Marinfloc AB, Industrivägen 10 , 472 95 Varekil, Sweden
Phone: +46 (0)304 606300
Fax +46 (0)304 10051
E-mail: [email protected]
Webb: www.marinfloc.com
Made in Sweden
by Marinfloc
DD
MD
Rev
1 2
01
5-0
4-2
8
Drain Separator - DD5
Main data
Capacity of treated Oily Water Max 5000litres/hour
Operating temperature of Slop Water Optimal: + 20 - 30°C
Operating pressure 0,25-0,4 MPa(g) / 2,5-4 bar(g)
Test pressure 0,78 MPa(g) / 7,8 bar(g)
Safety valve release (Filters, Oil desc, Circ tank) 0,60 MPa(g) / 6 bar(g)
IP-class IP 54
Voltage supply 3 ph 400/440/690 Vac, 50-60 Hz
Fuse 10 A
Electric Power Consumption 4,3 kW
General Service Air Pressure 0.6-0.9 MPa(g) 6-9 bar(g)
General Service Air Consumption < 23 normal liters/second
Total net weight inc. Filter media (dry) 2266 kg
Total operating weight 4116 kg
Water Technical Fresh Water, 4-8 bar
Fresh water consumption 750 liters/ back flush cycle
Ex-class Zone 2
Electrical Backflushing Heater 67C 64kW
Pos Denomination Dim Thread Flange Material Direction
I Oilrelease DN40 PN 16, ISO, DIN2633 Steel Outlet
II Feed pump suction DN50 PN 16, ISO, DIN2633 Steel Inlet
III Return to drain holding tank DN32 PN 16, ISO, DIN2633 Steel Outlet
IV Not in use
V Not in use
VI Fresh water connection DN32 PN 16, ISO, DIN2633 Steel Inlet
VII Cleaned water overboard discharge DN 40 PN 16, ISO, DIN2633 Steel Outlet
VIII G/S air for air distribution unit DN15 PN 16, ISO, DIN2633 Steel Inlet
IX To flocculent residue sludge tank DN25 PN 16, ISO, DIN2633 Steel Outlet
Overview connections and main dimensions
1800+/-5
