CONTROL VISION Set-up
Step 3 Step 5
Step 4
Step 6
Step 9Step 8
Step 7
Step 10 Step 11
Step 12 Step 13
Step 14 Step 15
Step 16 Step 17
Close Administration completely
Step 18 Step 20
Step 19 Step 21
Verify click green
Step 23
Step 22
Click icon
Step 24
Step 25
Close Administration
Open Control Vision desktop icon
Step 26
Step 27
Select Configuration
Step 28 Step 29
Step 30
Select Devices input
Select icon
Select icon
Fill-in yellow space – device description
Select to verify
Full in address as per address in field device
Step 32
Step 31
Fill in NameFill in ProductFill in Access address
Step 33
Click to add more devices
Step 36 Step 37
Click for readings
Click for readings
Step 38
Step 39
Click for General measurements and alarms reading
Click for General meter reading
Step 40
Step 41
Click to view the event log of measurements
Click to view the event Graft
Step 42
Click for Instant reading of harmonics