Download - Draft European Standard PrEN 50561-3
DRAFTEUROPEAN STANDARD prEN 50561-3
NORME EUROPENNE
EUROPISCHE NORM February 2014
ICS
English version
Powerline communication apparatus used in low-voltage installations Radio disturbance characteristics Limits and methods of measurement Part 3: Apparatus operating above 30 MHz
To be completed To be completed
This draft European Standard is submitted to CENELEC members for CENELEC enquiry. Deadline for CENELEC: 2014-07-25.
It has been drawn up by CLC/TC 210.
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
CENELECEuropean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Project: 24718 Ref. No. prEN 50561-3:2014 E
1 Contents Page
2 Foreword ...........................................................................................................................................................3
31Scope ....................................................................................................................................................4
42Normative references ..........................................................................................................................4
53Terms and definitions..........................................................................................................................5
64Requirement for the frequency range below 30 MHz.......................................................................6
74.1Requirement for conducted disturbances at AC mains power port..........................................................6
84.2Requirement for conducted disturbances at telecommunication/network port ........................................6
94.3Requirement for conducted disturbances and communications signals at PLC ports ............................6
105Requirement for the frequency range above 30 MHz.......................................................................7
115.1Requirement for conducted disturbances and communications signals for frequencies
12between 30 MHz and 87,5 MHz ...............................................................................................................7
135.2Requirement for conducted disturbances for frequencies between 87,5 MHz and 240 MHz ..................7
145.3Requirement for radiated disturbances for frequencies above 30 MHz ...................................................9
156Measurement conditions for PLC ports ............................................................................................9
166.1Operation conditions.................................................................................................................................9
176.2Unsymmetric conducted emission measurements and dynamic power control between 30
18and 87,5 MHz ...........................................................................................................................................9
197Measurement Uncertainty .................................................................................................................10
208Bibliography .......................................................................................................................................11
21 Annex A (normative) Excluded frequency ranges .....................................................................................12
22
23 Tables
24 Table 1 - Maximum unsymmetrical PLC transmit signal level between 30 and 87,5 MHz except for the25 frequency bands listed in Table A.1 ...............................................................................................726 Table 2 - Maximum conducted unsymmetrical disturbance signal level in the frequency bands listed in27 Table A.1 for services requiring increased protection....................................................................728 Table 3 - Maximum conducted unsymmetrical disturbance signal level ............................................................7
29 Table A.1 - Permanently excluded frequency ranges above 30 MHz ..............................................................1230
31 Figures
32 Figure 1 - Maximum conducted disturbance signal level for frequencies between 30 and 240 MHz. ..............8
33 Figure 2 - Voltage level at AMN over attenuation between EUT and AE (linear attenuation scale). ................834 Figure 3 - Example of a test arrangement for measuring the conducted unsymmetrical voltages of35 the transmitted PLC signal with example of coupling device .........................................................10
prEN 50561-3:2014-3-
36
37 Foreword
38 This document (prEN 50561-3:2014) has been prepared by Technical Committee CLC/TC 210,39 "Electromagnetic compatibility (EMC)".
40 This document is currently submitted for CENELEC enquiry.
41 This European Standard has been prepared under a mandate given to CENELEC by the European42 Commission and the European Free Trade Association and covers essential requirements of EN43 Directive(s).
44 For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this45 document.
46 Annex ZZ will be provided at a later stage.
47 The scope is extended to the whole radio-frequency range from 9 kHz to 400 GHz, but limits are formulated48 only in restricted frequency bands, which are considered sufficient to reach adequate emission levels to49 protect radio broadcast and telecommunication services and to allow other apparatus to operate as intended50 at reasonable distance.
51
52
53 Sentences in red-Italic are for information only, and are not intended to be part of the standard
54 1 Scope
55 This part of EN 50561 specifies limits and methods of measurement of radio disturbance characteristics for56 in-home communication apparatus that use the low voltage power installation as the transmission medium.57 This part of EN50561 applies to equipment that uses frequencies including those above 30MHz in order to58 communicate.5960 Equipment communicating exclusively in the frequency range from 1,6065 MHz to 30 MHz is covered in EN61 50561-1.6263 The requirements specified in this document are applicable for apparatus using frequencies of transmission64 up to 87.5 MHz.6566 NOTE: a signal level mask will ensure sufficient decay to adequately protect the reception of radio services (see figure67 1).6869 Procedures are given for the measurement of signals generated by the equipment and limits are specified for70 the frequency range 9 kHz to 400 GHz. No measurement is required at frequencies where no limits are71 specified.
72
73 2 Normative references
74 The following documents, in whole or in part, are normatively referenced in this document and are75 indispensable for its application. For dated references, only the edition cited applies. For undated references,76 the latest edition of the referenced document (including any amendments) applies.
77 EN 50561-1:2013, Power line communication apparatus used in low-voltage installations - Radio disturbance78 characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use
79 EN 55032:2012, Electromagnetic compatibility of multimedia equipment - Emission requirements
80 EN 55016-1-1:2010 + A1:2010, Specification for radio disturbance and immunity measuring apparatus and81 methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
82 EN 55016-1-2:2004 +A1:2005 + A2:2006, Specification for radio disturbance and immunity measuring83 apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary84 equipment - Conducted disturbances (CISPR 16-1-2:2003 + A1:2004 + A2:2006)
85 EN 55016-1-4:2010 + A1:2012, Specification for radio disturbance and immunity measuring apparatus and86 methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for87 radiated disturbance measurements (CISPR 16-1-4:2010 + Cor. 1:2010 + A1:2012)
88 EN 55016-4-2:2011, Specification for radio disturbance and immunity measuring apparatus and methods -89 Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty (CISPR 16-90 4-2:2011)
91
92 3 Terms and definitions
93 For the purposes of this document, the following terms and definitions apply:
94 3.195 AC mains power port96 port that connects to the low voltage AC mains power network for the sole purpose of supplying electrical97 energy to the EUT
9899100
3.2AC mains output portport of the EUT that provides AC mains power to other apparatus
101102103104105106
3.3Artificial Mains NetworkAMNprovides a defined impedance at high frequencies across the power feed at the point of measurement of the terminal voltage, and also providing isolation of the circuit under test from the ambient noise on the power lines.
107108
Note 1 to entry: Such a network is with a nominal impedance of 50 / 50 H or 50 / 50 H + 5 is definedEN 55016-1-2:2004, 4.3
109110111112113114
3.4Associated EquipmentAEequipment needed to maintain the data traffic on the cable attached to the EUT port under test and (or) to maintain the normal operation of the EUT during the test. The associated equipment may be physically located outside the test area
115116117
Note 1 to entry: The AE can be another ITE, a traffic simulator or a connection to a network. The AE can be situated close to the measurement set-up, outside the measurement room or be represented by the connection to a network. AE should not have any appreciable influence on the test results.
118119120121
3.5Equipment Under TestEUTrepresentative equipment used for evaluation purposes
122123124125
3.6in-Home PLC apparatusPLC apparatus that connects to the low voltage AC mains power network and intended to be linked to otherPLC apparatus connected in the same home
126127128129
3.7Information Technology EquipmentITEany equipment:
130131132
a) which has a primary function of either (or a combination of) entry, storage, display, retrieval, transmission, processing, switching, or control, of data and of telecommunication messages and which may be equipped with one or more terminal ports typically operated for information transfer;
133
b) with a rated supply voltage not exceeding 600 V.
134135
Note 1 to entry: ITE includes, for example, data processing equipment, office machines, electronic business equipment and telecommunication equipment.
136137
Note 2 to entry: Any equipment (or part of the ITE equipment) which has a primary function of radio transmission and/or reception according to the ITU Radio Regulations are excluded from the scope of this European Standard.
138139
Note 3 to entry: Any equipment which has a function of radio transmission and/or reception according to the definitions of the ITU Radio Regulations should fulfill the national radio regulations, whether or not this publication is also valid.
140141142
3.8PLC apparatusapparatus with a PLC port
143
Note 1 to entry: PLC apparatus are also called PLT apparatus
144145146147
3.9PLC portport that connects to the low voltage AC mains power network for the purpose of data transfer and communications, and may also supply electrical energy to the EUT
148
Note 1 to entry: PLC ports are also called PLT ports
149150151
3.10user datadata originated from or destined to another device
152153154155156157
3.11telecommunications/network portpoint of connection for voice, data and signalling transfers intended to interconnect widely-dispersed systems via such means as direct connection to multi-user telecommunications networks (e.g. public switched telecommunications networks (PSTN) integrated services digital networks (ISDN), x-type digital subscriber lines (xDSL), etc.), local area networks (e.g. Ethernet, Token Ring, etc.) and similar networks
158159160161
NOTE 1 to entry: A port generally intended for interconnection of components of an ITE system under test (e.g. RS-232, IEEE Standard 1284 (parallel printer), Universal Serial Bus (USB), IEEE Standard 1394 (Fire Wire), etc.) and used in accordance with its functional specifications (e.g. for the maximum length of cable connected to it), is not considered to be a telecommunications/network port under this definition.
162
163
NOTE 2 to entry: A PLT port is not considered a telecommunications network port in the sense of this definition.
164
4 Requirement for the frequency range below 30 MHz
165
4.1 Requirement for conducted disturbances at AC mains power port
166167
The AC mains power port of the EUT shall comply with the class B limits, using the measurement conditions and the methodology defined in EN 55032 for mains terminals.
168
4.2 Requirement for conducted disturbances at telecommunication/network port
169170
The telecommunications/network port of the EUT shall comply with the class B limits, using the measurement conditions and methodology defined in EN 55032 for these ports.
171172
4.3 Requirement for conducted disturbances and communications signals at PLCports
173174
The methods and limits for conducted measurements of EN 50561-1 apply for PLC apparatus for measurement frequencies 30 MHz and below.
175176177
This section refers to EN 55032 for tests common to all types of ITE, as well as EN 50561-1, which refers toEN 55022 for such tests. According to the EMCD, both EN 55022 and EN 55032 are equally valid, until EN55022 is definitely repealed, in March 2017. This will be clarified in the final version.
178
5 Requirement for the frequency range above 30 MHz
179180
5.1 Requirement for conducted disturbances and communications signals for frequencies between 30 MHz and 87,5 MHz
181182183184
When user data is being transmitted by the PLC port at frequencies between 30 and 87,5 MHz the unsymmetrical voltage of the transmitted signal shall not exceed the limits given in Table 1 using the methods and procedures given in clause 6.2, with the exception of the frequency bands listed in Tables A.1 for which the limits for the unsymmetrical disturbances specified in Table 2 apply.
185
186
Unless otherwise noticed, limits are given in dB(V) (PK) in a 120 kHz bandwidth.
187188
Table 1 - Maximum unsymmetrical PLC transmit signal level between 30 and 87,5 MHz except for the frequency bands listed in Table A.1
Symmetrical mode insertion loss EUT to AE in dB 1025 40
Maximum unsymmetrical voltages of the transmitted signal from 30 to 80 MHz, in dBV (PK)808590
Maximum unsymmetrical voltages of the transmitted signal from 80 to 87.5 MHz in dB(V) (PK)80 to 60 (see note 4)85 to 60 (see note 4)90 to 60 (see note 4)
NOTE 1: The Voltage Division Factor of the Coupling device must be taken into account. NOTE 2: The total symmetrical voltage is 6 dB above the maximum unsymmetrical voltage.NOTE 3: The transmit power management function of an AE should function in the same way as the EUTotherwise the signal of the AE may dominate and cause erroneous results during measurement. NOTE 4: The limit decreases linearly with the frequency in the range 80 to 87,5 MHz
189
190191
Limits for 10 dB attenuation in table 1 are based on protection levels provided by EN 55022 and EN 55032 (for radiated emissions in that frequency range).
192193
Table 2 - Maximum conducted unsymmetrical disturbance signal level in the frequency bands listed in Table A.1 for services requiring increased protection
Maximum unsymmetrical voltages of the transmitted signal indB(V) (PK) 55NOTE 1: The Voltage Division Factor of the Coupling device must be taken into account. NOTE 2: The total symmetrical voltage is 6 dB above the maximum unsymmetrical voltage.
194
195
Need an AMN working at those frequencies
196197
5.2 Requirement for conducted disturbances for frequencies between 87,5 MHz and 240MHz
198199
The unsymmetrical disturbances from the PLC port when transmitting user data shall comply with the disturbance limits between 87,5 and 240 MHz.
200
Table 3 - Maximum conducted unsymmetrical disturbance signal level
Maximum unsymmetrical voltages of thetransmitted signal in dB(V) (PK) 60
NOTE 1: The Voltage Division Factor of the Coupling device must be taken into account. NOTE 2: The total symmetrical voltage is 6 dB above the maximum unsymmetrical voltage.100
90
80
70
60level in dB(V) - peak detector values
201
5030 40 50 60 70 74.8 80 87.5 100 108
frequency in MHz
202
Figure 1 - Maximum conducted disturbance signal level for frequencies between 30 and 240 MHz.
203
NOTE: The value of 60 dB(V) continues from 87.5 MHz to 240 MHz
100
90
80
70
60level in dB(V) - peak detector values
204
500 10 20 25 30 40 50 60 70
sym. attenuation between EUT and AE in dB at 100 Ohms impedance
205
206
Figure 2 Maximum voltage level at AMN over attenuation between EUT and AE (linear attenuation scale).
207
208
5.3 Requirement for radiated disturbances for frequencies above 30 MHz
209210211
When no user data is transmitted the EUT shall comply with the class B limits for measurement conditions and methodology defined in EN 55032 for radiated disturbances for frequencies between 30 MHz and87,5 MHz
212213
214
In all operation conditions, the EUT shall comply with class B limits for measurement conditions and methodology defined in EN 55032 for radiated disturbances for frequencies above 87,5 MHz.
215
6 Measurement conditions for PLC ports
216
6.1 Operation conditions
217218
The measurements of PLC ports shall be performed in conformance with EN 55032:2012, Annex B.3, tableB.3
219220221222223
Tests requiring the PLC modem function to be active shall be performed with the condition of PLC utilization in excess of 10 % and with the transmit signal set at its maximum level for a minimum of 250 ms. As an example the transmission of a large data file could be used to exercise the port. Where this is not possible an appropriate configuration should be used that ensures the PLC transmission is active for long enough to allow for repeatable measurements in this state.
224
No connection shall be made to any AC mains output port.
225226
6.2 Unsymmetric conducted emission measurements and dynamic power control between30 and 87,5 MHz
227228229230231232
The symmetrically transmitted signals from the PLC port of the EUT shall be measured for frequencies between 30 and 87,5 MHz in order to ensure the maximum transmit signal levels are not exceeded and to ensure the presence of a dynamic power control function. The PLC port shall be exercised in accordance with the operating conditions given in Clause 6.1. Measurements shall be made using a Peak detector in accordance with the requirements of EN 55016-1-1 including the 120 kHz requirement for the 6 dB bandwidth.
233234235236
An example of a test arrangement, which avoids the use of a balun, is given in Figure 6.1. In this arrangement the two unsymmetrical voltages VL and VN shall be measured and compared with the limit values given in Tables 1, 2 and 3. In a symmetrical system they are equal in magnitude and of opposite phase. Each of them represents half of the total symmetrically transmitted signal.
237
The following configurations shall be assessed:
238
239240241
Measurements according to clause 5.1
1 with a symmetrical insertion loss between EUT and AE of 10 dB2 with a symmetrical insertion loss between EUT and AE of 25 dB3 with a symmetrical insertion loss between EUT and AE of 40 dB
242
243
Measurements according to clause 5.2 and 5.3
1 with a symmetrical insertion loss between EUT and AE of 40 dB
1.2 uH
L 470 p
71.2 470 p10 dB
L
additional attenuator
EUT VL
46.3
RX
attenuator cell
96.3
cells, depending 1.2 uH
insertion loss
AE
470 p50 Ohm
1.2 uH
N470 p
71.2 470 p10 dB
N
additional attenuator1.2 uH
46.3
VNRX
attenuatorcell
96.3
cells, depending insertion loss50 Ohm
1.2 uH
470 p
E(if equipped with protection earth)
470 p
96.3
71.210 dB attenuator cell
470 p
96.3
additional attenuator cells,1.2 uH
depending insertion loss
E(if equipped with protection earth)Coupling device
E N L244
Mains
245246
Figure 3 - Example of a test arrangement for measuring the conducted unsymmetrical voltages of the transmitted PLC signal with example of coupling device
247
NOTE 1: The Voltage Division Factor as defined in EN 55016-1-2 of this Coupling device: 20*log (50 / 96,3) = - 5.7 dB
248
NOTE 2: In case only one receiver (RX) is used at a time, the unused interface shall be terminated with 50 .
249
7 Measurement Uncertainty
250251
The results of measurements of signals or disturbances from PLC apparatus shall reference the measurement instrumentation uncertainty considerations where they are contained in EN55016-4-2.
252253254255256
257
Determining compliance with the limits in this standard shall be based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. However, the measurement uncertainty of the measurement instrumentation and its associated connections between the various instruments in the measurement chain shall be calculated and both the measurement results and the calculated uncertainty shall appear in the test report.
258Bibliography
259
260The Radio Regulations, Edition of 2012, ITU.
261
262263264
265
Annex A(normative)Excluded frequency ranges
266
Table A.1 - Permanently excluded frequency ranges above 30 MHz
Excluded frequency range (MHz)Service
50 52Amateur Radio Service
70-70.5Amateur Radio Service
74.8 75.2Aeronautical Radio Navigation
144 146Amateur Radio Service
267268269
Note: additional frequency exclusions might be required in some countries (police/fire brigade/safety services)
270
271
Aeronautical band above 108 MHz may need to be added