Headquarters in Prague, Czech RepublicTel.: +420 261 219 182, Fax: +420 261 219 192
[email protected], www.conteg.com
Austria +43 2243 21203Czech Republic +420 261 219 182Eastern Europe +49 172 848 4346France +33 686 074 386Germany, Switzerland +49 170 523 4958Middle East +971 50 871 4563Russia +7 495 506 13 28Western Europe +420 261 219 182
Optical pathway system - OptiWay
CONTEG, spol. s r.o., Na Vítězné pláni 1719/4, 140 00 Prague 4, Czech Republic
Data Sheet 05_03_2010, CONTEG ©
OptiWay is designed to provide a safe, easy to use and cost effective management system for your fragile optical cables. OptiWay allows you to route fiber optic cables among equipment and provides the physical protection and bend radius management that is crucial to optical cable performance. Constructed of halogen free PC/ABS material OptiWay can be used to protect your cabling from the point of building entry right up to the terminal devices. The OptiWay system is fully modular giving you unrivalled flexibility in your chosen layout, whether a new build or refurbishment project.
KEY FEATURESQuick and easy installation OptiWay enables easy, simple and quick installation. Any kind of design, as required by the specific needs of the data center, can be created in shortest possible installation time.
No special tools requiredOptiWay couplers can be connected with any straight or curved ducting part by hand only so no special tools are needed. This saves time and makes the installation even easier.
High-quality materialOptiWay system is made of PC/ABS that provides the final product with ex-cellent durability, heat stability and re-sistance to deformation. The material is halogen free and flame retardant.
Easy drop arrangementSpill-over exits can be easily positioned and moved without the need to cut the ducting body using tools.
OptiWay helps to ensure the maximum performance of your installed fibre optic cabling plant and can also be used for the support of delicate copper transmission cables, such as Category 6A. When properly designed and installed, OptiWay offers an excellent method of managing the high volume of fragile network cabling found in today’s data centers.
APPLICATIONS
CONTEG fully respects the customer’s right to create an individual solution using different vendors and their products. OptiWay has been designed considering that the compatibility with other brand ducting systems is one of the major requirements. The compatible design allows the end user to reduce the extra cost and simply complete the installation of other ducting system with OptiWay.
COMPATIBILITY DESIGNED IN!
CONTEG, spol. s r.o., Na Vítězné pláni 1719/4, 140 00 Prague 4, Czech Republic
The main duct is an extruded 2 metre long conduit and can be connected with any other OptiWay products using joiners. The duct can be easily cut to length on site. Color: Yellow. Please note that Main ducts are delivered in two pieces per box. The carton box includes 2 x 2metres of Main duct. For more information please see last page ordering and shipping information.
MAIN DUCT
CodeInner duct size in mm
Length in mmH W
OPW-16MD2M-YL 100 160 2000OPW-30MD2M-YL 100 300 2000
CoversOPW-16MD2MC-YL - 160 2000OPW-30MD2MC-YL - 300 2000
The Cross is used to establish a 4 way right angled intersection. 4 joiners are required per cross. Color: Yellow
CROSS
CodeInner duct size in mmH W
OPW-16CA-YL 100 160OPW-30CA-YL 100 300
CoversOPW-16CAC-YL - 160OPW-30CAC-YL - 300
Pohled shora
Cover
Čelní Boční
Top view
CoverFront viewSide view
* dostupné šířky naleznete v tabulce níže, všechny rozměry v mm
width*10
0
2 000
100
width*
* for available widths please see table bellow, all dimensions in mmOPW-16CAC-YL
OPW-16MD2M-YL
OPW-16MD2MC-YL
OPW-16CA-YL
Main Duct
Cross
CONTEG, spol. s r.o., Na Vítězné pláni 1719/4, 140 00 Prague 4, Czech Republic
The horizontal elbows allow ducts to be diverted through 45° or 90°. 2 joiners required per elbow. Color: Yellow
HORIZONTAL ELBOW
Code AngleInner duct size in mm
H WOPW-16HA45-YL 45° 100 160OPW-30HA45-YL 45° 100 300OPW-16HA90-YL 90° 100 160OPW-30HA90-YL 90° 100 300
CoversOPW-16HA45C-YL 45° - 160OPW-30HA45C-YL 45° - 300OPW-16HA90C-YL 90° - 160OPW-30HA90C-YL 90° - 300
The Tee is used to 3 way right angled intersection.3 joiners are required per Tee. Color: Yellow
TEE
CodeInner duct size in mm
H W
OPW-16TA-YL 100 160
OPW-30TA-YL 100 300
CoversOPW-16TAC-YL - 160
OPW-30TAC-YL - 300
Top view
CoverFront viewSide view
Top view
Front viewSide view
OPW-16TA-YL
OPW-16TAC-YL
width* width*
300
* for available widths please see table bellow, all dimensions in mm
Cover
OPW-16HA45-YL
OPW-16HA90-YL
OPW-16HA45C-YL
* for available widths please see table bellow, all dimensions in mm
width*width*
100
Tee
Horizontal elbow
45° 90°
OPW-16HA90C-YL
CONTEG, spol. s r.o., Na Vítězné pláni 1719/4, 140 00 Prague 4, Czech Republic
SPILLOVER
CodeInner duct size in mm
H WOPW-10DR-YL * 100 100
Cover OPW-10DRC-YL - 100
The spillover is used to provide a controlled exit from the OptiWay ducting system for cables. OptiWay spillover kit includes 100mm spillover exit, 100mm joiner and 100mm trumpet. Color: Yellow
The vertical inside elbows allow ducts to be diverted through 45° or 90° with an Inside angle (usually in adownward direction). 2 joiners required per elbow. Color: Yellow
Cover
Spillover
Top view
Front viewSide view
100
153
200
288
OPW-10DR-YL
OPW-10DRC-YL
Vertical Inside Elbow
VERTICAL INSIDE ELBOW
Code AngleInner duct size in mm
H WOPW-10IA45-YL 45° 100 100OPW-16IA45-YL 45° 100 160OPW-30IA45-YL 45° 100 300OPW-16IA90-YL 90° 100 160OPW-30IA90-YL 90° 100 300
CoversOPW-16IA45C-YL 45° - 160OPW-30IA45C-YL 45° - 300OPW-16IA90C-YL 90° - 160OPW-30IA90C-YL 90° - 300
* kit includes 100mm spillover exit, joiner and trumpet
Rear view
Front viewSide view
Cover
width*
width*
100
100
OPW-16IA45-YL
OPW-16IA45C-YL
45°
OPW-16IA90-YL
* for available widths please see table bellow, all dimensions in mm
width*
width*100
90°
OPW-16IA90C-YL
ACCESSORIES FOR SPILLOVERCode DescriptionOPW-10JO-YL OptiWay 100 Joiner, 100 x 100mm, yellowOPW-10TA-YL OptiWay 100 Trumpet, 100 x 100mm, yellowOPW-10IA45-YL OptiWay 100mm 45 degree down angle, yellow
OPW-SDMB16 OptiWay Side Drop Mounting Bracket for 160 x 100mm duct size
OPW-SDMB30 OptiWay Side Drop Mounting Bracket for 300 x 100mm duct size
CONTEG, spol. s r.o., Na Vítězné pláni 1719/4, 140 00 Prague 4, Czech Republic
The vertical outside elbows allow ducts to be diverted through 45° or 90° with an Inside angle (usually in an upward direction). 2 joiners required per elbow. Color: Yellow
The Trumpet is used to provide bend-radius control for cables entering or exiting the OptiWay ducting system.1 joiner is required per trumpet. Color: Yellow
TRUMPET
CodeInner duct size in mmH W
OPW-10TP-YL 100 100
OPW-16TP-YL 100 160
OPW-30TP-YL 100 300
Vertical Outside Elbow
VERTICAL OUTSIDE ELBOW
Code AngleInner duct size in mm
H WOPW-16OA45-YL 45° 100 160OPW-30OA45-YL 45° 100 300OPW-16OA90-YL 90° 100 160OPW-30OA90-YL 90° 100 300
CoversOPW-16OA45C-YL 45° - 160OPW-30OA45C-YL 45° - 300OPW-16OA90C-YL 90° - 160OPW-30OA90C-YL 90° - 300
Trumpet
OPW-16OA45C-YL
* for available widths please see table bellow, all dimensions in mm
Top view
Front viewSide view
width*70
100
OPW-16TP-YL
* for available widths please see table bellow, all dimensions in mm
Rear view
Front viewSide view
Cover
width*
100
100
45°
width*
100
90°
OPW-16OA45-YL
OPW-16OA90-YL
OPW-16OA90C-YL
CONTEG, spol. s r.o., Na Vítězné pláni 1719/4, 140 00 Prague 4, Czech Republic
REDUCER
CodeInner duct size in mm
H W1 / W2
OPW-3016RD-YL 100 300 / 160
CoverOPW-3016RDC-YL - 300 / 160
JOINER
CodeInner duct size in mm
H W
OPW-10JO-YL 100 100
OPW-16JO-YL 100 160
OPW-30JO-YL 100 300
The reducer allows sections of 300 x 100mm & 160 x 100mm OptiWay to be joined together. 2 joiners are required per reducer. Color: Yellow
Used to connect two components of OptiWay. The joiner does not require drilling of duct or components. Color: Yellow
Cover
Reducer
Top view
Front viewSide view
160
100
300
OPW-3016RD-YL
OPW-3016RDC-YL
Joiner
Top view
Front viewSide view
width*
100
OPW-16JO-YL
* for available widths please see the table, all dimensions in mm
55
End CapProvides a clean finish to the end of an OptiWay run. Color: Yellow
END CAP
CodeInner duct size in mm
H W
OPW-16EC-YL 100 160
OPW-30EC-YL 100 300
OPW-16EC-YL
Top view
Front viewSide view
100
* for available widths please see the table, all dimensions in mm
width*
298
CONTEG, spol. s r.o., Na Vítězné pláni 1719/4, 140 00 Prague 4, Czech Republic
Basic supporting element. Consists of metal bracket and 2 fixing screws. We recommend using one bracket each 900mm of your ducting system. Please note: brackets do not include threaded rod. Color: Black
THREADED ROD ATTACHMENT BRACKET
CodeSupported duct inner size in mm
H W
OPW-TRB16 100 160
OPW-TRB30 100 300
SPILLOVER SUPPORT BRACKET
CodeSupported duct inner size in mm
H W
OPW-SDMB16 100 160
OPW-SDMB30 100 300
Threaded rod attachment bracket
Top view
Front viewSide view
width*56
* for available widths please see table, all dimensions in mm
48
289
17
Spillover‘s supporting element. Consists of metal bracket and 2 fixing screws. Color: BlackSpillover support bracket
Top view
Front viewSide view
* for available widths please see table bellow, all dimensions in mm
75
width*
Configure the pathway system from OptiWay products in order to meet your requirements. Each product has an original part number so you can order products which you really need. OptiWay products are delivered in carton boxes and we prefer ordering by 5 pieces from each product. Main ducts are delivered by two pieces in carton box, so the order of Main duct should be in even numbers. As soon as you have the part numbers, please contact your distributor of CONTEG products. In order to help you to optimize your design, CONTEG engineering support is available to plan and configure your OptiWay. Please contact us with any technical support requests that you have.
ORDERING AND SHIPPING INFORMATION
124
124