Using SunRack,enjoying sunshine Using SunRack,enjoying sunshine
17 18
SUNRACK GROUNDMOUNTING SYSTEM
SUNRACK GROUND MOUNTING SYSTEM SUNRACK GROUND MOUNTING SYSTEM
SunRack solar ground mounting system currently offers four different types: concrete based, ground screw,pile, single pole solar mounting brackets, which can be installed on almost any kind ground and soil also on conversion sites.
SunRack solar ground mount designs allow large spans between racks of up to 5 m. Duringthe design stages,we focus on structural safety, utilizing structural analysis, and easier install consideration.
We design each ground mounting system according to the project demand. All systems areoptimised to meet the wind and snow loads and conditions at a location as well as the geological composition of the ground. Our systems are just as flexible as your requirements.
SUNRACK SOLAR GROUND MOUNTING SYSTEM
SFS-MG1 SFS-LC-03
SFS-FR-�� SunRack Flat Roof Triangular Mounting System Brief introduction
DescriptionPart Number
SFS-MG1
SFS-EG1
SFS-LC-03
SFS- ES-08
SFS Mid-Clamp Group
SFS End Clamp Group
SFS L-Connector group
SFS Expansion Screws 304 M8*70
SFS- TG2-30 SFS Triangular mounts Group SFS-EG1
SFS-TG2-30
Features1.Compatible for any module type2.Stable under extreme weather conditions3.Convenient to install with foldable triangular mounts4.Full aluminum structures with high quality
SunRack SFS-FR-03 triangular mounting system with a foldable design saves a lot on instalaltion and transporation.It can be installed directly on rooftop or ground or pre-made cement blocks as your option.All panels are suitableand easy&fast installation will gain a lot for your project.
Triangular Roof Bracket SpecificationInstallation Site
Panels
Structural materials
Survival wind speed
Design snow pressure
Applicable Temperature
Inclination
Component direction
Design Standards
Warranty
open ground and roof
Solar panel for any size
aluminum, stainless steel
32m / s
1.4KN / m2
-50 ° ~ 100 °
customizable
Portrait or Landscape
IBC&AS / NZS 1170
10 years on material
19 20
Using SunRack,enjoying sunshine Using SunRack,enjoying sunshineSUNRACK GROUND MOUNTING SYSTEM SUNRACK GROUND MOUNTING SYSTEM
Brief introduction
SFS-GM-��B SunRack Ground Mounting System
SFS-SM�-�� SFS Support Mounts Group Extruded Al����-T� Anodize
SFS-GM-01B SunRack concrete based ground mounts type B is best used in 3 lines,4 lines or above largelines solar ground mounts with very strong structure strength and highly competitive price.
1.Suitable for various kinds of ground condition2.Cost competitive with around 5m span between support mounts3.High quality and super appearance with full aluminum alloy structure and SS 304 bolts&nuts
Features
Ground PV Bracket SpecificationInstallation Site
Panels
Structural materials
Survival wind speed
Design snow pressure
Applicable Temperature
Inclination
Component direction
Design Standards
Warranty
open ground
Solar panel for any size
aluminum, stainless steel
42m / s
1.0KN / m2
-50 ° ~ 100 °
customizable
Horizontal
IBC&AS / NZS 1170
10 years on material SFS-SM5-15
SFS-GM-�� SunRack Concrete Based Ground Mounting Brief introduction
SFS-SM1-30
SFS-SM-�� SFS Support Mounts Group Extruded Al����-T� Anodize
SunRack Concrete Based ground mounts are a highly versatile ground mounted solutions that can bewidely applied in commercial and utility solar panel installation. With more than 40%preassembled and patented components, SunRack solar ground mounts save installer considerableamount of time and present you with great marketing edge.
1.Fast and Secure Installation2.Professional customized design3.10 years quality warranty and 25 years design life
Features
Installation Site open ground
Panels Solar panel for any size
Structural materials aluminum, stainless steel
Survival wind speed 60m / s
Design snow pressure 1.4KN / m2
Applicable Temperature -50 ° ~ 100 °
Component direction Portrait or Landscape
Inclination customizable
Design Standards IBC&AS / NZS 1170
Warranty 10 years on material
Concrete Based Ground Specification
21 22
Using SunRack,enjoying sunshine Using SunRack,enjoying sunshineSUNRACK GROUND MOUNTING SYSTEM SUNRACK GROUND MOUNTING SYSTEM
Brief introduction
Ground PV Bracket Specification
SFS-GM-��B SunRack Ground Screw Mounting System
SFS-SM�-�� SFS Support Mounts Group Extruded Al����-T� Anodize
SFS-SM5-15
SFS-GM-02B SunRack solar ground screws mounting type B is widely applied in 3 lines,4 lines or morelarge lines using ground screws to install solar panels in a quite quick and economic way.
1.Flexiblely on various soil conditions2.Cost competitive with around 5m span between support mounts3.Fit for any size or kind of solar panel(framed or frameless)
Features
Installation Site
Panels
Structural materials
Survival wind speed
Design snow pressure
Applicable Temperature
Inclination
Component direction
Design Standards
Warranty
open ground
Solar panel for any size
aluminum, stainless steel
42m / s
1.0KN / m2
-50 ° ~ 100 °
customizable
Horizontal
IBC&AS / NZS 1170
10 years on material
Sunforson has developed different series ground screws to meet varied application. This screw in foundation system is suitable for most kinds of soil condition. With unique design on the flange plate of ground screw and mounting feet, the mounting structures can be adjusted in a certain arrange if there is a little misplace for ground screw, not matter left or right, front and back and even up and down.
Brief introduction
Ground PV Bracket Specification
SFS-GM-�� SunRack Ground Screw Mounting System
SFS-SM�-�� SFS Support Mounts Group Extruded Al����-T� Anodize
SFS-SM3-30
1.Fast and quick installation with pile screws2.No destroy on the soil and the ground3.10 years quality warranty and 25 years design life
Features
Installation Site
Panels
Structural materials
Survival wind speed
Design snow pressure
Applicable Temperature
Inclination
Component direction
Design Standards
Warranty
open ground
Solar panel for any size
aluminum, stainless steel
60m / s
1.4KN / m2
-50 ° ~ 100 °
customizable
vertical
IBC&AS / NZS 1170
10 years on material
Using SunRack,enjoying sunshine Using SunRack,enjoying sunshine
23 24
SUNRACK GROUND MOUNTING SYSTEM SUNRACK GROUND MOUNTING SYSTEM
SFS-GM-�� SunRack Pile Ground Mounting System Brief introduction
1.Quick installation with pile machine2.Widely used for large commercial and utility Photovoltaic systems3.Comibined with Aluminum alloy and hot galvanized steel
Features
SunRack Pile Ground Mounting System is applied for large solar project panel installation on a non-sandyground.For SunRack Pile Ground Mounting System, the C post can be easily into the ground 1~2metersby Pile Machine, then you can mount the pre-assembled beam structure and other mounts easily.
Installation Site
Installation Angle
Wind Load
Snow Load
PV Modules
Module Orientation
Module Width
Standard
Support Rail
Color
Warranty
Open air
0° to 60°
42m/s
1.4KN/m2
Framed
vertical
Any
international standards
Extruded aluminum and Q235
Natural
10 years on material
SFS-GM-�� SunRack Ground Mounting System Brief introduction
Ground Mounting Specification
SFS-SM�-�� SFS Support Mounts Group Q���SFS-SM4-3o
Part Number
SFS-EG5
SFS-ES-10
SFS-SR5
SFS-SC-05
SFS-MG5
SFS End Clamp Group Extruded Al6005-T5 Anodize
SFS Expansion Screws 304 M10*100
SFS SunRack Rail V Q235
SFS Splice Connector Q235
SFS Mid-Clamp Group Extruded Al6005-T5 Anodize
Description
SFS-ES-10SFS-SR5 SFS-SC-05 SFS-MG5 SFS-EG5
SunRack solar ground mounting system type SFS-GM-03 is made of galvanized steel, which can be usedwith both concrete foundation and ground screw in different panel array in a variety of conditions.With galvanized steel structure, this ground type has huge market edge.
1.Hot galvanized steel Q2352.Suitable for most kinds grounds with concrete base3.Easy andfast installtion with unique design
Features
Installation Site
Components
Structural materials
Survival wind speed
Design snow pressure
Applicable Temperature
Inclination
Component direction
Design Standards
Warranty
open ground
battery components for any size
carbon steel,Q235
45m / s
1.4KN / m2
-50 ° ~ 100 °
customizable
vertical
AS / NZS 1170
5 years on material
Pile Ground PV Bracket Specification
SunRack ground screws with flange plate and ground screws without flange plate are widely used in ground solar mounting system.Ground screw system is a modern foundation system,using the drilling machine to install which makes it as the most efficient and cost-saving footing solution.It can be widely applied to different soil conditions such as loose soil, bedrock, sandy land and swamp etc.
Using SunRack,enjoying sunshine Using SunRack,enjoying sunshineSUNRACK GROUND MOUNTING SYSTEM SUNRACK GROUND MOUNTING SYSTEM
25 26
SFS-PM-X SunsRack Pole Mounting System Brief introduction
Single Pole Specification
SFS-MB-01
Installation Site
Installation Angle
Building Height
Wind Load
Snow Load
PV Modules
Module Orientation
Module Width
Standard
Support Rail
Color
Warranty
Open air
0° to 60°
1m
42m/s
1.4KN/m2
Framed or Frameless panel
Horizontal or vertical
Any
international standards
Extruded aluminum and Q235
Natural
5 years on material
Sunforson specializes in Top Pole Solar Panel Mounting manufacturing and a variety of designs forpole mounting systems to meet the needs of any type of solar panel post mount installation. SunRacksingle post mount enable you to install 1-16 solar panels in different panel layout.
Material: Hot dip galvanized steel Q���
Ground ScrewBrief introduction
Part Number Description(with flange plate)
SFS-GS2-1200 1200mm length ground screw
SFS-GS2-1600 1600mm length ground screw
SFS-GS2-1800 1800mm length ground screw
SFS-GS2-2000 2000mm length ground screw
SFS-GS2-X Any customized length ground screw
Part Number Description(with flange plate)
SFS-GS1-1200 1200mm length ground screw
SFS-GS1-1600 1600mm length ground screw
SFS-GS1-1800 1800mm length ground screw
SFS-GS1-2000 2000mm length ground screw
SFS-GS1-X Any customized length ground screw
Diameter
76mm
Features1,Post Cap adjustable according to the geographical location demand2,1~16 panels can be supported by the pole in a strong and secure way3.Best used in solar pump, home solar system and other open ground solar project
SFS Main Beam Group Q��� Hot Galvanizing
Material Thickness
Hot-Galvanize 3.0~4.0mm
Diameter
76mm
Material Thickness
Hot-Galvanize 3.0~4.0mmSPS-MB-02 SFS-MB-06
Using SunRack,enjoying sunshine Using SunRack,enjoying sunshine
27 28
SUNRACK SOLARCARPORT MOUNT SYSTEM
SUNRACK SOLAR GROUND MOUNT SYSTEM SUNRACK SOLAR CARPORT MOUNT SYSTEM
Sunforson customizable Aluminum solar carport mounting system is the most versatile solar carport solutionon in the market offering several different designed structure options for both single and double rows of parking.They are suitable for both framed and thin film modules in any size.
Whether you want carports mounting for home use,commercial use or utility,Sunforson can design suitable carport mounting structures accordingly to site situation.
To accommodate any installation site situation,customized foundation options are available with the use of concrete foundation,which is placed above the ground or buried into the ground by your option.
Sunforson Carport Mounting Structures
Ground Screw
Part Number Description(with flange plate)
SFS-GS3-1200 1200mm length ground screw
SFS-GS3-1600 1600mm length ground screw
SFS-GS3-1800 1800mm length ground screw
SFS-GS3-2000 2000mm length ground screw
SFS-GS3-X Any customized length ground screw
Part Number Description(with flange plate)
SFS-GS4-1200 1200mm length ground screw
SFS-GS4-1600 1600mm length ground screw
SFS-GS4-1800 1800mm length ground screw
SFS-GS4-2000 2000mm length ground screw
SFS-GS4-X Any customized length ground screw
Diameter
76mm
Material Thickness
Hot-Galvanize 3.0~4.0mm
Diameter
76mm
Material Thickness
Hot-Galvanize 3.0~4.0mm
Brief Introduction