Bobbin
Round metal spool which holds the bottom
thread.
Bobbin Case
Holds the bobbin and regulates bottom tension
Needle Stitch Plate
The place where seam
allowance guides
are located.
Feed Dogs
Teeth that
move the
fabric through
the machine.
Presser Foot
Holds the fabric in
place while you
sew.
Presser Foot Lifter
Raises and
lowers the
presser foot.
Needle
Carries the
thread and
pierces the
fabric.
Needle Clamp
Holds the needle in
place.
Reverse Button
Creates backstitching to keep
seams from
coming apart.
Needle Stop Up/Down
Makes it so that the needle stops in
the desired position.
½ Speed Button
Allows the machine to sew at half
of the normal speed
Thread Take Up Lever
Pulls thread
from the spool.
Bobbin Pretension
Provides tension on the thread
while winding a bobbin.
Upper Thread Tension
Controls the
tightness on the thread.
Screen
Displays information
about sewing
machine settings
Stitch Length Buttons
Sets the length of stitches.
#17
Needle Position Buttons
Changes needle position from left to center to right.
Stitch Width Buttons
Sets the width of zigzag
and pattern stitches.
#19
Spool Pin
Holds the top spool
of thread.
#20
Bobbin Winder
Holds the bobbin while
winding.
#23
Handwheel
Can be turned
TOWARD YOU to
raise and lower the needle.
#24
Stitch Selection Buttons
Changes the
pattern of the stitch
#25
Power Switch
Turns the sewing
machine on or off.
Foot Pedal
Controls the
speed at which
the fabric moves through
the machine
1.1. Thread Thread TensionTension
2.2. Bobbin Bobbin WinderWinder
3.3. Thread Take Thread Take Up LeverUp Lever
4.4. Hand WheelHand Wheel5.5. Needle Needle
PositionPosition6.6. Stitch Width Stitch Width
ButtonsButtons7.7. Stitch Stitch
Length Length ButtonsButtons
8.8. Reverse Reverse StitchStitch
9.9. Bobbin AreaBobbin Area10.10. Stitch PlateStitch Plate11.11. Feed DogsFeed Dogs12.12. Stitch Stitch
Selection Selection ButtonsButtons
13.13. Spool PinSpool Pin
14. Presser foot14. Presser foot15. Needle Clamp15. Needle Clamp16. Seam 16. Seam
Allowance Allowance guidesguidesA.A. 5/8” 5/8” Marked on the Marked on the back of the back of the stitch platestitch plateB.B. ¼” ¼” Edge of Presser Edge of Presser FootFootC.C. 1/8” 1/8” Inside corner on Inside corner on Presser footPresser footD. 1”D. 1”End of Stitch End of Stitch plate plate
**You will need to **You will need to individually individually show me where show me where the bobbin case the bobbin case is and where is and where the foot pedal the foot pedal is.is.
Hint: Each line on the seam allowance guide is 1/8”
Whenever you sew a permanent seam, you Whenever you sew a permanent seam, you need to secure your seamneed to secure your seam
Backstitching is the most common way to Backstitching is the most common way to secure your seam, so that your project won’t secure your seam, so that your project won’t fall apartfall apart
Reverse Stitch
Button!!
Press the Reverse
button at the
beginning and end of each seam