Download - Danh Muc Cac Tieu Chuan Iso
-
8/6/2019 Danh Muc Cac Tieu Chuan Iso
1/89
http://www.findstandards.info
[email protected] | [email protected]
Home | Database & Portal | How to Buy the Standards
ISO Standards
ISO 5925-1:2007 ISO 5925-1:2007 Fire tests - Smoke-control door and shutter assemblies - Part 1: Ambient-and medium-temperature leakage tests
ISO 5930:1979 ISO 5930:1979 Cryolite, natural and artificial, and aluminium fluoride for industrial use --
Determination of phosphorus content -- Reduced molybdophosphate photometric method
ISO 5931:2000 ISO 5931:2000 Carbonaceous materials used in the production of aluminium -- Calcined coke
and calcined carbon products -- Determination of total sulfur by the Eschka method
ISO 5938:1979 ISO 5938:1979 Cryolite, natural and artificial, and aluminium fluoride for industrial use --
Determination of sulphur content -- X-ray fluorescence spectrometric method
ISO 5939:1980 ISO 5939:1980 Carbonaceous materials for the production of aluminium -- Pitch for electrodes
-- Determination of water content -- Azeotropic distillation (Dean and Stark) method
ISO 594 - Conical Fittings Package ISO 594 - Conical Fittings Package ISO 594 - Conical Fittings Package
ISO 5940:1981 ISO 5940:1981 Carbonaceous materials for the production of aluminium -- Pitch for electrodes
-- Determination of softening point by the ring-and-ball method
ISO 5940-2:2007 ISO 5940-2:2007 Carbonaceous materials used in the production of aluminium - Pitch for
electrodes - Part 2: Determination of the softening point (Mettler softening point method)
ISO 5941:1979 ISO 5941:1979 Compressors, pneumatic tools and machines - Preferred pressures
ISO 594-1:1986 ISO 594-1:1986 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other
medical equipment -- Part 1: General requirements
ISO 594-2:1998 ISO 594-2:1998 Conical fittings with 6 % (Luer) taper for syringes, needles and certain other
medical equipment -- Part 2: Lock fittingsISO 5943:2006 ISO 5943:2006 Cheese and processed cheese products - Determination of chloride content -
Potentiometric titration method
ISO 5945:1989 ISO 5945:1989 Rubber - Determination of polyisoprene content
ISO 5948:1994 ISO 5948:1994 Railway rolling stock material - Ultrasonic acceptance testing
ISO 5949:1983 ISO 5949:1983 Tool steels and bearing steels - Micrographic method for assessing the
distribution of carbides using reference photomicrographs
ISO 5950:2008 ISO 5950:2008 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of
http://www.findstandards.info/StandardsPage/94582.htmlhttp://www.findstandards.info/StandardsPage/94581.htmlhttp://www.findstandards.info/StandardsPage/94580.htmlhttp://www.findstandards.info/StandardsPage/94579.htmlhttp://www.findstandards.info/StandardsPage/94578.htmlhttp://www.findstandards.info/StandardsPage/94577.htmlhttp://www.findstandards.info/StandardsPage/94576.htmlhttp://www.findstandards.info/StandardsPage/94575.htmlhttp://www.findstandards.info/StandardsPage/94574.htmlhttp://www.findstandards.info/StandardsPage/94573.htmlhttp://www.findstandards.info/StandardsPage/94572.htmlhttp://www.findstandards.info/StandardsPage/94571.htmlhttp://www.findstandards.info/StandardsPage/94570.htmlhttp://www.findstandards.info/StandardsPage/94569.htmlhttp://www.findstandards.info/StandardsPage/94568.htmlhttp://www.findstandards.info/StandardsPage/94567.htmlhttp://www.findstandards.info/portal/index.asp?typeid=2http://www.findstandards.info/buy%20standards.htmhttp://www.findstandards.info/portal/index.asp?typeid=1http://www.findstandards.info/ -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
2/89
http://www.findstandards.info
[email protected] | [email protected]
commercial and drawing qualities
ISO 595-1:1986 ISO 595-1:1986 Reusable all-glass or metal-and-glass syringes for medical use -- Part 1:
Dimensions
ISO 5951:2008 ISO 5951:2008 Hot-rolled steel sheet of higher yield strength with improved formability
ISO 595-2:1987 ISO 595-2:1987 Reusable all-glass or metal-and-glass syringes for medical use -- Part 2:
Design, performance requirements and testsISO 5952:2005 ISO 5952:2005 Continuously hot-rolled steel sheet of structural quality with improved
atmospheric corrosion resistance
ISO 5954:2007 ISO 5954:2007 Cold-reduced carbon steel sheet according to hardness requirements
ISO 5956:1984 ISO 5956:1984 Copper and copper alloys - Determination of antimony content - Rhodamine B
spectrometric method
ISO 5959:1984 ISO 5959:1984 Copper and copper alloys - Determination of bismuth content -
Diethyldithiocarbamate spectrometric method
ISO 5960:1984 ISO 5960:1984 Copper alloys - Determination of cadmium content - Flame atomic absorption
spectrometric method
ISO 5961:1994 ISO 5961:1994 Water quality - Determination of cadmium by atomic absorption spectrometry
ISO 5963:1985 ISO 5963:1985 Documentation -- Methods for examining documents, determining their subjects,
and selecting indexing terms
ISO 5964:1985 ISO 5964:1985 Documentation -- Guidelines for the establishment and development of
multilingual thesauri
ISO 5967:1981 ISO 5967:1981 Taps and thread cutting - Nomenclature of the main types and terminology
ISO 5968:1981 ISO 5968:1981 Circular screwing dies - Terminology
ISO 5969/Cor1:1991 ISO 5969/Cor1:1991 Corrigendum
ISO 5969:1979 ISO 5969:1979 Ground thread taps for pipe threads G series and Rp series - Tolerances on the
threaded portionISO 5970:1979 ISO 5970:1979 Furniture -- Chairs and tables for educational institutions -- Functional sizes
ISO 5971:1981 ISO 5971:1981 Size designation of clothes -- Pantyhose
ISO 5975:1983 ISO 5975:1983 Chromium ores -- Determination of calcium and magnesium contents -- EDTA
titrimetric method
ISO 5978:1990 ISO 5978:1990 Rubber- or plastics-coated fabrics -- Determination of blocking resistance
ISO 5979:1982 ISO 5979:1982 Rubber or plastics coated fabrics -- Determination of flexibility -- Flat loop
method
http://www.findstandards.info/StandardsPage/94602.htmlhttp://www.findstandards.info/StandardsPage/94601.htmlhttp://www.findstandards.info/StandardsPage/94600.htmlhttp://www.findstandards.info/StandardsPage/94599.htmlhttp://www.findstandards.info/StandardsPage/94598.htmlhttp://www.findstandards.info/StandardsPage/94597.htmlhttp://www.findstandards.info/StandardsPage/94596.htmlhttp://www.findstandards.info/StandardsPage/94595.htmlhttp://www.findstandards.info/StandardsPage/94594.htmlhttp://www.findstandards.info/StandardsPage/94593.htmlhttp://www.findstandards.info/StandardsPage/94592.htmlhttp://www.findstandards.info/StandardsPage/94591.htmlhttp://www.findstandards.info/StandardsPage/94590.htmlhttp://www.findstandards.info/StandardsPage/94589.htmlhttp://www.findstandards.info/StandardsPage/94588.htmlhttp://www.findstandards.info/StandardsPage/94587.htmlhttp://www.findstandards.info/StandardsPage/94586.htmlhttp://www.findstandards.info/StandardsPage/94585.htmlhttp://www.findstandards.info/StandardsPage/94584.htmlhttp://www.findstandards.info/StandardsPage/94583.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
3/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 5981:2007 ISO 5981:2007 Rubber- or plastics-coated fabrics - Determination of resistance to combined
shear flexing and rubbing
ISO 5982:2001 ISO 5982:2001 Mechanical vibration and shock - Range of idealized values to characterize
seated-body biodynamic response under vertical vibration
ISO 5983-1/Cor1:2008 ISO 5983-1/Cor1:2008 Corrigendum
ISO 5983-1:2005 ISO 5983-1:2005 Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method
ISO 5983-2:2009 ISO 5983-2:2009 Animal feeding stuffs - Determination of nitrogen content and calculation of
crude protein content - Part 2: Block digestion and steam distillation method
ISO 5984/Cor1:2005 ISO 5984/Cor1:2005 Animal feeding stuffs - Determination of crude ash - Corrigendum
ISO 5984:2002 ISO 5984:2002 Animal feeding stuffs - Determination of crude ash
ISO 5985/Cor1:2005 ISO 5985/Cor1:2005 Animal feeding stuffs - Determination of ash insoluble in
hydrochloric acid - Corrigendum
ISO 5985:2002 ISO 5985:2002 Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid
ISO 5989:1995 ISO 5989:1995 Photography -- Pre-packaged chemicals for the processing of silver halide based
photographic materials -- Vocabulary
ISO 5990:2000 ISO 5990:2000 Photography -- Processing chemicals -- Specifications for potassium sulfite, 650
g/l solution
ISO 5993:1979 ISO 5993:1979 Sodium hydroxide for industrial use -- Determination of mercury content --
Flameless atomic absorption spectrometric method
ISO 5996:1984 ISO 5996:1984 Cast iron gate valves
ISO 5997:1984 ISO 5997:1984 Chromium ores and concentrates -- Determination of silicon content --
Molecular absorption spectrometric method and gravimetric method
ISO 5999:2007 ISO 5999:2007 Flexible cellular polymeric materials - Polyurethane foam for load-bearing
applications excluding carpet underlay - SpecificationISO 6:1993 ISO 6:1993 Photography -- Black-and-white pictorial still camera negative film/process systems --
Determination of ISO speed
ISO 60:1977 ISO 60:1977 Plastics - Determination of apparent density of material that can be poured from a
specified funnel
ISO 6000:1981 ISO 6000:1981 Round-headed cabbage -- Storage in the open
ISO 6002:1992 ISO 6002:1992 Bolted bonnet steel gate valves
ISO 6003:1984 ISO 6003:1984 Alpine skis -- Determination of mass and polar moment of inertia -- Laboratory
http://www.findstandards.info/StandardsPage/94622.htmlhttp://www.findstandards.info/StandardsPage/94621.htmlhttp://www.findstandards.info/StandardsPage/94620.htmlhttp://www.findstandards.info/StandardsPage/94619.htmlhttp://www.findstandards.info/StandardsPage/94618.htmlhttp://www.findstandards.info/StandardsPage/94617.htmlhttp://www.findstandards.info/StandardsPage/94616.htmlhttp://www.findstandards.info/StandardsPage/94615.htmlhttp://www.findstandards.info/StandardsPage/94614.htmlhttp://www.findstandards.info/StandardsPage/94613.htmlhttp://www.findstandards.info/StandardsPage/94612.htmlhttp://www.findstandards.info/StandardsPage/94611.htmlhttp://www.findstandards.info/StandardsPage/94610.htmlhttp://www.findstandards.info/StandardsPage/94609.htmlhttp://www.findstandards.info/StandardsPage/94608.htmlhttp://www.findstandards.info/StandardsPage/94607.htmlhttp://www.findstandards.info/StandardsPage/94606.htmlhttp://www.findstandards.info/StandardsPage/94605.htmlhttp://www.findstandards.info/StandardsPage/94604.htmlhttp://www.findstandards.info/StandardsPage/94603.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
4/89
http://www.findstandards.info
[email protected] | [email protected]
measurement method
ISO 6004:1991 ISO 6004:1991 Alpine skis -- Ski binding screws -- Requirements
ISO 6005:1991 ISO 6005:1991 Alpine skis -- Ski binding screws -- Test methods
ISO 6009/Cor1:2008 ISO 6009/Cor1:2008 Hypodermic needles for single use - Colour coding for identification
- Corrigendum
ISO 6009:1992 ISO 6009:1992 Hypodermic needles for single use - Colour coding for identificationISO 601:1981 ISO 601:1981 Solid mineral fuels - Determination of arsenic content using the standard silver
diethyldithiocarbamate photometric method of ISO 2590
ISO 6011:2003 ISO 6011:2003 Earth-moving machinery - Visual display of machine operation
ISO 6012:1997 ISO 6012:1997 Earth-moving machinery -- Service instrumentation
ISO 6014:1986 ISO 6014:1986 Earth-moving machinery -- Determination of ground speed
ISO 6015:2006 ISO 6015:2006 Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods
of determining tool forces
ISO 6016:2008 ISO 6016:2008 Earth-moving machinery - Methods of measuring the masses of whole
machines, their equipment and components
ISO 602:1983 ISO 602:1983 Coal -- Determination of mineral matter
ISO 6020-1:2007 ISO 6020-1:2007 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16
MPa (160 bar) series - Part 1: Medium series
ISO 6020-2/Cor1:2008 ISO 6020-2/Cor1:2008 Hydraulic fluid power - Single rod cylinders - Mounting
dimensions 160 bar (16 000 kPa) series - Part 2: Compact series - Corrigendum
ISO 6020-2:2006 ISO 6020-2:2006 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16
MPa (160 bar) series - Part 2: Compact series
ISO 6020-3:1994 ISO 6020-3:1994 Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16
MPa (160 bar) series -- Part 3: Compact series with bores from 250 mm to 500 mm
ISO 6022:2006 ISO 6022:2006 Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa(250 bar) series
ISO 6025:2000 ISO 6025:2000 Cinematography -- Analogue photographic sound test films, 35 mm and 16 mm
-- Specifications
ISO 603-1/Cor1:1999 ISO 603-1/Cor1:1999 Corrigendum
ISO 603-1:1999 ISO 603-1:1999 Bonded abrasive products -- Dimensions -- Part 1: Grinding wheels for
external cylindrical grinding between centres
ISO 603-10/Cor1:1999 ISO 603-10/Cor1:1999 Corrigendum
http://www.findstandards.info/StandardsPage/94642.htmlhttp://www.findstandards.info/StandardsPage/94641.htmlhttp://www.findstandards.info/StandardsPage/94640.htmlhttp://www.findstandards.info/StandardsPage/94639.htmlhttp://www.findstandards.info/StandardsPage/94638.htmlhttp://www.findstandards.info/StandardsPage/94637.htmlhttp://www.findstandards.info/StandardsPage/94636.htmlhttp://www.findstandards.info/StandardsPage/94635.htmlhttp://www.findstandards.info/StandardsPage/94634.htmlhttp://www.findstandards.info/StandardsPage/94633.htmlhttp://www.findstandards.info/StandardsPage/94632.htmlhttp://www.findstandards.info/StandardsPage/94631.htmlhttp://www.findstandards.info/StandardsPage/94630.htmlhttp://www.findstandards.info/StandardsPage/94629.htmlhttp://www.findstandards.info/StandardsPage/94628.htmlhttp://www.findstandards.info/StandardsPage/94627.htmlhttp://www.findstandards.info/StandardsPage/94626.htmlhttp://www.findstandards.info/StandardsPage/94625.htmlhttp://www.findstandards.info/StandardsPage/94624.htmlhttp://www.findstandards.info/StandardsPage/94623.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
5/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 603-10:1999 ISO 603-10:1999 Bonded abrasive products -- Dimensions -- Part 10: Stones for honing and
superfinishings
ISO 603-11/Cor1:1999 ISO 603-11/Cor1:1999 Corrigendum
ISO 603-11:1999 ISO 603-11:1999 Bonded abrasive products -- Dimensions -- Part 11: Hand finishing sticks
ISO 603-12/Cor1:1999 ISO 603-12/Cor1:1999 Corrigendum
ISO 603-12:1999 ISO 603-12:1999 Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling on a straight grinder
ISO 603-13/Cor1:1999 ISO 603-13/Cor1:1999 Corrigendum
ISO 603-13:1999 ISO 603-13:1999 Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for
deburring and fettling on a vertical grinder
ISO 603-14/Cor1:1999 ISO 603-14/Cor1:1999 Corrigendum
ISO 603-14:1999 ISO 603-14:1999 Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for
deburring and fettling/snagging on an angle grinder
ISO 603-15/Cor1:1999 ISO 603-15/Cor1:1999 Corrigendum
ISO 603-15:1999 ISO 603-15:1999 Bonded abrasive products -- Dimensions -- Part 15: Grinding wheels for
cutting-off on stationary or mobile cutting-off machines
ISO 603-16/Cor1:1999 ISO 603-16/Cor1:1999 Corrigendum
ISO 603-16:1999 ISO 603-16:1999 Bonded abrasive produtcs -- Dimensions -- Part 16: Grinding wheels for
cutting-off on hand held power tools
ISO 603-2/Cor1:1999 ISO 603-2/Cor1:1999 Corrigendum
ISO 603-2:1999 ISO 603-2:1999 Bonded abrasive products -- Dimensions -- Part 2: Grinding wheels for
centreless external cylindrical grinding
ISO 603-3/Cor1:1999 ISO 603-3/Cor1:1999 Corrigendum
ISO 6033:1983 ISO 6033:1983 Cinematography -- Projection reel size 7 for 8 mm Type S motion-picture film
-- Dimensions and specificationsISO 603-3:1999 ISO 603-3:1999 Bonded abrasive products -- Dimensions -- Part 3: Grinding wheels for
internal cylindrical grinding
ISO 603-4/Cor1:1999 ISO 603-4/Cor1:1999 Corrigendum
ISO 603-4:1999 ISO 603-4:1999 Bonded abrasive products -- Dimensions -- Part 4: Grinding wheels for
surface grinding/peripheral grinding
ISO 603-5/Cor1:1999 ISO 603-5/Cor1:1999 Corrigendum
ISO 6035:1983 ISO 6035:1983 Cinematography -- Viewing conditions for the evaluation of films and slides for
http://www.findstandards.info/StandardsPage/94664.htmlhttp://www.findstandards.info/StandardsPage/94663.htmlhttp://www.findstandards.info/StandardsPage/94662.htmlhttp://www.findstandards.info/StandardsPage/94661.htmlhttp://www.findstandards.info/StandardsPage/94660.htmlhttp://www.findstandards.info/StandardsPage/94659.htmlhttp://www.findstandards.info/StandardsPage/94658.htmlhttp://www.findstandards.info/StandardsPage/94657.htmlhttp://www.findstandards.info/StandardsPage/94656.htmlhttp://www.findstandards.info/StandardsPage/94655.htmlhttp://www.findstandards.info/StandardsPage/94654.htmlhttp://www.findstandards.info/StandardsPage/94653.htmlhttp://www.findstandards.info/StandardsPage/94652.htmlhttp://www.findstandards.info/StandardsPage/94651.htmlhttp://www.findstandards.info/StandardsPage/94650.htmlhttp://www.findstandards.info/StandardsPage/94649.htmlhttp://www.findstandards.info/StandardsPage/94648.htmlhttp://www.findstandards.info/StandardsPage/94647.htmlhttp://www.findstandards.info/StandardsPage/94646.htmlhttp://www.findstandards.info/StandardsPage/94645.htmlhttp://www.findstandards.info/StandardsPage/94644.htmlhttp://www.findstandards.info/StandardsPage/94643.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
6/89
http://www.findstandards.info
[email protected] | [email protected]
television -- Colours, luminances and dimensions
ISO 603-5:1999 ISO 603-5:1999 Bonded abrasive products -- Dimensions -- Part 5: Grinding wheels for
surface grinding/face grinding
ISO 603-6/Cor1:1999 ISO 603-6/Cor1:1999 Corrigendum
ISO 6036:1996 ISO 6036:1996 Cinematography -- Colour motion-picture prints and slides for television --
Density specificationsISO 603-6:1999 ISO 603-6:1999 Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool
and tool room grinding
ISO 603-7/Cor1:1999 ISO 603-7/Cor1:1999 Corrigendum
ISO 603-7:1999 ISO 603-7:1999 Bonded abrasive products -- Dimensions -- Part 7: Grinding wheels for
manually guided grinding
ISO 603-8/Cor1:1999 ISO 603-8/Cor1:1999 Corrigendum
ISO 6038:1993 ISO 6038:1993 Cinematography -- Splices for use on 70 mm, 65 mm, 35 mm and 16 mm
motion-picture films -- Dimensions and locations
ISO 603-8:1999 ISO 603-8:1999 Bonded abrasive products -- Dimensions -- Part 8: Grinding wheels for
deburring and fettling/snagging
ISO 603-9/Cor1:1999 ISO 603-9/Cor1:1999 Corrigendum
ISO 603-9:1999 ISO 603-9:1999 Bonded abrasive products -- Dimensions -- Part 9: Grinding wheels for
high-pressure grinding
ISO 604:2002 ISO 604:2002 Plastics - Determination of compressive properties
ISO 6042:1998 ISO 6042:1998 Ships and marine technology -- Weathertight single-leaf steel doors
ISO 6043:1985 ISO 6043:1985 Shipbuilding and marine structures -- Eye and fork assemblies under tension
load -- Main dimensions
ISO 6044:1985 ISO 6044:1985 Shipbuilding and marine structures -- Derrick boom heel fittings -- Main
dimensionsISO 6045:1987 ISO 6045:1987 Shipbuilding and marine structures -- Bearings for derrick goosenecks --
Assemblies and components
ISO 605:1991 ISO 605:1991 Pulses -- Determination of impurities, size, foreign odours, insects, and species
and variety -- Test methods
ISO 6050:1987 ISO 6050:1987 Shipbuilding -- Bulbous bow and side thruster symbols
ISO 6053:1979 ISO 6053:1979 Photography -- Shutter cable release tip and socket -- Dimensions
ISO 6054-1:1994 ISO 6054-1:1994 Motorcycle tyres and rims (code-designated series) - Diameter codes 4 to
http://www.findstandards.info/StandardsPage/94684.htmlhttp://www.findstandards.info/StandardsPage/94683.htmlhttp://www.findstandards.info/StandardsPage/94682.htmlhttp://www.findstandards.info/StandardsPage/94681.htmlhttp://www.findstandards.info/StandardsPage/94680.htmlhttp://www.findstandards.info/StandardsPage/94679.htmlhttp://www.findstandards.info/StandardsPage/94678.htmlhttp://www.findstandards.info/StandardsPage/94677.htmlhttp://www.findstandards.info/StandardsPage/94676.htmlhttp://www.findstandards.info/StandardsPage/94675.htmlhttp://www.findstandards.info/StandardsPage/94674.htmlhttp://www.findstandards.info/StandardsPage/94673.htmlhttp://www.findstandards.info/StandardsPage/94672.htmlhttp://www.findstandards.info/StandardsPage/94671.htmlhttp://www.findstandards.info/StandardsPage/94670.htmlhttp://www.findstandards.info/StandardsPage/94669.htmlhttp://www.findstandards.info/StandardsPage/94668.htmlhttp://www.findstandards.info/StandardsPage/94667.htmlhttp://www.findstandards.info/StandardsPage/94666.htmlhttp://www.findstandards.info/StandardsPage/94665.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
7/89
http://www.findstandards.info
[email protected] | [email protected]
12 - Part 1: Tyres
ISO 6054-2:1990 ISO 6054-2:1990 Motorcycle tyres and rims (Code-designated series) - Diameter codes 4 to
12 - Part 2: Rims
ISO 6055:2004 ISO 6055:2004 Industrial trucks - Overhead guards - Specification and testing
ISO 6058:1984 ISO 6058:1984 Water quality - Determination of calcium content - EDTA titrimetric method
ISO 6059:1984 ISO 6059:1984 Water quality - Determination of the sum of calcium and magnesium - EDTAtitrimetric method
ISO 606/Cor1:2006 ISO 606/Cor1:2006 Short-pitch transmission precision roller chains and chain wheels -
Corrigendum
ISO 606:2004 ISO 606:2004 Short-pitch transmission precision roller and bush chains, attachments and
associated chain sprockets
ISO 6060:1989 ISO 6060:1989 Water quality - Determination of the chemical oxygen demand
ISO 6068:1985 ISO 6068:1985 Information processing - Recording characteristics of instrumentation magnetic
tape (including telemetry systems) - Interchange requirements
ISO 607:1980 ISO 607:1980 Surface active agents and detergents -- Methods of sample division
ISO 6070/Cor1:2006 ISO 6070/Cor1:2006 Auxiliary tables for vibration generators - Methods of describing
equipment characteristics - Corrigendum
ISO 6070:1981 ISO 6070:1981 Auxiliary tables for vibration generators - Methods of describing equipment
characteristics
ISO 6072:2002 ISO 6072:2002 Hydraulic fluid power - Compatibility between fluids and standard elastomeric
materials
ISO 6078:1982 ISO 6078:1982 Black tea -- Vocabulary
ISO 6079:1990 ISO 6079:1990 Instant tea in solid form -- Specification
ISO 609/COR1:1996 ISO 609/COR1:1996 Technical Corrigendum 1
ISO 609:1996 ISO 609:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperaturecombustion method
ISO 6091:1980 ISO 6091:1980 Dried milk -- Determination of titratable acidity (Reference method)
ISO 6092:1980 ISO 6092:1980 Dried milk -- Determination of titratable acidity (Routine method)
ISO 6093:1985 ISO 6093:1985 Information processing - Representation of numerical values in character strings
for information interchange
ISO 6098:1984 ISO 6098:1984 Information processing - Self-loading cartridges for 12,7 mm (0.5 in) wide
magnetic tape
http://www.findstandards.info/StandardsPage/94704.htmlhttp://www.findstandards.info/StandardsPage/94703.htmlhttp://www.findstandards.info/StandardsPage/94702.htmlhttp://www.findstandards.info/StandardsPage/94701.htmlhttp://www.findstandards.info/StandardsPage/94700.htmlhttp://www.findstandards.info/StandardsPage/94699.htmlhttp://www.findstandards.info/StandardsPage/94698.htmlhttp://www.findstandards.info/StandardsPage/94697.htmlhttp://www.findstandards.info/StandardsPage/94696.htmlhttp://www.findstandards.info/StandardsPage/94695.htmlhttp://www.findstandards.info/StandardsPage/94694.htmlhttp://www.findstandards.info/StandardsPage/94693.htmlhttp://www.findstandards.info/StandardsPage/94692.htmlhttp://www.findstandards.info/StandardsPage/94691.htmlhttp://www.findstandards.info/StandardsPage/94690.htmlhttp://www.findstandards.info/StandardsPage/94689.htmlhttp://www.findstandards.info/StandardsPage/94688.htmlhttp://www.findstandards.info/StandardsPage/94687.htmlhttp://www.findstandards.info/StandardsPage/94686.htmlhttp://www.findstandards.info/StandardsPage/94685.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
8/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 6099:2009 ISO 6099:2009 Fluid power systems and components - Cylinders - Identification code for
mounting dimensions and mounting types
ISO 61:1976 ISO 61:1976 Plastics - Determination of apparent density of moulding material that cannot be
poured from a specified funnel
ISO 610:1990 ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughs
ISO 6101-1:1991 ISO 6101-1:1991 Rubber - Determination of metal content by atomic absorption spectrometry- Part 1: Determination of zinc content
ISO 6101-2:1997 ISO 6101-2:1997 Rubber - Determination of metal content by atomic absorption spectrometry
- Part 2: Determination of lead content
ISO 6101-3:1997 ISO 6101-3:1997 Rubber - Determination of metal content by atomic absorption spectrometry
- Part 3: Determination of copper content
ISO 6101-4:1997 ISO 6101-4:1997 Rubber - Determination of metal content by atomic absorption spectrometry
- Part 4: Determination of manganese content
ISO 6101-5:2006 ISO 6101-5:2006 Rubber - Determination of metal content by atomic absorption spectrometry
- Part 5: Determination of iron content
ISO 6103:2005 ISO 6103:2005 Bonded abrasive products - Permissible unbalances of grinding wheels as
delivered - Static testing
ISO 6104:2005 ISO 6104:2005 Superabrasive products - Rotating grinding tools with diamond or cubic boron
nitride - General survey, designation and multilingual nomenclature
ISO 6106:2005 ISO 6106:2005 Abrasive products - Checking the grit size of superabrasives
ISO 6107-1:2004 ISO 6107-1:2004 Water quality - Vocabulary
ISO 6107-2:2006 ISO 6107-2:2006 Water quality - Vocabulary
ISO 6107-3/Amd1:2001 ISO 6107-3/Amd1:2001 Water quality - Vocabulary - Amendment 1
ISO 6107-3:1993 ISO 6107-3:1993 Water quality - Vocabulary - Part 3
ISO 6107-4:1993 ISO 6107-4:1993 Water quality - Vocabulary - Part 4ISO 6107-5:2004 ISO 6107-5:2004 Water quality - Vocabulary
ISO 6107-6:2004 ISO 6107-6:2004 Water quality - Vocabulary
ISO 6107-7:2006 ISO 6107-7:2006 Water quality - Vocabulary
ISO 6107-8/Amd1:2001 ISO 6107-8/Amd1:2001 Water quality - Vocabulary - Amendment 1
ISO 6107-8:1993 ISO 6107-8:1993 Water quality - Vocabulary - Part 8
ISO 6107-9:1997 ISO 6107-9:1997 Water quality - Vocabulary - Part 9: Alphabetical list and subject index
ISO 6108:1978 ISO 6108:1978 Double equal angle cutters with plain bore and key drive
http://www.findstandards.info/StandardsPage/94727.htmlhttp://www.findstandards.info/StandardsPage/94726.htmlhttp://www.findstandards.info/StandardsPage/94725.htmlhttp://www.findstandards.info/StandardsPage/94724.htmlhttp://www.findstandards.info/StandardsPage/94723.htmlhttp://www.findstandards.info/StandardsPage/94722.htmlhttp://www.findstandards.info/StandardsPage/94721.htmlhttp://www.findstandards.info/StandardsPage/94720.htmlhttp://www.findstandards.info/StandardsPage/94719.htmlhttp://www.findstandards.info/StandardsPage/94718.htmlhttp://www.findstandards.info/StandardsPage/94717.htmlhttp://www.findstandards.info/StandardsPage/94716.htmlhttp://www.findstandards.info/StandardsPage/94715.htmlhttp://www.findstandards.info/StandardsPage/94714.htmlhttp://www.findstandards.info/StandardsPage/94713.htmlhttp://www.findstandards.info/StandardsPage/94712.htmlhttp://www.findstandards.info/StandardsPage/94711.htmlhttp://www.findstandards.info/StandardsPage/94710.htmlhttp://www.findstandards.info/StandardsPage/94709.htmlhttp://www.findstandards.info/StandardsPage/94708.htmlhttp://www.findstandards.info/StandardsPage/94707.htmlhttp://www.findstandards.info/StandardsPage/94706.htmlhttp://www.findstandards.info/StandardsPage/94705.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
9/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 611:2003 ISO 611:2003 Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary
ISO 6115:1988 ISO 6115:1988 Shipbuilding -- Trawl winches
ISO 6117:2005 ISO 6117:2005 Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel
cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
ISO 6118:2006 ISO 6118:2006 Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking
systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)ISO 6119:2006 ISO 6119:2006 Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a
non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
ISO 612:1978 ISO 612:1978 Road vehicles - Dimensions of motor vehicles and towed vehicles - Terms and
definitions
ISO 6120:1995 ISO 6120:1995 Road vehicles - Brake hose assemblies for hydraulic braking systems used with
petroleum-base brake fluid
ISO 6121:1988 ISO 6121:1988 Surface active agents -- Technical alkane sulfonates -- Determination of alkane
monosulfonates content by direct two-phase titration
ISO 6122:1978 ISO 6122:1978 Surface active agents -- Technical alkane sulphonates -- Determination of total
alkane sulphonates content
ISO 6123-1:1982 ISO 6123-1:1982 Rubber or plastics covered rollers - Specifications - Part 1 : Requirements
for hardness
ISO 6123-2:1988 ISO 6123-2:1988 Rubber- or plastics-covered rollers - Specifications - Part 2 : Surface
characteristics
ISO 6123-3:1985 ISO 6123-3:1985 Rubber- or plastics-covered rollers - Specifications - Part 3: Dimensional
tolerances
ISO 6127:1981 ISO 6127:1981 Chromium ores -- Determination of phosphorus content -- Reduced
molybdophosphate photometric method
ISO 6129:1981 ISO 6129:1981 Chromium ores -- Determination of hygroscopic moisture content in analyticalsamples -- Gravimetric method
ISO 6130:1985 ISO 6130:1985 Chromium ores -- Determination of total iron content -- Titrimetric method after
reduction
ISO 6133:1998 ISO 6133:1998 Rubber and plastics - Analysis of multi-peak traces obtained in determinations
of tear strength and adhesion strength
ISO 6134:2005 ISO 6134:2005 Rubber hoses and hose assemblies for saturated steam - Specification
ISO 6138:1991 ISO 6138:1991 Aluminium ores -- Experimental determination of the heterogeneity of
http://www.findstandards.info/StandardsPage/94745.htmlhttp://www.findstandards.info/StandardsPage/94744.htmlhttp://www.findstandards.info/StandardsPage/94743.htmlhttp://www.findstandards.info/StandardsPage/94742.htmlhttp://www.findstandards.info/StandardsPage/94741.htmlhttp://www.findstandards.info/StandardsPage/94740.htmlhttp://www.findstandards.info/StandardsPage/94739.htmlhttp://www.findstandards.info/StandardsPage/94738.htmlhttp://www.findstandards.info/StandardsPage/94737.htmlhttp://www.findstandards.info/StandardsPage/94736.htmlhttp://www.findstandards.info/StandardsPage/94735.htmlhttp://www.findstandards.info/StandardsPage/94734.htmlhttp://www.findstandards.info/StandardsPage/94733.htmlhttp://www.findstandards.info/StandardsPage/94732.htmlhttp://www.findstandards.info/StandardsPage/94731.htmlhttp://www.findstandards.info/StandardsPage/94730.htmlhttp://www.findstandards.info/StandardsPage/94729.htmlhttp://www.findstandards.info/StandardsPage/94728.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
10/89
http://www.findstandards.info
[email protected] | [email protected]
constitution
ISO 6139:1993 ISO 6139:1993 Aluminium ores -- Experimental determination of the heterogeneity of
distribution of a lot
ISO 614:1989 ISO 614:1989 Shipbuilding and marine structures -- Toughened safety glass panes for rectangular
windows and side scuttles -- Punch method of non-destructive strength testing
ISO 6140:1991 ISO 6140:1991 Aluminium ores -- Preparation of samplesISO 6141:2000 ISO 6141:2000 Gas analysis -- Requirements for certificates for calibration gases and gas
mixtures
ISO 6142/Amd1:2009 ISO 6142/Amd1:2009 Gas analysis - Preparation of calibration gas mixtures - Weighing
methods - Amendment 1: Liquid introduction
ISO 6142:2001 ISO 6142:2001 Gas analysis -- Preparation of calibration gas mixtures -- Gravimetric method
ISO 6143:2001 ISO 6143:2001 Gas analysis -- Comparison methods for determining and checking the
composition of calibration gas mixtures
ISO 6144:2003 ISO 6144:2003 Gas analysis - Preparation of calibration gas mixtures - Static volumetric
method
ISO 6145-1:2003 ISO 6145-1:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic
volumetric methods - Part 1: Methods of calibration
ISO 6145-10:2002 ISO 6145-10:2002 Gas analysis - Preparation of calibration gas mixtures using dynamic
volumetric methods - Part 10: Permeation method
ISO 6145-11:2005 ISO 6145-11:2005 Gas analysis - Preparation of calibration gas mixtures using dynamic
volumetric methods - Part 11: Electrochemical generation
ISO 6145-2:2001 ISO 6145-2:2001 Gas analysis -- Preparation of calibration gas mixtures using dynamic
volumetric methods -- Part 2: Volumetric pumps
ISO 6145-4:2004 ISO 6145-4:2004 Gas analysis - Preparation of calibration gas mixtures using dynamic
volumetric methods - Part 4: Continuous syringe injection methodISO 6145-5:2001 ISO 6145-5:2001 Gas analysis -- Preparation of calibration gas mixtures using dynamic
volumetric methods -- Part 5: Capillary calibration devices
ISO 6145-6:2003 ISO 6145-6:2003 Gas analysis - Preparation of calibration gas mixtures using dynamic
volumetric methods - Part 6: Critical orifices
ISO 6145-7:2009 ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic
volumetric methods - Part 7: Thermal mass-flow controllers
ISO 6145-8:2005 ISO 6145-8:2005 Gas analysis - Preparation of calibration gas mixtures using dynamic
http://www.findstandards.info/StandardsPage/94762.htmlhttp://www.findstandards.info/StandardsPage/94761.htmlhttp://www.findstandards.info/StandardsPage/94760.htmlhttp://www.findstandards.info/StandardsPage/94759.htmlhttp://www.findstandards.info/StandardsPage/94758.htmlhttp://www.findstandards.info/StandardsPage/94757.htmlhttp://www.findstandards.info/StandardsPage/94756.htmlhttp://www.findstandards.info/StandardsPage/94755.htmlhttp://www.findstandards.info/StandardsPage/94754.htmlhttp://www.findstandards.info/StandardsPage/94753.htmlhttp://www.findstandards.info/StandardsPage/94752.htmlhttp://www.findstandards.info/StandardsPage/94751.htmlhttp://www.findstandards.info/StandardsPage/94750.htmlhttp://www.findstandards.info/StandardsPage/94749.htmlhttp://www.findstandards.info/StandardsPage/94748.htmlhttp://www.findstandards.info/StandardsPage/94747.htmlhttp://www.findstandards.info/StandardsPage/94746.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
11/89
http://www.findstandards.info
[email protected] | [email protected]
volumetric methods - Part 8: Diffusion method
ISO 6145-9/Cor1:2002 ISO 6145-9/Cor1:2002 Gas analysis - Preparation of calibration gas mixtures using
dynamic volumetric methods - Part 9: Saturation method - Corrigendum
ISO 6145-9:2001 ISO 6145-9:2001 Gas analysis -- Preparation of calibration gas mixtures using dynamic
volumetric methods -- Part 9: Saturation method
ISO 6148:2001 ISO 6148:2001 Photography -- Micrographic films, spools and cores -- DimensionsISO 6149-1:2006 ISO 6149-1:2006 Connections for hydraulic fluid power and general use - Ports and stud ends
with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal
ISO 6149-2:2006 ISO 6149-2:2006 Connections for hydraulic fluid power and general use - Ports and stud ends
with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for
heavy-duty (S
ISO 6149-3:2006 ISO 6149-3:2006 Connections for hydraulic fluid power and general use - Ports and stud ends
with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for
light-duty (L
ISO 6149-4:2006 ISO 6149-4:2006 Connections for fluid power and general use - Ports and stud ends with ISO
261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external
hex and intern
ISO 6150:1988 ISO 6150:1988 Pneumatic fluid power - Cylindrical quick-action couplings for maximum
working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) - Plug connecting dimensions,
specifications, applic
ISO 6152:1982 ISO 6152:1982 Thermometers for use with alcoholometers and alcohol hydrometers
ISO 6153:1989 ISO 6153:1989 Chromium ores -- Increment sampling
ISO 6154:1989 ISO 6154:1989 Chromium ores -- Preparation of samples
ISO 6155:1998 ISO 6155:1998 Machine tools - Test conditions for horizontal spindle turret and single spindle
automatic lathes - Testing of the accuracyISO 6157-1:1988 ISO 6157-1:1988 Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for
general requirements
ISO 6157-2:1995 ISO 6157-2:1995 Fasteners - Surface discontinuities - Part 2: Nuts
ISO 6157-3:1988 ISO 6157-3:1988 Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for
special requirements
ISO 6158:2004 ISO 6158:2004 Metallic coatings - Electrodeposited coatings of chromium for engineering
purposes
http://www.findstandards.info/StandardsPage/94778.htmlhttp://www.findstandards.info/StandardsPage/94777.htmlhttp://www.findstandards.info/StandardsPage/94776.htmlhttp://www.findstandards.info/StandardsPage/94775.htmlhttp://www.findstandards.info/StandardsPage/94774.htmlhttp://www.findstandards.info/StandardsPage/94773.htmlhttp://www.findstandards.info/StandardsPage/94772.htmlhttp://www.findstandards.info/StandardsPage/94771.htmlhttp://www.findstandards.info/StandardsPage/94770.htmlhttp://www.findstandards.info/StandardsPage/94769.htmlhttp://www.findstandards.info/StandardsPage/94768.htmlhttp://www.findstandards.info/StandardsPage/94767.htmlhttp://www.findstandards.info/StandardsPage/94766.htmlhttp://www.findstandards.info/StandardsPage/94765.htmlhttp://www.findstandards.info/StandardsPage/94764.htmlhttp://www.findstandards.info/StandardsPage/94763.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
12/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 616:1995 ISO 616:1995 Coke - Determination of shatter indices
ISO 6160:1979 ISO 6160:1979 Programming languages - PL/I (Endorsement of ANSI standard X3.53-l976)
ISO 6161:1981 ISO 6161:1981 Personal eye-protectors - Filters and eye-protectors against laser radiation
ISO 6162-1/Cor1:2004 ISO 6162-1/Cor1:2004 Corrigendum
ISO 6162-1:2002 ISO 6162-1:2002 Hydraulic fluid power - Flange connectors with split or one-piece flange
clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa(350 bar), DN 1
ISO 6162-2:2002 ISO 6162-2:2002 Hydraulic fluid power - Flange connectors with split or one-piece flange
clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40
MPa (400 bar), DN 1
ISO 6164:1994 ISO 6164:1994 Hydraulic fluid power - Four-screw, one-piece square-flange connections for
use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
ISO 6165:2006 ISO 6165:2006 Earth-moving machinery - Basic types - Identification and terms and definitions
ISO 6166:2001 ISO 6166:2001 Securities and related financial instruments -- International securities
identification numbering system (ISIN)
ISO 6170:1999 ISO 6170:1999 Spinning machinery -- Condenser rubbers for cards
ISO 6173:1982 ISO 6173:1982 Open-end spinning machines -- Vocabulary
ISO 6176:1994 ISO 6176:1994 Textile machinery -- Warp sizing machines -- Maximum usable width
ISO 6177:1986 ISO 6177:1986 Textile machinery -- Cloth rollers -- Terminology and main dimensions
ISO 6178:1983 ISO 6178:1983 Centrifuges -- Construction and safety rules -- Method for the calculation of the
tangential stress in the shell of a cylindrical centrifuge rotor
ISO 6179:1998 ISO 6179:1998 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics -
Determination of transmission rate of volatile liquids (gravimetric technique) (publi en anglais seulement)
ISO 6182-1:2004 ISO 6182-1:2004 Fire protection - Automatic sprinkler systems - Part 1: Requirements and
test methods for sprinklersISO 6182-10:2006 ISO 6182-10:2006 Fire protection - Automatic sprinkler systems - Part 10: Requirements
and test methods for domestic sprinklers
ISO 6182-11:2003 ISO 6182-11:2003 Fire protection - Automatic sprinkler systems - Part 11: Requirements and
test methods for pipe hangers
ISO 6182-2:2005 ISO 6182-2:2005 Fire protection - Automatic sprinkler systems - Part 2: Requirements and
test methods for wet alarm valves, retard chambers and water motor alarms
ISO 6182-3:2005 ISO 6182-3:2005 Fire protection - Automatic sprinkler systems - Part 3: Requirements and
http://www.findstandards.info/StandardsPage/94798.htmlhttp://www.findstandards.info/StandardsPage/94797.htmlhttp://www.findstandards.info/StandardsPage/94796.htmlhttp://www.findstandards.info/StandardsPage/94795.htmlhttp://www.findstandards.info/StandardsPage/94794.htmlhttp://www.findstandards.info/StandardsPage/94793.htmlhttp://www.findstandards.info/StandardsPage/94792.htmlhttp://www.findstandards.info/StandardsPage/94791.htmlhttp://www.findstandards.info/StandardsPage/94790.htmlhttp://www.findstandards.info/StandardsPage/94789.htmlhttp://www.findstandards.info/StandardsPage/94788.htmlhttp://www.findstandards.info/StandardsPage/94787.htmlhttp://www.findstandards.info/StandardsPage/94786.htmlhttp://www.findstandards.info/StandardsPage/94785.htmlhttp://www.findstandards.info/StandardsPage/94784.htmlhttp://www.findstandards.info/StandardsPage/94783.htmlhttp://www.findstandards.info/StandardsPage/94782.htmlhttp://www.findstandards.info/StandardsPage/94781.htmlhttp://www.findstandards.info/StandardsPage/94780.htmlhttp://www.findstandards.info/StandardsPage/94779.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
13/89
-
8/6/2019 Danh Muc Cac Tieu Chuan Iso
14/89
http://www.findstandards.info
[email protected] | [email protected]
conservation purposes
ISO 619:1981 ISO 619:1981 Manganese ores -- Determination of chromium content -- Diphenylcarbazide
photometric method and silver persulphate titrimetric method
ISO 6194-1:2007 ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part
1: Nominal dimensions and tolerances
ISO 6194-2:2009 ISO 6194-2:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part2: Vocabulary
ISO 6194-3:1988 ISO 6194-3:1988 Rotary shaft lip type seals - Part 3 : Storage, handling and installation
ISO 6194-4:2009 ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part
4: Performance test procedures
ISO 6194-5:2008 ISO 6194-5:2008 Rotary-shaft lip-type seals incorporating elastomeric sealing elements - Part
5: Identification of visual imperfections
ISO 6195:2002 ISO 6195:2002 Fluid power systems and components - Cylinder-rod wiper-ring housings in
reciprocating applications - Dimensions and tolerances
ISO 6196-1:1993 ISO 6196-1:1993 Micrographics -- Vocabulary -- Part 01: General terms
ISO 6196-10/Cor1:2004 ISO 6196-10/Cor1:2004 Micrographics - Vocabulary - Part 10: Index - Corrigendum
ISO 6196-10:1999 ISO 6196-10:1999 Micrographics -- Vocabulary -- Part 10: Index
ISO 6196-2:1993 ISO 6196-2:1993 Micrographics -- Vocabulary -- Part 02: Image positions and methods of
recording
ISO 6196-3:1997 ISO 6196-3:1997 Micrographics -- Vocabulary -- Part 03: Film processing
ISO 6196-4:1998 ISO 6196-4:1998 Micrographics -- Vocabulary -- Part 4: Materials and packaging
ISO 6196-5:1987 ISO 6196-5:1987 Micrographics -- Vocabulary -- Part 05 : Quality of images, legibility,
inspection
ISO 6196-6:1992 ISO 6196-6:1992 Micrographics -- Vocabulary -- Part 06: Equipment
ISO 6196-7:1992 ISO 6196-7:1992 Micrographics -- Vocabulary -- Part 07: Computer micrographicsISO 6196-8:1998 ISO 6196-8:1998 Micrographics -- Vocabulary -- Part 8: Use
ISO 6198:1993 ISO 6198:1993 Micrographics -- Readers for transparent microforms -- Performance
characteristics
ISO 6199:2005 ISO 6199:2005 Micrographics - Microfilming of documents on 16 mm and 35 mm
silver-gelatin type microfilm - Operating procedures
ISO 62:2008 ISO 62:2008 Plastics - Determination of water absorption
ISO 6200:1999 ISO 6200:1999 Micrographics -- First generation silver-gelatin microforms of source
http://www.findstandards.info/StandardsPage/94836.htmlhttp://www.findstandards.info/StandardsPage/94835.htmlhttp://www.findstandards.info/StandardsPage/94834.htmlhttp://www.findstandards.info/StandardsPage/94833.htmlhttp://www.findstandards.info/StandardsPage/94832.htmlhttp://www.findstandards.info/StandardsPage/94831.htmlhttp://www.findstandards.info/StandardsPage/94830.htmlhttp://www.findstandards.info/StandardsPage/94829.htmlhttp://www.findstandards.info/StandardsPage/94828.htmlhttp://www.findstandards.info/StandardsPage/94827.htmlhttp://www.findstandards.info/StandardsPage/94826.htmlhttp://www.findstandards.info/StandardsPage/94825.htmlhttp://www.findstandards.info/StandardsPage/94824.htmlhttp://www.findstandards.info/StandardsPage/94823.htmlhttp://www.findstandards.info/StandardsPage/94822.htmlhttp://www.findstandards.info/StandardsPage/94821.htmlhttp://www.findstandards.info/StandardsPage/94820.htmlhttp://www.findstandards.info/StandardsPage/94819.htmlhttp://www.findstandards.info/StandardsPage/94818.htmlhttp://www.findstandards.info/StandardsPage/94817.htmlhttp://www.findstandards.info/StandardsPage/94816.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
15/89
http://www.findstandards.info
[email protected] | [email protected]
documents -- Density specifications and method of measurement
ISO 6205:1988 ISO 6205:1988 Inland navigation vessels -- Customs sealing systems -- Basic technical
requirements
ISO 6206:1979 ISO 6206:1979 Chemical products for industrial use -- Sampling -- Vocabulary
ISO 6207:1992 ISO 6207:1992 Seamless nickel and nickel alloy tube
ISO 6208:1992 ISO 6208:1992 Nickel and nickel alloy plate, sheet and stripISO 6209:2009 ISO 6209:2009 Rubber compounding ingredients - Carbon black - Determination of
solvent-extractable material
ISO 621:1981 ISO 621:1981 Manganese ores -- Determination of metallic iron content (metallic iron content
not exceeding 2 %) -- Sulphosalicylic acid photometric method
ISO 6210-1:1991 ISO 6210-1:1991 Cylinders for robot resistance welding guns - Part 1: General requirements
ISO 6216:1980 ISO 6216:1980 Shipbuilding -- Inland navigation -- Pilot craft -- Classification and basic
requirements
ISO 6217:1982 ISO 6217:1982 Shipbuilding -- Inland navigation -- Pilot craft -- Identification painting and
inscriptions
ISO 6218:2005 ISO 6218:2005 Inland navigation vessels - Manually operated coupling devices for push tows -
Safety requirements and main dimensions
ISO 6219:1983 ISO 6219:1983 Shipbuilding -- Inland vessels -- Windlasses and anchor capstans
ISO 622:1981 ISO 622:1981 Solid mineral fuels - Determination of phorphorus content - Reduced
molybdophosphate photometric method
ISO 6222:1999 ISO 6222:1999 Water quality -- Enumeration of culturable micro- organisms -- Colony count by
inoculation in a nutrient agar culture medium
ISO 6224:2005 ISO 6224:2005 Thermoplastics hoses, textile-reinforced, for general-purpose water applications
- Specification
ISO 6225-1:2006 ISO 6225-1:2006 Rubber, raw, natural - Determination of castor oil content - Part 1:Determination of castor oil glyceride content by thin-layer chromatography
ISO 6225-2:1990 ISO 6225-2:1990 Rubber, raw, natural - Determination of castor oil content - Part 2:
Determination of total ricinoleic acid content by gas chromatography
ISO 6227:1982 ISO 6227:1982 Chemical products for industrial use -- General method for determination of
chloride ions -- Potentiometric method
ISO 6228:1980 ISO 6228:1980 Chemical products for industrial use -- General method for determination of
traces of sulphur compounds, as sulphate, by reduction and titrimetry
http://www.findstandards.info/StandardsPage/94854.htmlhttp://www.findstandards.info/StandardsPage/94853.htmlhttp://www.findstandards.info/StandardsPage/94852.htmlhttp://www.findstandards.info/StandardsPage/94851.htmlhttp://www.findstandards.info/StandardsPage/94850.htmlhttp://www.findstandards.info/StandardsPage/94849.htmlhttp://www.findstandards.info/StandardsPage/94848.htmlhttp://www.findstandards.info/StandardsPage/94847.htmlhttp://www.findstandards.info/StandardsPage/94846.htmlhttp://www.findstandards.info/StandardsPage/94845.htmlhttp://www.findstandards.info/StandardsPage/94844.htmlhttp://www.findstandards.info/StandardsPage/94843.htmlhttp://www.findstandards.info/StandardsPage/94842.htmlhttp://www.findstandards.info/StandardsPage/94841.htmlhttp://www.findstandards.info/StandardsPage/94840.htmlhttp://www.findstandards.info/StandardsPage/94839.htmlhttp://www.findstandards.info/StandardsPage/94838.htmlhttp://www.findstandards.info/StandardsPage/94837.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
16/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 6230:1989 ISO 6230:1989 Manganese ores -- Determination of size distribution by sieving
ISO 6233:1983 ISO 6233:1983 Manganese ores and concentrates -- Determination of calcium and magnesium
contents -- EDTA titrimetric method
ISO 6235:1995 ISO 6235:1995 Rubber, raw - Determination of block polystyrene content - Ozonolysis method
ISO 6237:2003 ISO 6237:2003 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by
tensile loadingISO 6238:2001 ISO 6238:2001 Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength
by compressive loading
ISO 6240:1980 ISO 6240:1980 Performance standards in building -- Contents and presentation
ISO 6241:1984 ISO 6241:1984 Performance standards in building -- Principles for their preparation and factors
to be considered
ISO 6242-1:1992 ISO 6242-1:1992 Building construction -- Expression of users requirements -- Part 1:
Thermal requirements'
ISO 6242-2:1992 ISO 6242-2:1992 Building construction -- Expression of users requirements -- Part 2: Air
purity requirements'
ISO 6242-3:1992 ISO 6242-3:1992 Building construction -- Expression of users requirements -- Part 3:
Acoustical requirements'
ISO 6243:1997 ISO 6243:1997 Climatic data for building design -- Proposed system of symbols
ISO 6244:1982 ISO 6244:1982 Petroleum waxes and petrolatums -- Determination of drop melting point
ISO 6245:2001 ISO 6245:2001 Petroleum products - Determination of ash
ISO 6246/Cor1:1998 ISO 6246/Cor1:1998 Corrigendum
ISO 6246:1995 ISO 6246:1995 Petroleum products - Gum content of light and middle distillate fuels - Jet
evaporation method
ISO 6247/Cor1:1999 ISO 6247/Cor1:1999 Corrigendum
ISO 6247:1998 ISO 6247:1998 Petroleum products -- Determination of foaming characteristics of lubricatingoils
ISO 6249:1999 ISO 6249:1999 Petroleum products -- Determination of thermal oxidation stability of gas
turbine fuels -- JFTOT method
ISO 625/COR1:1996 ISO 625/COR1:1996 Technical Corrigendum 1
ISO 625:1996 ISO 625:1996 Solid mineral fuels - Determination of carbon and hydrogen - Liebig method
ISO 6250:1997 ISO 6250:1997 Petroleum products - Determination of the water reaction of aviation fuels
ISO 6251:1996 ISO 6251:1996 Liquefied petroleum gases - Corrosiveness to copper - Copper strip test
http://www.findstandards.info/StandardsPage/94876.htmlhttp://www.findstandards.info/StandardsPage/94875.htmlhttp://www.findstandards.info/StandardsPage/94874.htmlhttp://www.findstandards.info/StandardsPage/94873.htmlhttp://www.findstandards.info/StandardsPage/94872.htmlhttp://www.findstandards.info/StandardsPage/94871.htmlhttp://www.findstandards.info/StandardsPage/94870.htmlhttp://www.findstandards.info/StandardsPage/94869.htmlhttp://www.findstandards.info/StandardsPage/94868.htmlhttp://www.findstandards.info/StandardsPage/94867.htmlhttp://www.findstandards.info/StandardsPage/94866.htmlhttp://www.findstandards.info/StandardsPage/94865.htmlhttp://www.findstandards.info/StandardsPage/94864.htmlhttp://www.findstandards.info/StandardsPage/94863.htmlhttp://www.findstandards.info/StandardsPage/94862.htmlhttp://www.findstandards.info/StandardsPage/94861.htmlhttp://www.findstandards.info/StandardsPage/94860.htmlhttp://www.findstandards.info/StandardsPage/94859.htmlhttp://www.findstandards.info/StandardsPage/94858.htmlhttp://www.findstandards.info/StandardsPage/94857.htmlhttp://www.findstandards.info/StandardsPage/94856.htmlhttp://www.findstandards.info/StandardsPage/94855.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
17/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 6255:1997 ISO 6255:1997 Passenger cars - Rear-window washing and wiping systems - Test methods
ISO 6257:2002 ISO 6257:2002 Carbonaceous materials used in the production of aluminium -- Pitch for
electrodes -- Sampling (available in English only)
ISO 6258:1985 ISO 6258:1985 Nuclear power plants -- Design against seismic hazards
ISO 6259-1:1997 ISO 6259-1:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 1:
General test methodISO 6259-2:1997 ISO 6259-2:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes
made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact
poly(vinyl chl
ISO 6259-3:1997 ISO 6259-3:1997 Thermoplastics pipes -- Determination of tensile properties -- Part 3:
Polyolefin pipes
ISO 6261:1995 ISO 6261:1995 Boring bars (tool holders with cylindrical shank) for indexable inserts -
Designation
ISO 6262-1:1982 ISO 6262-1:1982 End mills with indexable inserts - Part 1 : End mills with flatted parallel
shank
ISO 6262-2:1982 ISO 6262-2:1982 End mills with indexable inserts - Part 2 : End mills with Morse taper shank
ISO 6263:1997 ISO 6263:1997 Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
ISO 6264:1998 ISO 6264:1998 Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
ISO 6265:1992 ISO 6265:1992 Alpine skis -- Determination of deformation load and breaking load
ISO 6266:1980 ISO 6266:1980 Alpine skis -- Determination of fatigue indexes -- Cyclic loading test
ISO 6267:1980 ISO 6267:1980 Alpine skis -- Measurement of bending vibrations
ISO 6270-1:1998 ISO 6270-1:1998 Paints and varnishes - Determination of resistance to humidity - Part 1:
Continuous condensation
ISO 6270-2:2005 ISO 6270-2:2005 Paints and varnishes - Determination of resistance to humidity - Part 2:
Procedure for exposing test specimens in condensation-water atmospheresISO 6271-1:2004 ISO 6271-1:2004 Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1:
Visual method
ISO 6271-2:2004 ISO 6271-2:2004 Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2:
Spectrophotometric method
ISO 6272-1:2002 ISO 6272-1:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1:
Falling-weight test, large-area indenter
ISO 6272-2:2002 ISO 6272-2:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2:
http://www.findstandards.info/StandardsPage/94896.htmlhttp://www.findstandards.info/StandardsPage/94895.htmlhttp://www.findstandards.info/StandardsPage/94894.htmlhttp://www.findstandards.info/StandardsPage/94893.htmlhttp://www.findstandards.info/StandardsPage/94892.htmlhttp://www.findstandards.info/StandardsPage/94891.htmlhttp://www.findstandards.info/StandardsPage/94890.htmlhttp://www.findstandards.info/StandardsPage/94889.htmlhttp://www.findstandards.info/StandardsPage/94888.htmlhttp://www.findstandards.info/StandardsPage/94887.htmlhttp://www.findstandards.info/StandardsPage/94886.htmlhttp://www.findstandards.info/StandardsPage/94885.htmlhttp://www.findstandards.info/StandardsPage/94884.htmlhttp://www.findstandards.info/StandardsPage/94883.htmlhttp://www.findstandards.info/StandardsPage/94882.htmlhttp://www.findstandards.info/StandardsPage/94881.htmlhttp://www.findstandards.info/StandardsPage/94880.htmlhttp://www.findstandards.info/StandardsPage/94879.htmlhttp://www.findstandards.info/StandardsPage/94878.htmlhttp://www.findstandards.info/StandardsPage/94877.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
18/89
http://www.findstandards.info
[email protected] | [email protected]
Falling-weight test, small-area indenter
ISO 6274:1982 ISO 6274:1982 Concrete -- Sieve analysis of aggregates
ISO 6279:2006 ISO 6279:2006 Plain bearings - Aluminium alloys for solid bearings
ISO 6280:1981 ISO 6280:1981 Plain bearings - Requirements on backings for thick-walled multilayer bearings
ISO 6281:2007 ISO 6281:2007 Plain bearings - Testing under conditions of hydrodynamic and mixed
lubrication in test rigsISO 6282:1983 ISO 6282:1983 Plain bearings - Metallic thin-walled half bearings - Determination of the sigma
0,01*-limit
ISO 6283:1995 ISO 6283:1995 Refined nickel
ISO 6284:1996 ISO 6284:1996 Construction drawings -- Indication of limit deviations
ISO 6286:1982 ISO 6286:1982 Molecular absorption spectrometry -- Vocabulary -- General -- Apparatus
ISO 6289/Cor1:2005 ISO 6289/Cor1:2005 Skis - Terms and definitions - Corrigendum
ISO 6289:2003 ISO 6289:2003 Skis -- Vocabulary
ISO 629:1982 ISO 629:1982 Steel and cast iron - Determination of manganese content - Spectrophotometric
method
ISO 6292:2008 ISO 6292:2008 Powered industrial trucks and tractors - Brake performance and component
strength
ISO 6293-1:1996 ISO 6293-1:1996 Petroleum products -- Determination of saponification number -- Part 1:
Colour-indicator titration method
ISO 6293-2:1998 ISO 6293-2:1998 Petroleum products -- Determination of saponification number -- Part 2:
Potentiometric titration method
ISO 6296:2000 ISO 6296:2000 Petroleum products -- Determination of water -- Potentiometric Karl Fischer
titration method
ISO 6297:1997 ISO 6297:1997 Petroleum products - Aviation and distillate fuels - Determination of electrical
conductivityISO 6299:1998 ISO 6299:1998 Petroleum products -- Determination of dropping point of lubricating greases
(wide temperature range)
ISO 630/Amd1:2003 ISO 630/Amd1:2003 Structural steels - Amendment 1
ISO 630:1995 ISO 630:1995 Structural steels - Plates, wide flats, bars, sections and profiles
ISO 6301-1:2009 ISO 6301-1:2009 Pneumatic fluid power - Compressed-air lubricators - Part 1: Main
characteristics to be included in suppliers literature and product-marking requirements
ISO 6301-2:2006 ISO 6301-2:2006 Pneumatic fluid power - Compressed-air lubricators - Part 2: Test methods
http://www.findstandards.info/StandardsPage/94917.htmlhttp://www.findstandards.info/StandardsPage/94916.htmlhttp://www.findstandards.info/StandardsPage/94915.htmlhttp://www.findstandards.info/StandardsPage/94914.htmlhttp://www.findstandards.info/StandardsPage/94913.htmlhttp://www.findstandards.info/StandardsPage/94912.htmlhttp://www.findstandards.info/StandardsPage/94911.htmlhttp://www.findstandards.info/StandardsPage/94910.htmlhttp://www.findstandards.info/StandardsPage/94909.htmlhttp://www.findstandards.info/StandardsPage/94908.htmlhttp://www.findstandards.info/StandardsPage/94907.htmlhttp://www.findstandards.info/StandardsPage/94906.htmlhttp://www.findstandards.info/StandardsPage/94905.htmlhttp://www.findstandards.info/StandardsPage/94904.htmlhttp://www.findstandards.info/StandardsPage/94903.htmlhttp://www.findstandards.info/StandardsPage/94902.htmlhttp://www.findstandards.info/StandardsPage/94901.htmlhttp://www.findstandards.info/StandardsPage/94900.htmlhttp://www.findstandards.info/StandardsPage/94899.htmlhttp://www.findstandards.info/StandardsPage/94898.htmlhttp://www.findstandards.info/StandardsPage/94897.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
19/89
http://www.findstandards.info
[email protected] | [email protected]
to determine the main characteristics to be included in suppliers literature
ISO 6302:1993 ISO 6302:1993 Earth-moving machinery -- Drain, fill and level plugs
ISO 630-2:2000 ISO 630-2:2000 Structural steels - Part 2: Technical delivery requirements for hot-finished
hollow sections
ISO 6303:1981 ISO 6303:1981 Pressure vessel steels not included in ISO 2604, Parts 1 to 6 - Derivation of
long-time stress rupture propertiesISO 6305-2:2007 ISO 6305-2:2007 Railway components - Technical delivery requirements - Part 2: Non-alloy
carbon steel baseplates
ISO 6305-3:1983 ISO 6305-3:1983 Railway components -- Technical delivery requirements -- Part 3: Steel
sleepers
ISO 6305-4:1985 ISO 6305-4:1985 Railway components -- Technical delivery requirements -- Part 4: Untreated
steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings
ISO 6308:1980 ISO 6308:1980 Gypsum plasterboard -- Specification
ISO 6309:1987 ISO 6309:1987 Fire protection - Safety signs
ISO 631:1975 ISO 631:1975 Mosaic parquet panels -- General characteristics
ISO 6310:2009 ISO 6310:2009 Road vehicles - Brake linings - Compressive strain test methods
ISO 6311:1980 ISO 6311:1980 Road vehicles - Brake linings - Internal shear strength of lining material - Test
procedure
ISO 6312:2001 ISO 6312:2001 Road vehicles -- Brake linings -- Shear test procedure for disc brake pad and
drum brake shoe assemblies
ISO 6313:1980 ISO 6313:1980 Road vehicles - Brake linings - Effects of heat on dimensions and form of disc
brake pads - Test procedure
ISO 6314:1980 ISO 6314:1980 Road vehicles - Brake linings - Resistance to water, saline solution, oil and
brake fluid - Test procedure
ISO 6315:1980 ISO 6315:1980 Road vehicles - Brake linings - Seizure to ferrous mating surface due tocorrosion - Test procedure
ISO 6316:2008 ISO 6316:2008 Hot-rolled steel strip of structural quality
ISO 6317:2008 ISO 6317:2008 Hot-rolled carbon steel strip of commercial and drawing qualities
ISO 6320/Cor1:2006 ISO 6320/Cor1:2006 Animal and vegetable fats and oils - Determination of refractive
index - Corrigendum
ISO 6320:2000 ISO 6320:2000 Animal and vegetable fats and oils - Determination of refractive index
ISO 6321:2002 ISO 6321:2002 Animal and vegetable fats and oils - Determination of melting point in open
http://www.findstandards.info/StandardsPage/94937.htmlhttp://www.findstandards.info/StandardsPage/94936.htmlhttp://www.findstandards.info/StandardsPage/94935.htmlhttp://www.findstandards.info/StandardsPage/94934.htmlhttp://www.findstandards.info/StandardsPage/94933.htmlhttp://www.findstandards.info/StandardsPage/94932.htmlhttp://www.findstandards.info/StandardsPage/94931.htmlhttp://www.findstandards.info/StandardsPage/94930.htmlhttp://www.findstandards.info/StandardsPage/94929.htmlhttp://www.findstandards.info/StandardsPage/94928.htmlhttp://www.findstandards.info/StandardsPage/94927.htmlhttp://www.findstandards.info/StandardsPage/94926.htmlhttp://www.findstandards.info/StandardsPage/94925.htmlhttp://www.findstandards.info/StandardsPage/94924.htmlhttp://www.findstandards.info/StandardsPage/94923.htmlhttp://www.findstandards.info/StandardsPage/94922.htmlhttp://www.findstandards.info/StandardsPage/94921.htmlhttp://www.findstandards.info/StandardsPage/94920.htmlhttp://www.findstandards.info/StandardsPage/94919.htmlhttp://www.findstandards.info/StandardsPage/94918.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
20/89
-
8/6/2019 Danh Muc Cac Tieu Chuan Iso
21/89
http://www.findstandards.info
[email protected] | [email protected]
of surface durability (pitting)
ISO 6336-3/Cor1:2008 ISO 6336-3/Cor1:2008 Calculation of load capacity of spur and helical gears - Part 3:
Calculation of tooth bending strength - Corrigendum
ISO 6336-3:2006 ISO 6336-3:2006 Calculation of load capacity of spur and helical gears - Part 3: Calculation
of tooth bending strength
ISO 6336-5:2003 ISO 6336-5:2003 Calculation of load capacity of spur and helical gears - Part 5: Strength andquality of materials
ISO 6336-6/Cor1:2007 ISO 6336-6/Cor1:2007 Corrigendum
ISO 6336-6:2006 ISO 6336-6:2006 Calculation of load capacity of spur and helical gears - Part 6: Calculation
of service life under variable load
ISO 6340:1995 ISO 6340:1995 Water quality -- Detection of Salmonella species
ISO 6341/Cor1:1998 ISO 6341/Cor1:1998 Corrigendum
ISO 6341:1996 ISO 6341:1996 Water quality - Determination of the inhibition of the mobility of Daphnia
magna Straus (Cladocera, Crustacea) - Acute toxicity test
ISO 6342:2003 ISO 6342:2003 Micrographics - Aperture cards - Method of measuring thickness of buildup
area
ISO 6344-1:1998 ISO 6344-1:1998 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test
ISO 6344-2:1998 ISO 6344-2:1998 Coated abrasives - Grain size analysis - Part 2: Determination of grain size
distribution of macrogrits P12 to P220
ISO 6344-3/Cor1:1999 ISO 6344-3/Cor1:1999 Corrigendum
ISO 6344-3:1998 ISO 6344-3:1998 Coated abrasives - Grain size analysis - Part 3: Determination of grain size
distribution of microgrits P240 to P2500
ISO 6345:1990 ISO 6345:1990 Shipbuilding and marine structures -- Windows and side scuttles -- Vocabulary
ISO 6346:1995 ISO 6346:1995 Freight containers -- Coding, identification and marking
ISO 6347:2004 ISO 6347:2004 Textile floor coverings - Consumer informationISO 6348:1980 ISO 6348:1980 Textiles -- Determination of mass -- Vocabulary
ISO 6351:1985 ISO 6351:1985 Nickel - Determination of silver, bismuth, cadmium, cobalt, copper, iron,
manganese, lead and zinc contents - Flame atomic absorption spectrometric method
ISO 6352:1985 ISO 6352:1985 Ferronickel - Determination of nickel content - Dimethylglyoxime gravimetric
method
ISO 6353-1:1982 ISO 6353-1:1982 Reagents for chemical analysis -- Part 1 : General test methods
ISO 6353-2/ADD2:1986 ISO 6353-2/ADD2:1986 Addendum 2 to ISO 6353-2:1983
http://www.findstandards.info/StandardsPage/94977.htmlhttp://www.findstandards.info/StandardsPage/94976.htmlhttp://www.findstandards.info/StandardsPage/94975.htmlhttp://www.findstandards.info/StandardsPage/94974.htmlhttp://www.findstandards.info/StandardsPage/94973.htmlhttp://www.findstandards.info/StandardsPage/94972.htmlhttp://www.findstandards.info/StandardsPage/94971.htmlhttp://www.findstandards.info/StandardsPage/94970.htmlhttp://www.findstandards.info/StandardsPage/94969.htmlhttp://www.findstandards.info/StandardsPage/94968.htmlhttp://www.findstandards.info/StandardsPage/94967.htmlhttp://www.findstandards.info/StandardsPage/94966.htmlhttp://www.findstandards.info/StandardsPage/94965.htmlhttp://www.findstandards.info/StandardsPage/94964.htmlhttp://www.findstandards.info/StandardsPage/94963.htmlhttp://www.findstandards.info/StandardsPage/94962.htmlhttp://www.findstandards.info/StandardsPage/94961.htmlhttp://www.findstandards.info/StandardsPage/94960.htmlhttp://www.findstandards.info/StandardsPage/94959.htmlhttp://www.findstandards.info/StandardsPage/94958.htmlhttp://www.findstandards.info/StandardsPage/94957.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
22/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 6353-2:1983 ISO 6353-2:1983 Reagents for chemical analysis -- Part 2 : Specifications -- First series
ISO 6353-3:1987 ISO 6353-3:1987 Reagents for chemical analysis -- Part 3 : Specifications -- Second series
ISO 6356:2000 ISO 6356:2000 Textile floor coverings - Assessment of static electrical propensity - Walking
test
ISO 6357:1985 ISO 6357:1985 Documentation -- Spine titles on books and other publications
ISO 6358:1989 ISO 6358:1989 Pneumatic fluid power -- Components using compressible fluids --Determination of flow-rate characteristics
ISO 636:2004 ISO 636:2004 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of
non-alloy and fine-grain steels - Classification
ISO 6360-1/Cor1:2007 ISO 6360-1/Cor1:2007 Dental rotary instruments - Number coding system - Part 1:
General characteristics - Corrigendum
ISO 6360-1:2004 ISO 6360-1:2004 Dentistry - Number coding system for rotary instruments - Part 1: General
characteristics
ISO 6360-2:2004 ISO 6360-2:2004 Dentistry - Number coding system for rotary instruments - Part 2: Shapes
ISO 6360-3:2005 ISO 6360-3:2005 Dentistry - Number coding system for rotary instruments - Part 3: Specific
characteristics of burs and cutters
ISO 6360-4:2004 ISO 6360-4:2004 Dentistry - Number coding system for rotary instruments - Part 4: Specific
characteristics of diamond instruments
ISO 6360-5:2007 ISO 6360-5:2007 Dentistry - Number coding system for rotary instruments - Part 5: Specific
characteristics of root-canal instruments
ISO 6360-6:2004 ISO 6360-6:2004 Dentistry - Number coding system for rotary instruments - Part 6: Specific
characteristics of abrasive instruments
ISO 6360-7:2006 ISO 6360-7:2006 Dentistry - Number coding system for rotary instruments - Part 7: Specific
characteristics of mandrels and special instruments
ISO 6361-1:1986 ISO 6361-1:1986 Wrought aluminium and aluminium alloy sheets, strips and plates - Part 1 :Technical conditions for inspection and delivery
ISO 6361-2:1990 ISO 6361-2:1990 Wrought aluminium and aluminium alloy sheets, strips and plates - Part 2:
Mechanical properties
ISO 6361-3:1985 ISO 6361-3:1985 Wrought aluminium and aluminium alloy sheets, strips and plates - Part 3 :
Strips - Tolerances on shape and dimensions
ISO 6361-4:1988 ISO 6361-4:1988 Wrought aluminium and aluminium alloy sheets, strips and plates - Part 4 :
Sheets and plates - Tolerances on form and dimensions
http://www.findstandards.info/StandardsPage/94995.htmlhttp://www.findstandards.info/StandardsPage/94994.htmlhttp://www.findstandards.info/StandardsPage/94993.htmlhttp://www.findstandards.info/StandardsPage/94992.htmlhttp://www.findstandards.info/StandardsPage/94991.htmlhttp://www.findstandards.info/StandardsPage/94990.htmlhttp://www.findstandards.info/StandardsPage/94989.htmlhttp://www.findstandards.info/StandardsPage/94988.htmlhttp://www.findstandards.info/StandardsPage/94987.htmlhttp://www.findstandards.info/StandardsPage/94986.htmlhttp://www.findstandards.info/StandardsPage/94985.htmlhttp://www.findstandards.info/StandardsPage/94984.htmlhttp://www.findstandards.info/StandardsPage/94983.htmlhttp://www.findstandards.info/StandardsPage/94982.htmlhttp://www.findstandards.info/StandardsPage/94981.htmlhttp://www.findstandards.info/StandardsPage/94980.htmlhttp://www.findstandards.info/StandardsPage/94979.htmlhttp://www.findstandards.info/StandardsPage/94978.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
23/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 6362-1:1986 ISO 6362-1:1986 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and
profiles - Part 1 : Technical conditions for inspection and delivery
ISO 6362-2:1990 ISO 6362-2:1990 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and
profiles - Part 2: Mechanical properties
ISO 6362-3:2001 ISO 6362-3:2001 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and
profiles -- Part 3: Extruded rectangular bars -- Tolerances on shape and dimensionsISO 6362-4:1988 ISO 6362-4:1988 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and
profiles - Part 4 : Extruded profiles - Tolerances on shape and dimensions
ISO 6362-5:2001 ISO 6362-5:2001 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and
profiles -- Part 5: Extruded round, square and hexagonal bars -- Tolerances on shape and dimensions
ISO 6363-1:1988 ISO 6363-1:1988 Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -
Part 1: Technical conditions for inspection and delivery
ISO 6363-2:1993 ISO 6363-2:1993 Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -
Part 2: Mechanical properties
ISO 6363-4:1991 ISO 6363-4:1991 Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -
Part 4: Drawn rectangular bars - Tolerances on form and dimensions
ISO 6363-5:1992 ISO 6363-5:1992 Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes -
Part 5: Drawn square and hexagonal bars - Tolerances on form and dimensions
ISO 6365-1:1988 ISO 6365-1:1988 Wrought aluminium and aluminium alloy cold-drawn wire - Part 1 :
Technical conditions for inspection and delivery
ISO 6370-1:1991 ISO 6370-1:1991 Vitreous and porcelain enamels - Determination of the resistance to
abrasion - Part 1: Abrasion testing apparatus
ISO 6370-2:1991 ISO 6370-2:1991 Vitreous and porcelain enamels - Determination of the resistance to
abrasion - Part 2: Loss in mass after sub-surface abrasion
ISO 6372-1:1989 ISO 6372-1:1989 Nickel and nickel alloys - Terms and definitions - Part 1: MaterialsISO 6372-2:1989 ISO 6372-2:1989 Nickel and nickel alloys - Terms and definitions - Part 2: Refinery products
ISO 6372-3:1989 ISO 6372-3:1989 Nickel and nickel alloys - Terms and definitions - Part 3: Wrought products
and castings
ISO 6374:1981 ISO 6374:1981 Cryolite, natural and artificial, and aluminium fluoride for industrial use --
Determination of phosphorus content -- Atomic absorption spectrometric method after extraction
ISO 6375:1980 ISO 6375:1980 Carbonaceous materials for the production of aluminium -- Coke for electrodes
-- Sampling
http://www.findstandards.info/StandardsPage/95012.htmlhttp://www.findstandards.info/StandardsPage/95011.htmlhttp://www.findstandards.info/StandardsPage/95010.htmlhttp://www.findstandards.info/StandardsPage/95009.htmlhttp://www.findstandards.info/StandardsPage/95008.htmlhttp://www.findstandards.info/StandardsPage/95007.htmlhttp://www.findstandards.info/StandardsPage/95006.htmlhttp://www.findstandards.info/StandardsPage/95005.htmlhttp://www.findstandards.info/StandardsPage/95004.htmlhttp://www.findstandards.info/StandardsPage/95003.htmlhttp://www.findstandards.info/StandardsPage/95002.htmlhttp://www.findstandards.info/StandardsPage/95001.htmlhttp://www.findstandards.info/StandardsPage/95000.htmlhttp://www.findstandards.info/StandardsPage/94999.htmlhttp://www.findstandards.info/StandardsPage/94998.htmlhttp://www.findstandards.info/StandardsPage/94997.htmlhttp://www.findstandards.info/StandardsPage/94996.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
24/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 6376:1980 ISO 6376:1980 Carbonaceous materials for the production of aluminium -- Pitch for electrodes
-- Determination of content of toluene-insoluble material
ISO 638:2008 ISO 638:2008 Paper, board and pulps - Determination of dry matter content - Oven-drying
method
ISO 6382:1981 ISO 6382:1981 General method for determination of silicon content -- Reduced molybdosilicate
spectrophotometric methodISO 6383-1:1983 ISO 6383-1:1983 Plastics - Film and sheeting - Determination of tear resistance - Part 1 :
Trouser tear method
ISO 6383-2:1983 ISO 6383-2:1983 Plastics - Film and sheeting - Determination of tear resistance - Part 2 :
Elmendorf method
ISO 6384:1981 ISO 6384:1981 Surface active agents -- Technical ethoxylated fatty amines -- Methods of
analysis
ISO 6385:2004 ISO 6385:2004 Ergonomic principles in the design of work systems
ISO 6387:1983 ISO 6387:1983 Surface active agents -- Determination of the power to disperse calcium soap --
Acidimetric method (Modified Schoenfeldt method)
ISO 6388:1989 ISO 6388:1989 Surface active agents -- Determination of flow properties using a rotational
viscometer
ISO 639-1:2002 ISO 639-1:2002 Codes for the representation of names of languages - Part 1: Alpha-2 code
ISO 639-2:1998 ISO 639-2:1998 Codes for the representation of names of languages -- Part 2: Alpha-3 code
ISO 6392-1:1996 ISO 6392-1:1996 Earth-moving machinery -- Lubrication fittings -- Part 1: Nipple type
ISO 6392-2:1996 ISO 6392-2:1996 Earth-moving machinery -- Lubrication fittings -- Part 2: Grease-gun
nozzles
ISO 639-3:2007 ISO 639-3:2007 Codes for the representation of names of languages - Part 3: Alpha-3 code for
comprehensive coverage of languages
ISO 6393:2008 ISO 6393:2008 Earth-moving machinery - Determination of sound power level - Stationary testconditions
ISO 6394/Cor1:2009 ISO 6394/Cor1:2009 Acoustics - Measurement of airborne noise emitted by earth-moving
machinery - Operators position Stationary test condition - Corrigendum 1
ISO 6394:2008 ISO 6394:2008 Earth-moving machinery - Determination of emission sound pressure level at
operators position - Stationary test conditions
ISO 6395:2008 ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test
conditions
http://www.findstandards.info/StandardsPage/95030.htmlhttp://www.findstandards.info/StandardsPage/95029.htmlhttp://www.findstandards.info/StandardsPage/95028.htmlhttp://www.findstandards.info/StandardsPage/95027.htmlhttp://www.findstandards.info/StandardsPage/95026.htmlhttp://www.findstandards.info/StandardsPage/95025.htmlhttp://www.findstandards.info/StandardsPage/95024.htmlhttp://www.findstandards.info/StandardsPage/95023.htmlhttp://www.findstandards.info/StandardsPage/95022.htmlhttp://www.findstandards.info/StandardsPage/95021.htmlhttp://www.findstandards.info/StandardsPage/95020.htmlhttp://www.findstandards.info/StandardsPage/95019.htmlhttp://www.findstandards.info/StandardsPage/95018.htmlhttp://www.findstandards.info/StandardsPage/95017.htmlhttp://www.findstandards.info/StandardsPage/95016.htmlhttp://www.findstandards.info/StandardsPage/95015.htmlhttp://www.findstandards.info/StandardsPage/95014.htmlhttp://www.findstandards.info/StandardsPage/95013.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
25/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 639-5:2008 ISO 639-5:2008 Codes for the representation of names of languages - Part 5: Alpha-3 code for
language families and groups
ISO 6396/Cor1:2009 ISO 6396/Cor1:2009 Acoustics - Measurement at the operators position of noise emitted
by earth-moving machinery - Dynamic test conditions - Corrigendum 1
ISO 6396:2008 ISO 6396:2008 Earth-moving machinery - Determination of emission sound pressure level at
operators position - Dynamic test conditionsISO 6401:2008 ISO 6401:2008 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride
monomer - Gas-chromatographic method
ISO 6402-1:2002 ISO 6402-1:2002 Plastics -- Acrylonitrile-styrene-acrylate (ASA),
acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene
(ACS) moulding and extrusion materials -
ISO 6402-2:2003 ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA),
acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene
(ACS) moulding and extrusion materials -
ISO 6403:1988 ISO 6403:1988 Hydraulic fluid power - Valves controlling flow and pressure - Test methods
ISO 6405-1:2004 ISO 6405-1:2004 Earth-moving machinery - Symbols for operator controls and other displays
- Part 1: Common symbols
ISO 6405-2/AMD1:1997 ISO 6405-2/AMD1:1997 AMENDMENT 1 to ISO 6405-2:1993 Additional symbols
ISO 6405-2/Amd2:2004 ISO 6405-2/Amd2:2004 Earth-moving machinery - Symbols for operator controls and
other displays - Part 2: Specific symbols for machines, equipment and accessories - Amendment 2: Additional
symbols
ISO 6405-2:1993 ISO 6405-2:1993 Earth-moving machinery -- Symbols for operator controls and other
displays -- Part 2: Specific symbols for machines, equipment and accessories
ISO 6406:2005 ISO 6406:2005 Gas cylinders - Seamless steel gas cylinders - Periodic inspection and testing
ISO 641:1975 ISO 641:1975 Laboratory glassware -- Interchangeable spherical ground jointsISO 6410-1:1993 ISO 6410-1:1993 Technical drawings - Screw threads and threaded parts - Part 1: General
conventions
ISO 6410-2:1993 ISO 6410-2:1993 Technical drawings - Screw threads and threaded parts - Part 2: Screw
thread inserts
ISO 6410-3:1993 ISO 6410-3:1993 Technical drawings - Screw threads and threaded parts - Part 3: Simplified
representation
ISO 6411:1982 ISO 6411:1982 Technical drawings -- Simplified representation of centre holes
http://www.findstandards.info/StandardsPage/95047.htmlhttp://www.findstandards.info/StandardsPage/95046.htmlhttp://www.findstandards.info/StandardsPage/95045.htmlhttp://www.findstandards.info/StandardsPage/95044.htmlhttp://www.findstandards.info/StandardsPage/95043.htmlhttp://www.findstandards.info/StandardsPage/95042.htmlhttp://www.findstandards.info/StandardsPage/95041.htmlhttp://www.findstandards.info/StandardsPage/95040.htmlhttp://www.findstandards.info/StandardsPage/95039.htmlhttp://www.findstandards.info/StandardsPage/95038.htmlhttp://www.findstandards.info/StandardsPage/95037.htmlhttp://www.findstandards.info/StandardsPage/95036.htmlhttp://www.findstandards.info/StandardsPage/95035.htmlhttp://www.findstandards.info/StandardsPage/95034.htmlhttp://www.findstandards.info/StandardsPage/95033.htmlhttp://www.findstandards.info/StandardsPage/95032.htmlhttp://www.findstandards.info/StandardsPage/95031.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
26/89
http://www.findstandards.info
[email protected] | [email protected]
ISO 6412-1:1989 ISO 6412-1:1989 Technical drawings -- Simplified representation of pipelines -- Part 1:
General rules and orthogonal representation
ISO 6412-2:1989 ISO 6412-2:1989 Technical drawings -- Simplified representation of pipelines -- Part 2:
Isometric projection
ISO 6412-3:1993 ISO 6412-3:1993 Technical drawings -- Simplified representation of pipelines -- Part 3:
Terminal features of ventilation and drainage systemsISO 6413:1988 ISO 6413:1988 Technical drawings - Representation of splines and serrations
ISO 6414:1982 ISO 6414:1982 Technical drawings for glassware
ISO 6415:2005 ISO 6415:2005 Internal combustion engines - Spin-on filters for lubricating oil - Dimensions
ISO 6416:2004 ISO 6416:2004 Hydrometry - Measurement of discharge by the ultrasonic (acoustic) method
ISO 642:1999 ISO 642:1999 Steel -- Hardenability test by end quenching (Jominy test)
ISO 6420:1984 ISO 6420:1984 Liquid flow measurement in open channels - Position fixing equipment for
hydrometric boats
ISO 6422:1985 ISO 6422:1985 Layout key for trade documents
ISO 6425:1996 ISO 6425:1996 Divers watches'
ISO 6426-1:1982 ISO 6426-1:1982 Horological vocabulary -- Part 1 : Technical and scientific definitions
ISO 6426-2/Cor1:2003 ISO 6426-2/Cor1:2003 Horological vocabulary - Part 2: Technico-commercial
definitions - Corrigendum
ISO 6426-2:2002 ISO 6426-2:2002 Horological vocabulary - Part 2: Technical and commercial definitions
ISO 6428:1982 ISO 6428:1982 Technical drawings -- Requirements for microcopying
ISO 643:2003 ISO 643:2003 Steels - Micrographic determination of the apparent grain size
ISO 6430:1992 ISO 6430:1992 Pneumatic fluid power -- Single rod cylinders, 1 000 kPa (10 bar) series, with
integral mountings, bores from 32 mm to 250 mm -- Mounting dimensions
ISO 6432:1985 ISO 6432:1985 Pneumatic fluid power -- Single rod cylinders -- 10 bar (1 000 kPa) series --
Bores from 8 to 25 mm -- Mounting dimensionsISO 6433:1981 ISO 6433:1981 Technical drawings -- Item references
ISO 6437:1984 ISO 6437:1984 Copper alloys - Determination of chromium content - Titrimetric method
ISO 6438:1983 ISO 6438:1983 Documentation -- African coded character set for bibliographic information
interchange
ISO 6439:1990 ISO 6439:1990 Water quality - Determination of phenol index - 4-Aminoantipyrine
spectrometric methods after distillation
ISO 6442:2005 ISO 6442:2005 Door leaves - General and local flatness - Measurement method
http://www.findstandards.info/StandardsPage/95070.htmlhttp://www.findstandards.info/StandardsPage/95069.htmlhttp://www.findstandards.info/StandardsPage/95068.htmlhttp://www.findstandards.info/StandardsPage/95067.htmlhttp://www.findstandards.info/StandardsPage/95066.htmlhttp://www.findstandards.info/StandardsPage/95065.htmlhttp://www.findstandards.info/StandardsPage/95064.htmlhttp://www.findstandards.info/StandardsPage/95063.htmlhttp://www.findstandards.info/StandardsPage/95062.htmlhttp://www.findstandards.info/StandardsPage/95061.htmlhttp://www.findstandards.info/StandardsPage/95060.htmlhttp://www.findstandards.info/StandardsPage/95059.htmlhttp://www.findstandards.info/StandardsPage/95058.htmlhttp://www.findstandards.info/StandardsPage/95057.htmlhttp://www.findstandards.info/StandardsPage/95056.htmlhttp://www.findstandards.info/StandardsPage/95055.htmlhttp://www.findstandards.info/StandardsPage/95054.htmlhttp://www.findstandards.info/StandardsPage/95053.htmlhttp://www.findstandards.info/StandardsPage/95052.htmlhttp://www.findstandards.info/StandardsPage/95051.htmlhttp://www.findstandards.info/StandardsPage/95050.htmlhttp://www.findstandards.info/StandardsPage/95049.htmlhttp://www.findstandards.info/StandardsPage/95048.html -
8/6/2019 Danh Muc Cac Tieu Chuan Iso
27/89