Download - e-portfolio-110216205120-phpapp02
About me
Certificates
Contact me
The E-PortfolioOf
NABILAH MOHAMAD HAFIZUDDIN
Industrial Training
CV
Transcript
Personal Characteristics
My Reflection
About Me….Welcome to my e-Portfolio…My name is Nabilah Binti Mohamad Hafizuddin. Originally from Selangor, Malaysia. I am a student in the Faculty of Mechanical Engineering at Universiti Teknologi Malaysia. My main field is Mechanical Aeronautics. Besides, I am especially interested in Japanese Language. I had taken Japanese Language class level 1 and 2 since I was in 2nd year in UTM. I also took the Japanese Language Proficiency Test level 4 (JLPT4) administered by Japan Educational Exchanges and Services to improve my Japanese Language skill. I hope it can help me as an advantage to use in wide variety of careers in future. As for my family, I have 6 siblings and I am the youngest. My hobby is swimming, playing badminton, travelling, watching Japanese drama and anime. I really enjoy eating spaghetti, pizza, macaroni and sushi. My life philosophy is“Whatever You Do, Do The Best, Otherwise Don’t Bother.”
BACK TO HOME
Certificates……
NEXT
DEGREE++ PROGRAMME
FUTSAL PIALA DATIN ZURAIDAH
JAPANESE LANGUAGE COURSE
PKK PROGRAMME
AERO CLUB PROGRAMME
ROBOCON
SAE PROGRAMME
SUKAM
Back to Home
BACK
BACK
BACK
BACK
BACK
BACK
BACK
BACK
TRANSCRIPT
Back to Home
BIRTH CERTIFICATE
SPM CERTIFICATE
MATRICULATION CERTIFICATE
MUET
Contact Me….
Home Address:No. 65, Batu 6, Sg. Lias, 45300, Sg. Besar, Selangor.
Phone No:013-6036504
E-mail:[email protected]@yahoo.com
Back to Home
Back to Home
INDUSTRIAL TRAINING
Company Profile
Work Description
Testimonial
Pictures
Project
COMPANY PROFILEIntroduction
History
Destinations
Locations
Organization Structure
Facilities
Hangar
Wheel Workshop
INTRODUCTIONAir Asia Berhad is a low-cost airline based in Kuala Lumpur,
Malaysia. It operates scheduled domestic and international flights and is Asia's largest low fare, no frills airline. Air Asia pioneered low cost travelling in Asia. It is also the first airline in the region to implement fully ticketless travel and unassigned seats. As of 5 February 2009, Air Asia has finally implemented allocated seats across all Air Asia flights, including in their sister airlines, Indonesia Air Asia and Thai Air Asia. Its main base is the Low Cost Carrier Terminal (LCCT) at Kuala Lumpur International Airport (KLIA). Its affiliate airlines Thai Air Asia and Indonesia Air Asia fly from Suvarnabhumi Airport, Thailand and Soekarno-Hatta International Airport, Indonesia respectively.
The Technical Headquarters of AirAsia is located at:AirAsia Berhad,LCC Terminal, Jalan KLIA S3,Southern Support Zone, KL International Airport,64000 KLIA Sepang,Selangor Darul Ehsan, Malaysia
Tel No : 603-8660 4333Fax No : 603-8775 1932 (Engineering)
HISTORYDecember 1993 – AirAsia Sdn Bhd was incorporatedNovember 1996 – AirAsia received its first B737 -300September 2001 DRB – HICOM entered into a Sale and Purchace
shareholding with TUNE AIR Sdn Bhd2003 - AirAsia opened a second hub at Senai
Airport, Johor Bahru.- Launced its first International flight to
Bangkok, Singapore and Indonesia.June 2004 - Started flight to Macau.April 2005 - Started flight to Mainland China ( Xiamen) and
Philippines ( Manila ).March 2006 - A new budget terminal opened
Air Asia operates over 200 flights a day, to over 75 domestic and international routes covering Malaysia, Thailand, Indonesia, Singapore, Brunei, Myanmar, the People's Republic of China, Vietnam, Laos, Cambodia, Australia, United Kingdom, India, Taiwan and the Philippines.
In 2007, 19 new routes had been introduced over the Air Asia wide network. These include routes from Kuala Lumpur to Gold Coast (Via Air Asia X), Vientiane, and Banda Aceh; and the connection of Southern China (Macau and Shenzhen) with different Malaysian hubs and Bangkok. In 2008, new routes were introduced which included destinations in India and China.
DESTINATION
LOCATIONFrom Nilai
From KL
Air Asia Bhd. Mezzanine Floor
Technical Publication SectionTechnical Publication Section
Technical Manual UnitTechnical Manual Unit
Flight Data SectionFlight Data Section
Drawing SectionDrawing Section
Modification SectionModification SectionManagement Information
System SectionManagement Information
System Section
System & Interior SectionSystem & Interior Section
Performance SectionPerformance Section
Avionics SectionAvionics Section
Power Plant SectionPower Plant Section
Structure SectionStructure Section
Reliability SectionReliability Section
Flight Operation Manual UnitFlight Operation Manual Unit
GROUP CHIEF EXECUTIVE OFFICER
Mr Tony Fernandes
GROUP CHIEF EXECUTIVE OFFICER
Mr Tony Fernandes
DIRECTOR OF ENGINEERING
Mr Azhari Dahlan
DIRECTOR OF ENGINEERING
Mr Azhari Dahlan
QUALITY ASSURANCE MANAGER
Mr Mohd Yusoffi Abu Bakar
QUALITY ASSURANCE MANAGER
Mr Mohd Yusoffi Abu Bakar
PLANNING/TECHNICAL RECORDS MANAGER - Mr Abdullah NoordinPLANNING/TECHNICAL RECORDS MANAGER - Mr Abdullah Noordin
MAINTENANCE MANAGER
Mr Aaron Johnson Yip
MAINTENANCE MANAGER
Mr Aaron Johnson Yip
MATERIALS MANAGER (PROCUREMENT & EFFICIENCY) - Mr
Aziz Yunus
MATERIALS MANAGER (PROCUREMENT & EFFICIENCY) - Mr
Aziz Yunus
CONTRACT & WARRANTY MANAGER
Mr Dennis Yap Tsong Hsih
CONTRACT & WARRANTY MANAGER
Mr Dennis Yap Tsong Hsih
PROJECTS MANAGER
Mr Anthony Tang
PROJECTS MANAGER
Mr Anthony Tang
TECHNICAL SERVICES MANAGER
Mr Nadzri Hashim
TECHNICAL SERVICES MANAGER
Mr Nadzri Hashim
FACILITIESThe main store is located in a double storey shop lot at Salak Tinggi. It consists of the quarantine store, bonded store, dope store, and a bulk bonded store and occupies the ground floor of three shop lots with a total space of approximately 420 m2.
HANGARAirAsia hangar facility is located at Taxiway Charlie, KLIA. It can house a B737 or A320 aircraft fully in. Its floor plan is 2300 m2.
WHEEL WORKSHOPAirAsia Wheel Workshop facility is located at Bandar Baru Salak Tinggi. Its layout is about 90 m2. It is secures with iron grill and security alarm (RESCOM).
Technical Services:•Power Plant Section
• Presentation on Flexible Takeoff (analyzed the relationship between aircraft gross weight and runway length of 14 Airports in Malaysia.)
• Able to read and interpreted Service Bulletin on Engine Fuel and Control-Hydro Mechanical Unit.
• Able to understand Take-Off Chart.•Interior and System Section
• Experienced in using the AMOS AirAsia Production Database Software (Maintenance, Repair & Overhaul Software).
• Able to understand Airworthiness Directive.• Experienced in preparing Engineering Instruction on Fire Protection – Inspect and Clean
the Flow Metering System and Plumbing.• Review ETOPS (Extended-Range Twin Engine Operation Performance Standard)• Involved in the Unscheduled Removal analysis of Electric Motor Pump on 9M-AFD.
Technical Publication:• Able to read and updated FCOM vol 1-4 (System Description, Flight Preparation, Flight
Operation, FMGS Pilot’s Guide).• Provide technical document onboard as required by aviation authority.• Prepared technical documents to distribute to necessary recipient.
WORK DESCRIPTION
PROJECTChecked every part listing of high-pressure compressor (HPC) 4-9 spools from Air Asia Berhad and verify if any match of part number (P/N) and serial number (S/N) with the list in Airworthiness Directive (AD) from FAA (Federal Aviation Administration) issued in Burlington, Massachusetts on May 13, 2009. If it matches, the engine parts need to remove from the specific aircraft and report it into the Technical Document Evaluation (TDE) form. This is to prevent cracking of the HPC 4-9 spool, which could result in possible uncontained failure of the spool and damage to the airplane.
Calculated the average Flex Takeoff ( flexible takeoff) of about 39 airplanes of Malaysia AirAsia which also noted as 9M, 9 airplanes of Thailand Air Asia (HS) and 6 airplanes of Indonesia AirAsia (PK) that been used by pilots from January 2009 until May 2009. The benefit of using flex takeoff thrust is that it save the engine life by reduces the engine stress and thus it can reduce maintenance cost.
FLEX TAKEOFF PRESENTATION
PICTURES
NEXT
CURRICULAR VITAE ( CV)
Back to Home
Slides
Word
Nabilah Binti Mohamad Hafizuddin
Career Objective
Seeking a full-time position in any related industry for fresh Mechanical Engineering (Aeronautics) graduate.
Contact Details
Address : No.65, Batu 6, Sungai Lias, 45300, Sungai Besar, Selangor, Malaysia.Mobile No. : +60136036504Email : [email protected]
Personal Particulars
Age : 24 years Date of Birth : 30 January 1986Nationality : MalaysiaGender : FemaleMarital Status : SingleIC No. : 860130105506Permanent Residence : Malaysia
Qualification
Qualification : Bachelor's Degree with HonoursField of Study : Engineering (Mechanical-Aeronautics)Institute/University : Universiti Teknologi Malaysia, Johor, MalaysiaCGPA : 2.73/4.00Graduation Date : May 2010
Qualification : MatriculationField of Study : Science (Physical)Institute/University : Pusat Asasi Sains Universiti Malaya (PASUM), Kuala LumpurCGPA : 3.67/4.00Graduation Date : 2005
Qualification : Sijil Pelajaran Malaysia (SPM)Field of Study : ScienceSchool/Institute : Maktab Rendah Sains Mara (MRSM) Taiping, Perak, MalaysiaResult : 3 A1 5 A2 2 B3Year Taken : 2003
Qualifacion : Penilaian Menengah Rendah (PMR)Field of Study : ScienceSchool/Institute : Maktab Rendah Sains Mara (MRSM) Kuala KlawangResult : 8AYear Taken : 2001
Skill Years ProficiencyMicrosoft Office 10 AdvanceAutoCAD 3 IntermediateMatLab 3 IntermediateSolidWork 3 IntermediateFluent 6.3 software 1 BeginnerNastran 1 Beginner
Language Spoken WrittenBahasa Malaysia 10 10English 7 7Japanese 4 4
(Proficiency: Advanced - Highly experienced; Intermediate - Familiar with all the basic functionalities; Beginner - Just started using or learning the skill)
Skills
Languages
(Proficiency: 0=Poor - 10=Excellent)
Trainee, Engineering Technical Services Department, AirAsia Berhad, LCC Terminal Sepang. May 2009 - July 2009Work Description:*Assisted engineers in Technical Publication Engineering Department to manage in administering and updating the technical publication documents issued by the department and external organization such as the aviation authorities, manufacturers, and suppliers. *Assisted engineers in Technical Services Department for providing technical support for the aircraft operation and maintenance.Project Description:* Checked every part listing of high-pressure compressor (HPC) 4-9 spools from Air Asia Berhad and verify if any match of part number (P/N) and serial number (S/N) with the list in Airworthiness Directive (AD) from FAA (Federal Aviation Administration) issued in Burlington, Massachusetts on May 13, 2009. If it matches, the engine parts need to remove from the specific aircraft and report it into the Technical Document Evaluation (TDE) form. This is to prevent cracking of the HPC 4-9 spool, which could result in possible uncontained failure of the spool and damage to the airplane.* Calculated the average Flex Takeoff ( flexible takeoff) of about 39 airplanes of Malaysia AirAsia which also noted as 9M, 9 airplanes of Thailand Air Asia (HS) and 6 airplanes of Indonesia AirAsia (PK) that been used by pilots from January 2009 until May 2009. The benefit of using flex takeoff thrust is that it save the engine life by reduces the engine stress and thus it can reduce maintenance cost.
Industrial Training
Project 1: Research on development of a glove for Tremor for final year degree project*Description: Designed a glove that can reduce the vibration on Tremor (Parkinson) patient’s hand. A piezoelectric actuator was used on the glove in order to control the vibration on the hand by producing a counteract vibration to the hand’s vibration. The electronic equipment for the glove is accelerometer where it is to measure acceleration on hand. By experiments, model of fake hand will be vibrating by electric motor and reading from the accelerometer and micro sensor will be converting into ‘labview” program to get the difference between acceleration and displacement of the hand. The data will be interpreted by using MatLab when the hands were applied with piezoelectric.
Project 2: Design UAV for aircraft design subject*Description: This design project was done step by step in class designing proses. This project start from conceptual design until analyzing the design. The process involving a parametric study, estimating the weight, component weight estimation, aerodynamic calculation, center of gravity calculation, wing design, propulsion calculation, performance calculation and frame and structure design. The design process was done in 1 year.
Academic Projects
TRAINING / SEMINARS ATTENDED DURING THE UNIVERSITY PERIOD:
1. Degree++ Programme – ISO 9001:2008 Internal Audit Course Date : 27th – 28th February 2010 Vanue : CICT, UTM, Skudai Johor, Malaysia2. Degree++ Programme – ISO 9001:2008 Quality Management System Requirement Date : 16th -17th January 2010 Vanue : CICT, UTM, Skudai, Johor, Malaysia3. Degree++ Programme – How to Get Yourself Employed Date : 19th – 20th July 2008 Vanue : Seminar Hall, Faculty of Mechanical Engineering, UTM4. Introduction to Flight Simulation Programme Date : 25th March 2009 Vanue : Computer Lab, Faculty of Mechanical Enineering, UTM5. Air Experience Flight For Introductory Flight on CESSNA 172 Date : 3rd – 4th May 2009 Vanue : Elite Flying Club, Senai, Johor6. ‘Campus Survival’ Workshop Date : 7th February 2009 Vanue : DK1 L50, UTM, Skudai7. SAE UTM ‘Our Car Our Future’ Seminar Date : 16th September 2007 Vanue : Rumah Alumni, UTM, Skudai
Training / Seminar Attended During The University Period
Extra Curricular Activities
2009 - Deputy Director of Air Experience Flight For Introductory Flight on CESSNA 172 Program on 3rd-4th May 2009 at ELITE FLYING CLUB, Senai, Johor.
- Member of IEM (THE INSTITUTION OF ENGINEERS, MALAYSIA)2008 - Treasurer UTM ROBOCON 2007/2008.
- 2nd RUNNER-UP ‘Govinda’ ROBOCON MALAYSIA ROBOT CONTEST 2008 on 30th March 2008 at UKM, Bangi.
- 1st RUNNER-UP Women Hockey representing 9th College in ‘Kejohanan Sukan AntaraKolej Mahasiswa’ SUKAM XVI 2008
- Member of IEM (THE INSTITUTION OF ENGINEERS, MALAYSIA)- Member of SAE-UTM (SOCIETY OF AUTOMOTIVE ENGINEERS)
2007 - Treasurer UTM ROBOCON 2006/2007.- CHAMPION in ‘Ha Long Bay Discovery’ ROBOCON MALAYSIA ROBOT
CONTEST 2007 on 29th May 2007 at UKM, Bangi.- 2nd RUNNER-UP representing Malaysia in the 6th ABU ASIA-PASIFIC ROBOT
CONTEST 2007 VIETNAM on 26th August 2007 at Quan Ngua Sports Palace Hanoi, Vietnam.
- MABUCHI MOTOR AWARD representing Malaysia in the 6th ABU ASIA-PASIFIC ROBOT CONTEST 2007 VIETNAM on 26th August 2007 at Quan Ngua Sports Palace Hanoi, Vietnam.
- 2nd RUNNER-UP Women Hockey representing 9th College in ‘Kejohanan Sukan Antara Kolej Mahasiswa’ SUKAM XV 2007
Job PreferencesExpected Monthly Salary : NegotiableWilling to Travel : YesWilling to Relocate : YesPossess Own Transport : YesReferenceName : Md Nizam DahlanRelationship : Academic AdviserPosition : Senior Lecturer, Universiti Teknologi MalaysiaTel : 07-5534692
PERSONAL CHARACTERISTICS
Adventurous
Calm
Considerate
Generous
Helpful
Independent
Outgoing
Patients
Quiet
Active
BACK TO HOME
My Reflection
During my childhood, I was an active girl. Since primary school, I always represented my school in sports such as netball, handball, hockey and taekwondo. I also was a prefect in my school. But as a prefect I did not like to judged and penalized pupil blindly as I am calm and considerate.
When I was 13 years old, I entered a boarding school which is MRSM in Jelebu, Negeri Sembilan. I learned to be independent from there as I was far from my family. I was also active during my secondary school especially in co-curriculum activities such as Karate-do, Entrepreneurship Club and Scout.
I love adventurous activities such as jungle tracking and camping. As a scout, I got so many opportunities to do such activities. The most unforgettable activity as a scout was jungle tracking and camping in Pulapah, Negeri Sembilan.
I continue my study in UTM Skudai after finished one year matriculation in Universiti Malaya. My major is Mechanical Aeronautic Engineering. I wish to be an aeronautics engineer one day. During my first year, I join ROBOCON UTM which I developed many skills that I cannot find in lecture such as programming, electronic circuits as well as team working. I had so many good memories with ROBOCON especially when we managed to be the champion during national competition at UKM. We also represent Malaysia for international ROBOT contest competition at Hanoi, Vietnam and we did Malaysia proud as we won 3rd place and Mabushi Award which is a special award from the sponsor.
My university life was busy yet interesting and unforgettable. There are so many things I want to do and achieve in my life. From now on, I will do my best to achieve successful in my life.
BACK TO HOME