................................................42Rack-mounted fans...........................................................................50Tangential fans..................................................................................50
Fan systems......................................................................................54Air/air heat exchangers.....................................................................60
Cooling units from page 67Modular climate control concept ......................................................68Roof-mounted cooling units ..............................................................72
Wall-mounted cooling units ..............................................................80Thermoelectric coolers .....................................................................96
Liquid cooling IE from page 99Air/water heat exchangers, roof-mounted .....................................100 Air/water heat exchangers, wall-mounted .................................... 100Direct Cooling Package (mounting plate cooling)......................... 110Recooling systems for water ..........................................................116
Recooling systems for oil ............................................................... 130Immersible recooling systems for oil/emulsion ............................. 132
Liquid cooling IT from page 135CRAC systems................................................................................136 Aisle containment........................................................................... 139Liquid Cooling Package (rack cooling) ......................................... 140
Chillers for IT cooling ......................................................................146 Water/water heat exchangers ........................................................150 Piping systems................................................................................154
Outdoor climate control from page 157Cooling units for CS modular enclosures .......................................160Heat exchangers for CS modular enclosures ................................161
Climate control units for Toptec CR............................................... 163Ex-proof climate control systems ...................................................164
Enclosure heaters from page 167Enclosure heaters ..........................................................................168
System accessories from page 171Air routing....................................................................................... 174Control/regulation........................................................................... 177Mounting accessories.................................................................... 181Cold Plate....................................................................................... 184
Liquid Cooling Package ................................................................ 186Filter technology ............................................................................ 189General .......................................................................................... 192Software service........................................................................... 195
Tips and tricks from page 197Cooling with ambient air .................................................................198Cooling units ...................................................................................207Liquid cooling IE .............................................................................217
Liquid cooling IT .............................................................................230Enclosure heaters ...........................................................................234Monitoring .......................................................................................235
Technical details from page 239Cooling with ambient air .................................................................240Cooling units ...................................................................................245Liquid cooling IE .............................................................................251
Liquid cooling IT .............................................................................266Enclosure heaters ...........................................................................267System accessories........................................................................268
Overview of products and approvals from page 271Overview of products and approvals .............................................272
Service .......................................................................................... 298List of model numbers................................................................. 300Index.............................................................................................. 303
3Rittal System Climate Control
Rittal climate expertise
4
Rittal climate expertise –
Outstanding breadth and quality.
Rittal cooling concepts are
synonymous with guaranteed
quality, from the product itself
right through to customer service.
Global availability, globally sought-
after. International approvals are
just as much part of the Rittal
“system concept” as uniform
system platforms for cooling units
and heat exchangers. Rittal’s
winning formula for climate control
expertise centres around one
basic idea, with infinite
possibilities. Flexible, inexpensive,
and exceptionally efficient. Rittal
cooling concepts are complete
solutions, precisely tailored to
your requirements and offering
exceptional added-value.
5
Total efficiency
6
Rittal efficiency – A fresh take on
creativity and value-added.
Thanks to its intensive research
and development work with
Pro Ozone cooling units, Rittal
has helped to focus the world’s
attention on “efficiency”. With a
host of innovative ideas such as
nano surface protection, the
Liquid Cooling product family and
coolants based on environmentally
neutral CO2, Rittal is renowned as
a world leader in this field.
Less is more, is our guiding
principle: Less consumption of
energy and resources on the
one hand, and more cost-
effectiveness and productivity
for customers on the other. Rittal’s
solutions successfully unite these
two principles.
7
Engineering partners
Rittal engineering – Building on
cooperation for a shared future.
Whether you require analysis of an
existing climate control concept,
or help planning a new one, Rittal
is a partner you can rely on. As
well as manufacturing system com-
ponents, Rittal also collaborates
closely with customers in the
research and development field.
We act as engineering partners
to our clients. A combination of
practical experience and project
planning leads to innovative,
comprehensive climate control
concepts.
Rittal’s customer service and main-
tenance divisions guarantee com-
plete customer satisfaction from
start to finish.
9
Innovative strength
10
Rittal’s innovative strength –
Deriving fresh growth from
ideas.
Innovation cannot be planned,
but it can be continuously re-
evaluated. This is Rittal’s approach
when tackling any new task. In an
instant, an idea is born, which the
Rittal laboratories then develop
into a new product solution. The
thermoelectric cooler, which cuts
energy consumption by more than
60 % compared with conventional
systems, is just one innovative
high-end example among many.
Rittal’s engineers are encouraged
to think outside the box and come
up with new solutions. These ideas
add value and help to make our
customers more competitive.
11
High quality production
12
Rittal high quality production –
Top quality begins with the
tiniest detail.
Rittal achieves outstanding high-
quality at its own production sites
and in-house research depart-
ments, development units and test
laboratories. This in turn enables
us to guarantee outstanding pro-
duct quality, because our process
quality is second to none. Every
department is broken down into
individual process units, each of
which plays a vital role in Rittal’s
overall quality. High quality pro-
duction relies on a perfect quality
assurance chain. This quality
standard reflects Rittal’s 100 %
customer dedication.
13
14
Rittal System Clim
Sys
tem
sol
utio
ns/M
echa
nica
l eng
inee
ring
Rittal system climate control for mechanical engineering
Precision scores an ace Whenever a higher enclosure protection category is required due to hot, metal dust-
laden or oily ambient conditions, Rittal liquid cooling concepts really come up
trumps.
Precise temperature control of machine and process cooling is another priority.
When cooling spindles with 40,000 rpm, for example, Rittal recooling systems
supply volumetric flows and coolant temperatures at precisely the required level.
Rittal system climate control is the key to a high level of dimensional accuracy,
consistently perfect workpieces, and stable production conditions.
Rittal recooling systems Energy-efficient cooling of liquid cooling media. ● A high level of temperature
accuracy. ● Powerful performance. ● Individual system solutions.
ate Control
Air/water heat exchangers The classic liquid cooling solution ● For extremely hot and dusty ambient
conditions ● To dissipate high heat loads without putting
thermal pressure on the ambient air.
Rittal DCP – Direct Cooling Package Direct cooling of power electronics inside the enclosure ● Using liquid-cooled mounting
plates, with or without fans ● No impairment to the protection
category ● With efficient frequency converter
cooling.
15
Sys
tem
exa
mpl
e
16
System exampleRittal system climate control for m
5
C
11 12
19 20
4
17
18
29
31
32
35
30
33
34
echanical engineering
A
B
2
6
10 8 9
13 16
16
14 15
26 27 28 25 2123 24 22
7
3 1
Example: Rittal system climate control for mechanical and plant engineeringThe air inside the hall is contaminated with metal swarf and oil mist, and is unable to absorb waste heat from the controllers and machine cooling system. A comprehensive Rittal liquid cooling concept with central recooling (1) provides a particularly efficient solution.
All function and safety-relevant components are remotely monitored with Rittal CMC-TC (3). The benefit to you: Added perfection and increased productivity.
Machining centre, welding robot
● The coolant temperature of the process emulsion is precisely coordinated with the machining cycle of the spindle rotating at
high speed, thanks to the immersion recooling system (7).
● Process heat from the welding robot and heat loss from the PC case of the robot controller (18) – case based on TS 8, equipped with air/water heat exchanger (17) – is effectively dissipated via Rittal recooling systems (1).
● The twin-doored enclosure ES 5000 with air/water heat exchanger, wall-mounted (8), is integrated into the design of the machines.
● Rittal thermoelectric coolers (16) are a particularly compact, efficient solution for cooling the Rittal Comfort Panel (13) command panels. The enclosure is custom-built and equipped to order, with a support arm system (15) tailored to your individual requirements.
Machine controller, low-voltage distributor
● Bayed Top enclosure system TS 8 (24). ● Rittal DCP: Liquid-cooled mounting plates
(Cold Plate) (21) for efficient frequency converter cooling and
● TopTherm air/water heat exchangers, roof-mounted (23) and wall-mounted (22), with internal controllers for monitoring and control, reliably dissipate the heat loss.
● The modular power supply is type-tested for global use (28).
Industrial IT and control room
● Network enclosures are effectively climate-controlled with a special, low-noise office cooling unit (29).
● EMC fan-and-filter units (30) cool the command controller in the pedestals of the TopConsole systems (33).
A
C
B
Rittal System Climate Control
Sys
tem
exa
mpl
e
Rittal system climate control for mechanical engineering
System example
Ex overpressure enclosure with integral enclosure cooling unit for zone II, gas (6)
System-wide Components Page
Central recooling system for enclosure and machine cooling 148
Piping systems 154 CMC-TC for monitoring access, climate, power supply Cat. 32, p. 808
Test workstation: Rittal Industrial Workstation with support arm CP-S, TFT screen, membrane keyboard
Cat. 32, p. 172
Air/water heat exchanger on the IW pedestal 63 Ex overpressure enclosure, climate-controlled 164
1
2
3
4
5
6
More compact, lightweight and efficient. The powerful thermoelectric cooling unit in a lightweight design (16). The eco-friendly climate control solution for command panels and small enclosures – an energy saving of more than 60 % compared with conven-tional industry systems.
Rittal DCP Cold Plate – Liquid-
Machining centre, welding robot Components Page
Immersible recooling system for process emulsion 132 Air/water heat exchanger, wall-mounted 104 Free-standing enclosure ES 5000, twin-door Cat. 32, p. 155Cable entry, cable routing Cat. 32, p. 1045Interior installation, mounting levels Cat. 32, p. 988Signal pillar (in conjunction with CMC-TC) Cat. 32, p. 1125Rittal Comfort Panel command panel Cat. 32, p. 192Monitors, keyboards, handles for the Comfort Panel Cat. 32, p. 1133CP-L support arm system for Comfort Panel Cat. 32, p. 250Thermoelectric cooler for Comfort Panel 97 Air/water heat exchanger, space-saving accommodated on the roof of the PC case 74
PS enclosure system, based on TS 8 Cat. 32, p. 168Base/plinth for PC case system Cat. 32, p. 892Bus enclosure Cat. 32, p. 120
A
7
8
9
10
11
12
13
14
15
16
17
18
19
20
cooled mounting plates (21)Machine controller, low-voltage distributor Components Page
Rittal DCP Cold Plate – Liquid-cooled mounting plates 112
Air/water heat exchanger, wall-mounted 104 Air/water heat exchanger, roof-mounted 102 Baying enclosure system TS 8 Cat. 32, p. 136System accessories (base/plinth, walls, baying technique, locks, interior installation, cable routing) Cat. 32, p. 926
Ri4Power Form 1, heavy current power distributor Cat. 32, p. 438Ri4Power Form 2-4, form separation for low-voltage switchgear Cat. 32, p. 472
RiLine60, busbar systems Cat. 32, p. 350
B
21
22
23
24
25
26
27
28
17
Quiet performance: Office cooling units for network enclosures (29)
Rittal System Climate Control
Industrial IT and control room Components Page
Office cooling units for network enclosures 76 EMC fan-and-filter units for console systems 48Network enclosures, based on TS 8 Cat. 32, p. 745System accessories for IT (patch panels, component shelves) Cat. 32, p. 1013
TopConsole system Cat. 32, p. 156System accessories for consoles (base/plinth, interior installation) Cat. 32, p. 890
System accessories for the human/machine interface (keyboard drawers, TFT monitors, keyboards)
Cat. 32, p. 1115
C
29
30
31
32
33
34
35
Rittal System Climate Control
Sys
tem
sol
utio
ns/IT
sec
tor
Rittal system climate control for data centres and IT
Cool and efficient! A high performance server in the data centre or in the middle of the office? Without
putting additional thermal pressure on the air-conditioning system? Without the
irritating noise of high-speed fan-and-filter units? All that can now be achieved very
easily!
Because Rittal Liquid Cooling concepts offer new framework conditions for your
IT infrastructures in terms of flexibility, safety and cost-efficiency. Independent of the
room situation, with almost zero heat and noise emissions, individual server CPUs
and complete server units or electronic components receive direct, highly effective
cooling.
Modular concepts, tailored precisely to your current requirements, and easily
scalable to meet future needs.
Rittal CRAC systems By using Rittal aisle containment,
● you can optimise air-conditioning of the room
● in conjunction with the Rittal CRAC system
● in terms of energy efficiency and cooling output.
LCP – Liquid Cooling PackageRittal solves the problem of climate control for high heat losses per rack with this system family.
● Extremely high heat loads are dissipated from the rack via the LCP (air/water heat exchanger).
● Additionally, this system also allows temperature-neutral expansion of the data centre.
Piping systems The Rittal piping system provides the link between the equipment and the refrigeration system.
● An optimum design and targeted media supply ensure efficient oper-ation of all cooling components.
19
Sys
tem
exa
mpl
e
20
System exampleRittal system climate control for th
A
9
30
1.1
8
10
13
11
12
292824
e IT sector
C
B
3
2
1
4
5
6
14
17
15
16
18
19
22
20
21
7
23272625
Example: Rittal system climate control for data centres and IT High heat loads in modern data centres, maximum availability, and the most energy-efficient climate control system available. To accommodate all three requirements, you will need an individual concept: Rittal liquid cooling IT. Redundant chillers (1), free cooling (1.1) and heat recovery (7). Piping systems are designed on a project-specific basis.
Data centre
● At the heart of this concept are server racks (9) with the option of aisle containment (8).
● The cold air required is blasted in via the raised floor by two CRAC systems (10).
● Other LCP-cooled (11) computer cases also operate without dissipating heat to the ambient air.
Development server room, UPS
● The server systems are cooled via LCPs (14), without a raised floor and without putting pressure on the climate control system. The heat is dissipated completely silently via the piping system.
● All server racks are based on the TS 8 enclosure platform (15).
● The dissipation of heat loss from the UPS is also integrated into the liquid cooling concept via the air/water heat exchanger.
● Alternative recooling via LCP Inline or LCP Extend.
Administration, monitoring
● All function and safety-relevant components are remotely monitored with Rittal CMC-TC. Messages and controls occur centrally in the control room (23).
● Super-low-noise roof-mounted fans (23) cool the network enclosures in the office. An even quieter alternative are air/water heat exchangers integrated into the coolant cycle.
● EMC fan-and-filter units with speed control (24) ensure fault-free operation and cooling of the control room consoles. The result: Targeted, low-noise, energy efficient!
A
B
C
Rittal System Climate Control
Sys
tem
exa
mpl
e
Rittal system climate control for the IT sector
System example
IT chiller, redundant configuration, also with free cooling (1).
System-wide Components Page
IT chiller, redundant configuration, also with free cooling device 146
or external free cooling function 147 Double pump unit 147 Water/water heat exchanger 152 Buffer store Water/water heat exchanger 152 Emergency water supply Heat recovery
1
1.1
2
3
4
5
6
7
CRAC systems for raised floor and aisle flooding (10)
Data centre with raised floor Components Page
Rittal aisle containment 139 Server racks for aisle containment CRAC systems for raised floor and aisle flooding 138 Room temperature-neutral server extension, cooling with LCP Standard, Plus or Smart Cat. 32, p. 726
Server racks, based on TS 8, bayed with LCPs Cat. 32, p. 777System accessories for server racks (cable management devices, monitor/keyboard unit, KVM switch, power distribution, plug-in modules, component shelves, base/plinths and much more besides)
Cat. 32, p. 890
A
8
9
10
11
12
13
Ambient air-neutral server cooling with LCP air/water heat exchangers (14)
Server room without raised floor, UPS Components Page
Separate servers in the development department, cooling with LCP Standard, Plus or Smart 140
LCP Inline 145 LCP Extend 143 Server racks, based on TS 8, bayed with LCPs Cat. 32, p. 777 System accessories for server racks Cat. 32, p. 787 Air/water heat exchangers for UPS cooling 104 UPS: Power Modular Concept PMC, rack basis TS 8 Cat. 32, p. 786
Power distribution: Power Distribution Rack PDR Cat. 32, p. 787Socket strips: Power System Module PSM Cat. 32, p. 789
B
14
15
16
17
18
19
20
21
22
Roof-mounted fan for the office sector (23)
Server and network administration, video monitoring Components Page
Roof-mounted fan for the office sector 76 EMC fan-and-filter units for console systemswith speed control 48
CMC-TC, modular system for monitoring climate, access and power supply Cat. 32, p. 806
Network enclosures, based on TS 8 Cat. 32, p. 745System accessories for IT (patch panels, component shelves) Cat. 32, p. 1013
TopConsole system Cat. 32, p. 156 System accessories for consoles (base/plinth, interior installation) Cat. 32, p. 890
System accessories for the human/machine interface (keyboard drawers, TFT monitors, keyboards)
Cat. 32, p. 1115
C
23
24
25
26
27
28
29
30
21Rittal System Climate Control
Rittal System Climate Control
Sys
tem
sol
utio
ns/V
ario
us a
mbi
ent c
ondi
tions
Rittal system climate control for various ambient conditions
TopTherm-Plus Cleaning, phosphating, dipcoat-priming, spray-finishing, drying. The process
chain in a spray-finishing plant creates extremely varied ambient conditions – and
this also affects climate control of the controllers. Whether humidity, paint dust or
drying heat – these varying requirements are met by a single product range:
Rittal TopTherm-Plus cooling units.
With nano-coating of the heat exchanger surfaces, this ensures a high level of
efficiency and exceptional durability.
Rittal cooling units – Masters of energy efficiency
TopTherm-Plus cooling units Cooling units keep the enclosure internal temperature at a constant level, even to below room tempera-ture, with the air routing being tai-lored to individual requirements. Two separate circuits prevent the ingress of dust into the enclosure.
● Climate control doors ● Roof-mounted cooling units ● Wall-mounted cooling units
Electronic condensate evaporation Any condensate incurred is effectively evaporated and doesn’t need to be collected or dissipated.
Your value-added: ● Enhanced safety – No condensate drips
onto the floor. ● Time savings – No need to empty
condensate containers. ● Cost benefits – No need to lay condensate
tubing.
Master/slave mode In open bayed enclosure systems, cooling units or air/water heat exchangers with Comfort control are set to master/slave mode via a bus cable:
● Even temperature distribution across all sections of the enclosure.
● Simultaneous activation and deactivation of the devices.
● Parallel system and door limit switch function.
23
Sys
tem
exa
mpl
e
24
System exampleRittal system climate control for va
8 91211 7
14
16
15
B
C
rious ambient conditions
1 2 6
10
19
5
4
17
18
20
23
24
21
22
3
13
A
D
Example: Rittal system climate control for various ambient conditions Rittal TopTherm-Plus cooling units define the performance class of the future. Even under extremely varied ambient conditions, the control electronics are climate-controlled at a stable level and with a high degree of reliability. This is supplemented by plant-wide remote monitoring with Rittal CMC-TC (23) – this ensures availability and also saves money.
Control of the cleaning and priming line – high humidity
● Roof-mounted cooling units (1) and wall-mounted cooling units (2) in master/slave mode (3). The cooling output of several cooling units in a bayed enclosure suite is carefully coordinated to boost efficiency.
● Wall-mounted cooling units (2) may be internally mounted, partially internally mounted or externally mounted.
● Design variants: Standard, stainless steel (4), NEMA 4x, all including RiNano coating and condensate management.
Control of the spray-finishing and drying line – paint dust and heat
● Perfection in cooling and design with the modular climate control concept (7). The enclosure door and climate components are combined into one – no need for time-consuming assembly.
● Comfort controller (8) – the ideal control and safety electronics.
● Bayed EMC systems TS 8 (9) with a high level of RF attenuation.
Control and inspection workstations
● Test workstation with mini-cooling units (14).
● Individual configuration from IW modules (15) (Industrial Workstation).
● Command Panel (Optipanel) (17) with thermoelectric cooler (18) and individual panel design. Support arm system CP-XL. Configured entirely to your requirements.
Control room for the entire production process
● Server enclosures – based on TS 8 (21) – in the control room, bayed with LCP cooling (20).
● The central recooling system (19). supplies cooling medium in a particularly energy-efficient manner.
A
B
C
D
Rittal System Climate Control
Sys
tem
exa
mpl
e
Rittal system climate control for various ambient conditions
System example
Cooling units also available in stainless steel. TopTherm-Plus cooling units (1, 2) ensure constant temperatures for control electronics, regardless of variations in the ambient conditions.
Control of the cleaning and priming line Components Page
TopTherm-Plus cooling units, roof-mounted 74 TopTherm-Plus cooling units, wall-mounted 83 Master/slave mode 235 Cooling units in stainless steel 74 Bayed Top enclosure system TS 8 Cat. 32, p. 136System accessories for TS 8 (base/plinth, walls, doors, baying system, rail systems for interior installation, cable entry and much more besides)
Cat. 32, p. 926
A
1
2
3
4
5
6
TopTherm-Plus climate control doors combined with TS 8 enclosure system: Optimum airflow, no assembly work (7)
Mini-cooling unit, wall-mounted for efficient cooling of small
Control of the spray-finishing and drying line Components Page
TopTherm-Plus climate control doors combined with TS 8 70
Comfort controller 70 Bayed Top enclosure system TS 8 with EMC shielding Cat. 32, p. 329
Base/plinth (100/200 mm) for TS 8, compulsory when using climate control doors (modular climate control concept)
Cat. 32, p. 893
EMC system accessories Cat. 32, p. 572 Signal pillars Cat. 32, p. 1125Recooling system to cool the robot controller 127
B
7
8
9
10
11
12
13
Control and inspection workstations C
control and computer units (14)
Components PageMini-cooling unit, wall-mounted, on IW and TopConsole 83
Industrial Workstation (IW) Cat. 32, p. 172 TopConsole system (pedestal, desk unit) with TFT monitor in the Optipanel (CP-S support arm system) Cat. 32, p. 156
Comfort-Panel command panel on CP-XL support arm system Cat. 32, p. 192
Thermoelectric cooler 97
14
15
16
17
18
Server cooling with LCP: Horizontal cold air routing, no thermal pressure on the room, cost-effective, central recooling (19)
Control room for the entire production process Components Page
IT chiller with integral free cooling device 148 Server cooling with LCP 141 Server racks, based on TS 8, bayed with LCPs Cat. 32, p. 774 System accessories for server racks Cat. 32, p. 890 CMC-TC, modular system for monitoring climate, access and power supply Cat. 32, p. 806
System accessories for the human/machine interface (keyboard drawers, TFT monitors, keyboards)
Cat. 32, p. 1115
D
19
20
21
22
23
24
25Rittal System Climate Control
Rittal System Climate Control
Sys
tem
sol
utio
ns/fi
nal a
ssem
bly,
han
dlin
g sy
stem
s
System climate control for final assembly and handling systems
Air versus heat Even in apparently non-critical ambient conditions, for example when there is an
adequate supply of clean, cool air, it is still worthwhile to provide climate control.
Here too, the aim is to achieve maximum reliability with exceptional efficiency.
Reliability and efficiency with fan-and-filter units: Temperature-dependent speed
control plus temperature and airflow monitoring.
Reliability and efficiency with air/air heat exchangers: Thanks to separate air
circuits (external/internal), dust remains excluded, while a micro-controller
provides temperature-dependent control and monitoring of key parameters.
The benefit to you: Efficient reliability at all times.
Fan-and-filter units Fan-and-filter units are ideal for dissipating heat loads cost-effectively.
● The prerequisite is that the ambient air must be relatively clean with a temperature below the desired enclosure internal temperature.
● The entire range of fan-and-filter units is also available with EMC shielding.
Air/air heat exchangers The requirement for using air/air heat exchangers is that the ambient temperature must be below the required enclosure internal temperature.
● Dust and contaminated ambient air is unable to ingress the enclosure, thanks to the two separate air circuits.
Machine, process and enclosure cooling ● Operational reliability thanks
to liquid cooling e.g. of high-frequency motor spindles and other drive technology.
● Precise workpiece machining thanks to precise, constant temperatures of the cooling media.
● In this way, temperature peaks inside enclosures – for example, in summer – can be effectively dissipated via air/water heat exchangers.
27
Sys
tem
exa
mpl
e
28
System exampleRittal system climate control for fin
D
A
18
1 2
3
4
6
8
10
9
24
26
25
30
27
31
28
29
11
5
al assembly/handling systems
C
B13
12
15
14
22
20
21
17
16
23
18
19
B 7
System climate control for final assembly and handling systems Air versus heat – Even in non-critical ambient conditions, it is still worthwhile providing systematic climate control. Here too, the aim is to achieve maximum reliability with exceptional efficiency.
Control of production plant and handling systems
Reliability and efficiency with air/air heat exchangers (1) to cool the free-standing enclosures ES 5000 (3).
● Thanks to separate air circuits (external/internal), dust is unable to ingress.
● A high operating ratio and minimal cleaning required.
● Monitoring of key parameters via a micro-controller.
Robot: Effective liquid cooling of controller and process
A central recooling system (7) “kills two birds with one stone”:
● Effective cooling of the PC case (8) via air/water heat exchangers (6).
● Precise cooling of machine spindles and/or welding heads.
Machine operation, quality assurance
Reliability and efficiency thanks to fan-and-filter units (21) for Industrial Workstations IW (20):
● Temperature-dependent speed control. ● Temperature and airflow monitoring. Exceptionally energy-efficient cooling of command panels with thermoelectric coolers (17).
Control room
The aim is to minimise the level of noise pollution in offices:
● This can be achieved with Office roof-mounted fans (24) and speed-controlled fan-and-filter units (27).
● Zero emissions of heat and noise, thanks to a liquid cooling concept.
A
B
C
D
Rittal System Climate Control
Sys
tem
exa
mpl
e
Rittal system climate control for final assembly/handling systems
System example
Platform concept: Air/air heat exchangers, wall-mounted, have the same mounting interface as TopTherm-Plus (1, 2)
Control of production plant and handling systems Components Page
Air/air heat exchangers, wall-mounted 62 Alternatively or additionally: Rittal TopTherm-Plus cooling units, wall-mounted 83
Free-standing enclosure ES 5000 Cat. 32, p. 154Viewing window Cat. 32, p. 944System accessories (base/plinth, cable entry and interior installation) Cat. 32, p. 890
A
1
2
3
4
5
Recooling system for central enclosure and process cooling (7)
Thermoelectric cooler for
Robot control and process cooling Components Page
Air/water heat exchanger, wall-mounted on the rear door of the PC case 104
Recooling system for central enclosure and process cooling 116
PS enclosure system, based on TS 8 Cat. 32, p. 168Base/plinth for PC case system Cat. 32, p. 892Bus enclosure Cat. 32, p. 120Signal pillar (in conjunction with CMC-TC) Cat. 32, p. 1125Rittal Comfort Panel command panel Cat. 32, p. 192Monitors, keyboards, handles for Comfort Panel Cat. 32, p. 1133CP-L support arm system for Comfort Panel Cat. 32, p. 250Thermoelectric cooler for Comfort Panel 97
B
6
7
8
9
10
11
12
13
14
15
Machine operation, quality assurance C
Comfort Panel (15, 17)Components Page
Rittal Comfort Panel command panel Cat. 32, p. 192Thermoelectric cooler for Comfort Panel 97Monitors, keyboards, handles for Comfort Panel Cat. 32, p. 1133CP-L support arm system for Comfort Panel Cat. 32, p. 250Industrial workstation IW Cat. 32, p. 172Fan-and-filter unit, speed-controlled 44Optipanel with TFT monitor, CP-S support arm system Cat. 32, p. 204
Compact Panel, CP-S support arm system Cat. 32, p. 231
16
17
18
19
20
21
22
23
Effective cooling, on request with RF shielding: EMC fan-and-filter unit (27)
Control room Components Page
Office roof-mounted fans for network enclosures 55 Network enclosures, based on TS 8 Cat. 32, p. 745System accessories for IT (patch panels, component shelves) Cat. 32, p. 1013
EMC fan-and-filter units for console systems 48TopConsole system Cat. 32, p. 156System accessories for consoles (base/plinth, interior installation) Cat. 32, p. 890
System accessories for the human/machine interface (keyboard drawers, TFT monitors, keyboards)
Cat. 32, p. 1115
CMC-TC for monitoring access, climate, power supply Cat. 32, p. 806
D
24
25
26
27
28
29
30
31
29Rittal System Climate Control
30
Project planning
nn
ing
Basic principles for the use of climate control components from page 32Guide to selecting suitable units.......................................................32Heat dissipation ................................................................................33Calculation basis for enclosure climate control ................................34
Project planning software .................................................................34Interactive performance diagrams ...................................................34
Pro
ject
pla
Cooling with ambient air from page 35Fan-and-filter units ............................................................................35Air/air heat exchangers.....................................................................35
Cooling units from page 36Condensation and dehumidification of the enclosure air .................36Practical tips .....................................................................................36
Liquid cooling IE/IT from page 37Air/water heat exchangers ................................................................37Notes on water quality ......................................................................37Recooling systems/chillers ...............................................................38
Cooling water....................................................................................38Form for designing recooling systems .............................................38
Enclosure heaters from page 39Heating performance diagram..........................................................39
31Rittal System Climate Control
Pro
ject
pla
nn
ing
Project planning
32
Basic principles for the use of climate control components
Ambient conditions Enclosure interior problems
Heat Heat loss
Dust Condensate
Cool
Heat conduction
Convection Radiation
There are three basic forms of heat transfer:
Thermal conduction:Heat is transported by matter, without the matter itself being moved. The energy is passed from particle to particle.
Convection:Energy flows with the matter. The transport medium, e.g. a liquid or gas, takes up energy in the form of heat and dissipates energy as heat.
Radiation:Heat is passed from one body to another in the form of radiation energy, without a medium material.
The decisive factor for the type of heat dissipation to be used in enclosures is whether they are open (air-permeable) or closed (air-tight). Whereas in open enclosures, the heat is dissipated by means of air circulation, in closed enclosures the heat can only be dissipated via the enclosure wall.
Rittal cooling units provide the ideal system solution for ensuring an optimum operating temperature inside an air-tight enclosure, even at high external temperatures.
On the following pages, you will find a chrono-logical guide to help you to easily find the most suitable climate control solution.
Guide to selecting suitable unitsAs electronic components become ever smaller and are more densely packed in enclosures and electronic cases, systems are becoming increasingly sensitive to external factors such as dust, oil, moisture and temperature. Heat in particular is a deadly enemy of sensitive microelectronics.
For example, a general rule of thumb for semi-conductors is that an increase in the operating temperature of 10°C, in relation to the maximum permissible operating temperature, will shorten its service life by half.In order to guarantee proper functioning of the electronics, this heat needs to be dissipated.
Rittal System Climate Control
Project planning
Rittal System Climate Co
Pro
ject
pla
nn
ing
Protection category
Ti target > Tu max.
nt
IP 54 important
rol
No
Integrated louvres, air inlet/outlet grilleRoof ventilation, fan-and-filter unit
YesAir/air heat exchanger
Ti target < or = Tu max.
Cooling water cycleavailable at theinstallation site
Yes
Air/water heat exchangerNo
Cooling unitRecooling system
Ti = Required internal temperature of enclosure [°C]Tu = Ambient temperature of enclosure [°C]
es contain detailed calculation formulae for your chosen option.
Fast selection
Heat dissipation Before you start, please consider your peripheral conditions such as external temperature, internal temperature and protection category. In order to achieve targeted, effective cooling, it is important to ensure correct calculation of the required climate control components and possible thermal analysis using computer-assisted flow models (CFD – Computational Fluid Dynamics).
Basic selection:
The following pag
Calculation of effective enclosure surface areaOf the variables required for calculation purposes, the effec-tive enclosure surface area A requires special explanation. The thermal output dissipated by the enclosure not only depends on its actual surface area; the installation type of the enclosure also plays a decisive role.
An enclosure which stands in a room unobstructed on all sides may dissipate more heat than one sited against a wall or in a niche. For this reason, there are precise specifications on how to calculate the effective enclosure surface area depending on the type of installation site. The formulae for calculating A are specified in DIN 57 660, part 500 and IEC 890 (see table below).
Enclosure installation type to IEC 890
Single enclosure, free-standing on all sidesSingle enclosure for wall mountingFirst or last enclosure in a suite, free-standing
First or last enclosure in a suite, for wallmountingEnclosure within a suite, free-standing
Enclosure within a suite, for wall mountingEnclosure within a suite, for wall mounting, covered roof surfaces
Installation typeto IEC 890 Formula for calculating A [m2]
A = 1.8 x H x (W + D) + 1.4 x W x DA = 1.4 x W x (H + D) + 1.8 x D x HA = 1.4 x D x (H + W) + 1.8 x W x HA = 1.4 x H x (W + D) + 1.4 x W x DA = 1.8 x W x H + 1.4 x W x D + D x HA = 1.4 x W x (H + D) + D x HA = 1.4 x W x H + 0.7 x W x D + D x HA = Effective enclosure surface areaW = Enclosure width [m]H = Enclosure height [m]D = Enclosure depth [m]
33
Pro
ject
pla
nn
ing
Project planning
34
General information
Calculation basis for enclosure climate controlIn natural convection, heat loss is dissipated to the outside via the enclosure panels. The prerequisite for this is that the ambient temperature must be lower than the temperature inside the enclosure. The maximum temperature increase (ΔT)max. which may occur inside an enclosure compared with the ambient air is calculated as follows:
Note:If the heat loss inside the enclosure is not known, this basic formula can be used to calculate actual heat loss, by measuring the ambient temperature Tu and the en-closure internal temperature Ti
QV = Heat loss installed in the enclosure [W]
QS = Heat emitted by the enclosure surface [W]QS > 0: Radiation (Ti > Tu)QS < 0: Irradiation (Ti < Tu)
QE = Required cooling output of an enclosure cooling unit [W]
QH = Required thermal output of an enclosure heater [W]
qw = Specific thermal output of a heat exchanger [W/K]
V = Required volumetric air flow of a fan-and-filter unit to maintain the maximum permissible temperature difference between the extracted air and the emitted air [m3/h]
ΔT = Ti – Tu = Max. admissible temperature difference [K]
A = Effective, heat loss-dissipating enclosure surface area to IEC 890 [m2]
k = Heat transfer coefficient [W/m2K] for sheet steel k = 5.5 W/m2K
.
...
.
.
.
(ΔT)max. = QV.
k � A
QS = A � k � ΔT (watts) .
Project planning software Rittal Therm Make calculation even easier and faster by using our project planning software Rittal Therm.Model No. see page 195.
EPLAN Cabinet Tool for the planning of enclosures and defining data for climate control calculations. Order information see page 195.
Interactive performance diagramsInteractive performance diagrams may be found on the Internet at www.rittal.com on the respective component data sheets in the “Downloads” section, under the heading “Characteristic curve”.
Enter your required interior temperature and the maximum exterior temperature in the relevant boxes, then click on “Calculate”. The heat loss that may be dissipated under these conditions will be displayed.
Rittal System Climate Control
Project planning
Pro
ject
pla
nn
ing
Fan-and-filter units, air/air heat exchangers
35Rittal System Climate Control
Fan-and-filter unitsThe following applies when calculating the volumetric air flow:
Performance diagram SK 3325. . . .
f = 3.1 m3 � K/Wh at h = ( 0 to 100)f = 3.2 m3 � K/Wh at h = (100 to 250)f = 3.3 m3 � K/Wh at h = (250 to 500)f = 3.4 m3 � K/Wh at h = (500 to 750)f = 3.5 m3 � K/Wh at h = (750 to 1000)f = Compensating factorh = Height above sea level [m]
V.
QV.
30 50 70 90 300 500 70010 20 40 60 80100 200 400 600800
100
200
300
400500600
8001000
1500
2000
30002500
Δ T
40 K
Δ T
35 K
Δ T
30 K
Δ T
25 K
Δ T
20 K
Δ T
15 K
Δ T
10 K
Δ T
5 K
Selection diagramThe styling of the vent louvres in Rittal fan-and-filter units guarantees exemplary stability of the air vol-umes in relation to pressure loss. The correct fan-and-filter unit has been chosen if the specified heat loss is dissipated whilst complying with the desired maximum enclosure internal temperature.
V = Volumetric flow (m3/h)
QV = Heat loss (W)
.
.
100 200 300
20
40
60
80
100
120
140
00
ΔPst
V.
50 Hz60 Hz
V = Volumetric flow (m3/h)ΔPst = Stat. pressure difference (Pa)
.
V = f � QV ΔT
. .
Air/air heat exchangersCalculate the specific thermal outputof the heat exchanger:
Selection diagram
Note: For ambient temperatures that are lower than the desired enclosure internal temperature, the use of air/air heat exchangers may be appropriate, particularly in cases where there are dust, oil and aggressive substances in the ambient air which must not be allowed to ingress the enclosure under any circumstances.
ΔT = Temperature difference (K)QV = Heat loss (W)qw = Specific thermal output (W/K)A = Enclosure surface area to IEC 890 (m2)k = Heat transfer coefficient (W/m2 K)
for sheet steel k = 5.5 W/m2 K
qw
ΔT
A
5 010152025
30
40
50
6070
10 30 50 70
024681012
3000 2000 1000 0 20 40 60 80
QV.
.
qw =QV – (A � ΔT � k)
ΔT
.
Project planningP
roje
ct p
lan
nin
g
Cooling units
36 Rittal System Climate Control
Cooling units
Condensation and dehumidification of enclosure air when using cooling unitsOne unavoidable side-effect of using cooling units is the dehumidification of the enclosure’s interior air. As it cools down, part of the humidity contained in the air condenses on the evaporator coil. This condensate must be reliably discharged from the enclosure. The amount of condensate occurring depends on relative humidity, the air temperature inside the enclosure and on the evaporator coil, and the air volume present in the enclosure. The Mollier h-x diagram shows the water content of air depending on its temperature and relative air humidity.
Mollier h-x diagram for calculating the water content of air.
Pd
T
x
50
45
40
35
30
25
20
15
10
5
0
– 5
– 10
– 15
– 200
50 10 15 20 25x2 x1 30 35 40
6030 45155 10 20 25 35 40 50 55
10%
20%
30%
40%
50%
60%
70%
80%
100%
➀
90%
Pd = Water vapour partial pressure (mbar)T = Air temperature (°C)x = Water content (g/kg dry air)➀ = Relative humidity
Practical tipsIn all situations where optimum operating temperatures are required inside an enclosure, even at high external temperatures, a Rittal enclosure cooling unit can provide the right solution. It is even possible to cool the interior temperature of the enclosure to well below the ambient temperature. The favourable aerodynamic arrangement of the air inlet and outlet openings in the internal and external circuits ensures optimum air circulation inside the enclosure. This sample calculation will show you a quick, time-saving method for calculating a cooling unit.
For example:A cooling unit with a refrigeration output of 1500 watts commences operation with a temperature setting of Ti = 35°C. The relative ambient air humidity is 70 %. If air at 35°C is passed over the evaporator coil, the surface temperature of the evaporator coil (evaporation temperature of the refrigerant) is approximately 18°C. At the boundary layer adhering to the surface of the evaporator coil, water is deposited at the dew point. The difference Δx = x1 – x2 indicates how much condensation is incurred per kg of air with complete dehumidification. The leak-tightness of the enclosure has a decisive effect on the quantity of condensation.
Enclosure door closed:Only the enclosure volume is dehumidified.
Poorly sealed cable designs, damaged door seals and the attachment of display media to enclosure surfaces lead to increased rates of leakage in the enclosure. Hence, with a leakage rate of, say, 5 m3/h, a continuous condensate volume of up to 80 ml/h may occur.
Summary:Enclosure cooling units should only operate with the door closed.
● Seal the enclosure on all sides.● Use a door limit switch.● Use TÜV-tested equipment.● Only set the enclosure internal temperature as low as is
actually needed.
W = Water quantity in gV = Volume of the enclosure in m3 ρ = Density of air kg/m3 Δx = Difference of water content in g/kg dry air
(from the Mollier h-x diagram)
V = width � height � depth = 0.6 m � 2 m � 0.5 mV = 0.6 m3 W = V � ρ � Δx
= 0.6 m3 � 1.2 kg/m3 � 11 g/kgW = 7.92 g 8 ml
Calculate your required cooling output.
The quantity of condensation is calculated from the following equation:
QE = QV – k � A � ΔT . .
W = V � ρ � Δx
Project planning
Pro
ject
pla
nn
ing
Air/water heat exchangers
37Rittal System Climate Control
Air/water heat exchangers Calculate your required cooling output:
e.g. performance diagramAir/water heat exchanger 1000 W
TW
Ti
5250
10 15 20 25 30
500
750
1000
1250
1500
1750
QK.
45°C
35°C
25°C
VW = 400 l/hVW = 200 l/hVW = 100 l/h
.
.
.
Tw = Water inlet temperature (°C)
QK = Continuous useful cooling output (W)
Ti = Enclosure internal temperature (°C)
.
Notes on water qualityFor safe operation of the equipment, it is essential to observe the VGB guidelines on cooling water (VGB-R 455 P).
Cooling water must not contain any limescale deposits or loose debris; in other words, it should have a low level of hardness, particularly a low level of calcium hardness. For recooling within the plant, the calcium hardness should not be too high. On the other hand, however, the water should not be so soft that it attacks the operating materials. When recooling the cooling water, the salt content should not be allowed to increase excessively due to the evaporation of large quantities of water, since electrical conductivity increases as the concentration of dissolved substances rises, and the water thereby becomes more corrosive. For this reason, not only is it always necessary to add a corresponding quantity of fresh water, but also to remove part of the enriched water.
Gypsiferous water is unsuitable for cooling purposes because it has a tendency to form boiler scale, which is particularly difficult to remove. Furthermore, cooling water should be free from iron and manganese, because otherwise deposits may occur which settle in the pipes and block them. At best, organic substances should only be present in small quantities, because otherwise sludge deposits and microbiological contamination may occur.
Material of the water-carrying parts Hydrological data CuAl V4A1) pH value 7 – 8.5 6 – 9Calcium hardness > 3 < 8° dH 1 – 12° dHFree carbonic acid 8 – 15 mg/dm3 1 – 100 mg/dm3 Accompanying carbonic acid 8 – 15 mg/dm3 freeAggressive carbonic acid 0 mg/dm3 0 – 400 mg/dm3 Sulphides free freeOxygen < 10 mg/dm3 < 10 mg/dm3 Chloride ions < 50 mg/dm3 < 200 mg/dm3 Sulphate ions < 250 mg/dm3 < 500 mg/dm3 Nitrates and nitrites < 10 mg/dm3 < 100 mg/dm3 COD < 7 mg/dm3 < 40 mg/dm3 Ammonia < 5 mg/dm3 < 20 mg/dm3 Iron < 0.2 mg/dm3 freeManganese < 0.2 mg/dm3 freeConductivity < 2200 μS/cm < 4000 μS/cmResidue on evaporation < 500 mg/dm3 < 200 mg/dm3 Potassium permanganate consumption < 25 mg/dm3 < 40 mg/dm3
Suspended matter
< 3 mg/dm3 > 3 < 15 mg/dm3 partial current purification recommended> 15 mg/dm3 continuous purification recommended
1) The complete absence of corrosion under experimental conditions suggests that solutions with a significantly higher salt content and greater corrosion potential (such as seawater) may still be tolerated.
QE = QV – k � A � ΔT . .
Project planningP
roje
ct p
lan
nin
g
Recooling systems/chillers
38 Rittal System Climate Control
Recooling systems/chillersRecooling systems may be used in all situations where a high cooling load is required, e.g. in process and machine cooling, in media cooling or when dissipating heat loss from enclosures via air/water heat exchangers.
Our project engineers will be happy to help you design a recooling system for your specific application area. An overview of the planning data required for this purpose can also be found on the Internet at www.rittal.com in the section on system climate control/process and machine cooling.
Cooling waterPreparation and maintenance of the water in recooling systemsDepending on the type of installation to be cooled, certain requirements are placed on the cooling water with respect to purity. According to the level of contamination and the size and design of the recooling systems, a suitable process is used to prepare and/or maintain the water. The most common types of contamination and most frequently used techniques to eliminate them in industrial cooling are:
Contamination of the water Procedure
Mechanical contamination
Filtering of water via– Mesh filter– Gravel filter– Cartridge filter– Precoated filter
Excessive hardness Water softening via ion exchange
Moderate content of mechanical contaminants and hardeners
Addition of stabilisers and/or dispersing agents to the water
Moderate content of chemical contaminants
Addition of passifiers and/or inhibitors to the water
Biological contaminants, slime bacteria and algae Addition of biocides to the water
Form for designing recooling systemsSimply tick the type of system, and select or enter the criteria to suit your requirements. Please also include your name, company and address. Once you have completed the form, you can generate a PDF to print out or send via e-mail as an enquiry. The form for the design of recooling systems may be found on the Internet at:
www.rittal.com –> Products –> System climate control
–> Product portfolio –> Process and machine cooling –> Recooling systems
–> Form for designing recooling systems
Project planning
Pro
ject
pla
nn
ing
Enclosure heaters
39Rittal System Climate Control
Enclosure heatersThe required thermal output is calculated from:
Heating performance diagram
QH = Thermal output (W)A = Enclosure surface area to IEC 890 (m2)ΔT = Temperature difference (K)
Based on:Interior siting, static air, heat transfer coefficient k = 5.5 W/m2 K
For exterior siting (moving air): Double the determined thermal output
A
ΔT
1
1.5
2
3
4568
10
15 30 50 150 300 50010 20 40 60 80 100 200
20
30
2 5 7.5 10
15
QH.
.
QH = A � ΔT � k .
Cooling with ambient air
Co
olin
g w
ith
am
bie
nt
air
Fan-and-filter units from page 42
� � Fan-and-filter units . . . . . . . . . . . . . . . . . . . . . . . . . . 20/55 m3/h. . . . . . . . 44� � Fan-and-filter units . . . . . . . . . . . . . . . . . . . . . . . . 105/180 m3/h. . . . . . . . 45� � Fan-and-filter units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 m3/h. . . . . . . . 46� � Fan-and-filter units . . . . . . . . . . . . . . . . . . . . . . . . 550/700 m3/h. . . . . . . . 47
� � � Fan-and-filter units . . . . . . . . . . . . . . . . . . . . . . . . 20 – 105 m3/h. . . . . . . . 48� � � Fan-and-filter units . . . . . . . . . . . . . . . . . . . . . . . 180 – 700 m3/h. . . . . . . . 49
Rack-mounted fans from page 50
� � for 482.6 mm (19˝) . . . . . . . . . . . . . . . . . . . . . . . . 320/480 m3/h. . . . . . . . 52
Tangential fans from page 50
� � for 482.6 mm (19˝) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 m3/h. . . . . . . . 53
Fan systems from page 50
� � RTT roof-mounted fan and vent attachment. . . . . 400/800 m3/h. . . . . . . . 54� � Roof-mounted fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360 m3/h. . . . . . . . 54� Roof-mounted fan for the office sector. . . . . . . . . . . 1500 m3/h. . . . . . . . 55
� Enclosure internal fan . . . . . . . . . . . . . . . . . . . . . . . . . 160 m3/h. . . . . . . . 55� Fan mounting plate. . . . . . . . . . . . . . . . . . . . . . . . . . . 180 m3/h. . . . . . . . 56
Fan expansion kit . . . . . . . . . . . . . . . . . . . . . . . . 108/184 m3/h. . . . . . . . 56� Fan mounting plate DC . . . . . . . . . . . . . . . . . . . . . . . 990 m3/h. . . . . . . . 57� Fan roof, modular, two-piece . . . . . . . . . . . . . . . . . . . . 180 m3/h. . . . . . . . 58� Fan unit, active . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 m3/h. . . . . . . . 58
� � Door-mounted fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 m3/h. . . . . . . . 59� Fan expansion kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 m3/h. . . . . . . . 59
With EMC shielding Standardised installation 482.6 mm (19˝) installation
Rittal System Clima
Interchangeable airflow direction
Passive ventilation
Air/air heat exchangers from page 60
� � � Wall-mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12/62 W/K. . . . . . . . 62� � Wall-mounted with controller . . . . . . . . . . . . . . . 17.5 to 90 W/K. . . . . . . . 63
� � Wall-mounted, railway-compatible version . . . . . .27 to 98 W/K. . . . . . . . 64 � Roof-mounted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 W/K. . . . . . . . 65
Standardised installation
Suitable for command panels
Wall-mounted
Roof-mounted
24 V DC and 110 V DC
41te Control
Fan-
and-
filte
r un
its
Fan-and-filter units
Fan-and-filter units are ideal for dissipating heat loads
cost-effectively. The prerequisite is that the ambient air
must be relatively clean with a temperature below the
desired enclosure internal temperature. The entire
range of fan-and-filter units is now also available with
EMC shielding and all required rated voltages.
42 Rittal System Climate Control
Fan-
and-
filte
r un
its
Aesthetics and functionTypical of the Rittal fan-and-filter unit design is the extremely low build height. The super-slimline vent grille guarantees optimum air throughput with low noise generation. Combined with the technical features, Rittal fan-and-filter units meet all application requirements.
Rittal System Climate Control
Fast assemblySuper-fast clip-on mountingThis guarantees fast, completely secure attachment of the fan-and-filter unit. The prerequisites for protection category IP 54 are met as standard. Screws are not required. Removal of the louvred grille, like-wise without any screws, means that filter mat changes can be achieved in next to no time.
Draw-in or extract?The air direction may be quickly reversed from draw-in (default setting) to extracting. Simply rotate the fan through 180°.
Application diversity and functionsParticularly for applications in the food industry, the hose-proof hood prevents the ingress of damp. The protection category of IP 56 is achieved in conjunction with filter mats.
Not always full power!At lower ambient temperatures, the air throughput may be reduced. By adapting the fan-and-filter speed to match the temperature using a controller, noise generation is reduced.
Also available with EMC shieldingAll fan-and-filter units and outlet filters are alternatively available with EMC shielding. The required conductive connection is achieved via a metallic coating on the fan-and-filter unit housing and a special sealing frame.
Benefits at a glance● Air throughput from 20 m3/h to 700 m3/h● Super-fast assembly● IP 54 as standard● Air flow direction may be reversed from
draw-in (default setting) to extracting● All fans also available with EMC shielding● Minimal installation depth● Fan also bayable
Important● The prescribed heat loss and the
maximum anticipated ambient temperature define the required volumetric flow
● Always use the fan-and-filter units and outlet filters together
Tips and tricksApplications see page 198
Selection criteria see page 199
Assembly see page 200
43
Fan-
a
Fan-and-filter unitsAir throughput 20/55 m3/h
H2
B2
T2
B1
T1
H1
B = WidthT = Depth
nd-f
ilter
uni
ts
Su
pply includes:Fan-and-filter units ready for installation, including filter mats.German registered design no. M 93 04 846
Approvals, see page 272.
Performance diagrams, available on the Internet.
Model No. SK fan-and-filter unit 3321.107 3321.117 3321.027 3321.0471) 3322.107 3322.117 3322.027 3322.0471)
Rated operating voltage V/Hz 230, 50/60 115, 50/60 24 (DC) 48 (DC) 230, 50/60 115, 50/60 24 (DC) 48 (DC)
Dimensions in mmB1/H1 116.5 148.5B2/H2 92 + 0.82) 1242)
T1 10 10.5Max. installation depth mm T2 42 57Air throughput, unimpeded air flow 20/25 m3/h 20 m3/h 55/66 m3/h 55 m3/h
Air throughput with outlet filter including standard filter mat 1 x SK 3321.207: 15/18 m3/h 1 x SK 3322.207: 43/50 m3/h
Axial fan Self-starting shaded pole motor DC motor Self-starting
shaded pole motor DC motor
Rated current max. 69 mA58 mA
138 mA115 mA 125 mA 90 mA 0.12 A
0.11 A0.24 A0.23 A 170 mA 90 mA
Power 12.5 W/10.3 W 3.0 W 4.1 W 19.0 W/18.0 W 4.0 W 4.4 WNoise level 41/46 dB (A) 41 dB (A) 46/49 dB (A) 42 dB (A)Temperature range –10°C to +55°CColour RAL 70353)
Protection category to EN 60 529 IP 54 standard IP 56 when using a hose-proof hood
Model No. SK outlet filter 3321.207 3322.207
Accessories Packs of PageSpare filter mats 5 3321.700 3322.700 191 Thermostat 1 3110.000 178 Temperature indicator 1 3114.100 3114.115 3114.024 – 3114.100 3114.115 3114.024 – 177 Speed control 1 3120.000 3120.115 – – 3120.000 3120.115 – – 179 Hose-proof hood 1 3321.800 3322.800 193
1) Delivery times on request.2) For metal thickness > 2.5 mm the cut-out B2/H2 must be 1 mm larger. 3) RAL 7032 on request.Special voltages available on request. We reserve the right to make technical modifications.
44 Rittal System Climate Control
Accessories Page 171 EMC-protected design Page 48 Configuration software Page 195
Air throughput 105/180 m3/h
Fan-and-filter units
and-
filte
r un
its
H2
B2
T2
B1
T1
H1
B = WidthT = Depth
Su
Fan-
pply includes:Fan-and-filter units ready for installation, including filter mats.
German registered design no. M 93 04 846
Approvals, see page 272.
Performance diagrams, available on the Internet.
Model No. SK fan-and-filter unit 3323.107 3323.117 3323.027 3323.0471) 3324.107 3324.117 3324.027 3324.0471)
Rated operating voltage V/Hz 230, 50/60 115, 50/60 24 (DC) 48 (DC) 230, 50/60 115, 50/60 24 (DC) 48 (DC)
Dimensions in mmB1/H1 204 255B2/H2 1772) 2242)
T1 12.5 12.5Max. installation depth mm T2 82.5 105Air throughput, unimpeded air flow 105/120 m3/h 105 m3/h 180/160 m3/h 180 m3/h
Air throughput with outlet filter including standard filter mat
1 x SK 3323.207: 71/82 m3/h 2 x SK 3323.207: 85/98 m3/h 1 x SK 3325.207: 78/90 m3/h
1 x SK 3325.207: 115/95 m3/h 2 x SK 3325.207: 165/140 m3/h 1 x SK 3326.207: 155/130 m3/h
Axial fan Self-starting shaded pole motor DC motor Self-starting
shaded pole motor DC motor
Rated current max. 0.12 A0.11 A
0.24 A0.23 A 170 mA 90 mA 0.19 A
0.20 A0.38 A0.40 A 0.3 A 0.34 A
Power 19.0 W/18.0 W 4.0 W 4.3 W 30.0 W/35.0 W 7.2 W 14.0 WNoise level 46/49 dB (A) 42 dB (A) 52/48 dB (A) 52 dB (A)Temperature range –10°C to +55°CColour RAL 70353)
Protection category to EN 60 529IP 54 standard IP 55 when using an additional fine filter mat IP 56 when using an additional fine filter mat and hose-proof hood
Model No. SK outlet filter 3323.207 3325.207
Accessories Packs of PageSpare filter mats 5 3171.100 3172.100 191 Fine filter mats 5 3181.100 3182.100 191 Thermostat 1 3110.000 178 Temperature indicator 1 3114.100 3114.115 3114.024 – 3114.100 3114.115 3114.024 – 177 Speed control 1 3120.000 3120.115 – – 3120.000 3120.115 – – 179 Hose-proof hood 1 3323.800 3324.800 193
1) Delivery times available on request. 2) For metal thickness > 2.5 mm, the cut-out B2/H2 must be 1 mm larger. 3) RAL 7032 on request. Special voltages available on request. We reserve the right to make technical modifications.
45Rittal System Climate Control
Accessories Page 171 EMC-protected design Page 48 Configuration software Page 195
Fan-and-filter uAir throughput 230 m3/h
Fan-
a
nits
H2
B2
T2
B1
T1
H1
B = WidthT = Depth
nd-f
ilter
uni
ts
Su
pply includes:Fan-and-filter units ready for installation, including filter mats.German registered design no. M 93 04 846
Approvals, see page 272.
Performance diagrams, available on the Internet.
Model No. SK fan-and-filter unit 3325.107 3325.117 3325.027 3325.0471)
Rated operating voltage V/Hz 230, 50/60 115, 50/60 24 (DC) 48 (DC)
Dimensions in mmB1/H1 255B2/H2 2242)
T1 12.5Max. installation depth mm T2 105Air throughput, unimpeded air flow 230/265 m3/h 230 m3/h
Air throughput with outlet filter including standard filter mat
1 x SK 3325.207: 170/205 m3/h 2 x SK 3325.207: 200/230 m3/h 1 x SK 3326.207: 190/215 m3/h
Axial fan Self-starting shaded pole motor DC motor
Rated current max. 0.28 A0.24 A
0.53 A0.49 A 0.59 A 0.31 A
Power 41.0 W/38.0 W 14.0 W 15.0 WNoise level 54/56 dB (A) 54 dB (A)Temperature range –10°C to +55°CColour RAL 70353)
Protection categoryto EN 60 529
IP 54 standard IP 55 when using an additional fine filter mat IP 56 when using an additional fine filter mat and hose-proof hood
Model No. SK outlet filter 3325.207
Accessories Packs of PageSpare filter mats 5 3172.100 191 Fine filter mats 5 3182.100 191 Thermostat 1 3110.000 178 Temperature indicator 1 3114.100 3114.115 3114.024 – 177 Speed control 1 3120.000 3120.115 – – 179 Hose-proof hood 1 3324.800 193
1) Delivery times available on request. 2) For metal thickness > 2.5 mm, the cut-out B2/H2 must be 1 mm larger. 3) RAL 7032 on request. Special voltages available on request. We reserve the right to make technical modifications.
46 Rittal System Climate Control
Accessories Page 171 EMC-protected design Page 48 Configuration software Page 195
Air throughput 550/700 m3/h
Fan-and-filter units
nd-f
ilter
uni
ts
H2
B2
T2
B1
T1
H1
B = WidthT = Depth
Su
Fan-
a
pply includes:Fan-and-filter units ready for installation, including filter mats.
German registered design no. M 93 04 846
Approvals, see page 272.
Performance diagrams, available on the Internet.
Model No. SK fan-and-filter unit 3326.107 3326.117 3327.107 3327.117 3327.147
Rated operating voltage V/Hz 230, 50/60 115, 50/60 230, 50/60 115, 50/60 400/460, 3~, 50/60
Dimensions in mmB1/H1 323B2/H2 2921)
T1 12.5Max. installation depth mm T2 129 145Air throughput, unimpeded air flow 550/600 m3/h 700/720 m3/h
Air throughput with outlet filter including standard filter mat
1 x SK 3326.207: 360/390 m3/h 2 x SK 3326.207: 440/495 m3/h 1 x SK 3326.207: 525/575 m3/h
Axial fan Capacitor motor Rotary current motor
Rated current max. 0.29 A0.35 A
0.58 A0.70 A
0.65 A0.95 A
1.5 A2.0 A
0.27 A0.37 A
Power 64.0 W/80.0 W 115.0 W/212.0 W 167.0 W/230.0 W 146.0 W/220.0 WNoise level 59/61 dB (A) 75/76 dB (A)Temperature range –10°C to +55°CColour RAL 70352)
Protection category to EN 60 529
IP 54 standard IP 55 when using an additional fine filter mat IP 56 when using an additional fine filter mat and hose-proof hood
Model No. SK outlet filter 3326.207
Accessories Packs of PageSpare filter mats 5 3173.100 3327.700 191 Fine filter mats 5 3183.100 191 Thermostat 1 3110.000 – 178 Temperature indicator 1 3114.100 3114.115 3114.100 3114.115 – 177 Speed control 1 3120.000 3120.115 3120.000 – – 179 Hose-proof hood 1 3326.800 193
1) For metal thickness > 2.5 mm, the cut-out B2/H2 must be 1 mm larger. 2) RAL 7032 on request. Special voltages available on request. We reserve the right to make technical modifications.
47Rittal System Climate Control
Accessories Page 171 EMC-protected design Page 48 Configuration software Page 195
Fan-
and-
filte
Fan-and-filterAir throughput 20 – 1
units – EMC05 m3/h
T1
B T =
H2
B2
T2
B1
H1
= Width Depth
r un
its –
EM
C
Su
pply includes:Complete fan-and-filter units ready for installation, including drilling template, filter mat and assembly parts.Approvals, see page 273.
Performance diagrams, available on the Internet.
Model No. SK fan-and-filter unit 3321.607 3321.6171) 3322.607 3322.6171) 3323.607 3323.6171)
Rated operating voltage V/Hz 230, 50/60 115, 50/60 230, 50/60 115, 50/60 230, 50/60 115, 50/60
Dimensions in mmB1/H1 116.5 148.5 204B2/H2 92 + 0.82) 1242) 1772)
T1 10 10.5 12.5Max. installation depth mm T2 42 57 82.5Air throughput, unimpeded air flow 20/25 m3/h 55/66 m3/h 105/120 m3/h
Air throughput with outlet filter including standard filter mat 1 x 3321.267: 15/18 m3/h
1 x 3322.267: 43/50 m3/h2 x 3322.267: 48/55 m3/h1 x 3323.267: 48/55 m3/h
1 x 3323.267: 71/82 m3/h2 x 3323.267: 85/98 m3/h1 x 3325.267: 78/90 m3/h
Axial fan Self-starting shaded pole motor
Rated current max. 69 mA/ 58 mA
138 mA/ 115 mA
0.12 A/ 0.11 A
0.24 A/ 0.23 A
0.12 A/ 0.11 A
0.24 A/ 0.23 A
Power 12.5 W/10.3 W 19.0 W/18.0 WNoise level 41/46 dB (A) 46/49 dB (A)Temperature range –10°C to +55°CColour RAL 70353)
Protection category to EN 60 529 IP 54 standardModel No. SK outlet filter – EMC 3321.267 3322.267 3323.267
Accessories Packs of PageSpare filter mats 5 3321.700 3322.700 3171.100 191 Fine filter mats 5 – 3181.100 191 Thermostat 1 3110.000 178 Temperature indicator 1 3114.100 3114.115 3114.100 3114.115 3114.100 3114.115 177 Speed control 1 3120.000 3120.115 3120.000 3120.115 3120.000 3120.115 179 Hose-proof hood 1 3321.800 3322.800 3323.800 193
1) Delivery times available on request. 2) For metal thickness > 2.5 mm, the cut-out B2/H2 must be 1 mm larger. 3) RAL 7032 on request. Special voltages available on request. We reserve the right to make technical modifications.
48 Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
T
BT
Air throughput 180 – 700 m3/h
Fan-and-filter units – EMC
r un
its –
EM
C
H2
B2
T2
B1
1
H1
= Width = Depth
Su
Fan-
and-
filte
pply includes:Complete fan-and-filter units ready for installation, including drilling template, filter mat and assembly parts.
Approvals, see page 273.
Performance diagrams, available on the Internet.
Model No. SK fan-and-filter unit 3324.607 3324.6171) 3325.607 3325.6171) 3326.607 3326.6171) 3327.607 3327.6171)
Rated operating voltage V/Hz 230, 50/60 115, 50/60 230, 50/60 115, 50/60 230, 50/60 115, 50/60 230, 50/60 115, 50/60
Dimensions in mmB1/H1 255 323B2/H2 2242) 2922)
T1 12.5 12.5Max. installation depth mm T2 105 129 145Air throughput, unimpeded air flow 180/160 m3/h 230/265 m3/h 550/600 m3/h 700/720 m3/h
Air throughput with outlet filter including standard filter mat
1 x 3325.267: 115/95 m3/h2 x 3325.267: 165/140 m3/h1 x 3326.267: 155/130 m3/h
1 x 3325.267: 170/205 m3/h2 x 3325.267: 200/230 m3/h1 x 3326.267: 190/215 m3/h
1 x 3325.267: 170/205 m3/h2 x 3325.267: 200/230 m3/h1 x 3326.267: 360/390 m3/h
1 x 3326.267: 525/575 m3/h
Axial fan Self-starting shaded pole motor Capacitor motor
Rated current max. 0.19 A/ 0.20 A
0.38 A/ 0.40 A
0.28 A/ 0.24 A
0.53 A/ 0.49 A
0.29 A/ 0.35 A
0.58 A/ 0.70 A
0.65 A/ 0.95 A
1.50 A/ 2.00 A
Power 30.0 W/35.0 W
41.0 W/38.0 W
64.0 W/80.0 W
155.0 W/212.0 W
167.0 W/230.0 W
Noise level 52/48 dB (A) 54/56 dB (A) 59/61 dB (A) 75/76 dB (A)Temperature range –10°C to +55°CColour RAL 70353)
Protection category to EN 60 529 IP 54 standardModel No. SK outlet filter – EMC 3325.267 3326.267
Accessories Packs of PageSpare filter mats 5 3172.100 3173.100 3327.700 191 Fine filter mats 5 3182.100 3183.100 191 Thermostat 1 3110.000 178 Temperature indicator 1 3114.100 3114.115 3114.100 3114.115 3114.100 3114.115 3114.100 3114.115 177 Speed control 1 3120.000 3120.115 3120.000 3120.115 3120.000 3120.115 3120.000 3120.115 179 Hose-proof hood 1 3324.800 3326.800 193
1) Delivery times available on request. 2) For metal thickness > 2.5 mm, the cut-out B2/H2 must be 1 mm larger. 3) RAL 7032 on request. Special voltages available on request. We reserve the right to make technical modifications.
49Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Rac
k-m
ount
ed/ta
ngen
tial f
ans,
fan
syst
ems
Rack-mounted/tangential fans, fan systems
All rack-mounted climate control components are fitted
directly onto the 482.6 mm (19˝) mounting level for
subracks. Positioning directly beneath the electronic
components ensures effective cooling, and prevents
the formation of hot-spots.
Ready-to-use, wired modules equipped with fans for
numerous Rittal enclosure system platforms offer
effective air throughput and minimal assembly work.
Fan roofs, door-mounted fans for server enclosures,
internal fan mounting panels and enclosure internal
fans are all available.
50 Rittal System Climate Control
Rittal System Climate Control
Rac
k-m
ount
ed/ta
ngen
tial f
ans,
fan
syst
ems
Rack-mounted fan moduleThe rack-mounted fan slides into the guide frame like a drawer. Connectors on the rear ensure immediate contact. Installation options for the guide frame: Directly in the subrack, via two mounting brackets on the 482.6 mm (19˝) mounting angles. Ideal for avoiding hot-spots in fully populated enclosures.
Tangential fans320 m3/h air throughput, 2 UThe high air throughput means that Rittal tangential fans are capable of dissipating large heat losses from the enclosure. The minimal noise generation of 52 dB creates a pleasant working environment. Front outlet grille 2 U for hot air outlet to the outside in the upper section of the enclosure.
For the office sector: Roof-mounted fanLow noise generation and high performance for sensitive office areas. Unit consisting of TS roof plate and fan.
Benefits at a glanceRack-mounted/tangential fans ● Rapid installation on 482.6 mm (19˝)
mounting levels● Direct, effective dissipation of heat loss,
thanks to positioning beneath the assemblies
● No externally mounted equipment to disrupt the aesthetic appearance of the enclosure
Fan systems ● Fast assembly● Targeted air routing to avoid hot-spots● Perfect system integration
Tips and tricksApplications see page 201
51
Rac
k-m
Rack-mountedfor 482.6 mm (19˝), air t
fanshroughput 320/480 m3/h
482.6 (19˝)
180200
73
410
100
1 HE
1
426482.6 (19˝)
206214
55
432
120
1 HE
2
ount
ed fa
ns
Ra
ck-mounted fan/Vario rack-mounted fan supply includes: Wired unit ready for connection, including terminal strip and assembly parts.Guide frame supply includes: Guide frame including connec-tor and fitted connection cable (3 m), bracket for optional attachment to the 482.6 mm (19˝) system, assembly parts.
Also required:
Remember to order the appropriate guide frame for your chosen application.
Approvals, see page 273.
Detailed drawing,see page 240.
Performance diagrams, available on the Internet.
Rack-mounted fans Vario rack-mounted fans
Model No. SK Model No. SK
2 fans Distance between axes 85 mm 3340.0241) 3340.1151) 3340.230 – – 3350.0241) 3350.1151) 3350.2301) –
3 fans Distance between axes 85 mm 3341.0241) 3341.115 3341.230 – 9769.0021)2) 3351.0241) 3351.1151) 3351.230 –
3 fans Distance between axes 105 mm 3342.024 3342.1151) 3342.230 3342.5002)3) – 3352.0241) 3352.1151) 3352.230 3352.5003)
Rated operating voltage V 24 V (DC) 115 V (AC) 230 V (AC)24 V (DC) 115 – 230 V (AC)
36 V (DC) up to 72 V (DC)
24 V (DC) 115 V (AC) 230 V (AC)24 V (DC) 115 – 230 V (AC)
Model No. SKmatching guide frame – – – – – 3356.1001) 3355.100 3355.100 3357.100
Accessories PageTemperature indicator230 V (AC) 714 3114.100 3114.115 3114.100 3114.024 – 3114.100 3114.115 3114.100 3114.024
Thermostat 715 3110.000Speed control 716 3120.000 3120.115 3120.000 – – 3120.000 3120.115 3120.000 –
1 2
Technical specifications
3341.230 3341.115 3341.024
Model No. SK/CS 3340.230 3350.230
3340.115 3350.115
3340.024 3350.024
3351.230 3342.230 3352.230
3351.115 3342.115 3352.115
3351.024 3342.024 3352.024
3342.5002) 3352.5002) 9769.002
Rated operating voltage V, Hz
AC 230 V 50/60 Hz
AC 115 V 50/60 Hz
DC 24 V –
AC 230 V 50/60 Hz
AC 115 V 50/60 Hz
DC 24 V –
DC 24 V AC 115 – 230 V 50/60 Hz
36 V (DC) up to 72 V (DC)
Rated current max. 0.24 A/ 0.22 A
0.46 A/ 0.46 A 0.49 A 0.36 A/
0.33 A0.69 A/ 0.69 A 0.74 A 0.85 A 0.28 A
Pre-fuse T 6.0 A 6.0 ANumber of fans 2 3 3Air throughput, unimpeded air flow 320 m3/h 480 m3/h 250 m3/h
Temperature range –10°C to +55°C –33°C to +55°C
Noise level 51 dB (A) 52 dB (A) 51 dB (A) 51 dB (A) 52 dB (A) 51 dB (A) 52 dB (A)1) Delivery times available on request. 2) Rack-mounted fan for metric mounting angles available on request. 3) Version with monitoring
52 Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
for 482.6 m
88
482.6 (19
163 17
m (19˝), air throughput 320 m3/h
Tangential fans
ngen
tial f
ans
˝)
380
Su
Ta
pply includes:Fully assembled and wired unit, ready for connection, including filter mat.
Approvals, see page 274.
Detailed drawing,see page 240.
Performance diagrams, available on the Internet.
Model No. SK 3145.000 3144.000
Rated operating voltage V/Hz 115, 50/60 230, 50/60
Dimensions in mmWHD
482.6 (19˝) 88 (2 U) 158
Air throughput, unimpeded air flow 320 m3/h
Rated current max. 0.32 A 0.16 APower 37 WNoise level 52 dB (A)Speed 2245 rpm–1
Temperature range –10°C to +55°CMaximum static pressure difference 65 – 70 PaAccessories Packs of PageTemperature indicator 1 3114.115 3114.100 177 Thermostat 1 3110.000 178 Filter mats 5 3177.000 189 Front outlet grille 2 U 1 3176.000 193 Roof vent 1 3148.007 54 Speed control 1 3120.115 3120.000 179
Special voltages available on request. We reserve the right to make technical modifications.
53Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Fan systems
54
Fan
syst
ems
RTT roof-mounted fan and vent attachmentfor TSThe active roof-mounted fan and the passive vent attachment (TS 8801.380) integrate perfectly into the system-wide mounting concept of the Rittal TopTherm platform. They fit precisely onto the cut-outs of the small and medium performance cate-gory of TopTherm roof-mounted cooling units.
Of course, they may also be mounted on any suffi-ciently large roof surface.
TS roof plates with prepared mounting cut-outs are additionally available.
Roof-mounted fan supply includes: Unit ready to connect with built-in radial fan, sealing material and assembly parts.
Vent attachment: see page 182.
Protection category:IP 43 to EN 60 529
Detailed drawing, see page 240.
3149.410 3149.420 3149.440 3149.810 3149.820 3149.840 8801.380 Page
Model No. SKRated operating voltage V/Hz 115, 50/60 230, 50/60 400, 3~, 50/60460, 3~, 60 115, 50/60 230, 50/60 400, 3~, 50/60
460, 3~, 60 Roof vent
Air throughput, unimpeded air flow 400 m3/h 800 m3/h Without motor
Required mounting cut-out W x D mm 475 x 260 490 x 390Power consumption of fan 120 W/170 W 95 W/140 W 170 W/225 W 180 W/310 WRated current of fan 1.1/1.6 A 0.55/0.88 A 0.35/0.35 A 1.5/2.2 A 0.75/1.1 A 0.35/0.55 ATemperature range –10°C to +55°CNoise level 68/69 dB (A) 69/70 dB (A)Weight 10 kg 11 kg 6 kgColour shade RAL 7035Accessories
Roof plate 600 x 600 mm for TS 8 with cut-out 8801.300 8801.310 181 Roof plate 600 x 800 mm for TS 8 with cut-out 8801.320 8801.330 181 Roof plate 1200 x 600 mm for TS 8 with cut-out – 8801.350 181 Temperature indicator 3114.115 3114.100 – 3114.115 3114.100 – – 177 Speed control 3120.115 3120.100 – 3120.115 3120.100 – – 179
Roof-mounted fan● The roof-mounted fan is easily installed using
6 screws. The sealing tape supplied can be used to seal it against the enclosure.
● The attachment screws are invisible from the outside.
● The roof-mounted fan casing has a large air outlet surface and labyrinth air ducting.
Protection category:IP 43 to EN 60 529. By additionally installing the filter holder with filter mat SK 3175.000, with roof vent SK 3148.007 a protection category of IP 44 is achieved.
Fully wired unit ready for connection with built-in radial fan, sealing material and assembly parts, connection cable (3 m), drilling template.
Accessories:
Filter holder,see page 194.
Detailed drawing, see page 240.
Model No. SK 3149.007 3169.007 3148.007
Rated operating voltage V/Hz 230, 50/60 115, 50/60 Without fan motorAir throughput 360 m3/h
Rated current max. 0.2 A 0.55 APower consumption 42 W 65 WTemperature range –10°C to +60°CNoise level 53 dB (A)Weight 7.8 kgColour1) RAL 7035, textured enamel
1) To order the version in RAL 7032, please add extension .000 to the Model No. Special voltages available on request. We reserve the right to make technical modifications.
TB
290500
370 550
125
B = WidthT = Depth
50
265345
340 420
Rittal System Climate Control
Fan systems
Fan
syst
ems
55Rittal System Climate Control
Roof-mounted fanfor TS/FR(i) for the office sectorThis new roof ventilation concept offers a wealth of performance, assembly and cost benefits associated with the use of integrated ventilation systems. This roof-mounted fan may be ordered with and without a roof plate. Another outstanding feature is the enormous volumetric flow in propor-tion to exceptionally low noise levels, making it ideal for use in sensitive office areas.
Technical specifications: ● Fitted onto a roof plate based on TS.● Easy assembly; mounting cut-outs have been
provided.● Radial fan.
Supply includes:Fully wired ready for connection, including assembly parts.
T
H
B
511 511
410450450
410
H
13.5
T B
20
2424
225
205
410
450
Ø 6.5(8x)
Model No. SK 3164.610 3164.620 3164.810 3164.820 3164.115 3164.230 PageRated operating voltage V/Hz 115, 50/60 230, 50/60 115, 50/60 230, 50/60 115, 50/60 230, 50/60 Air throughput (unimpeded air flow) 1500 m3/h1)
Version With roof plate without roof plate
Dimensions in mmWHD
800 240 800
800 240 900
511 227 511
Power consumption 68 W/81 WRated current 0.6 A/0.7 A 0.3 A/0.35 A 0.6 A/0.7 A 0.3 A/0.35 A 0.6 A/0.7 A 0.3 A/0.35 ARadial fan –Noise level 40 dB (A)Temperature range +20°C to +55°CColour RAL 7035Accessories
Temperature indicator in 1 U patch panel 7109.035 177 Temperature indicator 3114.115 3114.100 3114.115 3114.100 3114.115 3114.100 177 Thermostat 3110.000 178
1) 800 m3/h at 40 Pa counterpressure using two integrated louvres, type DK 7825.801, in the enclosure base/plinth. Special voltages available on request. We reserve the right to make technical modifications.
Mounting cut-out only required for fans wtihout roof plate
B = WidthT = Depth
Enclosure internal fanfor TSTo prevent hot-spots and support the air routing of active enclosure climate control components. Adjustable in two axes. Attached to the TS 8 frame section. Several fans may be cascaded using the quick-release clamping strip.
Supply includes:Fully wired unit ready for connection with radial fan and lockable swivel device, as well as assembly parts.
213.5
100
120
Ø 6
(2x)
Air through-put (unim-peded air
flow)
Power consump-
tionW
Rated current
A
Rated voltageV, Hz
Model No. SK
160 m3/h 19.0/18.0 0.12/0.11 230, 50/60 3108.100
160 m3/h 19.0/18.0 0.24/0.23 115, 50/60 3108.115
160 m3/h 3.5 0.15 24 V (DC) 3108.024
Fan systemsFa
n sy
stem
s
Fan mounting plate for TSThe fan mounting plate may be retro-fitted in all TS 8 network enclosures from above. The plate is mounted at the front of the enclosure, whilst the rear section is left free for cable entry. A rubber cable clamp strip is supplied loose for optional sealing at the rear.
The following combinations are also possible:
● Solid roof plate raised with 20 or 50 mm roof spacers.
● Roof plate for cable entry raised with 20 or 50 mm roof spacers.
● Vented roof plate for cable entry.
In conjunction with the large swing frame, usage is only possible from an enclosure depth of 800 mm, in conjunction with a roof plate for cable entry from 900 mm.
Note:Not suitable for crane transportation. Not suitable for combination with 482.6 mm (19˝) mounting frame.
The air throughput can be increased with the fan expansion kit DK 7980.000.
Technical specifications for one fan: Rated operating voltage: 230 V Power consumption: 15/14 W at 50/60 Hz Air throughput (unimpeded air flow): 160/180 m3/h, 50/60 Hz Temperature range: –10°C to +55°C
Technical specifications of thermostat: Rated operating voltage: 250 V Temperature range: +5°C to +55°C
Colour:RAL 7035
Supply includes:2 fans, 2/4 cut-outs to extend to 4/6 fans, thermostat, rubber cable clamp strip. Thermostat and fan fully wired to connection cable (2.5 m).
Accessories:
Fan expansion kit, see page 56. Rubber cable clamp strip SZ 2573.000 for sealing at the sides and targeted air routing when bayed, see Cat. 32 page 1047.
385/585525/725
40
For enclosuresNumber of fans
Max. number of
fans
Model No. DKWidth
mmDepth mm
600 600 2 4 7966.035
600
800900
10001200
2 6 7968.035
800 600 2 6 7986.035
800
800900
10001200
2 6 7988.035
Fan expansion kitFor retro-fitting various fan units or to supplement the fan mounting plate and modular fan roof.
Technical specifications DK 7980.000: Rated operating voltage: 230 V~ Power consumption: 15/14 W at 50/60 Hz Air throughput (unimpeded air flow): 160/180 m3/h, 50/60 Hz Noise level (unimpeded air flow): 37 dB (A) Temperature range: –10°C to +55°C
Technical specifications DK 7980.100: Rated operating voltage: 230 V~ Power consumption: 14/12 W at 50/60 Hz Air throughput (unimpeded air flow): 108/120 m3/h, 50/60 Hz Noise level (unimpeded air flow): 34 dB (A) Temperature range: –20°C to +70°C
Technical specifications DK 7980.148: Rated operating voltage: 48 V (DC) Power consumption: 7.7 W Air throughput (unimpeded air flow): 184 m3/h Noise level (unimpeded air flow): 43 dB (A) Temperature range: –20°C to +70°C
Supply includes:Fan, including assembly parts and connection cable (0.61 m).
Dimensions W x H x D mm Packs of Model No. DK
119 x 119 x 38 1 set 7980.000
119 x 119 x 25 1 set 7980.100
119 x 119 x 25 1 set 7980.148
56 Rittal System Climate Control
Fan systems
Fan
syst
ems
Cover plates for fan panelsfor FlatBox To cover unused fan panels when using fans in the FlatBox.
Material:Sheet steel
Surface finish:Powder coated in RAL 7035
Supply includes:Assembly parts.
Packs of Model No. DK
6 7507.760
Fan mounting plate DC for TS
Super-low noise thanks to FCS speed control, fully fittedSuitable for TS 8 enclosures with a raised roof (> 20 mm) or TS 8 roof plate, vented. The fan mounting plate may be used as an alternative to fan mounting plate 7988.035. It is installed from above. Cable entry is prepared in the rear section of the plate.Not suitable for combination with 482.6 mm (19˝) mounting frame.
Advantages of the DC fan mounting plate with FCS technology: ● Super-low noise thanks to speed control.● All fans are monitored for failure.● High air throughput thanks to DC technology
(unimpeded airflow 6 x 175 m3/h = 990 m3/h).● EMC compatibility.● Temperature monitoring and control.● High level of safety (low safety voltage with
24 V DC power supply).● Visual and acoustic alarm messages, plus relay
alarm output.● Freely selectable installation location for the
FCS control unit (included with the supply of the fan mounting plate, in 482.6 mm (19˝) with 7320.440 or on the frame with 7320.450).
● Suitable for international use, thanks to wide-range power supply 100 – 240 V AC and socket to IEC 320.
● Pre-configured.● Network-compatible via CMC-TC processing
unit II 7320.100 (all relevant data such as temperature etc. are displayed in the web browser, or alarms are sent in the form of an SNMP trap).
Technical specifications:Power pack rated voltage: 100 – 240 V AC, 50/60 Hz Power supply rated current: max. 1.5 A Power supply secondary range: 24 V DC, 3 A Temperature range: +5°C to +40°C Total air throughput (unimpeded air flow): 6 x 175 m3/h = 990 m3/h
Technical specifications for one fan: Rated voltage: 24 V DC Rated current: max. 0.3 A Air throughput (unimpeded air flow): 175 m3/h Speed: 2650 rpm Noise level: up to 45 dB (A) at maximum speed activation
Also required:
Connection cable 230/115 V. Example D version, Model No. 7200.210,see Cat. 32, page 818.
Accessories:
1 U mounting unit, Model No. 7320.440,see Cat. 32, page 821. Mounting module, Model No. 7320.450,see Cat. 32, page 821.
For enclosures
width mm
For enclosures
depth mm
Number of DC fans
Model No. DK
800800 900 1000
6 7858.488
Note:For more information on the FCS system, see Cat. 32, page 813.
57Rittal System Climate Control
Fan systemsFa
n sy
stem
s
58 Rittal System Climate Control
Fan roof, modular, two-piecefor TS, FR(i) The modular roof plate consists of individual com-ponents and can be configured for the ventilation of the enclosures in various ways. The modules consist of:
Roof plate, two-piece with cut-out For fan mounting and cable entry at the rear via a sliding angular bracket with rubber cable clamp strip. Replacing the existing roof plate. The two-piece design allows convenient retrofitting of cables at any time.
Cover plate To cover the cut-out, optionally solid or vented options. The top-mounted cover plate may be raised for extra air throughput using the supplied spacers.
Fan insert For active ventilation:A fully pre-wired fan tray including 2.5 m connec-tion cable, with two fan motors and additional cut-outs. The air throughput may be increased with a fan expansion kit.
Material:Sheet steel, spray finished
Colour:RAL 7035
Technical specifications for one fan: Rated operating voltage: 230 V Power consumption: 15/14 W at 50/60 Hz Air throughput (unimpeded air flow): 160/180 m3/h at 50/60 Hz Temperature range: –10°C to +55°C
Detailed drawing,see page 241.
Accessories:
Fan expansion kit DK 7980.000, see page 56. Thermostat SK 3110.000, see page 178. Speed control SK 3120.000, see page 179.
1
2
1 2
3 45
For enclosuresModel No. DK
Fan insertRoof plate FR(i)
Roof plate TS Cover plate
Width mm
Depth mm With
cut-out With
cut-out Solid Vented Fan insert
Fans pre-wired
Maximum no. of fans
600 600 7856.3661) 7826.366 2102.1801) 2102.400 2102.320 2 2600 800 7856.3681) 7826.368 2102.1901) 2102.410 2102.490 2 6600 900 – 7826.369 2102.1901) 2102.410 2102.490 2 6600 1000 7856.3601) 7826.360 2102.1901) 2102.410 2102.490 2 6600 1200 7856.3621) 7826.362 2102.1901) 2102.410 2102.490 2 6800 600 – 7826.486 7885.100 7885.200 7885.000 2 3800 800 7856.3881) 7826.488 7886.100 7886.200 7886.000 2 8800 900 – 7826.489 7886.100 7886.200 7886.000 2 8800 1000 7856.3801) 7826.480 7886.100 7886.200 7886.000 2 8800 1200 – 7826.382 7886.100 7886.200 7886.000 2 8
1) Delivery times available on request. Design panel FR(i) already included with the supply of the standard roof plate.
1 2 4 5 3
Fan unit, active for TEFor active ventilation of the TE 7000. The fan unit is installed in the prepunched cut-out. An additional fan may optionally be integrated.
Supply includes:Fan unit including assembly parts, 2 fans, 1 thermostat and open connection cable.
Technical specifications for one fan: Fan extension kit, 7980.000, see page 56.
Technical specifications of thermostat: Rated operating voltage: 250 V Temperature range: +5°C to +55°C
Note:Connection via distributor box or country-specific connector.
Accessories:
Fan expansion kit, see page 56.
For enclosures W x D mm
Number of pre-wired
fans
Possible number of
fans
Model No. TE
All dimensions 2 3 7000.670
Active kit for TEconsisting of fan unit including thermostat, com-plete, wired ready for connection, socket strip (DK 7000.630) for up to 8 earthing pin plugs, version D and connection cable (DK 7200.210).
Packs of Model No. DK
1 set 7000.680
Fan systems
Fan
syst
ems
Door-mounted fanfor server enclosures TS, TE
Specifically for installing in perforated doors. The growing packaging density in data communications and network enclosures make active, direct ventilation of the enclosure indispen-sable. The door-mounted fan, which is attached to the rear or front door, supports horizontal air rout-ing via the servers and therefore facilitates faster heat dissipation from active components.
Technical specifications: ● Standard assembly with two fans.● Air throughput, unimpeded air flow 600 m3/h. ● By adding two fan extension kits, the air
throughput is increased to 1200 m3/h. ● The direction of air flow is easily reversed by
rotating the fan.● Several units may be positioned in a cascade
arrangement. ● Simple mounting on the tubular door frame.
Supply includes:Wired ready for connection with 2.5 m connection cable, including assembly parts.
Accessories:
Fan expansion kit, see page 59.
Note:Only for mounting on the tubular door frame!
Door configuration for installation in 2 and 4-door ISP racks available on request.
B
T
H 552
27 230 (350)
Ø 4.5
475 (675)
493 (693)
606
9
59.5
5
Model No. SK 3165.6241) 3165.6481) 3165.6151) 3165.630 3165.8241) 3165.8481) 3165.8151) 3165.830 PageRated operating voltage V/Hz 24 (DC) 48 (DC) 115, 50/60 230, 50/60 24 (DC) 48 (DC) 115, 50/60 230, 50/60 Air throughput (unimpeded air flow) 600 m3/h
Power consumption for two fans 40 W 48 W 70 W/64 W 70 W/70 W 40 W 48 W 70 W/64 W 70 W/70 WRated current of fan 1.5 A 1.0 A 0.76 A/0.72 A 0.38 A/0.36 A 1.5 A 1.0 A 0.76 A/0.72 A 0.38 A/0.36 A
Dimensions in mm WHD
493 606 64.5
693 606 64.5
For doors with width (mm) 600 800Noise level 55 dB (A)Temperature range +20°C to +55°CColour RAL 7035Accessories
Temperature indicator 3114.024 – 3114.115 3114.100 3114.024 – 3114.115 3114.100 177 Thermostat 3110.000 178
1) Delivery times on request.Special voltages available on request. Technical modifications reserved.
B = WidthT = Depth
Fan expansion kitfor door-mounted fanTo increase the air throughput of the door-mounted fan.
To fit door-mounted fan Model No. SK
SK 3165.624, SK 3165.824 3165.024
SK 3165.648, SK 3165.848 3165.048
SK 3165.615, SK 3165.815 3165.115
SK 3165.630, SK 3165.830 3165.230
Rittal System Climate Control
59Air
/air
hea
t exc
hang
ers
Air/air heat exchangers
The requirement for using air/air heat exchangers is
that the ambient temperature must be below the
required enclosure internal temperature. Dust and any
aggressive ambient air is unable to ingress the
enclosure interior, thanks to the two separate air
circuits.
60 Rittal System Climate Control
Air
/air
hea
t exc
hang
ers
Platform strategy/installationIdentical installation cut-outsfor various output classes.
Easily retrofittedThanks to the low weight, simple assembly cut-outs and problem-free attachment of the heat exchangers, a cabinet or enclosure is easily retro-fitted.
Rittal System Climate Control
Simple maintenanceThe heat exchanger unit is very easily removed and cleaned. The cleverly thought-out structure enables fast, economical main-tenance.
SafetyHigh protection categoryThanks to the seamlessly sealed heat exchanger module, a protection category of IP 54 to EN 60 529 is achieved.
High load capacityThe motors of the fans are equipped with thermal winding protection.
Top quality: Guaranteed protection for your electronics.All devices in the Rittal TopTherm-Plus series are tested in accordance with the interna-tionally valid approvals (GS, UL).
Benefits at a glance● Specific thermal output from 17.5 W/K to
90 W/K● External and internal circuit may be
controlled separately● Mounting cut-outs and enclosure
dimensions identical to TopTherm wall-mounted cooling units
● Suitable for external and internal mounting
● Top design identical to TopTherm wall-mounted cooling units
ImportantThe temperature difference between the room temperature and enclosure internal temperature will have a decisive effect on the heat loss that may be dissipated.
Tips and tricksApplications see page 202
Selection criteria see page 203
Assembly see page 204
Air routing see page 205
Electrical connection and control see page 206
61
Air/air heat exchaWall-mounted
ngers
T
H
B
B
H
T
B
H
T
B = WidthT = Depth
Air
/air
hea
t exc
hang
ers
Supply includes:Fully wired unit readnection.
Detailed drawing,see page 241.
Performance diagravailable on the Inte
y for con-
ams, rnet.
SK 3125.800Compact wall-mounted air/air heat exchanger. Ideal for small enclosures and command panels. Suitable for external and inter-nal mounting.
SK 3129.800Super-slimline air/air heat exchangers. Ideal for external door mounting.
Model No. SK 3125.800 3129.800
Rated operating voltage V/Hz 230, 1~, 50/60
Dimensions in mm WHD
200400146
4001360110
Specific thermal output 12 W/K 62 W/K
Fans 2 per heat exchangerMax. rated current per fan 0.11 A/0.13 A 0.45 A/0.55 APre-fuse T 2.0 AOutput per fan 25 W/30 W 100 W/130 W
Air throughput of fans (unimpeded air flow) External circuit 265 m3/h / 315 m3/h 860 m3/h / 900 m3/hInternal circuit 265 m3/h / 315 m3/h 860 m3/h / 900 m3/h
Temperature range –5°C to +55°CType of connection Connection cableWeight 8 kg 30 kgColour RAL 7035Protection category to EN 60 529 Internal circuit IP 54Accessories Packs of PageThermostat 1 3110.000 178 Temperature display 1 3114.100 177 Speed control 1 3120.000 179
Special voltages available on request. We reserve the right to make technical modifications.
62 Rittal System Climate Control
Accessories Page 171 Recooling systems From page 116 Configuration software Page 195
Wall-mounted with controller
Air/air heat exchangers
Air
/air
hea
t exc
hang
ers
T2
50
950
T1400108
42
550
150
280
1580
215400 165
50
T = Depth
● With controller atemperature disp
● Floating fault sigin case of overte
nd digital lay nal contact mperature
Supply includes:Fully wired unit ready for con-nection.
Approvals, see page 276.
Detailed drawing,see page 244.
Performance diagrams, available on the Internet.
Model No. SK 230 V 3126.100 3127.100 3128.100 3129.100 3130.100
115 V 3126.115 3127.115 3128.115 3129.115 3130.115
Rated operating voltage V/Hz 230/115, 1~, 50/60
Dimensions in mm
WHT1T2
280550150–
400950205155
400950225175
4001580215–
Specific thermal output 17.5 W/K 30 W/K 45 W/K 60 W/K 90 W/K
Fans 2 per heat exchanger
Max. rated current per fan 230 V 0.11 A/0.13 A 0.28 A/0.34 A 0.3 A/0.4 A 0.38 A/0.4 A 0.67 A/0.88 A115 V 0.23 A/0.25 A 0.55 A/0.7 A 0.6 A/0.8 A 0.65 A/0.8 A 1.3 A/1.8 A
Pre-fuse T 2.0 A 4.0 AOutput per fan 23 W/27 W 60 W/75 W 70 W/90 W 85 W/90 W 150 W/200 W
Air throughput of fans (unimpeded air flow)
External circuit 265 m3/h / 315 m3/h 480 m3/h / 525 m3/h 600 m3/h / 625 m3/h 860 m3/h / 900 m3/h 850 m3/h / 945 m3/hInternal circuit 265 m3/h / 315 m3/h 480 m3/h / 525 m3/h 600 m3/h / 625 m3/h 860 m3/h / 900 m3/h 850 m3/h / 945 m3/h
Temperature range –5°C to +55°CType of connection Plug-in terminal stripWeight 10 kg 18 kg 19 kg 21 kg 34 kgColour RAL 7035Protection category to EN 60 529 Internal circuit IP 54Accessories Packs of PageFilter mats 3 3286.300 3286.400 189 Metal filters 1 3286.310 3286.410 190
Special voltages available on request. We reserve the right to make technical modifications.
63Rittal System Climate Control
Accessories Page 171 Recooling systems From page 116 Configuration software Page 195
Air/air heat exchangWall-mounted, railway-compat
64
Air
/air
hea
ersible version
H
T1B T1
External mounting
Partial internal mounting1)
Internal mounting
B = WidthT = Depth
t exc
hang
ers
Rittal air/air h
eat exchangers in a railway-compatible version are used specifically in the mobile railway engineering sector, e.g. for local trains, locomotives and high-speed trains. Products are available both in 24 V DC and in 110 V DC.Railway-compatible design of the units includes construction to EN 50 155, halogen-free con-nection cables, screw protec-tion, shock and vibration testing to EN 61 373, preparation for EN 45 545, and spray-finishing in RAL 7035 S to DB TL 918340, among other things.
Benefits, technical details:● External and internal fans may
be controlled separately● Simple maintenance
Supply includes:Fully wired unit ready for connection.
Detailed drawing, see page 242/243.
Model No. SK 3126.424 3128.424 3129.424 3130.424 3126.410 3128.410 3129.410 3130.410
Rated operating voltage 24 V (DC) 24 V (DC) 24 V (DC) 24 V (DC) 110 V (DC) 110 V (DC) 110 V (DC) 110 V (DC)
Dimensions in mm BH
T1
280650127
400950140
400950150
4001580150
280650127
400950140
400950150
4001580150
Specific thermal output 27 W/K 47 W/K 66 W/K 98 W/K 27 W/K 47 W/K 66 W/K 98 W/K
Max. rated current per fan 2.7 A 7.5 A 10.5 A 9.2 A 2.7 A 1.9 A 2.47 A 2.3 A Output per fan 65 W 180 W 240 W 220 W 65 W 203 W 256 W 230 W
Air throughput of fans (unimpeded air flow)
External circuit 360 m3/h 560 m3/h 1055 m3/h 1125 m3/h 360 m3/h 560 m3/h 1055 m3/h 1125 m3/hInternal circuit 360 m3/h 560 m3/h 1055 m3/h 1125 m3/h 360 m3/h 560 m3/h 1055 m3/h 1125 m3/h
Temperature range –5°C to +55°CWeight 10 kg 16 kg 18 kg 25 kg 12.5 kg 18.5 kg 20.5 kg 27.5 kgColour RAL 7035Protection category to EN 60 529 Internal circuit IP 54
Accessories Packs of PageAdjustable frame 1 3286.260 3286.270 3286.270 3286.280 3286.260 3286.270 3286.270 3286.280 183 Metal filters 1 3286.230 3286.240 3286.240 3286.250 3286.230 3286.240 3286.240 3286.250 190
Delivery times available on request. We reserve the right to make technical modifications. 1) Partial installation is only supported with an adjustable frame (see accessories).
The requirement for using air/air heat exchangers is that the ambient tem-perature must be below the required enclosure internal temperature. Dust and any aggressive ambient air is unable to ingress the enclosure, thanks to the two separate air cir-cuits. Contamination of the outer circuit with coarse dust can be reduced via the use of optional metal filters. Attachment options: External mount-ing, internal mounting, partial inter-nal mounting via a special mounting frame.
Rittal System Climate Control
Roof-mounted
Air/air heat exchangers
t exc
hang
ers
T
H
B
B = WidthT = Depth
Application
Air
/air
hea
: These units are used specifi-cally if the doors or side panels must not be obstructed, or space must be kept clear for escape routes.
Technical design: ● The heat exchanger module
and the enclosure of the heat exchanger form a single unit, thereby substantially enlarg-ing the surface area for heat dissipation.
● This design gives the unit an extremely low weight (16.8 kg) combined with a high degree of enclosure rigidity.
● The built-in radial fans ensure effective air circulation, even where the enclosure is densely packed.
● All motors are equipped with thermal winding protection.
● As you would expect, the heat exchanger membranes are conductively connected to one another and thereby incorporated into the electri-cal safety features.
● The internal and external circuits can be connected separately; separate routing effectively prevents the ingress of dust, moisture and dirt.
Supply includes:Fully wired unit ready for connection. The fans are connected via two 3-wire connection cables, with wire end ferrules.
Detailed drawing, see page 241.
Model No. SK 3248.000
Rated operating voltage V/Hz 230, 1~, 50/60
Dimensions in mm WHD
595362440
Specific thermal output 66 W/K
Fans 2 per heat exchanger Max. rated current per fan 0.45 A/0.55 APre-fuse T 4.0 AOutput per fan 75 W
Air throughput of fans (unimpeded air flow)
External circuit 965 m3/hInternal circuit 965 m3/h
Temperature range –5°C to +55°CType of connection Connection cable Weight 16.8 kg Colour RAL 7035/9005 Protection category to EN 60 529 Internal circuit IP 54 Accessories Packs of PageTemperature display 1 3114.100 177 Thermostat 1 3110.000 178 Hygrostat 1 3118.000 178 Speed control 1 3120.000 179
Special voltages available on request. We reserve the right to make technical modifications.
65Rittal System Climate Control
Cooling units
Co
olin
g u
nit
s
Modular climate control concept from page 68
� � � Cooling modules . . . . . . . . . . . . . . . . . . . . . . . . . 1500/2500 W. . . . . . . . 70 � Section doors for installing cooling modules . . . . . . . . . . . . . . . . . . . . . . . 71
Roof-mounted cooling units from page 72
� � � � Roof-mounted cooling units . . . . . . . . . . . . . . . . . . 500/750 W. . . . . . . . 74 � � � � Roof-mounted cooling units . . . . . . . . . . . . . . . . . . . . . . 1000 W. . . . . . . . 75
� � � Roof-mounted cooling units . . . . . . . . . . . . . . . . 1100/3000 W. . . . . . . . 76 � � � � Roof-mounted cooling units . . . . . . . . . . . . . . . . 1500/2000 W. . . . . . . . 77 � � � � Roof-mounted cooling units . . . . . . . . . . . . . . . . 3000/4000 W. . . . . . . . 78
� � � � with CO2 as the coolant . . . . . . . . . . . . . . . . . . . . . . . . . 1000 W. . . . . . . . 79
Wall-mounted cooling units from page 80
� � VIP small cooling units . . . . . . . . . . . . . . . . . . . . . . . . . . 225 W. . . . . . . . 82 � � � Mini, in horizontal format . . . . . . . . . . . . . . . . . . . . . . . . . 300 W. . . . . . . . 83
� � � Wall-mounted cooling units . . . . . . . . . . . . . . . . . . . 300/500 W. . . . . . . . 84 � � � Wall-mounted cooling units . . . . . . . . . . . . . . . . . . . . . . . 750 W. . . . . . . . 85
� � � Cool Efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 W. . . . . . . . 86 � � � � Wall-mounted cooling units . . . . . . . . . . . . . . . . . 1000/1500 W. . . . . . . . 87 � � � � Wall-mounted cooling units, slimline . . . . . . . . . . . . . . . 1500 W. . . . . . . . 88 � � � � Wall-mounted cooling units . . . . . . . . . . . . . . . . . 2000/2500 W. . . . . . . . 89 � � � � Wall-mounted cooling units . . . . . . . . . . . . . . . . . . . . . . 4000 W. . . . . . . . 90 � � � � � Design NEMA 4x . . . . . . . . . . . . . . . . . . . . . . 500/1000/1500 W. . . . . . . . 91 � � � � � Design NEMA 4x . . . . . . . . . . . . . . . . . . . . . . . . . 2000/2500 W. . . . . . . . 92
� � � � for precision machine tools . . . . . . . . . . . . . . . . . 1000/1500 W. . . . . . . . 93
� � � Explosion-proof cooling units for zone 22 (dust) . . . . . . . . . . . . . . . . . . . . . . . . . 1000/1500 W. . . . . . . . 94
� � � � with CO2 as the coolant . . . . . . . . . . . . . . . . . . . . . . . . . 1000 W. . . . . . . . 95
Thermoelectric coolers from page 96
� � Thermoelectric coolers . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W. . . . . . . . 97
E
E
E
E
Stainless steel version
Standardised installation
Integral condensate evaporation
Energy-efficient and nano-coated
Suitable for command panels
NEMA 4x
Coolant CO2
Industry solutions
E
Rittal System Clima
67te ControlMod
ular
clim
ate
cont
rol c
once
pt
Modular climate control concept
Less is more! We offer almost limitless application
possibilities from just six cooling modules and eight
door modules. Top cooling technology, complete and
ready to use – no need to make mounting cut-outs.
The existing sheet steel doors are easily exchanged
for section doors with cooling modules. These can
also be exchanged or upgraded while the system is
operational.
68 Rittal System Climate Control
Mod
ular
clim
ate
cont
rol c
once
pt2 6
800
1800
/200
0
120018
00/2
000
1200
1800
/200
0
ModularityWith the section door and cooling module, you can create your own individual climate control solution in next to no time.Choose from 48 different options with varying sizes, cooling outputs and voltages.
Rittal System Climate Control
1
3
4
5
600
1800
/200
0
Infinite possibilitiesSeamless baying and perfect integration. Cooling of a bayed enclosure suite is easily achieved, even under awkward room condi-tions, such as low ceiling heights.
Cooling module, 1500 W useful cooling output
Cooling module, 2500 W useful cooling output
Section doors for installing cooling modules in 600 mm wide enclosures
Section doors for installing cooling modules in 800 mm wide enclosures
Section doors for installing cooling modules in 1200 mm wide enclosures; cooling module fitted on the left
Section doors for installing cooling modules in 1200 mm wide enclosures; cooling module fitted on the right, including lockable door on the left
1
2
3
4
5
6
Benefits at a glance● Combination of TS 8 section door and
climate control module● One item number each for the door and
climate control module● 8 section doors x 6 climate control
modules = 48 combination options● Standard RTT PLUS version with integral
condensate evaporation and RiNano coating
● Intelligent control− Climate control module with Comfort
controller − Controller is identical to those used
with TopTherm climate control systems
ImportantThe TS base/plinth is required for opera-tional purposes.
Tips and tricksApplications see page 207
Selection criteria see page 208
Assembly see page 209
Air routing see page 210
Condensate management see page 213
Electrical connection and control see page 215
69
MCo
Mod
ular
clim
ate
cont
rol c
once
pt
odular climate control conceptoling modules, 1500/2500 W useful cooling output
Su
pply includes:Cooling module prepared for installation in section door, with RiNano coating and integrated condensation evaporation.Also required:
Section door, fits TS 8 enclo-sures, 600, 800, 1200 mm widths and 1800, 2000 mm heights, see page 71.
Base/plinth, 100 or 200 mm high, see Cat. 32, page 893.
Approvals, see page 277.
Detailed drawing,see page 245.
Performance diagrams, available on the Internet.
Model No. SK with Comfort controller 3307.700 3307.710 3307.740 3310.700 3310.710 3310.740
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50/460, 3~, 60 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50/
460, 3~, 60Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
1500 W/1550 W 850 W/900 W
1500 W/1550 W 930 W/950 W
2500 W/2520 W 1620 W/1730 W
2500 W/2500 W 1760 W/1800 W
Rated current max. 6.0 A/6.5 A 12.6 A/12.6 A 2.6 A/2.8 A 7.8 A/8.8 A 18.1 A/19.8 A 3.6 A/3.8 AStart-up current 22.0 A/24.0 A 36.0 A/39.0 A 8.5 A/9.2 A 22.0 A/24.0 A 36.0 A/39.0 A 13.0 A/14.0 APre-fuse gG 16.0 A/16.0 A 16.0 A/16.0 A 6.3 – 10.0 A1) 16.0 A/16.0 A 20.0 A/20.0 A 6.3 – 10.0 A1) Power consumption Pelto DIN 3168
L 35 L 35L 35 L 50
910 W/1100 W 1100 W/1250 W
940 W/1130 W 1140 W/1280 W
850 W/910 W 920 W/980 W
1410 W/1620 W 1580 W/1950 W
1460 W/1670 W 1630 W/2000 W
1380 W/1580 W 1620 W/1920 W
Refrigeration factor ε = L 35 L 35 1.6 1.6 1.7 1.7 1.8Refrigerant R134a, 700 g R134a, 900 gPermissible operating pressure p. max. 28 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight2) 72 kg 72 kg 75 kg 74 kg 74 kg 76 kgColour RAL 7035
Air throughput of fansExternal circuit 1100 m3/h 1100 m3/hInternal circuit 520 m3/h 1100 m3/h
Temperature control Comfort controller (factory setting +35°C)Accessories Packs of PageDoor-operated switch 1 4127.000 176 Filter media 1 See accessories section door 71 SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195
Interface card for Comfort controller 1 3124.200 179 Special voltages available on request. We reserve the right to make technical modifications.1) Motor circuit-breaker2) Includes section door weight
QK .
QK/Pel.
70 Rittal System Climate Control
Accessories Page 171 TS 8 enclosures Cat. 32, from Page 142 Configuration software Page 195
B
H
Width Depth
Modular climate control conceptSection doors for installing cooling modules
B
H
B
H
B
H
B =T =
Co
dula
r cl
imat
e co
ntro
l con
cept
lour:RAL 7035
Supply includes:Section door unit without pre-fitted cooling module, including TS 8 hinges, door opening angle approx. 110°.
Note for 1200 mm wide TS 8 enclosures: With the device positioned on the “right”, one pack consists of a section door for installing in the right-hand half of the enclosure plus a special lockable door for the left-hand half.
With the device positioned on the “left”, one pack consists of a section door for installing in the left-hand half of the enclosure. The existing lockable door on the right may be used.
Also required:
Cooling module,see page 70.
Base/plinth, 100 or 200 mm high, see Cat. 32, page 893.
Detailed drawing,see page 245.
Mo
Model No. SK for 1800 mm high TS enclosures 3300.040 3300.060 3300.080 3300.110Model No. SK for 2000 mm high TS enclosures 3300.050 3300.070 3300.090 3300.120
Dimensions to fit TS enclosures
Width mm 600 800
1200 (unit positioned on the left)
1200 (unit positioned on the right)
Accessories Packs of Filter media 1 3284.210 3284.210 3284.210 3284.210
All SK 3307.700/.710/.740 or 3310.700/.710/.740 cooling module models, see page 70, can be integrated in the section doors mentioned above.
71Rittal System Climate Control
Accessories Page 171 TS 8 enclosures Cat. 32, from Page 142 Configuration software Page 195
Roo
f-m
ount
ed c
oolin
g un
its
Roof-mounted cooling units
Cooling units keep the enclosure internal temperature
at a constant level, with the air routing being tailored to
individual requirements. Two separate circuits prevent
the ingress of dust into the enclosure.
Rittal TopTherm-Plus roof-mounted cooling units:
Top design and top performance with a host of
assembly benefits and sophisticated air routing.
Superb performance plus cost-cutting
design.
72 Rittal System Climate Control
Rittal System Climate Control
Roo
f-m
ount
ed c
oolin
g un
its
Versatility and flexibility of roof mountingCut your costsAll three-phase cooling units are suitable for a voltage range of 400/460 V and a frequency range of 50/60 Hz without rewiring. No need for expensive additional transformers.
Flexible performanceJust 3 mounting cut-outs for 6 dif-ferent output categories provide investment security and facilitate easy adaptation of the cooling out-put to the ambient conditions and the installed heat loss.
Rittal platform strategyTopTherm air/water heat exchang-ers and roof-mounted fans are also compatible with the mounting cut-outs.
Optimum flow conditionsTargeted air routing inside the enclosureThe internal air circulation is targeted and effective: The heated air is extracted cen-trally. Air exhaust occurs in the four corners, depending on requirements. Cold air is routed in a controlled manner into the lower enclosure chamber via the optional ducting system. The result is highly effective cooling and the avoidance of air short-circuits. The targeted air circulation inside the enclosure via ducts also prevents the creation of hot-spots.
Integrated into TopTherm-Plus cooling unitsElectrical condensate evaporationCondensate arising inside the enclosure or on the evaporator coil of the cooling unit is effectively evaporated. The evaporator device inside the cooling units has a very high evaporation output (several litres per day). This is achieved thanks to the princi-ple of direct evaporation.
RiNano coating The standard nano-coating on the heat exchanger membranes ensure a longer, constant cooling output and renders the use of filter media superfluous in many areas.
Benefits at a glance● Highly efficient in both performance and
energy consumption● Wide output range from 500 to 4000 W● Control and monitoring with Basic or
Comfort controllers● Three-phase cooling units support
multiple voltages as standard ● Uniform, performance-related, system-
wide mounting cut-outs● Targeted, individual air routing● Electric condensate evaporation and
RiNano coating
Important Avoid overloading the roof plate by using stays (with TS 8 system accessories, Catalogue 32, page 998)
Tips and tricksApplications see page 207
Selection criteria see page 208
Assembly see page 209
Air routing see page 210
Condensate management see page 213
Electrical connection and control see page 215
73
Roo
f-m
ount
Roof-mounted cooling unitsUseful cooling output 500/750 W
380
597
417
475 260
ed c
oolin
g un
its
SupplyNano-cintegralevaporaFully wiincludinassemb
Property rights:German registered designno. 402 02 324 German registered design no. 402 02 325
includes:oated condenser and electronic condensate tion.
red ready for connection, g drilling template and ly parts.
Accessories:
Roof plate for TS 8 with mounting cut-out, see page 181.
Approvals, see page 277.
Detailed drawing, see page 246.
Performance diagrams, available on the Internet.
Model No. SK with Basic controller, RAL 7035 3382.100 3382.110 3359.100 3359.110 3359.140
Model No. SK with Comfort controller, RAL 7035 3382.500 3382.510 3359.500 3359.510 3359.540
Model No. SK with Basic controller, stainless steel1) 3382.200 3382.210 3359.200 3359.210 3359.240
Model No. SK with Comfort controller, stainless steel1) 3382.600 3382.610 3359.600 3359.610 3359.640
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 50/60 230, 1~, 50/60 115, 1~, 50/60 400, 2~, 50/60Dimensions in mm WHD 597 x 417 x 380Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
500 W/510 W 270 W/370 W
750 W/810 W 545 W/590 W
Rated current max. 3.3 A/3.5 A 6.7 A/7.2 A 3.6 A/4.5 A 7.2 A/9.0 A 2.1 A/2.6 AStart-up current 9.2 A/10.2 A 18.4 A/18.4 A 10.0 A/10.7 A 20.0 A/21.4 A 5.8 A/6.2 APre-fuse T 10.0 A 10.0 A 10.0 A 16.0 A 6.3 A – 10.0 A2) Power consumption Pelto DIN 3168
L 35 L 35L 35 L 50
500 W/550 W 550 W/590 W
510 W/560 W 560 W/610 W
550 W/660 W630 W/740 W
560 W/675 W640 W/750 W
Refrigeration factor ε = L 35 L 35 1.0 1.4Refrigerant R134a, 250 g R134a, 300 gPermissible operating pressure p. max. 25 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 30 kg 35 kg 32 kg 37 kg
Air throughput of fans (unimpeded air flow)
External circuit 910 m3/hInternal circuit 440 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C) Accessories Packs of PageFilter mats 3 3286.500 189 Metal filters 1 3286.510 190 Quick-change frame 1 3286.700 182 Door-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195Interface card for Comfort controller 1 3124.200 179 Air-ducting system 1 3286.870 174 Cover stoppers for interior air outlet 2 3286.780 175 Condensate hose 1 3301.612 192
1) Delivery times available on request. 2) Transformer protection switch. Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
74 Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Useful cooling output 1000 W
Roof-mounted cooling units
ed c
oolin
g un
its
475
597
417
490 390
Supply iNano-coaintegral eevaporatFully wireincludingassembly
Property rights:German registered designno. 402 02 324 German registered design no. 402 02 325
nt
ncludes:ted condenser and lectronic condensate ion. d ready for connection, drilling template and parts.
Accessories:
Roof plate for TS 8 with mounting cut-out, see page 181.
Approvals, see page 277.
Detailed drawing,see page 246.
Performance diagrams, available on the Internet.
Model No. SK with Basic controller, RAL 7035 3383.100 3383.110 3383.140
Roo
f-m
ou
Model No. SK with Comfort controller, RAL 7035 3383.500 3383.510 3383.540Model No. SK with Basic controller, stainless steel1) 3383.200 3383.210 3383.240
Model No. SK with Comfort controller, stainless steel1) 3383.600 3383.610 3383.640
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 50/60 400, 2~, 50/60Dimensions in mm WHD 597 x 417 x 475Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
1000 W/1080 W760 W/820 W
Rated current max. 4.9 A/5.1 A 9.5 A/10.0 A 2.8 A/2.8 AStart-up current 15.5 A/15.5 A 25.3 A/24.3 A 8.0 A/8.8 APre-fuse T 10.0 A 16.0 A 6.3 A – 10.0 A2) Power consumption Pel to DIN 3168
L 35 L 35L 35 L 50
690 W/790 W800 W/890 W
720 W/800 W810 W/900 W
Refrigeration factor ε = L 35 L 35 1.4 Refrigerant R134a, 500 gPermissible operating pressure p. max. 25 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 40 kg 46 kg 46 kg
Air throughput of fansExternal circuit 1760 m3/hInternal circuit 440 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.500 189 Metal filters 1 3286.510 190 Quick-change frame 1 3286.800 182 Door-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195Interface card for Comfort controller 1 3124.200 179 Air-ducting system 1 3286.870 174 Cover stoppers for interior air outlet 2 3286.880 175 Condensate hose 1 3301.612 192
1) Delivery times available on request. 2) Transformer protection switch. Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
Accessories Page 171 Configuration software Page 195
75Rittal System Climate Control
Roof-mounted Useful cooling output 11
Roo
f-m
oun
cooling units00/3000 W
895
597
417
392 692
475
597
417
490 390
ted
cool
ing
units
Especialapplicati(considecooling uapplicatio
Supply iNano-coaintegral eevaporat
ly for office ons. Low noise level rably quieter than nits for industrial ns).
ncludes:ted condenser and lectronic condensate ion. Fully wired ready
for connection, including drilling template and assembly parts.
Property rights: (Not with SK 3301.800)German registered design no. 402 02 324 German registered design no. 402 02 325
Accessories:
Roof plate for TS 8 with mounting cut-out, see page 181.
Approvals, see page 278.
Detailed drawing,see page 246.
Performance diagrams, available on the Internet.
Model No. SK with Comfort controller 3273.500 3273.5151) 3301.800
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 50/60 230, 1~, 50Dimensions in mm WHD 597 x 417 x 475 597 x 417 x 895Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
1100 W/1200 W850 W/870 W
L 35 L 25L 45 L 35
3000 W3200 W
Rated current max. 5.2 A/5.4 A 11.0 A/11.5 A 9.2 AStart-up current 15.5 A/16.5 A 32.0 A/35.0 A 36.0 APre-fuse T gG 10.0 A 20.0 A Power circuit-breaker 16.0 A Power consumption Pel to DIN 3168
L 35 L 35L 35 L 50
890 W/910 W960 W/1100 W
920 W/940 W990 W/1140 W
L 35 L 25L 45 L 35
1820 W2325 W
Refrigeration factor ε = L 35 L 35 1.2 1.6Refrigerant R134a, 700 g R134a, 1200 gPermissible operating pressure p. max. 25 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 542)
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 42 kg 47 kg 72 kgColour RAL 7035
Air throughput of fansExternal circuit 1760 m3/h 1850 m3/hInternal circuit 440 m3/h 1450 m3/h
Temperature control Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.500 3286.600 189 Metal filters 1 3286.510 3286.610 190 Door-operated switch 1 4127.000 176 SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195 Interface card for Comfort controller 1 3124.200 179 Air-ducting system 1 3286.870 3286.970 174 Cover stoppers for interior air outlet 2 3286.880 3286.980 175 Condensate hose 1 3301.612 192
1) Delivery times on request. 2) In order to avoid increased condensation, we recommend enclosures with a protection category of at least IP 54.Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
Accessories Page 171 Configuration software Page 195
76 Rittal System Climate Control
Useful cooling output 1500/2000 W
Roof-mounted cooling units
nted
coo
ling
units
475
597
417
490 390
Supply Nano-cointegral evaporafor conntemplate
Model N
Property rights:German registered design no. 402 02 324 German registered design no. 402 02 325
includes:ated condenser and electronic condensate tion. Fully wired ready ection, including drilling and assembly parts.
Accessories:
Roof plate for TS 8 with mounting cut-out, see page 181.
Approvals, see page 277.
Detailed drawing,see page 246.
Performance diagrams, available on the Internet.
o. SK with Basic controller, RAL 7035 3384.100 3384.110 3384.140 3385.100 3385.110 3385.140
Roo
f-m
ou
Model No. SK with Comfort controller, RAL 7035 3384.500 3384.510 3384.540 3385.500 3385.510 3385.540Model No. SK with Basic controller, stainless steel1) 3384.200 3384.210 3384.240 3385.200 3385.210 3385.240
Model No. SK with Comfort controller, stainless steel1) 3384.600 3384.610 3384.640 3385.600 3385.610 3385.640
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 50/60 400, 2~, 50/60 230, 1~, 50/60 115, 1~, 50/60 400, 2~, 50/60Dimensions in mm WHD 597 x 417 x 475 597 x 417 x 475Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
1500 W/1520 W1100 W/1210 W
2000 W/2130 W1570 W/1670 W
Rated current max. 6.3 A/7.4 A 13.7 A/15.3 A 3.8 A/4.4 A 6.3 A/7.2 A 14.2 A/15.4 A 3.7 A/4.2 AStart-up current 16.6 A/17.1 A 30.7 A/29.1 A 9.8 A/9.6 A 16.8 A/18.4 A 36.0 A/32.0 A 10.0 A/12.0 APre-fuse T 10.0 A 20.0 A 6.3 A – 10.0 A2) 10.0 A 20.0 A 6.3 A – 10.0 A2) Power consumption Pel to DIN 3168
L 35 L 35L 35 L 50
955 W/1070 W1090 W/1230 W
990 W/1090 W1140 W/1290 W
1140 W/1310 W1240 W/1450 W
1190 W/1390 W1300 W/1520 W
Refrigeration factor ε = L 35 L 35 1.6 1.5 1.8 1.7Refrigerant R134a, 500 g R134a, 950 gPermissible operating pressure p. max. 25 barTemperature and setting range +20°C to +55°C
Protection categoryto EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 41 kg 47 kg 47 kg 42 kg 48 kg 48 kg
Air throughput of fansExternal circuit 1760 m3/h 1820 m3/hInternal circuit 470 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.500 189 Metal filters 1 3286.510 190 Quick-change frame 1 3286.800 182 Door-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195
Interface card for Comfort controller 1 3124.200 179 Air-ducting system 1 3286.870 174 Cover stoppers for interior air outlet 2 3286.880 175 Condensate hose 1 3301.612 192
1) Delivery times available on request. 2) Transformer protection switch. Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
Accessories Page 171 Configuration software Page 195
77Rittal System Climate Control
Roof-moUseful coolin
Roo
f-m
ount
unted cooling unitsg output 3000/4000 W
580
796
470
692 392
ed c
oolin
g un
its
Supply inNano-coaintegral eevaporatiFully wireincludingeyebolt a
Property rights:German registered design no. 402 02 324 German registered design no. 402 02 325
cludes:ted condenser and lectronic condensate on. d ready for connection, drilling template, nd assembly parts.
Accessories:
Roof plate for TS 8 with mounting cut-out, see page 181.
Approvals, see page 277.
Detailed drawing,see page 246.
Performance diagrams, available on the Internet.
Model No. SK with Basic controller, RAL 7035 3386.140 3387.140
Model No. SK with Comfort controller, RAL 7035 3386.540 3387.540
Model No. SK with Basic controller, stainless steel1) 3386.240 3387.240
Model No. SK with Comfort controller, stainless steel1) 3386.640 3387.640
Rated operating voltage V/Hz 400, 3~, 50/460, 3~, 60 400, 3~, 50/460, 3~, 60Dimensions in mm WHD 796 x 470 x 580 796 x 470 x 580Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
3000 W/3300 W2200 W/2500 W
4000 W/4200 W3250 W/3490 W
Rated current max. 3.4 A/3.4 A 3.9 A/3.9 AStart-up current 8.0 A/9.0 A 17.0 A/19.0 APre-fuse T Motor circuit breaker 6.3 A – 10.0 APower consumption Pel to DIN 3168
L 35 L 35L 35 L 50
1320 W/1630 W1570 W/1910 W
1760 W/2200 W2010 W/2480 W
Refrigeration factor ε = L 35 L 35 2.3 Refrigerant R134a, 1600 g R134a, 1800 gPermissible operating pressure p. max. 25 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 70 kg 77 kg
Air throughput of fansExternal circuit 3450 m3/h 3870 m3/hInternal circuit 1280 m3/h 1420 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.600 189 Metal filters 1 3286.610 190 Quick-change frame 1 3286.900 182 Door-operated switch 1 4127.000 176 SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195Interface card for Comfort controller 1 3124.200 179 Air-ducting system 1 3286.970 174 Cover stoppers for interior air outlet 2 3286.980 175 Condensate hose 1 3301.612 192
1) Delivery times available on request. Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
78 Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
with CO2 as the coolant, useful cooling output 1000 W
Roof-mounted cooling units
Roo
f-m
ount
ed c
oolin
g un
its
475
597
417
490 390
Environmcoolant This genealready uas the cocooling p
Supply iNano-coaintegral eevaporatFully wireincludingassembly
Model No
Rated opDimensioUseful coto DIN 31
entally friendly
ration of cooling units ses the alternative CO2 olant for generating the ower.
ncludes:ted condenser and lectronic condensate ion. d ready for connection, drilling template and parts.
Accessories:
Roof plate for TS 8 with mounting cut-out, see page 181.
Approvals, see page 278.
Detailed drawing,see page 246.
. SK with Comfort controller 3383.740
erating voltage V/Hz 230, 50/60ns in mm WHD 597 x 417 x 475oling output 68 L 35 L 35 1000 W
Temperature and setting range +20°C to +55°C
Protection category to EN 60 529External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 42 kgColour RAL 7035
Air throughput of fansExternal circuit 1760 m3/hInternal circuit 440 m3/h
Temperature control Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.500 189 Metal filters 1 3286.510 190 Door-operated switch 1 4127.000 176Air-ducting system 1 3286.870 174 Cover stoppers for interior air outlet 2 3286.880 175 Condensate hose 1 3301.612 192
We reserve the right to make technical modifications. Other specifications available upon request.
QK .
79Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Wal
l-mou
nted
coo
ling
units
Wall-mounted cooling units
Top design and top performance with a host of
assembly benefits. The Rittal platform strategy with
system-wide mounting cut-outs to fit cooling units and
air/air heat exchangers allows easy adaptation to the
required cooling output, even retrospectively.
80 Rittal System Climate Control
Rittal System Climate Control
Wal
l-mou
nted
coo
ling
units
Versatility and flexibility of wall mountingWall-mounted cooling units – practical and elegant.Determination of the mounting cut-out depends on the mounting vari-ant – external, internal or partial internal mounting. This makes opti-mum use of the space available. With external mounting, openings are only required for air inlet and outlet. The enclosure surface con-taining the cut-out for partial or full internal mounting is stabilised by the divided internal case construc-tion. Special internal or external mounting kits are not required.
Integrated into TopTherm-Plus cooling unitsElectrical condensate evaporationCondensate arising inside the enclosure or on the evaporator coil of the cooling unit is effectively evaporated. The evaporator device inside the cooling units has a very high evaporation output (several litres per day). This is achieved thanks to the princi-ple of direct evaporation.
RiNano coatingThe standard nano-surface finish on heat exchanger membranes ensures a long, constant cooling output and eliminates the need for filter media in many areas.
Platform strategyFlexible performanceJust 5 mounting cut-outs for 8 different out-put categories provide investment security and facilitate easy adaptation of the cooling output to the ambient conditions and the installed heat loss.
Rittal platform strategyTopTherm air/air heat exchangers are also compatible with the mounting cut-outs.
Benefits at a glance● Super-efficient performance and energy
consumption● Wide output range from 225 to 4000 W● Controlling and monitoring via Basic or
Comfort controller ● Three-phase cooling units support
multiple voltages as standard● Uniform, output-related, cross-system
mounting cut-outs, to match TopTherm-Plus air/air heat exchangers
● Electrical condensate evaporation and RiNano coating
ImportantAir inlet and outlet openings in the internal and external circuit must not be obstructed by electrical installations.
Tips and tricksApplications see page 207
Selection criteria see page 208
Assembly see page 209
Air routing see page 210
Condensate management see page 213
Electrical connection and control see page 215
81
Wal
l-mou
nted
coo
ling
units
Wall-mountedVIP small cooling unit
cooling unitss, useful cooling output 225 W
526
353.
5288465
105
32183
296
288465
183
32
353.
5
296
105
1
1
60
60
Th
e new VIP SK small cooling units were developed especially for cooling the VIP 6000 com-mand panel. In addition, VIP small cooling units also offer a space-saving, economical solu-tion for the climate control of small enclosures where small heat loads are generated by the system.Supply includes:Fully wired ready for connection and pre-mounted on an aluminium rear panel to fit VIP 6000 operating housing 7 U.
Property rights:German patent no. 198 17 917
Distance from installed equipment at least 60 mm
Approvals, see page 279.
Performance diagrams, available on the Internet.
1
Model No. SK 3201.100 3202.100
Condenser version Left RightRated operating voltage V/Hz 230, 50/60
Dimensions in mm WHD
526 353.5 105
Useful cooling output to DIN 3168
L 35 L 35L 35 L 45
225 W/270 W160 W/200 W
Rated current max. 1.5 A/1.5 AStart-up current 1.9 A/2.0 APre-fuse T 4.0 A/4.0 APower consumption Pel to DIN 3168
L 35 L 35L 35 L 45
285 W/300 W315 W/325 W
Refrigeration factor ε = L 35 L 35 0.8/0.9Refrigerant R134a, 170 gPermissible operating pressure p. max. 27 barTemperature and setting range +20°C to +45°C
Protection category to EN 60 529
External circuit IP 24Internal circuit IP 54
Duty cycle 100 %Type of connection Terminal stripWeight 10.5 kgColour Rear panel aluminium, vent grille RAL 7035
Air throughput of fansExternal circuit 235 m3/h / 270 m3/hInternal circuit 160 m3/h / 180 m3/h
Temperature control Electronic control (factory setting +35°C)Accessories Packs of PageTemperature indicator 1 3114.100 177 Condensate hose 1 3301.608 192
Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
82 Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Mini cooling unit in horizontal format, useful cooling output 300 W
Wall-mounted cooling units
ed c
oolin
g un
its
340
525
153 98
55
Mini coolingformat, ideaenclosures ings with option.
l-mou
nt
units in horizontal l for cooling small and operating hous-timum space utilisa-
Supply includes:Nano-coated condenser. Fully wired ready for connection, including drilling template and assembly parts.
Approvals, see page 279.
Detailed drawing,see page 247.
Performance diagrams, available on the Internet.
Model No. SK 3302.300 3302.310
Wal
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 60Dimensions in mm WHD
525 340 153
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
300 W/320 W 150 W/160 W
300 W150 W
Rated current max. 1.6 A/1.7 A 4.0 AStart-up current 4.3 A/5.3 A 12.0 APre-fuse T 10.0 A 10.0 APower consumption Pel to DIN 3168
L 35 L 35L 35 L 50
285 W/300 W320 W/340 W
290 W340 W
Refrigeration factor ε = L 35 L 35 1.1Refrigerant R134a, 100 g R134a, 95 gPermissible operating pressure p. max. 25 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 13 kgColour RAL 7035
Air throughput of fansExternal circuit 345 m3/hInternal circuit 310 m3/h
Temperature control Basic controllerAccessories Packs of PageTemperature indicator 1 3114.100 177 Condensate hose 1 3301.608 192 Filter mats 3 3286.110 189 Metal filters 1 3286.120 190
Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
83Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Wall-mounteUseful cooling outp
Wal
l-mou
d cooling unitsut 300/500 W
T2
42
550
T
280 100110
1
T = Depth
nted
coo
ling
units
Supply iNano-coawired reaincludingassembly
ncludes:ted condenser. Fully dy for connection, drilling template and parts.
Partial internal mounting possible with 3303.XXX only.
Approvals, see page 280.
Detailed drawing,see page 247.
Performance diagrams, available on the Internet.
Property rights: German registered design no. 402 02 324 and no. 402 02 325 Japanese registered design no. 1 187 896 Indian registered design no. 189 953 US design patent no. D 488,480 IR reg. design no. DM/061 967 with validity for FR, IT, ES
1
Model No. SK with Basic controller, RAL 7035 3302.100 3302.110 3303.100 3303.110
Model No. SK with Comfort controller, RAL 7035 – – 3303.500 3303.510
Model No. SK with Basic controller, stainless steel1) 3302.200 3302.210 3303.200 3303.210
Model No. SK with Comfort controller, stainless steel1) – – 3303.600 3303.610
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 60 230, 1~, 50/60 115, 1~, 60
Dimensions in mm
WHTT2
280 550 14098
280 550 210164
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
300 W/320 W150 W/170 W
300 W150 W
500 W/610 W280 W/350 W
500 W280 W
Rated current max. 1.6 A/1.7 A 3.3 A 2.6 A/2.6 A 5.7 AStart-up current 3.0 A/3.4 A 8.0 A 5.1 A/6.4 A 11.5 APre-fuse T 10.0 A 10.0 A 10.0 A 10.0 APower consumption Pelto DIN 3168
L 35 L 35L 35 L 50
245 W/255 W255 W/275 W
290 W340 W
360 W/380 W420 W/390 W
470 W500 W
Refrigeration factor ε = L 35 L 35 1.2 1.4Refrigerant R134a, 100 g R134a, 170 gPermissible operating pressure p. max. 25 bar 28 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 13 kg 17 kg
Air throughput of fansExternal circuit 310 m3/h 345 m3/hInternal circuit 345 m3/h 310 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.300 189 Metal filters 1 3286.310 190 Door-operated switch 1 4127.000 176 SK BUS system for Comfort controller 1 – 3124.100 180 RiDiag II including cables for Comfort controller 1 – 3159.100 195Interface card for Comfort controller 1 – 3124.200 179 Condensate hose 1 3301.608 3301.610 192
1) Delivery times available on request. Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
Accessories Page 171 Configuration software Page 195
84 Rittal System Climate Control
Useful cooling output 750 W
Wall-mounted cooling units
ount
ed c
oolin
g un
its
235
45
550
280
280 125155
Supply inNano-coatwired readincluding dassembly
ll-m
cludes:ed condenser. Fully y for connection, rilling template and
parts.
Approvals, see page 280.
Detailed drawing,see page 247.
Performance diagrams, available on the Internet.
Property rights: German registered design no. 402 02 324 and no. 402 02 325 Japanese registered design no. 1 187 896 Indian registered design no. 189 953 US design patent no. D 488,480 IR reg. design no. DM/061 967 with validity for FR, IT, ES
Model No. SK with Basic controller, RAL 7035 3361.100 3361.110 3361.140
Model No. SK with Comfort controller, RAL 7035 3361.500 3361.510 3361.540
Wa
Model No. SK with Basic controller, stainless steel1) 3361.200 3361.210 3361.240
Model No. SK with Comfort controller, stainless steel1) 3361.600 3361.610 3361.640
Rated operating voltage V/Hz 230, 1~, 50/603) 115, 1~, 603) 4002), 2~, 50/603)
Dimensions in mmWHD
280 550 280
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
750 W/780 W510 W/540 W
750 W500 W
750 W/780 W510 W/540 W
Rated current max. 2.3 A/2.4 A 5.3 A 1.2 A/1.4 AStart-up current 5.6 A/5.6 A 12.0 A 3.1 A/3.3 APre-fuse T 10.0 A 10.0 A 6.3 A – 10.0 A4) Power consumption Pelto DIN 3168
L 35 L 35L 35 L 50
480 W/550 W530 W/640 W
570 W670 W
480 W/550 W530 W/640 W
Refrigeration factor ε = L 35 L 35 1.5Refrigerant R134a, 280 g R134a, 260 g R134a, 280 g Permissible operating pressure p. max. 28 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 22 kg
Air throughput of fans (unimpeded air flow)
External circuit 480 m3/hInternal circuit 600 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.300 189 Metal filters 1 3286.310 190 Door-operated switch 1 4127.000 176 SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.610 192
1) Delivery times on request. 2) External toroidal core transformer Ø 126 x 65 mm deep for mounting in the enclosure. 3) Tu max. = 52°C/60 Hz.4) Transformer protection switch. Special voltages available on request. Technical modifications reserved.
QK .
QK/Pel.
85Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Wall-mounted coolCool Efficiency, useful coolin
Wal
l-mou
NEWup to 45 % less
energy consump
ing unitsg output 1000 W
tion
105155
210
50
950
260400
nted
coo
ling
units
Supply inNano-coatintegral coration. Fullconnectiontemplate a
cludes:ed condenser and ndensate evapo-y wired ready for , including drilling nd assembly parts.
Approvals, see page 280.
Detailed drawing,see page 248.
Performance diagrams, available on the Internet.
Model No. SK with Basic controller, RAL 7035 3304.700
Model No. SK with Comfort controller, RAL 7035 3304.800
Rated operating voltage V/Hz 230, 1~, 50
Dimensions in mm WHD
400 950 260
Useful cooling output to DIN 3168 L35 L35 1000 W
Rated current max. 3.0 AStart-up current 12.0 APre-fuse T 10.0 APower consumption Pel to DIN 3168
L 35 L 35L 35 L 45
520 W580 W
Refrigeration factor ε = L 35 L 35 1.9Refrigerant R134a, 325 gPermissible operating pressure p. max. 20 barTemperature and setting range +20°C to +45°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 40 kg
Air throughput of fansExternal circuit 600 m3/hInternal circuit 450 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.400 189 Metal filters 1 3286.410 190 Door-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195
Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192
Delivery times on request.Special voltages and other output categories available on request. Technical modifications reserved.
QK .
QK/Pel.
86 Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Useful cooling output 1000/1500 W
Wall-mounted cooling units
nted
coo
ling
units
105155
210
50
950
260400
Supply inNano-coatintegral eleevaporatiofor connectemplate a
Model No.
ucludes:ed condenser and ctronic condensate n. Fully wired ready tion, including drilling nd assembly parts.
Approvals, see page 280.
Detailed drawing,see page 248.
Performance diagrams, available on the Internet.
Property rights: German registered design no. 402 02 325 IR reg. design no. DM/062 557 with validity for FR, IT, ES Indian registered design no. 190 269 Japanese registered design no. 1 187 905
SK with Basic controller, RAL 7035 3304.100 3304.110 3304.140 3305.100
3305.110 3305.140Wal
l-mo
Model No. SK with Comfort controller, RAL 7035 3304.500 3304.510 3304.540 3305.500 3305.5101) 3305.540Model No. SK with Basic controller, stainless steel1) 3304.200 3304.210 3304.240 3305.200 3305.210 3305.240
Model No. SK with Comfort controller, stainless steel1) 3304.600 3304.610 3304.640 3305.600 3305.610 3305.640
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50/460, 3~, 60 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50/
460, 3~, 60
Dimensions in mm WHD
400 950 260
400 950 260
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
1000 W/1060 W790 W/840 W
1500 W/1510 W1230 W/1250 W
Rated current max. 5.4 A/5.0 A 10.6 A/11.1 A 2.8 A/2.9 A 6.0 A/6.5 A 12.1 A/13.6 A 2.6 A/2.9 AStart-up current 12.0 A/14.0 A 26.0 A/28.0 A 11.5 A/12.7 A 22.0 A/24.0 A 42.0 A/46.0 A 12.2 A/11.3 APre-fuse T 10.0 A 16.0 A 6.3 A – 10.0 A2) 16.0 A 20.0 A 6.3 A – 10.0 A2) Power consumption Pel to DIN 3168
L 35 L 35L 35 L 50
825 W/775 W875 W/835 W
850 W/800 W900 W/875 W
700 W/675 W785 W/800 W
975 W/1125 W1125 W/1285 W
1000 W/1175 W1165 W/1325 W
925 W/1100 W1085 W/1275 W
Refrigeration factor ε = L 35 L 35 1.2 1.4 1.5 1.6Refrigerant R134a, 325 g R134a, 500 g R134a, 600 gPermissible operating pressure p. max. 25 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 39 kg 44 kg 40 kg 41 kg 46 kg 42 kg
Air throughput of fansExternal circuit 900 m3/hInternal circuit 600 m3/h 800 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.400 189 Metal filters 1 3286.410 190 Door-operated switch 1 4127.000 176 SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195
Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192
1) Delivery times available on request. 2) Motor circuit-breaker. Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
87Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Wall-mounted cSlimline, useful cooling
Wal
l-mou
ooling units output 1500 W
1590
205435 140
65
1590
165435 140
25
nted
coo
ling
units
● Simple, fast assemblthe need to drill addiholes
● Ideal for restricted mlocations
● Super-slimline design● Minimal installation d
build height.
Model No. SK with Basic
y without tional
ounting
epth and
Supply includes:Nano-coated condenser and integral electronic condensate evaporation. Fully wired ready for connection, including drilling template and assembly parts.
Approvals, see page 281/282.
Detailed drawing,see page 249.
Performance diagrams, available on the Internet.
controller, RAL 7035 3366.100 3377.1001) 3366.110 3377.1101) 3366.140 3377.1401)
1) 1) 1)
Model No. SK with Comfort controller, RAL 7035 3366.500 3377.500 3366.510 3377.510 3366.540 3377.540Model No. SK with Basic controller, stainless steel1) 3366.200 3377.200 3366.210 3377.210 3366.240 3377.240
Model No. SK with Comfort controller, stainless steel1) 3366.600 3377.600 3366.610 3377.610 3366.640 3377.640
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50/460, 3~, 60
Dimensions in mmWHD
435 1590 205
4351590165
4351590205
4351590165
4351590205
4351590165
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
1500 W/1500 W1050 W/1100 W
1500 W/1500 W980 W/1080 W
Rated current max. 7.1 A/7.3 A 14.3 A/14.7 A 3.0 A/3.1 AStart-up current 22.0 A/24.0 A 43.0 A/47.0 A 8.0 A/8.8 APre-fuse T 10.0 A 20.0 A 6.3 A – 10.0 A2) Power consumption Pelto DIN 3168
L 35 L 35L 35 L 50
1045 W/1175 W1220 W/1335 W
1075 W/1200 W1265 W/1375 W
1090 W/1240 W1260 W/1430 W
Refrigeration factor ε = L 35 L 35 1.4 1.3Refrigerant R134a, 700 gPermissible operating pressure p. max. 28 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 45 kg 50 kg 46 kg
Air throughput of fans (unimpeded air flow)
External circuit 910 m3/hInternal circuit 860 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.400 3253.010 3286.400 3253.010 3286.400 3253.010 189 Metal filters 1 3286.410 3253.220 3286.410 3253.220 3286.410 3253.220 190 Trim frame for external device mounting 1 3377.000 182 Door-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195
Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192
1) Delivery times available on request. 2) Motor circuit-breaker. Special voltages available on request. Technical modifications reserved.
QK .
QK/Pel.
Accessories Page 171 Configuration software Page 195
88 Rittal System Climate Control
Useful cooling output 2000/2500 W
Wall-mounted cooling units
unte
d co
olin
g un
its
400
40
1580
295 145150
245
50
Supply includes:Nano-coated condeintegral electronic cevaporation. Fully wfor connection, inclutemplate, eyebolt anparts.
nser and ondensate ired ready ding drilling d assembly
Also required:
For installation in the door, we recommend the use of the ride-up roller (TS 4538.000) see Cat. 32, page 967 and 180° hinges (TS 8800.710), see Cat. 32, page 961, and for use in the side panel we recommend the use of the TS enclosure
panel fasteners (TS 8800.071), see Cat. 32, page 918.
Approvals, see page 280.
Detailed drawing,see page 248.
Performance diagrams, available on the Internet.
Wal
l-mo
Model No. SK with Basic controller, RAL 7035 3328.100 3328.110 3328.140 3329.100 3329.110 3329.140Model No. SK with Comfort controller, RAL 7035 3328.500 3328.510 3328.540 3329.500 3329.510 3329.540
Model No. SK with Basic controller, stainless steel1) 3328.200 3328.210 3328.240 3329.200 3329.210 3329.240
Model No. SK with Comfort controller, stainless steel1) 3328.600 3328.610 3328.640 3329.600 3329.610 3329.640
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50/460, 3~, 60 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50/
460, 3~, 60
Dimensions in mmWHD
400 1580 295
400 1580 295
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
2000 W/2350 W1450 W/1690 W
2500 W/2750 W1600 W/1750 W
2500 W/2700 W1900 W/1950 W
Rated current max. 7.5 A/9.1 A 14.7 A/17.3 A 2.8 A/3.3 A 8.6 A/10.6 A 17.0 A/22.0 A 3.7 A/3.8 AStart-up current 22.0 A/26.0 A 36.0 A/39.0 A 6.8 A/7.8 A 21.0 A/21.0 A 44.0 A/42.0 A 6.8 A/7.6 APre-fuse T 16.0 A 25.0 A 6.3 A – 10.0 A2) 16.0 A 25.0 A 6.3 A – 10.0 A2) Power consumption Pel to DIN 3168
L 35 L 35L 35 L 50
1025 W/1200 W1250 W/1350 W
1085 W/1250 W1300 W/1410 W
1050 W/1275 W1275 W/1525 W
1450 W/1675 W1625 W/2000 W
1500 W/1725 W1675 W/2065 W
1425 W/1625 W1675 W/1975 W
Refrigeration factor ε = L 35 L 35 2.0 1.8 1.9 1.7 1.8Refrigerant R134a, 950 gPermissible operating pressure p. max. 28 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 66 kg 73 kg 67 kg 69 kg 76 kg 70 kg
Air throughput of fansExternal circuit 640 m3/h 710 m3/hInternal circuit 550 m3/h 640 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.400 189 Metal filters 1 3286.410 190 Door-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195
Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192
1) Delivery times available on request. 2) Motor circuit-breaker. Special voltages available on request. Technical modifications reserved.
QK .
QK/Pel.
89Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Wall-mounUseful cooling ou
Wal
l-mou
ted cooling unitstput 4000 W
1580
340500 145
195
nted
coo
ling
units
Supply includes:Nano-coated condintegral electronic evaporation. Fully for connection, inctemplate, eyebolt aparts.
enser and condensate wired ready luding drilling nd assembly
Note:External mounting and partial internal mounting of the cooling unit are available as standard. Partial internal mounting not possible with: – 600 mm wide TS enclosures and – 1200 mm wide TS enclosures
in the lockable door.
Also required:
When mounting in the door: Ride-up roller (TS 4538.000), see Cat. 32, page 967.When fitted with 180° hinges (TS 8800.710), see Cat. 32, page 961. When mounting in the side panel: Enclosure panel fasteners (TS 8800.071), see Cat. 32, page 918.
Approvals, see page 280.
Detailed drawing,see page 248.
Performance diagrams, available on the Internet.
Model No. SK with Basic controller, RAL 7035 3332.140
Model No. SK with Comfort controller, RAL 7035 3332.540
Model No. SK with Basic controller, stainless steel1) 3332.240
Model No. SK with Comfort controller, stainless steel1) 3332.640
Rated operating voltage V/Hz 400, 3~, 50/460, 3~, 60
Dimensions in mmWHD
500 1580 340
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
4000 W/4400 W3070 W/3570 W
Rated current max. 4.2 A/4.2 AStart-up current 9.2 A/11.0 APre-fuse T Motor circuit-breaker 6.3 A – 10.0 APower consumption Pelto DIN 3168
L 35 L 35L 35 L 50
1850 W/2250 W2120 W/2590 W
Refrigeration factor ε = L 35 L 35 2.1Refrigerant R134a, 3000 gPermissible operating pressure p. max. 28 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 91 kg
Air throughput of fansExternal circuit 2000 m3/hInternal circuit 1500 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.400 189 Metal filters 1 3286.410 190 Door-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192
1) Delivery times available on request. Special voltages available on request. Technical modifications reserved.
QK .
QK/Pel.
Accessories Page 171 Configuration software Page 195
90 Rittal System Climate Control
Design NEMA 4x, useful cooling output 500/1000/1500 W
Wall-mounted cooling units
ount
ed c
oolin
g un
its
298
358
405
1020
238
298
285
620
Supply includNano-coated partly integralcondensate ewired ready foincluding drillassembly par
m
es:condenser and electrical vaporation. Fully r connection,
ing template and ts.
Approvals, see page 282.
Detailed drawing,see page 249.
Performance diagrams, available on the Internet.
Model No. SK with Basic controller1) 3303.1043) 3303.1143) 3304.104 3304.114 3304.144 3305.104 3305.114 3305.1441) 3) 3)
Wal
l-
Model No. SK with Comfort controller 3303.504 3303.514 3304.504 3304.514 3304.544 3305.504 3305.514 3305.544Rated operating voltage V/Hz 230, 1~, 50/60
115, 1~,60
230, 1~,50/60
115, 1~,50/60
400, 3~, 50/ 460, 3~, 60
230, 1~, 50/60
115, 1~, 50/60
400, 3~, 50/460, 3~, 60
Dimensions in mmWHD
285 620 298
405 1020 358
405 1020 358
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
500 W/610 W 280 W/350 W
500 W280 W
1000 W/1060 W790 W/840 W
1500 W/1510 W1230 W/1250 W
Rated current max. 2.6/2.6 A 5.7 A 5.4/5.0 A 10.6/11.1 A 2.8/2.9 A 6.0/6.5 A 12.1/13.6 A 2.6/2.9 AStart-up current 5.1/6.4 A 11.5 A 12.0/14.0 A 26.0/28.0 A 11.5/12.7 A 22.0/24.0 A 42.0/46.0 A 12.2/11.3 A
Pre-fuse T 10.0 A 10.0 A 10.0 A 16.0 A 6.3 A – 10.0 A2) 16.0 A 20.0 A 6.3 A –
10.0 A2) Power consumption Pelto DIN 3168
L 35 L 35L 35 L 50
360/380 W420/390 W
470 W500 W
825/775 W875/835 W
850/800 W900/875 W
700/675 W785/800 W
975/1125 W1125/1285 W
1000/1175 W1165/1325 W
925/1100 W1085/1275 W
Refrigeration factor ε = L 35 L 35 1.4 1.7 1.8 1.7 1.9
Refrigerant R134a, 170 g R134a, 325 g R134a, 500 g R134a, 600 g
Permissible operating pressure p. max. 28 bar 25 bar 25 barTemperature and setting range +20°C to +55°CProtection rating NEMA 4xDuty cycle 100 %Type of connection Plug-in terminal stripWeight 25 kg 49 kg 54 kg 50 kg 51 kg 56 kg 52 kgMaterial Stainless steel 1.4404 (V4A) (AISI 316L)
Air throughput of fans
External circuit 345 m3/h 900 m3/h 900 m3/hInternal circuit 310 m3/h 600 m3/h 800 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)
Accessories Packs of Page
Door-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 – 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195
Interface card for Comfort controller 1 3124.200 179
Condensate hose 1 3301.610 3301.612 192 1) Delivery times available on request. 2) Motor circuit-breaker. 3) Without integral condensate evaporation. Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
91Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Wall-Design
Wal
l-m
mounted cooling units NEMA 4x, useful cooling output 2000/2500 W
1650
328
388
405
ount
ed c
oolin
g un
its
Supply iNano-coaintegral eevaporatfor connetemplate
Model No
ncludes:ted condenser and lectronic condensate ion. Fully wired ready ction, including drilling
and assembly parts.
Approvals, see page 282.
Detailed drawing,see page 250.
Performance diagrams, available on the Internet.
. SK with Basic controller1) 3328.104 3328.114 3328.144 3329.104 3329.114 3329.144
Model No. SK with Comfort controller1) 3328.504 3328.514 3328.544 3329.504 3329.514 3329.544
Rated operating voltage V/Hz 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50/ 460, 3~, 60 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50/
460, 3~, 60
Dimensions in mmWHD
405 1650 388
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
2000 W/2350 W1450 W/1690 W
2500 W/2750 W1600 W/1750 W
2500 W/2700 W1900 W/1950 W
Rated current max. 7.5 A/9.1 A 14.7 A/17.3 A 2.8 A/3.3 A 8.6 A/10.6 A 17.0 A/22.0 A 3.7 A/3.8 AStart-up current 22.0 A/26.0 A 36.0 A/39.0 A 6.8 A/7.8 A 21.0 A/21.0 A 44.0 A/42.0 A 6.8 A/7.6 APre-fuse T 16.0 A 25.0 A 6.3 A – 10.0 A2) 16.0 A 25.0 A 6.3 A – 10.0 A2) Power consumption Pelto DIN 3168
L 35 L 35L 35 L 50
1025/1200 W1250/1350 W
1085/1250 W1300/1410 W
1050/1275 W1275/1525 W
1450/1675 W1625/2000 W
1500/1725 W1675/2065 W
1425/1625 W1675/1975 W
Refrigeration factor ε = L 35 L 35 1.7 2.3 1.9 2.0Refrigerant R134a, 900 gPermissible operating pressure p. max. 28 barTemperature and setting range +20°C to +55°CProtection rating NEMA 4xDuty cycle 100 %Type of connection Plug-in terminal stripWeight 80 kg 87 kg 80 kg 83 kg 90 kg 83 kgMaterial Stainless steel 1.4404 (V4A) (AISI 316L)
Air throughput of fansExternal circuit 640 m3/h 710 m3/hInternal circuit 550 m3/h 640 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageDoor-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195
Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192
1) Delivery times available on request. 2) Motor circuit-breaker. Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
92 Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
for precision machine tools, useful cooling output 1000/1500 W
Wall-mounted cooling units
nted
coo
ling
units
105155
210
50
950
260400
These newcurrent reqsion machcludes higand a masweight. Thcreased sealso placeon supply cooling un
mou
devices meet the uirements of preci-
ine tools. This in-h acceleration values sive reduction in e associated in-nsitivity to vibration
s greater demands equipment such as its.
Supply includes:Nano-coated condenser and integral electronic condensate evaporation. Fully wired ready for connection, including drilling template and assembly parts.
Approvals, see page 283.
Detailed drawing,see page 248.
Performance diagrams, available on the Internet.
1)
Property rights: German registered design no. 402 02 325 IR reg. design no. DM/062 557 with validity for FR, IT, ES Indian registered design no. 190 269 Japanese registered design no. 1 187 905
Wal
l-
Model No. SK with Basic controller, RAL 7035 3304.142 3305.142Model No. SK with Comfort controller, RAL 70351) 3304.542 3305.542
Rated operating voltage V/Hz 400, 3~, 50/460, 3~, 60
400, 3~, 50/460, 3~, 60
Dimensions in mm WHD
400 950 260
400 950 260
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
1000 W/1060 W790 W/840 W
1500 W/1510 W1230 W/1250 W
Rated current max. 2.8 A/2.9 A 2.6 A/2.9 AStart-up current 11.5 A/12.7 A 12.2 A/11.3 APre-fuse T Motor circuit breaker 6.3 A – 10.0 APower consumption Pel to DIN 3168
L 35 L 35L 35 L 50
700 W/675 W785 W/800 W
925 W/1100 W1085 W/1275 W
Refrigeration factor ε = L 35 L 35 1.4 1.9Refrigerant R134a, 500 g R134a, 600 g Permissible operating pressure p. max. 25 barTemperature and setting range +20°C to +55°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 40 kg 42 kg
Air throughput of fansExternal circuit 900 m3/hInternal circuit 600 m3/h 800 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.400 189 Metal filters 1 3286.410 190 Door-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195
Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192
1) Delivery times available on request. Special voltages available on request. We reserve the right to make technical modifications.
QK .
QK/Pel.
Accessories Page 171 Configuration software Page 195
93Rittal System Climate Control
Wal
l-mou
Wall-mounted cooling unitsExplosion-proof cooling units for zone 22 (dust), useful cooling output 1000/1500 W
950
260400
nted
coo
ling
units
These cooespeciallyling the cliexplosive
ling units have been developed for control-mate in potentially dust Zone 22 sectors.
Supply includes:Nano-coated condenser. Fully wired ready for connection, including drilling template and assembly parts.
Approvals, see page 283.
Detailed drawing,see page 248.
Performance diagrams, available on the Internet.
Model No. SK with Basic controller, RAL 7035 3304.130 3304.160 3305.130 3305.160
Model No. SK with Comfort controller, RAL 7035 3304.530 3304.560 3305.530 3305.560
Rated operating voltage V/Hz 230, 50/60 400, 3~, 50/460, 3~, 60 230, 50/60 400, 3~, 50/460, 3~, 60
Dimensions in mm WHD
400 950 260
400 950 260
Useful cooling output to DIN 3168
L 35 L 35L 35 L 50
1000 W/1060 W790 W/840 W
1500 W/1510 W1230 W/1250 W
Rated current max. 4.8 A/4.4 A 2.5 A/2.6 A 5.4 A/6.0 A 2.3 A/2.6 AStart-up current 12.0 A/14.0 A 11.5 A/12.7 A 22.0 A/24.0 A 12.2 A/11.3 APre-fuse T 10.0 A/10.0 A 6.3 A – 10.0 A1) 16.0 A/16.0 A 6.3 A – 10.0 A1) Power consumption Pel to DIN 3168
L 35 L 35L 35 L 50
700 W/650 W750 W/710 W
580 W/550 W660 W/680 W
850 W/1000 W1000 W/1160 W
800 W/980 W960 W/1150 W
Refrigeration factor ε = L 35 L 35 1.4 1.7 1.8 1.9Refrigerant R134a, 325 g R134a, 500 g R134a, 600 gPermissible operating pressure p. max. 25 barTemperature and setting range +20°C to +50°C
Protection category to EN 60 529
External circuit IP 54Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 39 kg 41 kg
Air throughput of fansExternal circuit 900 m3/hInternal circuit 600 m3/h 800 m3/h
Temperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.400 189 Door-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 RiDiag II including cables for Comfort controller 1 3159.100 195Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192
Delievery times available on request. We reserve the right to make technical modifications.1) Motor circuit-breaker
QK .
QK/Pel.
94 Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
with CO2 as the coolant, useful cooling output 1000 W
Wall-mounted cooling units
Wal
l-mou
nted
coo
ling
units
105155
210
50
950
260400
Environmcoolant This genealready uas the cocooling p
Supply iNano-coaintegral eevaporatfor connetemplate
Model No
Rated opDimensioUseful coto DIN 31
entally friendly
ration of cooling units ses the alternative CO2 olant for generating the ower.
ncludes:ted condenser and lectronic condensate ion. Fully wired ready ction, including drilling
and assembly parts.
Approvals, see page 283.
Detailed drawing,see page 248.
. SK with Comfort controller 3304.740
erating voltage V/Hz 230, 50/60ns in mm WHD 400 x 950 x 260oling output 68 L 35 L 35 1000 W
Temperature and setting range +20°C to +40°C
Protection category to EN 60 529
External circuit IP 34Internal circuit IP 54
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 47 kgColour RAL 7035
Air throughput of fansExternal circuit 900 m3/hInternal circuit 600 m3/h
Temperature control Comfort controller (factory setting +35°C)Accessories Packs of PageFilter mats 3 3286.400 189 Metal filters 1 3286.410 190 Door-operated switch 1 4127.000 176Air-ducting system 1 – 174 Cover stoppers for interior air outlet 2 – 175 Condensate hose 1 3301.612 192
We reserve the right to make technical modifications. Other specifications available upon request.
QK .
95Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Ther
moe
lect
ric
cool
ers
96
Thermoelectric coolers
The powerful thermoelectric unit in a light-weight
design is the eco-friendly climate-control solution for
command panels and small enclosures producing
energy savings of more than 60 % compared with
conventional industry systems.
Internal mountingWhen installed in the enclosure, the unit only protrudes by a few millimetres, and therefore does not interrupt either the aesthetic appearance or freedom of move-ment on support arm systems.External mountingIts low weight also allows it to be externally mounted on simple aluminium rear panels or blanking panels.
Scalable output The modular designs allows simple scaling of the cooling output depending on your requirements.
Rittal System Climate Control
Useful cooling output 100 W
Thermoelectric coolers
B = WidthT = Depth
Ap
herm
oele
ctri
c co
oler
s
plication: ● Ideal for cooling small
enclosures and command panels.
● Especially suitable for use on support arm systems as well.
● Optimum space utilisation. ● Targeted cooling of hot-spots. ● RJ45 interface for connecting
to the Rittal CMC system
Supply includes:Thermoelectric cooling unit, wired ready for connection, with multilingual documentation and mounting accessories.
Approvals, see page 284.
Detailed drawing,see page 250.
T
Model No. SK 3201.200 3201.300Dimensions in mmWHD
125 400 155
Rated operating voltage V/Hz 100 – 230 V (AC) 24 V DCRefrigeration factor/COP L 35 L 35 1.0 1.2Useful cooling output to DIN 3168 L 35 L 35 100 W 100 W
Power pack integrated � – Colour of cover/unit RAL 7024/Anodised aluminiumProtection rating IP 54Weight 3.0 kg 2.5 kgTemperature range 0°C to +55°C 0°C to +55°C Air throughput, unimpeded air flow 50 m3/hType of connection Plug-in spring connection terminalPre-fuse gG 2 A 10 AAccessories Packs of PagePower pack 150 watts for 35 mm top-hat rail 1 – 3201.030 192 Filter mat 1 3201.050 191 Door-operated switch 1 4127.010 176Digital temperature indicator 1 3114.100/3114.115 3114.024 177 CMC monitoring system See Cat. 32, from page 808. Condensate hose, ∅ 6 mm 1 St. 3301.606 –
We reserve the right to make technical modifications. Special voltages available on request.
QK .
Innovative controlThe PID control ensures opti-mum activation of the Peltier elements and fans. Speed and output are energy-efficiently adjusted to the optimum operat-ing point thanks to pulse width modulation.
97Rittal System Climate Control
Accessories Page 171 Configuration software Page 195
Liquid cooling IE
Air/water heat exchangers from page 100
� � � Roof-mounted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2500 W. . . . . . . 102� � � Roof-mounted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4000 W. . . . . . . 103
� � � Micro, wall-mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 W. . . . . . . 104� � Wall-mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600/1250 W. . . . . . . 105
� � � Wall-mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500/1000 W. . . . . . . 106� � � Wall-mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000/3000 W. . . . . . . 107� � � Wall-mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5000 W. . . . . . . 108
� Wall-mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7000 W. . . . . . . 109
E
Water-carrying parts Suitable for command panels Wall-mounted
Rittal System Clima
stainless steel
Standardised installation Roof-mounted
E
qu
id c
oo
ling
IE
Direct Cooling Package from page 110
� � Cold Plate for frequency converters. . . . . . . . . . 2500 – 6000 W. . . . . . . 112� � � Cold Plate for frequency converters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113� � Cooling Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 – 900 W. . . . . . . 114
� Panel Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150/350 W. . . . . . . 115
E
Stainless steel Suitable for command panelsE
Li
Standardised installation Manufacturer-specific
Medium to be cooled: Water
Medium to be cooled: Oil
Medium to be cooled: Emulsion
Roof-mounted
Wall-mounted
Fast delivery range
W
Ö
E
Recooling systems from page 116
� Mini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/1.5 kW. . . . . . . 118� Mini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4.5 kW. . . . . . . 119� Mini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 kW. . . . . . . 120� � Power Fluid Cooler . . . . . . . . . . . . . . . . . . . . . . . . . 7.5 to 59 kW. . . . . . . 121� In floor-standing enclosure. . . . . . . . . . . . . . . . . . . 2.1 to 36 kW. . . . . . . 123� Power Fluid Cooler . . . . . . . . . . . . . . . . . . . . . . . . 68 to 502 kW. . . . . . . 125� In TS 8 Top enclosure system . . . . . . . . . . . . . . . . . 6 to 25 kW. . . . . . . 127� � Mini for wall mounting. . . . . . . . . . . . . . . . . . . . . . . . 1/2.5/4 kW. . . . . . . 129
� � In floor-standing enclosure. . . . . . . . . . . . . . . . . . . 2.5 to 26 kW. . . . . . . 130
Immersible recooling systems from page 116
� Immersible recooling systems . . . . . . . . . . . . . . . 2.4 to 5.6 kW. . . . . . . 132� Immersible recooling systems . . . . . . . . . . . . . . 8.5 to 17.3 kW. . . . . . . 133� Immersible recooling systems . . . . . . . . . . . . . . . . 21 to 78 kW. . . . . . . 134
� Immersible recooling systems . . . . . . . . . . . . . . . 2.4 to 5.6 kW. . . . . . . 132� Immersible recooling systems . . . . . . . . . . . . . . 8.5 to 17.3 kW. . . . . . . 133� Immersible recooling systems . . . . . . . . . . . . . . . . 21 to 78 kW. . . . . . . 134
W Ö E
W Ö E
99te Control
Air
/wat
er h
eat e
xcha
nger
s
Air/water heat exchangers
The air of the enclosure interior may also be cooled to
below the level of the external temperature, if required,
by using cooling water from a central recooling
system. The ingress of dust from outside into the
cooled enclosure is prevented. The waste heat from
the enclosure does not raise the temperature of the
ambient air, provided the heat exchanger and cold
water supply system are spatially separated from one
another.
100 Rittal System Climate Control
Climate control platform strategy Identical mounting interface for cooling units and air/water heat exchangers. In this way, the device type and cooling output are easily varied.
VariantsRoof mountedEspecially for bayed enclosures, where wall-mounted devices would obstruct the door.
Wall mountedFor mounting on the wall or any sufficiently large vertical surface.
Rittal System Climate Control
Air
/wat
er h
eat e
xcha
nger
s
Effective in extreme conditionsAir/water heat exchangers can also be used at particularly extreme ambient tempera-tures from +1° to +70°C. Even extreme lev-els of contamination in the ambient air, e.g. with dust and oil, do not affect functionality. High heat losses are dissipated in the most confined spaces without emitting them directly to the ambient air. A high operating ratio is achieved, thanks to the large surface area of the heat exchanger unit.
Basic controller● Visualisation of the operating status via
LED display ● Switching hysteresis: 5 K● Floating fault signal contact in case of
overtemperature● Setpoint externally adjustable via poten-
tiometer (setting range 20°C – 55°C)
Comfort controller● Switching hysteresis: 2 – 10 K
preset to 5 K● System alarm, individually configurable for
2 floating fault signal contacts● Visualisation of the current enclosure
internal temperature and all system messages on the display
● Storage of all system statuses in the log file
● Optional extension card for integration into superordinate remote monitoring systems e.g. with CMC
Benefits at a glance● Useful cooling output from 300 W to
7000 W● Suitable for use even under extreme
conditions and at ambient temperatures of up to +70°C
● Also available with all water-carrying parts made from V4A
● System for TS 8 integrated into the side panel
● High protection category. Thanks to the sealed design, a protection category of IP 55 to EN 60 529 is achieved.
ImportantAir/water heat exchangers should always be used in conjunction with recooling systems or a cooling water circuit.
Tips and tricksApplications see page 217
Selection criteria see page 218
Assembly see page 219
Air routing see page 220/221
Condensate management see page 222/223
Electrical connection and control see page 224/225
101
Air
/wat
er h
eat e
xc
Air/water heaRoof-mounted, usef
t exchangersul cooling output 2500 W
2
1
475 597
417
390 490
hang
ers
Supply Fully wirewith contemplateassembl
Als
Cooling Rittal recfrom pag
includes:d ready for connection,
nector, including drilling , sealing mat and y parts.
o required:
water system such as ooling systems, e 116.
Condensate discharge 1/2˝ (flexible)
Cooling water connection 1/2˝ (flexible)
Approvals, see page 284.
Detailed drawing,see page 251.
Performance diagrams, available on the Internet.
Property rights: German registered designs no. 402 02 324 and no. 402 02 325 US design patent no. US D 492,319S Indian registered design no. 189 956 Chinese registered design no. ZL 0330 6415.6
1
2
Water-carrying parts
Model No. SK Basic controller CuAL 3209.100 3209.110 3209.1401)
Model No. SK Comfort controller CuAL 3209.500 3209.510 3209.5401)
Useful cooling output CuAL L 35 W 10, 400 l/h 2500 W
Model No. SK Basic controller V4A (stainless steel) 3209.1041) 3209.1141) 3209.1441)
Model No. SK Comfort controller V4A (stainless steel) 3209.5041) 3209.5141) 3209.5441)
Useful cooling output V4A L 35 W 10, 400 l/h 1875 W
Rated operating voltage V, Hz 230, 50/60 115, 50/60 400, 2~, 50/60
Dimensions in mmWHD
597417475
Rated current max. 0.40 A/0.48 A 0.85 A/0.95 A 0.25 A/0.30 APre-fuse T 4.0 ACooling medium Water (refer to specifications on the Internet; assembly instructions chapter 13)Water inlet temperature > +1°C to +30°CPermissible operating pressure p. max. 1 to 10 barTemperature range +1°C to +70°CProtection category to EN 60 529 IP 552)
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 23.5 kg 27.5 kg 27.5 kgColour RAL 7035Air throughput of fans (unimpeded air flow) 1030 m3/hTemperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageDoor-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 Interface card for Comfort controller 1 3124.200 179 Air ducting system 1 3286.870 174 Cover stoppers for interior air outlet 1 3286.880 175 Condensate hose 1 3301.612 192 Flow regulator valve 1 See accessories 194
1) Delivery times available on request. 2) IP 65 available on request. Special voltages available on request. We reserve the right to make technical modifications.
102 Rittal System Climate Control
Accessories Page 171 Recooling systems Page 116 Configuration software Page 195
Roof-mounted, useful cooling output 4000 W
Air/water heat exchangers
nger
s
2
1
475 597
417
390 490
SupplyFully wiwith cotemplatassemb
A
CoolingRittal refrom pa
xcha
includes:red ready for connection, nnector, including drilling e, sealing mat and ly parts.
lso required:
water system such as cooling systems, ge 116.
Condensate discharge 1/2˝ (flexible)
Cooling water connection 1/2˝ (flexible)
Approvals, see page 284.
Detailed drawing,see page 251.
Performance diagrams, available on the Internet.
Property rights:German registered designs no. 402 02 324 and no. 402 02 325 US design patent no. US D 492,319S Indian registered design no. 189 956 Chinese registered design no. ZL 0330 6415.6
1
2
Air
/wat
er h
eat e
Accessories Page 171 Recooling systems Page 116 Configuration software Page 195
Water-carrying parts
Model No. SK Basic controller CuAL 3210.100 3210.110 3210.1401)
Model No. SK Comfort controller CuAL 3210.500 3210.510 3210.5401)
Useful cooling output CuAL L 35 W 10, 400 l/h 4000 W
Model No. SK Basic controller V4A (stainless steel) 3210.1041) 3210.1141) 3210.1441)
Model No. SK Comfort controller V4A (stainless steel) 3210.5041) 3210.5141) 3210.5441)
Useful cooling output V4A L 35 W 10, 400 l/h 3000 W
Rated operating voltage V, Hz 230, 50/60 115, 50/60 400, 2~, 50/60
Dimensions in mmWHD
597417475
Rated current max. 0.44 A/0.5 A 0.9 A/1.0 A 0.25 A/0.3 APre-fuse T 4.0 ACooling medium Water (refer to specifications on the Internet; assembly instructions chapter 13)Water inlet temperature > +1°C to +30°CPermissible operating pressure p. max. 1 to 10 barTemperature range +1°C to +70°CProtection category to EN 60 529 IP 552)
Duty cycle 100 %Type of connection Plug-in terminal stripWeight 25.5 kg 29.5 kg 29.5 kgColour RAL 7035Air throughput of fans (unimpeded air flow) 925 m3/hTemperature control Basic or Comfort controller (factory setting +35°C)Accessories Packs of PageDoor-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 Interface card for Comfort controller 1 3124.200 179 Air ducting system 1 3286.870 174 Cover stoppers for interior air outlet 1 3286.880 175 Condensate hose 1 3301.612 192 Flow regulator valve 1 See accessories 194
1) Delivery times available on request. 2) IP 65 available on request. Special voltages available on request. We reserve the right to make technical modifications.
103Rittal System Climate Control
Air/water heaMicro, wall-mounted
Air
/wat
er h
eat e
xcha
nger
s
t exchangers, useful cooling output 300 W
85
300
150
12
85
300
150
12
Espe
cially for selective cooling of hot-spots in small enclosures.Supply includes:Fully wired ready for connection, including drilling template and assembly parts.
Condensate discharge 3/8˝
Cooling water connection 3/8˝
Approvals, see page 284.
Detailed drawing,see page 251.
Performance diagrams, available on the Internet.
1
2
Model No. SK 3212.230 3212.1151) 3212.024
Rated operating voltage V, Hz 230, 50/60 115, 50/60 24 V (DC)
Dimensions in mmWHD
15030085
Useful cooling output L 35 W 10, 200 l/h 300 W
Rated current max. 0.11 A/0.13 A 0.23 A/0.24 A 1.20 APre-fuse T 4.0 ACooling medium Water (refer to specifications on the Internet; assembly instructions chapter 12)Water inlet temperature > +1°C to +30°CPermissible operating pressure p. max. 1 to 10 barTemperature range +1°C to +70°CProtection category to EN 60 529 IP 552)
Duty cycle 100 %Type of connection Connection clampWeight 3 kgColour RAL 7035Air throughput of fans (unimpeded air flow) 280 m3/h 250 m3/hAccessories Packs of PageTemperature indicator 1 3114.100 177 Door-operated switch 1 4127.000 176Condensate hose 1 3301.612 192 Flow regulator valve 1 See accessories 194
1) Delivery times available on request. 2) IP 65 available on request. Special voltages available on request. We reserve the right to make technical modifications.
104 Rittal System Climate Control
Accessories Page 171 Recooling systems Page 116 Configuration software Page 195
Wall-mounted, useful cooling output 600/1250 W
Air/water heat exchangers
100
500
200
12
100
950
200
12
Supply in
ange
rs
cludes:Fully wired ready for connection, with terminal strip, including drilling template, sealing mat and assembly parts.
Also required:
Cooling water system such as Rittal recooling systems, see page 116 onwards.
Condensate discharge 1/2˝
Cooling water connection 1/2˝
Approvals, see page 285.
Detailed drawing, see page 251/252.
Performance diagrams, available on the Internet.
1
2
Air
/wat
er h
eat e
xch
Model No. SK 3214.100 3215.100
Rated operating voltage V, Hz 230, 50/60
Dimensions in mmWHD
200 500 100
200950100
Useful cooling output L 35 W 10, 200 l/hL 35 W 10, 400 l/h
600 W650 W
1250 W1300 W
Rated current max. 0.17 A/0.18 A 0.38 A/0.4 APre-fuse T 2.0 A 4.0 ACooling medium Water (refer to specifications on the Internet; assembly instructions chapter 12)Water inlet temperature > +1°C to +30°CPermissible operating pressure p. max. 1 to 10 barTemperature range +1°C to +70°CProtection category to EN 60 529 IP 551) Duty cycle 100 %Type of connection Terminal stripWeight 7 kg 13 kgColour RAL 7035Air throughput of fans 120 m3/h 200 m3/hTemperature control Thermostat-controlled magnetic valve
Temperature monitoring Internal thermostat, with change-over contact, switching load 16 A, setting range +20°C to +60°C (factory setting +35°C)
Accessories Packs of PageTemperature indicator 1 3114.100 177 Door-operated switch 1 4127.000 176Condensate hose 1 3301.612 192 Flow regulator valve 1 See accessories 194
1) IP 65 available on request. Special voltages available on request. We reserve the right to make technical modifications.
105Rittal System Climate Control
Accessories Page 171 Recooling systems Page 116 Configuration software Page 195
Air/wateWall-mount
Air
/wat
er h
eat e
xcha
r heat exchangersed, useful cooling output 500/1000 W
142
550
280
2
1
92
550
280
2
1
nger
s
SupplyFully wiwith cotemplatassemb
includes:red ready for connection, nnector, including drilling e, sealing mat and ly parts.
Also required:
Cooling water system such as Rittal recooling systems, from page 116.
Approvals, see page 285.
Detailed drawing,see page 252.
Performance diagrams, available on the Internet.
Cooling water connection 1/2˝
Condensate discharge 1/2˝
1
2
Water-carrying parts
Model No. SK Basic controller CuAL 3363.100 3363.1101) 3363.1401) 3364.100 3364.1101) 3364.1401)
Model No. SK Comfort controller CuAL 3363.500 3363.5101) 3363.5401) 3364.500 3364.5101) 3364.5401)
Useful cooling output CuAL L 35 W 10, 400 l/h 500 W 1000 W
Model No. SK Basic controller V4A (stainless steel) 3363.1041) 3363.1141) 3363.1441) 3364.1041) 3364.1141) 3364.1441)
Model No. SK Comfort controller V4A (stainless steel) 3363.5041) 3363.5141) 3363.5441) 3364.5041) 3364.5141) 3364.5441)
Useful cooling output V4A L 35 W 10, 400 l/h 375 W 750 W
Rated operating voltage V, Hz 230, 1~,50/60
115, 1~,50/60
400, 2~, 50/60
230, 1~,50/60
115, 1~,50/60
400, 2~, 50/60
Dimensions in mmWHD
28055092
280550142
Rated current max. 0.17 A/0.18 A 0.35 A/0.40 A 0.1 A/0.12 A 0.2 A/0.19 A 0.4 A/0.38 A 0.12 A/0.11 APre-fuse T 4.0 A 4.0 A3) 4.0 A 4.0 A3) Cooling medium Water (refer to specifications on the Internet; assembly instructions chapter 13)Water inlet temperature +1°C to +30°CPermissible operating pressure p. max. 1 to 10 barTemperature range +1°C to +70°CProtection category to EN 60 529 IP 552) Duty cycle 100 %Type of connection Plug-in terminal stripWeight 12 kg 15 kgColour RAL 7035Air throughput of fans (unimpeded air flow) 270/320 m3/hTemperature control Basic or Comfort controller (factory setting +35°C) Accessories Packs of PageDoor-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192 Flow regulator valve 1 See accessories 194
1) Delivery times available on request. 2) IP 65 available on request. 3) 2-pole miniature circuit breaker Special voltages available on request. We reserve the right to make technical modifications.
106 Rittal System Climate Control
Accessories Page 171 Recooling systems Page 116 Configuration software Page 195
Wall-mounted, useful cooling output 2000/3000 W
Air/water heat exchangers
hang
ers
142
950
400
2
1
Supply Fully wirewith contemplateassembl
includes:d ready for connection,
nector, including drilling , sealing mat and y parts.
Also required:
Cooling water system such as Rittal recooling systems, from page 116.
Approvals, see page 285.
Detailed drawing,see page 253.
Performance diagrams, available on the Internet.
Cooling water connection 1/2˝
Condensate discharge 1/2˝
1
2
Air
/wat
er h
eat e
xc
1 Water-carrying parts
Model No. SK Basic controller CuAL 3373.100 3373.1101) 3373.1401) 3374.100 3374.1101) 3374.1401)
Model No. SK Comfort controller CuAL 3373.500 3373.5101) 3373.5401) 3374.500 3374.5101) 3374.5401)
Useful cooling output CuAL L 35 W 10, 400 l/h 2000 W 3000 W
Model No. SK Basic controller V4A (stainless steel) 3373.1041) 3373.1141) 3373.1441) 3374.1041) 3374.1141) 3374.1441)
Model No. SK Comfort controller V4A (stainless steel) 3373.5041) 3373.5141) 3373.5441) 3374.5041) 3374.5141) 3374.5441)
Useful cooling output V4A L 35 W 10, 400 l/h 1500 W 2250 W
Rated operating voltage V, Hz 230, 1~,50/60
115, 1~,50/60
400, 2~, 50/60
230, 1~,50/60
115, 1~,50/60
400, 2~, 50/60
Dimensions in mmWHD
400950142
Rated current max. 0.38 A/0.43 A 0.75 A/0.85 A 0.22 A/0.25 A 0.57 A/0.78 A 1.15 A/1.55 A 0.35 A/0.45 APre-fuse T 4.0 A 4.0 A3) 4.0 A 4.0 A3) Cooling medium Water (refer to specifications on the Internet; assembly instructions chapter 13)Water inlet temperature +1°C to +30°CPermissible operating pressure p. max. 1 to 10 barTemperature range +1°C to +70°CProtection category to EN 60 529 IP 552) Duty cycle 100 %Type of connection Plug-in terminal stripWeight 20 kgColour RAL 7035Air throughput of fans (unimpeded air flow) 600/625 m3/h 700/730 m3/hTemperature control Basic or Comfort controller (factory setting +35°C) Accessories Packs of PageDoor-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192 Flow regulator valve 1 See accessories 194
1) Delivery times available on request. 2) IP 65 available on request. 3) 2-pole miniature circuit breaker Special voltages available on request. We reserve the right to make technical modifications.
107Rittal System Climate Control
Accessories Page 171 Recooling systems Page 116 Configuration software Page 195
Air/water heWall-mounted, use
Air
/wat
er h
eat e
xcha
at exchangersful cooling output 5000 W
250
1400
450
2
1
nger
s
SupplyFully wiwith cotemplatassemb
includes:red ready for connection, nnector, including drilling e, sealing mat and ly parts.
Also required:
Cooling water system such as Rittal recooling systems, from page 116.
Approvals, see page 285.
Detailed drawing,see page 253.
Performance diagrams, available on the Internet.
Cooling water connection 1/2˝
Condensate discharge 1/2˝
1
2
Water-carrying parts
Model No. SK Basic controller CuAL 3375.100 3375.1101) 3375.1401)
Model No. SK Comfort controller CuAL 3375.500 3375.5101) 3375.5401)
Useful cooling output CuAL L 35 W 10, 400 l/h 5000 W
Model No. SK Basic controller V4A (stainless steel) 3375.1041) 3375.1141) 3375.1441)
Model No. SK Comfort controller V4A (stainless steel) 3375.5041) 3375.5141) 3375.5441)
Useful cooling output V4A L 35 W 10, 400 l/h 3750 W
Rated operating voltage V, Hz 230, 1~, 50/60 115, 1~, 50/60 400, 2~, 50/60
Dimensions in mmWHD
450 1400 250
Rated current max. 1.0 A/1.35 A 2.0 A/2.7 A 0.6 A/0.8 APre-fuse T 4.0 A 4.0 A3) Cooling medium Water (refer to specifications on the Internet; assembly instructions chapter 13) Water inlet temperature +1°C to +30°CPermissible operating pressure p. max. 1 to 10 barTemperature range +1°C to +70°CProtection category to EN 60 529 IP 552) Duty cycle 100 %Type of connection Plug-in terminal stripWeight 56 kg 59 kgColour RAL 7035Air throughput of fans (unimpeded air flow) 2365/2750 m3/hTemperature control Basic or Comfort controller (factory setting +35°C) Accessories Packs of PageDoor-operated switch 1 4127.000 176SK BUS system for Comfort controller 1 3124.100 180 Interface card for Comfort controller 1 3124.200 179 Condensate hose 1 3301.612 192 Flow regulator valve 1 See accessories 194
1) Delivery times available on request. 2) IP 65 available on request. 3) 2-pole miniature circuit breaker Special voltages available on request. We reserve the right to make technical modifications.
108 Rittal System Climate Control
Accessories Page 171 Recooling systems Page 116 Configuration software Page 195
Wall-mounted, useful cooling output 7000 W
Air/water heat exchangers
300
1800
450
12
Su
s
pply includes:Fully wired ready for connection, with terminal strip, including drilling template, sealing mat and assembly parts.
Also required:
Cooling water system such as Rittal recooling systems, from page 116.
Condensate discharge 1/2˝
Cooling water connection 1/2˝
Approvals, see page 285.
Detailed drawing,see page 254.
Performance diagrams, available on the Internet.
1
2
Model No. SK 3216.4801)
Air
/wat
er h
eat e
xcha
nger
Rated operating voltage V, Hz 400, 3~, 50/60 480, 3~, 60Dimensions in mmWHD
450 1800 300
Useful cooling output L 35 W 10, 500 l/hL 35 W 20, 500 l/h
7000 W4500 W
Rated current max. 1.4 A/1.6 A 1.2 APre-fuse T 4.0 A, 3-pole Power consumption Pel 450 W/700 W 630 WCooling medium Water (refer to specifications on the Internet; assembly instructions chapter 12)Water inlet temperature +1°C to +30°CPermissible operating pressure p. max. 1 to 10 barTemperature range +1°C to +70°CProtection category to EN 60 529 IP 552) Duty cycle 100 %Type of connection Terminal stripWeight 79 kgColour RAL 7035Air throughput of fans 2400 m3/hTemperature control Thermostat-controlled magnetic valveAccessories Packs of PageTemperature indicator 1 3114.100 177 Door-operated switch 1 4127.000 176Condensate hose 1 3301.612 192 Flow regulator valve 1 See accessories 194
1) Delivery times available on request. 2) IP 65 available on request. Special voltages available on request. We reserve the right to make technical modifications.
Adaptor frameFor mounting the air/water heat exchanger SK 3216.480 on side panels of 500 mm deep TS enclosures.
Material:Sheet steel
Colour:RAL 7035
Detailed drawing, see page 254.
Packs of Model No. SK
1 3216.470
Accessories Page 171 Recooling systems Page 116 Configuration software Page 195
109Rittal System Climate Control
Dir
ect c
oolin
g pa
ckag
e
Direct cooling package
Power electronic components can be cooled
particularly effectively using the liquid cooled DCP
mounting plate. Heat losses are cleverly dissipated
from the enclosure or housing without compromising
the high enclosure protection category in any way.
Furthermore, liquid cooling is both quiet and
1000 times more efficient than heat dissipation
via air.
110
y p e Te s te
The Rittal DCP Cold Plate has received type-tested certification from the TÜV inspection authority and is approved for pressures up to 10 bar.
Rittal System Climate Control
Dir
ect c
oolin
g pa
ckag
e
AssemblyHeight and depth-variable mount-ing positions are offered by the system punchings of the TS 8 profiles in conjunction with punched section with mounting flange 17 x 73 mm (for the outer mounting level).
Rittal System Climate Control
AssemblyAttachment directly in the T-slotDirect and fast mounting using sliding nuts for components with suitable dimensions. Direct earthing or equipotential bonding points may be provided on the Cold Plate.
Attachment with variable clamping systemSupports fast mechanical installation with-out the need for drilling, independently of the original attachment points on the compo-nent. For use with a wide range of models and makes.
AssemblyAttachment with retainersFrequency converters with dimensions marginally smaller than the T-slot spacing can be secured with special retainers.
Attachment with tapped holesPower electronics can be mounted at any position over the whole surface by drilling tapped holes up to max. 12 mm in depth.
Benefits at a glance● High surface quality (Ra = 1.2 μm) to
reduce thermal resistance● No vibrations from compressors and fans● Ideal for precision machine tools● No noise generation● No top-mounted parts on the enclosure● Enclosure may be installed in the
machine base and in niches● The protection category of the enclosure
is preserved● Mounting surface on both sides may be
used as a contact surface for heat dissipation
● Space-saving configuration of electronic components in the enclosure
ImportantManufacturer or customer-specific Cold Plates may be supplied on a project-related basis on request.
111
DC
P –
Dir
ect C
oolin
g P
acka
ge
DCP – Direct Cooling Cold Plate for frequency converter
112
Packages
B
T
H
B = WidthT = Depth
Wi
thout T-slotLiquid-cooled partial mounting plate with drilling surfaceWhole surface can be used by the customer for own tapped holes (blind holes) to a maxi-mum drilling depth of 12 mm.With T-slotLiquid-cooled partial mounting plate for fastening with a variable clamping systemFast mounting of converters with system fastening and additional possibility for tapped holes (blind holes) to a maximum drilling depth of 8 mm.
Version:Press-fitted copper or stainless steel tubes, dependent on the application, in closed recooling systems or existing (open) water circuit. Cooling water connec-tion: G 1/4˝, anti-twist.
Supply includes:Mounting accessories for system integration into TS.
Accessories:
Accessories for fluid distribution connection, see page 184.
TS punched section with mount-ing flange 17 x 73 mm for the external mounting level, see Catalogue 32, page 1023.
Recooling systems for closed cooling circuits, see from page 116.
Further technical information is available at www.rittal.com/dcp
Approvals, see page 286.
Detailed drawing,see page 255.
Without T-slot
With T-slot
Model No. DCP 8616.610 8616.630 8616.810 8616.830 8616.0102) 8616.0302) 8616.2102) 8616.2302)
For installation in Enclosure width mm 600 600 800 800 1000 1000 1200 1200Enclosure depth (side) mm 600 600 800 800 1000 1000 – –
Dimensions in mmWHD
499 399 25
499 399 25
699 399 25
699 399 25
899 399 25
899 399 25
1099 399 25
109939925
Output1) 2500 W 2500 W 3000 W 3000 W 5000 W 5000 W 6000 W 6000 W
Material CU VA CU VA CU VA CU VAPacks of 1 1 1 1 1 1 1 1
1) At 25°C medium inlet temperature, DCP surface temperature ≈ 50°C, medium flowrate = 200 l/h, surface roughness: 1.2 μm. 2) Delivery times available on request.
Model No. DCP 8616.600 8616.620 8616.800 8616.820 8616.0002) 8616.0202) 8616.2002) 8616.2202)
For installation in Enclosure width mm 600 600 800 800 1000 1000 1200 1200Enclosure depth (side) mm 600 600 800 800 1000 1000 – –
Dimensions in mmWHD
499 399 20
499 399 20
699 399 20
699 399 20
899 399 20
899 399 20
1099 399 20
109939920
Output1) 2500 W 2500 W 3000 W 3000 W 5000 W 5000 W 6000 W 6000 W
Material CU VA CU VA CU VA CU VAPacks of 1 1 1 1 1 1 1 1
1) At 25°C medium inlet temperature, DCP surface temperature ≈ 50°C, medium flowrate = 200 l/h, surface roughness: 1.2 μm. 2) Delivery times available on request.
Q.
Q.
Recooling systems page 116 Accessories page 184
Rittal System Climate Control
Cold Plate
Rittal System Climate Control
for frequency converters, manufacturer-specific
DCP – Direct Cooling Package
B
T
H
B = WidthT = Depth
Sie
ng P
acka
ge
mens SINAMICS S120 series BooksizePre-manufactured tapped holes on a 50 mm pitch pattern for attaching the S120 modules. For the design of SINAMICS drive modules in the S120 series, please contact your local Siemens agent.
Danfoss frequency converters VLT� Automation Drive FC300 for enclosure sizes A2 (0.37 – 4 kW/380 – 500 V) A3 (5.5 – 7.5 kW/380 – 500 V) with a channel spacing of 257 mm may be used.
Approvals, see page 286.
Detailed drawing,see page 255.
DC
P –
Dir
ect C
ooli
Version Siemens SINAMICS S120 Booksize Danfoss VLT� Automation Drive FC300
Model No. DCP 8616.640 8616.6411) 8616.840 8616.8411) 8616.6501) 8616.6511) 8616.8501) 8616.8511)
For installation in Enclosure width mm 600 600 800 800 600 600 800 800Enclosure depth mm 600 600 800 800 600 600 800 800
Dimensions in mmWHD
499 44920
499 44920
699 44920
699 44920
499 299 20
499 299 20
699 299 20
699 299 20
Material CU VA CU VA CU VA CU VAPacks of 1 1 1 1 1 1 1 1
Special sizes available on request. Surface roughness: 1.2 μm. Rear: Press-fitted copper or stainless steel tubes, dependent on the application, in closed recooling systems or existing (open) water infrastructure. Cooling water connection: G 1/4˝, anti-twist. 1) Delivery times available on request.
Recooling systems page 116 Accessories page 184
113
DC
P –
Dir
ect C
oolin
g P
acka
ge
DCP – Direct Cooling PackageCooling Unit
2
H
B
T
B = WidthT = Depth
1
Th
e Cooling Unit is available in two variants. As add-on in conjunction with a Rittal Cold Plate or as a stand-alone unit with press-fitted pipework in the cooler. The optional housing for the cooler ensures even more efficient air routing and thus reliable cooling of the air inside the enclosure.Functional principle: The warm air inside the enclo-sure is drawn in by a powerful radial fan and passed through the cooler.
The unit can be operated either indirectly, i.e. mounted on a Rittal Cold Plate, or as a fully autonomous system with its own cooling water circulation. The latter supports direct mounting on the mounting plate in the immediate vicinity of major heat loss sources. In this variant, additional copper or stainless steel tubes are press-fitted into the cooler.
Convincing arguments: ● Direct cooling of power
electronics on the Rittal Cold Plate and lowering of the enclosure internal temperature
● Decentralised cooling of high-performance power electronics
● No change to the existing protection category of the enclosure
Approvals, see page 286.
Further technical information is available at www.rittal.com/dcp
1
2
Version Add-on Stand-alone
Model No. DCP 8616.500 8616.5101) 8616.5502) 8616.5602)
Dimensions in mmWHD
252 572 205
252 572 205
252 572 205
252 572 205
Power 400 W 800 W 500 W 900 W
Packs of 1 1 1 11) Space required behind the DCP = 110 mm 2) Cooling unit as stand-alone unit with its own fluid connection (2 x G 1/4˝), anti-twist. Delivery times available on request.
1 2
Recooling systems page 116 Accessories page 184
114 Rittal System Climate Control
Rittal System Climate Control
Panel Cooling
DCP – Direct Cooling Package
B
H
T
B = WidthT = Depth
Th
irec
t Coo
ling
Pac
kage
is integrated Panel Cooling solution was developed by Rittal for optimum, space-saving cooling of operating housings. Heat losses of approx. 150 – 350 W can be dissipated without the need for external add-ons. The high protection category of the enclosure is retained, thanks to the fluid connection at the rear of the panel.
Functional principle: The fan unit with six individual fans ensures optimum air circu-lation at the cooler for efficient dissipation of the heat losses arising in the housing. The unit can be connected either to an existing coolant circuit or else to an external recooling system.
Convincing arguments: ● High performance with
minimal space requirements ● No reduction of the original
protection category ● No external add-ons
necessary
Operating housing cooling e.g. for the Comfort Panel and for special enclosures such as stainless steel enclosures for the food and consumables industry. Cooling units may be ordered for heat losses of up to 350 W on a project-specific basis.
Approvals, see page 287.
Further technical winformation is available at www.rittal.com/dcp
DC
P –
D
Model No. DCP 8616.300 8616.310
Dimensions in mmWHD
300 250 50
400 300 60
Power 150 W 350 W
Packs of 1 1Delivery times available on request.
Recooling systems page 116
115
Rec
oolin
g sy
stem
s IE
Recooling systems IE
Recooling systems ensure centralised, efficient cooling
and supply of the cooling medium (generally water). All
cooling tasks on a system or machine can be solved
via a single pipeline system.
Spatial separation between cooling production and
process cooling can be achieved with recooling
systems.
116 Rittal System Climate Control
Rittal Syste
Rec
oolin
g sy
stem
s IE
NEW
Fast delivery range up to 50 kW ● Standardised versions ● Basic version available off-the-shelf ● Shorter delivery times for defined
options
m Climate Control
Application diversity of centralised cooling technologyEnclosure coolingIn conjunction with air/water heat exchang-ers, optimum dissipation of high heat loads is guaranteed, even under extreme ambient temperatures and air contamination levels.
Cooling of liquid mediaThe direct and indirect cooling of liquids is essential for ensuring the required levels of machine accuracy and speed.
Process coolingHigh-quality material processing, such as laser cutting, necessitates high levels of temperature precision with simultaneous cooling of the peripheral technology.
Standard RiNano coatingRecooling systems, mini-wall-mounted and Power Fluid coolers: with RiNano coating as standard. The heat exchanger membranes ultra-thin, glass-like seals prevent dirt from settling on the condenser.
Benefits at a glance● Cooling output from 1 to 500 kW● A single system for enclosure cooling,
process and machine cooling, and the cooling of liquid media.
● Integration into bayed enclosure suites● Individual project management● Commissioning and servicing● Comprehensive pipeline calculation● Global service network
ImportantCooling output calculated at 32°C ambient temperature and an inlet temperature of 10°C and 18°C (water) or 20°C (oil)
Tips and tricksApplications see page 226
Selection criteria see page 227
Assembly see page 228
Notes see page 229
117
Rec
oolin
g sy
stem
s fo
r w
ater
Recooling systemsMini, cooling output 1/1.5 kW
for water
430
600
400
Technic
al design: ● Compact, modular structureof the cooling components on a base plate designed as a collecting tray.
● With RiNano coating. ● Pump to convey the medium. ● Precise temperature control,
based on microprocessor technology.
● Collective fault signal with floating contact.
● Application-specific special equipment available on request.
● Pressure-sealed system (.600) or open system with tank (.610).
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Approvals, see page 287.
Layout diagram, see page 258.
Characteristic curves of pump, see page 258.
Other options, see page 256.
Model No. SK 3318.600 3318.610 3319.600 3319.610
Rated operating voltage V/Hz 230, 50/60
Dimensions in mmWHD
600 400 430
Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
0.8 kW/0.9 kW 1.0 kW/1.1 kW
1.2 kW/1.3 kW 1.5 kW/1.7 kW
Power consumption 0.63 kW/0.78 kW 0.85 kW/1.05 kWRated current max. 4.2 A 5.4 ARefrigerant R134aNo. of cooling circuits 1
Temperature range Environment +15°C to +43°CLiquid media +10°C to +25°C
Pump capacity See characteristic curveTank Pressure-sealed Made from PP plastic Pressure-sealed Made from PP plasticTank capacity – 2.5 l – 2.5 lWater connections 1/2˝ internal threadWeight 48 kg 51 kgColour RAL 7035Protection category (electrics) IP 44Air throughput of fans 900 m3/hTemperature control Microcontroller control (factory setting +18°C) Accessories Packs of PageMetal filters 1 3286.510 190
Special voltages and technical modifications available on request. We reserve the right to make technical modifications.
118 Rittal System Climate Control
Air/water heat exchangers From page 102 Overflow valve Page 194 Cooling medium Page 194
Mini, cooling output 3/4.5 kW
Recooling systems for water
645
602
676
25
Technical de● Compact,
tion of the nents with
olin
g sy
stem
s fo
r w
ater
sign: modular configura-cooling compo-integral water tank.
● With RiNano coating. ● Integral tank level display.● Pump to convey the medium.● Precise temperature control,
based on microprocessor technology.
● Collective fault signal with floating contact.
● Application-specific special equipment available on request.
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Approvals, see page 287.
Layout diagram, see page 258.
Characteristic curves of pump, see page 258.
Other options, see page 256.
Rec
o
Model No. SK 3320.600 3334.600
Rated operating voltage V/Hz 400, 3~, 50/60/460, 3~, 601)
Dimensions in mmWHD
602 676 645
Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
2.7 kW/3.0 kW 3.0 kW/3.4 kW
3.9 kW/4.7 kW 4.5 kW/5.4 kW
Power consumption 1.72 kW/1.95 kW 2.00 kW/2.51 kWRated current max. 3.8 A/4.6 A/3.9 A 4.9 A/5.9 A/5.0 ARefrigerant R134aNo. of cooling circuits 1
Temperature range Environment +15°C to +43°CLiquid media +10°C to +25°C
Pump capacity See characteristic curveTank Plastic Tank capacity 30 lWater connections 1/2˝ internal threadWeight (empty) 88 kg 94 kgColour RAL 7035Protection category (electrics) IP 44Air throughput of fans 1785 m3/hTemperature control Microcontroller control (factory setting +18°C)Accessories Packs of PageMetal filters 1 3286.520 190
1) Supports multiple voltages without rewiring. Special voltages and technical modifications available on request. We reserve the right to make technical modifications.
119Rittal System Climate Control
Air/water heat exchangers From page 102 Overflow valve Page 194 Cooling medium Page 194
Recooling systeMini, cooling output 6 kW
Rec
oolin
g sy
stem
s fo
r w
ater
ms for water
645
602
1050
25
Technical design● Compact, mod
: ular configura-
tion of the cooling compo-nents with integral water tank.
● With RiNano coating. ● Integral tank level display.● Pump to convey the medium.● Precise cooling control based
on microprocessor technol-ogy.
● Collective fault signal with floating contact.
● Application-specific special equipment available on request.
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Approvals, see page 288.
Layout diagram, see page 258.
Characteristic curves of pump, see page 258.
Other options, see page 256.
Model No. SK 3334.660
Rated operating voltage V/Hz 400, 3~, 50/60/460, 3~, 601)
Dimensions in mmWHD
602 1050 645
Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
4.8 kW/5.2 kW/5.2 kW 6.0 kW/6.6 kW/6.6 kW
Power consumption 4.3 kW/5.1 kW/5.1 kWRated current max. 8 A/9.7 A/8 ARefrigerant R134aNo. of cooling circuits 1
Temperature range Environment +15°C to +43°CLiquid media +10°C to +25°C
Pump capacity See characteristic curveTank Made from PP plastic Tank capacity 30 lWater connections 3/4˝ internal threadWeight 125 kgColour RAL 7035Protection category (electrics) IP 44Air throughput of fans 2200/2500 m3/hTemperature control Microcontroller control (factory setting +18°C)Accessories Packs of PageMetal filters 1 3286.520 190
1) Supports multiple voltages without rewiring. Special voltages and technical modifications available on request. We reserve the right to make technical modifications.
120 Rittal System Climate Control
Air/water heat exchangers From page 102 Overflow valve Page 194 Cooling medium Page 194 Twin castors Catalogue 32, page 907
Power Fluid Cooler, cooling output 7.5 kW
Recooling systems for water
Fast delivery range
H
TB
B = WidthT = Depth
Technical design● Enclosure in a
ling
syst
ems
for
wat
er
: modern indus-
trial design. ● Compact, modular layout of
the refrigeration components. ● With RiNano coating. ● Collective fault signal with
floating contact. ● Space-saving, compact
design.
Options: 1. Flow monitor 2. Flow monitor
+ pump (4 bar stainless steel) 3. Automatic bypass valve 4. Automatic bypass valve
+ pump (4 bar stainless steel) 5. Hot gas bypass6. Flow monitor
+ pump (4 bar stainless steel) + hot gas bypass
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Approvals, see page 288.
Layout diagram, see page 258.
Characteristic curves of pump, see page 258.
Rec
oo
Model No. SK 3234.090
Rated operating voltage V/Hz 400, 3~, 50
Dimensions in mmWHD
595 1305 800
Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
5.2 kW 7.5 kW
Power consumption 3.8 kWRated current max. 7 ARefrigerant R134aNo. of cooling circuits 1
Temperature range Environment +15°C to +43°CLiquid media +10°C to +25°C
Pump capacity See characteristic curveTank Plastic Tank capacity 57 lWater connections 1˝ internal threadWeight (empty) 147 kgColour RAL 7035Protection category (electrics) IP 44Air throughput of fans 3140 m3/hTemperature control Microcontroller control (factory setting +18°C) Accessories Packs ofMetal filters 1 on request
We reserve the right to make technical modifications.
121Rittal System Climate Control
Air/water heat exchangers From page 102 Overflow valve Page 194 Cooling medium Page 194
RecooPower Fl
Rec
oolin
g sy
stem
s fo
r w
ater
ling systems for wateruid Cooler, cooling output 10 to 59 kW
Fast delivery range
H
TB
B = WidthT = Depth
Technical de
sign: ● Enclosure in a modern indus-trial design. ● Compact, modular layout of
the refrigeration components. ● With RiNano coating. ● Collective fault signal with
floating contact. ● Space-saving, compact
design.
Options for SK 3234.100/.110/.120/.130/.140/.1501. Flow monitor 2. Flow monitor
+ pump (4 bar stainless steel) 3. Automatic bypass valve 4. Automatic bypass valve
+ pump (4 bar stainless steel) 5. Hot gas bypass6. Flow monitor
+ pump (4 bar stainless steel) + hot gas bypass
Options for SK 3234.160/.170/.180/.190 1. Automatic bypass valve
+ pump (4 bar stainless steel) 2. Pressure-sealed tank
+ pump (4 bar stainless steel) + automatic bypass valve
3. Pressure-sealed tank
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Approvals, see page 288.
Layout diagram, see page 258.
Characteristic curves of pump, see page 258.
Model No. SK 3234.100 3234.110 3234.120 3234.130 3234.140 3234.150 3234.160 3234.170 3234.180 3234.190
Rated operating voltage V, Hz 400, 3~, 50
Dimensions in mmWHD
655 1280 1160
755 1280 1360
85515001560
104017002000
Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
7 kW 10 kW
10 kW 14 kW
11 kW 16 kW
13 kW 19 kW
15 kW 21 kW
18 kW 25 kW
23 kW 32 kW
25 kW 36 kW
33 kW 47 kW
41 kW 59 kW
Power consumption 3.8 kW 4.8 kW 5.3 kW 6.4 kW 7.1 kW 8.1 kW 15.9 kW 17.6 kW 15.0 kW 21.0 kWRated current max. 10.6 A 13.1 A 14.1 A 16.2 A 18.2 A 19.7 A 24.4 A 26.9 A 28.0 A 36.0 ARefrigerant R407CNo. of cooling circuits 1
Temperature range Environment +15°C to +43°CLiquid media +10°C to +25°C
Pump capacity See characteristic curveTank Plastic Stainless steelTank capacity 60 l 100 l 150 l 220 lWater connections 1˝ internal thread 11/4˝ internal thread 11/2˝ internal threadWeight (empty) 215 kg 225 kg 235 kg 240 kg 250 kg 260 kg 280 kg 300 kg 460 kg 490 kgColour RAL 7035Protection category (electrics) IP 54Air throughput of fans 6280 m3/h 10880 m3/h 18000 m3/h 32000 m3/hTemperature control Microcontroller control (factory setting +18°C) Accessories Packs ofMetal filters 1 on request
We reserve the right to make technical modifications.
122 Rittal System Climate Control
Air/water heat exchangers From page 102 Overflow valve Page 194 Cooling medium Page 194
In floor-standing enclosure, cooling output 2.1 to 7.7 kW
Recooling systems for water
T
H
B
B = WidthT = Depth
Te
ng s
yste
ms
for
wat
er
chnical design: ● Robust industrial standard in
3 enclosure sizes.● Identical basic enclosure
for oil and water recooling systems.
● Spare space for the integra-tion of special equipment
● Variable air routing is possi-ble via the l/h or r/h side panel
● Floating contact for collective fault signal.
● Level monitor/float-actuated switch.
● Multi-coil vaporiser in the tank.
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Note:The illustration shows units with customer-specific options.
Accessories:
Metal filter mats, castors and bypass valve available on request.
Approvals, see page 288.
Layout diagram, see page 260.
Characteristic curves of pump, see page 260.
Options, see page 256.
Rec
ooli
Model No. SK 3336.100 3336.200 3336.300 3336.500 3336.600 3336.650
Rated operating voltage V/Hz 400, 3~, 50
Dimensions in mmWHD
470 725 540
485 965 650
595 1180 800
Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
1.7 kW 2.1 kW
2.1 kW 2.6 kW
2.3 kW 3.4 kW
3.6 kW 5.0 kW
4.8 kW 6.2 kW
5.2 kW 7.7 kW
Power consumption 1.5 kW 1.7 kW 2.3 kW 2.9 kW 3.7 kW 3.9 kWRated current max. 3.4 A 3.0 A 4.2 A 5.5 A 6.2 A 7.3 ARefrigerant R134aNo. of cooling circuits 1
Temperature range Environment +15°C to +43°CLiquid media +10°C to +25°C
Pump capacity See characteristic curveTank Made from stainless steel 1.4301 (AISI 304)Tank capacity 17 l 33 l 57 lWater connections 3/4˝ internal thread 1˝ internal threadWeight 75 kg 97 kg 99 kg 141 kg 143 kg 147 kgColour RAL 7035Protection category (electrics) IP 54Air throughput of fans 700 m3/h 1250 m3/h 1785 m3/h 3140 m3/hTemperature control Electronic control with digital display (factory setting +18°C)
Delivery times available on request. Special voltages, other frequencies, and technical modifications available on request. We reserve the right to make technical modifications.
123Rittal System Climate Control
Air/water heat exchangers From page 102 Overflow valve Page 194 Cooling medium Page 194
Recooling sIn floor-standing e
Rec
oolin
g sy
stem
s fo
r w
ater
ystems for waternclosure, cooling output 10 to 36 kW
T
H
B
B = WidthT = Depth
Te
chnical design: ● Robust industrial housing in2 enclosure sizes.● Identical basic enclosure
for oil and water recooling systems.
● Integration of application-specific special equipment on request.
● Variable air routing is possi-ble via the l/h or r/h side panel.
● Optimum accessibility for servicing purposes by remov-ing the side panel.
● Floating contact for collective fault signal.
● Flow monitor.
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Note:The illustration shows units with customer-specific options.
Accessories:
Metal filter mats, castors, eyebolts and bypass valve available on request.
Approvals, see page 288.
Layout diagram, see page 260.
Characteristic curves of pump, see page 260.
Options, see page 256.
Model No. SK 3336.700 3336.710 3336.720 3336.730 3336.740 3336.750 3339.100 3339.200
Rated operating voltage V, Hz 400, 3~, 50/460, 3~, 60
Dimensions in mmWHD
615 1178 1160
715 1178 1360
81514001560
Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
8.3/10.4 kW10.0/12.6 kW
11.9/15.514.4/18.7
13.5/16.616.3/20.1
15.0/18.118.5/22.4
17.0/20.720.9/25.4
20.6/26.425.2/32.3
26.2/31.432.0/38.4
29.6/35.536.2/43.5
Power consumption 3.8 kW 4.8 kW 5.3 kW 6.4 kW 7.1 kW 13.1 kW 18.3 kW 18.6 kWRated current max. 10.6 A 13.1 A 14.1 A 16.2 A 18.2 A 23.7 A 29.2 A 30.7 ARefrigerant R407CNo. of cooling circuits 1
Temperature range Environment +15°C to +43°C1) Liquid media +10°C to +25°C
Pump capacity See characteristic curveTank Made from stainless steel 1.4301 (AISI 304)Tank capacity 60 l 100 l 150 lWater connections 1˝ internal thread 11/4˝ internal threadWeight 215 kg 225 kg 235 kg 240 kg 250 kg 260 kg 260 kg 300 kgColour RAL 7035Protection category (electrics) IP 54 IP 54Air throughput of fans 6280 m3/h 10880 m3/h 16000 m3/hTemperature control Electronic control with digital display (factory setting +18°C)
1) SK 3336.720 and SK 3336.750 +15°C to +40°C.Delivery times available on request. Special voltages and technical modifications available on request. We reserve the right to make technical modifications.
124 Rittal System Climate Control
Air/water heat exchangers From page 102 Overflow valve Page 194 Cooling medium Page 194
Power Fluid Cooler, cooling output 68 to 209 kW
Recooling systems for water
T
H
B
B = WidthT = Depth
Te
oolin
g sy
stem
s fo
r w
ater
chnical design: ● Compact design with control
components in the front and air intake via both side pan-els, air outlet upwards.
● Open system. ● Digital thermostat for tempera-
ture control with setpoint and actual value display.
● Flow monitor.
Options: 1. Automatic bypass valve
+ pump (4 bar stainless steel) 2. Pressure-sealed tank
+ pump (4 bar stainless steel) + automatic bypass valve
3. Pressure-sealed tank
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Approvals, see page 289.
Layout diagram, see page 258.
Characteristic curves of pump, see page 258.
Rec
Model No. SK 3234.200 3234.210 3234.220 3234.230 3234.240 3234.250 3234.260 3234.270 3234.280Rated operating voltage V, Hz 400, 3~, 50
Dimensions in mmWHD
1100 1606 2450
1100 1606 2450
1100 1606 2450
1100 1606 2950
1100 1875 2950
1100 1875 2950
110018752950
1100 1875 2950
110018753950
Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
48 kW 68 kW
55 kW 79 kW
63 kW 90 kW
71 kW 101 kW
87 kW 124 kW
95 kW 135 kW
111 kW 158 kW
123 kW 175 kW
146 kW 209 kW
Power consumption 20.5 kW 24.0 kW 27.0 kW 28.0 kW 38.5 kW 41.2 kW 50.0 kW 55.8 kW 66.0 kWRated current max. 40.0 A 46.0 A 50.0 A 77.0 A 66.5 A 71.9 A 88.4 A 99.7 A 112.3 ARefrigerant R410ANo. of cooling circuits 2
Temperature range Environment –20°C to +43°C Liquid media +10°C to +25°C
Pump capacity See characteristic curveTank Made from stainless steel 1.4301 (AISI 304) Tank capacity 300 l 500 l Water connections 21/2˝ internal threadWeight (empty) 790 kg 820 kg 835 kg 920 kg 1115 kg 1140 kg 1215 kg 1305 kg 1485 kgColour RAL 9002 Protection category (electrics) IP 54Air throughput of fans 13720 m3/h 20450 m3/h 27300 m3/h 35500 m3/h 60900 m3/hTemperature control Microcontroller control
We reserve the right to make technical modifications.
125Rittal System Climate Control
Air/water heat exchangers From page 102 Cooling medium Page 194
Rec
oolin
g sy
stem
s fo
r w
ater
Recooling systems for waterPower Fluid Cooler, cooling output 271 to 502 kW
T
H
B
B = WidthT = Depth
Te
chnical design: ● Compact design with controlcomponents in the front and air intake via both side pan-els, air outlet upwards.
● Pressure-sealed system. ● Digital thermostat for tempera-
ture control with setpoint and actual value display.
● Flow monitor.
Options: Automatic bypass valve + pump (4 bar stainless steel)
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Approvals, see page 289.
Layout diagram, see page 258.
Characteristic curves of pump, see page 258.
Model No. SK 3234.290 3234.300 3234.310 3234.320 3234.330 3234.340
Rated operating voltage V, Hz 400, 3~, 50
Dimensions in mmWHD
2200 2450 3400
2200 2450 4250
Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
190 kW 271 kW
214 kW 305 kW
237 kW 339 kW
284 kW 406 kW
316 kW 452 kW
351 kW 502 kW
Power consumption 80 kW 88 kW 96 kW 120 kW 132 kW 144 kWRated current max. 200 A 219 A 237 A 300 A 328 A 355 ARefrigerant R410ANo. of cooling circuits 2
Temperature range Environment –20°C to +43°C Liquid media +10°C to +25°C
Pump capacity See characteristic curveTank Steel Tank capacity 700 l Water connections 3˝ internal thread 4˝ internal thread Weight (empty) 2650 kg 2740 kg 2780 kg 3400 kg 3500 kg 3600 kgColour RAL 9002 Protection category (electrics) IP 54Air throughput of fans 83000 m3/h 78000 m3/h 76000 m3/h 112000 m3/h 111500 m3/h 111000 m3/hTemperature control Microcontroller control
We reserve the right to make technical modifications.
126 Rittal System Climate Control
Air/water heat exchangers From page 102 Cooling medium Page 194
Rittal System
In TS 8 Top enclosure system, cooling output 6/7.5 W
Recooling systems for water
TB
H10
0
B = WidthT = Depth
Te
ling
syst
ems
for
wat
er
chnical design: ● Compact structure with con-
trol components in the front and air intake via the rear.
● Suitable for bayed siting.● Special fittings and options
available on request.● Float-actuated switch as pro-
tection against running dry.● Floating collective fault signal.● Equipped with Grundfos
pumps and Siemens compo-nents.
● Service accessibility from all sides.
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Note:The illustration shows units with customer-specific options.
Accessories:
Metal filter mat and bypass valve available on request.
Approvals, see page 289.
Detailed drawing,see page 263.
Layout diagram, see page 263.
Characteristic curves of pump, see page 263.
Options, see page 256.
Rec
oo
Model No. SK 3335.060 3335.075
Rated operating voltage V/Hz 400, 3~, 50
Dimensions in mmWHD
600 2150 600
Base/plinth height mm 100Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
4.8 kW 6.0 kW
6.0 kW 7.5 kW
Power consumption 2.4 kW 2.5 kWRated current max. 8.0 A 8.5 ARefrigerant R407CNo. of cooling circuits 1
Temperature range Environment +10°C to +43°CLiquid media +10°C to +30°C
Pump capacity See characteristic curveTank Made from PP plasticTank capacity 105 lWater connections 3/4˝ external thread Weight 180 kg 190 kgColour RAL 7035Protection category (electrics) IP 54Air throughput of fans 4000 m3/h
Temperature control Electronic control with digital display, setting range +10°C to +30°C (factory setting +18°C)
Delivery times available on request. Special voltages, other frequencies and refrigerants, and technical modifications available on request. We reserve the right to make technical modifications.
Air/water heat exchangers From page 102 TS 8 lock systems Cat. 32, from page 947 TS 8 baying system Cat. 32, from page 138Overflow valve page 194 Cooling medium page 194
127 Climate Control
RecooIn TS 8 T
128
Rec
oolin
g sy
stem
s fo
r w
ater
ling systems for waterop enclosure system, cooling output 10/25 W
T
H10
0
BT
B
H10
0
B = WidthT = Depth
Te
chnical design: ● Compact design with controlcomponents in the front and air intake via the rear.
● Suitable for bayed siting.● Special fittings and options
available on request.● Float-actuated switch as pro-
tection against running dry.● Floating collective fault signal.● Magnetic valve in the cooling
circuit.● Equipped with Grundfos
pumps and Siemens compo-nents.
● Service accessibility from all sides.
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Note:The illustration shows units with customer-specific options.
Accessories:
Metal filter mat and bypass valve available on request.
Approvals, see page 289.
Layout diagram, see page 263.
Characteristic curves of pump, see page 263.
Options, see page 256.
Model No. SK 3335.100 3335.120 3335.150 3335.200 3335.250
Rated operating voltage V/Hz 400, 3~, 50
Dimensions in mmWHD
800 2150 600
1200 2150 600
Base/plinth height mm 100 Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
8.0 kW 10.0 kW
10.0 kW 12.0 kW
11.5 kW 15.0 kW
17.0 kW 20.0 kW
22.0 kW 25.0 kW
Power consumption 4.0 kW 4.8 kW 5.8 kW 8.0 kW 9.0 kWRated current max. 12.0 A 14.0 A 17.0 A 20.0 A 22.0 ARefrigerant R407CNo. of cooling circuits 1
Temperature range Environment +15°C to +43°CLiquid media +10°C to +25°C
Pump capacity See characteristic curveTank Made from PP plasticTank capacity 120 l 240 lWater connections 3/4˝ external thread 1˝ external threadWeight 250 kg 270 kg 380 kg 530 kg 560 kgColour RAL 7035Protection category (electrics) IP 54Air throughput of fans 6000 m3/h 8000 m3/hTemperature control Electronic control with digital display (factory setting +18°C)
Delivery times available on request. Special voltages, other frequencies, and technical modifications available on request. We reserve the right to make technical modifications.
Air/water heat exchangers From page 102 TS 8 lock systems Cat. 32, from page 947 TS 8 baying system Cat. 32, from page 138Overflow valve page 194 Cooling medium page 194
Rittal System Climate Control
Mini, for wall mounting, cooling output 1/2.5/4 kW
Recooling systems for water
T
H
BT
H
B
B = WidthT = Depth
Technical d● Compact
tion of the
olin
g sy
stem
s fo
r w
ater
esign: , modular configura- cooling compo-
nents with integral water tank. ● With RiNano coating ● Application-specific special
equipment available on request.
● Open system with tank.
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Approvals, see page 289.
Layout diagram, see page 264.
Characteristic curves of pump, see page 264.
Other options, see page 256.
Rec
o
Model No. SK 3360.100 3360.250 3360.470
Rated operating voltage V/Hz 400, 3~, 50/60/460, 3~, 601)
Dimensions in mmWHD
400 950 310
400 1580 290
500 1580 390
Cooling output at Tw = 10°C/Tu = 32°C Tw = 18°C/Tu = 32°C
0.8 W/0.9 kW1.0 kW/1.1 kW
2.1 kW/2.3 kW 2.5 kW/2.8 kW
3.3 kW/3.7 kW 4.0 kW/4.5 kW
Power consumption 0.7 kW/0.76 kW 1.55 kW/2.0 kW 1.85 kW/2.74 kWRated current max. 2.7 A/3.0 A 3.7 A/3.8 A 4.6 A/5.2 ARefrigerant R134aNo. of cooling circuits 1
Temperature rangeEnvironment +15°C to +43°CLiquid media +10°C to +25°C
Pump capacity See characteristic curveTank Plastic Tank capacity 5 l 10 l 15 lWater connections Quick-release coupling (counterpart included in accessory bag) 3/4˝ internal threadWeight 47 kg 78 kg 103 kgColour RAL 7035Protection category (electrics) IP 44Air throughput of fans 500 m3/h 710 m3/h 2000 m3/hTemperature control Microcontroller control (factory setting +18°C)
Accessories Packs of Page
Filter mat 1 3286.400 189 Metal filter mat 1 3286.410 190
1) Supports multiple voltages without rewiring. Special voltages and technical modifications available on request. We reserve the right to make technical modifications.
129Rittal System Climate Control
Air/water heat exchangers From page 102 Overflow valve Page 194 Cooling medium Page 194
Rec
oolin
g sy
stem
s fo
r oi
l
Recooling sIn floor-standing e
ystems for oilnclosure, cooling output 2.5 to 8 kW
T
H
B
B = WidthT = Depth
Te
chnical design: ● Robust industrial standard in2 enclosure sizes.● Identical basic enclosure
for oil and water recooling systems.
● Variable air routing is possi-ble via the l/h or r/h side panel
● High-capacity gear pump.● Floating contact for collective
fault signal.● Integration of application-spe-
cific special equipment on request.
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Note:The illustration shows units with customer-specific options.
Accessories:
Metal filter mats and castors available on request.
Approvals, see page 290.
Layout diagram, see page 265.
Options, see page 256.
Model No. SK 3337.200 3337.300 3337.500 3337.600 3337.650
Rated operating voltage V/Hz 400, 3~, 50
Dimensions in mmWHD
485 965 650
595 1180 800
Cooling output with oil ISO VG 32 Toil = 20°CTu = 32°C
2.5 kW 3.4 kW 5.2 kW 6.7 kW 8.0 kW
Power consumption 1.4 kW 1.9 kW 3.0 kW 3.9 kW 4.9 kWRated current max. 3.1 A 3.5 A 5.0 A 7.0 A 7.8 ARefrigerant R134aNo. of cooling circuits 1
Temperature range Environment +15°C to +43°CLiquid media +15°C to +25°C
Pump capacity at 10 bar 10 l /min 24 l /minOptional tank Made from stainless steel 1.4301 (AISI 304) Optional tank capacity 33 l 57 lConnections 3/4˝ internal thread 1˝ internal threadWeight 103 kg 105 kg 148 kg 150 kg 154 kgColour RAL 7035Protection category (electrics) IP 54Air throughput of fans 1250 m3/h 1785 m3/h 3140 m3/hTemperature control Electronic control with digital display (factory setting +20°C)
Delivery times available on request. Special voltages, other frequencies, and technical modifications available on request. We reserve the right to make technical modifications.
130 Rittal System Climate Control
^goLayout diagram Page 265
In floor-standing enclosure, cooling output 11 to 26 kW
Recooling systems for oil
T
H
B
B = WidthT = Depth
Te
cool
ing
syst
ems
for
oil
chnical design: ● Robust industrial housing in
2 enclosure sizes.● Identical basic enclosure
for oil and water recooling systems.
● Variable air routing is possi-ble via the l/h or r/h side panel.
● Optimum accessibility for servicing purposes by remov-ing the side panel.
● High-capacity gear pump.● Floating contact for collective
fault signal.● Integration of application-
specific special equipment on request.
Supply includes:Recooling system wired ready for connection, with multilingual documentation including func-tional diagram and wiring plans.
Note:The illustration shows units with customer-specific options.
Accessories:
Metal filter mats and castors available on request.
Approvals, see page 290.
Layout diagram, see page 265.
Options, see page 256.
Re
Model No. SK 3337.700 3337.710 3337.720 3337.730 3337.740 3337.750
Rated operating voltage V/Hz 400, 3~, 50/460, 3~, 60
Dimensions in mmWHD
615 1178 1160
715 1178 1360
Cooling output with oil ISO VG 32 Toil = 20°CTu = 32°C
11 kW 15.5 kW 17.2 kW 19.0 kW 22.0 kW 26.0 kW
Power consumption 5.3 kW 6.4 kW 7.1 kW 8.7 kW 9.6 kW 10.5 kWRated current max. 12.0 A 15.0 A 16.0 A 19.0 A 21.0 A 22.0 ARefrigerant R407CNo. of cooling circuits 1
Temperature range Environment +15°C to +43°C1) Liquid media +15°C to +25°C
Pump capacity at 10 bar 45 l /min 68 l /minOptional tank Made from stainless steel 1.4301 (AISI 304)Optional tank capacity 60 l 100 lConnections 1˝ internal threadWeight 222 kg 232 kg 242 kg 248 kg 258 kg 268 kgColour RAL 7035Protection category (electrics) IP 54Air throughput of fans 6280 m3/h 10880 m3/hTemperature control Electronic control with digital display (factory setting +20°C)
1) SK 3337.720 and SK 3337.750 +15°C to +40°C.Delivery times available on request. Special voltages, other refrigerants, and technical modifications available on request. We reserve the right to make technical modifications.
131Rittal System Climate Control
Layout diagram Page 265
Imm
ersi
ble
reco
olin
g sy
stem
s fo
r oi
l/em
ulsi
on
Immersible recoolinCooling output 2.4 to 5.6 kW
g systems for oil/emulsion
T1 B1
H2
B2 T2
H1
B = WidthT = Depth
Ap
plication: Ideal for cooling contaminated cooling lubricants, such as drill-ing, cutting and grinding oils in machine tools. The units are placed on top of the oil or emul-sion tank and immersed in the fluid.Technical design: ● For the cooling of oil/emulsion. ● Robust industrial standard. ● Flat evaporator coil insensi-
tive to dirt. ● Bi-frequency components
(50/60 Hz).
Supply includes:Immersible recooling system wired ready for connection, metal filter, eyebolts, with multilingual documentation, including functional diagram and wiring plans.
Approvals, see page 290.
Layout diagram, see page 265.
Options, see page 257.
Model No. SK for oil 3338.020 3338.040 3338.060 3338.080
Model No. SK for emulsion 3338.500 3338.520 3338.540 3338.560
Rated operating voltage V, Hz 400, 3~, 50/460, 3~, 60Cooling output at Toil/EM = 20°C/Tu = 32°C 2.4 kW/2.7 kW 3.2 kW/3.6 kW 4.6 kW/5.2 kW 5.6 kW/6.3 kW
Dimensions in mmB1H1T1
785 1650 785
Dimensions of immersible part, mm B2T2
719 719
Immersion depth mm H2 550Minimum media level with oil/emulsion mm 203/178 278/203
Power consumption Oil 1.6 kW/1.9 kW 1.8 kW/2.2 kW 2.4 kW/3.0 kW 2.6 kW/3.3 kWEmulsion 1.8 kW/2.1 kW 2.0 kW/2.5 kW 2.6 kW/3.2 kW 2.8 kW/3.6 kW
Rated current max. Oil 3.5 A/3.7 A 3.8 A/4.0 A 5.5 A/5.9 A 5.6 A/5.8 AEmulsion 3.8 A/4.0 A 4.1 A/4.3 A 5.9 A/6.3 A 6.0 A/6.3 A
Refrigerant R134aNumber of cooling circuits 1
Temperature range Environment +15°C to +42°CLiquid media +10°C to +25°C
Weight 133/130 kg 143/140 kg 158/155 kg 173/170 kgColour RAL 7035Protection category (electrics) IP 54Air throughput of fans 1500/1560 m3/h 2200/2350 m3/h
Temperature control Electronic controller with digital display; +10°C to +25°C adjustment range (factory setting +20°C)
Delivery times available on request. Special voltages available on request. Technical modifications reserved.
132 Rittal System Climate Control
Layout diagram Page 265
Immersible r
ecooling systems for oil/emulsionCooling output 8.5 to 17.3 kWT1 B1
H2
B2 T2
H1
B = WidthT = Depth
Ap
stem
s fo
r oi
l/em
ulsi
on
plication: Ideal for cooling contaminated cooling lubricants, such as drill-ing, cutting and grinding oils in machine tools. The units are placed on top of the oil or emul-sion tank and immersed in the fluid.
Technical design: ● For the cooling of oil/emulsion. ● Robust industrial standard. ● Flat evaporator coil insensi-
tive to dirt. ● Bi-frequency components
(50/60 Hz).
Supply includes:Immersible recooling system wired ready for connection, metal filter, eyebolts, with multilingual documentation, including functional diagram and wiring plans.
Approvals, see page 290.
Layout diagram, see page 265.
Options, see page 257.
Imm
ersi
ble
reco
olin
g sy
Model No. SK for oil 3338.100 3338.120 3338.140 3338.160 3338.180 3338.200Model No. SK for emulsion 3338.580 3338.600 3338.620 3338.640 3338.660 3338.680
Rated operating voltage V, Hz 400, 3~, 50/460, 3~, 60Cooling output at Toil/EM = 20°C/Tu = 32°C
8.5 kW/ 9.5 kW
10.5 kW/ 11.8 kW
12.0 kW/ 13.4 kW
13.6 kW/ 15.2 kW
15.3 kW/ 17.1 kW
17.3 kW/ 19.4 kW
Dimensions in mmB1H1T1
785 1650 785
Dimensions of immersible part, mm B2T2
719 719
Immersion depth mm H2 550Minimum media level with oil/emulsion mm 328/278 378/278 428/328
Power consumption Oil 4.6 kW/5.5 kW 5.0 kW/6.0 kW 5.6 kW/6.6 kW 6.1 kW/7.3 kW 6.7 kW/8.1 kW 7.5 kW/9.0 kWEmulsion 4.8 kW/5.7 kW 5.3 kW/6.3 kW 5.8 kW/6.8 kW 6.3 kW/7.6 kW 6.6 kW/8.5 kW 7.7 kW/9.3 kW
Rated current max. Oil 8.4 A/8.6 A 9.2 A/9.3 A 10.1 A/10.5 A 11.1 A/11.5 A 12.1 A/12.4 A 13.3 A/13.7 AEmulsion 8.5 A/9.0 A 9.6 A/9.9 A 10.6 A/11.2 A 11.5 A/12.0 A 12.5 A/13.2 A 13.7 A/14.1 A
Refrigerant R407CNumber of cooling circuits 1
Temperature range Environment +15°C to +42°CLiquid media +10°C to +25°C
Weight 183 kg 203 kg 228 kg 248 kg 253 kg 263 kgColour RAL 7035Protection category (electrics) IP 54Air throughput of fans 7200/7480 m3/h 7900/8480 m3/hTemperature control Electronic control with digital display (factory setting +20°C)
Delivery times available on request. Special voltages available on request. Technical modifications reserved.
133Rittal System Climate Control
Layout diagram Page 265
Immersible reCooling output 21 to
Imm
ersi
ble
reco
olin
g sy
stem
s fo
r oi
l/em
ulsi
on
cooling systems for oil/emulsion78 kW
T1
B1
H2
B2T2
H1
B = WidthT = Depth
Ap
plication: Ideal for cooling contaminated cooling lubricants, such as drill-ing, cutting and grinding oils in machine tools. The units are placed on top of the oil or emul-sion tank and immersed in the fluid.Technical design: ● For the cooling of oil/emulsion. ● Robust industrial standard in
2 enclosure sizes. ● Flat evaporator coil insensi-
tive to dirt. ● Bi-frequency components
(50/60 Hz).
Supply includes:Immersible recooling system wired ready for connection, metal filter, eyebolts, with multilingual documentation, including functional diagram and wiring plans.
Approvals, see page 290/291.
Layout diagram, see page 265.
Options, see page 257.
Model No. SK for oil 3338.220 3338.240 3338.260 3338.280 3338.300 3338.320 3338.340 3338.360
Model No. SK for emulsion 3338.700 3338.720 3338.740 3338.760 3338.780 3338.800 3338.820 3338.840
Rated operating voltage V, Hz 400, 3~, 50/460, 3~, 60Cooling output at Toil/EM = 20°C/Tu = 32°C
21.0 kW/ 23.0 kW
31.0 kW/ 35.0 kW
35.0 kW/ 39.0 kW
46.0 kW/ 50.0 kW
49.0 kW/ 54.0 kW
61.0 kW/ 69.0 kW
73.0 kW/ 81.0 kW
78.0 kW/ 87.0 kW
Dimensions in mmB1H1T1
785 1650 1830
1830 1650 1830
Dimensions of immersible part, mm B2T2
719 1764
1764 1764
Immersion depth mm H2 550Minimum media level with oil/emulsion mm 378/278 428/328 378/278 428/278 428/328 428/378
Power consumption Oil 9.7 kW/
9.9 kW13.0 kW/ 16.2 kW
14.6 kW/ 18.2 kW
18.8 kW/ 22.6 kW
20.0 kW/ 24.1 kW
23.6 kW/ 28.5 kW
27.3 kW/ 32.9 kW
29.0 kW/ 34.9 kW
Emulsion 10.1 kW/12.6 kW
13.4 kW/16.7 kW
14.0 kW/18.7 kW
19.5 kW/23.5 kW
20.8 kW/25.0 kW
24.4 kW/29.5 kW
28.0 kW/33.9 kW
29.8 kW/35.9 kW
Rated current max. Oil 17.3 A/
17.8 A21.6 A/ 23.0 A
24.3 A/ 25.5 A
35.5 A/ 35.2 A
35.4 A/ 35.8 A
42.7 A/ 42.9 A
50.0 A/ 50.0 A
53.0 A/ 53.0 A
Emulsion 17.9 A/ 18.4 A
22.2 A/ 23.6 A
24.9 A/ 26.1 A
36.7 A/ 36.5 A
36.6 A/ 37.0 A
43.9 A/ 44.1 A
50.2 A/ 51.1 A
54.2 A/ 54.2 A
Refrigerant R407CNumber of cooling circuits 1
Temperature range Environment +15°C to +45°CLiquid media +10°C to +25°C
Weight 305 kg 380 kg 425 kg 435 kg 455 kgColour RAL 7035Protection category (electrics) IP 54Air throughput of fans 15000/15600 m3/h 30000/31200 m3/hTemperature control Electronic control with digital display (factory setting +20°C)
Delivery times available on request. Special voltages available on request. Technical modifications reserved.
134 Rittal System Climate Control
Layout diagram Page 265
Liquid cooling IT
CRAC systems from page 136
� � � � � � CRAC systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 – 118 kW. . . . . . . 138
Water-cooled
Refrigerant-cooled
With heater
Without heater
With humidifier
With heater and humidifier
Rittal System Clima
Aisle containment page 136
Aisle containment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
g IT
+–
Liquid Cooling Package from page 136
� � � � LCP Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . up to 20 kW. . . . . . . 141� � LCP Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . up to 40 kW. . . . . . . 142� � LCP Extend. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 kW. . . . . . . 143
� � � � LCP Smart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . up to 20 kW. . . . . . . 144� � LCP Inline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . up to 30 kW. . . . . . . 145
+–
Liq
uid
co
olin
Scalable output
Standardised installation
Suitable for retrofitting
Low density
Mid density
High density
Chillers for IT cooling from page 146
� Chillers for IT cooling . . . . . . . . . . . . . . . . . . . . . . 15 to 123 kW. . . . . . . 148� Chillers for IT cooling . . . . . . . . . . . . . . . . . . . . . 145 to 462 kW. . . . . . . 149
W Ö E
Medium to be cooled: Water
Medium to be cooled: Oil
Medium to be cooled: Emulsion
W Ö E
Water/water heat exchangers from page 150
� Water/water heat exchangers . . . . . . . . . . . . . . . 25 to 250 kW. . . . . . . 153
E
Water-carrying parts
stainless steel (optional)EPiping systems page
� Piping systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
User-specific
135te Control
CR
AC
sys
tem
s, L
iqui
d C
oolin
g P
acka
ge
CRAC systems, Liquid Cooling Package
Modular climate control concepts – tailored to your
specific requirements! Rittal solves the problem of
climate control for high heat losses per rack with liquid
cooling components. Extremely high heat loads are
dissipated from the network enclosures and server
racks via air/water heat exchangers.
Additionally, this system allows data centres to be
extended in a temperature-neutral way.
136 Rittal System Climate Control
CRAC systemsPerfect solutions for cooling via a raised floor. Integral, scalable, and energy-efficient.
Rittal System Climate Control
AC
sys
tem
s, L
iqui
d C
oolin
g P
acka
ge
LCP Inline The LCP Inline is designed for siting within a bayed enclosure suite. The hot air is drawn in from the room or hot aisle at the rear of the device and expelled at the front into the cold aisle after cooling. The LCP Inline achieves maximum performance and efficiency in conjunction with Rittal aisle containment. With this product, a raised floor is not necessary.
LCP Smart/LCP Plus These units provide reliable climate control and precise server loads up to 30 kW.
CR
Benefits at a glance CRAC systems: ● An alternative to water and refrigerant● Energy-efficient EC fan system
LCP Plus: ● Complete unit with 30 kW useful cooling
output ● Touchscreen ● Basic CMC as standard
LCP Smart: ● Complete unit with 20 kW useful cooling
output ● Basic CMC as standard● Optional touchscreen
LCP Extend: ● Complete unit with 12 kW useful cooling
output● Independent unit; ideal for retrofitting to
racks while operational● Relieves the pressure on the room air-
conditioning system
LCP Inline: ● Complete unit with 30 kW useful cooling
output ● No raised-floor climate control is required
in the cold aisle
All LCPs come with networking capability as standard, thanks to the Basic CMC with integral graphic user interface.
Important● All enclosures are bayable with the corre-
sponding TS 8 racks.● To ensure proper use of LCP compo-
nents, the racks being cooled should be sealed against the ingress of ambient air wherever possible. For suitable accessories see page 187.
Tips and tricksApplications see page 140
Selection criteria see page 227
Assembly see page 228
137
CR
AC
sys
tem
s
CRAC systemsUseful cooling output 18 – 11
8 kWBT
H
B = WidthT = Depth
Ap
plication and mode of operation: The CRAC system draws warm waste air from the top of your data centre, cools it using either water or refrigerant in a closed heat exchanger, and blows the cooled, filtered supply air into the raised floor with overpres-sure.Benefits: ● The unit is available in a
broad output range, and for a variety of cooling media.
● The unit supports optimum integration of both hardware and software.
● Optimum energy and space efficiency thanks to intelligent design features, such as the slanted heat exchanger and base-integrated fan.
● Frame based on the popular TS 8 system.
Equipment: User-friendly, high-quality con-troller with an extensive range of functions and connectivity. Space-saving, readily accessi-ble, high-efficiency fan. Flow and energy-optimised special heat exchanger with a generous safety factor.
Colour:RAL 7035
Model No. SK Without heater 3301.620 3301.660 3301.830 3301.870 3300.510 3300.560 3300.710 3300.760
Model No. SK With heater 3301.630 3301.670 3301.840 3301.880 3300.520 3300.570 3300.720 3300.770
Model No. SK With humidifier 3301.640 3301.680 3301.850 3301.890 3300.530 3300.580 3300.730 3300.780
Model No. SK With heater and humidifier 3301.650 3301.690 3301.860 3301.990 3300.540 3300.590 3300.740 3300.790
Useful cooling output1) 23 kW 39 kW 78 kW 118 kW 18 kW 30 kW 43 kW 54 kW
Operating voltage V/Hz 400/50 400/50 400/50 400/50 400/50 400/50 400/50 400/50
Dimensions in mmWHD
1100 1950 650
1100 1950 850
1800 1950850
2600 1950 850
11001950850
11001950850
14001950850
18001950850
Cooling medium Water2) Refrigerant R407C2) Volumetric airflow at an external pressure loss of 20 Pa 6000 m3/h 11000 m3/h 22000 m3/h 33000 m3/h 6000 m3/h 8500 m3/h 12500 m3/h 16000 m3/h
No. of fans 1 1 2 3 1 1 1 2Power consumption of fans 0.6 kW 1.5 kW 3.0 kW 4.6 kW 0.6 kW 0.9 kW 1.8 kW 1.7 kWStart-up current of fans 1.8 A 4.6 A 9.2 A 13.8 A 1.8 A 4.6 A 4.6 A 9.2 AMax. speed 1150 rpm 1200 rpm 1200 rpm 1200 rpm 1150 rpm 1200 rpm 1200 rpm 1200 rpmNo. of compressors – 1 2 3 3Power consumption of compressors – 5 kW 8.8 kW 13.1 kW 15 kWStart-up current of compressors – 13.1 A 25.6 A 38.4 A 39.3 AType of connection Terminal strip –Weight 300 kg 360 kg 550 kg 770 kg 455 kg 505 kg 585 kg 935 kgNoise output 75 dB (A) 79 dB (A) 82 dB (A) 84 dB (A) 74 dB (A) 74 dB (A) 81 dB (A) 76 dB (A)Filter quality to DIN EN 779 G4 G4
1) Output figures less heat from the fans. CW: 26°C/45 % air inlet and 10°C/15°C water temperatures DX: 26°C/45 % air inlet and 50°C condensation temperature
2) Other media available on request. Other options available on request. We reserve the right to make technical modifications.
138 Rittal System Climate Control
Recooling systems From page 146
Aisle containment
1200
2000
600/800
Apop
Ais
le c
onta
inm
ent
plication and mode of eration:
Rittal aisle containment is a combination of door and roof components which facilitate consistent separation of the hot and cold air in the data centre. Such separation is elementary when it comes to saving energy and increasing the efficiency of the available climate control technology. It is the cold air that determines whether your equip-ment is at its best in the enclo-sures. With this in mind, Rittal has deliberately chosen to focus on this aspect, and to route cold air selectively to the equipment.
Benefits: ● Increased energy efficiency
and performance capability of climate control.
● Superior output density is facilitated, thanks to guaran-teed cold air supply.
● Easily installed and retrofit-ted, as it is fully compatible with the TS 8 enclosure system.
● An inexpensive way to boost the performance of your exist-ing plant, lengthening the investment cycle until a replacement needs to be pur-chased.
Equipment: Slimline door element with view-ing window. Stable roof components in a composite metal with a high level of light permeability. Where required, safety glass may also be used.
Note:Other size variants and individually modified systems available on request.
Model No. SK roof element 3300.170 3300.180 –
Model No. SK door element – – 3300.160
Width of element (identical to enclosure width), mm 600 800 –Width of cold aisle mm 1200 1200 1200Height of cold aisle mm – – 2000
139Rittal System Climate Control
LCP Extend From page 143
Liqu
id C
oolin
g P
acka
ge
Liquid Cooling PaApplications
140
ckage
Possible interfaces for
● Emergency water supply
● Free cooling
● Heat recovery
Water/water heat exchanger
IT chiller
Control Distribution
Efficient climate control concepts – tailored to your specific
requirements!
Rittal solves the problem of climate control for high heat
losses per rack with liquid cooling components. Extremely
high heat loads are dissipated from the enclosures, IT and
server racks via air/water heat exchangers. Additionally,
data centres may be extended in a temperature-neutral
manner, and cold aisles efficiently supplied with cold air.
LCP Standard
Bayable with TS 8 server racks As the height and depth are identical, it may be bayed either in the middle of an enclosure suite or at the end.
LCP Plus
Useful cooling output up to 40 kW Useful cooling outputs of 30 kW (rack height 2000 mm) or 40 kW (rack height 2400 mm) are achieved with 6 or 8 high-per-formance fans, which may be exchanged without the need for tools.
LCP Extend
Rittal System Climate Control
Installation while operationalAir/water heat exchanger (12 kW) to support climate control of the room.
LCP Smart
Maximum efficiency with EC fan technologyThe latest yardstick in the mid-range performance category. Highly efficient and compact.
LCP Inline
Targeted cooling of selected aislesWith a useful cooling output of up to 30 kW, aisles can be effi-ciently cooled in conjunction with aisle containment.
LCP Standard, useful cooling output up to 20 kW
Liquid Cooling Package
TB
H
B = WidthT = Depth
Ap
plication and mode of operation:Air/water heat exchanger, bayable with server racks based on TS 8 (H x D 2000 x 1000/1200 mm). The useful cooling output of max. 20 kW can be achieved by installing additional modules.Benefits: ● The separation of cooling and
rack prevents water from pen-etrating the server rack.
● Increased assembly- and service-friendliness
● LCPs are easy to handle (max. 2 m) and may be trans-ported in lifts and through doors.
● The low weight means a mini-mal area load.
Approvals, see page 293.
Liqu
id C
oolin
g P
acka
ge
Model No. SK 3301.2301) 3301.420
Description LCP StandardRated operating voltage V/Hz 230, 50/60
Dimensions in mm WHD
30020001000
30020001200
Usable U 42Useful cooling output Up to 20 kW
Rated current 3.8 A/4.4 APre-fuse 10 A/10 ACooling medium Water (for specifications see Internet) Water inlet temperature +6°C to +20°CPermissible operating pressure p. max. 5 barProtection category to EN 60 529 IP 30 Duty cycle 100 % Electrical connection Connection cableWater connection 3/4˝ external thread Weight max. 160 kgColour RAL 7035Air throughput of fans 3000 m3/h
Temperature control4-way fan controlElectro-magnetic valve
Accessories Packs of PageAdd-on cover for height compensation with 2200 mm high racks 1 3301.221 3301.421 188
Special voltages and sizes available on request. We reserve the right to make technical modifications. 1) Also available with 115 V, Model No. 3301.210.
Accessories Page 186 IT chillers From page 146 Server racks Cat. 32, from page 774
Cooling moduleThe cooling module allows the useful cooling output of the LCP Standard to be increased in 6.6 kW increments. Model No. see page 186.
141Rittal System Climate Control
Liquid Cooling PaLCP Plus, useful cooling ou
Liqu
id C
oolin
g P
acka
ge
ckagetput up to 40 kW
TB
H
B = WidthT = Depth
Ap
plication and mode of operation:Air/water heat exchanger, bayable with server racks based on TS 8 (H x D 2000 x 1200 mm). Complete unit with 40 kW useful cooling output.Benefits: ● The separation of cooling and
rack prevents water from pen-etrating the server rack.
● Increased assembly- and service-friendliness
● LCPs are easy to handle and may be transported in lifts and through doors.
● The low weight means a mini-mal area load.
Approvals, see page 293.
Model No. SK 3301.4801) on request
Description LCP Plus LCP Plus
Rated operating voltage V/Hz 230, 1~, 50/60 400, 3~, 50/60
230, 1~, 50/60 400, 3~, 50/60
Dimensions in mm WHD
30020001200
30024001200
Usable U 42 51Useful cooling output Up to 30 kW Up to 40 kW
Rated current 9.3 A/10.4 A
Technical specifications available on request.
Pre-fuse 16 A/16 A
Cooling medium Water (for specifications see Internet)
Water inlet temperature +6°C to +20°CPermissible operating pressure p. max. 5 barProtection category to EN 60 529 IP 30 Duty cycle 100 % Electrical connection Connection cableWater connection 1˝ external thread Weight 230 kgColour RAL 7035Air throughput of fans 5000 m3/h
Temperature control4-way fan controlTwo-way control valve
Accessories Packs of Page Add-on cover for height compensation with 2200 mm high racks 1 3301.421 188
Special voltages and sizes available on request. We reserve the right to make technical modifications. 1) Delivery times available on request.
142 Rittal System Climate Control
Accessories Page 186 IT chillers From page 146 Server racks Cat. 32, from page 774
LCP Extend, useful cooling output 12 kW
Liquid Cooling Package
H
BT
B = WidthT = Depth
Ap
plication and mode of operation:Air/water heat exchanger for retrofitting to racks while opera-tional.The stand-alone unit replaces the rear door (for other brands on request).
Benefits: ● Mounted on the rear of
the server rack; eases the pressure on the room air-conditioning system.
● Water connection either at the bottom or top.
Approvals, see page 294.
Liqu
id C
oolin
g P
acka
ge
Model No. SK 3301.4901)
Description LCP Extend
Rated operating voltage V/Hz 230, 1~, 50/60 400, 3~, 50/60
Dimensions in mm WHD
5201910160
Usable U 42Useful cooling output 12 kW
Rated current 2.4 A/3.0 APre-fuse 6 A/6 ACooling medium Water (for specifications see Internet) Water inlet temperature +15°CPermissible operating pressure p. max. 5 barProtection category to EN 60 529 IP 20Duty cycle 100 % Electrical connection Connection cableWater connection 3/4˝ external thread Weight 130 kgColour RAL 7035Air throughput of fans 3000 m3/h Temperature control Fan control
Special voltages and sizes available on request. We reserve the right to make technical modifications. 1) Delivery times available on request.
143Rittal System Climate Control
Accessories Page 186 IT chillers From page 146 Server racks Cat. 32, from page 774
LiquidLCP Smar
Liqu
id C
oolin
g P
acka
ge
Cooling Packaget, useful cooling output up to 20 kW
TB
H
B = WidthT = Depth
Apop
plication and mode of eration:
The LCP Smart draws in the air at the sides of the server enclo-sure rear, cools it using high-performance compact registers, and blasts the cooled air back into the front part of the server enclosure at the sides.
Maximum efficiency is achieved, thanks to the use of EC fans. The heat exchanger of the LCP Smart supports the longest possible usage of free cooling.
Benefits: ● High energy efficiency. ● Bayable with server/network
enclosures based on TS 8 (H 2000, D 1000).
● Fans may be individually exchanged with the system operational, self-contacting.
● Basic CMC as standard. ● Touchscreen display may be
retrofitted. ● Shorter servicing times.
● Extended functionality of the monitoring and control tech-nology/software.
● Optimum adaptability thanks to dynamic, continuous con-trol of the cold water volume flow.
● Control of the inlet air temper-ature and the temperature dif-ference for the best possible supply to your server systems.
Model No. SK 3301.460
Number of preassembled cooling modules 1
Rated operating voltage V/Hz 200 – 230, 1~, 50/60 400, 3~, 50/60
Dimensions in mmWHD
30020001000
Usable U 42 Useful cooling output Up to 20 kW
Pre-fuse 10 APower consumption Pel max. 600 WCooling medium WaterPermissible operating pressure p. max. 5 barDuty cycle 100 %Electrical connection Connection cable Water connection 1˝ external threadWeight 230 kgColour RAL 7035Temperature control Via integral controllerMax. air throughput 3000 m3/h
Touchscreen display for LCP Smart, Model No. see page 186.
Accessories Page 186 IT chillers From page 146 Server racks Cat. 32, from page 774
144 Rittal System Climate Control
LCP Inline, useful cooling output up to 30 kW
Liquid Cooling Package
kage
T1B
H
B = WidthT = Depth
Applicatiooperation:The LCP Insiting withinsuite. The hfrom the rothe rear of expelled foaisle, wherIT equipmeThe LCP Inmum perfociency in ccold aisle cproduct, a necessary.
ac
n and mode of line is designed for a bayed enclosure ot air is extracted
om or warm aisle at the unit, cooled, then rwards into the cold e it is available to your nt. line achieves maxi-rmance and effi-onjunction with Rittal ontainment. With this raised floor is not
Equipment: High-performance heat exchanger with very even temperature distribution. Integrated condensate management. Controller with networking capa-bility, compatible with all com-mon communication standards (SNMP, BACnet etc.).
Benefits: ● Combines the slimline design
of the LCP with the function of room air-conditioning.
● Climate control technology, specially designed for IT envi-ronments with comprehensive monitoring functions.
● Frame based on the popular TS 8 system.
Liqu
id C
oolin
g P
Model No. SK 3301.470Rated operating voltage V/Hz 230, 1~, 50/60 400, 3~, 50/60
Dimensions in mmBH
T1
30020001200
Usable U 42 Useful cooling output Up to 30 kW
Rated current 9.3 A/10.4 APre-fuse 16 A/16 ACooling medium Water1) Permissible operating pressure p. max. 5 barDuty cycle 100 % Electrical connection Connection cable Water connection 1˝ external thread Weight 230 kgColour RAL 7035 Temperature control Via integral controller Max. air throughput 4600/4300 m3/h
1) Water quality according to unit specifications.
Front cover
145Rittal System Climate Control
The optional front cover reduces the air outlet speed, thereby minimising draught effects. Model No. see page 186.
Accessories Page 186 IT chillers From page 146 Server racks Cat. 32, from page 774 Aisle containment Page 139
Chi
llers
for
IT c
oolin
g
Chillers for IT cooling
IT chillers in conjunction with free cooling, for example,
ensure efficient cooling and supply of the cooling
medium. Specially designed for supplying critical IT
applications cooled via LCP, air/water heat exchangers
or CRAC systems.
Safety-relevant options such as redundant pumps,
emergency cooling or buffer stores are the distinguish-
ing features of these atmospherically sealed systems.
146 Rittal System Climate Control
Rittal System Climate Control
Chi
llers
for
IT c
oolin
g
SafetyChillers are particularly well-suited for cooling IT applications, such as LCP or air/water heat exchangers. Redundant pumps and optional special equipment for emergency cooling or thermal recovery are the distinguishing features of these systems.
Piping systemThe Rittal piping system provides the link between the equipment and the refrigera-tion system.
Energy-saving free cooling chillersCold ambient air is used for cooling. If the ambient temperature is too high, the chiller will cut in. Free cooling systems are particu-larly energy-saving. The operating costs may be cut by up to 80 %. The service life of components is extended, and operational reliability is increased. The waste heat pro-duced may be effectively used for heating and hot water supply in facility management.
Energy savings
of up to 80 %
Benefits at a glanceCooling output from 15 to 462 kW● A system for cooling server racks and
IT applications● Compact structure with control
components in the front and air intake via both sides
● Individual project management● Commissioning and servicing● Comprehensive pipeline calculation● Global service network
Tips and tricksApplications see page 226
Selection criteria see page 227
Assembly see page 228
Notes see page 229
147
Chi
llers
for
IT c
oolin
g
Chillers for IT Cooling output 15 to 1
cooling23 kW
T
H
B
B = WidthT = Depth
Ap
plication: Especially for cooling IT applica-tions, such as LCP or air/water heat exchangers. Safety-rele-vant features such as redundant speed-controlled pumps, com-pressors or buffer stores are the distinguishing features of these atmospherically sealed systems.Technical design: ● Compact design with control
components in the front and air intake via both side pan-els, air outlet upwards.
● Pressure-sealed system. ● Digital thermostat for tempera-
ture control with setpoint and actual value display.
● Monitoring interface with Rittal CMC-TC supported.
● Integral automatic bypass valve.
● Flow monitor.
Supply includes:Chiller wired ready for connection, with multilingual documentation including functional diagram and wiring plans.
Options: ● Free cooling may be inte-
grated from 61 kW. Please follow the instructions!
● Buffer store for separate siting ● Emergency cooling with
mains water infeed ● Special voltages
Note:The illustration shows a unit with customer-specific options. Technical deviations in terms of cooling output, dimensions or weight are possible for unit types with free cooling.
Layout diagram, see page 266.
Model No. SK 3232.700 3232.710 3232.720 3232.730 3232.740 3232.750 3232.760 3232.770 3232.780 3232.790
Rated operating voltage V/Hz 400, 3~, 50
Dimensions in mmWHD
8151400 1560
8151400 1560
8151400 1560
100021802000
110016062450
110016062450
110016062450
110016062950
110018752950
110018752950
Cooling output at Tw = 15°C/Tu = 35°C 15 kW 24 kW 36 kW 48 kW 61 kW 72 kW 82 kW 92 kW 113 kW 123 kW
Power consumption 6900 W 9700 W 14600 W 21000 W 21400 W 24400 W 27500 W 31100 W 38900 W 42600 WRated current max. 23.0 A 25.0 A 37.0 A 46.5 A 71.2 A 74.2 A 77.2 A 83.2 A 106.1 A 112.1 ARefrigerant R407CPmax. cooling circuit 28 bar
Temperature rangeEnvironment –20°C to +43°CLiquid media +5°C to +15°C
Pump capacity 60 l/min. 120 l/min. 240 l/min. 500 l/min. Pump pressure 2.5 barNumber of cooling circuits 1 2Tank with 10 mm condensate insulation SteelTank capacity 48 l 100 l 300 l 500 lWater connections 1˝ 1 1/4˝ 2 ˝ 2 1/2˝ Operating weight 375 kg 390 kg 480 kg 710 kg 810 kg 849 kg 864 kg 949 kg 1150 kg 1175 kgColour RAL 7035 RAL 9002Protection category (electrics) IP 54Air throughput of fans m3/h 10880 14000 18000 13720 20450 27300 35000
Temperature control Electronic control with digital display (factory setting +15°C) Delivery times available on request. We reserve the right to make technical modifications. Cooling output makes allowance for 35 % glycol.
148 Rittal System Climate Control
Accessories Page 181
Chillers for IT coolingCooling output 145 to 462 kW
T
H
B
B = WidthT = Depth
Appl
r IT
coo
ling
ication: Especially for cooling IT applica-tions, such as LCP or air/water heat exchangers. Safety-rele-vant features such as redundant speed-controlled pumps, com-pressors or buffer stores are the distinguishing features of these atmospherically sealed systems.
Technical design: ● Compact design with control
components in the front and air intake via both side pan-els, air outlet upwards.
● Pressure-sealed system. ● Digital thermostat for tempera-
ture control with setpoint and actual value display.
● Monitoring interface with Rittal CMC-TC supported.
● Integral automatic bypass valve.
● Flow monitor.
Supply includes:Chiller wired ready for connection, with multilingual documentation including functional diagram and wiring plans.
Options: ● Free cooling may be inte-
grated from 61 kW. Please follow the instructions!
● Buffer store for separate siting ● Emergency cooling with
mains water infeed ● Special voltages
Note:The illustration shows a customised unit design up to 180 kW. Technical deviations in terms of cooling output, dimensions or weight are possible for unit types with free cooling.
Layout diagram, see page 266.
Chi
llers
fo
Model No. SK 3232.800 3232.810 3232.820 3232.830 3232.840 3232.850 3232.860 3232.870 3232.880
Rated operating voltage V/Hz 400, 3~, 50
Dimensions mmWHD
110018752950
110018752950
110018753950
220024503400
220024503400
220024503400
220024504250
220024504250
220024504250
Cooling output at Tw = 15°C/Tu = 35°C 145 kW 161 kW 193 kW 248 kW 280 kW 312 kW 372 kW 415 kW 462 kW
Power consumption 50900 W 57600 W 63700 W 89100 W 97300 W 105400 W 138000 W 148200 W 158400 WRated current max. 141 A 146 A 153 A 208 A 227 A 245 A 311 A 339 A 366 ARefrigerant R407CPmax. cooling circuit 28 bar
Temperature rangeEnvironment –20°C to +43°CLiquid media +5°C to +15°C
Pump capacity 500 l/min. 810 l/min. 1200 l/min. Pump pressure 2.5 barNumber of cooling circuits 2Tank with 10 mm condensate insulation SteelTank capacity 500 l 700 l 1000 lWater connections 2 1/2˝ 3˝ 4˝ Operating weight 1250 kg 1340 kg 1520 kg 2702 kg 2795 kg 2831 kg 3460 kg 3567 kg 3667 kgColour RAL 9002Protection category (electrics) IP 54Air throughput of fans m3/h 35500 60900 86000 76000 111000
Temperature control Electronic control with digital display (factory setting +15°C) Delivery times available on request. We reserve the right to make technical modifications. Cooling output makes allowance for 35 % glycol.
149Rittal System Climate Control
Accessories Page 181
Wat
er/w
ater
hea
t exc
hang
ers
Water/water heat exchangers
Water/water heat exchangers allow existing water
circuits within the company to be used, even if they
are not suitable for direct enclosure climate control,
such as water circuits with cooling tower, process or
well water, or aggressive or contaminated water.
150 Rittal System Climate Control
Rittal System Climate Control
ter/
wat
er h
eat e
xcha
nger
s
Interrogate operating statusesand make settings via the Web (TCP/IP).
RedundancyDouble pump, speed-controlled, with alter-nating 24 h operation.
Stainless steel pipeworkFor added safety (optional).
Wa
Benefits at a glance● Redundancy thanks to double pump unit
fitted with linear speed control● Linear controlled 3-way valve (4 – 20 mA) ● Floating contact for collective fault signal● Flow rate display and monitoring● Digital controller● Water connection in base● Integrated into a TS 8 enclosure● Compact construction mounted in a
tubular frame
ImportantThe pipework may also be supplied in stainless steel (1.4401).
151
Water/water heat exchangersLayout diagram
152
Wat
er/w
ater
hea
t exc
hang
ers
1
2
3
5
Ritt
7
4
8
al System Climate C
6
9
10
All climate control solutions from a single source:
Rittal aisle containment
CRAC systems
LCP Standard/Plus/Smart
+ Water/water heat exchangers
IT chiller
Double pump unit
Heat recovery
Buffer store
Emergency water supply
1
2
3
4 8
5
6
7
9
10
ontrol
Rittal System Climate Control
Cooling output 25 to 250 kW
Water/water heat exchangers
H
T
B
B = WidthT = Depth
Ap
chan
gers
plication: Water/water heat exchangers are primarily used to hydrauli-cally and physically separate a definable primary water circuit (dirt, pressure fluctuations) from a defined secondary water cir-cuit.
Technical design: ● Compact construction
mounted in a tubular frame● Integrated in a TS 8 enclosure● Digital controller ● Floating contact for collective
fault signal● Flow rate display and
monitoring● Water connection in base● Double pump unit fitted with
linear speed controller● Linear controlled 3-way valve
(4 – 20 mA)
Supply includes:Water/water heat exchanger wired ready for connection, with multilingual documentation including functional diagram and wiring plans.
Note:The illustration shows units with customer-specific options.
Accessories:
● Buffer store 1000 – 3000 l ● Standard pump with
automatic bypass ● Emergency water infeed ● Secondary flow monitor ● Ethernet, BACnet and
SNMP link ● Magnetic filter ● Pipework in stainless steel
1.4401 (AISI 316) ● Tubular frame,
without TS 8 enclosure
Layout diagram, see page 267.
Wat
er/w
ater
hea
t ex
Model No. SK 3232.900 3232.910 3232.920 3232.930 3232.940 3232.950 3232.960
Rated operating voltage V/Hz 400, 3~, 50
Dimensions incl. base/plinth in mm
WHD
1200 1900 800
1200 1900 800
1200 1900 800
1600 1900 800
1600 1900 800
2000 1900 800
2000 1900 800
Cooling output at Twp = 6°C/Tws = 15°C 25 kW 50 kW 75 kW 100 kW 150 kW 200 kW 250 kW
Power consumption 3.54 kW 5.7 kW 5.7 kW 10.4 kW 10.4 kW 13.6 kW 13.6 kWRated current max. 3.5 A 5.9 A 5.9 A 10.2 A 10.2 A 10.8 A 10.8 A
Temperature range Environment +5°C to +45°CTp primary side +6°C to +30°CTs secondary side +6°C to +30°C
Pump capacity (l/min.) primary/secondary 62 125 187 250 375 500 625
Pump pressure (bar)primary 1.5 – 6.0secondary (equipment) 2.5
Water connections primary/secondary RP 1˝ RP 1 1/4˝ RP 1 1/2˝ RP 2˝ RP 2˝ RP 2 1/2˝ RP 2 1/2˝ Weight 400 kg 450 kg 450 kg 700 kg 700 kg 900 kg 900 kgColour RAL 7035Protection category (electrics) IP 54Temperature control Electronic controller with digital display; +5°C to +50°C adjustment range
Delivery times available on request. Special voltages, other frequencies, and technical modifications available on request.
Air/water heat exchangers From page 102 TS 8 lock systems Cat. 32, from page 947 TS 8 baying system Cat. 32, from page 138Overflow valve Page 194 Cooling medium Page 194
153
Pip
ing
syst
ems
in th
e da
ta c
entr
e
Piping systems in
the data centreEfficient cooling solutions rely on an excellent infra-
structure. The Rittal piping system provides the link
between the equipment and the refrigeration system.
An optimum design and targeted media supply ensure
efficient operation of all cooling components. This also
includes safety-relevant options such as redundant
pumps, emergency cooling or buffer stores.
Rittal System Climate Control
154Speed-controlled pumps are used to convey the coolant. The pumped volume may be varied by using state-of-the-art EC motors.
Your practical benefit: Lower energy consumption thanks to “cold water on demand”. Only the volume of water that is actually needed for cooling is moved through the system.
The standard hydraulic layout includes the use of a hydraulic separating filter. Different volumes of water on the producer side and equipment side for process cooling do not adversely affect the function of the cooling sys-tems.
Your practical benefit: Less energy consumption thanks to the use of free-cooling heat exchangers including redun-dancy.Chiller pumps may be switched on and off as required.
Use of compact distributors to distrib-ute the cooling medium among differ-ent pieces of equipment.
Your practical benefit: Redundancies in the supply lines to the equipment may be designed as required. For example, a layout can be designed to facilitate the auto-matic shut off of sub-sections in the event of pipe leaks.
Piping systems in the data centre
● Pipeline systems are part of a turnkey solution for the targeted cooling of IT operating environments
● Media network for the connection of coolers (IT chillers) and cooling equipment (liquid cooling package and CRAC systems)
● Free scalability of chiller and equipment output via the hydraulic separation of the producer and equipment sides
● Use of a hydraulic separating filter with dual function as a buffer store
● Maximum energy efficiency thanks to the use of polypropylene piping with exceptionally low pipe friction losses
● Systems are suitable for the use of cold water and water/antifreeze mixtures (glycol)
● Media pumping redundancy by fitting every chiller with its own primary pump and via the use of redundant main pumps on the equipment side
155
Pip
ing
syst
ems
in th
e da
ta c
entr
e1 2
4
3
7
5 6
Rittal System Climate Control
The innovative polypropylene piping is distinguished by minimal pipe friction resistance.
Your practical benefit: Less energy consumption for conveying the cooling medium, thanks to lower flow resistance. The material is corrosion-resistant and may be machined without residues.
Direct cooling systems (e.g. LCP)
CRAC systems
IT chiller
Buffer store
1
2
3
4
Dirt collector station with maintenance bypass
Main pump (redundant)
Compact distributor with lockable outlets
5
6
7
156
Outdoor climate control
Ou
tdo
or
clim
ate
con
tro
l
Cooling units for CS modular enclosures from page 158
� � � � for roof-mounted type 1 . . . . . . . . . . . . . . . . . . . . . . . . . . 900 W. . . . . . . 160� � � for door-mounted type 2. . . . . . . . . . . . . . . . . . . . . . . . . . 900 W. . . . . . . 160� � � for wall-mounted type 3 . . . . . . . . . . . . . . . . . 900/1400/2500 W. . . . . . . 160� � � � for universal installation type 4 . . . . . . . . . . . . . . . . . . . . 1500 W. . . . . . . 160
Heat exchangers for CS modular enclosures from page 158
� � � for roof-mounted type 1 . . . . . . . . . . . . . . . . . . . . . . . . . 30 W/K. . . . . . . 161� � � � for roof-mounted type 2 . . . . . . . . . . . . . . . . . . . . . . . . . 60 W/K. . . . . . . 161� � � for wall-mounted type 3 . . . . . . . . . . . . . . . . . . . . . . . . . 60 W/K. . . . . . . 161� � � for door-mounted type 4. . . . . . . . . . . . . . . . . . . . . . .40/60 W/K. . . . . . . 162� � � for door-mounted type 5. . . . . . . . . . . . . . . . . . . . . .85/120 W/K. . . . . . . 162
Climate control units for Toptec CR from page 158
� � � Heat exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . .85/105 W/K. . . . . . . 163� � � � Cooling units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000/1600 W. . . . . . . 163
Ex-proof climate control systems page
Ex overpressure enclosure with integral enclosure cooling unit . . . . . . . 164
Integral heater
Protection category IP 55
Aluminium
Roof-mounted
Wall-mounted
Rittal System Clima
157te ControlOut
door
clim
ate
cont
rol
Outdoor climate control
Rittal Communication Systems offer everything you
need to protect your electronic equipment, from
weather-tested enclosure solutions, to a variety of
climate control components, through to complete
security management systems. Cooling units, heat
exchangers, fans and heaters especially designed for
outdoor use ensure constant interior temperatures. A
protection category of IP 55 is retained for the system
as a whole when using Outdoor heat exchangers and
cooling units.
158 Rittal System Climate Control
FlexibilityClimate control modules in varying output categories may be posi-tioned on the door, rear panel, side panel or roof of the modular enclo-sure.Suitable for use within the tem-perature range –33°C to +55°C (cooling units) and +65°C (heat exchangers). Many units feature an integral heater.
Rittal System Climate Control
te c
ontr
ol
Standardised installationThe full 25 mm double wall takes care of heat exchange and minimises the influence of sunlight, featuring an active climate con-trol concept with fixed cut-out sizes and a mounting frame for depth-variable position-ing of the climate control unit. Depending on the local conditions at the installation site, either a heat exchanger or a cooling unit may be used.
Heat exchanger/cooling unitWith three mounting positions for internal mounting, partial internal mounting or exter-nal mounting plus a choice between cooling via the front or rear door of the Toptec CR.
Out
door
clim
a
Benefits at a glance● The IP 55 protection category of the
enclosures is retained.● Hermetically separate air circuits –
Pollutant-laden ambient air is unable to penetrate the enclosure
● Backup-compatible 48 V DC air/air heat exchangers
● Integral heater in many units
Important● CS Outdoor cooling units and CS Out-
door heat exchangers are manufactured to order.
● CS Outdoor cooling units and CS Out-door heat exchangers are supplied as fully integrated units on the CS Outdoor enclosure. Mounting on other Rittal enclosures is only possible by arrange-ment.
159
CS
Out
door
clim
ate
cont
rol
CS Outdoor climatCooling units for CS modular
e control enclosures
Type 1 for roof m
ountingWith microcontroller and 400 watt heater as standard.Mounting frame:Required for CS 9764.012.
Type 2 for door mountingWith microcontroller and 400 watt heater as standard.
Type 3 for wall mountingWith microcontroller and 400 watt heater as standard. Alternative mounting on the rear or side panels is also possible. The picture shows the cooling unit with designer cover (not included in the supply).
Type 4 for universal installationWith microcontroller and 800 watt heater as standard.
Installation options: ● in the door or rear panel● in the side panel
Model No. CS 9762.012 9768.100 9761.012 9761.032 9761.042 9768.150 Page
Internal mounting Type 1 Roof-mounted
Type 2 Door-mounted
Type 3 Wall-mounted
Type 4 Universal
Rated operating voltage AC 230 V, 50/60 Hz
Unit dimensions (mm)WHD
535 390 400
430 1070 210
515 1170 151.5
695 1132 151.5
776 1100 250
400 1050 310
Minimum enclosure dimensions (mm)
W x H/D x H – 600 x 1200 600 x 1200 800 x 1200 800 x 1200 600 x 1200W x D 600 x 500 – – – – –
Useful cooling output EN 814
L35 L35L35 L50
900 W750 W
900 W650 W
900 W750 W
1400 W1050 W
2500 W2000 W
1500 W1250 W
Heater 400 W 400 W 400 W 400 W 400 W 800 W
Rated current max. 4.0 A 4.0 A 3.5 A 5.5 A 10.0 A 5.8 AStart-up current max. 10.7 A 11.6 A 10.8 A 15.5 A 32.0 A 19.0 A
Power consumption L35 L35L35 L50
460 W520 W
470 W530 W
450 W520 W
900 W1000 W
1450 W1650 W
940 W1045 W
Coolant R134ap. max. 26 bar 28 bar 24 bar 24 bar 28 bar 28 barTemperature range –33°C to +55°CAir throughput of fans– unimpeded air flow
Internal circuit fan External circuit fan
570 m3/h 570 m3/h
580 m3/h 430 m3/h
880 m3/h 880 m3/h
850 m3/h 880 m3/h
1450 m3/h 1450 m3/h
850 m3/h 680 m3/h
Temperature control Microcontroller1) Type of connection Plug panelWeight 29 kg 31 kg 45 kg 48 kg 52 kg 40 kgProtection category to EN 60 529/IEC 529 IP 55 (internal circuit to external circuit)Material (enclosure) Aluminium Sheet steel AluminiumSurface finish Spray finished in RAL 7035CE Declaration of Conformity � � � � � � Accessories
Cable connection kit 9765.105 9765.105 9765.105 9765.105 9765.105 9765.105 180 Mounting frame 9765.051 – – – – – –
1) With temperature-controlled activation of the components (internal/external circuit, heater). Setpoints are preset. Modifications can only be made by arrangement.
Delivery times available on request.
Cooling units for modular enclosures are manufactured to order. The units are assembled and supplied connected to the modular enclosure. Adaptations to other enclosure platforms are available on request.
CS modular enclosures Cat. 32, page 874 Test adaptor Page 180 Heaters Page 169
160 Rittal System Climate Control
Heat exchan
CS Out
gers for CS modular enclosuresdoor climate control
Type 1 for
roof mounting Without microcontroller, without heater.Type 2 for roof mounting With microcontroller and heater as standard.
Mounting frame: Required for CS 9764.012.
Type 3 for wall mounting With microcontroller and heater as standard. For external mount-ing on side or rear panels. The picture shows the heat exchanger with designer cover (not included in the supply).
Property rights for Type 1 and 2: German patent no. 196 09 796
CS
Out
door
clim
ate
cont
rol
Model No. CS 9764.040 9764.012 9763.012 Page
Internal mounting Type 1 Roof-mounted
Type 2 Roof-mounted
Type 3 Wall-mounted
Rated operating voltage DC (fan/ microcontroller) 48 V
AC (heater) – 230 V, 50/60 Hz
Unit dimensions (mm)WHD
470 158 380
535 390 400
515 1170 151.5
Minimum enclosure dimensions (mm)
W x H/D x H – – 600 x 1200W x D 600 x 500 600 x 500 –
Specific thermal output 30 W/K 60 W/K 60 W/K
Heater – 400 W 400 W
Rated current max.
DC (fan/ microcontroller) 1.3 A 3.1 A 3.2 A
AC (heater) – 1.9 A 1.9 ATemperature range –33°C to +65°CAir throughput of fans– unimpeded air flow
internal/ external circuit fan 345 m3/h 830 m3/h 830 m3/h
Temperature control without1) Microcontroller2)
Type of connection Plug panelWeight 7 kg 17 kg 31 kgProtection category to EN 60 529/IEC 529 IP 55 (internal circuit to external circuit)Material (enclosure) Aluminium Sheet steelSurface finish Spray finished in RAL 7035CE Declaration of Conformity � � � UL/CUL – � � Accessories
Cable connection kit 9765.110 9765.110 9765.110 180 Thermostat 3110.000 – – 178 Mounting frame – 9765.051 – –
1) Customers may fit their own temperature control (SK 3110.000). 2) With temperature-controlled activation of the components (internal/external circuit, heater).
Setpoints are preset. Modifications can only be made by arrangement.
Delivery times available on request.
Heat exchangers for modular enclosures are manufactured to order. The units are assembled and supplied connected to the modular enclosure. Adaptations to other enclosure platforms are available on request.
161Rittal System Climate Control
CS modular enclosures Cat. 32, page 874 Test adaptor Page 180 Heaters Page 169
CS OutdHeat exchang
CS
Out
door
clim
ate
cont
rol
oor climate controlers for CS modular enclosures
Type 4
for door mountingWith microcontroller and 400 watt heater as standard.Type 5 for door mountingWith microcontroller and heater as standard.
Model No. CS 9768.032 9768.012 9768.042 9768.062 Page
Internal mounting Type 4 Door-mounted
Type 5 Door-mounted
Rated operating voltage DC (fan/ microcontroller) 48 V
AC (heater) 230 V, 50/60 Hz –
Unit dimensions (mm)WHD
480 1005 110
510 1005 150
445 1050 150
575 1050 195
Minimum enclosure dimensions (mm)
WH
600 1200
650 1200
650 1300
800 1300
Specific thermal output 40 W/K 60 W/K 85 W/K 120 W/K
Heater 400 W –
Rated current max.
DC (fan/ microcontroller) 2.0 A 3.2 A 6.4 A 7.9 A
AC (heater) 1.9 A –Temperature range –33°C to +65°CAir throughput of fans– unimpeded air flow
internal/ external circuit fan 515 m3/h 530 m3/h 1020 m3/h
Temperature control Microcontroller1)
Type of connection Plug panel Sub-D connector 13W32)
Weight 13 kg 15 kg 28 kg 32 kgProtection category to EN 60 529/IEC 529 IP 55 (internal circuit to external circuit)Material (enclosure) AluminiumSurface finish Spray finished in RAL 7035CE Declaration of Conformity � � � � UL/CUL � � � � Accessories
Cable connection kit 9765.110 9765.110 9765.115 – 180 1) With temperature-controlled activation of the components (internal/external circuit, heater).
Setpoints are preset. Modifications can only be made by arrangement. 2) Special connection cable included in the supply.
Delivery times available on request.
Heat exchangers for modular enclosures are manufactured to order. The units are assembled and supplied connected to the modular enclosure. Adaptations to other enclosure platforms are available on request.
162 Rittal System Climate Control
CS modular enclosures Cat. 32, page 874 Test adaptor Page 180 Heaters Page 169
2
Clima
CS Outdo
B2
H2
T1
B1
H1
B = WidthT = Depth
te control units for Toptec CR
or climate control
1
Heat e1
xchanger/cooling unit With three mounting positions for internal mounting, partial internal mounting or external mounting plus a choice between cooling via front or rear door.Heat exchanger/cooling unit, built into the Toptec CR.
2
CS
Out
door
clim
ate
cont
rol
Heat exchangers Cooling units PageModel No. CS 9776.100 9776.150 9776.500 9776.550
Internal mounting Universal Universal
Rated operating voltageDC 48 V –AC – 230 V, 50/60 Hz
Unit dimensions (mm)B1H1T1
500 1000 150
500 1000 200
500 1000 150
500 1000 260
Minimum enclosure dimensions (mm) W x H 800 x 1200 800 x 1200Specific thermal output 85 W/K 105 W/K – –
Useful cooling output EN 814
L35 L35L35 L50 – – 1000 W/1180 W
650 W/700 W 1600 W/1750 W1200 W/1250 W
Heater – – 400 W
Rated current max.
DC 4.2 A 4.5 A – –AC – 5.0 A/5.0 A 6.0 A/6.8 A
Start-up current max. – 24.0 A/22.0 A 34.0 A/32.0 A
Power consumption L35 L35L35 L50 – 640 W/760 W
780 W/920 W960 W/1170 W1125 W/1310 W
Coolant – R134ap. max. – 28 bar 28 barTemperature range –33°C to +65°C –33°C to +55°CAir throughput of fans– unimpeded air flow
internal/external circuit fan 530 m3/h 1130 m3/h 600/625 m3/h
600/625 m3/h880/950 m3/h1000/1090 m3/h
Temperature control Microcontroller1) Microcontroller2) Type of connection Plug panel Female multi-point connector 9-poleWeight 22 kg 30 kg 35 kg 45 kgProtection category to EN 60 529/IEC 529 IP 55 (internal circuit to external circuit)Material (enclosure) AluminiumSurface finish Spray finished in RAL 7035CE Declaration of Conformity � � � � Accessories
Cable connection kit 9765.115 – – – 180 1) With temperature-controlled activation of the components (internal/external circuit, heater).
Setpoints are preset. Modifications can only be made by arrangement. 2) Settings may be amended directly on the unit display.
163Rittal System Climate Control
Toptec CR Cat. 32, page 877 Heaters Page 169
Ex-
proo
f clim
ate
cont
rol s
yste
ms
Ex-proof climate controEx overpressure enclosure with integ
l systemsral enclosure cooling unit for zone II (gas)
Ex-proof climate control systems for zone II (gas) provide protection for high-tech monitoring systems in the oil and gas extraction industry.These days, high-tech monitoring systems have become a permanent feature in almost every sector. Whether in indus-trial zones or public areas, a sophisticated camera system makes everything more transparent and manageable. In this specialist field, it is necessary to ensure signal tranasmis-
sion over long distances, from the camera systems to the control room. To this end, amplifier units, known as concen-trators, are needed, and are installed half-way between the camera system and the control room. The technical challenge faced by climate control technology in these applications is the potentially explosive zone II (gas) occur-ring in selected areas of the oil and gas extracting industry.
164
The compressed air connection including control unit integrated into the enclosure ensures a constant overpressure (2 mbar). This produces an ex-free zone in the enclosure interior.
The design challenge with this type of climate control technology is to arrange the external air circuit with all the components of the cooling circuit in such a way that effective cooling out-put is provided, while at the same time meet-ing the ex-proof requirements for zone II (gas).
Rittal System Climate Control
Further information available on request.
Ex overpressure enclosure with integral enclosure cooling unit for zone II (gas)
Ex-proof climate control systems
These concentrator units must be kept at a certain internal temperature in order to ensure optimum performance capabilities and transmissions from the camera systems. Rittal has taken up the challenge and designed enclosure and climate control components for use in potentially explo-
sive zone II. A compact cooling output of up to 4 kW is ensured by a unit designed specifically for potentially explosive areas.
5
Ex-
proo
f clim
ate
cont
rol s
yste
ms
Rittal System Climate Control
The sealed cover and intelligent filter design in the extraction zone of the external circuit provides effective protection against exter-nal ambient influences such as coarse dust or even sand.
Special fans designed for potentially explosive areas are used here.
16
Control of the cooling unit with the popular Comfort controller ensures an efficient supply of useful cooling output. Visualisation of the operating states and the current enclosure internal temperature are easily read via the display positioned centrally in the enclosure.
Enclosure heaters
Enclosure heaters from page 168
� � � Enclosure heaters . . . . . . . . . . . . . . . . . . . . . . . . . . 10 – 150 W. . . . . . . 169� � � Enclosure heaters . . . . . . . . . . . . . . . . . . . . . . . . . 250 – 800 W. . . . . . . 169
Indoor
Outdoor
with fan
without fan
Rittal System Clima
En
clo
sure
hea
ters
Benefits at a glance● Useful cooling output from 10 to
800 watts● Self-regulating PTC technology● Quick-assembly system
Important● For the correct temperature and to avoid
condensation, use a thermostat and/or hygrostat, see page 178
● Heaters should always be installed in an upright position. Leave a distance of 50 mm at the top and bottom to allow convection
● The thermal output is increased with fans ● Heat is distributed evenly in large
enclosures by using several low-output heaters
Tips and tricksApplications see page 234
Assembly see page 234
Electrical connection see page 234
167te Control
Enc
losu
re h
eate
rs
168
Enclosure heaters
Condensation poses a particular risk for control
electronics, especially with outdoor siting, but also
indoors. A range of output categories ensures that the
correct thermal output is always available. In this way,
the total required thermal output can be distributed
with complete accuracy within an enclosure.
Fast assemblyAchieved using snap fastening on 35 mm support rails to EN 50 022 or via screw fastening directly onto the mounting plate.
Fully wired unit ready for connectionClamp-type terminal connection for simple, effective wiring.
Rittal System Climate Control
Continuous thermal output 10 – 800 W
Enclosure heaters
B = WidthT = Depth
SuRetyp
No● T
(mt
● I
pply includes:ady-to-install unit with clamp-e terminal connection
te: hermostat SK 3110.000 see accessories) is recom-ended for precise tempera-
ure control in the enclosure. n order to prevent condensa-
tion on assemblies, hygrostat SK 3118.000 (see accesso-ries) is recommended to regulate heating.
● In larger enclosures, even heat distribution is best achieved by installing several low-output heaters.
● The installation of heaters is generally advisable, even when using heat exchangers and cooling units, in order to prevent condensation.
Approvals, see page 297.
Detailed drawing,see page 267.
ure
hea
ters
Enclosure heaters without fan
Model No. SK 3105.110 3106.120 3115.130 3116.140 3107.150 3107.160 3102.170
Dimensions in mmWHD
81 123 49
8116449
10215560
10222560
10226081
14020560
14025081
Rated operating voltage V, Hz 110 – 240 V ACContinuous thermal output at Tu = 10°C 10 W 20 W 30 W 50 W 75 W 100 W 150 W
Pre-fuse T 2 A 4 AAccessories Packs of PageThermostat 1 3110.000 178 Hygrostat 1 3118.000 178 Temperature indicator 1 3114.100 177
Special voltages available on request. We reserve the right to make technical modifications.
Encl
os
Enclosure heaters with fanModel No. SK 110 V 3105.210 3105.220 3105.230
Model No. SK 230 V 3105.180 3105.190 3105.200
Dimensions in mmWHD
142170101
142170101
142170101
Rated operating voltage V, Hz 110 or 240 V ACContinuous thermal output at Tu = 10°C 250 W1) 400 W1) 800 W1)
Pre-fuse gG for 110 V 4 A 6 A 10 APre-fuse gG for 230 V 4 A 6 A 6 AAccessories Packs of PageThermostat 1 3110.000 178 Hygrostat 1 3118.000 178 Temperature indicator 1 3114.100 177
1) Output with fan. Special voltages available on request. We reserve the right to make technical modifications.
Accessories Page 171 Configuration software Page 195
169Rittal System Climate Control
System accessories
Air routing from page 174
Features from page 172
Air duct system ...............................................................................17490° deflector ..................................................................................174Shallow air duct system ..................................................................175Shallow duct extension ..................................................................175
Stoppers .........................................................................................175Air diverter ......................................................................................176Door-operated switch .....................................................................176
Control/regulation from page 177Digital enclosure internal temperature display and thermostat .....177Enclosure internal thermostat .........................................................178Hygrostat.........................................................................................178Bottom-mounted adaptor................................................................178Speed control..................................................................................179
Mounting adaptor for speed control ...............................................179Interface card .................................................................................179SK BUS system...............................................................................180Cable connection kit .......................................................................180Test adaptor ...................................................................................180
Mounting accessories from page 181Roof plates TS.................................................................................181Roof plates DK-TS...........................................................................181Vent attachment TS.........................................................................182Trim frame.......................................................................................182
Quick-change frame .......................................................................182Adjustable frame.............................................................................183Adaptor frame.................................................................................183Integrated louvres...........................................................................183
esso
ries
Cold Plate from page 184System attachment .........................................................................184Fluid distributor ...............................................................................184Direct fluid connection ....................................................................184Flexible hose...................................................................................184
Quick-action vent valve ..................................................................184Elbow coupling ...............................................................................185Double-nipple coupling .................................................................185Temperature sensor TF25...............................................................185
Sys
tem
acc
Liquid Cooling Package from page 186 Cooling module...............................................................................186Touchscreen display.......................................................................186Front cover ......................................................................................186Vertical shielding ............................................................................186Horizontal shielding ........................................................................187Covers.............................................................................................187
Accessories for rack sealing ..........................................................187Vent valve .......................................................................................188Connection hose.............................................................................188Quick-release fastener ...................................................................188Add-on cover ..................................................................................188
Filter technology from page 189Filter mats for centrifugal fans ........................................................189Filter mats for cooling units ............................................................189Metal filter........................................................................................190Lint screen ......................................................................................191
Louvred grille for lint screen ...........................................................191Spare filter mats..............................................................................191Fine filter mats for fan-and-filter units .............................................191
General from page 192Wide-range power pack 24 V (DC) for thermoelectric cooler ........192Electric condensate evaporator......................................................192Condensate collecting bottle ..........................................................192Condensate hose............................................................................192Outlet filters .....................................................................................193Hose-proof hoods ...........................................................................193
Front outlet grille, 2 U, for centrifugal fans......................................193Filter holder .....................................................................................194Overflow valve ................................................................................194Flow regulator valve........................................................................194Cooling medium for recooling systems ..........................................194
Software service from page 195Therm Software...............................................................................195EPLAN Cabinet ...............................................................................195
RiDiag II ..........................................................................................195
171Rittal System Climate Control
Sys
tem
acc
esso
ries
System accessories
Finding the perfect climate control solution is now even
easier, with matching system accessories. Superbly
coordinated components tailor the climate control
components perfectly to your specific requirements.
Be it targeted air routing or precise control of the
equipment, Rittal has the perfect solution for
everything.
172 Rittal System Climate Control
Rittal System Climate Control
OPC
Sys
tem
acc
esso
ries
SNMP
PC
TCP/IP
Air duct systemfor TopTherm roof-mounted cooling systemsCold air can be routed directly to specific areas of the enclosure using the air duct system. The risk of “short circuits” in the air circula-tion due to self-ventilated installed devices is therefore eliminated.
Interface boardfor TopTherm cooling systems with Comfort controllerThe interface card is an extension for TopTherm cooling systems with Comfort controller. In this way it is possible, e.g. to monitor a master/slave combination of up to 10 cooling systems. Control is via stand-ardised interfaces: RS232 (DB9) or RS485, one PLC interface (DB9). RS422 (RJ 45 jack) is the connection to the Rittal CMC-TC. In this way, remote monitoring via TCP-IP, graphical interfaces for operation, evalua-tion and control, documentation, and con-nection to additional sensors for access control and monitoring are possible.
Recooling
Roof platesFor fast mounting of:● TopTherm roof-mounted cooling units● TopTherm air/water heat exchangers● TopTherm roof-mounted fans● Vent attachment TSThe cut-outs are pre-integrated into the roof plate.
Benefits at a glance● Complete system solutions● Simple assembly● Fast ordering
ImportantDetails of direct matching accessories and (where applicable) Model Numbers may be found in the relevant product ordering table.
173
Sys
tem
acc
esso
ries
System accessories
174
Air routing
Air duct systemfor TopTherm roof-mounted cooling units and air/water heat exchangersIt is possible to route the cold air directly to specific areas of the enclosure using the air duct system. The risk of “short circuits” in the air circulation due to self-ventilated installed devices is therefore eliminated.The length of the shallow duct is 1500 mm, and it may be cut to any required length.
Material:Flame-resistant plastic to DIN 4102/B1
Supply includes:Shallow duct, compensating hose.
Accessories:
Deflector 90°, see page 174. Stopper, see page 175.
Also required:
TS support strips for securing the shallow duct in a vertical direction, see Cat. 32, page 997.
Note:Do not direct cold air straight at active compo-nents. When using the ducting system, the performance of the cooling unit may be reduced, depending on the application in question.
For Packs of Model No. SKAir duct system
SK 3209. . . ./SK 3210. . . ./SK 3273. . . ./SK 3359. . . ./SK 3382. . . ./SK 3383. . . ./SK 3384. . . ./SK 3385. . . . 1 3286.870
SK 3386. . . ./SK 3387. . . . 1 3286.970
Deflector, 90°for air duct systemFor targeted air deflection at the end of the shallow channel.
Material:Flame-resistant plastic to DIN 4102/B1
Packs of Model No. SK
1 3286.990
Rittal System Climate Control
System accessories
Sys
tem
acc
esso
ries
Air routing
175Rittal System Climate Control
Shallow air duct systemfor TopTherm roof-mounted cooling units and air/water heat exchangers, to fit TS 8 enclosures from a width of 800 mm.It is possible to route the cold air directly to specific areas of the enclosure using the air duct system. The risk of “short circuits” in the air circulation due to self-ventilated installed devices is therefore eliminated.The length of the shallow duct is 1500 mm, and it may be cut to any required length.
Material:Flame-resistant plastic to DIN 4102/B1
Supply includes:Shallow duct, adaptor, compensating piece, deflector 90°.
Accessories:
Deflector 90°, see page 174. Stopper, see page 175.
Also required:
Shallow duct extension SK 3286.860 to compen-sate for the enclosure width and height. TS support strips for securing the shallow duct in a vertical direction, see Cat. 32, page 997.
Note:Do not direct cold air straight at active compo-nents. When using the ducting system, the performance of the cooling unit may be reduced, depending on the application in question.
Max. 1 x
Max. 2 x
SK 3359. . . . /SK 3382. . . . SK 3386. . . . /SK 3387. . . .
SK 3209. . . . /SK 3210. . . . SK 3383. . . . /SK 3384. . . . SK 3385. . . .
For Packs of Model No. SKShallow air duct system
SK 3209. . . ./SK 3210. . . ./SK 3273. . . ./SK 3359. . . ./SK 3382. . . ./SK 3383. . . ./SK 3384. . . ./SK 3385. . . . 1 3286.850
Note:Observe max. no. of stoppers per unit.
Shallow duct extensionExtension kit for shallow air duct system SK 3286.850 for width, depth or height length extensions in TS 8 enclosures.
Material:Flame-resistant plastic to DIN 4102/B1
Supply includes:1500 mm shallow duct, connection piece.
Packs of Model No. SK
1 3286.860
Stoppersfor TopTherm roof-mounted cooling units To cover unneeded cold air outlets in TopTherm roof-mounted cooling units.
Material:Polyurethane foam
For Max. no. of stoppers per unit Packs of Model No. SK
SK 3359. . . ./SK 3382. . . . 1 2 3286.780
SK 3209. . . ./SK 3210. . . ./SK 3273. . . ./SK 3383. . . ./SK 3384. . . ./SK 3385. . . . 2 2 3286.880
SK 3386. . . ./SK 3387. . . . 1 2 3286.980
System accessoriesS
yste
m a
cces
sori
es
Air routing
176 Rittal System Climate Control
Air diverterFor use in climate controlled enclosures, climate control doors, climate control side panels and TopTherm wall-mounted cooling units. For targeted air routing of the cold air in a down-ward direction. Particularly well-suited for densely-packed elec-trical components in the lower section of the enclosure.
Material:Sheet steel
651)
External air circuit
Internal air circuit
1) 115 mm for SK 3213.330
For Model No. SK
SK 8607. . . ./SK 8687. . . .SK 3306. . . ./SK 3331. . . . 3213.300
SK 3304. . . ./SK 3305. . . . 3213.310
SK 3328. . . ./SK 3329. . . . 3213.320
SK 3332. . . . 3213.3301)
Door-operated switchWithout connection cableFor activation/deactivation of enclosure lights, for deactivation of cooling units and air/water heat exchangers whilst the door is open (to prevent condensation) or for monitoring the door.
No drilling required for installation.
Supply includes:Door-operated switch including mounting accessories
Packs of Model No. SZ
1 4127.000
Rittal System Climate Control
System accessories
Sys
tem
acc
esso
ries
Control/regulation
Digital enclosure internal temperature display and thermostatFor installing on the enclosure door or wall and in a cooling unit or heat exchanger.
Technical specifications: ● Small dimensions. ● Depth: 100 mm. ● The 3-digit 7-segment display is 13 mm high
and clearly legible. ● Can be switched from °C/°F. ● The display can be used in a temperature
range from +5°C to +70°C. ● Includes 1500 mm long NTC sensor. ● Two relay outputs as change-over contact and
normally open contact (maximum contact load 230 V, 6 A).
● Freely selectable switching difference. ● The freely adjustable setpoint values can be
adjusted via the membrane keyboard at the front. Setting range: +5°C to +55°C.
● Display and switching accuracy +/– 2 K. ● Mounting cut-out 68 x 33 mm. ● The minimum and maximum recorded tempera-
tures are stored until it is next reset.
Rated operating voltage Model No. SK
230 V (AC) 3114.100
115 V (AC) 3114.1151)
24 V (DC) 3114.0241) 1) Delivery times available on request.Special requirements available on request.
Digital enclosure internal temperature display and thermostatIntegrated into a patch panel 1 U. Including cable attachment for connection cable and label holder.
Rated operating voltage: 230 V (AC) Special voltages available on request.
Technical specifications: ● Small dimensions. ● Depth: 100 mm. ● The 3-digit 7-segment display is 13 mm high
and clearly legible. ● Can be switched from °C/°F. ● The display can be used in a temperature
range from +5°C to +70°C. ● Includes 1500 mm long NTC sensor. ● Two relay outputs as change-over contact and
normally open contact (maximum contact load 230 V, 6 A).
● Freely selectable switching difference. ● The freely adjustable setpoint values can be
adjusted via the membrane keyboard at the front. Setting range: +5°C to +55°C.
● Display and switching accuracy +/– 2 K. ● Mounting cut-out 68 x 33 mm. ● The minimum and maximum recorded tempera-
tures are stored until it is next reset.
Supply includes:Patch panel, temperature display and thermostat, identification strip.
Colour Model No. DK
RAL 7035 7109.035
177
System accessoriesS
yste
m a
cces
sori
es
Control/regulation
Enclosure internal thermostatEspecially suitable for controlling fan-and-filter units, heaters and heat exchangers, this thermo-stat can also be used as a signal generator for monitoring the enclosure internal temperature.
Technical specifications: ● Bi-metal sensor as a temperature-sensitive
element with thermal feedback. ● Contact population: Single-pole change-over
contact as a quick-break contact. ● Permissible contact load:
Cat. 5 – 3 (heating) AC 10 (4)1) A, DC = 30 W cat 5 – 4 (cooling) AC 5 (4)1) A, DC = 30 W (1)) = inductive load at cos ϕ = 0.6
● Setting range: +5°C to +60°C ● Weight: approx. 105 g ● Dimensions: 71 x 71 x 33.5 mm ● Switching difference: approx. 1 K ± 0.8 K.
● A broad voltage spectrum i.e. just one model covers 24 to 230 V.
● Time-saving connection technique using a terminal strip with a screw connection from the outside.
● Flexible mounting on a vertical or horizontal 35 mm support rail to EN 50 022, and snap fastening in the TS/ES enclosure section using the supplied adaptor.
Rated operating voltage Model No. SK
230/115/60/48/24 V (AC)3110.000
60/48/24 V (DC)
HygrostatThe hygrostat switches on the heater and/or fan when a preset relative humidity in the enclosure is exceeded. In this way, the relative humidity is raised above the dew point, and condensation on assemblies or electronic components is avoided.
Technical specifications: ● Contact population: Single-pole change-over
contact as a quick-break contact. ● Permissible contact load:
AC ~ 5 (0.2)1) A DC = max. 20 W (1)) = inductive load at cos ϕ = 0.6
● Setting range: 50 – 100 % relative humidity ● Weight: approx. 100 g ● Dimensions: 71 x 71 x 33.5 mm ● Switching difference: approx. 4 %
● A broad voltage spectrum i.e. just one model covers 24 to 230 V.
● Time-saving connection technique using a terminal strip with a screw connection from the outside.
● Flexible mounting on a vertical or horizontal 35 mm support rail to EN 50 022, and snap fastening in the TS/ES enclosure section using the supplied adaptor.
Rated operating voltage Model No. SK
24 – 230 V (AC/DC) 3118.000
Bottom-mounted adaptorfor enclosure internal thermostat SK 3110.000 and hygrostat SK 3118.000Bottom-mounted adaptor with mounting option for screwed cable glands, for targeted cable infeed from appropriate equipment such as SK fan-and-filter units and enclosure heaters. In conjunction with screwed cable glands, it is also suitable for use as strain relief.
Packs of Model No. SK
1 3110.200
178 Rittal System Climate Control
System accessories
Sys
tem
acc
esso
ries
Control/regulation
Speed controlTemperature-dependent speed control for Rittal fan-and-filter units and air/air heat exchangers with a rated operating voltage of 230 V AC, for noise reduction and to save energy in part-load operation.
Technical specifications: ● For mounting on a 35 mm support rail
DIN EN 50 022 ● Dimensions (W x H x D):
180 x 94 x 57 mm ● Rated operating voltage:
230 V (AC)/115 V (AC) ● Setting range: +20°C to +55°C ● Phase cross-over with microcontroller ● Maximum fan output 250 W or 1.2 A
at 230 V (AC) ● Maximum fan output 100 W or 1.2 A
at 115 V (AC)
Supply includes:Speed control, built into a PK enclosure 9512.100, NTC sensor, length 1.80 m.
Rated operating voltage Model No. SK
230 V (AC) 3120.000
115 V (AC) 3120.1151) 1) Delivery times available on request.
Mounting adaptor for speed controlThe mounting adaptor enables direct attachment of the speed control SK 3120.000/.115 to the vertical frame sections of network enclosures.
Material:Sheet steel, zinc-plated, passivated
Supply includes:Mounting adaptor including assembly parts.
Packs of Model No. DK
1 set 7526.964
Interface card for TopTherm cooling units with Comfort controller The interface card is an extension for TopTherm cooling units with Comfort controller. In this way it is possible, e.g. to monitor a master/slave com-bination of up to 10 cooling units in conjunction with a Rittal CMC-TC. Control is achieved via standardised interfaces: RS-232 (DB9) or RS-485, one PLC interface (DB9). RS-422 (RJ 45 jack) is the connection to the Rittal CMC-TC. Remote monitoring via TCP-IP, graphical interfaces for operation, evaluation and control, documentation and connection of additional sensors for access control is therefore possible. The extension card is built into a 1 U plastic housing. A voltage supply of 24 V DC is needed. This may be supplied from the CMC-TC via a wide-range power pack DK 7320.425 (100 to 240 V AC, 50/60 Hz) or externally via a Kycon connector.
Supply includes:Interface card integrated into a plastic box W x H x D (mm): 136 x 44 (1 U) x 129. Serial SUB-D cable 1.5 m.
Note:Networking and monitoring plan may be found on the relevant product page on the Internet, under “Download”.
Packs of Model No. SK
1 3124.200
Rittal System Climate Control
179System accessoriesS
yste
m a
cces
sori
es
Control/regulation
SK BUS systemThe SK bus system facilitates communications between several enclosure cooling units, Rittal TopTherm .500/.510/.540, production date 05/02 or later, via a master/slave construction such as that required e.g. in complex bayed enclosure systems for optimum operating conditions.
Technical specifications:The master/slave construction facilitates common activation and deactivation via door limit switches, parallel activation and deactivation via a tempera-ture setpoint, and common collective fault signals and temperature logging, thereby eliminating the need for intricate wiring.
Supply includes:3 m shielded interface cable, including operating manual on programming the cooling units.
Note:nB = nK – 1 nB: Number of order units (SK bus system)nK: Number of cooling units to be linked.
Networking and monitoring plan may be found on the relevant product page on the Internet, under “Download”.
Property rights:German patent no. 196 15 469
35C
30C
25C
20C
20C
40C
35C
For Model No. SK
TopTherm 3124.100
Climate controlled enclosures 3124.000
Cable connection kit for CS Outdoor cooling unitsFor simple connection of CS cooling units. All cables preassembled with the corresponding connectors. Length of cables approx. 2500 mm.
Supply includes:1 set = 3 cables for AC, door-operated switch and alarm connection.
Note:Not required for CS 9776.500 and CS 9776.550.
Packs of Model No. CS
1 set 9765.105
Cable connection kit for CS Outdoor heat exchangers For simple connection of CS heat exchangers. All cables preassembled with the corresponding connectors. Length of cables approx. 2500 mm.
Note:Not required for CS 9776.150.
Design Model No. CS
3 cables for AC/DC and alarm connection 9765.110
2 cables for AC/DC and alarm connection 9765.115
Test adaptor for CS Outdoor climate control equipment The 9-pole sub-D interface allows testing of CS climate control equipment. Alternatively supports automatic or manual test procedures.
Supply includes:1 set = Test adaptor including 2 m connection cable.
Note:Not suitable for CS 9776.XXX.
Packs of Model No. CS
1 set 9765.050
180 Rittal System Climate Control
System accessories
Rittal System Climate Control
Roof plates TS For mounting: ● TopTherm roof-mounted cooling units ● TopTherm air/water heat exchangers● TopTherm roof-mounted fans ● Vent attachment TS The cut-outs in the roof plate are arranged in such a way that the TopTherm roof-mounted cooling units are positioned centrally on the enclosure.
Material:Sheet steel
Supply includes:Assembly parts.
Colour:RAL 7035
For enclosures W x D mm
To fit the mounting of
Model No. TS
600 x 600 SK 3359. . . .SK 3382. . . .SK 3149.4 . .SK 3149.8 . .
8801.3001)
800 x 600 8801.320
600 x 600 SK 3273.5. . SK 3383. . . . SK 3384. . . . SK 3385. . . . SK 3209. . . . SK 3210. . . . TS 8801.380
8801.3101)
800 x 600 8801.330
1200 x 600 8801.350
800 x 800 8801.920
800 x 600 SK 3386. . . . SK 3387. . . .
8801.3402)
1200 x 600 8801.3601) When mounting the cooling units, there may be a
collision with the eyebolts of the enclosure; for thisreason, roof fastening screws are supplied loose with the roof plates.
2) Attachment is from the inside using metal brackets andretaining clamps.
sori
es
For mounting B1mm
B2mm
T1 mm
T2mm
T3mm Model No. TS
SK 3382. . . ./SK 3359. . . .SK 3149.4 . ./SK 3149.8 . .
567.5 475 567.5 260 129.3 8801.300
767.5 475 567.5 260 129.3 8801.320
SK 3209. . . ./SK 3383. . . ./SK 3210. . . ./SK 3384. . . ./SK 3273. . . ./SK 3385. . . .
TS 8801.380
567.5 490 567.5 390 61.3 8801.310
767.5 490 567.5 390 61.3 8801.330
1167.5 490 567.5 390 61.3 8801.350
767.5 490 767.5 390 161.3 8801.920
SK 3386. . . ./SK 3387. . . .767.5 692 567.5 392 57.8 8801.340
1167.5 692 567.5 392 57.8 8801.360
T = Depth
Sys
tem
acc
es
Roof plates DK-TSFor mounting: ● TopTherm roof-mounted cooling units ● TopTherm air/water heat exchangers● TopTherm roof-mounted fans ● Vent attachment TS The cut-outs in the roof plate are arranged in such a way that the TopTherm roof-mounted cooling units are positioned centrally on the enclosure.
Material:Sheet steel
Colour:RAL 7035
For enclosures W x D mm
To fit the mounting of
Model No. TS
600 x 900 SK 3209. . . .SK 3210. . . . SK 3273.5 . .SK 3383. . . . SK 3384. . . . SK 3385. . . .TS 8801.380
8801.410
600 x 1000 8801.420
800 x 900 8801.430
800 x 1000 8801.440
For mounting B1mm
B2mm
T1 mm
T2mm
T3mm Model No. TS
SK 3209. . . . SK 3210. . . . SK 3273.5 . .SK 3383. . . . SK 3384. . . . SK 3385. . . .TS 8801.380
567.5 490 867.5 390 211.3 8801.410
767.5 490 967.5 390 261.3 8801.420
567.5 490 867.5 390 211.3 8801.430
767.5 490 967.5 390 261.3 8801.440
Mounting accessories
13
T1B1
T2T3
B2
=
=
B = Width
13
T1B1
T2T3
B2
=
=
B = WidthT = Depth
181
System accessoriesS
yste
m a
cces
sori
es
Mounting accessories
182 Rittal System Climate Control
Vent attachment TS For passive ventilation with labyrinthine air flow routing, to match the roofs for TopTherm roof-mounted cooling units.
Colour:RAL 7035
Protection category:IP 43
Supply includes:Assembly parts.
37.5
495595
For roof plates with cut-out Model No. TS
490 x 390 mm 8801.380
Trim framefor slimline cooling unitsSlimline cooling units can be internally or exter-nally mounted on an enclosure door or wall. The trim frame presents a closed front for the cooling unit.
Material:Sheet steel
Colour:RAL 7035 14
0
For cooling unit Model No. SK
SK 3366. . . .SK 3377. . . . 3377.000
Quick-change framefor TopTherm roof-mounted cooling units The quick-change frame is more than just an alter-nate frame. Together with the seal, the lower part of the frame is screw-fastened to the enclosure, making it possible to attach or remove the plug-in cooling unit to/from the top part of the quick-change frame. In case of servicing, this means minimal assembly times and hence minimal down-time. What is more, the quick-change frame offers effective protection against the ingress of oil into the enclosure in oily atmospheres, thanks to its integral drainage trough.
Material:Sheet steel
Colour:RAL 7035
Supply includes:Quick-change frame, seal, quick-release fasteners.
Property rights: German patent no. 41 10 323French patent no. 2 675 317 UK patent no. 2 254 735
For TopTherm cooling unit
Model No. SK
SK 3359. . . ./SK 3382. . . . 3286.700
SK 3209. . . ./SK 3210. . . .SK 3383. . . .SK 3384. . . . SK 3385. . . .
3286.800
SK 3386. . . . SK 3387. . . . 3286.900
System accessories
Sys
tem
acc
esso
ries
Mounting accessories
183Rittal System Climate Control
Adjustable framefor air/air heat exchangers, railway-compatible version
The adjustable frame allows variable partial instal-lation of air/air heat exchangers on enclosures, to facilitate optimum space utilisation.
Material:Sheet steel
Colour:RAL 7035
For heat exchangers Model No. SK
SK 3126.4. . 3286.260
SK 3128.4. ./SK 3129.4. . 3286.270
SK 3130.4. . 3286.280
Adaptor framefor wall-mounted cooling units
To compensate for the rear tilt of the TP consoles.
Material:Sheet steel
Surface finish:Powder coated in textured RAL 7035
Supply includes:Assembly parts.
245
167
481
77.520020077.5
20
329
8484
201
277
Ø7
Mounting cut-out1
Top edge of console
Adaptor frame
Cooling units SK 3302.3X0
1
2
3
2 3
For cooling units 300 W Cat. 32,
pagePacks
ofModel No.
TPModel No. SK
3302.3X0 642 1 6730.600
Delivery times available on request.
Integrated louvresFor ventilation by convection; easily retro-fitted using 4 screws.
Material:Sheet steel
Colour:RAL 7035
Detailed drawing, see page 268.
B H
T
W (B) mm
H mm
D (T)mm
Packs of Model No. SK
160 110 8 4 2541.235
210 100 8 4 2542.235
330 110 8 4 2543.235
To order in textured RAL 7032 please add extension .200 to the Model No., and for a primed version please add extension .300. Delivery times available on request.
System accessorieS
yste
m a
cces
sori
es
s
Cold Plate184 Rittal System Climate Control
System attachment for frequency converters For mounting frequency converters on the Cold Plate.
Supply includes:Wire clamp system, T-slot blocks.
For the attachment of frequency converters
Packs of
Model No. DCP
with all-round clamping surface 1 8616.700
with side clamping surfaces 1 8616.710
with clamping surfaces top and bottom 1 8616.720
Fluid distribution manifoldin stainless steelFor the connection of up to 4 Cold Plate units.
Supply includes:2 fluid distributors (inlet and return), screw plugs G1/4˝, G3/8˝, connector sleeves G1/2˝, seals.
Accessories:
Flex hose, see page 184, quick-action vent valve, see page 184, temperature sensor, see page 185.
Packs of Model No. DCP
1 set 8616.750
Direct fluid connectionFor connection of the Cold Plate through the rear or side panel of the enclosure.
Supply includes:2 connector sleeves G1/2˝, 2 Mini stop valves G1/2˝, 2 reducers G1/2˝ – G1/4˝, seals.
Accessories:
Flex hose, see page 184, double-nipple coupling, see page 185.
Packs of Model No. DCP
1 set 8616.751
Flexible hoseFor connection of the Cold Plate to a fluid distribu-tion manifold or direct fluid connection.
Supply includes:2 flexible hoses G1/4˝ with stainless steel braid, seals.
Accessories:
Elbow coupling, see page 185
Packs of Length mm Model No. DCP
1 set 500 8616.760
1 set 1000 8616.761
Quick-action vent valveTo vent the complete Direct Cooling Package system.Easily mounted on the fluid distributor.
Supply includes:Quick-action vent valve G3/8˝, seal.
Packs of Model No. DCP
1 8616.762
System accessories
Sys
tem
acc
esso
ries
Cold Plate
185Rittal System Climate Control
Elbow couplingFor horizontal or vertical connection of the Cold Plate.
Supply includes:4 L-shaped 90° fittings G1/4˝, seals.
Packs of Model No. DCP
1 set 8616.763
Double-nipple couplingFor connection of the flexible hose to the fluid distribution manifold.
Supply includes:4 double-nipple fittings G1/4˝, seals.
Packs of Model No. DCP
1 set 8616.764
Temperature sensor TF25For monitoring the inlet and return temperatures in the fluid distributor.
Supply includes:Temperature sensor TF25 (NTC, 10 kΩ), stainless steel cable gland G1/4˝, seal.
Other versions available on request.
Packs of Model No. DCP
1 8616.765
Sys
tem
acc
esso
ries
System accessories
Liquid Cooling PackageCooling modulefor LCP Standard and SmartWith the cooling module, the useful cooling output may be gradually increased. There is 1 module fitted as standard.
For LCP Cooling output Model No. SK
Standard 6.6 kW 3301.250
Smart 7.0 kW 3301.290
Touchscreen displayfor LCP SmartThe display offers the opportunity of directly monitoring key functions of the LCP Smart, and implementing settings.
Packs of Model No. SK
1 3301.790
Front coverThe optional front cover, together with the built-in filter fleece, ensures even air outlet at the sides as well, and reduces the air outlet speed, thus mini-mising draught effects.
Packs of Model No. SK
1 3301.980
Vertical shielding To block the airflow on the left and right of the 482.6 mm (19˝) level, for enclosure height 2000 mm.
Material:Cellular PU foam, flame-inhibiting to UL 94 (HF1)Length: 1900 mm, self-adhesive on one side.
For sealing between
For enclosure width
mmModel No. SK
Side panel and 482.6 mm (19˝)
level
600 3301.380
800 3301.390
LCP and 482.6 mm (19˝)
level
600 3301.370
800 3301.320
Packs of 1
186 Rittal System Climate Control
System accessories
Sys
tem
acc
esso
ries
Liquid Cooling Package
187Rittal System Climate Control
Horizontal shielding Allows horizontal shielding of the airflow with a partially configured 482.6 mm (19˝) rack.
Material:Sheet steel, spray finished in RAL 7035
For enclosure width
mmPacks of Model No. SK
600 1 3301.330
800 1 3301.340
Coversfor LCP StandardFor sealing any air inlet and outlet openings that are not required.
Material:Sheet steel, spray finished in RAL 7035
Packs of Model No. SK
2 3301.310
Accessories for rack sealing for LCP Standard and LCP PlusTo prevent the ingress of ambient air.
Description Dimensions mm Packs of Model No. Cat. 32, page Side panel, screw fastened H x D 2000 x 1000 2 8100.235 917
Glazed door W x H 600 x 2000 1 8610.600 934 800 x 2000 1 8610.800 934
Sheet steel door, solid W x H 600 x 2000 1 7824.205 936 800 x 2000 1 7824.207 936
Divided roof plate for cable entry W x D600 x 1000 1 7826.6051) 972 800 x 1000 1 7826.8051) 972
1) Retrospective installation is not possible.
System accessoriesS
yste
m a
cces
sori
es
Liquid Cooling Package
188 Rittal System Climate Control
Vent valve For effective cooling of individual LCP modules (SK 3301.250). With quick-release system for simple installation in the water inlet of the LCP, including stop valve.
Packs of Model No. SK
1 3301.400
Connection hose 1 m long, flexible connection hose, may be shortened, including union nuts on both sides for connecting the LCP to existing pipework.
For LCP Thread Model No. SK
SK 3301.230/.420 3/4˝ 3301.350
SK 3301.480 1˝ 3301.351
Packs of 2
Quick-release fastener The shut-off quick-release fasteners on both sides facilitate easy connection and disconnection of the LCP to the existing pipe work (3/4˝ external thread) and connection hose SK 3301.350.
Packs of Model No. SK
1 connector1 coupling 3301.360
Add-on cover For height compensation with 2200 mm high racks in conjunction with the LCP (H = 2000 mm).
Material:Sheet steel, spray finished in RAL 7035
For LCP Model No. SK
SK 3301.210SK 3301.230 3301.221
SK 3301.420SK 3301.480 3301.421
Delivery times available on request.
System accessories
Sys
tem
acc
esso
ries
Filter technology
189Rittal System Climate Control
Filter mats for tangential fans Made of chopped-fibre mat with a progressive structure. Temperature-resistant to 100°C, self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean air side: Closed structure. Reliable filtering of virtually all types of dust from a particle size of 10 μm.
Material:Chemical fibre
For tangential fans/front outlet grilles 2 U W x H x D mm Packs of Model No. SK
SK 3144.000/SK 3145.000/SK 3176.000 425 x 85 x 8 5 3177.000
Filter mats for cooling unitsRittal cooling units are low-maintenance and are supplied without filter mats. Filter mats may be used for extreme conditions.
Material:Open-celled polyurethane foamed plastic with excellent physical and mechanical properties. Temperature-resistant from –40°C to +80°C. Thickness: 10 mm.
For TopTherm cooling units W x H x D mm Packs of Model No. SK
SK 3302.300/SK 3302.310 190 x 95 x 10 3 3286.110
SK 3302. . . ./SK 3303. . . ./SK 3361. . . . 265 x 200 x 10 3 3286.300
SK 3304. . . ./SK 3305. . . ./SK 3328. . . ./SK 3329. . . ./SK 3332. . . ./SK 3366. . . . 344 x 268 x 10 3 3286.400
SK 3273. . . ./SK 3382. . . ./SK 3383. . . ./SK 3384. . . ./ SK 3385. . . ./SK 3359. . . . 530 x 255 x 10 3 3286.500
SK 3386. . . ./SK 3387. . . . 720 x 300 x 10 3 3286.600
SK 3377. . . . 205 x 210 x 10 3 3253.010
For discontinued cooling units W x H x D mm Packs of Model No. SK
SK 3296. . . ./SK 3272.100/SK 3290. . . ./SK 3280.100/ SK 3299. . . ./SK 3261. . . . 539 x 332 x 10 3 3286.100
SK 3265.100/SK 3266.100 270 x 332 x 10 3 3267.100
SK 3256. . . . 395 x 300 x 10 3 3254.000
SK 3293. . . ./SK 3281.100/SK 3298. . . ./SK 3279.100/ SK 3260. . . ./SK 3269. . . ./SK 3262.100/SK 3393. . . ./ SK 3381.100/SK 3391. . . .
334 x 313 x 10 3 3294.100
SK 3255. . . ./SK 3395. . . . 350 x 245 x 10 3 3253.000
SK 3394. . . . 315 x 200 x 10 3 3285.000
SK 3292.134/SK 3278.134 325 x 250 x 10 3 3286.000
System accessoriesS
yste
m a
cces
sori
es
Filter technology
Metal filter Particularly when cooling units are used in dusty and damp environments, it is advisable to use washable metal filters. If air or steam condenses on the metal surfaces, any particles that may be present will adhere to the metal and are easily washed out with water or grease-dissolving detergents.
Material:Aluminium Thickness: 10 mm
For TopTherm cooling units W x H x D mm Packs of Model No. SK
SK 3302.300/SK 3302.310 190 x 95 x 10 1 3286.120
SK 3302.100/SK 3302.110/SK 3303. . . ./SK 3361. . . . 265 x 200 x 10 1 3286.310
SK 3304. . . ./SK 3305. . . ./SK 3328. . . ./SK 3329. . . ./ SK 3332. . . ./SK 3366. . . . 344 x 288 x 10 1 3286.410
SK 3273. . . ./SK 3382. . . ./SK 3383. . . ./SK 3384. . . ./ SK 3385. . . ./SK 3359. . . . 530 x 255 x 10 1 3286.510
SK 3386. . . ./SK 3387. . . . 720 x 300 x 10 1 3286.610
SK 3377. . . . 225 x 200 x 10 1 3253.220
For discontinued cooling units W x H x D mm Packs of Model No. SK
SK 3296. . . ./SK 3272.100/SK 3290. . . ./SK 3280.100 520 x 290 x 10 1 3286.210
SK 3299. . . ./SK 3261. . . . 520 x 315 x 10 1 3286.200
SK 3265.100/SK 3266.100 265 x 320 x 10 1 3267.200
SK 3256. . . . 315 x 365 x 10 1 3254.200
SK 3293. . . ./SK 3281.100/SK 3298. . . ./SK 3279.100/ SK 3260. . . ./SK 3269. . . ./SK 3262.100/SK 3393. . . ./ SK 3381.100/SK 3391. . . .
300 x 328 x 10 1 3294.200
SK 3255. . . ./SK 3395. . . . 348 x 210 x 10 1 3253.200
SK 3394. . . . 375 x 415 x 10 1 3285.200
For TopTherm climate control door/section door W x H x D mm Packs of Model No. SK
SK 3300.040/SK 3300.050/SK 3300.060/SK 3300.070/SK 3300.080/SK 3300.090/SK 3300.110/SK 3300.120 425 x 78 x 10 1 3284.210
For discontinued climate control doors W x H x D mm Packs of Model No. SK
SK 3306. . . ./SK 3307. . . ./SK 3309. . . ./SK 3310. . . . 424 x 100 x 10 1 3284.200
SK 3308. . . . 624 x 100 x 10 1 3288.200
For discontinued climate control side panel W x H x D mm Packs of Model No. SK
SK 3331. . . . 380 x 150 x 10 1 3289.200
For heat exchangers W x H x D mm Packs of Model No. SK
SK 3126.4XX 130 x 130 x 10 1 3286.230
SK 3128.4XX/SK 3129.4XX 208 x 208 x 10 1 3286.240
SK 3130.4XX 225 x 225 x 10 1 3286.250
For Mini recooling systems W x H x D mm Packs of Model No. SK
SK 3318.600/SK 3318.610/SK 3319.600/SK 3319.610 530 x 255 x 10 1 3286.510
SK 3320.600/SK 3334.600 500 x 558 x 8 1 3286.520
SK 3360. . . . 344 x 268 x 10 1 3286.410
190 Rittal System Climate Control
System accessories
Sys
tem
acc
esso
ries
Filter technology
191Rittal System Climate Control
Lint screen Especially for the use of cooling units and air/air heat exchangers where there is a high proportion of lint in the ambient air.
Material:Stainless steel mesh
For Packs of Model No. SK
SK 3304. . . ./SK 3305. . . ./SK 3328. . . ./SK 3329. . . ./SK 3332. . . ./SK 3360. . . ./SK 3126. . . ./SK 3127. . . ./SK 3128. . . ./SK 3129. . . ./SK 3130. . . .
1 3329.904
Delivery times available on request.
Louvred grille for lint screen Material:ABS
For Packs of Model No. SK
SK 3329.904 1 3329.903
Delivery times available on request.
Spare filter mats Made of chopped-fibre mat with a progressive structure. Temperature-resistant to 100°C, self-extinguish-ing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean air side: Closed structure. Reliable filtering of virtually all types of dust from a particle size of 10 μm.
Material:Chemical fibre
For thermoelectric coolers W x H x D mm Packs of Model No. SK
SK 3201.200/SK 3201.300 106 x 90 x 8 5 3201.050
For fan-and-filter units/outlet filters W x H x D mm Packs of Model No. SK
SK 3321. . . . 89 x 89 x 10 5 3321.700
SK 3322. . . . 120 x 120 x 12 5 3322.700
SK 3323. . . . 173 x 173 x 17 5 3171.100
SK 3324. . . ./SK 3325. . . . 221 x 221 x 17 5 3172.100
SK 3326. . . . 289 x 289 x 17 5 3173.100
SK 3327. . . . 286 x 286 x 10 5 3327.700
For filter holders W x H x D mm Packs of Model No. SK
SK 3175.000 338 x 242 x 20 3 3174.000
Fine filter mats for fan-and-filter units Made of chopped-fibre mat with a progressive structure. Temperature-resistant to 100°C, self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean air side: Closed structure. Reliable filtering of virtually all types of dust from a particle size of 10 μm.
Material:Chemical fibre
For fan-and-filter units/outlet filters W x H x D mm Packs of Model No. SK
SK 3323. . . . 173 x 173 x 12 5 3181.100
SK 3324. . . ./SK 3325. . . . 221 x 221 x 12 5 3182.100
SK 3326. . . ./SK 3327. . . . 289 x 289 x 12 5 3183.100
System accessories
192
Sys
tem
acc
esso
ries
General
Wide-range power pack 24 V (DC) for thermoelectric cooler
To supply voltage to the thermoelectric cooler with primary 96 – 264 V (AC) voltage supply input. Power packs for other outputs available on request.
Power pack 24 V (DC) for SK 3201.300 Model No. SK
150 W for snap-mounting onto top-hat rail 35 mm 3201.030
Electric condensate evaporatorFor external mounting on enclosures. For use with all enclosure cooling units and air/water heat exchangers. Evaporation performance: 1) 2.4 l/d 2) 4.2 l/d
Colour:RAL 7035
Supply includes:Electric condensate evaporator, ready to connect.
Detailed drawing, see page 268.
Rated operating voltage
Model No. SK
for SK 3302/SK 3303
for 400 mm wide cooling units
230 V, 50/60 Hz 3301.5601) 3301.5702)
115 V, 50/60 Hz 3301.5801) 3301.5902)
Condensate collecting bottleFor mounting on the enclosure. For use with all enclosure cooling units and air/water heat exchangers. Safety overflow at the side. Capacity approximately 0.75 l.
Condensate discharge tube
Membrane grommet
Max. 70 mm
Supply includes:Condensate collecting bottle, bottle holder including assembly parts.
12
3
Ø 73
239
66
1
2
3
Packs of Model No. SK
1 3301.600
Condensate hoseFor removing and forwarding condensate. For connecting to enclosure cooling units.
Material:PVC, transparent
Supply includes:10 m hose.
For devicesMaterial
thickness Ø
Model No. SK
SK 3302. . . ./SK 3201. . . . 8 x 1.5 mm 3301.608
SK 3303. . . ./SK 3361. . . . 10 x 1.5 mm 3301.610
SK 3273. . . ./SK 3304. . . ./SK 3305. . . ./SK 3328. . . ./SK 3329. . . ./SK 3332. . . ./SK 3359. . . ./SK 3366. . . ./SK 3377. . . ./SK 3382. . . ./SK 3383. . . ./SK 3384. . . ./SK 3385. . . ./SK 3386. . . ./SK 3387. . . .
12 x 2 mm 3301.612
Rittal System Climate Control
System accessories
Sys
tem
acc
esso
ries
General
193Rittal System Climate Control
Outlet filtersFor ventilation by convection, an outlet filter can be installed in the upper and lower sections of the enclosure.
Material:ABS, material resistance to UL 94-V0.
Colour:RAL 7035
Supply includes:Outlet filter including filter mat.
Note:EMC version, see page 48.
Accessories:
Spare filter mats, see page 191. Fine filter mats, see page 191.
Dimensions in mm Model No. SK
116.5 x 22 3321.207
148.5 x 24.5 3322.207
204 x 30 3323.207
255 x 30 3325.207
323 x 30 3326.207
For RAL 7032, use order extension .200.
Hose-proof hoodsfor fan-and-filter units/outlet filtersWhen the hose-proof hood is mounted above the fan-and-filter unit and outlet filter in conjunction with a fine filter mat, a protection category of IP 56 to EN 60 529 is achieved.
Material:Stainless steel
Protection category:In conjunction with the fan-and-filter units/outlet filters, NEMA 3R + 12 is met.
For Dimensions in mm
Model No. SK
SK 3321. . . . 150 x 260 x 40 3321.8001)
SK 3322. . . . 176 x 270 x 55 3322.800
SK 3323. . . . 233 x 410 x 55 3323.800
SK 3324. . . . SK 3325. . . . 282 x 500 x 85 3324.800
SK 3326. . . . SK 3327. . . . 350 x 560 x 110 3326.800
1) Delivery times available on request.
Front outlet grille 2 Ufor tangential fans This front outlet grille is required if a 482.6 mm (19˝) cross-flow blower (SK 3144.000/SK 3145.000) is used in the lower section of the electronic enclosure and the hot air is to be expelled to the outside from the upper section of the enclosure. The design of the grille matches that of the intake grille in the cross-flow blower. These grilles can also be used as simple inflow and outflow grilles with natural convection.
Accessories:
Filter mat, see page 189.
Packs of Model No. SK
1 3176.000
System accessoriesS
yste
m a
cces
sori
es
General
194 Rittal System Climate Control
Filter holderfor roof ventilationThe use of a filter mat is required in order to increase the protection category of the roof vent (SK 3148.007). Protection category IP 44 to EN 60 529 is achieved.
Material:Sheet steel
Supply includes:Filter holder including filter mat.
Accessories:
Spare filter mat, see page 191.
W x H x D mm Model No. SK
340 x 244 x 15 3175.000
Overflow valvePressostat for use in the water cycle between the recooling system and the air/water heat exchanger. It prevents an increase in pump pres-sure in the recooling system against the closed magnetic valve of the air/water heat exchanger outside of the cooling cycle.
Material:Brass
Setting range: 2 – 12 bar
Presetting: 3 bar
Version Packs of Model No. SK1/2˝ bypass valve 1 3301.9003/4˝ bypass valve 1 3301.910
1˝ bypass valve 1 3301.920
Flow regulator valveFor use with air/water heat exchangers, espe-cially if more than one heat exchanger (n > 1) is used in the water cooling circuit. The correctly set valve then ensures the same quantity of cooling medium for all equipment. The valve is used for hydraulic balancing.
Material:Brass
Setting range: 3 – 12 l/min
Version Packs of Model No. SK3/4˝ x 1/2˝
for volumetric flow control 1 3301.930
3/4˝ x 3/4˝for volumetric flow control 1 3301.940
Cooling medium for recooling systemsReady mixApart from the recooling systems for oil and emul-sion, all other recooling systems are only suitable for the cooling of water or a water/glycol mixture.
As well as protecting against frost, this cooling medium also serves to inhibit bacterial growth and provide optimum corrosion protection.
Supply includes:10 l canister, 25 l canister or 200 l barrel.
Rifrost Antifreeze/water mixture Container Model No. SK
Outdoor 1 : 210 l 3301.950
25 l 3301.955
200 l 3301.9571)
Standard 1 : 410 l 3301.960
25 l 3301.965
200 l 3301.9671) 1) Delivery times available on request.
Rittal System Climate Control
System accessories
Sys
tem
acc
esso
ries
Software service
Therm SoftwareRittal Therm is a calculation program for enclosure climate control. All electrical and electronic components have a certain power loss which is dissipated to the envi-ronment in the form of heat. Because an increas-ing number of components are now being housed in ever smaller spaces, the heat produced can soon reach levels which are harmful to electronic components and may severely curtail their useful lives. The Therm software package takes care of the complex calculation of climate control require-ments. A user-friendly interface guides the opera-tor to the most suitable, correctly dimensioned climate control component. All evaluations are closely based on the require-ments of IEC/TR 60 890 AMD 1/02.95 and DIN 3168 for enclosure cooling units.
Supply includes
CD-ROMLanguages: Available in 13 languages Model No. SK 3121.000
Note:Your free 30-day trial version may be downloaded at www.rittal.com
EPLAN CabinetBoost your productivity at every stage, from electrical planning, to enclosure population, through to production
The electrical planning and mechanical installa-tion of an enclosure are combined into an inte-grated workflow with EPLAN Cabinet.
Equipment and component data is transferred from the wiring schematic in EPLAN Electric P8 or earlier versions of EPLAN into the layout plan. Rittal enclosures are integrated as original 3D models via component libraries (Rittal RiCAD-3D). Cable trunking, support rails, terminals and devices may be positioned in the 3D representa-tion of the enclosure at a click of the mouse. Colli-sion controls ensure compliance with distances and blocked surfaces, and help to avoid design errors.
Automatic generation of bills of materials and order lists are, of course, included, as are high-quality, dimensioned drawings for plant documen-tation.
Supplementary modules such as routing or NC generate drilling plans and programs, optimised wiring paths and lists, as well as information for drilling and milling machines. The simple plan-ning and detailed documentation of EPLAN Cabinet support an optimum workflow, from the wiring schematic through to the populated enclosure.
EPLAN Cabinet is available from: www.eplan.com
RiDiag IIRiDiag II is a tool for diagnosing the operating behaviour of Comfort controller-regulated cooling units. By connecting a PC, it is possible to retrieve error messages, temperatures and capacity utili-sation levels of the cooling units which are stored in the Comfort controller. The system includes integrated temperature measurement from four sensors in the cooling unit, and also features graphical representation of the temperature development over time.
Supply includes
CD-ROMLanguage: German/English/Italian/FrenchConnection cableModel No. SK 3159.100
195
196
Tips and tricks
Cooling with ambient air from page 198Fan-and-filter units Applications/selection criteria ........................................................198Assembly ........................................................................................200Rack-mounted fans/tangential fans – Applications .......................201
Air/air heat exchangers Applications ....................................................................................202Selection criteria .............................................................................203Assembly ........................................................................................204Air routing .......................................................................................205Electrical connection and control ..................................................206
Cooling units from page 207Applications ....................................................................................207Selection criteria .............................................................................208Assembly ........................................................................................209Air routing........................................................................................210
Condensation management ...........................................................213Electrical connection and control ..................................................215Thermoelectric cooler – Mounting options .....................................216
Liquid cooling IE from page 217Air/water heat exchangers Applications ....................................................................................217Selection criteria .............................................................................218Assembly ........................................................................................219Air routing........................................................................................220Condensation management............................................................222Electrical connection and control ..................................................224
Recooling systems/chillers Applications ....................................................................................226Selection criteria ............................................................................227Assembly ........................................................................................228Notes...............................................................................................229
rick
s
Liquid cooling IT from page 230Aisle containment Benefits ...........................................................................................230Usage..............................................................................................231Application examples ....................................................................232
Liquid Cooling Package Plus, Smart, Extend.........................................................................233
Tip
s an
d t
Enclosure heaters from page 234Applications/assembly/electrical connection ................................234
Monitoring from page 235Master/slave mode..........................................................................235Interface card..................................................................................235
CMC-TC enclosure monitoring system...........................................237
197Rittal System Climate Control
Coo
ling
with
am
bien
t air
Cooling with ambieFan-and-filter units – Applica
nt airtions/selection critiera
Fan-and-filter units utilise the ambient air for direct
cooling of the enclosure interior.
This requires cool, reasonably clean ambient air.
Ambient conditions
Cool
198 Rittal System Climate Control
Fan-and-filter units are ideal for dissipating heat loads cost-effectively. The prerequisite is that the ambient air must be relatively clean with a temperature below the desired enclosure internal temperature. A temperature difference of 10 K is ideal.
Application diversity and designIn most cases, it makes sense to install the axial fan with the air directed from outside into the enclosure so that over-pressure is created inside the enclos-ure, as per the delivered state. This helps to avoid the ingress of unfiltered ambient air.
Advantage: Aesthetics and functionThe extremely low build height is typical of the Rittal fan-and-filter unit design. The super-slimline vent grille guarantees optimum air throughput with low noise generation.
Air directionDirection of airflow “blowing into the enclosure”. Standard arrangement of fan and outlet filter. In this case, a mini-mal overpressure is generated inside the enclosure. The incoming air is routed completely via the filter mat.
Direction of airflow “extracting from the enclosure”. Configuration after changing the airflow direction of the fan-and-filter motor. In such cases, unfiltered “bad air” may be drawn in via leaks in the enclosure.
180°
1
2
3
Dismantling
Direction of airflow in the supplied state/standard
Direction of airflow after rotating the fan motor
1
2
3
1
2
2
1
Fan-and-filter unit
Outlet filter
1
2
Rittal System Climate Control
Cooling with ambient air
Coo
ling
with
am
bien
t air
Fan-and-filter units – Applications/selection critiera
Small enclosure
Command panel
Console
Bayed enclosure/large enclosures
PC enclosure
1
2
3
4
5
Practical example of a fan-and-filter unit Fan-and-filter units are used in virtually all segments of indus-try: from the smallest enclosures, to command panels and consoles, through to large and bayed enclosure systems. They are the easiest method of protecting against overheat-ing and hot-spots.
The basic prerequisite for their use is that the ambient tem-perature must be significantly lower than the enclosure inter-nal temperature.
A wide range of control units such as thermostat, hygrostat and speed control for noise minimisation extend the applica-tion range to other areas, such as the office sector and labo-ratories.
EMC fans meet the requirements for increased RF shielding. Particularly when using fan-and-filter units in conjunction with PC enclosures or monitor panels, DC variants are used which provide effective protection from interference.
5
5
4
2
3 1
Sealed and shieldedAlso available with EMC shieldingAll fan-and-filter units and outlet filters are alternatively available with EMC shield-ing. The required conduc-tive connection is achieved via a metallic coating on the fan-and-filter unit housing and a special sealing frame.
Protection functionsThe membranes of the fan grille in the form of a rain canopy provide exceptional protection against the ingress of splashed water and dust.Protection category IP 54 is achieved as standard.
Hosed water protectionParticularly for applications in the food industry, the hose-proof hood prevents the ingress of damp. The protection category IP 55 is achieved in conjunction with additional fine filter mats.
Important● The prescribed heat loss
and the maximum antici-pated ambient tempera-ture define the required volumetric flow.
● Always use the fan-and-filter units and outlet filters together.
Calculation formulae, see page 34 or refer to the Internet at www.rittal.com
199
Cooling with ambieC
oolin
g w
ith a
mbi
ent a
ir
nt air
Fan-and-filter units – Assembly200 Rittal System Climate Control
Benefits of Rittal fan-and-filter units and outlet filters● All-round foamed-in seal as standard to achieve a protec-
tion category of IP 54● Additional mounting catches for fast, screwless assembly,
to ensure secure attachment to the enclosure ● A new unlatching system for removal of the louvred grille
Super-simple assembly without screws.
Benefits:● Air throughput from 20 to 700 m3/h● Super-fast assembly ● Air flow direction may be reversed from blowing (default
setting) to extracting● All fans also available with EMC shielding
Louvred grill lock system● Can only be opened with tools● Achieves a protection category of IP 55 with types
SK 3323 . . . . to SK 3327. . . .
IP 55 with standard mat (A)plus additional micro-filter mat (B)Not applicable to SK 3321.... and SK 3322....
y
1
2
3
45
6
(A)
(B)
y
2
1
Rittal System Climate Control
Cooling with ambient air
Coo
ling
with
am
bien
t air
Rack-mounted fans/tangential fans – Applications
Rack-mounted fan● Air throughput 320/480 m3/h, 1 U.● Direct ventilation of the subracks prevents hot-spots and
heat accumulation. ● The fan units (24 V DC, 115 – 230 V AC) are also available
with integral speed control and fault evaluation.Mounting directly on the 482.6 mm (19˝) level
Rack-mounted Vario fan with guide frame ● The rack-mounted fan slides like a drawer.● Connectors on the rear ensure immediate contact.
Installation directly in the subrack
Installation via two mounting brackets on the 482.6 mm (19˝) mounting level
1
2
3
1
2
3
Tangential fan● 320 m3/h air throughput, 2 U.● The high air throughput means that Rittal tangential fans
are capable of dissipating large heat losses from the enclosure.
● The ambient air is drawn in via the front grille and con-veyed upwards.
● The minimal noise generation of 52 dB creates a pleasant working environment.
201
Coo
ling
with
am
bien
t air
Cooling with ambient aAir/air heat exchangers – Applicatio
irns
Air/air heat exchangers use the external temperature
for cooling. By separating the internal and external air
circuits, the ingress of dust into the enclosure is
prevented.
Ambient conditions
Cool Dust
202 Rittal System Climate Control
Outstanding performance and designThe requirement for use of air/air heat exchangers is that the ambient temperature must be below the desired enclosure internal temperature.Dust and aggressive ambient air are unable to enter the enclosure interior, thanks to the two separate air circuits.
In all situations where the ambient air is sufficient for cooling, air/air heat exchangers offer effective, energy-saving solu-tions. The high specific thermal output is attributable to the special construction and functional design of the heat exchangers:
● A large heat exchanger area with compact dimensions● Exceptionally conductive materials and connections● Fans that may be controlled separately● Optimum flow conditions
Wood-processing industry
Air/air heat exchangers (wall-mounted)
1
2
Practical example of an air/air heat exchangerIn the paper and wood-processing industries, for example, particular requirements are placed on climate control compo-nents. They ensure good internal ventilation and heat dissi-pation from the enclosure. At the same time, they also pre-vent the ingress of super-fine dusts.
Air/air heat exchangers are ideal for this purpose, since they effectively dissipate the heat from the enclosure with their two hermetically separate air circuits based on the reverse cur-rent or counter-current principle, and prevent the ingress of ambient air into the enclosure.
1
2
2
Rittal System Climate Control
Cooling with ambient air
Coo
ling
with
am
bien
t air
Air/air heat exchangers – Selection criteria
Cool ambient airAir/air heat exchangers utilise the ambient air to cool the air in the enclosure interior. Based on the counterflow principle, the completely separate airflows are routed through the heat exchanger module by powerful fans.
● Ambient conditions: The ambient temperature Tu must be lower than the permissible enclosure interior temperature. A temperature difference of 10 K is ideal.
● Also ideal for use in dusty ambient conditions.
Flow and siting conditionsInternal/external mountingAir/air heat exchangers may optionally be mounted on the outside or inside of the enclosure. The slimline design facili-tates external mounting on the door, rear panel and side panels.
By diverting the waste air upwards, this prevents the crea-tion of disruptive air flows in front of the enclosures.
The fans in the internal and external circuit may be activated separately via an intelligent controller and thus adapted ideally to the ambient conditions.
External mounting
Internal mounting
1 2
1
2
203
Cooling with ambient airC
oolin
g w
ith a
mbi
ent a
ir
Air/air heat exchangers – Assembly
204 Rittal System Climate Control
Sealing of the enclosureThe enclosure must be sealed on all sides (IP 54). Particular attention should be paid to the sealing of the area around the cable entry openings and above all, the floor section of the enclosure.
Additionally, the door seal must be in perfect condition.
The sealing material included with the heat exchangers must be applied in accordance with the installation instructions.
Take care not to bend the side panel or enclosure door.
External circuit Flow and siting conditionsAir/air heat exchangers in the external circuit should have a distance of at least 200 mm from a wall and from one another (air inlet and outlet openings). If this distance cannot be met, air baffle plates should be used.
Siting optionsWall-mounted heat exchangers may be mounted on the rear panel, side panels or door of the enclosure.
Distance from the wallat least 200 mm
C
Rittal System Climate Control
ooling with ambient air
Coo
ling
with
am
bien
t air
Air/air heat exchangers – Air routing
Free air circulationIt is important to ensure “even” air circulation inside the enclosure. Air inlet and outlet openings in the internal circuit must on no account be obstructed by electrical installations. This would prevent air from circulating inside the enclosure. Under such conditions, the capacity of the device would not be adequately utilised. A clearance of > 200 mm must be guaranteed.
Note:Wall-mounted cooling units should never be fitted directly behind the mounting plate. Active power components are located on the front of the mounting plates. The heat exchanger would then operate in its own air short-circuit.
If it is impossible to install the device any other way, appropri-ate air baffle plates should be used, and air inlet and outlet openings should be provided in the mounting plate.
200
Internal circuit – Wall-mounted unitsAttention should be paid to components and electronic com-ponents equipped with their own ventilation systems, such as blowers and axial fans. If their air flow is directed against the chilled air flow of the heat exchanger, this could cause an air short-circuit and adequate climate control would no longer be guaranteed.
Note: Never direct the chilled air flow at active components.
205
Cooling with ambie
206
Coo
ling
with
am
bien
t air
nt air
Air/air heat exchanger – Electrical connection and controlSimple control with digital temperature display● Specific thermal output from 17.5 to 90 W/K● With controller and digital temperature display● Floating fault signal contact in case of overtemperature● System analysis via display
Supply connection● The mains connection parameters (voltage and frequency)
specified on the rating plate must be observed.● The pre-fuse specified on the rating plate must be used.
Rated voltage 230 V, 50/60 HzRated current 0.6 A/0.8 ARated consumption 140 W/180 WPre-fuse T 2 ASpecific cooling output 45 W/K
CablingSignal data cable
Control cable
Motor cable
The power cable, power supply unit cable, signal cable and data cable must be laid separately; cable lengths should be kept as short as possible. Avoid coupled sections.
1
2
3
1231
2
3
Rittal System Climate Control
Applications
Cooling units
Cooling units keep the enclosure internal temperature
at a constant level, even to below room temperature.
The air routing meets individual requirements. Two
separate circuits prevent the ingress of dust into the
enclosure.
Ambient conditions
Heat Dust
Co
olin
g u
nit
s
207Rittal System Climate Control
● Climate controlled enclosures ● Roof-mounted cooling units ● Wall-mounted cooling units ● Thermoelectric cooler
Integral cooling system/climate controlled enclosuresThe combination of enclosure and cooling components achieves particularly effective cooling. Assembly time is eliminated. The investment costs for the complete unit offer exceptional value for money.
Roof-mounted cooling unitsRequirement-oriented routing of cooling air in the internal circuit is possible, with up to four cold air outlet openings and the optional use of ducts. In the external circuit, the heated air is expelled to the rear, left and right, and option-ally upwards. This means that the enclosure may be sited in a bayed suite or close to the wall.
Wall-mounted cooling unitsDepending on the space and design requirements, internal mounting, partial internal mounting and external mounting are all possible. Thanks to large distances between the air intake and outlet openings, effective cold air throughput of the enclosure is achieved.
Cooling unitsC
oo
ling
un
its
Selection criteria
208 Rittal System Climate Control
Enclosure climate control poses escalating demands on inte-gration and adaptation to the local conditions and the exist-ing process control and monitoring system. Rittal offers the right solution to suit every requirement.
When selecting the appropriate cooling unit for your enclosure, please observe the following points:
● What is the installation type to IEC 890?(see page 34, calculation bases)
● What ambient conditions are anticipated (max. ambient temperature and humidity)?
● What is the required maximum internal temperature of the enclosure (Ti)?
● What is the heat loss from electronic components inside the enclosure?
● Is there a requirement regarding the protection category to EN 60 529/IEC 529?
● What type of ambient pollution, such as dust, oil and chemicals, are the cooling units exposed to?
● For bayed enclosure suites, the output irradiated from neighbouring units may also need to be taken into account.
● Good ventilation should be ensured at the site of installa-tion (for example, the heat dissipated by the cooling unit may cause a significant rise in the temperature of small rooms).
● Particularly with poor ambient conditions, such as dirt or small, unvented rooms, air/water heat exchangers should be used.
Proper use of enclosure cooling unitsIn order to ensure the proper use of enclosure cooling units, the following points should be observed:
1. The unit must only be installed and opened by authorised, expertly trained personnel.
2. Choose a location for the cooling unit which ensures excellent ventilation. The site must be free from excessive contamination and moisture. For example, the atmosphere must not contain any conductive dusts or corrosive media.
3. The mains connection data (connection voltage and frequency) specified on the rating plate must be observed. In the case of 400 V, 2~ cooling units, we recommend the use of transformer circuit-breakers, and for three-phase units, the use of motor circuit-breakers is advisable.
4. The prescribed electrical protection devices must be con-nected upstream of the unit. No additional temperature control must be connected upstream of the device at the supply end. The pre-fuse specified on the rating plate should be provided as line protection. Observe the locally valid regulations when installing.
5. Where a door contact switch is used, a shielded cable should be used in environments with increased levels of electro-magnetic interference.
6. The temperature range specified on the rating plate must be observed when operating the cooling unit, both indoors and outdoors.
7. The enclosure must be sealed on all sides (IP 54).
8. The air inlet and outlet openings in the internal circuit of the cooling unit must not be obstructed.
9. The cold air flow should not be directed straight at electronic components, to prevent the formation of condensation.
10. The unit must only be installed horizontally, in accordance with the prescribed installation position. The maximum permissible deviation from the horizontal is 2°.
11. After disconnecting from the supply voltage, the cooling circuit of the cooling unit must not be switched back on for at least 5 minutes.
12. The customer must not make any modifications to the cooling unit.
13. The heat loss of the components installed in the enclosure must not exceed the specific useful cooling output of the cooling unit.
14. The installation instructions contained in the cooling unit manual must be observed in full.
Important
Cooling units
Co
olin
g u
nit
s
Assembly
209Rittal System Climate Control
Sealing of the enclosureThe enclosure must be sealed on all sides (IP 54). Particular attention should be paid to the sealing of the area around the cable entry openings and above all, the floor section of the enclosure.
Additionally, the door seal must be in perfect condition.
The sealing material included with the cooling units must be applied in accordance with the installation instructions.
Take care not to bend the side panel or enclosure door.
Installation on enclosuresThe cooling unit must be correctly installed.
The roof plate of the enclosure must not be allowed to give under the weight of the cooling unit.
If necessary, additional stays should be used. Do not obstruct the air inlets and outlets of the internal circuit.
Note:For TopTherm-Plus roof-mounted units, TS 8 roof plates pre-pared with mounting cut-outs and reinforcement strips for all standard enclosure sizes are available as an accessory (see page 181).
When installing after the unit has been assembled, the twin-threaded bolts supplied loose should be screwed into the core holes in the plastic base on the underside of the device, with a maximum torque of 3 Nm.
Cooling unitsC
oo
ling
un
its
Air routing
210 Rittal System Climate Control
External circuit Flow and siting conditionsIn the outer circuit, enclosure cooling units should be spaced > 200 mm from the wall and/or from each other (air inlet and outlet openings). In order to ensure adequate air circulation, at least one air outlet opening must be kept free. If this clearance cannot be maintained, air baffle plates will need to be used.
The external circuit supports all siting variants.Thanks to their compact dimensions and external air routing design, roof-mounted cooling units may even be installed in low-height rooms and with bayed enclosure suites.Air intake is always from the front. The air is expelled at the sides and rear. An outlet to the top is also possible as an option. In other words, regardless of which siting mode is chosen, one air outlet must always be kept free.
Siting optionsThere are no restrictions here. Only the air intake and exhaust area in front of the cooling unit must be kept free. Wall-mounted cooling units may be mounted on the rear panel, side panels or door of the enclosure.
Distance from the wallat least 200 mm
Internal circuit – Wall-mounted unitsFlow conditions Attention should be paid to components/electronic compo-nents equipped with their own ventilation systems, such as blowers and axial fans. If their air flow is directed against the chilled air flow of the cooling unit, this could cause an air short-circuit. In the worst case, the internal safety valves of the cooling unit would discontinue cooling operation.
Note:Never direct the chilled air flow at active components.
Accessories:Air diverter, see page 176.
Cooling units
Co
olin
g u
nit
s
Air routing
211Rittal System Climate Control
Free air circulationIt is important to ensure “even” air circulation inside the enclosure. Air inlet and outlet openings in the internal circuit must on no account be obstructed by electrical installations. This would prevent air from circulating inside the enclosure. Under such conditions, the cooling capacity of the device would not be adequately utilised. A clearance of > 200 mm must be guaranteed.
Note:Wall-mounted cooling units should never be fitted directly behind the mounting plate. Active power components are located on the front of the mounting plates. The cooling unit would then be left to operate in its own air short-circuit.
If it is impossible to install the device any other way, appropri-ate air baffle plates should be used, and air inlet and outlet openings should be provided in the mounting plate.
Accessories:Air diverter, see page 176.
200
Air diverter systems for wall-mounted unitsSee page 176.
For use in climate control side panels and TopTherm-Plus wall-mounted cooling units. For targeted air routing of the cold air in a downward direction. Particularly well-suited for densely-packed electrical components in the lower section of the enclosure.
Internal circuit – Roof-mounted unitsFlow conditionsWhen using roof-mounted units, particular attention should be paid to the air flow from the blowers of built-in electronic components (such as frequency converters and other drive units).
Cooling unitsC
oo
ling
un
its
Air routing
Air duct systemfor TopTherm-Plus roof-mounted cooling units It is possible to route the cold air directly to specific areas of the enclosure using the air duct system. The risk of “short circuits” in the air circulation due to self-ventilated installed devices is therefore eliminated.
Note:● Never direct the cold air flow straight at active compo-
nents.● Route the air duct system directly downwards with no
bends.● Cold air must be able to escape unobstructed at the end of
the duct.● Additional deflections will reduce the useful cooling output.● When using the ducting system, the performance of the
cooling unit may be reduced, depending on the respec-tive application.
● The air duct system should not be extended. CAUTION Risk of icing!
1
Accessories:Air duct system for roof-mounted units,see page 174.
1
Stoppers for TopTherm-Plus roof-mounted cooling units For sealing any cold air outlets that are not required.
Note:At least two outlet openings must always remain open!
Please note that if two or three openings are closed, the cool-ing output may be reduced by 20 % and 30 % respectively!
SK 3286.880 for units
SK 3286.780 for units
SK 3286.980 for units
SK 3383.xxxSK 3384.xxxSK 3385.xxx
SK 3273.xxxSK 3209.xxxSK 3210.xxx
SK 3382.xxxSK 3359.xxx
SK 3386.xxxSK 3387.xxx
max. 2x
max. 1x
212 Rittal System Climate Control
Cooling units
Co
olin
g u
nit
s
Condensation management
213Rittal System Climate Control
Condensate routing (roof-mounted units)Any condensation which forms on the evaporator coil (with high humidity and low enclosure interior temperatures) is routed to the right and/or downwards out of the device via a drain in the evaporator tray. For this purpose, a piece of hose should be connected to one of the two condensate nozzles (1 or 2). The drain which is not required should be tightly sealed. The condensate must be able to run off freely. If the condensate is to be drained off over a greater distance, then care must be taken to ensure that the hose is free from kinks and checked for correct drainage. Units with a Comfort controller are additionally equipped with a condensate alarm.
Condensate discharge rear
Condensate discharge right
Note:Condensate discharge (wall-mounted units)For wall-mounted units, a hose should be connected to the condensate nozzle on the bottom of the unit.
The condensate drain pipe should be laid with a gradient, taking care to ensure there are no kinks in the pipe!
y
1 2
y
21
1
2
Condensate dischargeIf the condensate discharge is extended, its cross-section must not be reduced.
Accessories:PVC condensate hose
Condensate hose For unit(s)
SK 3301.608 (8 x 1.5) SK 3302.xxxSK 3301.610 (10 x 1.5) SK 3303.xxx/SK 3361.xxx
SK 3301.612 (12 x 2)SK 3304.xxx/SK 3305.xxxSK 3328.xxx/SK 3329.xxxSK 3332.xxx/SK 3382.xxxSK 3359.xxx/SK 3383.xxxSK 3384.xxx/SK 3385.xxxSK 3386.xxx/SK 3387.xxxSK 3366.xxx/SK 3377.xxxSK 3209.xxx/SK 3210.xxxSK 3273.xxx
Cooling unitsC
oo
ling
un
its
Condensation management
214 Rittal System Climate Control
Condensate evaporation, electricalintegrated into TopTherm-Plus cooling unitsCondensate arising inside the enclosure or on the evapora-tor coil of the cooling unit is effectively evaporated. The evap-orator device inside the cooling units has a very high evapo-ration output (several litres per day). This is achieved thanks to the principle of direct evaporation. Important note: The enclosure must be sealed on all sides.
Energy-efficient: Activation of the evaporator device is via a separate heater cartridge. “Condensate evaporation” based on the hot gas bypass principle is too ineffective, due to inadequate evaporation temperatures.
Advantage: ● Safe use: No condensate drips onto the factory floor
(no puddles/no risks of slipping/accidents).● No need to empty the condensate collecting receptacles.● No time-consuming laying of condensate hoses required.
Rittalinnovation
The internal and external units are active “direct evaporator coils”, which actively evaporate the condensate incurred.
Advantage: ● No collecting vessel required● No long hosepipes
Note: For roof and wall-mounted units, either external evaporator units or integral condensate evaporators may be used.
TopTherm-Plus cooling units are available with integrated electronic condensate evaporation and external evaporator units for retro-fitting.
Filter matsIn dusty environments, we recommend the use of filter mats to make it easier to clean the cooling unit. The filter should be changed at regular intervals, depending on the level of contamination.
If the air is oil-contaminated, it is better to use metal filter mats which may be cleaned with appropriate detergents and reused.
Cooling units
Co
olin
g u
nit
s
Electrical connection and control
215Rittal System Climate Control
Supply connection● Supply connection data (voltage and frequency) must be
observed in accordance with the rating plate.● The pre-fuse specified on the rating plate must be used.
Voltage range 400 V/460 VFrequency range 50 Hz/60 Hz
400 V/50 Hz 3~ 400 V/60 Hz 3~Rated current 2.5 A 3.0 AStart-up current 6.5 A 7.5 AMotor circuit-breaker 10 A 10 A
Rated consumption L 35 L 35 L 35 L 50
930 W1150 W
1150 W1400 W
Useful cooling output L 35 L 35 L 35 L 50
2000 W1450 W
2350 W1690 W
Coolant/filled weight R 134a, 950 g (34 oz), Fluid Group 2
Use of door-operated switchesOne floating door-operated contact should be used for each unit; under no circumstances must several cooling units be operated via one door-operated switch.
In environments with increased electromagnetic inter-ference, a shielded cable should be used. Alternatively, the door contact may be switched e.g. via an additional relay in the vicinity of the cooling unit.
Note:The cables should be laid separately from the mains cables; short cable distances should be observed.
CablingSignal data cable
Control cable
Motor cable
The power cable, power supply unit cable, signal cable and data cable must be laid separately; cable lengths should be kept as short as possible. Avoid coupled sections.
1
2
3
1231
2
3
Co
olin
g u
nit
s
Cooling units
Electrical connection and control/Thermoelectric Cooler – Mounting options216 Rittal System Climate Control
Intelligent controlThe two controller variants for operational reliability offer a comprehensive range of functions. Essential control elec-tronics are well protected and cooled in the inner circuit.
Both variants have the following properties: ● Three voltage options: 115 V, 230 V, 400/460 V 3 ̃ ● Integral start-up delay and door limit switch function ● Icing protection function● Monitoring of all motors● Phase monitoring for three-phase units
Basic controller: ● Visualisation of the operating status via LED display:
− Voltage applied, functions OK− Door open− Overtemperature− High-pressure monitor has switched
● Switching hysteresis: 5 K● Floating fault signal contact in case of overtemperature● Setpoint adjustable from outside via potentiometer (setting
range 20 – 55°C)
Comfort controller:
● Master/slave function for up to 10 units, i.e. the unit which reaches the setpoint first reports this to the “master”, which switches all the other “slaves” on and off. The unit in which the door limit switch function is activated reports this to the “master”, which deactivates all the “slaves”.
● Switching hysteresis: 2 – 10 K; preset to 5 K● System alarm, individually configurable for 2 floating fault
signal contacts● Visualisation of the current enclosure internal temperature
and all system messages on the display● Storage of all system statuses in the log file● Optional extension card (SK 3124.200) with RS232,
RS485, RS422 and PLC interface for integration into superordinate remote control systems, e.g. with CMC, is also possible
Thermoelectric Cooler – MountingInstallationWhen installed in the enclosure, the unit only protrudes by a few millimetres, and therefore does not interrupt either the aesthetic appearance or freedom of movement on support arm systems.
External mountingIts low weight also allows it to be externally mounted on sim-ple aluminium rear panels or blanking panels.
Support arm systems Thanks to its low-vibration operation and minimal weight, the thermoelectric cooler from Rittal is the ideal partner on sup-port arm systems.
Thermoelectric Cooler – ScalabilityScalable output The modular design allows simple scaling of the cooling output depending on your requirements, both horizontally and vertically.
Air/water heat exchangers – Applications
Liquid cooling IE
Air/water heat exchangers effectively dissipate high
heat losses. Thanks to the spatial separation of the
heat exchanger and recooling system, the room is not
burdened with waste heat.
Ambient conditions
Heat Dust
Liq
uid
co
olin
g IE
217Rittal System Climate Control
Ideal at any installation siteHigh ambient temperatures and extreme levels of conta-mination are ideal conditions for the use of air/water heat exchangers. If direct dissipation of heat loss to the ambient air is undesirable or ineffective due to the confined space, the air/water heat exchanger may likewise offer an ideal solution. Very effective cooling solutions for individual enclosures or bayed enclosure suites may be achieved by separating the exchanger from the recooling system.
Extreme industrial environments
Air/water heat exchangers (roof-mounted, wall-mounted)
Recooling system
1
2
3
Practical example of an air/water heat exchangerIn all areas with extreme ambient conditions, enclosure and climate control components are subject to special require-ments. This applies, for example, to metal foundries, engine factories and the chemical and metal-working industries.
In such situations, low-maintenance air/water heat exchang-ers are used as efficient all-rounders. Either fed from existing cooling water networks or from separate recooling systems, these products contribute to an ideal climate inside the enclosure. The cooling water absorbs the heat inside the heat exchanger and conveys it to the corresponding cooling system. In this way, even small rooms are not subject to addi-tional waste heat from the enclosure, and the electronics inside the enclosure are effectively protected.
1
32
2
Liquid cooling IEL
iqu
id c
oo
ling
IE
Application example: Parallel connection of 4 air/water heat exchangers
1 5
6
2 2 2 2
3
4 4 4 4
Recooling system
Air/water heat exchangers
Overflow valve SK 3301.900/.910/.920 (Bypass function with closed magnetic valve of the air/water heat exchanger)
Flow regulator valve SK 3301.930/.940 (to regulate the volume flow in air/water heat exchangers)
Non-return valve (optional)
Magnetic valve (optional)
1
2
3
4
5
6
Example: Parallel connection of air/water heat exchangers with cold water supply via a recooling system.
Overflow valves and bypass control should be integrated into the recooling system and the customer’s own pipeline system respectively.
Air/water heat exchangers – Selection criteria
218 Rittal System Climate Control
Roof or wall mounting Two design variants for mounting on the enclosure roof or the side panel or door are available in the output range from 300 to 7000 watts. Available in two control variants (Basic and Comfort control), and also optionally with all water-carrying parts made from V4A (1.4571).
High temperature range● Application areas with temperatures up to +70°C and
extreme dust contamination, e.g. in foundries, are ideal for the use of this technology.
● Spatial separation of the heat exchanger and cold water supply is easily achieved.
Recooling system
Air/water heat exchanger, roof-mounted
Air/water heat exchanger, wall-mounted
Additional cooling water circuit for machine cooling
1
4
3
3
2
1
2
3
4
Cooling medium quality requirementsFor cooling media that cannot be precisely defined, or even seawater, air/water heat exchangers with all water carrying parts of stainless steel 1.4571 (V4A) are available.
General water quality requirements are outlined on page 37 “Hydrological data”.
Rittal System Climate Control
Liquid cooling IE
Liq
uid
co
olin
g IE
Air/water heat exchangers – Assembly
Application benefitsCompact and lightweightAir/water heat exchangers have a low weight and a compar-atively low volume in relation to the heat loss dissipated. As a result, they are easily mounted on vertical enclosure sur-faces or on the roof.
Virtually maintenance-freeBecause the ingress of ambient air into the heat exchanger is prevented, dirt is unable to penetrate. Control of the air and water circuit is electronically monitored.
Sealing of the enclosureThe enclosure must be sealed on all sides (IP 54). Particular attention should be paid to the sealing of the area around the cable entry openings and above all, the floor section of the enclosure.
Additionally, the door seal must be in perfect condition.
The sealing material included with the heat exchangers must be applied in accordance with the installation instructions.
Take care not to bend the side panel or enclosure door.
Installation on enclosuresThe heat exchanger must be correctly installed.
The roof plate of the enclosure must not be allowed to give under the weight of the heat exchanger.
If necessary, additional stays should be used. Do not obstruct the air inlets and outlets of the internal circuit.
Note:For TopTherm-Plus roof-mounted units, TS 8 roof plates pre-pared with mounting cut-outs and reinforcement strips for all standard enclosure sizes are available as an accessory (see page 181).
When installing after the unit has been assembled, the twin-threaded bolts supplied loose should be screwed into the core holes in the plastic base on the underside of the device, with a maximum torque of 3 Nm.
219
Liquid cooling IE
220
Liq
uid
co
olin
g IE
Air/water heat exchangers – Air routing
Free air circulationIt is important to ensure “even” air circulation inside the enclosure. Air inlet and outlet openings in the internal circuit must on no account be obstructed by electrical installations. This would prevent air from circulating inside the enclosure. Under such conditions, the cooling capacity of the device would not be adequately utilised. A clearance of > 200 mm must be guaranteed.
Note:Wall-mounted cooling units should never be fitted directly behind the mounting plate. Active power components are located on the front of the mounting plates. The heat exchanger would then operate in its own air short-circuit.
If it is impossible to install the device any other way, appropri-ate air baffle plates should be used, and air inlet and outlet openings should be provided in the mounting plate.
200
Internal circuit – Roof-mounted unitsFlow conditionsWhen using roof-mounted units, particular attention should be paid to the air flow from the blowers of built-in electronic components such as frequency converters and other drive units.
Rittal System Climate Control
Liquid cooling IE
Liq
uid
co
olin
g IE
Air/water heat exchangers – Air routing
221Rittal System Climate Control
Air duct systemfor TopTherm-Plus roof-mounted air/water heat exchangersIt is possible to route the cold air directly to specific areas of the enclosure using the air duct system. The risk of “short circuits” in the air circulation due to self-ventilated installed devices is therefore eliminated.
Note:● Never direct the cold air flow straight at active compo-
nents.● Route the air duct system directly downwards with no
bends.● Cold air must be able to escape unobstructed at the end of
the duct.● Additional deflections will reduce the useful cooling output.● When using the ducting system, the performance of the
heat exchanger may be reduced, depending on the respective application.
● The air duct system should not be extended.
1
Accessories:Air duct system for roof-mounted units, see page 174. 1
Stoppers for TopTherm-Plus roof-mounted air/water heat exchangersFor sealing any cold air outlets that are not required.
Note:At least two outlet openings must always remain open!
Please note that if two or three openings are closed, the cool-ing output may be reduced by 20 % and 30 % respectively!
SK 3286.880 for unitsSK 3209.xxxSK 3210.xxx
max. 2x
Internal circuit – Wall-mounted unitsFlow conditions Attention should be paid to components/electronic compo-nents equipped with their own ventilation systems, such as blowers and axial fans. If their air flow is directed against the chilled air flow of the heat exchanger, this could cause an air short-circuit and prevent adequate climate control. In a worst case scenario, the heat exchanger will suffer an air short-circuit.
Note:Never direct the chilled air flow at active components.
Liquid cooling IEL
iqu
id c
oo
ling
IE
Air/water heat exchangers – Condensation management
222 Rittal System Climate Control
Condensate routing (roof-mounted units)Any condensation which forms on the heat exchanger (with high humidity and low enclosure interior temperatures) is routed to the right and/or downwards out of the device via a drain in the tray. For this purpose, a piece of hose should be connected to one of the two condensate nozzles (1 or 2). The drain which is not required should be tightly sealed. The condensate must be able to run off freely. If the con-densate is to be drained off over a greater distance, then care must be taken to ensure that the hose is free from kinks, laid with a gradient and checked for correct drain-age. Units with a Comfort controller are additionally equipped with a condensate alarm.
Condensate discharge rear
Condensate discharge right
y
1 2
y
21
1
2
Condensate discharge (flexible)
Cooling water connection (flexible)
1
2
Flexible cooling water connection and condensate drain pipeRoof-mounted units:In its delivered state, hose nozzles for connecting the cool-ing water and condensate hoses are located on the right-hand side of the unit. There is a second connection point for cooling water and condensate at the rear of the unit, which is sealed with sealing caps. If the connections at the rear are used, the sealing cap and hose nozzle should be un-screwed, cleaned and resealed using standard commer-cially available sealant (Teflon tape or hemp with sealing paste). Next, screw in the three sealing caps on the right and the three hose nozzles at the rear of the unit with the follow-ing torques:
● 15 Nm for hose nozzles for the supply and return flow● 15 Nm for sealing caps for the inlet and return● 2 Nm for condensate discharge● 2 Nm for sealing caps for condensate discharge
Note:Any condensate arising is discharged via the 1/2˝ tube con-nector and a discharge hose, which should be laid with a gradient ensuring that there are no kinks. In order to avoid increased condensation, the cooling water temperature should be adapted to match the required cooling output. Any condensate occurring may be disposed of using an external electronic condensate evaporator.
2
1
Liquid cooling IE
Liq
uid
co
olin
g IE
Air/water heat exchangers – Condensation management
223Rittal System Climate Control
Note:Condensate discharge (wall-mounted units)For wall-mounted units, a hose should be connected to the condensate nozzle on the bottom of the unit.
The condensate drain pipe should be laid with a gradient, taking care to ensure there are no kinks in the pipe!
Condensate dischargeIf the condensate discharge is extended, its cross-section must not be reduced.
Accessories:PVC condensate hose
Condensate hose For unit(s)
SK 3301.612 (12 x 2) SK 3209.xxx/SK 3210.xxxSK 3364.xxx/SK 3373.xxxSK 3374.xxx/SK 3375.xxx
Liquid cooling IE
224
Liq
uid
co
olin
g IE
Air/water heat exchangers – Electrical connection and control
Supply connection● Supply connection data (voltage and frequency) must be
observed in accordance with the rating plate.● The pre-fuse specified on the rating plate must be used.
Rated voltage 230 V 50 Hz/60 HzRated current 0.4/0.48 APre-fuse T 4 APower consumption 95/110 WUseful cooling output 400 l/h L 35 W 10 2500 W
Cooling medium Water (see specifications)
Use of door-operated switchesOne floating door-operated contact should be used for each unit; under no circumstances must several air/water heat exchangers be operated via one door-operated switch.
In environments with increased electromagnetic interfer-ence, a shielded cable should be used. Alternatively, the door contact may be switched e.g. via an additional relay in the vicinity of the air/water heat exchanger.
Note:The cables should be laid separately from the mains cables; short cable distances should be observed.
CablingSignal data cable
Control cable
Motor cable
The power cable, power supply unit cable, signal cable and data cable must be laid separately; cable lengths should be kept as short as possible. Avoid coupled sections.
1
2
3
1231
2
3
Rittal System Climate Control
Liquid cooling IE
Liq
uid
co
olin
g IE
Air/water heat exchangers – Electrical connection and control
Intelligent controlThe two controller variants for operational reliability offer a comprehensive range of functions. Essential control elec-tronics are well protected and cooled in the inner circuit.
Both variants have the following properties: ● Three voltage options: 115 V, 230 V, 400/2 ˜● Integral start-up delay and door limit switch function ● Leak detection● Monitoring of all motors
Basic controller: ● Visualisation of the operating status via LED display:
− Voltage applied, functions OK− Door open− Overtemperature
● Switching hysteresis: 5 K● Floating fault signal contact in case of overtemperature● Setpoint adjustable from outside via potentiometer (setting
range 20 – 55°C)
Comfort controller:
● Master/slave function for up to 10 units, i.e. the unit which reaches the setpoint first reports this to the “master”, which switches all the other “slaves” on and off. The unit in which the door limit switch function is activated reports this to the “master”, which deactivates all the “slaves”.
● Switching hysteresis: 2 – 10 K; preset to 5 K● System alarm, individually configurable for 2 floating fault
signal contacts● Visualisation of the current enclosure internal temperature
and all system messages on the display● Storage of all system statuses in the log file● Optional extension card (SK 3124.200) with RS232,
RS485, RS422 and PLC interface for integration into superordinate remote control systems, e.g. with CMC, is also possible
225Rittal System Climate Control
Liqu
id c
oolin
g IE
Liquid cooling IERecooling systems/chillers –
226
Applications
Recooling systems ensure centralised, efficient cool-
ing and supply of the cooling medium (generally
water), and are used with particularly high heat loads.
They may serve several pieces of equipment simulta-
neously, and are particularly effective in terms of cool-
ing output.
Ambient conditions
Heat Dust
Application diversity of centralised cooling technology
Enclosure coolingIn conjunction with air/water heat exchangers, optimum dissipation of high heat loads is guaranteed, even under extreme ambient temperatures and air con-tamination levels.
Cooling of liquid mediaDirect and indirect cooling of liquids are the prerequisite for ensuring the required machine precision and speed.
Process coolingHigh-quality material processing, such as laser cutting, necessitates high levels of temperature preci-sion with simultaneous cooling of the peripheral technology.
Rack cooling ITRittal offers solutions for base load cooling and ambient air-neutral, high-performance cooling for all IT sectors.
Rittal System Climate Control
Liquid cooling IE
Liqu
id c
oolin
g IE
Recooling systems/chillers – Selection criteria
227Rittal System Climate Control
Generally speaking, recooling systems are divided into open and closed systems.
In the pressure-sealed configuration, the water circuit is equipped with a pressure relief valve and automatic exhaust. There is no need to top up the water.
Recooling systems designed as an open system have a tank made of PP/PE plastic or stainless steel 1.4301 with lid built into the recooling system. This is easily filled.
If a recooling system is required to serve several pieces of equipment having different requirements in terms of inlet temperature and flow rate of the cooling medium, e.g. com-bined enclosure and process cooling, multi-circuit systems are used. In such cases, the different circuits may be tai-lored to the respective equipment.
If there is already a central cooling water supply available at the installation site, e.g. in the case of plant water in the auto-motive industry, recooling systems may optionally be fitted with a water-cooled condenser. One of the major benefits of this solution lies in the fact that the factory temperature is not additionally raised by waste process heat.
Liquid cooling IEMini-recooling systems● Cooling output from 1 to
6 kW ● Space-saving, compact
design● Attractive design● Wall-mounted units: Inte-
gration into the machine and enclosure housing without using additional floor space
Recooling systems integrated into the TS 8 Top enclosure system● Cooling output from 6 to
60 kW● Compact design ● Option of integration into
existing TS 8 enclosure combinations
Recooling systems in a floor-standing enclosure for water and oil● Cooling output from 2.1 to
26 kW ● Stand-alone enclosure● Minimal base area● The functionally equipped
design facilitates the cool-ing of oil and water
● There are a range of options available
Recooling systems in an industrial enclosure● Cooling output up to
502 kW● High cooling output with
optimised space require-ments
● Removable enclosure pan-els offer easier accessibil-ity in case of servicing
Immersible recooling systems● Wherever it is necessary to
cool dirt-contaminated media (metal swarf or aggressive sludge)
● High-end flat condenser made of stainless steel
● Sealed cooling circuit
Power Fluid Cooler ● Fast delivery range ● Standardised version
available ex works ● New design in the output
category 8 to 59 kW ● Defined options
Liquid cooling ITData centre with recooling systems● Recooling systems ensure
central cooling and supply of the cooling medium for liquid cooling sys-tems
● Spatial separation between refrigeration and cooling for temperature-neutral expansion of the data centre.
Liquid cooling IE
228
Liqu
id c
oolin
g IE
Recooling systems/chillers – Assembly
Unity with enclosuresFor example, recooling systems may be connected directly to a bayed enclosure suite, providing effective, centralised cooling for all enclosures and housings on a machine or system.
Recooling systems in the TS 8 Top enclosure system are eas-ily integrated into existing enclosure combinations. For appli-cations in confined conditions, the Mini-recooling systems for wall and roof mounting are ideal, with their space-saving, compact design.
Recooling system
Air/water heat exchanger, roof-mounted
1
2
2
1
2
Spatially separatedHigh heat loads can even be dissipated in confined and awkward spaces, thanks to the spatial separation of the recooling system from the enclosures and machine. In all cases, as well as enclosure cooling, cooling water may also be produced for process and machine cooling or for cooling liquid media.
Recooling systems in floor-standing and industrial enclo-sures, with their robust design, are the ideal stand-alone solution, and provide optimum accessibility for servicing purposes.
Recooling system
Air/water heat exchanger, roof-mounted
Air/water heat exchanger, wall-mounted
Other components, e.g. machine cooling
12
3
3
4
1
2
3
4
Outdoor sitingTo avoid putting additional pressure on the factory air with the waste heat incurred during the process, the recooling system may be supplied with the option of outdoor siting (for ambient temperatures down to –20°C).
In such cases, a rain canopy should be provided to protect the recooling system from extreme weather. The water circuit must be filled with 34 % anti-freeze agent Antifrogen N (or equivalent) to 66 % water in relation to the total water vol-ume, or with Rifrost 1 : 2.
IT chillers do not require a rain canopy.
Rittal System Climate Control
Liquid cooling IE
Liqu
id c
oolin
g IE
Recooling systems/chillers – Notes
229Rittal System Climate Control
Assembly and commissioningWhen siting the recooling system, the following points should be observed:● Connection of an inlet and outlet duct requires the manu-
facturer's prior consent. − Performance loss (air-cooled recooling system)
● Never site the recooling system in the vicinity of a heater.− Performance loss
● The recooling system may only be sited on flat, solid surfaces. The maximum permissible deviation from the vertical is 2°.
● Connect the equipment to the recooling system using insulated pipe or hose connections.
● If the equipment is positioned higher than the recooling system, install a non-return valve upstream in the inlet and a magnetic valve in the return.− To avoid overflowing the tank.
● With recooling systems that are intended for covered out-door siting, the minimum external temperature is given in the technical specifications.
● In the case of recooling systems (for water) at tempera-tures below zero, a water/glycol mixture should be added in the prescribed ratio.
● If it is possible to shut off the equipment cycle, a bypass must be provided in order to protect the pump.
● Under no circumstances must the circulation pump be allowed to run dry – Damage to the pump.
1
2
In the case of air-cooled recooling systems, the following mini-mum distances from the wall and ceiling should be observed:
Wall: At least 1x condenser height
Ceiling: At least 3x the condenser height
1
2
Re-cooling system
Distance from equipmentSite the recooling system close to the equipment in order to avoid long distances, which could lead to performance losses. When selecting the installation site, care should be taken to ensure easy access at all times; this will make main-tenance of the system easier.
You should also ensure adequate ventilation of the room where the recooling system is sited. If there is inadequate ventilation, the temperature of the room will increase as a result of waste heat, leading to impaired performance of the recooling system.
Cooling mediaApart from the recooling systems for oil and emulsion, all other recooling systems are only suitable for the cooling of water or a water/glycol mixture. When filling the systems for the first time, water from the existing supply line is generally suitable, although care should be taken to ensure a consist-ent water quality.
However, as satisfactory results are only rarely achieved with-out water treatment, additives should always be added to the cooling water, irrespective of the installation site. As well as protecting against frost, these also serve to impair bacterial growth and achieve optimum corrosion protection.
Pre-mixed additive is available from Rittal in the mix ratios ● 1 : 2 for outdoor siting● 1 : 4 for standard applications, available in 10 l, 25 l and
200 l containers. See page 194.
Liqu
id c
oolin
g IT
Liquid cooling ITAisle containment – Benefits
230
Instead of flooding the room with cold air, this Rittal concept routes the cold air generated directly to the equipment via the cold aisle. The servers are supplied with chilled air distributed evenly across the entire rack height. Due to the cold aisle being contained there is no chance of the hot exhaust air mixing with the cold inlet air, leading to enhanced system efficiency.
The outstanding energy efficiency of the Rittal cold aisle concept has a simple and plausible explanation:
1. Cold and hot air cannot mix, hot air does not flow into the cold aisle. 2. The system can be operated with a much higher waste air temperature. 3. Standard air circulation cooling units are operated at an optimum thermal efficiency level.
Standard market concepts
Hot air extraction using a duct system
● Complex and costly duct system.● Larger surface area and height require-
ments. ● Limitation of the raised floor height.● As a result, there is no uniform cooling
air supply to the room area.● Cable management is made more
difficult.● Limited rack positioning flexibility due to
the air duct connection.
Rittal aisle containment
Cold aisle variant
● Use of standard, inexpensive CRAC sys-tems. Positioning outside the server area.
● Even with low room heights, the raised floor height for cooling air supply can be maximised without flow losses.
● Undisturbed and uniform air flow distribu-tion of cooling air in the cold aisle guaran-tees high efficiency.
● Favourable working conditions in the cold aisle due to low temperature, flow and noise load conditions.
● Hardware racks not connected to the enclosure do not impair the cooling efficiency of the cold aisle.
H
●
●
●
●
ot aisle variant
Standard CRAC systems cannot be used here.Inline climate control systems are needed to cool the air. The waste air produced can be selec-tively controlled. Efficiently raises the waste air tempera-tures without impairing the environment.
Rittal System Climate Control
Aisle containment – Usage
Liquid cooling IT
T
1
2
3
4
5
6
7
8
231
Liqu
id c
oolin
g I
Rittal System Climate Control
Representation of the air flows in the cold aisle variant
Supply of cooled air via the raised floor. The recirculation cooling units can be installed in an air conditioning strip or an external technical building.
Air supply to the cold aisle via air outlet grilles in the floor void. The feed air quantity is calculated and regulated based on the cold load to be removed.
A cold air pool forms in the sealed cold aisle according to the fresh air princi-ple. The hardware components draw the required cooling air quantity from this source.
The heat-laden waste air is discharged to the surroundings and rises to the ceiling.
A cushion of hot air forms below the ceiling. The hot air cushion cannot force its way into the cold aisle thanks to isolation.
Unimpeded suction of the exhaust air out of the air space. The separation enables high exhaust air temperatures, therefore the overall equipment effi-ciency of the cooling units is maximised.
The temperature neutrality of server racks fitted with LCP climate compo-nents allows them to be positioned in the room for expansion or extension purposes.
Optimised use of the server room area by use of sliding doors to further isolate the cold aisle.
1
2
3
4
5
6
7
8
Liquid cooling ITAisle containment – Applicat
232
Liqu
id c
oolin
g IT
ion examples
Rittal cold aisle containment with CRAC systems (cold aisle variant)
1
5
By using cold aisle containment, climate control of the room (in conjunction with the CRAC system) may be optimised in terms of energy efficiency and cooling output.● High energy efficiency● Increased cooling output per server enclosure● Easily retro-fitted to existing systems● Protection of your existing infrastructure
2
3
4
Aisle containment (cold aisle variant)
CRAC systems
Water/water heat exchanger
IT chiller
Temperature-neutral expan-sion, e.g. with LCP Smart
1
2
3
4
5
Aisle containment with LCP Inline (cold aisle variant)
1
5
2
In conjunction with the new LCP Inline, the cold aisle variant is a further option for the efficient dissipation of high heat loads from server enclosures. ● A raised floor is not required for climate control● To accommodate higher heat loads per server enclosure● Redundancies easily achieved● Direct supply of cold air to your server and network components
3
4
Aisle containment (cold aisle variant)
LCP Inline
Water/water heat exchanger
IT chiller
Temperature-neutral expan-sion, e.g. with LCP Extend
1
2
3
4
5
Rittal System Climate Control
Rittal System Climate Control
Liquid Cooling Package Plus, Smart, Extend
Liquid cooling IT
Basic solutions
CRAC systems
with aisle c
LCP Extend
LCP Inline
duct
LCP Standard/Smart
LCP Plus
Pro
ontainment
with aisle containment
Low DensityThe entry-level option for professional IT climate control
MidThesoludata
Density tailor-made tions for discerning centres
HigThsolda
h Densitye most powerful utions for high-end ta centres
Cooling requirements
LCP Plus Functional principle: Air/water heat exchanger, bayable with server racks based on TS 8 (H x D 2000 x 1200 mm). Complete unit with 30 kW useful cooling output.
The separation of cooling and rack prevents water from penetrating the server rack, and makes it very easy to assemble and service.
LCPs are easy to handle (max. 2 m) and may be transported in lifts and through doors. The low weight means a minimal area load.
Liqu
id c
oolin
g IT
LCP Smart Functional principle: The LCP Smart draws in air at the rear of the server enclosure, cools it, and blasts the cooled air back into the front part of the server enclosure.
Differences compared with the LCP Standard: ● Fans may be individually exchanged with the system operational. ● Basic CMC as standard. ● Touchscreen display may be retrofitted. ● Shorter service times. ● Extended functionality of the monitoring and control technology/
software. Optimum adaptability thanks to dynamic, continuous control of the cold water volume flow.
LCP Extend
Functional principle: Air/water heat exchanger for retrofitting to racks while operational.The stand-alone unit replaces the rear door (for other brands on request).
Mounted on the rear of the server enclosure and eases the pressure on the room air-conditioning system.
Technical specifications: ● Up to 12 kW useful cooling outputMax. air volume 3000 m3/h.
233
En
clo
sure
hea
ters
Enclosure heaters
Applications/assembly/electrical connection234 Rittal System Climate Control
Installation positionHeaters should always be installed in an upright position. Leave a distance of 50 mm at the top and bottom to allow convection. In order to increase efficiency, where possible, heaters should always be fitted in the lower part of theenclosure.
effective ineffectiveFlow circuit Installation position
Installation option for enclosure heatersThe device is attached vertically, i.e. with the connection cable pointing downwards. The connection cable should be tightly secured. In order to create the required convection, a distance of at least 50 mm from components must be main-tained above and below the device. The thermal safety clear-ance from neighbouring components is at least 35 mm. Pro-vided these distances are observed, an ambient temperature of 65°C will not be exceeded.Enclosure heaters are used to prevent the formation of con-densation inside the enclosure and maintain a constant minimum operating temperature (e.g. when the system is switched off overnight). They achieve thermal outputs of 10 to 800 watts.
Electrical connectionDue to the particular characteristics of the PTC thermal ele-ment, the startup current is approx. 1.8 A for around 0.5 sec. A slow pre-fuse (gL) is therefore essential.
According to IEC 6100-4-5, a fuse is to be provided by the customer for pulse loads in excess of 1000 V. The surface temperature of the aluminium section is regu-lated automatically. A separate thermostat (SK 3110.000) should be connected to control the room temperature. To control the air humidity inside the enclosure, a hygrostat (SK 3118.000) may be connected upstream.
Monitoring
All the relevant parameters for the function and cooling
output of the climate control components are available
on the control desk for monitoring and control
purposes.
Mo
nito
rin
g
235Rittal System Climate Control
Master/slave operationIn open bayed enclosure systems which are not separate from one another, cooling units and air/water heat exchang-ers with Comfort control should always be used. These may be placed in master/slave mode via bus cable SK 3124.100:
● Simultaneous activation and deactivation of the devices● Parallel fault and door limit switch function ● Even temperature distribution across all sections of the
enclosure 1
2
3
7
4
5
5
6
Control cabinets
Wall-mounted unit
Roof-mounted unit
Comfort controller
Door limit switch
Connection terminals 1 and 2 of the cooling unit
Master/slave unit
1
2
3
4
5
6
7
Interface cardThe new interface board (SK 3124.200) is an extension for TopTherm-Plus cooling units and air/water heat exchangers with Comfort controller; see page 179. In this way it is possi-ble, e.g. to monitor a master/slave combination of up to 10 cooling units. Control is achieved via standardised inter-faces RS232 (DB9) or RS485, a PLC interface. RS422 (RJ 45 jack) is the connection to the Rittal CMC-TC. Remote moni-toring via TCP-IP, graphical interfaces for operation, evalua-tion and control, documentation, and connection to addi-tional sensors for access control facilitates monitoring.
The extension card is built into a 1 U plastic housing. A volt-age supply of 24 V (DC) is required. This can be supplied from the CMC-TC via long-range power pack or externally via a Kycon connector.
Further information may be found in our assembly and oper-ating instructions, at www.rittal.com –> Products –> Product search–> SK 3124.200.
Warnings and alarms from the interface board● Interior temperaure too
high● Icing● High-pressure sensor● Leakage● Condenser/fan defect● Evaporator coil/fan defect● Compressor defect● Sensor failure, condenser
temperature
● Sensor failure, ambient temperature
● Sensor failure, icing sensor
● Sensor failure, conden-sate level
● Sensor failure, internal temperature
● Phase missing or incorrect ● EEPROM defect
MonitoringM
on
itori
ng
236 Rittal System Climate Control
Application example: Master/slave operation and interface board
Control point/server room
Recooling system
Machining centre
Welding robot
1
2
2
3
4
4
1
2
3
4
Connection example: Master/slave operationwith bus cable and interface board
Serial interface board,Model No.: SK 3124.200
Serial interface cable
Master/slave BUS cable, Model No.: SK 3124.100
RTT = Rittal TopTherm-Plus cooling unit/Air/water heat exchanger
X1 = Supply connection/door limit switch/alarmsX2 = Master/slave connection SUB-D 9-poleX3 = Serial interface SUB-D 9-poleSt. = SUB-D connector 9-poleBu. = SUB-D jack 9-pole
Description:The address of the master depends on the number of attached slave units (09 = master with 9 slave units). The address of a slave device always begins with a 1. The sec-ond number represents the actual address. Up to a maxi-mum of 9 slave units may be operated with one master unit, whereby any unit may be a master. The maximum overall length of all connected units is 50 m. Single-phase and 3-phase units may be connected.
CMC
RTTMaster
Adr.: 09
X1
X2 X3
RTTSlave
Adr.: 11
X1
X2 X3
Adr.: 12
X1
X2 X3
Adr.: 19
X1
X2 X3
X2 X3 X2X2
X2 X2 X2 X2
X2
X2
St. St. St. St.
St.Bu. Bu.
St.
St.Bu.
1
RTTSlave
RTTSlave
2
3
1
2
3
Monitoring
Mo
nito
rin
g
237Rittal System Climate Control
Only one unit may be configured as master; the address ID must match the number of slave units. All slave units must have different addresses, and the addresses must be in ascending order without any gaps in between.
If changes are made to the configuration of the master, please proceed as follows:
1. Disconnect any existing connections between the RTT I/O unit and the PU– Timeout on the PU
2. Confirmation on the PU– Unit has been removed
3. Make the required changes to the master
4. Make the connection between the RTT I/O unitand the PU – Message on the PU “Unit found”
5. Wait 60 s then confirm– RTT I/O unit is correctly displayed with all its slaves
in the Web
Configuration settings on the cooling unit master regarding the number of slaves must only be made if there is no supply voltage at the RTT I/O unit, neither from the PU nor externally.
Notes on connecting cooling units and air/water heat exchangers in the master/slave combination
Enclosure monitoring system CMC-TC The RTT I/O unit may be connected to the CMC-TC system (Ethernet, TCPIP, SNMP, HTTP).
Note:For detailed information, see Cat. 32, page 806.
Programming cable Processing Unit II
Power pack
Connection cable for power pack
Connection cable for sensor units
Up to 4 sensor units
Technical Details
Cooling with ambient air from page 240Fan systems....................................................................................240Air/air heat exchangers...................................................................241
Cooling units from page 245Modular climate control concept ....................................................245Roof-mounted cooling units ............................................................246
Wall-mounted cooling units ............................................................247Thermoelectric coolers ...................................................................250
Liquid cooling IE from page 251Air/water heat exchangers ..............................................................251Cold Plate........................................................................................255Recooling systems .........................................................................256
Liquid cooling IT from page 266Chillers for IT cooling ......................................................................266Water/water heat exchangers ........................................................267
Enclosure heaters from page 267Enclosure heaters ..........................................................................267
ical
det
ails
System accessories from page 268Electric condensate evaporator......................................................268Integrated louvres ...........................................................................268
239Rittal System Climate Control
Tech
n
Technical detailsTe
chni
cal d
etai
ls
Rack-mounted fansfor 482.6 mm (19˝), air throughput 320/480 m3/h Page 52
Rack-mounted fan Vario rack-mounted fan Vario rack-mounted fan
mounted between a pair of 482.6 mm (19˝) mounting anglesmounted in subracks 84 HP
mounted between a pair of 482.6 mm (19˝) mounting anglesCentrifugal fansAir throughput 320 m3/h Page 53
17
Front grille
Roof-mounted fansAir throughput 360 m3/h Page 54
Mounting cut-out
Without fan W
ith fan50
RTT roof-mounted fan and vent attachment Air throughput (unimpeded air flow) 400/800 m3/h Page 54
Mounting cut-out
Fan systems
240 Rittal System Climate Control
1
2
465.1
482.6 (19″)
76.2
88
380
163
7560
250
345
265
360
280
Ø 8
□ 260 x 340
15 44
420
340
550
500
101
125
20
370
290
475 + 1
260
+ 1
Technical details
B1
Fan roof, modular, two-piece for TS/FR(i)Air throughput per fan (unimpeded air flow) 160/180 mm3/h at 50/60 Hz Page 58
Rittal System Climate Control
For enclosures Cover plate Roof dimensionsC D Model No.
TSWidthmm
Depthmm Solid Vented B1 B2 T1
600 600 2102.180 2102.400 567.5 435 567.5 400 224 7826.366
600 800 2102.190 2102.410 567.5 435 767.5 400 424 7826.368
600 900 2102.190 2102.410 567.5 435 867.5 400 424 7826.369
600 1000 2102.190 2102.410 567.5 435 967.5 400 424 7826.360
800 600 7885.100 7885.200 767.5 635 567.5 600 224 7826.486
800 800 7886.100 7886.200 767.5 635 767.5 600 424 7826.488
800 900 7886.100 7886.200 767.5 635 867.5 600 424 7826.489
800 1000 7886.100 7886.200 767.5 635 967.5 600 424 7826.480
Air/air heat exchangersWall-mounted Page 62
SK 3129.800 Mounting cut-out for external mounting
External mounting
Rear S
Mfoinide view
164
ounting cut-outr external and ternal mounting
110
Optional cable gland 1
Tech
nica
l det
ails
Air/air heat exchangersRoof-mounted Page 65
Rear Mounting cut-outfor external and internal mounting
Side view
420
301
360
400
440
320
480
600
Ø 23 (2x)
Ø7(4x)
62 45
50
21
440 595
362
Fan systems/Air/air heat exchangers
T1
D
36.5
133
223.
5
3
C
B2
B = WidthT = Depth
200
32.5
130
135.
5
1
147
36
159
400
1 378
400
1360
280
35 25
295
380
110
325
275
(655
)
1360
25
30.5
75
350
210340
280
400
Ø 13 (8
x)
Ø 30
241
Technical detailsTe
chni
cal d
etai
ls
Air/air heat exchangersWall-mounted, railway-compatible version, specific thermal output 27 – 98 W/K Page 64
Mounting cut-out SK 3126.4xx
External mounting Installation with adjustable frame
280
127
282
244 60Internal mounting
8
254
107
Adjustment options
Microcellular rubber seal EPDM, black 12 mm, as solid all-round rubber seal
1
Mounting cut-out SK 3128.4xx
External mounting Installation with adjustable frame
27.5 250
400 140
70 250
23
Internal mounting370
0 10
Adjustment options
Microcellular rubber seal EPDM, black 12 mm, as solid all-round rubber seal
1
Air/air heat exchangers
242 Rittal System Climate Control
650
22.5
22.5
600
611
255
Ø 7 (4 x)
(66.
5)23
699
= =
Ø 8 (8 x)
==
520
653
328
57
254
75.5
21.5
Ø 8 (8 x)
74
650
362.
5
105
254
118
105
215
624
17.5
37.5
89.5
109.
5
60 60
84.5
104.
5
127
42.5
22.5
1.5
60
1
27.5
7.5
M6
M6
30
7.5
50
327
950
36.5
180180
280
255
920
385
345
20160
30
50
327
Ø 40 (2 x)
Ø 9.5 (8 x)
999
250
750
953
250
448
402
336
5
160
920190.5
619
127
198
175
175
39.5
39.5 28
Ø 8 (7 x)
70
92.5
112.
5
47.5
27.5
140
250
70
27.5
47.5
92.5
112.
5
50
7.5
30
M6M6
M6
1
7.5
27.5
Technical details
Tech
nica
l det
ails
Air/air heat exchangers
243Rittal System Climate Control
Air/air heat exchangersWall-mounted, railway-compatible version, specific thermal output 27 – 98 W/K Page 64 Mounting cut-out SK 3129.4xxExternal mounting Installation with adjustable frame
Mounting cut-out SK 3130.4xxExternal mounting Installation with adjustable frame
Internal mounting
Adjustment options
Microcellular rubber seal EPDM, black 12 mm, as solid all-round rubber seal
1
25 250
400
327
950
25
210210
280
255
920
385
345
35145
35
50
327
Ø 4
0 (2
x)
Ø 9.5 (8 x)
150
70
250
23
999
250
750
953
250
448
402
400
1580
210
210
65
395
280
380
275
875
340
260
320 1530
Ø 4
0 (1
x)
Ø 1
1 (8
x)
150
70 402
1582
448
250
1480
1628
200
280
260
260
280
200
320
113
205
205
1558
924.
5
97.5
67.5
370
370
400
965
1580
367
215
62.5 200
Ø 1
1 (6
x)
Ø 8
(2 x
)
250
27.5
47.5
102.
5
122.
5 92.5
112.
5
57.5
47.5
15070
70
50
7.5
30
M6M6
M6
1
7.5
27.5
Internal mounting
Adjustment options
Microcellular rubber seal EPDM, black 12 mm, as solid all-round rubber seal
1
370
3036
5
160
10
920190.5
619
127
215
180
180
37
37
19.5
250
27.5
47.5
102.
5
122.
5 92.5
112.
5
57.5
37.5
15070
70
50
7.5
30
M6M6
M6
1
7.5
27.5
Technical detailsTe
chni
cal d
etai
ls
Air/air heat exchangers
244 Rittal System Climate Control
280
550
501
251
18 x 45°
280
(230)
200
254
524
Ø 8 (4x)
Ø 15 (2x)
266
2549
2
518
550
280
550
150 42
108
TopTherm air/air heat exchangers Wall-mounted with controller, specific thermal output 17.5 W/K Page 63
Mounting cut-out for external mounting
Mounting cut-out for internal mounting
Internal mounting
External mounting
400
250
345 280
36.5
235
255
950
15
350
25
Ø 9.5 (8x)
385
350
380
Ø 9.5 (4x)
400
370
R6 (4x) 25
920
920
950
25 x
45°
950
400 205 (225)
50
155 (175)
Wall-mounted with controller, specific thermal output 30 – 60 W/K Page 63
Mounting cut-out for external mounting
Mounting cut-out for internal mounting
External mounting
Internal mounting
Dimensions in brackets for 45 W/K and 60 W/K
280
350
Ø 13 (8x)
400
3529
5
380
1580
260
2587
5
320
275
340
400
370
324
324
Ø 13 (4x)
1558
1554
1538
1580
Ø 12 (2x)
22
R6 (2x)
3761580
400 215 50
165
Wall-mounted with controller, specific thermal output 90 W/K Page 63
Mounting cut-out for external mounting
Mounting cut-out for internal mounting
External mounting
Internal mounting
Technical details
Cooling modulesUseful cooling output 1500/2500 W Page 70
1500 W
2500 WSection doorsPage 71
For enclosures
600 mm wide
800 mm wideFor enclosures 1200 mm
Device position
Left
RightTech
nica
l det
ails
Modular climate control concept
245Rittal System Climate Control
115/135
1561
500
1608
135
85
115
85
135
461
115
461
140
820
145
1777
.5/1
977.
5
592
94
1777
.5/1
977.
5
792
94
1777
.5/1
977.
5
592
94
1777
.5/1
977.
5
592
94
Technical detailsTe
chni
cal d
etai
ls
597 379
Roof-mounted cooling unitsUseful cooling output 500/750 W Page 74
Mounting cut-out
475
597
Condensate discharge 1/2˝, flexible1
597 475
Mounting cut-out
490
597
Useful cooling output 1000 W Page 75
Useful cooling output 1100 W Page 76
Useful cooling output 1500/2000 W Page 77
Condensate discharge 1/2˝, flexible1
Useful cooling output 3000 W Page 76 Mounting cut-out901
Useful cooling output 3000/4000 W Page 78 Mounting cut-out
Condensate discharge 1/2˝, flexible
1
Roof-mounted cooling units
246 Rittal System Climate Control
417
365
Ø 80 30
1
417
326
1701
260
326
379
417
380
Ø 100 27
1
417
420
2801
420
390
475
692
597
392
597
Ø 150
404
511.
5
37
488.5
901
511.
5
470
796
538
Ø 150
38.5
1
580
238Ø 150
1580 52
0
392
796
692
Technical details
Wall-mounted cooling unitsMini in horizontal format, useful cooling output 300 W Page 83
Mounting cut-out for external mounting
Mounting cut-out for internal mounting
External mounting
Internal mounting
153
9898
Useful cooling output 300 W Page 84
280
Mounting cut-out for external mounting
Mounting cut-out for internal mounting
Internal mounting
External mounting
280
etai
ls
Useful cooling output 500 W Page 84Useful cooling output 750 W Page 85
Partial internal mounting
External mounting
Internal mounting
Mounting cut-out for external mounting
Mounting cut-out for partial internal mounting
Mounting cut-out for internal mounting
d
T3 l a 280Tech
nic
T1 T2 T3 T4 T5500 W 210 100 110 164 42750 W 280 125 155 235 42
Wall-mounted cooling units
247Rittal System Climate Control
6
340
27
281
471
525
525
340
55
7.5
5.5
2020
314
325
340
7.5
20
5.5
525
510
499
Ø 7
.5 (4
x)
280
550
140 42
550
501
251
18 x 45°(230)
200
254
524
Ø 8 (4x)
Ø 15 (2x)
266
2549
2
518
550
280
550
T1 T2T5
T4
262
266
280
480
15.5
550
Ø 8 (4x)
532
254
200
18 x 45°
Ø 8 (4x)
(230)
524 266 49
225
518
550
Ø 19 (2x)
254
266
18 x 45
Ø 8 (4x)
(230)
280
524 49
720
523
550
Technical detailsTe
chni
cal d
etai
ls
Wall-mounted cooling units
248 Rittal System Climate Control
950
400
Wall-mounted cooling unitsUseful cooling output 1000/1500 W Page 87
Mounting cut-out for external mounting
Mounting cut-out for internal mounting
Mounting cut-out Partial internal mounting
External mounting
Internal mounting
Partial internal mounting
260
155105 50
210 370
330
Ø 9.5 (4x)
380950
920
920
25 x 45
400
380
Ø 9.5 (4x)
400
370R6 (4x) 25
920
920
950
2
25 x
45
400
250
345
280
36.5
235
255
950
15
350
25
Ø 9.5 (8x)
385
350
1580
400
Useful cooling output 2000/2500 W Page 89
Mounting cut-out for partial internal mounting, internal mounting
Mounting cut-out for external mounting
50
245
150
145
295
400
370
320
320
Ø 13 (4x)
1558
1554
1540
1580
R9.5 (2x)
20
R9.5 (2x)
376
280
350
Ø 13 (10x)
400
3531
0
380
1580
260
2555
0
320
275
340
325
External mounting
Internal mounting1)
Partial internal mounting
1) For installation in 600 mm wide doors, move the mounting cut-out from the centre of the door to the hinged side by at least 10 mm.
500
1580
Useful cooling output 4000 W Page 90
Mounting cut-out for partial internal mounting
Mounting cut-out for external mounting
340 145 195
External mounting
Partial internal mounting
500
362
153015
50
25
474
Ø 13 (4x)
1580
500
380
440
440
Ø 13 (10x)
4533
0
1580
164
360
380
500
375
380
275
25
Technical details
Tech
nica
l det
ails
Wall-mounted cooling units
249Rittal System Climate Control
435
1590
382
12 140
205
4545
1500
Ø 8 (10x)
155
354
340
326
354
240
5526
016
5.5
353
360
85.5
360
353
78.5
354
354
49
1510
400
Wall-mounted cooling unitsUseful cooling output 1500 W Page 88 (SK 3366.XXX and SK 3377.XXX)
Mounting cut-out for external mounting
Mounting cut-out for internal mounting
Internal mounting
External mounting
285
620
238
298
185
285
262
1219
017
217
076
1917
3.5259
220
7014
3.5
620
Ø 8 (8x)
Design NEMA 4x, useful cooling output 500 W Page 91
External mounting Mounting cut-out for external mounting
405
1020
358
245
298
38.5
250
1020
350
93
350
Ø 9.5 (8x)
8338
525
5
345 280
405
250
Design NEMA 4x, useful cooling output 1000/1500 W Page 91
External mounting Mounting cut-out for external mounting
Technical detailsTe
chni
cal d
etai
ls
Wall-mounted cooling unitsDesign NEMA 4x, useful cooling output 2000/2500 W Page 92
External mounting Mounting cut-out
405
for external mounting
Thermoelectric coolerPage 97
155
External mounting
100 55
Internal mounting
Wall-mounted cooling units/Thermoelectric cooler
250 Rittal System Climate Control
405
1650
388
275
328
3731
0
1650
260
408
320
Ø 13 (10x)
550
380
280
350
9327
532
5
125
1100
85
(8.5)
(12.5)
125
108
377
11.5 10 7
25
15
15
25
11
18
25
40
Ø 6.5
Ø 12
400
386
1
377
100
(8.5)
(12.5)
125
10811.5
15
25
Ø 6.5
400
366
25
400
400
100
55
Mounting cut-out for external mounting
Mounting cut-outfor internal mounting
Outer contour of climate control unit 1
Technical details
Air/water heat exchangersRoof-mounted, useful cooling output 2500 W Page 102
Roof-mounted, useful cooling output 4000 W Page 103
Condensate discharge 1/2˝
Cooling water connection 1/2˝
1
2
Micro, wall-mounted, useful cooling output 300 W Page 104
Mounting holes for internal mounting
Mounting cut-out for external mounting
Cooling water connection
Condensate discharge
1
2
Wall-mounted, useful cooling output 600 W Page 105
Mounting holes Mounting cut-out Condensate discharge 1/2˝1
ails
for internal mountingt
for external mounting
de
Cooling water connection 1/2˝2
Tech
nica
l
Air/water heat exchangers
251Rittal System Climate Control
280
420
475
417
380
Ø 100 (4x)
59727
490
597
390
420475
1 2
85
18
55
1 2
300
150
60
300
276
102
150
Ø 7 (4x)30
0
276
232
41
150
125
102
Ø 7 (4x)
18
75
100
12
80
500
200
420
200
500
150
Ø 7
420
500
170
50
30
133
150
150
160
200
130
145
34 Ø 74x
160
Technical detailsTe
chni
cal d
etai
ls
Air/water heat exchangers
252 Rittal System Climate Control
Ø 7 (4x
)
1192
0
200
140100
18
75
12
80
950
200
175
170 15
475
315
24
126
96
1992
0
950
164
140
Ø 7 (6x)
Air/water heat exchangersWall-mounted, useful cooling output 1250 W Page 105
Mounting holes for internal mounting
Mounting cut-out for external mounting
Condensate discharge 1/2˝
Cooling water connection 1/2˝
1
2
90
550
15
520
4914
250
280
91 14
1
550
280
90 70
2150
2
1
90
550
280
2915
50
140
12
140140
Wall-mounted, useful cooling output 500 W/1000 W Page 106 Mounting cut-out for external mounting
Mounting cut-outfor internal mounting
Ø 6.5 (4 x for internal and external mounting)1
Condensate discharge 1/2˝
Water connections 1/2˝
1
2
Ext
erna
l mou
ntin
g
Inte
rnal
mou
ntin
g
Ext
erna
l mou
ntin
g
Inte
rnal
mou
ntin
g
506
550
2215
520
250
256
2801
Technical details
Tech
nica
l det
ails
Air/water heat exchangers
253Rittal System Climate Control
280
1515
255
385
920
950
36.5
235
250
25
250
400
345
350
Ø9.
5
920
950
250
400
Ø9.
5
4949
91 26
1515
950
400
21 14
0
20
400
50
50
140 140
Air/water heat exchangersWall mounting, useful cooling output 2000 W/3000 W Page 107
Exte
rnal
mou
ntin
g
Inte
rnal
mou
ntin
g
Mounting cut-out for external mounting
Mounting cut-out for internal mounting
Condensate discharge 1/2˝
Water connections 1/2˝
1
2
1400
1400
450
250
100
450
4080
12
1
250 250
Ø9.0
(4x)
1400
350
450
1513
65
492691 49
Wall mounting, useful cooling output 5000 W Page 108
Ext
erna
l mou
ntin
g
Inte
rnal
mou
ntin
g
Mounting cut-out for external mounting
Mounting cut-out for internal mounting
Condensate discharge 1/2˝
Water connections 1/2˝
1
2
455
455
455
350
433.5
Ø7.
0 (8
x)
1400
410
450
420
165
335
15
470
681.
5
Technical detailsTe
chni
cal d
etai
ls
Air/water heat exchangersWall-mounted, useful cooling output 7000 W Page 109
Adaptor framePage 109
450
Condensate discharge 1/2˝
Cooling water connection 1/2˝
1
2
417
Bolts M6 x 20
1
Air/water heat exchangers
254 Rittal System Climate Control
300
100
45018
00
80
21
451
Ø 8 (10x)
350
433.5
350
417
417
442.
5
230
145
442.
544
2.5
442.
5
530
30 15
1655
.1
1740
1800
400
442.
544
2.5
442.
5
400
442.
5
392
433.5
350
380
40
Ø 8 (10x)
1
Technical details
Tech
nica
l det
ails
Cold Plate
255Rittal System Climate Control
94.5 94.562 62 62 62 62
325
399
3737
475
499
272
50 55
1
18
2532
539
937
37
70.5 70.562 62 62 62 62 62 62 62 62
675
699
55
272 24
3
31
31
18
25
1
94.5 94.562 62 62 62 62
325
399
37
475
21
499
50
55575125
1
18
21
378
10.5
10.5
325
399
37
70.5 70.562 62 62 62 62 62 62 62 62
675
699
272 24
3
31
31
55
1
378
10.5
10.5
18
20
Cold PlatePage 112
Cooling water connection 1/4˝1
SK 8616.610, SK 8616.630 SK 8616.810, SK 8616.830
SK 8616.600, SK 8616.620 SK 8616.800, SK 8616.820
Tech
nica
l det
ails
Technical details
Recooling systems256 Rittal System Climate Control
Options for recooling systems
Pres
sure
-sea
led
syst
em
Ope
n sy
stem
with
tank
Des
igne
d a
s a
once
-thr
oug
h co
oler
with
out t
ank
Hot
gas
byp
ass
cont
rol i
n th
e co
olin
g c
ircui
t
Mor
e po
wer
ful p
ump(
s)
Hea
ter
in th
e ta
nk (1
000
W)
Wat
er le
vel s
witc
h
Flow
mon
itor
Wat
er fi
lter/
oil f
ilter
Wat
er-c
oole
d c
ond
ense
r
Ups
tream
pip
ewor
k, fr
ee fr
om n
on-fe
rrou
s m
etal
s
Aut
omat
ic ta
nk fi
lling
Faul
t sig
nal w
ith in
divi
dual
mes
sage
s
Am
bie
nt te
mp
erat
ure
cont
rol
Aut
omat
ic b
ypas
s
Man
ual b
ypas
s
Har
ting
conn
ecto
r
Out
doo
r siti
ng
Spec
ial s
pray
fini
sh
Spec
ial v
olta
ges
Met
al fi
lter m
at
Cas
tors
Ref
riger
ant R
134a
Dou
ble
pum
p un
it
Filte
r mat
mon
itorin
g
Bas
e tr
ay
Tank
(sta
inle
ss s
teel
1.4
301)
Add
ition
al m
ediu
m c
onne
ctio
ns
Recooling systems Mini and Mini for wall mounting
SK 3318.600 � – – – ▫ – – � – ▫ ▫ – – ▫ – – ▫ – ▫ ▫ ▫ ▫ � – � – – –SK 3318.610 – � – – ▫ – – � – ▫ ▫ – – ▫ – – ▫ – ▫ ▫ ▫ ▫ � – � – – –SK 3319.600 � – – – ▫ – – � – ▫ ▫ – – ▫ – – ▫ – ▫ ▫ ▫ ▫ � – � – – –SK 3319.610 – � – – ▫ – – � – ▫ ▫ – – ▫ – – ▫ – ▫ ▫ ▫ ▫ � – � – – –SK 3320.600 – � – ▫ ▫ – – � – ▫ ▫ – – ▫ ▫ ▫ ▫ – ▫ – ▫ ▫ � – � – – –SK 3334.600 – � – ▫ ▫ – – � – ▫ ▫ – – ▫ ▫ ▫ ▫ – ▫ – ▫ ▫ � – � – – –SK 3334.660 – � – ▫ ▫ – – � – ▫ ▫ – – ▫ ▫ ▫ ▫ – ▫ – ▫ ▫ � – � – – –SK 3360.100 – � – – ▫ – ▫ � – ▫ ▫ – – ▫ – ▫ ▫ – ▫ – ▫ – � – � – – –SK 3360.250 – � – – ▫ – ▫ � – ▫ ▫ – – ▫ – ▫ ▫ – ▫ – ▫ – � – � – – –SK 3360.470 – � – ▫ ▫ – ▫ � – ▫ ▫ – – ▫ – ▫ ▫ – ▫ – ▫ – � – � – – –Recooling systems in floor-standing enclosure and industrial enclosure
SK 3336.100 – � ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ � – – – � ▫ SK 3336.200 – � ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ � – – – � ▫ SK 3336.300 – � ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ � – – – � ▫ SK 3336.500 – � ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ � – – – � ▫ SK 3336.600 – � ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ � – – – � ▫ SK 3336.650 – � ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ – ▫ ▫ � – – – � ▫ SK 3336.700 – � ▫ ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ – – – – � ▫ SK 3336.710 – � ▫ ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ – – – – � ▫ SK 3336.720 – � ▫ ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ – – – – � ▫ SK 3336.730 – � ▫ ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ – – – – � ▫ SK 3336.740 – � ▫ ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ – – – – � ▫ SK 3336.750 – � ▫ ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ – – – – � ▫ SK 3339.100 – � ▫ ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ – – – – � ▫ SK 3339.200 – � ▫ ▫ ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ – – – – � ▫ Recooling systems in a floor standing enclosure for oil
SK 3337.200 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ ▫ ▫ ▫ � – – – ▫ ▫ SK 3337.300 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ ▫ ▫ ▫ � – – – ▫ ▫ SK 3337.500 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ ▫ ▫ ▫ � – – – ▫ ▫ SK 3337.600 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ ▫ ▫ ▫ � – – – ▫ ▫ SK 3337.650 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ – ▫ ▫ � – – – ▫ ▫ SK 3337.700 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ ▫ ▫ ▫ – – – – ▫ ▫ SK 3337.710 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ ▫ ▫ ▫ – – – – ▫ ▫ SK 3337.720 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ ▫ ▫ ▫ – – – – ▫ ▫ SK 3337.730 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ ▫ ▫ ▫ – – – – ▫ ▫ SK 3337.740 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ ▫ ▫ ▫ – – – – ▫ ▫ SK 3337.750 – ▫ � ▫ ▫ ▫ – ▫ ▫ – – – ▫ ▫ � – ▫ ▫ ▫ ▫ ▫ ▫ – – – – ▫ ▫ Recooling systems in the TS 8 Top enclosure system
SK 3335.060 – � – ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3335.075 – � – ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3335.100 – � – ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3335.120 – � – ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3335.150 – � – ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3335.200 – � – ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3335.250 – � – ▫ ▫ ▫ � ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫
� Standard ▫ Optional
Technical details
Tech
nica
l det
ails
Recooling systems
257Rittal System Climate Control
Options for recooling systems
Wat
er-c
oole
d c
ond
ense
r
Rad
ial f
an
Hot
gas
byp
ass
cont
rol i
n th
e co
olin
g c
ircui
t
Har
ting
con
nect
or
Spec
ial s
pray
fini
sh
Spec
ial v
olta
ges
Am
bie
nt te
mp
erat
ure
cont
rol
Con
trol v
olta
ge 2
4 V
DC
Liqu
id in
ject
ion
valv
e
Faul
t sig
nal “
Filte
r m
at d
irty”
Imm
ersi
on d
epth
650
mm
Imm
ersi
on d
epth
750
mm
Imm
ersi
on d
epth
850
mm
Imm
ersi
on d
epth
100
0 m
m
Immersible recooling systems
SK 3338.020 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.040 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.060 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.080 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.100 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.120 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.140 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.160 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.180 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.200 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.220 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.240 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.260 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.280 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.300 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.320 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.340 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.360 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.500 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.520 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.540 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.560 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.580 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.600 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.620 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.640 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.660 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.680 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.700 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.720 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.740 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.760 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.780 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.800 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.820 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ SK 3338.840 ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫ ▫
▫ Optional
Technical detailsTe
chni
cal d
etai
ls
Recooling systems
258 Rittal System Climate Control
Recooling systems for waterMini, cooling output 1/1.5 W Page 118 Key to the diagram opposite:
CompressorCondenserCondenser fanEvaporator coilExpansion valveFilter dryerFillingVent valveTemperature sensorPumpFlow monitorOverpressure valvePressure relief valve/alternatively tankHigh-pressure switch
5
25
20
35
50
55
61
45
15
1070
1
60
65
P
T
S
Layout diagram1
5
10
15
20
25
35
45
50
55
60
61
65
70 60 Hz
65 7 8 90
35
30
H
Q.
25
20
15
10
5
50 Hz
20.5 4 6 80
35
30
H
Q.
25
20
15
10
5
H = Delivery head H [m] Q = Delivery flow Q [l/min] .
Characteristic curves of pump Model No. SK 3318.600/3318.610/ 3319.600/3319.610
Note:With an externally lockable cooling cycle, a bypass (overpressure valve) should be provided in the external water pipes.
Mini, cooling output 3/4.5 kW Page 119
Mini, cooling output 6 kW Page 120 Key to the diagram opposite:
CompressorCondenserCondenser fanEvaporator coilExpansion valveFilter dryerTankFillingTank drainWater level switch, optionalTemperature sensorPumpFlow monitorHigh-pressure switch
55
4030
60
1
7010
15
5
35
46
50
20
25P
S
Layout diagram1
5
10
15
20
25
30
35
40
46
50
55
60
70
Note:With an externally lockable cooling cycle, a bypass (overpressure valve) should be provided in the external water pipes.
60 Hz
200 40 60 800
10
20
40
30
50
H
Q.
50 Hz
200 40 60 800
10
20
30
40
H
Q.
H = Delivery head H [m] Q = Delivery flow Q [l/min] .
Characteristic curves of pump Model No. SK 3320.600/3334.600/3334.660
Technical details
Tech
nica
l det
ails
Recooling systems
259Rittal System Climate Control
Characteristic curves of pumpModel No. SK 3234.090
Recooling systems for waterPower Fluid Cooler, cooling output 7.5 kW Page 121
Power Fluid Cooler, cooling output 10 to 59 kW Page 122Key to the diagram opposite:
CompressorCondenserCondenser fanEvaporator coilExpansion valveInspection glassMagnetic valveLiquid collectorFilter dryerTankManometerFillingTank drainLevel indicatorPumpFlow monitor (optional)High-pressure switchLow-pressure switchThermostatAnti-frost thermostat
Layout diagram
2022
21
25
23
553031
35
48
40
6015
80
71
705
1
10
81
1
5
10
15
20
21
22
23
25
30
31
35
40
48
55
60
70
71
80
81
50 Hz
200 40 60 800
10
20
30
40
H
Q.
Note:With an externally lockable cooling cycle, a bypass (overpressure valve) should be provided in the external water pipes.
Model No. SK 3234.130/.140/.150
50 Hz
4020 60 80 10018
H
Q.
20
22
24
26
28
30
32
34
36
Model No. SK 3234.160/.170
50 Hz
16014
H
Q.
16
18
20
22
24
26
50 140120958035
Model No. SK 3234.180/.190
50 Hz
25022
H
Q.
24
26
28
30
32
34
36
2101801601301109080
Model No. SK 3234.100/.110/.120
50 Hz
3520 50 65 8010
H
Q.
12
14
16
18
20
22
24
H = Delivery head H [m]Q = Delivery flow Q [l/min].
Technical detailsTe
chni
cal d
etai
ls
Recooling systems
260 Rittal System Climate Control
Recooling systems for waterIn floor-standing enclosure, cooling output 2.1 to 7.7 kW Page 123 Key to the diagram opposite:
CompressorCondenserCondenser fanMulti-coil vaporiserCapillary tube/expansion valve1)
Filter dryerTankManometerFillingTank drainLevel monitor/float-actuated switchLevel indicatorPumpHigh-pressure switch1) Thermostat
1) from SK 3336.500
5
10
25
35
40
48
19
553016 31
1
80
70P
46
Layout diagram1
5
10
16
19
25
30
31
35
40
46
48
55
70
80
Characteristic curve of pump Model No. SK 3336.100/3336.200/3336.300/ 3336.500/3336.600/3336.650
50 Hz
H
Q
20
0
25
30
35
3020 40 50 60.
H = Delivery head H [m] Q = Delivery flow Q [l/min] .
Note:With an externally lockable cooling cycle, a bypass (overpressure valve) should be provided in the external water pipes.
Characteristic curves of pump Model No. SK 3336.700/3336.710/3336.720
In floor-standing enclosure, cooling output 10 to 36 kW Page 124 Key to the diagram opposite:
CompressorCondenserCondenser fanEvaporator coilExpansion valveInspection glassMagnetic valveLiquid collectorFilter dryerTankManometerFillingTank drainLevel indicatorPumpFlow monitorHigh-pressure switchLow-pressure switchThermostat
2022
21
25
23
553031
35
48
40
6015
80
71
705
1
10
Layout diagram1
5
10
15
20
21
22
23
25
30
31
35
40
48
55
60
70
71
80
50 Hz
3520 50 65 80
H
Q
20
25
30
35
40
.
Model No. SK 3336.730/3336.740/3336.750
50 Hz
H
Q
26
.40 8020 60
38
36
34
32
30
28
H = Delivery head H [m] Q = Delivery flow Q [l/min] .
Note:With an externally lockable cooling cycle, a bypass (overpressure valve) should be provided in the external water pipes.
Technical details
Tech
nica
l det
ails
Recooling systems
261Rittal System Climate Control
Recooling systems for waterPower Fluid Cooler, cooling output 68 to 209 kW Page 125 Key to the diagram opposite:
Compressor with oil sump heaterDuo pressure monitor LP/HPCondenser with fanExpansion valveInspection glassMagnetic valveFilter dryerEvaporator coilFlow monitorThermostat Draining ManometerPumpReturn INInlet OUTTankFillingLevel indicatorTemperature sensor
2
10
3
6
78
9
1
4812
14
1718
19
20
68
9
7
3
2
1
21
35 50
13
Layout diagram1
2
3
6
7
8
9
10
12
13
14
17
18
19
20
21
35
48
50
Characteristic curves of pump Model No. SK 3234.200/.210/.220/.230
50 Hz
40014
H
Q.
161820222426283032343638
300250200150100
50 Hz
80012
H
Q.
14161820222426283032
250 700600500400300
50 Hz
80020
H
Q.
222426283032343638404244
700600500400300250
H = Delivery head H [m] Q = Delivery flow Q [l/min] .
Note:With an externally lockable cooling cycle, a bypass (overpressure valve) should be provided in the external water pipes.
Model No. SK 3234.240/.250/.260/.270
Model No. SK 3234.280
Technical detailsTe
chni
cal d
etai
ls
Recooling systems
262 Rittal System Climate Control
Recooling systems for waterPower Fluid Cooler, cooling output 271 to 502 kW Page 126 Key to the diagram opposite:
Compressor with oil sump heaterDuo pressure monitor LP/HPCondenser with fanExpansion valveInspection glassMagnetic valveFilter dryerEvaporator coilSafety assemblyFlow monitorThermostat Draining/fillingPressure relief valveManometerPumpReturn INInlet OUTTank
2
10
3
6
78
9
1
1112
14
15
17
19
2021
68
9
7
3
2
1
FC 18
13
Layout diagram1
2
3
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
Characteristic curves of pump Model No. SK 3234.290/.300/.310
50 Hz
80028
H
Q.
303234363840424446485052
700600500400300250
50 Hz
140028
H
Q.
303234363840424446485052
12001000800700600500
H = Delivery head H [m] Q = Delivery flow Q [l/min] .
Note:With an externally lockable cooling cycle, a bypass (overpressure valve) should be provided in the external water pipes.
Model No. SK 3234.320/.330/.340
Technical details
Tech
nica
l det
ails
Recooling systems
263Rittal System Climate Control
Recooling systems for waterIn TS 8 Top enclosure system, cooling output 6/7.5 kW Page 127 Key to the diagram opposite:
CompressorCondenserCondenser fanMulti-coil vaporiserExpansion valveInspection glassLiquid collectorFilter dryerTankManometerFixed pump bypassFillingTank drainLevel switchPumpHigh-pressure switchThermostat
333516
47
70
201
80
31
5540
30
21
23
25
10
5
Layout diagram1
5
10
16
20
21
23
25
30
31
33
35
40
47
55
70
80
Characteristic curve of pump Model No. SK 3335.060/3335.075
50 Hz
H = Delivery head H [m]Q = Delivery flow Q [l/min]
3020 40 50 60
H
Q
12
16
20
24
28
.
.
In TS 8 Top enclosure system, cooling output 10 to 25 kW Page 128 Key to the diagram opposite:
CompressorCondenserCondenser fanMulti-coil vaporiserExpansion valveInspection glassLiquid collectorFilter dryerTankManometerFixed pump bypassFillingTank drainLevel switchPumpHigh-pressure switchThermostat
333516
47
70
201
80
31
5540
30
21
23
25
10
5
Layout diagram1
5
10
16
20
21
23
25
30
31
33
35
40
47
55
70
80
Characteristic curves of pump Model No. SK 3335.100/3335.120/3335.150
50 Hz
6030 90 120 150
H
Q
20
26
32
38
44
50
.
50 Hz
2010 30 40 5016
44
40
H
Q.
36
32
28
24
20
H = Delivery head H [m] Q = Delivery flow Q [l/min] .
Model No. SK 3335.200/3335.250
Technical detailsTe
chni
cal d
etai
ls
Recooling systems
264 Rittal System Climate Control
Recooling systems for waterMini, for wall mounting, cooling output 1/2.5/4 kW Page 129 Key to the diagram opposite:
CompressorCondenserCondenser fanEvaporator coilExpansion valveFilter dryerTankFillingTank drainWater level switch, optionalTemperature sensorPumpFlow monitorHigh-pressure switch
5
15
10
1
70
60
55
35
4030
50
46
25
20
P
S
Layout diagram1
5
10
15
20
25
30
35
40
46
50
55
60
70
Characteristic curves of pump Model No. SK 3360.100/3360.250/3360.470
50 Hz
H
Q
0
10
20
30
100 20 30 40.
60 Hz
H
Q
0
10
20
30
40
100 20 30 40.
H = Delivery head H [m] Q = Delivery flow Q [l/min] .
Note:With an externally lockable cooling cycle, a bypass (overpressure valve) should be provided in the external water pipes.
Technical details
Tech
nica
l det
ails
Recooling systems
265Rittal System Climate Control
Recooling systems for oilIn floor-standing enclosure, cooling output 2.5 to 8 kW Page 130 Key to the diagram opposite:
Compressor Automatic bypass valveCondenser Oil pumpCondenser fan Motor for oil pumpEvaporator coil High-pressure switch1) Capillary tube/expansion valve1) ThermostatFilter dryer Anti-frost thermostatManometer
1) from SK 3337.500
5
180
31 56
3257
8119
25
15
10
70P
Layout diagram1 32
5 56
10 57
15 70
19 80
25 81
31
In floor-standing enclosure, cooling output 11 to 26 kW Page 131 Key to the diagram opposite:
Compressor ManometerCondenser Automatic bypass valveCondenser fan Oil pumpEvaporator coil Motor for oil pumpExpansion valve High-pressure switchInspection glass Low-pressure switchMagnetic valve ThermostatLiquid collector Anti-frost thermostatFilter dryer
31
152022
21
25
23
81
1
70
80
71
56
5732
5
10
M
Layout diagram1 31
5 32
10 56
15 57
20 70
21 71
22 80
23 81
25
Immersible recooling systems for oil/emulsion2.4 – 78 kW cooling output Page 132 – 134
Key to the diagram opposite:
CompressorCondenserCondenser fanEvaporator coilExpansion valveInspection glassMagnetic valveLiquid collector
Layout diagram
5
80
70
1
71
30
5082
10
15
23
21
25
2022
1
5
10
15
20
21
22
23
Filter dryerTank, to be supplied by the customerTemperature sensorHigh-pressure switchLow-pressure switchThermostatStirrer
25
30
50
70
71
80
82
Technical detailsTe
chni
cal d
etai
ls
Recooling systems for IT cooling
266 Rittal System Climate Control
Recooling systems for IT cooling15 – 123 kW cooling output Page 148 Key to the diagram opposite:
Compressor with oil sump heaterDuo pressure monitor LP/HPCondenser with fanNon-return valvePressure sensorExpansion valveInspection glassMagnetic valveFilter dryerEvaporator coilSafety assemblyFlow monitorThermostatDraining/fillingPressure relief valveBypass valveManometerPumpReturn INInlet OUTTankRefrigerant collector
2
10
4
6
78
5
9
1
1112
13
14
15 16
17
18
19
2021
22
4
5
3
Controller
FU
FU
PA
PA
FC PI
Layout diagram
2
10
3
4
6
78
5
9
1
1112
13
14
1516
17
18
19
2021
FU
PA
PA
FU
68
9
7
3
2
1
Controller
PI
4 5
FC
Layout diagram
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Cooling output 145 to 462 kW Page 149 Key to the diagram opposite:
Compressor with oil sump heaterDuo pressure monitor LP/HPCondenser with fanNon-return valvePressure sensorExpansion valveInspection glassMagnetic valveFilter dryerEvaporator coilSafety assemblyFlow monitorThermostatDraining/fillingPressure relief valveBypass valveManometerPumpReturn INInlet OUTTank
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Technical details
2 420
21
Water/water heat exchangersPage 153
Layout diagram
Key to the diagram opposite:
Temperature sensorPressure transmitterDifferential pressure monitoringFlow gaugeExtension tankSpeed controlled pumpNon-return valveSafety valveAutomatic bleed systemShut-off valveWater filter3-way valvePlate-type heat exchangerPressure reduction valve
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
1
1
1
1
2
2
2
2
2
2
2
2
2
Automatic bypass valveEmergency water supply heat exchangerWater tankMagnetic filterStandard pumpCustomer Rittal Emergency water supply onPrimary on (onsite)Primary offSecondary on (LCP)Secondary offFillingEmergency water supply off
5
6
7
8
9
0
1
2
3
4
5
6
7
8
tails
Enclosure heatersContinuous thermal output 10 – 800 W Page 169
With fanWithout fan
Without fanModel No. SK W (B) mm H mm D (T) mm
3105.110 81 123 493106.120 81 173 49
de
l
BTech
nica
Water/water heat exchangers/enclosure heaters
267Rittal System Climate Control
Option E
Option D
Option COption B
Opt
ion
A
14
1
1
1
1
2 4
2
2
2
2
3
3
5
7
7
7
8
15
9
9
10 10
10 10
10
10
10
10
10
10 10
10 10
1010
10
10
10
12
10
13
16
17
18
11 + 18
6 + 19
28
22
23
24
25
27
26
11
M
H
T
With fan
3115.130 102 155 603116.140 102 225 603107.150 102 260 603107.160 140 205 803102.170 140 250 80
Model No. SK W (B) mm H mm D (T) mm 3105.210 142 170 1013105.220 142 170 1013105.230 142 170 1013105.180 142 170 1013105.190 142 170 1013105.200 142 170 101
B
T
H
Technical detailsTe
chni
cal d
etai
ls
Electronic condensate evaporatorPage 192
SK 3301.560/.580 SK 3301.570/.590
258Ø
378Condensate hose SK 3301.608 for SK 3302.XXX SK 3301.610 for SK 3303.XXX
Suggestion for position of cable entry
Hose Length as required
1
2
3
Condensate hose SK 3301.612
Suggestion for position of cable entry
Hose Length as required
1
2
3
Integrated louvresPage 183
SK 2541.235 SK 2542.235 SK 2543.235
System accessories
268 Rittal System Climate Control
125
132.
5
42 6
280 400
125
42
132.
5
Ø 6
Ø 6
258
75
5025
1
32
378
45
6025
Ø 6 1
3
2
B
A
140
100
160
50 110
90
4.5
10
1.5
8
10
150
210
190
80 40 100
B
A
1.5
8
4.5
10
4.5
270
330
310
50 110
90
B
A
1.5
8
Rittal System Climate Control
Notes
269
Not
es
Overview of products and approvals
Cooling with ambient air from page 272Fan-and-filter units ..........................................................................272EMC fan-and-filter units ..................................................................273Rack-mounted fans ........................................................................273Vario rack-mounted fans .................................................................274
Tangential fans ...............................................................................274RTT roof-mounted fan and vent attachment for TS.........................274Roof-mounted fans .........................................................................275Air/air heat exchangers...................................................................276
Cooling units from page 277Cooling modules .............................................................................277Section doors ..................................................................................277Roof-mounted cooling units ............................................................278
Wall-mounted cooling units ...........................................................279Thermoelectric coolers ...................................................................284
Liquid cooling IE from page 284Air/water heat exchangers, roof-mounted .....................................284Air/water heat exchangers, wall-mounted .....................................284Direct Cooling Package .................................................................286
Recooling systems for water ..........................................................287Recooling systems for oil ................................................................290Immersible recooling systems for oil ..............................................290Immersible recooling systems for emulsion ...................................291
Liquid cooling IT from page 292CRAC systems................................................................................292Aisle containment............................................................................293Liquid Cooling Package..................................................................293
Chillers for IT cooling ......................................................................295Water/water heat exchangers.........................................................295
pro
vals
Outdoor climate control from page 296Cooling units for CS modular enclosures .......................................296Heat exchangers for CS modular enclosures.................................296
Climate control units for Toptec CR................................................297
of p
rod
uct
s an
d a
p
Enclosure heaters from page 297Enclosure heaters ..........................................................................297
271Rittal System Climate Control
Ove
rvie
w
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
Overview of products and a
pprovals272 Rittal System Climate Control
System climate control creates the correct ambient conditions for every application, particularly for sensitive electronics. A broad selection of cooling units, recooling systems, heat exchangers, fan-and-filter units and enclosure heaters protects against adverse physical and thermal influences. This is supplemented by a versatile range of accessory components.
With a full advisory service and its PC software package Rittal Therm, Rittal will help you to select the correct climate control unit to optimally suit your requirements.
Enhanced operational reliability and a longer service life for electronics ● Cooling with ambient air● Cooling units● Liquid cooling IE● Liquid cooling IT● Outdoor climate control● Enclosure heaters
Detailed information may be found on pages 41 – 169 and on our website at www.rittal.com
The latest status of approvals may be found on our website at: www.rittal.com
Fan-and-filter units Air throughput
unimpeded air flowVoltage V, Hz
Model No. SK RAL 7035
ApprovalsPage
UL CUL DIN GS CSA
20/25 m3/h230, 50/60 3321.107 � � 44 115, 50/60 3321.117 � � 44
20 m3/h24 (DC) 3321.027 � � 44 48 (DC) 3321.0471) � � 44
55/66 m3/h230, 50/60 3322.107 � � � 44 115, 50/60 3322.117 � � � 44
55 m3/h24 (DC) 3322.027 � � � 44 48 (DC) 3322.0471) � � 44
105/120 m3/h230, 50/60 3323.107 � � � 45 115, 50/60 3323.117 � � � 45
105 m3/h24 (DC) 3323.027 � � � 45 48 (DC) 3323.0471) � � 45
180/160 m3/h230, 50/60 3324.107 � � � 45 115, 50/60 3324.117 � � � 45
180 m3/h24 (DC) 3324.027 � � � 45 48 (DC) 3324.0471) � � 45
230/265 m3/h230, 50/60 3325.107 � � � 46 115, 50/60 3325.117 � � � 46
230 m3/h24 (DC) 3325.027 � � � 46 48 (DC) 3325.0471) � � 46
550/600 m3/h230, 50/60 3326.107 � � � 47 115, 50/60 3326.117 � � � 47
700/720 m3/h230, 50/60 3327.107 � � 47 115, 50/60 3327.117 � � 47
400/460, 3~, 50/60 3327.147 � � 47 1) Delivery times available on request.
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
273Rittal System Climate Control
Fan-and-filter units – EMCAir throughput
unimpeded air flowVoltage V, Hz
Model No. SK RAL 7035
ApprovalsPage
UL CUL DIN GS CSA
20/25 m3/h230, 50/60 3321.607 � � 48 115, 50/60 3321.6171) � � 48
55/66 m3/h230, 50/60 3322.607 � � 48 115, 50/60 3322.6171) � � 48
105/120 m3/h230, 50/60 3323.607 � � � 48 115, 50/60 3323.6171) � � � 48
180/160 m3/h230, 50/60 3324.607 � � � 49 115, 50/60 3324.6171) � � � 49
230/265 m3/h230, 50/60 3325.607 � � � 49 115, 50/60 3325.617 � � � 49
550/600 m3/h230, 50/60 3326.607 � � 49 115, 50/60 3326.6171) � � 49
700/720 m3/h230, 50/60 3327.607 � � 49 115, 50/60 3327.6171) � � 49
1) Delivery times available on request.
Rack-mounted fans Air
throughput unimpeded
air flow
No. of fans
Distance between
axes mm
Voltage V, Hz
Model No. SK
Approvals
PageUL CUL DIN GS VDE
250 m3/h 3 85 36 (DC) – 72 (DC) 9769.0021) 52
320 m3/h2 85 24 (DC) 3340.0241) � � � 52 2 85 115 (AC), 50/60 3340.1151) � � � 52 2 85 230 (AC), 50/60 3340.230 � � � 52
480 m3/h
3 85 24 (DC) 3341.0241) � � � 52 3 105 24 (DC) 3342.024 � � � 52 3 85 115 (AC), 50/60 3341.115 � � � 52 3 105 115 (AC), 50/60 3342.1151) � � � 52 3 85 230 (AC), 50/60 3341.230 � � � 52 3 105 230 (AC), 50/60 3342.230 � � � 52
3 10524 (DC)
115 – 230 (AC), 50/60
3342.500 � � � 52
1) Delivery times available on request.
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
274 Rittal System Climate Control
Vario rack-mounted fanAir
throughput unimpeded
air flow
No. of fans
Distance between
axes mm
Voltage V, Hz
Model No. SK
Approvals
PageUL CUL DIN GS VDE
320 m3/h2 85 24 (DC) 3350.0241) � � � 52 2 85 115 (AC), 50/60 3350.1151) � � � 52 2 85 230 (AC), 50/60 3350.2301) � � � 52
480 m3/h
3 85 24 (DC) 3351.0241) � � � 52 3 105 24 (DC) 3352.0241) � � � 52 3 85 115 (AC), 50/60 3351.1151) � � � 52 3 105 115 (AC), 50/60 3352.1151) � � � 52 3 85 230 (AC), 50/60 3351.230 � � � 52 3 105 230 (AC), 50/60 3352.230 � � � 52
3 10524 (DC)
115 – 230 (AC), 50/60
3352.500 � � � 52
1) Delivery times available on request.
Tangential fansAir throughput
unimpeded air flow
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
320 m3/h 482.6 x 87.2 x 158115, 50/60 3145.000 53 230, 50/60 3144.000 53
RTT roof-mounted fan and vent attachment for TS
Air throughput unimpeded
air flow
Voltage V, Hz
Required mounting cut-out
W x D mm
Model No. SK
Approvals
PageUL CUL DIN GS CSA
400 m3/h
115, 50/60 475 x 260 3149.410 54 230, 50/60 475 x 260 3149.420 54
400, 3~, 50/60 460, 3~, 60 475 x 260 3149.440 54
800 m3/h
115, 50/60 475 x 260 3149.810 54 230, 50/60 475 x 260 3149.820 54
400, 3~, 50/60 460, 3~, 60 475 x 260 3149.840 54
Without motor 490 x 390 8801.380 54
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
275Rittal System Climate Control
Roof-mounted fans Air throughput
unimpeded air flow
Voltage V, Hz
Required mounting cut-out
W x D mmModel No. SK
ApprovalsPage
UL CUL DIN GS CSA
360 m3/h230, 50/60 345 x 265 3149.007 54 115, 50/60 345 x 265 3169.007 54
Without fan motor 345 x 265 3148.007 54
For TS/FR(i) for the office sector
Air throughput unimpeded
air flow
Voltage V, Hz
DesignDimensions W x H x D
mm
Model No. SK
Approvals
Pagewith roof plate
without roof plate
UL CUL DIN GS CSA
1500 m3/h115, 50/60 � 800 x 240 x 800 3164.610 55 230, 50/60 � 800 x 240 x 800 3164.620 55
1500 m3/h115, 50/60 � 800 x 240 x 900 3164.810 55 230, 50/60 � 800 x 240 x 900 3164.820 55
1500 m3/h115, 50/60 � 511 x 227 x 511 3164.115 55 230, 50/60 � 511 x 227 x 511 3164.230 55
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
276 Rittal System Climate Control
TopTherm air/air heat exchangersWall-mounted, with controller
Air/air heat exchangersWall-mounted
Wall-mounted, railway-compatible version
Roof-mounted
Specific thermal output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
17.5 W/K 280 x 550 x 150 230, 50/60 3126.100 � � 63 17.5 W/K 280 x 550 x 150 115, 50/60 3126.115 � � 63 30.0 W/K 400 x 950 x 205 230, 50/60 3127.100 � � 63 30.0 W/K 400 x 950 x 205 115, 50/60 3127.115 � � 63 45.0 W/K 400 x 950 x 225 230, 50/60 3128.100 � � 63 45.0 W/K 400 x 950 x 225 115, 50/60 3128.115 � � 63 60.0 W/K 400 x 950 x 225 230, 50/60 3129.100 � � 63 60.0 W/K 400 x 950 x 225 115, 50/60 3129.115 � � 63 90.0 W/K 400 x 1580 x 215 230, 50/60 3130.100 � � 63 90.0 W/K 400 x 1580 x 215 115, 50/60 3130.115 � � 63
Specific thermal output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
12.0 W/K 200 x 400 x 146 230, 50/60 3125.800 62 62.0 W/K 400 x 1360 x 110 230, 50/60 3129.800 62
Specific thermal output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
27.0 W/K 280 x 650 x 127 24 V (DC) 3126.424 64 27.0 W/K 280 x 650 x 127 110 V (DC) 3126.410 64 47.0 W/K 400 x 950 x 140 24 V (DC) 3128.424 64 47.0 W/K 400 x 950 x 140 110 V (DC) 3128.410 64 66.0 W/K 400 x 950 x 150 24 V (DC) 3129.424 64 66.0 W/K 400 x 950 x 150 110 V (DC) 3129.410 64 98.0 W/K 400 x 1580 x 150 24 V (DC) 3130.424 64 98.0 W/K 400 x 1580 x 150 110 V (DC) 3130.410 64
Specific thermal output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
66.0 W/K 595 x 362 x 440 230, 50/60 3248.000 65
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
277Rittal System Climate Control
Cooling modules
Section doorsfor installing cooling modules
Useful cooling output Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
1500 W230, 1~, 50/60 3307.700 70 115, 1~, 50/60 3307.710 70
400/460, 3~, 50/60 3307.740 70
2500 W230, 1~, 50/60 3310.700 70 115, 1~, 50/60 3310.710 70
400/460, 3~, 50/60 3310.740 70
For enclosure dimensions W x H mm Model No. SK
ApprovalsPage
UL CUL DIN GS600 x 1800 3300.040 71 600 x 2000 3300.050 71 800 x 1800 3300.060 71 800 x 2000 3300.070 71
12001) x 1800 3300.080 71 12001) x 2000 3300.090 71 12002) x 1800 3300.110 71 12002) x 2000 3300.120 71
1) Unit positioned on the left 2) Unit positioned on the right
TopTherm roof-mounted cooling units Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS CSA
500 W 597 x 417 x 380230, 50/60 3382.100 3382.500 � � � � 74 115, 50/60 3382.110 3382.510 � � � � 74
750 W 597 x 417 x 380230, 50/60 3359.100 3359.500 � � 74 115, 50/60 3359.110 3359.510 � � 74
400, 2~, 50/60 3359.140 3359.540 � � 74
1000 W 597 x 417 x 475230, 50/60 3383.100 3383.500 � � � � 75 115, 50/60 3383.110 3383.510 � � � � 75
400, 2~, 50/60 3383.140 3383.540 � � � � 75
1500 W 597 x 417 x 475230, 50/60 3384.100 3384.500 � � � � 77 115, 50/60 3384.110 3384.510 � � � � 77
400, 2~, 50/60 3384.140 3384.540 � � � � 77
2000 W 597 x 417 x 475230, 50/60 3385.100 3385.500 � � � � 77 115, 50/60 3385.110 3385.510 � � � � 77
400, 2~, 50/60 3385.140 3385.540 � � � � 77
3000 W 796 x 470 x 580 400, 3~, 50 460, 3~, 60 3386.140 3386.540 � � � � 78
4000 W 796 x 470 x 580 400, 3~, 50 460, 3~, 60 3387.140 3387.540 � � � � 78
Roof-mounted cooling units in stainless steel version, see page 278. Delivery times available on request.
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
278 Rittal System Climate Control
TopTherm roof-mounted cooling unitsfor the office sector
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
1100 W 597 x 417 x 475115, 50/60 3273.5151) 76 230, 50/60 3273.500 76
3000 W 597 x 417 x 895 230, 50/60 3301.800 76 1) Delivery times available on request.
Stainless steel
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS CSA
500 W 597 x 415 x 380
230, 50/60 3382.200 3382.600 � 74 115, 50/60 3382.210 3382.610 � 74
750 W 597 x 415 x 380
230, 50/60 3359.200 3359.600 � � 74 115, 50/60 3359.210 3359.610 � � 74
400, 2~, 50/60 3359.240 3359.640 � � 74
1000 W 597 x 417 x 475
230, 50/60 3383.200 3383.600 � � � 75 115, 50/60 3383.210 3383.610 � � � 75
400, 2~, 50/60 3383.240 3383.640 � � � 75
1500 W 597 x 417 x 475
230, 50/60 3384.200 3384.600 � � � 77 115, 50/60 3384.210 3384.610 � � � 77
400, 2~, 50/60 3384.240 3384.640 � � � 77
2000 W 597 x 417 x 475
230, 50/60 3385.200 3385.600 � � � 77 115, 50/60 3385.210 3385.610 � � � 77
400, 2~, 50/60 3385.240 3385.640 � � � 77
3000 W 796 x 470 x 580
400, 3~, 50 460, 3~, 60 3386.240 3386.640 � � � 78
4000 W 796 x 470 x 580
400, 3~, 50 460, 3~, 60 3387.240 3387.640 � � � 78
Delivery times available on request.
With CO2 as the coolant
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPage
with Basic controller UL CUL DIN GS
1000 W 597 x 417 x 475 230, 50/60 3383.740 79 Delivery times available on request.
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
Wall-mounted cooling units VIP small cooling units
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Condenser version Model No. SK
ApprovalsPage
UL CUL DIN GS
225 W 526 x 353.5 x 105 230, 50/60
Left 3201.100 � � 82 Right 3202.100 � � 82
TopTherm wall-mounted cooling unitsMini cooling unit, in horizontal format
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS CSA
300 W 525 x 340 x 153230, 50/60 3302.300 � � � 83
115, 60 3302.310 � � 83
279Rittal System Climate Control
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
TopTherm wall-mounted cooling units Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS CSA
300 W 280 x 550 x 140
230, 50/60 3302.100 – � � � � 84 115, 60 3302.110 – � � � � 84
500 W 280 x 550 x 210
230, 50/60 3303.100 3303.500 � � � � 84 115, 60 3303.110 3303.510 � � � � 84
750 W 280 x 550 x 280
230, 50/60 3361.100 3361.500 � � � 85 115, 60 3361.110 3361.510 � � � 85
400, 2~, 50/60 3361.140 3361.540 � � � 85
1000 W 400 x 950 x 260
230, 50/60 3304.100 3304.500 � � � � 87 115, 50/60 3304.110 3304.510 � � � � 87 400, 3~, 50 460, 3~, 60 3304.140 3304.540 � � � � 87
1500 W 400 x 950 x 260
230, 50/60 3305.100 3305.500 � � � � 87 115, 50/60 3305.110 3305.510 � � � � 87 400, 3~, 50 460, 3~, 60 3305.140 3305.540 � � � � 87
2000 W 400 x 1580 x 295
230, 50/60 3328.100 3328.500 � � � � 89 115, 50/60 3328.110 3328.510 � � � � 89 400, 3~, 50 460, 3~, 60 3328.140 3328.540 � � � � 89
2500 W 400 x 1580 x 295
230, 50/60 3329.100 3329.500 � � � � 89 115, 50/60 3329.110 3329.510 � � � � 89 400, 3~, 50 460, 3~, 60 3329.140 3329.540 � � � � 89
4000 W 500 x 1580 x 340
400, 3~, 50 460, 3~, 60 3332.140 3332.540 � � � � 90
TopTherm wall-mounted cooling units in stainless steel version, see page 281.
Cool Efficiency, up to 45% less energy consumption
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS CSA
1000 W 400 x 950 x 260 230, 1~, 50
3304.700 – 86 – 3304.800 86
280 Rittal System Climate Control
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
TopTherm wall-mounted cooling unitsStainless steel
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS CSA
300 W 280 x 550 x 140
230, 50/60 3302.200 – � � � 84 115, 60 3302.210 – � � � 84
500 W 280 x 550 x 210
230, 50/60 3303.200 3303.600 � � � 84 115, 60 3303.210 3303.610 � � � 84
750 W 280 x 550 x 280
230, 50/60 3361.200 3361.600 � � � 85 115, 60 3361.210 3361.610 � � � 85
400, 2~, 50/60 3361.240 3361.640 � � � 85
1000 W 400 x 950 x 260
230, 50/60 3304.200 3304.600 � � � 87 115, 50/60 3304.210 3304.610 � � � 87 400, 3~, 50 460, 3~, 60 3304.240 3304.640 � � � 87
1500 W 400 x 950 x 260
230, 50/60 3305.200 3305.600 � � � 87 115, 50/60 3305.210 3305.610 � � � 87 400, 3~, 50 460, 3~, 60 3305.240 3305.640 � � � 87
2000 W 400 x 1580 x 290
230, 50/60 3328.200 3328.600 � � � 89 115, 50/60 3328.210 3328.610 � � � 89 400, 3~, 50 460, 3~, 60 3328.240 3328.640 � � � 89
2500 W 400 x 1580 x 295
230, 50/60 3329.200 3329.600 � � � 89 115, 50/60 3329.210 3329.610 � � � 89 400, 3~, 50 460, 3~, 60 3329.240 3329.640 � � � 89
4000 W 500 x 1580 x 340
400, 3~, 50 460, 3~, 60 3332.240 3332.640 � � � 90
Delivery times available on request.
Slimline
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS CSA
1500 W 435 x 1590 x 165
230, 50/60 3377.1001) 3377.5001) � � � 88 115, 50/60 3377.1101) 3377.5101) � � � 88
400/460, 3~, 50/60 3377.1401) 3377.5401) � 88
1500 W 450 x 1590 x 205
230, 50/60 3366.100 3366.500 � � � 88 115, 50/60 3366.110 3366.510 � � � 88
400/460, 3~, 50/60 3366.140 3366.540 � 88
1) Delivery times available on request.
281Rittal System Climate Control
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
282 Rittal System Climate Control
TopTherm wall-mounted cooling unitsSlimline, stainless steel
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS CSA
1500 W 450 x 1590 x 165
230, 50/60 3377.200 3377.600 � � � 88 115, 50/60 3377.210 3377.610 � � � 88
400/460, 3~, 50/60 3377.240 3377.640 � 88
1500 W 450 x 1590 x 205
230, 50/60 3366.200 3366.600 � � � 88 115, 50/60 3366.210 3366.610 � � � 88
400/460, 3~, 50/60 3366.240 3366.640 � 88
Delivery times available on request.
Nema 4x design
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS CSA
500 W 285 x 620 x 298230, 50/60 3303.104 3303.504 � � � 91 115, 50/60 3303.114 3303.514 � � � 91
1000 W 405 x 1020 x 358
230, 50/60 3304.104 3304.504 � � � 91 115, 50/60 3304.114 3304.514 � � � 91 400, 3~, 50 460, 3~, 60 3304.144 3304.544 � � � 91
1500 W 405 x 1020 x 358
230, 50/60 3305.104 3305.504 � � � 91 115, 50/60 3305.114 3305.514 � � � 91 400, 3~, 50 460, 3~, 60 3305.144 3305.544 � � � 91
2000 W 405 x 1650 x 388
230, 50/60 3328.104 3328.504 � � � 92 115, 50/60 3328.114 3328.514 � � � 92 400, 3~, 50 460, 3~, 60 3328.144 3328.544 � � � 92
2500 W 405 x 1650 x 388
230, 50/60 3329.104 3329.504 � � � 92 115, 50/60 3329.114 3329.514 � � � 92 400, 3~, 50 460, 3~, 60 3329.144 3329.544 � � � 92
Delivery times available on request.
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
283Rittal System Climate Control
TopTherm wall-mounted cooling unitsfor machine tools
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS
1000 W 400 x 950 x 260
400, 3~, 50 460, 3~, 60 3304.142 3304.542 93
1500 W 400 x 950 x 260
400, 3~, 50 460, 3~, 60 3305.142 3305.542 93
Delivery times available on request.
Zone 22 (dust) explosion-proof cooling units
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS
1000 W 400 x 950 x 260
230, 50/60 3304.130 3304.530 94 400, 3~, 50/60 3304.160 3304.560 94
1500 W 400 x 950 x 260
230, 50/60 3305.130 3305.530 94 400, 3~, 50/60 3305.160 3305.560 94
Delivery times available on request.
With CO2 as the coolant
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPage
with Basic controller UL CUL DIN GS
1000 W 460 x 950 x 260 230, 50/60 3304.740 95 Delivery times available on request.
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
284 Rittal System Climate Control
Thermoelectric coolers Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS CSA
100 W 125 x 400 x 15590 – 264 V (AC) 3201.200 97
24 V (DC) 3201.300 97
TopTherm air/water heat exchangers Roof mounting with Basic/Comfort controller
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPagewith Basic
controllerwith Comfort
controller UL CUL DIN GS
1875 W2) 597 x 415 x 475230, 50/60 3209.1041) 3209.5041) 102 115, 50/60 3209.1141) 3209.5141) 102
400, 2~, 50/60 3209.1441) 3209.5441) 102
2500 W3) 597 x 415 x 475230, 50/60 3209.100 3209.500 � � 102 115, 50/60 3209.110 3209.510 � � 102
400, 2~, 50/60 3209.1401) 3209.5401) � � 102
3000 W2) 597 x 415 x 475230, 50/60 3210.1041) 3210.5041) 103 115, 50/60 3210.1141) 3210.5141) 103
400, 2~, 50/60 3210.1441) 3210.5441) 103
4000 W3) 597 x 415 x 475230, 50/60 3210.100 3210.500 � � 103 115, 50/60 3210.110 3210.510 � � 103
400, 2~, 50/60 3210.1401) 3210.5401) � � 103 1) Delivery times available on request. 2) All water-carrying parts made from stainless steel V4A (1.4571)3) All water-carrying parts made from CuAl
Air/water heat exchangers Micro, for wall mounting
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
300 W 150 x 300 x 85230, 50/60 3212.230 104 115, 50/60 3212.1151) 104 24 V (DC) 3212.024 104
1) Delivery times available on request.
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
285Rittal System Climate Control
Air/water heat exchangers Wall mounting with thermostat-controlled magnetic valve
Wall mounting with Basic/Comfort controller
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK ApprovalsPage
Wall mounting UL CUL DIN GS
600 W 200 x 500 x 100 230, 50/60 3214.100 � � 105 1250 W 200 x 950 x 100 230, 50/60 3215.100 105
7000 W 450 x 1800 x 300 400, 3~, 50/60480, 3~, 60 3216.4801) 109
1) Delivery times available on request.
Useful cooling output
Water-carrying parts Dimensions
W x H x D mm
Rated operating voltage V, Hz
Model No. SK ApprovalsPage
V4A (1.4571) CuAL with Basic
controllerwith Comfort
controller UL CUL DIN GS
375 W � 280 x 550 x 92230, 1~, 50/60 3363.1041) 3363.5041) 106 115, 1~, 50/60 3363.1141) 3363.5141) 106 400, 2~, 50/60 3363.1441) 3363.5441) 106
500 W � 280 x 550 x 92230, 1~, 50/60 3363.100 3363.500 � � 106 115, 1~, 50/60 3363.1101) 3363.5101) � � 106 400, 2~, 50/60 3363.1401) 3363.5401) � � 106
750 W � 280 x 550 x 142230, 1~, 50/60 3364.1041) 3364.5041) 106 115, 1~, 50/60 3364.1141) 3364.5141) 106 400, 2~, 50/60 3364.1441) 3364.5441) 106
1000 W � 280 x 550 x 142230, 1~, 50/60 3364.100 3364.500 � � 106 115, 1~, 50/60 3364.1101) 3364.5101) � � 106 400, 2~, 50/60 3364.1401) 3364.5401) � � 106
1500 W � 400 x 950 x 142230, 1~, 50/60 3373.1041) 3373.5041) 107 115, 1~, 50/60 3373.1141) 3373.5141) 107 400, 2~, 50/60 3373.1441) 3373.5441) 107
2000 W � 400 x 950 x 142230, 1~, 50/60 3373.100 3373.500 � � 107 115, 1~, 50/60 3373.1101) 3373.5101) � � 107 400, 2~, 50/60 3373.1401) 3373.5401) � � 107
2250 W � 400 x 950 x 142230, 1~, 50/60 3374.1041) 3374.5041) 107 115, 1~, 50/60 3374.1141) 3374.5141) � � 107 400, 2~, 50/60 3374.1441) 3374.5441) 107
3000 W � 400 x 950 x 142230, 1~, 50/60 3374.100 3374.500 � � 107 115, 1~, 50/60 3374.1101) 3374.5101) � � 107 400, 2~, 50/60 3374.1401) 3374.5401) � � 107
3750 W � 450 x 1400 x 250230, 1~, 50/60 3375.1041) 3375.5041) � � 108 115, 1~, 50/60 3375.1141) 3375.5141) � � 108 400, 2~, 50/60 3375.1441) 3375.5441) 108
5000 W � 450 x 1400 x 250230, 1~, 50/60 3375.100 3375.500 � � 108 115, 1~, 50/60 3375.1101) 3375.5101) � � 108 400, 2~, 50/60 3375.1401) 3375.5401) � � 108
1) Delivery times available on request.
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
286 Rittal System Climate Control
Direct Cooling Package Cold Plate for frequency converters
Cooling output1)
For installation inDimensions W x H x D
mm
Model No. DCP Approvals
PageEnclosure width mm
Enclosure depth
(side) mm
Without T-slot
With T-slot UL CUL DIN GS TÜV
2500 W 600 600 499 x 399 x 25 8616.610 8616.6002) � 112 2500 W 600 600 499 x 399 x 25 8616.630 8616.6202) � 112 3000 W 800 800 699 x 399 x 25 8616.810 8616.8002) � 112 3000 W 800 800 699 x 399 x 25 8616.830 8616.8202) � 112 5000 W 1000 1000 899 x 399 x 25 8616.010 8616.0002) 112 5000 W 1000 1000 899 x 399 x 25 8616.030 8616.0202) 112 6000 W 1200 – 1099 x 399 x 25 8616.210 8616.2002) 112 6000 W 1200 – 1099 x 399 x 25 8616.230 8616.2202) 112
1) With 25°C fluid inlet temperature,Tu = 40°C and DCP surface temperature = 40°C. 2) Versions with T-slot are 20 mm deep.
Cold Plate for frequency converters, manufacturer-specific
For installation in Dimensions W x H x D
mmModel No. DCP
ApprovalsPageEnclosure width
mmEnclosure depth
mm UL CUL DIN GS TÜV
Suitable for Siemens SINAMICS S210 Booksize
600 600 499 x 449 x 20 8616.640 � 113 600 600 499 x 449 x 20 8616.6411) � 113 800 800 699 x 449 x 20 8616.840 � 113 800 800 699 x 449 x 20 8616.8411) � 113
Suitable for Danfoss VLT® Automation Drive FC300
600 600 499 x 299 x 20 8616.6501) 113 600 600 499 x 299 x 20 8616.6511) 113 800 800 699 x 299 x 20 8616.8501) 113 800 800 699 x 299 x 20 8616.8511) 113
1) Delivery times available on request.
Cooling Unit
PowerDimensions W x H x D
mm
Model No. DCP ApprovalsPage
Add-on Stand-alone UL CUL DIN GS
400 W 252 x 572 x 205 8616.500 – 114 800 W 252 x 572 x 205 8616.5101) – 114 500 W 252 x 572 x 205 – 8616.5502) 114 900 W 252 x 572 x 205 – 8616.5602) 114
1) Space required behind the DCP = 110 mm 2) Cooling Unit as stand-alone with its own fluid connection (2 x G 1/4˝). Delivery times available on request.
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
287Rittal System Climate Control
Direct Cooling PackagePanel Cooling
PowerDimensions W x H x D
mm
Model No. DCP ApprovalsPage
Stand-alone UL CUL DIN GS
150 W 300 x 250 x 50 8616.300 115 350 W 400 x 300 x 60 8616.310 115
Delivery times available on request.
TopTherm recooling systems for waterMini
Cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
1.0 kW 600 x 400 x 430 230, 50/603318.600 � 118 3318.610 � 118
1.5 kW 600 x 400 x 430 230, 50/603319.600 � 118 3319.610 � 118
3.0 kW 602 x 676 x 645 400, 3~, 50/60/ 460, 3~, 60 3320.600 � 119
4.5 kW 602 x 676 x 645 400, 3~, 50/60/ 460, 3~, 60 3334.600 � 119
6.0 kW 602 x 1050 x 645
400, 3~, 50/60/ 460, 3~, 60 3334.660 � 120
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
288 Rittal System Climate Control
TopTherm recooling systems for waterPower Fluid Cooler
Cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
7.5 kW 595 x 1305 x 800 400, 3~, 50 3234.090 121 10.0 kW 655 x 1280 x 1160 400, 3~, 50 3234.100 122 14.0 kW 655 x 1280 x 1160 400, 3~, 50 3234.110 122 16.0 kW 655 x 1280 x 1160 400, 3~, 50 3234.120 122 19.0 kW 755 x 1280 x 1360 400, 3~, 50 3234.130 122 21.0 kW 755 x 1280 x 1360 400, 3~, 50 3234.140 122 25.0 kW 755 x 1280 x 1360 400, 3~, 50 3234.150 122 32.0 kW 855 x 1500 x 1560 400, 3~, 50 3234.160 122 36.0 kW 855 x 1500 x 1560 400, 3~, 50 3234.170 122 47.0 kW 1040 x 1700 x 2000 400, 3~, 50 3234.180 122 59.0 kW 1040 x 1700 x 2000 400, 3~, 50 3234.190 122
Recooling systems for water In a floor standing enclosure
Cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS TÜV
2.1 kW 470 x 725 x 540 400, 3~, 50/460, 3~, 60 3336.100 � 123
2.6 kW 485 x 965 x 650 400, 3~, 50/460, 3~, 60 3336.200 � 123
3.4 kW 485 x 965 x 650 400, 3~, 50/460, 3~, 60 3336.300 � 123
5.0 kW 595 x 1180 x 800 400, 3~, 50/460, 3~, 60 3336.500 � 123
6.2 kW 595 x 1180 x 800 400, 3~, 50/460, 3~, 60 3336.600 � 123
7.7 kW 595 x 1180 x 800 400, 3~, 50/460, 3~, 60 3336.650 � 123
10.0 kW 615 x 1178 x 1160 400, 3~, 50/460, 3~, 60 3336.700 � 124
14.4 kW 615 x 1178 x 1160 400, 3~, 50/460, 3~, 60 3336.710 � 124
16.3 kW 615 x 1178 x 1160 400, 3~, 50/460, 3~, 60 3336.720 � 124
18.5 kW 715 x 1178 x 1360 400, 3~, 50/460, 3~, 60 3336.730 � 124
20.9 kW 715 x 1178 x 1360 400, 3~, 50/460, 3~, 60 3336.740 � 124
25.2 kW 715 x 1178 x 1360 400, 3~, 50/460, 3~, 60 3336.750 � 124
32.0 kW 815 x 1400 x 1560 400, 3~, 50/460, 3~, 60 3339.100 � 124
36.2 kW 815 x 1400 x 1560 400, 3~, 50/460, 3~, 60 3339.200 � 124
Delivery times available on request.
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
289Rittal System Climate Control
Recooling systems for water Power Fluid Cooler
Cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS TÜV
68.0 kW 1100 x 1606 x 2450 400, 3~, 50 3234.200 125 79.0 kW 1100 x 1606 x 2450 400, 3~, 50 3234.210 125 90.0 kW 1100 x 1606 x 2450 400, 3~, 50 3234.220 125
101.0 kW 1100 x 1606 x 2950 400, 3~, 50 3234.230 125 124.0 kW 1100 x 1875 x 2950 400, 3~, 50 3234.240 125 135.0 kW 1100 x 1875 x 2950 400, 3~, 50 3234.250 125 158.0 kW 1100 x 1875 x 2950 400, 3~, 50 3234.260 125 175.0 kW 1100 x 1875 x 2950 400, 3~, 50 3234.270 125 209.0 kW 1100 x 1875 x 3950 400, 3~, 50 3234.280 125 271.0 kW 2200 x 2450 x 3400 400, 3~, 50 3234.290 126 305.0 kW 2200 x 2450 x 3400 400, 3~, 50 3234.300 126 339.0 kW 2200 x 2450 x 3400 400, 3~, 50 3234.310 126 406.0 kW 2200 x 2450 x 4250 400, 3~, 50 3234.320 126 452.0 kW 2200 x 2450 x 4250 400, 3~, 50 3234.330 126 502.0 kW 2200 x 2450 x 4250 400, 3~, 50 3234.340 126
In the TS 8 Top enclosure system
Cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS TÜV
6.0 kW 600 x 2150 x 600 400, 3~, 50 3335.060 127 7.5 kW 600 x 2150 x 600 400, 3~, 50 3335.075 127 10.0 kW 800 x 2150 x 600 400, 3~, 50 3335.100 128 12.0 kW 800 x 2150 x 600 400, 3~, 50 3335.120 128 15.0 kW 800 x 2150 x 600 400, 3~, 50 3335.150 128 20.0 kW 1200 x 2150 x 600 400, 3~, 50 3335.200 128 25.0 kW 1200 x 2150 x 600 400, 3~, 50 3335.250 128
Delivery times available on request.
Mini, for wall mounting
Cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
1.0 kW 400 x 950 x 310 400, 3~, 50/60/ 460, 3~, 60 3360.100 129
2.5 kW 400 x 1580 x 290 400, 3~, 50/60/ 460, 3~, 60 3360.250 129
4.0 kW 500 x 1580 x 390 400, 3~, 50/60/ 460, 3~, 60 3360.470 129
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
290 Rittal System Climate Control
Recooling systems for oil In a floor standing enclosure
Cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
2.5 kW 485 x 965 x 650 400, 3~, 50 3337.200 130 3.4 kW 485 x 965 x 650 400, 3~, 50 3337.300 130 5.2 kW 595 x 1180 x 800 400, 3~, 50 3337.500 130 6.7 kW 595 x 1180 x 800 400, 3~, 50 3337.600 130 8.0 kW 595 x 1180 x 800 400, 3~, 50 3337.650 130 11.0 kW 615 x 1178 x 1160 400, 3~, 50 3337.700 131 15.5 kW 615 x 1178 x 1160 400, 3~, 50 3337.710 131 17.2 kW 615 x 1178 x 1160 400, 3~, 50 3337.720 131 19.0 kW 715 x 1178 x 1360 400, 3~, 50 3337.730 131 22.0 kW 715 x 1178 x 1360 400, 3~, 50 3337.740 131 26.0 kW 715 x 1178 x 1360 400, 3~, 50 3337.750 131
Delivery times available on request.
Immersible recooling systems for oilCooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
2.4 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.020 132
3.2 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.040 132
4.6 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.060 132
5.6 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.080 132
8.5 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.100 133
10.5 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.120 133
12.0 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.140 133
13.6 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.160 133
15.3 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.180 133
17.3 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.200 133
21.0 kW 785 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.220 134
31.0 kW 785 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.240 134
35.0 kW 785 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.260 134
46.0 kW 1830 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.280 134
49.0 kW 1830 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.300 134
61.0 kW 1830 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.320 134
73.0 kW 1830 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.340 134
78.0 kW 1830 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.360 134
Delivery times available on request.
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
291Rittal System Climate Control
Immersible recooling systems for emulsionCooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
2.4 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.500 132
3.2 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.520 132
4.6 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.540 132
5.6 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.560 132
8.5 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.580 133
10.5 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.600 133
12.0 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.620 133
13.6 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.640 133
15.3 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.660 133
17.3 kW 785 x 1650 x 785 400, 3~, 50 460, 3~, 60 3338.680 133
21.0 kW 785 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.700 134
31.0 kW 785 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.720 134
35.0 kW 785 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.740 134
46.0 kW 1830 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.760 134
49.0 kW 1830 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.780 134
61.0 kW 1830 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.800 134
73.0 kW 1830 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.820 134
78.0 kW 1830 x 1650 x 1830 400, 3~, 50 460, 3~, 60 3338.840 134
Delivery times available on request.
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
CRAC systems Without heater
With heater
With humidifier
With heater and humidifier
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK Approvals PageWithout
heater UL CUL DIN GS
23 kW 1100 x 1950 x 650 400/50 3301.620 138 39 kW 1100 x 1950 x 850 400/50 3301.660 138 78 kW 1800 x 1950 x 850 400/50 3301.830 138
118 kW 2600 x 1950 x 850 400/50 3301.870 138 18 kW 1100 x 1950 x 850 400/50 3300.510 138 30 kW 1100 x 1950 x 850 400/50 3300.560 138 43 kW 1400 x 1950 x 850 400/50 3300.710 138 54 kW 1800 x 1950 x 850 400/50 3300.760 138
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK Approvals PageWith
heater UL CUL DIN GS
23 kW 1100 x 1950 x 650 400/50 3301.630 138 39 kW 1100 x 1950 x 850 400/50 3301.670 138 78 kW 1800 x 1950 x 850 400/50 3301.840 138
118 kW 2600 x 1950 x 850 400/50 3301.880 138 18 kW 1100 x 1950 x 850 400/50 3300.520 138 30 kW 1100 x 1950 x 850 400/50 3300.570 138 43 kW 1400 x 1950 x 850 400/50 3300.720 138 54 kW 1800 x 1950 x 850 400/50 3300.770 138
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK Approvals PageWith
humidifier UL CUL DIN GS
23 kW 1100 x 1950 x 650 400/50 3301.640 138 39 kW 1100 x 1950 x 850 400/50 3301.680 138 78 kW 1800 x 1950 x 850 400/50 3301.850 138
118 kW 2600 x 1950 x 850 400/50 3301.890 138 18 kW 1100 x 1950 x 850 400/50 3300.530 138 30 kW 1100 x 1950 x 850 400/50 3300.580 138 43 kW 1400 x 1950 x 850 400/50 3300.730 138 54 kW 1800 x 1950 x 850 400/50 3300.780 138
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK Approvals PageWith heater
and humidifier UL CUL DIN GS
23 kW 1100 x 1950 x 650 400/50 3301.650 138 39 kW 1100 x 1950 x 850 400/50 3301.690 138 78 kW 1800 x 1950 x 850 400/50 3301.860 138
118 kW 2600 x 1950 x 850 400/50 3301.990 138 18 kW 1100 x 1950 x 850 400/50 3300.540 138 30 kW 1100 x 1950 x 850 400/50 3300.590 138 43 kW 1400 x 1950 x 850 400/50 3300.740 138 54 kW 1800 x 1950 x 850 400/50 3300.790 138
292 Rittal System Climate Control
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
Aisle containment Model No. SK Approvals
PageUL CUL DIN GS
Roof element 3300.170 3300.180 – 139 Door element – – 3300.160 139 Width of element (identical to enclosure width), mm 600 800 –
Width of cold aisle mm 1200 1200 1200Height of cold aisle mm – – 2000
Liquid Cooling PackageLCP Standard
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
Approvals Page
UL CUL GS
Up to 20 kW 300 x 2000 x 1000 230, 50/60 3301.230 � � � 141 Up to 20 kW 300 x 2000 x 1000 115, 50/60 3301.210 � � � 141 Up to 20 kW 300 x 2000 x 1200 230, 50/60 3301.420 141
LCP Plus
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
Approvals Page
UL CUL GS
Up to 30 kW 300 x 2000 x 1200 230, 50/60 3301.4801) � � � 142 Up to 40 kW 300 x 2400 x 1200 230, 50/60 on request 142
1) Delivery times available on request.
293Rittal System Climate Control
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
Liquid Cooling PackageLCP Extend
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
Approvals Page
UL CUL GS
12 kW 520 x 1910 x 160 230, 50/60 3301.4901) � 143 1) Delivery times available on request.
LCP Smart
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz
Model No. SK
Approvals Page
UL CUL GS
Up to 20 kW 300 x 2000 x 1000 200 – 230, 1~, 50/60 400, 3~, 50/60 3301.460 144
LCP Inline
Useful cooling output
Dimensions W x H x D
mm
Voltage V, Hz Model No. SK
Approvals Page
UL CUL DIN GS
Up to 30 kW1) 300 x 2000 x 1200 230, 1~, 50/60 400, 3~, 50/60 3301.470 145
1) Achievable with 15°C cold water inlet temperature, volumetric flow 35 l/min and ΔT of 20°C on the air side.
294 Rittal System Climate Control
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
Chillers for IT cooling
Cooling outputDimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
15.0 kW 815 x 1400 x 1560 400, 3~, 50 3232.700 148 24.0 kW 815 x 1400 x 1560 400, 3~, 50 3232.710 148 35.0 kW 815 x 1400 x 1560 400, 3~, 50 3232.720 148 48.0 kW 1000 x 2180 x 2000 400, 3~, 50 3232.730 148 61.0 kW 1100 x 1606 x 2450 400, 3~, 50 3232.740 148 72.0 kW 1100 x 1606 x 2450 400, 3~, 50 3232.750 148 82.0 kW 1100 x 1606 x 2450 400, 3~, 50 3232.760 148 92.0 kW 1100 x 1606 x 2950 400, 3~, 50 3232.770 148
113.0 kW 1100 x 1875 x 2950 400, 3~, 50 3232.780 148 123.0 kW 1100 x 1875 x 2950 400, 3~, 50 3232.790 148 145.0 kW 1100 x 1875 x 2950 400, 3~, 50 3232.800 149 161.0 kW 1100 x 1875 x 2950 400, 3~, 50 3232.810 149 193.0 kW 1100 x 1875 x 3950 400, 3~, 50 3232.820 149 248.0 kW 2200 x 2450 x 3400 400, 3~, 50 3232.830 149 280.0 kW 2200 x 2450 x 3400 400, 3~, 50 3232.840 149 312.0 kW 2200 x 2450 x 3400 400, 3~, 50 3232.850 149 372.0 kW 2200 x 2450 x 4250 400, 3~, 50 3232.860 149 415.0 kW 2200 x 2450 x 4250 400, 3~, 50 3232.870 149 462.0 kW 2200 x 2450 x 4250 400, 3~, 50 3232.880 149
Delivery times available on request.
Water/water heat exchangers
Cooling outputDimensions W x H x D
mm
Voltage V, Hz Model No. SK
ApprovalsPage
UL CUL DIN GS
25.0 kW 1200 x 1900 x 800 400, 3~, 50 3232.900 153 50.0 kW 1200 x 1900 x 800 400, 3~, 50 3232.910 153 75.0 kW 1200 x 1900 x 800 400, 3~, 50 3232.920 153
100.0 kW 1200 x 1900 x 800 400, 3~, 50 3232.930 153 150.0 kW 1200 x 1900 x 800 400, 3~, 50 3232.940 153 200.0 kW 2000 x 1900 x 800 400, 3~, 50 3232.950 153 250.0 kW 2000 x 1900 x 800 400, 3~, 50 3232.960 153
Delivery times available on request.
295Rittal System Climate Control
Overview of products and approvalsO
verv
iew
of p
rodu
cts
and
appr
oval
s
Cooling units for CS modular enclosures
Approvals CS 9761.032: ● UL ● C-UL
Dimensions W x H x D
mm
Mounting position
Useful cooling output EN 814 Rated operating
voltageModel No.
CS PageL35 L35 L35 L50
535 x 390 x 400 Roof mounting 900 W 750 W 230 V AC, 50/60 Hz 9762.012 160 430 x 1070 x 210 Door mounting 900 W 650 W 230 V AC, 50/60 Hz 9768.100 160
515 x 1170 x 151.5 Wall mounting 900 W 750 W 230 V AC, 50/60 Hz 9761.012 160 695 x 1132 x 151.5 Wall mounting 1400 W 1050 W 230 V AC, 50/60 Hz 9761.032 160 776 x 1100 x 250 Wall mounting 2500 W 2000 W 230 V AC, 50/60 Hz 9761.042 160 400 x 1050 x 310 Universal built-in 1500 W 1250 W 230 V AC, 50/60 Hz 9768.150 160
Delivery times available on request.
Heat exchangers for CS modular enclosures Dimensions W x H x D
mm
Mounting position
Specific thermal output
Heater1) Rated operating voltage Model No. CS Page
470 x 158 x 380 Roof mounting 30 W/K without 48 V DC 9764.040 161 535 x 390 x 400 Roof mounting 60 W/K 400 W 48 V DC 9764.012 161
515 x 1170 x 151.5 Wall mounting 60 W/K 400 W 48 V DC 9763.012 161 480 x 1005 x 110 Door mounting 40 W/K 400 W 48 V DC 9768.032 162 510 x 1005 x 150 Door mounting 60 W/K 400 W 48 V DC 9768.012 162 445 x 1050 x 150 Door mounting 85 W/K without 48 V DC 9768.042 162 575 x 1050 x 195 Door mounting 120 W/K without 48 V DC 9768.062 162
1) Rated operating voltage 230 V AC, 50/60 Hz Delivery times available on request.
296 Rittal System Climate Control
Overview of products and approvals
Ove
rvie
w o
f pro
duct
s an
d ap
prov
als
Climate control units for Toptec CR
Dimensions W x H x D
mmInstallation
Useful cooling output EN 814
Specific thermal output
Rated operating voltage
Model No. CS Page
L35 L35 L35 L50
Heat exchangers
500 x 1000 x 150 Universal built-in – – 85 W/K 48 V DC 9776.100 163
500 x 1000 x 200 Universal built-in – – 105 W/K 48 V DC 9776.150 163
Cooling units
500 x 1000 x 150 Universal built-in 1000 W 650 W – 230 V AC, 50/60 Hz 9776.500 163
500 x 1000 x 260 Universal built-in 1600 W 1200 W – 230 V AC, 50/60 Hz 9776.550 163
Delivery times available on request.
Enclosure heatersWithout fan
With fan
Continuous thermal output at Tu = 10°C
Voltage Volt Model No. SK
ApprovalsPage
UL CUL DIN GS VDE
10 W 100 – 240 (AC/DC) 3105.110 169 20 W 100 – 240 (AC/DC) 3106.120 169 30 W 100 – 240 (AC/DC) 3115.130 169 50 W 100 – 240 (AC/DC) 3116.140 169 75 W 100 – 240 (AC/DC) 3107.150 169 100 W 100 – 240 (AC/DC) 3107.160 169 150 W 100 – 240 (AC/DC) 3102.170 169
Continuous thermal output at Tu = 10°C
Voltage Volt
Model No. SK ApprovalsPage
110 V 230 V UL CUL DIN GS VDE
250 W1) 115 or 240 (AC/DC) 3105.210 3105.180 169 400 W1) 115 or 240 (AC/DC) 3105.220 3105.190 169 800 W1) 115 or 240 (AC/DC) 3105.230 3105.200 169
1) Output with fan.
297Rittal System Climate Control
ServiceRittal Global Service – for system
298
climate control
A central point of contact, decentralised implementation, short response times – this is the successful concept
behind Rittal Global Service. High-tech system climate control must offer a permanently high level of reliability
in enclosure cooling as well as in machine and process cooling.
With this in mind, we offer fast and reliable response times worldwide – thanks to our network of local service
engineers.
Customer satisfaction from the outset
Pre-Sales We face up to our responsibilities
● Requirement analysis ● Load tests● Thermal imaging● Simulation and calculation
Implementation Because we are pleased to be on board when you arrive at a solution.
● Installation/integration ● Commissioning ● Instruction ● Certification
After-SalesWe smooth the way for your decision.
● Service contracts ● Maintenance/servicing● Repairs● Spare parts management● Training
Rittal Global Service – always on hand, whenever you need us!
Our worldwide Rittal Global Service hubs
Europe: [email protected] Tel. +49(0)2772 5051855
North America: [email protected] Tel. +1800 477 4000
South America: [email protected] Tel. +55 11 36 22 23 77
China: [email protected] Tel. +86 800 820 0866
India: [email protected] Tel. +91 80 22 890 783
� Five global service support points in the world's major economic hubs
� Over 60 other service sites with
� more than 250 qualified partners and our own technical specialists, worldwide!
Rittal System Climate Control
Rittal System Climate Control
Service
Rittal climate checksService packages for every aspect of system climate control
Load tests482.6 mm (19˝) slide-in equipment which simu-lates the thermodynamic response of servers allows you to determine in advance whether your cooling system is adequate for any planned extensions. Furthermore, after installing the LCP family, the cooling response can be tested directly, without the presence of a server.
Load tests as the optimum basis for planning.
Intelligent wireless sensor technologySensors the size of a button record the tempera-ture and humidity at specified locations in the rack. The location and time-dependent readings are extracted and displayed. The result is a 3D analysis of the data centre's cooling response.
With sensor technology for 3D analyses.
Piping network calculationThe Rittal specialists use a software package to design and dimension the pipe networks of liquid cooling systems, taking into consideration the architectural conditions. The specifications cre-ated allow the local installation engineer to start work immediately.
Perfect dimensioning of pipe networks.
CFD (Computational Fluid Dynamics)A 3D computer simulation is used to visualise the thermodynamic response of the planned data centre with server racks and climate control system. Predicting the temperature, speed, pres-sure and hence flow conditions in the data centre facilitates fast response times.
Forward planning with CFD.
ThermographyUsing a thermal imaging camera illustrates the temperature conditions (surface) inside the data centre with colour coding, hot-spots can be located and eliminated.
Localisation of hot-spots via thermography.
299
List of model numbers2102.180 to 3302.110
Model No. Page2102.180 582102.190 582102.320 582102.400 582102.410 582102.490 582541.235 1832542.235 1832543.235 1833102.170 1693105.110 1693105.180 1693105.190 1693105.200 1693105.210 1693105.220 1693105.230 1693106.120 1693107.150 1693107.160 1693108.024 553108.100 553108.115 553110.000 1783110.200 1783114.024 1773114.100 1773114.115 1773115.130 1693116.140 1693118.000 1783120.000 1793120.115 1793121.000 1953124.000 1803124.100 1803124.200 1793125.800 623126.100 633126.115 633126.410 643126.424 643127.100 633127.115 633128.100 633128.115 633128.410 643128.424 643129.100 633129.115 633129.410 643129.424 643129.800 623130.100 633130.115 633130.410 643130.424 643144.000 533145.000 533148.007 543149.007 543149.410 543149.420 543149.440 543149.810 543149.820 54
3149.840 543159.100 1953164.115 553164.230 553164.610 553164.620 553164.810 553164.820 553165.024 593165.048 593165.115 593165.230 593165.615 593165.624 593165.630 593165.648 593165.815 593165.824 593165.830 593165.848 593169.007 543171.100 1913172.100 1913173.100 1913174.000 1913175.000 1943176.000 1933177.000 1893181.100 1913182.100 1913183.100 1913201.030 1923201.050 1913201.100 823201.200 973201.300 973202.100 823209.100 1023209.104 1023209.110 1023209.114 1023209.140 1023209.144 1023209.500 1023209.504 1023209.510 1023209.514 1023209.540 1023209.544 1023210.100 1033210.104 1033210.110 1033210.114 1033210.140 1033210.144 1033210.500 1033210.504 1033210.510 1033210.514 1033210.540 1033210.544 1033212.024 1043212.115 1043212.230 1043213.300 1763213.310 176
Model No. Page3213.320 1763213.330 1763214.100 1053215.100 1053216.470 1093216.480 1093232.700 1483232.710 1483232.720 1483232.730 1483232.740 1483232.750 1483232.760 1483232.770 1483232.780 1483232.790 1483232.800 1493232.810 1493232.820 1493232.830 1493232.840 1493232.850 1493232.860 1493232.870 1493232.880 1493232.900 1533232.910 1533232.920 1533232.930 1533232.940 1533232.950 1533232.960 1533234.090 1213234.100 1223234.110 1223234.120 1223234.130 1223234.140 1223234.150 1223234.160 1223234.170 1223234.180 1223234.190 1223234.200 1253234.210 1253234.220 1253234.230 1253234.240 1253234.250 1253234.260 1253234.270 1253234.280 1253234.290 1263234.300 1263234.310 1263234.320 1263234.330 1263234.340 1263248.000 653253.000 1893253.010 1893253.200 1903253.220 1903254.000 1893254.200 1903267.100 189
Model No. Page3267.200 1903273.500 763273.515 763284.200 1903284.210 1903285.000 1893285.200 1903286.000 1893286.100 1893286.110 1893286.120 1903286.200 1903286.210 1903286.230 1903286.240 1903286.250 1903286.260 1833286.270 1833286.280 1833286.300 1893286.310 1903286.400 1893286.410 1903286.500 1893286.510 1903286.520 1903286.600 1893286.610 1903286.700 1823286.780 1753286.800 1823286.850 1753286.860 1753286.870 1743286.880 1753286.900 1823286.970 1743286.980 1753286.990 1743288.200 1903289.200 1903294.100 1893294.200 1903300.040 713300.050 713300.060 713300.070 713300.080 713300.090 713300.110 713300.120 713300.160 139, 2933300.170 139, 2933300.180 139, 2933300.510 1383300.520 1383300.530 1383300.540 1383300.560 1383300.570 1383300.580 1383300.590 1383300.710 1383300.720 1383300.730 1383300.740 138
Model No. Page3300.760 1383300.770 1383300.780 1383300.790 1383301.210 1413301.221 1883301.230 1413301.250 1863301.290 1863301.310 1873301.320 1863301.330 1873301.340 1873301.350 1883301.351 1883301.360 1883301.370 1863301.380 1863301.390 1863301.400 1883301.420 1413301.421 1883301.460 1443301.470 1453301.480 1423301.490 1433301.560 1923301.570 1923301.580 1923301.590 1923301.600 1923301.608 1923301.610 1923301.612 1923301.620 1383301.630 1383301.640 1383301.650 1383301.660 1383301.670 1383301.680 1383301.690 1383301.790 1863301.800 763301.830 1383301.840 1383301.850 1383301.860 1383301.870 1383301.880 1383301.890 1383301.900 1943301.910 1943301.920 1943301.930 1943301.940 1943301.950 1943301.955 1943301.957 1943301.960 1943301.965 1943301.967 1943301.980 1863301.990 1383302.100 843302.110 84
Model No. Page
300 Rittal System Climate Control
List of model numbers3302.200 to 3366.540
3302.200 843302.210 843302.300 833302.310 833303.100 843303.104 913303.110 843303.114 913303.200 843303.210 843303.500 843303.504 913303.510 843303.514 913303.600 843303.610 843304.100 86, 873304.104 913304.110 873304.114 913304.130 943304.140 873304.142 933304.144 913304.160 943304.200 873304.210 873304.240 873304.500 86, 873304.504 913304.510 873304.514 913304.530 943304.540 873304.542 933304.544 913304.560 943304.600 873304.610 873304.640 873304.700 863304.740 953304.800 863305.100 873305.104 913305.110 873305.114 913305.130 943305.140 873305.142 933305.144 913305.160 943305.200 873305.210 873305.240 873305.500 873305.504 913305.510 873305.514 913305.530 943305.540 873305.542 933305.544 913305.560 943305.600 873305.610 87
Model No. Page3305.640 873307.700 703307.710 703307.740 703310.700 703310.710 703310.740 703318.600 1183318.610 1183319.600 1183319.610 1183320.600 1193321.027 443321.047 443321.107 443321.117 443321.207 1933321.267 483321.607 483321.617 483321.700 1913321.800 1933322.027 443322.047 443322.107 443322.117 443322.207 1933322.267 483322.607 483322.617 483322.700 1913322.800 1933323.027 453323.047 453323.107 453323.117 453323.207 1933323.267 483323.607 483323.617 483323.800 1933324.027 453324.047 453324.107 453324.117 453324.607 493324.617 493324.800 1933325.027 463325.047 463325.107 463325.117 463325.207 1933325.267 493325.607 493325.617 493326.107 473326.117 473326.207 1933326.267 493326.607 493326.617 493326.800 1933327.107 473327.117 473327.147 47
Model No. Page3327.607 493327.617 493327.700 1913328.100 893328.104 923328.110 893328.114 923328.140 893328.144 923328.200 893328.210 893328.240 893328.500 893328.504 923328.510 893328.514 923328.540 893328.544 923328.600 893328.610 893328.640 893329.100 893329.104 923329.110 893329.114 923329.140 893329.144 923329.200 893329.210 893329.240 893329.500 893329.504 923329.510 893329.514 923329.540 893329.544 923329.600 893329.610 893329.640 893329.903 1913329.904 1913332.140 903332.240 903332.540 903332.640 903334.600 1193334.660 1203335.060 1273335.075 1273335.100 1283335.120 1283335.150 1283335.200 1283335.250 1283336.100 1233336.200 1233336.300 1233336.500 1233336.600 1233336.650 1233336.700 1243336.710 1243336.720 1243336.730 1243336.740 1243336.750 124
Model No. Page3337.200 1303337.300 1303337.500 1303337.600 1303337.650 1303337.700 1313337.710 1313337.720 1313337.730 1313337.740 1313337.750 1313338.020 1323338.040 1323338.060 1323338.080 1323338.100 1333338.120 1333338.140 1333338.160 1333338.180 1333338.200 1333338.220 1343338.240 1343338.260 1343338.280 1343338.300 1343338.320 1343338.340 1343338.360 1343338.500 1323338.520 1323338.540 1323338.560 1323338.580 1333338.600 1333338.620 1333338.640 1333338.660 1333338.680 1333338.700 1343338.720 1343338.740 1343338.760 1343338.780 1343338.800 1343338.820 1343338.840 1343339.100 1243339.200 1243340.024 523340.115 523340.230 523341.024 523341.115 523341.230 523342.024 523342.115 523342.230 523342.500 523350.024 523350.115 523350.230 523351.024 523351.115 523351.230 523352.024 52
Model No. Page3352.115 523352.230 523352.500 523355.100 523356.100 523357.100 523359.100 743359.110 743359.140 743359.200 743359.210 743359.240 743359.500 743359.510 743359.540 743359.600 743359.610 743359.640 743360.100 1293360.250 1293360.470 1293361.100 853361.110 853361.140 853361.200 853361.210 853361.240 853361.500 853361.510 853361.540 853361.600 853361.610 853361.640 853363.100 1063363.104 1063363.110 1063363.114 1063363.140 1063363.144 1063363.500 1063363.504 1063363.510 1063363.514 1063363.540 1063363.544 1063364.100 1063364.104 1063364.110 1063364.114 1063364.140 1063364.144 1063364.500 1063364.504 1063364.510 1063364.514 1063364.540 1063364.544 1063366.100 883366.110 883366.140 883366.200 883366.210 883366.240 883366.500 883366.510 883366.540 88
Model No. Page
301Rittal System Climate Control
List of model numbers3366.600 to 9776.550
3366.600 883366.610 883366.640 883373.100 1073373.104 1073373.110 1073373.114 1073373.140 1073373.144 1073373.500 1073373.504 1073373.510 1073373.514 1073373.540 1073373.544 1073374.100 1073374.104 1073374.110 1073374.114 1073374.140 1073374.144 1073374.500 1073374.504 1073374.510 1073374.514 1073374.540 1073374.544 1073375.100 1083375.104 1083375.110 1083375.114 1083375.140 1083375.144 1083375.500 1083375.504 1083375.510 1083375.514 1083375.540 1083375.544 1083377.000 1823377.100 883377.110 883377.140 883377.200 883377.210 883377.240 883377.500 883377.510 883377.540 883377.600 883377.610 883377.640 883382.100 743382.110 743382.200 743382.210 743382.500 743382.510 743382.600 743382.610 743383.100 753383.110 753383.140 753383.200 753383.210 753383.240 75
Model No. Page3383.500 753383.510 753383.540 753383.600 753383.610 753383.640 753383.740 793384.100 773384.110 773384.140 773384.200 773384.210 773384.240 773384.500 773384.510 773384.540 773384.600 773384.610 773384.640 773385.100 773385.110 773385.140 773385.200 773385.210 773385.240 773385.500 773385.510 773385.540 773385.600 773385.610 773385.640 773386.140 783386.240 783386.540 783386.640 783387.140 783387.240 783387.540 783387.640 784127.000 1766730.600 1837000.670 587000.680 587109.035 1777507.760 577526.964 1797826.360 587826.362 587826.366 587826.368 587826.369 587826.382 587826.480 587826.486 587826.488 587826.489 587856.360 587856.362 587856.366 587856.368 587856.380 587856.388 587858.488 577885.000 587885.100 587885.200 58
Model No. Page7886.000 587886.100 587886.200 587966.035 567968.035 567980.000 567980.100 567980.148 567986.035 567988.035 568616.000 1128616.010 1128616.020 1128616.030 1128616.200 1128616.210 1128616.220 1128616.230 1128616.300 1158616.310 1158616.500 1148616.510 1148616.550 1148616.560 1148616.600 1128616.610 1128616.620 1128616.630 1128616.640 1138616.641 1138616.650 1138616.651 1138616.700 1848616.710 1848616.720 1848616.750 1848616.751 1848616.760 1848616.761 1848616.762 1848616.763 1858616.764 1858616.765 1858616.800 1128616.810 1128616.820 1128616.830 1128616.840 1138616.841 1138616.850 1138616.851 1138801.300 1818801.310 1818801.320 1818801.330 1818801.340 1818801.350 1818801.360 1818801.380 1828801.410 1818801.420 1818801.430 1818801.440 1818801.920 1819761.012 1609761.032 160
Model No. Page9761.042 1609762.012 1609763.012 1619764.012 1619764.040 1619765.050 1809765.051 1609765.105 1809765.110 1809765.115 1809768.012 1629768.032 1629768.042 1629768.062 1629768.100 1609768.150 1609769.002 529776.100 1639776.150 1639776.500 1639776.550 163
Model No. Page
302 Rittal System Climate Control
Index
AAccessories 171 – 195– Air routing 174 – 176– Control/regulation 177 – 180– Filter technology 189 – 191– for Cold Plate 184, 185– for Liquid Cooling Package 186 – 188– General 192 – 194– Mounting accessories 181 – 183– Software 195Active kit for TE 58Adaptor frame 109– for wall-mounted cooling units 183Add-on cover 188Adjustable frame– for air/air heat exchangers 183Air diverter 176Air duct system– for TopTherm roof-mounted
cooling units and air/water heat exchangers 174
Air routing 174Air/air heat exchangers 60 – 65– Roof-mounted 65– Wall-mounted,
railway-compatible version 64Air/water heat exchangers 100 – 109Aisle containment 139Approvals and product overview 270 – 297
BBottom-mounted adaptor– for enclosure internal thermostat
and hygrostat 178BUS system SK 180
CCable connection kit– for CS outdoor cooling units 180– for CS outdoor heat exchangers 180Chillers for IT cooling 146 – 149Climate control components, Outdoor 160 – 165Climate control doors 71CO2 cooling units 79Cold Plate– for frequency converters 112, 113Condensate collecting bottle 192Condensate hose 192Connection hose 188Cool Efficiency 86Cooling medium for recooling systems 194Cooling module 70– for LCP Standard 141– for LCP Standard and Smart 186Cooling Unit 114Cooling units 66 – 97– Cool Efficiency 86– for CS modular enclosures 160– for precision machine tools 93– for Toptec CR 163– for VIP 6000 command panels 82– Mini in horizontal format 83– NEMA 4x design 91, 92– Roof-mounted 74 – 79– Roof-mounted, stainless steel 74, 75,
77, 78– Wall-mounted 82 – 95– Wall-mounted, stainless steel 84, 85,
87 – 90Cooling with ambient air 41 – 65
Cover bungs 175Cover plates– for fan panels FlatBox 57Covers– for fan-and-filter units/outlet filters 193– for LCP Standard 187CRAC systems 136CS Outdoor climate control 157 – 165
DDC fan mounting plate– for TS 57DCP Cold Plate 112, 113DCP Cooling Unit 114DCP Panel Cooling 115Deflector for air duct system, 90° 174Digital enclosure internal temperature display and thermostat 177Direct cooling package 110 – 115Direct fluid connection 184Door-mounted fan– for server enclosures TS, TE 59Door-operated switch 176Double-nipple coupling 185
EElbow coupling 185Electric condensate evaporator 192EMC– Fan-and-filter units, outlet filters 48, 49Enclosure heaters 167 – 169Enclosure internal fan– for TS 8 55Enclosure internal temperature display and thermostat, digital 177Enclosure internal thermostat 178EPLAN Cabinet 195Explosion-proof cooling units 94Ex-proof climate control systems 164
FFan expansion kit 56– for door-mounted fan TS 59Fan mounting plate– for TS 56, 57Fan roof, modular, two-piece– for TS 8, FR(i) 58Fan systems 50 – 59– for TS 8 54Fan unit, active– for TE 58Fan-and-filter unit– EMC 48, 49Fan-and-filter units 42 – 47Filter holder for roof ventilation 194Filter mats– for tangential fans/
front outlet grilles 189– for discontinued
climate control doors 190– for discontinued cooling units 189, 190– for heat exchangers 190– for Mini recooling systems 190– for TopTherm climate control door/
section door 190– for TopTherm cooling units 189, 190Filter technology 189 – 191Fine filter mats– for fan-and-filter units/outlet filters 191
Flexible hose 184Flow regulator valve 194Fluid distribution manifold 184Front cover 145, 186– for LCP Inline 145Front outlet grille 2 U– for tangential fans 193
HHeat exchangers– Air/air 62 – 65– Air/water 102 – 109– for CS modular enclosures 161, 162– for Toptec CR 163– LCP Extend 143– LCP Plus 142– LCP Standard 141– Water/water 150 – 153Heaters 167 – 169Hood– for fan-and-filter units/outlet filters 193Hose-proof hoods– for fan-and-filter units/outlet filters 193Hygrostat 178
IImmersible recooling systems– for oil/emulsion 132 – 134Integrated louvres 183Interface card for TopTherm 179
LLCP Inline 145LCP Smart 144LCP Extend 143LCP Plus 142LCP Standard 141Lint screen 191Liquid cooling IE 99 – 134Liquid cooling IT 135 – 155Liquid Cooling Package 136, 140 – 145Louvred grille– for lint screen 191
MMetal filters 190Micro air/water heat exchanger 104Mini cooling unit in horizontal format 83Mini recooling systems 118 – 120, 129– for wall mounting 129Modular climate control concept 68 – 71Monitoring 235 – 237Mounting accessories 181 – 183Mounting adaptor– for speed control 179
NNEMA 4x– Cooling units 91, 92
303Rittal System Climate Control
Index
OOutdoor climate control 157 – 165Outlet filter 193– EMC 48, 49Overflow valve 194Overview of products and approvals 270 – 297
PPanel Cooling 115Piping systems– in the data centre 154, 155Power Fluid Cooler 121, 122, 125, 126Power packs 24 V (DC)– for thermoelectric cooler 192Project planning 30 – 39
QQuick-action vent valve 184Quick-change frame– for TopTherm roof-mounted
cooling units 182Quick-release fastener 188
RRack-mounted fans 482.6 mm (19˝) 50, 52Raised-floor, CRAC system 138Recooling systems 116 – 134– for oil 130, 131– for water 118 – 129– immersible, oil/emulsion 132 – 134RiDiag II 195Roof plates– DK-TS 181– TS 181Roof-mounted– Air/air heat exchangers 65– Air/water heat exchangers 102, 103– Cooling units 72 – 79Roof-mounted fan 54– for the office sector 55RTT roof-mounted fans 54
SSection doors for cooling modules 71Service 298, 299Shallow air duct system 175Shallow duct extension 175Shielding– Horizontal 187– Vertical 186SK BUS system 180Software service 195Spare filter mat– for fan-and-filter units/outlet filters 191– for filter holder 191– for thermoelectric cooler 191Speed control 179
Stainless steel– Cooling units – roof-mounted 74, 75,
77, 78– Cooling units – wall-mounted 84, 85,
87 – 90Stoppers– for roof-mounted cooling units 175System accessories 171 – 195System attachment– for frequency converters 184System solutions 14 – 29
TTangential fans 50, 53Technical details 239 – 268Temperature display and thermostat, digital 177Temperature sensor TF25 185Test adaptor– for CS Outdoor
climate control equipment 180Therm Software 195Thermoelectric coolers 96, 97Thermostat 178– Digital 177Tips and tricks 197 – 237Touchscreen display– for LCP Smart 186Trim frame– for slimline cooling units 182
VVent attachment 54– TS 182Vent valve 188VIP small cooling units 82
WWall-mounted cooling units 80 – 95– Cool Efficiency 86– Thermoelectric coolers 96, 97Wall-mounted heat exchangers– Air/air 62, 63– Air/water 104 – 109Wide-range power pack– for thermoelectric cooler 192
RAL-coloursColour RAL Description
3001 signal red
5002 ultramarine blue
5005 signal blue
5018 turquoise blue
7015 slate grey
7022 umbra grey
7024 graphite grey
7030 stone grey
7032 pebble grey
7033 cement grey
7035 pale grey
7044 silky grey
8019 grey brown
9005 jet black
9006 white aluminium
9011 graphite black
9017 traffic black
We reserve the right to further develop-ments and technical modifications of our products. Such modifications, along with errors and printing errata, shall not con-stitute grounds for compensation.We refer customers to our Terms of Sale and Delivery.
304
Rittal System Climate ControlSwitch to perfection
Rittal GmbH & Co. KG � Postfach 1662 � D-35726 HerbornTelephone: +49(0)2772 505-0 � Telefax: +49(0)2772 505-2319 � eMail: [email protected] � www.rittal.com
All in all – solutions from Rittal
Rittal has one of the largest ranges of enclosures available for immediate delivery. However, Rittal also supplies inte-grated solutions – up to Level 4. This comprises mechanical installation, power supply, electronic components, climate control and central monitoring. For all of your requirements.
Fully assembled and functional. Wherever in the world you develop and implement solutions for yourself and your customers, we are close at hand. The global alliance between production, distribution and service guarantees closeness to the customer. Worldwide!
04/0
9 � E
384
Cooling units � Recooling units � Heat exchangers Fan-and-filter units � 19˝ climate control � Heaters � IT cooling
Electronic Packaging
IT Solutions
Communication Systems
System Climate Control
Power Distribution
Industrial Enclosures