Download - Biomass Energy Conversion Techniques
-
7/28/2019 Biomass Energy Conversion Techniques
1/12
1. Biomass:- What is it?
Biomass is a natural product of Solar energy and a renewable source of carbon and hydrogen
which are basic constituents of energy and chemical products. The term bomass include all
plant life-trees, agricultural plants, bush grass etcand organic waste.
1.1 Biomass Energy Conversion Techniques:
The energy content in the biomass can be extracted by various methods. The selection of the
technology would depend on evarious factors such as Type of Biomass, End Use, Energy
content, Location( Urban/Rural) etc The below table shows various methods availble for
energy conversion-
-
7/28/2019 Biomass Energy Conversion Techniques
2/12
1.3 Classification of Technologies1.3.1 Direct Method
In this type technology the fuel will be directly burned to produce energy.
Different types of direct Methods are:
a. Incerination/ Combustion Mass Burning of Biomass in presence of excess air Similar to Conventional Fossil Power plants Conversion Biomass to electricity Used for thermal and electricity applications Old technology and is not widely practiced today due to production of Harmful gases.b. Combined Heat and Power
Used in Cogeneration cylces where thermal and electrical power is required. Improves Thermal Power Plant Efficiency Suitable for sugar industry
c. Biofuels Liquid biofuels include pure plant oil, biodiesel, and bioethanol. Biodiesel is based on esterification of plant oils. Ethanol is primarily derived from sugar,
maize, and other starchy crops.
Several processes exist to convert feedstocks and raw materials into biofuels. First-generation biofuels refer to the fuels that are produced through well-known processes
such as cold pressing/ extraction, transesterification, hydrolysis and fermentation, andchemical synthesis. The resultingfuels have been derived from sources such as starch,
sugar, animal fats, and vegetable oil
Second-generation biofuels are produced through more advanced processes, includinghydro treatment, advanced hydrolysis and fermentation, and gasification and synthesis.
They are in Research stage.
Can be used for Transportation segment. Reduces the dependence on fossil fuels forVehicles.
Requires large amount of land for the commercial production of Biofuel. Farmers may be attracted to cultivation of biofuels thus affecting the cultivation of
edible crops.
-
7/28/2019 Biomass Energy Conversion Techniques
3/12
d. Cooking and Related Applications
Biomass densification or briquetting. This is the process of compacting loosebiomass feedstocks into a uniform dense form, producing a higher quality fuel.
reduced emissions,and greater control for residential and industrial applications.
Briquettes offereasier transport, storage, and mechanical handling in both household
andindustrial settings.
Stalks, husks, bark, straw, shells, pits, seeds, sawdustvirtually any solid organic byproduct of agricultural or silvicultural harvestingcan be used as a
feedstock.
-
7/28/2019 Biomass Energy Conversion Techniques
4/12
Biomass wastes with relatively low moisture content (less than 15%) are most suitable
for efficient production of briquettes.
Ethanol gel. Ethanol gel is a clean-burning fuel that consists of gelatinized ethanol boundin a cellulose thickening agent and water
1.3.2 Indirect Methoda. Gasification
Conversion of Biomass to Synthesis Gas, which can be used for power generation Incomplete Oxidation of Biomass which produces carbonmonoxide, hydrogen,
Methane and other hydrocarbons
Better than Incerination as harmful gases produced is less. Syngas can be used to run IC engine, fuel for Boiler, Energy produced can be stored in form of ethanol, gas, etc..
b. Anaerobic Digestion Fermentation of bio degradable subjects Suitable for household wastes Biogas produced can be used locally for house hold cooking purposes. Large numbers of small scale Biogas Digesters have been used throughout many
developing countries.
c.
Biorefineries
A biorefinery involves the co-production of a spectrum of bio-based products (food, feed,materials, chemicals) and energy(fuels, power, heat) from biomass .
A biorefinery is a facility that integrates biomass conversion processes and equipment toproduce fuels, power, and value-added chemicals from biomass.
Analogous to petroleum refinery.
-
7/28/2019 Biomass Energy Conversion Techniques
5/12
d. Biochar Biochar is a fine-grained charcoal high in organic carbon and largely resistant to
decomposition.Biochar is produced by heating biomass in the absence (or under reduction)
of air, or pyrolysis. Low-cost, small-scale bio char production units can produce biochar to build garden,
agricultural, and forest productivity, and bioenergy for eating, cooking.
1.4 Prospective Projects:-
Small scale biogas plants can be installed in rural houses which can be used as cookinggas
Biomass gasification plants can be used for rural electrification- Decentralized powergeneration
Large scale cultivation of biofuel plants in waste land. Biofuels can replace fossil fuels fortransportation
Co generation using biomass should be made mandatory in industries to improve plantefficiency.
Agricultural wastes should used for power generation thereby improving the earnings offarmers.
-
7/28/2019 Biomass Energy Conversion Techniques
6/12
2. Waste to Energy Systems
2.1 Potiential of Waste to Energy Systems in India- Overview
About 115000 tons of solid waste is generated per day in the country. This figure couldbe twice as much by 2020.
Municipal solid waste is a potential source for recyclable and inert materials and canproduce value added products, in addition to energy recovery.
Business opportunities in waste to energy exist in all three stages of waste to energyWaste Transportation, Waste Management Facilities, and Waste Processing for Energy
Recovery.
Indian government actively encourages private sector participation in MSW value chainthrough a variety of business and operational models.
Currently, biomethanation and incineration are the most prevalent and maturetechnologies for MSW to energy in India. Gasification and pyrolysis are the emerging
technologies.
Inadequate segregation at source, sub-optimal regulations and incentives, inadequatetreatment facilities and immature technologies are some of the key challenges in this
sector.
Key success factors in waste to energy include optimal technology, efficient operations,focus on costs, and emphasis on environmental protection.
2.2 Waste to Energy Conversion Technologies
The most significant WTE technologies are based on biological or thermal methods. It is
essential that technologies identified, based on evaluation criteria consisting of technical,
commercial and environmental aspects, are employed for the WTE projects.
2.2.1 Basic Techniques of Energy Recovery from Waste
Energy can be recovered from the organic fraction of waste (biodegradable as well as non-biodegradable) through thermal, thermo-chemical and biochemical methods.
A brief description of the commonly applied technologies for energy generation from waste is as
follows
a. Anaerobic Digestion/Biomethanation
-
7/28/2019 Biomass Energy Conversion Techniques
7/12
In this process, the organic fraction of the waste is segregated and fed into a closed container
(biogas digester). In the digester, the segregated waste undergoes biodegradation in presence
of methanogenic bacteria and under anaerobic conditions, producing methane-rich biogas and
effluent. The biogas can be used either for cooking/heating applications, or for generating
motive power or electricity through dual-fuel or gas engines, low-pressure gas turbines, or
steam turbines. The sludge from anaerobic digestion, after stabilization, can be used as a soilconditioner. It can even be sold as manure depending upon its composition, which is
determined mainly by the composition of the input waste.
b. Combustion/IncinerationIn this process, wastes are directly burned in presence of excess air (oxygen) at high
temperatures (about 800C), liberating heat energy, inert gases, and ash. Combustion results in
transfer of 65%80% of heat content of the organic matter to hot air, steam, and hot water.
The steam generated, in turn, can be used in steam turbines to generate power.
c. Pyrolysis/GasificationPyrolysis is a process of chemical decomposition of organic matter brought about by heat. In
this process, the organic material is heated in absence of air until the molecules thermally break
down to become a gas comprising smaller molecules (known collectively as syngas).
Gasification can also take place as a result of partial combustion of organic matter in presence
of a restricted quantity of oxygen or air. The gas so produced is known as producer gas. The
gases produced by pyrolysis mainly comprise carbon monoxide (25%), hydrogen and
hydrocarbons (15%), and carbon dioxide and nitrogen (60%). The next step is to clean the
syngas or producer gas. Thereafter, the gas is burned in internal combustion (IC) enginegenerator sets or turbines to produce electricity.
d. Landfill Gas recoveryThe waste dumped in a landfill becomes subjected, over a period of time, to anaerobic
conditions. As a result, its organic fraction slowly volatilizes and decomposes, leading to
production of landfill gas, which contains a high percentage of methane (about 50%). It can
be used as a source of energy either for direct heating/cooking applications or to generate
power through IC engines or turbines.
-
7/28/2019 Biomass Energy Conversion Techniques
8/12
2.2.1 MSW to energy Systems-Overview
-
7/28/2019 Biomass Energy Conversion Techniques
9/12
2.2.1.1 Comparison of various methods
-
7/28/2019 Biomass Energy Conversion Techniques
10/12
2.3 Industrial Waste to Energy
The technologies, identified for conversion of different types of industrial waste in to energy are
given as:1 Liquids Biomethanation
2 Solids Gasification/Pyrolysis, Incineration/Combustion
3 Semi-solids Biomethanation, Gasification/Pyrolysis,Incineration/Combustion
Source: Technical Memorandum on Waste-to-Energy Technologies, February 2003
Methods to Convert Non Hazardous Waste to Energy
Industries Prominent Wastes Generated Treatment Option Application
Sugar Mills Sugar bagasses Combustion andGasification
Heat and Power
Pressmud Composting Fertilizer
Sugar molasses Fermentation Ethanol synthesis
Fermentative Yeast biomass Biomethanation Biogas production &
digestate
Slaughter houses Organs, Tissues, Blood, Hides,
Animal excreta and Carcass etc
Biomethanation Biogas production &
digestate
Paper mills Pulp Biomethanation Biogas production &
digestate
Paper shavings Combustion Heat and power
Wood wastes and Paper boards Combustion and
gasification
Heat and power
Dairy Plants Whey and Milk cream Biomethanation Biogas production &digestate
Sago factories Starch materials and peels Biomethanation Biogas production &
digestate
-
7/28/2019 Biomass Energy Conversion Techniques
11/12
Tanneries Hides and skins Acid treatments
and
biomethanation
Biogas production &
digestate
Animal Husbandries Animal excreta and body fluids Biomethanation Biogas production &
digestate
Fruits and vegetable
processing units
Pulp wastes Biomethanation Biogas production &
digestate
Analysis of Key Aspects of Waste to Energy Technologies
Criteria Incineration Anaerobic Digestion Gasification/Pyrolysis
A Feedstock
Industrial
Liquid Not suitable Suitable Not suitable
Solid Suitable Not suitable Suitable
Urban
Liquid Not suitable Suitable Not suitable
Solid Suitable Suitable Suitable
Farm
Poultry Suitable Suitable Suitable
Cattle Suitable Suitable Suitable
B Technology features
Technology status
Industrial Proven Proven Emerging
Urban Proven Proven Emerging
Farm Proven Proven Proven
Energy efficiency 85-90% (Based on
calorific value)
50-60% (Based on
volatiles)
90-95% (Based on
calorific value)
C Operating conditionsSystem
configuration
Complex Simple Complex
Process Flexibility Low Good Low
Modular Yes Yes Yes
D Capital, O & M costs
-
7/28/2019 Biomass Energy Conversion Techniques
12/12
Relative capital
cost
Very high Medium-high Very High
O & M High Low Limited
Commercial
viability
Less viable than others
owing to costlydownstream air
pollution control
Readily viable Varies considerably
Captive power
requirements
Significant (25-30%) Low (5%) Variable (5-20%)
Area requirements Elaborate Compact Compact
E Environmental
impacts
Can be minimized, but
requires expensive
technology
investments
Minimum Can be controlled to a
significant extent
F Socio-economic impacts
Public
acceptability
Not fully satisfactory Satisfactory Satisfactory
Waste disposal Complete, except for
ash to landfill.
Complete except for
sludge stabilization
Complete, except for
ash