Download - A ND INDEX - PennEngineering
P R O D U C T G U I D E
A N D I N D E X
T O B U L L E T I N S
PEM fasteners provide strong, quality threadsin metal and P.C. boards too thin to be tapped.PEM fasteners are easily installed byinserting them into punched or drilledholes and applying parallel squeezingforces. In ductile materials, as the installationforce is applied, part of the sheet cold flows into an undercut beneath thehead thereby making the fastener an integral part of the sheet. A serratedclinching ring prevents the fastener from rotating once installed.
PEM brand broaching fasteners for printed circuit boards and non-ductile materials are pressed into drilled mounting holes and heldpermanently in place by an interference fit. Both self-clinching andbroaching designs withstand substantial pushout and torque-out forces.
PEM Fastening Systems also offers weld nuts. PEM weld nuts are roundthereby eliminating indexing, and have pilot shanks so that they are self-locating in panel holes and protect threads from weld splatter.
PEM brand fasteners are available in many variations as indicated on thefollowing pages. Selections of threaded fasteners include free-running,self-locking, floating, and blind hole types meeting Unified, ISO, andMIL standards. They are available in carbon steel, stainless steel, andaluminum.
Also available is hardware for special industry applications such asCONNECT’R WARE® fasteners for connector mounting, AUTOSPEC®
fasteners for automotive applications, and SI® brand inserts for plastics.Our new STICKSCREW® system offers manufacturers an extremely fast,accurate and efficient method of small screw insertion.
PEMSERTER presses are designed to safely, reliably, accurately, andquickly install PEM fasteners. When using PEMSERTER presses toinstall PEM fasteners the entire fastener installation process isstreamlined. No matter how complex or simple an installation challengemay be, using the PEM fastener and PEMSERTER press system willprovide you with quality results.
PEM Fastening Systems has been manufacturing these quality fastenerssince 1942. Today, PEM self-clinching fasteners are used throughout theworld by manufacturers of electronic, communications, aerospace, andautomotive equipment.
PEM® fasteners and PEMSERTER® presses are briefly described on thefollowing pages. Complete data and samples are available for specificfasteners on request.
PG-2
PEM® FASTENERS ANDPEMSERTER® PRESSES
TRADEMARKS
To help you identify genuine PEM® brand fasteners,most are marked by one of our registeredtrademarks – “PEM” or “one and two groove”trademark on internally threaded fasteners and a“recessed dimple” on the ends of studs. To be sureyou are getting genuine PEM® brand fasteners lookfor the PEM® Trademarks.
Two grooves on nuts.
“PEM” stampon top of nuts.
One groovefor PEM 300®
nuts.
Double squaresfor floating nuts.
The bulletin designation and date can be found at the bottom right of eachproduct bulletin. Fastener bulletins appear alphabetically in the catalog bybulletin designation. Information on PEMSERTER® fastener installationpresses can be found on pages 7 and 8 of this product guide.
F 200
Bulletin Designation
Year
Month
Two grooveson standoffs.
Dimple onstuds.
Example:
The color bluefor nylonlockingelements.
©Copyright 1998 PEM Fastening Systems, a PennEngineering company.PEM is a brand name and a registered trademark for fastenersmanufactured exclusively by PEM Fastening Systems.
PG-3
SELF-CLINCHING FASTENER INSTALLATION DO’S AND DON’TS
“Do’s”
provide mounting hole of specified size for each fastener.
make certain that shank (or pilot) is within hole before applying installation force.
apply squeezing force between parallel surfaces.
apply sufficient force to totally embed clinching ring around entire circumference and to bring shoulder squarely in contactwith sheet. For some fasteners, installation will be complete when the head is flush with the panel surface.
“Don’ts”
install steel or stainless steel fasteners in aluminum panels before anodizing or finishing.
deburr mounting holes on either side of sheet before installing fasteners – deburring will remove metal required forclinching fastener into sheet.
install fastener closer to edge of sheet than minimum edge distance indicated by manufacturer – unless a special fixture isused to restrict bulging of sheet edge.
over-squeeze. It will crush the head, distort threads and buckle the sheet. Be certain to determine optimum installationforce by test prior to production runs.
attempt to insert fastener with a hammer blow – under any circumstances. A hammer blow won’t permit the sheet metal toflow and develop an interlock with the fastener’s contour.
install screw in the head side of fastener. Install from opposite side so that the fastener load is toward sheet. The clinchingforce is designed only to hold the fastener during handling and to resist torque during assembly.
install fastener on pre-painted side of panel.
the PEM Dynamic Product Locator
complete catalog literature PDF files
2D/3D drawing files in IGES, Pro/E and DXF formats
general design tools
new product announcements
tech help center
tradeshow calendar
rep and distributor listing And much More...
www.pemnet.comNEED MORE INFORMATION ?
Visit our website, where we provide instant access to...
PG-4
FLOATING FASTENERS (Bulletin ALA)GENERAL INFORMATION
Floating action compensates for matinghole misalignment. Thread sizes #4 to1/4” and M3 to M6.
TYPES
AS, AC
BLIND FASTENERS (Bulletin B)GENERAL INFORMATION
Used for applications requiring closedthread ends. Blind end limits screwpenetration and excludes foreign matter.Thread sizes #4 to 1/4” and M3 to M6.
TYPES
B, BS
CONCEALED-HEAD STUDS (Bulletin CH)GENERAL INFORMATION
Installed into a blind milled hole wheresurface opposite stud must remainunmarred. Thread sizes #4 to #10 andM3 to M5.
TYPES
CHC, CHA,CFHC,CFHA
CONCEALED-HEAD STANDOFFS (Bulletin CH)GENERAL INFORMATION
Installed into a blind milled hole wheresurface opposite standoff must remainunmarred. Thread sizes #4 to 1/4” andM3 to M6.
TYPES
CSS,CSOS
SELF-CLINCHING NUTS (Bulletin CL)GENERAL INFORMATION
Strong internal threads in sheets as thinas .030” / 0.8 mm. Thread sizes #2 to1/2” and M2 to M10.
TYPES
S, SS, H,HN, HNL,
CLS,CLSS,CLA
CONNECT’R WARE® FASTENERS (Bulletin CW)GENERAL INFORMATION
These self-clinching, screwlockstandoffs are used primarily to mountD-sub connectors to panels.
TYPES
DSO, DSOS
FLOATING SELF-LOCKING FASTENERS (Bulletin ALA)GENERAL INFORMATION
Floating action with locking threadscompensates for mating holemisalignment. Thread sizes #4 to 1/4”and M3 to M6.
TYPES
LAS, LAC
NUTS FOR STAINLESS STEEL SHEETS (Bulletin CL)GENERAL INFORMATION
Installs into stainless steel sheets asthin as .030” / 0.8 mm. Thread sizes #4to 1/4” and M3 to M6.
TYPES
SP
CONNECT’R WARE® FASTENERS (Bulletin CW)GENERAL INFORMATION
These self-clinching, self-locking, flare-mounted clinch nuts are for use inconnectors such as D-subs, where aprevailing torque, non-metallic lockingfeature is required.
TYPES
CFN
TRI-DENT® SELF-CLINCHING LOCKNUTS (Bulletin CL)GENERAL INFORMATION
These locknuts are designed with aunique and economical TRI-DENT®
locking feature, which meetsdemanding locking performancerequirements.
TYPES
SL
THIN SHEET SELF-CLINCHING NUTS (Bulletin CL)GENERAL INFORMATION
These nuts feature a lower profile andcan be mounted closer to the edge of asheet than standard self-clinching nuts.
TYPES
SMPS
If you need information on Seeany of these PEM products Bulletin
AS, AC, LAS, LAC ALAB, BS BCFHA, CFHC, CHA, CHC, CSOS, CSS CHS, SS, CLS, CLSS, SP, CLA, SL, SMPS, H, HN, HNL CLDSOS, SLPS, CFN CWF FFEO, FE, UL, FEOX, FEX, U FEFH, FHS, FHA, HFH, HFHB, HFHS, HFE, HFEDTFH, TFHS, FH4, TPS, FHL, FHLS FH
KF2, KFS2, KFE, KFSE, PFK,KFH, KSSB, SOSG, SOAG, KFB3, KPS6 K
LK, LKS, LKA LKPFHV, PFC2, PFS2, PFC2P, PF30, PF31, PF32,PF11, PF12, PTL2, PFK, F10, PR10, PS10, N10 PFPFT, PFP, PFS, PF50, PF60, PFF, PF13, PF14PF13, PF14 SEE NEW PRODUCT SECTION PF13PF50, PF60 SEE NEW PRODUCT SECTION PF50PFF SEE NEW PRODUCT SECTION PFFPL, PLC PLRAA, RAS RASKC SKSO, SOA, SON, SOS, SO4, TSO, TSOA,TSOS, BSO, BSOA, BSON, BSOS, BSO4 SO
SSA, SSC, SSS, KSSB SSATD SEE NEW PRODUCT SECTION TDTDO SEE NEW PRODUCT SECTION TDOWN, WNS WNPEMSERTER® Fastener Installation Presses PSIUB, IUC, IUTB, IUTC, ISB, ISC, IBB, IBC, IBLC, ITB,ITC, STKB, STKC, NFPC, NFPA, PPB, PFLB, PKB SI
STICKSCREW® System SST
QUICK PRODUCT LOCATOR
PG-5
LOW DISPLACEMENT HEAD STUDS (Bulletin FH)GENERAL INFORMATION
Installs closer to the edge of a sheetthan standard studs without causing thatedge to bulge. Flush-head for sheetsthickness .040” / 1 mm and greater.
TYPES
FHL, FHLS
STUDS FOR STAINLESS STEEL SHEETS (Bulletin FH)GENERAL INFORMATION
Installs into stainless steel sheets as thinas .040” / 1 mm. For use in sheethardness of 92 or less on the Rockwell“B” scale.
TYPES
FH4
FLUSH-MOUNTED PILOT PINS (Bulletin FH)GENERAL INFORMATION
Self-clinching pilot pins satisfy a widerange of positioning, pivot, andalignment applications. The chamferedend makes mating hole location easy.
TYPES
TPS
BROACHING TYPE STANDOFFS (Bulletin K)GENERAL INFORMATION
Standoffs available with or withoutthreads for mounting on P.C. boards,for spacing or stacking. Thread sizes#4, #6 and M3.
TYPES
KFE, KFSE
BROACHING TYPE NUTS (Bulletin K)GENERAL INFORMATION
Internally threaded fasteners formounting on P.C. boards. Thread sizes#2 to #10 and M2 to M5.
TYPES
KF2, KFS2
FLARE-MOUNTED STANDOFFS (Bulletin K)GENERAL INFORMATION
For spacing or stacking P.C. boards.Special shank is flared to increasepushout resistance. Thread sizes #4, #6and M3, M4.
TYPES
KFB3
HIGH-STRENGTH STUDS FOR THIN SHEETS (Bulletin FH)GENERAL INFORMATION
These self-clinching studs have anenlarged head diameter that providehigh-strength in sheets as thin as.040” / 1 mm.
TYPES
HFE
BROACHING TYPE STUDS (Bulletin K)GENERAL INFORMATION
Studs for mounting into P.C. boardswhich can be used as solderableconnectors as well as threadedfasteners. Thread sizes #4 to #10 andM3 to M5.
TYPES
KFH
BROACHING TYPE PANEL FASTENERS (Bulletin K)GENERAL INFORMATION
Panel fasteners with spring-loadedcaptive screws for mounting on P.C.boards. Thread sizes #4, #6, and M3.
TYPES
PFK
SELF-CLINCHING NON-FLUSH STUDS (Bulletin FH)GENERAL INFORMATION
Non-flush studs for sheets as thin as.020” / 0.51 mm. Stud head will projectabove the sheet surface approximately.025” / 0.64 mm.
TYPES
TFH, TFHS
SELF-CLINCHING HIGH-STRENGTH STUDS (Bulletin FH)GENERAL INFORMATION
For high-strength applications in sheetsas thin as .050” / 1.3 mm. Type HFHB isused for superior electrical/mechanicalattachment in copper bus bars.
TYPES
HFH,HFHS,HFHB
PEMSERT® FLUSH FASTENERS (Bulletin F)GENERAL INFORMATION
Fastener remains flush with both sidesin sheets as thin as .060” / 1.5 mm.Thread sizes #2 to 1/4” and M2 to M6.
TYPES
F
MINIATURE FASTENERS (Bulletin FE)GENERAL INFORMATION
Strong threads in a minimum of space.Available with locking or non-lockingthreads. Can be installed into sheets asthin as .020” / 0.76 mm. Thread sizes#0 to 1/4” and M2 to M6.
TYPES
U, UL, FE,FEO, FEX,
FEOX
SELF-CLINCHING FLUSH-HEAD STUDS (Bulletin FH)GENERAL INFORMATION
Flush-head studs for sheet thickness of.040” / 1 mm and greater.
TYPES
FH, FHS, FHA
CONNECT’R WARE® FASTENERS (Bulletin CW)GENERAL INFORMATION
These self-expanding clinch, slide latch,locking post fasteners are for use in D-sub cable assemblies that utilizeEthernet slide latch locking posts.
TYPES
SLPS
FOILGARD® FASTENERS (Bulletin K)GENERAL INFORMATION
Used in plated thru-holes in multi-layerP.C. boards. The self-expanding shankensures positive contact with platedthru-holes. Thread sizes #4 to #10 andM3 to M5.
TYPES
KPS6
PG-6
FLUSH-MOUNTED PANEL SCREWS (Bulletin PF)GENERAL INFORMATION
Captive screws with self-clinchingretainers can be flush mounted intosheets as thin as .125” / 3.2 mm.Thread sizes #4 to #10 and M3 to M5.
TYPES
PR10,PS10,
N10, F10
SPRING-LOADED, PLUNGER ASSEMBLY (Bulletin PF)GENERAL INFORMATION
Used as a retractable drawer-guidestop, indexing pins and latch detents.Can be locked in retracted position.Plunger diameter .250” / 6.4 mm.
TYPES
PTL2
LOW-PROFILE PANEL FASTENERS (Bulletin PF)GENERAL INFORMATION
These panel fasteners have a low-profiledesign with a large knurled head thatcan be tool or hand actuated. Threadsizes #4 to 1/4” and M3 to M6.
TYPES
PF30,PF31,PF32
PANEL FASTENER ASSEMBLIES (Bulletin PF)GENERAL INFORMATION
These panel fasteners feature auniversal slot/Phillips drive. Knurled capfor ease of use. Thread sizes #4 to 1/4”and M3 to M6.
TYPES
PF11
PANEL FASTENER ASSEMBLIES (Bulletin PF)GENERAL INFORMATION
These panel fasteners feature auniversal slot/Phillips drive. Smooth capfor limited access. Thread sizes #4 to1/4” and M3 to M6.
TYPES
PF12
PEMHEX® SELF-LOCKING FASTENERS (Bulletin PL)GENERAL INFORMATION
Trademarked blue nylon locking element(for unified fasteners) prevents threadgalling. Locking performance meetsMIL-N-25027. Thread sizes #4 to #10and M3 to M5.
TYPES
PL, PLC
PANEL FASTENER ASSEMBLIES (Bulletin PF)GENERAL INFORMATION
Completely pre-assembled spring-loaded panel fasteners that meet UL 508“operator access area” requirements.Thread sizes #4 to 1/4” and M3 to M6.
TYPES
PFC2, PFS2
PHILLIPS DRIVE PANEL FASTENERS (Bulletin PF)GENERAL INFORMATION
These panel fasteners are tool-only tomeet UL 1950 “service area access”requirements. Thread sizes #4 to 1/4”and M3 to M6.
TYPES
PFC2P
HYBRIDTM PANEL FASTENERS (Bulletin PF)GENERAL INFORMATION
These self-clinching panel fastenerassemblies have a standard black ABSknob with a steel retainer and screw.Non-stocked standard colors andcustom colors are available.
TYPES
PFP
HYBRID™ PANEL THUMBSCREWS (Bulletin PF)GENERAL INFORMATION
These thumbscrews have a standardhand or tool actuated black ABS cap.Non-stocked standard colors andcustom colors are available.
TYPES
PFT
GROUNDING STANDOFFS (Bulletin K)GENERAL INFORMATION
Used to ground P.C. boards to steel oraluminum chassis. Annular projectingteeth eliminate the need for serrated orstarwashers to make good electricalcontact with the circuit foil. Thread sizes#4, #6 and M3, M4.
TYPES
SOAG,SOSG
BROACHING SNAP-TOP® STANDOFFS (Bulletin K)GENERAL INFORMATION
All-metal standoffs with a spring actionto hold a PC board securely withoutscrews or other threaded hardware.
TYPES
KSSB
PEMFLEX® SELF-LOCKING FASTENERS (Bulletin LK)TYPES
LK, LKS,LKA
GENERAL INFORMATION
The PEMFLEX® design provides MIL-N-25027 locking performance withoutdamaging mating threads. Thread sizes#2 to #10 and M2.5 to M5.
PANEL FASTENER ASSEMBLIES (Bulletin PF)GENERAL INFORMATION
These low cost panel fasteners have asmall, compact design for limited spaceapplications. Thread sizes #4 & #6 andM3 to M4.
TYPES
PFHV
PFS™ SNAP-IN PANEL FASTENER (Bulletin PF)GENERAL INFORMATION
Installs easily with finger pressureinto any thin material. Colorcoding/matching capabilities forretainer and caps.
TYPES
PFS
R’ANGLE® RIGHT ANGLE CLINCH FASTENER (Bulletin RA)GENERAL INFORMATION
Provide strong right angle attachmentpoints in aluminum sheets. Attachmentis easily made using thread formingscrews.
TYPES
RAA
PG-7
SNAP-TOP® STANDOFFS (Bulletin SSA)GENERAL INFORMATION
Accurately space a P.C. board or panelfrom a metal chassis simply bysnapping board on standoff.
TYPES
SSA, SSS,SSC,KSSB
STANDOFFS FOR ULTRA-THIN SHEETS (Bulletin SO)GENERAL INFORMATION
These self-clinching standoffs providepermanent threads in sheets as thin as.025” / 0.63 mm.
TYPES
TSO,TSOS, TSOA
KEYHOLE® STANDOFFS (Bulletin SK)GENERAL INFORMATION
Designed so that a P.C. board orcomponent can be quickly slipped intoplace and then removed by sliding theboard sideways and lifting it off.
TYPES
SKC
THRU-HOLE, THREADED STANDOFFS (Bulletin SO)GENERAL INFORMATION
These self-clinching standoffs havethru-hole threads. Thread sizes #4 to#10 and M3 to M5. Also availableunthreaded on special order.
TYPES
SO, SOS, SOA, SON
BLIND, THREADED STANDOFFS (Bulletin SO)GENERAL INFORMATION
These self-clinching standoffs haveblind threads. Thread sizes #4 to #10and M3 to M5.
TYPES
BSO,BSOS, BSOA,BSON
R’ANGLE® RIGHT ANGLE CLINCH FASTENER (Bulletin RA)GENERAL INFORMATION
Provide strong right angle attachmentpoints in steel sheets. Type RASfasteners are threaded and attachmentis simply made using a standard screw.Thread sizes #4 to #8, M3 and M4.
TYPES
RAS
STANDOFFS FOR STAINLESS STEEL (Bulletin SO)GENERAL INFORMATION
Installs into stainless steel sheets asthin as .040” / 1 mm. For use in sheethardness of 88 or less on the Rockwell“B” scale.
TYPES
SO4
BSO4
NEW PRODUCTS
TY-D™ CABLE-TIE MOUNT HARDWARE (Bulletin TD)GENERAL INFORMATION
Self-clinching to permanently mount inenclosure. Replaces plastic or loosehardware devices. Tie slides easilythrough “eye” of fastener for fast cablemounting.
TYPES
TD
PANEL FASTENER ASSEMBLIES(Bulletin PF13)GENERAL INFORMATION
Universal slot/Phillips recess. Type PF13 meets UL 508 “operator access area” requirements. Type PF14 meets UL 1950 “service access area” requirements.
TYPES
PF13PF14
HYBRIDTM FLOATING PANEL FASTENERS (Bulletin PFF)GENERAL INFORMATION
These floating panel fasteners can beinstalled into any panel material withtool or finger operation, and cancompensate for up to .060”/1.52mmmating hole misalignment.
TYPES
PFF
LOW-PROFILE PANEL FASTENERS (Bulletin PF50)GENERAL INFORMATION
These Low-profile panel fastenersfeature a large head and Phillips recessfor tool or finger operation. Availablewith smooth cap (Type PF60) for limitedaccess.
TYPES
PF50PF60
The TECH2 press is an advanced electro-mechanical automatic system that cyclesfast, accurate and includes an integralbuilt-in quality control system. Fasteroperation is achieved with a newlydesigned, high-speed ram-to-anvilapproach with a force range from 400 lbs.to 6.5 tons occurring anywhere along the5” stroke. A generous 21” throat depthprovides the capability to install self-clinching nuts, studs, or standoffs to thecenter of a 42” workpiece.
NEW PEMSERTER® PRESSPEMSERTER® TECH2TM PRESS
Compliant
PROJECTION WELD NUTS (Bulletin WN)GENERAL INFORMATION
Unique PEM design prevents burnoutsand eliminates the need for indexingand retapping to remove weld spatter.Thread sizes #4 to 1/4” and M3 to M6.
TYPES
WN, WNS
SELF-CLINCHING CABLE-TIE HOOKS (Bulletin TDO)GENERAL INFORMATION
Allows for easy removal and return oftie-bundled wires from their mountingpoints without cutting or damaging thecable ties.
TYPES
TDO
PG-8
For more information about PEMSERTER Presses call: 1-800-523-5321 (USA only) or 215-766-8853.
PEMSERTER® SERIES 2000® PRESS
The Series 2000 press is a 71.2 kN / 16,000 lbs. automatic press system, that utilizes a programmable logic controllerand a menu driven touch screen, operator interfacing system, which is available in nine different languages. Touchscreen allows for quick-run-set-up, easy operator training, and precise fastener installation setups.
The Series 2000 press has a unique LIGHTSTREAMTM Operator Safety System (patent applied for). It is a wireless,fail-safe system which utilizes a pair of infrared light beams to improve worker and workpiece safety.
The Series 4 press is a 53.3 kN / 12,000 lbs. manual press, equipped with an adjustable stroke length, and a 45.7 cm/18” throat depth which provides a generous work area for a variety of chassis configurations. It is designed to installself-clinching fasteners in sizes M2 thru M10 / #0 thru 3/8” in steel, and sizes up to M12 / 1/2” in aluminum or circuitboards.
PEMSERTER® SERIES LT/4™ PRESS
The Series LT/4 press is a 26.7 kN / 6,000 lbs manual press designed to install unified or metric self-clinching nuts,studs, and standoffs requiring three tons of insertion force or less. It has an internal point-of-operation safety and aunique removable anvil base to accept future applications.
Stand available.
Compliant
Compliant
PEMSERTER® PRESSES
Compliant
PEMSERTER® SERIES 4® PRESS
PEMSERTER® SERIES P3™ PNEUMATIC HAND PRESS
The Series P3 fastener installation press is a portable hand tool weighing only 4.6 kg. / 10 lbs. that can develop asqueezing force of 26.7 kN / 6,000 lbs.
With the Series P3 press, you can easily install self-clinching nuts and studs in metric or unified sizes. The metricpress kit contains punches and anvils to install nuts (S, CLS, and CLA) ranging from M2 thru M5 thread sizes andstuds (FH, FHS, and FHA up to 12mm in length) ranging from M2.5 thru M5 thread sizes. The unified press kitcontains punches and anvils to install nuts and studs up to 0.5” in length ranging from #2-56 thru #10-32 thread sizes.
PEMSERTER® MICRO-MATE® HAND TOOL
The MICRO-MATE hand press is a versatile hand tool weighing only 1.25 kg. / 2.75 lbs. that can develop a squeezingforce of 1,134 kg. / 2,500 lbs.
The kit contains one hand tool, one flat punch, seven punches and dies, one punch adapter bushing, one edge-depthguide, five fastener anvils and a storage case. The metric kit installs nut sizes M3 to M5, while the unified kit installsnut sizes #2-56 to #10-32.
PG-9
PEM® Fasteners and SI® InsertsPrototype KitsThe PK-100 kit contains a wide variety of PEMself-clinching fasteners for your prototype needs.The kit contains over 1,000 different nuts, studs,standoffs and panel fasteners of various typesand sizes, so you can choose the one which willbest suit your specific design requirements. ThePK-100 is available with unified and metric parts.Price – $99.00. An SI prototype kit containing awide variety of inserts for plastics is alsoavailable for $50.00. (Prices are subject tochange without notice.)
PROTOTYPE KITS
STICKSCREW ® SYSTEM
STICKSCREW® SYSTEM (Bulletin SST)GENERAL INFORMATION
A low cost system that combines alightweight driver and “sticks” of seriallyconnected hex head screws. Simplyinsert the stick in the driver, advance tothe second screw, squeeze the trigger,place the tip of the rotating screw in thethreaded hole and the screw is drivenhome, twisting off cleanly when preciseseating torque is reached.
SI® ULTRASONIC / HEAT STAKING THREADED INSERTSGENERAL INFORMATION
Tapered, thru-threaded inserts designedfor use in tapered holes. Taper allowsfor rapid and accurate alignment priorto installation.
Straight wall, thru-threaded insertsdesigned for use in straight holes. Self-aligning lead-in provides for accuratealignment prior to installation.
Symmetrical, thru-threaded insertsdesigned for use in straight or taperedholes. Symmetrical design eliminatesthe need for orientation.
TYPES
IUBIUC
IUTBIUTC
ISBISC
SI® MOLDED-IN THREADED INSERTSTYPES
IBBIBC
IBLC
ITBITC
STKBSTKC
SI® PRESS-IN THREADED INSERTSGENERAL INFORMATION
Hexagonal inserts that provide strong,reusable threads. Hexagonal “barbed”configuration ensures high torque-outand pullout values.
Thru-threaded, slotted inserts withstrong, reusable threads. The slotcompresses allowing easy access intothe mounting hole.
Flange-head, slotted inserts withstrong, reusable threads. Flange-headeliminates direct contact of plastic withmating parts.
Straight knurl, slotted inserts withstrong, reusable threads. Straightknurling at the top end of the insertoffers higher torsional resistance.
TYPES
NFPANFPC
PPB
PFLB
PKB
SI® INSERTS FOR PLASTICS
GENERAL INFORMATION
Inserts with a blind end to protect thethreads from plastic intrusion.
Self-locking, blind threaded inserts withdeformed threads to lock screw in placeto resist vibration. Blind end protectsthe threads from plastic intrusion.
Thru-threaded inserts with a pilotdiameter and undercut to allow plasticto flow into grooves providing highpullout resistance.
Thru-threaded inserts with a uniformknurl diameter to reduce the risk of sinkmarks. Available in varying lengths forinjection molding assemblies.
If you have an applicationwhich has only one-sidedaccess for threadinstallation, please visitwww.atlas-eng.com andcheck out the full line ofSpinTiteTM and MaxTite®
threaded rivet nuts.
PEM® NORTH AMERICAN ENGINEERING REPRESENTATIVESALABAMABlair Engineering Southeast, Inc.2106-B West Ferry WayHuntsville, AL 35801Tel: 256-880-6602Fax: 256-880-9649
ARIZONAJarko AssociatesP.O. Box 14977Scottsdale, AZ 85267-4977Tel: 480-596-8533Fax: 480-596-0310
ARKANSASBlair Engineering, Inc.(See Texas)
CALIFORNIAGroh Associates22600-C Lambert Street - Suite 902Lake Forest, CA 92630Tel: 949-837-9871Fax: 949-581-2654
Northern CaliforniaEwing-Foley, Inc.10495 Bandley DriveCupertino, CA 95014Tel: 408-342-1220Fax: 408-342-1221
CANADAInterfast, Inc.Toronto/Ontario/Manitoba21 Constellation Ct.Rexdale, Ontario M9W 1K4Tel: 416-674-0770Fax: 416-674-5804
Montreal/Quebec/Maritime ProvincesTel: 514-738-5959Fax: 514-738-6363
Vancouver/B.C./Alberta/SaskatchewanTel: 604-273-0599Fax: 604-273-1090
COLORADODelltron Company6424 S. Quebec St.Englewood, CO 80111Tel: 303-741-2122Fax: 303-741-1936
CONNECTICUTBruce Brenner, Inc.(See NJ)Tel: 203-458-9362Fax: 203-453-5400
DELAWARELeJon Associates(See PA)
DISTRICT OF COLUMBIAWafer, Spindler, & Assoc., Inc.(See MD)
FLORIDABlair Engineering Southeast, Inc.2050 Coral Way - Suite 403Miami, FL 33145Tel: 305-285-7004Fax: 305-285-7746
100 2nd Ave. North, Suite 311St. Petersburg, FL 33701Tel: 727-896-8600Fax: 727-896-8606
GEORGIABlair Engineering Southeast, Inc.5500 Oakbrook Parkway, Suite 225Norcross, GA 30093Tel: 770-734-0400Fax: 770-734-9044
HAWAII215-766-8853 or 800-237-4736
IDAHOTechnical Marketing, Inc.(See WA)
ILLINOISS. W. Anderson Co.2425 Wisconsin Ave.Downers Grove, IL 60515Toll Free: 800-323-8462Tel: 630-964-2600Fax: 888-778-9853
INDIANAS.W. Anderson Co.(See IL)Tel: 317-841-3100Fax: 317-841-3777
IOWAS.W. Anderson Co.(See IL)
KANSASDelltron Company(See CO)
KENTUCKYInterconnect, Inc.(See OH)
LOUISIANABlair Engineering, Inc.(See TX)Tel: 972-964-1038Fax: 972-964-0807
MAINEBruce Brenner, Inc.(See MA)
MARYLANDWafer, Spindler, & Assoc., Inc.3277 Pine Orchard Lane, Suite 5Ellicott City, MD 21042Tel: 410-750-6007Fax: 410-750-3033
MASSACHUSETTSBruce Brenner, Inc.1194 Walnut St., Suite 202Newton, MA 02461-1269Tel: 617-332-7103Fax: 617-332-2628
MEXICOFor SonoraJarko Associates(See AZ)
Heriberto DiazProl. Americas 1600, 2 do PisoGuadalajara, JaliscoMexico, C.P. 44610Tel: 523-678-9242Fax: 523-678-9200
MICHIGANJ.E. Shireling Co.2411 Byron Station Drive SW, Suite 3Byron Center, MI 49315Tel: 616-878-5006Fax: 616-878-5086
3157 South Rues RoadOwaasa, MI 48867Tel: 517-725-1510Fax: 517-725-9011
MINNESOTAS. W. Anderson Co.18674 Lake Drive EastChanhassen, MN 55317Toll Free: 800-433-0593Tel: 952-934-2700Fax: 952-934-2716
MISSISSIPPIBlair Engineering, Inc.(See TX)
MISSOURIEasternS. W. Anderson Company(See MO)
WesternDelltron Company(See CO)
MONTANATechnical Marketing, Inc.(See WA)
NEBRASKADelltron Company(See CO)
NEVADANorthernEwing-Foley, Inc.(See Northern CA)
SouthernJarko Associates, Inc.(See AZ)
NEW HAMPSHIREBruce Brenner, Inc.(See MA)
NEW JERSEYNorthern NJBruce Brenner, Inc.768 Carver Ave.Westwood, NJ 07675Tel: 201-444-7103Fax: 201-666-8151
Southern NJLeJon Associates(See PA)
NEW MEXICOJarko Associates(See AZ)
NEW YORKBruce Brenner, Inc.Eastern and Southern NY(See NJ)Central and Western NYTel: 716-385-3232Fax: 716-442-2210Brooklyn, Queens, Long IslandTel: 631-422-1006Fax: 631-821-3398
NORTH CAROLINABlair Engineering Southeast, Inc.8961 Harvest Oaks Drive, Suite 205Raleigh, NC 27615Tel: 919-870-7775Fax: 919-870-7950
NORTH DAKOTAS.W. Anderson Company(See MN)
OHIOInterconnect, Inc.12573 Chillicothe RoadChesterland, OH 44026Tel: 440-729-1900Fax: 440-729-7888
OKLAHOMABlair Engineering, Inc.(See TX)
OREGONTechnical Marketing, Inc.10700 SW Beaverton-Hillsdale Hwy.Suite 535Beaverton, OR 97005Tel: 503-627-9000Fax: 503-627-9161
PENNSYLVANIAEastern PALeJon AssociatesP.O. Box 1246Newtown, PA 18940Tel: 215-968-7565Fax: 215-968-0134
Western PAInterconnect, Inc.(See OH)
PUERTO RICOTel: 215-766-8853 or 800-237-4736
RHODE ISLANDBruce Brenner, Inc.(See MA)
SOUTH CAROLINABlair Engineering Southeast, Inc.(See NC)
SOUTH DAKOTAS.W. Anderson Co.(See MN)
TENNESSEEBlair Engineering Southeast, Inc.(See AL)
TEXASBlair Engineering, Inc.4011 W. Plano Parkway, Suite 128Plano, TX 75093Tel: 972-964-1038Fax: 972-964-0807
2912 RogerdaleHouston, TX 77042Tel: 713-782-8338Fax: 713-782-8344
13706 Research Blvd., Suite 309Austin, TX 78750Tel: 512-257-2207Fax: 512-257-0070
UTAHDelltron Company(See CO)
VERMONTBruce Brenner, Inc.(See MA)
VIRGINIAWafer, Spindler & Associates, Inc.(See MD)
WASHINGTONTechnical Marketing, Inc.320 120th Avenue NE, Suite 100Bellevue, WA 98005Tel: 425-450-4600Fax: 425-462-9786
WEST VIRGINIAWafer, Spindler & Associates, Inc.(See MD)
WISCONSINS.W. Anderson Company(See IL)
Eastern WITel: 262-367-9105Fax: 262-367-8406
Southern WITel: 262-248-4331Fax: 262-248-4335
Western WI (see MN)
WYOMINGDelltron Company (See CO)
PG-10
PG-11
PEM® WORLDWIDE AUTHORIZED DISTRIBUTORS & REPRESENTATIVES
NORTH AMERICA
AERO-SPACE COMPUTER SUPPLIES9270 Bryant Avenue SouthMinneapolis, MN 55420Tel: 612-884-4725Toll Free: 800-234-4725Fax: 612-884-5561 www.ascs.com
AERO-SPACE SOUTHWEST21450 North 3rd AvenuePhoenix, AZ 85027Tel: 623-582-2779Toll Free: 800-289-2779Fax: 623-582-2019www.aerospacesw.com
S.W. ANDERSON COMPANY2425 Wisconsin AvenueP.O. Box 460 Downers Grove, IL 60515Tel: 630-964-2600Toll Free: 800-323-8462Fax: 888-778-9853www.swaco.com
18674 Lake Drive EastChanhassen, MN 55317Tel: 612-934-2700Toll Free: 800-433-0593Fax: 612-934-2716 www.swaco.com
7703 First Place - Unit EOakwood Village, OH 44146-6705Tel: 440-232-4415Toll Free: 800-351-0380Fax: 440-232-4188www.swaco.com
16309 Westwoods Business Park Drive Ellisville, MO 63021-4521Tel: 636-386-2622Toll Free: 800-323-8462Fax: 636-386-2684www.swaco.com
ARCONIX / USAa PennEngineering® company800 Del Norte Blvd.Oxnard, CA 93030Tel: 805-988-4882Toll Free: 800-488-1990Fax: 805-988-1254www.arconix.com
2115 Old Oakland RoadSan Jose, CA 95131Tel: 408-321-9011Fax: 408-321-0220www.arconix.com
Totem Skyline Business Park12015 115th Avenue N.E.Building E, Suite 100Kirkland, WA 98034Tel: 425-823-3485Toll Free: 800-445-1959Fax: 425-823-8355www.arconix.com
COLORADO ELECTRONIC HARDWARE, INC.16050 Table Mountain Parkway, Suite 400Golden, CO 80403Tel: 303-431-4334Toll Free: 800-525-2129Fax: 303-420-0479 www.cehi.com
ENFASCO, INC.Induatrial Center Bldg. 37300 US Highway 130Pennsauken, NJ 08110Tel: 856-662-7660Fax: 856-662-6172
GENERAL FASTENERS COMPANY11820 Globe RoadLivonia , MI 48150Tel: 734-452-2265Toll Free: 800-945-2658Fax: 734-462-3022www.genfast.com
HI-TECH FASTENERS, INC.4940 Winchester Blvd.Frederick, MD 21703Tel: 301-831-1277Toll Free: 800-466-1940Fax: 301-831-8296 www.hitechfasteners.com
INTERFAST, INC.21 Constellation CourtRexdale, OntarioM9W 1K4 CanadaTel: 416-674-0770Fax: 416-674-5804www.interfast.ca
6360 Cote de LiesseVille St-Laurent, QuebecH4T 1E3 CanadaTel: 514-738-5959Fax: 514-738-6363www.interfast.ca
#7-3691 Viking WayRichmond, BCV6V 1N6 CanadaTel: 604-273-0599Fax: 604-273-1090www.interfast.ca
NAPPCO FASTENER COMPANYP.O. Box 5558611260 Hempstead RoadHouston, TX 77255-5586Tel: 713-688-2521Toll Free: 800-580-2521Fax: 713-957-4315www.nappco.com
NEW YORK FASTENER CORP.599 Industrial AvenueParamus, NJ 07652Tel: 201-265-8770Toll Free: 800-631-1993Fax: 201-265-3765www.nyf.com
D.B. ROBERTS COMPANY18 Terry AvenueBurlington, MA 01803Tel: 781-273-1110Toll Free: 800-800-6887Fax: 781-273-0110www.dbroberts.com
6901 TPC Drive – Suite 500Orlando, FL 32822Tel: 407-438-1999Toll Free: 800-559-1604Fax: 407-438-7775www.dbroberts.com
1100 Valwood Parkway - Suite 108Carrollton, TX 75006Tel: 972-466-3666Toll Free: 800-800-9991Fax: 972-466-1646www.dbroberts.com
3 Townline CircleRochester, NY 14623Tel: 716-475-0070Toll Free: 800-788-4004Fax: 716-475-0887www.dbroberts.com
435 Dividend Drive - Suite AP.O. Box 2249Peachtree City, GA 30269Tel: 770-487-7600Toll Free: 800-241-9300Fax: 770-487-2730www.dbroberts.com
2300 Westinghouse Blvd. - Suite 105Raleigh, NC 27604Tel: 919-850-2300Toll Free: 800-717-4377Fax: 919-850-2520www.dbroberts.com
100 South Turnpike RoadWallingford, CT 06492Tel: 781-273-1110Toll Free: 800-800-6887Fax: 781-273-0110www.dbroberts.com
7301 Industrial Park BoulevardMentor, OH 44060Tel: 440-918-9200Toll Free: 800-378-6887Fax: 440-918-9232www.dbroberts.com
TOWER FASTENERS CO., INC.1690 North Ocean AvenueHoltsville, NY 11742-1823Tel: 631-289-8800Toll Free: 800-688-6937Fax: 631-289-8810www.towerfast.com
510 Louise LaneNorth Wales, PA 19454Tel: 215-699-2070Toll Free: 800-589-2070Fax: 215-699-2246www.towerfast.com
41 Industrial Park RoadMiddlefield, CT 06455Tel: 860-349-0085Toll Free: 800-477-8693Fax: 860-349-0078www.towerfast.com
27-3 Ironia RoadFlanders, NJ 07836Tel: 973-252-6900Toll Free: 877-468-6937Fax: 973-252-4305www.towerfast.com
TROPIC FASTENERS, INC255 Semoran Commerce PlaceApopka, FL 32703Tel: 407-880-4777Toll Free: 800-488-4777Fax: 407-880-2122www.tropicfast.com
1010 Classic RoadApex, NC 27502Tel: 919-249-2100Toll Free: 800-487-9776Fax: 919-249-2119www.tropicfast.com
100 Petty Road - Suite GLawrenceville, GA 30043Tel: 770-682-0177Toll Free: 888-777-7218Fax: 770-682-5977www.tropicfast.com
OTHER WORLDWIDE LOCATIONS
AUSTRALIAAMPEC TECH. PTE. LTD.4 Wetherill StreetP.O. Box 6385Silverwater N.S.W. 2128AustraliaTel: 2-9648-4488Fax: 2-9648-4500
AUSTRIAKOENIG AUSTRIAL GmbHBahnhofstrasse 1A-4481 Asten/Linz, AustriaTel: 7224-67090Fax: 7224-67752
BELGIUMBELUMA S.A.Assesteenweg 15B-1730 Asse (Mollem)Industriezone Mollem, BelgiumTel: 2-454-0120Fax: 2-454-0130
BRAZILAEROMOT INDUSTRIA MECANICOMETALURGICA LTD.Av. Das Industria No. 1210CEP 90200-290Porto Alegre-RS, BrazilTel: 51-3371-1644Fax: 51-3371-1655
CANADAINTERFAST, INC.21 Constellation Ct.Rexdale, OntarioM9W 1K4 CanadaTel: 416-674-0770Fax: 416-674-5804
PG-12
CHINABSHANGHAI HOIDAN CO. LTD.Room 2312, 595 Wu Ding Road(South Block)Jing An, Shanghai, China 200040Tel: 86-21-62716463Fax: 86-21-6251442
HEMMING CORPORATIONShin-Lan Section, Humen TownDongguan City, Guangdong ProvinceChinaTel: 86-0769-5527452Fax: 86-0769-5527434
C.I.S. (FORMER SOVIET UNION)KOENIG VERBINDUNGSTECHNIK GmbH(See Germany)
CZECH REPUBLICARCUS ENGINEERING SPOL. S.R.O.Famerovo Nam.32CZ-61800 BrnoCzech RepublicTel: 05482102549Fax: 0548210248
DENMARKJ.D. FRIDERICHSEN A/S46, SydmarkenDK-2860 Søborg, DenmarkTel: 7027-2327Fax: 7027-2337
ENGLANDARCONIX / UKa PennEngineering® companyDoncaster RoadKirk Sandall Industrial EstateDoncaster, South YorkshireDN3 1QR, EnglandTel: 01302-893100Fax: 01302-885341
FINLANDGRONBLOM OYMekaanikonkatu 6, PO Box 8100810 Helsinki, FinlandTel: 358-975581Fax: 358-9780715
FRANCETITANOX, SA141-143 Rue du 1er MaiZA du Petit Nanterre - 4F-92737 Nanterre Cedex, FranceTel: 1-478-67440Fax: 1-478-67459
GERMANYKOENIG VERBINDUNGSTECHNIK GmbHMax-Eyth-Strasse 14D-89186 IllerriedenUlm, GermanyTel: 7306-782-158Fax: 7306-2301
HONG KONGHOIDAN CO., LTD.Flat C, 10th Floor45 Kut Sing StreetShing King Industrial Bldg.Chaiwan, Hong KongTel: 2896-0682Fax: 2897-8015
HUNGARYBIOTEK ENGINEERING KFT.H-1106 BudapestJaszberenyi U.T. 29, HungaryTel: 1-261-4733Fax: 1-260-8635
INDIATECHTRAN ELECTRONICS(INDIA) PTE LTD.Basusree 23 Goabagan LaneCalcutta - 700 006, IndiaTel: 33-350-3767Fax: 33-554-5741
INDONESIAACUMEN ENGINEERINGJalan Raya Lapangan TembakKomplek Ruko Cibubur IndahBlok F No. 7Jakarta Timur 13720Indonesia Tel: 0062-21-870-5219 Fax: 0062-21-870-5240
IRELANDMAC B LTD.Unit 3 Glanmire Industrial EstateSallybrook, GlanmireCountry Cork, IrelandTel: 00-353-21-4866733Fax: 00-353-21-4866742
ISRAELTALVITON ELECTRONICS47 Yair StreetP.O. Box 6723Ramat-Gan 52167, IsraelTel: 972-3-6748168Fax: 972-3-6748450
ITALYFORIND-AVIO ELETTRONICAVia Copernico, 620060 Cassina De PecchiMilano, ItalyTel: 02-953-43080Fax: 02-953-43104
JAPANJAPAN MACHINERY COMPANY LTD.Central P.O. Box 1451 TokyoJapan 100-91Tel: 3-3573-5421Fax: 3-3571-7865
SPS / UNBRAKO K.KOgawa 2-25-4, MachidaTokyo, 194-0003, JapanTel: 42-799-5991Fax: 42-799-5442
KOREASANG MYUNG CO. LTD.Chungang Circulation Complex RA-24151258 Kurobon-dongKuro-ku, Seoul, KoreaTel: 02-625-4567Fax: 02-625-2110
LUXEMBOURGBELUMA S.A.(See Belgium)
MALAYSIATEXTRAN INDUSTRIES (PENANG) SDN BHDNo. 6, Tingkat Ciku 3, Taman Ciku,14000 Bukit Mertajam,Penang, MalaysiaTel: 04-530-3331Fax: 04-530-9331
TEXTRAN INDUSTRIES (M) SDN BHDNo. 9-0, Endah Gateway Jalan 2/149BTaman Sri Endah, Bandar Baru SeriPertaling 57000 Kuala Lumpur, MalaysiaTel: 03-957-4313, 03-957-6977Fax: 03-958-6618
MEXICOARCONIX / MexicoA Penn Engineering® companyProl. Americas 1600, 2 do PisoGuadalajara, JaliscoMexico C.P. 44610Tel: 523-678-9242Fax: 523-678-9200
NETHERLANDSONKENHOUT & ONKENHOUT B.V.Postbus 661110 AB Diemen, AmsterdamNetherlandsTel: 20-660-0239Fax: 20-660-0254
NEW ZEALANDEDL FASTENERS LTD.4 Stanway PlaceP.O. Box 12-438Penrose Auckland, New ZealandTel: 09-579-0080Fax: 09-579-0850
NORWAYTORP FASTENERSBorggaten 1Postboks 2953 Tøyen0608 Oslo, NorwayTel: 22 68 15 30Fax: 22 19 91 27
PHILIPPINESADVANCE FASTENERS, INC.Room 1506, Jafer Place, Building #19Eisenhower Street GreenhillsSan Juan, Metro Manila PhilippinesTel: 632-727-7905Fax: 632-727-7912
POLANDKVT POLSKA SPUl. Zalogowa 17PL80-557 GdanskPolandTel: 58-762-0887Fax: 58-762-0888
PORTUGALUNIAO TECNICAS DESOLDADURA, LDA (UTEC)Rua Artilharia Um, 104 D/E1070 Lisboa, PortugalTel: 35121-3859626Fax: 35121-3883303
SINGAPOREARCONIX / SINGAPOREa PennEngineering® companyCitipoint Industrial Complex152 Paya Lebar Road #03-06409020 SingaporeTel: 65-745-0660Fax: 65-745-2400
SOUTH AFRICANorthern South AfricaA&G FASTENERS (PTY.) LTD.15 Rawbone StreetOphirton 2091, Johannesburg South AfricaTel: 11-493-8690Fax: 11-493-0001
Southern South AfricaBOLT FAST CCNo. 4 Cable Close, Western Province ParkEpping Industria 7475Cape Town, South AfricaTel: 21-5345576Fax: 21-5342089
SPAINAEROTECNICA S.A.Apartado de Correos No. 118C/Cedro 9.3-9.4Poligone Industrial Los Huertecilloss28350 CiempozuelosMadrid 9, SpainTel: 91-808-6133Fax: 91-808-6002
SWEDENCOLLY COMPONENTS ABBox 76SE-164 94 Kista,Stockholm, SwedenTel: 8-703-0100Fax: 8-703-9841
SWITZERLANDKOENIG VERBINDUNGSTECHNIK AGLagerstrasse 8CH-8953 DietikonZurich, SwitzerlandTel: 1-743-3333Fax: 1-740-6566
TAIWANHEMMING CORPORATION4F-1, No. 173-1, Sec. 2Fu Hsin South RoadTaipei 106, Taiwan R.O.C.Tel: 2-2-702-1038Fax: 2-2-709-0014
THAILANDUNIVERSAL TECHFAST CO., LTD.23 Pattanakarn Road 53 Pattanakarn Road,Suanluang, Bangkok10250 ThailandTel: 662-722-1500-2Fax: 662-722 -1503
U.K. And Europe:Kirk Sandall Industrial EstateDoncaster, South Yorkshire • DN3 1QR, EnglandE-mail: [email protected]: 01302 893100 • Fax: 01302 885341
World Headquarters:5190 Old Easton RoadDanboro, PA 18916 USAE-mail: [email protected]: 215-766-8853 • Fax: 215-766-3633
Asia/Pacific:Citipoint Industrial Complex152 Paya Lebar Road #03-06 • Singapore 409020E-mail: [email protected]: 6 745 0660 • Fax: 6 745 2400
Specifications subject to change without notice.
Printed in U.S.A.CAGE-46384