![Page 1: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/1.jpg)
By Deligence Technologies www.deligence.com
Attendance system using MYSQL with Raspberry pi and RFID-RC522
![Page 2: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/2.jpg)
WHAT WE WILL COVER?Project Description
Software Used
Hardware Used
Raspberry Pi 3 Pin Block Diagram
Brief Description of Raspberry Pi
Node MCU V3 and Its Circuit Diagram
Node MCU Code
Database Python Script Code
Video Presentation
![Page 3: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/3.jpg)
Project Description Attendance system using MYSQL with Raspberry pi and RFID-RC522:
In this project we are taking data from RFID reader which is connected to Node MCU V3 and saving it to PHPMYADMIN database running on Raspberry pi.
![Page 4: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/4.jpg)
Software Used
Raspbian OSArduino IDEMy SQL Database
![Page 5: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/5.jpg)
Hardware Used
Raspberry piNode MCU V3 RFID Reader with TagJumper Wire
![Page 6: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/6.jpg)
Raspberry Pi 3 Pin Block Diagram
![Page 7: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/7.jpg)
Brief Description of Raspberry Pi
This is the latest version of raspberry pi. In this we have inbuilt Bluetooth and wi-fi, unlike previously we have to use Wi-Fi dongle in one of its usb port. There are total 40 pins in RPI3. Of the 40 pins, 26 are GPIO pins and the others are power or ground pins (plus two ID EEPROM pins.)
There are 4 USB Port and 1 Ethernet slot, one HDMI port, 1 audio output port and 1 micro usb port and also many other things you can see the diagram on right side. And also we have one micro sd card slot wherein we have to installed the recommended Operating system on micro sd card.
There are two ways to interact with your raspberry pi. Either you can interact directly through HDMI port by connecting HDMI to VGA cable, and keyboard and mouse or else you can interact from any system through SSH(Secure Shell). (For example in windows you can interact from putty ssh.)
![Page 8: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/8.jpg)
Node MCU V3NodeMCU is an open source IOT platform. It includes firmware which runs on the ESP8266 Wi- Fi SoC from hardware which is based on the ESP-12 module. The term "NodeMCU" by default refers to the firmware rather than the dev kits. Circuit Diagram
![Page 9: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/9.jpg)
Node MCU Code#include <RFID.h>Include the standard Arduino SPI library */#include <SPI.h>/* Include the RFID library */#include <RFID.h>
/* Define the DIO used for the SDA (SS) and RST (reset) pins. */#define SDA_DIO 10#define RESET_DIO 9/* Create an instance of the RFID library */RFID RC522(SDA_DIO, RESET_DIO);
void setup(){ Serial.begin(9600); /* Enable the SPI interface */ SPI.begin(); /* Initialise the RFID reader */ RC522.init();} Continue---
![Page 10: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/10.jpg)
void loop(){ /* Has a card been detected? */ if (RC522.isCard()) { /* If so then get its serial number */ RC522.readCardSerial(); Serial.print("Card detected:"); Serial.print(" "); for(int i=0;i<5;i++) { Serial.print(RC522.serNum[i],DEC); //Serial.print(RC522.serNum[i],HEX); //to print card detail in Hexa Decimal format } Serial.print(" ");
Serial.print("RFID NAME SERIES: "); Serial.print(" "); Serial.print(522); Serial.println(" "); } delay(2000);}
![Page 11: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/11.jpg)
Database Python Script Code#!/usr/bin/pythonimport serialimport timeimport MySQLdb#establish connection to MYSQL.dbConn=MySQLdb.connect("localhost","root","DB_Password","DB_Name") or die ("could not connect to database")#open a cursor to the databasedevice="""/dev/ttyACM0"""try: print "Trying...",device arduino=serial.Serial(device,9600)except: print"Failed to connect on",devicewhile True: time.sleep(1) Continue -----
![Page 12: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/12.jpg)
try: data=arduino.readline() #read data from arduino print data pieces=data.split(" ") #split data by tab try: cursor=dbConn.cursor() cursor.execute("""INSERT INTO DB_Table_Name VALUES(NULL,%s,%s)""",(pieces[1],pieces[3])) dbConn.commit() #commit the insert cursor.close() #close the cursor except MYSQLdb.IntegrityError: print"failed to insert data" finally: cursor.close() # close in case it failed except: print"Processing!"
![Page 14: Attendance system using MYSQL with Raspberry pi and RFID-RC522](https://reader036.vdocuments.mx/reader036/viewer/2022081417/58f21a4b1a28ab333b8b456d/html5/thumbnails/14.jpg)