Download - 9I270 UMX02 v1 0 - optimus
Manual de instrucciones
Operating instructions
UMX-02/0
9I2
70
V1
.02
3/0
3/1
0
N º .
EspañolEspañol
EnglishEnglish
MATRIZ MICROPROCESADA DE AUDIO
AUDIO MICROPROCESSED MATRIX
2
Esp
UMX-02/0
ESPAÑOL
3UMX-02/0 v1.0
I. DESCRIPCIÓN Y CONEXIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
1. Descripción . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2. Módulo de alimentación y control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.1. Alimentación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.2. Conexión de la entrada y la salida RS-485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.2.1. Conexión entre distintos equipos (UMX-02/0, DALA-01/0B, MD-500, MD-500EM...) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.2.2. Conexión entre la UMX-02/0 y la tarjeta RS-485 del ordenador de control . . .8
2.3. Conexión de la masa al chasis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
3. Expansión de la UMX-02/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4. Controles frontales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.1. Monitorización . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.1.1. Selección del canal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.1.2. Volumen de monitorización . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.1.3. Nivel del canal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.2. Teclas de navegación, de acceso a menús y de entrada de datos . . . . . . . . . . . . . .10
4.2.1. Teclas de navegación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4.2.2. Tecla MENU/OK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4.2.3. Tecla CANCEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4.2.4. Tecla ENTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4.2.5. Tecla DEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4.2.6. Teclado numérico. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4.3. Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4.3.1. Caracteres especiales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4.4. Conector download DB-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4.4.1. Descarga de confi guraciones al equipo a través del conector DB-9 frontal . .11
4.4.2. Actualización del fi rmware para UMX-02/0 a través del conector DB-9 frontal 13
5. Características técnicas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
II. CONFIGURACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
1. Generalidades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
2. Confi guración a través de PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3. Menú Confi guraciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3.1. Acceso al menú Configuraciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3.2. Entradas de Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3.2.1. Estructura del menú Entradas Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
3.2.2. Confi guración de las Entradas de Audio . . . . . . . . . . . . . . . . . . . . . . . . . .19
3.3. Salidas Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
3.3.1. Estructura del menú Salidas Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
3.3.2. Confi guración de las Salidas de Audio . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Esp
UMX-02/0
ESPAÑOL
4 UMX-02/0 v1.0
3.4. Entradas de contactos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
3.4.1. Estructura del menú Entradas Contactos . . . . . . . . . . . . . . . . . . . . . . . . .28
3.4.2. Confi guración de las Entradas de Contactos . . . . . . . . . . . . . . . . . . . . . . .28
3.5. Salidas de Contactos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
3.5.2. Confi guración de las Salidas de Contactos . . . . . . . . . . . . . . . . . . . . . . . .31
3.5.1. Estructura del menú Salidas Contactos . . . . . . . . . . . . . . . . . . . . . . . . . .31
3.6. Grupos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
3.6.1. Estructura del menú Grupos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
3.6.2. Confi guración de Grupos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
3.7. Opciones Comunes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
3.7.1. Estructura del menú Opciones Comunes . . . . . . . . . . . . . . . . . . . . . . . . .35
3.7.2. Confi guración de las Opciones Comunes . . . . . . . . . . . . . . . . . . . . . . . . .35
4. Menu Propiedades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
4.1. Acceso al menú Propiedades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
4.2. Visualizar las configuraciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
5.1. Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
5. Menu Usuario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
5.2. Logout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
6. Menú Registro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
7. Ejemplos de confi guración. Casos prácticos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
7.1. Ejemplo de instalación con subzonas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
7.2. Ejemplo de instalación con micrófono con selección de zonas . . . . . . . . . . . . . . . . .41
8. Versiones de Software y Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
9. Document Version Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
9. Garantía . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Esp
UMX-02/0
ESPAÑOL
5UMX-02/0 v1.0
I. DESCRIPCIÓN Y CONEXIÓN
1. Descripción
Matriz Microprocesada de Audio para instalaciones de megafonía. De concepción totalmente modular, permite el control y direccionamiento simultáneo de 16 señales de audio (programa y/o prioridad) hacia diferentes salidas cubriendo todas las necesidades de una instalación de megafonía.
Su diseño permite realizar instalaciones que cumplan con las especifi caciones de la normativa de evacuación EN/UNE 60849.
Características:
• Matriz microprocesada de audio con funcionamiento “Stand-alone” o controlada por PC
• 10 posiciones para el alojamiento de tarjetas.
• Conector de expansión de bus de audio (16 canales), para enlazar diferentes “mainframes”.
• Bus de control RS485, permite enlazar diferentes UMX02/0 entre ellos y/o hacia un PC (opcional).
• Altavoz de monitorización de los 16 canales de audio.
• Display alfanumérico de 4 x 20 caracteres.
• Teclado frontal.
• Confi guración mediante el teclado frontal y/o PC externo.
• Funcionamiento independiente y/o con PC de monitorización.
• Alimentación a 24 Vcc.
• Ocupa 2 unidades en rack de 19’’.
Esp
UMX-02/0
ESPAÑOL
6 UMX-02/0 v1.0
1 Altavoz monitor
2 Volumen monitor
3 Selector de canal de monitorización
4 Indicador de nivel de canal
5 Display alfanumérico
6 Indicadores Rx (recepción RS-485) y Tx (transmisión RS-485)
7 Teclado numérico, tecla 5 y tecla DEL
8 Led ON / OFF
9 Interruptor ON / OFF
10 Conector DB-9
11 Indicador de canal monitorizado
12 Teclas de navegación
13 Conector de alimentación
14 Módulo de alimentación y control
15 Espacio para tarjetas (10)
16 Conector de expansión del bus de audio
14
13
15
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse3A
24V
RS-485OUT
RS-485IN
OP
TIM
US
S.A
.
UMX-02/0
AU
DIO
BU
SL
IN
K0
DELDEL
3
6
9
2
5
8
1
4
7
Position
10
Position
9
Position
8
Position
7
Position
6
Position
5
Position
4
Position
3
Position
2
Position
1
16
1
2
3
11
12
98
7
6
5
4
10
Figura 1
Esp
UMX-02/0
ESPAÑOL
7UMX-02/0 v1.0
2. Módulo de alimentación y control
2.1. Alimentación
Para alimentar la UMX-02/0 es necesaria una fuente de alimentación de 24 V.c.c.
El consumo, sin tarjetas, es de 285mA. Al colocar las distintas tarjetas, el consumo aumentará en función del modelo y la cantidad de tarjetas colocadas.
2.2. Conexión de la entrada y la salida RS-485
La UMX-02/0 se comunica con el PC de control y los distintos elementos del sistema analógico (MD-500, MD-500EM, COU-02, UDCE-01...) a través de un bus RS485. Para ello, utiliza el protocolo CSMA (Carrier Sense Multiple Acces)
2.2.1. Conexión entre distintos equipos (UMX-02/0, DALA-01/0B, MD-500, MD-500EM...)
Deben utilizarse conectores RJ45 de 8 contactos, con carcasa metálica.
1 Alimentación
2 Fusible
3 Salida del bus RS-485
4 Entrada del bus RS-485
5 Interruptor ON/OF de la salida RS-485
6 Indicador de recepción del bus RS-485
7 Indicador de transmisión del bus RS-485
Figura 2
TO
UMX-02/0
RS-485 IN
FROM
UMX-02/0
RS-485 OUT55
SHIELDSHIELD
44
1
8
1
8
RJ-45 RJ-45
DATA B ( )
DATA A ( )
TX
RXOFF
ON
RS-485
OUT
RS485 OUT : ON
RS485 OUT
ON
RS485 OUT
ON
RS485 OUT
ON
RS485 OUT
OFF
RS485
OUT
RS485
OUT
RS485
OUT
RS485
IN
RS485
IN
RS485
IN
RS485
IN
1
2
7
6
3
5
Fuse
3A
TX
RXOFF
ON
Ma
de
inE
USp
ain
24V
RS-485
OUT
RS-485
IN
OP
TIM
US
S.A
.
4
UMX-02/0
Figura 3
Esp
UMX-02/0
ESPAÑOL
8 UMX-02/0 v1.0
2.2.2. Conexión entre la UMX-02/0 y la tarjeta RS-485 del ordenador de control
2.3. Conexión de la masa al chasis
En toda instalación de megafonía es muy importante que haya un solo punto de unión entre la masa de señal y el contacto de tierra de la red.
Si la instalación de megafonía está compuesta por varios aparatos, probablemente tendrán los chasis unidos, bien mediante el terminal de tierra de la conexión a la red, o bien porque están montados en un armario rack.
Si las masas están también unidas por los circuitos de señal, es aconsejable quitar el puente entre la masa y el chasis de todos los aparatos excepto uno.
Para separar la masa del chasis en la UMX-02/0, debe quitarse la placa del módulo de alimentación-control y extraer el puente JP1.
TO
UMX-02/0
RS-485 IN5
SHIELD
Notconnected
4
1
8
12
34
67
8
9
5
RS-485 P.C.
CONNECTION
COM 6
PORT 2
D-SUB FEMALE
CONNECTOR
RJ-45
D-SUB MALE
CONNECTOR
DATA B ( )DATA B
DATA ADATA A ( )120
TX
RXOFF
ON
Ma
de
inE
USp
ain
Ma
de
inE
USp
ain
Fuse3A
Fuse3A
24V
RS-485OUT
RS-485OUT
RS-485IN
RS-485IN
OP
TIM
US
S.A
.O
PTI
MU
SS.A
.
UMX-02/0
Figura 4
Figura 5
Esp
UMX-02/0
ESPAÑOL
9UMX-02/0 v1.0
3. Expansión de la UMX-02/0
En el caso en que el número de tarjetas necesarias para una instalación no quepan en una UMX-02/0 (más de 10 tarjetas), se pueden ubicar en varios “mainframes”.
Estos deben unirse mediante el bus de control RS485 y el bus de audio, accesibles externamente, tal y como se indica en la fi gura 6.
Para unir el bus RS485 deben utilizarse conectores RJ45 de 8 pins con carcasa metálica y cable CAT 5 STP (ver apartado 2.2. Conexión de la entrada y la salida RS-485).
Para unir el bus de audio debe utilizarse cable plano de 34 vías. Al montar el cable debe ponerse especial cuidado en colocar los conectores en la misma posición y cara del cable.
4. Controles frontales
4.1. Monitorización
4.1.1. Selección del canal
Pulse los botones CHANNEL SELECTOR (+ y - ) hasta que en el display se indique el canal deseado.
4.1.2. Volumen de monitorización
Pulse los botones MONITOR VOLUME (+ y - ) hasta obtener el volumen deseado.
4.1.3. Nivel del canal
La barra de leds permite visualizar el nivel de señal de cada uno de los 16 canales de audio internos de la UMX-02/0.
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse3A
24V
RS-485OUT
RS-485IN
OP
TIM
US
S.A
.
UMX-02/0
AU
DIO
BU
SL
IN
KA
UD
IO
BU
SL
IN
K
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse3A
24V
RS-485OUT
RS-485IN
OP
TIM
US
S.A
.
UMX-02/0
AU
DIO
BU
SL
IN
KA
UD
IO
BU
SL
IN
K
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse3A
24V
RS-485OUT
RS-485IN
OP
TIM
US
S.A
.
UMX-02/0
AU
DIO
BU
SL
IN
KA
UD
IO
BU
SL
IN
K
Figura 6
CHANNEL SELECTOR
CHANNEL
LEVEL
0 dB
peak
MONITOR VOLUME
Figura 7
Esp
UMX-02/0
ESPAÑOL
10 UMX-02/0 v1.0
4.2.1. Teclas de navegaciónPulse las teclas de navegación para desplazarse dentro de un menú o para mover el cursor dentro de un grupo.
4.2.2. Tecla MENU/OKSe utiliza para:
Entrar a un menú seleccionado.
Guardar un cambio.
4.2.3. Tecla CANCEL Permite salir de un menú o cancelar cambios no guardados.
4.2.4. Tecla ENTERSe utiliza para:
Seleccionar una opción (no un menú).
Agregar elementos a una cadena de texto.
4.2.5. Tecla DEL Se utiliza para eliminar un elemento de una cadena de texto.
4.2.6. Teclado numérico.Las teclas 0 a 9 se utilizan para entrar datos numéricos.
Cuando el sistema requiere un dato numérico, en el display aparece el cursor parpadeando.
4.3. Display
La UMX-02/0 dispone de un display alfanumérico de 4 x 20 caracteres.
4.3.1. Caracteres especiales
Cursor de carácter.
Indicador de posición en menús de navegación.
Opción activa.
Tarjeta presente y detectada.
Tarjeta no presente o no detectada.
Aparece cuando parte de una cadena de texto no está visible en pantalla
4.2. Teclas de navegación, de acceso a menús y de entrada de datos
DEL
Esp
UMX-02/0
ESPAÑOL
11UMX-02/0 v1.0
4.4. Conector download DB-9
Para acceder al conector download DB-9 quitaremos la placa frontal download.Este conector DB-9 permite la actualización del fi rmware y confi guración del equipo.
4.4.1. Descarga de confi guraciones al equipo a través del conector DB-9 frontal1. Apague la UMX-02/0 mediante el interruptor ON/OFF.
2. Coloque el dipswitch frontal en posición RS232 CONFIGURATION.
0
DEL9
8
7
3
6
2
5
1
4
Figura 8
1 2 3 4 5 76 8
1 2 3 4 5 76 8
RS232 CONFIGURATION
NORMAL MODEON
ON
OFF
1 2 3 4 5 76 8
FIRMWARE DOWNLOAD MODEON
OFF
OFF
DIPSWITCH CONFIGURATION
Figura 9
Esp
UMX-02/0
ESPAÑOL
12 UMX-02/0 v1.0
4. Alimente la UMX-02/0.
El display LCD de la UMX-02/0 queda inhabilitado y solo aparecen recuadros negros en posiciones aleatorias.
5. Abra el software SCF-01 ó SCM-01 (P.A. Manager), y efectúe la descarga de confi guraciones (para más información vea el manual de usuario del P.A. Manager)
6. Desconecte la alimentación de la UMX-02/0.
7. Desconecte el cable RS232.
8. Coloque el dipswitch frontal en posición NORMAL MODE y alimente de nuevo la UMX-02/0.
3. Conecte el cable RS232 entre el PC y el conector frontal de la UMX-02/0.
1 2 3 4 5 76 8
1 2 3 4 5 76 8
RS232 CONFIGURATION
NORMAL MODEON
ON
OFF
1 2 3 4 5 76 8
FIRMWARE DOWNLOAD MODEON
OFF
OFF
Figura 11
UMX-02/0 SERIESPORT
Computer (*)
Rs232CABLE
ETHERNET
CABLE
RS232
(PIN to PIN
connected)
9 PINS
SUB D
MALE
9 PINS
SUB D
FEMALE
pin 1 pin 1
pin 2 pin 2
pin 3 pin 3
pin 4 pin 4
pin 5 pin 5
pin 6 pin 6
pin 7 pin 7
pin 8 pin 8
pin 9 pin 9
Figura 10
UMX-02/0 USBPORT
USB/RS232CONVERTER
Computer (*)
ETHERNET
Esp
UMX-02/0
ESPAÑOL
13UMX-02/0 v1.0
4.4.2. Actualización del fi rmware para UMX-02/0 a través del conector DB-9 frontal
1. Apague la UMX-02/0 mediante el interruptor ON/OFF.
2. Coloque el Dipswitch frontal en posición FIRMWARE DOWNLOAD MODE.
3. Conecte el cable RS232 entre el PC y el conector frontal de la UMX-02/0. (Fig. 10)
4. Alimente la UMX-02/0.
El display LCD de la UMX-02/0 queda inhabilitado y solo aparecen recuadros negros en posiciones aleatorias.
5. Inicie el software FLASH DEVELOPMENT TOOLKIT BASIC, haciendo doble clic sobre el icono correspondiente.
1 2 3 4 5 76 8
1 2 3 4 5 76 8
RS232 CONFIGURATION
NORMAL MODEON
ON
OFF
1 2 3 4 5 76 8
FIRMWARE DOWNLOAD MODEON
OFF
OFF
DIPSWITCH CONFIGURATION
Figura 12
V 10.1
UMX-02/0
H8/3068
Fuse
3A
TX
RXOFF
ON
Ma
de
inE
USp
ain
24V
RS-485
OUT
RS-485
IN
OP
TIM
US
S.A
.
UMX-02/0
Figura 13
6. Abra el menu Options. Habilite la opcion AutoDisconnect y seleccione New Settings.
7. Seleccione el proyecto UMX_H8_3064.AWS o UMX_H8_3068.AWS ( en funcion de la etiqueta situada en la parte posterior de la UMX-02/0) y haga un clic en Siguiente.
Figura 14
Esp
UMX-02/0
ESPAÑOL
14 UMX-02/0 v1.0
8. Seleccione el puerto que se vaya a usar y haga clic en Siguiente.
9. Seleccione la frecuencia segun el equipo (UMX=7.3728 Mhz)y haga clic en Siguiente.
10. Deje las opciones por defecto y haga clic en Siguiente.
11. Dejelas opciones por defecto y clicar Finalizar.
12. Active el checkbox User/Data Area y haga clic en el botón y seleccione Browse.
13. Seleccione el archivo que se desea descargar al equipo y haga clic en Abrir.
Figura 15
Figura 16
Esp
UMX-02/0
ESPAÑOL
15UMX-02/0 v1.0
5. Características técnicas
Alimentación 24 V.c.c.
Consumo 560 mA (sin tarjetas)
Capacidad 10 tarjetas
Canales de audio 16
Sistema de comunicaciónRS-485 mediante conector RJ45
Protocolo CSMA/CD
AcabadosPlaca frontal: Hierro pintado negro
Tapa: Skinplate negro
Velocidad de transmisión 9600 bps
Peso 5,8 Kg.
Medidas 482,6 x 88,6 x 300 mm
1 2 3 4 5 76 8
1 2 3 4 5 76 8
RS232 CONFIGURATION
NORMAL MODEON
ON
OFF
1 2 3 4 5 76 8
FIRMWARE DOWNLOAD MODEON
OFF
OFF
14. Haga clic en el botón Program Flash y empezará la descarga. Cuando la descarga fi naliza aparece el mensaje “Image succefully Written to device” en color verde.
15. Cierre el software Flash Development Toolkit Basic seleccionando Exit.
16. Desconecte la alimentación de la UMX-02/0.
17. Desconecte el cable de download.
18. Coloque el dipswitch frontal de la UMX-02/0 en posición NORMAL MODE.
19. Conecte la alimentación de la UMX-02/0.
20. Para comprobar si la versión del fi rmware está actualizada, pulse la tecla CANCEL de la UMX-02/0 y en el display debe aparecer la nueva versión.
Figura 17
Figura 18
Esp
UMX-02/0
ESPAÑOL
16 UMX-02/0 v1.0
II. CONFIGURACIÓN
1. Generalidades
Antes de utilizar la UMX-02/0 es absolutamente necesaria su confi guración.
Ésta dependerá del número y tipo de tarjetas de la serie UMX-02/0 que la matriz tenga insertadas, así como de las características concretas de cada instalación.
Para crear o modifi car cualquier confi guración es necesario introducir previamente la clave de acceso. Para
ello, lea el apartado II. Confi guración / 5. Menú Usuario.
Es recomendable efectuar la confi guración con las distintas tarjetas colocadas en la matriz y los cables conectados.
2. Confi guración a través de PC
En instalaciones que se confi guren a través de un PC, siga el apartado II. Confi guración / 3.7. Opciones Comunes y confi gure el parámetro Direccion de la UMX-02/0. A continuación, siga el manual de confi guración del software P.A. Manager
Esp
UMX-02/0
ESPAÑOL
17UMX-02/0 v1.0
Este menú permite la confi guración de las tarjetas de entrada UMX-2E y UMX-EGC.
Tras seleccionar la opción Entradas Audio en el menú Confi guraciones, aparece una lista de 20 elementos. Cada uno representa a una de las 20 posibles entradas (una UMX-02/0 dispone de 10 espacios para tarjeta, y cada tarjeta dispone de 2 entradas).
Dirección:
Es un número comprendido entre 1 y 99 que identifi ca a cada una de las UMX-02/0 conectadas al bus RS485. Cada número es único e irrepetible para cada instalación.
Entrada física:
Número que identifi ca cada una de las entradas de audio en función de la posición que ocupa la tarjeta de entrada en la UMX-02/0. Cada UMX-02/0 dispone de 10 espacios de tarjeta, y cada tarjeta dos entradas por lo que las entradas van de la 01 a la 20.
i:
Input. Indica entrada.
Entrada lógica:
Numero entre 1 y 9999, confi gurable por el usuario, con el que se identifi cará dicha entrada en los distintos menús.
Indicador de presencia de tarjeta:
Tarjeta no presente o no detectada.
Tarjeta presente.
M E N UC o n f i g u r a c i o n e s
P r o p i e d a d e s U s u a r i o
E n t r a d a s A u d i o 0 1 0 1 _ i X X X X o
0 1 0 2 _ i X X X X o 0 1 0 3 _ i X X X X o
Dirección UMX-02/0
Entrada física
Entrada (i= input)
Entrada lógica
Indicador de pre- sencia de tarjeta
X X X X_ i X X X X o
3. Menú Confi guraciones
3.1. Acceso al menú Confi guraciones
1. Pulse la tecla MENU/OK.
2. Mediante las teclas de navegación, seleccione Confi guraciones y pulse de nuevo MENU/OK.
Desde este menú es posible acceder a los parámetros de confi guración de las Entradas de audio, Salidas de Audio, Entradas de contactos, Salidas de contactos, Grupos y Opciones Comunes.
3.2. Entradas de Audio
Esp
UMX-02/0
ESPAÑOL
18 UMX-02/0 v1.0
Numeración de las entradas de audio físicas de una UMX-02/0
3.2.1. Estructura del menú Entradas Audio
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse
3A
Fuse
3A
24V
RS-485
OUT
RS-485
OUT
RS-485
IN
RS-485
IN
OP
TIM
US
S.A
.
UMX-02/0
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
BU
SA
UD
IO
LIN
K
01030507091113151719
02040608101214161820
Figura 19
Configuraciones
MENU
Propiedades
Usuario
Entradas Audio
XX01_iXXXX o
Numero Entrada
Configuraciones
Entradas Audio
XX01_iXXXX o
XX01_iXXXX o
XX01_iXXXX o Gong
XX01_iXXXX o RP1
XX01_iXXXX o RP1 On
XX01_iXXXX o Gong
XX01_iXXXX o RP1
XX01_iXXXX o Colas
XX01_iXXXX o H./I.
Ent. Logica?
Ent. Fisica XX01
XX01_iXXX o
XX01_iXXX o
Sal./ Grupos Asoc.
Nivel Prior.
Salidas Audio
XX02_iXXXX o
Etiqueta
Pro / Pri
Programa
...
Salidas Asoc.
Prioridad
...
(0 a 63)
Off
Tonos
Personal
Reproducir Mensaje
Reproducir Gong
Una vez
Continua
Modo Reproduccion
Grabar Mensaje
Grabar Gong
Nivel Prior.
Entradas Contactos
Salidas Contactos
Grupos
Opciones comunes
XX20_iXXXX o
Gong
RP1
Colas
Habilit / Inhab.
Por defecto
Propiedades
Off
Off
Habilitada
On
On
Inhabilitada
Esp
UMX-02/0
ESPAÑOL
19UMX-02/0 v1.0
• I. Número Entrada
También llamada Entrada Lógica.
Mediante el teclado numérico, introduzca un número entre 1 y 9999.
Este número será el que identifi cará a dicha entrada en los distintos menús.
No puede haber más de una entrada lógica con el mismo número.
Pulse la tecla MENU/OK para guardar los datos.
• II. Etiqueta
La información de esta etiqueta debe rellenarse desde el ordenador de control. El texto que contiene es meramente informativo.
• III. Pro / Pri
Programa: la señal aplicada a esta entrada saldrá por las salidas de audio que tengan esta entraçda de programa asociada.
Prioridad: la señal aplicada a esta entrada saldrá por las salidas asociadas cuando se active el contacto de prioridad.
Sitúese mediante las teclas de navegación sobre Programa o Prioridad y pulse la tecla 5 para seleccionar.
La marca √ indica la confi guración actual.
Pulse la tecla MENU/OK para guardar los datos.
• IV. Salidas Asoc.
Son las salidas de audio por las que saldrá la señal aplicada a esta entrada cuando se active el contacto de prioridad.
Para asociar una salida, debe introducirse, mediante el teclado numérico, su número de salida lógica.
También es posible asociar Grupos. Para ello, debe introducirse, mediante el teclado numérico, el número de Grupo que se desee asociar. Los grupos deben ser creados anteriormente mediante el menú Grupos (véase apartado II. Confi guración / 3.6. Grupos).
Para añadir otras zonas o grupos, pulse la tecla
5 y a continuación el nombre de la zona o grupo que desee añadir (máximo 100 salidas y/o grupos asociados a una entrada).
• V. Nivel Prior.
Nivel de prioridad de cada entrada confi gurada como Prioridad respecto a las demás.
Existen 64 niveles distintos de prioridad.Máxima prioridad = 0Mínima prioridad = 63
Por defecto se establece una prioridad 5.
• VI. Gong (solamente para las entradas de la tarjeta UMX-EGC)
Permite la confi guración del gong para las entradas confi guradas como prioridad.
Off: Desactiva el preaviso.
Tonos: Activa el gong de la tarjeta.
E n t . F i s i c a 0 1 0 1E n t . L o g i c a ? _
0 1 0 3 _ i 3 E t i q u e t a S M P 9 4 R S
• 0 1 0 3 _ i 3 •P r o g r a m a
√P r i o r i d a d
• 0 1 0 3 _ i 3 S a l . / G r u p o s A s o c .1 + 0 1 + 0 7 + 4 2 + 3 _
3.2.2. Confi guración de las Entradas de AudioTras seleccionar la opción Entradas Audio en el menú Confi guraciones, seleccione la entrada que desee confi gurar mediante las teclas de navegación.
Pulse MENU/OK.
Seleccione las distintas opciones del menú mediante las teclas de navegación. Una vez seleccionada una opción, entre en ella mediante la tecla MENU/OK. Para salir de un menú pulse la tecla CANCEL.
Esp
UMX-02/0
ESPAÑOL
20 UMX-02/0 v1.0
Personal: Activa el preanuncio personalizado. Este debe ser grabado previamente. La utilización del preanuncio personalizado es inconpatible con el uso de las colas y de los mesajes pregrabados en tarjeta (RP1).
La marca √ indica la confi guración actual.
Sitúe los indicadores de posición sobre la opción que desee y pulse la tecla 5 para seleccionar.
Pulse la tecla MENU/OK para guardar los datos.
• VII. RP1 (solamente para las entradas de la tarjeta UMX-EGC).
En entradas confi guradas como prioridad, esta opción permite la grabación de un mensaje en la memoria de la tarjeta para reproducirlo cuando se quiera (activando el contacto de prioridad de la entrada de audio)
Esta opción es incompatible con la utilización de preanuncio personalizado y de cola de mesajes.
Activación / Desactivación de la función RP1:
Seleccione la opción RP1 y pulse MENU/OK.
Seleccione Off (RP1 desactivada) o On (RP1 activada) y pulse la tecla 5 para confi rmar.
La marca √ indica la confi guración actual.
Nota: Las opciones RP1 y Colas son excluyentes. Al activar la función RP1 la función de Colas queda deshabilitada.Pulse MENU/OK para confi rmar o CANCEL para descartar el cambio.
Confi guración del mensaje de RP1:
Seleccione On y pulse MENU/OK. Aparecen tres opciones:
1. Grabación del mensaje:
Conecte la fuente de audio, con un nivel de 0dB a la entrada de la tarjeta UMX-EGC siguiendo la fi gura 9.
Seleccione Grabar Mensaje y pulse MENU/OK.
Pulse de nuevo MENU/OK para iniciar la grabación.
Pulse qualquier tecla para fi nalizar la grabación.
2. Reproducción del mensaje:
Seleccione Reproducir Mensaje y pulse MENU/OK.
Sitúe el monitor en el canal indicado (mediantes las teclas CHANNEL SELECTOR) y pulse la tecla MENU/OK.
3. Modo de Reproducción:
Nota: Para modifi car y guardar los cambios sobre el modo de reproducción, la función RP1 debe estar en posición On.
Seleccione Modo Reproduccion y pulse MENU/OK.
Sitúe los indicadores de posición sobre Una vez (el mensaje se reproducirá una sola vez al activar la prioridad de entrada) o Continua (el mensaje se reproducirá continuamente mientras permanezca activa la prioridad de entrada) y pulse la tecla 5.
Pulse MENU/OK para guardar los datos.
• VIII. Colas (solamente para las entradas de la tarjeta UMX-EGC).
En entradas confi guradas como prioridad, las utilización de colas evita la pérdida de avisos cuando las salidas a las que van dirigidas un aviso están ocupadas.
El sistema graba automáticamente todos los avisos en una memoria temporal y cuando las salidas están libres, reproduce el aviso.
Esta opción es incompatible con la utilización de preanuncio personalizado y de los mesajes pregrabados en tarjeta (RP1).
Seleccione la opción Colas y pulse MENU/OK.
Seleccione Off (Cola desactivada) o On (Cola
A t e n c i o nL a f u n c i o n d e C o l a s
se inhabilitaraOK CANCEL
Figura 20
Pin number 1: SIGNAL H
Pin number 2: SIGNAL C
Pin number 8: GND
1
8
0103_i3 RP1Grabar Mensaje
Reproducir Mensaje Modo Reproduccion
0103_i3 RP1 Grabar Mensaje
Reproducir Mensaje Modo Reproduccion
0 1 0 3 _ i 3 R P 1 G r a b a r M e n s a j e R e p r o d u c i r Mensaje
Modo reproduccion
Esp
UMX-02/0
ESPAÑOL
21UMX-02/0 v1.0
activada) y pulse la tecla 5 para confi rmar.
La marca √ indica la confi guración actual.
Pulse la tecla MENU/OK para guardar los datos.
• IX. Habilit/Inhab.
Seleccione la opción Habilit / Inhab. y pulse MENU/OK.
Seleccione Habilitada o Inhabilitada y pulse la tecla 5 para confi rmar.
La marca √ indica la confi guración actual.
Pulse la tecla MENU/OK para guardar los datos.
• X. Por defecto
Restablece las confi guraciones de la entrada por defecto:
Número Entrada: No varía.
Etiqueta: Sin etiqueta
Pro / Pri : Programa
Salidas Asoc.: Ninguna
Nivel Prior.: 5
Gong: Off
Colas: Off
Habilit/Inhab.: Inhabilitada
RP1: Off
Seleccione la opción Por defecto y pulse MENU/OK.
Pulse la tecla MENU/OK para guardar los datos.
Pulse CANCEL para salir del menú sin aplicar las confi guraciones por defecto.
• XI. Propiedades
Permite visualizar todas las confi guraciones de la entrada.
Seleccione Propiedades y pulse MENU/OK.
Utilice las teclas de navegación para ver las distintas confi guraciones de la entrada de audio.
Pulse CANCEL para volver al menú.
Esp
UMX-02/0
ESPAÑOL
22 UMX-02/0 v1.0
Este menú permite la confi guración de las tarjetas de salida UMX-2S.
Tras seleccionar la opción Salidas Audio en el menú Confi guraciones, aparece una lista de 20 elementos. Cada uno representa a una de las 20 posibles salidas (una UMX-02/0 dispone de 10 espacios para tarjeta, y cada tarjeta UMX-2S dispone de 2 salidas).
Dirección:
Es un número comprendido entre 1 y 99 que identifi ca a cada una de las UMX-02/0 conectadas al bus RS485. Cada número es único e irrepetible para cada instalación.
Salida física:
Número que identifi ca cada una de las salidas de audio en función de la posición que ocupa la tarjeta UMX-2S en la UMX-02/0. Cada UMX-02/0 dispone de 10 espacios de tarjeta, y cada tarjeta dos entradas por lo que las salidas van de la 01 a la 20.
o:
Output. Indica salida.
Salida lógica:
Número entre 1 y 9999, confi gurable por el usuario, con el que se identifi cará dicha salida en los distintos menús.
Indicador de presencia de tarjeta:
Tarjeta no presente o no detectada
Tarjeta presente
S a l i d a s A u d i o 0 1 0 1 _ o X X X X o
0 1 0 2 _ o X X X X o 0 1 0 3 _ o X X X X o
X X X X_o X X X X o
Dirección UMX-02/0
Salida física
Salida (o= output)
Salida lógica
Indicador de pre- sencia de tarjeta
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse
3A
Fuse
3A
24V
RS-485
OUT
RS-485
OUT
RS-485
IN
RS-485
IN
OP
TIM
US
S.A
.
UMX-02/0
BU
SA
UD
IO
LIN
K
01030507091113151719
02040608101214161820
Figura 21
Numeración de las salidas físicas de una UMX-02/0
3.3. Salidas Audio
Esp
UMX-02/0
ESPAÑOL
23UMX-02/0 v1.0
Configuraciones
MENU
Propiedades
Usuario
Entradas Audio
XX01_oXXXXo
Numero Salida
Configuraciones
Salidas Audio
XX01_oXXXX o H./I.
XX01_oXXXXo
XX01_oXXXX o Vol. P
XX01_oXXXX o Vol. P
XX01_oXXXX o Avanza
XX01_oXXXX o i...
Ecualizaciones H./I.
Numero Entrada?
Graves Programa?
Graves?
Graves Prioridad?
Agudos Programa?
Agudos?
Agudos Prioridad?
Volumen Programa?
Volumen?
Volumen Prioridad?
Inc/Dec Programa?
Inc/Dec Prioridad?
Sal. Logica?
Numero Entrada?
Numero Entrada?
XX01_oXXXX o Nueva
XX01_oXXXX o
XX01_oXXXX o i..
XX01_oXXXX o
XX01_oXXXX o
XX01_oXXXX o i..
XX01_oXXXX o
XX01_oXXXX o
XX01_oXXXX o i..
XX01_oXXXX o
XX01_oXXXX o
XX01_oXXXX o
Sal. Fisica XX01
XX01_oXXXX o Modif.
XX01_oXXXX o Borrar
XX01_oXXXX o
XX01_oXXXX o Volume
XX01_oXXXX o
Entrada Asoci.?
Salidas Audio
XX02_oXXXXo
Etiqueta
Volumen Vol. Prog.
Volumen
Volumen
Nuevo
Volumen
Ec. ...
.. dB
.. dB
.. dB
.. dB
.. dB
.. dB
..
..
..
..
..
...
Ec. ...
Ec. ...
i...
i...
i...
Entrada Asoc. Vo. Prio.
...
Graves
Graves
Modificar
Graves
Avanzadas
Agudos
Agudos
Borrar
Agudos
Inc/Dec Volumen
Inc/Dec Volumen
Lista
Habilit/Inhab.
Eliminar
Habilit / Inhab.
Entradas Contactos
Salidas Contactos
Grupos
Opciones comunes
XX20_oXXXXo
Por defecto
Propiedades
Habilitada
Habilitada
Inhabilitada
Inhabilitada
3.3.1. Estructura del menú Salidas Audio
Esp
UMX-02/0
ESPAÑOL
24 UMX-02/0 v1.0
• I. Numero Salida
También llamada Salida Lógica. Mediante el teclado numérico, introduzca un número entre 1 y 9999.
Este número será el que identifi cará a esta salida en los distintos menús.
No puede haber más de una salida lógica con el mismo número.
Pulse la tecla MENU/OK para guardar los datos.
• II. Etiqueta
La información de esta etiqueta debe rellenarse desde el ordenador de control. El texto que contiene es meramente informativo.
• III. Volumen
Entre en el menú de volumen seleccionando la opción Volumen y pulsando la tecla MENU/OK.
1. Volumen Programa (Vol. Prog.)
Entre en el menú de volumen de programa seleccionando la opción Vol. Prog. y pulsando la tecla MENU/OK.
Desde este menú se confi guran los parámetros de volumen de programa:
• Volumen
• Graves
• Agudos
• Inc./Dec Volumen
Volumen:
Seleccione la opción Volumen y pulse MENU/OK.
Existen un total de 33 posiciones de volumen.
0 = Volumen cerrado
32= Máximo volumen (0dB de salida).
Modifi que el volumen mediante las teclas de navegación.
Pulse la tecla MENU/OK para guardar.
Graves:
Seleccione la opción Graves y pulse MENU/OK.
Mediante las teclas de navegación, ajuste el nivel de graves entre ±10 dB.
Pulse la tecla MENU/OK para guardar.
Agudos:
Seleccione la opción Agudos y pulse MENU/OK.
Mediante las teclas de navegación, ajuste el nivel de agudos entre ±10 dB.
Pulse la tecla MENU/OK para guardar.
Incremento/Decremento Volumen:
Este parámetro permite incrementar o decrementar el volumen al activar un contacto de entrada.
Seleccione la opción Inc/Dec Volumen y pulse MENU/OK.
S a l . F i s i c a 0 1 0 1S a l . L o g i c a ? _
0 1 0 3 _ o 3 E t i q u e t a Z o n a 3
0 1 0 3 _ o 3 V o l . P r o g . V o l u m e n
G r a v e s A g u d o s
0 1 0 3 _ o 3 V o l . P r o g .V o l u m e n
G r a v e s A g u d o s
V o l u m e n G r a v e s A g u d o s
I n v / D e c V o l u m e n
0 1 0 3 _ o 3 V o l . P r o g . V o l u m e n G r a v e s
A g u d o s
3.3.2. Confi guración de las Salidas de Audio
Tras seleccionar la opción Salidas Audio en el menú Confi guraciones, seleccione la salida que desee confi gurar mediante las teclas de navegación.
Pulse MENU/OK.
Seleccione las distintas opciones del menú mediante las teclas de navegación. Una vez seleccionada una opción, entre en ella mediante la tecla MENU/OK. Para salir de un menú pulse la tecla CANCEL.
Esp
UMX-02/0
ESPAÑOL
25UMX-02/0 v1.0
Mediante las teclas de navegación, ajuste el incremento (de 1 a 32) o decremento (de –1 a –32) de volumen. Hay que tener en cuenta que los valores de volumen oscilan entre 0 (volumen cerrado) y 32 (máximo volumen).
Pulse la tecla MENU/OK para guardar.
Si requiere esta funcionalidad es necesario confi gurar un contacto de la tarjeta UMX-EC con la funcionalidad Inc/Dec Volumen (vea el apartado II. Confi guración / 3.4. Entradas de contactos), asociando el contacto a esta salida para que, al detectar su activación, se efectúe el incremento o decremento de volumen.
2. Volumen Prioridad (Vol. Prio.)
Desde este menú se confi guran los parámetros de volumen de prioridad: Volumen, graves, agudos y Inc / Dec volumen.
Entre en el menú de volumen de prioridad seleccionando la opción Vol. Prio. y pulsando la tecla MENU/OK.
Las opciones de confi guración son las mismas que las del volumen de programa, sólo que en este caso afectan al volumen de prioridad.
3. Avanzadas
Permite confi gurar los parámetros de volumen de prioridad de una salida (volumen, graves y agudos) en función de la entrada generadora del aviso. De este modo, una salida puede tener distintas ecualizaciones en función de la entrada de audio utilizada.
Para entrar en el menú seleccione Avanzadas y pulse la tecla MENU/OK.
Aparecen cuatro opciones:
• Nuevo
• Modifi car
• Borrar
• Lista
Nuevo
A través de este menú se crean nuevas ecualizaciones. Cada ecualización pertenece a una entrada distinta.
1. Seleccione Nuevo y pulse MENU/OK.
2. Introduzca el número de la entrada que desee ecualizar y pulse MENU/OK.
3. Seleccione el parámetro que desee confi gurar y pulse la tecla MENU/OK.
4. Para modifi car un valor utilice las teclas de navegación.
• Volumen: Establece un volumen entre 0 y 32.
• Graves: Ajuste el nivel de Graves entre ±10 dB.
• Agudos: Ajuste el nivel de agudos entre ±10 dB
• Habilit/Inhab.: Activa (habilitada) o desactiva (inhabilitada) una ecualización.
• Eliminar: Elimina la ecualización.
5. Pulse MENU/OK para guardar los datos o CANCEL para salir sin guardar.
Modifi car
Modifi ca los parámetros de una ecualización creada anteriormente.
1. Seleccione Modifi car y pulse MENU/OK.
2. Introduzca el número de la entrada que desea modifi car y pulse MENU/OK.
3. Seleccione el parámetro que desee modifi car (Volumen, Agudos, Graves, Habilit/Inhab., Eliminar ) y pulse la tecla MENU/OK.
4. Para modifi car un valor utilice las teclas de navegación.
5. Pulse MENU/OK para guardar los datos o CANCEL para salir sin guardar.
Borrar
Permite eliminar la ecualización de una entrada determinada.
1. Seleccione Borrar y pulse MENU/OK.
2. Introduzca el número de la entrada a la que desea eliminar la ecualización y pulse MENU/OK.
0 1 0 3 _ o 3 V o l u m e n V o l . P r o g .
V o l . P r i o . A v a n z a d a s
Esp
UMX-02/0
ESPAÑOL
26 UMX-02/0 v1.0
Lista
Permite visualizar todas las entradas que tienen una ecualización para esta salida.
Desde este menú, también es posible modifi car o eliminar una ecualización determinada.
Para ello, seleccione una entrada de la lista, pulse la tecla MENU/OK y modifi que el parámetro que desee (Volumen, Agudos, Graves, Habilit/Inhab. y Eliminar ).
Para modifi car un valor utilice las teclas de navegación.
Pulse MENU/OK para guardar los datos o CANCEL para salir sin guardar.
• IV. Entrada Asoc.
La entrada asociada debe ser una entrada de programa (normalmente música).
La señal aplicada a la entrada asociada estará presente en la salida mientras la salida este en reposo (mientras no se active la prioridad de dicha salida).
1. Seleccione Entrada Asoc.
2. Pulse MENU/OK.
3. Introduzca el número de la entrada que desee asociar (número de entrada lógica).
• V. Habilit/Inhab.
Habilita o inhabilita la salida.
Sitúese sobre la opción que desee y pulse la tecla
5 para seleccionar.
La marca √ indica la confi guración actual.
Pulse la tecla MENU/OK para guardar los datos.
• VI. Por defecto
Restablece las confi guraciones de la salida por defecto:
Número Salida: No varía.
Etiqueta: Sin etiqueta
Volumen de Programa: 15
Volumen de Prioridad: 15
Agudos de programa: 0
Graves de programa: 0
Graves de prioridad: 0
Agudos de prioridad: 0
Entrada asociada: Ninguna
Habilit/Inhab. Inhabilitada
Ecualizaciones: Ninguna
Pulse la tecla MENU/OK para restablecer las confi guraciones por defecto o CANCEL para salir del menú sin aplicar cambios.
• VII. Propiedades
Permite visualizar todas las confi guraciones de la salida.
Pulse las teclas de navegación para ir visualizando las distintas confi guraciones.
Pulse CANCEL para volver al menú.
0103_o3 En t rada Asoc i . ? 1
Esp
UMX-02/0
ESPAÑOL
27UMX-02/0 v1.0
E n t r a d a s C o n t a c t o s C a r t a 1 o
C a r t a 2 o C a r t a 3 o
C a r t a 1 o E C C o n t a c t o 1
C o n t a c t o 2 C o n t a c t o 3
Car ta 1 o
Número de la tarjeta UMX-ECT en la UMX-02/0
Indicador de presencia de tarjeta
Tarjeta no presente o no detectada
Tarjeta presente
Numeración de las cartas UMX-ECT en una UMX-02/0, vista posterior.
Figura 22
Car
ta 9
Car
ta 7
Car
ta 5
Car
ta 8
Car
ta 1
0
Car
ta 3
Car
ta 2
Car
ta 1
Car
ta 4
Car
ta 6
73
80
65
72
57
64
49
56
41
48
33
40
25
32
17
24
9
16
1
8
aaaaaaaaaaTX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse
3A
Fuse
3A
24V
RS-485
OUT
RS-485
OUT
RS-485
IN
RS-485
IN
OP
TIM
US
S.A
.
UMX-02/0
BU
SA
UD
IO
LIN
K
CONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECT
3.4. Entradas de contactos
Este menú permite la confi guración de las tarjetas de entrada de contactos UMX-ECT.
Tras seleccionar la opción Entradas Contactos mediante las teclas de navegación, pulse MENU/OK.
En el menú Confi guraciones, aparece una lista de 11 elementos. Cada uno de los diez primeros representa a una de las 10 posibles tarjetas de contactos que puede contener una UMX-02/0.
La opción Por defecto inhabilita todos los contactos de entrada de todas las tarjetas UMX-ECT de la UMX-02/0.
Escoja la tarjeta que desee confi gurar en función de su posición en la UMX-02/0 y pulse MENU/OK.
Una vez seleccionada la tarjeta, escoja el contacto que desee confi gurar y pulse de nuevo MENU/OK. Cada tarjeta dispone de 8 contactos.
Confi gure las distintas opciones del menú siguiendo el apartado II. Confi guración / 3.4.2 Confi guración de las Entradas de Contactos.
La opción Por defecto inhabilita todos los contactos de entrada de la tarjeta UMX-ECT.
Esp
UMX-02/0
ESPAÑOL
28 UMX-02/0 v1.0
• I. Número de contacto de entrada
Seleccione Numero Ct Entrada y pulse MENU/OK.
Mediante el teclado numérico, introduzca un número entre 1 y 9999.
Este número será el que identifi cará a este contacto de entrada en los distintos menús.
No puede haber más de un contacto de entrada con el mismo número.
Por defecto, la UMX-02/0 numera los contactos de la tarjeta UMX-ECT a partir de 10001.
Pulse la tecla MENU/OK para guardar los datos.
• II. Etiqueta
La información de esta etiqueta debe rellenarse desde el ordenador de control. El texto que contiene es meramente informativo.
• III. Funcionalidad
Permite confi gurar la función del contacto de entrada.
Seleccione Funcionalidad y pulse MENU/OK.
Escoja una de las opciones y pulse MENU/0K.
1. Inhabilitada.
2. Selección Entrada.
3. Aviso Viva Voz.
4. Notifi cación PC.
5. Inc/Dec Volumen.
Estas opciones son excluyentes entre ellas.
1. Inhabilitada
Permite desactivar la funcionalidad de una contacto.
Para ello, seleccione la opción Inhabilitada y pulse la tecla 5 .
La marca √ indica funcionalidad del contacto deshabilitada.
Configuraciones
MENU
Propiedades
Usuario
Entradas Audio
Carta 1 o Contacto 1
Contacto 2
Contacto 3
Contacto 4
Contacto 5
Contacto 6
Contacto 7
Contacto 8
Configuraciones
Entradas Contactos Carta 1 o EC
Número entrada
Sal./Grupos Asoc.
Carta 1 o EC Ct1
Carta 1 o EC Ct1
Carta 1 o EC Ct1
Carta 1 o EC Ct1
Carta 1 o EC Ct1 Carta 1 o EC Ct1
Carta 1 o EC Ct1
Carta 1 o EC Ct1
Entrada Asoci.?
Nivel Prior.
Sal./ Grupos Asoc.?
Carta 1 o EC Ct1
Gong
Salidas Audio
Carta 2 o
Carta 3 o
Carta 4 o
Carta 5 o
Carta 6 o
Carta 7 o
Carta 8 o
Carta 9 o
Numero Ct Entrada
Inhabilitada
Entrada
Entrada
Off
...
...
Etiqueta
Selección Entrada
Salidas ...
(0 a 63)
...Salidas
Tonos
Nivel Prioridad
Personal
Gong
Funcionalidad
Aviso Viva Voz
Notificación PC
Inc/Dec Volumen
Entradas Contactos
Salidas Contactos
Grupos
Opciones comunes
Por defecto
Carta 10 o
Por defecto
Entradas Audio
C a r t a s 1 o E C C t 1N u m e r o E n t r a d a . 1 _
C a r t a 1 o E C C t 1 E t i q u e t a
3.4.1. Estructura del menú Entradas Contactos
3.4.2. Confi guración de las Entradas de Contactos
Esp
UMX-02/0
ESPAÑOL
29UMX-02/0 v1.0
2. Selección Entrada
Se defi nen una entrada de audio y unas salidas de audio.
Al activar la entrada de contacto y la prioridad de la entrada de audio, se envía el aviso a las salidas de audio.
• Entrada: Introduzca el número de entrada donde se ha conectado la fuente generadora del mensaje.
Pulse MENU/OK para guardar los datos.
• Salidas: Introduzca el nombre de la salida o grupo de salidas a donde se enviará el mensaje. Para añadir otras salidas o grupos, pulse la tecla 5 y a continuación el nombre de la salida o grupo que desee añadir (máximo 100 salidas y/o grupos).
Pulse MENU/OK para guardar los datos.
En el apartado II. Confi guración / 7.2. puede verse un ejemplo típico de instalación con micrófono con selección de zonas.
3. Aviso Viva Voz
Se defi nen una entrada de audio y unas salidas de audio.
Al activar la entrada de contacto se envía el aviso a las salidas de audio. A diferencia de la confi guración anterior, no es necesario activar la prioridad de la entrada de audio.
• Entrada: Debe introducir, mediante el teclado numérico, el número de entrada donde se ha conectado la fuente generadora del mensaje.
Pulse MENU/OK para guardar los datos.
• Salidas: Introduzca el nombre de la salida o grupo de salidas a donde se enviará el mensaje. Para añadir otras salidas o grupos, pulse la tecla 5 y a continuación el nombre de la salida o grupo que desee añadir (máximo 100 salidas y/o grupos).
Pulse MENU/OK para guardar los datos.
• Nivel Prior.: Establece el nivel de prioridad, tal y como se hace al confi gurar una entrada de audio.
Existen 64 niveles distintos de prioridad.
Máxima prioridad = 0
Mínima prioridad = 63
Por defecto se establece una prioridad 5.
• Gong: Permite confi gurar el gong (siempre y cuando la entrada de audio pertenezca a una tarjeta UMX-EGC).
- Off: Desactiva el preaviso.
- Tonos: Activa el gong de la tarjeta.
- Personal: Activa el preanuncio personalizado. Este debe ser grabado previamente. La utilización del preanuncio personalizado es incompatible con el uso de las colas y de los mesajes pregrabados en tarjeta (RP1).
Sitúe los indicadores de posición sobre la opción que desee y pulse la tecla 5 para seleccionar.
La marca √ indica la confi guración actual.
Pulse la tecla MENU/OK para guardar los datos.
4. Notifi cación PC
Notifi ca cualquier variación del estado del contacto al ordenador de control.
Para ello, la UMX-02/0 y el PC deben estar conectados mediante el bus RS485.
5. Inc/Dec Volumen
Introduzca el número que corresponda a las salidas o grupos que desee que modifi quen el volumen al cerrar la entrada de contacto. Estas salidas adoptarán el volumen defi nido al confi gurar el incremento/decremento de volumen de las salidas de audio.
Estas confi guraciones no modifi can la confi guración de la entrada de audio.
Esp
UMX-02/0
ESPAÑOL
30 UMX-02/0 v1.0
Sa l i das Con tac tos Ca r ta 1 o
Ca r ta 2 o Ca r ta 3 o
Car ta 1 o
Número de la tarjeta UMX-SCT en la UMX-02/0
Indicador de presencia de tarjeta
Tarjeta no presente o no detectada
Tarjeta presente
Numeración de las cartas UMX-SCT en una UMX-02/0, vista posterior.
Figura 23
73
80
65
72
57
64
49
56
41
48
33
40
25
32
17
24
9
16
1
8
aaaaaaaaaaTX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse
3A
Fuse
3A
24V
RS-485
OUT
RS-485
OUT
RS-485
IN
RS-485
IN
OP
TIM
US
S.A
.
UMX-02/0
BU
SA
UD
IO
LIN
K
CONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCT
Car
ta 9
Car
ta 7
Car
ta 5
Car
ta 8
Car
ta 1
0
Car
ta 3
Car
ta 2
Car
ta 1
Car
ta 4
Car
ta 6
Car ta 1 o SC Con tac to 1
Con tac to 2 Con tac to 3
3.5. Salidas de Contactos
Este menú permite la confi guración de las tarjetas de salida de contactos UMX-SCT.
Tras seleccionar la opción Salidas Contactos mediante las teclas de navegación, pulse MENU/OK.
Aparece un menú con 11 elementos. Los diez primeros representa a cada una de las 10 posibles tarjetas de contactos que puede contener una UMX-02/0.
La opción Por defecto inhabilita todos los contactos de salida de todas las tarjetas UMX-SCT de la UMX-02/0.
Escoja la tarjeta que desee confi gurar en función de su posición en la UMX-02/0 y pulse MENU/OK.
Una vez seleccionada la tarjeta, escoja el contacto que desee confi gurar y pulse de nuevo MENU/OK. Cada tarjeta dispone de 8 contactos.
La opción Por defecto inhabilita todos los contactos de salida de la tarjeta.
Confi gure las distintas opciones del menú siguiendo el apartado II. Confi guración / 3.5.2 Confi guración de las salidas de contactos.
Esp
UMX-02/0
ESPAÑOL
31UMX-02/0 v1.0
• I. Número de contacto de salida
Seleccione Numero Ct Salida y pulse MENU/OK.
Mediante el teclado numérico, introduzca un número entre 1 y 9999.
Este número será el que identifi cará a este contacto de salida en los distintos menús.
No puede haber más de un contacto de salida con el mismo número.
Por defecto, la UMX-02/0 numera los contactos de la tarjeta UMX-SCT a partir de 10001.
Pulse la tecla MENU/OK para guardar los datos.
• II. Etiqueta
La información de esta etiqueta debe rellenarse desde el ordenador de control.
El texto que contiene es meramente informativo.
• III. FuncionalidadPermite confi gurar la función del contacto de entrada.
seleccione Funcionalidad y pulse MENU/OK.
Mediante las teclas de selección, escoja una de las opciones y pulse MENU/0K.
1. Inhabilitada.
2. Grupos.
3. Eventos.
4. Activado por PC.
La selección de cualquiera de las opciones excluye las otras.
1. Inhabilitada
Permite desactivar la funcionalidad del contacto.
Para ello, seleccione la opción Inhabilitada y pulse la tecla 5.
La marca √ indica funcionalidad del contacto deshabilitada.
Configuraciones
MENU
Propiedades
Usuario
Entradas Audio
Carta 1 o Contacto 1
Contacto 2
Contacto 3
Contacto 4
Contacto 5
Contacto 6
Contacto 7
Contacto 8
Configuraciones
Salidas Contactos Carta 1 o SC
Número Salida
Carta 1 o SC Ct1Carta 1 o SC St1
Carta 1 o SC Ct1
Carta 1 o SC Ct1
Carta 1 o SC Ct1
Numero del Grupo?
Entrada?
Carta 1 o SC Ct1
Carta 1 o SC Ct1 EI
Carta 1 o SC Ct1 EF
Salidas Audio
Carta 2 o
Carta 3 o
Carta 4 o
Carta 5 o
Carta 6 o
Carta 7 o
Carta 8 o
Carta 9 o
Numero Ct Salida
Inhabilitada Evento Inicio
Inhabilitada
Inhabilitada
...Etiqueta
Grupos
...
...
Evento Final
Inicio Gong
Final GongEntrada
Inicio Mensaje
Final Mensaje
Funcionalidad
Eventos
Acrtivado por PC
Entradas Contactos
Salidas Contactos
Grupos
Opciones comunes
Por defecto
Carta 10 o
Por defecto
Entradas Audio
Entradas Contactos
C a r t a s 1 o S C C t 1 N u m e r o S a l i d a 1 _
C a r t a 1 o S C C t 1 E t i q u e t a
3.5.1. Estructura del menú Salidas Contactos
3.5.2. Confi guración de las Salidas de Contactos
Esp
UMX-02/0
ESPAÑOL
32 UMX-02/0 v1.0
2. Grupos
El contacto de salida se activará al seleccionar un grupo determinado. Esta selección se produce, por ejemplo, al activar una entrada de audio que tenga a ese grupo asociado.
Para confi gurar esta opción, seleccione Grupos y pulse MENU/OK.
Introduzca el número del grupo cuya selección activa el contacto de salida.
Pulse la tecla MENU/OK para guardar los datos.
Pulse la tecla 5 para habilitar esta opción.
En el apartado II. Confi guración / 7.1. muestra un diagrama de bloques típico de esta funcionalidad, como sería la creación de subzonas.
3. Eventos
El contacto de salida se activará en función de la detección de un evento de inicio (Inicio Gong o Inicio Mensaje) en una entrada determinada, y se desactivará en función de un evento fi nal (Final Gong o Final Mensaje).
Para confi gurar los eventos, seleccione eventos y pulse MENU/OK.
• Confi guración de Evento Inicio
Seleccione Evento Inicio y pulse MENU/OK.
- Inhabilitada. No detecta evento alguno.
- Inicio Gong. El contacto se activa al iniciarse el Gong en una entrada predeterminada.
- Inicio Mensaje. El contacto se activa al iniciar el mensaje una entrada predeterminada.
• Confi guración de Evento Final
- Inhabilitada. No detecta evento alguno.
- Final Gong. El contacto se desactiva al fi nalizar el Gong en una entrada predeterminada.
- Final Mensaje. El contacto se desactiva al fi nalizar el mensaje en una entrada predeterminada.
• Confi guración de Entrada
Establece el número de entrada cuyo gong o mensaje actúa de evento de inicio y fi nal.
Una vez confi gurados los eventos de inicio, evento fi nal y entrada, pulse CANCEL para regresar al menú de confi guración del contacto.
Pulse la tecla 5 para habilitar la confi guración de contacto de salida por eventos.
4. Activado por PC
En este caso, el PC de control activa y/o desactiva el contacto de salida.
Seleccione Activado por PC y pulse la tecla
5 .
C a r t a 1 o S C C t 1 Inhabilitada Grupos
Eventos
C a r t a 1 o S C C t 1 Numero del grupo? 0_
Esp
UMX-02/0
ESPAÑOL
33UMX-02/0 v1.0
1. Seleccione la opción Grupos en el menú Confi guraciones.
2. Pulse MENU/OK.
3. Seleccione una de las opciones:
I. Nuevo
II. Modifi car
III. Borrar
IV. Lista
• I. Creación de un grupo nuevo
1. Seleccione la opción Nuevo para crear grupos nuevos.
2. Pulse MENU/OK.
3. Introduzca un número (entre 1 y 250) para el nuevo grupo.
Este número, precedido del dígito 0, será el que identifi cará a dicho grupo en los distintos menús.
4. Pulse MENU/OK.
G r u p o sN u e v o
M o d i f i c a r B o r r a r
3.6. Grupos
Este menú permite la creación, edición o eliminación de grupos.
El sistema permite la creación de 250 grupos distintos.
Un grupo puede estar formado por otros grupos.
Cada grupo puede contener 50 elementos distintos (zonas o grupos).
3.6.1. Estructura del menú Grupos
Configuraciones
MENU
Propiedades
Usuario
Entradas Audio
Nuevo
...
...
...
...
...
...Borrar
Editar
Configuraciones
Grupos Nuevo Grupo
Modificar Grupo
Borrar Grupo
Grupo 0...
Grupo 0...
Grupo 0...Grupo 0...
Numero del Grupo?
Numero del Grupo?
Numero del Grupo?
Salidas/Grupos
Salidas/Grupos
Salidas/Grupos
Lista
Salidas Audio
Modificar
Borrar
Lista
Grupo 0...
Grupo 0...
Grupo 0...
Entradas Contactos
Grupos
Opciones comunes
Entradas Audio
Entradas Contactos
Salidas Contactos
3.6.2. Confi guración de Grupos
Esp
UMX-02/0
ESPAÑOL
34 UMX-02/0 v1.0
5. Introduzca los número de salida y / o grupos que componen el nuevo grupo.
Para ello, introduzca mediante el teclado numérico el número del primer elemento que forma el grupo (sea un número de salida u otro grupo) y pulse la tecla 5 . A continuación el segundo elemento y pulse 5 , y así sucesivamente hasta acabar la secuencia de elementos que forman el grupo.
6. Pulse MENU/OK para guardar los datos.
7. Pulse de nuevo MENU/OK para crear otro grupo o CANCEL para salir del menú.
• II. Modifi cación de un grupo
1. Desde el menú Grupos, seleccione la opción Modifi car para cambiar los elementos que forman un grupo ya existente.
2. Pulse MENU/OK.
3. Introduzca el número del grupo que desee modifi car.
4. Pulse MENU/OK.
5. Elimine o añada elementos al grupo.
a. Eliminar elementos del grupo: Utilice las teclas de navegación para mover el cursor hasta el elemento que desee eliminar y pulse la tecla DEL, eliminando los caracteres uno a uno.
b. Añadir elementos al grupo. Utilice las teclas de navegación para mover el cursor hasta la posición del grupo donde desee añadir un elemento y introduzca los datos mediante el teclado numérico.
6. Pulse MENU/OK para guardar los cambios.
7. Pulse de nuevo MENU/OK para modifi car otro grupo o CANCEL para salir del menú.
• III. Eliminación de un grupo
1. Desde el menú Grupos, seleccione la opción Borrar para eliminar un grupo.
2. Pulse MENU/OK.
3. Introduzca un número del grupo que desee eliminar.
4. Pulse MENU/OK.
5. Pulse de nuevo MENU/OK para eliminar el grupo o CANCEL para descartar la eliminación.
• IV. Lista
Esta opción permite visualizar una lista con todos los grupos existentes. Además, permite eliminar o modifi car grupos.
1. Desde el menú Grupos, seleccione la opción Lista.
2. Pulse MENU/OK.
3. Mediante las fl echas de navegación seleccione un número de grupo.
4. Pulse MENU/OK.
5. Seleccione Editar o Borrar.
a. Editar: Permite visualizar los elementos que forman el grupo o modifi car la composición del grupo.
1. Pulse MENU/OK.
2. En pantalla se visualiza la composición del grupo. Para modifi carla, siga el paso nº 5 del apartado II. Confi guración / 3.6.2. Confi guración de Grupos / II. Modifi cación de un grupo.
3. Pulse MENU/OK.
b. Borrar: Elimina el grupo seleccionado.
1. Pulse MENU/OK.
2. Pulse de nuevo MENU/OK para eliminar el grupo o CANCEL para descartar la eliminación.
6. Pulse CANCEL para salir del menú.
Esp
UMX-02/0
ESPAÑOL
35UMX-02/0 v1.0
1. Seleccione la opción Opciones Comunes en el menú Confi guraciones.
2. Pulse MENU/OK.
3. Seleccione una de las opciones:
I. Direccion
II. Bus Compartido
III. Idioma
IV. Clave Acceso
V. Duracion Avisos
• I. Direccion
Todo aparato conectado a un bus RS485 debe tener una dirección única que lo diferencie de los demás aparatos conectados al mismo bus. A través de este menú confi guramos la dirección de la UMX-02/0. Por defecto, la dirección es 1.
1. Desde el menú Opciones Comunes, seleccione la opción Direccion.
2. Pulse MENU/OK.
3. Mediante el teclado numérico, introduzca un valor entre 1 y 99.
4. Pulse MENU/OK.
Dirección ...
...
* * * * * * * * * * * *
Castellano
English
Catala
60 segundos
120 segundos
240 segundos
Ilimitado
Opciones Comunes Escriba Num. UMX:
Lista de UMX que
Clave Acceso Clave Acceso Clave Acceso
Idioma
Duracion de Avisos
comparten BUS?
Codigo Antiguo: Codigo Nuevo 1: Codigo Nuevo 2:
Bus Compartido
Idioma
Clave acceso
Duracion Avisos
Configuraciones
MENU
Propiedades
Usuario
Entradas Audio
Configuraciones
Grupos
Opciones comunes
Entradas Audio
Salidas Contactos
Salidas Audio
Entradas Contactos
C l a v e A c c e s o D u r a c i o n A v i s o s
O p c i o n e s C o m u n e sD i r e c c i o n
B u s C o m p a r t i d o I d i o m a
3.7. Opciones Comunes
3.7.1. Estructura del menú Opciones Comunes
3.7.2. Confi guración de las Opciones Comunes
Esp
UMX-02/0
ESPAÑOL
36 UMX-02/0 v1.0
• II. Bus Compartido
Siempre que varias UMX-02/0 están interconectadas entre ellas a través del conector de expansión del bus de audio, debe confi gurarse este parámetro.
1. Desde el menú Opciones Comunes, seleccione la opción Bus Compartido.
2. Pulse MENU/OK.
3. Mediante el teclado numérico, introduzca la dirección de cada una de las UMX-02/0 que comparten el bus. Pulse 5 para separar cada una de las direcciones de la siguiente.
4. Es necesario introducir también la propia dirección de la UMX-02/0 que se esta confi gurando.
5. Pulse MENU/OK.
• III. Idioma
Permite cambiar el idioma de los menús.
1. Desde el menú Opciones Comunes, seleccione la opción Idioma.
2. Pulse MENU/OK.
3. Mediante las teclas de navegación seleccione un idioma y pulse la tecla 5 .
4. Pulse MENU/OK para guardar los datos.
• IV. Clave Acceso
Utilice esta opción para cambiar la clave de acceso. El sistema permite valores de 1 a 9999.
Por defecto la clave es 1234.
1. Desde el menú Opciones Comunes, seleccione la opción Clave Acceso.
2. Pulse MENU/OK.
3. Introduzca el clave de acceso vigente y pulse MENU/OK.
4. Introduzca la nueva clave de acceso y pulse MENU/OK.
5. Introduzca otra vez la nueva clave de acceso y pulse MENU/OK.
• V. Duracion Avisos
Utilice esta opción para establecer un tiempo máximo de duración de los avisos.
1. Desde el menú Opciones Comunes, seleccione la opción Duracion Avisos.
2. Pulse MENU/OK.
3. Mediante las teclas de navegación seleccione un valor de duración máxima de los avisos y pulse la tecla 5 .
60 segundos
120 segundos
240 segundos
Ilimitada
4. Pulse MENU/OK para guardar los datos.
Esp
UMX-02/0
ESPAÑOL
37UMX-02/0 v1.0
MENU/OK
Etiqueta
Etiqueta
Etiqueta
Numeroentrada
xx01_ix
xx02_ix
xx03_ix
Numeroentrada
Numeroentrada
Programa/Prioridad
Programa/Prioridad
Programa/Prioridad
Salidasasociadas
Salidasasociadas
Salidasasociadas
Nivel deprioridad
Nivel deprioridad
Nivel deprioridad
Gong
Gong
Gong
Colas
Colas
Colas
Habilitada/Inhabilitada
Habilitada/Inhabilitada
Habilitada/Inhabilitada
4. Menu PropiedadesEste menú muestra la confi guración de la UMX-02/0.
4.1. Acceso al menú Propiedades
1. Pulse MENU/OK.
2. Mediante las teclas de navegación seleccione Propiedades y pulse MENU/OK.
Aparecen las siguientes opciones:
• Entradas Audio: Muestra las confi guraciones de las entradas de audio que están habilitadas.
• Salidas Audio: Muestra las confi guraciones de las entradas de audio que están habilitadas.
• Entradas Contactos: Muestra las confi guraciones de las entradas de contactos.
• Salidas Contactos: Muestra las confi guraciones de las salidas de contactos.
4.2. Visualizar las confi guraciones
1. Mediante las teclas de navegación seleccione una opción y pulse MENU/OK.
2. Utilice las teclas de navegación o la tecla MENU/OK para ir visualizando cada una de las confi guraciones según los diagramas de fl ujo siguientes.
3. Pulse la tecla CANCEL para salir.
Diagrama de fl ujo de las propiedades de las Entradas de Audio
Esp
UMX-02/0
ESPAÑOL
38 UMX-02/0 v1.0
Etiqueta
Etiqueta
Etiqueta
Numerosalida
xx01_ox
xx02_ox
xx03_ox
Numerosalida
Numerosalida
Volumen,graves y
agudos prog.
Volumen,graves y
agudos prog.
Volumen,graves y
agudos prog.
Volumen,graves y
agudos prior.
Volumen,graves y
agudos prior.
Volumen,graves y
agudos prior.
Entradasasociadas
Entradasasociadas
Entradasasociadas
Habilitada/Inhabilitada
Habilitada/Inhabilitada
Habilitada/Inhabilitada
Ecualiza-ciones
Ecualiza-ciones
Ecualiza-ciones
Carta 1EC Ct 1
Carta 1EC Ct 2
Carta 1EC Ct 8
EtiquetaNumeroEntrada
Funcio-nalidad
Entradaasociada
Salidas/Grupos
asociados
Nivelprioridad
Gong
EtiquetaNumeroEntrada
Funcio-nalidad
Entradaasociada
Salidas/Grupos
asociados
Nivelprioridad
Gong
EtiquetaNumeroEntrada
Funcio-nalidad
Entradaasociada
Salidas/Grupos
asociados
Nivelprioridad
Gong
Carta 1SC Ct 1
Carta 1SC Ct 2
Carta 1SC Ct 8
EtiquetaNumerosalida
Funcio-nalidad
Eventoinicio
Eventofinal
Entradaasociada
Grupo
EtiquetaNumerosalida
Funcio-nalidad
Eventoinicio
Eventofinal
Entradaasociada
Grupo
EtiquetaNumerosalida
Funcio-nalidad
Eventoinicio
Eventofinal
Entradaasociada
Grupo
Diagrama de fl ujo de las propiedades de las Salidas de Audio
Diagrama de fl ujo de las propiedades de las Entradas de contactos.
Diagrama de fl ujo de las propiedades de las Salidas de contactos.
Esp
UMX-02/0
ESPAÑOL
39UMX-02/0 v1.0
5.1. LoginPermite introducir la clave de acceso para poder modifi car las confi guraciones.
La clave por defecto es 1234. Para cambiarla utilice el menú Confi guraciones / Opciones comunes / Clave Acceso.
Seleccione Usuario
Pulse MENU/OK
Seleccione Login
Pulse MENU /OK
Introduzca la clave
1 2 3 4
Pulse MENU /OK
Pulse CANCEL para volver al menú principal
5.2. LogoutPermite desactivar el acceso a confi guraciones, una vez efectuadas las operaciones de confi guración.
Tras diez minutos sin pulsar ninguna tecla se efectúa un Logout automático.
Seleccione Usuario
Pulse MENU/OK
Seleccione Logout
Pulse MENU/OK
Pulse CANCEL para volver al menú principa
5. Menu Usuario
Configuraciones
MENU
Propiedades
Usuario
Login
Usuario
LogoutLogin
Entra Clave Acceso
* * * *
M E N U C o n f i g u r a c i o n e s P r o p i e d a d e s
U s u a r i o
U s u a r i oL o g i n
L o g o u t
L o g i nE n t r a C l a v e A c c e s o
1 2 3 4
L o g i nC l a v e A c c e s o
c o r r e c t a
M E N U C o n f i g u r a c i o n e s P r o p i e d a d e s
U s u a r i o
U s u a r i o L o g i n
L o g o u t
L o g o u t S e s i o n
F i n a l i z a d a
Esp
UMX-02/0
ESPAÑOL
40 UMX-02/0 v1.0
6. Menú Registro
Es un registro de eventos de comunicación.
Permite visualizar errores de Overrun o errores de Framing.
7. Ejemplos de confi guración. Casos prácticos
7.1. Ejemplo de instalación con subzonas
1. Confi guración de entradas de audio:
Confi guraciones / Entradas Audio /
0101_i10001 0102_i10002 0103_i10003 0104_i10004
Número Entrada 1 2 3 4
Pro / Pri Prioridad Prioridad Prioridad Programa
Salidas Asoc. 02+04+06 01+02+04+05+08 01+02+03+04+05+06+07+08 -
Nivel de Prior. 1 1 1 -
Gong On On On Off
Rp1 Off Off Off Off
Colas On* / off On* / off On* / off Off
Habilit / Inhab. Habilitada Habilitada Habilitada Habilitada
* solo en UMX-EGC
2. Confi guración de Salidas de audio:
Confi guraciones / Salidas Audio /
0105_o10005 0106_o10006
Numero Salida 1 2
Volumen ... ...
Etrada Asoc . 4 0
Habilit / Inhab. Habilitada Habilitada
3. Creación de grupos:
Confi guraciones / Grupos / Nuevo /
Número del Grupo 1 2 3 4 5 6 7 8
Salidas / Grupos 2 2 2 2 2 2 2 2
4. Confi guración de Salidas de Contactos:
Confi guraciones / Salidas Contactos / Carta 4 /
Contacto 1 Contacto 2 Contacto 3 Contacto 4 Contacto 5 Contacto 6 Contacto 7 Contacto 8
Número Ct Salida 1 2 3 4 5 6 7 8
Funcionalidad Grupos 01 Grupos 02 Grupos 03 Grupos 04 Grupos 05 Grupos 06 Grupos 07 Grupos 08
Para la creación de subzonas deben utilizarse tarjetas de contactos de salida (UMX-SCT).
Básicamente, deben crearse tantos grupos como subzonas desee tener, y asociar cada contacto de salida con uno de los grupos creados. En cada entrada deben confi gurarse como salidas asociadas los grupos que correspondan a las subzonas que cada entrada debe seleccionar.
Solo usuarios avanzados.
UMX-2E
UMX-2E
MD94/R
MD94/R
MD94
Music
program
Subzones
1, 2, 4, 5 & 8
All call
Subzones
2, 4 & 6
UMX-02/0
UMX-2S
UM
X-0
2/0
inte
rnalB
US
UMX-SCT
UP247
UP247
MC-12L
Subzone 1
Subzone 2
Subzone 3
Subzone 4
Subzone 5
Subzone 6
Subzone 7
Subzone 8
Program
amplifier
Priority
amplifier
1
2
3
4
5
6
7
8
i1
o1
i3
i2
o2
1
8
i4
Esp
UMX-02/0
ESPAÑOL
41UMX-02/0 v1.0
3.Confi guración de Entradas de Contactos:
Confi guraciones / Entradas Contactos / Carta 2 /
Contacto 1 Contacto 2 Contacto 3 Contacto 4 Contacto 5
Número Ct Entrada 1 2 3 4 5
Funcionalidad SelecciónEntrada
Entrada 1 SelecciónEntrada
Entrada 1 SelecciónEntrada
Entrada 1 SelecciónEntrada
Entrada 1 SelecciónEntrada
Entrada 1
Salida 1 Salida 2 Salida 3 Salida 4 Salida 5
UMX-2EMD-94R6
Priority activation
UMX-02/0
UMX-2S
UMX-2S
UMX-2S
UM
X-0
2/0
inte
rnalB
US
Zone 1
amplifier
Zone 3
amplifier
Zone 5
amplifier
Zone 2
amplifier
Zone 4
amplifier
UMX-ECT
Ct 1Zone 1
Ct 2Zone 2
Ct 3Zone 3
Ct 4Zone 4
Ct 5Zone 5
i1
i2
Music
program
o1
o2
o3
o4
o5
7.2. Ejemplo de instalación con micrófono con selección de zonas
1. Confi guración de entradas de audio:
Confi guraciones / Entradas Audio /
0101_i10001 0101_i10002
Número Entrada 1 2
Pro / Pri Programa Prioridad
Salidas Asoc. - 1+2+3+4+5+6
Nivel de Prior. - 1
Gong Off On
Rp1 Off Off
Colas Off On* / off
Habilit / Inhab. Habilitada Habilitada
* solo en UMX-EGC
2. Confi guración de Salidas de audio:
Confi guraciones / Salidas Audio /
0105_o10005 0106_o10006 0107_o10007 0108_o10008 0109_o10009
Número Salida 1 2 3 4 4
Volumen ... ... ... ... ...
Etrada Asoc . 1 1 1 1 1
Habilit / Inhab. Habilitada Habilitada Habilitada Habilitada Habilitada
Para la selección de zonas desde un pupitre se debe utilizar la tarjeta de contactos de entrada (UMX-ECT).
En el siguiente diagrama de bloques, un micrófono con selección de zonas activa las distintas salidas a través de los contactos de entrada de la tarjeta UMX-ECT.
Esp
UMX-02/0
ESPAÑOL
42 UMX-02/0 v1.0
8. Versiones de Software y Firmware
Las funcionalidades descritas en este manual de usuario son válidas para las versiones de software y fi rmware iguales o superiores a:
Firmware UMX-02/0 Versión 11.8
Software P.A. Manager Versión 2.5 / Revisión 3391.19997
9. Document Version Tracking
Rev Date Modifi cations Content Written by:
1.0 Marzo 10 Documento de partida: UMX-01/0 Version 1.2Actualización de UMX-01/0 a UMX-02/0 (cambio de modelo en texto y fi guras).Se añaden o modifi can los apartados siguientes:(I) 4.4. Conector download DB-9(I) 5. Características(II) 8. Versiones de Software y Firmware(II) 9. Document Version Tracking
R+DDepartment
Approved By Function Date
Ferran Gironès i Puig R+D Director 03/2010
43
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
9. Garantía1. CERTIFICADO DE GARANTÍA
1. La empresa OPTIMUS S.A. garantiza que sus productos se encuentran libres de defectos en materiales y de mano de obra en el momento de su entrega original al comprador.
2. La empresa OPTIMUS S.A. concede a sus productos, conforme a las condiciones aquí descritas, una garantía de dos (2) años a partir de la fecha de adquisición del producto por el comprador. Si, dentro de este plazo de garantía, se producen defectos que no sean debidos a razones mencionadas bajo el punto 2, la empresa OPTIMUS S.A. remplazará o reparará el aparato utilizando piezas de recambio equivalentes, nuevas o reconstruidas, según criterio propio. Si se aplican piezas de recambio que constituyen una mejora del aparato, la empresa OPTIMUS S.A. se reserva el derecho de cargar el coste adicional de estos componentes al cliente.
3. No se concederán prestaciones de garantía distintas a las citadas.
4. Para la utilización de los derechos de garantía será requisito indispensable presentar la factura de compra original o el certifi cado de garantía.
2. DISPOSICIONES DE GARANTÍA
1. Si el producto tuviera que ser modifi cado o adaptado para cumplir con los requisitos locales en cuanto a técnica o seguridad, si no se trata del país para el cual el producto fue concebido y fabricado originalmente, ello no se considera como defecto de material o de fabricación. Por lo demás, la garantía no comprende la realización de estas modifi caciones o adaptaciones, independientemente de si éstas hayan sido ejecutadas debidamente o no.
OPTIMUS S.A. tampoco asumirá costes en el marco de la garantía por este tipo de modifi caciones.
2. La garantía no dará derecho a inspección o mantenimiento gratuito o reparación del aparato, particularmente si los defectos son debidos a uso inapropiado. Los derechos de garantía tampoco abarcan defectos en piezas de desgaste que sean debidos a un desgaste normal. Piezas de desgaste son, en particular, potenciómetros, interruptores/teclas, y piezas similares.
3. La garantía no abarca los defectos en el equipo causados por:
● Abuso o uso incorrecto del aparato para fi nes distintos a los previstos, en incumplimiento de las instrucciones de servicio y de mantenimiento especifi cadas en el Manual y/o Instrucciones Técnicas del equipo.
● Conexión o uso del producto de una manera que no corresponda a los requisitos técnicos o de seguridad del país en el cual se utiliza el aparato.
● Instalación en condiciones distintas a los indicados en el Manual y/o Instrucciones Técnicas.
● Defi ciencia o interrupciones tensión eléctrica o defectos de instalación que impliquen uso en condiciones anormales.
● Daños ocasionados por otros equipos interconectados al producto.
● El uso o instalación de Software (programas), interfaces, partes o suministros no proporcionados y/o autorizados por OPTIMUS S.A.
● La no utilización de los embalajes originales para su transporte.
● Daños causados por fuerza mayor u otras causas no imputables a OPTIMUS S.A.
4. No están cubiertos por esta garantía los siguientes elementos:
● Todas las superfi cies de plástico y todas las piezas expuestas al exterior que hayan sido rayadas o dañadas debido al uso normal o anormal.
● Las roturas, golpes, daños por caídas o ralladuras causadas por traslados de cualquier naturaleza.
● Defectos de daños derivados de pruebas, uso, mantenimiento, instalación y ajustes inapropiados, o derivados de cualquier alteración o modifi cación de cualquier tipo no realizada por en Servicio Autorizado por OPTIMUS S.A. en cumplimiento de esta garantía.
● Los daños personales o a la propiedad que pudieran causar el uso indebido del equipo, incluyendo la falta de mantenimiento.
5. La garantía carecerá de validez cuando se observe:
● Enmiendas o tachaduras en los datos del certifi cado de garantía o factura de compra.
● Falta de factura original o falta de fecha en la misma.
● Falta de número de serie o lote en el equipo.
6. En el caso de ordenadores PC, la garantía no cubrirá la eliminación de virus informáticos, restauración de programas por este motivo o la reinstalación del disco provocada por el borrado del mismo.
7. Los derechos de garantía se anulan si el producto ha sido reparado o abierto por un personal no autorizado OPTIMUS S.A. o por el propio
cliente.
8. Si la empresa OPTIMUS S.A. estableciera al comprador del aparato que los daños presentados no dan derecho a la reclamación de la garantía, los costes de las prestaciones de revisión por parte de la empresa OPTIMUS S.A. correrán a cargo del diente.
9. Los productos sin derechos de garantía sólo se repararán contra pago de los gastos por el cliente. En caso de ausencia de derechos de garantía, OPTIMUS S.A. informará al cliente al respecto. Si, en un plazo de 6 semanas a partir de esta comunicación, no recibimos ninguna orden de reparación escrita confi rmando la aceptación de los gastos, OPTIMUS S.A. devolverá el aparato en cuestión al cliente. En este caso, los gastos de transporte y embalaje se facturarán por separado y se cobrarán contra reembolso. En caso de expedición de una orden de reparación, confi rmando la asunción de los gastos, los gastos de transporte y de embalaje se facturarán adicionalmente, igualmente por separado.
10. En caso de necesidad de traslado al Centro de Servicio Autorizado, el transporte será realizado por el responsable de la garantía, y serán a su cargo los gastos de fl ete y seguro.
11. En caso de falla, OPTIMUS S.A. asegura al comprador la reparación y/o reposición de partes para su correcto funcionamiento en un plazo no mayor a 30 días. No obstante, se deja aclarado que el plazo usual no supera los 30 días.
12. Todas las piezas o productos sustituidos al amparo de los servicios en garantía pasarán a ser propiedad de OPTIMUS S.A.
3. TRANSFERENCIA DE LA GARANTÍA
La garantía se concede únicamente para el comprador original (cliente principal) y es intransferible. Con excepción de la empresa OPTIMUS S.A., ningún tercero (comerciantes, etc.) está autorizado a conceder garantía adicionales en nombre de la empresa OPTIMUS S.A.
4. RECLAMACIONES POR DAÑOS Y PERJUICIOS
En caso de que OPTIMUS S.A. no pueda proporcionar un servicio de garantía adecuado, el comprador no tendrá ningún derecho a reclamar indemnización alguna por daños y perjuicios consecuentes. La responsabilidad de la empresa OPTIMUS S.A. se limita en todo caso al precio de facturación del producto
5. RELACIÓN CON OTROS DERECHOS DE GARANTÍA Y CON EL DERECHO NACIONAL
1. Mediante esta garantía no se afecta a los derechos del comprador frente al vendedor deducidos del contrato de compraventa concluido.
2. Las presentes condiciones de garantía de la empresa OPTIMUS S.A. son válidas siempre que no contradigan el derecho nacional correspondiente en relación con las disposiciones de garantía.
3. OPTIMUS S.A. asegura que este producto cumple con las normas de seguridad vigentes en el país.
ESTA DECLARACIÓN DE GARANTÍA LIMITADA ES LA GARANTÍA EXCLUSIVA OFRECIDA POR OPTIMUS S.A. SE EXCLUYE TODA OTRA GARANTÍA EXPLÍCITA O IMPLÍCITA, INCLUIDAS LAS GARANTÍAS DE COMERCIALIDAD Y APTITUD A UN FIN DETERMINADO. (EXCEPTO CUANDO DICHAS GARANTÍAS SEAN REQUERIDAS POR UNA LEY APLICABLE). NINGUNA GARANTÍA, YA SEA EXPLÍCITA O IMPLÍCITA, SE APLICARÁ TRAS LA FINALIZACIÓN DEL PERIODO DE GARANTÍA.
OPTIMUS S.A.
Servicio Post Venta
C/ Barcelona 101
17003 - GIRONA
Tel. 902 151 96 / 972 203 300
Fax. 972 21 84 13
e-mail : [email protected] 1999/44/CE
44
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
I. DESCRIPTION AND CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
1. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
2. Power and control module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
2.1. Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
2.2. Connection of the RS-485 input and output . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
2.2.1. Interconnection of various equipment units (UMX-02/0, DALA01/0B, MD-500EM...) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
2.2.2. Interconnection of the UMX-02/0 and the RS-485 card of the PC . . . . . . . .49
2.3. Connection of the ground connection to the chassis . . . . . . . . . . . . . . . . . . . . . . .49
3. Expansion of the UMX-02/0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
4. Front controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
4.1. Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
4.1.1. Channel selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
4.1.2. Monitoring volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
4.1.3. Channel level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
4.2. Navigation, menu access and data entry keys . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4.2.1. Navigation keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4.2.2. MENU/OK key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4.2.3. CANCEL Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4.2.4. ENTER key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4.2.5. DEL key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4.2.6. Numeric keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4.3. Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4.3.1. Special characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4.4. DB-9 download connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
4.4.1. Confi guration downloading to the equipment through the DB-9 connector . .52
4.4.2. UMX-02/0 Firmware upgrade through front DB-9 connector . . . . . . . . . . . .54
5. Technical specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
II. CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
1. General observations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
2. Confi guration through a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
3.2. Audio Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
3. Confi gurations menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
3.1. Access to the Configurations menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
3.2.1. Structure of the Audio Inputs menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
3.2.2. Confi guration of the Audio Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
3.3. Audio Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
3.3.1. Structure of the Audio Outputs menu . . . . . . . . . . . . . . . . . . . . . . . . . . .64
3.3.2. Confi guration of the Audio Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
45
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
3.4. Contact Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
3.4.1. Structure of the Contact Inputs menu . . . . . . . . . . . . . . . . . . . . . . . . . . .69
3.4.2. Confi guration of the Contact Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
3.5. Contact Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
3.5.1. Structure of the Contact Outputs menu . . . . . . . . . . . . . . . . . . . . . . . . . .72
3.5.2. Confi guration of the Contact Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
3.6. Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
3.6.1. Structure of the Groups menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
3.6.2. Confi guration of Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
3.7. Common Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
3.7.1. Structure of the Common Options menu . . . . . . . . . . . . . . . . . . . . . . . . .76
3.7.2. Confi guration of the Common Options . . . . . . . . . . . . . . . . . . . . . . . . . . .76
4. Properties Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
4.1. Access to the Properties menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
4.2. Viewing the configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
5. User Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
5.1. Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
5.2. Logout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
6. Log Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
7. Confi guration examples. Practical cases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
7.1. Example of installation with subzones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
7.2. Example of installation with microphone with zone selection . . . . . . . . . . . . . . . . .82
8. Software and Firmware versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
9. Document Version Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
10. Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
46
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
I. DESCRIPTION AND CONNECTION
1. Description
Audio Microprocessor Matrix for public address systems. Designed to be totally modular, it supports the simultaneous control and addressing of 16 audio signals (program and/or priority) to different outputs, covering all the needs of a public address system.
Thanks to its design, installations can be set up which meet the specifi cations of the evacuation standard EN/UNE 60849.
Characteristics:
• Audio microprocessor matrix with “Stand-alone” operation or PC-controlled.
• 10 positions for housing cards.
• Audio bus expansion connector (16 channels) for connection of various mainframes.
• RS485 control bus, supporting interconnection of various UMX02/0 units and/or connection to a PC (optional).
• Loudspeaker for monitoring the 16 audio channels.
• Alphanumeric display of 4 x 20 characters.
• Front keypad.
• Confi guration by means of front keypad and/or external PC.
• Independent operation and/or with monitoring PC.
• 24 V dc power supply.
• Occupies 2 units on 19’’ rack.
47
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
1 Loudspeaker monitor
2 Volume monitor
3 Monitoring channel selector
4 Channel level indicator
5 Alphanumeric display
6 Rx (RS-485 reception) and Tx (RS-485 transmission) indicators
7 Numeric keypad, 5 key and DEL key
8 ON / OFF Led
9 ON / OFF switch
10 DB-9 download connector
11 Monitored channel indicator
12 Navigation keys
13 Power connector
14 Power and control module
15 Space for cards (10)
16 Audio bus expansion connector
14
13
15
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse3A
24V
RS-485OUT
RS-485IN
OP
TIM
US
S.A
.
UMX-02/0
AU
DIO
BU
SL
IN
K
0
DELDEL
3
6
9
2
5
8
1
4
7
Position
10
Position
9
Position
8
Position
7
Position
6
Position
5
Position
4
Position
3
Position
2
Position
1
16
1
2
3
11
12
98
7
6
5
4
10
Figure 1
48
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
2. Power and control module
2.1. Power supplyTo power the UMX-02/0 a power supply of 24 Vdc is required.
The consumption, without cards, is 285 mA. When the various cards are inserted, the consumption will increase depending on the model and the number of cards inserted.
2.2. Connection of the RS-485 input and output
The UMX-02/0 communicates with the control PC and the various elements of the SMP-250 system (ECM-01, UDCE-01, COU-01, UMX-02/0) through an RS485 bus. For this purpose, it uses the CSMA (Carrier Sense Multiple Access) protocol.
2.2.1. Interconnection of various equipment units (UMX-02/0, DALA01/0B, MD-500EM...)8 pin RJ45 connectors with a metal housing must be used.
1 Power supply
2 Fuse
3 RS-485 bus output
4 RS-485 bus input
5 RS-485 OUT ON/OFF switch
6 RS-485 bus reception indicator
7 RS-485 bus transmission indicator
Figure 2
1
2
7
6
3
5
Fuse
3A
TX
RXOFF
ON
Ma
de
inE
USp
ain
24V
RS-485
OUT
RS-485
IN
OP
TIM
US
S.A
.
4
UMX-02/0
Figure 3
TO
UMX-02/0
RS-485 IN
FROM
UMX-02/0
RS-485 OUT55
SHIELDSHIELD
44
1
8
1
8
RJ-45 RJ-45
DATA B ( )
DATA A ( )
TX
RXOFF
ON
RS-485
OUT
RS485 OUT : ON
RS485 OUT
ON
RS485 OUT
ON
RS485 OUT
ON
RS485 OUT
OFF
RS485
OUT
RS485
OUT
RS485
OUT
RS485
IN
RS485
IN
RS485
IN
RS485
IN
49
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
2.2.2. Interconnection of the UMX-02/0 and the RS-485 card of the PC
2.3. Connection of the ground connection to the chassis
In all public address installations it is very important that there is one single point of connection between the signal ground connection and the mains supply ground contact.
If the public address installation is composed of several equipment units, their chassis will probably be joined, either by means of the ground terminal of the mains connection, or because they are fi tted in a rack cabinet.
If the ground connections are also joined by the signal circuits, it is advisable to remove the jumper between the ground connection and the chassis from all the units except one.
To separate the ground connection from the chassis on the UMX-02/0, remove the panel of the power-control module and extract jumper JP1.
TX
RXOFF
ON
Ma
de
inE
USp
ain
Ma
de
inE
USp
ain
Fuse3A
Fuse3A
24V
RS-485OUT
RS-485OUT
RS-485IN
RS-485IN
OP
TIM
US
S.A
.O
PTI
MU
SS.A
.
UMX-02/0
Figure 4
Figure 5
TO
UMX-02/0
RS-485 IN5
SHIELD
Notconnected
4
1
8
12
34
67
8
9
5
RS-485 P.C.
CONNECTION
COM 6
PORT 2
D-SUB FEMALE
CONNECTOR
RJ-45
D-SUB MALE
CONNECTOR
DATA B ( )DATA B
DATA ADATA A ( )120
50
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
3. Expansion of the UMX-02/0
In the event that the number of cards needed for an installation do not fi t into one UMX-02/0 (more than 10 cards), they can be inserted in several mainframes.
These must be connected by means of the RS485 control bus and the audio bus, which are externally accessible, as shown in fi gure 6.
To connect the RS485 bus, 8-pin RJ45 connectors with a metal housing and CAT 5 STP cable must be used (see section 2.2. Connection of the RS-485 input and output).
To connect the audio bus, 34-pin ribbon cable must be used. When fi tting the cable, particular care must be taken to position the connectors so that the cable can be correctly inserted.
4. Front controls
4.1. Monitoring
4.1.1. Channel selectionPress the CHANNEL SELECTOR buttons (+ and - ) until the channel required is indicated on the display.
4.1.2. Monitoring volumePress the MONITOR VOLUME buttons (+ and - ) until the desired volume is obtained.
4.1.3. Channel levelThe leds bar indicates the signal level of each of the 16 internal audio channels of the UMX-02/0.
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse3A
24V
RS-485OUT
RS-485IN
OP
TIM
US
S.A
.
UMX-02/0
AU
DIO
BU
SL
IN
KA
UD
IO
BU
SL
IN
K
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse3A
24V
RS-485OUT
RS-485IN
OP
TIM
US
S.A
.
UMX-02/0
AU
DIO
BU
SL
IN
KA
UD
IO
BU
SL
IN
K
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse3A
24V
RS-485OUT
RS-485IN
OP
TIM
US
S.A
.
UMX-02/0
AU
DIO
BU
SL
IN
KA
UD
IO
BU
SL
IN
K
Figure 6
CHANNEL SELECTOR
CHANNEL
LEVEL
0 dB
peak
MONITOR VOLUME
Figure 7
51
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
4.2. Navigation, menu access and data entry keys
4.2.1. Navigation keysPress the navigation keys to move around a menu or to move the cursor within group.
4.2.2. MENU/OK keyThis is used to: Enter aselected menu. Save a change.
4.2.3. CANCEL Key This is used to exit a menu or cancel unsaved changes.
4.2.4. ENTER keyThus is used to: Select an option (not a menu). Add elements to a text stream.
4.2.5. DEL keyThis is used to delete an element from a text stream.
4.2.6. Numeric keypad
Keys 0 to 9 are used to enter numerical data.When the system requires a numerical item of data, the cursor fl ashes on the display.
4.3. Display
The UMX-02/0 has an alphanumeric display of 4 x 20 characters.
4.3.1. Special characters
Character cursor.
Position indicator on navigation menus.
Option active.
Card present and detected.
Card not present or not detected.
Appears when part of a text stream is not visible on the screen.
DEL
52
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
4.4. DB-9 download connector
To access the DB-9 download connector remove the front panel.
Allows equipment confi guration and fi rmware update.
4.4.1. Confi guration downloading to the equipment through the DB-9 connector1. Switch off the power supply of the UMX-02/0.
2. Place the Dipswitch in RS232 CONFIGURATION position.
0
DEL9
8
7
3
6
2
5
1
4
Figure 8
1 2 3 4 5 76 8
1 2 3 4 5 76 8
RS232 CONFIGURATION
NORMAL MODEON
ON
OFF
1 2 3 4 5 76 8
FIRMWARE DOWNLOAD MODEON
OFF
OFF
DIPSWITCH CONFIGURATION
Figure 9
53
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
4. Switch ON the the UMX-02/0.
The Front LCD of the UMX-02/0 is disabled and will only show black characters in aleatory positions
5. Run SCF-01 or SCM-01 (P.A. Manager) software and download confi gurations (see P.A. Manager user manual).
6. Switch off the power supply of UMX-02/0.
7. Disconnect the RS232 cable.
8. Confi gure the front dipswitch in the NORMAL MODE position and switch on the power supply of UMX-02/0.
3. Connect the RS232 cable between the computer and the UMX-02/0 front DB-9 connector.
1 2 3 4 5 76 8
1 2 3 4 5 76 8
RS232 CONFIGURATION
NORMAL MODEON
ON
OFF
1 2 3 4 5 76 8
FIRMWARE DOWNLOAD MODEON
OFF
OFF
UMX-02/0 SERIESPORT
Computer (*)
Rs232CABLE
ETHERNET
CABLE
RS232
(PIN to PIN
connected)
9 PINS
SUB D
MALE
9 PINS
SUB D
FEMALE
pin 1 pin 1
pin 2 pin 2
pin 3 pin 3
pin 4 pin 4
pin 5 pin 5
pin 6 pin 6
pin 7 pin 7
pin 8 pin 8
pin 9 pin 9
Figure 10
UMX-02/0 USBPORT
USB/RS232CONVERTER
Computer (*)
ETHERNET
Figure 11
54
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
4.4.2. UMX-02/0 Firmware upgrade through front DB-9 connector
1. Switch off the power supply of the UMX-02/0.
2. Place the front dipswitch in FIRMWARE DOWNLOAD MODE position.
3. Connect the RS232 cable between the computer and the UMX-02/0 front DB-9 connector (Fig. 10).
4. Switch ON the the UMX-02/0.
The Front LCD of the UMX-02/0 is disabled and will only show black characters in aleatory positions.
5. Run the FLASH DEVELOPMENT TOOLKIT BASIC software.
1 2 3 4 5 76 8
1 2 3 4 5 76 8
RS232 CONFIGURATION
NORMAL MODEON
ON
OFF
1 2 3 4 5 76 8
FIRMWARE DOWNLOAD MODEON
OFF
OFF
DIPSWITCH CONFIGURATION
Figure 12
V 10.1
UMX-02/0
H8/3068
Fuse
3A
TX
RXOFF
ON
Ma
de
inE
USp
ain
24V
RS-485
OUT
RS-485
IN
OP
TIM
US
S.A
.
UMX-02/0
Figure 13
6. Open the Options menu. Enable the option AutoDisconnect and select New Settings.
7. Select the project you want to use UMX_H8_3064.AWS or UMX_H8_3068.AWS (depending on the type of micro-controller that is inside the UMX-02/0) and click on Next.
Figure 14
55
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
8. Select the port to be used and press Next.
9. Select the frequency according to the equipment (UMX=7.3728 Mhz) and press Next.
10. Leave the default options and press Next.
11. Leave the default options and press End.
12. Mark the checkbox User/Data Area press the button “ “ and select Browse.
13. Select the desired download fi les to equipment and press Open.
Figure 15
Figure 16
56
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
5. Technical specifi cations
Power supply 24 V.d.c.
Consumption 560 mA (without cards)
Capacity 10 cards
Audio channels 16
Communication systemRS-485 by means of RJ45 connector CSMA/CD protocol
FinishesFront panel: Iron black painted
Cover: Black Skinplate
Transmission speed 9600 bps
Weight 5,8 Kg.
Dimensions 482,6 x 88,6 x 300 mm
1 2 3 4 5 76 8
1 2 3 4 5 76 8
RS232 CONFIGURATION
NORMAL MODEON
ON
OFF
1 2 3 4 5 76 8
FIRMWARE DOWNLOAD MODEON
OFF
OFF
14. Click on the Program Flash button and start the download. When the download completes the message “Image succefully Written to device” appears in green color.
15. Click on Exit button to close the Flash Development Toolkit Basic application.
16. Disconnect the power supply from the UMX-02/0.
17. Disconnect the download cable.
18. Confi gure the front dipswitch in NORMAL MODE position.
19. Connect the power supply once again.
To test that the fi rmware version is properly updadted, press CANCEL button and the UMX-02/0 LCD display will show the new version.
Figure 17
Figure 18
57
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
II. CONFIGURATION
1. General observations
Before using the UMX-02/0, it is essential that it is confi gured.
Its confi guration will depend on the number and type of UMX-02/0 series cards that are inserted in the matrix, in addition to the specifi c characteristics of each installation.
To create or modify any confi guration, fi rst it is necessary to enter the password. Please read the instructions in section II. Confi guration / 5. User Menu.
It is recommended that the confi guration is performed with the various cards positioned in the matrix and the cables connected.
2. Confi guration through a PC
In the case of installations that are confi gured through a PC, follow the instructions in section II. Confi guration / 3.7. Common Options and confi gure the Address parameter of the UMX-02/0. Then follow the SMP-250V2 software confi guration manual.
58
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
3.2. Audio Inputs
From this menu the UMX-2E and UMX-EGC input cards can be confi gured.
When the option Audio Inputs is selected from the Confi gurations menu, a list of 20 elements appears. Each of these represents one of the 20 possible inputs (a UMX-02/0 has 10 spaces for a card and each card has 2 inputs).
Address:
This is a number between 1 and 99 which identifi es each of the UMX-02/0 units connected to the RS485 bus. Each number is unique and cannot be repeated on the same installation.
Physical input:
This number identifi es each of the audio inputs according to the position occupied by the input card on the UMX-02/0. Each UMX-02/0 has 10 card spaces, and each card has two inputs, so the inputs are numbered from 01 to 20.
i:
Input. Indicates input.
Logical input:
A number between 1 and 9999, confi gurable by the user, by which this input will be identifi ed on the various menus.
Presence of card indicator:
Card not present or not detected.
Card present
3. Confi gurations menu
3.1. Access to the Confi gurations menu
1. Press the MENU/OK key.
2. Using the navigation keys, select Confi gurations and press MENU/OK once again.
From this menu it is possible to access the confi guration parameters of the Audio inputs, Audio outputs, Contact inputs, Contact outputs, Groups and Common Options.
M E N U C o n f i g u r a t i o n sP r o p e r t i e sU s e r
A u d i o I n p u t s 0 1 0 1 _ i X X X X o
0 1 0 2 _ i X X X X o 0 1 0 3 _ i X X X X o
X X X X_ i X X X X o
UMX-02/0 address
Physical input
Input (i= input)
Logical input
Presence of card indicator
59
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
Numbering of the physical audio inputs of a UMX-02/0
3.2.1. Structure of the Audio Inputs menu
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse
3A
Fuse
3A
24V
RS-485
OUT
RS-485
OUT
RS-485
IN
RS-485
IN
OP
TIM
US
S.A
.
UMX-02/0
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
UMX-2EAUDIO INPUTS
B
A
BU
SA
UD
IO
LIN
K
01030507091113151719
02040608101214161820
Figure 19
XX01_iXXXX o
Input Number
Audio Inputs
XX01_iXXXX o
XX01_iXXXX o
XX01_iXXXX o Gong
XX01_iXXXX o RP1
XX01_iXXXX o RP1 On
XX01_iXXXX o Gong
XX01_iXXXX o RP1
XX01_iXXXX o Queue
XX01_iXXXX o H./I.
Logical Input?
Hardware Inputs XX01
XX01_iXXX o
XX01_iXXX o
Out./ Group Assoc.
Priority Level
XX02_iXXXX o
Label
Pro / Pri
Program
...
Associated Outputs
Priority
...
(0 to 63)
Off
Tones
Personal
Play Message
Play Gong
Once
Endless
Playback Mode
Record Message
Record Gong
Priority Level
XX20_iXXXX o
Gong
RP1
Queues
Enabled/Disabled
Default
Properties
Off
Off
Enabled
On
On
Disabled
Configurations
Audio Inputs
MENU
Configurations
Properties
Audio Outputs
User
Contacts Inputs
Contacts Outputs
Groups
Common options
60
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
• I. Input Number
Also known as Logical Input.
Using the numeric keypad, enter a number between 1 and 9999
This number will be the one that identifi es this input on the various menus.
here cannot be more than one logical input with the same number.
Press the MENU/OK key to save the data.
• II. Label
The information on this label must be completed from the control computer. The text that it contains is merely for information purposes.
• III. Pro / Pri
Program: the signal applied to this input will leave through the audio outputs with which this program input has been associated.
Priority: the signal applied to this input will leave through the associated outputs when the priority contact is activated.
Using the navigation keys, position yourself on Program or Priority and press key 5 to select.
The √ sign indicates the current confi guration.
Press the MENU/OK key to save the data.
• IV. Associated Outputs
These are the audio outputs through which the signal applied to this input will leave when the priority contact is activated.
To associate an output, its logical output number must be entered using the numeric keypad.
It is also possible to associate Groups. To do so, the number of the Group that it is wished to associate must be entered using the numeric keypad. The groups must fi rst have been created by means of the Groups menu (see section II. Confi guration / 3.6. Groups).
To add other zones or groups, press key 5 and then the name of the zone or group that it is wished to add (maximum 100 outputs and/or groups associated with an input).
• V. Priority Level
Priority level of each input confi gured as Priority with respect to the others.
There are 64 different priority levels.
Maximum priority = 0
Minimum priority = 63
By default a priority of 5 is established.
• VI. Gong (only for the UMX-EGC card inputs)
This option is used to confi gure the gong for the inputs confi gured as priority.
Off: Deactivates the pre-announcement.
Tones: Activates the gong of the card.
3.2.2. Confi guration of the Audio Inputs
Having selected the option Audio Inputs from the Confi gurations menu, select the input that you wish to confi gure using the navigation keys.
Press MENU/OK.
Select the various options from the menu using the navigation keys. Once an option has been selected, open it using the MENU/OK key. To exit a menu press the CANCEL key.
H a r d w a r e i n p u t 0 1 0 1L o g i c a l i n p u t ? _
0 1 0 3 _ i 3 L a b e l
S M P 9 4 R S
• 0 1 0 3 _ i 3 P r o g r a m
√ P r i o r i t y
• 0 1 0 3 _ i 3 A s s o c . O u t . / G r o u p s1 + 0 1 + 0 7 + 4 2 + 3 _
61
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
Personal: Activates the personalized pre-announcement. This must be recorded beforehand. Use of the personalized pre-announcement is incompatible with the use of queues and pre-recorded messages on a card (RP1).
The √ sign indicates the current confi guration.
Situate the position indicators on the desired option and press key 5 to select.
Press the MENU/OK key to save the data.
• VII. RP1 (only for the UMX-EGC card inputs).
For inputs confi gured as priority, through this option a message can be recorded in the memory of the card for subsequent playback whenever required (activating the priority contact of the audio input).
This option is incompatible with the use of a personalized pre-announcement or a message queue.
Activation / Deactivation of the function RP1:
Select the option RP1 and press MENU/OK.
Select Off (RP1 deactivated) or On (RP1 activated) and press key 5 to confi rm.
The √ sign indicates the current confi guration.
N.B.: Options RP1 and Queues are mutually exclusive. When the function RP1 is activated, the Queues function is disabled.
Press MENU/OK to confi rm or CANCEL to reject the change.
Confi guration of the RP1 message:
Select On and press MENU/OK. Three options
appear:
1. Record message:
Connect the audio source with a level of 0 dB to the input of the UMX-EGC card in accordance with fi gure 9
Select Record Message and press MENU/OK.
Press MENU/OK again to begin recording.
Press any key to end the recording.
2. Play message:
Select Play Message and press MENU/OK.
Position the monitor on the channel indicated (using the CHANNEL SELECTOR keys) and press the MENU/OK key.
3. Playback mode:
N.B.: In order to modify and save changes made to the playback mode, the RP1 function must in the On position.
Select Playback Mode and press MENU/OK.
Situate the position indicators on Once (the message will be played back only once when the input priority is activated) or Endless (the message will be played back continuously while the input priority is activated) and press key 5.
Press MENU/OK to save the data.
• VIII. Queues (only for the UMX-EGC card inputs).
For inputs confi gured as priority, the use of queues avoids the loss of messages when the outputs to which they are addressed are busy.
The system automatically records all the messages in a temporary memory, and when the outputs are free, the message is played back.
This option is incompatible with the use of a personalized pre-announcement and messages prerecorded on a card (RP1).
Select the option Queues and press MENU/OK.
Select Off (Queue deactivated) or On (Queue activated) and press key 5 to confi rm.
The √ sign indicates the current confi guration.
Press the MENU/OK key to save the data.
W a r n i n gT h e Q u e u e f u n c t i o nw i l l b e d i s a b l e dO K C A N C E L
Figure 20
Pin number 1: SIGNAL H
Pin number 2: SIGNAL C
Pin number 8: GND
1
8
0 1 0 3 _ i 3 R P 1 R e c o r d M e s s a g e
P l a y M e s s a g e P l a y b a c k M o d e
0 1 0 3 _ i 3 R P 1 R e c o r d M e s s a g e
P l a y M e s s a g e P l a y b a c k M o d e
0 1 0 3 _ i 3 R P 1 R e c o r d M e s s a g e P l a y M e s s a g e
P l a y b a c k M o d e
62
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
• IX. Enabled/Disabled
Select the option Enabled/Disabled and press MENU/OK.
Select Enabled or Disabled and press key 5 to confi rm.
The √ sign indicates the current confi guration.
Press the MENU/OK key to save the data.
• X. Default
This re-establishes the default confi gurations of the input:
Input Number: Does not vary.
Label: No label
Pro / Pri : Program
Associated Outputs: None
Priority Level: 5
Gong: Off
Queues: Off
Enabled/Disabled: Disabled
RP1: Off
Select the option Default and press MENU/OK.
Press the MENU/OK key to save the data.
Press CANCEL to exit the menu without applying the default confi gurations.
• XI. Properties
Through this option all the input confi gurations can be viewed.
Select Properties and press MENU/OK.
Use the navigation keys to view the various audio input confi gurations.
Press CANCEL to return to the menu.
63
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
3.3. Audio Outputs
This menu is used to confi gure the UMX-2S output cards.
When the option Audio Outputs is selected from the Confi gurations menu, a list of 20 elements appears. Each of these represents one of the 20 possible outputs (a UMX-02/0 has 10 spaces for a card and each UMX-2S card has 2 outputs).
Address:
This is a number between 1 and 99 which identifi es each of the UMX-02/0 units connected to the RS485 bus. Each number is unique and cannot be repeated on the same installation.
Physical output:
This number identifi es each of the audio outputs according to the position occupied by the UMX-2S card on the UMX-02/0. Each UMX-02/0 has 10 card spaces, and each card has two inputs, so the outputs are numbered from 01 to 20.
o:
Output. Indicates output.
Physical output:
A number between 1 and 9999, confi gurable by the user, by which this output will be identifi ed on the various menus.
Presence of card indicator:
Card not present or not detected
Card present
A u d i o o u t p u t s 0 1 0 1 _ o X X X X o
0 1 0 2 _ o X X X X o 0 1 0 3 _ o X X X X o
X X X X_o X X X X o
UMX-02/0 address
Physical output
o= output
Logical output
Presence of card indicator
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
AUDIO OUTPUTS
UMX-2S
B
A
TX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse
3A
Fuse
3A
24V
RS-485
OUT
RS-485
OUT
RS-485
IN
RS-485
IN
OP
TIM
US
S.A
.
UMX-02/0
BU
SA
UD
IO
LIN
K
01030507091113151719
02040608101214161820
Figure 21
Numbering of the physical outputs of a UMX-02/0
64
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
3.3.1. Structure of the Audio Outputs menu
Output Number
XX01_oXXXX o E./D.
XX01_oXXXX o XX01_oXXXX o Progra
XX01_oXXXX o P. Vol.
XX01_oXXXX o Advanc
XX01_oXXXX o - iXXXX
Ecualizations E./D.
Input Number?
Program Bass?
Bass?
Priority Bass?
Program Treble?
Treble?
Priority Treble?
Program Volume?
Volume?
Priority Volume?
Program Inc/Dec?
Priority Inc/Dec?
Logical Output?
Input Number?
Input Number?
XX01_oXXXX o New Eq
XX01_oXXXX o
XX01_oXXXX o - iXXXX
XX01_oXXXX o
XX01_oXXXX o
XX01_oXXXX o - iXXXX
XX01_oXXXX o
XX01_oXXXX o
XX01_oXXXX o - iXXXX
XX01_oXXXX o
XX01_oXXXX o
XX01_oXXXX o
Hardware Output XX01
XX01_oXXXX o Modif.
XX01_oXXXX o Delete
XX01_oXXXX o -
XX01_oXXXX o Volume
XX01_oXXXX o
Associated Input?
Label
Volume
Program Vol.
Volume
Volume
New
Volume
. ...
.. dB
.. DB
.. dB
.. dB
.. dB
.. dB
..
..
..
..
..
...
Eq. ...
Eq. ...
i...
i...
i...
Associated Input
Priority. Vol.
...
Bass
Bass
Modify
Bass
Advanced
Treble
Treble
Delete
Treble
Inc/Dec Volume
Inc/Dec Volume
List
Enabled/Disabled
Delete
Enabled / Disabled
Default
Properties
Enabled
Enabled
Disabled
Disabled
XX01_oXXXX o
Audio outputs
XX02_oXXXX o
XX20_oXXXX o
Configurations
Audio Inputs
MENU
Configurations
Properties
Audio Outputs
User
Contacts Inputs
Contacts Outputs
Groups
Common options
65
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
• I. Output Number
Also known as Logical Output. Using the numeric keypad, enter a number between 1 and 9999.
This number will be the one that identifi es this output on the various menus.
There cannot be more than one logical output with the same number.
Press the MENU/OK key to save the data.
• II. Label
The information on this label must be completed from the control computer. The text that it contains is merely for information purposes.
• III. Volume
Access the volume menu by selecting the option Volume and pressing the MENU/OK key.
1. Program Volume (Program Vol.)
Access the program volume menu by selecting the option Program Vol. and pressing the MENU/OK key.
From this menu the program volume parameters can be confi gured:
• Volume
• Bass
• Treble
• Inc/Dec Volume
Volume:
Select the option Volume and press MENU/OK.
There are a total of 33 volume positions.
0 = Volume off
32= Maximum volume (0dB output).
Modify the volume by means of the navigation keys.
Press the MENU/OK key to save the modifi cation.
Bass:
Select the option Bass and press MENU/OK.
Using the navigation keys, adjust the bass level to ±10 dB.
Press the MENU/OK key to save this adjustment.
Treble:
Select the option Treble and press MENU/OK.
Using the navigation keys, adjust the treble level to ±10 dB.
Press the MENU/OK key to save this adjustment.
Increase/Decrease Volume:
Through this parameter the volume can be increased or decreased when a contact input is activated.
Select the option Inc/Dec Volume and press MENU/OK.
3.3.2. Confi guration of the Audio Outputs
Having selected the option Audio Outputs from the Confi gurations menu, select the output that you wish to confi gure using the navigation keys.
Press MENU/OK.
Select the various options from the menu using the navigation keys. Once an option has been selected, open it using the MENU/OK key. To exit a menu, press the CANCEL key.
P h y s . O u t p u t 0 1 0 1P h y s . O u t p u t ? _
0 1 0 3 _ o 3 � L a b e l Z o n e 3
0 1 0 3 _ o 3 P r o g . V o l . V o l u m e
B a s s T r e b l e
0 1 0 3 _ o 3 P r o g . V o l . V o l u m e
B a s s T r e b l e
V o l u m e B a s s T r e b l e
I n c / D e c V o l u m e
0 1 0 3 _ o 3 P r o g . V o l . V o l u m e B a s s
T r e b l e
66
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
Using the navigation keys, adjust the increase (from 1 to 32) or decrease (from –1 to –32) in volume. Bear in mind that the volume values range from 0 (volume off) to 32 (maximum volume).
Press the MENU/OK key to save this adjustment
If this functionality is required, it is necessary to confi gure a contact of the UMX-EC card with the Inc/Dec Volume functionality (see section II. Confi guration / 3.4. Contact Inputs), associating the contact with this output, so that when its activation is detected, the increase or decrease in volume is effected.
2. Priority Volume (Priority Vol.)
From this menu the priority volume parameters can be confi gured: Volume, Bass, Treble and Inc / Dec volume.
Access the priority volume menu by selecting the option Priority Vol. and pressing the MENU/OK key.
The confi guration options are the same as those for the program volume, only in this case they affect the priority volume.
3. AdvancedThrough this option the priority volume parameters of an output (volume, bass and treble) can be confi gured in accordance with the input generating the message. In this way, an output can have different equalizations depending on the audio input used.
To access the menu, select Advanced and press the MENU/OK key.
Four options appear:
• New
• Modify
• Delete
• List
New
This menu is used to create new equalizations. Each equalization belongs to a different input.
1. Select New and press MENU/OK.
2. Enter the number of the input that you wish to equalize and press MENU/OK.
3. Select the parameter that you wish to confi gure and press the MENU/OK key.
4. To modify a value, use the navigation keys.
• Volume: This establishes a volume between 0 and 32.
• Bass: This adjusts the bass level to ±10 dB.
• Treble: This adjusts the treble level to ±10 dB.
• Enabled/Disabled: This activates (enabled) or deactivates (disabled) an equalization.
• Delete: This deletes the equalization.
5. Press MENU/OK to save the data or CANCEL to exit without saving.
Modify
This modifi es the parameters of an equalization created earlier.
1. Select Modify and press MENU/OK.
2. Enter the number of the input that you wish to modify and press MENU/OK.
3. Select the parameter that you wish to modify (Volume, Treble, Bass, Enabled/Disabled, Delete) and press the MENU/OK key.
4. To modify a value, use the navigation keys.
5. Press MENU/OK to save the data or CANCEL to exit without saving.
Delete
This deletes the equalization of a particular input.
1. Select Delete and press MENU/OK.
2. Enter the number of the input whose equalization you wish to delete and press MENU/OK.
0 1 0 3 _ o 3 V o l u m e P r o g . V o l .
P r i o . V o l . A d v a n c e d
67
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
List
This displays all the inputs that have an equalization for this output.
From this menu it is also possible to modify or delete a specifi c equalization.
To do so, select an input from the list, press the MENU/OK key and modify the appropriate parameter (Volume, Treble, Bass, Enabled/Disabled and Delete).
To modify a value, use the navigation keys.
Press MENU/OK to save the data or CANCEL to exit without saving.
• IV. Associated Input
The associated input must be a program input (normally music).
The signal applied to the associated input will be present at the output while the output is on standby (provided that the priority of this output is not activated).
1. Select Associated Input
2. Press MENU/OK.
3. Enter the number of the input that you wish to associate (logical input number).
• V. Enabled/Disabled
This enables or disables the output.
Position yourself on the desired option and press key 5 to select.
The √ sign indicates the current confi guration.
Press the MENU/OK key to save the data.
• VI. Default
This re-establishes the default confi gurations of the output:
Output Number: Does not vary.
Label: No label
Program Volume: 15
Priority Volume: 15
Program Treble: 0
Program Bass: 0
Priority Bass: 0
Priority Treble: 0
Associated Input: None
Enabled/Disabled Disabled
Equalizations: None
Press the MENU/OK key to re-establish the default confi gurations or CANCEL to exit the menu without applying any changes.
• VII. Properties
Through this option, all the output confi gurations can be viewed.
Press the navigation keys to view the various confi gurations.
Press CANCEL to return to the menu.
0103_o3 A s s o c . I n p u t ? 1
68
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
3.4. Contact Inputs.
This menu is used to confi gure the UMX-ECT contact input cards.
Having selected the option Contact Inputs using the navigation keys, press MENU/OK.
On the Confi gurations menu, a list of 11 elements appears. Each of the fi rst ten elements represents one of the 10 possible contact cards that a UMX-02/0 can contain.
The option Default disables all the contact inputs of all the UMX-ECT cards in the UMX-02/0.
Choose the card that you wish to confi gure according to its position in the UMX-02/0 and press MENU/OK.
Once the card has been selected, choose the contact that you wish to confi gure and press MENU/OK once again. Each card has 8 contacts.
Confi gure the various options of the menu by following the instructions in section II. Confi guration / 3.4.2 Confi guration of the Contact Inputs.
The option Default disables all the contact inputs of the UMX-ECT card.
C a r d 1 o E C C o n t a c t 1
C o n t a c t 2 C o n t a c t 3
C o n t a c t I n p u t C a r d 1 o
C a r d 2 o C a r d 3 o
Number of the UMX-ECT card iin the UMX-02/0
Presence of card indicator
C a r d 1 o
Card not present or not detected
Card present
Numbering of the UMX-ECT cards in a UMX-02/0, rear view.
Figure 22
Car
d 9
Car
d 7
Car
d 5
Car
d 8
Car
d 1
0
Car
d 3
Car
d 2
Car
d 1
Car
d 4
Car
d 6
73
80
65
72
57
64
49
56
41
48
33
40
25
32
17
24
9
16
1
8
aaaaaaaaaaTX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse
3A
Fuse
3A
24V
RS-485
OUT
RS-485
OUT
RS-485
IN
RS-485
IN
OP
TIM
US
S.A
.
UMX-02/0
BU
SA
UD
IO
LIN
K
CONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-ECT
69
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
• I. Contact input number
Select Ct Input Number and press MENU/OK.
Using the numeric keypad, enter a number between 1 and 9999.
This number will be the one that identifi es this contact input on the various menus.
There cannot be more than one contact input with the same number.
By default, the UMX-02/0 numbers the contacts of the UMX-ECT card from 10001.
Press the MENU/OK key to save the data.
• II. Label
The information on the label must be completed from the control computer. The text that it contains is merely for information purposes.
• III. Functionality
This enables the user to confi gure the function of the contact input.
Select Functionality and press MENU/OK.
Choose one of the options and press MENU/OK.
1. Disabled.
2. Input Selection.
3. Live Message.
4. PC Notifi cation.
5. Inc/Dec Volume.
These options are mutually exclusive.
1. Disabled
By means of this option, the functionality of a contact can be deactivated.
To do so, select the option Disabled and press key 5.
The √ sign indicates that the functionality of the contact has been disabled.
3.4.1. Structure of the Contact Inputs menu
3.4.2. Confi guration of the Contact Inputs
C a r d 1 o E C C t 1L a b e l
C a r d s 1 o E C C t 1 I n p u t N u m b e r . 1 _
Card 1 o Contact 1
Contact 2
Contact 3
Contact 4
Contact 5
Contact 6
Contact 7
Contact 8
Contacts Inputs Card 1 o CI
Input Number
Out/Group Assoc.
Card 1 o CI Ct1
Card 1 o CI Ct1
Card 1 o CI Ct1
Card 1 o CI Ct1
Card 1 o CI Ct1 Card 1 o CI Ct1
Card 1 o CI Ct1
Card 1 o CI Ct1
Associated Input?
Priority Level
Out/Group Assoc.
Card 1 o CI Ct1
Gong
Card 2 o
Card 3 o
Card 4 o
Card 5 o
Card 6 o
Card 7 o
Card 8 o
Card 9 o
Ct Input Number
Disabled
Input
Input
Off
...
...
Label
Input Selection
Outputs ...
(0 a 63)
...Outputs
Tones
Priority Level
Personal
Gong
Functionality
Live Message
PC Notification
Inc/Dec Volume
Default
Card 10 o
Default
Configurations
Audio Inputs
MENU
Configurations
Properties
Audio Outputs
User
Contacts Inputs
Contacts Outputs
Groups
Common options
70
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
2. Input Selection
An audio input and some audio outputs are defi ned.
When the contact input and the priority of the audio input are activated, the message is sent to the audio outputs.
• Input: Enter the input number where the message generating source has been connected.
Press MENU/OK to save the data.
• Outputs: Enter the name of the output or group of outputs to which the message is to be sent. To add other outputs or groups, press key 5 and then the name of the output or group that you wish to add (maximum 100 outputs and/or groups).
Press MENU/OK to save the data.
In section II. Confi guration / 7.2. a typical example of an installation with microphone with zone selection is shown.
3. Live Message
An audio input and some audio outputs are defi ned.
When the contact input is activated, the message is sent to the audio outputs. Unlike the previous confi guration, it is not necessary to activate the priority of the audio input.
• Input: The input number where the message generating source has been connected must be entered using the numeric keypad.
Press MENU/OK to save the data.
• Outputs: Enter the name of the output or group of outputs to which the message is to be sent. To add other outputs or groups, press key 5 and then the name of the output or group that you wish to add (maximum 100 outputs and/or groups).
Press MENU/OK to save the data.
• Priority Level: The priority level is established in the same way as when an audio input is confi gured.
There are 64 different priority levels.
Maximum priority = 0
Minimum priority = 63
By default a priority of 5 is established.
• Gong: This option is for confi guration of the gong (provided that the audio input belongs to a UMX-EGC card).
- Off: This deactivates the pre-announcement.
- Tones: This activates the gong of the card.
- Personal: This activates the personalized pre-announcement. This must be recorded beforehand. Use of the personalized pre-announcement is incompatible with the use of queues and pre-recorded messages on a card (RP1).
Situate the position indicators on the desired option and press key 5 to select.
The √ sign indicates the current confi guration.
Press the MENU/OK key to save the data.
These confi gurations do not modify the confi guration of the audio input.
4. PC Notifi cation
Through this function the control computer is notifi ed of any variation in the status of the contact.
For this purpose, the UMX-02/0 and the PC must be connected by means of the RS485 bus.
5. Inc/Dec Volume
Enter the number corresponding to the outputs or groups whose volume it is wished to modify when the contact input is turned off. These outputs will adopt the volume defi ned when confi guring the increase / decrease in volume of the audio outputs.
These confi gurations do not modify the confi guration of the audio input.
71
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
3.5. Contact Outputs
This menu is used to confi gure the UMX-SCT contact output cards.
Having selected the option Contact Outputs using the navigation keys, press MENU/OK.
A menu with 11 elements appears. The fi rst ten elements represent each of the 10 possible contact cards that a UMX-02/0 can contain.
The option Default disables all the output contacts of all the UMX-SCT cards in the UMX-02/0.
Choose the card that you wish to confi gure according to its position in the UMX-02/0 and press MENU/OK.
Once the card has been selected, choose the contact that you wish to confi gure and press MENU/OK once again. Each card has 8 contacts.
The option Default disables all the output contacts of the card.
Confi gure the various options of the menu by following the instructions in section II. Confi guration / 3.5.2 Confi guration of the contact outputs.
C o n t a c t O u t p u t s C a r d 1 o
C a r d 2 o C a r d 3 o
Number of the UMX-SCT card in the UMX-02/0
Presence of card indicator
C a r d 1 o
Card not present or not detected
Card present
Numbering of the UMX-SCT cards in a UMX-02/0, rear view
Figure 23
73
80
65
72
57
64
49
56
41
48
33
40
25
32
17
24
9
16
1
8
aaaaaaaaaaTX
RXOFF
ON
Ma
de
inE
USp
ain
Fuse
3A
Fuse
3A
24V
RS-485
OUT
RS-485
OUT
RS-485
IN
RS-485
IN
OP
TIM
US
S.A
.
UMX-02/0
BU
SA
UD
IO
LIN
K
CONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCTCONTACTS OUTPUT
1A
1
2
3
4
6
7
5
8
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
GND
GND
UMX-SCT
Car
d 9
Car
d 7
Car
d 5
Car
d 8
Car
d 1
0
Car
d 3
Car
d 2
Car
d 1
Car
d 4
Car
d 6
C a r d 1 o S CC o n t a c t 1
C o n t a c t 2 C o n t a c t 3
72
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
• I. Contact output number
Select Ct Output Number and press MENU/OK.
Using the numeric keypad, enter a number between 1 and 9999.
This number will be the one that identifi es this contact output on the various menus.
There cannot be more than one contact output with the same number.
By default, the UMX-02/0 numbers the contacts of the UMX-SCT card from 10001.
Press the MENU/OK key to save the data.
• II. Label
The information on the label must be completed from the control computer.
The text that it contains is merely for information purposes.
• III. Functionality
This enables the user to confi gure the function of the contact input.
Select Functionality and press MENU/OK.
Using the selection keys, choose one of the options and press MENU/OK.
1. Disabled.
2. Groups.
3. Events.
4. Activated by PC.
The selection of any of the options excludes the others.
1. Disabled
By means of this option, the functionality of the contact can be deactivated.
To do so, select the option Disabled and press key 5 .
The √ sign indicates that the functionality of the contact has been disabled.
3.5.1. Structure of the Contact Outputs menu
C a r d 1 o S C C t 1 O u t p u t N u m b e r 1 _
C a r d 1 o S C C t 1 L a b e l
3.5.2. Confi guration of the Contact Outputs
Card 1 o Contact 1
Contact 2
Contact 3
Contact 4
Contact 5
Contact 6
Contact 7
Contact 8
Contacts Outputs Card 1 o CO
Output Number
Card 1 o CO Ct1Card 1 o CO St1
Card 1 o CO Ct1
Card 1 o CO Ct1
Card 1 o CO Ct1
Group Number?
Input?
Card 1 o CO Ct1
Card 1 o CO Ct1 SE
Card 1 o CO Ct1 EE
Card 2 o
Card 3 o
Card 4 o
Card 5 o
Card 6 o
Card 7 o
Card 8 o
Card 9 o
Ct Output Number
Disabled Event Start
Disabled
Disabled
...Label
Groups
...
...
Event End
Gong Start
Gong EndInput
Message Start
Message End
Functionality
Events
Activated by PC
Default
Card 10 o
Default
Configurations
Audio Inputs
MENU
Configurations
Properties
Audio Outputs
User
Contacts Inputs
Contacts Outputs
Groups
Common options
73
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
2. Groups
The contact output will be activated when a particular group is selected. This selection occurs, for example, when an audio input associated with that group is activated.
To confi gure this option, select Groups and press MENU/OK.
Enter the number of the group whose selection activates the contact output.
Press the MENU/OK key to save the data.
Press key 5 to enable this option.
Section II. Confi guration / 7.1. shows a block diagram typical of this functionality, such as information on the creation of subzones.
3. Events
The contact output will be activated in accordance with the detection of an event start (Gong Start or Message Start) at a particular input, and it will be deactivated in accordance with an end event (Gong End or Message End ).
To confi gure the events, select events and press MENU/OK.
• Confi guration of Event Start
Select Event Start and press MENU/OK.
- Disabled. No event is detected.
- Gong Start. The contact is activated when the Gong is started at a pre-established input.
- Message Start. The contact is activated when the message is started at a pre-established input.
• Confi guration of End Event
- Disabled. No event is detected.
- Gong End. The contact is deactivated when the Gong ends at a pre-established input.
- Message End. The contact is deactivated when the message ends at a pre-established input.
• Confi guration of Input
This establishes the input number whose gong or message acts as a start and end event.
Once the start events, end event and input are confi gured, press CANCEL to return to the contact confi guration menu.
Press key 5 to enable the contact output confi guration by events.
4. Activated by PC
In this case the control PC activates and/or deactivates the contact output.
Select Activated by PC and press key 5.
C a r d 1 o S C C t 1 D i s a b l e d G r o u p s
E v e n t s
C a r d 1 o S C C t 1G r o u p N u m b e r ? 0 _
74
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
3.6. Groups
This menu is used to create, edit or delete groups.
The system supports the creation of 250 different groups.
A group can be formed by other groups.
Each group can contain 50 different elements (zones or groups).
3.6.1. Structure of the Groups menu
1. Select the option Groups from the Confi gurations menu.
2. Press MENU/OK.
3. Select one of the options:
I. New
II. Modify
III. Delete
IV. List
• I. Creation of a new group
1. Select the option New to create new groups.
2. Press MENU/OK.
3. Enter a number (between 1 and 250) for the new group.This number, preceded by the digit 0, will identify this group on the various menus.
4. Press MENU/OK.
G r o u p sN e w
M o d i f y D e l e t e
3.6.2. Confi guration of Groups
New
...
...
...
...
...
...Delete
Edit
Groups New Group
Modify Group
Delete Group
Group 0...
Group 0...
Group 0...Group 0...
Group Number?
Group Number?
Group Number?
Outputs/Groups
Outputs/Groups
Outputs/Groups
List
Modify
Delete
List
Group 0...
Group 0...
Group 0...
Configurations
Audio Inputs
MENU
Configurations
Properties
Audio Outputs
User
Contacts Inputs
Contacts Outputs
Groups
Common options
75
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
5. Enter the number of the output and/or the groups that make up the new group.
To do this, use the numeric keypad to enter the number of the fi rst element that forms the group (an output number or that of another group) and press key 5. Then enter the second element and press 5 , and so on until completing the sequence of elements that make up the group.
6. Press MENU/OK to save the data.
7. Press MENU/OK once again to create another group or CANCEL to exit the menu.
• II. Modifi cation of a group
1. Select the option Modify from the Groups menu in order to change the elements that form a group which already exists.
2. Press MENU/OK.
3. Enter the number of the group that you wish to modify.
4. Press MENU/OK.
5. Delete or add elements to the group.
a. To delete elements from the group: Use the navigation keys to move the cursor to the element that you wish to delete and press the DEL key, deleting the characters one by one.
b. To add elements to the group: Use the navigation keys to move the cursor to the position of the group where you wish to add an element and enter the data using the numeric keypad.
6. Press MENU/OK to save the changes.
7. Press MENU/OK once again to modify another group or CANCEL to exit the menu.
• III. Deletion of a group
1. Select the option Delete from the Groups menu in order to delete a group.
2. Press MENU/OK.
3. Enter the number of the group that you wish to delete.
4. Press MENU/OK.
5. Press MENU/OK again to delete the group or CANCEL to reject the deletion.
• IV. List
Through this option a list with all the existing groups can be viewed. Furthermore, groups can be deleted or modifi ed.
1. Select the option List from the Groups menu.
2. Press MENU/OK.
3. Using the navigation arrows, select a group number.
4. Press MENU/OK.
5. Select Edit or Delete.
a. Edit: The elements that form the group can be viewed or the composition of the group can be modifi ed.
1. Press MENU/OK.
2. The composition of the group is displayed on the screen. To modify it, follow step no. 5 of section II. Confi guration / 3.6.2. Confi guration of groups / II. Modifi cation of a group.
3. Press MENU/OK.
b. Delete: This deletes the selected group.
1. Press MENU/OK.
2. Press MENU/OK once again to delete the group or CANCEL to reject the deletion.
6. Press CANCEL to exit the menu.
76
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
3.7. Common Options
3.7.1. Structure of the Common Options menu
3.7.2. Confi guration of the Common Options
1. Select the option Common Options from the Confi gurations menu.
2. Press MENU/OK.
3. Select one of the options:
I. Address
II. Shared Bus
III. Language
IV. Password
V. Message Length
• I. Address
Every unit connected to a RS485 bus must have a unique address which distinguishes it from the other units connected to the same bus. This menu is used to confi gure the address of the UMX-02/0. The default address is 1.
1. Select the option Address from the Common Options menu.
2. Press MENU/OK.
3. Use the numeric keypad to enter a number between 1 and 99.
4. Press MENU/OK.
P a s s w o r d M e s s a g e L e n g t h
C o m m o n O p t i o n sA d d r e s s
S h a r e d B u s L a n g u a g e
Address ...
...
* * * * * * * * * * * *
Castellano
English
Catala
60 seconds
120 seconds
240 seconds
Unlimited
Common Options UMX Number
UMX list that
Password Password Password
Language
Message Length
Share BUS?
Type old code: Type new code: Retype new code
Shared Bus
Language
Password
Message Length
Configurations
Audio Inputs
MENU
Configurations
Properties
Audio Outputs
User
Contacts Inputs
Contacts Outputs
Groups
Common options
77
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
• II. Shared Bus
If several UMX-02/0 units are interconnected by means of the expansion connector of the audio bus, this parameter must be confi gured.
1. Select the option Shared Bus from the Common Options menu.
2. Press MENU/OK.
3. Using the numeric keypad, enter the address of each of the UMX-02/0 units that share the bus. Press 5 to separate each address from the next one.
4. It is also necessary to enter the address of the UMX-02/0 which is being confi gured.
5. Press MENU/OK.
• III. Language
This enables the user to change the language of the menus.
1. Select the option Language from the Common Options menu.
2. Press MENU/OK.
3. Using the navigation keys, select a language and press 5 .
4. Press MENU/OK to save the data.
• IV. Password
Use this option to change the password. The system supports values from 1 to 9999.
The default password is 1234.
1. Select the option Password from the Common Options menu.
2. Press MENU/OK.
3. Enter the existing password and press MENU/OK.
4. Enter the new password and press MENU/OK.
5. Enter the new password once again and press MENU/OK.
• V. Message Length
Use this option to establish a maximum message length.
1. Select the option Message Length from the Common Options menu.
2. Press MENU/OK.
3. Using the navigation keys, select a maximum message length value and press key 5 .
60 seconds
120 seconds
240 seconds
Unlimited
4. Press MENU/OK to save the data.
78
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
4. Properties Menu
This menu shows the confi guration of the UMX-O2/0
4.1. Access to the Properties menu
1. Press MENU/OK.
2. Using the navigation keys, select Properties and press MENU/OK.
The following options appear:
• Audio Inputs: This shows the confi gurations of the audio inputs that are enabled.
• Audio Outputs: This shows the confi gurations of the audio outputs that are enabled.
• Contact Inputs: This shows the confi gurations of the contact inputs.
• Contact Outputs: This shows the confi gurations of the contact outputs.
4.2. Viewing the confi gurations
1. Using the navigation keys, select an option and press MENU/OK.
2. Use the navigation keys or the MENU/OK key to view each of the confi gurations in accordance with the following fl ow diagrams.
3. Press the CANCEL key to exit.
Flow diagram of the Audio Input properties
MENU/OK
Label
Label
Label
InputNumber
xx01_ix
xx02_ix
xx03_ix
InputNumber
InputNumber
Program/Priority
Program/Priority
Program/Priority
AssociatedOutputs
AssociatedOutputs
AssociatedOutputs
PriorityLevel
PriorityLevel
PriorityLevel
Gong
Gong
Gong
Queues
Queues
Queues
Enabled/Disabled
Enabled/Disabled
Enabled/Disabled
79
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
Flow diagram of the Audio Output properties
Flow diagram of the Contact Input properties
Flow diagram of the Contact Output properties
Label
Label
Label
OutputNumber
xx01_ox
xx02_ox
xx03_ox
OutputNumber
OutputNumber
ProgramVolume,
Bass & Treble
ProgramVolume,
Bass & Treble
ProgramVolume,
Bass & Treble
PriorityVolume,
Bass & Treble
PriorityVolume,
Bass & Treble
PriorityVolume,
Bass & Treble
AssociatedInputs
AssociatedInputs
AssociatedInputs
Enabled/Disabled
Enabled/Disabled
Enabled/Disabled
Equalizations
Equalizations
Equalizations
Card 1CI Ct 1
Card 1Ct 2CI
Card 1Ct 8CI
LabelInputNumber
Functionality AssociatedNumber
AssociatedOutputs/Groups
PriorityLevel Gong
LabelInputNumber
Functionality AssociatedNumber
AssociatedOutputs/Groups
PriorityLevel Gong
LabelInputNumber
Functionality AssociatedNumber
AssociatedOutputs/Groups
PriorityLevel Gong
Card 1CO Ct 1
Card 1CO Ct 2
Card 1CO Ct 8
LabelOutputNumber
Functionality StartEvent
EndEvent
Input/GroupAssociated
Group
LabelOutputNumber
Functionality StartEvent
EndEvent
Input/GroupAssociated
Group
LabelOutputNumber
Functionality StartEvent
EndEvent
Input/GroupAssociated
Group
80
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
5.1. Login
Through this option users can enter the password in order to modify the confi gurations.
The default password is 1234. To change it, use the menu Confi gurations / Common Options / Password.
Select User
Press MENU/OK
Select Login
Press MENU/OK
Enter the password
Press MENU/OK
Press CANCEL to return to the main menu.
5.2. Logout
Through this option the access to confi gurations can be deactivated, once the confi guration operations have been completed.
If ten minutes elapse without a key being pressed, an automatic Logout is performed.
Select User
Press MENU/OK
Select Logout
Press MENU/OK
Press CANCEL to return to the main menu.
5. User Menu
M E N U C o n f i g u r a t i o n s P r o p e r t i e s
U s e r
U s e rL o g i n
L o g o u t
L o g i nE n t e r P a s s w o r d 1 2 3 4
L o g i nP a s s w o r d
c o r r e c t
M E N U C o n f i g u r a t i o n s P r o p e r t i e s
U s e r
U s e r L o g i n
L o g o u t
L o g o u tS e s s i o nE n d e d1 2 3 4
Configurations
Login
MENU
User
Properties
Logout
User
Login
Enter Password
* * * *
81
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
6. Log Menu
This is a record of communication events.
It is used to view Overrun or Framing errors.
7. Confi guration examples. Practical cases
7.1. Example of installation with subzones
1. Confi guration of audio inputs:
Confi gurations / Audio Inputs /
0101_i10001 0102_i10002 0103_i10003 0104_i10004
Input Number 1 2 3 4
Pro / Pri Priority Priority Priority Program
Asoc. Outputs 02+04+06 01+02+04+05+08 01+02+03+04+05+06+07+08 -
Prior. Level 1 1 1 -
Gong On On On Off
Rp1 Off Off Off Off
Queues On* / off On* / off On* / off Off
Enab. / Disab. Enabled Enabled Enabled Enabled
* only on UMX-EGC
2. Confi guration of audio outputs:
Confi gurations / Audio Outputs /
0105_o10005 0106_o10006
Output Number 1 2
Volume ... ...
Assoc. Input 4 0
Enab. / Disab. Enabled Enabled
3. Creation of groups:
Confi gurations / Groups / New /
Group Number 1 2 3 4 5 6 7 8
Outputs / Groups 2 2 2 2 2 2 2 24. Confi guration of contacts outputs:
Confi gurations / Contact Outputs / Card 4 /
Contact 1 Contact 2 Contact 3 Contact 4 Contact 5 Contact 6 Contact 7 Contact 8
Ct Output No. 1 2 3 4 5 6 7 8
Functionality Groups 01 Groups 02 Groups 03 Groups 04 Groups 05 Groups 06 Groups 07 Groups 08
To create subzones, contact output cards (UMX-SCT) must be used.
Basically, as many groups must be created as the subzones that you wish to have, and each contact output must be associated with one of the groups created. The groups corresponding to the subzones to be selected by each input must be confi gured as associated outputs at each input.
UMX-2E
UMX-2E
MD94/R
MD94/R
MD94
Music
program
Subzones
1, 2, 4, 5 & 8
All call
Subzones
2, 4 & 6
UMX-02/0
UMX-2S
UM
X-0
2/0
inte
rnalB
US
UMX-SCT
UP247
UP247
MC-12L
Subzone 1
Subzone 2
Subzone 3
Subzone 4
Subzone 5
Subzone 6
Subzone 7
Subzone 8
Program
amplifier
Priority
amplifier
1
2
3
4
5
6
7
8
i1
o1
i3
i2
o2
1
8
i4
Only advanced users
82
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
7.2. Example of installation with microphone with zone selection
1. Confi guration of audio inputs:
Confi gurations / Audio inputs /
0101_i10001 0101_i10002
Input Number 1 2
Pro / Pri Program Priority
Assoc. Outputs - 1+2+3+4+5+6
Prior. Level - 1
Gong Off On
Rp1 Off Off
Queues Off On* / off
Enab. / Disab. Enabled Enabled
* only on UMX-EGC
2. Confi guration of audio outputs:
Confi gurations / Audio Outputs /
0105_o10005 0106_o10006 0107_o10007 0108_o10008 0109_o10009
Output Number 1 2 3 4 4
Volume ... ... ... ... ...
Assoc. Input 1 1 1 1 1
Enab. / Disab. Enabled Enabled Enabled Enabled Enabled
3.Confi guration of contact inputs:
Confi gurations / Contact inputs / Card 2 /
Contact 1 Contact 2 Contact 3 Contact 4 Contact 5
Ct Input No. 1 2 3 4 5
Functionality Input Selection
Input 1 Input Selection
Input 1 Input Selection
Input 1 Input Selection
Input 1 Input Selection
Input 1
Output 1 Output 2 Output 3 Output 4 Output 5
UMX-2EMD-94R6
Priority activation
UMX-02/0
UMX-2S
UMX-2S
UMX-2S
UM
X-0
2/0
inte
rnalB
US
Zone 1
amplifier
Zone 3
amplifier
Zone 5
amplifier
Zone 2
amplifier
Zone 4
amplifier
UMX-ECT
Ct 1Zone 1
Ct 2Zone 2
Ct 3Zone 3
Ct 4Zone 4
Ct 5Zone 5
i1
i2
Music
program
o1
o2
o3
o4
o5
For the selection of zones from a console, the contact input card (UMX-ECT) must be used.
In the following block diagram, a microphone with zone selection activates the various outputs through the contact inputs of the UMX-ECT card.
83
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
8. Software and Firmware versions
The functionalities described in this Users manual are valid for fi rmware and software versions equal or superior to:
Firmware UMX-02/0 Version 11.8
Software P.A. Manager Version 2.5 / Revisión 3391.19997
9. Document Version Tracking
Rev Date Modifi cations Content Written by:
1.0 March 10 Initial document: UMX-01/0 Version 1.2Updating from UMX-01/0 to UMX-02/0 (model change in texts and fi gures)The following paragraphs are added or modifi ed:(I) 4.4. DB-9 download connector(I) 5. Technical specifi cations(II) 8. Software and Firmware versions(II) 9. Document Version Tracking
R+D Depart-ment
Approved By Function Date
Ferran Gironès i Puig R+D Director 03/2010
84
UMX-02/0
Eng
ENGLISH
UMX-02/0 v1.0
1. GUARANTEE CERTIFICATE
1. OPTIMUS S.A. guarantees that its products are free from material and manufacturing defects when they are fi rst delivered to the purchaser.
2. In accordance with the conditions outlined here, OPTIMUS S.A. guarantees its products for two (2) years from the date on which the purchaser acquires the product. If, within this guarantee period, defects appear which are not due to factors outlined in section 2, OPTIMUS S.A. shall replace or repair the unit using equivalent, new or reconstructed replacement parts, as it deems fi t. If replacement parts are applied which improve the unit, OPTIMUS S.A. reserves the right to charge the client for the additional cost of these components.
3. No guarantee benefi ts shall be provided other than those cited here.
4. In order to claim the guarantee rights, it shall be an essential requirement to present the original purchase invoice or the guarantee certifi cate.
2. GUARANTEE PROVISIONS
1. In the event that the product had to be modifi ed or adapted to comply with local requirements concerning technical specifi cations or safety, and if the country in question is not the country for which the product was originally designed and manufactured, defects are not considered to be material or manufacturing defects. Furthermore, the guarantee does not cover the execution of these modifi cations or adaptations, regardless of whether or not they have been carried out correctly.
Nor shall OPTIMUS S.A. be responsible for any costs under this guarantee for these types of modifi cations.
2. The guarantee shall not entitle the purchaser to inspection or free maintenance or repair of the unit, particularly if the defects are due to inappropriate use. Nor do the guarantee rights cover defects in wearing parts that become worn as a result of normal wear and tear. Wearing parts are, in particular, potentiometers, switches/keys, and similar parts.
3. The guarantee does not cover defects in the equipment unit caused by:
• Abuse or incorrect use of the unit for purposes other than those for which it is intended, in non-compliance with the service and maintenance instructions specifi ed in the Manual and/or Technical Instructions for the unit.
• Connection or use of the product in a manner that does not correspond to the technical or safety requirements of the country in which the unit is used.
• Installation in conditions other than those indicated in the Manual and/or
Technical Instructions.
• Defi ciency or interruptions in the electricity supply or installation defects which imply use in abnormal conditions.
• Damage caused by other equipment units that are connected to the product.
• The use or installation of Software (programmes), interfaces, parts or supplies not provided and/or not authorised by OPTIMUS S.A.
• Failure to use the original packaging for transportation.
• Damage caused by force majeure or other causes not attributable to OPTIMUS S.A.
4. The following elements are not covered by this guarantee:
• All plastic surfaces and all parts exposed to outdoor conditions which have been scratched or damaged as a result of normal or abnormal use.
• Breakages, knocks, damage due to a fall or scratches caused by moving the unit in any way.
• Damage caused by tests, use, maintenance, installation or inappropriate adjustments, or as a result of any alteration or modifi cation of any kind not carried out by a Service Authorised by OPTIMUS S.A. in compliance with this guarantee.
• Damage to persons or property that might be caused by the improper use of the equipment, including lack of maintenance.
5. The guarantee shall not be valid whenever the following is observed:
• Amendments or corrections made to the details of the guarantee certifi cate or purchase invoice.
• Failure to produce the original invoice or the absence of a date on this.
• Absence of the serial or batch number on the equipment.
6. In the case of personal computers, the guarantee will not cover the
elimination of computer viruses, the restoration of programmes damaged by these or the reinstallation of the disk following its deletion.
7. The rights of this guarantee are invalidated if the product has been repaired or opened by staff unauthorised by OPTIMUS S.A. or by the client himself.
8. If OPTIMUS S.A. were to establish before the client that the damage affecting the unit does not entitle a claim to be made under the guarantee, the costs of checking the equipment incurred by OPTIMUS S.A. shall be borne by the client.
9. Products not covered by the guarantee shall only be repaired once payment has been effected by the client. In the event that the guarantee rights do not apply, OPTIMUS S.A. shall duly inform the client. If, within a period of 6 weeks from this communication, no written repair order is received from the client confi rming acceptance of the costs, OPTIMUS S.A. shall return the unit in question to the client. In this case, the transport and packaging costs shall be invoiced separately and payment shall be made on delivery. In the event that a repair order is sent by the client, confi rming that he assumes the costs of repair, the transport and packaging costs shall be invoiced additionally, and also separately.
10. If the equipment needs to be transferred to the Authorised Service Centre, transportation shall be effected by the responsible party according to the guarantee, who will also bear the freight and insurance costs.
11. In the event of a defect, OPTIMUS S.A. guarantees that the repair and/or replacement of parts so that the unit operates correctly will be made within a period of no more than 30 days. Nevertheless, OPTIMUS S.A. would like to clarify that the normal period does not exceed 30 days.
12. All parts or products replaced as part of the guarantee services shall become the property of OPTIMUS S.A.
3. TRANSFER OF GUARANTEE
The guarantee is solely awarded to the original purchaser (principal client) and is not transferable. With the exception of OPTIMUS S.A., no third party (dealers, etc.) is authorised to award additional guarantees on behalf of OPTIMUS S.A
4. CLAIMS FOR DAMAGE
In the event that OPTIMUS S.A. cannot provide a suitable guarantee service, the purchaser shall not be entitled to claim any indemnity for damages arising. The responsibility held by OPTIMUS S.A. is limited in all cases to the invoicing price of the product.
5. RELATION WITH OTHER GUARANTEE RIGHTS AND NATIONAL LAW
1. This guarantee does not affect the rights of the purchaser with respect to the vendor arising from the contract of sale accomplished.
2. These conditions of the guarantee provided by OPTIMUS S.A. are valid as long as they do not contradict the corresponding national law on guarantee provisions.
3. OPTIMUS S.A. guarantees that this product complies with the safety regulations in force in the country.
THIS LIMITED GUARANTEE DECLARATION IS THE EXCLUSIVE GUARANTEE OFFERED BY OPTIMUS S.A. ALL OTHER EXPLICIT OR IMPLICIT GUARANTEES ARE EXCLUDED, AND THIS ALSO APPLIES TO GUARANTEES OF MARKETABILITY AND SUITABILITY FOR A PARTICULAR PURPOSE. (EXCEPT WHEN THESE GUARANTEES ARE REQUIRED BY AN APPLICABLE LAW). NO GUARANTEE, EITHER EXPLICIT OR IMPLICIT, SHALL BE APPLIED ONCE THE GUARANTEE PERIOD HAS EXPIRED.
OPTIMUS S.A.After-Sales ServiceC/ Barcelona 10117003 - GIRONATel. 902 151 96 / 972 203 300
Fax. 972 21 84 13
e-mail : [email protected] 1999/44/CE
10. Guarantee
CENTRAL: DELEGACIONES: REPRESENTANTES:
E-17003 GIRONA (SPAIN)
Barcelona, 101
Tel. 902 117 167
Tel. 972 203 300
Fax 972 218 413
E-mail: [email protected]
www.optimus.es
E-08015 BARCELONA
Avda.Roma, 84
Tel. 902 117 187
Tel. 932 262 501
Fax 932 265 209
E-mail: [email protected]
06010 BADAJOZ
Cipriano J.S. del Amo
Jacobo Rodriguez Pereira,11
Tel. 924 207 483
Fax 924 200 115
E-mail: [email protected]
Presupuestos y Ofertas
U.P.O. Tel. 932 282 078
Fax 932 282 079
SALAMANCA
Manuel Martín
Tel./Fax 923 185 149
E-mail: [email protected]ón al Cliente
Tel. 902 151 963
E-28019 MADRID
Antonio López, 56
Tel. 902 117 168
Tel. 914 609 860
Fax 914 604 008
E-mail: [email protected]
Oficina Técnica
Tel. 972 222 109
Fax 972 221 767
E-mail: [email protected]
ZARAGOZA
Dpto. Técnico Comercial
Tel. 902 117 187Presupuestos y Ofertas
U.P.O. Tel. 914 609 861
Fax 914 609 862
Export Department
Tel. +34 972 203 300
Fax +34 972 218 413
E-mail: [email protected]
E-48006 BILBO
Zumalakárregui, 48
Tel. 902 117 189
Tel. 944 598 116
Fax 944 730 596
E-mail: [email protected]
E-46015 VALENCIA
Av. Maestro Rodrigo, 101
Tel. 963 461 039
Fax 963 461 038
E-mail: [email protected]
E-41007 SEVILLA
Ruiz de Alarcón, 25
Tel. 954 578 280
Fax 954 572 188
E-mail: [email protected]
E-15006 A CORUÑA
Novoa Santos, 27
Tel. 981 298 400
Fax 981 298 506
E-mail: [email protected]
E-29004 MALAGA
Diderot, 9 Bq. F Nv. 47A
Plg. Ind. Guadalorce
Tel. 952 232 947
Fax 952 236 578
Email: [email protected]
E-30009 MURCIA
Sierra Peñarrubia, 1
Esq. c/ Maravillas
Tel. 968 284 748
Fax 968 282 637
Email: [email protected]
E-07009 PALMA de MALLORCA
Tel. 971 433 561
Fax 971 430 298
E-mail: [email protected]
PAMPLONA (Navarra)
Tel. 659 543 763
GIJON (Asturias)
Tel. 985 130 343
659 583 506