AXA-DALI P20 The AXA-DALI P20 is a dimmer module made to dim DALI compatible ballasts &
drivers. Lights can be switched on and off with the simple press of the knob and
can be dimmed up and down by rotating the knob. The unit operates in DALI
broadcast mode so no complicated addressing of fixtures is required. The unit
features a built in DALI power supply and can also directly integrate with any
motion sensor with a 240v output.
Although the unit is configured to function straight out of the box, additional
functionality can be accessed by holding down the knob to enter programming
mode. Functions such as minimum level, sensor mode and sensor run on time can
all be adjusted while in programming mode.
Smartscape Automation Ph: 07 3357 1922 [email protected] ww.ssqld.com.au
Technical Specifications
Power Supply 220-240VAC 50HZ
No. DALI Ballasts 20
DALI Mode Broadcast
Dimming Range 1-100% **
Switch on Level 100% or go to previous level
Sensor Mode Manual or Auto on, Auto off
Sensor additional run on time 0, 15, 30 or 60 minutes
Finish Standard white, other finishes available on request
Standards AS/NZS 60335.1:2011(IEC 60335-1 Ed. 5 MOD) including Amendment 1, Including AU variations.
** Does not indicate actual dimming performance of light fitting. Actual technical specifications subject to change without notice.
KEY FEATURES:
No programming required, basic functionality achieved straight out of the box
No extra components or separate power supplies are required
Can be integrated to any 240v motion sensor and can be configured for advanced functionality
Standard Australian switch size to fit standard wall box or bracket
Custom finishes and functionality available on request