1
CUSTOMER
ATTENTION 1 Normal
ATTENTION 2 42X42mm
MODEL CO-42SN9EV
CODE NO
Color Camera Module
SPECIFICATIONS
Feb. 3. 2012
Supplier Customer
/ /
2
Table of Contents
- Revision History
1. Features --------------------------------------------------------------- 4
2. Applications & Information ------------------------------------ 5
2-1. General Specifications & Functions -------------------------- 5
2-2. Block Diagram ------------------------------------------------------ 6
2-3. I/O Interface Specifications ------------------------------------- 7
2-3-1. I/O Circuit ------------------------------------------------------ 7
2-3-2. I/O Specifications -------------------------------------------- 8
2-3-3. PCB Layout --------------------------------------------------- 10
2-4. PCB Outline Dimensions ---------------------------------------- 11
2-5. OSD Menu tree ---------------------------------------------------- 12
2-6. OSD Menu Functions --------------------------------------------- 13
3. Packing Information ---------------------------------------------- 26
4. Reference Data Sheet ------------------------------------------- 27
4-1. Spectral Sensitivity Characteristics --------------------------- 27
4-2. OLPF( Optical Low Pass Filter ) Specifications --------- 28
4-2-1. OLPF for lens with Day&Night moving filter ------- 28
4-2-2. OLPF for general lens ------------------------------------ 28
4-3. I/O Connector Specifications ----------------------------------- 29
5. UART Protocol
5-1. Connection ---------------------------------------------------------- 30
5-2. Communication Protocol -------------------------------------- 30
5-3. Communication Command ----------------------------------- 30
3
- Revision History
Date Version Description
Dec.17 2013
Feb.02 2014
Feb.19 2014
0A
0B
1A
Establishment
Update
Specification Update
4
1. Features
■ 1/3" 520K/610K Sony Dual Scan HAD CCD II,
Minimum Resolution 0.1 Lux (F1.2, 50 IRE)
S/N Ratio 52dB
■ High Resolution 700 TV LinesThis camera has realized high resolution of 700 TV lines using the top-notch full digital image
processing, 12 Bit A/D serial signal processing and special algorithm technologies.
■ DNR (Digital Noise Reduction, 2D+3D)The DNR technology eliminates noise thus generating a distinct and clear image.
■ DAY&NIGHT (Output the Filter changing signal)
This camera has the DayNight function which outputs the filter changing signal with detecting
the illumination condition.
DayNight operation feature an ‘auto’ mode which switches between day and night mode
automatically based upon the level of illumination on the scene.
EXT mode changes between day and night operation upon triggering from an external
source(Optional).
And also, the COLOR mode operates in daytime conditions to provide optimum colors,
and B/W mode operates in night-time conditions to enhance the definition of the image.
■ OSD (On Screen Display)
This camera supports the OSD function which is used with multi languages. And so, the
camera can be controlled bye selecting text displayed on the monitor screen.
■ WDR (Wide Dynamic Range)
This camera function is to produce a clear and balanced image by capturing both the bright
and dark areas of the camera view. In essence, it can process a wide rage of light by
minimizing saturation from areas of direct sunlight and enhancing darker indoor areas.
■ SENS-UP
This camera automatically detects the ambient level of darkness in the dark or low contrast
scene to extend the accumulated time, keeping the image bright and sharp.
■ SMART IR
This camera function is to recognize things under low illumination by controlling IR intensity of
radiation and AE in accordance with changes of camera surrounding.
5
2. Applications & Information
2-1. General Specifications & Functions
Items Sub-items NTSC PAL
CCD
Device ICX662AK ICX663AK
Total 1028(H) X 508(V) 1028(H) X 596(V)
Effective 976(H) X 494(V) 976(H) X 582(V)
Sync.Inter. H/V 15,734/59.94Hz 15,625/50Hz
LL H/V 15,750/60Hz 15,625/50Hz
Performance
Horizontal/Vertical Resolution 700 TV Lines
Minimum Illumination(F1.2)Color : 0.1 Lux(50IRE) / 0.02 Lux(15IRE)
B/W : 0.08Lux(50IRE) / 0.002 Lux(15IRE)
S/N Ratio 52dB
Functions
OSDEnglish/Japaness/German/French/Russian
Portuguese/Spanish/Chinese(License option)
Day&Night Auto(Int or Ext1, 2) / Day / Night
ATW 1800 ~ 10500K
High Speed Shutter 1/60(1/50) ~ 1/10Ksec
Flicker-less Off/On(External Optional)
ATR(Adaptive Tone Reproduction)Contrast(LOW,MID,HIGH),
Clear Face(OFF,LOW,MID.HIGH)
AGC Level Setting
AUTO iris DC Auto Iris
MANUAL iris Off/On (Level Setting)
Line Lock Off/On (Phase Control)
Camera ID Off/On (Letters A to Z, Numerals 0 to 9, Symbols)
White Balance ATW/PUSH/USER1/USER2/MANUAL/PUSH LOCK
DNR Off/3D-NR(LEVEL0~6)
Gamma(r) 0.45
Color Gain Control Level Setting
Motion Detection 4 Area (On/Off, Position, Sensitivity)
Privacy Mask 15 Area (On/Off, Color, Position)
Sens-up Off/Auto
Etc. Function Defog, DIS,Ezoom, UTC, IROPTIMIZER, ANTI CR
In/OutputAlarm Output 1 ea(Open Collector) #Option
Video Output VBS/Monitor 1.0V p-p (75ohm Terminated)
PowerPower Input DC 12V±10%
Power Consumption Less than 1.5Watts
Operating Temperature Absolute : -10˚C ~ +50˚C
Operating Humidity Less than 90%
Dimension 42mm x 42mm, 1.0t
2-2. Block Diagram
POWER
VIDEO
CONTOL
CCD
IC1
662/663
CCD
OUT
DIGITAL
DATA
RESET
IC8
XC61FN
2512MR
AFE
IC3
CXD5148GG
MOTOR DRIVE
IC7
Nor, IR : BH6578FVMMA,MB,MSAVE
MA+,MA-
RESET
RXD2,TXD2
VIDEO AMP
IC15
NJM2274R
IRIS
IC6(NJM3414A)IRIS,OFFSET
DSP
IC18
CXD4141GG
POWER
(IC2,5,9,10,Q2)
+15V
+3.3V
+5V
+1.1V
-7.0V
+3.3REG
CONTROL
VIDEO
I/O
UART
LENS
+12V
TGV-Driver/H-Driver
Flash Memory
IC11
EN25Q40-100GIP
MEMCS,AFE_XSO,CAMSI,
AFE_SCK
2-3. I/O Interface Specifications
2-3-1. I/O Circuit
8
2-3-2. I/O SpecificationsBottom View
④
③
②
①
⑤
▼ ▶
▶
▶
◀
① CN5 : Main I/O Connector
Pin NO Pin Name Description Normal Active I/O
1 GND Board Ground - - G
2 V+12V DC+12V Input - - P
3 ALAOUT Alarm Output Open 0V(Ground) O
4 LPULSE Line Lock Control Clock - 60Hz/50Hz I
5 VBS Composite Video Output(Main) - 1Vp-p O
6 GND Board Ground - - G
7 MONITOR Composite Video Output(sub) - 1Vp-p O
8 K-D OSD Control Down 3.3V 0V(Ground) I
9 K-U OSD Control Up 3.3V 0V(Ground) I
10 KEY3(K-E) OSD Control Enter 3.3V 0V(Ground) I
11 K-R OSD Control Right 3.3V 0V(Ground) I
12 K-L OSD Control Left 3.3V 0V(Ground) I
13 MA1 IR LED Control Output 0V(Ground) 3.3V O
14 CDS External CDS Select Input 0V Analog V I
15 D/N-SEL External Day & Night Select Input Open(3.3V) 0V(Ground) I
Yeonho Electronics, 12505WS-15A00
② CN4 : Day & Night Motor Control Connector
Pin NO Pin Name Description Normal Active I/O
1 MA1+ Day & Night Motor Drive - Output Open 0V/5V O
2 MA1- Day & Night Motor Drive + Output Open 5V/0V O
Yeonho Electronics, 12505WS-02A00
9
③ CN2 : Auto Iris Lens Control Connector
Pin NO Pin Name Description Normal Active I/O
1 DAMP+ DC Iris Damping Motor + - Analog V O
2 DAMP- DC Iris Damping Motor - - Analog V O
3 DRIVE DC Iris Motor Drive/ - Analog V O
4 GND Board GROUND - Analog V G
Yeonho Electronics, 12505WS-04A00
④ CN3 : Connector for Uart Communication
Pin NO Pin Name Description Active I/O
1 UPGRADE JTAG DOWN - -
2 V+3.3V DC +3.3V Output(Max 100mA) 3.3V P
3 GND Board Ground - G
4 TXD2 Down Load Uart 3.3V TTL Transmitter 3.3V/0V O
5 RXD2 Down Load Uart 3.3V TTL Receiver 3.3V/0V I
Yeonho Electronics, 12505WS-05A00
⑤ CN6 : Aux I/O Connector
Pin NO Pin Name Description Normal Active I/O
1 V+12V DC+12V Input - - P
2 GND Board Ground - - G
3 LPULSE Line Lock Control Clock - 60Hz/50Hz I
4 GND Board Ground - - G
5 GND Board Ground - - G
6 VBS Composite Video Output(Main) - 1Vp-p O
Yeonho Electronics, 12505WS-06A00
10
2-3-3. PCB Layout
<TOP VIEW>
<BOTTOM VIEW>
11
2-4. PCB Outline Dimensions
12
2-5. OSD Menu tree
Main Menu Sub Menu Descriptions
SCENE SELECT
FULL AUTO This mode supports various shooting scenes.
INDOOR This mode is specialized to indoor scenes.
OUTDOOR This mode is specialized to outdoor scenes.
BACKLIGHTThis mode is specialized to scenes that mix indoor and
outdoor conditions.
ITSThis mode is specialized to scense where moving
subjects enter the picture.
CUSTOMThis mode turns off the auto scens recognition.
All functions can be set and adjusted manually.
SHUTTER/AGC
AUTO Exposure Countrol is performed automatically.
MANUAL Exposure Countrol is performed manually.
FIXExposure control is stoped. AE does not track even if
the subject brightness changes.
WHITE BAL
ATW Speed, Delay time, Frame size, Environment(in/outdoor)
PUSH All pull-in
USER1 Outdoor fixed gain
USER2 Fluorescent light fixed gain
MANUAL R gain, B gain setting
PUSH LOCK pull-in and Hold
HLC/BLCBLC Back light compensation
HLC High light compensation
ATR-EX/WDR
OFF ATR-EX/WDR Off.
ATR-EX ATR-EX(Adaptive Tone Reproduction) On.
WDR WDR(Wide Dynamic Range) On.
DNR LEVEL Digital noise reduction
DAY/NIGHT
DELAY CNT Sets the Night/Day identification transfer time
DAY->NIGHTSets the threshold for identifying the Night status from
the Day status.
NIGHT->DAYSets the threshold for identifying the Day status from
the Night status.
IR OPTIMIZER
MODE Selects AE window type for IR Optimizer
IR AREA Sets AE window area in Center mode.
LEVEL Sets AE servo speed for IR Optiimzer.
COLOR NIGHT Sets Color On or Off in Night mode
13
IR SHADING COMP Sets IR shading compensation in Night mode
PICT ADJUST
BRIGHTNESS Adjusts the brightness.
CONTRAST Sets the screen contrast
SHARPNESS Sets the screen sharpness
HUE Adjusts the hue
COLOR GAIN Adjusts the gain
EZOOM
MAG Enlarges the screen with DIGITAL ZOOM.
PAN Move the screen left and right in D-ZOOM setting
TILT Moves the screen up and down in D-ZOOM setting
DISOFF Off Dis(digital image stabilization)
ON On Dis(digital image stabilization)
PRIVACY MASK
AREA SEL Selects the privacy zone number to be adjusted
DISPLAY Sets the selected privacy zone to ON or OFF
POSITION Sets the privacy mask position
COLOR Sets the colors of the mask position
TRANSP Sets the transparency ratio of the mask position.
MOSAIC Sets the mask position mosaic to ON or OFF
MOTION DET
DETECT SENSE Sets the motion detection sensitivity
INTERVAL Sets the motion detection interval time
BLOCK DISPControls the ON/OFF status of the motion detection
block display
DETECT AREA Sets the motion detection area
MONITOR AREA Sets the Monitoring area.
SYSTEM SET SYNC The current synchronization mode
LENS Sets the Iris speed and selects the ALC/ELC
FLIP Sets the image mirror
LCD/CRT Selects the display output destination device type.
COMMUNICATION Sets the Communication
CAMERA ID Sets Camera ID
LANGUAGE LANGUAGE Selects Language
VERSION VERSION Camera Version.
MAINTENANCEWHITE PIX MASK Adjusts the white pixel compensation.
CAMERA RESET Initializes the User item value.
EXIT Sets Camera Default
14
2-6 OSD Menu Functions
◆ Main Menu
■ SCENE SELECT
The function is used to set the auto scene recornition and to select a shooting scene.
press the "ⓔ"switch to select the ADVANCED MENU.
■ PICT ADJUSTThe function is used to set the image adjustment items(brightness,contrast,sharpness,hue,gain).
■ EZOOMThe function is used to set the digital zoom factor and position..
■ DISDigital Image Stabilization will set the anti-shake compensation.
■ PRIVACY MASKThe function is used to set up to 15 privacy masks.
■ MOTION DET
The function is used to set the motion detection operation.
■ SYSTEM SETTING
The function is used to set the camera Title and communication and camera ID.
■ LANGUAGE
The function is used to select the language in which to display the internal OSD menu.
15
■ VERSIONThe function is used to display the camera version.
■ MAINTENANCEThe function is used to Adjust white pixel compensation and to initializes the User item value.
■ EXIT
The function is used to save the various settings of the internal OSD menu in the EEPROM
together. EXIT is always displayed on the bottom line of the top menu.
Its display position cannot be changed.
16
KEY FUNCTIONS▲: Up▼ : Down◀ : Left▶ : Rightⓔ : Enter(Setup)
◆ ADVANCED MENU
FUNCTION OPTION DESCRIPTION
SCENE SELECT
FULL AUTO
This mode supports various shooting scenes. It is not specialized
to any particular scene, so it allows average shooting in any
situation.
INDOORThis mode is specialized to indoor scenes, such as indoor shop
surveillance. It allows natural shooting with high contrast.
OUTDOOR
This mode is specialized to outdoor scenes, such as road
surveillance. It features high contrast and resolution, and allows
shooting with high visibilityeven in foggy outdoor conditions.
BACKLIGHT
This mode is specialized to scenes that mix indoor and outdoor
conditions, such as entranceway surveillance. It allow shooting
with high visibility and a high dynamic range, even under
backlighting conditions
ITS
This mode is specialized to scense where moving subjects enter
the picture, such as traffic surveillance scenes. It allow high-
resolution shooting of moving subjects with low blue
CUSTOMThis mode turns off the auto scens recognition. all functions can
be set and adjusted manually.
17
■ FULL AUTO, INDOOR, OUTDOOR, BACKLIGHT, ITS, CUSTOM "ⓔ"
FUNCTION OPTION DESCRIPTION
SHUTTER/AGC
"◀" "▶"
AUTO, MANUAL,
FIX
Exposure control
WHITE BAL
"◀" "▶"
ATW, PUSH, USER1,
USER2,
MANUAL,
PUSHLOCK
White balance control
HLC/BLC"◀" "▶"
OFF, HLC, BLCHLC and BLC control
WDR/ATR-EX
"◀" "▶"
OFF, ATR-EX,
WDR
WDR and ATR-EX control
DNR "ⓔ" DNR control
DAY/NIGHT"◀" "▶"
AUTO, DAY, NIGHTDAY/NIGHT control
IR OPTIMIZER"◀" "▶"
OFF, ONOverexposure optiimizing when Night operation mode
LENS SHD
COMP
"◀" "▶"
OFF, ONLens shading compensation.
DEFOG"◀" "▶"
OFF, ONDefog control
FLK LESS"◀" "▶"
OFF, ON, AUTOFlicker control
ANTI CR"◀" "▶"
OFF, ON, AUTOColor rolling control
18
◆ SHUTTER/AGC
FUNCTION OPTION DESCRIPTION
SHUTTER/AGC
AUTO Exposure Countrol is performed automatically.
MANUAL Exposure Countrol is performed manually.
FIXExposure control is stoped. AE does not track even if
the subject brightness changes.
■ AUTO "ⓔ"
FUNCTION OPTION DESCRIPTION
AE LEVEL"◀" "▶"
1 - 250Adjusts the AE reference level.
AGC MAX
"◀" "▶"
6dB,12dB,18dB,24dB,
30dB, 36dB,42dB,
44.8dB
Sets the scene agc max gain
SENS UP"◀" "▶"
OFF, AUTOSets the screen sens-up
■ MANUAL "ⓔ"
19
FUNCTION OPTION DESCRIPTION
SHUTTER
"◀" "▶"
256FLD ~ 2FLD,
1/60, 1/120, 1/250
1/500, 1/1000, 1/2000,
1/4000, 1/10000
Sets the ME shutter speed
AGC MAX
"◀" "▶"
6dB,12dB,18dB,24dB,
30dB, 36dB,42dB,
44.8dB
Sets the scene agc max gain
■ FIX "ⓔ"
FUNCTION OPTION DESCRIPTION
SHUTTER
"◀" "▶"
256FLD ~ 2FLD
1/60, 1/120, 1/250
1/500, 1/1000, 1/2000,
1/4000, 1/10000
Sets the ME shutter speed
AGC
"◀" "▶"
6dB,12dB,18dB,24dB,
30dB, 36dB,42dB,
44.8dB
Sets the current agc gain
20
◆ WHITE BAL
FUNCTION OPTION DESCRIPTION
WHITE BAL
ATW Auto trace white balance
PUSH All pull-in
USER1 Outdoor fixed gain
USER2 Fluorescent light fixed gain
MANUAL Manual white balance
PUSH LOCK pull-in and Hold
■ ATW "ⓔ"
FUNCTION OPTION DESCRIPTION
SPEED"◀" "▶"
0 - 255Adjusts the pull-in speed ATW
DELAY CNT"◀" "▶"
1 - 255Sets the time-based hysteresis of ATW
ATW FRAME"◀" "▶"
1 - 255Sets the pull-in frame magnification
ENVIRONMENT
"◀" "▶"
Indoor, Sunny,
Shade, auto
Sets the pull-in frame(indoor/outdoor)of ATW
■ USER1 "ⓔ"
21
FUNCTION OPTION DESCRIPTION
B-GAIN"◀" "▶"
000 - 255Used for operating the B gain in the WB fixed gain mode
R-GAIN"◀" "▶"
000 - 255Used for operating the R gain in the WB fixed gain mode
■ USER2 "ⓔ"
FUNCTION OPTION DESCRIPTION
B-GAIN"◀" "▶"
000 - 255Used for operating the B gain in the WB fixed gain mode
R-GAIN"◀" "▶"
000 - 255Used for operating the R gain in the WB fixed gain mode
■ MANUAL "ⓔ"
FUNCTION OPTION DESCRIPTION
LEVEL"◀" "▶"
00 - 63Sets the B and R gain values for manual WB
22
◆ HLC/BLC
FUNCTION OPTION DESCRIPTION
HLC/BLC
OFF Off HLC and BLC
HLC Back light compensation
BLC High light compensation
■ HLC "ⓔ"
FUNCTION OPTION DESCRIPTION
CLIP LEVEL"◀" "▶"
0 - 255Sets HLC Mask threshold level
23
◆ WDR/ATR-EX
FUNCTION OPTION DESCRIPTION
WDR/ATR-EX
OFF Off WDR and ATR-EX
ATR-EX Sets ATR-EX Compensation
WDR Sets WDR Compensation
■ ATR-EX "ⓔ"
FUNCTION OPTION DESCRIPTION
CONTRAST"◀" "▶"
LOW, MID, HIGHSets the screen contrast in ATR-EX mode.
CLEAR FACE
"◀" "▶"
OFF,LOW, MID,
HIGH
Face emphasis function in ATR-EX mode.
■ WDR "ⓔ"
FUNCTION OPTION DESCRIPTION
CONTRAST"◀" "▶"
LOW, MID, HIGHSets the screen contrast in WDR mode.
CLEAR FACE
"◀" "▶"
OFF,LOW, MID,
HIGH
Face emphasis function in WDR mode.
24
◆ DNR■ "ⓔ"
FUNCTION OPTION DESCRIPTION
LEVEL"◀" "▶"
0 - 6Set the DNR (Digital Noise Reduction) strength.
25
◆ DAY/NIGHT
FUNCTION OPTION DESCRIPTION
DAY/NIGHT
AUTO Day or Night is determined automatically.
DAY Forced Day
NIGHT Forced Night
■ AUTO "ⓔ"
FUNCTION OPTION DESCRIPTION
BURST"◀" "▶"
OFF, ONSets the color burst in Night status to On or Off.
CNTL SIGNAL"◀" "▶"
INT, EXT1, EXT2Selects the method used to determine Day or Night.
DELAY CNT"◀" "▶"
0 - 255Sets the Night/Day identification transfer time
DAY→NIGHT"◀" "▶"
0 - 231
Sets the threshold for identifying the Night status from the
Day status.
NIGHT→DAY"◀" "▶"
24 - 255
Sets the threshold for identifying the Day status from the
Night status.
■ NIGHT "ⓔ"
FUNCTION OPTION DESCRIPTION
BURST"◀" "▶"
OFF, ONSets the color burst in Night status to On or Off.
26
◆ IR OPTIMIZERFUNCTION OPTION DESCRIPTION
IR OPTIMIZEROFF Off the IR Optimizer
ON Sets the IR Optimizer
■ ON "ⓔ"
FUNCTION OPTION DESCRIPTION
MODE"◀" "▶"
AUTO, CENTERSelects AE window type for IR Optimizer
IR AREA "ⓔ" Sets AE window area in Center mode.
LEVEL"◀" "▶"
0 - 12Sets AE servo speed for IR Optiimzer.
COLOR NIGHT"◀" "▶"
OFF, ONSets Color On or Off in Night mode
IR SHADE COMP"◀" "▶"
OFF, ONSets IR shading compensation in Night mode
◆ IR AREA■ "ⓔ"
FUNCTION OPTION DESCRIPTION
TOP"◀" "▶"
0 - 6
Sets the top side of the IR optimizer frame selected by the
AREA SEL parameter.
BOTTOM"◀" "▶"
0 - 6Sets the bottom side of the IR optimizer frame selected by
the AREA SEL parameter.
27
LEFT"◀" "▶"
0 - 8
Sets the left side of the IR optimizer frame selected by the
AREA SEL parameter.
RIGHT"◀" "▶"
0 - 8
Sets the right side of the IR optimizer frame selected by the
AREA SEL parameter.
WEIGHT"◀" "▶"
0 - 15Sets surrounding frame weight
◆ COLOR NIGHT■ "ⓔ"
FUNCTION OPTION DESCRIPTION
COLOR GAIN"◀" "▶"
LOW, MID, HIGHAdjusts the Color night mode function strength..
◆ IR SHADE COMP■ "ⓔ"
FUNCTION OPTION DESCRIPTION
PATTERN"◀" "▶"
SET1, SET2, SET3Selects the IR-SHD compensation gain level.
POSH"◀" "▶"
0 - 959Sets the IR-SHD horizontal center coordinate.
POSV"◀" "▶"
0 - 490Sets the IR-SHD vertical center coordinate.
LEVEL OFF,LOW,MID.HIGH Sets the intensity of the IR shading compensation.
28
◆ LENS SHD COMP
FUNCTION OPTION DESCRIPTION
LENS SHD
COMP
OFF Off the Lens shade compensation.
ON Sets the Lens shade compensation.
■ ON "ⓔ"
FUNCTION OPTION DESCRIPTION
PATTERN"◀" "▶"
SET1, SET2, SET3Selects the LENS-SHD compensation gain level.
POSH"◀" "▶"
0 - 959Sets the LENS-SHD horizontal center coordinate.
POSV"◀" "▶"
0 - 490Sets the LENS-SHD vertical center coordinate.
29
◆ DEFOG
FUNCTION OPTION DESCRIPTION
DEFOGOFF Off the defog function.
ON Sets the defog function.
■ ON "ⓔ"
FUNCTION OPTION DESCRIPTION
LEVEL"◀" "▶"
LOW, MID, HIGHSets the defog compensation strength.
30
◆ FLK LESS
FUNCTION OPTION DESCRIPTION
FLK LESS
OFF Off the FLK LESS function.
ON FLK LESS function forced On.
AUTO FLK LESS function auto mode.
■ ON "ⓔ"
FUNCTION OPTION DESCRIPTION
LEVEL
"◀" "▶"
GAIN CNTL,
SHUTTER FIX
Selects gain modulation on or flickerless shutter on
in FLK LESS On mode.
■ AUTO "ⓔ"
FUNCTION OPTION DESCRIPTION
LEVEL
"◀" "▶"
GAIN CNTL,
SHUTTER FIX
Selects gain modulation on or flickerless shutter on
in FLK LESS Auto mode.
31
◆ ANTI CR
FUNCTION OPTION DESCRIPTION
ANTI CR
OFF Off the ANTI-CR function.
ON the ANTI-CR function forced On.
AUTO the ANTI-CR function auto mode.
◆ PICT ADJUST■ "ⓔ"
FUNCTION OPTION DESCRIPTION
BRIGHTNESS"◀" "▶"
0 - 255Sets the screen brightness.
CONTRAST"◀" "▶"
0 - 63Sets the screen contrast
SHARPNESS"◀" "▶"
0 - 15Sets the screen sharpness
HUE"◀" "▶"
0 - 127Adjusts the hue
COLOR GAIN"◀" "▶"
0 - 255Adjusts the gain
32
◆ EZOOM
FUNCTION OPTION DESCRIPTION
EZOOM
OFF Off the digital-zoom function.
ON Sets the digital-zoom function.
■ ON "ⓔ"
FUNCTION OPTION DESCRIPTION
MAG"◀" "▶"
0 - 255Enlarge the screen with DIGITAL ZOOM.
PAN"◀" "▶"
0 - 1023Move the screen left and right in D-ZOOM setting
TILT"◀" "▶"
0 - 511Move the screen up and down in D-ZOOM setting
33
◆ PRIVACY MASK■ "ⓔ"
FUNCTION OPTION DESCRIPTION
AREA SEL"◀" "▶"
1/15 ~ 15/15Selects the privacy zone number to be adjusted.
DISPLAY"◀" "▶"
0FF, ONSet the selected privacy zone to ON or OFF.
POSITION "ⓔ" Sets the privacy mask position.
COLOR
"◀" "▶"
BLACK,RED,GREEN,
BLUE,YELLOW,CYA
N,MAGENTA,WHITE.
Sets the colors of the mask frames
TRANSP"◀" "▶"
0.00,0.50,0.75,1.00Sets the transparency ratio of the mask frames.
MOSAIC"◀" "▶"
OFF ONSets the mask frame mosaic to ON or OFF
◆ PRIVACY POSITION■ "ⓔ"
FUNCTION OPTION DESCRIPTION
POSITION "◀ ▶ ▲▼" Sets the mask frame selected by the AREA SEL parameter.
34
◆ MOTION DET
FUNCTION OPTION DESCRIPTION
MOTION DETOFF Off the motion-detection function.
ON Sets the motion-detection function.
■ ON "ⓔ"
FUNCTION OPTION DESCRIPTION
DETECT SENSE"◀" "▶"
0 ~ 127Sets the motion detection sensitivity.
INTERVAL"◀" "▶"
0 ~ 127Sets the motion detection interval time.
BLOCK DISP"◀" "▶"
OFF, ON
Controls the ON/OFF status of the motion detection block
display
MASK AREA "ⓔ" Sets the motion detection area
MONITOR AREA "ⓔ" Sets the Monitoring frame
◆ MOTION DET MASK AREA■ "ⓔ"
FUNCTION OPTION DESCRIPTION
MASK AREA"◀ ▶ ▲▼"
1 ~ 96Sets the mask position selected by the AREA SEL parameter.
35
◆ MONITOR AREA■ "ⓔ"
FUNCTION OPTION DESCRIPTION
AREA SEL"◀" "▶"
1/4 ~ 4/4Selects the monitor zone number to be adjusted.
AREA MODE"◀" "▶"
0FF, ONSets the selected monitor zone to ON or OFF.
TOP"◀" "▶"
0 ~ 15Sets the top coordinate of the monitor zone.
BOTTOM"◀" "▶"
0 ~ 15Sets the bottom coordinate of the monitor zone.
LEFT"◀" "▶"
0 ~ 23Sets the left coordinate of the monitor zone.
RIGHT"◀" "▶"
0 ~ 23Sets the right coordinate of the monitor zone.
36
◆ SYSTEM SETTING■ "ⓔ"
FUNCTION OPTION DESCRIPTION
SYNC MODE"◀" "▶"
INT, EXTThe current synchronization mode
LENS
"◀" "▶"
AUTO,
MANUAL
SHUTFIX + M IRIS , SHUT + M IRIS
SHUT
FLIP"◀" "▶"
OFF, V, H, HVSets the horizontal/vertical flip for display output
LCD/CRT"◀" "▶"
LCD, CRTSets the display output destination device type.
COMMUNICATION "ⓔ" Sets the COMMUNICATION
CAMERA ID"◀" "▶"
OFF, ONSets the camera id to ON or OFF.
◆ LENS■ "ⓔ"
FUNCTION OPTION DESCRIPTION
SPEED"◀" "▶"
0 ~ 255Sets the AE reference level.
37
◆ COMMUNICATION■ "ⓔ"
FUNCTION OPTION DESCRIPTION
PROTOCOL PELCO-D Displays the protocol type
ADDRESS"◀" "▶"
1 ~ 255Sets the camera id.
BAUDRATE
"◀" "▶"
2400, 4800, 9600,
19200, 38400, 57600,
115200
Sets the interface speed.
DATABIT 8BIT Displays the data size.
PARITY"◀" "▶"
OFF, ODD, EVENSets the parity bit check type.
STOPBIT 1BIT Displays the stop bit size.
◆ CAMERA IDFUNCTION OPTION DESCRIPTION
CAMERA IDOFF Off the camera id display.
ON Sets the camera id.
■ ON "ⓔ"
FUNCTION OPTION DESCRIPTION
CAMERA ID "◀ ▶ ▲▼ⓔ" Set the camera id name
38
◆ EXIT■ ON "ⓔ"
FUNCTION OPTION DESCRIPTION
SAVE "ⓔ" All the settings of the internal OSD menu are saved
NOT SAVE "ⓔ" All the settings of the internal OSD menu are not saved
CANCEL "ⓔ" All the internal OSD menu settings are canceled
BACK "ⓔ" back to the setup menu.
39
3. Packing Information
CO-42SN9EV
BAG CAP
CUSHION PANEL
(10 x 5 x 2)
LABEL
CARTON BOX
40
4. Reference Data Sheet
4-1. Spectral Sensitivity Characteristics
ICX662AK/ICX663AK
41
4-2. OLPF( Optical Low Pass Filter ) Specifications
OLPF Manufacturer : ZQCOT
4-2-1. OLPF for lens with Day&Night moving filter
4-2-2. OLPF for general lens
42
4-3. I/O Connector Specifications
43
5. UART Protocol
5-1. Connection◆ Data Communication : UART(+3.3V), Start-Stop Synchronized serial interface
◆ Data length : 8bit data
◆ Stop bit : 1 bit
◆ Parity : None
◆ Baudrate : 2400, 4800, 9600, 57600,11520 bps
5-2. Communication Protocol◆ All communication data consist of nine bytes.
◆ Communication Synch Byte with 0xFF.
◆ Communication Address with 0x00.
◆ The format of the communication data is shown below.
7 Byte Fixed
Byte1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7
Sync Byte Address Command1 Command2 Data1 Data2 Check sum
Data Byte Type Contents Remarks
Byte 1 Sync Byte 0xFF Data Packet Sync Byte
Byte 2 Address Camera Address 0 ID Address
Byte 3 Command1 Target Commnand1 Menu On/Iris Colse/Iris Open
Byte 4 Command2 Target Command2 Down/Up/Left/Right
Byte 5 DATA 1 Target DATA1 Pan Speed(N/A)
Byte 6 DATA 2 Target DATA2 Tilt Speed(N/A)
Byte 7 Check Sum Target Check Sum 2~6Byte Check Sum
5-3. Communication Command◆ Byte2 Address ID Menu(0~255) Set
◆Pelco-D
Data Byte Type Contents Remarks
Byte 1 Sync Byte 0xFF Data Packet Sync Byte
Byte 2 Address Camera Address 0~255 ID Address
Byte 3 Command1 Target Commnand1 Menu On/Iris Colse/Iris Open
Byte 4 Command2 Target Command2 Down/Up/Left/Right
Byte 5 DATA 1 Target DATA1 Pan Speed(N/A)
Byte 6 DATA 2 Target DATA2 Tilt Speed(N/A)
Byte 7 Check Sum Target Check Sum 2~6Byte Check Sum
44
◆ Byte2 Address ID Menu(0~255)Set
◆ Pelco-D OSD Control Command
NO Category Items Byte2 Byte3 Byte4 Byte5 Byte6 Byte7
1
Numerric Key
Enter Key
01 20 00 00 00 cs
01 03 00 00 00 cs
01 02 00 00 00 cs
01 00 03 00 5F cs
01 00 07 00 5F cs
01 02 00 00 5F cs
2 Up Key 01 00 08 00 00 cs
3 Down Key 01 00 10 00 00 cs
4 Left Key 01 00 04 00 00 cs
5 Right Key 01 00 02 00 00 cs
6 Enter Key01 60 00 00 00 cs
01 02 00 00 00 cs