![Page 1: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/1.jpg)
Chapter ThreeKinetics of particles
![Page 2: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/2.jpg)
Kinetics of particles• It is the study of the relations existing between
the forces acting on body, the mass of the body,and the motion of the body.
• It is the study of the relation betweenunbalanced forces and the resulting motion.
![Page 3: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/3.jpg)
• Newton ’s first law and third law are sufficient
for studying bodies at rest (statics) or bodies in
motion with no acceleration.
![Page 4: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/4.jpg)
• When a body accelerates ( change in velocity
magnitude or direction) Newton ’s second law is
required to relate the motion of the body to the
forces acting on it.
![Page 5: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/5.jpg)
Force, mass and acceleration• Newton ’s Second Law: If the resultant force
acting on a particle is not zero the particle willhave an acceleration proportional to themagnitude of resultant and in the direction of theresultant.
![Page 6: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/6.jpg)
• The basic relation between force and
acceleration is found in Newton's second law of
motion and its verification is entirely
experimental.
![Page 7: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/7.jpg)
• Consider a particle subjected to constant forces
• We conclude that the constant is a measure of
some property of the particle that does not
change.
constaF
aF
aF
==== ...2
2
1
1
![Page 8: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/8.jpg)
• This property is the inertia of the particle which is its resistance to rate of change of velocity.
• The mass m is used as a quantitative measure of inertia, and therefore the experimental relation becomes,
F=ma
• This relation provides a complete formulation of Newton's second law; it expresses not only that the magnitude F and a areproportional but also that the vector F and a have the same direction.
![Page 9: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/9.jpg)
Equation of motion and solution of problems• When a particle of mass m acted upon by several forces. The
Newton’s second law can be expressed by the equation
• To determine the acceleration we must use the analysis used inkinematics, i.e
• Rectilinear motion
• Curvilinear motion
∑ = maF
![Page 10: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/10.jpg)
Rectilinear Motion• If we choose the x-direction, as the direction
of the rectilinear motion of a particle of mass m, the acceleration in the y and z direction will be zero, i.e
∑∑∑
=
=
=
0
0
z
y
xx
F
FmaF
![Page 11: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/11.jpg)
• Generally,
• Where the acceleration and resultant force are given by
ZZ
yy
xx
maFmaFmaF
=
=
=
∑∑∑
222zyx
zyx
aaaa
kajaiaa
++=
++=
( ) 222 )()( ∑∑∑∑
∑++=
++=
zyx
zyx
FFFF
kFjFiFF
![Page 12: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/12.jpg)
Curvilinear motion• In applying Newton's second law, we shall make
use of the three coordinate descriptions of
acceleration in curvilinear motion.
![Page 13: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/13.jpg)
Rectangular coordinates
Where and
∑∑
=
=
yy
xx
maFmaF
••
= xax
••
= yay
![Page 14: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/14.jpg)
Normal and tangential coordinate
• Where∑∑
=
=
tt
nn
maF
maF
••
=== vava tn ,22
ρβρ
![Page 15: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/15.jpg)
Polar coordinates
• Where and
∑∑
=
=
θθ maF
maF rr
2•••
−= θrrar
••••
+= θθ rran 2
![Page 16: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/16.jpg)
Examples
![Page 17: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/17.jpg)
Example 1• Block A has a mass of 30kg and block B has a mass of
15kg. The coefficient of friction between all plane
surfaces of contact are and .
Knowing that Ѳ=300 and that the magnitude of the
force P applied to block A is 250N, determine
a) The acceleration of block A ,and
b) The tension in the cord
15.0=sµ 10.0=kµ
![Page 18: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/18.jpg)
Example 2• A small vehicle enters the top A of the circular path with a
horizontal velocity vo and gathers speed as it moves down the path.
• Determine an expression for the angle β to the position where thevehicle leaves the path and becomes a projectile. Evaluate yourexpression for vo=0. Neglect friction and treat the vehicle as aparticle
![Page 19: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/19.jpg)
![Page 20: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/20.jpg)
Example 3• The slotted arm revolves in the horizontal about the fixed vertical axis
through point O. the 2 Kg slider C is drawn towards O at the constant
rate of 50mm/s by pulling the cord S. At the instant for which
r=225mm, the arm has a counterclockwise angular velocity ω=6rad/s
and is slowing down at the rate of 2rad/s2 .for this instant determine
the tension T in the cord and the magnitude N of the force exerted on
the slider by the sides of the smooth radial slot. Indicate which side, A
or B, of the slot contacts the slider. (problem 3/69)
![Page 21: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/21.jpg)
work and kinetic energy
![Page 22: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/22.jpg)
• The method of work and energy directly relates force, mass,
velocity, and displacement.
• We apply this method:
When intervals of motion are involved where the change in
velocity or the corresponding displacement of the particle is
required.
• Integration of the forces with respect to the displacement
of the particle leads to the equation of work and energy.
![Page 23: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/23.jpg)
Work of Force
( ) ( )dzFdyFdxF
kdjdidkFjFiFdU
FdsdUrdFdU
zyx
zyxzyx
++=
++•++=
=•=
αcos
![Page 24: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/24.jpg)
( )
( )∫
∫∫
∫
++=
==
•=
→
→
→
2
1
2
1
2
1
2
1
21
21
21
cos
A
Azyx
s
st
s
s
A
A
dzFdyFdxFU
dsFdsFU
rdFU
α
![Page 25: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/25.jpg)
( ) xFU ∆=→ αcos21
Work of a constant force in rectilinear motion
![Page 26: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/26.jpg)
yWyyWU
WyWyWdyU
WdydUy
y
∆−=−−=
−=−=
−=
→
→ ∫)( 1221
2121
2
1
When ∆y is negative (moves down), the work is positive
Work of the Force of Gravity
![Page 27: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/27.jpg)
Work of the Force Exerted by a Spring
( ) xFFU
kxkxkxdxU
kxdxFdxdUkxF
x
x
∆+−=
−=−=
−=−==
→
→ ∫
2121
22
2121
21
21
212
1
If the spring returning to the undeformed position, then positive energy
![Page 28: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/28.jpg)
Work of a gravitational Force
12221
2
2
2
1r
GMmr
GMmdrr
GMmU
drr
MmGFdrdU
rMmGF
r
r
−=−=
−=−=
=
∫→
![Page 29: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/29.jpg)
Kinetic Energy of a Particle
21
22 2
1212
1
2
1
mvmvvdvmdsF
mvdvdsFdsdvmv
dtds
dsdvm
dtdvmmaF
v
v
s
st
t
tt
−==
=
====
∫∫
2211
1221
TUTTTU
=+−=
→
→
![Page 30: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/30.jpg)
Power and Efficiency
• Friction energy dissipated by heat and reduce kinetic energy
inputpoweroutputpower
vFdt
rdFdt
dUpower
=
•=•
==
η
![Page 31: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/31.jpg)
Potential Energy
WyVVVU
WyWyWdyU
g
gg
y
y
=
−=
−=−=
→
→ ∫
2121
2121
)()(
2
1
When Vg2 >Vg1, potential energy increases, and U 1-2is negative
Potential Energy of the body with respect to the force of gravity
![Page 32: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/32.jpg)
rWR
rMmGV
rGMm
rGMmdr
rGMmU
g
r
r
2
12221
2
1
==
−=−= ∫→
R is from the center of the earth
it should be noted that the expression just obtained for the potential energy of a
body with respect to gravity is valid only as long as the weight of body can be
assumed to remain constant, i.e, as long as the displacements of the body are small
compared with the radius of the earth.
![Page 33: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/33.jpg)
2
2121
22
2121
21
)()(
21
212
1
kxV
VVU
kxkxkxdxU
e
ee
x
x
=
−=
−=−=
→
→ ∫
Potential Energy of the body with respect to the elastic force F
![Page 34: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/34.jpg)
Only the initial and final deflection of the spring are neededDeflection of the spring is measured from its undeformed position
![Page 35: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/35.jpg)
Equation of work and energy
ofsw UUUU
whereTU
21212121
21
→→→→
→
++=
∆=
Where =work done by other(non conservative/ pathdependant) forces
ofU 21→
EU
VVTU
TUVV
of
geof
ofeg
∆=
∆+∆+∆=
∆=+∆−∆−
→
→
→
21
21
21
![Page 36: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/36.jpg)
Advantages and disadvantages of work and energy method
• Advantage; 1. No need to calculate values between A1 and
A2. Only final stages are counted 2. All scalars so can be
added easily 3. Forces that do no work are ignored
• Disadvantage; can not determine accelerations, can not
determine accelerations and forces that do no work
![Page 37: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/37.jpg)
Example 1• For the slider collar shown in the figure, if m=0.5kg,
b=0.8m, and h=1.5m, and if the velocity of the collar as itstrikes the base B is 4.70m/s after the release of thecollar from rest, calculate the work Q of friction. Whathappens to the energy that is lost?
![Page 38: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/38.jpg)
• The 0.8kg collar slides with negligible frictionon the fixed rod in the vertical plane. If thecollar starts from rest at A under the action of8N horizontal force, calculate its velocity v asit hits the stop at B.
Example 2
![Page 39: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/39.jpg)
• The 6kg cylindrical collar is released from restin the position shown and drops onto the spring.Calculate the velocity v of the cylinder whenthe spring has been compressed 50mm.
Example 3
![Page 40: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/40.jpg)
• The two springs, each of stiffness k=1.2KN/m, are if equallength and un-deformed when θ=0. If the mechanism isreleased from rest in the position θ=20, determine itsangular velocity θ’ when θ=0. the mass m of each sphere is3kg. Treat the sphere as particles and neglect the massesof the light rods and springs.
Example 4
![Page 41: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/41.jpg)
Impulse and momentum
![Page 42: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/42.jpg)
• Work and energy is obtained by integrating theequation of F=ma with respect to thedisplacement of the particle.
• Impulse and momentum can be generated byintegrating the equation of motion (F=ma) withrespect to time.
![Page 43: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/43.jpg)
Linear impulse and momentum• Consider a particle of a mass m which
is subjected to several forces in space.
• The product of the mass & the velocityis defined as the linear momentum.
)1..(..........)( GForvmdtdvmF ∑∑ ===
vmG =
![Page 44: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/44.jpg)
• Equation (1) states that the resultant of allforces acting on a particle equals its time rateof change of linear momentum.
• It is valid as long as the mass m of the particleis not changing with time.
• The scalar components of equation (1) are:∑∑∑ === zzyyxx
GFGFGF ,,
![Page 45: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/45.jpg)
• The effect of the resultant force on the linearmomentum of the particle over a finite period of timesimply by integrating with respect to time t.
• The linear momentum at time t2 is G2=mV2 and the linearmomentum at time t1 is G1=mV1.
• The product of force and time is called linear impulse.
GGGFdt
dGFdtt
t
∆=−=
=
∫∑
∑2
1
12
∑ F
![Page 46: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/46.jpg)
• The total linear impulse on a mass m equals
the corresponding change in linear momentum
of m.
( ) ( )
( ) ( )
( ) ( )
−=
−=
−=
=+
∫∑
∫∑
∫∑
∫∑
12
12
12
21
2
1
2
1
2
1
2
1
zz
t
tz
yy
t
ty
xx
t
tx
t
t
mVmVdtF
mVmVdtF
mVmVdtF
GFdtG The impulse integral is a vector
Scalar impulse momentum eqns.
![Page 47: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/47.jpg)
Conservation of linear momentum• If the resultant force on a particle is zero
during an interval of time, its linear momentumG remains constant. In this case the linearmomentum of a particle is said to be conserved.
210 GGorG ==∆
![Page 48: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/48.jpg)
Angular impulse and momentum• The moment of a linear momentum vector
about the origin O is defined as the angularmomentum of P & is given by the productrelation for moment of vector:-
• The angular momentum then is a vectorperpendicular to the plane A defined by
vm
oH
vmrH ×=0
vr &
![Page 49: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/49.jpg)
• The scalar component of angular momentum
is:-
)()(),(
)()()(
yvxvmHxvzvmHzvyvmH
vvvzyxkji
mH
kyvxvmjxvzvmizvyvmvmrH
xyzzxyyzx
zyx
o
xyzxyzo
−=−=−=
=
−+−+−=×=
![Page 50: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/50.jpg)
• If represents the resultant of all forces acting on the particlesP, the moment Mo about the origin O is the vector cross product.
• The moment about the fixed point O of all forces acting on M equalsthe time rate of change of angular momentum of M about O.
∑ F
....(*)..........∑
∑ ∑
=
×+×⇒×+×=
×=×=
oo
o
o
HMvmrvmvvmrvmrH
vmrFrM
![Page 51: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/51.jpg)
• To obtain the effect of moment on the angular
momentum of the particle over a finite period of time;
• The product of moment & time is angular impulse the total
angular impulse on M about a fixed point O equals the
corresponding change in angular momentum of M about O.
112212
12
2
1
& vmrHvmrHwhere
HHHdtM
oo
ooo
t
to
×=×=
∆=−=∫∑
∑ oM
∫∑ =+2
1
21
t
tooo HdtMH
![Page 52: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/52.jpg)
Conservation of angular momentum• If the resultant moment about a fixed point O of all
forces acting on a particle is zero during the interval
of time, equation (*) requires that its angular
momentum H0 about that point remains constant.
210 ooo HHorH ==∆
![Page 53: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/53.jpg)
Impact
![Page 54: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/54.jpg)
Impact• Refers to the collision b/n two bodies
and is characterized by the generation
of relatively large contact forces that
act over a very short interval of time.
![Page 55: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/55.jpg)
Direct central impact• Consider the collinear motion of two spheres of masses m1
and m2 travelling with velocities V1 & V2. If V1 is greaterthan V2, collision occurs with the contact forces directedalong the line of centers.
![Page 56: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/56.jpg)
• In as much as the contact forces are equal& opposite during impact; the linearmomentum of the system remainsunchanged.
'' 22112211 vmvmvmvm +=+
![Page 57: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/57.jpg)
• For given masses & initial conditions, the momentumequation contains two unknowns, v1’ & v2’, an additionalrelationship is required.
• The relationship must reflect the capacity of thecontacting bodies to recover from the impact & can beexpressed by the ratio e of the magnitude of therestoration impulse to the magnitude of the deformationimpulse. This ratio is called the coefficient of restitution.
![Page 58: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/58.jpg)
• Fr – contact force during restoration period
• Fd – contact force during deformation period
( )[ ]( )[ ]
( )[ ]( )[ ] 2.....................''
1...............''
2
2
22
22
1
1
11
11
particleforvvvv
vvmvvm
dtF
dtFe
particleforvvvv
vvmvvm
dtF
dtFe
o
o
o
ot
td
t
tr
o
o
o
ot
td
t
tr
o
o
o
o
−−
=−−
==
−−
=−−−−−−
==
∫
∫
∫
∫
![Page 59: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/59.jpg)
• According to classical theory of impact, the value
e=1 means that the capacity of the two particles to
recover equal their tendency to deform.
• The value e=0, on the other hand describes
inelastic or plastic impact where the particles cling
together after collision & the loss of energy is a
maximum.
![Page 60: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/60.jpg)
b) Oblique central impact• Here the initial and final velocities are not parallel.
• The spherical particles of mass m1 & m2 have initialvelocities v1 & v2 in the same plane & approach each otheron a collision course.
• The direction of the velocity vector are measured fromthe direction tangent to the contacting surfaces.
![Page 61: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/61.jpg)
![Page 62: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/62.jpg)
( ) ( )
( ) ( ) ,cos,sin
,cos,sin
222222
111111
θθ
θθ
vvvv
vvvv
tn
tn
=−=
=−=
There will be four unknown namely, (v1’)n, (v1’)t, (v2’)n, & (v2’)t1) Momentum of the system is conserved in the n-direction,
2) & 3) The momentum for each particle is conserved in the t-
direction since there is no impulse on either particle in the t-
direction
tt
tt
vmvmvmvm
)'()()'()(
2222
1111
==
![Page 63: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/63.jpg)
3) the coefficient of restitution, the velocity component in the n- direction,
( ) ( )( ) ( )nn
nn
vvvv
e21
12 ''−−
=
![Page 64: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/64.jpg)
Example 1• The 4kg cart, at rest at t=0, is acted on by a
horizontal force that varies with time t asshown. Neglect friction and determine thevelocity of the cart at t=1Sec and t=3Sec
![Page 65: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/65.jpg)
Example 2• The loaded mine skip has a mass of 3Mg. The hoisting
drum produces a tension T in the cable according to thetime schedule shown. If the skip is at rest againest A awhen the drum is activated, determine the speed v of theskip when t=6Sec. Friction loss may be neglected.
![Page 66: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/66.jpg)
Example 3• a particle with a mass of 4kg has a position vector in
meters given by ,where t is the time inseconds. For t=3sec, determine the magnitude of theangular momentum of the particle and the magnitude ofthe moment of all forces on the particle, both about theorigins of the coordinates.
ktjtitr 323 2 −−=
![Page 67: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/67.jpg)
Example 4• A particle of mass m moves with negligible friction
on a horizontal surface and is connected to a lightspring fastened at O. At position A the particle hasthe velocity VA=4m/s. Determine the velocity VBof the particle as it passes position B.
![Page 68: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/68.jpg)
Example 5• The assembly of two 5Kg spheres is rotating freely about the vertical
axis at 40rev/min with θ=900. if the force F necessary to maintain the
given position is increased to raise the base collar and reduce θ to 600,
determine the new angular velocity ω. Also determine the work U done
by F in changing the configuration of the system. Assume that the mass
of the arms and the collars is negligible.
![Page 69: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/69.jpg)
Example 6• The magnitude and direction of the velocities of
two identical frictionless balls defore strike eachother are as shown in the figure. Assume e=0.90,
A) determine the magnitude and direction of the velocity ofeach ball after impact.
B) calculate the percentage loss of energy due to the impact.
![Page 70: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/70.jpg)
Example 7• Sphere A has a mass of 23Kg and a radius of 75mm while sphere
B has a mass of 4Kg and a radius of 50mm. If the spheres aretravelling initially along the parallel paths with the speedsshown, determine the velocities of the spheres immediatelyafter impact. Specify the angles θA and θB with respect to thex-axis made by the rebound velocity vectors. The coefficient ofrestitution is 0.4 and friction is neglected.
![Page 71: Engineering Mechanics-Dynamics: Kineticsof Particle](https://reader034.vdocuments.mx/reader034/viewer/2022052119/544b444eaf7959a8438b519d/html5/thumbnails/71.jpg)
Example 8• The 2Kg sphere is projected horizontally with velocity of 10m/s
against the 10kg carriage that is backed up by the spring with a
stiffness of 1600N/m. The carriage is initially at rest with the
spring uncompressed. If the coefficient of restitution is 0.6,
calculate the rebound velocity v’, the rebound angle, and the
maximum travel δ of the carriage after impact.